Commit | Line | Data |
---|---|---|
39423523 DD |
1 | @c Automatically generated from *.c and others (the comments before |
2 | @c each entry tell you which file and where in that file). DO NOT EDIT! | |
3 | @c Edit the *.c files, configure with --enable-maintainer-mode, | |
4 | @c and let gather-docs build you a new copy. | |
5 | ||
b109e79a | 6 | @c safe-ctype.c:25 |
70ecf948 DD |
7 | @defvr Extension HOST_CHARSET |
8 | This macro indicates the basic character set and encoding used by the | |
9 | host: more precisely, the encoding used for character constants in | |
10 | preprocessor @samp{#if} statements (the C "execution character set"). | |
11 | It is defined by @file{safe-ctype.h}, and will be an integer constant | |
12 | with one of the following values: | |
13 | ||
14 | @ftable @code | |
15 | @item HOST_CHARSET_UNKNOWN | |
16 | The host character set is unknown - that is, not one of the next two | |
17 | possibilities. | |
18 | ||
19 | @item HOST_CHARSET_ASCII | |
20 | The host character set is ASCII. | |
21 | ||
22 | @item HOST_CHARSET_EBCDIC | |
23 | The host character set is some variant of EBCDIC. (Only one of the | |
24 | nineteen EBCDIC varying characters is tested; exercise caution.) | |
25 | @end ftable | |
26 | @end defvr | |
27 | ||
39423523 | 28 | @c alloca.c:26 |
99b58139 | 29 | @deftypefn Replacement void* alloca (size_t @var{size}) |
39423523 DD |
30 | |
31 | This function allocates memory which will be automatically reclaimed | |
32 | after the procedure exits. The @libib{} implementation does not free | |
33 | the memory immediately but will do so eventually during subsequent | |
34 | calls to this function. Memory is allocated using @code{xmalloc} under | |
35 | normal circumstances. | |
36 | ||
37 | The header file @file{alloca-conf.h} can be used in conjunction with the | |
38 | GNU Autoconf test @code{AC_FUNC_ALLOCA} to test for and properly make | |
39 | available this function. The @code{AC_FUNC_ALLOCA} test requires that | |
40 | client code use a block of preprocessor code to be safe (see the Autoconf | |
41 | manual for more); this header incorporates that logic and more, including | |
99b58139 | 42 | the possibility of a GCC built-in function. |
39423523 DD |
43 | |
44 | @end deftypefn | |
45 | ||
c631edf1 | 46 | @c asprintf.c:32 |
5d852400 | 47 | @deftypefn Extension int asprintf (char **@var{resptr}, const char *@var{format}, ...) |
ba19b94f DD |
48 | |
49 | Like @code{sprintf}, but instead of passing a pointer to a buffer, you | |
50 | pass a pointer to a pointer. This function will compute the size of | |
51 | the buffer needed, allocate memory with @code{malloc}, and store a | |
52 | pointer to the allocated memory in @code{*@var{resptr}}. The value | |
53 | returned is the same as @code{sprintf} would return. If memory could | |
5a4e47bd | 54 | not be allocated, minus one is returned and @code{NULL} is stored in |
ba19b94f DD |
55 | @code{*@var{resptr}}. |
56 | ||
57 | @end deftypefn | |
58 | ||
39423523 DD |
59 | @c atexit.c:6 |
60 | @deftypefn Supplemental int atexit (void (*@var{f})()) | |
61 | ||
62 | Causes function @var{f} to be called at exit. Returns 0. | |
63 | ||
64 | @end deftypefn | |
65 | ||
66 | @c basename.c:6 | |
67 | @deftypefn Supplemental char* basename (const char *@var{name}) | |
68 | ||
69 | Returns a pointer to the last component of pathname @var{name}. | |
70 | Behavior is undefined if the pathname ends in a directory separator. | |
71 | ||
72 | @end deftypefn | |
73 | ||
74 | @c bcmp.c:6 | |
75 | @deftypefn Supplemental int bcmp (char *@var{x}, char *@var{y}, int @var{count}) | |
76 | ||
77 | Compares the first @var{count} bytes of two areas of memory. Returns | |
56056af5 DD |
78 | zero if they are the same, nonzero otherwise. Returns zero if |
79 | @var{count} is zero. A nonzero result only indicates a difference, | |
39423523 DD |
80 | it does not indicate any sorting order (say, by having a positive |
81 | result mean @var{x} sorts before @var{y}). | |
82 | ||
83 | @end deftypefn | |
84 | ||
85 | @c bcopy.c:3 | |
86 | @deftypefn Supplemental void bcopy (char *@var{in}, char *@var{out}, int @var{length}) | |
87 | ||
88 | Copies @var{length} bytes from memory region @var{in} to region | |
89 | @var{out}. The use of @code{bcopy} is deprecated in new programs. | |
90 | ||
91 | @end deftypefn | |
92 | ||
93 | @c bsearch.c:33 | |
94 | @deftypefn Supplemental void* bsearch (const void *@var{key}, const void *@var{base}, size_t @var{nmemb}, size_t @var{size}, int (*@var{compar})(const void *, const void *)) | |
95 | ||
96 | Performs a search over an array of @var{nmemb} elements pointed to by | |
97 | @var{base} for a member that matches the object pointed to by @var{key}. | |
98 | The size of each member is specified by @var{size}. The array contents | |
99 | should be sorted in ascending order according to the @var{compar} | |
100 | comparison function. This routine should take two arguments pointing to | |
101 | the @var{key} and to an array member, in that order, and should return an | |
102 | integer less than, equal to, or greater than zero if the @var{key} object | |
fa9f0e33 | 103 | is respectively less than, matching, or greater than the array member. |
39423523 DD |
104 | |
105 | @end deftypefn | |
106 | ||
c631edf1 | 107 | @c argv.c:124 |
ba19b94f DD |
108 | @deftypefn Extension char** buildargv (char *@var{sp}) |
109 | ||
110 | Given a pointer to a string, parse the string extracting fields | |
111 | separated by whitespace and optionally enclosed within either single | |
112 | or double quotes (which are stripped off), and build a vector of | |
113 | pointers to copies of the string for each field. The input string | |
114 | remains unchanged. The last element of the vector is followed by a | |
115 | @code{NULL} element. | |
116 | ||
117 | All of the memory for the pointer array and copies of the string | |
118 | is obtained from @code{malloc}. All of the memory can be returned to the | |
119 | system with the single function call @code{freeargv}, which takes the | |
120 | returned result of @code{buildargv}, as it's argument. | |
121 | ||
5d852400 | 122 | Returns a pointer to the argument vector if successful. Returns |
ba19b94f DD |
123 | @code{NULL} if @var{sp} is @code{NULL} or if there is insufficient |
124 | memory to complete building the argument vector. | |
125 | ||
126 | If the input is a null string (as opposed to a @code{NULL} pointer), | |
127 | then buildarg returns an argument vector that has one arg, a null | |
128 | string. | |
129 | ||
130 | @end deftypefn | |
131 | ||
39423523 DD |
132 | @c bzero.c:6 |
133 | @deftypefn Supplemental void bzero (char *@var{mem}, int @var{count}) | |
134 | ||
fa9f0e33 | 135 | Zeros @var{count} bytes starting at @var{mem}. Use of this function |
39423523 DD |
136 | is deprecated in favor of @code{memset}. |
137 | ||
138 | @end deftypefn | |
139 | ||
140 | @c calloc.c:6 | |
141 | @deftypefn Supplemental void* calloc (size_t @var{nelem}, size_t @var{elsize}) | |
142 | ||
143 | Uses @code{malloc} to allocate storage for @var{nelem} objects of | |
144 | @var{elsize} bytes each, then zeros the memory. | |
145 | ||
146 | @end deftypefn | |
147 | ||
ba19b94f | 148 | @c choose-temp.c:42 |
5d852400 | 149 | @deftypefn Extension char* choose_temp_base (void) |
ba19b94f DD |
150 | |
151 | Return a prefix for temporary file names or @code{NULL} if unable to | |
152 | find one. The current directory is chosen if all else fails so the | |
153 | program is exited if a temporary directory can't be found (@code{mktemp} | |
154 | fails). The buffer for the result is obtained with @code{xmalloc}. | |
155 | ||
156 | This function is provided for backwards compatability only. Its use is | |
157 | not recommended. | |
158 | ||
159 | @end deftypefn | |
160 | ||
b109e79a | 161 | @c make-temp-file.c:87 |
ba19b94f DD |
162 | @deftypefn Replacement char* choose_tmpdir () |
163 | ||
164 | Returns a pointer to a directory path suitable for creating temporary | |
165 | files in. | |
166 | ||
167 | @end deftypefn | |
168 | ||
39423523 | 169 | @c clock.c:27 |
99b58139 | 170 | @deftypefn Supplemental long clock (void) |
39423523 DD |
171 | |
172 | Returns an approximation of the CPU time used by the process as a | |
173 | @code{clock_t}; divide this number by @samp{CLOCKS_PER_SEC} to get the | |
174 | number of seconds used. | |
175 | ||
176 | @end deftypefn | |
177 | ||
ba19b94f | 178 | @c concat.c:24 |
5d852400 | 179 | @deftypefn Extension char* concat (const char *@var{s1}, const char *@var{s2}, @dots{}, @code{NULL}) |
ba19b94f DD |
180 | |
181 | Concatenate zero or more of strings and return the result in freshly | |
5d852400 | 182 | @code{xmalloc}ed memory. Returns @code{NULL} if insufficient memory is |
ba19b94f DD |
183 | available. The argument list is terminated by the first @code{NULL} |
184 | pointer encountered. Pointers to empty strings are ignored. | |
185 | ||
186 | @end deftypefn | |
187 | ||
c631edf1 | 188 | @c argv.c:52 |
ba19b94f DD |
189 | @deftypefn Extension char** dupargv (char **@var{vector}) |
190 | ||
191 | Duplicate an argument vector. Simply scans through @var{vector}, | |
192 | duplicating each argument until the terminating @code{NULL} is found. | |
5d852400 | 193 | Returns a pointer to the argument vector if successful. Returns |
ba19b94f DD |
194 | @code{NULL} if there is insufficient memory to complete building the |
195 | argument vector. | |
196 | ||
197 | @end deftypefn | |
198 | ||
b5c3b3de | 199 | @c strerror.c:567 |
ba19b94f | 200 | @deftypefn Extension int errno_max (void) |
39423523 DD |
201 | |
202 | Returns the maximum @code{errno} value for which a corresponding | |
203 | symbolic name or message is available. Note that in the case where we | |
204 | use the @code{sys_errlist} supplied by the system, it is possible for | |
205 | there to be more symbolic names than messages, or vice versa. In | |
206 | fact, the manual page for @code{perror(3C)} explicitly warns that one | |
207 | should check the size of the table (@code{sys_nerr}) before indexing | |
208 | it, since new error codes may be added to the system before they are | |
209 | added to the table. Thus @code{sys_nerr} might be smaller than value | |
99b58139 | 210 | implied by the largest @code{errno} value defined in @code{<errno.h>}. |
39423523 DD |
211 | |
212 | We return the maximum value that can be used to obtain a meaningful | |
213 | symbolic name or message. | |
214 | ||
215 | @end deftypefn | |
216 | ||
ba19b94f DD |
217 | @c fdmatch.c:23 |
218 | @deftypefn Extension int fdmatch (int @var{fd1}, int @var{fd2}) | |
219 | ||
220 | Check to see if two open file descriptors refer to the same file. | |
221 | This is useful, for example, when we have an open file descriptor for | |
222 | an unnamed file, and the name of a file that we believe to correspond | |
223 | to that fd. This can happen when we are exec'd with an already open | |
224 | file (@code{stdout} for example) or from the SVR4 @file{/proc} calls | |
225 | that return open file descriptors for mapped address spaces. All we | |
226 | have to do is open the file by name and check the two file descriptors | |
227 | for a match, which is done by comparing major and minor device numbers | |
228 | and inode numbers. | |
229 | ||
230 | @end deftypefn | |
231 | ||
c631edf1 | 232 | @c fopen_unlocked.c:48 |
e9edcedc | 233 | @deftypefn Extension {FILE *} fdopen_unlocked (int @var{fildes}, const char * @var{mode}) |
ac119ae8 DD |
234 | |
235 | Opens and returns a @code{FILE} pointer via @code{fdopen}. If the | |
236 | operating system supports it, ensure that the stream is setup to avoid | |
237 | any multi-threaded locking. Otherwise return the @code{FILE} pointer | |
238 | unchanged. | |
239 | ||
240 | @end deftypefn | |
241 | ||
ba19b94f DD |
242 | @c ffs.c:3 |
243 | @deftypefn Supplemental int ffs (int @var{valu}) | |
244 | ||
5d852400 | 245 | Find the first (least significant) bit set in @var{valu}. Bits are |
ba19b94f DD |
246 | numbered from right to left, starting with bit 1 (corresponding to the |
247 | value 1). If @var{valu} is zero, zero is returned. | |
248 | ||
249 | @end deftypefn | |
250 | ||
251 | @c fnmatch.txh:1 | |
252 | @deftypefn Replacement int fnmatch (const char *@var{pattern}, const char *@var{string}, int @var{flags}) | |
253 | ||
254 | Matches @var{string} against @var{pattern}, returning zero if it | |
255 | matches, @code{FNM_NOMATCH} if not. @var{pattern} may contain the | |
256 | wildcards @code{?} to match any one character, @code{*} to match any | |
257 | zero or more characters, or a set of alternate characters in square | |
258 | brackets, like @samp{[a-gt8]}, which match one character (@code{a} | |
259 | through @code{g}, or @code{t}, or @code{8}, in this example) if that one | |
5d852400 | 260 | character is in the set. A set may be inverted (i.e., match anything |
ba19b94f DD |
261 | except what's in the set) by giving @code{^} or @code{!} as the first |
262 | character in the set. To include those characters in the set, list them | |
263 | as anything other than the first character of the set. To include a | |
264 | dash in the set, list it last in the set. A backslash character makes | |
265 | the following character not special, so for example you could match | |
266 | against a literal asterisk with @samp{\*}. To match a literal | |
267 | backslash, use @samp{\\}. | |
268 | ||
269 | @code{flags} controls various aspects of the matching process, and is a | |
270 | boolean OR of zero or more of the following values (defined in | |
5d852400 | 271 | @code{<fnmatch.h>}): |
ba19b94f DD |
272 | |
273 | @table @code | |
274 | ||
275 | @item FNM_PATHNAME | |
276 | @itemx FNM_FILE_NAME | |
277 | @var{string} is assumed to be a path name. No wildcard will ever match | |
278 | @code{/}. | |
279 | ||
280 | @item FNM_NOESCAPE | |
281 | Do not interpret backslashes as quoting the following special character. | |
282 | ||
283 | @item FNM_PERIOD | |
284 | A leading period (at the beginning of @var{string}, or if | |
285 | @code{FNM_PATHNAME} after a slash) is not matched by @code{*} or | |
286 | @code{?} but must be matched explicitly. | |
287 | ||
288 | @item FNM_LEADING_DIR | |
289 | Means that @var{string} also matches @var{pattern} if some initial part | |
290 | of @var{string} matches, and is followed by @code{/} and zero or more | |
291 | characters. For example, @samp{foo*} would match either @samp{foobar} | |
292 | or @samp{foobar/grill}. | |
293 | ||
294 | @item FNM_CASEFOLD | |
295 | Ignores case when performing the comparison. | |
296 | ||
297 | @end table | |
298 | ||
299 | @end deftypefn | |
300 | ||
c631edf1 | 301 | @c fopen_unlocked.c:39 |
e9edcedc | 302 | @deftypefn Extension {FILE *} fopen_unlocked (const char *@var{path}, const char * @var{mode}) |
ac119ae8 DD |
303 | |
304 | Opens and returns a @code{FILE} pointer via @code{fopen}. If the | |
305 | operating system supports it, ensure that the stream is setup to avoid | |
306 | any multi-threaded locking. Otherwise return the @code{FILE} pointer | |
307 | unchanged. | |
308 | ||
309 | @end deftypefn | |
310 | ||
c631edf1 | 311 | @c argv.c:97 |
ba19b94f DD |
312 | @deftypefn Extension void freeargv (char **@var{vector}) |
313 | ||
314 | Free an argument vector that was built using @code{buildargv}. Simply | |
315 | scans through @var{vector}, freeing the memory for each argument until | |
316 | the terminating @code{NULL} is found, and then frees @var{vector} | |
317 | itself. | |
318 | ||
319 | @end deftypefn | |
320 | ||
c631edf1 | 321 | @c fopen_unlocked.c:57 |
e9edcedc | 322 | @deftypefn Extension {FILE *} freopen_unlocked (const char * @var{path}, const char * @var{mode}, FILE * @var{stream}) |
ac119ae8 DD |
323 | |
324 | Opens and returns a @code{FILE} pointer via @code{freopen}. If the | |
325 | operating system supports it, ensure that the stream is setup to avoid | |
326 | any multi-threaded locking. Otherwise return the @code{FILE} pointer | |
327 | unchanged. | |
328 | ||
329 | @end deftypefn | |
330 | ||
2a80c0a4 | 331 | @c getruntime.c:82 |
5d852400 | 332 | @deftypefn Replacement long get_run_time (void) |
ba19b94f DD |
333 | |
334 | Returns the time used so far, in microseconds. If possible, this is | |
335 | the time used by this process, else it is the elapsed time since the | |
336 | process started. | |
337 | ||
338 | @end deftypefn | |
339 | ||
39423523 | 340 | @c getcwd.c:6 |
99b58139 | 341 | @deftypefn Supplemental char* getcwd (char *@var{pathname}, int @var{len}) |
39423523 DD |
342 | |
343 | Copy the absolute pathname for the current working directory into | |
344 | @var{pathname}, which is assumed to point to a buffer of at least | |
345 | @var{len} bytes, and return a pointer to the buffer. If the current | |
346 | directory's path doesn't fit in @var{len} characters, the result is | |
99b58139 | 347 | @code{NULL} and @code{errno} is set. If @var{pathname} is a null pointer, |
39423523 DD |
348 | @code{getcwd} will obtain @var{len} bytes of space using |
349 | @code{malloc}. | |
350 | ||
351 | @end deftypefn | |
352 | ||
353 | @c getpagesize.c:5 | |
99b58139 | 354 | @deftypefn Supplemental int getpagesize (void) |
39423523 DD |
355 | |
356 | Returns the number of bytes in a page of memory. This is the | |
357 | granularity of many of the system memory management routines. No | |
358 | guarantee is made as to whether or not it is the same as the basic | |
359 | memory management hardware page size. | |
360 | ||
361 | @end deftypefn | |
362 | ||
363 | @c getpwd.c:5 | |
99b58139 | 364 | @deftypefn Supplemental char* getpwd (void) |
39423523 DD |
365 | |
366 | Returns the current working directory. This implementation caches the | |
367 | result on the assumption that the process will not call @code{chdir} | |
368 | between calls to @code{getpwd}. | |
369 | ||
370 | @end deftypefn | |
371 | ||
0fad4bdb | 372 | @c gettimeofday.c:12 |
0e867e79 | 373 | @deftypefn Supplemental int gettimeofday (struct timeval *@var{tp}, void *@var{tz}) |
0fad4bdb DD |
374 | |
375 | Writes the current time to @var{tp}. This implementation requires | |
376 | that @var{tz} be NULL. Returns 0 on success, -1 on failure. | |
377 | ||
378 | @end deftypefn | |
379 | ||
c631edf1 | 380 | @c hex.c:33 |
7dd4d42a DD |
381 | @deftypefn Extension void hex_init (void) |
382 | ||
383 | Initializes the array mapping the current character set to | |
384 | corresponding hex values. This function must be called before any | |
2a80c0a4 DD |
385 | call to @code{hex_p} or @code{hex_value}. If you fail to call it, a |
386 | default ASCII-based table will normally be used on ASCII systems. | |
7dd4d42a DD |
387 | |
388 | @end deftypefn | |
389 | ||
c631edf1 | 390 | @c hex.c:42 |
7dd4d42a DD |
391 | @deftypefn Extension int hex_p (int @var{c}) |
392 | ||
393 | Evaluates to non-zero if the given character is a valid hex character, | |
394 | or zero if it is not. Note that the value you pass will be cast to | |
395 | @code{unsigned char} within the macro. | |
396 | ||
397 | @end deftypefn | |
398 | ||
c631edf1 | 399 | @c hex.c:50 |
b5c3b3de | 400 | @deftypefn Extension {unsigned int} hex_value (int @var{c}) |
7dd4d42a DD |
401 | |
402 | Returns the numeric equivalent of the given character when interpreted | |
403 | as a hexidecimal digit. The result is undefined if you pass an | |
404 | invalid hex digit. Note that the value you pass will be cast to | |
405 | @code{unsigned char} within the macro. | |
406 | ||
e4f79046 JB |
407 | The @code{hex_value} macro returns @code{unsigned int}, rather than |
408 | signed @code{int}, to make it easier to use in parsing addresses from | |
409 | hex dump files: a signed @code{int} would be sign-extended when | |
410 | converted to a wider unsigned type --- like @code{bfd_vma}, on some | |
411 | systems. | |
412 | ||
7dd4d42a DD |
413 | @end deftypefn |
414 | ||
39423523 DD |
415 | @c index.c:5 |
416 | @deftypefn Supplemental char* index (char *@var{s}, int @var{c}) | |
417 | ||
fa9f0e33 | 418 | Returns a pointer to the first occurrence of the character @var{c} in |
99b58139 | 419 | the string @var{s}, or @code{NULL} if not found. The use of @code{index} is |
39423523 DD |
420 | deprecated in new programs in favor of @code{strchr}. |
421 | ||
422 | @end deftypefn | |
423 | ||
ba19b94f DD |
424 | @c insque.c:6 |
425 | @deftypefn Supplemental void insque (struct qelem *@var{elem}, struct qelem *@var{pred}) | |
426 | @deftypefnx Supplemental void remque (struct qelem *@var{elem}) | |
427 | ||
428 | Routines to manipulate queues built from doubly linked lists. The | |
429 | @code{insque} routine inserts @var{elem} in the queue immediately | |
430 | after @var{pred}. The @code{remque} routine removes @var{elem} from | |
431 | its containing queue. These routines expect to be passed pointers to | |
432 | structures which have as their first members a forward pointer and a | |
433 | back pointer, like this prototype (although no prototype is provided): | |
434 | ||
435 | @example | |
436 | struct qelem @{ | |
437 | struct qelem *q_forw; | |
438 | struct qelem *q_back; | |
439 | char q_data[]; | |
440 | @}; | |
441 | @end example | |
442 | ||
443 | @end deftypefn | |
444 | ||
b109e79a | 445 | @c safe-ctype.c:46 |
70ecf948 DD |
446 | @deffn Extension ISALPHA (@var{c}) |
447 | @deffnx Extension ISALNUM (@var{c}) | |
448 | @deffnx Extension ISBLANK (@var{c}) | |
449 | @deffnx Extension ISCNTRL (@var{c}) | |
450 | @deffnx Extension ISDIGIT (@var{c}) | |
451 | @deffnx Extension ISGRAPH (@var{c}) | |
452 | @deffnx Extension ISLOWER (@var{c}) | |
453 | @deffnx Extension ISPRINT (@var{c}) | |
454 | @deffnx Extension ISPUNCT (@var{c}) | |
455 | @deffnx Extension ISSPACE (@var{c}) | |
456 | @deffnx Extension ISUPPER (@var{c}) | |
457 | @deffnx Extension ISXDIGIT (@var{c}) | |
458 | ||
459 | These twelve macros are defined by @file{safe-ctype.h}. Each has the | |
460 | same meaning as the corresponding macro (with name in lowercase) | |
461 | defined by the standard header @file{ctype.h}. For example, | |
462 | @code{ISALPHA} returns true for alphabetic characters and false for | |
463 | others. However, there are two differences between these macros and | |
464 | those provided by @file{ctype.h}: | |
465 | ||
466 | @itemize @bullet | |
467 | @item These macros are guaranteed to have well-defined behavior for all | |
468 | values representable by @code{signed char} and @code{unsigned char}, and | |
469 | for @code{EOF}. | |
470 | ||
471 | @item These macros ignore the current locale; they are true for these | |
472 | fixed sets of characters: | |
473 | @multitable {@code{XDIGIT}} {yada yada yada yada yada yada yada yada} | |
474 | @item @code{ALPHA} @tab @kbd{A-Za-z} | |
475 | @item @code{ALNUM} @tab @kbd{A-Za-z0-9} | |
476 | @item @code{BLANK} @tab @kbd{space tab} | |
477 | @item @code{CNTRL} @tab @code{!PRINT} | |
478 | @item @code{DIGIT} @tab @kbd{0-9} | |
479 | @item @code{GRAPH} @tab @code{ALNUM || PUNCT} | |
480 | @item @code{LOWER} @tab @kbd{a-z} | |
481 | @item @code{PRINT} @tab @code{GRAPH ||} @kbd{space} | |
482 | @item @code{PUNCT} @tab @kbd{`~!@@#$%^&*()_-=+[@{]@}\|;:'",<.>/?} | |
483 | @item @code{SPACE} @tab @kbd{space tab \n \r \f \v} | |
484 | @item @code{UPPER} @tab @kbd{A-Z} | |
485 | @item @code{XDIGIT} @tab @kbd{0-9A-Fa-f} | |
486 | @end multitable | |
487 | ||
488 | Note that, if the host character set is ASCII or a superset thereof, | |
489 | all these macros will return false for all values of @code{char} outside | |
490 | the range of 7-bit ASCII. In particular, both ISPRINT and ISCNTRL return | |
491 | false for characters with numeric values from 128 to 255. | |
492 | @end itemize | |
493 | @end deffn | |
494 | ||
b109e79a | 495 | @c safe-ctype.c:95 |
70ecf948 DD |
496 | @deffn Extension ISIDNUM (@var{c}) |
497 | @deffnx Extension ISIDST (@var{c}) | |
498 | @deffnx Extension IS_VSPACE (@var{c}) | |
499 | @deffnx Extension IS_NVSPACE (@var{c}) | |
500 | @deffnx Extension IS_SPACE_OR_NUL (@var{c}) | |
501 | @deffnx Extension IS_ISOBASIC (@var{c}) | |
502 | These six macros are defined by @file{safe-ctype.h} and provide | |
503 | additional character classes which are useful when doing lexical | |
504 | analysis of C or similar languages. They are true for the following | |
505 | sets of characters: | |
506 | ||
507 | @multitable {@code{SPACE_OR_NUL}} {yada yada yada yada yada yada yada yada} | |
508 | @item @code{IDNUM} @tab @kbd{A-Za-z0-9_} | |
509 | @item @code{IDST} @tab @kbd{A-Za-z_} | |
510 | @item @code{VSPACE} @tab @kbd{\r \n} | |
511 | @item @code{NVSPACE} @tab @kbd{space tab \f \v \0} | |
512 | @item @code{SPACE_OR_NUL} @tab @code{VSPACE || NVSPACE} | |
513 | @item @code{ISOBASIC} @tab @code{VSPACE || NVSPACE || PRINT} | |
514 | @end multitable | |
515 | @end deffn | |
516 | ||
ba19b94f DD |
517 | @c lbasename.c:23 |
518 | @deftypefn Replacement {const char*} lbasename (const char *@var{name}) | |
519 | ||
520 | Given a pointer to a string containing a typical pathname | |
521 | (@samp{/usr/src/cmd/ls/ls.c} for example), returns a pointer to the | |
522 | last component of the pathname (@samp{ls.c} in this case). The | |
523 | returned pointer is guaranteed to lie within the original | |
524 | string. This latter fact is not true of many vendor C | |
525 | libraries, which return special strings or modify the passed | |
526 | strings for particular input. | |
527 | ||
528 | In particular, the empty string returns the same empty string, | |
529 | and a path ending in @code{/} returns the empty string after it. | |
530 | ||
531 | @end deftypefn | |
532 | ||
ba61a412 DJ |
533 | @c lrealpath.c:25 |
534 | @deftypefn Replacement {const char*} lrealpath (const char *@var{name}) | |
535 | ||
536 | Given a pointer to a string containing a pathname, returns a canonical | |
537 | version of the filename. Symlinks will be resolved, and ``.'' and ``..'' | |
538 | components will be simplified. The returned value will be allocated using | |
10b57b38 | 539 | @code{malloc}, or @code{NULL} will be returned on a memory allocation error. |
2a80c0a4 | 540 | |
ba61a412 | 541 | @end deftypefn |
2a80c0a4 | 542 | |
ba61a412 DJ |
543 | @c make-relative-prefix.c:24 |
544 | @deftypefn Extension {const char*} make_relative_prefix (const char *@var{progname}, const char *@var{bin_prefix}, const char *@var{prefix}) | |
2a80c0a4 | 545 | |
ba61a412 DJ |
546 | Given three paths @var{progname}, @var{bin_prefix}, @var{prefix}, |
547 | return the path that is in the same position relative to | |
548 | @var{progname}'s directory as @var{prefix} is relative to | |
549 | @var{bin_prefix}. That is, a string starting with the directory | |
550 | portion of @var{progname}, followed by a relative pathname of the | |
551 | difference between @var{bin_prefix} and @var{prefix}. | |
552 | ||
553 | If @var{progname} does not contain any directory separators, | |
554 | @code{make_relative_prefix} will search @env{PATH} to find a program | |
555 | named @var{progname}. Also, if @var{progname} is a symbolic link, | |
556 | the symbolic link will be resolved. | |
557 | ||
558 | For example, if @var{bin_prefix} is @code{/alpha/beta/gamma/gcc/delta}, | |
559 | @var{prefix} is @code{/alpha/beta/gamma/omega/}, and @var{progname} is | |
560 | @code{/red/green/blue/gcc}, then this function will return | |
561 | @code{/red/green/blue/../../omega/}. | |
562 | ||
563 | The return value is normally allocated via @code{malloc}. If no | |
564 | relative prefix can be found, return @code{NULL}. | |
2a80c0a4 DD |
565 | |
566 | @end deftypefn | |
567 | ||
b109e79a | 568 | @c make-temp-file.c:137 |
ba19b94f DD |
569 | @deftypefn Replacement char* make_temp_file (const char *@var{suffix}) |
570 | ||
571 | Return a temporary file name (as a string) or @code{NULL} if unable to | |
572 | create one. @var{suffix} is a suffix to append to the file name. The | |
5d852400 | 573 | string is @code{malloc}ed, and the temporary file has been created. |
ba19b94f DD |
574 | |
575 | @end deftypefn | |
576 | ||
39423523 DD |
577 | @c memchr.c:3 |
578 | @deftypefn Supplemental void* memchr (const void *@var{s}, int @var{c}, size_t @var{n}) | |
579 | ||
99b58139 | 580 | This function searches memory starting at @code{*@var{s}} for the |
39423523 DD |
581 | character @var{c}. The search only ends with the first occurrence of |
582 | @var{c}, or after @var{length} characters; in particular, a null | |
583 | character does not terminate the search. If the character @var{c} is | |
99b58139 DD |
584 | found within @var{length} characters of @code{*@var{s}}, a pointer |
585 | to the character is returned. If @var{c} is not found, then @code{NULL} is | |
39423523 DD |
586 | returned. |
587 | ||
588 | @end deftypefn | |
589 | ||
590 | @c memcmp.c:6 | |
591 | @deftypefn Supplemental int memcmp (const void *@var{x}, const void *@var{y}, size_t @var{count}) | |
592 | ||
593 | Compares the first @var{count} bytes of two areas of memory. Returns | |
594 | zero if they are the same, a value less than zero if @var{x} is | |
595 | lexically less than @var{y}, or a value greater than zero if @var{x} | |
596 | is lexically greater than @var{y}. Note that lexical order is determined | |
597 | as if comparing unsigned char arrays. | |
598 | ||
599 | @end deftypefn | |
600 | ||
601 | @c memcpy.c:6 | |
602 | @deftypefn Supplemental void* memcpy (void *@var{out}, const void *@var{in}, size_t @var{length}) | |
603 | ||
604 | Copies @var{length} bytes from memory region @var{in} to region | |
605 | @var{out}. Returns a pointer to @var{out}. | |
606 | ||
607 | @end deftypefn | |
608 | ||
609 | @c memmove.c:6 | |
610 | @deftypefn Supplemental void* memmove (void *@var{from}, const void *@var{to}, size_t @var{count}) | |
611 | ||
612 | Copies @var{count} bytes from memory area @var{from} to memory area | |
613 | @var{to}, returning a pointer to @var{to}. | |
614 | ||
615 | @end deftypefn | |
616 | ||
10b57b38 DD |
617 | @c mempcpy.c:23 |
618 | @deftypefn Supplemental void* mempcpy (void *@var{out}, const void *@var{in}, size_t @var{length}) | |
619 | ||
620 | Copies @var{length} bytes from memory region @var{in} to region | |
621 | @var{out}. Returns a pointer to @var{out} + @var{length}. | |
622 | ||
623 | @end deftypefn | |
624 | ||
39423523 DD |
625 | @c memset.c:6 |
626 | @deftypefn Supplemental void* memset (void *@var{s}, int @var{c}, size_t @var{count}) | |
627 | ||
628 | Sets the first @var{count} bytes of @var{s} to the constant byte | |
629 | @var{c}, returning a pointer to @var{s}. | |
630 | ||
631 | @end deftypefn | |
632 | ||
ba19b94f | 633 | @c mkstemps.c:54 |
67f3cb05 | 634 | @deftypefn Replacement int mkstemps (char *@var{pattern}, int @var{suffix_len}) |
ba19b94f | 635 | |
67f3cb05 GK |
636 | Generate a unique temporary file name from @var{pattern}. |
637 | @var{pattern} has the form: | |
ba19b94f DD |
638 | |
639 | @example | |
5d852400 | 640 | @var{path}/ccXXXXXX@var{suffix} |
ba19b94f DD |
641 | @end example |
642 | ||
5d852400 | 643 | @var{suffix_len} tells us how long @var{suffix} is (it can be zero |
67f3cb05 | 644 | length). The last six characters of @var{pattern} before @var{suffix} |
5d852400 | 645 | must be @samp{XXXXXX}; they are replaced with a string that makes the |
ba19b94f DD |
646 | filename unique. Returns a file descriptor open on the file for |
647 | reading and writing. | |
648 | ||
649 | @end deftypefn | |
650 | ||
e9edcedc | 651 | @c pexecute.txh:169 |
b109e79a | 652 | @deftypefn Extension void pex_free (struct pex_obj @var{obj}) |
ba19b94f | 653 | |
b109e79a | 654 | Clean up and free all data associated with @var{obj}. |
ba19b94f | 655 | |
b109e79a | 656 | @end deftypefn |
ba19b94f | 657 | |
e9edcedc | 658 | @c pexecute.txh:144 |
b109e79a | 659 | @deftypefn Extension int pex_get_status (struct pex_obj *@var{obj}, int @var{count}, int *@var{vector}) |
ba19b94f | 660 | |
b109e79a ILT |
661 | Returns the exit status of all programs run using @var{obj}. |
662 | @var{count} is the number of results expected. The results will be | |
663 | placed into @var{vector}. The results are in the order of the calls | |
664 | to @code{pex_run}. Returns 0 on error, 1 on success. | |
ba19b94f | 665 | |
b109e79a | 666 | @end deftypefn |
ba19b94f | 667 | |
e9edcedc | 668 | @c pexecute.txh:153 |
b109e79a | 669 | @deftypefn Extension int pex_get_times (struct pex_obj *@var{obj}, int @var{count}, struct pex_time *@var{vector}) |
ba19b94f | 670 | |
b109e79a ILT |
671 | Returns the process execution times of all programs run using |
672 | @var{obj}. @var{count} is the number of results expected. The | |
673 | results will be placed into @var{vector}. The results are in the | |
674 | order of the calls to @code{pex_run}. Returns 0 on error, 1 on | |
675 | success. | |
ba19b94f | 676 | |
e9edcedc DD |
677 | @code{struct pex_time} has the following fields of the type |
678 | @code{unsigned long}: @code{user_seconds}, | |
b109e79a ILT |
679 | @code{user_microseconds}, @code{system_seconds}, |
680 | @code{system_microseconds}. On systems which do not support reporting | |
681 | process times, all the fields will be set to @code{0}. | |
ba19b94f DD |
682 | |
683 | @end deftypefn | |
684 | ||
e9edcedc DD |
685 | @c pexecute.txh:1 |
686 | @deftypefn Extension {struct pex_obj *} pex_init (int @var{flags}, const char *@var{pname}, const char *@var{tempbase}) | |
687 | ||
688 | Prepare to execute one or more programs, with standard output of each | |
689 | program fed to standard input of the next. This is a system | |
690 | independent interface to execute a pipeline. | |
691 | ||
692 | @var{flags} is a bitwise combination of the following: | |
693 | ||
694 | @table @code | |
695 | ||
696 | @vindex PEX_RECORD_TIMES | |
697 | @item PEX_RECORD_TIMES | |
698 | Record subprocess times if possible. | |
699 | ||
700 | @vindex PEX_USE_PIPES | |
701 | @item PEX_USE_PIPES | |
702 | Use pipes for communication between processes, if possible. | |
703 | ||
704 | @vindex PEX_SAVE_TEMPS | |
705 | @item PEX_SAVE_TEMPS | |
706 | Don't delete temporary files used for communication between | |
707 | processes. | |
708 | ||
709 | @end table | |
710 | ||
711 | @var{pname} is the name of program to be executed, used in error | |
712 | messages. @var{tempbase} is a base name to use for any required | |
713 | temporary files; it may be @code{NULL} to use a randomly chosen name. | |
714 | ||
715 | @end deftypefn | |
716 | ||
717 | @c pexecute.txh:175 | |
718 | @deftypefn Extension {const char *} pex_one (int @var{flags}, const char *@var{executable}, char * const *@var{argv}, const char *@var{pname}, const char *@var{outname}, const char *@var{errname}, int *@var{status}, int *@var{err}) | |
719 | ||
720 | An interface to permit the easy execution of a | |
721 | single program. The return value and most of the parameters are as | |
722 | for a call to @code{pex_run}. @var{flags} is restricted to a | |
723 | combination of @code{PEX_SEARCH}, @code{PEX_STDERR_TO_STDOUT}, and | |
724 | @code{PEX_BINARY_OUTPUT}. @var{outname} is interpreted as if | |
725 | @code{PEX_LAST} were set. On a successful return, @code{*@var{status}} will | |
726 | be set to the exit status of the program. | |
727 | ||
728 | @end deftypefn | |
729 | ||
730 | @c pexecute.txh:132 | |
731 | @deftypefn Extension {FILE *} pex_read_output (struct pex_obj *@var{obj}, int @var{binary}) | |
b109e79a ILT |
732 | |
733 | Returns a @code{FILE} pointer which may be used to read the standard | |
734 | output of the last program in the pipeline. When this is used, | |
735 | @code{PEX_LAST} should not be used in a call to @code{pex_run}. After | |
736 | this is called, @code{pex_run} may no longer be called with the same | |
737 | @var{obj}. @var{binary} should be non-zero if the file should be | |
738 | opened in binary mode. Don't call @code{fclose} on the returned file; | |
739 | it will be closed by @code{pex_free}. | |
740 | ||
741 | @end deftypefn | |
742 | ||
e9edcedc DD |
743 | @c pexecute.txh:32 |
744 | @deftypefn Extension {const char *} pex_run (struct pex_obj *@var{obj}, int @var{flags}, const char *@var{executable}, char * const *@var{argv}, const char *@var{outname}, const char *@var{errname}, int *@var{err}) | |
745 | ||
746 | Execute one program in a pipeline. On success this returns | |
747 | @code{NULL}. On failure it returns an error message, a statically | |
748 | allocated string. | |
749 | ||
750 | @var{obj} is returned by a previous call to @code{pex_init}. | |
751 | ||
752 | @var{flags} is a bitwise combination of the following: | |
753 | ||
754 | @table @code | |
755 | ||
756 | @vindex PEX_LAST | |
757 | @item PEX_LAST | |
758 | This must be set on the last program in the pipeline. In particular, | |
759 | it should be set when executing a single program. The standard output | |
760 | of the program will be sent to @var{outname}, or, if @var{outname} is | |
761 | @code{NULL}, to the standard output of the calling program. Do @emph{not} | |
762 | set this bit if you want to call @code{pex_read_output} | |
763 | (described below). After a call to @code{pex_run} with this bit set, | |
764 | @var{pex_run} may no longer be called with the same @var{obj}. | |
765 | ||
766 | @vindex PEX_SEARCH | |
767 | @item PEX_SEARCH | |
768 | Search for the program using the user's executable search path. | |
769 | ||
770 | @vindex PEX_SUFFIX | |
771 | @item PEX_SUFFIX | |
772 | @var{outname} is a suffix. See the description of @var{outname}, | |
773 | below. | |
774 | ||
775 | @vindex PEX_STDERR_TO_STDOUT | |
776 | @item PEX_STDERR_TO_STDOUT | |
777 | Send the program's standard error to standard output, if possible. | |
778 | ||
779 | @vindex PEX_BINARY_INPUT | |
780 | @vindex PEX_BINARY_OUTPUT | |
781 | @item PEX_BINARY_INPUT | |
782 | @itemx PEX_BINARY_OUTPUT | |
783 | The standard input (output) of the program should be read (written) in | |
784 | binary mode rather than text mode. These flags are ignored on systems | |
785 | which do not distinguish binary mode and text mode, such as Unix. For | |
786 | proper behavior these flags should match appropriately---a call to | |
787 | @code{pex_run} using @code{PEX_BINARY_OUTPUT} should be followed by a | |
788 | call using @code{PEX_BINARY_INPUT}. | |
789 | @end table | |
790 | ||
791 | @var{executable} is the program to execute. @var{argv} is the set of | |
792 | arguments to pass to the program; normally @code{@var{argv}[0]} will | |
793 | be a copy of @var{executable}. | |
794 | ||
795 | @var{outname} is used to set the name of the file to use for standard | |
796 | output. There are two cases in which no output file will be used: | |
797 | ||
798 | @enumerate | |
799 | @item | |
800 | if @code{PEX_LAST} is not set in @var{flags}, and @code{PEX_USE_PIPES} | |
801 | was set in the call to @code{pex_init}, and the system supports pipes | |
802 | ||
803 | @item | |
804 | if @code{PEX_LAST} is set in @var{flags}, and @var{outname} is | |
805 | @code{NULL} | |
806 | @end enumerate | |
807 | ||
808 | @noindent | |
809 | Otherwise the code will use a file to hold standard | |
810 | output. If @code{PEX_LAST} is not set, this file is considered to be | |
811 | a temporary file, and it will be removed when no longer needed, unless | |
812 | @code{PEX_SAVE_TEMPS} was set in the call to @code{pex_init}. | |
813 | ||
814 | There are two cases to consider when setting the name of the file to | |
815 | hold standard output. | |
816 | ||
817 | @enumerate | |
818 | @item | |
819 | @code{PEX_SUFFIX} is set in @var{flags}. In this case | |
820 | @var{outname} may not be @code{NULL}. If the @var{tempbase} parameter | |
821 | to @code{pex_init} was not @code{NULL}, then the output file name is | |
822 | the concatenation of @var{tempbase} and @var{outname}. If | |
823 | @var{tempbase} was @code{NULL}, then the output file name is a random | |
824 | file name ending in @var{outname}. | |
825 | ||
826 | @item | |
827 | @code{PEX_SUFFIX} was not set in @var{flags}. In this | |
828 | case, if @var{outname} is not @code{NULL}, it is used as the output | |
829 | file name. If @var{outname} is @code{NULL}, and @var{tempbase} was | |
830 | not NULL, the output file name is randomly chosen using | |
831 | @var{tempbase}. Otherwise the output file name is chosen completely | |
832 | at random. | |
833 | @end enumerate | |
834 | ||
835 | @var{errname} is the file name to use for standard error output. If | |
836 | it is @code{NULL}, standard error is the same as the caller's. | |
837 | Otherwise, standard error is written to the named file. | |
838 | ||
839 | On an error return, the code sets @code{*@var{err}} to an @code{errno} | |
840 | value, or to 0 if there is no relevant @code{errno}. | |
841 | ||
842 | @end deftypefn | |
843 | ||
844 | @c pexecute.txh:187 | |
b109e79a ILT |
845 | @deftypefn Extension int pexecute (const char *@var{program}, char * const *@var{argv}, const char *@var{this_pname}, const char *@var{temp_base}, char **@var{errmsg_fmt}, char **@var{errmsg_arg}, int flags) |
846 | ||
847 | This is the old interface to execute one or more programs. It is | |
848 | still supported for compatibility purposes, but is no longer | |
849 | documented. | |
850 | ||
851 | @end deftypefn | |
852 | ||
853 | @c strsignal.c:539 | |
ba19b94f DD |
854 | @deftypefn Supplemental void psignal (unsigned @var{signo}, char *@var{message}) |
855 | ||
856 | Print @var{message} to the standard error, followed by a colon, | |
857 | followed by the description of the signal specified by @var{signo}, | |
858 | followed by a newline. | |
859 | ||
860 | @end deftypefn | |
861 | ||
39423523 DD |
862 | @c putenv.c:21 |
863 | @deftypefn Supplemental int putenv (const char *@var{string}) | |
864 | ||
865 | Uses @code{setenv} or @code{unsetenv} to put @var{string} into | |
866 | the environment or remove it. If @var{string} is of the form | |
99b58139 | 867 | @samp{name=value} the string is added; if no @samp{=} is present the |
39423523 DD |
868 | name is unset/removed. |
869 | ||
870 | @end deftypefn | |
871 | ||
e9edcedc | 872 | @c pexecute.txh:195 |
ba19b94f DD |
873 | @deftypefn Extension int pwait (int @var{pid}, int *@var{status}, int @var{flags}) |
874 | ||
b109e79a | 875 | Another part of the old execution interface. |
ba19b94f DD |
876 | |
877 | @end deftypefn | |
878 | ||
879 | @c random.c:39 | |
5d852400 | 880 | @deftypefn Supplement {long int} random (void) |
ba19b94f DD |
881 | @deftypefnx Supplement void srandom (unsigned int @var{seed}) |
882 | @deftypefnx Supplement void* initstate (unsigned int @var{seed}, void *@var{arg_state}, unsigned long @var{n}) | |
883 | @deftypefnx Supplement void* setstate (void *@var{arg_state}) | |
884 | ||
885 | Random number functions. @code{random} returns a random number in the | |
5d852400 | 886 | range 0 to @code{LONG_MAX}. @code{srandom} initializes the random |
ba19b94f DD |
887 | number generator to some starting point determined by @var{seed} |
888 | (else, the values returned by @code{random} are always the same for each | |
5d852400 | 889 | run of the program). @code{initstate} and @code{setstate} allow fine-grained |
ba19b94f DD |
890 | control over the state of the random number generator. |
891 | ||
892 | @end deftypefn | |
893 | ||
67f3cb05 | 894 | @c concat.c:173 |
5d852400 | 895 | @deftypefn Extension char* reconcat (char *@var{optr}, const char *@var{s1}, @dots{}, @code{NULL}) |
ba19b94f DD |
896 | |
897 | Same as @code{concat}, except that if @var{optr} is not @code{NULL} it | |
898 | is freed after the string is created. This is intended to be useful | |
899 | when you're extending an existing string or building up a string in a | |
900 | loop: | |
901 | ||
902 | @example | |
903 | str = reconcat (str, "pre-", str, NULL); | |
904 | @end example | |
905 | ||
906 | @end deftypefn | |
907 | ||
39423523 DD |
908 | @c rename.c:6 |
909 | @deftypefn Supplemental int rename (const char *@var{old}, const char *@var{new}) | |
910 | ||
911 | Renames a file from @var{old} to @var{new}. If @var{new} already | |
912 | exists, it is removed. | |
913 | ||
914 | @end deftypefn | |
915 | ||
916 | @c rindex.c:5 | |
917 | @deftypefn Supplemental char* rindex (const char *@var{s}, int @var{c}) | |
918 | ||
fa9f0e33 | 919 | Returns a pointer to the last occurrence of the character @var{c} in |
99b58139 | 920 | the string @var{s}, or @code{NULL} if not found. The use of @code{rindex} is |
39423523 DD |
921 | deprecated in new programs in favor of @code{strrchr}. |
922 | ||
923 | @end deftypefn | |
924 | ||
925 | @c setenv.c:22 | |
926 | @deftypefn Supplemental int setenv (const char *@var{name}, const char *@var{value}, int @var{overwrite}) | |
927 | @deftypefnx Supplemental void unsetenv (const char *@var{name}) | |
928 | ||
929 | @code{setenv} adds @var{name} to the environment with value | |
930 | @var{value}. If the name was already present in the environment, | |
56056af5 | 931 | the new value will be stored only if @var{overwrite} is nonzero. |
39423523 DD |
932 | The companion @code{unsetenv} function removes @var{name} from the |
933 | environment. This implementation is not safe for multithreaded code. | |
934 | ||
935 | @end deftypefn | |
936 | ||
b109e79a | 937 | @c strsignal.c:348 |
5d852400 | 938 | @deftypefn Extension int signo_max (void) |
ba19b94f DD |
939 | |
940 | Returns the maximum signal value for which a corresponding symbolic | |
941 | name or message is available. Note that in the case where we use the | |
942 | @code{sys_siglist} supplied by the system, it is possible for there to | |
943 | be more symbolic names than messages, or vice versa. In fact, the | |
944 | manual page for @code{psignal(3b)} explicitly warns that one should | |
945 | check the size of the table (@code{NSIG}) before indexing it, since | |
946 | new signal codes may be added to the system before they are added to | |
947 | the table. Thus @code{NSIG} might be smaller than value implied by | |
948 | the largest signo value defined in @code{<signal.h>}. | |
949 | ||
950 | We return the maximum value that can be used to obtain a meaningful | |
951 | symbolic name or message. | |
952 | ||
953 | @end deftypefn | |
954 | ||
39423523 DD |
955 | @c sigsetmask.c:8 |
956 | @deftypefn Supplemental int sigsetmask (int @var{set}) | |
957 | ||
958 | Sets the signal mask to the one provided in @var{set} and returns | |
959 | the old mask (which, for libiberty's implementation, will always | |
960 | be the value @code{1}). | |
961 | ||
962 | @end deftypefn | |
963 | ||
2ed1e5cc DD |
964 | @c snprintf.c:28 |
965 | @deftypefn Supplemental int snprintf (char *@var{buf}, size_t @var{n}, const char *@var{format}, ...) | |
966 | ||
967 | This function is similar to sprintf, but it will print at most @var{n} | |
968 | characters. On error the return value is -1, otherwise it returns the | |
969 | number of characters that would have been printed had @var{n} been | |
970 | sufficiently large, regardless of the actual value of @var{n}. Note | |
971 | some pre-C99 system libraries do not implement this correctly so users | |
972 | cannot generally rely on the return value if the system version of | |
973 | this function is used. | |
974 | ||
975 | @end deftypefn | |
976 | ||
ba19b94f DD |
977 | @c spaces.c:22 |
978 | @deftypefn Extension char* spaces (int @var{count}) | |
979 | ||
980 | Returns a pointer to a memory region filled with the specified | |
981 | number of spaces and null terminated. The returned pointer is | |
982 | valid until at least the next call. | |
983 | ||
984 | @end deftypefn | |
985 | ||
10b57b38 DD |
986 | @c stpcpy.c:23 |
987 | @deftypefn Supplemental char* stpcpy (char *@var{dst}, const char *@var{src}) | |
988 | ||
989 | Copies the string @var{src} into @var{dst}. Returns a pointer to | |
990 | @var{dst} + strlen(@var{src}). | |
991 | ||
992 | @end deftypefn | |
993 | ||
994 | @c stpncpy.c:23 | |
995 | @deftypefn Supplemental char* stpncpy (char *@var{dst}, const char *@var{src}, size_t @var{len}) | |
996 | ||
997 | Copies the string @var{src} into @var{dst}, copying exactly @var{len} | |
998 | and padding with zeros if necessary. If @var{len} < strlen(@var{src}) | |
999 | then return @var{dst} + @var{len}, otherwise returns @var{dst} + | |
1000 | strlen(@var{src}). | |
1001 | ||
1002 | @end deftypefn | |
1003 | ||
39423523 DD |
1004 | @c strcasecmp.c:15 |
1005 | @deftypefn Supplemental int strcasecmp (const char *@var{s1}, const char *@var{s2}) | |
1006 | ||
1007 | A case-insensitive @code{strcmp}. | |
1008 | ||
1009 | @end deftypefn | |
1010 | ||
1011 | @c strchr.c:6 | |
1012 | @deftypefn Supplemental char* strchr (const char *@var{s}, int @var{c}) | |
1013 | ||
fa9f0e33 | 1014 | Returns a pointer to the first occurrence of the character @var{c} in |
99b58139 | 1015 | the string @var{s}, or @code{NULL} if not found. If @var{c} is itself the |
39423523 DD |
1016 | null character, the results are undefined. |
1017 | ||
1018 | @end deftypefn | |
1019 | ||
1020 | @c strdup.c:3 | |
1021 | @deftypefn Supplemental char* strdup (const char *@var{s}) | |
1022 | ||
1023 | Returns a pointer to a copy of @var{s} in memory obtained from | |
99b58139 | 1024 | @code{malloc}, or @code{NULL} if insufficient memory was available. |
39423523 DD |
1025 | |
1026 | @end deftypefn | |
1027 | ||
b109e79a | 1028 | @c strerror.c:670 |
ba19b94f | 1029 | @deftypefn Replacement {const char*} strerrno (int @var{errnum}) |
39423523 DD |
1030 | |
1031 | Given an error number returned from a system call (typically returned | |
1032 | in @code{errno}), returns a pointer to a string containing the | |
99b58139 | 1033 | symbolic name of that error number, as found in @code{<errno.h>}. |
39423523 DD |
1034 | |
1035 | If the supplied error number is within the valid range of indices for | |
1036 | symbolic names, but no name is available for the particular error | |
ba19b94f | 1037 | number, then returns the string @samp{Error @var{num}}, where @var{num} |
fa9f0e33 | 1038 | is the error number. |
39423523 DD |
1039 | |
1040 | If the supplied error number is not within the range of valid | |
99b58139 | 1041 | indices, then returns @code{NULL}. |
39423523 DD |
1042 | |
1043 | The contents of the location pointed to are only guaranteed to be | |
fa9f0e33 | 1044 | valid until the next call to @code{strerrno}. |
39423523 DD |
1045 | |
1046 | @end deftypefn | |
1047 | ||
b5c3b3de | 1048 | @c strerror.c:603 |
ba19b94f | 1049 | @deftypefn Supplemental char* strerror (int @var{errnoval}) |
39423523 DD |
1050 | |
1051 | Maps an @code{errno} number to an error message string, the contents | |
1052 | of which are implementation defined. On systems which have the | |
1053 | external variables @code{sys_nerr} and @code{sys_errlist}, these | |
1054 | strings will be the same as the ones used by @code{perror}. | |
1055 | ||
1056 | If the supplied error number is within the valid range of indices for | |
1057 | the @code{sys_errlist}, but no message is available for the particular | |
ba19b94f | 1058 | error number, then returns the string @samp{Error @var{num}}, where |
fa9f0e33 | 1059 | @var{num} is the error number. |
39423523 DD |
1060 | |
1061 | If the supplied error number is not a valid index into | |
99b58139 | 1062 | @code{sys_errlist}, returns @code{NULL}. |
39423523 DD |
1063 | |
1064 | The returned string is only guaranteed to be valid only until the | |
1065 | next call to @code{strerror}. | |
1066 | ||
1067 | @end deftypefn | |
1068 | ||
1069 | @c strncasecmp.c:15 | |
1070 | @deftypefn Supplemental int strncasecmp (const char *@var{s1}, const char *@var{s2}) | |
1071 | ||
1072 | A case-insensitive @code{strncmp}. | |
1073 | ||
1074 | @end deftypefn | |
1075 | ||
1076 | @c strncmp.c:6 | |
1077 | @deftypefn Supplemental int strncmp (const char *@var{s1}, const char *@var{s2}, size_t @var{n}) | |
1078 | ||
1079 | Compares the first @var{n} bytes of two strings, returning a value as | |
1080 | @code{strcmp}. | |
1081 | ||
1082 | @end deftypefn | |
1083 | ||
0fad4bdb DD |
1084 | @c strndup.c:23 |
1085 | @deftypefn Extension char* strndup (const char *@var{s}, size_t @var{n}) | |
1086 | ||
1087 | Returns a pointer to a copy of @var{s} with at most @var{n} characters | |
1088 | in memory obtained from @code{malloc}, or @code{NULL} if insufficient | |
1089 | memory was available. The result is always NUL terminated. | |
1090 | ||
1091 | @end deftypefn | |
1092 | ||
39423523 DD |
1093 | @c strrchr.c:6 |
1094 | @deftypefn Supplemental char* strrchr (const char *@var{s}, int @var{c}) | |
1095 | ||
fa9f0e33 | 1096 | Returns a pointer to the last occurrence of the character @var{c} in |
99b58139 | 1097 | the string @var{s}, or @code{NULL} if not found. If @var{c} is itself the |
39423523 DD |
1098 | null character, the results are undefined. |
1099 | ||
1100 | @end deftypefn | |
1101 | ||
b109e79a | 1102 | @c strsignal.c:383 |
ba19b94f DD |
1103 | @deftypefn Supplemental {const char *} strsignal (int @var{signo}) |
1104 | ||
1105 | Maps an signal number to an signal message string, the contents of | |
1106 | which are implementation defined. On systems which have the external | |
1107 | variable @code{sys_siglist}, these strings will be the same as the | |
1108 | ones used by @code{psignal()}. | |
1109 | ||
1110 | If the supplied signal number is within the valid range of indices for | |
1111 | the @code{sys_siglist}, but no message is available for the particular | |
1112 | signal number, then returns the string @samp{Signal @var{num}}, where | |
1113 | @var{num} is the signal number. | |
1114 | ||
1115 | If the supplied signal number is not a valid index into | |
1116 | @code{sys_siglist}, returns @code{NULL}. | |
1117 | ||
1118 | The returned string is only guaranteed to be valid only until the next | |
1119 | call to @code{strsignal}. | |
1120 | ||
1121 | @end deftypefn | |
1122 | ||
b109e79a | 1123 | @c strsignal.c:446 |
ba19b94f DD |
1124 | @deftypefn Extension {const char*} strsigno (int @var{signo}) |
1125 | ||
1126 | Given an signal number, returns a pointer to a string containing the | |
1127 | symbolic name of that signal number, as found in @code{<signal.h>}. | |
1128 | ||
1129 | If the supplied signal number is within the valid range of indices for | |
1130 | symbolic names, but no name is available for the particular signal | |
1131 | number, then returns the string @samp{Signal @var{num}}, where | |
1132 | @var{num} is the signal number. | |
1133 | ||
1134 | If the supplied signal number is not within the range of valid | |
1135 | indices, then returns @code{NULL}. | |
1136 | ||
1137 | The contents of the location pointed to are only guaranteed to be | |
1138 | valid until the next call to @code{strsigno}. | |
1139 | ||
1140 | @end deftypefn | |
1141 | ||
39423523 DD |
1142 | @c strstr.c:6 |
1143 | @deftypefn Supplemental char* strstr (const char *@var{string}, const char *@var{sub}) | |
1144 | ||
1145 | This function searches for the substring @var{sub} in the string | |
fa9f0e33 | 1146 | @var{string}, not including the terminating null characters. A pointer |
99b58139 | 1147 | to the first occurrence of @var{sub} is returned, or @code{NULL} if the |
39423523 DD |
1148 | substring is absent. If @var{sub} points to a string with zero |
1149 | length, the function returns @var{string}. | |
1150 | ||
1151 | @end deftypefn | |
1152 | ||
1153 | @c strtod.c:27 | |
1154 | @deftypefn Supplemental double strtod (const char *@var{string}, char **@var{endptr}) | |
1155 | ||
56056af5 | 1156 | This ISO C function converts the initial portion of @var{string} to a |
99b58139 | 1157 | @code{double}. If @var{endptr} is not @code{NULL}, a pointer to the |
39423523 DD |
1158 | character after the last character used in the conversion is stored in |
1159 | the location referenced by @var{endptr}. If no conversion is | |
1160 | performed, zero is returned and the value of @var{string} is stored in | |
1161 | the location referenced by @var{endptr}. | |
1162 | ||
1163 | @end deftypefn | |
1164 | ||
b109e79a | 1165 | @c strerror.c:729 |
ba19b94f | 1166 | @deftypefn Extension int strtoerrno (const char *@var{name}) |
39423523 | 1167 | |
99b58139 | 1168 | Given the symbolic name of a error number (e.g., @code{EACCES}), map it |
39423523 DD |
1169 | to an errno value. If no translation is found, returns 0. |
1170 | ||
1171 | @end deftypefn | |
1172 | ||
1173 | @c strtol.c:33 | |
1174 | @deftypefn Supplemental {long int} strtol (const char *@var{string}, char **@var{endptr}, int @var{base}) | |
ba19b94f | 1175 | @deftypefnx Supplemental {unsigned long int} strtoul (const char *@var{string}, char **@var{endptr}, int @var{base}) |
39423523 DD |
1176 | |
1177 | The @code{strtol} function converts the string in @var{string} to a | |
1178 | long integer value according to the given @var{base}, which must be | |
1179 | between 2 and 36 inclusive, or be the special value 0. If @var{base} | |
1180 | is 0, @code{strtol} will look for the prefixes @code{0} and @code{0x} | |
1181 | to indicate bases 8 and 16, respectively, else default to base 10. | |
1182 | When the base is 16 (either explicitly or implicitly), a prefix of | |
fa9f0e33 | 1183 | @code{0x} is allowed. The handling of @var{endptr} is as that of |
ba19b94f DD |
1184 | @code{strtod} above. The @code{strtoul} function is the same, except |
1185 | that the converted value is unsigned. | |
1186 | ||
1187 | @end deftypefn | |
1188 | ||
b109e79a | 1189 | @c strsignal.c:500 |
ba19b94f DD |
1190 | @deftypefn Extension int strtosigno (const char *@var{name}) |
1191 | ||
1192 | Given the symbolic name of a signal, map it to a signal number. If no | |
1193 | translation is found, returns 0. | |
39423523 DD |
1194 | |
1195 | @end deftypefn | |
1196 | ||
67f3cb05 GK |
1197 | @c strverscmp.c:24 |
1198 | @deftypefun int strverscmp (const char *@var{s1}, const char *@var{s2}) | |
1199 | The @code{strverscmp} function compares the string @var{s1} against | |
1200 | @var{s2}, considering them as holding indices/version numbers. Return | |
1201 | value follows the same conventions as found in the @code{strverscmp} | |
1202 | function. In fact, if @var{s1} and @var{s2} contain no digits, | |
1203 | @code{strverscmp} behaves like @code{strcmp}. | |
1204 | ||
1205 | Basically, we compare strings normally (character by character), until | |
1206 | we find a digit in each string - then we enter a special comparison | |
1207 | mode, where each sequence of digits is taken as a whole. If we reach the | |
1208 | end of these two parts without noticing a difference, we return to the | |
1209 | standard comparison mode. There are two types of numeric parts: | |
1210 | "integral" and "fractional" (those begin with a '0'). The types | |
1211 | of the numeric parts affect the way we sort them: | |
1212 | ||
1213 | @itemize @bullet | |
1214 | @item | |
1215 | integral/integral: we compare values as you would expect. | |
1216 | ||
1217 | @item | |
1218 | fractional/integral: the fractional part is less than the integral one. | |
1219 | Again, no surprise. | |
1220 | ||
1221 | @item | |
1222 | fractional/fractional: the things become a bit more complex. | |
1223 | If the common prefix contains only leading zeroes, the longest part is less | |
1224 | than the other one; else the comparison behaves normally. | |
1225 | @end itemize | |
1226 | ||
1227 | @smallexample | |
1228 | strverscmp ("no digit", "no digit") | |
1229 | @result{} 0 // @r{same behavior as strcmp.} | |
1230 | strverscmp ("item#99", "item#100") | |
1231 | @result{} <0 // @r{same prefix, but 99 < 100.} | |
1232 | strverscmp ("alpha1", "alpha001") | |
1233 | @result{} >0 // @r{fractional part inferior to integral one.} | |
1234 | strverscmp ("part1_f012", "part1_f01") | |
1235 | @result{} >0 // @r{two fractional parts.} | |
1236 | strverscmp ("foo.009", "foo.0") | |
1237 | @result{} <0 // @r{idem, but with leading zeroes only.} | |
1238 | @end smallexample | |
1239 | ||
1240 | This function is especially useful when dealing with filename sorting, | |
1241 | because filenames frequently hold indices/version numbers. | |
1242 | @end deftypefun | |
1243 | ||
39423523 DD |
1244 | @c tmpnam.c:3 |
1245 | @deftypefn Supplemental char* tmpnam (char *@var{s}) | |
1246 | ||
1247 | This function attempts to create a name for a temporary file, which | |
1248 | will be a valid file name yet not exist when @code{tmpnam} checks for | |
1249 | it. @var{s} must point to a buffer of at least @code{L_tmpnam} bytes, | |
99b58139 | 1250 | or be @code{NULL}. Use of this function creates a security risk, and it must |
39423523 DD |
1251 | not be used in new projects. Use @code{mkstemp} instead. |
1252 | ||
1253 | @end deftypefn | |
1254 | ||
0fad4bdb DD |
1255 | @c unlink-if-ordinary.c:27 |
1256 | @deftypefn Supplemental int unlink_if_ordinary (const char*) | |
1257 | ||
1258 | Unlinks the named file, unless it is special (e.g. a device file). | |
1259 | Returns 0 when the file was unlinked, a negative value (and errno set) when | |
1260 | there was an error deleting the file, and a positive value if no attempt | |
1261 | was made to unlink the file because it is special. | |
1262 | ||
1263 | @end deftypefn | |
1264 | ||
c631edf1 DD |
1265 | @c fopen_unlocked.c:31 |
1266 | @deftypefn Extension void unlock_std_streams (void) | |
1267 | ||
1268 | If the OS supports it, ensure that the standard I/O streams, | |
1269 | @code{stdin}, @code{stdout} and @code{stderr} are setup to avoid any | |
1270 | multi-threaded locking. Otherwise do nothing. | |
1271 | ||
1272 | @end deftypefn | |
1273 | ||
7b6f6286 DD |
1274 | @c fopen_unlocked.c:23 |
1275 | @deftypefn Extension void unlock_stream (FILE * @var{stream}) | |
1276 | ||
1277 | If the OS supports it, ensure that the supplied stream is setup to | |
1278 | avoid any multi-threaded locking. Otherwise leave the @code{FILE} | |
1279 | pointer unchanged. If the @var{stream} is @code{NULL} do nothing. | |
1280 | ||
1281 | @end deftypefn | |
1282 | ||
b109e79a | 1283 | @c vasprintf.c:47 |
5d852400 | 1284 | @deftypefn Extension int vasprintf (char **@var{resptr}, const char *@var{format}, va_list @var{args}) |
ba19b94f DD |
1285 | |
1286 | Like @code{vsprintf}, but instead of passing a pointer to a buffer, | |
1287 | you pass a pointer to a pointer. This function will compute the size | |
1288 | of the buffer needed, allocate memory with @code{malloc}, and store a | |
1289 | pointer to the allocated memory in @code{*@var{resptr}}. The value | |
1290 | returned is the same as @code{vsprintf} would return. If memory could | |
5a4e47bd | 1291 | not be allocated, minus one is returned and @code{NULL} is stored in |
ba19b94f DD |
1292 | @code{*@var{resptr}}. |
1293 | ||
1294 | @end deftypefn | |
1295 | ||
39423523 | 1296 | @c vfork.c:6 |
99b58139 | 1297 | @deftypefn Supplemental int vfork (void) |
39423523 DD |
1298 | |
1299 | Emulates @code{vfork} by calling @code{fork} and returning its value. | |
1300 | ||
1301 | @end deftypefn | |
1302 | ||
1303 | @c vprintf.c:3 | |
1304 | @deftypefn Supplemental int vprintf (const char *@var{format}, va_list @var{ap}) | |
1305 | @deftypefnx Supplemental int vfprintf (FILE *@var{stream}, const char *@var{format}, va_list @var{ap}) | |
1306 | @deftypefnx Supplemental int vsprintf (char *@var{str}, const char *@var{format}, va_list @var{ap}) | |
1307 | ||
1308 | These functions are the same as @code{printf}, @code{fprintf}, and | |
1309 | @code{sprintf}, respectively, except that they are called with a | |
1310 | @code{va_list} instead of a variable number of arguments. Note that | |
1311 | they do not call @code{va_end}; this is the application's | |
1312 | responsibility. In @libib{} they are implemented in terms of the | |
1313 | nonstandard but common function @code{_doprnt}. | |
1314 | ||
1315 | @end deftypefn | |
1316 | ||
2ed1e5cc DD |
1317 | @c vsnprintf.c:28 |
1318 | @deftypefn Supplemental int vsnprintf (char *@var{buf}, size_t @var{n}, const char *@var{format}, va_list @var{ap}) | |
1319 | ||
1320 | This function is similar to vsprintf, but it will print at most | |
1321 | @var{n} characters. On error the return value is -1, otherwise it | |
1322 | returns the number of characters that would have been printed had | |
1323 | @var{n} been sufficiently large, regardless of the actual value of | |
1324 | @var{n}. Note some pre-C99 system libraries do not implement this | |
1325 | correctly so users cannot generally rely on the return value if the | |
1326 | system version of this function is used. | |
1327 | ||
1328 | @end deftypefn | |
1329 | ||
39423523 DD |
1330 | @c waitpid.c:3 |
1331 | @deftypefn Supplemental int waitpid (int @var{pid}, int *@var{status}, int) | |
1332 | ||
1333 | This is a wrapper around the @code{wait} function. Any ``special'' | |
1334 | values of @var{pid} depend on your implementation of @code{wait}, as | |
1335 | does the return value. The third argument is unused in @libib{}. | |
1336 | ||
1337 | @end deftypefn | |
1338 | ||
1339 | @c xatexit.c:11 | |
1340 | @deftypefun int xatexit (void (*@var{fn}) (void)) | |
1341 | ||
1342 | Behaves as the standard @code{atexit} function, but with no limit on | |
99b58139 | 1343 | the number of registered functions. Returns 0 on success, or @minus{}1 on |
39423523 DD |
1344 | failure. If you use @code{xatexit} to register functions, you must use |
1345 | @code{xexit} to terminate your program. | |
1346 | ||
1347 | @end deftypefun | |
1348 | ||
fa9f0e33 | 1349 | @c xmalloc.c:38 |
99b58139 | 1350 | @deftypefn Replacement void* xcalloc (size_t @var{nelem}, size_t @var{elsize}) |
39423523 DD |
1351 | |
1352 | Allocate memory without fail, and set it to zero. This routine functions | |
1353 | like @code{calloc}, but will behave the same as @code{xmalloc} if memory | |
1354 | cannot be found. | |
1355 | ||
1356 | @end deftypefn | |
1357 | ||
1358 | @c xexit.c:22 | |
1359 | @deftypefn Replacement void xexit (int @var{code}) | |
1360 | ||
1361 | Terminates the program. If any functions have been registered with | |
fa9f0e33 | 1362 | the @code{xatexit} replacement function, they will be called first. |
39423523 DD |
1363 | Termination is handled via the system's normal @code{exit} call. |
1364 | ||
1365 | @end deftypefn | |
1366 | ||
1367 | @c xmalloc.c:22 | |
1368 | @deftypefn Replacement void* xmalloc (size_t) | |
1369 | ||
1370 | Allocate memory without fail. If @code{malloc} fails, this will print | |
fa9f0e33 DD |
1371 | a message to @code{stderr} (using the name set by |
1372 | @code{xmalloc_set_program_name}, | |
39423523 DD |
1373 | if any) and then call @code{xexit}. Note that it is therefore safe for |
1374 | a program to contain @code{#define malloc xmalloc} in its source. | |
1375 | ||
1376 | @end deftypefn | |
1377 | ||
fa9f0e33 | 1378 | @c xmalloc.c:53 |
39423523 DD |
1379 | @deftypefn Replacement void xmalloc_failed (size_t) |
1380 | ||
1381 | This function is not meant to be called by client code, and is listed | |
1382 | here for completeness only. If any of the allocation routines fail, this | |
1383 | function will be called to print an error message and terminate execution. | |
1384 | ||
1385 | @end deftypefn | |
1386 | ||
fa9f0e33 | 1387 | @c xmalloc.c:46 |
39423523 DD |
1388 | @deftypefn Replacement void xmalloc_set_program_name (const char *@var{name}) |
1389 | ||
1390 | You can use this to set the name of the program used by | |
1391 | @code{xmalloc_failed} when printing a failure message. | |
1392 | ||
1393 | @end deftypefn | |
1394 | ||
1395 | @c xmemdup.c:7 | |
1396 | @deftypefn Replacement void* xmemdup (void *@var{input}, size_t @var{copy_size}, size_t @var{alloc_size}) | |
1397 | ||
1398 | Duplicates a region of memory without fail. First, @var{alloc_size} bytes | |
1399 | are allocated, then @var{copy_size} bytes from @var{input} are copied into | |
1400 | it, and the new memory is returned. If fewer bytes are copied than were | |
1401 | allocated, the remaining memory is zeroed. | |
1402 | ||
1403 | @end deftypefn | |
1404 | ||
fa9f0e33 | 1405 | @c xmalloc.c:32 |
99b58139 | 1406 | @deftypefn Replacement void* xrealloc (void *@var{ptr}, size_t @var{size}) |
39423523 DD |
1407 | Reallocate memory without fail. This routine functions like @code{realloc}, |
1408 | but will behave the same as @code{xmalloc} if memory cannot be found. | |
1409 | ||
1410 | @end deftypefn | |
1411 | ||
1412 | @c xstrdup.c:7 | |
1413 | @deftypefn Replacement char* xstrdup (const char *@var{s}) | |
1414 | ||
1415 | Duplicates a character string without fail, using @code{xmalloc} to | |
1416 | obtain memory. | |
1417 | ||
1418 | @end deftypefn | |
1419 | ||
1420 | @c xstrerror.c:7 | |
1421 | @deftypefn Replacement char* xstrerror (int @var{errnum}) | |
1422 | ||
1423 | Behaves exactly like the standard @code{strerror} function, but | |
99b58139 | 1424 | will never return a @code{NULL} pointer. |
39423523 DD |
1425 | |
1426 | @end deftypefn | |
1427 | ||
0fad4bdb DD |
1428 | @c xstrndup.c:23 |
1429 | @deftypefn Replacement char* xstrndup (const char *@var{s}, size_t @var{n}) | |
1430 | ||
1431 | Returns a pointer to a copy of @var{s} with at most @var{n} characters | |
1432 | without fail, using @code{xmalloc} to obtain memory. The result is | |
1433 | always NUL terminated. | |
1434 | ||
1435 | @end deftypefn | |
1436 | ||
39423523 | 1437 |