[deliverable/binutils-gdb.git] / include / opcode / ChangeLog

start-sanitize-sky
Wed Dec  9 15:44:14 1998  Doug Evans  <devans@canuck.cygnus.com>

	Thu Nov 19 16:39:45 EST 1998 Frank Ch. Eigler <fche@cygnus.com>

	* mips.h (INSN_SYNC): New flag.

end-sanitize-sky
Wed Dec  9 10:38:48 1998  David Taylor  <taylor@texas.cygnus.com>

	The following is part of a change made by Edith Epstein
 	<eepstein@sophia.cygnus.com> as part of a project to merge in
 	changes by HP; HP did not create ChangeLog entries.

	* hppa.h (completer_chars): list of chars to not put a space
 	after.

Sun Dec  6 13:21:34 1998  Ian Lance Taylor  <ian@cygnus.com>

	* i386.h (i386_optab): Permit w suffix on processor control and
 	status word instructions.

1998-11-30  Doug Evans  <devans@casey.cygnus.com>

	* cgen.h (struct cgen_hw_entry): Delete const on attrs member.
	(struct cgen_keyword_entry): Ditto.
	(struct cgen_operand): Ditto.
	(CGEN_IFLD): New typedef, with associated access macros.
	(CGEN_IFMT): New typedef, with associated access macros.
	(CGEN_IFMT): Renamed from CGEN_FORMAT.  New member `iflds'.
	(CGEN_IVALUE): New typedef.
	(struct cgen_insn): Delete const on syntax,attrs members.
	`format' now points to format data.  Type of `value' is now
	CGEN_IVALUE.
	(struct cgen_opcode_table): New member ifld_table.

1998-11-18  Doug Evans  <devans@casey.cygnus.com>

	* cgen.h (cgen_extract_fn): Update type of `base_insn' arg.
	(CGEN_OPERAND_INSTANCE): New member `attrs'.
	(CGEN_OPERAND_INSTANCE_{ATTRS,ATTR}): New macros.
	(cgen_dis_lookup_insn): Update type of `base_insn' arg.
	(cgen_opcode_table): Update type of dis_hash fn.
	(extract_operand): Update type of `insn_value' arg.

Thu Oct 29 11:38:36 1998  Doug Evans  <devans@canuck.cygnus.com>

	* cgen.h (CGEN_VERSION_{MAJOR,MINOR,FIXLEVEL}): Delete.

Tue Oct 27 08:57:59 1998  Gavin Romig-Koch  <gavin@cygnus.com>

	* mips.h (INSN_MULT): Added.

Tue Oct 20 11:31:34 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>

	* i386.h (MAX_MNEM_SIZE): Rename from MAX_OPCODE_SIZE.

Mon Oct 19 12:50:00 1998  Doug Evans  <devans@seba.cygnus.com>

	* cgen.h (CGEN_INSN_INT): New typedef.
	(CGEN_INT_INSN_P): Renamed from CGEN_INT_INSN.
	(CGEN_INSN_BYTES): Renamed from cgen_insn_t.
	(CGEN_INSN_BYTES_PTR): New typedef.
	(CGEN_EXTRACT_INFO): New typedef.
	(cgen_insert_fn,cgen_extract_fn): Update.
	(cgen_opcode_table): New member `insn_endian'.
	(assemble_insn,lookup_insn,lookup_get_insn_operands): Update.
	(insert_operand,extract_operand): Update.
	(cgen_get_insn_value,cgen_put_insn_value): Add prototypes.

Fri Oct  9 13:38:13 1998  Doug Evans  <devans@seba.cygnus.com>

	* cgen.h (CGEN_ATTR_BOOLS): New macro.
	(struct CGEN_HW_ENTRY): New member `attrs'.
	(CGEN_HW_ATTR): New macro.
	(struct CGEN_OPERAND_INSTANCE): New member `name'.
	(CGEN_INSN_INVALID_P): New macro.

Mon Oct  5 00:21:07 1998  Jeffrey A Law  (law@cygnus.com)

	* hppa.h: Add "fid".
start-sanitize-cygnus
	Add PA2.0 floating point instructions, including hacked load/store
	with 14bit offset support.
end-sanitize-cygnus
	
Sun Oct  4 21:00:00 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>

	From Robert Andrew Dale <rob@nb.net>
	* i386.h (i386_optab): Add AMD 3DNow! instructions.
	(AMD_3DNOW_OPCODE): Define.

Tue Sep 22 17:53:47 1998  Nick Clifton  <nickc@cygnus.com>

	* d30v.h (EITHER_BUT_PREFER_MU): Define.

Mon Aug 10 14:09:38 1998  Doug Evans  <devans@canuck.cygnus.com>

	* cgen.h (cgen_insn): #if 0 out element `cdx'.

Mon Aug  3 12:21:57 1998  Doug Evans  <devans@seba.cygnus.com>

	Move all global state data into opcode table struct, and treat
	opcode table as something that is "opened/closed".
	* cgen.h (CGEN_OPCODE_DESC): New type.
	(all fns): New first arg of opcode table descriptor.
	(cgen_set_parse_operand_fn): Add prototype.
	(cgen_current_machine,cgen_current_endian): Delete.
	(CGEN_OPCODE_TABLE): New members mach,endian,operand_table,
	parse_operand_fn,asm_hash_table,asm_hash_table_entries,
	dis_hash_table,dis_hash_table_entries.
	(opcode_open,opcode_close): Add prototypes.

	* cgen.h (cgen_insn): New element `cdx'.

Thu Jul 30 21:44:25 1998  Frank Ch. Eigler  <fche@cygnus.com>

	* d30v.h (FLAG_LKR): New flag for "left-kills-right" instructions.

Tue Jul 28 10:59:07 1998  Jeffrey A Law  (law@cygnus.com)

	* mn10300.h: Add "no_match_operands" field for instructions.
	(MN10300_MAX_OPERANDS): Define.

Fri Jul 24 11:44:24 1998  Doug Evans  <devans@canuck.cygnus.com>

	* cgen.h (cgen_macro_insn_count): Declare.

Tue Jul 21 13:12:13 1998  Doug Evans  <devans@seba.cygnus.com>

	* cgen.h (CGEN_VERSION_{MAJOR,MINOR,FIXLEVEL}): Define.
	(cgen_insert_fn,cgen_extract_fn): New arg `pc'.
	(get_operand,put_operand): Replaced with get_{int,vma}_operand,
	set_{int,vma}_operand.

Fri Jun 26 11:09:06 1998  Jeffrey A Law  (law@cygnus.com)

	* mn10300.h: Add "machine" field for instructions.
	(MN103, AM30): Define machine types.
start-sanitize-am33
	(AM33): Define machine type.
end-sanitize-am33
	
start-sanitize-sky
Mon Jun 22 16:03:28 1998  Ian Carmichael  <iancarm@cygnus.com>

	* dvp.h (DVP_OPERAND_RELOC_11_S4, DVP_OPERAND_RELOC_U15_S3): Added.

end-sanitize-sky
start-sanitize-am33
Mon Jun 22 13:28:59 1998  Jeffrey A Law  (law@cygnus.com)

	* mn10300.h (FMT_D10): Define.

Fri Jun 19 16:44:44 1998  Jeffrey A Law  (law@cygnus.com)

	* mn10300.h (MN10300_OPERAND_24BIT): Define.
	(FMT_D8, FMT_D9): Likewise.

end-sanitize-am33
Fri Jun 19 16:09:09 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>

	* i386.h: Use FP, not sl_Suf, for fxsave and fxrstor.

start-sanitize-am33
Fri Jun 19 09:39:47 1998  Jeffrey A Law  (law@cygnus.com)

	* mn10300.h (MN10300_OPERAND_XRREG): Define.
	(MN10300_OPERAND_PLUS): Likewise.
	(FMT_D6, FMT_D7): Likewise.

end-sanitize-am33
1998-06-18  Ulrich Drepper  <drepper@cygnus.com>

	* i386.h: Add support for fxsave, fxrstor, sysenter and sysexit.

start-sanitize-am33
Wed Jun 17 17:54:08 1998  Jeffrey A Law  (law@cygnus.com)

	* mn10300.h (MN10300_OPERAND_USP): Define.
	(MN10300_OPERAND_SSP, MN10300_OPERAND_MSP): Likewise.
	(MN10300_OPERAND_PC, MN10300_OPERAND_EPSW): Likewise.
	(MN10300_OPERAND_RREG): Likewise.

end-sanitize-am33
Sat Jun 13 11:31:35 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>

	* i386.h (i386_optab): Add general form of aad and aam.  Add ud2a
	and ud2b.
	(i386_regtab): Allow cr0..7, db0..7, dr0..7, tr0..7, not just
	those that happen to be implemented on pentiums.

Tue Jun  9 12:16:01 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>

	* i386.h: Change occurences of Data16 to Size16, Data32 to Size32,
	IgnoreDataSize to IgnoreSize.  Flag address and data size prefixes
	with Size16|IgnoreSize or Size32|IgnoreSize.

Mon Jun  8 12:15:52 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>

	* i386.h (REPNE): Rename to REPNE_PREFIX_OPCODE.
	(REPE): Rename to REPE_PREFIX_OPCODE.
	(i386_regtab_end): Remove.
	(i386_prefixtab, i386_prefixtab_end): Remove.
	(i386_optab): Use NULL as sentinel rather than "" to suit rewrite
	of md_begin.
	(MAX_OPCODE_SIZE): Define.
	(i386_optab_end): Remove.
	(sl_Suf): Define.
	(sl_FP): Use sl_Suf.

	* i386.h (i386_optab): Allow 16 bit displacement for `mov
	mem,acc'.  Combine 16 and 32 bit forms of various insns.  Allow 16
	bit form of ljmp.  Add IsPrefix modifier to prefixes.  Add addr32,
	data32, dword, and adword prefixes.
	(i386_regtab): Add BaseIndex modifier to valid 16 bit base/index
	regs.

Fri Jun  5 23:42:43 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>

	* i386.h (i386_regtab): Remove BaseIndex modifier from esp.

	* i386.h: Allow `l' suffix on fld, fst, fstp, fcom, fcomp with
	register operands, because this is a common idiom.  Flag them with
	a warning.  Allow illegal faddp, fsubp, fsubrp, fmulp, fdivp,
	fdivrp because gcc erroneously generates them.  Also flag with a
	warning.

	* i386.h: Add suffix modifiers to most insns, and tighter operand
	checks in some cases.  Fix a number of UnixWare compatibility
	issues with float insns.  Merge some floating point opcodes, using
	new FloatMF modifier.
	(WORD_PREFIX_OPCODE): Rename to DATA_PREFIX_OPCODE for
	consistency.

	* i386.h: Change occurence of ShortformW to W|ShortForm.  Add
	IgnoreDataSize where appropriate.

Wed Jun  3 18:28:45 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>

	* i386.h: (one_byte_segment_defaults): Remove.
	(two_byte_segment_defaults): Remove.
	(i386_regtab): Add BaseIndex to 32 bit regs reg_type.

Fri May 15 15:59:04 1998  Doug Evans  <devans@seba.cygnus.com>

	* cgen.h (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
	(cgen_hw_lookup_by_num): Declare.

Thu May  7 09:27:58 1998  Frank Ch. Eigler  <fche@cygnus.com>

	* mips.h (OP_{SH,MASK}_CODE2): Added "q" operand format for lower
	ten bits of MIPS ISA1 "break" instruction, and for "sdbbp"

Thu May  7 02:14:08 1998  Doug Evans  <devans@charmed.cygnus.com>

	* cgen.h (cgen_asm_init_parse): Delete.
	(cgen_save_fixups,cgen_restore_fixups,cgen_swap_fixups): Delete.
	(cgen_asm_record_register,cgen_asm_finish_insn): Delete.

Mon Apr 27 10:13:11 1998  Doug Evans  <devans@seba.cygnus.com>

	* cgen.h (CGEN_ATTR_TYPE): Delete `const', moved to uses.
	(cgen_asm_finish_insn): Update prototype.
	(cgen_insn): New members num, data.
	(CGEN_INSN_TABLE): Members asm_hash, asm_hash_table_size,
	dis_hash, dis_hash_table_size moved to ...
	(CGEN_OPCODE_TABLE).  Here.  Renamed from CGEN_OPCODE_DATA.
	All uses updated.  New members asm_hash_p, dis_hash_p.
	(CGEN_MINSN_EXPANSION): New struct.
	(cgen_expand_macro_insn): Declare.
	(cgen_macro_insn_count): Declare.
	(get_insn_operands): Update prototype.
	(lookup_get_insn_operands): Declare.

Tue Apr 21 17:11:32 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>

	* i386.h (i386_optab): Change iclrKludge and imulKludge to
	regKludge.  Add operands types for string instructions.

Mon Apr 20 14:40:29 1998  Tom Tromey  <tromey@cygnus.com>

	* i386.h (X): Renamed from `Z_' to preserve formatting of opcode
	table.

Sun Apr 19 13:54:06 1998  Tom Tromey  <tromey@cygnus.com>

	* i386.h (Z_): Renamed from `_' to avoid clash with common alias
	for `gettext'.

start-sanitize-sky
Mon Apr  6 17:33:31 1998  Doug Evans  <devans@canuck.cygnus.com>

	* dvp.h (dvp_expand_macro): Declare.
	(vif_macros,vif_macro_count): Declare.

end-sanitize-sky
Fri Apr  3 12:04:48 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>

	* i386.h: Remove NoModrm flag from all insns: it's never checked.
	Add IsString flag to string instructions.
	(IS_STRING): Don't define.
	(LOCK_PREFIX_OPCODE, CS_PREFIX_OPCODE, DS_PREFIX_OPCODE): Define.
	(ES_PREFIX_OPCODE, FS_PREFIX_OPCODE, GS_PREFIX_OPCODE): Define.
	(SS_PREFIX_OPCODE): Define.

Mon Mar 30 21:31:56 1998  Ian Lance Taylor  <ian@cygnus.com>

	* i386.h: Revert March 24 patch; no more LinearAddress.

Mon Mar 30 10:25:54 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>

	* i386.h (i386_optab): Remove fwait (9b) from all floating point
	instructions, and instead add FWait opcode modifier.  Add short
	form of fldenv and fstenv.
	(FWAIT_OPCODE): Define.

	* i386.h (i386_optab): Change second operand constraint of `mov
	sreg,reg|mem' instruction from Reg16|Mem to WordReg|WordMem to
	allow legal instructions such as `movl %gs,%esi'

Fri Mar 27 18:30:52 1998  Ian Lance Taylor  <ian@cygnus.com>

	* h8300.h: Various changes to fully bracket initializers.

start-sanitize-sky
Wed Mar 25 13:18:36 1998  Doug Evans  <devans@canuck.cygnus.com>

	* dvp.h (DVP_OPERAND_UNPACK_ADDRESS): New macro.
	(vif_unpack_len_value): Update prototype.
	(vif_get_var_data,vif_get_wl_cl): Add prototypes.
	(dvp_macro): New type.

end-sanitize-sky
Tue Mar 24 18:32:47 1998  H.J. Lu  <hjl@gnu.org>

	* i386.h: Set LinearAddress for lidt and lgdt.

start-sanitize-sky
Mon Mar 23 10:00:19 1998  Doug Evans  <devans@canuck.cygnus.com>

	* dvp.h (vif_operand_datalen_special): Declare.

end-sanitize-sky
start-sanitize-r5900
Mon Mar 23 00:25:35 1998  Jeffrey A Law  (law@cygnus.com)

	* mips.h (OP_MASK_VU*, OP_SH_VU*): New definitions for
	r5900 vu0 gas support.

end-sanitize-r5900
start-sanitize-sky
Fri Mar  6 17:35:54 1998  Doug Evans  <devans@canuck.cygnus.com>

	* dvp.h (unpack_type): New enum.
	(vif_unpack_len_value,vif_unpack_len): Declare.

end-sanitize-sky
start-sanitize-vr4320
Tue Mar  3 11:45:09 1998  Gavin Koch  <gavin@cygnus.com>

	* mips.h (INSN_4320) : Added.

end-sanitize-vr4320
Mon Mar  2 10:44:07 1998  Doug Evans  <devans@seba.cygnus.com>

	* cgen.h (CGEN_BOOL_ATTR): New macro.

Thu Feb 26 15:54:31 1998  Michael Meissner  <meissner@cygnus.com>

	* d30v.h (FLAG_DELAY): New flag for delayed branches/jumps.

start-sanitize-sky
Fri Feb 27 10:00:44 1998  Doug Evans  <devans@canuck.cygnus.com>

	* dvp.h (VIF_FLAG_U): New macro.

Wed Feb 25 00:23:49 1998  Doug Evans  <devans@canuck.cygnus.com>

	* dvp.h (DVP_OPERAND_MIPS_ADDRESS): Renamed from DVP_OPERAND_ADDRESS.
	(DVP_OPERAND_VU_ADDRESS): New macro.
	(DVP_OPERAND_*): Renumber.

Tue Feb 24 10:44:17 1998  Doug Evans  <devans@canuck.cygnus.com>

	* dvp.h (dvp_cpu): Add DVP_UNKNOWN.
	(vif_insn_len): Update prototype.
	(gif_reg): Add recent register name/number changes.

end-sanitize-sky
Mon Feb 23 10:38:21 1998  Doug Evans  <devans@seba.cygnus.com>

	* cgen.h (CGEN_CAT3): Delete.  Use CONCAT3 now.
	(cgen_insn): Record syntax and format entries here, rather than
	separately.

start-sanitize-sky
Fri Feb 20 18:00:10 1998  Doug Evans  <devans@canuck.cygnus.com>

	* dvp.h (GIF_MAX_NLOOP,GIF_PRE): New macros.
	(gif_type): New type.
	(gif_nloop,gif_nregs,gif_operand_nloop): Declare.

Thu Feb 19 02:07:15 1998  Doug Evans  <devans@charmed.cygnus.com>

	* dvp.h (DVP_OPERAND_DMA_*): Rewrite.
	(DVP_OPERAND_AUTOCOUNT): New modifier.
	(dma_operand_{count,addr}): Declare.
	(DVP_OPCODE_IGNORE_DIS): New macro.

Wed Feb 18 15:48:50 1998  Doug Evans  <devans@canuck.cygnus.com>

	* dvp.h (DVP_OPERAND_FLOAT): New macro.

end-sanitize-sky
Tue Feb 17 21:42:56 1998  Nick Clifton  <nickc@cygnus.com>

	* cgen.h (CGEN_SYNTAX_MAKE_FIELD): New macro.

Tue Feb 17 16:00:56 1998  Doug Evans  <devans@seba.cygnus.com>

	* cgen.h (cgen_insert_fn): Change type of result to const char *.
	(cgen_parse_{signed,unsigned}_integer): Delete min,max arguments.
	(CGEN_{INSN,KEYWORD,OPERAND}_NBOOL_ATTRS): Renamed from ..._MAX_ATTRS.

Thu Feb 12 18:30:41 1998  Doug Evans  <devans@canuck.cygnus.com>

	* cgen.h (lookup_insn): New argument alias_p.

start-sanitize-sky
	* dvp.h (VU_FLAG_[IEMDT]): New macros.

end-sanitize-sky
Thu Feb 12 03:41:00 1998  J"orn Rennecke  <amylaar@cygnus.co.uk>

Fix rac to accept only a0:
	* d10v.h (OPERAND_ACC): Split into:
	(OPERAND_ACC0, OPERAND_ACC1) .
	(OPERAND_GPR): Define.

Wed Feb 11 17:31:53 1998  Doug Evans  <devans@seba.cygnus.com>

	* cgen.h (CGEN_FIELDS): Define here.
	(CGEN_HW_ENTRY): New member `type'.
	(hw_list): Delete decl.
	(enum cgen_mode): Declare.
	(CGEN_OPERAND): New member `hw'.
	(enum cgen_operand_instance_type): Declare.
	(CGEN_OPERAND_INSTANCE): New type.
	(CGEN_INSN): New member `operands'.
	(CGEN_OPCODE_DATA): Make hw_list const.
	(get_insn_operands,lookup_insn): Add prototypes for.

start-sanitize-sky
Tue Feb 10 13:04:06 1998  Doug Evans  <devans@canuck.cygnus.com>

	* dvp.h (*): PKE->VIF, GPUIF->GIF.

end-sanitize-sky
Tue Feb  3 17:11:23 1998  Doug Evans  <devans@seba.cygnus.com>

	* cgen.h (CGEN_INSN_MAX_ATTRS): Renamed from CGEN_MAX_INSN_ATTRS.
	(CGEN_HW_ENTRY): Move `next' entry to end of struct.
	(CGEN_KEYWORD_MAX_ATTRS): Renamed from CGEN_MAX_KEYWORD_ATTRS.
	(CGEN_OPERAND_MAX_ATTRS): Renamed from CGEN_MAX_OPERAND_ATTRS.

Mon Feb  2 19:19:15 1998  Ian Lance Taylor  <ian@cygnus.com>

	* cgen.h: Correct typo in comment end marker.

Mon Feb  2 17:10:38 1998  Steve Haworth  <steve@pm.cse.rmit.EDU.AU>

	* tic30.h: New file.

start-sanitize-sky
Wed Jan 28 09:52:31 1998  Doug Evans  <devans@canuck.cygnus.com>

	* dvp.h: New file.

end-sanitize-sky
Thu Jan 22 17:54:56 1998  Nick Clifton  <nickc@cygnus.com>

	* cgen.h: Add prototypes for cgen_save_fixups(),
	cgen_restore_fixups(), and cgen_swap_fixups().  Change prototype
	of cgen_asm_finish_insn() to return a char *.

Wed Jan 14 17:21:43 1998  Nick Clifton  <nickc@cygnus.com>

	* cgen.h: Formatting changes to improve readability.

Mon Jan 12 11:37:36 1998  Doug Evans  <devans@seba.cygnus.com>

	* cgen.h (*): Clean up pass over `struct foo' usage.
	(CGEN_ATTR): Make unsigned char.
	(CGEN_ATTR_TYPE): Update.
	(CGEN_ATTR_{ENTRY,TABLE}): New types.
	(cgen_base): Move member `attrs' to cgen_insn.
	(CGEN_KEYWORD): New member `null_entry'.
	(CGEN_{SYNTAX,FORMAT}): New types.
	(cgen_insn): Format and syntax separated from each other.

Tue Dec 16 15:15:52 1997  Michael Meissner  <meissner@cygnus.com>

	* d30v.h (d30v_opcode): Reorder flags somewhat, add new flags for
	2 word load/store, ADDppp/SUBppp, 16/32 bit multiply.  Make
	flags_{used,set} long.
	(d30v_operand): Make flags field long.

Mon Dec  1 12:24:44 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

	* m68k.h: Fix comment describing operand types.

Sun Nov 23 22:31:27 1997  Michael Meissner  <meissner@cygnus.com>

	* d30v.h (SHORT_CMPU): Add case for cmpu instruction, and move
	everything else after down.

Tue Nov 18 18:45:14 1997  J"orn Rennecke  <amylaar@cygnus.co.uk>

	* d10v.h (OPERAND_FLAG): Split into:
	(OPERAND_FFLAG, OPERAND_CFLAG) .

Thu Nov 13 11:04:24 1997  Gavin Koch  <gavin@cygnus.com>

	* mips.h (struct mips_opcode): Changed comments to reflect new
	field usage.

start-sanitize-tx49
Wed Oct 29 17:33:37 1997  Gavin Koch  <gavin@cygnus.com>

	* mips.h (INSN_4900): Added.

end-sanitize-tx49
Fri Oct 24 22:36:20 1997  Ken Raeburn  <raeburn@cygnus.com>

	* mips.h: Added to comments a quick-ref list of all assigned
	operand type characters.
	(OP_{MASK,SH}_PERFREG): New macros.
start-sanitize-cygnus
	(OP_{MASK,SH}_{VECBYTE,VECALIGN}): New macros for VR5400
	support.
end-sanitize-cygnus

Wed Oct 22 17:28:33 1997  Richard Henderson  <rth@cygnus.com>

	* sparc.h: Add '_' and '/' for v9a asr's.
	Patch from David Miller <davem@vger.rutgers.edu>

Tue Oct 14 13:22:29 1997  Jeffrey A Law  (law@cygnus.com)

	* h8300.h: Bit ops with absolute addresses not in the 8 bit
	area are not available in the base model (H8/300).

Thu Sep 25 13:03:41 1997  Ian Lance Taylor  <ian@cygnus.com>

	* m68k.h: Remove documentation of ` operand specifier.

Wed Sep 24 19:00:34 1997  Ian Lance Taylor  <ian@cygnus.com>

	* m68k.h: Document q and v operand specifiers.

Mon Sep 15 18:28:37 1997  Nick Clifton  <nickc@cygnus.com>

	* v850.h (struct v850_opcode): Add processors field.
	(PROCESSOR_V850, PROCESSOR_ALL): New bit constants.
start-sanitize-v850e
	(PROCESSOR_V850E, PROCESSOR_NOT_V850): New bit constants.
	(PROCESSOR_V850EA): New bit constants.
end-sanitize-v850e

Mon Sep 15 11:29:43 1997  Ken Raeburn  <raeburn@cygnus.com>

	Merge changes from Martin Hunt:

	* d30v.h: Allow up to 64 control registers. Add
	SHORT_A5S format.

	* d30v.h (LONG_Db): New form for delayed branches.

	* d30v.h: (LONG_Db): New form for repeati.

	* d30v.h (SHORT_D2B): New form.

	* d30v.h (SHORT_A2): New form.

	* d30v.h (OPERAND_2REG): Add new operand to indicate 2
	registers are used.  Needed for VLIW optimization.

Mon Sep  8 14:05:45 1997  Doug Evans  <dje@canuck.cygnus.com>

	* cgen.h: Move assembler interface section
	up so cgen_parse_operand_result is defined for cgen_parse_address.
	(cgen_parse_address): Update prototype.

Tue Sep  2 15:32:32 1997  Nick Clifton  <nickc@cygnus.com>

	* v850.h (V850_OPREAND_ADJUST_SHORT_MEMORY): Removed.

Tue Aug 26 12:21:52 1997  Ian Lance Taylor  <ian@cygnus.com>

	* i386.h (two_byte_segment_defaults): Correct base register 5 in
	modes 1 and 2 to be ss rather than ds.  From Gabriel Paubert
	<paubert@iram.es>.

	* i386.h: Set ud2 to 0x0f0b.  From Gabriel Paubert
	<paubert@iram.es>.

	* i386.h: Comment fixes for ficom[p]?{s,l} from Gabriel Paubert
	<paubert@iram.es>.

	* i386.h (JUMP_ON_CX_ZERO): Uncomment (define again).
	(JUMP_ON_ECX_ZERO): Remove commented out macro.

Fri Aug 22 10:38:29 1997  Nick Clifton  <nickc@cygnus.com>

	* v850.h (V850_NOT_R0): New flag.

Mon Aug 18 11:05:58 1997  Nick Clifton  <nickc@cygnus.com>

	* v850.h (struct v850_opcode): Remove flags field.

Wed Aug 13 18:45:48 1997  Nick Clifton  <nickc@cygnus.com>

	* v850.h (struct v850_opcode): Add flags field.
	(struct v850_operand): Extend meaning of 'bits' and 'shift'
	fields.

start-sanitize-v850e
	(V850E_INSTRUCTION, V850EA_INSTRUCTION): New flags.
	(V850E_PUSH_POP, V850E_IMMEDIATE16, V850E_IMMEDIATE32): New flags.
end-sanitize-v850e

Fri Aug  8 16:58:42 1997  Doug Evans  <dje@canuck.cygnus.com>

	* arc.h: New file.

Thu Jul 24 21:16:58 1997  Doug Evans  <dje@canuck.cygnus.com>

	* sparc.h (sparc_opcodes): Declare as const.

Thu Jul 10 12:53:25 1997  Jeffrey A Law  (law@cygnus.com)

	* mips.h (FP_S, FP_D): Define.  Bitmasks indicating if an insn
	uses single or double precision floating point resources.
	(INSN_NO_ISA, INSN_ISA1): Define.
	(cpu specific INSN macros): Tweak into bitmasks outside the range
	of INSN_ISA field.

Mon Jun 16 14:10:00 1997  H.J. Lu  <hjl@gnu.ai.mit.edu>

	* i386.h: Fix pand opcode.

Mon Jun  2 11:35:09 1997  Gavin Koch  <gavin@cygnus.com>

	* mips.h: Widen INSN_ISA and move it to a more convenient
	bit position.  Add INSN_3900.

Tue May 20 11:25:29 1997  Gavin Koch  <gavin@cygnus.com>

	* mips.h (struct mips_opcode): added new field membership.

Mon May 12 16:26:50 1997  H.J. Lu  <hjl@gnu.ai.mit.edu>

	* i386.h (movd): only Reg32 is allowed.

	* i386.h: add fcomp and ud2.  From Wayne Scott
	<wscott@ichips.intel.com>.

Mon May  5 17:16:21 1997  Ian Lance Taylor  <ian@cygnus.com>

	* i386.h: Add MMX instructions.

Mon May  5 12:45:19 1997  H.J. Lu  <hjl@gnu.ai.mit.edu>

	* i386.h: Remove W modifier from conditional move instructions.

Mon Apr 14 14:56:58 1997  Ian Lance Taylor  <ian@cygnus.com>

	* i386.h: Change the opcodes for fsubp, fsubrp, fdivp, and fdivrp
	with no arguments to match that generated by the UnixWare
	assembler.

Thu Apr 10 14:35:00 1997  Doug Evans  <dje@canuck.cygnus.com>

	* cgen.h (<cpu>_cgen_assemble_insn): New arg for errmsg.
	(cgen_parse_operand_fn): Declare.
	(cgen_init_parse_operand): Declare.
	(cgen_parse_operand): Renamed from cgen_asm_parse_operand,
	new argument `want'.
	(enum cgen_parse_operand_result): Renamed from cgen_asm_result.
	(enum cgen_parse_operand_type): New enum.

Sat Apr  5 13:14:05 1997  Ian Lance Taylor  <ian@cygnus.com>

	* i386.h: Revert last patch for the NON_BROKEN_OPCODES cases.

Fri Apr  4 11:46:11 1997  Doug Evans  <dje@canuck.cygnus.com>

	* cgen.h: New file.

Fri Apr  4 14:02:32 1997  Ian Lance Taylor  <ian@cygnus.com>

	* i386.h: Correct opcode values for fsubp, fsubrp, fdivp, and
	fdivrp.

Tue Mar 25 22:57:26 1997  Stu Grossman  (grossman@critters.cygnus.com)

	* v850.h (extract):  Make unsigned.

Mon Mar 24 14:38:15 1997  Ian Lance Taylor  <ian@cygnus.com>

	* i386.h: Add iclr.

Thu Mar 20 19:49:10 1997  Ian Lance Taylor  <ian@cygnus.com>

	* i386.h: Change DW to W for cmpxchg and xadd, since they don't
	take a direction bit.

start-sanitize-coldfire
Wed Mar 19 06:24:58 1997  J.T. Conklin  <jtc@cygnus.com>

	* m68k.h (mcfmac, mcfdiv): New macros.

end-sanitize-coldfire
Sat Mar 15 19:03:29 1997  H.J. Lu  <hjl@lucon.org>

	* sparc.h (sparc_opcode_lookup_arch): Use full prototype.

Fri Mar 14 15:22:01 1997  Ian Lance Taylor  <ian@cygnus.com>

	* sparc.h: Include <ansidecl.h>.  Update function declarations to
	use prototypes, and to use const when appropriate.

Thu Mar  6 14:18:30 1997  Jeffrey A Law  (law@cygnus.com)

	* mn10300.h (MN10300_OPERAND_RELAX): Define.

Mon Feb 24 15:15:56 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>

	* d10v.h: Change pre_defined_registers to
	d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.

Sat Feb 22 21:25:00 1997  Dawn Perchik  <dawn@cygnus.com>

	* mips.h: Add macros for cop0, cop1 cop2 and cop3.
	Change mips_opcodes from const array to a pointer,
	and change bfd_mips_num_opcodes from const int to int,
	so that we can increase the size of the mips opcodes table
	dynamically.

Fri Feb 21 16:34:18 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>

	* d30v.h (FLAG_X): Remove unused flag.

Tue Feb 18 17:37:20 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>

	* d30v.h: New file.

start-sanitize-tic80
Fri Feb 14 13:16:15 1997  Fred Fish  <fnf@cygnus.com>

	* tic80.h (PDS_NAME): Macro to access name field of predefined symbols.
	(PDS_VALUE): Macro to access value field of predefined symbols.
	(tic80_next_predefined_symbol): Add prototype.

end-sanitize-tic80
start-sanitize-r5900
Fri Feb  7 11:12:44 1997  Gavin Koch  <gavin@cygnus.com>

        * mips.h: add r5900.

end-sanitize-r5900
start-sanitize-tic80
Mon Feb 10 10:32:17 1997  Fred Fish  <fnf@cygnus.com>

	* tic80.h (tic80_symbol_to_value): Change prototype to match
	change in function, added class parameter.

Thu Feb  6 17:30:15 1997  Fred Fish  <fnf@cygnus.com>

	* tic80.h (TIC80_OPERAND_ENDMASK): Add for flagging TIc80
	endmask fields, which are somewhat weird in that 0 and 32 are
	treated exactly the same.

Thu Jan 30 13:46:18 1997  Fred Fish  <fnf@cygnus.com>

	* tic80.h: Change all the OPERAND defines to use the form (1 << X)
	rather than a constant that is 2**X.  Reorder them to put bits for
	operands that have symbolic names in the upper bits, so they can
	be packed into an int where the lower bits contain the value that
	corresponds to that symbolic name.
	(predefined_symbo): Add struct.
	(tic80_predefined_symbols): Declare array of translations.
	(tic80_num_predefined_symbols): Declare size of that array.
	(tic80_value_to_symbol): Declare function.
	(tic80_symbol_to_value): Declare function.

end-sanitize-tic80
Wed Jan 29 09:37:25 1997  Jeffrey A Law  (law@cygnus.com)

	* mn10200.h (MN10200_OPERAND_RELAX): Define.

start-sanitize-tic80
Sat Jan 18 15:18:59 1997  Fred Fish  <fnf@cygnus.com>

	* tic80.h (TIC80_NO_R0_DEST): Add for opcodes where r0 cannot
	be the destination register.

Thu Jan 16 20:48:55 1997  Fred Fish  <fnf@cygnus.com>

	* tic80.h (struct tic80_opcode): Change "format" field to "flags".
	(FMT_UNUSED, FMT_SI, FMT_LI, FMT_REG): Delete.
	(TIC80_VECTOR): Define a flag bit for the flags.  This one means
	that the opcode can have two vector instructions in a single
	32 bit word and we have to encode/decode both.

Tue Jan 14 19:37:09 1997  Fred Fish  <fnf@cygnus.com>

	* tic80.h (TIC80_OPERAND_PCREL): Renamed from
	TIC80_OPERAND_RELATIVE for PC relative.
	(TIC80_OPERAND_BASEREL): New flag bit for register
	base relative.

Mon Jan 13 15:56:38 1997  Fred Fish  <fnf@cygnus.com>

	* tic80.h (TIC80_OPERAND_FLOAT): Add for floating point operands.

Mon Jan  6 10:51:15 1997  Fred Fish  <fnf@cygnus.com>

	* tic80.h (TIC80_OPERAND_SCALED): Operand may have optional
	":s" modifier for scaling.

Sun Jan  5 12:12:19 1997  Fred Fish  <fnf@cygnus.com>

	* tic80.h (TIC80_OPERAND_M_SI): Add operand modifier for ":m".
	(TIC80_OPERAND_M_LI): Ditto

Sat Jan  4 19:02:44 1997  Fred Fish  <fnf@cygnus.com>

	* tic80.h (TIC80_OPERAND_BITNUM): Renamed from TIC80_OPERAND_CC_SZ.
	(TIC80_OPERAND_CC): New define for condition code operand.
	(TIC80_OPERAND_CR): New define for control register operand.

Fri Jan  3 16:22:23 1997  Fred Fish  <fnf@cygnus.com>

	* tic80.h (struct tic80_opcode): Name changed.
	(struct tic80_opcode): Remove format field.
	(struct tic80_operand): Add insertion and extraction functions.
	(TIC80_OPERAND_*): Remove old bogus values, start adding new
	correct ones.
	(FMT_*): Ditto.

end-sanitize-tic80
Tue Dec 31 15:05:41 1996  Michael Meissner  <meissner@tiktok.cygnus.com>

	* v850.h (V850_OPERAND_ADJUST_SHORT_MEMORY): New flag to adjust
	type IV instruction offsets.

start-sanitize-tic80
Fri Dec 27 22:23:10 1996  Fred Fish  <fnf@cygnus.com>

	* tic80.h: New file.

end-sanitize-tic80
Wed Dec 18 10:06:31 1996  Jeffrey A Law  (law@cygnus.com)

	* mn10200.h (MN10200_OPERAND_NOCHECK): Define.

Sat Dec 14 10:48:31 1996  Fred Fish  <fnf@ninemoons.com>

	* mn10200.h: Fix comment, mn10200_operand not powerpc_operand.
	* mn10300.h: Fix comment, mn10300_operand not powerpc_operand.
	* v850.h: Fix comment, v850_operand not powerpc_operand.

Mon Dec  9 16:45:39 1996  Jeffrey A Law  (law@cygnus.com)

	* mn10200.h: Flesh out structures and definitions needed by
	the mn10200 assembler & disassembler.

Tue Nov 26 10:46:56 1996  Ian Lance Taylor  <ian@cygnus.com>

	* mips.h: Add mips16 definitions.

Mon Nov 25 17:56:54 1996  J.T. Conklin  <jtc@cygnus.com>

	* m68k.h: Document new <, >, m, n, o and p operand specifiers.

Wed Nov 20 10:59:41 1996  Jeffrey A Law  (law@cygnus.com)

	* mn10300.h (MN10300_OPERAND_PCREL): Define.
	(MN10300_OPERAND_MEMADDR): Define.

Tue Nov 19 13:30:40 1996  Jeffrey A Law  (law@cygnus.com)

	* mn10300.h (MN10300_OPERAND_REG_LIST): Define.

Wed Nov  6 13:41:08 1996  Jeffrey A Law  (law@cygnus.com)

	* mn10300.h (MN10300_OPERAND_SPLIT): Define.

Tue Nov  5 13:26:12 1996  Jeffrey A Law  (law@cygnus.com)

	* mn10300.h (MN10300_OPERAND_EXTENDED): Define.

Mon Nov  4 12:52:48 1996  Jeffrey A Law  (law@cygnus.com)

	* mn10300.h (MN10300_OPERAND_REPEATED): Define.

Fri Nov  1 10:31:02 1996  Richard Henderson  <rth@tamu.edu>

	* alpha.h: Don't include "bfd.h"; private relocation types are now
 	negative to minimize problems with shared libraries.  Organize
 	instruction subsets by AMASK extensions and PALcode
 	implementation.
	(struct alpha_operand): Move flags slot for better packing.

Tue Oct 29 12:19:10 1996  Jeffrey A Law  (law@cygnus.com)

	* v850.h (V850_OPERAND_RELAX): New operand flag.

Thu Oct 10 14:29:11 1996  Jeffrey A Law  (law@cygnus.com)

	* mn10300.h (FMT_*): Move operand format definitions
	here.

Tue Oct  8 14:48:07 1996  Jeffrey A Law  (law@cygnus.com)

	* mn10300.h (MN10300_OPERAND_PAREN): Define.

Mon Oct  7 16:52:11 1996  Jeffrey A Law  (law@cygnus.com)

	* mn10300.h (mn10300_opcode): Add "format" field.
	(MN10300_OPERAND_*): Define.

Thu Oct  3 10:33:46 1996  Jeffrey A Law  (law@cygnus.com)

	* mn10x00.h: Delete.
	* mn10200.h, mn10300.h: New files.

Wed Oct  2 21:31:26 1996  Jeffrey A Law  (law@cygnus.com)

	* mn10x00.h: New file.

Fri Sep 27 18:26:46 1996  Stu Grossman  (grossman@critters.cygnus.com)

	* v850.h:  Add new flag to indicate this instruction uses a PC
	displacement.

Fri Sep 13 14:58:13 1996  Jeffrey A Law  (law@cygnus.com)

	* h8300.h (stmac): Add missing instruction.

Sat Aug 31 16:02:03 1996  Jeffrey A Law  (law@cygnus.com)

	* v850.h (v850_opcode): Remove "size" field.  Add "memop"
	field.

Fri Aug 23 10:39:08 1996  Jeffrey A Law  (law@cygnus.com)

	* v850.h (V850_OPERAND_EP): Define.

	* v850.h (v850_opcode): Add size field.

Thu Aug 22 16:51:25 1996  J.T. Conklin  <jtc@rtl.cygnus.com>

	* v850.h (v850_operands): Add insert and extract fields, pointers
 	to functions used to handle unusual operand encoding.
	(V850_OPERAND_REG, V850_OPERAND_SRG, V850_OPERAND_CC,
 	V850_OPERAND_SIGNED): Defined.

Wed Aug 21 17:45:10 1996  J.T. Conklin  <jtc@rtl.cygnus.com>

	* v850.h (v850_operands): Add flags field.
	(OPERAND_REG, OPERAND_NUM): Defined.

Tue Aug 20 14:52:02 1996  J.T. Conklin  <jtc@rtl.cygnus.com>

	* v850.h: New file.

Fri Aug 16 14:44:15 1996  James G. Smith  <jsmith@cygnus.co.uk>

	* mips.h (OP_SH_LOCC, OP_SH_HICC, OP_MASK_CC, OP_SH_COP1NORM,
 	OP_MASK_COP1NORM, OP_SH_COP1SPEC, OP_MASK_COP1SPEC,
 	OP_MASK_COP1SCLR, OP_MASK_COP1CMP, OP_SH_COP1CMP, OP_SH_FORMAT,
 	OP_MASK_FORMAT, OP_SH_TRUE, OP_MASK_TRUE, OP_SH_GE, OP_MASK_GE,
 	OP_SH_UNSIGNED, OP_MASK_UNSIGNED, OP_SH_HINT, OP_MASK_HINT):
 	Defined.

Fri Aug 16 00:15:15 1996  Jeffrey A Law  (law@cygnus.com)

	* hppa.h (pitlb, pitlbe, iitlba, iitlbp, fic, fice): Accept
	a 3 bit space id instead of a 2 bit space id.

Thu Aug 15 13:11:46 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>

	* d10v.h: Add some additional defines to support the
 	assembler in determining which operations can be done in parallel.

Tue Aug  6 11:13:22 1996  Jeffrey A Law  (law@cygnus.com)

	* h8300.h (SN): Define.
	(eepmov.b): Renamed from "eepmov"
	(nop, bpt, rte, rts, sleep, clrmac): These have no size associated
	with them.

Fri Jul 26 11:47:10 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>

	* d10v.h (OPERAND_SHIFT): New operand flag.

Thu Jul 25 12:06:22 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>

	* d10v.h: Changes for divs, parallel-only instructions, and
 	signed numbers.

Mon Jul 22 11:21:15 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>

	* d10v.h (pd_reg): Define. Putting the definition here allows
	the assembler and disassembler to share the same struct.

Mon Jul 22 12:15:25 1996  Ian Lance Taylor  <ian@cygnus.com>

	* i960.h (i960_opcodes): "halt" takes an argument.  From Stephen
	Williams <steve@icarus.com>.

Wed Jul 17 14:46:38 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>

	* d10v.h: New file.

Thu Jul 11 12:09:15 1996  Jeffrey A Law  (law@cygnus.com)

	* h8300.h (band, bclr): Force high bit of immediate nibble to zero.

Wed Jul  3 14:30:12 1996  J.T. Conklin  <jtc@rtl.cygnus.com>

 	* m68k.h (mcf5200): New macro.
	Document names of coldfire control registers.

Tue Jul  2 23:05:45 1996  Jeffrey A Law  (law@cygnus.com)

	* h8300.h (SRC_IN_DST): Define.

	* h8300.h (UNOP3): Mark the register operand in this insn
	as a source operand, not a destination operand.
	(SHIFT_2, SHIFT_IMM): Remove.  Eliminate all references.
	(UNOP3): Change SHIFT_IMM to IMM for H8/S bitops.  Mark
	register operand with SRC_IN_DST.

Fri Jun 21 13:52:17 1996  Richard Henderson  <rth@tamu.edu>

	* alpha.h: New file.

Thu Jun 20 15:02:57 1996  Ian Lance Taylor  <ian@cygnus.com>

	* rs6k.h: Remove obsolete file.

Wed Jun 19 15:29:38 1996  Ian Lance Taylor  <ian@cygnus.com>

	* i386.h: Correct opcode values for faddp, fsubp, fsubrp, fmulp,
	fdivp, and fdivrp.  Add ffreep.

Tue Jun 18 16:06:00 1996  Jeffrey A. Law  <law@rtl.cygnus.com>

	* h8300.h: Reorder various #defines for readability.
	(ABS32SRC, ABS32DST, DSP32LIST, ABS32LIST, A32LIST): Define.
	(BITOP): Accept additional (unused) argument.  All callers changed.
	(EBITOP): Likewise.
	(O_LAST): Bump.
	(ldc, stc, movb, movw, movl): Use 32bit offsets and absolutes.

	* h8300.h (EXR, SHIFT_2, MACREG, SHIFT_IMM, RDINC): Define.
	(O_TAS, O_CLRMAC, O_LDMAC, O_MAC, O_LDM, O_STM): Define.
	(BITOP, EBITOP): Handle new H8/S addressing modes for
	bit insns.
	(UNOP3): Handle new shift/rotate insns on the H8/S.
	(insns using exr): New instructions.
	(tas, mac, ldmac, clrmac, ldm, stm): New instructions.

Thu May 23 16:56:48 1996  Jeffrey A Law  (law@cygnus.com)

	* h8300.h (add.l): Undo Apr 5th change.  The manual I had
	was incorrect.

Mon May  6 23:38:22 1996  Jeffrey A Law  (law@cygnus.com)

	* h8300.h (START): Remove.
	(MEMRELAX): Define.  Mark absolute memory operands in mov.b, mov.w
	and mov.l insns that can be relaxed.

Tue Apr 30 18:30:58 1996  Ian Lance Taylor  <ian@cygnus.com>

	* i386.h: Remove Abs32 from lcall.

Mon Apr 22 17:09:23 1996  Doug Evans  <dje@blues.cygnus.com>

	* sparc.h (SPARC_OPCODE_ARCH_V9_P): New macro.
	(SLCPOP): New macro.
	Mark X,Y opcode letters as in use.

Thu Apr 11 17:28:18 1996  Ian Lance Taylor  <ian@cygnus.com>

	* sparc.h (F_FLOAT, F_FBR): Define.

Fri Apr  5 16:55:34 1996  Jeffrey A Law  (law@cygnus.com)

	* h8300.h (ABS8MEM): Renamed from ABSMOV.  Remove ABSMOV
	from all insns.
	(ABS8SRC,ABS8DST): Add ABS8MEM.
	(add.l): Fix reg+reg variant.
	(eepmov.w): Renamed from eepmovw.
	(ldc,stc): Fix many cases.

Sun Mar 31 13:30:03 1996  Doug Evans  <dje@canuck.cygnus.com>

	* sparc.h (SPARC_OPCODE_ARCH_MASK): New macro.

Thu Mar  7 15:08:23 1996  Doug Evans  <dje@charmed.cygnus.com>

	* sparc.h (O): Mark operand letter as in use.

Tue Feb 20 20:46:21 1996  Doug Evans  <dje@charmed.cygnus.com>

	* sparc.h (sparc_{encode,decode}_sparclet_cpreg): Declare.
	Mark operand letters uU as in use.

Mon Feb 19 01:59:08 1996  Doug Evans  <dje@charmed.cygnus.com>

	* sparc.h (sparc_opcode_arch_val): Add SPARC_OPCODE_ARCH_SPARCLET.
	(sparc_opcode_arch): Delete member `conflicts'.  Add `supported'.
	(SPARC_OPCODE_SUPPORTED): New macro.
	(SPARC_OPCODE_CONFLICT_P): Rewrite.
	(F_NOTV9): Delete.

Fri Feb 16 12:23:34 1996  Jeffrey A Law  (law@cygnus.com)

	* sparc.h (sparc_opcode_lookup_arch) Make return type in
	declaration consistent with return type in definition.

Wed Feb 14 18:14:11 1996  Alan Modra  <alan@spri.levels.unisa.edu.au>

	* i386.h (i386_optab): Remove Data32 from pushf and popf.

Thu Feb  8 14:27:21 1996  James Carlson <carlson@xylogics.com>

	* i386.h (i386_regtab): Add 80486 test registers.

Mon Feb  5 18:35:46 1996  Ian Lance Taylor  <ian@cygnus.com>

	* i960.h (I_HX): Define.
	(i960_opcodes): Add HX instruction.

Mon Jan 29 12:43:39 1996  Ken Raeburn  <raeburn@cygnus.com>

	* i386.h: Fix waiting forms of finit, fstenv, fsave, fstsw, fstcw,
	and fclex.

Wed Jan 24 22:36:59 1996  Doug Evans  <dje@charmed.cygnus.com>

	* sparc.h (enum sparc_opcode_arch_val): Replaces sparc_architecture.
	(SPARC_OPCODE_CONFLICT_P): Renamed from ARCHITECTURES_CONFLICT_P.
	(bfd_* defines): Delete.
	(sparc_opcode_archs): Replaces architecture_pname.
	(sparc_opcode_lookup_arch): Declare.
	(NUMOPCODES): Delete.

Mon Jan 22 08:24:32 1996  Doug Evans  <dje@charmed.cygnus.com>

	* sparc.h (enum sparc_architecture): Add v9a.
	(ARCHITECTURES_CONFLICT_P): Update.

Thu Dec 28 13:27:53 1995  John Hassey  <hassey@rtp.dg.com>

	* i386.h: Added Pentium Pro instructions.

Thu Nov  2 22:59:22 1995  Ian Lance Taylor  <ian@cygnus.com>

	* m68k.h: Document new 'W' operand place.

Tue Oct 24 10:49:10 1995  Jeffrey A Law  (law@cygnus.com)

	* hppa.h: Add lci and syncdma instructions.

Mon Oct 23 11:09:16 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>

	* mips.h: Added INSN_4100 flag to mark NEC VR4100 specific
 	instructions.

Mon Oct 16 10:28:15 1995  Michael Meissner  <meissner@tiktok.cygnus.com>

	* ppc.h (PPC_OPCODE_{COMMON,ANY}): New opcode flags for
	assembler's -mcom and -many switches.

Wed Oct 11 16:56:33 1995  Ken Raeburn  <raeburn@cygnus.com>

	* i386.h: Fix cmpxchg8b extension opcode description.

Thu Oct  5 18:03:36 1995  Ken Raeburn  <raeburn@cygnus.com>

	* i386.h: Add Pentium instructions wrmsr, rdtsc, rdmsr, cmpxchg8b,
	and register cr4.

Tue Sep 19 15:26:43 1995  Ian Lance Taylor  <ian@cygnus.com>

	* m68k.h: Change comment: split type P into types 0, 1 and 2.

Wed Aug 30 13:50:55 1995  Doug Evans  <dje@canuck.cygnus.com>

	* sparc.h (sparc_{encode,decode}_prefetch): Declare.

Tue Aug 29 15:34:58 1995  Doug Evans  <dje@canuck.cygnus.com>

	* sparc.h (sparc_{encode,decode}_{asi,membar}): Declare.

Wed Aug  2 18:32:19 1995  Ian Lance Taylor  <ian@cygnus.com>

	* m68kmri.h: Remove.

	* m68k.h: Move tables into opcodes/m68k-opc.c, leaving just the
	declarations.  Remove F_ALIAS and flag field of struct
	m68k_opcode.  Change arch field of struct m68k_opcode to unsigned
	int.  Make name and args fields of struct m68k_opcode const.

Wed Aug  2 08:16:46 1995  Doug Evans  <dje@canuck.cygnus.com>

	* sparc.h (F_NOTV9): Define.

Tue Jul 11 14:20:42 1995  Jeff Spiegel  <jeffs@lsil.com>

	* mips.h (INSN_4010): Define.

Wed Jun 21 18:49:51 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>

	* m68k.h (TBL1): Reverse sense of "round" argument in result.

	Changes from Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>:
	* m68k.h: Fix argument descriptions of coprocessor
	instructions to allow only alterable operands where appropriate.
	[!NO_DEFAULT_SIZES]: An omitted size defaults to `w'.
	(m68k_opcode_aliases): Add more aliases.

Fri Apr 14 22:15:34 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>

	* m68k.h: Added explcitly short-sized conditional branches, and a
	bunch of aliases (fmov*, ftest*, tdivul) to support gcc's
	svr4-based configurations.

Mon Mar 13 21:30:01 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>

	Mon Feb 27 08:36:39 1995  Bryan Ford  <baford@cs.utah.edu>
	* i386.h: added missing Data16/Data32 flags to a few instructions.

Wed Mar  8 15:19:53 1995  Ian Lance Taylor  <ian@cygnus.com>

	* mips.h (OP_MASK_FR, OP_SH_FR): Define.
	(OP_MASK_BCC, OP_SH_BCC): Define.
	(OP_MASK_PREFX, OP_SH_PREFX): Define.
	(OP_MASK_CCC, OP_SH_CCC): Define.
	(INSN_READ_FPR_R): Define.
	(INSN_RFE): Delete.

Wed Mar  8 03:13:23 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>

	* m68k.h (enum m68k_architecture): Deleted.
	(struct m68k_opcode_alias): New type.
	(m68k_opcodes): Now const.  Deleted opcode aliases with exactly
	matching constraints, values and flags.  As a side effect of this,
	the MOTOROLA_SYNTAX_ONLY and MIT_SYNTAX_ONLY macros, which so far
	as I know were never used, now may need re-examining.
	(numopcodes): Now const.
	(m68k_opcode_aliases, numaliases): New variables.
	(endop): Deleted.
	[DONT_DEFINE_TABLE]: Declare numopcodes, numaliases, and
	m68k_opcode_aliases; update declaration of m68k_opcodes.

Mon Mar  6 10:02:00 1995  Jeff Law  (law@snake.cs.utah.edu)

	* hppa.h (delay_type): Delete unused enumeration.
	(pa_opcode): Replace unused delayed field with an architecture
	field.
	(pa_opcodes): Mark each instruction as either PA1.0 or PA1.1.

Fri Mar  3 16:10:24 1995  Ian Lance Taylor  <ian@cygnus.com>

	* mips.h (INSN_ISA4): Define.

Fri Feb 24 19:13:37 1995  Ian Lance Taylor  <ian@cygnus.com>

	* mips.h (M_DLA_AB, M_DLI): Define.

Thu Feb 23 17:33:09 1995  Jeff Law  (law@snake.cs.utah.edu)

	* hppa.h (fstwx): Fix single-bit error.

Wed Feb 15 12:19:52 1995  Ian Lance Taylor  <ian@cygnus.com>

	* mips.h (M_ULD, M_ULD_A, M_USD, M_USD_A): Define.

Mon Feb  6 10:35:23 1995  J.T. Conklin  <jtc@rtl.cygnus.com>

	* i386.h: added cpuid instruction , and dr[0-7] aliases for the
	  debug registers.  From Charles Hannum (mycroft@netbsd.org).

Mon Feb  6 03:31:54 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>

	Changes from Bryan Ford <baford@schirf.cs.utah.edu> for 16-bit
	i386 support:
	* i386.h (MOV_AX_DISP32): New macro.
	(i386_optab): Added Data16 and Data32 as needed.  Added "w" forms
	of several call/return instructions.
	(ADDR_PREFIX_OPCODE): New macro.

Mon Jan 23 16:45:43 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>

	Sat Jan 21 17:50:38 1995  Pat Rankin  (rankin@eql.caltech.edu)

	* ../include/opcode/vax.h (struct vot_wot, field `args'):  make
	it pointer to const char;
	(struct vot, field `name'):  ditto.

Thu Jan 19 14:47:53 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>

	* vax.h: Supply and properly group all values in end sentinel.

Tue Jan 17 10:55:30 1995  Ian Lance Taylor  <ian@sanguine.cygnus.com>

	* mips.h (INSN_ISA, INSN_4650): Define.

Wed Oct 19 13:34:17 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>

	* a29k.h: Add operand type 'I' for `inv' and `iretinv'.  On
	systems with a separate instruction and data cache, such as the
	29040, these instructions take an optional argument.

Wed Sep 14 17:44:20 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)

	* mips.h (INSN_STORE_MEMORY): Correct value to not conflict with
	INSN_TRAP.

Tue Sep  6 11:39:08 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)

	* mips.h (INSN_STORE_MEMORY): Define.

Thu Jul 28 19:28:07 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)

	* sparc.h: Document new operand type 'x'.

Tue Jul 26 17:48:05 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)

	* i960.h (I_CX2): New instruction category.  It includes
	instructions available on Cx and Jx processors.
	(I_JX): New instruction category, for JX-only instructions.
	(i960_opcodes): Put eshro and sysctl in I_CX2 category.  Added
	Jx-only instructions, in I_JX category.

Wed Jul 13 18:43:47 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)

	* ns32k.h (endop): Made pointer const too.

Sun Jul 10 11:01:09 1994  Ian Dall  (dall@hfrd.dsto.gov.au)

	* ns32k.h: Drop Q operand type as there is no correct use
	for it. Add I and Z operand types which allow better checking.

Thu Jul  7 12:34:48 1994  Steve Chamberlain  (sac@jonny.cygnus.com)

	* h8300.h (xor.l) :fix bit pattern.
	(L_2): New size of operand.
	(trapa): Use it.

Fri Jun 10 16:38:11 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* m68k.h: Move "trap" before "tpcc" to change disassembly.

Fri Jun  3 15:57:36 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)

	* sparc.h: Include v9 definitions.

Thu Jun  2 12:23:17 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)

	* m68k.h (m68060): Defined.
	(m68040up, mfloat, mmmu): Include it.
	(struct m68k_opcode): Widen `arch' field.
	(m68k_opcodes): Updated for M68060.  Removed comments that were
	instructions commented out by "JF" years ago.

Thu Apr 28 18:31:14 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)

	* m68k.h (struct m68k_opcode): Shorten `arch' field to 8 bits, and
	add a one-bit `flags' field.
	(F_ALIAS): New macro.

Wed Apr 27 11:29:52 1994  Steve Chamberlain  (sac@cygnus.com)

	* h8300.h (dec, inc): Get encoding right.

Mon Apr  4 13:12:43 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* ppc.h (struct powerpc_operand): Removed signedp field; just use
	a flag instead.
	(PPC_OPERAND_SIGNED): Define.
	(PPC_OPERAND_SIGNOPT): Define.

Thu Mar 31 19:34:08 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)

	* i386.h (IS_JUMP_ON_ECX_ZERO, "jcxz" pattern): Operand size
	prefix is 0x66, not 0x67.  Patch from H.J. Lu (hlu@nynexst.com).

Thu Mar  3 15:51:05 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)

	* i386.h: Reverse last change.  It'll be handled in gas instead.

Thu Feb 24 15:29:05 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)

	* i386.h (sar): Disabled the two-operand Imm1 form, since it was
	slower on the 486 and used the implicit shift count despite the
	explicit operand.  The one-operand form is still available to get
	the shorter form with the implicit shift count.

Thu Feb 17 12:27:52 1994  Torbjorn Granlund  (tege@mexican.cygnus.com)

	* hppa.h: Fix typo in fstws arg string.

Wed Feb  9 21:23:52 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* ppc.h (struct powerpc_opcode): Make operands field unsigned.

Mon Feb  7 19:14:58 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* ppc.h (PPC_OPCODE_601): Define.

Fri Feb  4 23:43:50 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

	* hppa.h (addb): Use '@' for addb and addib pseudo ops.
	(so we can determine valid completers for both addb and addb[tf].)

	* hppa.h (xmpyu): No floating point format specifier for the
	xmpyu instruction.

Fri Feb  4 23:36:52 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* ppc.h (PPC_OPERAND_NEXT): Define.
	(PPC_OPERAND_NEGATIVE): Change value to make room for above.
	(struct powerpc_macro): Define.
	(powerpc_macros, powerpc_num_macros): Declare.

Fri Jan 21 19:13:50 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* ppc.h: New file.  Header file for PowerPC opcode table.

Mon Jan 17 00:14:23 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

	* hppa.h: More minor template fixes for sfu and copr (to allow
	for easier disassembly).

	* hppa.h: Fix templates for all the sfu and copr instructions.

Wed Dec 15 15:12:42 1993  Ken Raeburn  (raeburn@cujo.cygnus.com)

	* i386.h (push): Permit Imm16 operand too.

Sat Dec 11 16:14:06 1993  Steve Chamberlain  (sac@thepub.cygnus.com)

	*  h8300.h (andc): Exists in base arch.

Wed Dec  1 12:15:32 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)

	* From Hisashi MINAMINO <minamino@sramhc.sra.co.jp>
	* hppa.h: #undef NONE to avoid conflict with hiux include files.

Sun Nov 21 22:06:57 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)

	* hppa.h: Add FP quadword store instructions.

Wed Nov 17 17:13:16 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* mips.h: (M_J_A): Added.
	(M_LA): Removed.

Mon Nov  8 12:12:47 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* mips.h (OP_MASK_CACHE, OP_SH_CACHE): Define.  From Ted Lemon
	<mellon@pepper.ncd.com>.

Sun Nov  7 00:30:11 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)

	* hppa.h: Immediate field in probei instructions is unsigned,
	not low-sign extended.

Wed Nov  3 10:30:00 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* m88k.h (RRI10MASK): Change from 0xfc00ffe0 to 0xfc00fc00.

Tue Nov  2 12:41:30 1993  Ken Raeburn  (raeburn@rover.cygnus.com)

	* i386.h: Add "fxch" without operand.

Mon Nov  1 18:13:03 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* mips.h (M_JAL_1, M_JAL_2, M_JAL_A): Added.

Sat Oct  2 22:26:11 1993  Jeffrey A Law  (law@snake.cs.utah.edu)

	* hppa.h: Add gfw and gfr to the opcode table.

Wed Sep 29 16:23:00 1993  K. Richard Pixley  (rich@sendai.cygnus.com)

	* m88k.h: extended to handle m88110.

Tue Sep 28 19:19:08 1993  Jeffrey A Law  (law@snake.cs.utah.edu)

	* hppa.h (be, ble): Use operand type 'z' to denote absolute branch
	addresses.

Tue Sep 14 14:04:35 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* i960.h (i960_opcodes): Properly bracket initializers.

Mon Sep 13 12:50:52 1993  K. Richard Pixley  (rich@sendai.cygnus.com)

	* m88k.h (BOFLAG): rewrite to avoid nested comment.

Mon Sep 13 15:46:06 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* m68k.h (two): Protect second argument with parentheses.

Fri Sep 10 16:29:47 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)

	* i386.h (i386_optab): Added new instruction "rsm" (for i386sl).
	Deleted old in/out instructions in "#if 0" section.

Thu Sep  9 17:42:19 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* i386.h (i386_optab): Properly bracket initializers.

Wed Aug 25 13:50:56 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)

	* hppa.h (pa_opcode): Use '|' for movb and movib insns.  (From
	Jeff Law, law@cs.utah.edu).

Mon Aug 23 16:55:03 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)

	* i386.h (lcall): Accept Imm32 operand also.

Mon Aug 23 12:43:11 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* mips.h (M_ABSU): Removed (absolute value of unsigned number??).
	(M_DABS): Added.

Thu Aug 19 15:08:37 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* mips.h (INSN_*): Changed values.  Removed unused definitions.
	Added INSN_COND_BRANCH_LIKELY, INSN_ISA2 and INSN_ISA3.  Split
	INSN_LOAD_DELAY into INSN_LOAD_MEMORY_DELAY and
	INSN_LOAD_COPROC_DELAY.  Split INSN_COPROC_DELAY into
	INSN_COPROC_MOVE_DELAY and INSN_COPROC_MEMORY_DELAY.
	(M_*): Added new values for r6000 and r4000 macros.
	(ANY_DELAY): Removed.

Wed Aug 18 15:37:48 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* mips.h: Added M_LI_S and M_LI_SS.

Tue Aug 17 07:08:08 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)

	* h8300.h: Get some rare mov.bs correct.

Thu Aug  5 09:15:17 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* sparc.h: Don't define const ourself; rely on ansidecl.h having
	been included.

Fri Jul 30 18:41:11 1993  John Gilmore  (gnu@cygnus.com)

	* sparc.h (F_JSR, F_UNBR, F_CONDBR):  Add new flags to mark
	jump instructions, for use in disassemblers.

Thu Jul 22 07:25:27 1993  Ian Lance Taylor  (ian@cygnus.com)

	* m88k.h: Make bitfields just unsigned, not unsigned long or
	unsigned short.

Wed Jul 21 11:55:31 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)

	* hppa.h: New argument type 'y'.  Use in various float instructions.

Mon Jul 19 17:17:03 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)

	* hppa.h (break): First immediate field is unsigned.

	* hppa.h: Add rfir instruction.

Sun Jul 18 16:28:08 1993  Jim Kingdon  (kingdon@rtl.cygnus.com)

	* mips.h: Split the actual table out into ../../opcodes/mips-opc.c.

Fri Jul 16 09:59:29 1993  Ian Lance Taylor  (ian@cygnus.com)

	* mips.h: Reworked the hazard information somewhat, and fixed some
	bugs in the instruction hazard descriptions.

Thu Jul 15 12:42:01 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* m88k.h: Corrected a couple of opcodes.

Tue Jul  6 15:17:35 1993  Ian Lance Taylor  (ian@cygnus.com)

	* mips.h: Replaced with version from Ralph Campbell and OSF.  The
	new version includes instruction hazard information, but is
	otherwise reasonably similar.

Thu Jul  1 20:36:17 1993  Doug Evans  (dje@canuck.cygnus.com)

	* h8300.h: Fix typo in UNOP3 (affected sh[al][lr].l).

Fri Jun 11 18:38:44 1993  Ken Raeburn  (raeburn@cygnus.com)

	Patches from Jeff Law, law@cs.utah.edu:
	* hppa.h: Clean up some of the OLD_TABLE, non-OLD_TABLE braindamage.
	Make the tables be the same for the following instructions:
	"bb", "addb[tf]", "addib[tf]", "add", "add[loc]", "addco",
	"sh[123]add", "sh[123]add[lo]", "sub", "sub[obt]", "sub[bt]o",
	"ds", "comclr", "addi", "addi[ot]", "addito", "subi", "subio",
	"comiclr", "fadd", "fsub", "fmpy", "fdiv", "fsqrt", "fabs",
	"frnd", "fcpy", "fcnvff", "fcnvxf", "fcnvfx", "fcnvfxt",
	"fcmp", and "ftest".

	* hppa.h: Make new and old tables the same for "break", "mtctl",
	"mfctl", "bb", "ssm", "rsm", "xmpyu", "fmpyadd", "fmpysub".
	Fix typo in last patch.  Collapse several #ifdefs into a
	single #ifdef.

	* hppa.h: Delete remaining OLD_TABLE code.  Bring some
	of the comments up-to-date.

	* hppa.h: Update "free list" of letters and update
	comments describing each letter's function.

Fri Jun  4 15:41:37 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)

	* h8300.h: checkpoint, includes H8/300-H opcodes.

Thu Jun  3 15:42:59 1993  Stu Grossman  (grossman@cygnus.com)

	* Patches from Jeffrey Law <law@cs.utah.edu>.
	* hppa.h: Rework single precision FP
	instructions so that they correctly disassemble code
	PA1.1 code.

Thu May 27 19:21:22 1993  Bruce Bauman  (boot@osf.org)

	* i386.h (i386_optab, mov pattern): Remove Mem16 restriction from
	mov to allow instructions like mov ss,xyz(ecx) to assemble.

Tue May 25 00:39:40 1993  Ken Raeburn  (raeburn@cygnus.com)

	* hppa.h: Use new version from Utah if OLD_TABLE isn't defined;
	gdb will define it for now.

Mon May 24 15:20:06 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)

	* sparc.h: Don't end enumerator list with comma.

Fri May 14 15:15:50 1993  Ian Lance Taylor  (ian@cygnus.com)

	* Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
	* mips.h (OP_MASK_COPZ, OP_SH_COPZ): Define.
	("bc2t"): Correct typo.
	("[ls]wc[023]"): Use T rather than t.
	("c[0123]"): Define general coprocessor instructions.

Mon May 10 06:02:25 1993  Ken Raeburn  (raeburn@kr-pc.cygnus.com)

	* m68k.h: Move split point for gcc compilation more towards
	middle.

Fri Apr  9 13:26:16 1993  Jim Kingdon  (kingdon@cygnus.com)

	* rs6k.h: Clean up instructions for primary opcode 19 (many were
	simply wrong, ics, rfi, & rfsvc were missing).
	Add "a" to opr_ext for "bb".  Doc fix.

Thu Mar 18 13:45:31 1993  Per Bothner  (bothner@rtl.cygnus.com)

	* i386.h:  486 extensions from John Hassey (hassey@dg-rtp.dg.com).
	* mips.h:  Add casts, to suppress warnings about shifting too much.
	* m68k.h:  Document the placement code '9'.

Thu Feb 18 02:03:14 1993  John Gilmore  (gnu@cygnus.com)

	* m68k.h (BREAK_UP_BIG_DECL, AND_OTHER_PART):  Add kludge which
	allows callers to break up the large initialized struct full of
	opcodes into two half-sized ones.  This permits GCC to compile
	this module, since it takes exponential space for initializers.
	(numopcodes, endop):  Revise to use AND_OTHER_PART in size calcs.

Thu Feb  4 02:06:56 1993  John Gilmore  (gnu@cygnus.com)

	* a29k.h:  Remove RCS crud, update GPL to v2, update copyrights.
	* convex.h:  Added, from GDB's convx-opcode.h.  Added CONST to all
	initialized structs in it.

Thu Jan 28 21:32:22 1993  John Gilmore  (gnu@cygnus.com)

	Delta 88 changes inspired by Carl Greco, <cgreco@Creighton.Edu>:
	* m88k.h (PMEM):  Avoid previous definition from <sys/param.h>.
	(AND):  Change to AND_ to avoid ansidecl.h `AND' conflict.

Sat Jan 23 18:10:49 PST 1993  Ralph Campbell  (ralphc@pyramid.com)

	* mips.h: document "i" and "j" operands correctly.

Thu Jan  7 15:58:13 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* mips.h: Removed endianness dependency.

Sun Jan  3 14:13:35 1993  Steve Chamberlain  (sac@thepub.cygnus.com)

	* h8300.h: include info on number of cycles per instruction.

Mon Dec 21 21:29:08 1992  Stu Grossman  (grossman at cygnus.com)

	* hppa.h:  Move handy aliases to the front.  Fix masks for extract
	and deposit instructions.

Sat Dec 12 16:09:48 1992  Ian Lance Taylor  (ian@cygnus.com)

	* i386.h: accept shld and shrd both with and without the shift
	count argument, which is always %cl.

Fri Nov 27 17:13:18 1992  Ken Raeburn  (raeburn at cygnus.com)

	* i386.h (i386_optab_end, i386_regtab_end): Now const.
	(one_byte_segment_defaults, two_byte_segment_defaults,
	i386_prefixtab_end): Ditto.

Mon Nov 23 10:47:25 1992  Ken Raeburn  (raeburn@cygnus.com)

	* vax.h (bb*): Use "v" (bitfield type), not "a" (address operand)
	for operand 2; from John Carr, jfc@dsg.dec.com.

Wed Nov  4 07:36:49 1992  Ken Raeburn  (raeburn@cygnus.com)

	* m68k.h: Define FIXED_SIZE_BRANCH, so bsr and bra instructions
	always use 16-bit offsets.  Makes calculated-size jump tables
	feasible.

Fri Oct 16 22:52:43 1992  Ken Raeburn  (raeburn@cygnus.com)

	* i386.h: Fix one-operand forms of in* and out* patterns.

Tue Sep 22 14:08:14 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)

	* m68k.h: Added CPU32 support.

Tue Sep 22 00:38:41 1992  John Gilmore  (gnu@cygnus.com)

	* mips.h (break):  Disassemble the argument.  Patch from
	jonathan@cs.stanford.edu (Jonathan Stone).

Wed Sep  9 11:25:28 1992  Ian Lance Taylor  (ian@cygnus.com)

	* m68k.h: merged Motorola and MIT syntax.

Thu Sep  3 09:33:22 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

	* m68k.h (pmove): make the tests less strict, the 68k book is
	wrong.

Tue Aug 25 23:25:19 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)

	* m68k.h (m68ec030): Defined as alias for 68030.
	(m68k_opcodes): New type characters "3" for 68030 MMU regs and "t"
	for immediate 0-7 added.  Set up some opcodes (ptest, bkpt) to use
	them.  Tightened description of "fmovex" to distinguish it from
	some "pmove" encodings.  Added "pmove" for 68030 MMU regs, cleaned
	up descriptions that claimed versions were available for chips not
	supporting them.  Added "pmovefd".

Mon Aug 24 12:04:51 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

	* m68k.h: fix where the . goes in divull

Wed Aug 19 11:22:24 1992  Ian Lance Taylor  (ian@cygnus.com)

	* m68k.h: the cas2 instruction is supposed to be written with
	indirection on the last two operands, which can be either data or
	address registers.  Added a new operand type 'r' which accepts
	either register type.  Added new cases for cas2l and cas2w which
	use them.  Corrected masks for cas2 which failed to recognize use
	of address register.

Fri Aug 14 14:20:38 1992  Per Bothner  (bothner@cygnus.com)

	* m68k.h:  Merged in patches (mostly m68040-specific) from
	Colin Smith <colin@wrs.com>.

	* m68k.h:  Merged m68kmri.h and m68k.h (using the former as a
	base).  Also cleaned up duplicates, re-ordered instructions for
	the sake of dis-assembling (so aliases come after standard names).
	* m68kmri.h: Now just defines some macros, and #includes m68k.h.

Wed Aug 12 16:38:15 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

	* m68kmri.h: added various opcodes. Moved jbxx to bxxes. Filled in
	all missing .s

Mon Aug 10 23:22:33 1992  Ken Raeburn  (raeburn@cygnus.com)

	* sparc.h: Moved tables to BFD library.

	* i386.h (i386_optab): Add fildq, fistpq aliases used by gcc.

Sun Jun 28 13:29:03 1992  Fred Fish  (fnf@cygnus.com)

	* h8300.h:  Finish filling in all the holes in the opcode table,
	so that the Lucid C compiler can digest this as well...

Fri Jun 26 21:27:17 1992  John Gilmore  (gnu at cygnus.com)

	* i386.h:  Add setc, setnc, addr16, data16, repz, repnz aliases.
	Fix opcodes on various sizes of fild/fist instructions
	(16bit=no suffix, 32bit="l" suffix, 64bit="ll" suffix).
	Use tabs to indent for comments.  Fixes suggested by Minh Tran-Le.

Thu Jun 25 16:13:26 1992  Stu Grossman  (grossman at cygnus.com)

	* h8300.h:  Fill in all the holes in the opcode table so that the
	losing HPUX C compiler can digest this...

Thu Jun 11 12:15:25 1992  John Gilmore  (gnu at cygnus.com)

	* mips.h:  Fix decoding of coprocessor instructions, somewhat.
	(Fix by Eric Anderson, 3jean@maas-neotek.arc.nasa.gov.)

Thu May 28 11:17:44 1992  Jim Wilson  (wilson@sphagnum.cygnus.com)

	* sparc.h: Add new architecture variant sparclite; add its scan
	and divscc opcodes.  Define ARCHITECTURES_CONFLICT_P macro.

Tue May  5 14:23:27 1992  Per Bothner  (bothner@rtl.cygnus.com)

	* mips.h:  Add some more opcode synonyms (from Frank Yellin,
	fy@lucid.com).

Thu Apr 16 18:25:26 1992  Per Bothner  (bothner@cygnus.com)

	* rs6k.h:  New version from IBM (Metin).

Thu Apr  9 00:31:19 1992  Per Bothner  (bothner@rtl.cygnus.com)

	* rs6k.h: Fix incorrect extended opcode for instructions `fm'
        and `fd'.  (From metin@ibmpa.awdpa.ibm.com (Metin G. Ozisik).)

Tue Apr  7 13:38:47 1992  Stu Grossman  (grossman at cygnus.com)

	* rs6k.h:  Move from ../../gdb/rs6k-opcode.h.

Fri Apr  3 11:30:20 1992  Fred Fish  (fnf@cygnus.com)

	* m68k.h (one, two):  Cast macro args to unsigned to suppress
	complaints from compiler and lint about integer overflow during
	shift.

Sun Mar 29 12:22:08 1992  John Gilmore  (gnu at cygnus.com)

	* sparc.h (OP):  Avoid signed overflow when shifting to high order bit.

Fri Mar  6 00:22:38 1992  John Gilmore  (gnu at cygnus.com)

	* mips.h:  Make bitfield layout depend on the HOST compiler,
	not on the TARGET system.

Fri Feb 21 01:29:51 1992  K. Richard Pixley  (rich@cygnus.com)

	* i386.h: added inb, inw, outb, outw opcodes, added att syntax for
	  scmp, slod, smov, ssca, ssto.  Curtesy Minh Tran-Le
	  <TRANLE@INTELLICORP.COM>.

Thu Jan 30 07:31:44 1992  Steve Chamberlain  (sac at rtl.cygnus.com)

	* h8300.h: turned op_type enum into #define list

Thu Jan 30 01:07:24 1992  John Gilmore  (gnu at cygnus.com)

	* sparc.h:  Remove "cypress" architecture.  Remove "fitox" and
	similar instructions -- they've been renamed to "fitoq", etc.
	REALLY fix tsubcctv.  Fix "fcmpeq" and "fcmpq" which had wrong
	number of arguments.
	* h8300.h:  Remove extra ; which produces compiler warning.

Tue Jan 28 22:59:22 1992  Stu Grossman  (grossman at cygnus.com)

	* sparc.h:  fix opcode for tsubcctv.

Tue Jan  7 17:19:39 1992  K. Richard Pixley  (rich at cygnus.com)

	* sparc.h: fba and cba are now aliases for fb and cb respectively.

Fri Dec 27 10:55:50 1991  Per Bothner  (bothner at cygnus.com)

	* sparc.h (nop):  Made the 'lose' field be even tighter,
	so only a standard 'nop' is disassembled as a nop.

Sun Dec 22 12:18:18 1991  Michael Tiemann  (tiemann at cygnus.com)

	* sparc.h (nop): Add RD_GO to `lose' so that only %g0 in dest is
	disassembled as a nop.

Tue Dec 10 00:22:20 1991  K. Richard Pixley  (rich at rtl.cygnus.com)

	* sparc.h: fix a typo.

Sat Nov 30 20:40:51 1991  Steve Chamberlain  (sac at rtl.cygnus.com)

	* a29k.h, arm.h, h8300.h,  i386.h,  i860.h, i960.h , m68k.h,
	m88k.h, mips.h , np1.h, ns32k.h, pn.h, pyr.h, sparc.h, tahoe.h,
	vax.h, ChangeLog: renamed from ../<foo>-opcode.h

\f
Local Variables:
version-control: never
End: