Commit | Line | Data |
---|---|---|
85fbca6a NC |
1 | # |
2 | # Unusual variables checked by this code: | |
3 | # NOP - four byte opcode for no-op (defaults to 0) | |
4 | # DATA_ADDR - if end-of-text-plus-one-page isn't right for data start | |
5 | # INITIAL_READONLY_SECTIONS - at start of text segment | |
6 | # OTHER_READONLY_SECTIONS - other than .text .init .rodata ... | |
7 | # (e.g., .PARISC.milli) | |
8 | # OTHER_TEXT_SECTIONS - these get put in .text when relocating | |
9 | # OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ... | |
10 | # (e.g., .PARISC.global) | |
104d59d1 | 11 | # ATTRS_SECTIONS - at the end |
85fbca6a NC |
12 | # OTHER_SECTIONS - at the end |
13 | # EXECUTABLE_SYMBOLS - symbols that must be defined for an | |
14 | # executable (e.g., _DYNAMIC_LINK) | |
15 | # TEXT_START_SYMBOLS - symbols that appear at the start of the | |
16 | # .text section. | |
17 | # DATA_START_SYMBOLS - symbols that appear at the start of the | |
18 | # .data section. | |
19 | # OTHER_GOT_SYMBOLS - symbols defined just before .got. | |
20 | # OTHER_GOT_SECTIONS - sections just after .got. | |
21 | # OTHER_SDATA_SECTIONS - sections just after .sdata. | |
22 | # OTHER_BSS_SYMBOLS - symbols that appear at the start of the | |
23 | # .bss section besides __bss_start. | |
24 | # DATA_PLT - .plt should be in data segment, not text segment. | |
25 | # BSS_PLT - .plt should be in bss segment | |
26 | # TEXT_DYNAMIC - .dynamic in text segment, not data segment. | |
27 | # EMBEDDED - whether this is for an embedded system. | |
28 | # SHLIB_TEXT_START_ADDR - if set, add to SIZEOF_HEADERS to set | |
29 | # start address of shared library. | |
30 | # INPUT_FILES - INPUT command of files to always include | |
31 | # WRITABLE_RODATA - if set, the .rodata section should be writable | |
32 | # INIT_START, INIT_END - statements just before and just after | |
33 | # combination of .init sections. | |
34 | # FINI_START, FINI_END - statements just before and just after | |
35 | # combination of .fini sections. | |
36 | # STACK_ADDR - start of a .stack section. | |
827a1c67 | 37 | # OTHER_SYMBOLS - symbols to place right at the end of the script. |
85fbca6a NC |
38 | # |
39 | # When adding sections, do note that the names of some sections are used | |
40 | # when specifying the start address of the next. | |
41 | # | |
42 | ||
43 | # Many sections come in three flavours. There is the 'real' section, | |
44 | # like ".data". Then there are the per-procedure or per-variable | |
45 | # sections, generated by -ffunction-sections and -fdata-sections in GCC, | |
46 | # and useful for --gc-sections, which for a variable "foo" might be | |
47 | # ".data.foo". Then there are the linkonce sections, for which the linker | |
48 | # eliminates duplicates, which are named like ".gnu.linkonce.d.foo". | |
49 | # The exact correspondences are: | |
50 | # | |
51 | # Section Linkonce section | |
52 | # .text .gnu.linkonce.t.foo | |
53 | # .rodata .gnu.linkonce.r.foo | |
54 | # .data .gnu.linkonce.d.foo | |
55 | # .bss .gnu.linkonce.b.foo | |
56 | # .sdata .gnu.linkonce.s.foo | |
57 | # .sbss .gnu.linkonce.sb.foo | |
58 | # .sdata2 .gnu.linkonce.s2.foo | |
59 | # .sbss2 .gnu.linkonce.sb2.foo | |
60 | # .debug_info .gnu.linkonce.wi.foo | |
61 | # .tdata .gnu.linkonce.td.foo | |
62 | # .tbss .gnu.linkonce.tb.foo | |
63 | # | |
64 | # Each of these can also have corresponding .rel.* and .rela.* sections. | |
65 | ||
66 | test -z "$ENTRY" && ENTRY=_start | |
67 | test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT} | |
68 | test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT} | |
69 | if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi | |
70 | test -z "${ELFSIZE}" && ELFSIZE=32 | |
71 | test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8" | |
72 | test "$LD_FLAG" = "N" && DATA_ADDR=. | |
73 | test -n "$CREATE_SHLIB$CREATE_PIE" && test -n "$SHLIB_DATA_ADDR" && COMMONPAGESIZE="" | |
74 | test -z "$CREATE_SHLIB$CREATE_PIE" && test -n "$DATA_ADDR" && COMMONPAGESIZE="" | |
104d59d1 | 75 | test -z "$ATTRS_SECTIONS" && ATTRS_SECTIONS=".gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }" |
85fbca6a NC |
76 | DATA_SEGMENT_ALIGN="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))" |
77 | DATA_SEGMENT_END="" | |
78 | if test -n "${COMMONPAGESIZE}"; then | |
79 | DATA_SEGMENT_ALIGN="ALIGN (${SEGMENT_SIZE}) - ((${MAXPAGESIZE} - .) & (${MAXPAGESIZE} - 1)); . = DATA_SEGMENT_ALIGN (${MAXPAGESIZE}, ${COMMONPAGESIZE})" | |
80 | DATA_SEGMENT_END=". = DATA_SEGMENT_END (.);" | |
81 | fi | |
82 | INTERP=".interp ALIGN(4) : { *(.interp) }" | |
83 | PLT=".plt : { *(.plt) } :dynamic :dyn" | |
84 | DYNAMIC=".dynamic : { *(.dynamic) } :dynamic :dyn" | |
85 | RODATA=".rodata ALIGN(4) : { *(.rodata${RELOCATING+ .rodata.* .gnu.linkonce.r.*}) }" | |
43e56c34 | 86 | DISCARDED="/DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) *(.directive) *(.gnu.lto_*) }" |
ec2d9b29 | 87 | test -z "$GOT" && GOT=".got ${RELOCATING-0} : { *(.got.plt) *(.got) } :dynamic :dyn" |
3cff7cc7 JZ |
88 | INIT_ARRAY=".init_array ${RELOCATING-0} : |
89 | { | |
90 | ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__init_array_start = .);}} | |
91 | KEEP (*(SORT(.init_array.*))) | |
92 | KEEP (*(.init_array)) | |
93 | ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__init_array_end = .);}} | |
94 | }" | |
95 | FINI_ARRAY=".fini_array ${RELOCATING-0} : | |
96 | { | |
97 | ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__fini_array_start = .);}} | |
98 | KEEP (*(SORT(.fini_array.*))) | |
99 | KEEP (*(.fini_array)) | |
100 | ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__fini_array_end = .);}} | |
101 | }" | |
85fbca6a NC |
102 | CTOR=".ctors ALIGN(4) : |
103 | { | |
104 | ${CONSTRUCTING+${CTOR_START}} | |
105 | /* gcc uses crtbegin.o to find the start of | |
106 | the constructors, so we make sure it is | |
107 | first. Because this is a wildcard, it | |
108 | doesn't matter if the user does not | |
109 | actually link against crtbegin.o; the | |
110 | linker won't look for a file to match a | |
111 | wildcard. The wildcard also means that it | |
112 | doesn't matter which directory crtbegin.o | |
113 | is in. */ | |
114 | ||
40cf2291 AM |
115 | KEEP (*crtbegin.o(.ctors)) |
116 | KEEP (*crtbegin?.o(.ctors)) | |
85fbca6a NC |
117 | |
118 | /* We don't want to include the .ctor section from | |
bd6791bc | 119 | the crtend.o file until after the sorted ctors. |
85fbca6a NC |
120 | The .ctor section from the crtend file contains the |
121 | end of ctors marker and it must be last */ | |
122 | ||
40cf2291 | 123 | KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .ctors)) |
85fbca6a NC |
124 | KEEP (*(SORT(.ctors.*))) |
125 | KEEP (*(.ctors)) | |
126 | ${CONSTRUCTING+${CTOR_END}} | |
127 | } :text" | |
128 | DTOR=".dtors ALIGN(4) : | |
129 | { | |
130 | ${CONSTRUCTING+${DTOR_START}} | |
40cf2291 AM |
131 | KEEP (*crtbegin.o(.dtors)) |
132 | KEEP (*crtbegin?.o(.dtors)) | |
133 | KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .dtors)) | |
85fbca6a NC |
134 | KEEP (*(SORT(.dtors.*))) |
135 | KEEP (*(.dtors)) | |
136 | ${CONSTRUCTING+${DTOR_END}} | |
137 | } :text" | |
ec2d9b29 | 138 | STACK=" .stack ${RELOCATING-0}${RELOCATING+${STACK_ADDR}} : |
85fbca6a NC |
139 | { |
140 | ${RELOCATING+_stack = .;} | |
141 | *(.stack) | |
142 | } :data" | |
143 | ||
144 | # if this is for an embedded system, don't add SIZEOF_HEADERS. | |
145 | if [ -z "$EMBEDDED" ]; then | |
146 | test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR} + SIZEOF_HEADERS" | |
147 | else | |
148 | test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR}" | |
149 | fi | |
150 | ||
151 | cat <<EOF | |
152 | OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}", | |
153 | "${LITTLE_OUTPUT_FORMAT}") | |
154 | OUTPUT_ARCH(${OUTPUT_ARCH}) | |
b34c1498 | 155 | ${RELOCATING+ENTRY(${ENTRY})} |
85fbca6a NC |
156 | |
157 | ${RELOCATING+${LIB_SEARCH_DIRS}} | |
158 | ${RELOCATING+/* Do we need any of these for elf? | |
159 | __DYNAMIC = 0; ${STACKZERO+${STACKZERO}} ${SHLIB_PATH+${SHLIB_PATH}} */} | |
160 | ${RELOCATING+${EXECUTABLE_SYMBOLS}} | |
161 | ${RELOCATING+${INPUT_FILES}} | |
ec2d9b29 AM |
162 | ${RELOCATING- /* For some reason, the Solaris linker makes bad executables |
163 | if gld -r is used and the intermediate file has sections starting | |
164 | at non-zero addresses. Could be a Solaris ld bug, could be a GNU ld | |
165 | bug. But for now assigning the zero vmas works. */} | |
85fbca6a NC |
166 | |
167 | PHDRS | |
168 | { | |
169 | headers PT_PHDR PHDRS ; | |
170 | text PT_LOAD ; | |
171 | data PT_LOAD ; | |
172 | dyn PT_LOAD FLAGS (0) ; | |
173 | dynamic PT_DYNAMIC ; | |
174 | } | |
175 | ||
176 | SECTIONS | |
177 | { | |
178 | /* Read-only sections, merged into text segment: */ | |
179 | ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+. = ${TEXT_BASE_ADDRESS};}}} | |
180 | ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0};}} | |
181 | ${CREATE_PIE+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0};}} | |
182 | ${CREATE_SHLIB-${INTERP}} | |
183 | ||
184 | ${INITIAL_READONLY_SECTIONS} | |
185 | ||
186 | .init ALIGN(4) : | |
187 | { | |
188 | ${RELOCATING+${INIT_START}} | |
189 | KEEP (*(.init)) | |
190 | ${RELOCATING+${INIT_END}} | |
191 | } :text =${NOP-0} | |
192 | ||
193 | .text ALIGN(4) : | |
194 | { | |
195 | ${RELOCATING+${TEXT_START_SYMBOLS}} | |
196 | *(.text .stub${RELOCATING+ .text.* .gnu.linkonce.t.*}) | |
197 | /* .gnu.warning sections are handled specially by elf32.em. */ | |
198 | *(.gnu.warning) | |
199 | ${RELOCATING+${OTHER_TEXT_SECTIONS}} | |
200 | } =${NOP-0} | |
201 | ||
202 | ${RELOCATING+${CTOR}} | |
203 | ${RELOCATING+${DTOR}} | |
204 | ||
205 | .fini ALIGN(4) : | |
206 | { | |
207 | ${RELOCATING+${FINI_START}} | |
208 | KEEP (*(.fini)) | |
209 | ${RELOCATING+${FINI_END}} | |
210 | } =${NOP-0} | |
211 | ||
212 | ${RELOCATING+PROVIDE (__etext = .);} | |
213 | ${RELOCATING+PROVIDE (_etext = .);} | |
214 | ${RELOCATING+PROVIDE (etext = .);} | |
215 | ||
216 | ${WRITABLE_RODATA-${RODATA}} | |
217 | .rodata1 ALIGN(4) : { *(.rodata1) } | |
218 | ||
219 | ExportTable ALIGN(4) : { KEEP (*(ExportTable)) } | |
220 | .eh_frame_hdr ALIGN(4) : { *(.eh_frame_hdr) } :text | |
221 | ||
222 | /* Adjust the address for the data segment. We want to adjust up to | |
223 | the same address within the page on the next page up. */ | |
224 | . = ALIGN(128) + (. & (128 - 1)); | |
ec2d9b29 | 225 | .preinit_array ${RELOCATING-0} : |
6f2942ed PB |
226 | { |
227 | ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__preinit_array_start = .);}} | |
228 | KEEP (*(.preinit_array)) | |
229 | ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__preinit_array_end = .);}} | |
230 | } | |
3cff7cc7 JZ |
231 | ${RELOCATING+${INIT_ARRAY}} |
232 | ${RELOCATING+${FINI_ARRAY}} | |
85fbca6a NC |
233 | |
234 | ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+. = ${DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}} | |
235 | ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}} | |
236 | ${CREATE_PIE+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}} | |
237 | ||
238 | .data ALIGN(4) : | |
239 | { | |
240 | ${RELOCATING+${DATA_START_SYMBOLS}} | |
241 | *(.data${RELOCATING+ .data.* .gnu.linkonce.d.*}) | |
242 | ${CONSTRUCTING+SORT(CONSTRUCTORS)} | |
243 | } :data | |
244 | ||
245 | .data1 ALIGN(4) : { *(.data1) } :data | |
246 | .tdata ALIGN(4) : { *(.tdata${RELOCATING+ .tdata.* .gnu.linkonce.td.*}) } :data | |
247 | .tbss ALIGN(4) : { *(.tbss${RELOCATING+ .tbss.* .gnu.linkonce.tb.*})${RELOCATING+ *(.tcommon)} } :data | |
248 | .eh_frame ALIGN(4) : { KEEP (*(.eh_frame)) } :data | |
249 | .gcc_except_table ALIGN(4) : { *(.gcc_except_table) } :data | |
250 | ${WRITABLE_RODATA+${RODATA}} | |
251 | ${OTHER_READWRITE_SECTIONS} | |
252 | ${SDATA} | |
253 | ${OTHER_SDATA_SECTIONS} | |
254 | ${RELOCATING+_edata = .;} | |
255 | ${RELOCATING+PROVIDE (edata = .);} | |
256 | ${RELOCATING+__bss_start = .;} | |
257 | ${RELOCATING+${OTHER_BSS_SYMBOLS}} | |
258 | ${BSS_PLT+${PLT}} | |
259 | .bss ALIGN(4) : | |
260 | { | |
261 | *(.dynbss) | |
262 | *(.bss${RELOCATING+ .bss.* .gnu.linkonce.b.*}) | |
263 | *(COMMON) | |
264 | /* Align here to ensure that the .bss section occupies space up to | |
265 | _end. Align after .bss to ensure correct alignment even if the | |
266 | .bss section disappears because there are no input sections. */ | |
267 | ${RELOCATING+. = ALIGN(${ALIGNMENT});} | |
268 | } :data | |
827a1c67 | 269 | ${RELOCATING+${OTHER_BSS_END_SYMBOLS}} |
85fbca6a | 270 | ${RELOCATING+. = ALIGN(${ALIGNMENT});} |
9f4fb502 | 271 | ${RELOCATING+${OTHER_END_SYMBOLS}} |
827a1c67 | 272 | ${RELOCATING+_end = .;} |
85fbca6a NC |
273 | ${RELOCATING+PROVIDE (end = .);} |
274 | ${RELOCATING+${DATA_SEGMENT_END}} | |
275 | ||
276 | ${TEXT_DYNAMIC-${DYNAMIC}} | |
277 | ${TEXT_DYNAMIC+${DYNAMIC}} | |
ec2d9b29 AM |
278 | .hash ${RELOCATING-0} : { *(.hash) } :dynamic :dyn |
279 | .dynsym ${RELOCATING-0} : { *(.dynsym) } :dynamic :dyn | |
280 | .dynstr ${RELOCATING-0} : { *(.dynstr) } :dynamic :dyn | |
85fbca6a NC |
281 | ${DATA_PLT-${BSS_PLT-${PLT}}} |
282 | .got.plt : { *(.got.plt) } :dynamic :dyn | |
ec2d9b29 AM |
283 | .gnu.version ${RELOCATING-0} : { *(.gnu.version) } |
284 | .gnu.version_d ${RELOCATING-0}: { *(.gnu.version_d) } | |
285 | .gnu.version_r ${RELOCATING-0}: { *(.gnu.version_r) } | |
85fbca6a NC |
286 | EOF |
287 | if [ "x$COMBRELOC" = x ]; then | |
288 | COMBRELOCCAT=cat | |
289 | else | |
290 | COMBRELOCCAT="cat > $COMBRELOC" | |
291 | fi | |
292 | eval $COMBRELOCCAT <<EOF | |
ec2d9b29 AM |
293 | .rel.init ${RELOCATING-0} : { *(.rel.init) } |
294 | .rela.init ${RELOCATING-0} : { *(.rela.init) } | |
295 | .rel.text ${RELOCATING-0} : { *(.rel.text${RELOCATING+ .rel.text.* .rel.gnu.linkonce.t.*}) } | |
296 | .rela.text ${RELOCATING-0} : { *(.rela.text${RELOCATING+ .rela.text.* .rela.gnu.linkonce.t.*}) } | |
297 | .rel.fini ${RELOCATING-0} : { *(.rel.fini) } | |
298 | .rela.fini ${RELOCATING-0} : { *(.rela.fini) } | |
299 | .rel.rodata ${RELOCATING-0} : { *(.rel.rodata${RELOCATING+ .rel.rodata.* .rel.gnu.linkonce.r.*}) } | |
300 | .rela.rodata ${RELOCATING-0} : { *(.rela.rodata${RELOCATING+ .rela.rodata.* .rela.gnu.linkonce.r.*}) } | |
85fbca6a | 301 | ${OTHER_READONLY_RELOC_SECTIONS} |
ec2d9b29 AM |
302 | .rel.data ${RELOCATING-0} : { *(.rel.data${RELOCATING+ .rel.data.* .rel.gnu.linkonce.d.*}) } |
303 | .rela.data ${RELOCATING-0} : { *(.rela.data${RELOCATING+ .rela.data.* .rela.gnu.linkonce.d.*}) } | |
304 | .rel.tdata ${RELOCATING-0} : { *(.rel.tdata${RELOCATING+ .rel.tdata.* .rel.gnu.linkonce.td.*}) } | |
305 | .rela.tdata ${RELOCATING-0} : { *(.rela.tdata${RELOCATING+ .rela.tdata.* .rela.gnu.linkonce.td.*}) } | |
306 | .rel.tbss ${RELOCATING-0} : { *(.rel.tbss${RELOCATING+ .rel.tbss.* .rel.gnu.linkonce.tb.*}) } | |
307 | .rela.tbss ${RELOCATING-0} : { *(.rela.tbss${RELOCATING+ .rela.tbss.* .rela.gnu.linkonce.tb.*}) } | |
308 | .rel.ctors ${RELOCATING-0} : { *(.rel.ctors) } | |
309 | .rela.ctors ${RELOCATING-0} : { *(.rela.ctors) } | |
310 | .rel.dtors ${RELOCATING-0} : { *(.rel.dtors) } | |
311 | .rela.dtors ${RELOCATING-0} : { *(.rela.dtors) } | |
312 | .rel.got ${RELOCATING-0} : { *(.rel.got) } | |
313 | .rela.got ${RELOCATING-0} : { *(.rela.got) } | |
85fbca6a | 314 | ${OTHER_GOT_RELOC_SECTIONS} |
ec2d9b29 AM |
315 | .rel.bss ${RELOCATING-0} : { *(.rel.bss${RELOCATING+ .rel.bss.* .rel.gnu.linkonce.b.*}) } |
316 | .rela.bss ${RELOCATING-0} : { *(.rela.bss${RELOCATING+ .rela.bss.* .rela.gnu.linkonce.b.*}) } | |
85fbca6a NC |
317 | EOF |
318 | if [ -n "$COMBRELOC" ]; then | |
319 | cat <<EOF | |
ec2d9b29 | 320 | .rel.dyn ${RELOCATING-0} : |
85fbca6a NC |
321 | { |
322 | EOF | |
323 | sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rela\./d;s/^.*: { *\(.*\)}$/ \1/' $COMBRELOC | |
324 | cat <<EOF | |
325 | } | |
ec2d9b29 | 326 | .rela.dyn ${RELOCATING-0} : |
85fbca6a NC |
327 | { |
328 | EOF | |
329 | sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rel\./d;s/^.*: { *\(.*\)}/ \1/' $COMBRELOC | |
330 | cat <<EOF | |
331 | } | |
332 | EOF | |
333 | fi | |
334 | cat <<EOF | |
ec2d9b29 AM |
335 | .rel.plt ${RELOCATING-0} : { *(.rel.plt) } |
336 | .rela.plt ${RELOCATING-0} : { *(.rela.plt) } | |
85fbca6a NC |
337 | ${OTHER_PLT_RELOC_SECTIONS} |
338 | ||
339 | ||
340 | /* Stabs debugging sections. */ | |
341 | .stab 0 : { *(.stab) } | |
342 | .stabstr 0 : { *(.stabstr) } | |
343 | .stab.excl 0 : { *(.stab.excl) } | |
344 | .stab.exclstr 0 : { *(.stab.exclstr) } | |
345 | .stab.index 0 : { *(.stab.index) } | |
346 | .stab.indexstr 0 : { *(.stab.indexstr) } | |
347 | ||
348 | .comment 0 : { *(.comment) } | |
349 | ||
350 | /* DWARF debug sections. | |
351 | Symbols in the DWARF debugging sections are relative to the beginning | |
352 | of the section so we begin them at 0. */ | |
353 | ||
354 | /* DWARF 1 */ | |
355 | .debug 0 : { *(.debug) } | |
356 | .line 0 : { *(.line) } | |
357 | ||
358 | /* GNU DWARF 1 extensions */ | |
359 | .debug_srcinfo 0 : { *(.debug_srcinfo) } | |
360 | .debug_sfnames 0 : { *(.debug_sfnames) } | |
361 | ||
362 | /* DWARF 1.1 and DWARF 2 */ | |
363 | .debug_aranges 0 : { *(.debug_aranges) } | |
364 | .debug_pubnames 0 : { *(.debug_pubnames) } | |
365 | ||
366 | /* DWARF 2 */ | |
367 | .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) } | |
368 | .debug_abbrev 0 : { *(.debug_abbrev) } | |
369 | .debug_line 0 : { *(.debug_line) } | |
370 | .debug_frame 0 : { *(.debug_frame) } | |
371 | .debug_str 0 : { *(.debug_str) } | |
372 | .debug_loc 0 : { *(.debug_loc) } | |
373 | .debug_macinfo 0 : { *(.debug_macinfo) } | |
374 | ||
375 | /* SGI/MIPS DWARF 2 extensions */ | |
376 | .debug_weaknames 0 : { *(.debug_weaknames) } | |
377 | .debug_funcnames 0 : { *(.debug_funcnames) } | |
378 | .debug_typenames 0 : { *(.debug_typenames) } | |
379 | .debug_varnames 0 : { *(.debug_varnames) } | |
380 | ||
381 | ${STACK_ADDR+${STACK}} | |
104d59d1 | 382 | ${ATTRS_SECTIONS} |
85fbca6a | 383 | ${OTHER_SECTIONS} |
827a1c67 | 384 | ${RELOCATING+${OTHER_SYMBOLS}} |
1c68693b | 385 | ${RELOCATING+${DISCARDED}} |
85fbca6a NC |
386 | } |
387 | EOF |