Commit | Line | Data |
---|---|---|
252b5132 | 1 | /* Opcode table header for m680[01234]0/m6888[12]/m68851. |
3e602632 | 2 | Copyright 1989, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1999, 2001, |
fd99574b | 3 | 2003, 2004 Free Software Foundation, Inc. |
252b5132 | 4 | |
3e602632 | 5 | This file is part of GDB, GAS, and the GNU binutils. |
252b5132 | 6 | |
3e602632 NC |
7 | GDB, GAS, and the GNU binutils are free software; you can redistribute |
8 | them and/or modify them under the terms of the GNU General Public | |
9 | License as published by the Free Software Foundation; either version | |
10 | 1, or (at your option) any later version. | |
252b5132 | 11 | |
3e602632 NC |
12 | GDB, GAS, and the GNU binutils are distributed in the hope that they |
13 | will be useful, but WITHOUT ANY WARRANTY; without even the implied | |
14 | warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See | |
15 | the GNU General Public License for more details. | |
252b5132 | 16 | |
3e602632 NC |
17 | You should have received a copy of the GNU General Public License |
18 | along with this file; see the file COPYING. If not, write to the Free | |
19 | Software Foundation, 59 Temple Place - Suite 330, Boston, MA | |
20 | 02111-1307, USA. */ | |
252b5132 RH |
21 | |
22 | /* These are used as bit flags for the arch field in the m68k_opcode | |
23 | structure. */ | |
24 | #define _m68k_undef 0 | |
3e602632 NC |
25 | #define m68000 0x001 |
26 | #define m68008 m68000 /* Synonym for -m68000. otherwise unused. */ | |
27 | #define m68010 0x002 | |
28 | #define m68020 0x004 | |
29 | #define m68030 0x008 | |
30 | #define m68ec030 m68030 /* Similar enough to -m68030 to ignore differences; | |
252b5132 | 31 | gas will deal with the few differences. */ |
3e602632 NC |
32 | #define m68040 0x010 |
33 | /* There is no 68050. */ | |
34 | #define m68060 0x020 | |
35 | #define m68881 0x040 | |
36 | #define m68882 m68881 /* Synonym for -m68881. otherwise unused. */ | |
37 | #define m68851 0x080 | |
6b6e92f4 NC |
38 | #define cpu32 0x100 /* e.g., 68332 */ |
39 | ||
40 | #define mcfmac 0x200 /* ColdFire MAC. */ | |
41 | #define mcfemac 0x400 /* ColdFire EMAC. */ | |
42 | #define cfloat 0x800 /* ColdFire FPU. */ | |
43 | #define mcfhwdiv 0x1000 /* ColdFire hardware divide. */ | |
44 | ||
45 | #define mcfisa_a 0x2000 /* ColdFire ISA_A. */ | |
46 | #define mcfisa_aa 0x4000 /* ColdFire ISA_A+. */ | |
47 | #define mcfisa_b 0x8000 /* ColdFire ISA_B. */ | |
48 | #define mcfusp 0x10000 /* ColdFire USP instructions. */ | |
49 | ||
50 | #define mcf5200 0x20000 | |
51 | #define mcf5206e 0x40000 | |
52 | #define mcf521x 0x80000 | |
53 | #define mcf5249 0x100000 | |
54 | #define mcf528x 0x200000 | |
55 | #define mcf5307 0x400000 | |
56 | #define mcf5407 0x800000 | |
57 | #define mcf5470 0x1000000 | |
58 | #define mcf5480 0x2000000 | |
3e602632 NC |
59 | |
60 | /* Handy aliases. */ | |
61 | #define m68040up (m68040 | m68060) | |
62 | #define m68030up (m68030 | m68040up) | |
63 | #define m68020up (m68020 | m68030up) | |
64 | #define m68010up (m68010 | cpu32 | m68020up) | |
65 | #define m68000up (m68000 | m68010up) | |
3e602632 | 66 | |
252b5132 RH |
67 | #define mfloat (m68881 | m68882 | m68040 | m68060) |
68 | #define mmmu (m68851 | m68030 | m68040 | m68060) | |
69 | ||
70 | /* The structure used to hold information for an opcode. */ | |
71 | ||
72 | struct m68k_opcode | |
73 | { | |
74 | /* The opcode name. */ | |
75 | const char *name; | |
be8c092b NC |
76 | /* The pseudo-size of the instruction(in bytes). Used to determine |
77 | number of bytes necessary to disassemble the instruction. */ | |
78 | unsigned int size; | |
252b5132 RH |
79 | /* The opcode itself. */ |
80 | unsigned long opcode; | |
81 | /* The mask used by the disassembler. */ | |
82 | unsigned long match; | |
83 | /* The arguments. */ | |
84 | const char *args; | |
85 | /* The architectures which support this opcode. */ | |
86 | unsigned int arch; | |
87 | }; | |
88 | ||
89 | /* The structure used to hold information for an opcode alias. */ | |
90 | ||
91 | struct m68k_opcode_alias | |
92 | { | |
93 | /* The alias name. */ | |
94 | const char *alias; | |
95 | /* The instruction for which this is an alias. */ | |
96 | const char *primary; | |
97 | }; | |
98 | ||
99 | /* We store four bytes of opcode for all opcodes because that is the | |
100 | most any of them need. The actual length of an instruction is | |
101 | always at least 2 bytes, and is as much longer as necessary to hold | |
102 | the operands it has. | |
103 | ||
104 | The match field is a mask saying which bits must match particular | |
105 | opcode in order for an instruction to be an instance of that | |
106 | opcode. | |
107 | ||
108 | The args field is a string containing two characters for each | |
109 | operand of the instruction. The first specifies the kind of | |
110 | operand; the second, the place it is stored. */ | |
111 | ||
112 | /* Kinds of operands: | |
fd99574b | 113 | Characters used: AaBbCcDdEeFfGgHIiJkLlMmnOopQqRrSsTtU VvWwXxYyZz01234|*~%;@!&$?/<>#^+- |
252b5132 RH |
114 | |
115 | D data register only. Stored as 3 bits. | |
116 | A address register only. Stored as 3 bits. | |
117 | a address register indirect only. Stored as 3 bits. | |
118 | R either kind of register. Stored as 4 bits. | |
119 | r either kind of register indirect only. Stored as 4 bits. | |
120 | At the moment, used only for cas2 instruction. | |
121 | F floating point coprocessor register only. Stored as 3 bits. | |
122 | O an offset (or width): immediate data 0-31 or data register. | |
123 | Stored as 6 bits in special format for BF... insns. | |
124 | + autoincrement only. Stored as 3 bits (number of the address register). | |
125 | - autodecrement only. Stored as 3 bits (number of the address register). | |
126 | Q quick immediate data. Stored as 3 bits. | |
127 | This matches an immediate operand only when value is in range 1 .. 8. | |
128 | M moveq immediate data. Stored as 8 bits. | |
129 | This matches an immediate operand only when value is in range -128..127 | |
130 | T trap vector immediate data. Stored as 4 bits. | |
131 | ||
132 | k K-factor for fmove.p instruction. Stored as a 7-bit constant or | |
133 | a three bit register offset, depending on the field type. | |
134 | ||
135 | # immediate data. Stored in special places (b, w or l) | |
136 | which say how many bits to store. | |
137 | ^ immediate data for floating point instructions. Special places | |
138 | are offset by 2 bytes from '#'... | |
139 | B pc-relative address, converted to an offset | |
140 | that is treated as immediate data. | |
141 | d displacement and register. Stores the register as 3 bits | |
142 | and stores the displacement in the entire second word. | |
143 | ||
144 | C the CCR. No need to store it; this is just for filtering validity. | |
145 | S the SR. No need to store, just as with CCR. | |
146 | U the USP. No need to store, just as with CCR. | |
fd99574b NC |
147 | E the MAC ACC. No need to store, just as with CCR. |
148 | e the EMAC ACC[0123]. | |
149 | G the MAC/EMAC MACSR. No need to store, just as with CCR. | |
150 | g the EMAC ACCEXT{01,23}. | |
1fca749b | 151 | H the MASK. No need to store, just as with CCR. |
fd99574b | 152 | i the MAC/EMAC scale factor. |
252b5132 RH |
153 | |
154 | I Coprocessor ID. Not printed if 1. The Coprocessor ID is always | |
155 | extracted from the 'd' field of word one, which means that an extended | |
156 | coprocessor opcode can be skipped using the 'i' place, if needed. | |
157 | ||
158 | s System Control register for the floating point coprocessor. | |
159 | ||
160 | J Misc register for movec instruction, stored in 'j' format. | |
161 | Possible values: | |
162 | 0x000 SFC Source Function Code reg [60, 40, 30, 20, 10] | |
163 | 0x001 DFC Data Function Code reg [60, 40, 30, 20, 10] | |
3e602632 | 164 | 0x002 CACR Cache Control Register [60, 40, 30, 20, mcf] |
252b5132 RH |
165 | 0x003 TC MMU Translation Control [60, 40] |
166 | 0x004 ITT0 Instruction Transparent | |
167 | Translation reg 0 [60, 40] | |
168 | 0x005 ITT1 Instruction Transparent | |
169 | Translation reg 1 [60, 40] | |
170 | 0x006 DTT0 Data Transparent | |
171 | Translation reg 0 [60, 40] | |
172 | 0x007 DTT1 Data Transparent | |
173 | Translation reg 1 [60, 40] | |
174 | 0x008 BUSCR Bus Control Register [60] | |
175 | 0x800 USP User Stack Pointer [60, 40, 30, 20, 10] | |
3e602632 | 176 | 0x801 VBR Vector Base reg [60, 40, 30, 20, 10, mcf] |
252b5132 RH |
177 | 0x802 CAAR Cache Address Register [ 30, 20] |
178 | 0x803 MSP Master Stack Pointer [ 40, 30, 20] | |
179 | 0x804 ISP Interrupt Stack Pointer [ 40, 30, 20] | |
180 | 0x805 MMUSR MMU Status reg [ 40] | |
181 | 0x806 URP User Root Pointer [60, 40] | |
182 | 0x807 SRP Supervisor Root Pointer [60, 40] | |
183 | 0x808 PCR Processor Configuration reg [60] | |
184 | 0xC00 ROMBAR ROM Base Address Register [520X] | |
185 | 0xC04 RAMBAR0 RAM Base Address Register 0 [520X] | |
186 | 0xC05 RAMBAR1 RAM Base Address Register 0 [520X] | |
187 | 0xC0F MBAR0 RAM Base Address Register 0 [520X] | |
3e602632 NC |
188 | 0xC04 FLASHBAR FLASH Base Address Register [mcf528x] |
189 | 0xC05 RAMBAR Static RAM Base Address Register [mcf528x] | |
252b5132 RH |
190 | |
191 | L Register list of the type d0-d7/a0-a7 etc. | |
192 | (New! Improved! Can also hold fp0-fp7, as well!) | |
193 | The assembler tries to see if the registers match the insn by | |
194 | looking at where the insn wants them stored. | |
195 | ||
196 | l Register list like L, but with all the bits reversed. | |
197 | Used for going the other way. . . | |
198 | ||
199 | c cache identifier which may be "nc" for no cache, "ic" | |
200 | for instruction cache, "dc" for data cache, or "bc" | |
201 | for both caches. Used in cinv and cpush. Always | |
202 | stored in position "d". | |
203 | ||
1fca749b ILT |
204 | u Any register, with ``upper'' or ``lower'' specification. Used |
205 | in the mac instructions with size word. | |
206 | ||
252b5132 RH |
207 | The remainder are all stored as 6 bits using an address mode and a |
208 | register number; they differ in which addressing modes they match. | |
209 | ||
210 | * all (modes 0-6,7.0-4) | |
211 | ~ alterable memory (modes 2-6,7.0,7.1) | |
212 | (not 0,1,7.2-4) | |
213 | % alterable (modes 0-6,7.0,7.1) | |
214 | (not 7.2-4) | |
215 | ; data (modes 0,2-6,7.0-4) | |
216 | (not 1) | |
217 | @ data, but not immediate (modes 0,2-6,7.0-3) | |
218 | (not 1,7.4) | |
219 | ! control (modes 2,5,6,7.0-3) | |
220 | (not 0,1,3,4,7.4) | |
221 | & alterable control (modes 2,5,6,7.0,7.1) | |
8577e690 | 222 | (not 0,1,3,4,7.2-4) |
252b5132 RH |
223 | $ alterable data (modes 0,2-6,7.0,7.1) |
224 | (not 1,7.2-4) | |
225 | ? alterable control, or data register (modes 0,2,5,6,7.0,7.1) | |
226 | (not 1,3,4,7.2-4) | |
227 | / control, or data register (modes 0,2,5,6,7.0-3) | |
228 | (not 1,3,4,7.4) | |
229 | > *save operands (modes 2,4,5,6,7.0,7.1) | |
230 | (not 0,1,3,7.2-4) | |
231 | < *restore operands (modes 2,3,5,6,7.0-3) | |
232 | (not 0,1,4,7.4) | |
233 | ||
234 | coldfire move operands: | |
235 | m (modes 0-4) | |
236 | n (modes 5,7.2) | |
237 | o (modes 6,7.0,7.1,7.3,7.4) | |
238 | p (modes 0-5) | |
239 | ||
240 | coldfire bset/bclr/btst/mulsl/mulul operands: | |
241 | q (modes 0,2-5) | |
242 | v (modes 0,2-5,7.0,7.1) | |
3e602632 NC |
243 | b (modes 0,2-5,7.2) |
244 | w (modes 2-5,7.2) | |
245 | y (modes 2,5) | |
246 | z (modes 2,5,7.2) | |
fd99574b NC |
247 | x mov3q immediate operand. |
248 | 4 (modes 2,3,4,5) | |
249 | */ | |
3e602632 NC |
250 | |
251 | /* For the 68851: */ | |
252 | /* I didn't use much imagination in choosing the | |
252b5132 RH |
253 | following codes, so many of them aren't very |
254 | mnemonic. -rab | |
255 | ||
256 | 0 32 bit pmmu register | |
257 | Possible values: | |
258 | 000 TC Translation Control Register (68030, 68851) | |
259 | ||
260 | 1 16 bit pmmu register | |
261 | 111 AC Access Control (68851) | |
262 | ||
263 | 2 8 bit pmmu register | |
264 | 100 CAL Current Access Level (68851) | |
265 | 101 VAL Validate Access Level (68851) | |
266 | 110 SCC Stack Change Control (68851) | |
267 | ||
268 | 3 68030-only pmmu registers (32 bit) | |
269 | 010 TT0 Transparent Translation reg 0 | |
270 | (aka Access Control reg 0 -- AC0 -- on 68ec030) | |
271 | 011 TT1 Transparent Translation reg 1 | |
272 | (aka Access Control reg 1 -- AC1 -- on 68ec030) | |
273 | ||
274 | W wide pmmu registers | |
275 | Possible values: | |
276 | 001 DRP Dma Root Pointer (68851) | |
277 | 010 SRP Supervisor Root Pointer (68030, 68851) | |
278 | 011 CRP Cpu Root Pointer (68030, 68851) | |
279 | ||
280 | f function code register (68030, 68851) | |
281 | 0 SFC | |
282 | 1 DFC | |
283 | ||
284 | V VAL register only (68851) | |
285 | ||
286 | X BADx, BACx (16 bit) | |
287 | 100 BAD Breakpoint Acknowledge Data (68851) | |
288 | 101 BAC Breakpoint Acknowledge Control (68851) | |
289 | ||
290 | Y PSR (68851) (MMUSR on 68030) (ACUSR on 68ec030) | |
291 | Z PCSR (68851) | |
292 | ||
293 | | memory (modes 2-6, 7.*) | |
294 | ||
295 | t address test level (68030 only) | |
296 | Stored as 3 bits, range 0-7. | |
297 | Also used for breakpoint instruction now. | |
298 | ||
299 | */ | |
300 | ||
301 | /* Places to put an operand, for non-general operands: | |
fd99574b | 302 | Characters used: BbCcDdFfGgHhIijkLlMmNnostWw123456789/ |
1fca749b | 303 | |
252b5132 RH |
304 | s source, low bits of first word. |
305 | d dest, shifted 9 in first word | |
306 | 1 second word, shifted 12 | |
307 | 2 second word, shifted 6 | |
308 | 3 second word, shifted 0 | |
309 | 4 third word, shifted 12 | |
310 | 5 third word, shifted 6 | |
311 | 6 third word, shifted 0 | |
312 | 7 second word, shifted 7 | |
313 | 8 second word, shifted 10 | |
314 | 9 second word, shifted 5 | |
315 | D store in both place 1 and place 3; for divul and divsl. | |
316 | B first word, low byte, for branch displacements | |
317 | W second word (entire), for branch displacements | |
318 | L second and third words (entire), for branch displacements | |
319 | (also overloaded for move16) | |
320 | b second word, low byte | |
321 | w second word (entire) [variable word/long branch offset for dbra] | |
322 | W second word (entire) (must be signed 16 bit value) | |
323 | l second and third word (entire) | |
324 | g variable branch offset for bra and similar instructions. | |
325 | The place to store depends on the magnitude of offset. | |
326 | t store in both place 7 and place 8; for floating point operations | |
327 | c branch offset for cpBcc operations. | |
328 | The place to store is word two if bit six of word one is zero, | |
329 | and words two and three if bit six of word one is one. | |
330 | i Increment by two, to skip over coprocessor extended operands. Only | |
331 | works with the 'I' format. | |
332 | k Dynamic K-factor field. Bits 6-4 of word 2, used as a register number. | |
333 | Also used for dynamic fmovem instruction. | |
334 | C floating point coprocessor constant - 7 bits. Also used for static | |
335 | K-factors... | |
336 | j Movec register #, stored in 12 low bits of second word. | |
1fca749b ILT |
337 | m For M[S]ACx; 4 bits split with MSB shifted 6 bits in first word |
338 | and remaining 3 bits of register shifted 9 bits in first word. | |
339 | Indicate upper/lower in 1 bit shifted 7 bits in second word. | |
340 | Use with `R' or `u' format. | |
341 | n `m' withouth upper/lower indication. (For M[S]ACx; 4 bits split | |
342 | with MSB shifted 6 bits in first word and remaining 3 bits of | |
343 | register shifted 9 bits in first word. No upper/lower | |
344 | indication is done.) Use with `R' or `u' format. | |
345 | o For M[S]ACw; 4 bits shifted 12 in second word (like `1'). | |
346 | Indicate upper/lower in 1 bit shifted 7 bits in second word. | |
347 | Use with `R' or `u' format. | |
348 | M For M[S]ACw; 4 bits in low bits of first word. Indicate | |
349 | upper/lower in 1 bit shifted 6 bits in second word. Use with | |
350 | `R' or `u' format. | |
351 | N For M[S]ACw; 4 bits in low bits of second word. Indicate | |
352 | upper/lower in 1 bit shifted 6 bits in second word. Use with | |
353 | `R' or `u' format. | |
354 | h shift indicator (scale factor), 1 bit shifted 10 in second word | |
252b5132 RH |
355 | |
356 | Places to put operand, for general operands: | |
357 | d destination, shifted 6 bits in first word | |
358 | b source, at low bit of first word, and immediate uses one byte | |
359 | w source, at low bit of first word, and immediate uses two bytes | |
360 | l source, at low bit of first word, and immediate uses four bytes | |
361 | s source, at low bit of first word. | |
362 | Used sometimes in contexts where immediate is not allowed anyway. | |
363 | f single precision float, low bit of 1st word, immediate uses 4 bytes | |
364 | F double precision float, low bit of 1st word, immediate uses 8 bytes | |
365 | x extended precision float, low bit of 1st word, immediate uses 12 bytes | |
366 | p packed float, low bit of 1st word, immediate uses 12 bytes | |
fd99574b NC |
367 | G EMAC accumulator, load (bit 4 2nd word, !bit8 first word) |
368 | H EMAC accumulator, non load (bit 4 2nd word, bit 8 first word) | |
369 | F EMAC ACCx | |
370 | f EMAC ACCy | |
371 | I MAC/EMAC scale factor | |
372 | / Like 's', but set 2nd word, bit 5 if trailing_ampersand set | |
373 | ] first word, bit 10 | |
252b5132 RH |
374 | */ |
375 | ||
376 | extern const struct m68k_opcode m68k_opcodes[]; | |
377 | extern const struct m68k_opcode_alias m68k_opcode_aliases[]; | |
378 | ||
379 | extern const int m68k_numopcodes, m68k_numaliases; | |
380 | ||
381 | /* end of m68k-opcode.h */ |