Commit | Line | Data |
---|---|---|
e0001a05 NC |
1 | # |
2 | # Unusual variables checked by this code: | |
3 | # NOP - four byte opcode for no-op (defaults to 0) | |
4 | # NO_SMALL_DATA - no .sbss/.sbss2/.sdata/.sdata2 sections if not | |
5 | # empty. | |
be2c2e39 BW |
6 | # SMALL_DATA_CTOR - .ctors contains small data. |
7 | # SMALL_DATA_DTOR - .dtors contains small data. | |
e0001a05 NC |
8 | # DATA_ADDR - if end-of-text-plus-one-page isn't right for data start |
9 | # INITIAL_READONLY_SECTIONS - at start of text segment | |
10 | # OTHER_READONLY_SECTIONS - other than .text .init .rodata ... | |
11 | # (e.g., .PARISC.milli) | |
12 | # OTHER_TEXT_SECTIONS - these get put in .text when relocating | |
13 | # OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ... | |
14 | # (e.g., .PARISC.global) | |
43cd72b9 BW |
15 | # OTHER_RELRO_SECTIONS - other than .data.rel.ro ... |
16 | # (e.g. PPC32 .fixup, .got[12]) | |
93c0f4a4 | 17 | # OTHER_BSS_SECTIONS - other than .bss .sbss ... |
104d59d1 | 18 | # ATTRS_SECTIONS - at the end |
e0001a05 NC |
19 | # OTHER_SECTIONS - at the end |
20 | # EXECUTABLE_SYMBOLS - symbols that must be defined for an | |
21 | # executable (e.g., _DYNAMIC_LINK) | |
be2c2e39 BW |
22 | # TEXT_START_ADDR - the first byte of the text segment, after any |
23 | # headers. | |
24 | # TEXT_BASE_ADDRESS - the first byte of the text segment. | |
e0001a05 NC |
25 | # TEXT_START_SYMBOLS - symbols that appear at the start of the |
26 | # .text section. | |
27 | # DATA_START_SYMBOLS - symbols that appear at the start of the | |
28 | # .data section. | |
be2c2e39 BW |
29 | # DATA_END_SYMBOLS - symbols that appear at the end of the |
30 | # writeable data sections. | |
e0001a05 NC |
31 | # OTHER_GOT_SYMBOLS - symbols defined just before .got. |
32 | # OTHER_GOT_SECTIONS - sections just after .got. | |
33 | # OTHER_SDATA_SECTIONS - sections just after .sdata. | |
34 | # OTHER_BSS_SYMBOLS - symbols that appear at the start of the | |
35 | # .bss section besides __bss_start. | |
be2c2e39 BW |
36 | # DATA_PLT - .plt should be in data segment, not text segment. |
37 | # PLT_BEFORE_GOT - .plt just before .got when .plt is in data segement. | |
38 | # BSS_PLT - .plt should be in bss segment | |
e78c4c7e BW |
39 | # NO_REL_RELOCS - Don't include .rel.* sections in script |
40 | # NO_RELA_RELOCS - Don't include .rela.* sections in script | |
41 | # NON_ALLOC_DYN - Place dynamic sections after data segment. | |
e0001a05 NC |
42 | # TEXT_DYNAMIC - .dynamic in text segment, not data segment. |
43 | # EMBEDDED - whether this is for an embedded system. | |
44 | # SHLIB_TEXT_START_ADDR - if set, add to SIZEOF_HEADERS to set | |
45 | # start address of shared library. | |
46 | # INPUT_FILES - INPUT command of files to always include | |
47 | # WRITABLE_RODATA - if set, the .rodata section should be writable | |
48 | # INIT_START, INIT_END - statements just before and just after | |
49 | # combination of .init sections. | |
50 | # FINI_START, FINI_END - statements just before and just after | |
51 | # combination of .fini sections. | |
52 | # STACK_ADDR - start of a .stack section. | |
827a1c67 | 53 | # OTHER_SYMBOLS - symbols to place right at the end of the script. |
be2c2e39 BW |
54 | # ETEXT_NAME - name of a symbol for the end of the text section, |
55 | # normally etext. | |
56 | # SEPARATE_GOTPLT - if set, .got.plt should be separate output section, | |
57 | # so that .got can be in the RELRO area. It should be set to | |
58 | # the number of bytes in the beginning of .got.plt which can be | |
59 | # in the RELRO area as well. | |
3c173cb1 | 60 | # USER_LABEL_PREFIX - prefix to add to user-visible symbols. |
e0001a05 NC |
61 | # |
62 | # When adding sections, do note that the names of some sections are used | |
63 | # when specifying the start address of the next. | |
64 | # | |
65 | ||
66 | # Many sections come in three flavours. There is the 'real' section, | |
67 | # like ".data". Then there are the per-procedure or per-variable | |
68 | # sections, generated by -ffunction-sections and -fdata-sections in GCC, | |
69 | # and useful for --gc-sections, which for a variable "foo" might be | |
70 | # ".data.foo". Then there are the linkonce sections, for which the linker | |
71 | # eliminates duplicates, which are named like ".gnu.linkonce.d.foo". | |
72 | # The exact correspondences are: | |
73 | # | |
74 | # Section Linkonce section | |
75 | # .text .gnu.linkonce.t.foo | |
76 | # .rodata .gnu.linkonce.r.foo | |
77 | # .data .gnu.linkonce.d.foo | |
78 | # .bss .gnu.linkonce.b.foo | |
79 | # .sdata .gnu.linkonce.s.foo | |
80 | # .sbss .gnu.linkonce.sb.foo | |
81 | # .sdata2 .gnu.linkonce.s2.foo | |
82 | # .sbss2 .gnu.linkonce.sb2.foo | |
83 | # .debug_info .gnu.linkonce.wi.foo | |
84 | # .tdata .gnu.linkonce.td.foo | |
85 | # .tbss .gnu.linkonce.tb.foo | |
3c173cb1 BW |
86 | # .lrodata .gnu.linkonce.lr.foo |
87 | # .ldata .gnu.linkonce.l.foo | |
88 | # .lbss .gnu.linkonce.lb.foo | |
89 | # | |
90 | # plus exception-handling information for Tensilica's XCC compiler: | |
91 | # .xt_except_table .gnu.linkonce.e.foo | |
92 | # .xt_except_desc .gnu.linkonce.h.foo | |
93 | # | |
94 | # plus Xtensa-specific literal sections: | |
95 | # .literal .gnu.linkonce.literal.foo | |
96 | # .lit4 .gnu.linkonce.lit4.foo | |
97 | # | |
98 | # plus Xtensa-specific "property table" sections: | |
99 | # .xt.lit .gnu.linkonce.p.foo | |
100 | # .xt.insn .gnu.linkonce.x.foo (obsolete) | |
101 | # .xt.prop .gnu.linkonce.prop.foo | |
e0001a05 NC |
102 | # |
103 | # Each of these can also have corresponding .rel.* and .rela.* sections. | |
104 | ||
105 | test -z "$ENTRY" && ENTRY=_start | |
be2c2e39 BW |
106 | test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT} |
107 | test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT} | |
108 | if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi | |
e0001a05 NC |
109 | test -z "${ELFSIZE}" && ELFSIZE=32 |
110 | test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8" | |
111 | test "$LD_FLAG" = "N" && DATA_ADDR=. | |
be2c2e39 | 112 | test -z "${ETEXT_NAME}" && ETEXT_NAME=etext |
43cd72b9 BW |
113 | test -n "$CREATE_SHLIB$CREATE_PIE" && test -n "$SHLIB_DATA_ADDR" && COMMONPAGESIZE="" |
114 | test -z "$CREATE_SHLIB$CREATE_PIE" && test -n "$DATA_ADDR" && COMMONPAGESIZE="" | |
be2c2e39 | 115 | test -n "$RELRO_NOW" && unset SEPARATE_GOTPLT |
104d59d1 | 116 | test -z "$ATTRS_SECTIONS" && ATTRS_SECTIONS=".gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }" |
e0001a05 | 117 | DATA_SEGMENT_ALIGN="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))" |
43cd72b9 | 118 | DATA_SEGMENT_RELRO_END="" |
e0001a05 NC |
119 | DATA_SEGMENT_END="" |
120 | if test -n "${COMMONPAGESIZE}"; then | |
121 | DATA_SEGMENT_ALIGN="ALIGN (${SEGMENT_SIZE}) - ((${MAXPAGESIZE} - .) & (${MAXPAGESIZE} - 1)); . = DATA_SEGMENT_ALIGN (${MAXPAGESIZE}, ${COMMONPAGESIZE})" | |
122 | DATA_SEGMENT_END=". = DATA_SEGMENT_END (.);" | |
be2c2e39 | 123 | DATA_SEGMENT_RELRO_END=". = DATA_SEGMENT_RELRO_END (${SEPARATE_GOTPLT-0}, .);" |
e0001a05 | 124 | fi |
93c0f4a4 | 125 | if test -z "${INITIAL_READONLY_SECTIONS}${CREATE_SHLIB}"; then |
ec2d9b29 | 126 | INITIAL_READONLY_SECTIONS=".interp ${RELOCATING-0} : { *(.interp) }" |
93c0f4a4 | 127 | fi |
be2c2e39 | 128 | if test -z "$PLT"; then |
ec2d9b29 | 129 | PLT=".plt ${RELOCATING-0} : { *(.plt) }" |
be2c2e39 | 130 | fi |
3c173cb1 | 131 | test -n "${DATA_PLT-${BSS_PLT-text}}" && TEXT_PLT=yes |
43cd72b9 | 132 | if test -z "$GOT"; then |
be2c2e39 | 133 | if test -z "$SEPARATE_GOTPLT"; then |
ec2d9b29 | 134 | GOT=".got ${RELOCATING-0} : { *(.got.plt) *(.got) }" |
be2c2e39 | 135 | else |
ec2d9b29 AM |
136 | GOT=".got ${RELOCATING-0} : { *(.got) }" |
137 | GOTPLT=".got.plt ${RELOCATING-0} : { *(.got.plt) }" | |
be2c2e39 | 138 | fi |
43cd72b9 | 139 | fi |
ec2d9b29 AM |
140 | DYNAMIC=".dynamic ${RELOCATING-0} : { *(.dynamic) }" |
141 | RODATA=".rodata ${RELOCATING-0} : { *(.rodata${RELOCATING+ .rodata.* .gnu.linkonce.r.*}) }" | |
18bbc1c5 | 142 | DATARELRO=".data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro .data.rel.ro.* .gnu.linkonce.d.rel.ro.*) }" |
43e56c34 | 143 | DISCARDED="/DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) *(.gnu.lto_*) }" |
ec2d9b29 AM |
144 | INIT_LIT=".init.literal 0 : { *(.init.literal) }" |
145 | INIT=".init 0 : { *(.init) }" | |
146 | FINI_LIT=".fini.literal 0 : { *(.fini.literal) }" | |
147 | FINI=".fini 0 : { *(.fini) }" | |
e0001a05 | 148 | if test -z "${NO_SMALL_DATA}"; then |
ec2d9b29 | 149 | SBSS=".sbss ${RELOCATING-0} : |
e0001a05 | 150 | { |
3c173cb1 | 151 | ${RELOCATING+${SBSS_START_SYMBOLS}} |
be2c2e39 | 152 | ${CREATE_SHLIB+*(.sbss2 .sbss2.* .gnu.linkonce.sb2.*)} |
e0001a05 NC |
153 | *(.dynsbss) |
154 | *(.sbss${RELOCATING+ .sbss.* .gnu.linkonce.sb.*}) | |
155 | *(.scommon) | |
3c173cb1 | 156 | ${RELOCATING+${SBSS_END_SYMBOLS}} |
e0001a05 | 157 | }" |
ec2d9b29 | 158 | SBSS2=".sbss2 ${RELOCATING-0} : { *(.sbss2${RELOCATING+ .sbss2.* .gnu.linkonce.sb2.*}) }" |
e0001a05 NC |
159 | SDATA="/* We want the small data sections together, so single-instruction offsets |
160 | can access them all, and initialized data all before uninitialized, so | |
161 | we can shorten the on-disk segment size. */ | |
ec2d9b29 | 162 | .sdata ${RELOCATING-0} : |
e0001a05 NC |
163 | { |
164 | ${RELOCATING+${SDATA_START_SYMBOLS}} | |
be2c2e39 | 165 | ${CREATE_SHLIB+*(.sdata2 .sdata2.* .gnu.linkonce.s2.*)} |
e0001a05 NC |
166 | *(.sdata${RELOCATING+ .sdata.* .gnu.linkonce.s.*}) |
167 | }" | |
ec2d9b29 | 168 | SDATA2=".sdata2 ${RELOCATING-0} : |
3c173cb1 BW |
169 | { |
170 | ${RELOCATING+${SDATA2_START_SYMBOLS}} | |
171 | *(.sdata2${RELOCATING+ .sdata2.* .gnu.linkonce.s2.*}) | |
172 | }" | |
ec2d9b29 AM |
173 | REL_SDATA=".rel.sdata ${RELOCATING-0} : { *(.rel.sdata${RELOCATING+ .rel.sdata.* .rel.gnu.linkonce.s.*}) } |
174 | .rela.sdata ${RELOCATING-0} : { *(.rela.sdata${RELOCATING+ .rela.sdata.* .rela.gnu.linkonce.s.*}) }" | |
175 | REL_SBSS=".rel.sbss ${RELOCATING-0} : { *(.rel.sbss${RELOCATING+ .rel.sbss.* .rel.gnu.linkonce.sb.*}) } | |
176 | .rela.sbss ${RELOCATING-0} : { *(.rela.sbss${RELOCATING+ .rela.sbss.* .rela.gnu.linkonce.sb.*}) }" | |
177 | REL_SDATA2=".rel.sdata2 ${RELOCATING-0} : { *(.rel.sdata2${RELOCATING+ .rel.sdata2.* .rel.gnu.linkonce.s2.*}) } | |
178 | .rela.sdata2 ${RELOCATING-0} : { *(.rela.sdata2${RELOCATING+ .rela.sdata2.* .rela.gnu.linkonce.s2.*}) }" | |
179 | REL_SBSS2=".rel.sbss2 ${RELOCATING-0} : { *(.rel.sbss2${RELOCATING+ .rel.sbss2.* .rel.gnu.linkonce.sb2.*}) } | |
180 | .rela.sbss2 ${RELOCATING-0} : { *(.rela.sbss2${RELOCATING+ .rela.sbss2.* .rela.gnu.linkonce.sb2.*}) }" | |
43cd72b9 BW |
181 | else |
182 | NO_SMALL_DATA=" " | |
e0001a05 | 183 | fi |
be2c2e39 BW |
184 | if test -z "${DATA_GOT}"; then |
185 | if test -n "${NO_SMALL_DATA}"; then | |
186 | DATA_GOT=" " | |
187 | fi | |
188 | fi | |
189 | if test -z "${SDATA_GOT}"; then | |
190 | if test -z "${NO_SMALL_DATA}"; then | |
191 | SDATA_GOT=" " | |
192 | fi | |
193 | fi | |
194 | test -n "$SEPARATE_GOTPLT" && SEPARATE_GOTPLT=" " | |
3c173cb1 | 195 | test "${LARGE_SECTIONS}" = "yes" && REL_LARGE=" |
ec2d9b29 AM |
196 | .rel.ldata ${RELOCATING-0} : { *(.rel.ldata${RELOCATING+ .rel.ldata.* .rel.gnu.linkonce.l.*}) } |
197 | .rela.ldata ${RELOCATING-0} : { *(.rela.ldata${RELOCATING+ .rela.ldata.* .rela.gnu.linkonce.l.*}) } | |
198 | .rel.lbss ${RELOCATING-0} : { *(.rel.lbss${RELOCATING+ .rel.lbss.* .rel.gnu.linkonce.lb.*}) } | |
199 | .rela.lbss ${RELOCATING-0} : { *(.rela.lbss${RELOCATING+ .rela.lbss.* .rela.gnu.linkonce.lb.*}) } | |
200 | .rel.lrodata ${RELOCATING-0} : { *(.rel.lrodata${RELOCATING+ .rel.lrodata.* .rel.gnu.linkonce.lr.*}) } | |
201 | .rela.lrodata ${RELOCATING-0} : { *(.rela.lrodata${RELOCATING+ .rela.lrodata.* .rela.gnu.linkonce.lr.*}) }" | |
93c0f4a4 BW |
202 | test "${LARGE_SECTIONS}" = "yes" && OTHER_BSS_SECTIONS=" |
203 | ${OTHER_BSS_SECTIONS} | |
ec2d9b29 | 204 | .lbss ${RELOCATING-0} : |
3c173cb1 BW |
205 | { |
206 | *(.dynlbss) | |
207 | *(.lbss${RELOCATING+ .lbss.* .gnu.linkonce.lb.*}) | |
208 | *(LARGE_COMMON) | |
93c0f4a4 BW |
209 | }" |
210 | test "${LARGE_SECTIONS}" = "yes" && LARGE_SECTIONS=" | |
ec2d9b29 | 211 | .lrodata ${RELOCATING-0} ${RELOCATING+ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))} : |
3c173cb1 BW |
212 | { |
213 | *(.lrodata${RELOCATING+ .lrodata.* .gnu.linkonce.lr.*}) | |
214 | } | |
ec2d9b29 | 215 | .ldata ${RELOCATING-0} ${RELOCATING+ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))} : |
3c173cb1 BW |
216 | { |
217 | *(.ldata${RELOCATING+ .ldata.* .gnu.linkonce.l.*}) | |
218 | ${RELOCATING+. = ALIGN(. != 0 ? ${ALIGNMENT} : 1);} | |
219 | }" | |
3cff7cc7 JZ |
220 | INIT_ARRAY=".init_array ${RELOCATING-0} : |
221 | { | |
222 | ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__init_array_start = .);}} | |
223 | KEEP (*(SORT(.init_array.*))) | |
224 | KEEP (*(.init_array)) | |
225 | ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__init_array_end = .);}} | |
226 | }" | |
227 | FINI_ARRAY=".fini_array ${RELOCATING-0} : | |
228 | { | |
229 | ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__fini_array_start = .);}} | |
230 | KEEP (*(SORT(.fini_array.*))) | |
231 | KEEP (*(.fini_array)) | |
232 | ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__fini_array_end = .);}} | |
233 | }" | |
ec2d9b29 | 234 | CTOR=".ctors ${CONSTRUCTING-0} : |
e0001a05 NC |
235 | { |
236 | ${CONSTRUCTING+${CTOR_START}} | |
237 | /* gcc uses crtbegin.o to find the start of | |
238 | the constructors, so we make sure it is | |
239 | first. Because this is a wildcard, it | |
240 | doesn't matter if the user does not | |
241 | actually link against crtbegin.o; the | |
242 | linker won't look for a file to match a | |
243 | wildcard. The wildcard also means that it | |
244 | doesn't matter which directory crtbegin.o | |
245 | is in. */ | |
246 | ||
40cf2291 AM |
247 | KEEP (*crtbegin.o(.ctors)) |
248 | KEEP (*crtbegin?.o(.ctors)) | |
e0001a05 NC |
249 | |
250 | /* We don't want to include the .ctor section from | |
bd6791bc | 251 | the crtend.o file until after the sorted ctors. |
e0001a05 NC |
252 | The .ctor section from the crtend file contains the |
253 | end of ctors marker and it must be last */ | |
254 | ||
40cf2291 | 255 | KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .ctors)) |
e0001a05 NC |
256 | KEEP (*(SORT(.ctors.*))) |
257 | KEEP (*(.ctors)) | |
258 | ${CONSTRUCTING+${CTOR_END}} | |
259 | }" | |
ec2d9b29 | 260 | DTOR=".dtors ${CONSTRUCTING-0} : |
e0001a05 NC |
261 | { |
262 | ${CONSTRUCTING+${DTOR_START}} | |
40cf2291 AM |
263 | KEEP (*crtbegin.o(.dtors)) |
264 | KEEP (*crtbegin?.o(.dtors)) | |
265 | KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .dtors)) | |
e0001a05 NC |
266 | KEEP (*(SORT(.dtors.*))) |
267 | KEEP (*(.dtors)) | |
268 | ${CONSTRUCTING+${DTOR_END}} | |
269 | }" | |
ec2d9b29 | 270 | STACK=" .stack ${RELOCATING-0}${RELOCATING+${STACK_ADDR}} : |
e0001a05 NC |
271 | { |
272 | ${RELOCATING+_stack = .;} | |
273 | *(.stack) | |
274 | }" | |
275 | ||
276 | # if this is for an embedded system, don't add SIZEOF_HEADERS. | |
277 | if [ -z "$EMBEDDED" ]; then | |
278 | test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR} + SIZEOF_HEADERS" | |
279 | else | |
280 | test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR}" | |
281 | fi | |
282 | ||
283 | cat <<EOF | |
c19f06f2 | 284 | ${RELOCATING+ENTRY(${ENTRY})} |
e0001a05 NC |
285 | |
286 | ${RELOCATING+${LIB_SEARCH_DIRS}} | |
e0001a05 NC |
287 | ${RELOCATING+${EXECUTABLE_SYMBOLS}} |
288 | ${RELOCATING+${INPUT_FILES}} | |
ec2d9b29 AM |
289 | ${RELOCATING- /* For some reason, the Solaris linker makes bad executables |
290 | if gld -r is used and the intermediate file has sections starting | |
291 | at non-zero addresses. Could be a Solaris ld bug, could be a GNU ld | |
292 | bug. But for now assigning the zero vmas works. */} | |
e0001a05 NC |
293 | |
294 | SECTIONS | |
295 | { | |
296 | /* Read-only sections, merged into text segment: */ | |
43cd72b9 | 297 | ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+PROVIDE (__executable_start = ${TEXT_START_ADDR}); . = ${TEXT_BASE_ADDRESS};}}} |
e0001a05 | 298 | ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}} |
43cd72b9 | 299 | ${CREATE_PIE+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}} |
e0001a05 | 300 | ${INITIAL_READONLY_SECTIONS} |
c19f06f2 | 301 | .note.gnu.build-id : { *(.note.gnu.build-id) } |
e78c4c7e BW |
302 | EOF |
303 | ||
304 | test -n "${RELOCATING+0}" || unset NON_ALLOC_DYN | |
305 | test -z "${NON_ALLOC_DYN}" || TEXT_DYNAMIC= | |
306 | cat > ldscripts/dyntmp.$$ <<EOF | |
e0001a05 | 307 | ${TEXT_DYNAMIC+${DYNAMIC}} |
ec2d9b29 AM |
308 | .hash ${RELOCATING-0} : { *(.hash) } |
309 | .gnu.hash ${RELOCATING-0} : { *(.gnu.hash) } | |
310 | .dynsym ${RELOCATING-0} : { *(.dynsym) } | |
311 | .dynstr ${RELOCATING-0} : { *(.dynstr) } | |
312 | .gnu.version ${RELOCATING-0} : { *(.gnu.version) } | |
313 | .gnu.version_d ${RELOCATING-0}: { *(.gnu.version_d) } | |
314 | .gnu.version_r ${RELOCATING-0}: { *(.gnu.version_r) } | |
e0001a05 | 315 | EOF |
e78c4c7e | 316 | |
e0001a05 | 317 | if [ "x$COMBRELOC" = x ]; then |
e78c4c7e | 318 | COMBRELOCCAT="cat >> ldscripts/dyntmp.$$" |
e0001a05 NC |
319 | else |
320 | COMBRELOCCAT="cat > $COMBRELOC" | |
321 | fi | |
322 | eval $COMBRELOCCAT <<EOF | |
ec2d9b29 AM |
323 | .rel.init ${RELOCATING-0} : { *(.rel.init) } |
324 | .rela.init ${RELOCATING-0} : { *(.rela.init) } | |
325 | .rel.text ${RELOCATING-0} : { *(.rel.text${RELOCATING+ .rel.text.* .rel.gnu.linkonce.t.*}) } | |
326 | .rela.text ${RELOCATING-0} : { *(.rela.text${RELOCATING+ .rela.text.* .rela.gnu.linkonce.t.*}) } | |
327 | .rel.fini ${RELOCATING-0} : { *(.rel.fini) } | |
328 | .rela.fini ${RELOCATING-0} : { *(.rela.fini) } | |
329 | .rel.rodata ${RELOCATING-0} : { *(.rel.rodata${RELOCATING+ .rel.rodata.* .rel.gnu.linkonce.r.*}) } | |
330 | .rela.rodata ${RELOCATING-0} : { *(.rela.rodata${RELOCATING+ .rela.rodata.* .rela.gnu.linkonce.r.*}) } | |
e0001a05 | 331 | ${OTHER_READONLY_RELOC_SECTIONS} |
18bbc1c5 CC |
332 | .rel.data.rel.ro ${RELOCATING-0} : { *(.rel.data.rel.ro${RELOCATING+ .rel.data.rel.ro.* .rel.gnu.linkonce.d.rel.ro.*}) } |
333 | .rela.data.rel.ro ${RELOCATING-0} : { *(.rela.data.rel.ro${RELOCATING+ .rela.data.rel.ro.* .rela.gnu.linkonce.d.rel.ro.*}) } | |
ec2d9b29 AM |
334 | .rel.data ${RELOCATING-0} : { *(.rel.data${RELOCATING+ .rel.data.* .rel.gnu.linkonce.d.*}) } |
335 | .rela.data ${RELOCATING-0} : { *(.rela.data${RELOCATING+ .rela.data.* .rela.gnu.linkonce.d.*}) } | |
336 | .rel.tdata ${RELOCATING-0} : { *(.rel.tdata${RELOCATING+ .rel.tdata.* .rel.gnu.linkonce.td.*}) } | |
337 | .rela.tdata ${RELOCATING-0} : { *(.rela.tdata${RELOCATING+ .rela.tdata.* .rela.gnu.linkonce.td.*}) } | |
338 | .rel.tbss ${RELOCATING-0} : { *(.rel.tbss${RELOCATING+ .rel.tbss.* .rel.gnu.linkonce.tb.*}) } | |
339 | .rela.tbss ${RELOCATING-0} : { *(.rela.tbss${RELOCATING+ .rela.tbss.* .rela.gnu.linkonce.tb.*}) } | |
340 | .rel.ctors ${RELOCATING-0} : { *(.rel.ctors) } | |
341 | .rela.ctors ${RELOCATING-0} : { *(.rela.ctors) } | |
342 | .rel.dtors ${RELOCATING-0} : { *(.rel.dtors) } | |
343 | .rela.dtors ${RELOCATING-0} : { *(.rela.dtors) } | |
344 | .rel.got ${RELOCATING-0} : { *(.rel.got) } | |
345 | .rela.got ${RELOCATING-0} : { *(.rela.got) } | |
e0001a05 NC |
346 | ${OTHER_GOT_RELOC_SECTIONS} |
347 | ${REL_SDATA} | |
348 | ${REL_SBSS} | |
349 | ${REL_SDATA2} | |
350 | ${REL_SBSS2} | |
ec2d9b29 AM |
351 | .rel.bss ${RELOCATING-0} : { *(.rel.bss${RELOCATING+ .rel.bss.* .rel.gnu.linkonce.b.*}) } |
352 | .rela.bss ${RELOCATING-0} : { *(.rela.bss${RELOCATING+ .rela.bss.* .rela.gnu.linkonce.b.*}) } | |
3c173cb1 | 353 | ${REL_LARGE} |
e0001a05 | 354 | EOF |
e78c4c7e | 355 | |
e0001a05 | 356 | if [ -n "$COMBRELOC" ]; then |
e78c4c7e | 357 | cat >> ldscripts/dyntmp.$$ <<EOF |
ec2d9b29 | 358 | .rel.dyn ${RELOCATING-0} : |
e0001a05 NC |
359 | { |
360 | EOF | |
e78c4c7e BW |
361 | sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rela\./d;s/^.*: { *\(.*\)}$/ \1/' $COMBRELOC >> ldscripts/dyntmp.$$ |
362 | cat >> ldscripts/dyntmp.$$ <<EOF | |
e0001a05 | 363 | } |
ec2d9b29 | 364 | .rela.dyn ${RELOCATING-0} : |
e0001a05 NC |
365 | { |
366 | EOF | |
e78c4c7e BW |
367 | sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rel\./d;s/^.*: { *\(.*\)}/ \1/' $COMBRELOC >> ldscripts/dyntmp.$$ |
368 | cat >> ldscripts/dyntmp.$$ <<EOF | |
e0001a05 NC |
369 | } |
370 | EOF | |
371 | fi | |
e78c4c7e BW |
372 | |
373 | cat >> ldscripts/dyntmp.$$ <<EOF | |
ec2d9b29 AM |
374 | .rel.plt ${RELOCATING-0} : { *(.rel.plt) } |
375 | .rela.plt ${RELOCATING-0} : { *(.rela.plt) } | |
e0001a05 | 376 | ${OTHER_PLT_RELOC_SECTIONS} |
e78c4c7e | 377 | EOF |
e0001a05 | 378 | |
e78c4c7e BW |
379 | if test -z "${NON_ALLOC_DYN}"; then |
380 | if test -z "${NO_REL_RELOCS}${NO_RELA_RELOCS}"; then | |
381 | cat ldscripts/dyntmp.$$ | |
382 | else | |
383 | if test -z "${NO_REL_RELOCS}"; then | |
384 | sed -e '/^[ ]*\.rela\.[^}]*$/,/}/d' -e '/^[ ]*\.rela\./d' ldscripts/dyntmp.$$ | |
385 | fi | |
386 | if test -z "${NO_RELA_RELOCS}"; then | |
387 | sed -e '/^[ ]*\.rel\.[^}]*$/,/}/d' -e '/^[ ]*\.rel\./d' ldscripts/dyntmp.$$ | |
388 | fi | |
389 | fi | |
390 | rm -f ldscripts/dyntmp.$$ | |
391 | fi | |
392 | ||
393 | cat <<EOF | |
e0001a05 NC |
394 | ${RELOCATING-$INIT_LIT} |
395 | ${RELOCATING-$INIT} | |
396 | ||
3c173cb1 BW |
397 | ${TEXT_PLT+${PLT}} |
398 | ${TINY_READONLY_SECTION} | |
ec2d9b29 | 399 | .text ${RELOCATING-0} : |
e0001a05 NC |
400 | { |
401 | *(.got.plt* .plt*) | |
402 | ||
403 | ${RELOCATING+${INIT_START}} | |
404 | ${RELOCATING+KEEP (*(.init.literal))} | |
405 | ${RELOCATING+KEEP (*(.init))} | |
406 | ${RELOCATING+${INIT_END}} | |
407 | ||
408 | ${RELOCATING+${TEXT_START_SYMBOLS}} | |
74869ac7 | 409 | *(.literal .text .stub${RELOCATING+ .literal.* .text.* .gnu.linkonce.literal.* .gnu.linkonce.t.*.literal .gnu.linkonce.t.*}) |
e0001a05 NC |
410 | /* .gnu.warning sections are handled specially by elf32.em. */ |
411 | *(.gnu.warning) | |
412 | ${RELOCATING+${OTHER_TEXT_SECTIONS}} | |
413 | ||
414 | ${RELOCATING+${FINI_START}} | |
415 | ${RELOCATING+KEEP (*(.fini.literal))} | |
416 | ${RELOCATING+KEEP (*(.fini))} | |
417 | ${RELOCATING+${FINI_END}} | |
418 | } =${NOP-0} | |
419 | ||
420 | ${RELOCATING-$FINI_LIT} | |
421 | ${RELOCATING-$FINI} | |
422 | ||
be2c2e39 BW |
423 | ${RELOCATING+PROVIDE (__${ETEXT_NAME} = .);} |
424 | ${RELOCATING+PROVIDE (_${ETEXT_NAME} = .);} | |
425 | ${RELOCATING+PROVIDE (${ETEXT_NAME} = .);} | |
e0001a05 | 426 | ${WRITABLE_RODATA-${RODATA}} |
ec2d9b29 | 427 | .rodata1 ${RELOCATING-0} : { *(.rodata1) } |
e0001a05 NC |
428 | ${CREATE_SHLIB-${SDATA2}} |
429 | ${CREATE_SHLIB-${SBSS2}} | |
430 | ${OTHER_READONLY_SECTIONS} | |
431 | .eh_frame_hdr : { *(.eh_frame_hdr) } | |
ec2d9b29 AM |
432 | .eh_frame ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.eh_frame)) } |
433 | .gcc_except_table ${RELOCATING-0} : ONLY_IF_RO { *(.gcc_except_table .gcc_except_table.*) } | |
e0001a05 NC |
434 | |
435 | /* Adjust the address for the data segment. We want to adjust up to | |
436 | the same address within the page on the next page up. */ | |
43cd72b9 | 437 | ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+. = ${DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}} |
e0001a05 | 438 | ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}} |
43cd72b9 BW |
439 | ${CREATE_PIE+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}} |
440 | ||
441 | /* Exception handling */ | |
ec2d9b29 AM |
442 | .eh_frame ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.eh_frame)) } |
443 | .gcc_except_table ${RELOCATING-0} : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) } | |
43cd72b9 BW |
444 | |
445 | /* Thread Local Storage sections */ | |
ec2d9b29 AM |
446 | .tdata ${RELOCATING-0} : { *(.tdata${RELOCATING+ .tdata.* .gnu.linkonce.td.*}) } |
447 | .tbss ${RELOCATING-0} : { *(.tbss${RELOCATING+ .tbss.* .gnu.linkonce.tb.*})${RELOCATING+ *(.tcommon)} } | |
e0001a05 | 448 | |
ec2d9b29 | 449 | .preinit_array ${RELOCATING-0} : |
6f2942ed | 450 | { |
3c173cb1 | 451 | ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__preinit_array_start = .);}} |
6f2942ed | 452 | KEEP (*(.preinit_array)) |
3c173cb1 | 453 | ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__preinit_array_end = .);}} |
6f2942ed | 454 | } |
3cff7cc7 JZ |
455 | ${RELOCATING+${INIT_ARRAY}} |
456 | ${RELOCATING+${FINI_ARRAY}} | |
be2c2e39 BW |
457 | ${SMALL_DATA_CTOR-${RELOCATING+${CTOR}}} |
458 | ${SMALL_DATA_DTOR-${RELOCATING+${DTOR}}} | |
ec2d9b29 | 459 | .jcr ${RELOCATING-0} : { KEEP (*(.jcr)) } |
43cd72b9 BW |
460 | |
461 | ${RELOCATING+${DATARELRO}} | |
462 | ${OTHER_RELRO_SECTIONS} | |
463 | ${TEXT_DYNAMIC-${DYNAMIC}} | |
be2c2e39 BW |
464 | ${DATA_GOT+${RELRO_NOW+${GOT}}} |
465 | ${DATA_GOT+${RELRO_NOW+${GOTPLT}}} | |
466 | ${DATA_GOT+${RELRO_NOW-${SEPARATE_GOTPLT+${GOT}}}} | |
43cd72b9 | 467 | ${RELOCATING+${DATA_SEGMENT_RELRO_END}} |
be2c2e39 BW |
468 | ${DATA_GOT+${RELRO_NOW-${SEPARATE_GOTPLT-${GOT}}}} |
469 | ${DATA_GOT+${RELRO_NOW-${GOTPLT}}} | |
470 | ||
471 | ${DATA_PLT+${PLT_BEFORE_GOT-${PLT}}} | |
43cd72b9 | 472 | |
ec2d9b29 | 473 | .data ${RELOCATING-0} : |
e0001a05 NC |
474 | { |
475 | ${RELOCATING+${DATA_START_SYMBOLS}} | |
476 | *(.data${RELOCATING+ .data.* .gnu.linkonce.d.*}) | |
477 | ${CONSTRUCTING+SORT(CONSTRUCTORS)} | |
478 | } | |
ec2d9b29 | 479 | .data1 ${RELOCATING-0} : { *(.data1) } |
e0001a05 NC |
480 | ${WRITABLE_RODATA+${RODATA}} |
481 | ${OTHER_READWRITE_SECTIONS} | |
be2c2e39 BW |
482 | ${SMALL_DATA_CTOR+${RELOCATING+${CTOR}}} |
483 | ${SMALL_DATA_DTOR+${RELOCATING+${DTOR}}} | |
484 | ${DATA_PLT+${PLT_BEFORE_GOT+${PLT}}} | |
485 | ${SDATA_GOT+${RELOCATING+${OTHER_GOT_SYMBOLS}}} | |
486 | ${SDATA_GOT+${GOT}} | |
487 | ${SDATA_GOT+${OTHER_GOT_SECTIONS}} | |
e0001a05 NC |
488 | ${SDATA} |
489 | ${OTHER_SDATA_SECTIONS} | |
3c173cb1 | 490 | ${RELOCATING+${DATA_END_SYMBOLS-${USER_LABEL_PREFIX}_edata = .; PROVIDE (${USER_LABEL_PREFIX}edata = .);}} |
e0001a05 NC |
491 | ${RELOCATING+__bss_start = .;} |
492 | ${RELOCATING+${OTHER_BSS_SYMBOLS}} | |
493 | ${SBSS} | |
be2c2e39 | 494 | ${BSS_PLT+${PLT}} |
ec2d9b29 | 495 | .bss ${RELOCATING-0} : |
e0001a05 NC |
496 | { |
497 | *(.dynbss) | |
498 | *(.bss${RELOCATING+ .bss.* .gnu.linkonce.b.*}) | |
499 | *(COMMON) | |
500 | /* Align here to ensure that the .bss section occupies space up to | |
501 | _end. Align after .bss to ensure correct alignment even if the | |
3c173cb1 BW |
502 | .bss section disappears because there are no input sections. |
503 | FIXME: Why do we need it? When there is no .bss section, we don't | |
504 | pad the .data section. */ | |
505 | ${RELOCATING+. = ALIGN(. != 0 ? ${ALIGNMENT} : 1);} | |
e0001a05 | 506 | } |
93c0f4a4 | 507 | ${OTHER_BSS_SECTIONS} |
827a1c67 | 508 | ${RELOCATING+${OTHER_BSS_END_SYMBOLS}} |
e0001a05 | 509 | ${RELOCATING+. = ALIGN(${ALIGNMENT});} |
3c173cb1 BW |
510 | ${LARGE_SECTIONS} |
511 | ${RELOCATING+. = ALIGN(${ALIGNMENT});} | |
9f4fb502 | 512 | ${RELOCATING+${OTHER_END_SYMBOLS}} |
3c173cb1 | 513 | ${RELOCATING+${END_SYMBOLS-${USER_LABEL_PREFIX}_end = .; PROVIDE (${USER_LABEL_PREFIX}end = .);}} |
e0001a05 | 514 | ${RELOCATING+${DATA_SEGMENT_END}} |
e78c4c7e | 515 | EOF |
e0001a05 | 516 | |
e78c4c7e BW |
517 | if test -n "${NON_ALLOC_DYN}"; then |
518 | if test -z "${NO_REL_RELOCS}${NO_RELA_RELOCS}"; then | |
519 | cat ldscripts/dyntmp.$$ | |
520 | else | |
521 | if test -z "${NO_REL_RELOCS}"; then | |
522 | sed -e '/^[ ]*\.rela\.[^}]*$/,/}/d' -e '/^[ ]*\.rela\./d' ldscripts/dyntmp.$$ | |
523 | fi | |
524 | if test -z "${NO_RELA_RELOCS}"; then | |
525 | sed -e '/^[ ]*\.rel\.[^}]*$/,/}/d' -e '/^[ ]*\.rel\./d' ldscripts/dyntmp.$$ | |
526 | fi | |
527 | fi | |
528 | rm -f ldscripts/dyntmp.$$ | |
529 | fi | |
530 | ||
531 | cat <<EOF | |
e0001a05 NC |
532 | /* Stabs debugging sections. */ |
533 | .stab 0 : { *(.stab) } | |
534 | .stabstr 0 : { *(.stabstr) } | |
535 | .stab.excl 0 : { *(.stab.excl) } | |
536 | .stab.exclstr 0 : { *(.stab.exclstr) } | |
537 | .stab.index 0 : { *(.stab.index) } | |
538 | .stab.indexstr 0 : { *(.stab.indexstr) } | |
539 | ||
540 | .comment 0 : { *(.comment) } | |
541 | ||
542 | /* DWARF debug sections. | |
543 | Symbols in the DWARF debugging sections are relative to the beginning | |
544 | of the section so we begin them at 0. */ | |
545 | ||
546 | /* DWARF 1 */ | |
547 | .debug 0 : { *(.debug) } | |
548 | .line 0 : { *(.line) } | |
549 | ||
550 | /* GNU DWARF 1 extensions */ | |
09b910c6 AM |
551 | .debug_srcinfo 0 : { *(.debug_srcinfo) } |
552 | .debug_sfnames 0 : { *(.debug_sfnames) } | |
e0001a05 NC |
553 | |
554 | /* DWARF 1.1 and DWARF 2 */ | |
09b910c6 AM |
555 | .debug_aranges 0 : { *(.debug_aranges) } |
556 | .debug_pubnames 0 : { *(.debug_pubnames) } | |
e0001a05 NC |
557 | |
558 | /* DWARF 2 */ | |
09b910c6 AM |
559 | .debug_info 0 : { *(.debug_info${RELOCATING+ .gnu.linkonce.wi.*}) } |
560 | .debug_abbrev 0 : { *(.debug_abbrev) } | |
561 | .debug_line 0 : { *(.debug_line) } | |
562 | .debug_frame 0 : { *(.debug_frame) } | |
563 | .debug_str 0 : { *(.debug_str) } | |
564 | .debug_loc 0 : { *(.debug_loc) } | |
565 | .debug_macinfo 0 : { *(.debug_macinfo) } | |
e0001a05 NC |
566 | |
567 | /* SGI/MIPS DWARF 2 extensions */ | |
09b910c6 AM |
568 | .debug_weaknames 0 : { *(.debug_weaknames) } |
569 | .debug_funcnames 0 : { *(.debug_funcnames) } | |
570 | .debug_typenames 0 : { *(.debug_typenames) } | |
571 | .debug_varnames 0 : { *(.debug_varnames) } | |
e0001a05 | 572 | |
93c0f4a4 | 573 | /* DWARF 3 */ |
09b910c6 AM |
574 | .debug_pubtypes 0 : { *(.debug_pubtypes) } |
575 | .debug_ranges 0 : { *(.debug_ranges) } | |
93c0f4a4 | 576 | |
3c173cb1 BW |
577 | ${TINY_DATA_SECTION} |
578 | ${TINY_BSS_SECTION} | |
579 | ||
e0001a05 | 580 | ${STACK_ADDR+${STACK}} |
104d59d1 | 581 | ${ATTRS_SECTIONS} |
e0001a05 | 582 | ${OTHER_SECTIONS} |
827a1c67 | 583 | ${RELOCATING+${OTHER_SYMBOLS}} |
1c68693b | 584 | ${RELOCATING+${DISCARDED}} |
e0001a05 NC |
585 | } |
586 | EOF |