Commit | Line | Data |
---|---|---|
b453872c JG |
1 | /* |
2 | * Merged with mainline ieee80211.h in Aug 2004. Original ieee802_11 | |
3 | * remains copyright by the original authors | |
4 | * | |
5 | * Portions of the merged code are based on Host AP (software wireless | |
6 | * LAN access point) driver for Intersil Prism2/2.5/3. | |
7 | * | |
8 | * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen | |
9 | * <jkmaline@cc.hut.fi> | |
10 | * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi> | |
11 | * | |
12 | * Adaption to a generic IEEE 802.11 stack by James Ketrenos | |
13 | * <jketreno@linux.intel.com> | |
14 | * Copyright (c) 2004, Intel Corporation | |
15 | * | |
16 | * This program is free software; you can redistribute it and/or modify | |
17 | * it under the terms of the GNU General Public License version 2 as | |
18 | * published by the Free Software Foundation. See README and COPYING for | |
19 | * more details. | |
20 | */ | |
21 | #ifndef IEEE80211_H | |
22 | #define IEEE80211_H | |
23 | #include <linux/if_ether.h> /* ETH_ALEN */ | |
24 | #include <linux/kernel.h> /* ARRAY_SIZE */ | |
25 | ||
26 | #if WIRELESS_EXT < 17 | |
27 | #define IW_QUAL_QUAL_INVALID 0x10 | |
28 | #define IW_QUAL_LEVEL_INVALID 0x20 | |
29 | #define IW_QUAL_NOISE_INVALID 0x40 | |
30 | #define IW_QUAL_QUAL_UPDATED 0x1 | |
31 | #define IW_QUAL_LEVEL_UPDATED 0x2 | |
32 | #define IW_QUAL_NOISE_UPDATED 0x4 | |
33 | #endif | |
34 | ||
35 | #define IEEE80211_DATA_LEN 2304 | |
36 | /* Maximum size for the MA-UNITDATA primitive, 802.11 standard section | |
37 | 6.2.1.1.2. | |
38 | ||
39 | The figure in section 7.1.2 suggests a body size of up to 2312 | |
40 | bytes is allowed, which is a bit confusing, I suspect this | |
41 | represents the 2304 bytes of real data, plus a possible 8 bytes of | |
42 | WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */ | |
43 | ||
44 | ||
45 | #define IEEE80211_HLEN 30 | |
46 | #define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN) | |
47 | ||
48 | struct ieee80211_hdr { | |
49 | u16 frame_ctl; | |
50 | u16 duration_id; | |
51 | u8 addr1[ETH_ALEN]; | |
52 | u8 addr2[ETH_ALEN]; | |
53 | u8 addr3[ETH_ALEN]; | |
54 | u16 seq_ctl; | |
55 | u8 addr4[ETH_ALEN]; | |
56 | } __attribute__ ((packed)); | |
57 | ||
58 | struct ieee80211_hdr_3addr { | |
59 | u16 frame_ctl; | |
60 | u16 duration_id; | |
61 | u8 addr1[ETH_ALEN]; | |
62 | u8 addr2[ETH_ALEN]; | |
63 | u8 addr3[ETH_ALEN]; | |
64 | u16 seq_ctl; | |
65 | } __attribute__ ((packed)); | |
66 | ||
67 | enum eap_type { | |
68 | EAP_PACKET = 0, | |
69 | EAPOL_START, | |
70 | EAPOL_LOGOFF, | |
71 | EAPOL_KEY, | |
72 | EAPOL_ENCAP_ASF_ALERT | |
73 | }; | |
74 | ||
75 | static const char *eap_types[] = { | |
76 | [EAP_PACKET] = "EAP-Packet", | |
77 | [EAPOL_START] = "EAPOL-Start", | |
78 | [EAPOL_LOGOFF] = "EAPOL-Logoff", | |
79 | [EAPOL_KEY] = "EAPOL-Key", | |
80 | [EAPOL_ENCAP_ASF_ALERT] = "EAPOL-Encap-ASF-Alert" | |
81 | }; | |
82 | ||
83 | static inline const char *eap_get_type(int type) | |
84 | { | |
85 | return (type >= ARRAY_SIZE(eap_types)) ? "Unknown" : eap_types[type]; | |
86 | } | |
87 | ||
88 | struct eapol { | |
89 | u8 snap[6]; | |
90 | u16 ethertype; | |
91 | u8 version; | |
92 | u8 type; | |
93 | u16 length; | |
94 | } __attribute__ ((packed)); | |
95 | ||
96 | #define IEEE80211_3ADDR_LEN 24 | |
97 | #define IEEE80211_4ADDR_LEN 30 | |
98 | #define IEEE80211_FCS_LEN 4 | |
99 | ||
100 | #define MIN_FRAG_THRESHOLD 256U | |
101 | #define MAX_FRAG_THRESHOLD 2346U | |
102 | ||
103 | /* Frame control field constants */ | |
104 | #define IEEE80211_FCTL_VERS 0x0002 | |
105 | #define IEEE80211_FCTL_FTYPE 0x000c | |
106 | #define IEEE80211_FCTL_STYPE 0x00f0 | |
107 | #define IEEE80211_FCTL_TODS 0x0100 | |
108 | #define IEEE80211_FCTL_FROMDS 0x0200 | |
109 | #define IEEE80211_FCTL_MOREFRAGS 0x0400 | |
110 | #define IEEE80211_FCTL_RETRY 0x0800 | |
111 | #define IEEE80211_FCTL_PM 0x1000 | |
112 | #define IEEE80211_FCTL_MOREDATA 0x2000 | |
113 | #define IEEE80211_FCTL_WEP 0x4000 | |
114 | #define IEEE80211_FCTL_ORDER 0x8000 | |
115 | ||
116 | #define IEEE80211_FTYPE_MGMT 0x0000 | |
117 | #define IEEE80211_FTYPE_CTL 0x0004 | |
118 | #define IEEE80211_FTYPE_DATA 0x0008 | |
119 | ||
120 | /* management */ | |
121 | #define IEEE80211_STYPE_ASSOC_REQ 0x0000 | |
122 | #define IEEE80211_STYPE_ASSOC_RESP 0x0010 | |
123 | #define IEEE80211_STYPE_REASSOC_REQ 0x0020 | |
124 | #define IEEE80211_STYPE_REASSOC_RESP 0x0030 | |
125 | #define IEEE80211_STYPE_PROBE_REQ 0x0040 | |
126 | #define IEEE80211_STYPE_PROBE_RESP 0x0050 | |
127 | #define IEEE80211_STYPE_BEACON 0x0080 | |
128 | #define IEEE80211_STYPE_ATIM 0x0090 | |
129 | #define IEEE80211_STYPE_DISASSOC 0x00A0 | |
130 | #define IEEE80211_STYPE_AUTH 0x00B0 | |
131 | #define IEEE80211_STYPE_DEAUTH 0x00C0 | |
132 | ||
133 | /* control */ | |
134 | #define IEEE80211_STYPE_PSPOLL 0x00A0 | |
135 | #define IEEE80211_STYPE_RTS 0x00B0 | |
136 | #define IEEE80211_STYPE_CTS 0x00C0 | |
137 | #define IEEE80211_STYPE_ACK 0x00D0 | |
138 | #define IEEE80211_STYPE_CFEND 0x00E0 | |
139 | #define IEEE80211_STYPE_CFENDACK 0x00F0 | |
140 | ||
141 | /* data */ | |
142 | #define IEEE80211_STYPE_DATA 0x0000 | |
143 | #define IEEE80211_STYPE_DATA_CFACK 0x0010 | |
144 | #define IEEE80211_STYPE_DATA_CFPOLL 0x0020 | |
145 | #define IEEE80211_STYPE_DATA_CFACKPOLL 0x0030 | |
146 | #define IEEE80211_STYPE_NULLFUNC 0x0040 | |
147 | #define IEEE80211_STYPE_CFACK 0x0050 | |
148 | #define IEEE80211_STYPE_CFPOLL 0x0060 | |
149 | #define IEEE80211_STYPE_CFACKPOLL 0x0070 | |
150 | ||
151 | #define IEEE80211_SCTL_FRAG 0x000F | |
152 | #define IEEE80211_SCTL_SEQ 0xFFF0 | |
153 | ||
154 | ||
155 | /* debug macros */ | |
156 | ||
157 | #ifdef CONFIG_IEEE80211_DEBUG | |
158 | extern u32 ieee80211_debug_level; | |
159 | #define IEEE80211_DEBUG(level, fmt, args...) \ | |
160 | do { if (ieee80211_debug_level & (level)) \ | |
161 | printk(KERN_DEBUG "ieee80211: %c %s " fmt, \ | |
162 | in_interrupt() ? 'I' : 'U', __FUNCTION__ , ## args); } while (0) | |
163 | #else | |
164 | #define IEEE80211_DEBUG(level, fmt, args...) do {} while (0) | |
165 | #endif /* CONFIG_IEEE80211_DEBUG */ | |
166 | ||
167 | /* | |
168 | * To use the debug system; | |
169 | * | |
170 | * If you are defining a new debug classification, simply add it to the #define | |
171 | * list here in the form of: | |
172 | * | |
173 | * #define IEEE80211_DL_xxxx VALUE | |
174 | * | |
175 | * shifting value to the left one bit from the previous entry. xxxx should be | |
176 | * the name of the classification (for example, WEP) | |
177 | * | |
178 | * You then need to either add a IEEE80211_xxxx_DEBUG() macro definition for your | |
179 | * classification, or use IEEE80211_DEBUG(IEEE80211_DL_xxxx, ...) whenever you want | |
180 | * to send output to that classification. | |
181 | * | |
182 | * To add your debug level to the list of levels seen when you perform | |
183 | * | |
184 | * % cat /proc/net/ipw/debug_level | |
185 | * | |
186 | * you simply need to add your entry to the ipw_debug_levels array. | |
187 | * | |
188 | * If you do not see debug_level in /proc/net/ipw then you do not have | |
189 | * CONFIG_IEEE80211_DEBUG defined in your kernel configuration | |
190 | * | |
191 | */ | |
192 | ||
193 | #define IEEE80211_DL_INFO (1<<0) | |
194 | #define IEEE80211_DL_WX (1<<1) | |
195 | #define IEEE80211_DL_SCAN (1<<2) | |
196 | #define IEEE80211_DL_STATE (1<<3) | |
197 | #define IEEE80211_DL_MGMT (1<<4) | |
198 | #define IEEE80211_DL_FRAG (1<<5) | |
199 | #define IEEE80211_DL_EAP (1<<6) | |
200 | #define IEEE80211_DL_DROP (1<<7) | |
201 | ||
202 | #define IEEE80211_DL_TX (1<<8) | |
203 | #define IEEE80211_DL_RX (1<<9) | |
204 | ||
205 | #define IEEE80211_ERROR(f, a...) printk(KERN_ERR "ieee80211: " f, ## a) | |
206 | #define IEEE80211_WARNING(f, a...) printk(KERN_WARNING "ieee80211: " f, ## a) | |
207 | #define IEEE80211_DEBUG_INFO(f, a...) IEEE80211_DEBUG(IEEE80211_DL_INFO, f, ## a) | |
208 | ||
209 | #define IEEE80211_DEBUG_WX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_WX, f, ## a) | |
210 | #define IEEE80211_DEBUG_SCAN(f, a...) IEEE80211_DEBUG(IEEE80211_DL_SCAN, f, ## a) | |
211 | #define IEEE80211_DEBUG_STATE(f, a...) IEEE80211_DEBUG(IEEE80211_DL_STATE, f, ## a) | |
212 | #define IEEE80211_DEBUG_MGMT(f, a...) IEEE80211_DEBUG(IEEE80211_DL_MGMT, f, ## a) | |
213 | #define IEEE80211_DEBUG_FRAG(f, a...) IEEE80211_DEBUG(IEEE80211_DL_FRAG, f, ## a) | |
214 | #define IEEE80211_DEBUG_EAP(f, a...) IEEE80211_DEBUG(IEEE80211_DL_EAP, f, ## a) | |
215 | #define IEEE80211_DEBUG_DROP(f, a...) IEEE80211_DEBUG(IEEE80211_DL_DROP, f, ## a) | |
216 | #define IEEE80211_DEBUG_TX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_TX, f, ## a) | |
217 | #define IEEE80211_DEBUG_RX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_RX, f, ## a) | |
218 | #include <linux/netdevice.h> | |
219 | #include <linux/wireless.h> | |
220 | #include <linux/if_arp.h> /* ARPHRD_ETHER */ | |
221 | ||
222 | #ifndef WIRELESS_SPY | |
223 | #define WIRELESS_SPY // enable iwspy support | |
224 | #endif | |
225 | #include <net/iw_handler.h> // new driver API | |
226 | ||
227 | #ifndef ETH_P_PAE | |
228 | #define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */ | |
229 | #endif /* ETH_P_PAE */ | |
230 | ||
231 | #define ETH_P_PREAUTH 0x88C7 /* IEEE 802.11i pre-authentication */ | |
232 | ||
233 | #ifndef ETH_P_80211_RAW | |
234 | #define ETH_P_80211_RAW (ETH_P_ECONET + 1) | |
235 | #endif | |
236 | ||
237 | /* IEEE 802.11 defines */ | |
238 | ||
239 | #define P80211_OUI_LEN 3 | |
240 | ||
241 | struct ieee80211_snap_hdr { | |
242 | ||
243 | u8 dsap; /* always 0xAA */ | |
244 | u8 ssap; /* always 0xAA */ | |
245 | u8 ctrl; /* always 0x03 */ | |
246 | u8 oui[P80211_OUI_LEN]; /* organizational universal id */ | |
247 | ||
248 | } __attribute__ ((packed)); | |
249 | ||
250 | #define SNAP_SIZE sizeof(struct ieee80211_snap_hdr) | |
251 | ||
252 | #define WLAN_FC_GET_TYPE(fc) ((fc) & IEEE80211_FCTL_FTYPE) | |
253 | #define WLAN_FC_GET_STYPE(fc) ((fc) & IEEE80211_FCTL_STYPE) | |
254 | ||
255 | #define WLAN_GET_SEQ_FRAG(seq) ((seq) & IEEE80211_SCTL_FRAG) | |
256 | #define WLAN_GET_SEQ_SEQ(seq) ((seq) & IEEE80211_SCTL_SEQ) | |
257 | ||
258 | /* Authentication algorithms */ | |
259 | #define WLAN_AUTH_OPEN 0 | |
260 | #define WLAN_AUTH_SHARED_KEY 1 | |
261 | ||
262 | #define WLAN_AUTH_CHALLENGE_LEN 128 | |
263 | ||
264 | #define WLAN_CAPABILITY_BSS (1<<0) | |
265 | #define WLAN_CAPABILITY_IBSS (1<<1) | |
266 | #define WLAN_CAPABILITY_CF_POLLABLE (1<<2) | |
267 | #define WLAN_CAPABILITY_CF_POLL_REQUEST (1<<3) | |
268 | #define WLAN_CAPABILITY_PRIVACY (1<<4) | |
269 | #define WLAN_CAPABILITY_SHORT_PREAMBLE (1<<5) | |
270 | #define WLAN_CAPABILITY_PBCC (1<<6) | |
271 | #define WLAN_CAPABILITY_CHANNEL_AGILITY (1<<7) | |
272 | ||
273 | /* Status codes */ | |
274 | #define WLAN_STATUS_SUCCESS 0 | |
275 | #define WLAN_STATUS_UNSPECIFIED_FAILURE 1 | |
276 | #define WLAN_STATUS_CAPS_UNSUPPORTED 10 | |
277 | #define WLAN_STATUS_REASSOC_NO_ASSOC 11 | |
278 | #define WLAN_STATUS_ASSOC_DENIED_UNSPEC 12 | |
279 | #define WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG 13 | |
280 | #define WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION 14 | |
281 | #define WLAN_STATUS_CHALLENGE_FAIL 15 | |
282 | #define WLAN_STATUS_AUTH_TIMEOUT 16 | |
283 | #define WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA 17 | |
284 | #define WLAN_STATUS_ASSOC_DENIED_RATES 18 | |
285 | /* 802.11b */ | |
286 | #define WLAN_STATUS_ASSOC_DENIED_NOSHORT 19 | |
287 | #define WLAN_STATUS_ASSOC_DENIED_NOPBCC 20 | |
288 | #define WLAN_STATUS_ASSOC_DENIED_NOAGILITY 21 | |
289 | ||
290 | /* Reason codes */ | |
291 | #define WLAN_REASON_UNSPECIFIED 1 | |
292 | #define WLAN_REASON_PREV_AUTH_NOT_VALID 2 | |
293 | #define WLAN_REASON_DEAUTH_LEAVING 3 | |
294 | #define WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY 4 | |
295 | #define WLAN_REASON_DISASSOC_AP_BUSY 5 | |
296 | #define WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA 6 | |
297 | #define WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA 7 | |
298 | #define WLAN_REASON_DISASSOC_STA_HAS_LEFT 8 | |
299 | #define WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH 9 | |
300 | ||
301 | ||
302 | /* Information Element IDs */ | |
303 | #define WLAN_EID_SSID 0 | |
304 | #define WLAN_EID_SUPP_RATES 1 | |
305 | #define WLAN_EID_FH_PARAMS 2 | |
306 | #define WLAN_EID_DS_PARAMS 3 | |
307 | #define WLAN_EID_CF_PARAMS 4 | |
308 | #define WLAN_EID_TIM 5 | |
309 | #define WLAN_EID_IBSS_PARAMS 6 | |
310 | #define WLAN_EID_CHALLENGE 16 | |
311 | #define WLAN_EID_RSN 48 | |
312 | #define WLAN_EID_GENERIC 221 | |
313 | ||
314 | #define IEEE80211_MGMT_HDR_LEN 24 | |
315 | #define IEEE80211_DATA_HDR3_LEN 24 | |
316 | #define IEEE80211_DATA_HDR4_LEN 30 | |
317 | ||
318 | ||
319 | #define IEEE80211_STATMASK_SIGNAL (1<<0) | |
320 | #define IEEE80211_STATMASK_RSSI (1<<1) | |
321 | #define IEEE80211_STATMASK_NOISE (1<<2) | |
322 | #define IEEE80211_STATMASK_RATE (1<<3) | |
323 | #define IEEE80211_STATMASK_WEMASK 0x7 | |
324 | ||
325 | ||
326 | #define IEEE80211_CCK_MODULATION (1<<0) | |
327 | #define IEEE80211_OFDM_MODULATION (1<<1) | |
328 | ||
329 | #define IEEE80211_24GHZ_BAND (1<<0) | |
330 | #define IEEE80211_52GHZ_BAND (1<<1) | |
331 | ||
332 | #define IEEE80211_CCK_RATE_1MB 0x02 | |
333 | #define IEEE80211_CCK_RATE_2MB 0x04 | |
334 | #define IEEE80211_CCK_RATE_5MB 0x0B | |
335 | #define IEEE80211_CCK_RATE_11MB 0x16 | |
336 | #define IEEE80211_OFDM_RATE_6MB 0x0C | |
337 | #define IEEE80211_OFDM_RATE_9MB 0x12 | |
338 | #define IEEE80211_OFDM_RATE_12MB 0x18 | |
339 | #define IEEE80211_OFDM_RATE_18MB 0x24 | |
340 | #define IEEE80211_OFDM_RATE_24MB 0x30 | |
341 | #define IEEE80211_OFDM_RATE_36MB 0x48 | |
342 | #define IEEE80211_OFDM_RATE_48MB 0x60 | |
343 | #define IEEE80211_OFDM_RATE_54MB 0x6C | |
344 | #define IEEE80211_BASIC_RATE_MASK 0x80 | |
345 | ||
346 | #define IEEE80211_CCK_RATE_1MB_MASK (1<<0) | |
347 | #define IEEE80211_CCK_RATE_2MB_MASK (1<<1) | |
348 | #define IEEE80211_CCK_RATE_5MB_MASK (1<<2) | |
349 | #define IEEE80211_CCK_RATE_11MB_MASK (1<<3) | |
350 | #define IEEE80211_OFDM_RATE_6MB_MASK (1<<4) | |
351 | #define IEEE80211_OFDM_RATE_9MB_MASK (1<<5) | |
352 | #define IEEE80211_OFDM_RATE_12MB_MASK (1<<6) | |
353 | #define IEEE80211_OFDM_RATE_18MB_MASK (1<<7) | |
354 | #define IEEE80211_OFDM_RATE_24MB_MASK (1<<8) | |
355 | #define IEEE80211_OFDM_RATE_36MB_MASK (1<<9) | |
356 | #define IEEE80211_OFDM_RATE_48MB_MASK (1<<10) | |
357 | #define IEEE80211_OFDM_RATE_54MB_MASK (1<<11) | |
358 | ||
359 | #define IEEE80211_CCK_RATES_MASK 0x0000000F | |
360 | #define IEEE80211_CCK_BASIC_RATES_MASK (IEEE80211_CCK_RATE_1MB_MASK | \ | |
361 | IEEE80211_CCK_RATE_2MB_MASK) | |
362 | #define IEEE80211_CCK_DEFAULT_RATES_MASK (IEEE80211_CCK_BASIC_RATES_MASK | \ | |
363 | IEEE80211_CCK_RATE_5MB_MASK | \ | |
364 | IEEE80211_CCK_RATE_11MB_MASK) | |
365 | ||
366 | #define IEEE80211_OFDM_RATES_MASK 0x00000FF0 | |
367 | #define IEEE80211_OFDM_BASIC_RATES_MASK (IEEE80211_OFDM_RATE_6MB_MASK | \ | |
368 | IEEE80211_OFDM_RATE_12MB_MASK | \ | |
369 | IEEE80211_OFDM_RATE_24MB_MASK) | |
370 | #define IEEE80211_OFDM_DEFAULT_RATES_MASK (IEEE80211_OFDM_BASIC_RATES_MASK | \ | |
371 | IEEE80211_OFDM_RATE_9MB_MASK | \ | |
372 | IEEE80211_OFDM_RATE_18MB_MASK | \ | |
373 | IEEE80211_OFDM_RATE_36MB_MASK | \ | |
374 | IEEE80211_OFDM_RATE_48MB_MASK | \ | |
375 | IEEE80211_OFDM_RATE_54MB_MASK) | |
376 | #define IEEE80211_DEFAULT_RATES_MASK (IEEE80211_OFDM_DEFAULT_RATES_MASK | \ | |
377 | IEEE80211_CCK_DEFAULT_RATES_MASK) | |
378 | ||
379 | #define IEEE80211_NUM_OFDM_RATES 8 | |
380 | #define IEEE80211_NUM_CCK_RATES 4 | |
381 | #define IEEE80211_OFDM_SHIFT_MASK_A 4 | |
382 | ||
383 | ||
384 | ||
385 | ||
386 | /* NOTE: This data is for statistical purposes; not all hardware provides this | |
387 | * information for frames received. Not setting these will not cause | |
388 | * any adverse affects. */ | |
389 | struct ieee80211_rx_stats { | |
390 | u32 mac_time; | |
391 | s8 rssi; | |
392 | u8 signal; | |
393 | u8 noise; | |
394 | u16 rate; /* in 100 kbps */ | |
395 | u8 received_channel; | |
396 | u8 control; | |
397 | u8 mask; | |
398 | u8 freq; | |
399 | u16 len; | |
400 | }; | |
401 | ||
402 | /* IEEE 802.11 requires that STA supports concurrent reception of at least | |
403 | * three fragmented frames. This define can be increased to support more | |
404 | * concurrent frames, but it should be noted that each entry can consume about | |
405 | * 2 kB of RAM and increasing cache size will slow down frame reassembly. */ | |
406 | #define IEEE80211_FRAG_CACHE_LEN 4 | |
407 | ||
408 | struct ieee80211_frag_entry { | |
409 | unsigned long first_frag_time; | |
410 | unsigned int seq; | |
411 | unsigned int last_frag; | |
412 | struct sk_buff *skb; | |
413 | u8 src_addr[ETH_ALEN]; | |
414 | u8 dst_addr[ETH_ALEN]; | |
415 | }; | |
416 | ||
417 | struct ieee80211_stats { | |
418 | unsigned int tx_unicast_frames; | |
419 | unsigned int tx_multicast_frames; | |
420 | unsigned int tx_fragments; | |
421 | unsigned int tx_unicast_octets; | |
422 | unsigned int tx_multicast_octets; | |
423 | unsigned int tx_deferred_transmissions; | |
424 | unsigned int tx_single_retry_frames; | |
425 | unsigned int tx_multiple_retry_frames; | |
426 | unsigned int tx_retry_limit_exceeded; | |
427 | unsigned int tx_discards; | |
428 | unsigned int rx_unicast_frames; | |
429 | unsigned int rx_multicast_frames; | |
430 | unsigned int rx_fragments; | |
431 | unsigned int rx_unicast_octets; | |
432 | unsigned int rx_multicast_octets; | |
433 | unsigned int rx_fcs_errors; | |
434 | unsigned int rx_discards_no_buffer; | |
435 | unsigned int tx_discards_wrong_sa; | |
436 | unsigned int rx_discards_undecryptable; | |
437 | unsigned int rx_message_in_msg_fragments; | |
438 | unsigned int rx_message_in_bad_msg_fragments; | |
439 | }; | |
440 | ||
441 | struct ieee80211_device; | |
442 | ||
443 | #include "ieee80211_crypt.h" | |
444 | ||
445 | #define SEC_KEY_1 (1<<0) | |
446 | #define SEC_KEY_2 (1<<1) | |
447 | #define SEC_KEY_3 (1<<2) | |
448 | #define SEC_KEY_4 (1<<3) | |
449 | #define SEC_ACTIVE_KEY (1<<4) | |
450 | #define SEC_AUTH_MODE (1<<5) | |
451 | #define SEC_UNICAST_GROUP (1<<6) | |
452 | #define SEC_LEVEL (1<<7) | |
453 | #define SEC_ENABLED (1<<8) | |
454 | ||
455 | #define SEC_LEVEL_0 0 /* None */ | |
456 | #define SEC_LEVEL_1 1 /* WEP 40 and 104 bit */ | |
457 | #define SEC_LEVEL_2 2 /* Level 1 + TKIP */ | |
458 | #define SEC_LEVEL_2_CKIP 3 /* Level 1 + CKIP */ | |
459 | #define SEC_LEVEL_3 4 /* Level 2 + CCMP */ | |
460 | ||
461 | #define WEP_KEYS 4 | |
462 | #define WEP_KEY_LEN 13 | |
463 | ||
464 | struct ieee80211_security { | |
465 | u16 active_key:2, | |
466 | enabled:1, | |
467 | auth_mode:2, | |
468 | auth_algo:4, | |
469 | unicast_uses_group:1; | |
470 | u8 key_sizes[WEP_KEYS]; | |
471 | u8 keys[WEP_KEYS][WEP_KEY_LEN]; | |
472 | u8 level; | |
473 | u16 flags; | |
474 | } __attribute__ ((packed)); | |
475 | ||
476 | ||
477 | /* | |
478 | ||
479 | 802.11 data frame from AP | |
480 | ||
481 | ,-------------------------------------------------------------------. | |
482 | Bytes | 2 | 2 | 6 | 6 | 6 | 2 | 0..2312 | 4 | | |
483 | |------|------|---------|---------|---------|------|---------|------| | |
484 | Desc. | ctrl | dura | DA/RA | TA | SA | Sequ | frame | fcs | | |
485 | | | tion | (BSSID) | | | ence | data | | | |
486 | `-------------------------------------------------------------------' | |
487 | ||
488 | Total: 28-2340 bytes | |
489 | ||
490 | */ | |
491 | ||
492 | struct ieee80211_header_data { | |
493 | u16 frame_ctl; | |
494 | u16 duration_id; | |
495 | u8 addr1[6]; | |
496 | u8 addr2[6]; | |
497 | u8 addr3[6]; | |
498 | u16 seq_ctrl; | |
499 | }; | |
500 | ||
501 | #define BEACON_PROBE_SSID_ID_POSITION 12 | |
502 | ||
503 | /* Management Frame Information Element Types */ | |
504 | #define MFIE_TYPE_SSID 0 | |
505 | #define MFIE_TYPE_RATES 1 | |
506 | #define MFIE_TYPE_FH_SET 2 | |
507 | #define MFIE_TYPE_DS_SET 3 | |
508 | #define MFIE_TYPE_CF_SET 4 | |
509 | #define MFIE_TYPE_TIM 5 | |
510 | #define MFIE_TYPE_IBSS_SET 6 | |
511 | #define MFIE_TYPE_CHALLENGE 16 | |
512 | #define MFIE_TYPE_RSN 48 | |
513 | #define MFIE_TYPE_RATES_EX 50 | |
514 | #define MFIE_TYPE_GENERIC 221 | |
515 | ||
516 | struct ieee80211_info_element_hdr { | |
517 | u8 id; | |
518 | u8 len; | |
519 | } __attribute__ ((packed)); | |
520 | ||
521 | struct ieee80211_info_element { | |
522 | u8 id; | |
523 | u8 len; | |
524 | u8 data[0]; | |
525 | } __attribute__ ((packed)); | |
526 | ||
527 | /* | |
528 | * These are the data types that can make up management packets | |
529 | * | |
530 | u16 auth_algorithm; | |
531 | u16 auth_sequence; | |
532 | u16 beacon_interval; | |
533 | u16 capability; | |
534 | u8 current_ap[ETH_ALEN]; | |
535 | u16 listen_interval; | |
536 | struct { | |
537 | u16 association_id:14, reserved:2; | |
538 | } __attribute__ ((packed)); | |
539 | u32 time_stamp[2]; | |
540 | u16 reason; | |
541 | u16 status; | |
542 | */ | |
543 | ||
544 | struct ieee80211_authentication { | |
545 | struct ieee80211_header_data header; | |
546 | u16 algorithm; | |
547 | u16 transaction; | |
548 | u16 status; | |
549 | struct ieee80211_info_element info_element; | |
550 | } __attribute__ ((packed)); | |
551 | ||
552 | ||
553 | struct ieee80211_probe_response { | |
554 | struct ieee80211_header_data header; | |
555 | u32 time_stamp[2]; | |
556 | u16 beacon_interval; | |
557 | u16 capability; | |
558 | struct ieee80211_info_element info_element; | |
559 | } __attribute__ ((packed)); | |
560 | ||
561 | struct ieee80211_assoc_request_frame { | |
562 | u16 capability; | |
563 | u16 listen_interval; | |
564 | u8 current_ap[ETH_ALEN]; | |
565 | struct ieee80211_info_element info_element; | |
566 | } __attribute__ ((packed)); | |
567 | ||
568 | struct ieee80211_assoc_response_frame { | |
569 | struct ieee80211_hdr_3addr header; | |
570 | u16 capability; | |
571 | u16 status; | |
572 | u16 aid; | |
573 | struct ieee80211_info_element info_element; /* supported rates */ | |
574 | } __attribute__ ((packed)); | |
575 | ||
576 | ||
577 | struct ieee80211_txb { | |
578 | u8 nr_frags; | |
579 | u8 encrypted; | |
580 | u16 reserved; | |
581 | u16 frag_size; | |
582 | u16 payload_size; | |
583 | struct sk_buff *fragments[0]; | |
584 | }; | |
585 | ||
586 | ||
587 | /* SWEEP TABLE ENTRIES NUMBER*/ | |
588 | #define MAX_SWEEP_TAB_ENTRIES 42 | |
589 | #define MAX_SWEEP_TAB_ENTRIES_PER_PACKET 7 | |
590 | /* MAX_RATES_LENGTH needs to be 12. The spec says 8, and many APs | |
591 | * only use 8, and then use extended rates for the remaining supported | |
592 | * rates. Other APs, however, stick all of their supported rates on the | |
593 | * main rates information element... */ | |
594 | #define MAX_RATES_LENGTH ((u8)12) | |
595 | #define MAX_RATES_EX_LENGTH ((u8)16) | |
596 | #define MAX_NETWORK_COUNT 128 | |
597 | ||
598 | #define CRC_LENGTH 4U | |
599 | ||
600 | #define MAX_WPA_IE_LEN 64 | |
601 | ||
602 | #define NETWORK_EMPTY_ESSID (1<<0) | |
603 | #define NETWORK_HAS_OFDM (1<<1) | |
604 | #define NETWORK_HAS_CCK (1<<2) | |
605 | ||
606 | struct ieee80211_network { | |
607 | /* These entries are used to identify a unique network */ | |
608 | u8 bssid[ETH_ALEN]; | |
609 | u8 channel; | |
610 | /* Ensure null-terminated for any debug msgs */ | |
611 | u8 ssid[IW_ESSID_MAX_SIZE + 1]; | |
612 | u8 ssid_len; | |
613 | ||
614 | /* These are network statistics */ | |
615 | struct ieee80211_rx_stats stats; | |
616 | u16 capability; | |
617 | u8 rates[MAX_RATES_LENGTH]; | |
618 | u8 rates_len; | |
619 | u8 rates_ex[MAX_RATES_EX_LENGTH]; | |
620 | u8 rates_ex_len; | |
621 | unsigned long last_scanned; | |
622 | u8 mode; | |
623 | u8 flags; | |
624 | u32 last_associate; | |
625 | u32 time_stamp[2]; | |
626 | u16 beacon_interval; | |
627 | u16 listen_interval; | |
628 | u16 atim_window; | |
629 | u8 wpa_ie[MAX_WPA_IE_LEN]; | |
630 | size_t wpa_ie_len; | |
631 | u8 rsn_ie[MAX_WPA_IE_LEN]; | |
632 | size_t rsn_ie_len; | |
633 | struct list_head list; | |
634 | }; | |
635 | ||
636 | enum ieee80211_state { | |
637 | IEEE80211_UNINITIALIZED = 0, | |
638 | IEEE80211_INITIALIZED, | |
639 | IEEE80211_ASSOCIATING, | |
640 | IEEE80211_ASSOCIATED, | |
641 | IEEE80211_AUTHENTICATING, | |
642 | IEEE80211_AUTHENTICATED, | |
643 | IEEE80211_SHUTDOWN | |
644 | }; | |
645 | ||
646 | #define DEFAULT_MAX_SCAN_AGE (15 * HZ) | |
647 | #define DEFAULT_FTS 2346 | |
648 | #define MAC_FMT "%02x:%02x:%02x:%02x:%02x:%02x" | |
649 | #define MAC_ARG(x) ((u8*)(x))[0],((u8*)(x))[1],((u8*)(x))[2],((u8*)(x))[3],((u8*)(x))[4],((u8*)(x))[5] | |
650 | ||
651 | ||
652 | extern inline int is_multicast_ether_addr(const u8 *addr) | |
653 | { | |
654 | return ((addr[0] != 0xff) && (0x01 & addr[0])); | |
655 | } | |
656 | ||
657 | extern inline int is_broadcast_ether_addr(const u8 *addr) | |
658 | { | |
659 | return ((addr[0] == 0xff) && (addr[1] == 0xff) && (addr[2] == 0xff) && \ | |
660 | (addr[3] == 0xff) && (addr[4] == 0xff) && (addr[5] == 0xff)); | |
661 | } | |
662 | ||
663 | #define CFG_IEEE80211_RESERVE_FCS (1<<0) | |
664 | #define CFG_IEEE80211_COMPUTE_FCS (1<<1) | |
665 | ||
666 | struct ieee80211_device { | |
667 | struct net_device *dev; | |
668 | ||
669 | /* Bookkeeping structures */ | |
670 | struct net_device_stats stats; | |
671 | struct ieee80211_stats ieee_stats; | |
672 | ||
673 | /* Probe / Beacon management */ | |
674 | struct list_head network_free_list; | |
675 | struct list_head network_list; | |
676 | struct ieee80211_network *networks; | |
677 | int scans; | |
678 | int scan_age; | |
679 | ||
680 | int iw_mode; /* operating mode (IW_MODE_*) */ | |
681 | ||
682 | spinlock_t lock; | |
683 | ||
684 | int tx_headroom; /* Set to size of any additional room needed at front | |
685 | * of allocated Tx SKBs */ | |
686 | u32 config; | |
687 | ||
688 | /* WEP and other encryption related settings at the device level */ | |
689 | int open_wep; /* Set to 1 to allow unencrypted frames */ | |
690 | ||
691 | int reset_on_keychange; /* Set to 1 if the HW needs to be reset on | |
692 | * WEP key changes */ | |
693 | ||
694 | /* If the host performs {en,de}cryption, then set to 1 */ | |
695 | int host_encrypt; | |
696 | int host_decrypt; | |
697 | int ieee802_1x; /* is IEEE 802.1X used */ | |
698 | ||
699 | /* WPA data */ | |
700 | int wpa_enabled; | |
701 | int drop_unencrypted; | |
702 | int tkip_countermeasures; | |
703 | int privacy_invoked; | |
704 | size_t wpa_ie_len; | |
705 | u8 *wpa_ie; | |
706 | ||
707 | struct list_head crypt_deinit_list; | |
708 | struct ieee80211_crypt_data *crypt[WEP_KEYS]; | |
709 | int tx_keyidx; /* default TX key index (crypt[tx_keyidx]) */ | |
710 | struct timer_list crypt_deinit_timer; | |
711 | ||
712 | int bcrx_sta_key; /* use individual keys to override default keys even | |
713 | * with RX of broad/multicast frames */ | |
714 | ||
715 | /* Fragmentation structures */ | |
716 | struct ieee80211_frag_entry frag_cache[IEEE80211_FRAG_CACHE_LEN]; | |
717 | unsigned int frag_next_idx; | |
718 | u16 fts; /* Fragmentation Threshold */ | |
719 | ||
720 | /* Association info */ | |
721 | u8 bssid[ETH_ALEN]; | |
722 | ||
723 | enum ieee80211_state state; | |
724 | ||
725 | int mode; /* A, B, G */ | |
726 | int modulation; /* CCK, OFDM */ | |
727 | int freq_band; /* 2.4Ghz, 5.2Ghz, Mixed */ | |
728 | int abg_ture; /* ABG flag */ | |
729 | ||
730 | /* Callback functions */ | |
731 | void (*set_security)(struct net_device *dev, | |
732 | struct ieee80211_security *sec); | |
733 | int (*hard_start_xmit)(struct ieee80211_txb *txb, | |
734 | struct net_device *dev); | |
735 | int (*reset_port)(struct net_device *dev); | |
736 | ||
737 | /* This must be the last item so that it points to the data | |
738 | * allocated beyond this structure by alloc_ieee80211 */ | |
739 | u8 priv[0]; | |
740 | }; | |
741 | ||
742 | #define IEEE_A (1<<0) | |
743 | #define IEEE_B (1<<1) | |
744 | #define IEEE_G (1<<2) | |
745 | #define IEEE_MODE_MASK (IEEE_A|IEEE_B|IEEE_G) | |
746 | ||
747 | extern inline void *ieee80211_priv(struct net_device *dev) | |
748 | { | |
749 | return ((struct ieee80211_device *)netdev_priv(dev))->priv; | |
750 | } | |
751 | ||
752 | extern inline int ieee80211_is_empty_essid(const char *essid, int essid_len) | |
753 | { | |
754 | /* Single white space is for Linksys APs */ | |
755 | if (essid_len == 1 && essid[0] == ' ') | |
756 | return 1; | |
757 | ||
758 | /* Otherwise, if the entire essid is 0, we assume it is hidden */ | |
759 | while (essid_len) { | |
760 | essid_len--; | |
761 | if (essid[essid_len] != '\0') | |
762 | return 0; | |
763 | } | |
764 | ||
765 | return 1; | |
766 | } | |
767 | ||
768 | extern inline int ieee80211_is_valid_mode(struct ieee80211_device *ieee, int mode) | |
769 | { | |
770 | /* | |
771 | * It is possible for both access points and our device to support | |
772 | * combinations of modes, so as long as there is one valid combination | |
773 | * of ap/device supported modes, then return success | |
774 | * | |
775 | */ | |
776 | if ((mode & IEEE_A) && | |
777 | (ieee->modulation & IEEE80211_OFDM_MODULATION) && | |
778 | (ieee->freq_band & IEEE80211_52GHZ_BAND)) | |
779 | return 1; | |
780 | ||
781 | if ((mode & IEEE_G) && | |
782 | (ieee->modulation & IEEE80211_OFDM_MODULATION) && | |
783 | (ieee->freq_band & IEEE80211_24GHZ_BAND)) | |
784 | return 1; | |
785 | ||
786 | if ((mode & IEEE_B) && | |
787 | (ieee->modulation & IEEE80211_CCK_MODULATION) && | |
788 | (ieee->freq_band & IEEE80211_24GHZ_BAND)) | |
789 | return 1; | |
790 | ||
791 | return 0; | |
792 | } | |
793 | ||
794 | extern inline int ieee80211_get_hdrlen(u16 fc) | |
795 | { | |
796 | int hdrlen = 24; | |
797 | ||
798 | switch (WLAN_FC_GET_TYPE(fc)) { | |
799 | case IEEE80211_FTYPE_DATA: | |
800 | if ((fc & IEEE80211_FCTL_FROMDS) && (fc & IEEE80211_FCTL_TODS)) | |
801 | hdrlen = 30; /* Addr4 */ | |
802 | break; | |
803 | case IEEE80211_FTYPE_CTL: | |
804 | switch (WLAN_FC_GET_STYPE(fc)) { | |
805 | case IEEE80211_STYPE_CTS: | |
806 | case IEEE80211_STYPE_ACK: | |
807 | hdrlen = 10; | |
808 | break; | |
809 | default: | |
810 | hdrlen = 16; | |
811 | break; | |
812 | } | |
813 | break; | |
814 | } | |
815 | ||
816 | return hdrlen; | |
817 | } | |
818 | ||
819 | ||
820 | ||
821 | /* ieee80211.c */ | |
822 | extern void free_ieee80211(struct net_device *dev); | |
823 | extern struct net_device *alloc_ieee80211(int sizeof_priv); | |
824 | ||
825 | extern int ieee80211_set_encryption(struct ieee80211_device *ieee); | |
826 | ||
827 | /* ieee80211_tx.c */ | |
828 | ||
829 | ||
830 | extern int ieee80211_xmit(struct sk_buff *skb, | |
831 | struct net_device *dev); | |
832 | extern void ieee80211_txb_free(struct ieee80211_txb *); | |
833 | ||
834 | ||
835 | /* ieee80211_rx.c */ | |
836 | extern int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb, | |
837 | struct ieee80211_rx_stats *rx_stats); | |
838 | extern void ieee80211_rx_mgt(struct ieee80211_device *ieee, | |
839 | struct ieee80211_hdr *header, | |
840 | struct ieee80211_rx_stats *stats); | |
841 | ||
842 | /* iee80211_wx.c */ | |
843 | extern int ieee80211_wx_get_scan(struct ieee80211_device *ieee, | |
844 | struct iw_request_info *info, | |
845 | union iwreq_data *wrqu, char *key); | |
846 | extern int ieee80211_wx_set_encode(struct ieee80211_device *ieee, | |
847 | struct iw_request_info *info, | |
848 | union iwreq_data *wrqu, char *key); | |
849 | extern int ieee80211_wx_get_encode(struct ieee80211_device *ieee, | |
850 | struct iw_request_info *info, | |
851 | union iwreq_data *wrqu, char *key); | |
852 | ||
853 | ||
854 | extern inline void ieee80211_increment_scans(struct ieee80211_device *ieee) | |
855 | { | |
856 | ieee->scans++; | |
857 | } | |
858 | ||
859 | extern inline int ieee80211_get_scans(struct ieee80211_device *ieee) | |
860 | { | |
861 | return ieee->scans; | |
862 | } | |
863 | ||
864 | static inline const char *escape_essid(const char *essid, u8 essid_len) { | |
865 | static char escaped[IW_ESSID_MAX_SIZE * 2 + 1]; | |
866 | const char *s = essid; | |
867 | char *d = escaped; | |
868 | ||
869 | if (ieee80211_is_empty_essid(essid, essid_len)) { | |
870 | memcpy(escaped, "<hidden>", sizeof("<hidden>")); | |
871 | return escaped; | |
872 | } | |
873 | ||
874 | essid_len = min(essid_len, (u8)IW_ESSID_MAX_SIZE); | |
875 | while (essid_len--) { | |
876 | if (*s == '\0') { | |
877 | *d++ = '\\'; | |
878 | *d++ = '0'; | |
879 | s++; | |
880 | } else { | |
881 | *d++ = *s++; | |
882 | } | |
883 | } | |
884 | *d = '\0'; | |
885 | return escaped; | |
886 | } | |
887 | #endif /* IEEE80211_H */ |