Commit | Line | Data |
---|---|---|
e09a7106 SC |
1 | # |
2 | # Unusual variables checked by this code: | |
3 | # NOP - four byte opcode for no-op (defaults to 0) | |
4 | # DATA_ADDR - if end-of-text-plus-one-page isn't right for data start | |
5 | # INITIAL_READONLY_SECTIONS - at start of data segment | |
6 | # OTHER_READONLY_SECTIONS - other than .text .init .rodata ... | |
7 | # (e.g., .PARISC.milli) | |
8 | # OTHER_TEXT_SECTIONS - these get put in .text when relocating | |
9 | # OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ... | |
10 | # (e.g., .PARISC.global) | |
11 | # OTHER_BSS_SECTIONS - other than .bss .sbss ... | |
12 | # OTHER_SECTIONS - at the end | |
13 | # EXECUTABLE_SYMBOLS - symbols that must be defined for an | |
14 | # executable (e.g., _DYNAMIC_LINK) | |
15 | # TEXT_START_SYMBOLS - symbols that appear at the start of the | |
16 | # .text section. | |
17 | # DATA_START_SYMBOLS - symbols that appear at the start of the | |
18 | # .data section. | |
19 | # OTHER_GOT_SYMBOLS - symbols defined just before .got. | |
20 | # OTHER_GOT_SECTIONS - sections just after .got. | |
21 | # OTHER_SDATA_SECTIONS - sections just after .sdata. | |
22 | # OTHER_BSS_SYMBOLS - symbols that appear at the start of the | |
23 | # .bss section besides __bss_start. | |
24 | # DATA_PLT - .plt should be in data segment, not text segment. | |
25 | # BSS_PLT - .plt should be in bss segment | |
26 | # TEXT_DYNAMIC - .dynamic in text segment, not data segment. | |
27 | # EMBEDDED - whether this is for an embedded system. | |
28 | # SHLIB_TEXT_START_ADDR - if set, add to SIZEOF_HEADERS to set | |
29 | # start address of shared library. | |
30 | # INPUT_FILES - INPUT command of files to always include | |
31 | # WRITABLE_RODATA - if set, the .rodata section should be writable | |
32 | # INIT_START, INIT_END - statements just before and just after | |
33 | # combination of .init sections. | |
34 | # FINI_START, FINI_END - statements just before and just after | |
35 | # combination of .fini sections. | |
36 | # | |
37 | # When adding sections, do note that the names of some sections are used | |
38 | # when specifying the start address of the next. | |
39 | # | |
40 | ||
41 | # Many sections come in three flavours. There is the 'real' section, | |
42 | # like ".data". Then there are the per-procedure or per-variable | |
43 | # sections, generated by -ffunction-sections and -fdata-sections in GCC, | |
44 | # and useful for --gc-sections, which for a variable "foo" might be | |
45 | # ".data.foo". Then there are the linkonce sections, for which the linker | |
46 | # eliminates duplicates, which are named like ".gnu.linkonce.d.foo". | |
47 | # The exact correspondences are: | |
48 | # | |
49 | # Section Linkonce section | |
50 | # .text .gnu.linkonce.t.foo | |
51 | # .rodata .gnu.linkonce.r.foo | |
52 | # .data .gnu.linkonce.d.foo | |
53 | # .bss .gnu.linkonce.b.foo | |
54 | # .sdata .gnu.linkonce.s.foo | |
55 | # .sbss .gnu.linkonce.sb.foo | |
56 | # .sdata2 .gnu.linkonce.s2.foo | |
57 | # .sbss2 .gnu.linkonce.sb2.foo | |
58 | # | |
59 | # Each of these can also have corresponding .rel.* and .rela.* sections. | |
60 | ||
61 | test -z "$ENTRY" && ENTRY=_start | |
62 | test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT} | |
63 | test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT} | |
64 | if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi | |
65 | test -z "${ELFSIZE}" && ELFSIZE=32 | |
66 | test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8" | |
67 | test "$LD_FLAG" = "N" && DATA_ADDR=. | |
68 | INTERP=".interp ${RELOCATING-0} : { *(.interp) }" | |
69 | PLT=".plt ${RELOCATING-0} : { *(.plt) }" | |
70 | DYNAMIC=".dynamic ${RELOCATING-0} : { *(.dynamic) }" | |
71 | RODATA=".rodata ${RELOCATING-0} : { *(.rodata) ${RELOCATING+*(.rodata.*)} ${RELOCATING+*(.gnu.linkonce.r.*)} }" | |
72 | SBSS2=".sbss2 ${RELOCATING-0} : { *(.sbss2) ${RELOCATING+*(.sbss2.*)} ${RELOCATING+*(.gnu.linkonce.sb2.*)} }" | |
73 | SDATA2=".sdata2 ${RELOCATING-0} : { *(.sdata2) ${RELOCATING+*(.sdata2.*)} ${RELOCATING+*(.gnu.linkonce.s2.*)} }" | |
74 | CTOR=".ctors ${CONSTRUCTING-0} : | |
75 | { | |
76 | ${CONSTRUCTING+${CTOR_START}} | |
77 | /* gcc uses crtbegin.o to find the start of | |
78 | the constructors, so we make sure it is | |
79 | first. Because this is a wildcard, it | |
80 | doesn't matter if the user does not | |
81 | actually link against crtbegin.o; the | |
82 | linker won't look for a file to match a | |
83 | wildcard. The wildcard also means that it | |
84 | doesn't matter which directory crtbegin.o | |
85 | is in. */ | |
86 | ||
877d60f7 | 87 | KEEP (*crtbegin*.o(.ctors)) |
e09a7106 SC |
88 | |
89 | /* We don't want to include the .ctor section from | |
90 | from the crtend.o file until after the sorted ctors. | |
91 | The .ctor section from the crtend file contains the | |
92 | end of ctors marker and it must be last */ | |
93 | ||
877d60f7 | 94 | KEEP (*(EXCLUDE_FILE (*crtend*.o $OTHER_EXCLUDE_FILES) .ctors)) |
e09a7106 SC |
95 | KEEP (*(SORT(.ctors.*))) |
96 | KEEP (*(.ctors)) | |
97 | ${CONSTRUCTING+${CTOR_END}} | |
98 | }" | |
99 | ||
100 | DTOR=" .dtors ${CONSTRUCTING-0} : | |
101 | { | |
102 | ${CONSTRUCTING+${DTOR_START}} | |
877d60f7 AM |
103 | KEEP (*crtbegin*.o(.dtors)) |
104 | KEEP (*(EXCLUDE_FILE (*crtend*.o $OTHER_EXCLUDE_FILES) .dtors)) | |
e09a7106 SC |
105 | KEEP (*(SORT(.dtors.*))) |
106 | KEEP (*(.dtors)) | |
107 | ${CONSTRUCTING+${DTOR_END}} | |
108 | }" | |
109 | ||
110 | # if this is for an embedded system, don't add SIZEOF_HEADERS. | |
111 | if [ -z "$EMBEDDED" ]; then | |
112 | test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR} + SIZEOF_HEADERS" | |
113 | else | |
114 | test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR}" | |
115 | fi | |
116 | ||
117 | cat <<EOF | |
118 | OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}", | |
119 | "${LITTLE_OUTPUT_FORMAT}") | |
120 | OUTPUT_ARCH(${OUTPUT_ARCH}) | |
121 | ENTRY(${ENTRY}) | |
122 | ||
123 | ${RELOCATING+${LIB_SEARCH_DIRS}} | |
124 | ${RELOCATING+/* Do we need any of these for elf? | |
125 | __DYNAMIC = 0; ${STACKZERO+${STACKZERO}} ${SHLIB_PATH+${SHLIB_PATH}} */} | |
126 | ${RELOCATING+${EXECUTABLE_SYMBOLS}} | |
127 | ${RELOCATING+${INPUT_FILES}} | |
128 | ${RELOCATING- /* For some reason, the Solaris linker makes bad executables | |
129 | if gld -r is used and the intermediate file has sections starting | |
130 | at non-zero addresses. Could be a Solaris ld bug, could be a GNU ld | |
131 | bug. But for now assigning the zero vmas works. */} | |
132 | ||
133 | SECTIONS | |
134 | { | |
135 | ${CREATE_SHLIB-${RELOCATING+. = ${TEXT_BASE_ADDRESS};}} | |
136 | ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}} | |
137 | ${CREATE_SHLIB-${INTERP}} | |
138 | ${TEXT_DYNAMIC+${DYNAMIC}} | |
139 | ||
140 | EOF | |
141 | if [ "x$COMBRELOC" = x ]; then | |
142 | COMBRELOCCAT=cat | |
143 | else | |
144 | COMBRELOCCAT="cat > $COMBRELOC" | |
145 | fi | |
146 | eval $COMBRELOCCAT <<EOF | |
147 | .rel.init ${RELOCATING-0} : { *(.rel.init) } | |
148 | .rela.init ${RELOCATING-0} : { *(.rela.init) } | |
149 | .rel.text ${RELOCATING-0} : | |
150 | { | |
151 | *(.rel.text) | |
152 | ${RELOCATING+*(.rel.text.*)} | |
153 | ${RELOCATING+*(.rel.gnu.linkonce.t.*)} | |
154 | } | |
155 | .rela.text ${RELOCATING-0} : | |
156 | { | |
157 | *(.rela.text) | |
158 | ${RELOCATING+*(.rela.text.*)} | |
159 | ${RELOCATING+*(.rela.gnu.linkonce.t.*)} | |
160 | } | |
161 | .rel.fini ${RELOCATING-0} : { *(.rel.fini) } | |
162 | .rela.fini ${RELOCATING-0} : { *(.rela.fini) } | |
163 | .rel.rodata ${RELOCATING-0} : | |
164 | { | |
165 | *(.rel.rodata) | |
166 | ${RELOCATING+*(.rel.rodata.*)} | |
167 | ${RELOCATING+*(.rel.gnu.linkonce.r.*)} | |
168 | } | |
169 | .rela.rodata ${RELOCATING-0} : | |
170 | { | |
171 | *(.rela.rodata) | |
172 | ${RELOCATING+*(.rela.rodata.*)} | |
173 | ${RELOCATING+*(.rela.gnu.linkonce.r.*)} | |
174 | } | |
175 | ${OTHER_READONLY_RELOC_SECTIONS} | |
176 | .rel.data ${RELOCATING-0} : | |
177 | { | |
178 | *(.rel.data) | |
179 | ${RELOCATING+*(.rel.data.*)} | |
180 | ${RELOCATING+*(.rel.gnu.linkonce.d.*)} | |
181 | } | |
182 | .rela.data ${RELOCATING-0} : | |
183 | { | |
184 | *(.rela.data) | |
185 | ${RELOCATING+*(.rela.data.*)} | |
186 | ${RELOCATING+*(.rela.gnu.linkonce.d.*)} | |
187 | } | |
188 | .rel.ctors ${RELOCATING-0} : { *(.rel.ctors) } | |
189 | .rela.ctors ${RELOCATING-0} : { *(.rela.ctors) } | |
190 | .rel.dtors ${RELOCATING-0} : { *(.rel.dtors) } | |
191 | .rela.dtors ${RELOCATING-0} : { *(.rela.dtors) } | |
192 | .rel.got ${RELOCATING-0} : { *(.rel.got) } | |
193 | .rela.got ${RELOCATING-0} : { *(.rela.got) } | |
194 | ${OTHER_GOT_RELOC_SECTIONS} | |
195 | .rel.sdata ${RELOCATING-0} : | |
196 | { | |
197 | *(.rel.sdata) | |
198 | ${RELOCATING+*(.rel.sdata.*)} | |
199 | ${RELOCATING+*(.rel.gnu.linkonce.s.*)} | |
200 | } | |
201 | .rela.sdata ${RELOCATING-0} : | |
202 | { | |
203 | *(.rela.sdata) | |
204 | ${RELOCATING+*(.rela.sdata.*)} | |
205 | ${RELOCATING+*(.rela.gnu.linkonce.s.*)} | |
206 | } | |
207 | .rel.sbss ${RELOCATING-0} : | |
208 | { | |
209 | *(.rel.sbss) | |
210 | ${RELOCATING+*(.rel.sbss.*)} | |
211 | ${RELOCATING+*(.rel.gnu.linkonce.sb.*)} | |
212 | } | |
213 | .rela.sbss ${RELOCATING-0} : | |
214 | { | |
215 | *(.rela.sbss) | |
216 | ${RELOCATING+*(.rela.sbss.*)} | |
217 | ${RELOCATING+*(.rela.gnu.linkonce.sb.*)} | |
218 | } | |
219 | .rel.sdata2 ${RELOCATING-0} : | |
220 | { | |
221 | *(.rel.sdata2) | |
222 | ${RELOCATING+*(.rel.sdata2.*)} | |
223 | ${RELOCATING+*(.rel.gnu.linkonce.s2.*)} | |
224 | } | |
225 | .rela.sdata2 ${RELOCATING-0} : | |
226 | { | |
227 | *(.rela.sdata2) | |
228 | ${RELOCATING+*(.rela.sdata2.*)} | |
229 | ${RELOCATING+*(.rela.gnu.linkonce.s2.*)} | |
230 | } | |
231 | .rel.sbss2 ${RELOCATING-0} : | |
232 | { | |
233 | *(.rel.sbss2) | |
234 | ${RELOCATING+*(.rel.sbss2.*)} | |
235 | ${RELOCATING+*(.rel.gnu.linkonce.sb2.*)} | |
236 | } | |
237 | .rela.sbss2 ${RELOCATING-0} : | |
238 | { | |
239 | *(.rela.sbss2) | |
240 | ${RELOCATING+*(.rela.sbss2.*)} | |
241 | ${RELOCATING+*(.rela.gnu.linkonce.sb2.*)} | |
242 | } | |
243 | .rel.bss ${RELOCATING-0} : | |
244 | { | |
245 | *(.rel.bss) | |
246 | ${RELOCATING+*(.rel.bss.*)} | |
247 | ${RELOCATING+*(.rel.gnu.linkonce.b.*)} | |
248 | } | |
249 | .rela.bss ${RELOCATING-0} : | |
250 | { | |
251 | *(.rela.bss) | |
252 | ${RELOCATING+*(.rela.bss.*)} | |
253 | ${RELOCATING+*(.rela.gnu.linkonce.b.*)} | |
254 | } | |
255 | EOF | |
256 | if [ -n "$COMBRELOC" ]; then | |
257 | cat <<EOF | |
258 | .rel.dyn : | |
259 | { | |
260 | EOF | |
261 | sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rela\./d;s/^.*: { *\(.*\)}$/ \1/' $COMBRELOC | |
262 | cat <<EOF | |
263 | } | |
264 | .rela.dyn : | |
265 | { | |
266 | EOF | |
267 | sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rel\./d;s/^.*: { *\(.*\)}/ \1/' $COMBRELOC | |
268 | cat <<EOF | |
269 | } | |
270 | EOF | |
271 | fi | |
272 | cat <<EOF | |
273 | .rel.plt ${RELOCATING-0} : { *(.rel.plt) } | |
274 | .rela.plt ${RELOCATING-0} : { *(.rela.plt) } | |
275 | ${OTHER_PLT_RELOC_SECTIONS} | |
276 | ||
277 | .init ${RELOCATING-0} : | |
278 | { | |
279 | ${RELOCATING+${INIT_START}} | |
280 | KEEP (*(.init)) | |
281 | ${RELOCATING+${INIT_END}} | |
282 | } =${NOP-0} | |
283 | ||
284 | ${DATA_PLT-${BSS_PLT-${PLT}}} | |
285 | .text ${RELOCATING-0} : | |
286 | { | |
287 | ${RELOCATING+${TEXT_START_SYMBOLS}} | |
288 | *(.text) | |
289 | ${RELOCATING+*(.text.*)} | |
290 | *(.stub) | |
291 | /* .gnu.warning sections are handled specially by elf32.em. */ | |
292 | *(.gnu.warning) | |
293 | ${RELOCATING+*(.gnu.linkonce.t.*)} | |
294 | ${RELOCATING+${OTHER_TEXT_SECTIONS}} | |
295 | } =${NOP-0} | |
296 | .fini ${RELOCATING-0} : | |
297 | { | |
298 | ${RELOCATING+${FINI_START}} | |
299 | KEEP (*(.fini)) | |
300 | ${RELOCATING+${FINI_END}} | |
301 | } =${NOP-0} | |
302 | ${RELOCATING+PROVIDE (__etext = .);} | |
303 | ${RELOCATING+PROVIDE (_etext = .);} | |
304 | ${RELOCATING+PROVIDE (etext = .);} | |
305 | ||
306 | /* Adjust the address for the data segment. We want to adjust up to | |
307 | the same address within the page on the next page up. */ | |
308 | ${CREATE_SHLIB-${RELOCATING+. = ${DATA_ADDR-ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))};}} | |
309 | ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_DATA_ADDR-ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))};}} | |
310 | ||
311 | .data ${RELOCATING-0} : | |
312 | { | |
313 | ${RELOCATING+${DATA_START_SYMBOLS}} | |
314 | *(.data) | |
315 | ${RELOCATING+*(.data.*)} | |
316 | ${RELOCATING+*(.gnu.linkonce.d.*)} | |
317 | ${CONSTRUCTING+SORT(CONSTRUCTORS)} | |
318 | } | |
319 | .data1 ${RELOCATING-0} : { *(.data1) } | |
320 | .eh_frame ${RELOCATING-0} : | |
321 | { | |
322 | ${RELOCATING+PROVIDE (__eh_frame_begin = .);} | |
323 | *(.eh_frame) | |
324 | LONG (0); | |
325 | ${RELOCATING+PROVIDE (__eh_frame_end = .);} | |
326 | } ${RELOCATING+} | |
327 | .gcc_except_table : { *(.gcc_except_table) } | |
328 | ${INITIAL_READONLY_SECTIONS} | |
329 | .hash ${RELOCATING-0} : { *(.hash) } | |
330 | .dynsym ${RELOCATING-0} : { *(.dynsym) } | |
331 | .dynstr ${RELOCATING-0} : { *(.dynstr) } | |
332 | .gnu.version ${RELOCATING-0} : { *(.gnu.version) } | |
333 | .gnu.version_d ${RELOCATING-0} : { *(.gnu.version_d) } | |
334 | .gnu.version_r ${RELOCATING-0} : { *(.gnu.version_r) } | |
335 | ${RODATA} | |
336 | .rodata1 ${RELOCATING-0} : { *(.rodata1) } | |
337 | ${CREATE_SHLIB-${SDATA2}} | |
338 | ${CREATE_SHLIB-${SBSS2}} | |
339 | ${RELOCATING+${OTHER_READONLY_SECTIONS}} | |
340 | ${RELOCATING+${OTHER_READWRITE_SECTIONS}} | |
341 | ${TEXT_DYNAMIC-${DYNAMIC}} | |
342 | ${RELOCATING+${CTOR}} | |
343 | ${RELOCATING+${DTOR}} | |
344 | .jcr : { KEEP (*(.jcr)) } | |
345 | ${DATA_PLT+${PLT}} | |
346 | ${RELOCATING+${OTHER_GOT_SYMBOLS}} | |
347 | .got ${RELOCATING-0} : { *(.got.plt) *(.got) } | |
348 | ${RELOCATING+${OTHER_GOT_SECTIONS}} | |
349 | ${CREATE_SHLIB+${SDATA2}} | |
350 | ${CREATE_SHLIB+${SBSS2}} | |
351 | /* We want the small data sections together, so single-instruction offsets | |
352 | can access them all, and initialized data all before uninitialized, so | |
353 | we can shorten the on-disk segment size. */ | |
354 | .sdata ${RELOCATING-0} : | |
355 | { | |
356 | ${RELOCATING+${SDATA_START_SYMBOLS}} | |
357 | *(.sdata) | |
358 | ${RELOCATING+*(.sdata.*)} | |
359 | ${RELOCATING+*(.gnu.linkonce.s.*)} | |
360 | } | |
361 | ${RELOCATING+${OTHER_SDATA_SECTIONS}} | |
362 | ${RELOCATING+_edata = .;} | |
363 | ${RELOCATING+PROVIDE (edata = .);} | |
364 | ${RELOCATING+__bss_start = .;} | |
365 | ${RELOCATING+${OTHER_BSS_SYMBOLS}} | |
366 | .sbss ${RELOCATING-0} : | |
367 | { | |
368 | ${RELOCATING+PROVIDE (__sbss_start = .);} | |
369 | ${RELOCATING+PROVIDE (___sbss_start = .);} | |
370 | *(.dynsbss) | |
371 | *(.sbss) | |
372 | ${RELOCATING+*(.sbss.*)} | |
373 | ${RELOCATING+*(.gnu.linkonce.sb.*)} | |
374 | *(.scommon) | |
375 | ${RELOCATING+PROVIDE (__sbss_end = .);} | |
376 | ${RELOCATING+PROVIDE (___sbss_end = .);} | |
377 | } | |
378 | ${BSS_PLT+${PLT}} | |
379 | .bss ${RELOCATING-0} : | |
380 | { | |
381 | *(.dynbss) | |
382 | *(.bss) | |
383 | ${RELOCATING+*(.bss.*)} | |
384 | ${RELOCATING+*(.gnu.linkonce.b.*)} | |
385 | *(COMMON) | |
386 | /* Align here to ensure that the .bss section occupies space up to | |
387 | _end. Align after .bss to ensure correct alignment even if the | |
388 | .bss section disappears because there are no input sections. */ | |
389 | ${RELOCATING+. = ALIGN(${ALIGNMENT});} | |
390 | } | |
391 | ${RELOCATING+${OTHER_BSS_SECTIONS}} | |
392 | ${RELOCATING+. = ALIGN(${ALIGNMENT});} | |
393 | ${RELOCATING+_end = .;} | |
394 | ${RELOCATING+${OTHER_BSS_END_SYMBOLS}} | |
395 | ${RELOCATING+PROVIDE (end = .);} | |
396 | ||
397 | /* Stabs debugging sections. */ | |
398 | .stab 0 : { *(.stab) } | |
399 | .stabstr 0 : { *(.stabstr) } | |
400 | .stab.excl 0 : { *(.stab.excl) } | |
401 | .stab.exclstr 0 : { *(.stab.exclstr) } | |
402 | .stab.index 0 : { *(.stab.index) } | |
403 | .stab.indexstr 0 : { *(.stab.indexstr) } | |
404 | ||
405 | .comment 0 : { *(.comment) } | |
406 | ||
407 | /* DWARF debug sections. | |
408 | Symbols in the DWARF debugging sections are relative to the beginning | |
409 | of the section so we begin them at 0. */ | |
410 | ||
411 | /* DWARF 1 */ | |
412 | .debug 0 : { *(.debug) } | |
413 | .line 0 : { *(.line) } | |
414 | ||
415 | /* GNU DWARF 1 extensions */ | |
416 | .debug_srcinfo 0 : { *(.debug_srcinfo) } | |
417 | .debug_sfnames 0 : { *(.debug_sfnames) } | |
418 | ||
419 | /* DWARF 1.1 and DWARF 2 */ | |
420 | .debug_aranges 0 : { *(.debug_aranges) } | |
421 | .debug_pubnames 0 : { *(.debug_pubnames) } | |
422 | ||
423 | /* DWARF 2 */ | |
424 | .debug_info 0 : { *(.debug_info) *(.gnu.linkonce.wi.*) } | |
425 | .debug_abbrev 0 : { *(.debug_abbrev) } | |
426 | .debug_line 0 : { *(.debug_line) } | |
427 | .debug_frame 0 : { *(.debug_frame) } | |
428 | .debug_str 0 : { *(.debug_str) } | |
429 | .debug_loc 0 : { *(.debug_loc) } | |
430 | .debug_macinfo 0 : { *(.debug_macinfo) } | |
431 | ||
432 | /* SGI/MIPS DWARF 2 extensions */ | |
433 | .debug_weaknames 0 : { *(.debug_weaknames) } | |
434 | .debug_funcnames 0 : { *(.debug_funcnames) } | |
435 | .debug_typenames 0 : { *(.debug_typenames) } | |
436 | .debug_varnames 0 : { *(.debug_varnames) } | |
437 | ||
438 | ${RELOCATING+${OTHER_RELOCATING_SECTIONS}} | |
439 | ||
440 | /* These must appear regardless of ${RELOCATING}. */ | |
441 | ${OTHER_SECTIONS} | |
442 | } | |
443 | EOF |