[deliverable/binutils-gdb.git] / ld / scripttempl / elf.sc

#
# Unusual variables checked by this code:
#	NOP - two byte opcode for no-op (defaults to 0)
#	DATA_ADDR - if end-of-text-plus-one-page isn't right for data start
#	INITIAL_READONLY_SECTIONS - at start of text segment
#	OTHER_READONLY_SECTIONS - other than .text .init .rodata ...
#		(e.g., .PARISC.milli)
#	OTHER_TEXT_SECTIONS - these get put in .text when relocating
#	OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ...
#		(e.g., .PARISC.global)
#	OTHER_BSS_SECTIONS - other than .bss .sbss ...
#	OTHER_SECTIONS - at the end
#	EXECUTABLE_SYMBOLS - symbols that must be defined for an
#		executable (e.g., _DYNAMIC_LINK)
#	TEXT_START_SYMBOLS - symbols that appear at the start of the
#		.text section.
#	DATA_START_SYMBOLS - symbols that appear at the start of the
#		.data section.
#	OTHER_GOT_SYMBOLS - symbols defined just before .got.
#	OTHER_GOT_SECTIONS - sections just after .got and .sdata.
#	OTHER_BSS_SYMBOLS - symbols that appear at the start of the
#		.bss section besides __bss_start.
#	DATA_PLT - .plt should be in data segment, not text segment.
#	TEXT_DYNAMIC - .dynamic in text segment, not data segment.
#	EMBEDDED - whether this is for an embedded system. 
#	SHLIB_TEXT_START_ADDR - if set, add to SIZEOF_HEADERS to set
#		start address of shared library.
#	INPUT_FILES - INPUT command of files to always include
#	WRITABLE_RODATA - if set, the .rodata section should be writable
#	INIT_START, INIT_END -  statements just before and just after
# 	combination of .init sections.
#	FINI_START, FINI_END - statements just before and just after
# 	combination of .fini sections.
#
# When adding sections, do note that the names of some sections are used
# when specifying the start address of the next.
#

test -z "$ENTRY" && ENTRY=_start
test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT}
test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi
test -z "${ELFSIZE}" && ELFSIZE=32
test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8"
test "$LD_FLAG" = "N" && DATA_ADDR=.
INTERP=".interp   ${RELOCATING-0} : { *(.interp) 	}"
PLT=".plt    ${RELOCATING-0} : { *(.plt)	}"
DYNAMIC=".dynamic     ${RELOCATING-0} : { *(.dynamic) }"
RODATA=".rodata ${RELOCATING-0} : { *(.rodata) ${RELOCATING+*(.rodata.*)} ${RELOCATING+*(.gnu.linkonce.r*)} }"
CTOR=".ctors ${CONSTRUCTING-0} : 
  {
    ${CONSTRUCTING+${CTOR_START}}
    /* gcc uses crtbegin.o to find the start of
       the constructors, so we make sure it is
       first.  Because this is a wildcard, it
       doesn't matter if the user does not
       actually link against crtbegin.o; the
       linker won't look for a file to match a
       wildcard.  The wildcard also means that it
       doesn't matter which directory crtbegin.o
       is in.  */

    KEEP (*crtbegin.o(.ctors))

    /* We don't want to include the .ctor section from
       from the crtend.o file until after the sorted ctors.
       The .ctor section from the crtend file contains the
       end of ctors marker and it must be last */

    KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
    KEEP (*(SORT(.ctors.*)))
    KEEP (*(.ctors))
    ${CONSTRUCTING+${CTOR_END}}
  }"

DTOR=" .dtors       ${CONSTRUCTING-0} :
  {
    ${CONSTRUCTING+${DTOR_START}}
    KEEP (*crtbegin.o(.dtors))
    KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
    KEEP (*(SORT(.dtors.*)))
    KEEP (*(.dtors))
    ${CONSTRUCTING+${DTOR_END}}
  }"

# if this is for an embedded system, don't add SIZEOF_HEADERS.
if [ -z "$EMBEDDED" ]; then
   test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR} + SIZEOF_HEADERS"
else
   test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR}"
fi

cat <<EOF
OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}",
	      "${LITTLE_OUTPUT_FORMAT}")
OUTPUT_ARCH(${OUTPUT_ARCH})
ENTRY(${ENTRY})

${RELOCATING+${LIB_SEARCH_DIRS}}
${RELOCATING+/* Do we need any of these for elf?
   __DYNAMIC = 0; ${STACKZERO+${STACKZERO}} ${SHLIB_PATH+${SHLIB_PATH}}  */}
${RELOCATING+${EXECUTABLE_SYMBOLS}}
${RELOCATING+${INPUT_FILES}}
${RELOCATING- /* For some reason, the Solaris linker makes bad executables
  if gld -r is used and the intermediate file has sections starting
  at non-zero addresses.  Could be a Solaris ld bug, could be a GNU ld
  bug.  But for now assigning the zero vmas works.  */}

SECTIONS
{
  /* Read-only sections, merged into text segment: */
  ${CREATE_SHLIB-${RELOCATING+. = ${TEXT_BASE_ADDRESS};}}
  ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}}
  ${CREATE_SHLIB-${INTERP}}
  ${INITIAL_READONLY_SECTIONS}
  ${TEXT_DYNAMIC+${DYNAMIC}}
  .hash        ${RELOCATING-0} : { *(.hash)		}
  .dynsym      ${RELOCATING-0} : { *(.dynsym)		}
  .dynstr      ${RELOCATING-0} : { *(.dynstr)		}
  .gnu.version ${RELOCATING-0} : { *(.gnu.version)	}
  .gnu.version_d ${RELOCATING-0} : { *(.gnu.version_d)	}
  .gnu.version_r ${RELOCATING-0} : { *(.gnu.version_r)	}

  .rel.init    ${RELOCATING-0} : { *(.rel.init)	}
  .rela.init   ${RELOCATING-0} : { *(.rela.init)	}
  .rel.text    ${RELOCATING-0} :
    {
      *(.rel.text)
      ${RELOCATING+*(.rel.text.*)}
      ${RELOCATING+*(.rel.gnu.linkonce.t*)}
    }
  .rela.text   ${RELOCATING-0} :
    {
      *(.rela.text)
      ${RELOCATING+*(.rela.text.*)}
      ${RELOCATING+*(.rela.gnu.linkonce.t*)}
    }
  .rel.fini    ${RELOCATING-0} : { *(.rel.fini)	}
  .rela.fini   ${RELOCATING-0} : { *(.rela.fini)	}
  .rel.rodata  ${RELOCATING-0} :
    {
      *(.rel.rodata)
      ${RELOCATING+*(.rel.rodata.*)}
      ${RELOCATING+*(.rel.gnu.linkonce.r*)}
    }
  .rela.rodata ${RELOCATING-0} :
    {
      *(.rela.rodata)
      ${RELOCATING+*(.rela.rodata.*)}
      ${RELOCATING+*(.rela.gnu.linkonce.r*)}
    }
  ${OTHER_READONLY_RELOC_SECTIONS}
  .rel.data    ${RELOCATING-0} :
    {
      *(.rel.data)
      ${RELOCATING+*(.rel.data.*)}
      ${RELOCATING+*(.rel.gnu.linkonce.d*)}
    }
  .rela.data   ${RELOCATING-0} :
    {
      *(.rela.data)
      ${RELOCATING+*(.rela.data.*)}
      ${RELOCATING+*(.rela.gnu.linkonce.d*)}
    }
  .rel.ctors   ${RELOCATING-0} : { *(.rel.ctors)	}
  .rela.ctors  ${RELOCATING-0} : { *(.rela.ctors)	}
  .rel.dtors   ${RELOCATING-0} : { *(.rel.dtors)	}
  .rela.dtors  ${RELOCATING-0} : { *(.rela.dtors)	}
  .rel.got     ${RELOCATING-0} : { *(.rel.got)		}
  .rela.got    ${RELOCATING-0} : { *(.rela.got)		}
  ${OTHER_GOT_RELOC_SECTIONS}
  .rel.sdata   ${RELOCATING-0} :
    {
      *(.rel.sdata)
      ${RELOCATING+*(.rel.sdata.*)}
      ${RELOCATING+*(.rel.gnu.linkonce.s*)}
    }
  .rela.sdata   ${RELOCATING-0} :
    {
      *(.rela.sdata)
      ${RELOCATING+*(.rela.sdata.*)}
      ${RELOCATING+*(.rela.gnu.linkonce.s*)}
    }
  .rel.sbss    ${RELOCATING-0} : { *(.rel.sbss)		}
  .rela.sbss   ${RELOCATING-0} : { *(.rela.sbss)	}
  .rel.bss     ${RELOCATING-0} : { *(.rel.bss)		}
  .rela.bss    ${RELOCATING-0} : { *(.rela.bss)		}
  .rel.plt     ${RELOCATING-0} : { *(.rel.plt)		}
  .rela.plt    ${RELOCATING-0} : { *(.rela.plt)		}

  .init        ${RELOCATING-0} : 
  { 
    ${INIT_START}
    KEEP (*(.init))
    ${INIT_END}
  } =${NOP-0}

  ${DATA_PLT-${PLT}}
  .text    ${RELOCATING-0} :
  {
    ${RELOCATING+${TEXT_START_SYMBOLS}}
    *(.text)
    ${RELOCATING+*(.text.*)}
    *(.stub)
    /* .gnu.warning sections are handled specially by elf32.em.  */
    *(.gnu.warning)
    ${RELOCATING+*(.gnu.linkonce.t*)}
    ${RELOCATING+${OTHER_TEXT_SECTIONS}}
  } =${NOP-0}
  ${RELOCATING+_etext = .;}
  ${RELOCATING+PROVIDE (etext = .);}
  .fini    ${RELOCATING-0} :
  {
    ${FINI_START}
    KEEP (*(.fini))
    ${FINI_END}
  } =${NOP-0}
  ${WRITABLE_RODATA-${RODATA}}
  .rodata1 ${RELOCATING-0} : { *(.rodata1) }
  ${RELOCATING+${OTHER_READONLY_SECTIONS}}

  /* Adjust the address for the data segment.  We want to adjust up to
     the same address within the page on the next page up.  */
  ${CREATE_SHLIB-${RELOCATING+. = ${DATA_ADDR-ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))};}}
  ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_DATA_ADDR-ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))};}}

  .data  ${RELOCATING-0} :
  {
    ${RELOCATING+${DATA_START_SYMBOLS}}
    *(.data)
    ${RELOCATING+*(.data.*)}
    ${RELOCATING+*(.gnu.linkonce.d*)}
    ${CONSTRUCTING+SORT(CONSTRUCTORS)}
  }
  .data1 ${RELOCATING-0} : { *(.data1) }
  .eh_frame : { *(.eh_frame) }
  .gcc_except_table : { *(.gcc_except_table) }
  ${WRITABLE_RODATA+${RODATA}}
  ${RELOCATING+${OTHER_READWRITE_SECTIONS}}
  ${RELOCATING+${CTOR}}
  ${RELOCATING+${DTOR}}
  ${DATA_PLT+${PLT}}
  ${RELOCATING+${OTHER_GOT_SYMBOLS}}
  .got         ${RELOCATING-0} : { *(.got.plt) *(.got) }
  ${TEXT_DYNAMIC-${DYNAMIC}}
  /* We want the small data sections together, so single-instruction offsets
     can access them all, and initialized data all before uninitialized, so
     we can shorten the on-disk segment size.  */
  .sdata   ${RELOCATING-0} : 
  {
    ${RELOCATING+${SDATA_START_SYMBOLS}}
    *(.sdata) 
    ${RELOCATING+*(.sdata.*)}
    ${RELOCATING+*(.gnu.linkonce.s.*)}
  }
  ${RELOCATING+${OTHER_GOT_SECTIONS}}
  ${RELOCATING+_edata = .;}
  ${RELOCATING+PROVIDE (edata = .);}
  ${RELOCATING+__bss_start = .;}
  ${RELOCATING+${OTHER_BSS_SYMBOLS}}
  .sbss    ${RELOCATING-0} :
  {
    *(.dynsbss)
    *(.sbss)
    ${RELOCATING+*(.sbss.*)}
    *(.scommon)
  }
  .bss     ${RELOCATING-0} :
  {
   *(.dynbss)
   *(.bss)
   ${RELOCATING+*(.bss.*)}
   *(COMMON)
   /* Align here to ensure that the .bss section occupies space up to
      _end.  Align after .bss to ensure correct alignment even if the
      .bss section disappears because there are no input sections.  */
   ${RELOCATING+. = ALIGN(${ALIGNMENT});}
  }
  ${RELOCATING+${OTHER_BSS_SECTIONS}}
  ${RELOCATING+. = ALIGN(${ALIGNMENT});}
  ${RELOCATING+_end = .;}
  ${RELOCATING+${OTHER_BSS_END_SYMBOLS}}
  ${RELOCATING+PROVIDE (end = .);}

  /* Stabs debugging sections.  */
  .stab 0 : { *(.stab) }
  .stabstr 0 : { *(.stabstr) }
  .stab.excl 0 : { *(.stab.excl) }
  .stab.exclstr 0 : { *(.stab.exclstr) }
  .stab.index 0 : { *(.stab.index) }
  .stab.indexstr 0 : { *(.stab.indexstr) }

  .comment 0 : { *(.comment) }

  /* DWARF debug sections.
     Symbols in the DWARF debugging sections are relative to the beginning
     of the section so we begin them at 0.  */

  /* DWARF 1 */
  .debug          0 : { *(.debug) }
  .line           0 : { *(.line) }

  /* GNU DWARF 1 extensions */
  .debug_srcinfo  0 : { *(.debug_srcinfo) }
  .debug_sfnames  0 : { *(.debug_sfnames) }

  /* DWARF 1.1 and DWARF 2 */
  .debug_aranges  0 : { *(.debug_aranges) }
  .debug_pubnames 0 : { *(.debug_pubnames) }

  /* DWARF 2 */
  .debug_info     0 : { *(.debug_info) }
  .debug_abbrev   0 : { *(.debug_abbrev) }
  .debug_line     0 : { *(.debug_line) }
  .debug_frame    0 : { *(.debug_frame) }
  .debug_str      0 : { *(.debug_str) }
  .debug_loc      0 : { *(.debug_loc) }
  .debug_macinfo  0 : { *(.debug_macinfo) }

  /* SGI/MIPS DWARF 2 extensions */
  .debug_weaknames 0 : { *(.debug_weaknames) }
  .debug_funcnames 0 : { *(.debug_funcnames) }
  .debug_typenames 0 : { *(.debug_typenames) }
  .debug_varnames  0 : { *(.debug_varnames) }

  ${RELOCATING+${OTHER_RELOCATING_SECTIONS}}

  /* These must appear regardless of ${RELOCATING}.  */
  ${OTHER_SECTIONS}
}
EOF
Commit	Line	Data
252b5132 RH	1	#
	2	# Unusual variables checked by this code:
	3	# NOP - two byte opcode for no-op (defaults to 0)
	4	# DATA_ADDR - if end-of-text-plus-one-page isn't right for data start
	5	# INITIAL_READONLY_SECTIONS - at start of text segment
	6	# OTHER_READONLY_SECTIONS - other than .text .init .rodata ...
	7	# (e.g., .PARISC.milli)
	8	# OTHER_TEXT_SECTIONS - these get put in .text when relocating
	9	# OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ...
	10	# (e.g., .PARISC.global)
904ecb2d	11	# OTHER_BSS_SECTIONS - other than .bss .sbss ...
252b5132 RH	12	# OTHER_SECTIONS - at the end
	13	# EXECUTABLE_SYMBOLS - symbols that must be defined for an
	14	# executable (e.g., _DYNAMIC_LINK)
	15	# TEXT_START_SYMBOLS - symbols that appear at the start of the
	16	# .text section.
	17	# DATA_START_SYMBOLS - symbols that appear at the start of the
	18	# .data section.
	19	# OTHER_GOT_SYMBOLS - symbols defined just before .got.
	20	# OTHER_GOT_SECTIONS - sections just after .got and .sdata.
	21	# OTHER_BSS_SYMBOLS - symbols that appear at the start of the
	22	# .bss section besides __bss_start.
	23	# DATA_PLT - .plt should be in data segment, not text segment.
	24	# TEXT_DYNAMIC - .dynamic in text segment, not data segment.
	25	# EMBEDDED - whether this is for an embedded system.
	26	# SHLIB_TEXT_START_ADDR - if set, add to SIZEOF_HEADERS to set
	27	# start address of shared library.
	28	# INPUT_FILES - INPUT command of files to always include
a8e53fb0	29	# WRITABLE_RODATA - if set, the .rodata section should be writable
904ecb2d JL	30	# INIT_START, INIT_END - statements just before and just after
	31	# combination of .init sections.
	32	# FINI_START, FINI_END - statements just before and just after
	33	# combination of .fini sections.
252b5132 RH	34	#
	35	# When adding sections, do note that the names of some sections are used
	36	# when specifying the start address of the next.
	37	#
	38
	39	test -z "$ENTRY" && ENTRY=_start
	40	test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT}
	41	test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
	42	if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi
	43	test -z "${ELFSIZE}" && ELFSIZE=32
	44	test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8"
	45	test "$LD_FLAG" = "N" && DATA_ADDR=.
	46	INTERP=".interp ${RELOCATING-0} : { *(.interp) }"
	47	PLT=".plt ${RELOCATING-0} : { *(.plt) }"
	48	DYNAMIC=".dynamic ${RELOCATING-0} : { *(.dynamic) }"
a8e53fb0	49	RODATA=".rodata ${RELOCATING-0} : { (.rodata) ${RELOCATING+(.rodata.)} ${RELOCATING+(.gnu.linkonce.r*)} }"
252b5132 RH	50	CTOR=".ctors ${CONSTRUCTING-0} :
	51	{
	52	${CONSTRUCTING+${CTOR_START}}
	53	/* gcc uses crtbegin.o to find the start of
	54	the constructors, so we make sure it is
	55	first. Because this is a wildcard, it
	56	doesn't matter if the user does not
	57	actually link against crtbegin.o; the
	58	linker won't look for a file to match a
	59	wildcard. The wildcard also means that it
	60	doesn't matter which directory crtbegin.o
	61	is in. */
	62
	63	KEEP (*crtbegin.o(.ctors))
	64
	65	/* We don't want to include the .ctor section from
	66	from the crtend.o file until after the sorted ctors.
	67	The .ctor section from the crtend file contains the
	68	end of ctors marker and it must be last */
	69
	70	KEEP ((EXCLUDE_FILE (crtend.o) .ctors))
	71	KEEP ((SORT(.ctors.)))
	72	KEEP (*(.ctors))
	73	${CONSTRUCTING+${CTOR_END}}
	74	}"
	75
	76	DTOR=" .dtors ${CONSTRUCTING-0} :
	77	{
	78	${CONSTRUCTING+${DTOR_START}}
	79	KEEP (*crtbegin.o(.dtors))
	80	KEEP ((EXCLUDE_FILE (crtend.o) .dtors))
	81	KEEP ((SORT(.dtors.)))
	82	KEEP (*(.dtors))
	83	${CONSTRUCTING+${DTOR_END}}
	84	}"
	85
	86	# if this is for an embedded system, don't add SIZEOF_HEADERS.
	87	if [ -z "$EMBEDDED" ]; then
	88	test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR} + SIZEOF_HEADERS"
	89	else
	90	test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR}"
	91	fi
	92
	93	cat <<EOF
	94	OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}",
	95	"${LITTLE_OUTPUT_FORMAT}")
	96	OUTPUT_ARCH(${OUTPUT_ARCH})
	97	ENTRY(${ENTRY})
	98
	99	${RELOCATING+${LIB_SEARCH_DIRS}}
	100	${RELOCATING+/* Do we need any of these for elf?
	101	__DYNAMIC = 0; ${STACKZERO+${STACKZERO}} ${SHLIB_PATH+${SHLIB_PATH}} */}
	102	${RELOCATING+${EXECUTABLE_SYMBOLS}}
	103	${RELOCATING+${INPUT_FILES}}
	104	${RELOCATING- /* For some reason, the Solaris linker makes bad executables
	105	if gld -r is used and the intermediate file has sections starting
	106	at non-zero addresses. Could be a Solaris ld bug, could be a GNU ld
	107	bug. But for now assigning the zero vmas works. */}
	108
	109	SECTIONS
	110	{
	111	/* Read-only sections, merged into text segment: */
	112	${CREATE_SHLIB-${RELOCATING+. = ${TEXT_BASE_ADDRESS};}}
	113	${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}}
114	${CREATE_SHLIB-${INTERP}}
115	${INITIAL_READONLY_SECTIONS}
116	${TEXT_DYNAMIC+${DYNAMIC}}
117	.hash ${RELOCATING-0} : { *(.hash) }
118	.dynsym ${RELOCATING-0} : { *(.dynsym) }
119	.dynstr ${RELOCATING-0} : { *(.dynstr) }
120	.gnu.version ${RELOCATING-0} : { *(.gnu.version) }
121	.gnu.version_d ${RELOCATING-0} : { *(.gnu.version_d) }
122	.gnu.version_r ${RELOCATING-0} : { *(.gnu.version_r) }
9e4141bc RH	123
	124	.rel.init ${RELOCATING-0} : { *(.rel.init) }
	125	.rela.init ${RELOCATING-0} : { *(.rela.init) }
252b5132 RH	126	.rel.text ${RELOCATING-0} :
	127	{
	128	*(.rel.text)
	129	${RELOCATING+(.rel.text.)}
	130	${RELOCATING+(.rel.gnu.linkonce.t)}
	131	}
	132	.rela.text ${RELOCATING-0} :
	133	{
	134	*(.rela.text)
	135	${RELOCATING+(.rela.text.)}
	136	${RELOCATING+(.rela.gnu.linkonce.t)}
	137	}
9e4141bc RH	138	.rel.fini ${RELOCATING-0} : { *(.rel.fini) }
9e4141bc RH	139	.rela.fini ${RELOCATING-0} : { *(.rela.fini) }
252b5132 RH	140	.rel.rodata ${RELOCATING-0} :
	141	{
	142	*(.rel.rodata)
	143	${RELOCATING+(.rel.rodata.)}
	144	${RELOCATING+(.rel.gnu.linkonce.r)}
	145	}
	146	.rela.rodata ${RELOCATING-0} :
	147	{
	148	*(.rela.rodata)
	149	${RELOCATING+(.rela.rodata.)}
	150	${RELOCATING+(.rela.gnu.linkonce.r)}
	151	}
9e4141bc RH	152	${OTHER_READONLY_RELOC_SECTIONS}
	153	.rel.data ${RELOCATING-0} :
	154	{
	155	*(.rel.data)
	156	${RELOCATING+(.rel.data.)}
	157	${RELOCATING+(.rel.gnu.linkonce.d)}
	158	}
	159	.rela.data ${RELOCATING-0} :
	160	{
	161	*(.rela.data)
	162	${RELOCATING+(.rela.data.)}
	163	${RELOCATING+(.rela.gnu.linkonce.d)}
	164	}
252b5132 RH	165	.rel.ctors ${RELOCATING-0} : { *(.rel.ctors) }
	166	.rela.ctors ${RELOCATING-0} : { *(.rela.ctors) }
	167	.rel.dtors ${RELOCATING-0} : { *(.rel.dtors) }
	168	.rela.dtors ${RELOCATING-0} : { *(.rela.dtors) }
9e4141bc RH	169	.rel.got ${RELOCATING-0} : { *(.rel.got) }
	170	.rela.got ${RELOCATING-0} : { *(.rela.got) }
	171	${OTHER_GOT_RELOC_SECTIONS}
cfd0966c GK	172	.rel.sdata ${RELOCATING-0} :
	173	{
	174	*(.rel.sdata)
	175	${RELOCATING+(.rel.sdata.)}
	176	${RELOCATING+(.rel.gnu.linkonce.s)}
	177	}
	178	.rela.sdata ${RELOCATING-0} :
	179	{
	180	*(.rela.sdata)
	181	${RELOCATING+(.rela.sdata.)}
	182	${RELOCATING+(.rela.gnu.linkonce.s)}
	183	}
	184	.rel.sbss ${RELOCATING-0} : { *(.rel.sbss) }
	185	.rela.sbss ${RELOCATING-0} : { *(.rela.sbss) }
252b5132 RH	186	.rel.bss ${RELOCATING-0} : { *(.rel.bss) }
	187	.rela.bss ${RELOCATING-0} : { *(.rela.bss) }
	188	.rel.plt ${RELOCATING-0} : { *(.rel.plt) }
	189	.rela.plt ${RELOCATING-0} : { *(.rela.plt) }
9e4141bc	190
904ecb2d JL	191	.init ${RELOCATING-0} :
	192	{
	193	${INIT_START}
	194	KEEP (*(.init))
	195	${INIT_END}
	196	} =${NOP-0}
	197
252b5132 RH	198	${DATA_PLT-${PLT}}
	199	.text ${RELOCATING-0} :
	200	{
	201	${RELOCATING+${TEXT_START_SYMBOLS}}
	202	*(.text)
	203	${RELOCATING+(.text.)}
	204	*(.stub)
	205	/* .gnu.warning sections are handled specially by elf32.em. */
	206	*(.gnu.warning)
	207	${RELOCATING+(.gnu.linkonce.t)}
	208	${RELOCATING+${OTHER_TEXT_SECTIONS}}
	209	} =${NOP-0}
	210	${RELOCATING+_etext = .;}
	211	${RELOCATING+PROVIDE (etext = .);}
904ecb2d JL	212	.fini ${RELOCATING-0} :
	213	{
	214	${FINI_START}
	215	KEEP (*(.fini))
	216	${FINI_END}
	217	} =${NOP-0}
a8e53fb0	218	${WRITABLE_RODATA-${RODATA}}
252b5132 RH	219	.rodata1 ${RELOCATING-0} : { *(.rodata1) }
	220	${RELOCATING+${OTHER_READONLY_SECTIONS}}
	221
	222	/* Adjust the address for the data segment. We want to adjust up to
	223	the same address within the page on the next page up. */
	224	${CREATE_SHLIB-${RELOCATING+. = ${DATA_ADDR-ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))};}}
	225	${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_DATA_ADDR-ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))};}}
	226
	227	.data ${RELOCATING-0} :
	228	{
	229	${RELOCATING+${DATA_START_SYMBOLS}}
	230	*(.data)
	231	${RELOCATING+(.data.)}
	232	${RELOCATING+(.gnu.linkonce.d)}
	233	${CONSTRUCTING+SORT(CONSTRUCTORS)}
	234	}
	235	.data1 ${RELOCATING-0} : { *(.data1) }
	236	.eh_frame : { *(.eh_frame) }
	237	.gcc_except_table : { *(.gcc_except_table) }
a8e53fb0	238	${WRITABLE_RODATA+${RODATA}}
252b5132 RH	239	${RELOCATING+${OTHER_READWRITE_SECTIONS}}
	240	${RELOCATING+${CTOR}}
	241	${RELOCATING+${DTOR}}
	242	${DATA_PLT+${PLT}}
	243	${RELOCATING+${OTHER_GOT_SYMBOLS}}
	244	.got ${RELOCATING-0} : { (.got.plt) (.got) }
	245	${TEXT_DYNAMIC-${DYNAMIC}}
	246	/* We want the small data sections together, so single-instruction offsets
	247	can access them all, and initialized data all before uninitialized, so
	248	we can shorten the on-disk segment size. */
cfd0966c GK	249	.sdata ${RELOCATING-0} :
	250	{
	251	${RELOCATING+${SDATA_START_SYMBOLS}}
	252	*(.sdata)
	253	${RELOCATING+(.sdata.)}
	254	${RELOCATING+(.gnu.linkonce.s.)}
	255	}
252b5132	256	${RELOCATING+${OTHER_GOT_SECTIONS}}
9e4141bc	257	${RELOCATING+_edata = .;}
252b5132 RH	258	${RELOCATING+PROVIDE (edata = .);}
	259	${RELOCATING+__bss_start = .;}
	260	${RELOCATING+${OTHER_BSS_SYMBOLS}}
3c9cf3a3 NC	261	.sbss ${RELOCATING-0} :
3c9cf3a3 NC	262	{
cfd0966c GK	263	*(.dynsbss)
	264	*(.sbss)
	265	${RELOCATING+(.sbss.)}
	266	*(.scommon)
3c9cf3a3	267	}
252b5132 RH	268	.bss ${RELOCATING-0} :
	269	{
	270	*(.dynbss)
	271	*(.bss)
3c9cf3a3	272	${RELOCATING+(.bss.)}
252b5132 RH	273	*(COMMON)
	274	/* Align here to ensure that the .bss section occupies space up to
	275	_end. Align after .bss to ensure correct alignment even if the
	276	.bss section disappears because there are no input sections. */
	277	${RELOCATING+. = ALIGN(${ALIGNMENT});}
	278	}
904ecb2d	279	${RELOCATING+${OTHER_BSS_SECTIONS}}
252b5132	280	${RELOCATING+. = ALIGN(${ALIGNMENT});}
9e4141bc	281	${RELOCATING+_end = .;}
252b5132 RH	282	${RELOCATING+${OTHER_BSS_END_SYMBOLS}}
	283	${RELOCATING+PROVIDE (end = .);}
	284
	285	/* Stabs debugging sections. */
	286	.stab 0 : { *(.stab) }
	287	.stabstr 0 : { *(.stabstr) }
	288	.stab.excl 0 : { *(.stab.excl) }
	289	.stab.exclstr 0 : { *(.stab.exclstr) }
	290	.stab.index 0 : { *(.stab.index) }
	291	.stab.indexstr 0 : { *(.stab.indexstr) }
	292
	293	.comment 0 : { *(.comment) }
	294
	295	/* DWARF debug sections.
	296	Symbols in the DWARF debugging sections are relative to the beginning
	297	of the section so we begin them at 0. */
	298
	299	/* DWARF 1 */
	300	.debug 0 : { *(.debug) }
	301	.line 0 : { *(.line) }
	302
	303	/* GNU DWARF 1 extensions */
	304	.debug_srcinfo 0 : { *(.debug_srcinfo) }
	305	.debug_sfnames 0 : { *(.debug_sfnames) }
	306
	307	/* DWARF 1.1 and DWARF 2 */
	308	.debug_aranges 0 : { *(.debug_aranges) }
	309	.debug_pubnames 0 : { *(.debug_pubnames) }
	310
	311	/* DWARF 2 */
	312	.debug_info 0 : { *(.debug_info) }
	313	.debug_abbrev 0 : { *(.debug_abbrev) }
	314	.debug_line 0 : { *(.debug_line) }
	315	.debug_frame 0 : { *(.debug_frame) }
	316	.debug_str 0 : { *(.debug_str) }
	317	.debug_loc 0 : { *(.debug_loc) }
	318	.debug_macinfo 0 : { *(.debug_macinfo) }
	319
	320	/* SGI/MIPS DWARF 2 extensions */
	321	.debug_weaknames 0 : { *(.debug_weaknames) }
	322	.debug_funcnames 0 : { *(.debug_funcnames) }
	323	.debug_typenames 0 : { *(.debug_typenames) }
	324	.debug_varnames 0 : { *(.debug_varnames) }
	325
	326	${RELOCATING+${OTHER_RELOCATING_SECTIONS}}
	327
	328	/* These must appear regardless of ${RELOCATING}. */
	329	${OTHER_SECTIONS}
	330	}
	331	EOF