* m10300-dis.c: Do not emit a comma before a PLUS (autoincrement)

[deliverable/binutils-gdb.git] / opcodes / ChangeLog

start-sanitize-am33
Fri Jul 24 15:22:40 1998  Jeffrey A Law  (law@cygnus.com)

	* m10300-dis.c: Do not emit a comma before a PLUS (autoincrement)
	operand.

end-sanitize-am33
Fri Jul 24 11:41:37 1998  Doug Evans  <devans@canuck.cygnus.com>

	* m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).

start-sanitize-am33
Thu Jul 23 09:21:03 1998  Jeffrey A Law  (law@cygnus.com)

	* m10300-opc.c: Add DSP autoincrement memory loads/stores.

	* m10300-opc.c: Add autoincrement memory loads/stores.

end-sanitize-am33
start-sanitize-r5900
Wed Jul 22 17:05:40 1998  Jeffrey A Law  (law@cygnus.com)

	* mips-opc.c: Make phmadh and phmsbh synonyms for phmaddh and
	phmsubh respectively.

end-sanitize-r5900
Tue Jul 21 13:41:07 1998  Doug Evans  <devans@seba.cygnus.com>

start-sanitize-cygnus
	* cgen-opc.in (@arch@_cgen_lookup_insn): Update call to
	CGEN_EXTRACT_FN.
	(@arch@_cgen_get_insn_operands): @arch@_cgen_get_operand renamed to
	@arch_cgen_get_int_operand.
	* cgen-asm.in (insert_insn_normal): New arg `pc', callers updated.
	Update call to @arch@_cgen_insert_operand.
	(@arch@_cgen_assemble_insn): Update call to CGEN_INSERT_FN.
	* cgen-dis.in (print_normal): Delete use of CGEN_PCREL_OFFSET.
	(extract_insn_normal): New arg `pc', callers updated.
	Update call to @arch@_cgen_extract_operand.
	(print_insn): Update call to CGEN_EXTRACT_FN.
end-sanitize-cygnus
	* m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.

start-sanitize-am33
Mon Jul 20 12:10:37 1998  Jeffrey A Law  (law@cygnus.com)

	* m10300-opc.c: Fix load to sp and store from sp for the am33.
	Add more multimedia instructions.

Thu Jul 16 18:04:46 1998  Jeffrey A Law  (law@cygnus.com)

	* m10300-opc.c (mn10300_opcodes): Fix opcode for 4 operand "mul" and
	"mulu".

end-sanitize-am33
start-sanitize-r5900
Mon Jul 13 18:14:24 1998  Jeffrey A Law  (law@cygnus.com)

	* mips-opc.c (pref): Enabled for the r5900.

end-sanitize-r5900
Mon Jul 13 14:53:59 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>

	* i386-dis.c (ckprefix): Handle fwait specially only when it isn't
	the first prefix.
	(dofloat): Correct test for fnstsw.  Print `fnstsw %ax' rather
	than `fnstsw %eax'.
	(OP_J): Remove unnecessary subtraction when 16-bit displacement
	will be masked later.

start-sanitize-am33
Fri Jul 10 23:09:56 1998  Jeffrey A Law  (law@cygnus.com)

	* m10300-opc.c (mn10300_opcodes): Fix destination operand for 3 operand
	instructions.

Wed Jul  8 11:32:44 1998  Jeffrey A Law  (law@cygnus.com)

	* m10300-dis.c (disassemble): When printing RREGs and XRREGs, map
	from raw register #s to symbolic names to make debugging easier.

end-sanitize-am33
Thu Jul  2 17:11:27 1998  Doug Evans  <devans@seba.cygnus.com>

	* m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.

Wed Jul  1 16:11:16 1998  Doug Evans  <devans@seba.cygnus.com>

	* m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
start-sanitize-cygnus
	* Makefile.am (CGENDIR): Set via configure.
	(CGEN): New variable.
	(CGENFILES): object.scm renamed to cos.scm.
	(run-cgen): Renamed from cgen.  stamp file renamed to stamp-$prefix.
	(stamp-m32r): Pass prefix to run-cgen.
	* Makefile.in: Regenerate.
	* cgen-asm.in: @arch@-opc.h renamed to @prefix@-opc.h.
	* cgen-dis.in: Ditto.
	* cgen-opc.in: Ditto.
	* cgen.sh: New args cgen,prefix.  Delete args scheme,schemeflags.
	* configure.in: AC_SUBST cgen,cgendir.  No longer look for guile.
	* configure: Regenerate.
end-sanitize-cygnus

start-sanitize-am33
Tue Jun 30 09:59:37 1998  Jeffrey A Law  (law@cygnus.com)

	* m10300-opc.c: Reorder "movbu" and "movhu" instructions too.

Mon Jun 29 14:54:32 1998  Jeffrey A Law  (law@cygnus.com)

	* m10300-opc.c: Reorder more instructions so that we do not
	accidentally match a mn10300 instruction when we really
	wanted an am33 instruction.

end-sanitize-am33
Fri Jun 26 11:08:55 1998  Jeffrey A Law  (law@cygnus.com)

	* m10300-dis.c: Only recognize instructions from the currently
	selected machine.
	* m10300-opc.c: Add field indicating the particular variant of
	the mn10300 each instruction is available on.

Fri Jun 26 12:04:21 1998  Ian Lance Taylor  <ian@cygnus.com>

	* configure.in: For bfd_vax_arch, build vax-dis.lo.
	* Makefile.am: Rebuild dependencies.
 	(CFILES): Add vax-dis.c.
	(ALL_MACHINES): Add vax-dis.lo.
	* aclocal.m4: Rebuild with current libtool.
	* configure, Makefile.in: Rebuild.

Fri Jun 26 12:03:20 1998  Klaus Kaempf  <kkaempf@progis.de>

	* vax-dis.c: New file, from work by Pauline Middelink
	<middelin@polyware.iaf.nl>.
	* disassemble.c (ARCH_vax): Define if ARCH_all.
	(disassembler): Add case for ARCH_vax.
	* makefile.vms: Support compilation on vms/vax.

start-sanitize-sky
Wed Jun 24 17:14:01 1998  Ian Carmichael  <iancarm@cygnus.com>

	* dvp-opc.c (DVP_OPERAND_RELOC_11_S4): Temporarily back out 
	the DVP_OPERAND_RELOC_11_S4 relocation.

end-sanitize-sky
start-sanitize-am33
Wed Jun 24 09:53:06 1998  Jeffrey A Law  (law@cygnus.com)

	* m10300-dis.c (print_insn_mn10300): 0xf7 opcode prefix specifies
	4 byte instructions.
	(disassemble): Correctly handle FMT_D10 instructions.

	* m10300-opc.c (mn10300_opcodes): Fix typo in IMM24 versions of the
	am33 shift instructions.

	* m10300-dis.c (print_insn_mn10300): 0xf9 opcode prefix specifies
	3 byte instructions.
	(disassemble): Handle new instruction formats FMT_D6, FMT_D7, FMT_D8
	FMT_D9 and FMT_D10.  Handle various new opcode flags for the am33.

	* m10300-opc.c (IMM32_HIGH8_MEM): New operand type.
	(mn10300_opcodes): Reorder so as to try and select opcodes from
	the core chip when multiple alternatives exist.  Change several
	am33 instructions to use IMM32_HIGH8_MEM.  Fix typos in "mac" and
	"macbu" instructions.  Fix typos in a couple DSP instructions too.

end-sanitize-am33
Tue Jun 23 19:42:18 1998  Mark Alexander  <marka@cygnus.com>

	* m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
	related to sign extension and the size of ints.

Tue Jun 23 10:59:26 1998  Jeffrey A Law  (law@cygnus.com)

	* m10300-opc.c: Support one operand "asr", "lsr" and "asl"
	instructions.  Support (sp) addressing mode by expanding it into
	(0,sp).

start-sanitize-sky
Mon Jun 22 15:48:29 1998  Ian Carmichael  <iancarm@cygnus.com>

	* dvp-opc.c (LIMM11, LUIMM15): New symbol types 
	DVP_OPERAND_RELOC_U15_S3 and DVP_OPERAND_RELOC_11_S4 to allow labels to 
	be used as immediate values.

end-sanitize-sky
start-sanitize-am33
Mon Jun 22 13:36:27 1998  Jeffrey A Law  (law@cygnus.com)

	* m10300-opc.c: Support 4 byte DSP instructions.

end-sanitize-am33
Sat Jun 20 14:46:20 1998  Frank Ch. Eigler  <fche@cygnus.com>

	* mips-dis.c (_print_insn_mips): Fix argument interchange typo.

start-sanitize-am33
Fri Jun 19 16:47:06 1998  Jeffrey A Law  (law@cygnus.com)

	* m10300-opc.c: Support 6 and 7 byte am33 instructions.

end-sanitize-am33
Fri Jun 19 09:16:42 1998  Mark Alexander  <marka@cygnus.com>

	* m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.

start-sanitize-am33
Fri Jun 19 09:42:51 1998  Jeffrey A Law  (law@cygnus.com)

	* m10300-opc.c: Support for 3 byte and 4 byte extended instructions
	found on the mn10300.

end-sanitize-am33
1998-06-18  Ulrich Drepper  <drepper@cygnus.com>

	* i386-dis.c: Add support for fxsave, fxrstor, sysenter and
	sysexit.

Thu Jun 18 10:22:24 1998  John Metzler  <jmetzler@cygnus.com>

	* mips-dis.c (print_insn_little_mips): Previously, instruction
 	printing references the symbol table to determine whether the
 	instruction resides in a block regular instructions or mips16
 	instructions. However, when the disassembler gets used in other
 	environments where the symbol table is not present, we no longer
 	rely in the symbol table, rather, use the low bit of the
 	instructions address to guess. There should be no change for usage
 	of the disassembler in host based programse, gdb ,objdump.
	(print_insn_big_mips): ditto.
	(print_insn_mips): ditto

Wed Jun 17 21:19:01 1998  Mark Alexander  <marka@cygnus.com>

	* m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.

Wed Jun 17 17:49:23 1998  Jeffrey A Law  (law@cygnus.com)

start-sanitize-am33
	* m10300-opc.c (USP, SSP, MSP, PC, IMM4, EPSW, RN0, RM1): New
	operands for the am33.
	(mn10300_opcodes): Add new instructions from the am33.
end-sanitize-am33
	* m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".

Tue Jun 16 13:10:51 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>

	* i386-dis.c (index16): Add '%' to register names.  Use ','
	instead of '+'.

Sat Jun 13 11:33:55 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>

	* i386-dis.c: Don't print opcode suffix when we can figure out the
	size (and gas can!) by register operands, or from the default
	size.
	(putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros.  Rename 'C'
	macro to 'E'.
	(dis386, dis386_twobyte, grps): Use new suffix macros.
	(dis386): Correct imul Ib to imul sIb.  Change jnl to jge to be
	consistent.  Add suffix for call, jmp, lcall, ljmp, iret.  Reverse
	order of cmps operands to agree with Intel docs.  Correct operand
	of aad and aam (Ib -> sIb).  Change ud2b from 0fb8 to 0fb9 to
	agree with Intel docs.
	(print_insn_x86): Print orphan fwait before other prefixes.
	Return correct byte count for orphan fwait with prefixes.  Don't
	print `bound' operands in reverse order.
	(ckprefix): Stop accumulating prefixes if we get fwait.
	(OP_DIR): Print `$' before Ap operands of ljmp, lcall.

Fri Jun 12 13:40:38 1998  Tom Tromey  <tromey@cygnus.com>

	* po/Make-in (all-yes): If maintainer mode, depend on .pot file.
	($(PACKAGE).pot): Unconditionally depend on POTFILES.

Fri Jun 12 11:04:06 1998  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

	Fix problems when bfd_vma is wider than long.
	* i386-dis.c: Make op_address and start_pc unsigned.
	(set_op): Make parameter unsigned.
	(print_insn_x86): Cast to bfd_vma when passing a value to
	print_address_func.
	* ns32k-dis.c (CORE_ADDR): Don't define.
 	(print_insn_ns32k): Change type of addr to bfd_vma.  Use
	bfd_scan_vma to read back address.
	(print_insn_arg): Change type of addr to bfd_vma.  Use sprintf_vma
	to format it.
	* m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
	(NEXTULONG): New definition.
	(print_insn_m68k): Avoid overflow when computing third argument of
	print_insn_arg.
	(print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
	Use disp instead of val to store offset values.
	(print_indexed): Use base_disp instead of word to store base
	displacement, to avoid overflow.
	* m10300-dis.c (disassemble): Cast value to long when computing
	pc-relative address, to get correct sign extension.

Wed Jun 10 15:58:37 1998  Doug Evans  <devans@canuck.cygnus.com>

	* m32r-opc.c: Regenerate.

Tue Jun  9 14:27:57 1998  Nick Clifton  <nickc@cygnus.com>

	* arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
	'mov rX, rY'.  Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>

Mon Jun  8 18:17:21 1998  Nick Clifton  <nickc@cygnus.com>

	* d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.

Fri Jun  5 23:47:55 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>

	* i386-dis.c:  Combine aflag and dflag into sizeflag.  Change OP_*
	functions to void.
	(OP_DSreg): Rename from OP_DSSI.
	(OP_ESreg): Rename from OP_ESDI.
	(Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
	(DSBX): Define.
	(append_seg): Rename from append_prefix.
	(ptr_reg): New function.
	(dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
	Add DSBX for xlat.
	(PREFIX_ADDR): Rename from PREFIX_ADR.
	(float_reg): Add non-broken opcodes for people who don't want
	UNIXWARE_COMPAT.

Fri Jun  5 19:15:04 1998  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

	* m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
	68000/68008/68010.

Wed Jun  3 18:56:22 1998  H.J. Lu  <hjl@gnu.org>

	* i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".

Tue Jun  2 15:06:46 1998  Geoff Keating  <geoffk@ozemail.com.au>

	* ppc-opc.c (powerpc_macros): Support shifts and rotates of size
	0; produce error message for shifts of size 32 (or 64 for 64-bit
	shifts), because the hardware doesn't support them.

start-sanitize-r5900
Mon Jun  1 10:27:26 1998  Jeffrey A Law  (law@cygnus.com)

	* mips-opc.c (c.lt.s): Remove r5900 specific variant.
	(c.le.s): Likewise.

	* vu0.h (sqc2): Fix opcode.

        * mips-opc.c (rsqrt.s): Update based on r5900 ISA manual version 2.1
        (sqrt.s): Likewise.

end-sanitize-r5900
start-sanitize-vr5400
Thu May 28 08:46:09 1998  Catherine Moore <clm@cygnus.com>

       * mips-opc.c (macc, maccu, macchi, macchiu, msac, msacu, msachi, msachiu):
       Change pinfo to use WR_HILO.

end-sanitize-vr5400
Wed May 27 15:29:13 1998  Nick Clifton  <nickc@cygnus.com>

	* d30v-opc.c: Add new operand: Ra3.  Change SHORT_B3, SHORT_B3b,
	LONG_2, LONG_2b formats to use this new operand.

Tue May 26 20:47:48 1998  Stan Cox  <scox@cygnus.com>

	* sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.

Tue May 26 20:45:33 1998  Mark Alexander  <marka@cygnus.com>

	* sparc-dis.c (print_insn_sparc): big endian instruction / little
	endian data support.

Tue May 26 16:14:39 1998  Nick Clifton  <nickc@cygnus.com>

	* d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
	and SHORT_B3b formats to use Rb instead of Ra.

	Add FLAG_MUL16 to MUL2XH opcode.

	Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
	to existing 1.1.1 parallelisation prohibition procedure.

Fri May 22 16:00:00 1998  Doug Evans  <devans@canuck.cygnus.com>

	* cgen-asm.in (insert_normal): Handle empty fields and 64 bit hosts.
	* cgen-dis.in (extract_normal): Likewise.
	* m32r-asm.c,m32r-dis.c: Regenerate.

start-sanitize-sky
Fri May 22 11:44:10 1998  Doug Evans  <devans@canuck.cygnus.com>

	* dvp-opc.c (parse_dotdest): Missing dest -> xyzw.

end-sanitize-sky
start-sanitize-r5900
Wed May 20 00:22:27 1998  Jeffrey A Law  (law@cygnus.com)

	* mips-opc.c (multu1): Add two operand variant for the r5900.

end-sanitize-r5900
Tue May 19 17:36:08 1998  Ian Lance Taylor  <ian@cygnus.com>

	* mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
	with a shift count of 0.

start-sanitize-r5900
Mon May 18 14:27:06 1998  Frank Ch. Eigler  <fche@cygnus.com>

	* mips-opc.c (mult1): Add two-operand variety of mult1 for R5900.

Mon May 18 11:44:00 1998  Jeffrey A Law  (law@cygnus.com)

	* mips-dis.c (print_insn_arg): Handle ';' opcode completer.
	(_print_insn_mips): Likewise.
	* vu0.h (vopmula, vopmsub): Correctly handle opcode/operand
	completers.

end-sanitize-r5900
Fri May 15 14:58:31 1998  Doug Evans  <devans@seba.cygnus.com>

	* cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
	(cgen_hw_lookup_by_num): New function.

start-sanitize-m32rx
	* m32r-opc.c, m32r-opc.h: Regenerate, delete h-abort.

end-sanitize-m32rx
Wed May 13 17:03:59 1998  Doug Evans  <devans@canuck.cygnus.com>

	* m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).

Wed May 13 14:34:31 1998  Mark Alexander  <marka@cygnus.com>

	* sparc-dis.c (print_insn_sparc): Always fetch instructions
	as big-endian on SPARClite.

start-sanitize-m32rx
Tue May 12 13:39:51 1998  Nick Clifton  <nickc@cygnus.com>

	* m32r-opc.c: Regenerated - SPECIAL attribute added to some
	insns.
	* m32r-opc.h: Regenerated - SPECIAL attribute added to some
	insns.

end-sanitize-m32rx
Tue May 12 11:46:31 1998  Richard Henderson  <rth@cygnus.com>

	* d30v-opc.c (pre_defined_register): Remove alias for r0.

start-sanitize-r5900
Mon May 11 13:12:15 1998  Frank Ch. Eigler  <fche@cygnus.com>

	* mips-opc.c (break): Added 20-bit single-operand break
	instruction for R5900 only.

end-sanitize-r5900
Sun May 10 22:37:22 1998  Jeffrey A Law  (law@cygnus.com)

	* po/Make-in (install-info): New target.

Thu May  7 17:15:59 1998  Ian Lance Taylor  <ian@cygnus.com>

	* configure.in (WIN32LIBADD): Add -lintl on cygwin32.
	* configure: Rebuild.

Thu May  7 12:49:46 1998  Frank Ch. Eigler  <fche@cygnus.com>

	* mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
 	variety of ISA2 instructions to set bottom ten bits of trap code.

Thu May  7 11:54:25 1998  Ian Lance Taylor  <ian@cygnus.com>

	* Makefile.am (config.status): Add explicit target so that
	config.status depends upon bfd/configure.in.
	* Makefile.in: Rebuild.

Thu May  7 09:33:02 1998  Frank Ch. Eigler  <fche@cygnus.com>

	* mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
	instructions to set bottom ten bits of break code.
	* mips-dis.c (print_insn_arg): Implement 'q' operand format used
	for above optional argument.

start-sanitize-cygnus
Wed May  6 14:47:17 1998  Doug Evans  <devans@seba.cygnus.com>

	* cgen.sh: s/@ARCH@/${ARCH}/ in opc.h generation.
	* m32r-opc.h: Regenerate.

end-sanitize-cygnus
Wed May  6 15:30:06 1998  Klaus Kaempf  <kkaempf@progis.de>

	* makefile.vms: Run dec c with /nodebug.

Mon May  4 10:19:57 1998  Tom Tromey  <tromey@cygnus.com>

	* Makefile.in: Rebuilt.
	* Makefile.am: Regenerated dependencies with mkdep.

	* opintl.h (_): Define as dgettext.

start-sanitize-cygnus
Fri May  1 13:47:42 1998  Doug Evans  <devans@canuck.cygnus.com>

	* configure.in: Add support for --enable-cgen-maint.
	* Makefile.am (M32R_DEPS): New variable.
	(m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c): Update dependencies.
	* aclocal.m4: Regenerate.
	* Makefile.in: Regenerate.
	* configure: Regenerate.

	* Makefile.am (CGENFILES): Add minsn.scm.

end-sanitize-cygnus
Tue Apr 28 14:12:12 1998  Nick Clifton  <nickc@cygnus.com>

	* cgen-asm.c: Internationalised.
start-sanitize-cygnus
	* cgen-asm.in: Internationalised.
	* cgen-opc.in: Internationalised.
end-sanitize-cygnus
	* m32r-asm.c: Internationalised.
	* m32r-dis.c: Internationalised.
	* m32r-opc.c: Internationalised.

	* aclocal.m4: Regenerated.
	* configure: Regenerated.
	* Makefile.am (POTFILES): Remove inclusion of BFD_H.
	* Makefile.in: Rebuild.
	* po/POTFILES.in: Rebuilt using rule in Makefile.in.
	* po/opcodes.pot: Rebuilt after changing POTFILES.in.

Tue Apr 28 13:13:13 1998  Ian Lance Taylor  <ian@cygnus.com>

	* configure.in: Call AC_ISC_POSIX near start.  Move CY_GNU_GETTEXT
	after AC_PROG_CC.
	* aclocal.m4, configure: Rebuild with current tools.

Mon Apr 27 14:31:00 1998  Nick Clifton  <nickc@cygnus.com>

	* opintl.h: New file - contains internationalisation macros used
	by source files in this directory.
	* po/: New subdirectory - contains internationalisation files.
	* po/Make-in: New file - Makefile constructor.
	* po/POTFILES.in: New file - list of files in opcodes directory
	that should be scan for internationalisation macros.
	* po/opcodes.pot: New file - list of internationisation strings
	found in files mentioned in po/POTFILES.in.
	* Makefile.am: Add rule to build po/POTFILES.in.  Add SUBDIRS
	entry.  Add intl directory to include paths.
	* acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
	HAVE_STRCPY, HAVE_LC_MESSAGES
	* configure.in: Add rule to build Makefile in po subdirectory.
	* Makefile.in: Rebuilt.
	* aclocal.m4: Rebuilt.
	* config.in: Rebuilt.
	* configure: Rebuilt.
	* alpha-opc.c: Internationalised.
	* arc-dis.c: Internationalised.
	* arc-opc.c: Internationalised.
	* arm-dis.c: Internationalised.
	* cgen-asm.c: Internationalised.
	* d30v-dis.c: Internationalised.
	* dis-buf.c: Internationalised.
start-sanitize-sky
	* dvp-dis.c: Internationalised.
	* dvp-opc.c: Internationalised.
end-sanitize-sky
	* h8300-dis.c: Internationalised.
	* h8500-dis.c: Internationalised.
	* i386-dis.c: Internationalised.
	* m10200-dis.c: Internationalised.
	* m10300-dis.c: Internationalised.
	* m68k-dis.c: Internationalised.
	* m88k-dis.c: Internationalised.
	* mips-dis.c: Internationalised.
	* ns32k-dis.c: Internationalised.
	* opintl.h: Internationalised.
	* ppc-opc.c: Internationalised.
	* sparc-dis.c: Internationalised.
	* v850-dis.c: Internationalised.
	* v850-opc.c: Internationalised.

Mon Apr 27 10:33:56 1998  Doug Evans  <devans@seba.cygnus.com>

	* cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
	(asm_hash_table_entries): New variable.
	(cgen_asm_init): Free asm_hash_table_entries.
	(hash_insn_array,hash_insn_list): New functions.
	(build_asm_hash_table): Use them.  Hash macro insns as well.
	(cgen_asm_lookup_insn): Update.
	* cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
	(dis_hash_table_entries): New variable.
	(cgen_dis_init): Free dis_hash_table_entries.
	(hash_insn_array,hash_insn_list): New functions.
	(build_dis_hash_table): Use them.  Hash macro insns as well.
	(cgen_dis_lookup_insn): Update.
	* cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
	(cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
	(cgen_macro_insn_count): New function.
	* cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
	All callers updated.  Sanity check result of extract fn.
	(@arch@_cgen_get_insn_operands): Change result type to void.
	Delete args insn_value, length.  New arg fields.  All callers updated.
	(@arch@_cgen_lookup_get_insn_operands): New function.
	* m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.

Fri Apr 24 16:07:57 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>

	* i386-dis.c (OP_DSSI): Print segment override.

start-sanitize-r5900
Thu Apr 23 12:32:07 1998  Frank Ch. Eigler  <fche@cygnus.com>

	* mips-opc.c (msub.s): Correct mask pattern for disassembly.

end-sanitize-r5900
start-sanitize-r5900
Mon Apr 20 19:11:55 1998  Frank Ch. Eigler  <fche@cygnus.com>

	* mips-opc.c (madd.s): Correct mask pattern for disassembly.

end-sanitize-r5900
start-sanitize-r5900
Sat Apr 18 00:29:18 1998  Jeffrey A Law  (law@cygnus.com)

	* vu0.h (vlqd, vlqi): Update per revised specs.

end-sanitize-r5900
start-sanitize-sky
Thu Apr 16 11:44:59 1998  Doug Evans  <devans@canuck.cygnus.com>

	* dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
	(vif_operands): Update.
	(vif_get_unpackloc): Delete.
	(state_vif_unpackloc{,_star_p}): Delete.
	(dvp_opcode_init_parse): Update.
	(vif_unpack_len_value): Avoid divide by zero.

end-sanitize-sky
start-sanitize-r5900
Wed Apr 15 10:30:07 1998   Frank Ch. Eigler  <fche@cygnus.com>

	* vu0.h: Specs changed for VCALLMSR bit pattern.
	* mips-dis.c: (print_insn_arg) Matching change.

end-sanitize-r5900
Mon Apr 13 16:59:39 1998  Nick Clifton  <nickc@cygnus.com>

	* arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
	operator.

Mon Apr 13 16:50:27 1998  Ian Lance Taylor  <ian@cygnus.com>

	* Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
	(libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
	* configure.in: Define and substitute WIN32LDFLAGS and
	WIN32LIBADD.
	* aclocal.m4: Rebuild with new libtool.
	* configure, Makefile.in: Rebuild.

start-sanitize-r5900
Mon Apr 13 16:02:02 1998  Frank Ch. Eigler  <fche@cygnus.com>

	* vu0.h: Corrected bit pattern for VMAXI opcode.

end-sanitize-r5900
Fri Apr 10 18:14:31 1998  Doug Evans  <devans@canuck.cygnus.com>

	* m32r-opc.c: Regenerate.

start-sanitize-sky
Mon Apr  6 17:16:48 1998  Doug Evans  <devans@canuck.cygnus.com>

	* dvp-opc.c (vif_macros): Tweak unpackloc operand.
	(dvp_expand_macro): Implement.
	(insert_vif_datalen): Record value with max+1 -> 0 conversion.
	(vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.

end-sanitize-sky
Sun Apr  5 16:04:39 1998  H.J. Lu  <hjl@gnu.org>

	* Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
	before trying to copy it.
	* Makefile.in: Rebuild.

Thu Apr  2 17:25:49 1998  Nick Clifton  <nickc@cygnus.com>

	* m32r-opc.c: Use signed immediate values for CMPUI instruction.

start-sanitize-m32rx
Thu Apr  2 16:44:23 1998  Nick Clifton  <nickc@cygnus.com>

	* m32r-opc.c: Fix bit patterns for SAT and SATB.

end-sanitize-m32rx
Wed Apr  1 16:20:27 1998  Ian Dall  <Ian.Dall@dsto.defence.gov.au>

        * ns32k-dis.c (bit_extract_simple): New function to extract bits
        from an arbitrary valid buffer instead of fetching them on demand
        using fetch_data().
        (invalid_float): use bit_extract_simple() instead of bit_extract().

start-sanitize-m32rx
Wed Apr  1 14:57:54 1998  Nick Clifton  <nickc@cygnus.com>

	* m32r-opc.c: Fix SATB bit pattern.  Add extra control registers.
	* m32r-opc.h: Add extra control registers.

end-sanitize-m32rx
Tue Mar 31 11:09:08 1998  Ian Lance Taylor  <ian@cygnus.com>

	From H.J. Lu <hjl@gnu.org>:
	* i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
	to Ev for both.

Mon Mar 30 17:32:03 1998  Ian Lance Taylor  <ian@cygnus.com>

	* Branched binutils 2.9.

Mon Mar 30 15:18:00 1998  Ken Raeburn  <raeburn@cygnus.com>

	* d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
	disassembling last 4 bytes of a section.

Fri Mar 27 18:08:13 1998  Ian Lance Taylor  <ian@cygnus.com>

	Fix some gcc -Wall warnings:
	* arc-dis.c (print_insn): Add casts to avoid warnings.
	* cgen-opc.c (cgen_keyword_lookup_name): Likewise.
	* d10v-dis.c (dis_long, dis_2_short): Likewise.
start-sanitize-sky
	* dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
	(parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
	(parse_bc, parse_vfreg, parse_accdest): Likewise.
	(parse_ffstreg, parse_vif_mode): Likewise.
end-sanitize-sky
	* m10200-dis.c (disassemble): Likewise.
	* m10300-dis.c (disassemble): Likewise.
	* ns32k-dis.c (print_insn_ns32k): Likewise.
	* ppc-opc.c (insert_ral, insert_ram): Likewise.
	* cgen-dis.c (build_dis_hash_table): Remove used local variables.
	* cgen-opc.c (cgen_keyword_search_next): Likewise.
	* d10v-dis.c (dis_long, dis_2_short): Likewise.
	* d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
start-sanitize-sky
	* dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
	* dvp-opc.c (parse_dest1, print_uflags): Likewise.
	(parse_gif_nloop, dvp_opcode_init_tables): Likewise.
end-sanitize-sky
	* ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
start-sanitize-tic80
	* tic80-dis.c (print_one_instruction): Likewise.
end-sanitize-tic80
	* w65-dis.c (print_operand): Likewise.
	* z8k-dis.c (fetch_data): Likewise.
	* a29k-dis.c: Add return type for find_byte_func_type.
	* arc-opc.c: Include <stdio.h>.  Remove declarations of
	insert_multshift and extract_multshift.
	* d30v-dis.c (lookup_opcode): Parenthesize assignments in
	conditionals.
	(extract_value): Fully parenthesize expression.
start-sanitize-sky
	* dvp-opc.c: Include <ctype.h>.
	(print_sdest): Add default case to switch.
end-sanitize-sky
	* h8500-dis.c (print_insn_h8500): Initialize local variables.
	* h8500-opc.h (h8500_table): Fully bracket initializer.
	* w65-opc.h (optable): Likewise.
	* i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
	* i386-dis.c (OP_E): Initialize local variables.
	* m10200-dis.c (print_insn_mn10200): Likewise.
	* mips-dis.c (print_insn_mips16): Likewise.
	* sh-dis.c (print_insn_shx): Likewise.
	* v850-dis.c (print_insn_v850): Likewise.
	* ns32k-dis.c (print_insn_arg): Declare.
	(get_displacement, invalid_float): Declare.
	(list_search, sign_extend, flip_bytes): Declare return type.
	(get_displacement): Likewise.
	(print_insn_arg): Likewise.  Make d int.  Fix sprintf format
	string.
	(print_insn_ns32k): Make i unsigned.
	(invalid_float): Make static.  Declare type of val.
	* tic30-dis.c (print_par_insn): Make i size_t.  Don't check strlen
	on each for iteration.
	* tic30-dis.c (get_indirect_operand): Likewise.
	* z8k-dis.c (print_insn_z8001): Declare return type.
	(print_insn_z8002): Likewise.
	(unparse_instr): Fix sprintf format strings.

Fri Mar 27 00:05:23 1998  Jeffrey A Law  (law@cygnus.com)

	* mips-opc.c: Add "sync.l" and "sync.p".

start-sanitize-sky
Thu Mar 26 13:27:37 1998  Doug Evans  <devans@canuck.cygnus.com>

	* dvp-opc.c (extract_vif_datalen): Rewrite.
	(vif_insn_len): Perform 0->max+1 conversion for direct length.

Wed Mar 25 13:32:36 1998  Doug Evans  <devans@canuck.cygnus.com>

	* dvp-dis.c (print_insn): Print unpack address in hex.
	* dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
	Don't skip over '*', just record it.
	(insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
	(parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
	Don't skip over '*', just record it.
	(insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
	(vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
	(vif_opcodes): Likewise.
	(state_vif_{mpg,unpack}loc_star_p): New static locals.
	(vif_macros,vif_macro_count): New globals.
	(vif_unpack_len_value): New arguments wl,cl.  All callers updated.
	(vif_set_{mpg,unpack}loc): Delete.  All callers updated.
	(vif_get_wl_cl): New function.
	(dvp_opcode_init_parse): Init mpgloc,unpackloc state.

end-sanitize-sky
Wed Mar 25 14:32:48 1998  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

	* m68k-dis.c (print_insn_m68k): Use info->mach to select the
	default m68k variant to recognize.

	* i960-dis.c (pinsn): Change type of first argument to bfd_vma.
	(ctrl, cobr, mem, ea): Likewise.
	(print_addr): Likewise.  Remove cast.
	(ea): Cast argument of print_addr to bfd_vma.

	* cgen-asm.c (cgen_parse_signed_integer): Fix type of local
	variable value.
	(cgen_parse_unsigned_integer): Likewise.
	(cgen_parse_address): Likewise.

Wed Mar 25 14:31:31 1998  Ian Lance Taylor  <ian@cygnus.com>

	* i960-dis.c (ctrl): Add full braces to structure initialization.
	(cobr, mem, reg): Likewise.
	(ea): Correct parenthesization in expression.

	* cgen-asm.c: Include <ctype.h>.
	(build_asm_hash_table): Remove unused local variable i.
	(cgen_parse_keyword): Add casts to avoid warnings.

	* arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
	symbol.  Fix indentation.
	(print_insn_little_arm): Likewise.

start-sanitize-r5900
Tue Mar 24 18:11:13 1998  Jeffrey A Law  (law@cygnus.com)

        * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
        opcode extensions.

end-sanitize-r5900
start-sanitize-m32rx
Mon Mar 23 11:32:11 1998  Nick Clifton  <nickc@cygnus.com>

	* m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
	(PR15418).

end-sanitize-m32rx
start-sanitize-sky
Mon Mar 23 09:45:04 1998  Doug Evans  <devans@canuck.cygnus.com>

	* dvp-opc.c (vif_operand_datalen_special): New global.

end-sanitize-sky
start-sanitize-r5900
Sun Mar 22 13:00:14 1998  Jeffrey A Law  (law@cygnus.com)

        * vu0.h (vcallms): Use 'O' for call target operand.
        * mips-dis.c (print_insn_arg): Handle 'O'.

end-sanitize-r5900
Fri Mar 20 18:55:18 1998  Ian Lance Taylor  <ian@cygnus.com>

	* configure.in: Use AM_DISABLE_SHARED.
	* aclocal.m4, configure: Rebuild with libtool 1.2.

start-sanitize-r5900
Fri Mar 20 09:01:31 1998  Jeffrey A Law  (law@cygnus.com)

        * mips-dis.c: Change '%' to '#' in r5900 support.
        * vu0.h: Likewise.

end-sanitize-r5900
Thu Mar 19 15:46:53 1998  Nick Clifton  <nickc@cygnus.com>

	These patches are courtesy of Jonathan Walton and Tony Thompson
	(athompso@cambridge.arm.com).

	* arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
	relative addresses.

	* arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
	both the offset and the label closest to the destination.

start-sanitize-r5900
Thu Mar 19 13:53:25 1998  Jeffrey A Law  (law@cygnus.com)

	* vu0.h: New file with cop2/vu0 instructions.
	* mips-opc.c: Include vu0.h.
	* mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
	J, Q, X, and U.
	(print_insn_mips): Do not emit a tab after an instruction if the
	first arg is an instruction completer (&).  If the next arg is an
	escape character (%), then print the next arg verbatim.
	* Makefile.am (mips-opc.lo): Depend on vu0.h

end-sanitize-r5900
start-sanitize-sky
Thu Mar 19 10:42:51 1998  Doug Evans  <devans@canuck.cygnus.com>

	* dvp-opc.c (vif_opcodes): Add stcycl.

Tue Mar 17 10:53:58 1998  Doug Evans  <devans@canuck.cygnus.com>

	* dvp-dis.c (print_dma): Change length from 16 to 8.

end-sanitize-sky
Sat Mar 14 23:47:14 1998  Doug Evans  <devans@seba.cygnus.com>

	* m32r-opc.h: Regenerate.

start-sanitize-sky
Thu Mar 12 09:18:54 1998  Doug Evans  <devans@canuck.cygnus.com>

	* dvp-opc.c (print_dest1): Print dest spec again.
	(print_vfreg,print_accdest): Likewise.
	(vif_unpack_len): Round result up to word boundary.

end-sanitize-sky
start-sanitize-vr4320
Tue Mar 10 15:57:23 1998  Gavin Koch  <gavin@cygnus.com>

	* mips-opc.c ("clz","dclz"): Added the 4320 versions.

Mon Mar  9 15:22:06 1998  Gavin Koch  <gavin@cygnus.com>

	* mips-opc.c ("macc*","mul*"): Added the 4320 versions
	of these.

end-sanitize-vr4320
start-sanitize-sky
Fri Mar  6 11:27:53 1998  Doug Evans  <devans@canuck.cygnus.com>

	* dvp-dis.c (print_gif): Fix length calcs for gifimage.
	(print_insn): Do mask comparison on proper opcode word.
	Print unsigned values in hex.
	* dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
	(parse_bc): Catch missing dest.
	(parse_vfreg): Replace atoi call with strtol.
	(parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
	(parse_bcftreg,parse_ffstreg): Handle missing dest.
	(extract_gif_eop): New function.
	(gif_operands): Update eop entry.
	(VGIFOP,VGIFNREGS): Fix calcs.
	(extract_gif_prim): Set *pinvalid to 1 if prim not used.
	(gif_regs): Add entry for unused 11 case.
	(print_gif_regs): Print empty list instead of nothing.
	(extract_gif_nloop): Fix value calc.
	(print_gif_nloop): Always print value, even if 0.
	(insert_vif_wlcl,extract_vif_wlcl): New functions.
	(vif_operands): Use them for wl,cl fields.
	(state_vif_wl,state_vif_cl): New static locals.
	(parse_vif_mode): Handle numeric args.
	(vif_unpack_len_value,vif_unpack_len): New functions.
	(vif_insn_len): Call vif_unpack_len.

end-sanitize-sky
Wed Mar  4 12:08:14 1998  Doug Evans  <devans@canuck.cygnus.com>

	* m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.

Tue Mar  3 18:51:22 1998  Doug Evans  <devans@seba.cygnus.com>

	* cgen-asm.in: Move insertion of generated routines to top of file.
 	(insert_normal): Add prototype.  Delete `shift' arg.
	* cgen-dis.in: Move insertion of generated routines to top of file.
	(extract_normal): Add prototype.  Delete `shift' arg.
	(print_normal): Add prototype.  Call CGEN_PRINT_NORMAL if defined.
	(print_keyword): Add prototype.  Fix type of `attrs' arg.

start-sanitize-vr4320
Tue Mar  3 11:47:58 1998  Gavin Koch  <gavin@cygnus.com>

	* mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
	* mips-opc.c ("mac","dmac") : Added 4320 insns.

end-sanitize-vr4320
Sat Feb 28 16:02:34 1998  Nick Clifton  <nickc@cygnus.com>

	* arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
	assume that info->symbols is non-empty.

Sat Feb 28 12:19:05 1998  Richard Henderson  <rth@cygnus.com>

	* alpha-opc.c (cvtqs) There is no such thing.
	(cvttq): Missing most of the /*d variants.

start-sanitize-r5900
Fri Feb 27 13:16:42 1998  Andrew Cagney  <cagney@b1.cygnus.com>

	* mips-opc.c (r5900/madd.s): Takes three operands, not four.  Fix
	opcode.
	(r5900/min.s): Incorrect opcode ....,101001 not ...110000.
	(r5900/msub.s): Takes three operands, not four.  Fix opcode.

end-sanitize-r5900
Thu Feb 26 15:53:09 1998  Michael Meissner  <meissner@cygnus.com>

	* d30v-opc.c (d30v_opcode_table): Indicate which instructions are
	delayed branches or jumps.

start-sanitize-sky
Fri Feb 27 10:04:19 1998  Doug Evans  <devans@canuck.cygnus.com>

	* dvp-opc.c (vif_operands): Add unpack[u] support.
	(vif_opcodes): Ditto.
	(*_vif_imrubits): Renamed from *_vif_imrbits.

Wed Feb 25 00:27:44 1998  Doug Evans  <devans@canuck.cygnus.com>

	* dvp-dis.c (print_insn): Handle word number.
	Handle mips address vs vu address.
	* dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
	(dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
	({insert,extract}_dma_addr): Fix word ofset.
	({insert,print}_gif_regs): Fix encode/decode.

end-sanitize-sky
Tue Feb 24 10:46:44 1998  Doug Evans  <devans@canuck.cygnus.com>

	* arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
	to *info->symbols.
	* mips-dis.c (print_insn_{big,little}_mips): Likewise.
	* tic30-dis.c (print_branch): Likewise.
start-sanitize-sky
	* mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
	* dvp-dis.c (dvp_info_mach_type): New function.
	(print_insn_dvp): Call it.
	(print_vif): Return length of 4 if mpg or direct insn so following
	insns get properly disabled.
	(print_gif): Fix word order.
	* dvp-opc.c (vif_insn_len): New argument `pcpu'.  All callers updated.
	(gif_operands): Fix word order.
	(gif_opcodes): Likewise.
	({insert,extract,print}_gif_regs): Likewise.
	(gif_regs): Add new register number/name changes.
	(dma_opcodes): Add dmarefe insn.
end-sanitize-sky

Tue Feb 24 11:06:18 1998  Nick Clifton  <nickc@cygnus.com>

	* arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
	saved_symbol code as it is no longer needed.

Mon Feb 23 13:16:17 1998  Doug Evans  <devans@seba.cygnus.com>

	* cgen-asm.c: Include symcat.h.
	* cgen-dis.c,cgen-opc.c,cgen-asm.in,cgen-dis.in: Ditto.

	* m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.

start-sanitize-sky
Mon Feb 23 09:51:39 1998  Doug Evans  <devans@canuck.cygnus.com>

	* dvp-opc.c (extra_dma_flags): Fix typos.
	(dma_operands): Fix word numbers.
	(dma_opcodes): Likewise.
	({insert,extract}_dma_flags): Likewise.

end-sanitize-sky
Mon Feb 23 10:34:58 1998  Jeffrey A Law  (law@cygnus.com)

	* mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.

start-sanitize-sky
Fri Feb 20 18:02:20 1998  Doug Evans  <devans@canuck.cygnus.com>

	* dvp-dis.c (print_gif): Complete.
	* dvp-opc.c (gif_operands,gif_opcodes): Complete.
	(state_gif_{nregs,regs,nloop}): New static locals.
	(*_gif_*): Complete.
	(dvp_opcode_init_{parse,print}): Init gif state locals.
	(extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
	(vif_insn_len): Handle `unpack'.
	({insert,extract}_dma_flags): Complete.

end-sanitize-sky
start-sanitize-r5900
Fri Feb 20 01:23:16 1998  Jeffrey A Law  (law@cygnus.com)

        * mips-opc.c (mula.s): Renamed from multa.s.

end-sanitize-r5900
Thu Feb 19 16:51:13 1998  Doug Evans  <devans@canuck.cygnus.com>

	* m32r-opc.[ch]: Regenerate.

start-sanitize-sky
Thu Feb 19 02:11:39 1998  Doug Evans  <devans@charmed.cygnus.com>

	* dvp-opc.c (dma_operands): Rewrite.
	(dma_operand_{count,addr}): New globals.
	(dma_opcodes): Rewrite.  Add "dmaend" with no operands.
	(insert_dma_addr): Insert value into insn.
	(extract_dma_addr): Extract value from insn.

Wed Feb 18 15:46:46 1998  Doug Evans  <devans@canuck.cygnus.com>

	* dvp-dis.c (print_vu): Handle loi insns.
	(print_insn): Likewise.
	* dvp-opc.c (vu_lower_opcodes): Add "loi".
	(vu_operands): Make LDEST1 a FAKE operand.
	(parse_dest1): Allow elided argument.
	(print_dest1): Don't print the argument.

Tue Feb 17 18:48:25 1998  Doug Evans  <devans@canuck.cygnus.com>

	* dvp-opc.c (parse_vfreg): Dest spec is optional.
	(print_vfreg): Don't print dest spec.
	(parse_accdest): Dest spec is optional.
	(print_accdest): Don't print dest spec.

end-sanitize-sky
Tue Feb 17 17:14:50 1998  Doug Evans  <devans@seba.cygnus.com>

	* Makefile.am (CGENFILES): Update.
	* Makefile.in: Regenerate.
	* cgen-asm.in (insert_normal): Result is error message now.
	Validate value to be inserted.
	(insert_insn_normal): Result is error message now.
	(@arch@_cgen_assemble_insn): Update.
	* cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
	arguments.  Don't perform validation here.
	* m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.

Fri Feb 13 14:26:06 1998  Doug Evans  <devans@canuck.cygnus.com>

	* cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
	operand instance list.
	* m32r-opc.c: Regenerate.

Fri Feb 13 14:53:02 1998  Ian Lance Taylor  <ian@cygnus.com>

	* Makefile.am (AUTOMAKE_OPTIONS): Define.
	* configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.

Fri Feb 13 10:21:09 1998  Mark Alexander  <marka@cygnus.com>

	* m10300-dis.c (print_insn_mn10300): Recognize break instruction.

Fri Feb 13 13:12:14 1998  Ian Lance Taylor  <ian@cygnus.com>

	* configure.in: Get the version number from BFD.
	* configure: Rebuild.

	From H.J. Lu <hjl@gnu.org>:
	* Makefile.am (libopcodes_la_LDFLAGS): Define.
	* Makefile.in: Rebuild.

Fri Feb 13 09:50:32 1998  Nick Clifton  <nickc@cygnus.com>

	* m32r-opc.c: Regenerate.
	* m32r-opc.h: Regenerate.

Thu Feb 12 11:01:40 1998  Doug Evans  <devans@canuck.cygnus.com>

	* cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
	Ignore ALIAS insns if asked to.
	(@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
	* m32r-opc.c: Regenerate.

start-sanitize-sky
	* dvp.opc.c: Nicely format opcode tables.
	(vu_operands): New element UFLAGS.
	(parse_uflags,print_uflags): New functions.
	(vu_upper_opcodes): Add UFLAGS to all insns.

end-sanitize-sky
Thu Feb 12 03:41:00 1998  J"orn Rennecke  <amylaar@cygnus.co.uk>

	Fix rac to accept only a0:
	* d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
	Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
	Introduce OPERAND_GPR.
	* d10v-dis.c (print_operand): Likewise.

Wed Feb 11 18:58:34 1998  Doug Evans  <devans@seba.cygnus.com>

	* cgen-opc.in: New file.
	* cgen.sh: Translate @ARCH@.  Cat cgen-opc.in into @arch@-opc.c.
	* Makefile.am (CGENFILES): Add cgen-opc.in.
	* Makefile.in: Regenerate.

	* cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
	(cgen_hw_lookup): Make result const.

	* cgen-dis.in (*): Use PTR instead of void *.
	(print_insn): Delete unused vars `i', `syntax'.

	* m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.

start-sanitize-sky
Tue Feb 10 14:56:24 1998  Doug Evans  <devans@canuck.cygnus.com>

	* dvp-opc.c (*): pke,gpuif renamed to vif,gif.
	(vif_opcodes): Update renamed insns.
	* dvp-dis.c (*): Likewise.

end-sanitize-sky
Sat Feb  7 15:30:27 1998  Ian Lance Taylor  <ian@cygnus.com>

	* configure, aclocal.m4: Rebuild with new libtool.

Thu Feb  5 17:56:10 1998  Michael Meissner  <meissner@cygnus.com>

	* d30v-opc.c (repeat{,i} instructions): Repeat/repeati
	instructions use a PC relative branch, not absolute.

Wed Feb  4 19:17:37 1998  Ian Lance Taylor  <ian@cygnus.com>

	* configure.in: Set libtool_enable_shared rather than
	libtool_shared.  Remove diversion hack.
	* configure, Makefile.in, aclocal.m4: Rebuild with new libtool.

Tue Feb  3 17:19:40 1998  Doug Evans  <devans@seba.cygnus.com>

	* cgen-opc.c (cgen_set_cpu): Initialize hardware table.
	* m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.

Mon Feb  2 19:22:15 1998  Steve Haworth  <steve@pm.cse.rmit.EDU.AU>

	* tic30-dis.c: New file.
	* disassemble.c	(disassembler): Add bfd_arch_tic30 case.
	* configure.in: Handle bfd_tic30_arch.
	* Makefile.am: Rebuild dependencies.
	(CFILES): Add tic30-dis.c
	(ALL_MACHINES): Add tic30-dis.lo.
	* configure, Makefile.in: Rebuild.

start-sanitize-m32rx
Mon Feb  2 11:04:08 1998  Nick Clifton  <nickc@cygnus.com>

	* m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
	versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
	macwhi-a and macwlo-a instructions.

end-sanitize-m32rx
start-sanitize-sky
Fri Jan 30 17:39:21 1998  Ian Carmichael  <iancarm@cygnus.com>

	* dvp-opc.c, fixed encoding of a bunch of instructions to
	be consistent with the asmvu assembler (and inconsistent
	with the specification).

Thu Jan 29 18:14:56 1998  Ian Carmichael  <iancarm@cygnus.com>

	* dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
	in the opcode table.  The pkemscalf instruction must come first.

Thu Jan 29 16:47:24 1998  Ian Carmichael  <iancarm@cygnus.com>

	* dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.

end-sanitize-sky
Thu Jan 29 13:02:56 1998  Doug Evans  <devans@canuck.cygnus.com>

	* m32r-opc.h (HAVE_CPU_M32R): Define.

start-sanitize-sky
Wed Jan 28 13:46:19 1998  Doug Evans  <devans@canuck.cygnus.com>

	* dvp-dis.c, dvp-opc.c: New files.
	* configure.in: Compile them if bfd_dvp_arch, as well as mips.
	* configure: Regenerate.
	* Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
	(dvp-dis.lo,dvp-opc.lo): Add rules for.
	(mips-dis.lo): Compile with @archdefs@.
	* Makefile.in: Regenerate.
	* disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
	* mips-dis.c (print_insn_little_mips): Check for DVP insns.

end-sanitize-sky
Wed Jan 28 09:55:03 1998  Nick Clifton  <nickc@cygnus.com>

	* v850-opc.c (insertion routines): If both alignment and size is
	wrong then report this.

Tue Jan 27 21:52:59 1998  Jeffrey A Law  (law@cygnus.com)

	* mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
	Only recognize instructions for the current target_processor.

Thu Jan 22 16:20:17 1998  Fred Fish  <fnf@cygnus.com>

	* d10v-dis.c (PC_MASK): Correct value.
	(print_operand): If there's a reloc, don't calculate the
 	address because they could be in different sections.

start-sanitize-cygnus
Thu Jan 22 16:10:32 1998  Doug Evans  <devans@seba.cygnus.com>

	* cgen.sh: Rewrite to be like simulator's version.
	* Makefile.am (cgen): Update call to cgen.sh.
	* Makefile.in: Regenerate

end-sanitize-cygnus
Fri Jan 16 15:29:11 1998  Jim Blandy  <jimb@zwingli.cygnus.com>

	* mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
 	instruction after the 4650's "mul" instruction; nobody's using the
 	4010 these days.  If object files someday indicate which processor
	variant they're intended for, we can do a better job at this.

start-sanitize-r5900
Tue Jan 13 09:21:56 1998  Jeffrey A Law  (law@cygnus.com)

	* mips-opc.c (c.lt.s): Add r5900 variant.
	(c.le.s): Likewise.

end-sanitize-r5900
Mon Jan 12 14:43:54 1998  Doug Evans  <devans@seba.cygnus.com>

	* cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
	table provided entry size.  Use CGEN_INSN_MNEMONIC.
	(cgen_parse_keyword): Rewrite.
	* cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
	table provided entry size.  Use CGEN_INSN_MASK_BITSIZE.
	* cgen-opc.c: Clean up pass over `struct foo' usage.
	(cgen_keyword_lookup_value): Handle "" entry.
	(cgen_keyword_add): Likewise.
start-sanitize-cygnus
	* Makefile.am: Add cgen support.
	* Makefile.in: Regenerate.
	* configure.in: Add cgen support.
	* configure: Regenerate.
	* aclocal.m4: Regenerate.
	* cgen.sh, cgen-asm.in, cgen-dis.in: New files.
end-sanitize-cygnus

Mon Dec 22 12:37:06 1997  Ian Lance Taylor  <ian@cygnus.com>

	* mips-opc.c: Add FP_D to s.d instruction flags.

Wed Dec 17 11:38:29 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

	* m68k-opc.c (halt, pulse): Enable them on the 68060.

start-sanitize-tic80
Tue Dec 16 15:22:53 1997  Fred Fish  <fnf@cygnus.com>

	* tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
	PC relative offset forms before the 15 bit forms.  An assembler command
	line option now chooses the default.

end-sanitize-tic80
start-sanitize-r5900
Tue Dec 16 13:24:22 1997  Jeffrey A Law  (law@cygnus.com)

	* mips-opc.c: Add many missing r5900 instructions.

end-sanitize-r5900
Tue Dec 16 15:22:51 1997  Michael Meissner  <meissner@cygnus.com>

	* d30v-opc.c (d30v_opcode_table): Set new flags bits
	FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.

1997-12-15  Brendan Kehoe  <brendan@lisa.cygnus.com>

	* configure: Only build libopcodes shared if --enable-shared's value
	was `yes', or was set to `*opcodes*'.
	* aclocal.m4: Likewise.
	* NOTE: this really needs to be fixed in libtool/libtool.m4, the
	original source of this bit of code.  It's not clear what the best fix
	would be, though.

start-sanitize-r5900
Mon Dec 15 12:43:36 1997  Jeffrey A Law  (law@cygnus.com)

	* mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
end-sanitize-r5900
start-sanitize-tic80
Fri Dec 12 11:57:04 1997  Fred Fish  <fnf@cygnus.com>

	* tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
	(tic80_opcodes): Reorder table entries to put the 32 bit PC relative
 	offset forms before the 15 bit forms, to default to the long forms.

end-sanitize-tic80
Fri Dec 12 01:32:30 1997  Richard Henderson  <rth@cygnus.com>

	* alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.

Wed Dec 10 17:42:35 1997  Nick Clifton  <nickc@cygnus.com>

	* arm-dis.c (print_insn_little_arm): Prevent examination of stored
	symbol if none is present.
	(print_insn_big_arm):  Prevent examination of stored symbol if
	none is present.

Thu Oct 23 21:13:37 1997  Fred Fish  <fnf@cygnus.com>

	* d10v-opc.c (d10v_opcodes): Correct entry for RTE.

Mon Dec  8 11:21:07 1997  Nick Clifton  <nickc@cygnus.com>

	* disassemble.c: Remove disasm_symaddr() function.

	* arm-dis.c: Use info->symbol instead of info->flags to determine
	if disassmbly should be in Thumb or Arm mode.

Tue Dec  2 09:54:27 1997  Nick Clifton  <nickc@cygnus.com>

	* arm-dis.c: Add support for disassembling Thumb opcodes.
	(print_insn_thumb): New function.

	* disassemble.c (disasm_symaddr): New function.

	* arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
	(thumb_opcodes): Table of Thumb opcodes.

Mon Dec  1 12:25:57 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

	* m68k-opc.c (btst): Change Dd@s to Dd;b.

	* m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
	and 'v' as operand types.

Mon Dec  1 11:56:50 1997  Ian Lance Taylor  <ian@cygnus.com>

	* m68k-opc.c: Add argument for lpstop.  From Olivier Carmona
	<olivier.carmona@di.epfl.ch>.
	* m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
	which has a two word opcode with a one word argument.

Sun Nov 23 22:25:21 1997  Michael Meissner  <meissner@cygnus.com>

	* d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
	unsigned, not signed.
	(d30v_format_table): Add SHORT_CMPU cases for cmpu.

Wed Nov 19 17:42:35 1997  Richard Henderson  <rth@cygnus.com>

        * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
        * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
        (ftrv): Slay the cut-and-paste monster.

Tue Nov 18 23:10:03 1997  J"orn Rennecke  <amylaar@cygnus.co.uk>

	* d10v-dis.c (print_operand):
	Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.

Tue Nov 18 18:45:14 1997  J"orn Rennecke  <amylaar@cygnus.co.uk>

	* d10v-opc.c (OPERAND_FLAG): Split into:
	(OPERAND_FFLAG, OPERAND_CFLAG) .
	(FSRC): Split into:
	(FFSRC, CFSRC).

Thu Nov 13 11:05:33 1997  Gavin Koch  <gavin@cygnus.com>

	* mips-opc.c: Move the INSN_MACRO ISA value to the membership
	field for all INSN_MACRO's.
	* mips16-opc.c: same

Wed Nov 12 10:16:57 1997  Gavin Koch  <gavin@cygnus.com>

	* mips-opc.c (sync,cache): These are 3900 insns.

Tue Nov 11 23:53:41 1997  J"orn Rennecke <amylaar@cygnus.co.uk>

	sh-opc.h (sh_table): Remove ftst/nan.

start-sanitize-vr5400
Mon Nov  3 13:23:15 1997  Ken Raeburn  <raeburn@cygnus.com>

	* mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
	(c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
	last.
	* mips-dis.c (print_insn_arg): Handle VR5400 operand types.

end-sanitize-vr5400
start-sanitize-tx49
Wed Oct 29 15:10:56 1997  Gavin Koch  <gavin@cygnus.com>

	* mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
	Add tx49 insns and configury.

end-sanitize-tx49
Tue Oct 28 17:59:32 1997  Ken Raeburn  <raeburn@cygnus.com>

	* mips-opc.c (ffc, ffs): Fix mask.

Tue Oct 28 16:34:54 1997  Michael Meissner  <meissner@cygnus.com>

	* d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
	control registers.

Mon Oct 27 22:34:03 1997  Ken Raeburn  <raeburn@cygnus.com>

	* mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
start-sanitize-vr5400
	Added VR5400 instructions.
	(N5): New cpu-id macro.
end-sanitize-vr5400
	(WR_HILO, RD_HILO, MOD_HILO): New macros.

Mon Oct 27 22:34:03 1997  Ken Raeburn  <raeburn@cygnus.com>

	* mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
	(WR_HILO, RD_HILO, MOD_HILO): New macros.

Thu Oct 23 14:57:58 1997  Nick Clifton  <nickc@cygnus.com>

	* v850-dis.c (disassemble): Replace // with /* ... */

Wed Oct 22 17:33:21 1997  Richard Henderson  <rth@cygnus.com>

	* sparc-opc.c: Add wr & rd for v9a asr's.
	* sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
	(v9a_asr_reg_names): New variable.
	Patch from David Miller <davem@vger.rutgers.edu>.

Wed Oct 22 17:18:02 1997  Richard Henderson  <rth@cygnus.com>

	* sparc-opc.c (v9notv9a): New insn type.
	(IMPDEP): Move to the end to not conflict with edge8 et al.
	Patch from David Miller <davem@vger.rutgers.edu>.

Fri Oct 17 13:18:53 1997  Gavin Koch  <gavin@cygnus.com>

	* mips-opc.c (bnezl,beqzl): Mark these as also tx39.

Thu Oct 16 11:55:20 1997  Gavin Koch  <gavin@cygnus.com>

	* mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.

Tue Oct 14 16:10:31 1997  Nick Clifton  <nickc@cygnus.com>

	* v850-dis.c (disassemble): Use new symbol_at_address_func() field
	of disassemble_info structure to determine if an overlay address
	has a matching symbol in low memory.

	* dis-buf.c (generic_symbol_at_address): New (dummy) function for
	new symbol_at_address_func field in disassemble_info structure.

Fri Oct 10 16:44:52 1997  Nick Clifton  <nickc@cygnus.com>

	* v850-opc.c (extract_d22): Use signed arithmatic.

Tue Oct  7 23:40:43 1997  Gavin Koch  <gavin@cygnus.com>

	* mips-opc.c: Three op mult is not an ISA insn.

Tue Oct  7 23:37:21 1997  Gavin Koch  <gavin@cygnus.com>

	* mips-opc.c: Fix formatting.

Fri Oct  3 17:26:54 1997  Ian Lance Taylor  <ian@cygnus.com>

	* i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
 	than assuming that char is signed.  Explicitly sign extend 16 bit
	values, rather than assuming that short is 16 bits.
	(OP_sI, OP_J, OP_DIR): Likewise.

start-sanitize-v850e
Thu Oct  2 13:36:45 1997  Nick Clifton  <nickc@cygnus.com>

	* v850-dis.c (v850_sreg_names): Use symbolic names for higher
	system registers.

end-sanitize-v850e
Wed Oct  1 16:58:54 1997  Nick Clifton  <nickc@cygnus.com>

	* v850-opc.c: Fix typo in comment.

	* v850-dis.c (disassemble): Add test of processor type when
	determining opcodes.

Wed Oct  1 14:10:20 1997  Ian Lance Taylor  <ian@cygnus.com>

	* configure.in: Use a diversion to set enable_shared before the
	arguments are parsed.
	* configure: Rebuild.

Thu Sep 25 13:04:59 1997  Ian Lance Taylor  <ian@cygnus.com>

	* m68k-opc.c (TBL1): Use ! rather than `.
	* m68k-dis.c (print_insn_arg): Remove ` operand specifier.

Wed Sep 24 11:29:35 1997  Ian Lance Taylor  <ian@cygnus.com>

	* m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.

	* m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.

	* m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
	for mcf5200.

	* configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
	* aclocal.m4: Rebuild with new libtool.
	* configure: Rebuild.

start-sanitize-v850e
Fri Sep 19 11:45:49 1997  Andrew Cagney  <cagney@b1.cygnus.com>

	* v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.

end-sanitize-v850e
Thu Sep 18 11:21:43 1997  Doug Evans  <dje@canuck.cygnus.com>

	* sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.

Tue Sep 16 15:18:20 1997  Nick Clifton  <nickc@cygnus.com>

	* v850-opc.c (v850_opcodes): Further rearrangements.

Tue Sep 16 16:12:11 1997  Ken Raeburn  <raeburn@cygnus.com>

	* d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.

Tue Sep 16 09:48:50 1997  Nick Clifton  <nickc@cygnus.com>

	* v850-opc.c (v850_opcodes): Fields reordered to allow assembler
	parser to work.

Tue Sep 16 10:01:00 1997  Gavin Koch  <gavin@cygnus.com>

	* mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
start-sanitize-tx19
	* mips16-opc.c: Added mips16 sdbbp.
end-sanitize-tx19

Mon Sep 15 18:31:52 1997  Nick Clifton  <nickc@cygnus.com>

	* v850-opc.c: Initialise processors field of v850_opcode structure.

Wed Aug 27 21:42:39 1997  Ken Raeburn  <raeburn@cygnus.com>

	Merge changes from Martin Hunt:

	* d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.

	* d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
	(d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
	rot2h, sra2h, and srl2h to use new SHORT_A5S format.

	* d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.

	* d30v-dis.c (print_insn): First operand of d*i (delayed
	branch) instructions is relative.

	* d30v-opc.c (d30v_opcode_table): Change form for repeati.
	(d30v_operand_table): Add IMM6S3 type.
	(d30v_format_table): Change SHORT_D2. Add LONG_Db.

	* d30v-dis.c: Fix bug with ".s" and ".l" extensions
	and cmp instructions.

	* d30v-opc.c: Correct entries for repeat*, and sat*.
	Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
	types. Correct several formats.

	* d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.

	* d30v-opc.c (pre_defined_registers): Change control registers.

	* d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
	SHORT_C2.  Manual was incorrect.

	* d30v-dis.c (lookup_opcode):  Return value now indicates
	if an opcode has a short and a long form.  Used for deciding
	to append a ".s" or ".l".
	(print_insn): Append a ".s" to an instruction if it is
 	the short form and ".l" if it is a long form. Do not append
	anything if the instruction has only one possible size.

	* d30v-opc.c: Change mulx2h to require an even register.
	New form: SHORT_A2; a SHORT_A form that needs an even
	register as the first operand.

	* d30v-dis.c (print_insn_d30v): Fix problem where the last
	instruction was not being disassembled if there were an odd
	number of instructions.

	* d30v-opc.c (SHORT_M2, LONG_M2):  Two new forms.

start-sanitize-v850e
Fri Sep 12 11:43:54 1997  Nick Clifton  <nickc@cygnus.com>

	* v850-dis.c (disassemble): Improved display of register lists.

end-sanitize-v850e
Thu Sep 11 17:35:10 1997  Doug Evans  <dje@canuck.cygnus.com>

	* sparc-opc.c (sparc_opcodes): Fix assembler args to
	fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
	fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
	fandnot1s, fandnot2s.

Tue Sep  9 10:03:49 1997  Doug Evans  <dje@canuck.cygnus.com>

	* sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.

Mon Sep  8 14:06:59 1997  Doug Evans  <dje@canuck.cygnus.com>

	* cgen-asm.c (cgen_parse_address): New argument resultp.
	All callers updated.
	* m32r-asm.c (parse_h_hi16): Right shift numbers by 16.

Tue Sep  2 18:39:08 1997  Jeffrey A Law  (law@cygnus.com)

        * mn10200-dis.c (disassemble): PC relative instructions are
        relative to the next instruction, not the current instruction.

Tue Sep  2 15:41:55 1997  Nick Clifton  <nickc@cygnus.com>

	* v850-dis.c (disassemble): Only signed extend values that are not
	returned by extract functions.
	Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.

Tue Sep  2 15:39:40 1997  Nick Clifton  <nickc@cygnus.com>

	* v850-opc.c: Update comments.  Remove use of
	V850_OPERAND_ADJUST_SHORT_MEMORY.  Fix several operand patterns.

Tue Aug 26 09:42:28 1997  Nick Clifton  <nickc@cygnus.com>

	* v850-opc.c (MOVHI): Immediate parameter is unsigned.

Mon Aug 25 15:58:07 1997  Christopher Provenzano  <proven@cygnus.com>

	* configure: Rebuilt with latest devo autoconf for NT support.

Fri Aug 22 10:35:15 1997  Nick Clifton  <nickc@cygnus.com>

	* v850-dis.c (disassemble): Use curly brace syntax for register
	lists.

	* v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
	where r0 is being used as a destination register.

start-sanitize-v850e
Thu Aug 21 11:09:09 1997  Nick Clifton  <nickc@cygnus.com>

	* v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
end-sanitize-v850e

Wed Aug 20 00:43:11 1997  J"orn Rennecke <amylaar@cygnus.co.uk>

	* sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
	(sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
	(sh_table): Likewise.  Add movca.l, ocbi, ocbp, ocbwb.
	Add insns to access SGR and DBR.
	* sh-dis.c (print_insn_shx): Add SH4 floating point extensions.

Tue Aug 19 10:59:59 1997  Richard Henderson  <rth@cygnus.com>

	* alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.

start-sanitize-v850e
Mon Aug 18 11:10:03 1997  Nick Clifton  <nickc@cygnus.com>

	* v850-opc.c (v850_opcodes[]): Remove use of flag field.
	* v850-opc.c (v850_opcodes[]): Add support for reversed short load
	opcodes..

Mon Aug 18 11:08:25 1997  Nick Clifton  <nickc@cygnus.com>

	* configure (cgen_files): Add support for v850e target.
	* configure.in (cgen_files):  Add support for v850e target.

Mon Aug 18 11:08:25 1997  Nick Clifton  <nickc@cygnus.com>

	* configure (cgen_files): Add support for v850ea target.
	* configure.in (cgen_files):  Add support for v850ea target.
end-sanitize-v850e

Fri Aug 15 05:17:48 1997  Doug Evans  <dje@canuck.cygnus.com>

	* configure.in (bfd_arc_arch): Add.
	* configure: Rebuild.
	* Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
	* Makefile.in: Rebuild.
	* arc-dis.c, arc-opc.c: New files.
	* disassemble.c (ARCH_all): Define ARCH_arc.
	(disassembler): Add ARC support.

Wed Aug 13 18:52:11 1997  Nick Clifton  <nickc@cygnus.com>

start-sanitize-v850e
	* v850-dis.c (disassemble): Add support for v850EA instructions.

	* v850-opc.c (insert_i5div, extract_i5div): New Functions.
	(v850_opcodes): Add v850EA instructions.

	* v850-dis.c (disassemble): Add support for v850E instructions.

	* v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
	extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
	insert_spe, extract_spe): New Functions.
	(v850_opcodes): Add v850E instructions.
end-sanitize-v850e

	* v850-opc.c: Reorganised and re-layed out to improve readability
	and portability.

Tue Aug  5 23:09:31 1997  Ian Lance Taylor  <ian@cygnus.com>

	* configure: Rebuild with autoconf 2.12.1.

Mon Aug  4 12:02:16 1997  Ian Lance Taylor  <ian@cygnus.com>

	* aclocal.m4, configure: Rebuild with new automake patches.

Fri Aug  1 13:02:04 1997  Ian Lance Taylor  <ian@cygnus.com>

	* configure.in: Set enable_shared before AM_PROG_LIBTOOL.
	* acinclude.m4: Just include acinclude.m4 from BFD.
	* aclocal.m4, configure: Rebuild.

Thu Jul 31 21:44:42 1997  Ian Lance Taylor  <ian@cygnus.com>

	* Makefile.am: New file, based on old Makefile.in.
	* acconfig.h: New file.
	* acinclude.m4: New file.
	* stamp-h.in: New file.
	* configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
	Removed shared library handling; now handled by libtool.  Replace
	AC_CONFIG_HEADER with AM_CONFIG_HEADER.  Call AM_MAINTAINER_MODE,
	AM_CYGWIN32, and AM_EXEEXT.  Replace AC_PROG_INSTALL with
	AM_PROG_INSTALL.  Change all .o files to .lo.  Remove stamp-h
	handling in AC_OUTPUT.
	* dep-in.sed: Change .o to .lo.
	* Makefile.in: Now built with automake.
	* aclocal.m4: Now built with aclocal.
	* config.in, configure: Rebuild.

Mon Jul 28 21:52:24 1997  Jeffrey A Law  (law@cygnus.com)

	* mips-opc.c: Fix typo/thinko in "eret" instruction.

start-sanitize-r5900
Mon Jul 28 22:07:14 1997  Andrew Cagney  <cagney@b1.cygnus.com>

	* mips-opc.c: Fix coding of mtsa.

end-sanitize-r5900
Thu Jul 24 13:03:26 1997  Doug Evans  <dje@canuck.cygnus.com>

	* sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
	Make array const.
	* sparc-dis.c (sorted_opcodes): New static local.
	(struct opcode_hash): `opcode' is pointer to const element.
	(build_hash): First arg is now table of sorted pointers.
	(print_insn_sparc): Sort opcodes by sorting table of pointers.
	(compare_opcodes): Update.

Tue Jul 15 12:05:23 1997  Doug Evans  <dje@canuck.cygnus.com>

	* cgen-opc.c: #include <ctype.h>.
	(hash_keyword_name): New arg `case_sensitive_p'.  Callers updated.
	Handle case insensitive hashing.
	(hash_keyword_value): Change type of `value' to unsigned int.

Thu Jul 10 12:56:10 1997  Jeffrey A Law  (law@cygnus.com)

	* mips-opc.c (mips_builtin_opcodes): If an insn uses single
	precision FP, mark it as such.  Likewise for double precision
	FP.  Mark ISA1 insns.  Consolidate duplicate opcodes where
	possible.
start-sanitize-r5900
	(mips_builtin_opcodes): Remove non-existant r5900 instructions
end-sanitize-r5900

start-sanitize-r5900
Thu Jun 26 16:20:27 1997  Jeffrey A Law  (law@cygnus.com)

	* mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
	"pexew" as synonyms for "pintoh", "pexoh", "pexow".

end-sanitize-r5900
Wed Jun 25 15:25:57 1997  Felix Lee  <flee@cirdan.cygnus.com>

	* ppc-opc.c (extract_nsi): make unsigned expression signed before
 	negating it.
	(UNUSED): remove one level of parens, so MSVC doesn't choke on
 	nesting depth when all the macros are expanded.

Tue Jun 17 17:02:17 1997  Ian Lance Taylor  <ian@cygnus.com>

	* sparc-opc.c: The fcmp v9a instructions take an integer register
	as a destination, not a floating point register.  From Christian
	Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.

Mon Jun 16 14:13:18 1997  Ian Lance Taylor  <ian@cygnus.com>

	* m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
	syntax.  From Roman Hodek
	<rnhodek@faui22c.informatik.uni-erlangen.de>.

	* i386-dis.c (twobyte_has_modrm): Fix pand.

Mon Jun 16 14:08:38 1997  Michael Taylor  <mbt@mit.edu>

	* i386-dis.c (dis386_twobyte): Fix pand and pandn.

Tue Jun 10 11:26:47 1997  H.J. Lu  <hjl@gnu.ai.mit.edu>

	* arm-dis.c: Add prototypes for arm_decode_shift and
	print_insn_arm.

Mon Jun  2 11:39:04 1997  Gavin Koch  <gavin@cygnus.com>

	* mips-opc.c: Add r3900 insns.

Tue May 27 15:55:44 1997  Ian Lance Taylor  <ian@cygnus.com>

	* sh-dis.c (print_insn_shx): Change relmask to bfd_vma.  Don't
	print delay slot instructions on the same line.  When using a PC
	relative load, add a comment with the value being loaded if it can
	be obtained.

Tue May 27 11:02:08 1997  Alan Modra  <alan@spri.levels.unisa.edu.au>

	* i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
	to pushS/popS for segment regs and byte constant so that
	pushw/popw printed when in 16 bit data mode.

	* i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
	print cbtw, cwtd in 16 bit data mode.
	* i386-dis.c (putop): extra case W to support above.

	* i386-dis.c (print_insn_x86): print addr32 prefix when given
	address size prefix in 16 bit address mode.

Fri May 23 16:47:23 1997  Ian Lance Taylor  <ian@cygnus.com>

	* sh-dis.c: Reindent.  Rename local variable fprintf to
	fprintf_fn.

Thu May 22 14:06:02 1997  Doug Evans  <dje@canuck.cygnus.com>

	* m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.

Tue May 20 11:26:27 1997  Gavin Koch  <gavin@cygnus.com>

	* mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
	  field membership.
	* mips16-opc.c (mip16_opcodes): same.

Mon May 12 15:10:53 1997  Jim Wilson  <wilson@cygnus.com>

	* m68k-opc.c (moveb): Change $d to %d.

Mon May  5 14:28:41 1997  Ian Lance Taylor  <ian@cygnus.com>

	* i386-dis.c: (dis386_twobyte): Add MMX instructions.
	(twobyte_has_modrm): Likewise.
	(grps): Likewise.
	(OP_MMX, OP_EM, OP_MS): New static functions.

	* i386-dis.c: Revert patch of April 4.  The output now matches
	what gcc generates.

Fri May  2 12:48:37 1997  Doug Evans  <dje@canuck.cygnus.com>

	* m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
	of $simm16.

Thu May  1 15:34:15 1997  Doug Evans  <dje@canuck.cygnus.com>

	* m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.

Tue Apr 15 12:40:08 1997  Ian Lance Taylor  <ian@cygnus.com>

	* Makefile.in (install): Depend upon installdirs.
	(installdirs): New target.

Mon Apr 14 12:13:51 1997  Ian Lance Taylor  <ian@cygnus.com>

	From Thomas Graichen <graichen@rzpd.de>:
	* configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
	* configure: Rebuild.

Sun Apr 13 17:50:41 1997  Doug Evans  <dje@canuck.cygnus.com>

	* cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
	Delete string{,s}.h support.

Thu Apr 10 14:44:56 1997  Doug Evans  <dje@canuck.cygnus.com>

	* cgen-asm.c (cgen_parse_operand_fn): New global.
	(cgen_parse_{{,un}signed_integer,address}): Update call to
	cgen_parse_operand_fn.
	(cgen_init_parse_operand): New function.
	* m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
	from cgen_asm_init_parse.
	(m32r_cgen_assemble_insn): New operand `errmsg'.
	Delete call to as_bad, return error message to caller.
	(m32r_cgen_asm_hash_keywords): #if 0 out.

Wed Apr  9 12:05:25 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

	* m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
	not data register.
	[case 'J']: Fix typo in register name.

Mon Apr  7 16:48:22 1997  Ian Lance Taylor  <ian@cygnus.com>

	* configure.in: Substitute SHLIB_LIBS.
	* configure: Rebuild.
	* Makefile.in (SHLIB_LIBS): New variable.
	($(SHLIB)): Use $(SHLIB_LIBS).

Mon Apr  7 11:45:44 1997  Doug Evans  <dje@canuck.cygnus.com>

	* cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.

	* cgen-opc.c (hash_keyword_name): Improve algorithm.

	* disassemble.c (disassembler): Handle m32r.

Fri Apr  4 12:29:38 1997  Doug Evans  <dje@canuck.cygnus.com>

	* m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
	* cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
	* Makefile.in (CFILES): Add them.
	(ALL_MACHINES): Add them.
	(dependencies): Regenerate.
	* configure.in (cgen_files): New variable.
	(bfd_m32r_arch): Add entry.
	* configure: Regenerate.

Fri Apr  4 14:04:16 1997  Ian Lance Taylor  <ian@cygnus.com>

	* configure.in: Correct file names for bfd_mn10[23]00_arch.
	* configure: Rebuild.

	* Makefile.in: Rebuild dependencies.

	* d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".

	* i386-dis.c (float_reg): Swap fsubrp and fsubp.  Swap fdivrp and
	fdivp.

Thu Apr  3 13:22:45 1997  Ian Lance Taylor  <ian@cygnus.com>

	* Branched binutils 2.8.

Wed Apr  2 12:23:53 1997  Ian Lance Taylor  <ian@cygnus.com>

	* m10200-dis.c: Rename from mn10200-dis.c.
	* m10200-opc.c: Rename from mn10200-opc.c.
	* m10300-dis.c: Rename from mn10300-dis.c
	* m10300-opc.c: Rename from mn10300-opc.c.
	* Makefile.in: Update accordingly.

	* mips16-opc.c: Add mul and dmul macros.

Tue Apr  1 16:27:45 1997  Klaus Kaempf  <kkaempf@progis.de>

	* makefile.vms: Update CFLAGS, add clean target.

Fri Mar 28 12:10:09 1997  Ian Lance Taylor  <ian@cygnus.com>

	* mips-opc.c: Add "wait".  From Ralf Baechle
	<ralf@gnu.ai.mit.edu>.

	* configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
	* configure, config.in: Rebuild.
	* sysdep.h: Include <stdlib.h> if it exists.
	* sparc-dis.c: Include <stdio.h> and "sysdep.h".  Don't include
	<string.h>.
	* Makefile.in: Rebuild dependencies.

Thu Mar 27 14:24:43 1997  Ian Lance Taylor  <ian@cygnus.com>

	* ppc-opc.c: Add PPC 403 instructions and extended opcodes.  From
	Andrew Bray <andy@madhouse.demon.co.uk>.

	* mips-opc.c: Add cast when setting mips_opcodes.

Tue Mar 25 23:04:00 1997  Stu Grossman  (grossman@critters.cygnus.com)

	* v850-dis.c (disassemble):  Fix sign extension problem.
	* v850-opc.c (extract_d*):  Fix sign extension problems to make
	disassembly calculate branch offsets correctly.

Mon Mar 24 13:22:13 1997  Ian Lance Taylor  <ian@cygnus.com>

	* sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.

	* mips-opc.c: Add dctr and dctw.

Sun Mar 23 18:08:10 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>

	* d30v-dis.c (print_insn): Change the way signed constants
	are displayed.

Fri Mar 21 14:37:52 1997  Ian Lance Taylor  <ian@cygnus.com>

	* Makefile.in (BFD_H): New variable.
	(HFILES): New variable.
	(CFILES): Add all C files.
	(.dep, .dep1, dep.sed, dep, dep-in): New targets.
	Delete old dependencies, and build new ones.
	* dep-in.sed: New file.

Thu Mar 20 19:03:30 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>

	* m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.

start-sanitize-coldfire
Wed Mar 19 06:53:58 1997  J.T. Conklin  <jtc@rtl.cygnus.com>

	* m68k-opc.c (m68k_opcodes): Provide coldfire division module
 	instructions.

end-sanitize-coldfire
Tue Mar 18 14:17:03 1997  Jeffrey A Law  (law@cygnus.com)

	* mn10200-opc.c: Change "trap" to "syscall".
	* mn10300-opc.c: Add new "syscall" instruction.

Mon Mar 17 08:48:03 1997  J.T. Conklin  <jtc@beauty.cygnus.com>

	* m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
 	mulul insns on the coldfire.

Sat Mar 15 17:13:05 1997  Ian Lance Taylor  <ian@cygnus.com>

	* arm-dis.c (print_insn_arm): Don't print instruction bytes.
	(print_insn_big_arm): Set bytes_per_chunk and display_endian.
	(print_insn_little_arm): Likewise.

Fri Mar 14 15:08:59 1997  Ian Lance Taylor  <ian@cygnus.com>

	Based on patches from H.J. Lu <hjl@lucon.org>:
	* i386-dis.c (fetch_data): Add prototype.
	* m68k-dis.c (fetch_data): Add prototype.
	(dummy_print_address): Add prototype.  Make static.
	* ppc-opc.c (valid_bo): Add prototype.
	* sparc-dis.c (build_hash_table): Add prototype.
	(is_delayed_branch, compute_arch_mask): Add prototypes.
	(print_insn_sparc): Make several local variables const.
	(compare_opcodes): Change arguments to const PTR.  Add prototype.
	* sparc-opc.c (arg): Change name field to be const.
	(lookup_name, lookup_value): Add prototypes.  Change table and
	name parameters to be const.
	(sparc_encode_asi): Change name parameter to be const.
	(sparc_encode_membar, sparc_encode_prefetch): Likewise.
	(sparc_encode_sparclet_cpreg): Likewise.
	(sparc_decode_asi): Change return type to be const.
	(sparc_decode_membar, sparc_decode_prefetch): Likewise.
	(sparc_decode_sparclet_cpreg): Likewise.

Fri Mar  7 10:51:49 1997  Ian Lance Taylor  <ian@cygnus.com>

	* Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
	Solaris doesn't like the combined options, and the -f is
	unnecessary.
	(stamp-tshlink, install): Likewise.

Thu Mar  6 16:51:11 1997  Jeffrey A Law  (law@cygnus.com)

	* mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
	as relaxable.

Tue Mar  4 06:10:36 1997  J.T. Conklin  <jtc@cygnus.com>

	* m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.

Mon Mar  3 07:45:20 1997  J.T. Conklin  <jtc@cygnus.com>

	* m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
 	the mc68000.

Thu Feb 27 14:04:32 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>

	* m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.

start-sanitize-tic80
Thu Feb 27 11:36:41 1997  Michael Meissner  <meissner@cygnus.com>

	* tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.

Wed Feb 26 15:34:48 1997  Michael Meissner  <meissner@cygnus.com>

	* tic80-opc.c (tic80_predefined_symbols): Define r25 properly.

end-sanitize-tic80
Wed Feb 26 13:38:30 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

	* m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
	floatformat_to_double to make portable.
	(print_insn_arg): Use NEXTEXTEND macro when extracting extended
	precision float.

Mon Feb 24 19:26:12 1997  Dawn Perchik  <dawn@cygnus.com>

	* mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
	and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.

Mon Feb 24 15:19:01 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>

	* d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
	d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.

start-sanitize-tic80
Mon Feb 24 14:33:26 1997  Fred Fish  <fnf@cygnus.com>

	* tic80-opc.c (LSI_SCALED): Renamed from this ...
	(OFF_SL_BR_SCALED): ... to this, and added the flag
	TIC80_OPERAND_BASEREL to the flags word.
	(tic80_opcodes): Replace all occurances of LSI_SCALED with
	OFF_SL_BR_SCALED.

end-sanitize-tic80
Sat Feb 22 21:25:00 1997  Dawn Perchik  <dawn@cygnus.com>

	* mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
	Change mips_opcodes from const array to a pointer,
	and change bfd_mips_num_opcodes from const int to int,
	so that we can increase the size of the mips opcodes table
	dynamically.

start-sanitize-tic80
Sat Feb 22 21:03:47 1997  Fred Fish  <fnf@cygnus.com>

	* tic80-opc.c (tic80_predefined_symbols): Revert change to
	store BITNUM values in the table in one's complement form
	to match behavior when assembler is given a raw numeric
	value for a BITNUM operand.
	* tic80-dis.c (print_operand_bitnum): Ditto.

end-sanitize-tic80
Fri Feb 21 16:31:18 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>

	* d30v-opc.c: Removed references to FLAG_X.

Wed Feb 19 14:51:20 1997  Ian Lance Taylor  <ian@cygnus.com>

	* Makefile.in: Add dependencies on ../bfd/bfd.h as required.

Tue Feb 18 17:43:43 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>

	* Makefile.in: Added d30v object files.
	* configure: (bfd_d30v_arch) Rebuilt.
	* configure.in: (bfd_d30v_arch) Added new case.
	* d30v-dis.c: New file.
	* d30v-opc.c: New file.
	* disassemble.c (disassembler) Add entry for d30v.

start-sanitize-tic80
Tue Feb 18 16:32:08 1997  Fred Fish  <fnf@cygnus.com>

	* tic80-opc.c (tic80_predefined_symbols): Add symbolic
	representations for the floating point BITNUM values.

Fri Feb 14 12:14:05 1997  Fred Fish  <fnf@cygnus.com>

	* tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
	in the table in one's complement form, as they appear in the
	actual instruction.
	(tic80_symbol_to_value): Use macros to access predefined
	symbol fields.
	(tic80_value_to_symbol): Ditto.
	(tic80_next_predefined_symbol): New function.
	* tic80-dis.c (print_operand_bitnum): Remove code that did
	one's complement for BITNUM values.

end-sanitize-tic80
start-sanitize-r5900
Fri Feb 14 13:56:51 1997  Gavin Koch  <gavin@cygnus.com>

	* mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4

end-sanitize-r5900
Thu Feb 13 21:56:51 1997  Klaus Kaempf  <kkaempf@progis.de>

	* makefile.vms: Remove 8 bit characters.  Update to latest
	gcc release.

Thu Feb 13 20:41:22 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>

	* m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.

Thu Feb 13 16:30:02 1997  Jeffrey A Law  (law@cygnus.com)

	* mn10200-opc.c (IMM16_PCREL): This is a signed operand.
	(IMM24_PCREL): Likewise.

Thu Feb 13 13:28:43 1997  Ian Lance Taylor  <ian@cygnus.com>

	* mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
	address for an extended PC relative instruction that is not a
	branch.

Wed Feb 12 12:27:40 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

	* m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
	bytes_per_line.

start-sanitize-tic80
Tue Feb 11 16:36:31 1997  Fred Fish  <fnf@cygnus.com>

	* tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
	(tic80_opcodes): Sort entries so that long immediate forms
	come after short immediate forms, making it easier for
	assembler to select the right one for a given operand.

end-sanitize-tic80
Tue Feb 11 15:26:47 1997  Ian Lance Taylor  <ian@cygnus.com>

	* mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
	display_endian.
	(print_insn_mips16): Likewise.

start-sanitize-r5900
Fri Feb  7 11:12:44 1997  Gavin Koch  <gavin@cygnus.com>

        * mips-opc.c: add r5900.

end-sanitize-r5900
start-sanitize-tic80
Mon Feb 10 10:12:41 1997  Fred Fish  <fnf@cygnus.com>

	* tic80-opc.c (tic80_symbol_to_value): Changed to accept
	a symbol class that restricts translation to just that
	class (general register, condition code, etc).

Thu Feb  6 17:34:09 1997  Fred Fish  <fnf@cygnus.com>

	* tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
	and REG_DEST_E for register operands that have to be
	an even numbered register.  Add REG_FPA for operands that
	are one of the floating point accumulator registers.
	Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
	(tic80_opcodes): Change entries that need even numbered
	register operands to use the new operand table entries.
	Add "or" entries that are identical to "or.tt" entries.

end-sanitize-tic80
Wed Feb  5 11:12:44 1997  Ian Lance Taylor  <ian@cygnus.com>

	* mips16-opc.c: Add new cases of exit instruction for
	disassembler.
	* mips-dis.c (print_mips16_insn_arg): Display floating point
	registers in operands of exit instruction.  Print `$' before
	register names in operands of entry and exit instructions.

start-sanitize-tic80
Thu Jan 30 14:09:03 1997  Fred Fish  <fnf@cygnus.com>

	* tic80-opc.c (tic80_predefined_symbols): Table of name/value
	pairs for all predefined symbols recognized by the assembler.
	Also used by the disassembling routines.
	(tic80_symbol_to_value): New function.
	(tic80_value_to_symbol): New function.
	* tic80-dis.c (print_operand_control_register,
 	print_operand_condition_code, print_operand_bitnum):
	Remove private tables and use tic80_value_to_symbol function.

end-sanitize-tic80
Thu Jan 30 11:30:45 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>

	* d10v-dis.c (print_operand): Change address printing
	to correctly handle PC wrapping.  Fixes PR11490.

Wed Jan 29 09:39:17 1997  Jeffrey A Law  (law@cygnus.com)

	* mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
	branches relaxable.

Tue Jan 28 15:57:34 1997  Ian Lance Taylor  <ian@cygnus.com>

	* mips-dis.c (print_insn_mips16): Set insn_info information.
	(print_mips16_insn_arg): Likewise.

	* mips-dis.c (print_insn_mips16): Better handling of an extend
 	opcode followed by an instruction which can not be extended.

Fri Jan 24 12:08:21 1997  J.T. Conklin  <jtc@cygnus.com>

	* m68k-opc.c (m68k_opcodes): Changed operand specifier for the
 	coldfire moveb instruction to not allow an address register as
 	destination.  Although the documentation does not indicate that
	this is invalid, experiments uncovered unexpected behavior.
	Added a comment explaining the situation.  Thanks to Andreas
	Schwab for pointing this out to me.

start-sanitize-tic80
Wed Jan 22 20:13:51 1997  Fred Fish  <fnf@cygnus.com>

	* tic80-opc.c (tic80_opcodes): Expand comment to note that the
 	entries are presorted so that entries with the same mnemonic are
	adjacent to each other in the table.  Sort the entries for each
	instruction so that this is true.

end-sanitize-tic80
Mon Jan 20 12:48:57 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

	* m68k-dis.c: Include <libiberty.h>.
	(print_insn_m68k): Sort the opcode table on the most significant
	nibble of the opcode.

start-sanitize-tic80
Sat Jan 18 15:15:05 1997  Fred Fish  <fnf@cygnus.com>

	* tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
	"vsub", "vst", "xnor", and "xor" instructions.
	(V_a1): Renamed from V_a, msb of accumulator reg number.
	(V_a0): Add macro, lsb of accumulator reg number.

Fri Jan 17 18:24:31 1997  Fred Fish  <fnf@cygnus.com>

	* tic80-dis.c (print_insn_tic80): Broke excessively long
	function up into several smaller ones and arranged for
	the instruction printing function to be callable recursively
	to print vector instructions that have both a load and a
	math instruction packed into a single opcode.
	* tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
	to explain why it comes after the other vector opcodes.

end-sanitize-tic80
Fri Jan 17 16:19:15 1997  J.T. Conklin  <jtc@beauty.cygnus.com>

	* m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
	move insns to handle immediate operands.

Thu Jan 17 16:19:00 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

	* m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
	fix operand mask in the "moveml" entries for the coldfire.

start-sanitize-tic80
Thu Jan 16 20:54:40 1997  Fred Fish  <fnf@cygnus.com>

	* tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
	New macros for building vector instruction opcodes.
	(tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
	FMT_LI, which were unused.  The field is now a flags field.
	Remove some opcodes that are possible, but illegal, such
	as long immediate instructions with doubles for immediate
	values.  Add "vadd" and "vld" instructions.

Wed Jan 15 18:59:51 1997  Fred Fish  <fnf@cygnus.com>

	* tic80-opc.c (tic80_operands): Reorder some table entries to make
	the order more logical.  Move the shift alias instructions ("rotl",
	"shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
 	interspersed with the regular sr.x and sl.x instructions.  Add
	and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
 	"sub", "subu", "swcr", and "trap".

Tue Jan 14 19:42:50 1997  Fred Fish  <fnf@cygnus.com>

	* tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
	(OFF_SL_PC): Renamed from OFF_SL.
	(OFF_SS_BR): New operand type for base relative operand.
	(OFF_SL_BR): New operand type for base relative operand.
	(REG_BASE): New operand type for base register operand.
	(tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
	"frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
	"ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
	instructions.
	* tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
 	10 char field, padded with spaces on rhs, rather than a string
 	followed by a tab.  Use renamed TIC80_OPERAND_PCREL flag bit rather
 	than old TIC80_OPERAND_RELATIVE.  Add support for new
	TIC80_OPERAND_BASEREL flag bit.

Mon Jan 13 15:58:56 1997  Fred Fish  <fnf@cygnus.com>

	* tic80-dis.c (print_insn_tic80): Print floating point operands
	as floats.
	* tic80-opc.c (SPFI): Add single precision floating point
	immediate operand type.
	(ROTATE): Add rotate operand type for shifts.
	(ENDMASK): Add for shifts.
	(n): Macro for the 'n' bit.
	(i): Macro for the 'i' bit.
	(PD): Macro for the 'PD' field.
	(P2): Macro for the 'P2' field.
	(P1): Macro for the 'P1' field.
	(tic80_opcodes): Add entries for "exts", "extu", "fadd",
	"fcmp", and "fdiv".

end-sanitize-tic80
Mon Jan  6 15:06:55 1997  Jeffrey A Law  (law@cygnus.com)

	* mn10200-dis.c (disassemble): Mask off unwanted bits after
	adding in current address for pc-relative operands.

start-sanitize-tic80
Mon Jan  6 10:56:25 1997  Fred Fish  <fnf@cygnus.com>

	* tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
	(print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
	* tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
	changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
	(SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
	REG_BASE_M_SI, REG_BASE_M_LI respectively.
	(REG_SCALED, LSI_SCALED): New operand types.
	(E): New macro for 'E' bit at bit 27.
	(tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
	opcodes, including the various size flavors (b,h,w,d) for
	the direct load and store instructions.

Sun Jan  5 12:18:14 1997  Fred Fish  <fnf@cygnus.com>

	* tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
 	in an instruction.
	* tic80-dis.c (print_insn_tic80): Change comma and paren handling.
  	Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
	* tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
	(F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New	bit-twiddlers.
	(MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
	masks with "MASK_* & ~M_*" to get the M bit reset.
	(tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.

Sat Jan  4 19:05:05 1997  Fred Fish  <fnf@cygnus.com>

	* tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
	correctly.  Add support for printing TIC80_OPERAND_BITNUM and
	TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
	form.
	* tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
	CC, SICR, and LICR table entries.
	(tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
	"bcnd", and "brcr" opcodes.

end-sanitize-tic80
Fri Jan  3 18:32:11 1997  Fred Fish  <fnf@cygnus.com>

	* ppc-opc.c (powerpc_operands): Make comment match the
	actual fields (no shift field).
	* sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
start-sanitize-tic80
	* tic80-dis.c (print_insn_tic80): Replace abort stub with a
	partial implementation, work in progress.
	* tic80-opc.c (tic80_operands): Begin construction operands table.
	(tic80_opcodes): Continue populating opcodes table and start
	filling in the operand indices.
	(tic80_num_opcodes): Add this.
end-sanitize-tic80

Fri Jan  3 12:13:52 1997  Ian Lance Taylor  <ian@cygnus.com>

	* m68k-opc.c: Add #B case for moveq.

Thu Jan  2 12:14:29 1997  Jeffrey A Law  (law@cygnus.com)

	* mn10300-dis.c (disassemble): Make sure all variables are initialized
	before they are used.

Tue Dec 31 12:20:38 1996  Jeffrey A Law  (law@cygnus.com)

	* v850-opc.c (v850_opcodes): Put curly-braces around operands
	for "breakpoint" instruction.

Tue Dec 31 15:38:13 1996  Ian Lance Taylor  <ian@cygnus.com>

	* Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
	(dep): Use ALL_CFLAGS rather than CFLAGS.

Tue Dec 31 15:09:16 1996  Michael Meissner  <meissner@tiktok.cygnus.com>

	* v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
	flag.

Mon Dec 30 17:02:11 1996  Fred Fish  <fnf@cygnus.com>

	* Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
start-sanitize-tic80
	(tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
end-sanitize-tic80

Mon Dec 30 11:38:01 1996  Ian Lance Taylor  <ian@cygnus.com>

	* mips16-opc.c: Add "abs".

start-sanitize-tic80
Sun Dec 29 10:58:22 1996  Fred Fish  <fnf@cygnus.com>

	* Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
	* disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
	(disassembler): Add bfd_arch_tic80 support to set disassemble
 	to print_insn_tic80.
	* tic80-dis.c (print_insn_tic80): Add stub.

Fri Dec 27 22:30:57 1996  Fred Fish  <fnf@cygnus.com>

	* configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
	* configure: Regenerate with autoconf.
	* tic80-dis.c: Add file.
	* tic80-opc.c: Add file.

end-sanitize-tic80
Fri Dec 20 14:30:19 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>

	* d10v-opc.c (pre_defined_registers):  Add cr[0-15], dpc, dpsw, link.

Mon Dec 16 13:00:15 1996  Jeffrey A Law  (law@cygnus.com)

	* mn10200-opc.c (mn10200_operands): Add SIMM16N.
	(mn10200_opcodes): Use it for some logicals and btst insns.
	Add "break" and "trap" instructions.

	* mn10300-opc.c (mn10300_opcodes): Add "break" instruction.

	* mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".

Sat Dec 14 22:36:20 1996  Ian Lance Taylor  <ian@cygnus.com>

	* mips-dis.c (print_mips16_insn_arg): The base address of a PC
	relative load or add now depends upon whether the instruction is
	in a delay slot.

Wed Dec 11 09:23:46 1996  Jeffrey A Law  (law@cygnus.com)

	* mn10200-dis.c: Finish writing disassembler.
	* mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
	Fix mask for "jmp (an)".

	* mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
	handle endianness issues for mn10300.

	* mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".

Tue Dec 10 12:08:05 1996  Jeffrey A Law  (law@cygnus.com)

	* mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
	instruction.  Fix opcode field for "movb (imm24),dn".

	* mn10200-opc.c (mn10200_operands): Fix insertion position
	for DI operand.

Mon Dec  9 16:42:43 1996  Jeffrey A Law  (law@cygnus.com)

	* mn10200-opc.c: Create mn10200 opcode table.
	* mn10200-dis.c: Flesh out mn10200 disassembler.  Not ready,
	but moving along nicely.

Sun Dec  8 04:28:31 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* Makefile.in (ALL_MACHINES):  Add mips16-opc.o.

Fri Dec  6 16:47:40 1996  J.T. Conklin  <jtc@rhino.cygnus.com>

	* m68k-opc.c (m68k_opcodes): Revert change to use < and >
	specifiers for fmovem* instructions.

Fri Dec  6 14:48:09 1996  Jeffrey A Law  (law@cygnus.com)

	* mn10300-dis.c (disassemble): Remove '$' register prefixing.

Fri Dec  6 17:34:39 1996  Ian Lance Taylor  <ian@cygnus.com>

	* mips16-opc.c: Change opcode for entry/exit to avoid conflicting
	with dsrl.

Fri Dec  6 14:48:09 1996  Jeffrey A Law  (law@cygnus.com)

	* mn10300-opc.c: Add some comments explaining the various
 	operands and such.

	* mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.

Thu Dec  5 12:09:48 1996  J.T. Conklin  <jtc@rtl.cygnus.com>

	* m68k-dis.c (print_insn_arg): Handle new < and > operand
	specifiers.

	* m68k-opc.c (m68k_opcodes): Simplify table by using < and >
	operand specifiers in fmovm* instructions.

Wed Dec  4 14:52:18 1996  Ian Lance Taylor  <ian@cygnus.com>

	* ppc-opc.c (insert_li): Give an error if the offset has the two
	least significant bits set.

Wed Nov 27 13:09:01 1996  Ian Lance Taylor  <ian@cygnus.com>

	* mips-dis.c (print_insn_mips16): Separate the instruction from
	the arguments with a tab, not a space.

Tue Nov 26 13:24:17 1996  Jeffrey A Law  (law@cygnus.com)

	* mn10300-dis.c (disasemble): Finish conversion to '$' as
	register prefix.

	* mn10300-opc.c (mn10300_opcodes): Fix mask field for
	mov am,(imm32,sp).

Tue Nov 26 10:53:21 1996  Ian Lance Taylor  <ian@cygnus.com>

	* configure: Rebuild with autoconf 2.12.

	Add support for mips16 (16 bit MIPS implementation):
	* mips16-opc.c: New file.
	* mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
	(mips16_reg_names): New static array.
	(print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
	after seeing a 16 bit symbol.
	(print_insn_little_mips): Likewise.
	(print_insn_mips16): New static function.
	(print_mips16_insn_arg): New static function.
	* mips-opc.c: Add jalx instruction.
	* Makefile.in (mips16-opc.o): New target.
	* configure.in: Use mips16-opc.o for bfd_mips_arch.
	* configure: Rebuild.

Mon Nov 25 16:15:17 1996  J.T. Conklin  <jtc@cygnus.com>

	* m68k-opc.c (m68k_opcodes): Simplify table by using < and >
 	operand specifiers in *save, *restore and movem* instructions.

	* m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
 	the coldfire.

	* m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
 	register operands for immediate arithmetic, not, neg, negx, and
	set according to condition instructions.

	* m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
 	specifier of the effective-address operand in immediate forms of
 	arithmetic instructions.  The specifier for the immediate operand
 	notes how and where the constant will be stored.

Mon Nov 25 11:17:01 1996  Jeffrey A Law  (law@cygnus.com)

	* mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
	opcode.

	* mn10300-dis.c (disassemble): Use '$' instead of '%' for
	register prefix.

	* mn10300-dis.c (disassemble): Prefix registers with '%'.

Wed Nov 20 10:37:13 1996  Jeffrey A Law  (law@cygnus.com)

	* mn10300-dis.c (disassemble): Handle register lists.

	* mn10300-opc.c: Fix handling of register list operand for
	"call", "ret", and "rets" instructions.

	* mn10300-dis.c (disassemble): Print PC-relative and memory
	addresses symbolically if possible.
	* mn10300-opc.c: Distinguish between absolute memory addresses,
	pc-relative offsets & random immediates.

	* mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
	in 7 byte insns.
	(disassemble): Handle SPLIT and EXTENDED operands.

Tue Nov 19 13:33:01 1996  Jeffrey A Law  (law@cygnus.com)

	* mn10300-dis.c: Rough cut at printing some operands.

	* mn10300-dis.c: Start working on disassembler support.
	* mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.

	* mn10300-opc.c (mn10300_operands): Add "REGS" for a register
	list.
	(mn10300_opcodes): Use REGS for register list in "movm" instructions.

Mon Nov 18 15:20:35 1996  Michael Meissner  <meissner@tiktok.cygnus.com>

	* d10v-opc.c (d10v_opcodes): Add3 sets the carry.

Fri Nov 15 13:43:19 1996  Jeffrey A Law  (law@cygnus.com)

	* mn10300-opc.c (mn10300_opcodes): Demand parens around
	register argument is calls and jmp instructions.

Thu Nov  7 00:26:05 1996  Jeffrey A Law  (law@cygnus.com)

	* mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
	getx operand.  Fix opcode for mulqu imm,dn.

Wed Nov  6 13:42:32 1996  Jeffrey A Law  (law@cygnus.com)

	* mn10300-opc.c (mn10300_operands): Hijack "bits" field
	in MN10300_OPERAND_SPLIT operands for how many bits
	appear in the basic insn word.  Add IMM32_HIGH24,
	IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
	(mn10300_opcodes): Use new operands as needed.

	* mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
	for bset, bclr, btst instructions.
	(mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.

	* mn10300-opc.c (mn10300_operands): Remove many redundant
	operands.  Update opcode table as appropriate.
	(IMM32): Add MN10300_OPERAND_SPLIT flag.
	(mn10300_opcodes): Fix single bit error in mov imm32,dn insn.

Tue Nov  5 13:26:58 1996  Jeffrey A Law  (law@cygnus.com)

	* mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
	operands (for indexed load/stores).  Fix bitpos for DI
	operand.  Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
	few instructions that insert immediates/displacements in the
	middle of the instruction.  Add IMM8E for 8 bit immediate in
	the extended part of an instruction.
	(mn10300_operands): Use new opcodes as appropriate.

Tue Nov  5 10:30:51 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>

	* d10v-opc.c (d10v_opcodes): Declare the trap instruction
 	sequential so the assembler never parallelizes it with
	other instructions.

Mon Nov  4 12:50:40 1996  Jeffrey A Law  (law@cygnus.com)

	* mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
	a data/address register that appears in register field 0
	and register field 1.
	(mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN

Fri Nov  1 10:29:11 1996  Richard Henderson  <rth@tamu.edu>

	* alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
	standard disassembly.

	* alpha-opc.c (alpha_operands): Rearrange flags slot.
	(alpha_opcodes): Add new BWX, CIX, and MAX instructions.
	Recategorize PALcode instructions.

Wed Oct 30 16:46:58 1996  Jeffrey A Law  (law@cygnus.com)

	* v850-opc.c (v850_opcodes): Add relaxing "jbr".

Tue Oct 29 16:30:28 1996  Ian Lance Taylor  <ian@cygnus.com>

	* mips-dis.c (_print_insn_mips): Don't print a trailing tab if
	there are no operand types.

Tue Oct 29 12:22:21 1996  Jeffrey A Law  (law@cygnus.com)

	* v850-opc.c (D9_RELAX): Renamed from D9, all references
	changed.
	(v850_operands): Make sure D22 immediately follows D9_RELAX.

Fri Oct 25 12:12:53 1996  Ian Lance Taylor  <ian@cygnus.com>

	* i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.

Thu Oct 24 17:53:52 1996  Jeffrey A Law  (law@cygnus.com)

	* v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
	and sst.w instructions.

	* v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
	"bCC"instructions).

Thu Oct 24 17:21:20 1996  Ian Lance Taylor  <ian@cygnus.com>

	* mips-dis.c (_print_insn_mips): Use a tab between the instruction
	and the arguments.

Tue Oct 22 23:32:56 1996  Ian Lance Taylor  <ian@cygnus.com>

	* ppc-opc.c (PPCPWR2): Define.
	(powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
	it.

Fri Oct 11 16:03:49 1996  Jeffrey A Law  (law@cygnus.com)

	* mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
	field for movhu instruction.

	* v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
	cast value to "long" not "signed long" to keep hpux10
	compiler quiet.

Thu Oct 10 10:25:58 1996  Jeffrey A Law  (law@cygnus.com)

	* mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
	for mov (abs16),DN.

	* mn10300-opc.c (FMT*): Remove definitions.

	* mn10300-opc.c (mn10300_opcodes): Fix destination register
	for shift-by-register opcodes.

	* mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
	into [AD][MN][01] for encoding the position of the register
	in the opcode.

Wed Oct  9 11:19:26 1996  Jeffrey A Law  (law@cygnus.com)

	* mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
	"putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".

Tue Oct  8 11:55:35 1996  Jeffrey A Law  (law@cygnus.com)

	* mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
	Fix various typos.  Add "PAREN" operand.
	(MEM, MEM2): Define.
	(mn10300_opcodes): Surround all memory addresses with "PAREN"
	operands.  Fix several typos.

	* mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
	changes.

Mon Oct  7 16:48:45 1996  Jeffrey A Law  (law@cygnus.com)

	* mn10300-opc.c (FMT_XX): Renumber starting at one.
	(mn10300_operands): Rough cut.  Enough to parse "mov" instructions
	at this time.
	(mn10300_opcodes): Break opcode format out into its own field.
	Update many operand fields to deal with signed vs unsigned
	issues.  Fix one or two typos in the "mov" instruction
	opcode, mask and/or operand fields.

Mon Oct  7 11:39:49 1996  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

	* m68k-opc.c (plusha): Prefer encoding for m68040up, in case
	m68851 wasn't reset.

Thu Oct  3 17:17:02 1996  Ian Lance Taylor  <ian@cygnus.com>

	* mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
	all opcodes.  Very rough cut at operands for all opcodes.

	* mn10300-opc.c (mn10300_opcodes): Start fleshing out the
	opcode table.

Thu Oct  3 10:06:07 1996  Jeffrey A Law  (law@cygnus.com)

	* mn10200-opc.c, mn10300-opc.c: New files.
	* mn10200-dis.c, mn10300-dis.c: New files.
	* mn10x00-opc.c, mn10x00-dis.c: Deleted.
	* disassemble.c: Break mn10x00 support into 10200 and 10300
	support.
	* configure.in: Likewise.
	* configure: Rebuilt.

Thu Oct  3 15:59:12 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)

	* Makefile.in (MOSTLYCLEAN): Move config.log to distclean.

Wed Oct  2 23:28:42 1996  Jeffrey A Law  (law@cygnus.com)

	* mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
	MN10x00 processors.
	* disassemble (ARCH_mn10x00): Define.
	(disassembler): Handle bfd_arch_mn10x00.
	* configure.in: Recognize bfd_mn10x00_arch.
	* configure: Rebuilt.

Tue Oct  1 10:49:11 1996  Ian Lance Taylor  <ian@cygnus.com>

	* i386-dis.c (op_rtn): Change to be a pointer.  Adjust uses
	accordingly.  Don't declare functions using op_rtn.

Fri Sep 27 18:28:59 1996  Stu Grossman  (grossman@critters.cygnus.com)

	* v850-dis.c (disassemble):  Add memaddr argument.  Re-arrange
	params to be more standard.
	* (disassemble):  Print absolute addresses and symbolic names for
	branch and jump targets.
	* v850-opc.c (v850_operand):  Add displacement flag to 9 and 22
	bit operands.
	* (v850_opcodes):  Add breakpoint insn.

Mon Sep 23 12:32:26 1996  Ian Lance Taylor  <ian@cygnus.com>

	* m68k-opc.c: Move the fmovemx data register cases before the
 	other cases, so that they get recognized before the data register
 	does gets treated as a degenerate register list.

Tue Sep 17 12:06:51 1996  Ian Lance Taylor  <ian@cygnus.com>

	* mips-opc.c: Add a case for "div" and "divu" with two registers
	and a destination of $0.

Tue Sep 10 16:12:39 1996  Fred Fish  <fnf@rtl.cygnus.com>

	* mips-dis.c (print_insn_arg): Add prototype.
	(_print_insn_mips): Ditto.

Mon Sep  9 14:26:26 1996  Ian Lance Taylor  <ian@cygnus.com>

	* mips-dis.c (print_insn_arg): Print condition code registers as
 	$fccN.

Tue Sep  3 12:09:46 1996  Doug Evans  <dje@canuck.cygnus.com>

	* sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.

Tue Sep  3 12:05:25 1996  Jeffrey A Law  (law@cygnus.com)

	* v850-dis.c (disassemble): Make static.  Provide prototype.

Sun Sep  1 22:30:40 1996  Jeffrey A Law  (law@cygnus.com)

	* v850-opc.c (insert_d9, insert_d22): Fix boundary case
	in range checks.

Sat Aug 31 01:27:26 1996  Jeffrey A Law  (law@cygnus.com)

	* v850-dis.c (disassemble): Handle insertion of ',', '[' and
	']' characters into the output stream.
	* v850-opc.c (v850_opcodes: Remove size field from all opcodes.
	Add "memop" field to all opcodes (for the disassembler).
	Reorder opcodes so that "nop" comes before "mov" and "jr"
	comes before "jarl".

	* v850-dis.c (print_insn_v850): Fix typo in last change.

	* v850-dis.c (print_insn_v850): Properly handle disassembling
	a two byte insn at the end of a memory region when the memory
	region's size is only two byte aligned.

	* v850-dis.c (v850_cc_names): Fix stupid thinkos.

	* v850-dis.c (v850_reg_names): Define.
	(v850_sreg_names, v850_cc_names): Likewise.
	(disassemble): Very rough cut at printing operands (unformatted).

	* v850-opc.c (BOP_MASK): Fix.
	(v850_opcodes): Fix mask for jarl and jr.

	* v850-dis.c: New file.  Skeleton for disassembler support.
	* Makefile.in Remove v850 references, they're not needed here.
	* configure.in: Add v850-dis.o when building v850 toolchains.
	* configure: Rebuilt.
	* disassemble.c (disassembler): Call v850 disassembler.

	* v850-opc.c (insert_d8_7, extract_d8_7): New functions.
	(insert_d8_6, extract_d8_6): New functions.
	(v850_operands): Rename D7S to D7; operand for D7 is unsigned.
	Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
	Add D8_6.
	(IF4A, IF4B): Use "D7" instead of "D7S".
	(IF4C, IF4D): Use "D8_7" instead of "D8".
	(IF4E, IF4F): New.  Use "D8_6".
	(v850_opcodes): Use IF4A/IF4B for sld.b/sst.b.  Use IF4C/IF4D for
	sld.h/sst.h.  Use IF4E/IF4F for sld.w/sst.w.

	* v850-opc.c (insert_d16_15, extract_d16_15): New functions.
	(v850_operands): Change D16 to D16_15, use special insert/extract
	routines.  New new D16 that uses the generic insert/extract code.
	(IF7A, IF7B): Use D16_15.
	(IF7C, IF7D): New.  Use D16.
	(v850_opcodes): Use IF7C and IF7D for ld.b and st.b.

	* v850-opc.c (insert_d9, insert_d22): Slightly improve error
	message.  Issue an error if the branch offset is odd.

	* v850-opc.c: Add notes about needing special insert/extract
	for all the load/store insns, except "ld.b" and "st.b".

	* v850-opc.c (insert_d22, extract_d22): New functions.
	(v850_operands): Use insert_d22 and extract_d22 for
	D22 operands.
	(insert_d9): Fix range check.

Fri Aug 30 18:01:02 1996  J.T. Conklin  <jtc@hippo.cygnus.com>

	* v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
	and set bits field to D9 and D22 operands.

Thu Aug 29 11:10:46 1996  Jeffrey A Law  (law@cygnus.com)

	* v850-opc.c (v850_operands): Define SR2 operand.
	(v850_opcodes): "ldsr" uses R1,SR2.

	* v850-opc.c (v850_opcodes): Fix opcode specs for
	sld.w, sst.b, sst.h, sst.w, and nop.

Wed Aug 28 15:55:43 1996  Jeffrey A Law  (law@cygnus.com)

	* v850-opc.c (v850_opcodes): Add null opcode to mark the
	end of the opcode table.

Mon Aug 26 13:35:53 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>

	* d10v-opc.c (pre_defined_registers): Added register pairs,
	"r0-r1", "r2-r3", etc.

Fri Aug 23 00:27:01 1996  Jeffrey A Law  (law@cygnus.com)

	* v850-opc.c (v850_operands): Make I16 be a signed operand.
	Create I16U for an unsigned 16bit mmediate operand.
	(v850_opcodes): Use I16U for "ori", "andi" and "xori".

	* v850-opc.c (v850_operands): Define EP operand.
	(IF4A, IF4B, IF4C, IF4D): Use EP.

	* v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
	with immediate operand, "movhi".  Tweak "ldsr".

	* v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
	correct.  Get sld.[bhw] and sst.[bhw] closer.

	* v850-opc.c (v850_operands): "not" is a two byte insn

	* v850-opc.c (v850_opcodes): Correct bit pattern for setf.

	* v850-opc.c (v850_operands): D16 inserts at offset 16!

	* v850-opc.c (two): Get order of words correct.

	* v850-opc.c (v850_operands): I16 inserts at offset 16!

	* v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
	register source and destination operands.
	(v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".

	* v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode.  Fix
	same thinko in "trap" opcode.

	* v850-opc.c (v850_opcodes): Add initializer for size field
	on all opcodes.

	* v850-opc.c (v850_operands): D6 -> DS7.  References changed.
	Add D8 for 8-bit unsigned field in short load/store insns.
	(IF4A, IF4D): These both need two registers.
	(IF4C, IF4D): Define.  Use 8-bit unsigned field.
	(v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
	IF4C & IF4D.  For "trap" use I5U, not I5.  Add IF1 operand
	for "ldsr" and "stsr".
	* v850-opc.c (v850_operands): 3-bit immediate for bit insns
	is unsigned.

	* v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
	short store word (sst.w).

Thu Aug 22 16:57:27 1996  J.T. Conklin  <jtc@rtl.cygnus.com>

	* v850-opc.c (v850_operands): Added insert and extract fields,
 	pointers to functions that handle unusual operand encodings.

Thu Aug 22 01:05:24 1996  Jeffrey A Law  (law@cygnus.com)

	* v850-opc.c (v850_opcodes): Enable "trap".

	* v850-opc.c (v850_opcodes): Fix order of displacement
	and register for "set1", "clr1", "not1", and "tst1".

Wed Aug 21 18:46:26 1996  Jeffrey A Law  (law@cygnus.com)

	* v850-opc.c (v850_operands): Add "B3" support.
	(v850_opcodes): Fix and enable "set1", "clr1", "not1"
	and "tst1".

	* v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.

	* v850-opc.c: Close unterminated comment.

Wed Aug 21 17:31:26 1996  J.T. Conklin  <jtc@hippo.cygnus.com>

	* v850-opc.c (v850_operands): Add flags field.
 	(v850_opcodes): add move opcodes.

Tue Aug 20 14:41:03 1996  J.T. Conklin  <jtc@hippo.cygnus.com>

	* Makefile.in (ALL_MACHINES): Add v850-opc.o.
	* configure: (bfd_v850v_arch) Add new case.
	* configure.in: (bfd_v850_arch) Add new case.
	* v850-opc.c: New file.

Mon Aug 19 15:21:38 1996  Doug Evans  <dje@canuck.cygnus.com>

	* sparc-dis.c (print_insn_sparc): Handle little endian sparcs.

Thu Aug 15 13:14:43 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>

	* d10v-opc.c: Add additional information to the opcode
	table to help determinine which instructions can be done
	in parallel.

Thu Aug 15 13:11:13 1996  Stan Shebs  <shebs@andros.cygnus.com>

	* mpw-make.sed: Update editing of include pathnames to be
	more general.

Thu Aug 15 16:28:41 1996  James G. Smith  <jsmith@cygnus.co.uk>

	* arm-opc.h: Added "bx" instruction definition.

Wed Aug 14 17:00:04 1996  Richard Henderson  <rth@tamu.edu>

	* alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.

Mon Aug 12 14:30:37 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>

	* d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.

Fri Aug  9 13:21:59 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>

	* d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.

Thu Aug  8 12:43:52 1996  Klaus Kaempf  <kkaempf@progis.de>

	* makefile.vms: Update for alpha-opc changes.

Wed Aug  7 11:55:10 1996  Ian Lance Taylor  <ian@cygnus.com>

	* i386-dis.c (print_insn_i386): Actually return the correct value.
 	(ONE, OP_ONE): #ifdef out; not used.

Fri Aug  2 17:47:03 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>

	* d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
	Changed subi operand type to treat 0 as 16.

Wed Jul 31 16:21:41 1996  Ian Lance Taylor  <ian@cygnus.com>

	* m68k-opc.c: Add cpushl for the mcf5200.  From Ken Rose
	<rose@netcom.com>.

Wed Jul 31 14:39:27 1996  James G. Smith  <jsmith@cygnus.co.uk>

	* arm-opc.h: (arm_opcodes): Added halfword and sign-extension
 	memory transfer instructions. Add new format string entries %h and %s.
	* arm-dis.c: (print_insn_arm): Provide decoding of the new
	formats %h and %s.

Fri Jul 26 11:45:04 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>

	* d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
 	(d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.

Fri Jul 26 14:01:43 1996  Ian Lance Taylor  <ian@cygnus.com>

	* alpha-dis.c (print_insn_alpha_osf): Remove.
	(print_insn_alpha_vms): Remove.
	(print_insn_alpha): Make globally visible.  Chose the register
	names based on info->flavour.
	* disassemble.c: Always return print_insn_alpha for the alpha.

Thu Jul 25 15:24:17 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>

	* d10v-dis.c (dis_long): Handle unknown opcodes.

Thu Jul 25 12:08:09 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>

	* d10v-opc.c: Changes to support signed and unsigned numbers.
	All instructions with the same name that have long and short forms
	now end in ".l" or ".s".  Divs added.
	* d10v-dis.c: Changes to support signed and unsigned numbers.

Tue Jul 23 11:02:53 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>

	* d10v-dis.c: Change all functions to use info->print_address_func.

Mon Jul 22 15:38:53 1996  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

	* m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
 	move ccr/sr insns more strict so that the disassembler only
 	selects them when the addressing mode is data register.

Mon Jul 22 11:25:24 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
        * d10v-opc.c (pre_defined_registers):  Declare.
        * d10v-dis.c (print_operand): Now uses pre_defined_registers
        to pick a better name for the registers.

Mon Jul 22 13:47:23 1996  Ian Lance Taylor  <ian@cygnus.com>

	* sparc-opc.c: Fix opcode values for fpack16, and fpackfix.  Fix
	operands for fexpand and fpmerge.  From Christian Kuehnke
	<Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.

Mon Jul 22 13:17:06 1996  Richard Henderson  <rth@tamu.edu>

	* alpha-dis.c (print_insn_alpha): No longer the user-visible
	print routine.  Take new regnames and cpumask arguments.
	Kill the environment variable nonsense.
	(print_insn_alpha_osf): New function.  Do OSF/1 style regnames.
	(print_insn_alpha_vms): New function.  Do VMS style regnames.
	* disassemble.c (disassembler): Test bfd flavour to pick
	between OSF and VMS routines.  Default to OSF.

Thu Jul 18 17:19:34 1996  Ian Lance Taylor  <ian@cygnus.com>

	* configure.in: Call AC_SUBST (INSTALL_SHLIB).
	* configure: Rebuild.
	* Makefile.in (install): Use @INSTALL_SHLIB@.

Wed Jul 17 14:39:05 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>

	* configure: (bfd_d10v_arch) Add new case.
	* configure.in: (bfd_d10v_arch) Add new case.
	* d10v-dis.c: New file.
	* d10v-opc.c: New file.
	* disassemble.c (disassembler) Add entry for d10v.

Wed Jul 17 10:12:05 1996  J.T. Conklin  <jtc@rtl.cygnus.com>

	* m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
 	to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.

Mon Jul 15 16:59:55 1996  Stu Grossman  (grossman@critters.cygnus.com)

	* i386-dis.c:  Get rid of print_insn_i8086.  Use info.mach to
	distinguish between variants of the instruction set.
	* sparc-dis.c:  Get rid of print_insn_sparclite.  Use info.mach to
	distinguish between variants of the instruction set.

Fri Jul 12 10:12:01 1996  Stu Grossman  (grossman@critters.cygnus.com)

	* i386-dis.c (print_insn_i8086):  New routine to disassemble using
	the 8086 instruction set.
	* i386-dis.c:  General cleanups.  Make most things static.  Add
	prototypes.  Get rid of static variables aflags and dflags.  Pass
	them as args (to almost everything).

Thu Jul 11 11:58:44 1996  Jeffrey A Law  (law@cygnus.com)

	* h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.

	* h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".

	* h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
	if the next arg is marked with SRC_IN_DST.  Gross.

	* h8300-dis.c (bfd_h8_disassemble): Print "exr" when
	we're looking for and find EXR.

	* h8300-dis.c (bfd_h8_disassemble): We don't have a match
	if we're looking for KBIT and we don't find it.

	* h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
	for L_3 and L_2.

	* h8300-dis.c (bfd_h8_disassemble): Don't set plen for
	3bit immediate operands.

Tue Jul  9 10:55:20 1996  Ian Lance Taylor  <ian@cygnus.com>

	* Released binutils 2.7.

	* alpha-opc.c: Add new case of "mov".  From Klaus Kaempf
	<kkaempf@progis.ac-net.de>.

Thu Jul  4 11:42:51 1996  Ian Lance Taylor  <ian@cygnus.com>

	* alpha-opc.c: Correct second case of "mov" to use OPRL.

Wed Jul  3 16:03:47 1996  Stu Grossman  (grossman@critters.cygnus.com)

	* sparc-dis.c (print_insn_sparclite):  New routine to print
	sparclite instructions.

Wed Jul  3 14:21:18 1996  J.T. Conklin  <jtc@rtl.cygnus.com>

	* m68k-opc.c (m68k_opcodes): Add coldfire support.

Fri Jun 28 15:53:51 1996  Doug Evans  <dje@canuck.cygnus.com>

	* sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
	#ASI_NUCLEUS_LITTLE.  Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
	to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.

Tue Jun 25 22:58:31 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)

	* Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
	Use autoconf-set values.
	(docdir, oldincludedir): Removed.
	* configure.in (AC_PREREQ): autoconf 2.5 or higher.

Fri Jun 21 13:53:36 1996  Richard Henderson  <rth@tamu.edu>

	* alpha-opc.c: New file.
	* alpha-opc.h: Remove.
	* alpha-dis.c: Complete rewrite to use new opcode table.
	* configure.in: For bfd_alpha_arch, use alpha-opc.o.
	* configure: Rebuild with autoconf 2.10.
	* Makefile.in (ALL_MACHINES): Add alpha-opc.o.
	(alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
	alpha-opc.h.
	(alpha-opc.o): New target.

Wed Jun 19 15:55:12 1996  Ian Lance Taylor  <ian@cygnus.com>

	* sparc-dis.c (print_insn_sparc): Remove unused local variable i.
	Set imm_added_to_rs1 even if the source and destination register
	are not the same.

	* sparc-opc.c: Add some two operand forms of the wr instruction.

Tue Jun 18 15:58:27 1996  Jeffrey A. Law  <law@rtl.cygnus.com>

	* h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
	to just "mode".

	* disassemble.c (disassembler): Handle H8/S.
	* h8300-dis.c (print_insn_h8300s): New function for H8/S.

Tue Jun 18 18:06:50 1996  Ian Lance Taylor  <ian@cygnus.com>

	* sparc-opc.c: Add beq/teq as aliases for be/te.

	* ppc-opc.c: Fix fcmpo opcode.  From Sergei Steshenko
	<sergei@msil.sps.mot.com>.

Tue Jun 18 15:08:54 1996  Klaus Kaempf  <kkaempf@progis.de>

	* makefile.vms: New file.

	* alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.

Mon Jun 10 18:50:38 1996  Ian Lance Taylor  <ian@cygnus.com>

	* h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
	regardless of plen.

Tue Jun  4 09:15:53 1996  Doug Evans  <dje@canuck.cygnus.com>

	* i386-dis.c (OP_OFF): Call append_prefix.

Thu May 23 15:18:23 1996  Michael Meissner  <meissner@tiktok.cygnus.com>

	* ppc-opc.c (instruction encoding macros): Add explicit casts to
	unsigned long to silence a warning from the Solaris PowerPC
	compiler.

Thu Apr 25 19:33:32 1996  Doug Evans  <dje@canuck.cygnus.com>

	* sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.

Mon Apr 22 17:12:35 1996  Doug Evans  <dje@blues.cygnus.com>

	* sparc-dis.c (X_IMM,X_SIMM): New macros.
	(X_IMM13): Delete.
	(print_insn_sparc): Merge cases i,I,j together.  New cases X,Y.
	* sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
	Y for 6 bit shift constants.  Rewrite entries for crdcxt, cwrcxt,
	cpush, cpusha, cpull sparclet insns.

Wed Apr 17 14:20:22 1996  Doug Evans  <dje@canuck.cygnus.com>

	* sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.

Thu Apr 11 17:30:02 1996  Ian Lance Taylor  <ian@cygnus.com>

	* sparc-opc.c: Set F_FBR on floating point branch instructions.
	Set F_FLOAT on other floating point instructions.

Mon Apr  8 17:02:48 1996  Michael Meissner  <meissner@tiktok.cygnus.com>

	* ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
	registers.
 	(powerpc_opcodes): Add 860/821 specific SPRs.

Mon Apr  8 14:00:44 1996  Ian Lance Taylor  <ian@cygnus.com>

	* configure.in: Permit --enable-shared to specify a list of
	directories.  Set and substitute BFD_PICLIST.
	* configure: Rebuild.
	* Makefile.in (BFD_PICLIST): Rename from BFD_LIST.  Change all
	uses.  Set to @BFD_PICLIST@.

Fri Apr  5 17:12:27 1996  Jeffrey A Law  (law@cygnus.com)

	* h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
	not "abs", which may be needed for the absolute in something
	like btst #0,@10:8.  Print L_3 immediates separately from other
	immediates.  Change ABSMOV reference to ABS8MEM.

Wed Apr  3 10:40:45 1996  Doug Evans  <dje@canuck.cygnus.com>

	* sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
	(current_arch_mask): New static global.
	(compute_arch_mask): New static function.
	(print_insn_sparc): Delete sparc_v9_p.  New static local
	current_mach.  Resort opcode table if current_mach changes.
	Generalize "insn not supported" test.
	(compare_opcodes): Prefer supported opcodes to nonsupported ones.
	Delete test for v9/!v9.
	* sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
	(v6notlet): Define.
	(brfc): Split into CBR and FBR for coprocessor/fp branches.
	(brfcx): Renamed to FBRX.
	(condfc): Renamed to CONDFC.  Pass v6notlet to CBR (standard
	coprocessor mnemonics are not supported on the sparclet).
	(condf): Renamed to CONDF.
	(SLCBCC2): Delete F_ALIAS flag.

Sat Mar 30 21:45:59 1996  Doug Evans  <dje@canuck.cygnus.com>

	* sparc-opc.c (sparc_opcodes): rd must be 0 for
	mov foo,{%y,%psr,%wim,%tbr}.  Support mov foo,%asrX.

Fri Mar 29 13:02:40 1996  Ian Lance Taylor  <ian@cygnus.com>

	* Makefile.in (config.status): Depend upon BFD VERSION file, so
	that the shared library version number is set correctly.

Tue Mar 26 15:47:14 1996  Ian Lance Taylor  <ian@cygnus.com>

	* configure.in: Use AC_CHECK_TOOL to find ar and ranlib.  From
	Miles Bader <miles@gnu.ai.mit.edu>.
	* configure: Rebuild.

Sat Mar 16 13:04:07 1996  Fred Fish  <fnf@cygnus.com>

	* z8kgen.c (internal, gas): Call xmalloc rather than unchecked
	malloc.

Tue Mar 12 12:14:10 1996  Ian Lance Taylor  <ian@cygnus.com>

	* configure: Rebuild with autoconf 2.8.

Thu Mar  7 15:11:10 1996  Doug Evans  <dje@charmed.cygnus.com>

	* sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
	* sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.

Tue Mar  5 15:51:57 1996  Ian Lance Taylor  <ian@cygnus.com>

	* configure.in: Don't set SHLIB or SHLINK to an empty string,
	since they appear as targets in Makefile.in.
	* configure: Rebuild.

Mon Feb 26 13:03:40 1996  Stan Shebs  <shebs@andros.cygnus.com>

	* mpw-make.sed: Edit out shared library support bits.

Tue Feb 20 20:48:28 1996  Doug Evans  <dje@charmed.cygnus.com>

	* sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
	(sparc_opcode_archs): Add MASK_V8 to sparclet entry.
	(sparc_opcodes): Add sparclet insns.
	(sparclet_cpreg_table): New static local.
	(sparc_{encode,decode}_sparclet_cpreg): New functions.
	* sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.

Tue Feb 20 11:02:44 1996  Alan Modra  <alan@mullet.Levels.UniSA.Edu.Au>

	* i386-dis.c (index16): New static variable.
	(putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
	other way around.
	(OP_indirE): Return result of OP_E.
	(OP_E): Check for 16 bit addressing mode, and disassemble
	correctly.  Optimised 32 bit case a little.  Don't print
	"(base,index,scale)" when sib specifies only an offset.

Mon Feb 19 12:32:17 1996  Ian Lance Taylor  <ian@cygnus.com>

	* configure.in: Set and substitute SHLIB_DEP.
	* configure: Rebuild.
	* Makefile.in (SHLIB_DEP): New variable.
	(LIBIBERTY_LISTS, BFD_LIST): New variables.
	(stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST.  If
	COMMON_SHLIB, add them to piclist with appropriate modifications.
	($(SHLIB)): Depend upon $(SHLIB_DEP).  Don't check COMMON_SHLIB
	here: just use piclist.

Mon Feb 19 02:03:50 1996  Doug Evans  <dje@charmed.cygnus.com>

	* sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
	(print_insn_sparc): Rewrite v9/not-v9 tests.
	(compare_opcodes): Likewise.
	* sparc-opc.c (MASK_<ARCH>): Define.
	(v6,v7,v8,sparclite,v9,v9a): Redefine.
	(sparclet,v6notv9): Define.
	(sparc_opcode_archs): Delete member `conflicts'.  Add `supported'.
	(sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.

Thu Feb 15 14:45:05 1996  Ian Lance Taylor  <ian@cygnus.com>

	* configure.in: Call AC_PROG_CC before configure.host.
	* configure: Rebuild.

	* Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).

Wed Feb 14 19:01:27 1996  Alan Modra  <alan@spri.levels.unisa.edu.au>

	* i386-dis.c (onebyte_has_modrm): New static array.
	(twobyte_has_modrm): New static array.
	(print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.

Tue Feb 13 15:15:01 1996  Ian Lance Taylor  <ian@cygnus.com>

	* Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
	$(SHLINK).

Mon Feb 12 16:26:06 1996  Michael Meissner  <meissner@tiktok.cygnus.com>

	* ppc-opc.c (PPC): Undef, so default defination on Windows NT
	doesn't conflict.

Wed Feb  7 13:59:54 1996  Ian Lance Taylor  <ian@cygnus.com>

	* m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
	m68010up, not just m68020up | cpu32.

	* Makefile.in (SONAME): New variable.
	($(SHLINK)): Make a link to the transformed name, as well.
	(stamp-tshlink): New target.
	(install): Skip stamp-tshlink during install.

Tue Feb  6 12:28:54 1996  Ian Lance Taylor  <ian@cygnus.com>

	* configure.in: Call AC_ARG_PROGRAM.
	* configure: Rebuild.
	* Makefile.in (program_transform_name): New variable.
	(install): Transform library name before installing it.

Mon Feb  5 16:14:42 1996  Ian Lance Taylor  <ian@cygnus.com>

	* i960-dis.c (mem): Add HX dcinva instruction.

	Support for building as a shared library, based on patches from
	Alan Modra <alan@spri.levels.unisa.edu.au>:
	* configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
	New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
	SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
	* configure: Rebuild.
	* Makefile.in (ALLLIBS): New variable.
	(PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
	(COMMON_SHLIB, SHLINK): New variables.
	(.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
	(STAGESTUFF): Remove variable.
	(all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
	(stamp-piclist, piclist): New targets.
	($(SHLIB), $(SHLINK)): New targets.
	($(OFILES)): Depend upon stamp-picdir.
	(disassemble.o): Build twice if PICFLAG is set.
	(MOSTLYCLEAN): Add pic/*.o.
	(clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
	(distclean): Remove pic and stamp-picdir.
	(install): Install shared libraries.
	(stamp-picdir): New target.

Fri Feb  2 17:15:25 1996  Doug Evans  <dje@charmed.cygnus.com>

	* sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
	Print unknown instruction as "unknown", rather than in hex.

Tue Jan 30 14:06:08 1996  Ian Lance Taylor  <ian@cygnus.com>

	* dis-buf.c: Include "sysdep.h" before "dis-asm.h".

Thu Jan 25 20:24:07 1996  Doug Evans  <dje@charmed.cygnus.com>

	* sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.

Thu Jan 25 11:56:49 1996  Ian Lance Taylor  <ian@cygnus.com>

	* i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
	when necessary.  From Ulrich Drepper
	<drepper@myware.rz.uni-karlsruhe.de>.

Thu Jan 25 03:39:10 1996  Doug Evans  <dje@charmed.cygnus.com>

	* sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
	sparc_num_opcodes.  Update architecture enum values.
	* sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
	(sparc_opcode_lookup_arch): New function.
	(sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
	(sparc_opcodes): Add v9a shutdown insn.

Mon Jan 22 08:29:59 1996  Doug Evans  <dje@charmed.cygnus.com>

	* sparc-dis.c (print_insn_sparc): Renamed from print_insn.
	If DISASM_RAW_INSN, print insn in hex.  Handle v9a as opcode
	architecture.
	(print_insn_sparc64): Deleted.
	* disassemble.c (disassembler, case bfd_arch_sparc): Always use
	print_insn_sparc.

	* sparc-opc.c (architecture_pname): Add v9a.

Fri Jan 12 14:35:58 1996  David Mosberger-Tang  <davidm@AZStarNet.com>

	* alpha-opc.h (alpha_insn_set): VAX floating point opcode was
 	incorrectly defined as 0x16 when it should be 0x15.
	(FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
	(alpha_insn_set): added cvtst and cvttq float ops.  Also added
 	excb (exception barrier) which is defined in the Alpha
 	Architecture Handbook version 2.
	* alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
 	OPERATE_FORMAT_CODE type instructions.  The bug caused mulq to be
 	disassembled as or, for example.

Wed Jan 10 12:37:22 1996  Ian Lance Taylor  <ian@cygnus.com>

	* mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
	(_print_insn_mips): Change i from int to unsigned int.

Thu Jan  4 17:21:10 1996  David Edelsohn  <edelsohn@mhpcc.edu>

	* ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
	from tlbie PowerPC opcode.  Add PPC603 tlbld and tlbli.

Thu Dec 28 13:29:19 1995  John Hassey  <hassey@rtp.dg.com>

	* i386-dis.c: Added Pentium Pro instructions.

Tue Dec 19 22:56:35 1995  Michael Meissner  <meissner@tiktok.cygnus.com>

	* ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
	being for Power2.

Fri Dec 15 14:14:15 1995  J.T. Conklin  <jtc@rtl.cygnus.com>

	* sh-opc.h (sh_nibble_type): Added REG_B.
	(sh_arg_type): Added A_REG_B.
	(sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
 	and stc.l opcodes.
	* sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.

Fri Dec 15 16:44:31 1995  Ian Lance Taylor  <ian@cygnus.com>

	* disassemble.c (disassembler): Use new bfd_big_endian macro.

Tue Dec 12 12:22:24 1995  Ian Lance Taylor  <ian@cygnus.com>

	* Makefile.in (distclean): Remove stamp-h.  From Ronald
	F. Guilmette <rfg@monkeys.com>.

Tue Dec  5 13:42:44 1995  Stan Shebs  <shebs@andros.cygnus.com>

	From David Mosberger-Tang  <davidm@azstarnet.com>:
	* alpha-dis.c (print_insn_alpha): fixed decoding of cpys
 	instruction.

Mon Dec  4 12:29:05 1995  J.T. Conklin  <jtc@rtl.cygnus.com>

	* sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
	(sh_table): Added many SH3 opcodes.
	* sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.

Fri Dec  1 07:42:18 1995  Michael Meissner  <meissner@tiktok.cygnus.com>

	* ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
	(subco,subco.): Mark this PPC, not PPCCOM.

Mon Nov 27 13:09:52 1995  Ian Lance Taylor  <ian@cygnus.com>

	* configure: Rebuild with autoconf 2.7.

Tue Nov 21 18:28:06 1995  Ian Lance Taylor  <ian@cygnus.com>

	* configure: Rebuild with autoconf 2.6.

Wed Nov 15 19:02:53 1995  Ken Raeburn  <raeburn@cygnus.com>

	* configure.in: Sort list of architectures.  Accept but do nothing
	for alliant, convex, pyramid, romp, and tahoe.

Wed Nov  8 20:18:59 1995  Ian Lance Taylor  <ian@cygnus.com>

	* a29k-dis.c (print_special): Change num to unsigned int.

Wed Nov  8 20:10:35 1995  Eric Freudenthal <freudenthal@nyu.edu>

	* a29k-dis.c (print_insn): Cast insn24 to unsigned long when
	shifting it.

Tue Nov  7 15:21:06 1995  Ian Lance Taylor  <ian@cygnus.com>

	* configure.in: Call AC_CHECK_PROG to find and cache AR.
	* configure: Rebuilt.

Mon Nov  6 17:39:47 1995  Harry Dolan  <dolan@ssd.intel.com>

	* configure.in: Add case for bfd_i860_arch.
	* configure: Rebuild.

Fri Nov  3 12:45:31 1995  Ian Lance Taylor  <ian@cygnus.com>

	* m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
	* m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
	(NEXTDOUBLE): Likewise.
	(print_insn_m68k): Don't match fmoveml if there is more than one
	register in the list.
	(print_insn_arg): Handle a place of '8' for a type of 'L'.

Thu Nov  2 23:06:33 1995  Ian Lance Taylor  <ian@cygnus.com>

	* m68k-opc.c: Use #W rather than #w.
	* m68k-dis.c (print_insn_arg): Handle new 'W' place.

Wed Nov  1 13:30:24 1995  Ian Lance Taylor  <ian@cygnus.com>

	* m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
	and likewise for all the dbxx opcodes.

Mon Oct 30 20:50:40 1995  Fred Fish  <fnf@cygnus.com>

	* arc-dis.c: Include elf-bfd.h rather than libelf.h.

Mon Oct 23 11:11:34 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>

	* mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
 	the VR4100 specific instructions to the mips_opcodes structure.

Thu Oct 19 11:05:23 1995  Stan Shebs  <shebs@andros.cygnus.com>

	* mpw-config.in, mpw-make.sed: Remove ugly workaround for
	ugly Metrowerks bug in CW6, is fixed in CW7.

Mon Oct 16 12:59:01 1995  Michael Meissner  <meissner@tiktok.cygnus.com>

	* ppc-opc.c (whole file): Add flags for common/any support.

Tue Oct 10 11:06:07 1995  Fred Fish  <fnf@cygnus.com>

	* Makefile.in (BISON): Remove macro.
	(FLAGS_TO_PASS): Remove BISON.

Fri Oct  6 16:26:45 1995  Ken Raeburn  <raeburn@cygnus.com>

	Mon Sep 25 22:49:32 1995  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

	* m68k-dis.c (print_insn_m68k): Recognize all two-word
	instructions that take no args by looking at the match mask.
  	(print_insn_arg): Always print "%" before register names.
	[case 'c']: Use "nc" for the no-cache case, as recognized by gas.
	[case '_']: Don't print "@#" before address.
	[case 'J']: Use "%s" as format string, not register name.
	[case 'B']: Treat place == 'C' like 'l' and 'L'.

Thu Oct  5 22:16:20 1995  Ken Raeburn  <raeburn@cygnus.com>

	* i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
	name correctly.

Tue Oct  3 08:30:20 1995  steve chamberlain  <sac@slash.cygnus.com>

	From David Mosberger-Tang  <davidm@azstarnet.com>

	* alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
  	(alpha_insn_set): added definitions for VAX floating point
 	instructions (Unix compilers don't generate these, but handcoded
 	assembly might still use them).

	* alpha-dis.c (print_insn_alpha): added support for disassembling
 	the miscellaneous instructions in the Alpha instruction set.

Tue Sep 26 18:47:20 1995  Stan Shebs  <shebs@andros.cygnus.com>

	* mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
	no longer create sysdep.h, sed ppc-opc.c to work around a
	serious Metrowerks C bug.
	* mpw-make.in: Remove.
	* mpw-make.sed: New file, used by mpw-configure to edit
	Makefile.in into an MPW makefile.

Wed Sep 20 12:55:28 1995  Ian Lance Taylor  <ian@cygnus.com>

	* Makefile.in (maintainer-clean): New synonym for realclean.

Tue Sep 19 15:28:36 1995  Ian Lance Taylor  <ian@cygnus.com>

	* m68k-opc.c: Split pmove patterns which use 'P' into patterns
	which use '0', '1', and '2' instead.  Specify the proper size for
	a pmove immediate operand.  Correct the pmovefd patterns to be
	moves to a register, not from a register.
	* m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.

Thu Sep 14 11:58:22 1995  Doug Evans  <dje@canuck.cygnus.com>

	* sparc-opc.c (sparc_opcodes): Mark all insns that reference
	%psr, %wim, %tbr as F_NOTV9.

Fri Sep  8 01:07:38 1995  Ian Lance Taylor  <ian@cygnus.com>

	* Makefile.in (Makefile): Just rebuild Makefile when running
	config.status.
	(config.h, stamp-h): New targets.
	* configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
	earlier.  Don't bother to call AC_ARG_PROGRAM.  Touch stamp-h when
	rebuilding config.h.
	* configure: Rebuild.

	* mips-opc.c: Change unaligned loads and stores with "t,A"
	operands to use "t,A(b)".

Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>

	* sh-dis.c (print_insn_shx): Add F_FR0 support.

Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>

	* sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
	until 3 instead of until 2.

Wed Sep  6 21:21:33 1995  Ian Lance Taylor  <ian@cygnus.com>

	* Makefile.in (ALL_CFLAGS): Define.
	(.c.o, disassemble.o): Use $(ALL_CFLAGS).
	(MOSTLYCLEAN): Add config.log.
	(distclean): Don't remove config.log.
	* configure.in: Substitute HDEFINES.
	* configure: Rebuild.

Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>

	* sh-opc.h (sh_arg_type): Add F_FR0.
	(sh_table, case fmac): Add F_FR0 as first argument.

Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>

	* sh-opc.h (sh_opcode_info): Increase arg array size to 4.

Tue Sep  5 18:28:10 1995  Doug Evans  <dje@canuck.cygnus.com>

	* sparc-dis.c: Remove all references to NO_V9.

Tue Sep  5 20:03:26 1995  Ian Lance Taylor  <ian@cygnus.com>

	* aclocal.m4: Just include ../bfd/aclocal.m4.
	* configure: Rebuild.

Tue Sep  5 16:09:59 1995  Doug Evans  <dje@canuck.cygnus.com>

	* sparc-dis.c (X_DISP19): Define.
	(print_insn, case 'G'): Use it.
	(print_insn, case 'L'): Sign extend displacement.

Mon Sep  4 14:28:46 1995  Ian Lance Taylor  <ian@cygnus.com>

	* configure.in: Run ../bfd/configure.host before AC_PROG_CC.
	Subsitute CFLAGS and AR.  Call AC_PROG_INSTALL.  Don't substitute
	host_makefile_frag or frags.
	* aclocal.m4: New file.
	* configure: Rebuild.
	* Makefile.in (INSTALL): Set to @INSTALL@.
	(INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
	(INSTALL_DATA): Set to @INSTALL_DATA@.
	(AR): Set to @AR@.
	(AR_FLAGS): Set to rc rather than qc.
	(CC): Define as @CC@.
	(CFLAGS): Set to @CFLAGS@.
	(@host_makefile_frag@): Remove.
	(config.status): Remove dependency upon @frags@.

	* configure.in: ../bfd/config.bfd now just sets shell variables.
	Use them rather than looking through target Makefile fragments.
	* configure: Rebuild.

Thu Aug 31 12:35:32 1995  Jim Wilson  <wilson@chestnut.cygnus.com>

	* sh-opc.h (ftrc): Change FPUL_N to FPUL_M.

Wed Aug 30 13:52:28 1995  Doug Evans  <dje@canuck.cygnus.com>

	* sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
	Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
	sparc64 insns.

	* sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
	(lookup_{name,value}): New functions.
	(prefetch_table): New static local.
	(sparc_{encode,decode}_prefetch): New functions.
	* sparc-dis.c (print_insn): Handle '*' arg (prefetch function).

Wed Aug 30 11:11:58 1995  Jim Wilson  <wilson@chestnut.cygnus.com>

	* sh-opc.h: Add blank lines to improve readabililty of sh3e
	instructions.

Wed Aug 30 11:09:38 1995  Jim Wilson  <wilson@chestnut.cygnus.com>

	* sh-dis.c: Correct comment on first line of file.

Tue Aug 29 15:37:18 1995  Doug Evans  <dje@canuck.cygnus.com>

	* disassemble.c (disassembler): Handle bfd_mach_sparc64.

	* sparc-opc.c (asi, membar): New static locals.
	(sparc_{encode,decode}_{asi,membar}): New functions.
	(sparc_opcodes, membar insn): Fix.
	* sparc-dis.c (print_insn): Call sparc_decode_asi.
	Support decoding of membar masks.
	(X_MEMBAR): Define.

Sat Aug 26 21:22:48 1995  Ian Lance Taylor  <ian@cygnus.com>

	* m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.

Mon Aug 21 17:33:36 1995  Ian Lance Taylor  <ian@cygnus.com>

	* m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
	and likewise for the other branches.  Add bhs as an alias for bcc,
	and likewise for the size variants.  Add dbhs as an alias for
	dbcc.

Fri Aug 11 13:40:24 1995  Jeff Law  (law@snake.cs.utah.edu)

	* sh-opc.h (FP sts instructions): Update to match reality.

Mon Aug  7 16:12:58 1995  Ian Lance Taylor  <ian@cygnus.com>

	* m68k-dis.c: (fpcr_names): Add % before all register names.
	(reg_names): Likewise.
	(print_insn_arg): Don't explicitly print % before register names.
	Add % before register names in static array names.  In case 'r',
	print data registers as `@(Dn)', not `Dn@'.  When printing a
	memory address, don't print @# before it.
	(print_indexed): Change base_disp and outer_disp from int to
	bfd_vma.  Print using MIT syntax, not mutant invalid Motorola
	syntax.  Sign extend 8 byte displacement correctly.
	(print_base): Print using MIT syntax.  Print zpc when appropriate.
	Change parameter disp from int to bfd_vma.

	* m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
	for jsr.

Mon Aug  7 02:21:40 1995  Jeff Law  (law@snake.cs.utah.edu)

	* sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
	F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
	* sh-opc.h (sh_arg_type): Add new operand types.
	(sh_table): Add new opcodes from SH3E Floating Point ISA.

Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>

	* Makefile.in (distclean): Remove generated file config.h.

Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>

	* Makefile.in (distclean): Remove generated file config.h.

Wed Aug  2 18:33:40 1995  Ian Lance Taylor  <ian@cygnus.com>

	* m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
	Clean up tables.
	* m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
	(opcode): Remove.
	(print_insn_m68k): Change d to be const.  Use m68k_numopcodes
	rather than numopcodes.  Use m68k_opcodes rather than removed
	opcode function.  Don't check F_ALIAS.
	(print_insn_arg): Change first parameter to be const char *.
	* Makefile.in (ALL_MACHINES): Add m68k-opc.o.
	(m68k-opc.o): New target.
	* configure.in: Build m68k-opc.o for bfd_m68k_arch.
	* configure: Rebuild.

Wed Aug  2 08:23:38 1995  Doug Evans  <dje@canuck.cygnus.com>

	* sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
	(opcode_bits, opcode_hash_table): New variables.
	(opcodes_initialized): Renamed from opcodes_sorted.
	(build_hash_table): New function.
	(is_delayed_branch): Use hash table.
	(print_insn): Renamed from print_insn_sparc, made static.
	Build and use hash table.  If !sparc64, ignore sparc64 insns,
	and vice-versa if sparc64.
	(print_insn_sparc, print_insn_sparc64): New functions.
	(compare_opcodes): Move sparc64 opcodes to end.
	Print commutative insns with constant second.
	* sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.

Tue Aug  1 00:12:49 1995  Ian Lance Taylor  <ian@cygnus.com>

	* sh-dis.c (print_insn_shx): Remove unused local dslot.  Use
	print_address_func for A_BDISP12 and A_BDISP8.  Correct test which
	avoids printing a delay slot in a delay slot.
	* sh-opc.h (sh_table): Fully bracket last entry.

Mon Jul 31 12:04:47 1995  Doug Evans  <dje@canuck.cygnus.com>

	* sparc-opc.c (sllx, srax, srlx): Fix disassembly.

Wed Jul 12 00:59:34 1995  Ken Raeburn  <raeburn@kr-pc.cygnus.com>

	* configure.in: Get host_makefile_frag from ${srcdir}.

	* configure.in: Autoconfiscated.  Check for string[s].h.  Create
	config.h from config.in.  Don't set up sysdep.h link.
	* sysdep.h: New file.
	* configure, config.in: New files, generated from configure.in.
	* Makefile.in: Updated to be processed autoconf-style.
	(distclean): Keep sysdep.h.  Remove config.log and config.cache.
	(Makefile): Depend on config.status.
	(config.status): New rule.
	* configure.bat: Update Makefile substitutions.

Tue Jul 11 14:23:37 1995  Jeff Spiegel  <jeffs@lsil.com>

	* mips-opc.c (L1): Define.
	(mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
	addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
	and wb.

Tue Jul 11 11:49:49 1995  Ian Lance Taylor  <ian@cygnus.com>

	* mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
	if ISA 3 and addu otherwise, replacing or, since some MIPS chips
	have multiple add units but only a single logical unit.

	* ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
	shifted by 18, without any insertion or extraction function.
	(insert_cr, extract_cr): Remove.

Wed Jun 21 20:05:39 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>

	* m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
	register names.

Thu Jun 15 17:23:31 1995  Stan Shebs  <shebs@andros.cygnus.com>

	* mpw-config.in: Add sh and i386 configs, remove sparc config.
	* sh-opc.h: Add copyright.

Mon Jun  5 03:30:43 1995  Ken Raeburn  <raeburn@kr-laptop.cygnus.com>

	* Makefile.in (crunch-m68k): Delete extra target accidentally
	checked in a while ago.

Wed May 24 16:22:13 1995  Jim Wilson  <wilson@chestnut.cygnus.com>

	* sh-opc.h (sh_table): Add SH3 support.

Wed May 24 14:16:08 1995  Steve Chamberlain  <sac@slash.cygnus.com>

	* sh-opc.h: Added bsrf and braf.

Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)

	* arm-opc.h (arm_opcodes): Add 64-bit multiply patterns.  Delete
	bogus [ls]fm{ea,fd} patterns.

	* arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
	* arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
	initialize it from memory.  Make function static.
	(print_insn_{big,little}_arm): New functions.
	* disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
	the correct endianness.

Mon Apr 24 14:18:05 1995  Jason Molenda   (crash@phydeaux.cygnus.com>

	* sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
	enum list.

Wed Apr 19 14:07:03 1995  Michael Meissner  <meissner@tiktok.cygnus.com>

	* m68k-dis.c (opcode): Finish change made by Kung Hsu on April
	17th, so that it builds again using GCC as the compiler.

Tue Apr 18 12:14:51 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>

	* mips-dis.c (print_insn_little_mips): Cast return value from
	bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
	expects an unsigned long, and that might be fewer words of
	argument storage (e.g., if bfd_vma is long long on a 32-bit
	machine).
	(print_insn_big_mips): Likewise with bfd_getb32 value.
	(_print_insn_mips): Now static.

Mon Apr 17 12:23:28 1995  Kung Hsu  <kung@rtl.cygnus.com>

	* m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
	gcc memory hog problem with initializer is fixed.

Mon Apr 10 15:55:01 1995  Stan Shebs  <shebs@andros.cygnus.com>

	Merge in support for Mac MPW as a host.
	(Old change descriptions retained for informational value.)

	* mpw-config.in (archname): Compute from the config.
	(BFD_MACHINES, ARCHDEFS): Put into mk.tmp.

	* mpw-config.in (target_arch): Compute from canonical target.
	(m68k, mips, powerpc, sparc): Add architectures.
	* mpw-make.in (disassemble.c.o): Add.
	(ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).

	* mpw-config.in (BFD_MACHINES): Set to a default value.
	* mpw-make.in (BFD_MACHINES): Remove wired-in value.

	* mpw-make.in (CSEARCH): Add extra-include to search path.

	* mpw-config.in (varargs.h): Don't create.
	(sysdep.h): Create using forward-include.
	* mpw-make.in (CSEARCH): Add include/mpw to search path.

	* mpw-config.in: New file, MPW version of configure.in.
	* mpw-make.in: New file, MPW version of Makefile.in.

Fri Mar 31 14:23:38 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>

	* alpha-dis.c (print_insn_alpha): Put empty statement after
	default label.

Tue Mar 21 10:51:40 1995  Jeff Law  (law@snake.cs.utah.edu)

	* hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
	(low_sign_extend): Likewise.
	(get_field): Delete unused function.
	(set_field, deposit_14, deposit_21): Likewise.

Fri Mar 17 15:55:53 1995  J.T. Conklin  <jtc@rtl.cygnus.com>

	* i386-dis.c: Support for more pentium opcodes.  From Guy Harris
	  (guy@netapp.com).

Tue Mar 14 00:52:57 1995  Ken Raeburn  (raeburn@kr-pc.cygnus.com)

	Sat Feb 11 17:22:41 1995  Klaus Kaempf  (kkaempf@didymus.rmi.de)

	* alpha-opc.h (OSF_ASMCODE): define
	print pal-code names as defined in App C of the
	Alpha Architecture Reference Manual

	* alpha-dis.c: cleaned up output
	print stylized code forms as defined in App A.4.3 of the
	Alpha Architecture Reference Manual

Wed Mar  8 15:21:14 1995  Ian Lance Taylor  <ian@cygnus.com>

	* mips-opc.c: Add new mips4 instructions.  Don't set INSN_RFE for
	`rfe'.
	* mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
	'N', and 'M'.

Wed Mar  8 02:54:05 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>

	* m68k-dis.c (opcode): New function.  Returns address of opcode
	table entry given index, even if the opcode table was split to
	work around gcc bugs.
	(print_insn_m68k): Call opcode instead of referencing m68k_opcodes
	directly.
	(BREAK_UP_BIG_DECL): Make secondary array static and const.
	(reg_names): Now const.
	(print_insn_arg): Arrays cacheFieldName and names now const.
	(print_indexed): Array scales now const.

Tue Mar  7 16:41:21 1995  Ian Lance Taylor  <ian@cygnus.com>

	* ppc-opc.c: Sort recently added instructions by minor opcode
	number within major opcode number.

Mon Mar  6 10:04:36 1995  Jeff Law  (law@snake.cs.utah.edu)

	* hppa-dis.c: Include libhppa.h.

Fri Feb 24 19:15:36 1995  Ian Lance Taylor  <ian@cygnus.com>

	* mips-opc.c: Change dli to use M_DLI, and add dla.

Mon Feb 20 23:54:38 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* Makefile.in (ALL_MACHINES):  Add w65-dis.o.

Thu Feb 16 17:34:41 1995  Ian Lance Taylor  <ian@cygnus.com>

	* mips-opc.c: Add r4650 mul instruction.

Wed Feb 15 15:45:20 1995  Ian Lance Taylor  <ian@cygnus.com>

	* mips-opc.c: Add uld and usd macros for unaligned double load and
        store.

Tue Feb 14 13:17:37 1995  Michael Meissner  <meissner@tiktok.cygnus.com>

	* ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
	mfdcr, mtdcr, icbt, iccci.

Thu Feb  9 12:28:13 1995  Stan Shebs  <shebs@andros.cygnus.com>

	* i960-dis.c (struct tabent, struct sparse_tabent): Change the
        signed char fields to shorts, more portable.

Wed Feb  8 17:29:29 1995  Stan Shebs  <shebs@andros.cygnus.com>

	* i960-dis.c (struct tabent, struct sparse_tabent): Declare the
        char fields as signed chars, since they may have negative values.

Mon Feb  6 10:52:06 1995  J.T. Conklin  <jtc@rtl.cygnus.com>

	* i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
	  (mycroft@netbsd.org).

Mon Jan 30 12:38:00 1995  Ian Lance Taylor  <ian@cygnus.com>

	From "Logg, Ed" <elogg@ea.com>:
	* ppc-opc.c (extract_bdm): Correct parenthezisation.
	* ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
	value.

Thu Jan 26 18:32:08 1995  Ian Lance Taylor  <ian@cygnus.com>

	* ppc-opc.c: Changes based on patch from David Edelsohn
	<edelsohn@mhpcc.edu>.
	(powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
	SPR.
	(FXM_MASK): Define.
	(insert_tbr): New static function.
	(extract_tbr): New static function.
	(XFXFXM_MASK, XFXM): Define.
	(XSPRBAT_MASK, XSPRG_MASK): Define.
	(powerpc_opcodes): Add instructions to access special registers by
	name.  Add mtcr and mftbu.

Tue Jan 17 10:56:43 1995  Ian Lance Taylor  <ian@sanguine.cygnus.com>

	* mips-opc.c (P3): Define.
	(mips_opcodes): Add mad and madu.

Sun Jan 15 16:32:59 1995  Steve Chamberlain  <sac@splat>

	* configure.in: Add W65 support.
	* disassemble.c: Likewise.
	* w65-opc.h, w65-dis.c: New files.

Wed Dec 28 22:15:33 1994  Steve Chamberlain  (sac@jonny.cygnus.com)

	* h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
	immediates.

Tue Dec 20 11:25:12 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>

	* mips-opc.c: Add dli as a synonym for li.

Thu Dec  8 18:23:31 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>

	* alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
	print something for reserved opcode values, even if it won't
	assemble again.

	* mips-dis.c (_print_insn_mips): When initializing, shift right
	and mask, to avoid sign extension problems on the Alpha.

	* m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
	control registers.

Wed Nov 23 22:34:51 1994  Steve Chamberlain  (sac@jonny.cygnus.com)

	* sh-opc.h (mov.l gbr): Get direction right.
	* sh-dis.c (print_insn_shx): New function.
	(print_insn_shl, print_insn_sh): Call print_insn_shx to
	print opcodes with right byte order.

Thu Nov  3 19:32:22 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>

	* ns32k-dis.c (struct ns32k_option): Renamed from struct option,
	to avoid conflicts with getopt.

Mon Oct 31 18:48:10 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>

	* hppa-dis.c (print_insn_hppa): Read the instruction using
	bfd_getb32, so that it works on a little endian or 64 bit host.
	Remove unused local variable op.

Tue Oct 25 17:07:57 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>

	* mips-opc.c: Use or instead of addu for pseudo-op move, since
	addu does not work correctly if -mips3.

Wed Oct 19 13:40:16 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>

	* a29k-dis.c (print_special): Add special register names defined
	on 29030, 29040 and 29050.
	(print_insn): Handle new operand type 'I'.

Wed Oct 12 11:59:55 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>

	* Makefile.in (INSTALL): Use top level install.sh script.

Wed Oct  5 19:16:29 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>

	* sparc-dis.c: Rewrite to use bitfields, rather than a union, so
	that it works on a little endian host.

Tue Oct  4 12:14:21 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>

	* configure.in: Use ${config_shell} when running config.bfd.

Wed Sep 21 18:49:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)

	* mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.

Thu Sep 15 16:30:22 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)

	* a29k-dis.c (print_insn): Print the opcode.

Wed Sep 14 17:52:14 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)

	* mips-opc.c (mips_opcodes): Set WR_t for sc and scd.

Sun Sep 11 22:32:17 1994  Jeff Law  (law@snake.cs.utah.edu)

	* hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.

Tue Sep  6 11:37:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)

	* mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
	which store a value into memory.

Sun Sep 04 17:58:10 1994  Richard Earnshaw (rwe@pegasus.esprit.ec.org)

	* configure.in, Makefile.in, disassemble.c: Add support for the ARM.
	* arm-dis.c, arm-opc.h: New files.

Fri Aug  5 14:00:05 1994  Stan Shebs  (shebs@andros.cygnus.com)

	* Makefile.in (ns32k-dis.o): Add dependency.
	* ns32k-dis.c (print_insn_arg): Declare initialized local as
	string, not as array of chars.

Thu Jul 28 18:14:16 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)

	* sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.

	* sparc-opc.c: Added sparclite extended FP operations, and
	versions of v9 impdep* instructions permitting specification of
	the OPF field.

Tue Jul 26 16:36:03 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)

	* i960-dis.c (reg_names): Now const.
	(struct sparse_tabent): New type, copied from array type in mem
	function.
	(ctrl): Local static array ctrl_tab now const.
	(cobr): Local static array cobr_tab now const.
	(mem): Local variables reg1, reg2, reg3 now point to const.  Local
	static variable mem_tab no longer explicitly initialized.  Changed
	mem_init to const array of struct sparse_tabent.
	(reg): Local static variable reg_tab no longer explicitly
	initialized.  Changed reg_init to const array of struct
	sparse_tabent.
	(ea): Local static array scale_tab now const.

	* i960-dis.c (reg): Added i960JX instructions to reg_init table.
	(REG_MAX): Updated.

Tue Jul 19 21:00:00 1994  DJ Delorie (dj@ctron.com)

	* configure.bat: the disassember needs to be enabled for
	"objdump -d" to work in djgpp.

Wed Jul 13 18:01:58 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)

	* ns32k-dis.c: Deleted all code in "#ifdef GDB".
	(invalid_float): Enabled general version, doesn't require running
	on ns32k host.  Changed to take char* argument, and test for
	explicitly specified sizes, instead of using sizeof() on host CPU
	types.
	(INVALID_FLOAT): Cast first argument.
	(opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
	list_P032, list_M032): Now const.
	(optlist, list_search): Made appropriate arguments now point to
	const.
	(print_insn_arg): Changed static array of one-character-string
	pointers into a static const array of characters; fixed sprintf
	statement accordingly.

Sun Jul 10 00:27:47 1994  Ian Dall  (dall@hfrd.dsto.gov.au)

	* opcodes/ns32k-dis.c: Semi-new file.  Had apparently been dropped
	from distribution. A ns32k-dis.c from a previous distribution has
	been brought up to date and supports the new interface.

	* disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.

	* configure.in: add bfd_ns32k_arch target support.

	* Makefile.in: add ns32k-dis.o to ALL_MACHINES.
	Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.

Wed Jun 29 22:10:37 1994  Steve Chamberlain  (sac@cygnus.com)

	* h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
	disassembly right.

Tue Jun 28 13:22:06 1994  Stan Shebs  (shebs@andros.cygnus.com)

	* h8300-dis.c, mips-dis.c: Don't use true and false.

Thu Jun 23 12:53:19 1994  David J. Mackenzie  (djm@rtl.cygnus.com)

	* configure.in: Change --with-targets to --enable-targets.

Wed Jun 22 13:38:32 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)

	* mips-dis.c (_print_insn_mips): Build a static hash table mapping
	opcodes to the first instruction with that opcode, to speed
	disassembly of large files.  From ralphc@pyramid.com (Ralph
	Campbell).

Tue Jun  7 12:49:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* Makefile.in (mostlyclean): Fix typo (was mostyclean).

Wed May 11 22:32:00 1994  DJ Delorie (dj@ctron.com)

	* configure.bat: update to latest makefile.in

Sat May  7 17:13:21 1994  Steve Chamberlain  (sac@cygnus.com)

	* a29k-dis.c (print_insn): Print 'x' type operand in hex.
	* h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
	* sh-dis.c (print_insn_sh): Don't recur endlessly if delay
	slot insn is in a delay slot.
	* z8k-opc.h: (resflg): Fix patterns.
	* h8500-opc.h Fix CR insn patterns.

Fri May  6 14:34:46 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
	"cmpl" before POWER versions, so that gas -many uses them.

Thu Apr 28 18:32:36 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)

	* disassemble.c: New file.
	* Makefile.in (OFILES): Add disassemble.o.
	(disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
	* configure.in: Define ARCHDEFS in Makefile.  Code taken from
	binutils/configure.in.

	* m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
	opcode being examined.

Thu Apr 21 17:08:40 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
	(insert_ral, insert_ram, insert_ras): New functions.
	(powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
	RAS for store with update.

Sat Apr 16 23:41:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* ppc-opc.c (powerpc_opcodes): Correct fcir.  From David Edelsohn
	(edelsohn@npac.syr.edu).

Wed Apr  6 17:11:45 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* mips-opc.c (mips_opcodes): Correct operands of "nor" with an
	immediate argument.

Mon Apr  4 16:30:46 1994  Doug Evans  (dje@canuck.cygnus.com)

	* sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".

Mon Apr  4 13:22:00 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* ppc-opc.c (powerpc_operands): The signedp field has been
	removed, so don't initialize it.  Set the PPC_OPERAND_SIGNED flag
	instead.  Add new operand SISIGNOPT.
	(powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
	Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
	* ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
	than signedp field.

Wed Mar 30 00:31:49 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* i386-dis.c (struct private):  Renamed to dis_private. `private'
	is a reserved word for dynix cc.

Mon Mar 28 13:00:15 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* configure.in: Change error message to refer to bfd/config.bfd
	rather than bfd/configure.in.

Mon Mar 28 12:28:30 1994  David Edelsohn  (edelsohn@npac.syr.edu)

	* ppc-opc.c: Define POWER2 as short alias flag.
	(powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
	fsqrt.

Wed Mar 23 12:23:05 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* i960-dis.c (print_insn_i960): Don't read a second word for
	opcodes 0, 1, 2 and 3.

Wed Mar 16 15:37:58 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* configure.in: Don't build m68881-ext.o for bfd_m68k_arch.

Mon Mar 14 14:53:50 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* m68881-ext.c: Removed; no longer used.
	* Makefile.in: Changed accordingly.

	* m68k-dis.c (ext_format_68881): Don't declare.
	(print_insn_m68k): If an instruction uses place 'i', it uses at
	least four fixed bytes.
	(print_insn_arg): Don't bump p by 2 for case 'I', place 'i'.  For
	extended float, convert to double using floatformat_to_double, not
	ieee_extended_to_double, and fetch the data before converting it.

Tue Mar  8 18:12:25 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* mips-opc.c: It's sqrt.s, not sqrt.w.  From
	davidj@ICSI.Berkeley.EDU (David Johnson).

Tue Feb  8 16:55:27 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
	PowerPC uses bdnz[l][a].

Tue Feb  8 00:32:28 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* dis-buf.c, i386-dis.c:  Include sysdep.h.

Mon Feb  7 19:22:23 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.

	* ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
	by Motorola PowerPC 601 with PPC_OPCODE_601.
	* ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
	Disassemble Motorola PowerPC 601 instructions as well as normal
	PowerPC instructions.

Sun Feb  6 07:45:17 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* i960-dis.c (reg, mem): Just use a static array instead of
	calling xmalloc.

Sat Feb  5 00:04:02 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

	* hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
	condition name index if this is for a negated condition.

	* hppa-dis.c (print_insn_hppa): No space before 'H' operand.
	Floating point format for 'H' operand is backwards from normal
	case (0 == double, 1 == single).  For '4', '6', '7', '9', and '8'
	operands (fmpyadd and fmpysub), handle bizarre register
	translation correctly for single precision format.

	* hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
	or 'I' operands if the next format specifier is 'M' (fcmp
	condition completer).

Feb  4 23:38:03 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* ppc-opc.c (powerpc_operands): New operand type MBE to handle a
	single number giving a bitmask for the MB and ME fields of an M
	form instruction.  Change NB to accept 32, and turn it into 0;
	also turn 0 into 32 when disassembling.  Seperated SH from NB.
	(insert_mbe, extract_mbe): New functions.
	(insert_nb, extract_nb): New functions.
	(SC_MASK): Mask out SA and LK bits.
	(powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
	RA, SI.  Change "liu" and "cau" to use UI rather than SI.  Mark
	"bctr" and "bctrl" as accepted by POWER.  Change "rlwimi",
	"rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
	"rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
	use MBE rather than MB.  Add "mfmq" and "mtmq" POWER instructions.
	(powerpc_macros): Define table of macro definitions.
	(powerpc_num_macros): Define.

	* ppc-dis.c (print_insn_powerpc): Don't skip optional operands
	if PPC_OPERAND_NEXT is set.

Sat Jan 22 23:10:07 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
	char.  Retrieve contents using bfd_getl32 instead of shifting.

Fri Jan 21 19:01:39 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* ppc-opc.c: New file.  Opcode table for PowerPC, including
	opcodes for POWER (RS/6000).
	* ppc-dis.c: New file.  PowerPC and Power (RS/6000) disassembler.
	* Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
	(CFILES): Add ppc-dis.c.
	(ppc-dis.o, ppc-opc.o): New targets.
	* configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.

Mon Jan 17 20:05:49 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

	* hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
	No space before 'u', 'f', or 'N'.

Sun Jan 16 14:20:16 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)

	* i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
	farther than we should.

	* i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.

Thu Jan  6 12:38:05 1994  David J. Mackenzie  (djm@thepub.cygnus.com)

	* sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.

Wed Jan  5 11:56:21 1994  David J. Mackenzie  (djm@thepub.cygnus.com)

	* i960-dis.c (print_insn_i960): Only read word2 if the instruction
	needs it, to prevent reading past the end of a section.

Wed Nov 17 17:20:12 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
	Removed t,A case for la; always use t,A(b) case.

Mon Nov  8 12:37:36 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	From Ted Lemen <mellon@pepper.ncd.com>
	* mips-dis.c (print_insn_arg): Handle 'k'.
	* mips-opc.c: Make cache use k, not t.

Sun Nov  7 23:52:34 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* alpha-opc.h, alpha-dis.c (print_insn_alpha):  Add
	FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
	FLOAT_FORMAT_CODE to put out floating point register names.

Mon Nov  1 18:17:51 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* mips-opc.c: Use macros for jal variants, to support SVR4 PIC.

Thu Oct 28 17:42:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.

Wed Oct 27 11:48:01 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
	larger than 32.  Moved dsxx32 variants first for disassembler.

Mon Oct 25 11:33:14 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)

	* z8kgen.c, z8k-opc.h: Add full lda information.

Tue Oct 19 12:39:25 1993  Jeffrey A Law  (law@cs.utah.edu)

	* hppa-dis.c (print_insn_hppa): Do not emit a space after
	movb instructions.  Any necessary space will be emitted by
	the code to handle nullification completers.

Wed Oct 13 16:19:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* mips-opc.c: Moved l.d down so that it disassembles as ldc1.

Fri Oct  8 02:34:21 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* alpha-opc.h:  Add ldl_l, fix typo for ldq_u.
	* alpha-dis.c (print_insn_alpha):  Add code for PAL_FORMAT_CODE.

Tue Oct  5 17:47:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* mips-opc.c: Correct lwu opcode value (book had it wrong).

Thu Sep 30 11:26:18 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)

	* z8k-dis.c (FETCH_DATA): get just the right amount of data.
	(unpack_instr): Cope with ARG_IMM4M1 type instructions.

Wed Sep 29 16:24:49 1993  K. Richard Pixley  (rich@sendai.cygnus.com)

	* m88k-dis.c (m88kdis): comment change.  Remove space after
	  printing mnemonic.
	  (printop): handle new arg types DEC and XREG for m88110.

Tue Sep 28 19:20:16 1993  Jeffrey A Law (law@snake.cs.utah.edu)

	* hppa-dis.c (print_insn_hppa): Handle 'z' operand
	type for absolute branch addresses.  Delete special
	"ble" and "be" code in 'W' operand code.

Fri Sep 24 14:08:33 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* mips-opc.c: Set hazard information correctly for branch
	likely instructions.

Fri Sep 17 04:41:17 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* alpha-dis.c (print_insn_alpha), alpha-opc.h:  Fix bugs, use
	info->fprintf_func for printing and info->print_address_func for
	address output.

Wed Sep 15 12:12:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* mips-opc.c: Set INSN_TRAP for tXX instructions.

Thu Sep  9 10:11:27 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
	Corrected second case of "b" for disassembler.

Tue Sep  7 14:25:15 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* mips-dis.c, m88k-dis.c: Don't include libbfd.h.  Changed calls
	to BFD swapping routines to correspond to BFD name changes.

Thu Sep  2 10:35:25 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* mips-opc.c: Change div machine instruction to be z,s,t rather
	than s,t.  Change div macro to be d,v,t rather than d,s,t.
	Likewise for divu, ddiv, ddivu.  Added z,s,t case for drem, dremu,
	rem and remu which generates only the corresponding div
	instruction.  This is for compatibility with the MIPS assembler,
	which only generates the simple machine instruction when an
	explicit destination of $0 is used.
	* mips-dis.c (print_insn_arg): Handle 'z' (always register zero).

Thu Aug 26 17:41:44 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
	WR_31 hazard for bal, bgezal, bltzal.

Thu Aug 26 17:20:02 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* hppa-dis.c (print_insn_hppa): Use print function
	from within the disassemble_info, not fprintf_filtered.

Wed Aug 25 13:51:40 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)

	* hppa-dis.c (print_insn_hppa): Handle '|' like '>'.  (From Jeff
	Law, law@cs.utah.edu.)

Mon Aug 23 12:44:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* mips-opc.c ("absu"): Removed.
	("dabs"): Added.

Fri Aug 20 10:52:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* mips-opc.c: Added r6000 and r4000 instructions and macros.
	Changed hazard information to distinguish between memory load
	delays and coprocessor load delays.

Wed Aug 18 15:39:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* mips-opc.c: li.d uses "T,L", not "S,F".  Added li.s.

Tue Aug 17 09:44:42 1993  David J. Mackenzie  (djm@thepub.cygnus.com)

	* configure.in: Don't pass cpu to config.bfd.

Tue Aug 17 12:23:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* m88k-dis.c (m88kdis): Make class unsigned.

Thu Aug 12 15:08:18 1993  Ian Lance Taylor  (ian@cygnus.com)

	* alpha-dis.c (print_insn_alpha): One branch format case was
	missing the instruction name.

Wed Aug 11 19:29:39 1993  David J. Mackenzie  (djm@thepub.cygnus.com)

	* Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
	Add the arch-specific auxiliary files.
	(OFILES): Remove the arch-specific auxiliary files
	and use BFD_MACHINES instead of DIS_LIBS.
	* configure.in: Set BFD_MACHINES based on --with-targets option.

Thu Aug 12 12:04:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b).  Similarly
	for swc1.

Sun Aug  8 15:09:30 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* sparc-opc.c: Change CONST to const to deal with gcc
	-Dconst=__const -traditional.

Fri Aug  6 10:58:55 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
	coprocessor instructions out of #if 0, and made them use new
	argument type "C".

Thu Aug  5 17:11:06 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.

Fri Jul 30 18:48:15 1993  John Gilmore  (gnu@cygnus.com)

	* sparc-opc.c:  Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
	instruction, for use by the disassembler.

	* sparc-dis.c (SEX):  Add sign extension macro.  Replace many
	hand-coded sign extensions that depended on 32-bit host ints.
	FIXME, we still depend on big-endian host bitfield ordering.
	(sparc_print_insn):  Set the insn_info_valid field, and the
	other fields that describe the instruction being printed.

Tue Jul 27 17:04:58 1993  Jim Wilson  (wilson@sphagnum.cygnus.com)

	* sparc-opc.c (call): Accept all 6 addressing modes valid for
	`jmp' instead of just one of them.

Wed Jul 21 11:43:32 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)

	* hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
	(fput_fp_reg_r): Renamed from fput_reg_r.
	(fput_fp_reg): New function.
	(print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.

	* hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.

	* hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.

Mon Jul 19 13:52:21 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)

	* hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.

	* hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
	don't output a space.

	* hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.

Sun Jul 18 16:30:02 1993  Jim Kingdon  (kingdon@rtl.cygnus.com)

	* mips-opc.c: New file, containing opcode table from
	../include/opcode/mips.h.
	* Makefile.in: Add it.

Thu Jul 15 12:37:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* m88k-dis.c: New file, moved in from gdb and changed to use the
	new dis-asm.h disassembler interface.
	* Makefile.in (DIS_LIBS): Added m88k-dis.o.
	(m88k-dis.o): New target.

Tue Jul 13 10:04:16 1993  Ian Lance Taylor  (ian@cygnus.com)

	* mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
	argument string const char * to correspond to opcode/mips.h.

Tue Jul  6 15:18:37 1993  Ian Lance Taylor  (ian@cygnus.com)

	* mips-dis.c: Updated to account for name changes in new version
	of opcode/mips.h.
	* Makefile.in: Added header file dependencies.

Sat Jul  3 23:47:56 1993  Doug Evans  (dje@canuck.cygnus.com)

	* h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.

Thu Jul  1 12:23:38 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
	extend, rather than shifts.

Sun Jun 20 20:56:56 1993  Ken Raeburn  (raeburn@poseidon.cygnus.com)

	* Makefile.in: Undo 15 June change.

Fri Jun 18 14:15:15 1993  Per Bothner  (bothner@deneb.cygnus.com)

	* m68k-dis.c (print_insn_arg):  Change return value to byte count
	or error code.
	* m68k-dis.c:  Re-write to detect invalid operands before
	printing anything, so we can handle this the same way we
	handle invalid opcodes.

Thu Jun 17 15:01:36 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)

	* sh-dis.c, sh-opc.h: Understand some more opcodes.

Wed Jun 16 13:48:05 1993  Ian Lance Taylor  (ian@cygnus.com)

	* hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
	header files.

Tue Jun 15 21:45:26 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)

	* sparc-dis.c: Don't declare qsort, since sysdep.h might.

	* configure.in: Do make sysdep.h link.
	* Makefile.in: Search ../include.  Don't search ../bfd.

Tue Jun 15 13:36:10 1993  Stu Grossman  (grossman@cygnus.com)

	Changes from Jeff Law, law@cs.utah.edu:
	* hppa-dis.c: Fix typo.  'a' and 'd' were reversed.
	Do not print a space before the completers specified by
	'a' and 'd'.

Fri Jun 11 18:40:21 1993  Ken Raeburn  (raeburn@cygnus.com)

	* mips-dis.c: No longer need to bomb out if HOST_64_BIT is
	defined, since gdb has been fixed.

	Changes from Jeff Law, law@cs.utah.edu:
	* hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
	fput_reg_r, fput_creg, fput_const, and fputs_filtered should
	be a *disassemble_info, not a *FILE.
	* hppa-dis.c: Support 'd', '!', and 'a'.
	* hppa-dis.c: Support 's' to extract a 2 bit space register.
	* hppa-dis.c: Delete cases which are no longer needed.

Fri Jun 11 07:53:48 1993  Jim Kingdon  (kingdon@cygnus.com)

	* m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.

Tue Jun  8 12:25:01 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)

	* h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
	H8/300-H opcodes.

Mon Jun  7 12:58:49 1993  Per Bothner  (bothner@rtl.cygnus.com)

	* Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
	* configure.in:  No longer need to configure to get sysdep.h.

Thu Jun  3 15:56:49 1993  Stu Grossman  (grossman@cygnus.com)

	* Patches from Jeffrey Law <law@cs.utah.edu>.
	* hppa-dis.c: Support 'I', 'J', and 'K' in output
	templates for 1.1 FP computational instructions.

Tue May 25 13:05:48 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)

	* h8500-dis.c (print_insn_h8500): Address argument is type
	bfd_vma.
	* z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
	Ditto.

	* h8500-opc.h (addr_class_type): No comma at end of enumerator.
	* sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.

	* sparc-dis.c (compare_opcodes): Move static declaration to
	top-level.

Fri May 21 14:17:37 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
	instruction, remove unimp hack from 'l' argument.

Wed May 19 15:35:54 1993  Stu Grossman  (grossman@cygnus.com)

	* z8k-dis.c (fetch_data):  Use unsigned char to make ancient gcc's
	happy.

Fri May 14 15:22:46 1993  Ian Lance Taylor  (ian@cygnus.com)

	* Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
	* mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
	instructions.

Fri May 14 00:09:14 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)

	* hppa-dis.c: Include dis-asm.h before sysdep.h.  Changed some
	arrays of string pointers to 2-d arrays of chars, to save
	space.

Thu May  6 20:51:17 1993  Fred Fish  (fnf@cygnus.com)

	* a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
	Cast second arg to read_memory_func to "bfd_byte *", as necessary.

Tue May  4 20:31:10 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)

	* hppa-dis.c: New file from Utah, adapted to new disassembler
	calling interface.
	* Makefile.in: Include it.

Mon Apr 26 18:17:42 1993  Steve Chamberlain  (sac@thepub.cygnus.com)

	* sh-dis.c, sh-opc.h: New files.

Fri Apr 23 18:51:22 1993  Steve Chamberlain  (sac@thepub.cygnus.com)

	* alpha-dis.c, alpha-opc.h: New files.

Tue Apr  6 12:54:08 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
	value.

Mon Apr  5 17:37:37 1993  John Gilmore  (gnu@cygnus.com)

	* sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.

Fri Apr  2 07:24:27 1993  Ian Lance Taylor  (ian@cygnus.com)

	* a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
	const.

Thu Apr  1 11:20:43 1993  Jim Kingdon  (kingdon@cygnus.com)

	* sparc-dis.c: Use fprintf_func a few places where I forgot,
	and double percent signs a few places.

	* a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.

	* i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
	Use info->print_address_func not print_address.

	* dis-buf.c (generic_print_address): New function.

Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* Makefile.in: Add sparc-dis.c.
	sparc-dis.c: New file, merges binutils and gdb versions as follows:
	From GDB:
	    Add `add' instruction to the set that get checked
	    for a preceding `sethi' in order to print an absolute address.
	    * (print_insn):  Disassembly prefers real instructions.
	    (is_delayed_branch):  Speed up.
	    * sparc-opcode.h: Add ALIAS bit to aliases.  Fix up opcode tables.
	    Still missing some float ops, and needs testing.
	    * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
	    F_ALIAS.  Use printf, not fprintf, when not passing a file
	    pointer...
	    (compare_opcodes): Check that identical instructions have
	    identical opcodes, complain otherwise.
	From binutils:
	    * New 'm' arg.
	    * Include reg_names.
	From neither:
	    Use dis-asm.h/read_memory_func interface.

Wed Mar 31 20:49:06 1993  K. Richard Pixley  (rich@rtl.cygnus.com)

	* h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
	  deliberately return non-zero to setjmp from longjmp.  Otherwise
	  this code fails to compile.

Wed Mar 31 17:04:31 1993  Stu Grossman  (grossman@cygnus.com)

	* m68k-dis.c:  Fix prototype for fetch_arg().

Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* dis-buf.c: New file, for new read_memory_func interface.
	Makefile.in (OFILES): Include it.
	m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
	Use new read_memory_func interface.

Mon Mar 29 14:02:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)

	* h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
	* h8500-opc.h: Fix couple of opcodes.

Wed Mar 24 02:03:36 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)

	* Makefile.in: add dvi & installcheck targets

Mon Mar 22 18:55:04 1993  John Gilmore  (gnu@cygnus.com)

	* Makefile.in:  Update for h8500-dis.c.

Fri Mar 19 14:27:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)

	* h8500-dis.c, h8500-opc.h: New files

Thu Mar 18 14:12:37 1993  Per Bothner  (bothner@rtl.cygnus.com)

	* mips-dis.c, z8k-dis.c:  Converted to use interface defined in
	../include/dis-asm.h.
	* m68k-dis.c:  New file (merge of ../binutils/m68k-pinsn.c
	and ../gdb/m68k-pinsn.c).
	* i386-dis.c:  New file (merge of ../binutils/i386-pinsn.c
	and ../gdb/i386-pinsn.c).
	* m68881-ext.c:  New file.  Moved definition of
	ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
	* Makefile.in:  Adjust for new files.
	* i386-dis.c:  Patches from John Hassey (hassey@dg-rtp.dg.com).
	* m68k-dis.c:  Recognize '9' placement code, so (say) pflush
	can be dis-assembled.

Wed Feb 17 09:19:47 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)

	* mips-dis.c (print_insn_arg): Now returns void.

Mon Jan 11 16:09:16 1993  Fred Fish  (fnf@cygnus.com)

	* mips-dis.c (ansidecl.h):  Include for benefit of sysdep.h
	files that use the macros.

Thu Jan  7 13:15:17 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

	* mips-dis.c: New file, from gdb/mips-pinsn.c.
	* Makefile.in (DIS_LIBS): Added mips-dis.o.
	(CFILES): Added mips-dis.c.

Thu Jan  7 07:36:33 1993  Steve Chamberlain  (sac@thepub.cygnus.com)

    	* z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
	* z8kgen.c, z8k-opc.h: fix sizes of some shifts.

Tue Dec 22 15:42:44 1992  Per Bothner  (bothner@rtl.cygnus.com)

	* Makefile.in:  Improve *clean rules.
	* configure.in:  Allow a default host.

Tue Nov 17 19:53:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

	* Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
	files include other sysdep files

Thu Nov 12 16:10:37 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

	* z8k-dis.c z8k-opc.h z8kgen.c: checkpoint

Fri Oct  9 04:56:05 1992  John Gilmore  (gnu@cygnus.com)

	* configure.in:  For host support, use ../bfd/configure.host
	so it stays in sync with the ../bfd/hosts database.

Thu Oct  1 23:38:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

	* configure.in: use cpu-vendor-os triple instead of nested cases

Wed Sep 30 16:09:20 1992  Michael Werner  (mtw@cygnus.com)

	* z8k-dis.c (unparse_instr): fix bug where opcode returned was
	*always* the wrong one.

Wed Sep 30 07:42:17 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

	* z8kgen.c: added copyright info

Tue Sep 29 12:20:21 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

	* z8k-dis.c (unparse_instr): prettier tabs
	* z8kgen.c -> z8k-opc.h: bug fixes in tables

Fri Sep 25 12:50:32 1992  Stu Grossman  (grossman at cygnus.com)

	* configure.in:  Add ncr* configuration.
	* z8k-dis.c (struct instr_data_s):  Make instr_asmsrc char to make
	picayune ANSI compilers happy.

Sep 20 08:50:55 1992  Fred Fish  (fnf@cygnus.com)

	* configure.in (i386):  Make i386 and i486 synonymous for now.
	* configure.in (i[34]86-*-sysv4):  Add my_host definition.

Fri Sep 18 17:01:23 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)

	* Makefile.in (install): Fix typo.

Fri Sep 18 02:04:24 1992  John Gilmore  (gnu@cygnus.com)

	* Makefile.in (make):  Remove obsolete crud.
	(sparc-opc.o):  Avoid Sun Make VPATH bug.

Tue Sep  8 17:29:27 1992  K. Richard Pixley  (rich@sendai.cygnus.com)

	* Makefile.in: since there are no SUBDIRS, remove rule and
	references of subdir_do.

Tue Sep  8 17:02:58 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)

	* Makefile.in (install): Get the library name right here too.
	Don't install bfd.h, since it's unrelated to this library.  No
	subdirs to recurse into, either.
	(CFILES): The source file has a .c suffix, not .o.

	* sparc-opc.c: New file, moved from BFD.
	* Makefile.in (OFILES): Build it.

Thu Sep  3 16:59:20 1992  Michael Werner  (mtw@cygnus.com)

	* z8k-dis.c: fixed forward refferences of some declarations.

Mon Aug 31 16:09:45 1992  Michael Werner  (mtw@cygnus.com)

	* Makefile.in: get the name of the library right

Mon Aug 31 13:47:35 1992  Steve Chamberlain  (sac@thepub.cygnus.com)

	* z8k-dis.c: knows how to disassemble z8k stuff
	* z8k-opc.h: new file full of z8000 opcodes

\f
Local Variables:
version-control: never
End: