Commit | Line | Data |
---|---|---|
252b5132 | 1 | /* Opcode table header for m680[01234]0/m6888[12]/m68851. |
4f1d9bd8 NC |
2 | Copyright 1989, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1999, 2001 |
3 | Free Software Foundation, Inc. | |
252b5132 RH |
4 | |
5 | This file is part of GDB, GAS, and the GNU binutils. | |
6 | ||
7 | GDB, GAS, and the GNU binutils are free software; you can redistribute | |
8 | them and/or modify them under the terms of the GNU General Public | |
9 | License as published by the Free Software Foundation; either version | |
10 | 1, or (at your option) any later version. | |
11 | ||
12 | GDB, GAS, and the GNU binutils are distributed in the hope that they | |
13 | will be useful, but WITHOUT ANY WARRANTY; without even the implied | |
14 | warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See | |
15 | the GNU General Public License for more details. | |
16 | ||
17 | You should have received a copy of the GNU General Public License | |
18 | along with this file; see the file COPYING. If not, write to the Free | |
19 | Software Foundation, 59 Temple Place - Suite 330, Boston, MA | |
20 | 02111-1307, USA. */ | |
21 | ||
22 | /* These are used as bit flags for the arch field in the m68k_opcode | |
23 | structure. */ | |
24 | #define _m68k_undef 0 | |
25 | #define m68000 0x001 | |
26 | #define m68008 m68000 /* synonym for -m68000. otherwise unused. */ | |
27 | #define m68010 0x002 | |
28 | #define m68020 0x004 | |
29 | #define m68030 0x008 | |
30 | #define m68ec030 m68030 /* similar enough to -m68030 to ignore differences; | |
31 | gas will deal with the few differences. */ | |
32 | #define m68040 0x010 | |
33 | /* there is no 68050 */ | |
34 | #define m68060 0x020 | |
35 | #define m68881 0x040 | |
36 | #define m68882 m68881 /* synonym for -m68881. otherwise unused. */ | |
37 | #define m68851 0x080 | |
38 | #define cpu32 0x100 /* e.g., 68332 */ | |
39 | #define mcf5200 0x200 | |
1fca749b ILT |
40 | #define mcf5206e 0x400 |
41 | #define mcf5307 0x800 | |
80a523c2 | 42 | #define mcf5407 0x1000 |
252b5132 RH |
43 | |
44 | /* handy aliases */ | |
45 | #define m68040up (m68040 | m68060) | |
46 | #define m68030up (m68030 | m68040up) | |
47 | #define m68020up (m68020 | m68030up) | |
48 | #define m68010up (m68010 | cpu32 | m68020up) | |
49 | #define m68000up (m68000 | m68010up) | |
80a523c2 NC |
50 | #define mcf (mcf5200 | mcf5206e | mcf5307 | mcf5407) |
51 | #define mcf5307up (mcf5307 | mcf5407) | |
252b5132 RH |
52 | |
53 | #define mfloat (m68881 | m68882 | m68040 | m68060) | |
54 | #define mmmu (m68851 | m68030 | m68040 | m68060) | |
55 | ||
56 | /* The structure used to hold information for an opcode. */ | |
57 | ||
58 | struct m68k_opcode | |
59 | { | |
60 | /* The opcode name. */ | |
61 | const char *name; | |
62 | /* The opcode itself. */ | |
63 | unsigned long opcode; | |
64 | /* The mask used by the disassembler. */ | |
65 | unsigned long match; | |
66 | /* The arguments. */ | |
67 | const char *args; | |
68 | /* The architectures which support this opcode. */ | |
69 | unsigned int arch; | |
70 | }; | |
71 | ||
72 | /* The structure used to hold information for an opcode alias. */ | |
73 | ||
74 | struct m68k_opcode_alias | |
75 | { | |
76 | /* The alias name. */ | |
77 | const char *alias; | |
78 | /* The instruction for which this is an alias. */ | |
79 | const char *primary; | |
80 | }; | |
81 | ||
82 | /* We store four bytes of opcode for all opcodes because that is the | |
83 | most any of them need. The actual length of an instruction is | |
84 | always at least 2 bytes, and is as much longer as necessary to hold | |
85 | the operands it has. | |
86 | ||
87 | The match field is a mask saying which bits must match particular | |
88 | opcode in order for an instruction to be an instance of that | |
89 | opcode. | |
90 | ||
91 | The args field is a string containing two characters for each | |
92 | operand of the instruction. The first specifies the kind of | |
93 | operand; the second, the place it is stored. */ | |
94 | ||
95 | /* Kinds of operands: | |
1fca749b | 96 | Characters used: AaBCcDdEFfGHIJkLlMmnOopQqRrSsTtU VvWXYZ0123|*~%;@!&$?/<>#^+- |
252b5132 RH |
97 | |
98 | D data register only. Stored as 3 bits. | |
99 | A address register only. Stored as 3 bits. | |
100 | a address register indirect only. Stored as 3 bits. | |
101 | R either kind of register. Stored as 4 bits. | |
102 | r either kind of register indirect only. Stored as 4 bits. | |
103 | At the moment, used only for cas2 instruction. | |
104 | F floating point coprocessor register only. Stored as 3 bits. | |
105 | O an offset (or width): immediate data 0-31 or data register. | |
106 | Stored as 6 bits in special format for BF... insns. | |
107 | + autoincrement only. Stored as 3 bits (number of the address register). | |
108 | - autodecrement only. Stored as 3 bits (number of the address register). | |
109 | Q quick immediate data. Stored as 3 bits. | |
110 | This matches an immediate operand only when value is in range 1 .. 8. | |
111 | M moveq immediate data. Stored as 8 bits. | |
112 | This matches an immediate operand only when value is in range -128..127 | |
113 | T trap vector immediate data. Stored as 4 bits. | |
114 | ||
115 | k K-factor for fmove.p instruction. Stored as a 7-bit constant or | |
116 | a three bit register offset, depending on the field type. | |
117 | ||
118 | # immediate data. Stored in special places (b, w or l) | |
119 | which say how many bits to store. | |
120 | ^ immediate data for floating point instructions. Special places | |
121 | are offset by 2 bytes from '#'... | |
122 | B pc-relative address, converted to an offset | |
123 | that is treated as immediate data. | |
124 | d displacement and register. Stores the register as 3 bits | |
125 | and stores the displacement in the entire second word. | |
126 | ||
127 | C the CCR. No need to store it; this is just for filtering validity. | |
128 | S the SR. No need to store, just as with CCR. | |
129 | U the USP. No need to store, just as with CCR. | |
1fca749b ILT |
130 | E the ACC. No need to store, just as with CCR. |
131 | G the MACSR. No need to store, just as with CCR. | |
132 | H the MASK. No need to store, just as with CCR. | |
252b5132 RH |
133 | |
134 | I Coprocessor ID. Not printed if 1. The Coprocessor ID is always | |
135 | extracted from the 'd' field of word one, which means that an extended | |
136 | coprocessor opcode can be skipped using the 'i' place, if needed. | |
137 | ||
138 | s System Control register for the floating point coprocessor. | |
139 | ||
140 | J Misc register for movec instruction, stored in 'j' format. | |
141 | Possible values: | |
142 | 0x000 SFC Source Function Code reg [60, 40, 30, 20, 10] | |
143 | 0x001 DFC Data Function Code reg [60, 40, 30, 20, 10] | |
144 | 0x002 CACR Cache Control Register [60, 40, 30, 20] | |
145 | 0x003 TC MMU Translation Control [60, 40] | |
146 | 0x004 ITT0 Instruction Transparent | |
147 | Translation reg 0 [60, 40] | |
148 | 0x005 ITT1 Instruction Transparent | |
149 | Translation reg 1 [60, 40] | |
150 | 0x006 DTT0 Data Transparent | |
151 | Translation reg 0 [60, 40] | |
152 | 0x007 DTT1 Data Transparent | |
153 | Translation reg 1 [60, 40] | |
154 | 0x008 BUSCR Bus Control Register [60] | |
155 | 0x800 USP User Stack Pointer [60, 40, 30, 20, 10] | |
156 | 0x801 VBR Vector Base reg [60, 40, 30, 20, 10] | |
157 | 0x802 CAAR Cache Address Register [ 30, 20] | |
158 | 0x803 MSP Master Stack Pointer [ 40, 30, 20] | |
159 | 0x804 ISP Interrupt Stack Pointer [ 40, 30, 20] | |
160 | 0x805 MMUSR MMU Status reg [ 40] | |
161 | 0x806 URP User Root Pointer [60, 40] | |
162 | 0x807 SRP Supervisor Root Pointer [60, 40] | |
163 | 0x808 PCR Processor Configuration reg [60] | |
164 | 0xC00 ROMBAR ROM Base Address Register [520X] | |
165 | 0xC04 RAMBAR0 RAM Base Address Register 0 [520X] | |
166 | 0xC05 RAMBAR1 RAM Base Address Register 0 [520X] | |
167 | 0xC0F MBAR0 RAM Base Address Register 0 [520X] | |
168 | ||
169 | L Register list of the type d0-d7/a0-a7 etc. | |
170 | (New! Improved! Can also hold fp0-fp7, as well!) | |
171 | The assembler tries to see if the registers match the insn by | |
172 | looking at where the insn wants them stored. | |
173 | ||
174 | l Register list like L, but with all the bits reversed. | |
175 | Used for going the other way. . . | |
176 | ||
177 | c cache identifier which may be "nc" for no cache, "ic" | |
178 | for instruction cache, "dc" for data cache, or "bc" | |
179 | for both caches. Used in cinv and cpush. Always | |
180 | stored in position "d". | |
181 | ||
1fca749b ILT |
182 | u Any register, with ``upper'' or ``lower'' specification. Used |
183 | in the mac instructions with size word. | |
184 | ||
252b5132 RH |
185 | The remainder are all stored as 6 bits using an address mode and a |
186 | register number; they differ in which addressing modes they match. | |
187 | ||
188 | * all (modes 0-6,7.0-4) | |
189 | ~ alterable memory (modes 2-6,7.0,7.1) | |
190 | (not 0,1,7.2-4) | |
191 | % alterable (modes 0-6,7.0,7.1) | |
192 | (not 7.2-4) | |
193 | ; data (modes 0,2-6,7.0-4) | |
194 | (not 1) | |
195 | @ data, but not immediate (modes 0,2-6,7.0-3) | |
196 | (not 1,7.4) | |
197 | ! control (modes 2,5,6,7.0-3) | |
198 | (not 0,1,3,4,7.4) | |
199 | & alterable control (modes 2,5,6,7.0,7.1) | |
200 | (not 0,1,7.2-4) | |
201 | $ alterable data (modes 0,2-6,7.0,7.1) | |
202 | (not 1,7.2-4) | |
203 | ? alterable control, or data register (modes 0,2,5,6,7.0,7.1) | |
204 | (not 1,3,4,7.2-4) | |
205 | / control, or data register (modes 0,2,5,6,7.0-3) | |
206 | (not 1,3,4,7.4) | |
207 | > *save operands (modes 2,4,5,6,7.0,7.1) | |
208 | (not 0,1,3,7.2-4) | |
209 | < *restore operands (modes 2,3,5,6,7.0-3) | |
210 | (not 0,1,4,7.4) | |
211 | ||
212 | coldfire move operands: | |
213 | m (modes 0-4) | |
214 | n (modes 5,7.2) | |
215 | o (modes 6,7.0,7.1,7.3,7.4) | |
216 | p (modes 0-5) | |
217 | ||
218 | coldfire bset/bclr/btst/mulsl/mulul operands: | |
219 | q (modes 0,2-5) | |
220 | v (modes 0,2-5,7.0,7.1) | |
221 | */ | |
222 | ||
223 | /* For the 68851: */ | |
224 | /* | |
225 | I didn't use much imagination in choosing the | |
226 | following codes, so many of them aren't very | |
227 | mnemonic. -rab | |
228 | ||
229 | 0 32 bit pmmu register | |
230 | Possible values: | |
231 | 000 TC Translation Control Register (68030, 68851) | |
232 | ||
233 | 1 16 bit pmmu register | |
234 | 111 AC Access Control (68851) | |
235 | ||
236 | 2 8 bit pmmu register | |
237 | 100 CAL Current Access Level (68851) | |
238 | 101 VAL Validate Access Level (68851) | |
239 | 110 SCC Stack Change Control (68851) | |
240 | ||
241 | 3 68030-only pmmu registers (32 bit) | |
242 | 010 TT0 Transparent Translation reg 0 | |
243 | (aka Access Control reg 0 -- AC0 -- on 68ec030) | |
244 | 011 TT1 Transparent Translation reg 1 | |
245 | (aka Access Control reg 1 -- AC1 -- on 68ec030) | |
246 | ||
247 | W wide pmmu registers | |
248 | Possible values: | |
249 | 001 DRP Dma Root Pointer (68851) | |
250 | 010 SRP Supervisor Root Pointer (68030, 68851) | |
251 | 011 CRP Cpu Root Pointer (68030, 68851) | |
252 | ||
253 | f function code register (68030, 68851) | |
254 | 0 SFC | |
255 | 1 DFC | |
256 | ||
257 | V VAL register only (68851) | |
258 | ||
259 | X BADx, BACx (16 bit) | |
260 | 100 BAD Breakpoint Acknowledge Data (68851) | |
261 | 101 BAC Breakpoint Acknowledge Control (68851) | |
262 | ||
263 | Y PSR (68851) (MMUSR on 68030) (ACUSR on 68ec030) | |
264 | Z PCSR (68851) | |
265 | ||
266 | | memory (modes 2-6, 7.*) | |
267 | ||
268 | t address test level (68030 only) | |
269 | Stored as 3 bits, range 0-7. | |
270 | Also used for breakpoint instruction now. | |
271 | ||
272 | */ | |
273 | ||
274 | /* Places to put an operand, for non-general operands: | |
1fca749b ILT |
275 | Characters used: BbCcDdghijkLlMmNnostWw123456789 |
276 | ||
252b5132 RH |
277 | s source, low bits of first word. |
278 | d dest, shifted 9 in first word | |
279 | 1 second word, shifted 12 | |
280 | 2 second word, shifted 6 | |
281 | 3 second word, shifted 0 | |
282 | 4 third word, shifted 12 | |
283 | 5 third word, shifted 6 | |
284 | 6 third word, shifted 0 | |
285 | 7 second word, shifted 7 | |
286 | 8 second word, shifted 10 | |
287 | 9 second word, shifted 5 | |
288 | D store in both place 1 and place 3; for divul and divsl. | |
289 | B first word, low byte, for branch displacements | |
290 | W second word (entire), for branch displacements | |
291 | L second and third words (entire), for branch displacements | |
292 | (also overloaded for move16) | |
293 | b second word, low byte | |
294 | w second word (entire) [variable word/long branch offset for dbra] | |
295 | W second word (entire) (must be signed 16 bit value) | |
296 | l second and third word (entire) | |
297 | g variable branch offset for bra and similar instructions. | |
298 | The place to store depends on the magnitude of offset. | |
299 | t store in both place 7 and place 8; for floating point operations | |
300 | c branch offset for cpBcc operations. | |
301 | The place to store is word two if bit six of word one is zero, | |
302 | and words two and three if bit six of word one is one. | |
303 | i Increment by two, to skip over coprocessor extended operands. Only | |
304 | works with the 'I' format. | |
305 | k Dynamic K-factor field. Bits 6-4 of word 2, used as a register number. | |
306 | Also used for dynamic fmovem instruction. | |
307 | C floating point coprocessor constant - 7 bits. Also used for static | |
308 | K-factors... | |
309 | j Movec register #, stored in 12 low bits of second word. | |
1fca749b ILT |
310 | m For M[S]ACx; 4 bits split with MSB shifted 6 bits in first word |
311 | and remaining 3 bits of register shifted 9 bits in first word. | |
312 | Indicate upper/lower in 1 bit shifted 7 bits in second word. | |
313 | Use with `R' or `u' format. | |
314 | n `m' withouth upper/lower indication. (For M[S]ACx; 4 bits split | |
315 | with MSB shifted 6 bits in first word and remaining 3 bits of | |
316 | register shifted 9 bits in first word. No upper/lower | |
317 | indication is done.) Use with `R' or `u' format. | |
318 | o For M[S]ACw; 4 bits shifted 12 in second word (like `1'). | |
319 | Indicate upper/lower in 1 bit shifted 7 bits in second word. | |
320 | Use with `R' or `u' format. | |
321 | M For M[S]ACw; 4 bits in low bits of first word. Indicate | |
322 | upper/lower in 1 bit shifted 6 bits in second word. Use with | |
323 | `R' or `u' format. | |
324 | N For M[S]ACw; 4 bits in low bits of second word. Indicate | |
325 | upper/lower in 1 bit shifted 6 bits in second word. Use with | |
326 | `R' or `u' format. | |
327 | h shift indicator (scale factor), 1 bit shifted 10 in second word | |
252b5132 RH |
328 | |
329 | Places to put operand, for general operands: | |
330 | d destination, shifted 6 bits in first word | |
331 | b source, at low bit of first word, and immediate uses one byte | |
332 | w source, at low bit of first word, and immediate uses two bytes | |
333 | l source, at low bit of first word, and immediate uses four bytes | |
334 | s source, at low bit of first word. | |
335 | Used sometimes in contexts where immediate is not allowed anyway. | |
336 | f single precision float, low bit of 1st word, immediate uses 4 bytes | |
337 | F double precision float, low bit of 1st word, immediate uses 8 bytes | |
338 | x extended precision float, low bit of 1st word, immediate uses 12 bytes | |
339 | p packed float, low bit of 1st word, immediate uses 12 bytes | |
340 | */ | |
341 | ||
342 | extern const struct m68k_opcode m68k_opcodes[]; | |
343 | extern const struct m68k_opcode_alias m68k_opcode_aliases[]; | |
344 | ||
345 | extern const int m68k_numopcodes, m68k_numaliases; | |
346 | ||
347 | /* end of m68k-opcode.h */ |