[deliverable/binutils-gdb.git] / ld / scripttempl / mep.sc

#
# Unusual variables checked by this code:
#	NOP - four byte opcode for no-op (defaults to 0)
#	NO_SMALL_DATA - no .sbss/.sbss2/.sdata/.sdata2 sections if not
#		empty.
#	SMALL_DATA_CTOR - .ctors contains small data.
#	SMALL_DATA_DTOR - .dtors contains small data.
#	DATA_ADDR - if end-of-text-plus-one-page isn't right for data start
#	INITIAL_READONLY_SECTIONS - at start of text segment
#	OTHER_READONLY_SECTIONS - other than .text .init .rodata ...
#		(e.g., .PARISC.milli)
#	OTHER_TEXT_SECTIONS - these get put in .text when relocating
#	OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ...
#		(e.g., .PARISC.global)
#	OTHER_RELRO_SECTIONS - other than .data.rel.ro ...
#		(e.g. PPC32 .fixup, .got[12])
#	OTHER_BSS_SECTIONS - other than .bss .sbss ...
#	OTHER_SECTIONS - at the end
#	EXECUTABLE_SYMBOLS - symbols that must be defined for an
#		executable (e.g., _DYNAMIC_LINK)
#       TEXT_START_ADDR - the first byte of the text segment, after any
#               headers.
#       TEXT_BASE_ADDRESS - the first byte of the text segment.
#	TEXT_START_SYMBOLS - symbols that appear at the start of the
#		.text section.
#	DATA_START_SYMBOLS - symbols that appear at the start of the
#		.data section.
#	OTHER_GOT_SYMBOLS - symbols defined just before .got.
#	OTHER_GOT_SECTIONS - sections just after .got.
#	OTHER_SDATA_SECTIONS - sections just after .sdata.
#	OTHER_BSS_SYMBOLS - symbols that appear at the start of the
#		.bss section besides __bss_start.
#	DATA_PLT - .plt should be in data segment, not text segment.
#	PLT_BEFORE_GOT - .plt just before .got when .plt is in data segement.
#	BSS_PLT - .plt should be in bss segment
#	TEXT_DYNAMIC - .dynamic in text segment, not data segment.
#	EMBEDDED - whether this is for an embedded system. 
#	SHLIB_TEXT_START_ADDR - if set, add to SIZEOF_HEADERS to set
#		start address of shared library.
#	INPUT_FILES - INPUT command of files to always include
#	WRITABLE_RODATA - if set, the .rodata section should be writable
#	INIT_START, INIT_END -  statements just before and just after
# 	combination of .init sections.
#	FINI_START, FINI_END - statements just before and just after
# 	combination of .fini sections.
#	STACK_ADDR - start of a .stack section.
#	OTHER_END_SYMBOLS - symbols to place right at the end of the script.
#	SEPARATE_GOTPLT - if set, .got.plt should be separate output section,
#		so that .got can be in the RELRO area.  It should be set to
#		the number of bytes in the beginning of .got.plt which can be
#		in the RELRO area as well.
#
# When adding sections, do note that the names of some sections are used
# when specifying the start address of the next.
#

#  Many sections come in three flavours.  There is the 'real' section,
#  like ".data".  Then there are the per-procedure or per-variable
#  sections, generated by -ffunction-sections and -fdata-sections in GCC,
#  and useful for --gc-sections, which for a variable "foo" might be
#  ".data.foo".  Then there are the linkonce sections, for which the linker
#  eliminates duplicates, which are named like ".gnu.linkonce.d.foo".
#  The exact correspondences are:
#
#  Section	Linkonce section
#  .text	.gnu.linkonce.t.foo
#  .rodata	.gnu.linkonce.r.foo
#  .data	.gnu.linkonce.d.foo
#  .bss		.gnu.linkonce.b.foo
#  .sdata	.gnu.linkonce.s.foo
#  .sbss	.gnu.linkonce.sb.foo
#  .sdata2	.gnu.linkonce.s2.foo
#  .sbss2	.gnu.linkonce.sb2.foo
#  .debug_info	.gnu.linkonce.wi.foo
#  .tdata	.gnu.linkonce.td.foo
#  .tbss	.gnu.linkonce.tb.foo
#
#  Each of these can also have corresponding .rel.* and .rela.* sections.

test -z "$ENTRY" && ENTRY=_start
test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT}
test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi
test -z "${ELFSIZE}" && ELFSIZE=32
test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8"
test "$LD_FLAG" = "N" && DATA_ADDR=.
test -n "$CREATE_SHLIB$CREATE_PIE" && test -n "$SHLIB_DATA_ADDR" && COMMONPAGESIZE=""
test -z "$CREATE_SHLIB$CREATE_PIE" && test -n "$DATA_ADDR" && COMMONPAGESIZE=""
test -n "$RELRO_NOW" && unset SEPARATE_GOTPLT
DATA_SEGMENT_ALIGN="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))"
DATA_SEGMENT_RELRO_END=""
DATA_SEGMENT_RELRO_GOTPLT_END=""
DATA_SEGMENT_END=""
if test -n "${COMMONPAGESIZE}"; then
  DATA_SEGMENT_ALIGN="ALIGN (${SEGMENT_SIZE}) - ((${MAXPAGESIZE} - .) & (${MAXPAGESIZE} - 1)); . = DATA_SEGMENT_ALIGN (${MAXPAGESIZE}, ${COMMONPAGESIZE})"
  DATA_SEGMENT_END=". = DATA_SEGMENT_END (.);"
  if test -n "${SEPARATE_GOTPLT}"; then
    DATA_SEGMENT_RELRO_GOTPLT_END=". = DATA_SEGMENT_RELRO_END (${SEPARATE_GOTPLT}, .);"
  else
    DATA_SEGMENT_RELRO_END=". = DATA_SEGMENT_RELRO_END (0, .);"
  fi
fi
INTERP=".interp       ${RELOCATING-0} : { *(.interp) }"
PLT=".plt          ${RELOCATING-0} : { *(.plt) }"
if test -z "$GOT"; then
  if test -z "$SEPARATE_GOTPLT"; then
    GOT=".got          ${RELOCATING-0} : { *(.got.plt) *(.got) }"
  else
    GOT=".got          ${RELOCATING-0} : { *(.got) }"
    GOTPLT="${RELOCATING+${DATA_SEGMENT_RELRO_GOTPLT_END}}
  .got.plt      ${RELOCATING-0} : { *(.got.plt) }"
  fi
fi
DYNAMIC=".dynamic      ${RELOCATING-0} : { *(.dynamic) }"
RODATA=".rodata       ${RELOCATING-0} : { *(.rodata${RELOCATING+ .rodata.* .gnu.linkonce.r.*}) }"
DATARELRO=".data.rel.ro : { *(.data.rel.ro.local) *(.data.rel.ro .data.rel.ro.*) }"
DISCARDED="/DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink)  *(.gnu.lto_*) }"
if test -z "${NO_SMALL_DATA}"; then
  SBSS=".sbss         ${RELOCATING-0} :
  {
    ${RELOCATING+PROVIDE (__sbss_start = .);}
    ${RELOCATING+PROVIDE (___sbss_start = .);}
    ${CREATE_SHLIB+*(.sbss2 .sbss2.* .gnu.linkonce.sb2.*)}
    *(.dynsbss)
    *(.sbss${RELOCATING+ .sbss.* .gnu.linkonce.sb.*})
    *(.scommon)
    ${RELOCATING+PROVIDE (__sbss_end = .);}
    ${RELOCATING+PROVIDE (___sbss_end = .);}
  }"
  SBSS2=".sbss2        ${RELOCATING-0} : { *(.sbss2${RELOCATING+ .sbss2.* .gnu.linkonce.sb2.*}) }"
  SDATA="/* We want the small data sections together, so single-instruction offsets
     can access them all, and initialized data all before uninitialized, so
     we can shorten the on-disk segment size.  */
  .sdata        ${RELOCATING-0} : 
  {
    ${RELOCATING+${SDATA_START_SYMBOLS}}
    ${CREATE_SHLIB+*(.sdata2 .sdata2.* .gnu.linkonce.s2.*)}
    *(.sdata${RELOCATING+ .sdata.* .gnu.linkonce.s.*})
  }"
  SDATA2=".sdata2       ${RELOCATING-0} : { *(.sdata2${RELOCATING+ .sdata2.* .gnu.linkonce.s2.*}) }"
  REL_SDATA=".rel.sdata    ${RELOCATING-0} : { *(.rel.sdata${RELOCATING+ .rel.sdata.* .rel.gnu.linkonce.s.*}) }
  .rela.sdata   ${RELOCATING-0} : { *(.rela.sdata${RELOCATING+ .rela.sdata.* .rela.gnu.linkonce.s.*}) }"
  REL_SBSS=".rel.sbss     ${RELOCATING-0} : { *(.rel.sbss${RELOCATING+ .rel.sbss.* .rel.gnu.linkonce.sb.*}) }
  .rela.sbss    ${RELOCATING-0} : { *(.rela.sbss${RELOCATING+ .rela.sbss.* .rela.gnu.linkonce.sb.*}) }"
  REL_SDATA2=".rel.sdata2   ${RELOCATING-0} : { *(.rel.sdata2${RELOCATING+ .rel.sdata2.* .rel.gnu.linkonce.s2.*}) }
  .rela.sdata2  ${RELOCATING-0} : { *(.rela.sdata2${RELOCATING+ .rela.sdata2.* .rela.gnu.linkonce.s2.*}) }"
  REL_SBSS2=".rel.sbss2    ${RELOCATING-0} : { *(.rel.sbss2${RELOCATING+ .rel.sbss2.* .rel.gnu.linkonce.sb2.*}) }
  .rela.sbss2   ${RELOCATING-0} : { *(.rela.sbss2${RELOCATING+ .rela.sbss2.* .rela.gnu.linkonce.sb2.*}) }"
else
  NO_SMALL_DATA=" "
fi
test -n "$SEPARATE_GOTPLT" && SEPARATE_GOTPLT=" "
CTOR=".ctors        ${CONSTRUCTING-0} : 
  {
    ${CONSTRUCTING+${CTOR_START}}
    /* gcc uses crtbegin.o to find the start of
       the constructors, so we make sure it is
       first.  Because this is a wildcard, it
       doesn't matter if the user does not
       actually link against crtbegin.o; the
       linker won't look for a file to match a
       wildcard.  The wildcard also means that it
       doesn't matter which directory crtbegin.o
       is in.  */

    KEEP (*crtbegin*.o(.ctors))

    /* We don't want to include the .ctor section from
       from the crtend.o file until after the sorted ctors.
       The .ctor section from the crtend file contains the
       end of ctors marker and it must be last */

    KEEP (*(EXCLUDE_FILE (*crtend*.o $OTHER_EXCLUDE_FILES) .ctors))
    KEEP (*(SORT(.ctors.*)))
    KEEP (*(.ctors))
    ${CONSTRUCTING+${CTOR_END}}
  }"
DTOR=".dtors        ${CONSTRUCTING-0} :
  {
    ${CONSTRUCTING+${DTOR_START}}
    KEEP (*crtbegin*.o(.dtors))
    KEEP (*(EXCLUDE_FILE (*crtend*.o $OTHER_EXCLUDE_FILES) .dtors))
    KEEP (*(SORT(.dtors.*)))
    KEEP (*(.dtors))
    ${CONSTRUCTING+${DTOR_END}}
  }"
STACK="  .stack        ${RELOCATING-0}${RELOCATING+${STACK_ADDR}} :
  {
    ${RELOCATING+_stack = .;}
    *(.stack)
  }"

# if this is for an embedded system, don't add SIZEOF_HEADERS.
if [ -z "$EMBEDDED" ]; then
   test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR} + SIZEOF_HEADERS"
else
   test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR}"
fi

cat <<EOF
OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}",
	      "${LITTLE_OUTPUT_FORMAT}")
OUTPUT_ARCH(${OUTPUT_ARCH})
${RELOCATING+ENTRY(${ENTRY})}

${RELOCATING+${LIB_SEARCH_DIRS}}
${RELOCATING+/* Do we need any of these for elf?
   __DYNAMIC = 0; ${STACKZERO+${STACKZERO}} ${SHLIB_PATH+${SHLIB_PATH}}  */}
${RELOCATING+${EXECUTABLE_SYMBOLS}}
${RELOCATING+${INPUT_FILES}}
${RELOCATING- /* For some reason, the Solaris linker makes bad executables
  if gld -r is used and the intermediate file has sections starting
  at non-zero addresses.  Could be a Solaris ld bug, could be a GNU ld
  bug.  But for now assigning the zero vmas works.  */}

SECTIONS
{
  /* Read-only sections, merged into text segment: */
  ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+PROVIDE (__executable_start = ${TEXT_START_ADDR}); . = ${TEXT_BASE_ADDRESS};}}}
  ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}}
  ${CREATE_PIE+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}}
  ${CREATE_SHLIB-${INTERP}}
  ${INITIAL_READONLY_SECTIONS}
  ${TEXT_DYNAMIC+${DYNAMIC}}
  .hash         ${RELOCATING-0} : { *(.hash) }
  .dynsym       ${RELOCATING-0} : { *(.dynsym) }
  .dynstr       ${RELOCATING-0} : { *(.dynstr) }
  .gnu.version  ${RELOCATING-0} : { *(.gnu.version) }
  .gnu.version_d ${RELOCATING-0}: { *(.gnu.version_d) }
  .gnu.version_r ${RELOCATING-0}: { *(.gnu.version_r) }

EOF
if [ "x$COMBRELOC" = x ]; then
  COMBRELOCCAT=cat
else
  COMBRELOCCAT="cat > $COMBRELOC"
fi
eval $COMBRELOCCAT <<EOF
  .rel.init     ${RELOCATING-0} : { *(.rel.init) }
  .rela.init    ${RELOCATING-0} : { *(.rela.init) }
  .rel.text     ${RELOCATING-0} : { *(.rel.text${RELOCATING+ .rel.text.* .rel.gnu.linkonce.t.*}) }
  .rela.text    ${RELOCATING-0} : { *(.rela.text${RELOCATING+ .rela.text.* .rela.gnu.linkonce.t.*}) }
  .rel.fini     ${RELOCATING-0} : { *(.rel.fini) }
  .rela.fini    ${RELOCATING-0} : { *(.rela.fini) }
  .rel.rodata   ${RELOCATING-0} : { *(.rel.rodata${RELOCATING+ .rel.rodata.* .rel.gnu.linkonce.r.*}) }
  .rela.rodata  ${RELOCATING-0} : { *(.rela.rodata${RELOCATING+ .rela.rodata.* .rela.gnu.linkonce.r.*}) }
  ${OTHER_READONLY_RELOC_SECTIONS}
  .rel.data.rel.ro ${RELOCATING-0} : { *(.rel.data.rel.ro${RELOCATING+ .rel.data.rel.ro.*}) }
  .rela.data.rel.ro ${RELOCATING-0} : { *(.rela.data.rel.ro${RELOCATING+ .rela.data.rel.ro.*}) }
  .rel.data     ${RELOCATING-0} : { *(.rel.data${RELOCATING+ .rel.data.* .rel.gnu.linkonce.d.*}) }
  .rela.data    ${RELOCATING-0} : { *(.rela.data${RELOCATING+ .rela.data.* .rela.gnu.linkonce.d.*}) }
  .rel.tdata	${RELOCATING-0} : { *(.rel.tdata${RELOCATING+ .rel.tdata.* .rel.gnu.linkonce.td.*}) }
  .rela.tdata	${RELOCATING-0} : { *(.rela.tdata${RELOCATING+ .rela.tdata.* .rela.gnu.linkonce.td.*}) }
  .rel.tbss	${RELOCATING-0} : { *(.rel.tbss${RELOCATING+ .rel.tbss.* .rel.gnu.linkonce.tb.*}) }
  .rela.tbss	${RELOCATING-0} : { *(.rela.tbss${RELOCATING+ .rela.tbss.* .rela.gnu.linkonce.tb.*}) }
  .rel.ctors    ${RELOCATING-0} : { *(.rel.ctors) }
  .rela.ctors   ${RELOCATING-0} : { *(.rela.ctors) }
  .rel.dtors    ${RELOCATING-0} : { *(.rel.dtors) }
  .rela.dtors   ${RELOCATING-0} : { *(.rela.dtors) }
  .rel.got      ${RELOCATING-0} : { *(.rel.got) }
  .rela.got     ${RELOCATING-0} : { *(.rela.got) }
  ${OTHER_GOT_RELOC_SECTIONS}
  ${REL_SDATA}
  ${REL_SBSS}
  ${REL_SDATA2}
  ${REL_SBSS2}
  .rel.bss      ${RELOCATING-0} : { *(.rel.bss${RELOCATING+ .rel.bss.* .rel.gnu.linkonce.b.*}) }
  .rela.bss     ${RELOCATING-0} : { *(.rela.bss${RELOCATING+ .rela.bss.* .rela.gnu.linkonce.b.*}) }
EOF
if [ -n "$COMBRELOC" ]; then
cat <<EOF
  .rel.dyn      ${RELOCATING-0} :
    {
EOF
sed -e '/^[ 	]*[{}][ 	]*$/d;/:[ 	]*$/d;/\.rela\./d;s/^.*: { *\(.*\)}$/      \1/' $COMBRELOC
cat <<EOF
    }
  .rela.dyn     ${RELOCATING-0} :
    {
EOF
sed -e '/^[ 	]*[{}][ 	]*$/d;/:[ 	]*$/d;/\.rel\./d;s/^.*: { *\(.*\)}/      \1/' $COMBRELOC
cat <<EOF
    }
EOF
fi
cat <<EOF
  .rel.plt      ${RELOCATING-0} : { *(.rel.plt) }
  .rela.plt     ${RELOCATING-0} : { *(.rela.plt) }
  ${OTHER_PLT_RELOC_SECTIONS}

  .init         ${RELOCATING-0} : 
  { 
    ${RELOCATING+${INIT_START}}
    KEEP (*(.init))
    ${RELOCATING+${INIT_END}}
  } =${NOP-0}

  ${DATA_PLT-${BSS_PLT-${PLT}}}
  .text         ${RELOCATING-0} :
  {
    ${RELOCATING+${TEXT_START_SYMBOLS}}
    *(.text .stub${RELOCATING+ .text.* .gnu.linkonce.t.*})
    /* .gnu.warning sections are handled specially by elf32.em.  */
    *(.gnu.warning)
    ${RELOCATING+${OTHER_TEXT_SECTIONS}}
  } =${NOP-0}
  .fini         ${RELOCATING-0} :
  {
    ${RELOCATING+${FINI_START}}
    KEEP (*(.fini))
    ${RELOCATING+${FINI_END}}
  } =${NOP-0}
  ${RELOCATING+PROVIDE (__etext = .);}
  ${RELOCATING+PROVIDE (_etext = .);}
  ${RELOCATING+PROVIDE (etext = .);}
  ${WRITABLE_RODATA-${RODATA}}
  .rodata1      ${RELOCATING-0} : { *(.rodata1) }
  ${CREATE_SHLIB-${SDATA2}}
  ${CREATE_SHLIB-${SBSS2}}
  ${OTHER_READONLY_SECTIONS}
  .eh_frame_hdr : { *(.eh_frame_hdr) }
  .eh_frame     ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.eh_frame)) }
  .gcc_except_table ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.gcc_except_table)) *(.gcc_except_table.*) }

  /* Adjust the address for the data segment.  We want to adjust up to
     the same address within the page on the next page up.  */
  ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+. = ${DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}}
  ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}
  ${CREATE_PIE+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}

  /* Exception handling  */
  .eh_frame     ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.eh_frame)) }
  .gcc_except_table ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.gcc_except_table)) *(.gcc_except_table.*) }

  /* Thread Local Storage sections  */
  .tdata	${RELOCATING-0} : { *(.tdata${RELOCATING+ .tdata.* .gnu.linkonce.td.*}) }
  .tbss		${RELOCATING-0} : { *(.tbss${RELOCATING+ .tbss.* .gnu.linkonce.tb.*})${RELOCATING+ *(.tcommon)} }

  .preinit_array   ${RELOCATING-0} : { KEEP (*(.preinit_array)) }
  .init_array   ${RELOCATING-0} : { KEEP (*(.init_array)) }
  .fini_array   ${RELOCATING-0} : { KEEP (*(.fini_array)) }

  ${SMALL_DATA_CTOR-${RELOCATING+${CTOR}}}
  ${SMALL_DATA_DTOR-${RELOCATING+${DTOR}}}
  .jcr          ${RELOCATING-0} : { KEEP (*(.jcr)) }

  ${RELOCATING+${DATARELRO}}
  ${OTHER_RELRO_SECTIONS}
  ${TEXT_DYNAMIC-${DYNAMIC}}
  ${NO_SMALL_DATA+${RELRO_NOW+${GOT}}}
  ${NO_SMALL_DATA+${RELRO_NOW-${SEPARATE_GOTPLT+${GOT}}}}
  ${NO_SMALL_DATA+${RELRO_NOW-${SEPARATE_GOTPLT+${GOTPLT}}}}
  ${RELOCATING+${DATA_SEGMENT_RELRO_END}}
  ${NO_SMALL_DATA+${RELRO_NOW-${SEPARATE_GOTPLT-${GOT}}}}

  ${DATA_PLT+${PLT_BEFORE_GOT-${PLT}}}

  .data         ${RELOCATING-0} :
  {
    ${RELOCATING+${DATA_START_SYMBOLS}}
    *(.data${RELOCATING+ .data.* .gnu.linkonce.d.*})
    ${CONSTRUCTING+SORT(CONSTRUCTORS)}
  }
  .data1        ${RELOCATING-0} : { *(.data1) }
  ${WRITABLE_RODATA+${RODATA}}
  ${OTHER_READWRITE_SECTIONS}
  ${SMALL_DATA_CTOR+${RELOCATING+${CTOR}}}
  ${SMALL_DATA_DTOR+${RELOCATING+${DTOR}}}
  ${DATA_PLT+${PLT_BEFORE_GOT+${PLT}}}
  ${RELOCATING+${OTHER_GOT_SYMBOLS}}
  ${NO_SMALL_DATA-${GOT}}
  ${OTHER_GOT_SECTIONS}
  ${SDATA}
  ${OTHER_SDATA_SECTIONS}
  ${RELOCATING+_edata = .;}
  ${RELOCATING+PROVIDE (edata = .);}
  ${RELOCATING+__bss_start = .;}
  ${RELOCATING+${OTHER_BSS_SYMBOLS}}
  ${SBSS}
  ${BSS_PLT+${PLT}}
  .bss          ${RELOCATING-0} :
  {
   *(.dynbss)
   *(.bss${RELOCATING+ .bss.* .gnu.linkonce.b.*})
   *(COMMON)
   /* Align here to ensure that the .bss section occupies space up to
      _end.  Align after .bss to ensure correct alignment even if the
      .bss section disappears because there are no input sections.  */
   ${RELOCATING+. = ALIGN(${ALIGNMENT});}
  }
  ${OTHER_BSS_SECTIONS}
  ${RELOCATING+. = ALIGN(${ALIGNMENT});}
  ${RELOCATING+_end = .;}
  ${RELOCATING+${OTHER_BSS_END_SYMBOLS}}
  ${RELOCATING+PROVIDE (end = .);}
  ${RELOCATING+${DATA_SEGMENT_END}}

  /* Stabs debugging sections.  */
  .stab          0 : { *(.stab) }
  .stabstr       0 : { *(.stabstr) }
  .stab.excl     0 : { *(.stab.excl) }
  .stab.exclstr  0 : { *(.stab.exclstr) }
  .stab.index    0 : { *(.stab.index) }
  .stab.indexstr 0 : { *(.stab.indexstr) }

  .comment       0 : { *(.comment) }

EOF

. $srcdir/scripttempl/DWARF.sc

cat <<EOF
  ${STACK_ADDR+${STACK}}
  ${OTHER_SECTIONS}
  ${RELOCATING+${OTHER_END_SYMBOLS}}
  ${RELOCATING+${DISCARDED}}
}
EOF
Commit	Line	Data
19d9b7d3 DB	1	#
	2	# Unusual variables checked by this code:
	3	# NOP - four byte opcode for no-op (defaults to 0)
	4	# NO_SMALL_DATA - no .sbss/.sbss2/.sdata/.sdata2 sections if not
	5	# empty.
	6	# SMALL_DATA_CTOR - .ctors contains small data.
	7	# SMALL_DATA_DTOR - .dtors contains small data.
	8	# DATA_ADDR - if end-of-text-plus-one-page isn't right for data start
	9	# INITIAL_READONLY_SECTIONS - at start of text segment
	10	# OTHER_READONLY_SECTIONS - other than .text .init .rodata ...
	11	# (e.g., .PARISC.milli)
	12	# OTHER_TEXT_SECTIONS - these get put in .text when relocating
	13	# OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ...
	14	# (e.g., .PARISC.global)
	15	# OTHER_RELRO_SECTIONS - other than .data.rel.ro ...
	16	# (e.g. PPC32 .fixup, .got[12])
	17	# OTHER_BSS_SECTIONS - other than .bss .sbss ...
	18	# OTHER_SECTIONS - at the end
	19	# EXECUTABLE_SYMBOLS - symbols that must be defined for an
	20	# executable (e.g., _DYNAMIC_LINK)
	21	# TEXT_START_ADDR - the first byte of the text segment, after any
	22	# headers.
	23	# TEXT_BASE_ADDRESS - the first byte of the text segment.
	24	# TEXT_START_SYMBOLS - symbols that appear at the start of the
	25	# .text section.
	26	# DATA_START_SYMBOLS - symbols that appear at the start of the
	27	# .data section.
	28	# OTHER_GOT_SYMBOLS - symbols defined just before .got.
	29	# OTHER_GOT_SECTIONS - sections just after .got.
	30	# OTHER_SDATA_SECTIONS - sections just after .sdata.
	31	# OTHER_BSS_SYMBOLS - symbols that appear at the start of the
	32	# .bss section besides __bss_start.
	33	# DATA_PLT - .plt should be in data segment, not text segment.
	34	# PLT_BEFORE_GOT - .plt just before .got when .plt is in data segement.
	35	# BSS_PLT - .plt should be in bss segment
	36	# TEXT_DYNAMIC - .dynamic in text segment, not data segment.
	37	# EMBEDDED - whether this is for an embedded system.
	38	# SHLIB_TEXT_START_ADDR - if set, add to SIZEOF_HEADERS to set
	39	# start address of shared library.
	40	# INPUT_FILES - INPUT command of files to always include
	41	# WRITABLE_RODATA - if set, the .rodata section should be writable
	42	# INIT_START, INIT_END - statements just before and just after
	43	# combination of .init sections.
	44	# FINI_START, FINI_END - statements just before and just after
	45	# combination of .fini sections.
	46	# STACK_ADDR - start of a .stack section.
	47	# OTHER_END_SYMBOLS - symbols to place right at the end of the script.
	48	# SEPARATE_GOTPLT - if set, .got.plt should be separate output section,
	49	# so that .got can be in the RELRO area. It should be set to
	50	# the number of bytes in the beginning of .got.plt which can be
	51	# in the RELRO area as well.
	52	#
	53	# When adding sections, do note that the names of some sections are used
	54	# when specifying the start address of the next.
	55	#
	56
	57	# Many sections come in three flavours. There is the 'real' section,
	58	# like ".data". Then there are the per-procedure or per-variable
	59	# sections, generated by -ffunction-sections and -fdata-sections in GCC,
	60	# and useful for --gc-sections, which for a variable "foo" might be
	61	# ".data.foo". Then there are the linkonce sections, for which the linker
	62	# eliminates duplicates, which are named like ".gnu.linkonce.d.foo".
	63	# The exact correspondences are:
	64	#
65	# Section Linkonce section
66	# .text .gnu.linkonce.t.foo
67	# .rodata .gnu.linkonce.r.foo
68	# .data .gnu.linkonce.d.foo
69	# .bss .gnu.linkonce.b.foo
70	# .sdata .gnu.linkonce.s.foo
71	# .sbss .gnu.linkonce.sb.foo
72	# .sdata2 .gnu.linkonce.s2.foo
73	# .sbss2 .gnu.linkonce.sb2.foo
74	# .debug_info .gnu.linkonce.wi.foo
75	# .tdata .gnu.linkonce.td.foo
76	# .tbss .gnu.linkonce.tb.foo
77	#
78	# Each of these can also have corresponding .rel.* and .rela.* sections.
79
80	test -z "$ENTRY" && ENTRY=_start
81	test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT}
82	test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
83	if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi
84	test -z "${ELFSIZE}" && ELFSIZE=32
85	test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8"
86	test "$LD_FLAG" = "N" && DATA_ADDR=.
87	test -n "$CREATE_SHLIB$CREATE_PIE" && test -n "$SHLIB_DATA_ADDR" && COMMONPAGESIZE=""
88	test -z "$CREATE_SHLIB$CREATE_PIE" && test -n "$DATA_ADDR" && COMMONPAGESIZE=""
89	test -n "$RELRO_NOW" && unset SEPARATE_GOTPLT
90	DATA_SEGMENT_ALIGN="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))"
91	DATA_SEGMENT_RELRO_END=""
92	DATA_SEGMENT_RELRO_GOTPLT_END=""
93	DATA_SEGMENT_END=""
94	if test -n "${COMMONPAGESIZE}"; then
95	DATA_SEGMENT_ALIGN="ALIGN (${SEGMENT_SIZE}) - ((${MAXPAGESIZE} - .) & (${MAXPAGESIZE} - 1)); . = DATA_SEGMENT_ALIGN (${MAXPAGESIZE}, ${COMMONPAGESIZE})"
96	DATA_SEGMENT_END=". = DATA_SEGMENT_END (.);"
97	if test -n "${SEPARATE_GOTPLT}"; then
98	DATA_SEGMENT_RELRO_GOTPLT_END=". = DATA_SEGMENT_RELRO_END (${SEPARATE_GOTPLT}, .);"
99	else
100	DATA_SEGMENT_RELRO_END=". = DATA_SEGMENT_RELRO_END (0, .);"
101	fi
102	fi
ec2d9b29 AM	103	INTERP=".interp ${RELOCATING-0} : { *(.interp) }"
ec2d9b29 AM	104	PLT=".plt ${RELOCATING-0} : { *(.plt) }"
19d9b7d3 DB	105	if test -z "$GOT"; then
19d9b7d3 DB	106	if test -z "$SEPARATE_GOTPLT"; then
ec2d9b29	107	GOT=".got ${RELOCATING-0} : { (.got.plt) (.got) }"
19d9b7d3	108	else
ec2d9b29	109	GOT=".got ${RELOCATING-0} : { *(.got) }"
19d9b7d3	110	GOTPLT="${RELOCATING+${DATA_SEGMENT_RELRO_GOTPLT_END}}
ec2d9b29	111	.got.plt ${RELOCATING-0} : { *(.got.plt) }"
19d9b7d3 DB	112	fi
19d9b7d3 DB	113	fi
ec2d9b29 AM	114	DYNAMIC=".dynamic ${RELOCATING-0} : { *(.dynamic) }"
ec2d9b29 AM	115	RODATA=".rodata ${RELOCATING-0} : { (.rodata${RELOCATING+ .rodata. .gnu.linkonce.r.*}) }"
18bbc1c5	116	DATARELRO=".data.rel.ro : { (.data.rel.ro.local) (.data.rel.ro .data.rel.ro.*) }"
43e56c34	117	DISCARDED="/DISCARD/ : { (.note.GNU-stack) (.gnu_debuglink) (.gnu.lto_) }"
19d9b7d3	118	if test -z "${NO_SMALL_DATA}"; then
ec2d9b29	119	SBSS=".sbss ${RELOCATING-0} :
19d9b7d3 DB	120	{
	121	${RELOCATING+PROVIDE (__sbss_start = .);}
	122	${RELOCATING+PROVIDE (___sbss_start = .);}
	123	${CREATE_SHLIB+(.sbss2 .sbss2. .gnu.linkonce.sb2.*)}
	124	*(.dynsbss)
	125	(.sbss${RELOCATING+ .sbss. .gnu.linkonce.sb.*})
	126	*(.scommon)
	127	${RELOCATING+PROVIDE (__sbss_end = .);}
	128	${RELOCATING+PROVIDE (___sbss_end = .);}
	129	}"
ec2d9b29	130	SBSS2=".sbss2 ${RELOCATING-0} : { (.sbss2${RELOCATING+ .sbss2. .gnu.linkonce.sb2.*}) }"
19d9b7d3 DB	131	SDATA="/* We want the small data sections together, so single-instruction offsets
	132	can access them all, and initialized data all before uninitialized, so
	133	we can shorten the on-disk segment size. */
ec2d9b29	134	.sdata ${RELOCATING-0} :
19d9b7d3 DB	135	{
	136	${RELOCATING+${SDATA_START_SYMBOLS}}
	137	${CREATE_SHLIB+(.sdata2 .sdata2. .gnu.linkonce.s2.*)}
	138	(.sdata${RELOCATING+ .sdata. .gnu.linkonce.s.*})
	139	}"
ec2d9b29 AM	140	SDATA2=".sdata2 ${RELOCATING-0} : { (.sdata2${RELOCATING+ .sdata2. .gnu.linkonce.s2.*}) }"
	141	REL_SDATA=".rel.sdata ${RELOCATING-0} : { (.rel.sdata${RELOCATING+ .rel.sdata. .rel.gnu.linkonce.s.*}) }
	142	.rela.sdata ${RELOCATING-0} : { (.rela.sdata${RELOCATING+ .rela.sdata. .rela.gnu.linkonce.s.*}) }"
	143	REL_SBSS=".rel.sbss ${RELOCATING-0} : { (.rel.sbss${RELOCATING+ .rel.sbss. .rel.gnu.linkonce.sb.*}) }
	144	.rela.sbss ${RELOCATING-0} : { (.rela.sbss${RELOCATING+ .rela.sbss. .rela.gnu.linkonce.sb.*}) }"
	145	REL_SDATA2=".rel.sdata2 ${RELOCATING-0} : { (.rel.sdata2${RELOCATING+ .rel.sdata2. .rel.gnu.linkonce.s2.*}) }
	146	.rela.sdata2 ${RELOCATING-0} : { (.rela.sdata2${RELOCATING+ .rela.sdata2. .rela.gnu.linkonce.s2.*}) }"
	147	REL_SBSS2=".rel.sbss2 ${RELOCATING-0} : { (.rel.sbss2${RELOCATING+ .rel.sbss2. .rel.gnu.linkonce.sb2.*}) }
	148	.rela.sbss2 ${RELOCATING-0} : { (.rela.sbss2${RELOCATING+ .rela.sbss2. .rela.gnu.linkonce.sb2.*}) }"
19d9b7d3 DB	149	else
	150	NO_SMALL_DATA=" "
	151	fi
	152	test -n "$SEPARATE_GOTPLT" && SEPARATE_GOTPLT=" "
ec2d9b29	153	CTOR=".ctors ${CONSTRUCTING-0} :
19d9b7d3 DB	154	{
	155	${CONSTRUCTING+${CTOR_START}}
	156	/* gcc uses crtbegin.o to find the start of
	157	the constructors, so we make sure it is
	158	first. Because this is a wildcard, it
	159	doesn't matter if the user does not
	160	actually link against crtbegin.o; the
	161	linker won't look for a file to match a
	162	wildcard. The wildcard also means that it
	163	doesn't matter which directory crtbegin.o
	164	is in. */
	165
	166	KEEP (crtbegin.o(.ctors))
	167
	168	/* We don't want to include the .ctor section from
	169	from the crtend.o file until after the sorted ctors.
	170	The .ctor section from the crtend file contains the
	171	end of ctors marker and it must be last */
	172
	173	KEEP ((EXCLUDE_FILE (crtend*.o $OTHER_EXCLUDE_FILES) .ctors))
	174	KEEP ((SORT(.ctors.)))
	175	KEEP (*(.ctors))
	176	${CONSTRUCTING+${CTOR_END}}
	177	}"
ec2d9b29	178	DTOR=".dtors ${CONSTRUCTING-0} :
19d9b7d3 DB	179	{
	180	${CONSTRUCTING+${DTOR_START}}
	181	KEEP (crtbegin.o(.dtors))
	182	KEEP ((EXCLUDE_FILE (crtend*.o $OTHER_EXCLUDE_FILES) .dtors))
	183	KEEP ((SORT(.dtors.)))
	184	KEEP (*(.dtors))
	185	${CONSTRUCTING+${DTOR_END}}
	186	}"
ec2d9b29	187	STACK=" .stack ${RELOCATING-0}${RELOCATING+${STACK_ADDR}} :
19d9b7d3 DB	188	{
	189	${RELOCATING+_stack = .;}
	190	*(.stack)
	191	}"
	192
	193	# if this is for an embedded system, don't add SIZEOF_HEADERS.
	194	if [ -z "$EMBEDDED" ]; then
	195	test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR} + SIZEOF_HEADERS"
	196	else
	197	test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR}"
	198	fi
	199
	200	cat <<EOF
	201	OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}",
	202	"${LITTLE_OUTPUT_FORMAT}")
	203	OUTPUT_ARCH(${OUTPUT_ARCH})
b34c1498	204	${RELOCATING+ENTRY(${ENTRY})}
19d9b7d3 DB	205
	206	${RELOCATING+${LIB_SEARCH_DIRS}}
	207	${RELOCATING+/* Do we need any of these for elf?
	208	__DYNAMIC = 0; ${STACKZERO+${STACKZERO}} ${SHLIB_PATH+${SHLIB_PATH}} */}
	209	${RELOCATING+${EXECUTABLE_SYMBOLS}}
	210	${RELOCATING+${INPUT_FILES}}
ec2d9b29 AM	211	${RELOCATING- /* For some reason, the Solaris linker makes bad executables
	212	if gld -r is used and the intermediate file has sections starting
	213	at non-zero addresses. Could be a Solaris ld bug, could be a GNU ld
	214	bug. But for now assigning the zero vmas works. */}
19d9b7d3 DB	215
	216	SECTIONS
	217	{
	218	/* Read-only sections, merged into text segment: */
	219	${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+PROVIDE (__executable_start = ${TEXT_START_ADDR}); . = ${TEXT_BASE_ADDRESS};}}}
	220	${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}}
	221	${CREATE_PIE+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}}
	222	${CREATE_SHLIB-${INTERP}}
	223	${INITIAL_READONLY_SECTIONS}
	224	${TEXT_DYNAMIC+${DYNAMIC}}
ec2d9b29 AM	225	.hash ${RELOCATING-0} : { *(.hash) }
	226	.dynsym ${RELOCATING-0} : { *(.dynsym) }
	227	.dynstr ${RELOCATING-0} : { *(.dynstr) }
	228	.gnu.version ${RELOCATING-0} : { *(.gnu.version) }
	229	.gnu.version_d ${RELOCATING-0}: { *(.gnu.version_d) }
	230	.gnu.version_r ${RELOCATING-0}: { *(.gnu.version_r) }
19d9b7d3 DB	231
	232	EOF
	233	if [ "x$COMBRELOC" = x ]; then
	234	COMBRELOCCAT=cat
	235	else
	236	COMBRELOCCAT="cat > $COMBRELOC"
	237	fi
	238	eval $COMBRELOCCAT <<EOF
ec2d9b29 AM	239	.rel.init ${RELOCATING-0} : { *(.rel.init) }
	240	.rela.init ${RELOCATING-0} : { *(.rela.init) }
	241	.rel.text ${RELOCATING-0} : { (.rel.text${RELOCATING+ .rel.text. .rel.gnu.linkonce.t.*}) }
	242	.rela.text ${RELOCATING-0} : { (.rela.text${RELOCATING+ .rela.text. .rela.gnu.linkonce.t.*}) }
	243	.rel.fini ${RELOCATING-0} : { *(.rel.fini) }
	244	.rela.fini ${RELOCATING-0} : { *(.rela.fini) }
	245	.rel.rodata ${RELOCATING-0} : { (.rel.rodata${RELOCATING+ .rel.rodata. .rel.gnu.linkonce.r.*}) }
	246	.rela.rodata ${RELOCATING-0} : { (.rela.rodata${RELOCATING+ .rela.rodata. .rela.gnu.linkonce.r.*}) }
19d9b7d3	247	${OTHER_READONLY_RELOC_SECTIONS}
18bbc1c5 CC	248	.rel.data.rel.ro ${RELOCATING-0} : { (.rel.data.rel.ro${RELOCATING+ .rel.data.rel.ro.}) }
18bbc1c5 CC	249	.rela.data.rel.ro ${RELOCATING-0} : { (.rela.data.rel.ro${RELOCATING+ .rela.data.rel.ro.}) }
ec2d9b29 AM	250	.rel.data ${RELOCATING-0} : { (.rel.data${RELOCATING+ .rel.data. .rel.gnu.linkonce.d.*}) }
	251	.rela.data ${RELOCATING-0} : { (.rela.data${RELOCATING+ .rela.data. .rela.gnu.linkonce.d.*}) }
	252	.rel.tdata ${RELOCATING-0} : { (.rel.tdata${RELOCATING+ .rel.tdata. .rel.gnu.linkonce.td.*}) }
	253	.rela.tdata ${RELOCATING-0} : { (.rela.tdata${RELOCATING+ .rela.tdata. .rela.gnu.linkonce.td.*}) }
	254	.rel.tbss ${RELOCATING-0} : { (.rel.tbss${RELOCATING+ .rel.tbss. .rel.gnu.linkonce.tb.*}) }
	255	.rela.tbss ${RELOCATING-0} : { (.rela.tbss${RELOCATING+ .rela.tbss. .rela.gnu.linkonce.tb.*}) }
	256	.rel.ctors ${RELOCATING-0} : { *(.rel.ctors) }
	257	.rela.ctors ${RELOCATING-0} : { *(.rela.ctors) }
	258	.rel.dtors ${RELOCATING-0} : { *(.rel.dtors) }
	259	.rela.dtors ${RELOCATING-0} : { *(.rela.dtors) }
	260	.rel.got ${RELOCATING-0} : { *(.rel.got) }
	261	.rela.got ${RELOCATING-0} : { *(.rela.got) }
19d9b7d3 DB	262	${OTHER_GOT_RELOC_SECTIONS}
	263	${REL_SDATA}
	264	${REL_SBSS}
	265	${REL_SDATA2}
	266	${REL_SBSS2}
ec2d9b29 AM	267	.rel.bss ${RELOCATING-0} : { (.rel.bss${RELOCATING+ .rel.bss. .rel.gnu.linkonce.b.*}) }
ec2d9b29 AM	268	.rela.bss ${RELOCATING-0} : { (.rela.bss${RELOCATING+ .rela.bss. .rela.gnu.linkonce.b.*}) }
19d9b7d3 DB	269	EOF
	270	if [ -n "$COMBRELOC" ]; then
	271	cat <<EOF
ec2d9b29	272	.rel.dyn ${RELOCATING-0} :
19d9b7d3 DB	273	{
	274	EOF
	275	sed -e '/^[ ][{}][ ]$/d;/:[ ]$/d;/\.rela\./d;s/^.: { \(.\)}$/ \1/' $COMBRELOC
	276	cat <<EOF
	277	}
ec2d9b29	278	.rela.dyn ${RELOCATING-0} :
19d9b7d3 DB	279	{
	280	EOF
	281	sed -e '/^[ ][{}][ ]$/d;/:[ ]$/d;/\.rel\./d;s/^.: { \(.\)}/ \1/' $COMBRELOC
	282	cat <<EOF
	283	}
	284	EOF
	285	fi
	286	cat <<EOF
ec2d9b29 AM	287	.rel.plt ${RELOCATING-0} : { *(.rel.plt) }
ec2d9b29 AM	288	.rela.plt ${RELOCATING-0} : { *(.rela.plt) }
19d9b7d3 DB	289	${OTHER_PLT_RELOC_SECTIONS}
19d9b7d3 DB	290
ec2d9b29	291	.init ${RELOCATING-0} :
19d9b7d3 DB	292	{
	293	${RELOCATING+${INIT_START}}
	294	KEEP (*(.init))
	295	${RELOCATING+${INIT_END}}
	296	} =${NOP-0}
	297
	298	${DATA_PLT-${BSS_PLT-${PLT}}}
ec2d9b29	299	.text ${RELOCATING-0} :
19d9b7d3 DB	300	{
	301	${RELOCATING+${TEXT_START_SYMBOLS}}
	302	(.text .stub${RELOCATING+ .text. .gnu.linkonce.t.*})
19d9b7d3 DB	303	/* .gnu.warning sections are handled specially by elf32.em. */
	304	*(.gnu.warning)
	305	${RELOCATING+${OTHER_TEXT_SECTIONS}}
	306	} =${NOP-0}
ec2d9b29	307	.fini ${RELOCATING-0} :
19d9b7d3 DB	308	{
	309	${RELOCATING+${FINI_START}}
	310	KEEP (*(.fini))
	311	${RELOCATING+${FINI_END}}
	312	} =${NOP-0}
	313	${RELOCATING+PROVIDE (__etext = .);}
	314	${RELOCATING+PROVIDE (_etext = .);}
	315	${RELOCATING+PROVIDE (etext = .);}
	316	${WRITABLE_RODATA-${RODATA}}
ec2d9b29	317	.rodata1 ${RELOCATING-0} : { *(.rodata1) }
19d9b7d3 DB	318	${CREATE_SHLIB-${SDATA2}}
	319	${CREATE_SHLIB-${SBSS2}}
	320	${OTHER_READONLY_SECTIONS}
	321	.eh_frame_hdr : { *(.eh_frame_hdr) }
ec2d9b29 AM	322	.eh_frame ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.eh_frame)) }
ec2d9b29 AM	323	.gcc_except_table ${RELOCATING-0} : ONLY_IF_RO { KEEP ((.gcc_except_table)) (.gcc_except_table.*) }
19d9b7d3 DB	324
	325	/* Adjust the address for the data segment. We want to adjust up to
	326	the same address within the page on the next page up. */
	327	${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+. = ${DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}}
	328	${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}
	329	${CREATE_PIE+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}
	330
	331	/* Exception handling */
ec2d9b29 AM	332	.eh_frame ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.eh_frame)) }
ec2d9b29 AM	333	.gcc_except_table ${RELOCATING-0} : ONLY_IF_RW { KEEP ((.gcc_except_table)) (.gcc_except_table.*) }
19d9b7d3 DB	334
19d9b7d3 DB	335	/* Thread Local Storage sections */
ec2d9b29 AM	336	.tdata ${RELOCATING-0} : { (.tdata${RELOCATING+ .tdata. .gnu.linkonce.td.*}) }
ec2d9b29 AM	337	.tbss ${RELOCATING-0} : { (.tbss${RELOCATING+ .tbss. .gnu.linkonce.tb.})${RELOCATING+ (.tcommon)} }
19d9b7d3	338
ec2d9b29 AM	339	.preinit_array ${RELOCATING-0} : { KEEP (*(.preinit_array)) }
	340	.init_array ${RELOCATING-0} : { KEEP (*(.init_array)) }
	341	.fini_array ${RELOCATING-0} : { KEEP (*(.fini_array)) }
19d9b7d3 DB	342
	343	${SMALL_DATA_CTOR-${RELOCATING+${CTOR}}}
	344	${SMALL_DATA_DTOR-${RELOCATING+${DTOR}}}
ec2d9b29	345	.jcr ${RELOCATING-0} : { KEEP (*(.jcr)) }
19d9b7d3 DB	346
	347	${RELOCATING+${DATARELRO}}
	348	${OTHER_RELRO_SECTIONS}
	349	${TEXT_DYNAMIC-${DYNAMIC}}
	350	${NO_SMALL_DATA+${RELRO_NOW+${GOT}}}
	351	${NO_SMALL_DATA+${RELRO_NOW-${SEPARATE_GOTPLT+${GOT}}}}
	352	${NO_SMALL_DATA+${RELRO_NOW-${SEPARATE_GOTPLT+${GOTPLT}}}}
	353	${RELOCATING+${DATA_SEGMENT_RELRO_END}}
	354	${NO_SMALL_DATA+${RELRO_NOW-${SEPARATE_GOTPLT-${GOT}}}}
	355
	356	${DATA_PLT+${PLT_BEFORE_GOT-${PLT}}}
	357
ec2d9b29	358	.data ${RELOCATING-0} :
19d9b7d3 DB	359	{
	360	${RELOCATING+${DATA_START_SYMBOLS}}
	361	(.data${RELOCATING+ .data. .gnu.linkonce.d.*})
19d9b7d3 DB	362	${CONSTRUCTING+SORT(CONSTRUCTORS)}
19d9b7d3 DB	363	}
ec2d9b29	364	.data1 ${RELOCATING-0} : { *(.data1) }
19d9b7d3 DB	365	${WRITABLE_RODATA+${RODATA}}
	366	${OTHER_READWRITE_SECTIONS}
	367	${SMALL_DATA_CTOR+${RELOCATING+${CTOR}}}
	368	${SMALL_DATA_DTOR+${RELOCATING+${DTOR}}}
	369	${DATA_PLT+${PLT_BEFORE_GOT+${PLT}}}
	370	${RELOCATING+${OTHER_GOT_SYMBOLS}}
	371	${NO_SMALL_DATA-${GOT}}
	372	${OTHER_GOT_SECTIONS}
	373	${SDATA}
	374	${OTHER_SDATA_SECTIONS}
	375	${RELOCATING+_edata = .;}
	376	${RELOCATING+PROVIDE (edata = .);}
	377	${RELOCATING+__bss_start = .;}
	378	${RELOCATING+${OTHER_BSS_SYMBOLS}}
	379	${SBSS}
	380	${BSS_PLT+${PLT}}
ec2d9b29	381	.bss ${RELOCATING-0} :
19d9b7d3 DB	382	{
	383	*(.dynbss)
	384	(.bss${RELOCATING+ .bss. .gnu.linkonce.b.*})
	385	*(COMMON)
	386	/* Align here to ensure that the .bss section occupies space up to
	387	_end. Align after .bss to ensure correct alignment even if the
	388	.bss section disappears because there are no input sections. */
	389	${RELOCATING+. = ALIGN(${ALIGNMENT});}
	390	}
	391	${OTHER_BSS_SECTIONS}
	392	${RELOCATING+. = ALIGN(${ALIGNMENT});}
	393	${RELOCATING+_end = .;}
	394	${RELOCATING+${OTHER_BSS_END_SYMBOLS}}
	395	${RELOCATING+PROVIDE (end = .);}
	396	${RELOCATING+${DATA_SEGMENT_END}}
	397
	398	/* Stabs debugging sections. */
	399	.stab 0 : { *(.stab) }
	400	.stabstr 0 : { *(.stabstr) }
	401	.stab.excl 0 : { *(.stab.excl) }
	402	.stab.exclstr 0 : { *(.stab.exclstr) }
	403	.stab.index 0 : { *(.stab.index) }
	404	.stab.indexstr 0 : { *(.stab.indexstr) }
	405
	406	.comment 0 : { *(.comment) }
	407
ceb0a680	408	EOF
2a995fc1	409
d061dfac	410	. $srcdir/scripttempl/DWARF.sc
2a995fc1	411
ceb0a680	412	cat <<EOF
19d9b7d3 DB	413	${STACK_ADDR+${STACK}}
	414	${OTHER_SECTIONS}
	415	${RELOCATING+${OTHER_END_SYMBOLS}}
1c68693b	416	${RELOCATING+${DISCARDED}}
19d9b7d3 DB	417	}
19d9b7d3 DB	418	EOF