projects / deliverable / binutils-gdb.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
Add mcore target
[deliverable/binutils-gdb.git] / opcodes / ChangeLog
CommitLineData
886796f9
NC		 11999-06-03 Philip Blundell <philb@gnu.org>
2
3 * arm-dis.c (print_insn_arm): Make LDRH/LDRB consistent with LDR
4 when target is PC-relative.
5
461d5ddd
ILT		 61999-05-28 Linus Nordberg <linus.nordberg@canit.se>
7
8 * m68k-opc.c: Rename MACL/MSACL to MAC/MSAC. Add MACM/MSACM. Add
9 MOVE MACSR,CCR.
10
11 * m68k-dis.c (fetch_arg): Add places `n', `o'.
12
13 * m68k-opc.c: Add MSAC, MACL, MOVE to/from ACC, MACSR, MASK.
14 Add mcf5206e to appropriate instructions.
15 Add alias for MAC, MSAC.
16
17 * m68k-dis.c (print_insn_arg): Add formats `E', `G', `H' and place
18 `N'.
19
20 * m68k-opc.c (m68k_opcodes): Add divsw, divsl, divuw, divul, macl,
21 macw, remsl, remul for mcf5307. Change mcf5200 --> mcf.
22
23 * m68k-dis.c: Add format `u' and places `h', `m', `M'.
24
5028a927
AM		 251999-05-18 Alan Modra <alan@spri.levels.unisa.edu.au>
26
27 * i386-dis.c (Ed): Define.
28 (dis386_twobyte_att, dis386_twobyte_intel): Use Ed for movd.
29 (Rw): Remove.
30 (OP_rm): Rename to OP_Rd.
31 (ONE): Remove.
32 (OP_ONE): Remove.
33 (putop): Add const to template and p.
34 (print_insn_x86): Delete.
35 (print_insn_i386): Merge old function print_insn_x86. Add const
36 to dp.
37 (struct dis386): Add const to name.
38 (dis386_att, dis386_intel): Add const.
39 (dis386_twobyte_att, dis386_twobyte_intel): Add const.
40 (names32, names16, names8, names_seg, index16): Add const.
41 (grps, prefix_user_table, float_reg): Add const.
42 (float_mem_att, float_mem_intel): Add const.
43 (oappend): Add const to s.
44 (OP_REG): Add const to s.
45 (ptr_reg): Add const to s.
46 (dofloat): Add const to dp.
47 (OP_C): Don't skip modrm, it's now done in OP_Rd.
48 (OP_D): Ditto.
49 (OP_T): Ditto.
50 (OP_Rd): Check for valid mod. Call Op_E to print.
51 (OP_E): Handle d_mode arg. Check for bad sfence,lea,lds etc.
52 (OP_MS): Check for valid mod. Call Op_EM to print.
53 (OP_3DNowSuffix): Set obufp and use oappend rather than
54 strcat. Call BadOp() for errors.
55 (OP_SIMD_Suffix): Likewise.
56 (BadOp): New function.
57
c608c12e
AM		 581999-05-12 Alan Modra <alan@spri.levels.unisa.edu.au>
59
60 * i386-dis.c (dis386_intel): Remove macro chars, except for
61 jEcxz. Change cWtR and cRtd to cW and cR.
62 (dis386_twobyte_intel): Remove macro chars here too.
63 (putop): Handle R and W macros for intel mode.
64
65 * i386-dis.c (SIMD_Fixup): New function.
66 (dis386_twobyte_att): Use it on movlps and movhps, and change
67 Ev to EX on these insns. Change movmskps Ev, XM to Gv, EX.
68 (dis386_twobyte_intel): Same here.
69
70 * i386-dis.c (Av): Remove.
71 (Ap): remove lptr.
72 (lptr): Remove.
73 (OPSIMD): Define.
74 (OP_SIMD_Suffix): New function.
75 (OP_DIR): Remove dead code.
76 (eAX_reg..eDI_reg): Renumber.
77 (onebyte_has_modrm): Table numbering comments.
78 (INTERNAL_DISASSEMBLER_ERROR): Move to before print_insn_x86.
79 (print_insn_x86): Move all prefix oappends to after uses_f3_prefix
80 checks. Print error on invalid dp->bytemode2. Remove simd_cmp,
81 and handle SIMD cmp insns in OP_SIMD_Suffix.
82 (info->bytes_per_line): Bump from 5 to 6.
83 (OP_None): Remove.
84 (OP_E): Use INTERNAL_DISASSEMBLER_ERROR. Handle sfence.
85 (OP_3DNowSuffix): Ensure mnemonic index unsigned.
86
87 PIII SIMD support from Doug Ledford <dledford@redhat.com>
88 * i386-dis.c (XM, EX, None): Define.
89 (OP_XMM, OP_EX, OP_None): New functions.
90 (USE_GROUPS, USE_PREFIX_USER_TABLE): Define.
91 (GRP14): Rename to GRPAMD.
92 (GRP*): Add USE_GROUPS flag.
93 (PREGRP*): Define.
94 (dis386_twobyte_att, dis386_twobyte_intel): Add SIMD insns.
95 (twobyte_has_modrm): Add SIMD entries.
96 (twobyte_uses_f3_prefix, simd_cmp_op, prefix_user_table): New.
97 (grps): Add SIMD insns.
98 (print_insn_x86): New vars uses_f3_prefix and simd_cmp. Don't
99 oappend repz if uses_f3_prefix. Add code to handle new groups for
100 SIMD insns.
101
102 From Maciej W. Rozycki <macro@ds2.pg.gda.pl>
103 * i386-dis.c (dis386_att, dis386_intel): Change 0xE8 call insn
104 operand from Av to Jv.
105
88685153
NC		 1061999-05-07 Nick Clifton <nickc@cygnus.com>
107
108 * mcore-dis.c (print_insn_mcore): Use .short to display
109 unidentified instructions, not .word.
110
252b5132
RH		 1111999-04-26 Tom Tromey <tromey@cygnus.com>
112
113 * aclocal.m4, configure: Updated for new version of libtool.
114
252b5132
RH		 1151999-04-14 Doug Evans <devans@casey.cygnus.com>
116
117 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
118 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
119
120Mon Apr 12 23:46:17 1999 Jeffrey A Law (law@cygnus.com)
121
122 * hppa-dis.c (print_insn_hppa, case '3'): New case for PA2.0
123 instructions.
124
1251999-04-10 Doug Evans <devans@casey.cygnus.com>
126
127 * fr30-desc.c,fr30-desc.h,fr30-ibld.c: Rebuild.
128 * m32r-desc.c,m32r-desc.h,m32r-opinst.c: Rebuild.
129
252b5132
RH		 1301999-04-06 Ian Lance Taylor <ian@zembu.com>
131
132 * opintl.h (LC_MESSAGES): Never define.
133
1341999-04-04 Ian Lance Taylor <ian@zembu.com>
135
136 * i386-dis.c (intel_syntax, open_char, close_char): Make static.
137 (separator_char, scale_char): Likewise.
138 (print_insn_x86): Likewise.
139 (print_insn_i386): Likewise. Add declaration.
140
1411999-03-26 Doug Evans <devans@casey.cygnus.com>
142
143 * fr30-dis.c: Rebuild.
144 * m32r-dis.c: Rebuild.
145
1461999-03-23 Ian Lance Taylor <ian@zembu.com>
147
148 * m68k-opc.c: Change compare instructions to use "@s" rather than
149 ";s" when used with an immediate operand.
150
1511999-03-22 Doug Evans <devans@casey.cygnus.com>
152
153 * cgen-opc.c (cgen_set_cpu): Delete.
154 (cgen_lookup_insn): max_insn_size renamed to max_insn_bitsize.
155 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c,fr30-opc.h:
156 Rebuild.
157 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h:
158 Rebuild.
159 * po/opcodes.pot: Rebuild.
160
1611999-03-16 Martin Hunt <hunt@cygnus.com>
162
163 * d30v-opc.c (mvtsys): Remove FLAG_LKR.
164
1651999-03-11 Doug Evans <devans@casey.cygnus.com>
166
167 * cgen-opc.c (cgen_set_cpu): New arg `isa'. All callers updated.
168 (cgen_operand_lookup_by_name,cgen_operand_lookup_by_num): New fns.
169 (cgen_get_insn_operands): Rewrite test for hardcoded/operand index.
170 * fr30-asm.c,fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c: Rebuild.
171 * m32r-asm.c,m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c: Rebuild.
172 * m32r-opinst.c: Rebuild.
173
1741999-02-25 Doug Evans <devans@casey.cygnus.com>
175
176 * cgen-opc.c (cgen_hw_lookup_by_name): Rewrite.
177 (cgen_hw_lookup_by_num): Rewrite.
178 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
179 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
180 * m32r-opinst.c: Rebuild.
181
182Sat Feb 13 14:06:19 1999 Richard Henderson <rth@cygnus.com>
183
184 * alpha-opc.c: Add sqrt+flags patterns. Add EV6 PALcode insns.
185 (insert_jhint): Fix insertion mask.
186 * alpha-dis.c (print_insn_alpha): Disassemble EV6 PALcode insns.
187
1881999-02-10 Doug Evans <devans@casey.cygnus.com>
189
190 * Makefile.in: Rebuild.
191
1921999-02-09 Doug Evans <devans@casey.cygnus.com>
193
194 * i960c-asm.c,i960c-dis.c,i960c-opc.c,i960c-opc.h: Delete.
195 * i960-dis.c (print_insn_i960): Rename from print_insn_i960_orig.
196 * Makefile.am: Remove references to them.
197 (HFILES): Add fr30-desc.h,m32r-desc.h.
198 (CFILES): Add fr30-desc.c,fr30-ibld.c,m32r-desc.c,m32r-ibld.c,
199 m32r-opinst.c.
200 (ALL_MACHINES): Update.
201 * configure.in: Redo handling of cgen_files.
202 (bfd_i960_arch): Delete i960c-*.lo files.
203 * configure: Regenerate.
204 * cgen-asm.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
205 (hash_insn_array): Rewrite.
206 * cgen-dis.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
207 (hash_insn_array): Rewrite.
208 * cgen-opc.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
209 (cgen_lookup_insn,cgen_get_insn_operands): Define here.
210 (cgen_lookup_get_insn_operands): Ditto.
211 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
212 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
213 * po/POTFILES.in: Rebuild.
214 * po/opcodes.pot: Rebuild.
215
216Fri Feb 5 00:04:24 1999 Ian Lance Taylor <ian@cygnus.com>
217
218 * Makefile.am: Rebuild dependencies.
219 (HFILES): Add fr30-opc.h.
220 (CFILES): Add fr30-asm.c, fr30-dis.c, fr30-opc.c.
221 * Makefile.in: Rebuild.
222
223 * configure.in: Change AC_PREREQ to 2.13. Remove AM_CYGWIN32.
224 Change AM_EXEEXT to AC_EXEEXT and AM_PROG_INSTALL to
225 AC_PROG_INSTALL.
226 * acconfig.h: Remove.
227 * configure: Rebuild with current autoconf/automake.
228 * aclocal.m4: Likewise.
229 * config.in: Likewise.
230 * Makefile.in: Likewise.
231
232Thu Feb 4 13:48:52 1999 Ian Lance Taylor <ian@cygnus.com>
233
234 * m68k-opc.c: Correct move (not movew) to status word on 5200.
235
236Mon Feb 1 20:54:36 1999 Catherine Moore <clm@cygnus.com>
237
238 * disassemble.c (disassembler): Handle bfd_mach_i386_i386_intel_syntax.
239 * i386-dis.c (x_mode): Define.
240 (dis386): Remove.
241 (dis386_att): New.
242 (dis386_intel): New.
243 (dis386_twobyte): Remove.
244 (dis386_twobyte_att): New.
245 (dis386_twobyte_intel): New.
246 (print_insn_x86): Use new arrays.
247 (float_mem): Remove.
248 (float_mem_intel): New.
249 (float_mem_att): New.
250 (dofloat): Use new float_mem arrays.
251 (print_insn_i386_att): New.
252 (print_insn_i386_intel): New.
253 (print_insn_i386): Handle bfd_mach_i386_i386_intel_syntax.
254 (putop): Handle intel syntax.
255 (OP_indirE): Handle intel syntax.
256 (OP_E): Handle intel syntax.
257 (OP_I): Handle intel syntax.
258 (OP_sI): Handle intel syntax.
259 (OP_OFF): Handle intel syntax.
260
261
262
2631999-01-27 Doug Evans <devans@casey.cygnus.com>
264
265 * fr30-opc.h,fr30-opc.c: Rebuild.
266 * i960c-opc.h,i960c-opc.c: Rebuild.
267 * m32r-opc.c: Rebuild.
268
269Tue Jan 19 18:01:54 1999 David Taylor <taylor@texas.cygnus.com>
270
271 * hppa-dis.c: revert HP merge changes until HP gives us
272 an updated file.
273
2741999-01-19 Nick Clifton <nickc@cygnus.com>
275
276 * arm-dis.c (print_insn_arm): Display ARM syntax for PC relative
277 offsets as well as symbloic address.
278
279Tue Jan 19 10:51:01 1999 David Taylor <taylor@texas.cygnus.com>
280
281 * hppa-dis.c: fix comments and some indentation.
282
2831999-01-12 Doug Evans <devans@casey.cygnus.com>
284
285 * fr30-opc.c,i960c-opc.c: Regenerate.
286
2871999-01-11 Doug Evans <devans@casey.cygnus.com>
288
289 * fr30-opc.c: Regenerate.
290
2911999-01-06 Doug Evans <devans@casey.cygnus.com>
292
293 * m32r-dis.c: Regenerate.
294
2951999-01-05 Doug Evans <devans@casey.cygnus.com>
296
297 * fr30-asm.c,fr30-dis.c,fr30-opc.h,fr30-opc.c: Regenerate.
298 * i960c-asm.c,i960c-dis.c,i960c-opc.h,i960c-opc.c: Regenerate.
299 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
300
3011999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
302
303 * configure.in: Require autoconf 2.12.1 or higher.
304
3051998-12-30 Gavin Romig-Koch <gavin@cygnus.com>
306
307 * mips16-opc.c: Mark branch insns with MIPS16_INSN_BRANCH.
308
309Wed Dec 16 16:17:49 1998 Dave Brolley <brolley@cygnus.com>
310
311 * fr30-opc.c: Regenerated.
312
3131998-12-16 Gavin Romig-Koch <gavin@cygnus.com>
314
315 * mips-dis.c (set_mips_isa_type): Handle bfd_mach_mips4111.
316
3171998-12-15 Dave Brolley <brolley@cygnus.com>
318
319 * fr30-opc.c,fr30-opc.h: Regenerated.
320
3211998-12-14 Dave Brolley <brolley@cygnus.com>
322
323 * fr30-opc.c,fr30-opc.h: Regenerated.
324
325Thu Dec 10 18:39:46 1998 Dave Brolley <brolley@cygnus.com>
326
327 * fr30-opc.c,fr30-opc.h: Regenerated.
328
329Thu Dec 10 12:49:24 1998 Doug Evans <devans@canuck.cygnus.com>
330
331 * m32r-opc.c: Regenerate.
332
333Tue Dec 8 13:56:18 1998 David Taylor <taylor@texas.cygnus.com>
334
335 * dis-buf.c (generic_strcat_address): reformat to GNU coding
336 conventions. change sprintf call to an sprintf_vma call.
337
338Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
339
340 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
341
342Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
343
344 The following changes were made by
345 Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
346 David Taylor <taylor@texas.cygnus.com>, and
347 Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
348 merge in changes by HP; HP did not create ChangeLog entries.
349
350 * dis-buf.c (generic_strcat_address): new function.
351
352 * hppa-dis.c: Changes to improve hppa disassembly.
353 Changed formatting in : reg_names, fp_reg_names,control_reg,
354 New variables : sign_extension_names, deposit_names, conversion_names
355 float_test_names, compare_cond_names_double, add_cond_names_double,
356 logical_cond_names_double, unit_cond_names_double,
357 branch_push_pop_names, saturation_names, shift_names, mix_names,
358 New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
359 Move some definitions to libhppa.h: GET_FIELD, GET_BIT
360 (fput_const): renamed as fput_hex_const
361 (print_insn_hppa):
362 - use the macros fputs_filtered and
363 fput_decimal_const whenever possible; calls to sign_extend require
364 2 params -- add a missing second param of 0.
365 - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
366 architecture version number of current machine. HP folks are
367 trying to handle situation where the target program was compiled
368 for PA 1.x (32-bit), but is running on a PA 2.0 machine and
369 visa versa.
370 - added new cases : 'g', 'B', 'm'
371 - added cases specifically for PA 2.0
372 - changed the following cases : '"', 'n', 'N', 'p', 'Z',
373 - calls to fput_const become calls to fput_hex_const
374
3751998-12-07 James E Wilson <wilson@wilson-pc.cygnus.com>
376
377 * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
378 (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
379 (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
380 * Makefile.in: Rebuilt.
381 * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
382 i960-dis.c to ta.
383 * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
384 * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
385
386Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
387
388 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
389
390Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
391
392 * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
393
394 * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
395 From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
396
397Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
398
399 * fr30-opc.c: Regenerate.
400
401Fri Dec 4 17:08:08 1998 Dave Brolley <brolley@cygnus.com>
402
403 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
404
405Thu Dec 3 14:26:20 1998 Dave Brolley <brolley@cygnus.com>
406
407 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
408
409Thu Dec 3 00:09:17 1998 Doug Evans <devans@canuck.cygnus.com>
410
411 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
412
4131998-11-30 Doug Evans <devans@casey.cygnus.com>
414
415 * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
416 CGEN_INSN_BASE_VALUE.
417 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
418 * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
419
420Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
421
422 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
423
424Tue Nov 24 11:20:54 1998 Dave Brolley <brolley@cygnus.com>
425
426 * fr30-asm.c,fr30-dis.c: Regenerated.
427
428Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
429
430 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
431
4321998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
433
434 * fr30-opc.c: Regenerated.
435
436Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
437
438 * fr30-opc.c: Regenerated.
439 * fr30-opc.h: Regenerated.
440 * fr30-dis.c: Regenerated.
441 * fr30-asm.c: Regenerated.
442
443Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
444
445 * mips-opc.c (sync.p,sync.l): Swap insn values.
446
4471998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
448
449 * fr30-opc.c: Regenerate.
450
451Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
452
453 * fr30-opc.c: Regenerated.
454 * fr30-opc.h: Regenerated.
455
4561998-11-18 Doug Evans <devans@casey.cygnus.com>
457
458 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
459 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
460
461Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
462
463 * fr30-opc.c: Regenerated.
464
465Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
466
467 * fr30-opc.c: Regenerated.
468 * fr30-opc.h: Regenerated.
469 * fr30-dis.c: Regenerated.
470 * fr30-asm.c: Regenerated.
471
472Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
473
474 * po/opcodes.pot: Regenerated.
475 * fr30-opc.c: Regenerated.
476 * fr30-opc.h: Regenerated.
477 * fr30-dis.c: Regenerated.
478 * fr30-asm.c: Regenerated.
479
480Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
481
482 * disassemble.c (disassembler): Add support for FR30 target.
483
484Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
485
486 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
487 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
488
489Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
490
491 * po/opcodes.pot: Regenerate.
492 * po/POTFILES.in: Regenerate.
493 * fr30-opc.c: Regenerate.
494 * fr30-opc.h: Regenerate.
495
496Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
497
498 * m32r-asm.c: Regenerate.
499
500Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
501
502 * configure.in: Added case for bfd_fr30_arch.
503 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
504 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
505 (CLEANFILES): Added stamp-fr30.
506 (FR30_DEPS): Added.
507 * fr30-asm.c: New file.
508 * fr30-dis.c: New file.
509 * fr30-opc.c: New file.
510 * fr30-opc.h: New file.
511 * po/POTFILES.in: Regenerated
512 * po/opcodes.pot: Regenerated
513
514Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
515
516 * configure.in: detect cygwin* instead of cygwin32*
517 * configure: regenerate
518
519Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
520
521 * mips-opc.c (IS_M): Added.
522
523Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
524
525 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
526
527Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
528
529 * m32r-opc.h,m32r-opc.c: Regenerate.
530
531Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
532
533 * i386-dis.c (OP_3DNowSuffix): New static function.
534 (OPSUF): Define.
535 (GRP14): Define.
536 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
537 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
538 (insn_codep): New static variable.
539 (print_insn_x86): Init insn_codep after prefixes.
540 (grps): Add GRP14 entries for prefetch, prefetchw.
541 (OP_REG): Reformat.
542
543 From Jeff B Epler <jepler@usgs.gov>
544 * i386-dis.c (Suffix3DNow): New table.
545
546Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
547
548 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
549
550Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
551
552 * d10v-dis.c (print_operand): If num is nonzero, then
553 add OPERAND_ACC1, not OPERAND_ACC0.
554
555Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
556
557 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
558 insns.
559
560Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
561
562 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
563 class.
564
565Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
566
567 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
568
5691998-09-09 Michael Meissner <meissner@cygnus.com>
570
571 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
572 to/from SPRs.
573
574Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
575
576 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
577 object files.
578 (print_insn_little_arm): Detect Thumb symbols in elf object
579 files.
580
581Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
582
583 * alpha-dis.c (print_insn_alpha): Use the machine type to
584 decide which PALcode set to include.
585
586Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
587
588 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
589
590Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
591
592 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
593 MSUB and MSUBS instructions.
594
595Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
596
597 * ppc-opc.c (powerpc_operands): Omit parens around additions in
598 operand name macros.
599
600Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
601
602 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
603 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
604 +, -, and d for ColdFire.
605
606 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
607 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
608 (extract_mbe): Likewise.
609
610Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
611
612 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
613
614 * m10300-opc.c: First cut at UDF instructions.
615
616Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
617
618 * m32r-opc.c: Regenerate (remove semantic descriptions).
619
620Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
621
622 * arm-dis.c (print_insn_big_arm): Fix indentation.
623 (print_insn_little_arm): Likewise.
624
625Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
626
627 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
628 attributes.
629 (print_insn_little_arm): Likewise.
630
631Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
632
633 Move all global state data into opcode table struct, and treat
634 opcode table as something that is "opened/closed".
635 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
636 (cgen_asm_init): Delete.
637 (cgen_set_parse_operand_fn): New function.
638 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
639 (cgen_dis_init): Delete.
640 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
641 (cgen_current_{opcode_table_mach,endian}): Delete.
642 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
643
644Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
645
646 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
647 instructions.
648
649Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
650
651 * m10300-opc.c: Add entries for "no_match_operands" field in
652 the opcode table.
653
654Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
655
656 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
657
658Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
659
660 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
661
662Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
663
664 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
665 the first prefix.
666 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
667 than `fnstsw %eax'.
668 (OP_J): Remove unnecessary subtraction when 16-bit displacement
669 will be masked later.
670
671Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
672
673 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
674
675Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
676
677 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
678
679Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
680
681 * m10300-dis.c: Only recognize instructions from the currently
682 selected machine.
683 * m10300-opc.c: Add field indicating the particular variant of
684 the mn10300 each instruction is available on.
685
686Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
687
688 * configure.in: For bfd_vax_arch, build vax-dis.lo.
689 * Makefile.am: Rebuild dependencies.
690 (CFILES): Add vax-dis.c.
691 (ALL_MACHINES): Add vax-dis.lo.
692 * aclocal.m4: Rebuild with current libtool.
693 * configure, Makefile.in: Rebuild.
694
695Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
696
697 * vax-dis.c: New file, from work by Pauline Middelink
698 <middelin@polyware.iaf.nl>.
699 * disassemble.c (ARCH_vax): Define if ARCH_all.
700 (disassembler): Add case for ARCH_vax.
701 * makefile.vms: Support compilation on vms/vax.
702
703Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
704
705 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
706 related to sign extension and the size of ints.
707
708Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
709
710 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
711 instructions. Support (sp) addressing mode by expanding it into
712 (0,sp).
713
714Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
715
716 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
717
718Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
719
720 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
721
7221998-06-18 Ulrich Drepper <drepper@cygnus.com>
723
724 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
725 sysexit.
726
727Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
728
729 * mips-dis.c (print_insn_little_mips): Previously, instruction
730 printing references the symbol table to determine whether the
731 instruction resides in a block regular instructions or mips16
732 instructions. However, when the disassembler gets used in other
733 environments where the symbol table is not present, we no longer
734 rely in the symbol table, rather, use the low bit of the
735 instructions address to guess. There should be no change for usage
736 of the disassembler in host based programs, gdb, objdump.
737 (print_insn_big_mips): ditto.
738 (print_insn_mips): ditto
739
740Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
741
742 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
743
744Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
745
746 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
747
748Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
749
750 * i386-dis.c (index16): Add '%' to register names. Use ','
751 instead of '+'.
752
753Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
754
755 * i386-dis.c: Don't print opcode suffix when we can figure out the
756 size (and gas can!) by register operands, or from the default
757 size.
758 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
759 macro to 'E'.
760 (dis386, dis386_twobyte, grps): Use new suffix macros.
761 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
762 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
763 order of cmps operands to agree with Intel docs. Correct operand
764 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
765 agree with Intel docs.
766 (print_insn_x86): Print orphan fwait before other prefixes.
767 Return correct byte count for orphan fwait with prefixes. Don't
768 print `bound' operands in reverse order.
769 (ckprefix): Stop accumulating prefixes if we get fwait.
770 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
771
772Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
773
774 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
775 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
776
777Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
778
779 Fix problems when bfd_vma is wider than long.
780 * i386-dis.c: Make op_address and start_pc unsigned.
781 (set_op): Make parameter unsigned.
782 (print_insn_x86): Cast to bfd_vma when passing a value to
783 print_address_func.
784 * ns32k-dis.c (CORE_ADDR): Don't define.
785 (print_insn_ns32k): Change type of addr to bfd_vma. Use
786 bfd_scan_vma to read back address.
787 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
788 to format it.
789 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
790 (NEXTULONG): New definition.
791 (print_insn_m68k): Avoid overflow when computing third argument of
792 print_insn_arg.
793 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
794 Use disp instead of val to store offset values.
795 (print_indexed): Use base_disp instead of word to store base
796 displacement, to avoid overflow.
797 * m10300-dis.c (disassemble): Cast value to long when computing
798 pc-relative address, to get correct sign extension.
799
800Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
801
802 * m32r-opc.c: Regenerate.
803
804Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
805
806 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
807 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
808
809Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
810
811 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
812
813Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
814
815 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
816 functions to void.
817 (OP_DSreg): Rename from OP_DSSI.
818 (OP_ESreg): Rename from OP_ESDI.
819 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
820 (DSBX): Define.
821 (append_seg): Rename from append_prefix.
822 (ptr_reg): New function.
823 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
824 Add DSBX for xlat.
825 (PREFIX_ADDR): Rename from PREFIX_ADR.
826 (float_reg): Add non-broken opcodes for people who don't want
827 UNIXWARE_COMPAT.
828
829Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
830
831 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
832 68000/68008/68010.
833
834Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
835
836 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
837
838Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
839
840 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
841 0; produce error message for shifts of size 32 (or 64 for 64-bit
842 shifts), because the hardware doesn't support them.
843
844Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
845
846 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
847 LONG_2, LONG_2b formats to use this new operand.
848
849Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
850
851 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
852
853Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
854
855 * sparc-dis.c (print_insn_sparc): big endian instruction / little
856 endian data support.
857
858Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
859
860 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
861 and SHORT_B3b formats to use Rb instead of Ra.
862
863 Add FLAG_MUL16 to MUL2XH opcode.
864
865 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
866 to existing 1.1.1 parallelisation prohibition procedure.
867
868Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
869
870 * m32r-asm.c,m32r-dis.c: Regenerate.
871
872Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
873
874 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
875 with a shift count of 0.
876
877Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
878
879 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
880 (cgen_hw_lookup_by_num): New function.
881
882Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
883
884 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
885
886Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
887
888 * sparc-dis.c (print_insn_sparc): Always fetch instructions
889 as big-endian on SPARClite.
890
891Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
892
893 * d30v-opc.c (pre_defined_register): Remove alias for r0.
894
895Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
896
897 * po/Make-in (install-info): New target.
898
899Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
900
901 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
902 * configure: Rebuild.
903
904Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
905
906 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
907 variety of ISA2 instructions to set bottom ten bits of trap code.
908
909Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
910
911 * Makefile.am (config.status): Add explicit target so that
912 config.status depends upon bfd/configure.in.
913 * Makefile.in: Rebuild.
914
915Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
916
917 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
918 instructions to set bottom ten bits of break code.
919 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
920 for above optional argument.
921
922Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
923
924 * makefile.vms: Run dec c with /nodebug.
925
926Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
927
928 * Makefile.in: Rebuilt.
929 * Makefile.am: Regenerated dependencies with mkdep.
930
931 * opintl.h (_): Define as dgettext.
932
933Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
934
935 * cgen-asm.c: Internationalised.
936 * m32r-asm.c: Internationalised.
937 * m32r-dis.c: Internationalised.
938 * m32r-opc.c: Internationalised.
939
940 * aclocal.m4: Regenerated.
941 * configure: Regenerated.
942 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
943 * Makefile.in: Rebuild.
944 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
945 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
946
947Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
948
949 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
950 after AC_PROG_CC.
951 * aclocal.m4, configure: Rebuild with current tools.
952
953Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
954
955 * opintl.h: New file - contains internationalisation macros used
956 by source files in this directory.
957 * po/: New subdirectory - contains internationalisation files.
958 * po/Make-in: New file - Makefile constructor.
959 * po/POTFILES.in: New file - list of files in opcodes directory
960 that should be scan for internationalisation macros.
961 * po/opcodes.pot: New file - list of internationisation strings
962 found in files mentioned in po/POTFILES.in.
963 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
964 entry. Add intl directory to include paths.
965 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
966 HAVE_STRCPY, HAVE_LC_MESSAGES
967 * configure.in: Add rule to build Makefile in po subdirectory.
968 * Makefile.in: Rebuilt.
969 * aclocal.m4: Rebuilt.
970 * config.in: Rebuilt.
971 * configure: Rebuilt.
972 * alpha-opc.c: Internationalised.
973 * arc-dis.c: Internationalised.
974 * arc-opc.c: Internationalised.
975 * arm-dis.c: Internationalised.
976 * cgen-asm.c: Internationalised.
977 * d30v-dis.c: Internationalised.
978 * dis-buf.c: Internationalised.
979 * h8300-dis.c: Internationalised.
980 * h8500-dis.c: Internationalised.
981 * i386-dis.c: Internationalised.
982 * m10200-dis.c: Internationalised.
983 * m10300-dis.c: Internationalised.
984 * m68k-dis.c: Internationalised.
985 * m88k-dis.c: Internationalised.
986 * mips-dis.c: Internationalised.
987 * ns32k-dis.c: Internationalised.
988 * opintl.h: Internationalised.
989 * ppc-opc.c: Internationalised.
990 * sparc-dis.c: Internationalised.
991 * v850-dis.c: Internationalised.
992 * v850-opc.c: Internationalised.
993
994Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
995
996 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
997 (asm_hash_table_entries): New variable.
998 (cgen_asm_init): Free asm_hash_table_entries.
999 (hash_insn_array,hash_insn_list): New functions.
1000 (build_asm_hash_table): Use them. Hash macro insns as well.
1001 (cgen_asm_lookup_insn): Update.
1002 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
1003 (dis_hash_table_entries): New variable.
1004 (cgen_dis_init): Free dis_hash_table_entries.
1005 (hash_insn_array,hash_insn_list): New functions.
1006 (build_dis_hash_table): Use them. Hash macro insns as well.
1007 (cgen_dis_lookup_insn): Update.
1008 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
1009 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
1010 (cgen_macro_insn_count): New function.
1011 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1012
1013Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1014
1015 * i386-dis.c (OP_DSSI): Print segment override.
1016
1017Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
1018
1019 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
1020 operator.
1021
1022Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
1023
1024 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
1025 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
1026 * configure.in: Define and substitute WIN32LDFLAGS and
1027 WIN32LIBADD.
1028 * aclocal.m4: Rebuild with new libtool.
1029 * configure, Makefile.in: Rebuild.
1030
1031Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
1032
1033 * m32r-opc.c: Regenerate.
1034
1035Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
1036
1037 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1038 before trying to copy it.
1039 * Makefile.in: Rebuild.
1040
1041Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
1042
1043 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1044
1045Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
1046
1047 * ns32k-dis.c (bit_extract_simple): New function to extract bits
1048 from an arbitrary valid buffer instead of fetching them on demand
1049 using fetch_data().
1050 (invalid_float): use bit_extract_simple() instead of bit_extract().
1051
1052Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
1053
1054 From H.J. Lu <hjl@gnu.org>:
1055 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1056 to Ev for both.
1057
1058Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1059
1060 * Branched binutils 2.9.
1061
1062Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1063
1064 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1065 disassembling last 4 bytes of a section.
1066
1067Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1068
1069 Fix some gcc -Wall warnings:
1070 * arc-dis.c (print_insn): Add casts to avoid warnings.
1071 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1072 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1073 * m10200-dis.c (disassemble): Likewise.
1074 * m10300-dis.c (disassemble): Likewise.
1075 * ns32k-dis.c (print_insn_ns32k): Likewise.
1076 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1077 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1078 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1079 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1080 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1081 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1082 * tic80-dis.c (print_one_instruction): Likewise.
1083 * w65-dis.c (print_operand): Likewise.
1084 * z8k-dis.c (fetch_data): Likewise.
1085 * a29k-dis.c: Add return type for find_byte_func_type.
1086 * arc-opc.c: Include <stdio.h>. Remove declarations of
1087 insert_multshift and extract_multshift.
1088 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1089 conditionals.
1090 (extract_value): Fully parenthesize expression.
1091 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1092 * h8500-opc.h (h8500_table): Fully bracket initializer.
1093 * w65-opc.h (optable): Likewise.
1094 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1095 * i386-dis.c (OP_E): Initialize local variables.
1096 * m10200-dis.c (print_insn_mn10200): Likewise.
1097 * mips-dis.c (print_insn_mips16): Likewise.
1098 * sh-dis.c (print_insn_shx): Likewise.
1099 * v850-dis.c (print_insn_v850): Likewise.
1100 * ns32k-dis.c (print_insn_arg): Declare.
1101 (get_displacement, invalid_float): Declare.
1102 (list_search, sign_extend, flip_bytes): Declare return type.
1103 (get_displacement): Likewise.
1104 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1105 string.
1106 (print_insn_ns32k): Make i unsigned.
1107 (invalid_float): Make static. Declare type of val.
1108 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1109 on each for iteration.
1110 * tic30-dis.c (get_indirect_operand): Likewise.
1111 * z8k-dis.c (print_insn_z8001): Declare return type.
1112 (print_insn_z8002): Likewise.
1113 (unparse_instr): Fix sprintf format strings.
1114
1115Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1116
1117 * mips-opc.c: Add "sync.l" and "sync.p".
1118
1119Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1120
1121 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1122 default m68k variant to recognize.
1123
1124 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1125 (ctrl, cobr, mem, ea): Likewise.
1126 (print_addr): Likewise. Remove cast.
1127 (ea): Cast argument of print_addr to bfd_vma.
1128
1129 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1130 variable value.
1131 (cgen_parse_unsigned_integer): Likewise.
1132 (cgen_parse_address): Likewise.
1133
1134Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1135
1136 * i960-dis.c (ctrl): Add full braces to structure initialization.
1137 (cobr, mem, reg): Likewise.
1138 (ea): Correct parenthesization in expression.
1139
1140 * cgen-asm.c: Include <ctype.h>.
1141 (build_asm_hash_table): Remove unused local variable i.
1142 (cgen_parse_keyword): Add casts to avoid warnings.
1143
1144 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1145 symbol. Fix indentation.
1146 (print_insn_little_arm): Likewise.
1147
1148Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1149
1150 * configure.in: Use AM_DISABLE_SHARED.
1151 * aclocal.m4, configure: Rebuild with libtool 1.2.
1152
1153Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1154
1155 These patches are courtesy of Jonathan Walton and Tony Thompson
1156 (athompso@cambridge.arm.com).
1157
1158 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1159 relative addresses.
1160
1161 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1162 both the offset and the label closest to the destination.
1163
1164Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1165
1166 * m32r-opc.h: Regenerate.
1167
1168Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1169
1170 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1171
1172Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1173
1174 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1175 assume that info->symbols is non-empty.
1176
1177Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1178
1179 * alpha-opc.c (cvtqs) There is no such thing.
1180 (cvttq): Missing most of the /*d variants.
1181
1182Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1183
1184 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1185 delayed branches or jumps.
1186
1187Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1188
1189 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1190 to *info->symbols.
1191 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1192 * tic30-dis.c (print_branch): Likewise.
1193
1194Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1195
1196 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1197 saved_symbol code as it is no longer needed.
1198
1199Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1200
1201 * cgen-asm.c: Include symcat.h.
1202 * cgen-dis.c,cgen-opc.c: Ditto.
1203 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1204
1205Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1206
1207 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1208
1209Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1210
1211 * m32r-opc.[ch]: Regenerate.
1212
1213Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1214
1215 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1216 arguments. Don't perform validation here.
1217 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1218
1219Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1220
1221 * m32r-opc.c: Regenerate.
1222
1223Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1224
1225 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1226 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1227
1228Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1229
1230 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1231
1232Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1233
1234 * configure.in: Get the version number from BFD.
1235 * configure: Rebuild.
1236
1237 From H.J. Lu <hjl@gnu.org>:
1238 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1239 * Makefile.in: Rebuild.
1240
1241Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1242
1243 * m32r-opc.c: Regenerate.
1244 * m32r-opc.h: Regenerate.
1245
1246Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1247
1248 * m32r-opc.c: Regenerate.
1249
1250Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1251
1252 Fix rac to accept only a0:
1253 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1254 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1255 Introduce OPERAND_GPR.
1256 * d10v-dis.c (print_operand): Likewise.
1257
1258Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1259
1260 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1261 (cgen_hw_lookup): Make result const.
1262 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1263
1264Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1265
1266 * configure, aclocal.m4: Rebuild with new libtool.
1267
1268Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1269
1270 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1271 instructions use a PC relative branch, not absolute.
1272
1273Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1274
1275 * configure.in: Set libtool_enable_shared rather than
1276 libtool_shared. Remove diversion hack.
1277 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1278
1279Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1280
1281 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1282 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1283
1284Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1285
1286 * tic30-dis.c: New file.
1287 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1288 * configure.in: Handle bfd_tic30_arch.
1289 * Makefile.am: Rebuild dependencies.
1290 (CFILES): Add tic30-dis.c
1291 (ALL_MACHINES): Add tic30-dis.lo.
1292 * configure, Makefile.in: Rebuild.
1293
1294Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1295
1296 * m32r-opc.h (HAVE_CPU_M32R): Define.
1297
1298Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1299
1300 * v850-opc.c (insertion routines): If both alignment and size is
1301 wrong then report this.
1302
1303Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1304
1305 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1306 Only recognize instructions for the current target_processor.
1307
1308Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1309
1310 * d10v-dis.c (PC_MASK): Correct value.
1311 (print_operand): If there's a reloc, don't calculate the
1312 address because they could be in different sections.
1313
1314Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1315
1316 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1317 instruction after the 4650's "mul" instruction; nobody's using the
1318 4010 these days. If object files someday indicate which processor
1319 variant they're intended for, we can do a better job at this.
1320
1321Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1322
1323 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1324 table provided entry size. Use CGEN_INSN_MNEMONIC.
1325 (cgen_parse_keyword): Rewrite.
1326 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1327 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1328 * cgen-opc.c: Clean up pass over `struct foo' usage.
1329 (cgen_keyword_lookup_value): Handle "" entry.
1330 (cgen_keyword_add): Likewise.
1331
1332Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1333
1334 * mips-opc.c: Add FP_D to s.d instruction flags.
1335
1336Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1337
1338 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1339
1340Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1341
1342 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1343 PC relative offset forms before the 15 bit forms. An assembler command
1344 line option now chooses the default.
1345
1346Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1347
1348 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1349 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1350
13511997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1352
1353 * configure: Only build libopcodes shared if --enable-shared's value
1354 was `yes', or was set to `*opcodes*'.
1355 * aclocal.m4: Likewise.
1356 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1357 original source of this bit of code. It's not clear what the best fix
1358 would be, though.
1359
1360Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1361
1362 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1363 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1364 offset forms before the 15 bit forms, to default to the long forms.
1365
1366Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1367
1368 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1369
1370Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1371
1372 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1373 symbol if none is present.
1374 (print_insn_big_arm): Prevent examination of stored symbol if
1375 none is present.
1376
1377Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1378
1379 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1380
1381Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1382
1383 * disassemble.c: Remove disasm_symaddr() function.
1384
1385 * arm-dis.c: Use info->symbol instead of info->flags to determine
1386 if disassmbly should be in Thumb or Arm mode.
1387
1388Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1389
1390 * arm-dis.c: Add support for disassembling Thumb opcodes.
1391 (print_insn_thumb): New function.
1392
1393 * disassemble.c (disasm_symaddr): New function.
1394
1395 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1396 (thumb_opcodes): Table of Thumb opcodes.
1397
1398Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1399
1400 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1401
1402 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1403 and 'v' as operand types.
1404
1405Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1406
1407 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1408 <olivier.carmona@di.epfl.ch>.
1409 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1410 which has a two word opcode with a one word argument.
1411
1412Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1413
1414 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1415 unsigned, not signed.
1416 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1417
1418Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1419
1420 * d10v-dis.c (print_operand):
1421 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1422
1423Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1424
1425 * d10v-opc.c (OPERAND_FLAG): Split into:
1426 (OPERAND_FFLAG, OPERAND_CFLAG) .
1427 (FSRC): Split into:
1428 (FFSRC, CFSRC).
1429
1430Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1431
1432 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1433 field for all INSN_MACRO's.
1434 * mips16-opc.c: same
1435
1436Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1437
1438 * mips-opc.c (sync,cache): These are 3900 insns.
1439
1440Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1441
1442 sh-opc.h (sh_table): Remove ftst/nan.
1443
1444Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1445
1446 * mips-opc.c (ffc, ffs): Fix mask.
1447
1448Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1449
1450 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1451 control registers.
1452
1453Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1454
1455 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1456 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1457
1458Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1459
1460 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1461 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1462
1463Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1464
1465 * v850-dis.c (disassemble): Replace // with /* ... */
1466
1467Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1468
1469 * sparc-opc.c: Add wr & rd for v9a asr's.
1470 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1471 (v9a_asr_reg_names): New variable.
1472 Patch from David Miller <davem@vger.rutgers.edu>.
1473
1474Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1475
1476 * sparc-opc.c (v9notv9a): New insn type.
1477 (IMPDEP): Move to the end to not conflict with edge8 et al.
1478 Patch from David Miller <davem@vger.rutgers.edu>.
1479
1480Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1481
1482 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1483
1484Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1485
1486 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1487
1488Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1489
1490 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1491 of disassemble_info structure to determine if an overlay address
1492 has a matching symbol in low memory.
1493
1494 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1495 new symbol_at_address_func field in disassemble_info structure.
1496
1497Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1498
1499 * v850-opc.c (extract_d22): Use signed arithmatic.
1500
1501Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1502
1503 * mips-opc.c: Three op mult is not an ISA insn.
1504
1505Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1506
1507 * mips-opc.c: Fix formatting.
1508
1509Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1510
1511 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1512 than assuming that char is signed. Explicitly sign extend 16 bit
1513 values, rather than assuming that short is 16 bits.
1514 (OP_sI, OP_J, OP_DIR): Likewise.
1515
1516Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1517
1518 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1519 system registers.
1520
1521Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1522
1523 * v850-opc.c: Fix typo in comment.
1524
1525 * v850-dis.c (disassemble): Add test of processor type when
1526 determining opcodes.
1527
1528Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1529
1530 * configure.in: Use a diversion to set enable_shared before the
1531 arguments are parsed.
1532 * configure: Rebuild.
1533
1534Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1535
1536 * m68k-opc.c (TBL1): Use ! rather than `.
1537 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1538
1539Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1540
1541 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1542
1543 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1544
1545 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1546 for mcf5200.
1547
1548 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1549 * aclocal.m4: Rebuild with new libtool.
1550 * configure: Rebuild.
1551
1552Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1553
1554 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1555
1556Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1557
1558 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1559
1560Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1561
1562 * v850-opc.c (v850_opcodes): Further rearrangements.
1563
1564Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1565
1566 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1567
1568Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1569
1570 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1571 parser to work.
1572
1573Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1574
1575 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1576
1577Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1578
1579 * v850-opc.c: Initialise processors field of v850_opcode structure.
1580
1581Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1582
1583 Merge changes from Martin Hunt:
1584
1585 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1586
1587 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1588 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1589 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1590
1591 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1592
1593 * d30v-dis.c (print_insn): First operand of d*i (delayed
1594 branch) instructions is relative.
1595
1596 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1597 (d30v_operand_table): Add IMM6S3 type.
1598 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1599
1600 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1601 and cmp instructions.
1602
1603 * d30v-opc.c: Correct entries for repeat*, and sat*.
1604 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1605 types. Correct several formats.
1606
1607 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1608
1609 * d30v-opc.c (pre_defined_registers): Change control registers.
1610
1611 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1612 SHORT_C2. Manual was incorrect.
1613
1614 * d30v-dis.c (lookup_opcode): Return value now indicates
1615 if an opcode has a short and a long form. Used for deciding
1616 to append a ".s" or ".l".
1617 (print_insn): Append a ".s" to an instruction if it is
1618 the short form and ".l" if it is a long form. Do not append
1619 anything if the instruction has only one possible size.
1620
1621 * d30v-opc.c: Change mulx2h to require an even register.
1622 New form: SHORT_A2; a SHORT_A form that needs an even
1623 register as the first operand.
1624
1625 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1626 instruction was not being disassembled if there were an odd
1627 number of instructions.
1628
1629 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1630
1631Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1632
1633 * v850-dis.c (disassemble): Improved display of register lists.
1634
1635Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1636
1637 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1638 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1639 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1640 fandnot1s, fandnot2s.
1641
1642Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1643
1644 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1645
1646Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1647
1648 * cgen-asm.c (cgen_parse_address): New argument resultp.
1649 All callers updated.
1650 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1651
1652Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1653
1654 * mn10200-dis.c (disassemble): PC relative instructions are
1655 relative to the next instruction, not the current instruction.
1656
1657Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1658
1659 * v850-dis.c (disassemble): Only signed extend values that are not
1660 returned by extract functions.
1661 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1662
1663Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1664
1665 * v850-opc.c: Update comments. Remove use of
1666 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1667
1668Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1669
1670 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1671
1672Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1673
1674 * configure: Rebuilt with latest devo autoconf for NT support.
1675
1676Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1677
1678 * v850-dis.c (disassemble): Use curly brace syntax for register
1679 lists.
1680
1681 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1682 where r0 is being used as a destination register.
1683
1684Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1685
1686 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1687
1688Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1689
1690 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1691
1692Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1693
1694 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1695 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1696 opcodes..
1697
1698Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1699
1700 * configure (cgen_files): Add support for v850e target.
1701 * configure.in (cgen_files): Add support for v850e target.
1702
1703Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1704
1705 * configure (cgen_files): Add support for v850ea target.
1706 * configure.in (cgen_files): Add support for v850ea target.
1707
1708Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1709
1710 * configure.in (bfd_arc_arch): Add.
1711 * configure: Rebuild.
1712 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1713 * Makefile.in: Rebuild.
1714 * arc-dis.c, arc-opc.c: New files.
1715 * disassemble.c (ARCH_all): Define ARCH_arc.
1716 (disassembler): Add ARC support.
1717
1718Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1719
1720 * v850-dis.c (disassemble): Add support for v850EA instructions.
1721
1722 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1723 (v850_opcodes): Add v850EA instructions.
1724
1725 * v850-dis.c (disassemble): Add support for v850E instructions.
1726
1727 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1728 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1729 insert_spe, extract_spe): New Functions.
1730 (v850_opcodes): Add v850E instructions.
1731
1732 * v850-opc.c: Reorganised and re-layed out to improve readability
1733 and portability.
1734
1735Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1736
1737 * configure: Rebuild with autoconf 2.12.1.
1738
1739Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1740
1741 * aclocal.m4, configure: Rebuild with new automake patches.
1742
1743Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1744
1745 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1746 * acinclude.m4: Just include acinclude.m4 from BFD.
1747 * aclocal.m4, configure: Rebuild.
1748
1749Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1750
1751 * Makefile.am: New file, based on old Makefile.in.
1752 * acconfig.h: New file.
1753 * acinclude.m4: New file.
1754 * stamp-h.in: New file.
1755 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1756 Removed shared library handling; now handled by libtool. Replace
1757 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1758 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1759 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1760 handling in AC_OUTPUT.
1761 * dep-in.sed: Change .o to .lo.
1762 * Makefile.in: Now built with automake.
1763 * aclocal.m4: Now built with aclocal.
1764 * config.in, configure: Rebuild.
1765
1766Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
1767
1768 * mips-opc.c: Fix typo/thinko in "eret" instruction.
1769
1770Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
1771
1772 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1773 Make array const.
1774 * sparc-dis.c (sorted_opcodes): New static local.
1775 (struct opcode_hash): `opcode' is pointer to const element.
1776 (build_hash): First arg is now table of sorted pointers.
1777 (print_insn_sparc): Sort opcodes by sorting table of pointers.
1778 (compare_opcodes): Update.
1779
1780Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
1781
1782 * cgen-opc.c: #include <ctype.h>.
1783 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
1784 Handle case insensitive hashing.
1785 (hash_keyword_value): Change type of `value' to unsigned int.
1786
1787Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
1788
1789 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
1790 precision FP, mark it as such. Likewise for double precision
1791 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
1792 possible.
1793
1794Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
1795
1796 * ppc-opc.c (extract_nsi): make unsigned expression signed before
1797 negating it.
1798 (UNUSED): remove one level of parens, so MSVC doesn't choke on
1799 nesting depth when all the macros are expanded.
1800
1801Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
1802
1803 * sparc-opc.c: The fcmp v9a instructions take an integer register
1804 as a destination, not a floating point register. From Christian
1805 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
1806
1807Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
1808
1809 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
1810 syntax. From Roman Hodek
1811 <rnhodek@faui22c.informatik.uni-erlangen.de>.
1812
1813 * i386-dis.c (twobyte_has_modrm): Fix pand.
1814
1815Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
1816
1817 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
1818
1819Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
1820
1821 * arm-dis.c: Add prototypes for arm_decode_shift and
1822 print_insn_arm.
1823
1824Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
1825
1826 * mips-opc.c: Add r3900 insns.
1827
1828Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
1829
1830 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
1831 print delay slot instructions on the same line. When using a PC
1832 relative load, add a comment with the value being loaded if it can
1833 be obtained.
1834
1835Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
1836
1837 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
1838 to pushS/popS for segment regs and byte constant so that
1839 pushw/popw printed when in 16 bit data mode.
1840
1841 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
1842 print cbtw, cwtd in 16 bit data mode.
1843 * i386-dis.c (putop): extra case W to support above.
1844
1845 * i386-dis.c (print_insn_x86): print addr32 prefix when given
1846 address size prefix in 16 bit address mode.
1847
1848Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
1849
1850 * sh-dis.c: Reindent. Rename local variable fprintf to
1851 fprintf_fn.
1852
1853Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
1854
1855 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
1856
1857Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
1858
1859 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
1860 field membership.
1861 * mips16-opc.c (mip16_opcodes): same.
1862
1863Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
1864
1865 * m68k-opc.c (moveb): Change $d to %d.
1866
1867Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
1868
1869 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
1870 (twobyte_has_modrm): Likewise.
1871 (grps): Likewise.
1872 (OP_MMX, OP_EM, OP_MS): New static functions.
1873
1874 * i386-dis.c: Revert patch of April 4. The output now matches
1875 what gcc generates.
1876
1877Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
1878
1879 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
1880 of $simm16.
1881
1882Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
1883
1884 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
1885
1886Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
1887
1888 * Makefile.in (install): Depend upon installdirs.
1889 (installdirs): New target.
1890
1891Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
1892
1893 From Thomas Graichen <graichen@rzpd.de>:
1894 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
1895 * configure: Rebuild.
1896
1897Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
1898
1899 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
1900 Delete string{,s}.h support.
1901
1902Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
1903
1904 * cgen-asm.c (cgen_parse_operand_fn): New global.
1905 (cgen_parse_{{,un}signed_integer,address}): Update call to
1906 cgen_parse_operand_fn.
1907 (cgen_init_parse_operand): New function.
1908 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
1909 from cgen_asm_init_parse.
1910 (m32r_cgen_assemble_insn): New operand `errmsg'.
1911 Delete call to as_bad, return error message to caller.
1912 (m32r_cgen_asm_hash_keywords): #if 0 out.
1913
1914Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1915
1916 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
1917 not data register.
1918 [case 'J']: Fix typo in register name.
1919
1920Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
1921
1922 * configure.in: Substitute SHLIB_LIBS.
1923 * configure: Rebuild.
1924 * Makefile.in (SHLIB_LIBS): New variable.
1925 ($(SHLIB)): Use $(SHLIB_LIBS).
1926
1927Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
1928
1929 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
1930
1931 * cgen-opc.c (hash_keyword_name): Improve algorithm.
1932
1933 * disassemble.c (disassembler): Handle m32r.
1934
1935Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
1936
1937 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
1938 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
1939 * Makefile.in (CFILES): Add them.
1940 (ALL_MACHINES): Add them.
1941 (dependencies): Regenerate.
1942 * configure.in (cgen_files): New variable.
1943 (bfd_m32r_arch): Add entry.
1944 * configure: Regenerate.
1945
1946Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
1947
1948 * configure.in: Correct file names for bfd_mn10[23]00_arch.
1949 * configure: Rebuild.
1950
1951 * Makefile.in: Rebuild dependencies.
1952
1953 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
1954
1955 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
1956 fdivp.
1957
1958Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
1959
1960 * Branched binutils 2.8.
1961
1962Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
1963
1964 * m10200-dis.c: Rename from mn10200-dis.c.
1965 * m10200-opc.c: Rename from mn10200-opc.c.
1966 * m10300-dis.c: Rename from mn10300-dis.c
1967 * m10300-opc.c: Rename from mn10300-opc.c.
1968 * Makefile.in: Update accordingly.
1969
1970 * mips16-opc.c: Add mul and dmul macros.
1971
1972Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
1973
1974 * makefile.vms: Update CFLAGS, add clean target.
1975
1976Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
1977
1978 * mips-opc.c: Add "wait". From Ralf Baechle
1979 <ralf@gnu.ai.mit.edu>.
1980
1981 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
1982 * configure, config.in: Rebuild.
1983 * sysdep.h: Include <stdlib.h> if it exists.
1984 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
1985 <string.h>.
1986 * Makefile.in: Rebuild dependencies.
1987
1988Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
1989
1990 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
1991 Andrew Bray <andy@madhouse.demon.co.uk>.
1992
1993 * mips-opc.c: Add cast when setting mips_opcodes.
1994
1995Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
1996
1997 * v850-dis.c (disassemble): Fix sign extension problem.
1998 * v850-opc.c (extract_d*): Fix sign extension problems to make
1999 disassembly calculate branch offsets correctly.
2000
2001Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2002
2003 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2004
2005 * mips-opc.c: Add dctr and dctw.
2006
2007Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2008
2009 * d30v-dis.c (print_insn): Change the way signed constants
2010 are displayed.
2011
2012Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2013
2014 * Makefile.in (BFD_H): New variable.
2015 (HFILES): New variable.
2016 (CFILES): Add all C files.
2017 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2018 Delete old dependencies, and build new ones.
2019 * dep-in.sed: New file.
2020
2021Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2022
2023 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2024
2025Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2026
2027 * mn10200-opc.c: Change "trap" to "syscall".
2028 * mn10300-opc.c: Add new "syscall" instruction.
2029
2030Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2031
2032 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2033 mulul insns on the coldfire.
2034
2035Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2036
2037 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2038 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2039 (print_insn_little_arm): Likewise.
2040
2041Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2042
2043 Based on patches from H.J. Lu <hjl@lucon.org>:
2044 * i386-dis.c (fetch_data): Add prototype.
2045 * m68k-dis.c (fetch_data): Add prototype.
2046 (dummy_print_address): Add prototype. Make static.
2047 * ppc-opc.c (valid_bo): Add prototype.
2048 * sparc-dis.c (build_hash_table): Add prototype.
2049 (is_delayed_branch, compute_arch_mask): Add prototypes.
2050 (print_insn_sparc): Make several local variables const.
2051 (compare_opcodes): Change arguments to const PTR. Add prototype.
2052 * sparc-opc.c (arg): Change name field to be const.
2053 (lookup_name, lookup_value): Add prototypes. Change table and
2054 name parameters to be const.
2055 (sparc_encode_asi): Change name parameter to be const.
2056 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2057 (sparc_encode_sparclet_cpreg): Likewise.
2058 (sparc_decode_asi): Change return type to be const.
2059 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2060 (sparc_decode_sparclet_cpreg): Likewise.
2061
2062Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2063
2064 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2065 Solaris doesn't like the combined options, and the -f is
2066 unnecessary.
2067 (stamp-tshlink, install): Likewise.
2068
2069Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2070
2071 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2072 as relaxable.
2073
2074Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2075
2076 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2077
2078Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2079
2080 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2081 the mc68000.
2082
2083Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2084
2085 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2086
2087Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2088
2089 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2090
2091Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2092
2093 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2094
2095Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2096
2097 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2098 floatformat_to_double to make portable.
2099 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2100 precision float.
2101
2102Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2103
2104 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2105 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2106
2107Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2108
2109 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2110 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2111
2112Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2113
2114 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2115 (OFF_SL_BR_SCALED): ... to this, and added the flag
2116 TIC80_OPERAND_BASEREL to the flags word.
2117 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2118 OFF_SL_BR_SCALED.
2119
2120Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2121
2122 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2123 Change mips_opcodes from const array to a pointer,
2124 and change bfd_mips_num_opcodes from const int to int,
2125 so that we can increase the size of the mips opcodes table
2126 dynamically.
2127
2128Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2129
2130 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2131 store BITNUM values in the table in one's complement form
2132 to match behavior when assembler is given a raw numeric
2133 value for a BITNUM operand.
2134 * tic80-dis.c (print_operand_bitnum): Ditto.
2135
2136Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2137
2138 * d30v-opc.c: Removed references to FLAG_X.
2139
2140Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2141
2142 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2143
2144Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2145
2146 * Makefile.in: Added d30v object files.
2147 * configure: (bfd_d30v_arch) Rebuilt.
2148 * configure.in: (bfd_d30v_arch) Added new case.
2149 * d30v-dis.c: New file.
2150 * d30v-opc.c: New file.
2151 * disassemble.c (disassembler) Add entry for d30v.
2152
2153Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2154
2155 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2156 representations for the floating point BITNUM values.
2157
2158Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2159
2160 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2161 in the table in one's complement form, as they appear in the
2162 actual instruction.
2163 (tic80_symbol_to_value): Use macros to access predefined
2164 symbol fields.
2165 (tic80_value_to_symbol): Ditto.
2166 (tic80_next_predefined_symbol): New function.
2167 * tic80-dis.c (print_operand_bitnum): Remove code that did
2168 one's complement for BITNUM values.
2169
2170Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2171
2172 * makefile.vms: Remove 8 bit characters. Update to latest
2173 gcc release.
2174
2175Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2176
2177 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2178
2179Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2180
2181 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2182 (IMM24_PCREL): Likewise.
2183
2184Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2185
2186 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2187 address for an extended PC relative instruction that is not a
2188 branch.
2189
2190Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2191
2192 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2193 bytes_per_line.
2194
2195Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2196
2197 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2198 (tic80_opcodes): Sort entries so that long immediate forms
2199 come after short immediate forms, making it easier for
2200 assembler to select the right one for a given operand.
2201
2202Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2203
2204 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2205 display_endian.
2206 (print_insn_mips16): Likewise.
2207
2208Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2209
2210 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2211 a symbol class that restricts translation to just that
2212 class (general register, condition code, etc).
2213
2214Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2215
2216 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2217 and REG_DEST_E for register operands that have to be
2218 an even numbered register. Add REG_FPA for operands that
2219 are one of the floating point accumulator registers.
2220 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2221 (tic80_opcodes): Change entries that need even numbered
2222 register operands to use the new operand table entries.
2223 Add "or" entries that are identical to "or.tt" entries.
2224
2225Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2226
2227 * mips16-opc.c: Add new cases of exit instruction for
2228 disassembler.
2229 * mips-dis.c (print_mips16_insn_arg): Display floating point
2230 registers in operands of exit instruction. Print `$' before
2231 register names in operands of entry and exit instructions.
2232
2233Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2234
2235 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2236 pairs for all predefined symbols recognized by the assembler.
2237 Also used by the disassembling routines.
2238 (tic80_symbol_to_value): New function.
2239 (tic80_value_to_symbol): New function.
2240 * tic80-dis.c (print_operand_control_register,
2241 print_operand_condition_code, print_operand_bitnum):
2242 Remove private tables and use tic80_value_to_symbol function.
2243
2244Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2245
2246 * d10v-dis.c (print_operand): Change address printing
2247 to correctly handle PC wrapping. Fixes PR11490.
2248
2249Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2250
2251 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2252 branches relaxable.
2253
2254Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2255
2256 * mips-dis.c (print_insn_mips16): Set insn_info information.
2257 (print_mips16_insn_arg): Likewise.
2258
2259 * mips-dis.c (print_insn_mips16): Better handling of an extend
2260 opcode followed by an instruction which can not be extended.
2261
2262Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2263
2264 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2265 coldfire moveb instruction to not allow an address register as
2266 destination. Although the documentation does not indicate that
2267 this is invalid, experiments uncovered unexpected behavior.
2268 Added a comment explaining the situation. Thanks to Andreas
2269 Schwab for pointing this out to me.
2270
2271Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2272
2273 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2274 entries are presorted so that entries with the same mnemonic are
2275 adjacent to each other in the table. Sort the entries for each
2276 instruction so that this is true.
2277
2278Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2279
2280 * m68k-dis.c: Include <libiberty.h>.
2281 (print_insn_m68k): Sort the opcode table on the most significant
2282 nibble of the opcode.
2283
2284Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2285
2286 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2287 "vsub", "vst", "xnor", and "xor" instructions.
2288 (V_a1): Renamed from V_a, msb of accumulator reg number.
2289 (V_a0): Add macro, lsb of accumulator reg number.
2290
2291Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2292
2293 * tic80-dis.c (print_insn_tic80): Broke excessively long
2294 function up into several smaller ones and arranged for
2295 the instruction printing function to be callable recursively
2296 to print vector instructions that have both a load and a
2297 math instruction packed into a single opcode.
2298 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2299 to explain why it comes after the other vector opcodes.
2300
2301Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2302
2303 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2304 move insns to handle immediate operands.
2305
2306Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2307
2308 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2309 fix operand mask in the "moveml" entries for the coldfire.
2310
2311Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2312
2313 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2314 New macros for building vector instruction opcodes.
2315 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2316 FMT_LI, which were unused. The field is now a flags field.
2317 Remove some opcodes that are possible, but illegal, such
2318 as long immediate instructions with doubles for immediate
2319 values. Add "vadd" and "vld" instructions.
2320
2321Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2322
2323 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2324 the order more logical. Move the shift alias instructions ("rotl",
2325 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2326 interspersed with the regular sr.x and sl.x instructions. Add
2327 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2328 "sub", "subu", "swcr", and "trap".
2329
2330Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2331
2332 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2333 (OFF_SL_PC): Renamed from OFF_SL.
2334 (OFF_SS_BR): New operand type for base relative operand.
2335 (OFF_SL_BR): New operand type for base relative operand.
2336 (REG_BASE): New operand type for base register operand.
2337 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2338 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2339 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2340 instructions.
2341 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2342 10 char field, padded with spaces on rhs, rather than a string
2343 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2344 than old TIC80_OPERAND_RELATIVE. Add support for new
2345 TIC80_OPERAND_BASEREL flag bit.
2346
2347Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2348
2349 * tic80-dis.c (print_insn_tic80): Print floating point operands
2350 as floats.
2351 * tic80-opc.c (SPFI): Add single precision floating point
2352 immediate operand type.
2353 (ROTATE): Add rotate operand type for shifts.
2354 (ENDMASK): Add for shifts.
2355 (n): Macro for the 'n' bit.
2356 (i): Macro for the 'i' bit.
2357 (PD): Macro for the 'PD' field.
2358 (P2): Macro for the 'P2' field.
2359 (P1): Macro for the 'P1' field.
2360 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2361 "fcmp", and "fdiv".
2362
2363Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2364
2365 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2366 adding in current address for pc-relative operands.
2367
2368Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2369
2370 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2371 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2372 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2373 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2374 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2375 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2376 (REG_SCALED, LSI_SCALED): New operand types.
2377 (E): New macro for 'E' bit at bit 27.
2378 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2379 opcodes, including the various size flavors (b,h,w,d) for
2380 the direct load and store instructions.
2381
2382Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2383
2384 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2385 in an instruction.
2386 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2387 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2388 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2389 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2390 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2391 masks with "MASK_* & ~M_*" to get the M bit reset.
2392 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2393
2394Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2395
2396 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2397 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2398 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2399 form.
2400 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2401 CC, SICR, and LICR table entries.
2402 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2403 "bcnd", and "brcr" opcodes.
2404
2405Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2406
2407 * ppc-opc.c (powerpc_operands): Make comment match the
2408 actual fields (no shift field).
2409 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2410 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2411 partial implementation, work in progress.
2412 * tic80-opc.c (tic80_operands): Begin construction operands table.
2413 (tic80_opcodes): Continue populating opcodes table and start
2414 filling in the operand indices.
2415 (tic80_num_opcodes): Add this.
2416
2417Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2418
2419 * m68k-opc.c: Add #B case for moveq.
2420
2421Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2422
2423 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2424 before they are used.
2425
2426Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2427
2428 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2429 for "breakpoint" instruction.
2430
2431Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2432
2433 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2434 (dep): Use ALL_CFLAGS rather than CFLAGS.
2435
2436Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2437
2438 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2439 flag.
2440
2441Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2442
2443 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2444 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2445
2446Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2447
2448 * mips16-opc.c: Add "abs".
2449
2450Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2451
2452 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2453 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2454 (disassembler): Add bfd_arch_tic80 support to set disassemble
2455 to print_insn_tic80.
2456 * tic80-dis.c (print_insn_tic80): Add stub.
2457
2458Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2459
2460 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2461 * configure: Regenerate with autoconf.
2462 * tic80-dis.c: Add file.
2463 * tic80-opc.c: Add file.
2464
2465Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2466
2467 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2468
2469Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2470
2471 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2472 (mn10200_opcodes): Use it for some logicals and btst insns.
2473 Add "break" and "trap" instructions.
2474
2475 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2476
2477 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2478
2479Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2480
2481 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2482 relative load or add now depends upon whether the instruction is
2483 in a delay slot.
2484
2485Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2486
2487 * mn10200-dis.c: Finish writing disassembler.
2488 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2489 Fix mask for "jmp (an)".
2490
2491 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2492 handle endianness issues for mn10300.
2493
2494 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2495
2496Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2497
2498 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2499 instruction. Fix opcode field for "movb (imm24),dn".
2500
2501 * mn10200-opc.c (mn10200_operands): Fix insertion position
2502 for DI operand.
2503
2504Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2505
2506 * mn10200-opc.c: Create mn10200 opcode table.
2507 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2508 but moving along nicely.
2509
2510Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2511
2512 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2513
2514Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2515
2516 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2517 specifiers for fmovem* instructions.
2518
2519Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2520
2521 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2522
2523Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2524
2525 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2526 with dsrl.
2527
2528Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2529
2530 * mn10300-opc.c: Add some comments explaining the various
2531 operands and such.
2532
2533 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2534
2535Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2536
2537 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2538 specifiers.
2539
2540 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2541 operand specifiers in fmovm* instructions.
2542
2543Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2544
2545 * ppc-opc.c (insert_li): Give an error if the offset has the two
2546 least significant bits set.
2547
2548Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2549
2550 * mips-dis.c (print_insn_mips16): Separate the instruction from
2551 the arguments with a tab, not a space.
2552
2553Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2554
2555 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2556 register prefix.
2557
2558 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2559 mov am,(imm32,sp).
2560
2561Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2562
2563 * configure: Rebuild with autoconf 2.12.
2564
2565 Add support for mips16 (16 bit MIPS implementation):
2566 * mips16-opc.c: New file.
2567 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2568 (mips16_reg_names): New static array.
2569 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2570 after seeing a 16 bit symbol.
2571 (print_insn_little_mips): Likewise.
2572 (print_insn_mips16): New static function.
2573 (print_mips16_insn_arg): New static function.
2574 * mips-opc.c: Add jalx instruction.
2575 * Makefile.in (mips16-opc.o): New target.
2576 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2577 * configure: Rebuild.
2578
2579Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2580
2581 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2582 operand specifiers in *save, *restore and movem* instructions.
2583
2584 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2585 the coldfire.
2586
2587 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2588 register operands for immediate arithmetic, not, neg, negx, and
2589 set according to condition instructions.
2590
2591 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2592 specifier of the effective-address operand in immediate forms of
2593 arithmetic instructions. The specifier for the immediate operand
2594 notes how and where the constant will be stored.
2595
2596Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2597
2598 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2599 opcode.
2600
2601 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2602 register prefix.
2603
2604 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2605
2606Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2607
2608 * mn10300-dis.c (disassemble): Handle register lists.
2609
2610 * mn10300-opc.c: Fix handling of register list operand for
2611 "call", "ret", and "rets" instructions.
2612
2613 * mn10300-dis.c (disassemble): Print PC-relative and memory
2614 addresses symbolically if possible.
2615 * mn10300-opc.c: Distinguish between absolute memory addresses,
2616 pc-relative offsets & random immediates.
2617
2618 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2619 in 7 byte insns.
2620 (disassemble): Handle SPLIT and EXTENDED operands.
2621
2622Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2623
2624 * mn10300-dis.c: Rough cut at printing some operands.
2625
2626 * mn10300-dis.c: Start working on disassembler support.
2627 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2628
2629 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2630 list.
2631 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2632
2633Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2634
2635 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2636
2637Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2638
2639 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2640 register argument is calls and jmp instructions.
2641
2642Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2643
2644 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2645 getx operand. Fix opcode for mulqu imm,dn.
2646
2647Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2648
2649 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2650 in MN10300_OPERAND_SPLIT operands for how many bits
2651 appear in the basic insn word. Add IMM32_HIGH24,
2652 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2653 (mn10300_opcodes): Use new operands as needed.
2654
2655 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2656 for bset, bclr, btst instructions.
2657 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2658
2659 * mn10300-opc.c (mn10300_operands): Remove many redundant
2660 operands. Update opcode table as appropriate.
2661 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2662 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2663
2664Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2665
2666 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2667 operands (for indexed load/stores). Fix bitpos for DI
2668 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2669 few instructions that insert immediates/displacements in the
2670 middle of the instruction. Add IMM8E for 8 bit immediate in
2671 the extended part of an instruction.
2672 (mn10300_operands): Use new opcodes as appropriate.
2673
2674Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2675
2676 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2677 sequential so the assembler never parallelizes it with
2678 other instructions.
2679
2680Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2681
2682 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2683 a data/address register that appears in register field 0
2684 and register field 1.
2685 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2686
2687Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2688
2689 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2690 standard disassembly.
2691
2692 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2693 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2694 Recategorize PALcode instructions.
2695
2696Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2697
2698 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2699
2700Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2701
2702 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2703 there are no operand types.
2704
2705Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2706
2707 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2708 changed.
2709 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2710
2711Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2712
2713 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2714
2715Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2716
2717 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2718 and sst.w instructions.
2719
2720 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2721 "bCC"instructions).
2722
2723Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2724
2725 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2726 and the arguments.
2727
2728Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2729
2730 * ppc-opc.c (PPCPWR2): Define.
2731 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2732 it.
2733
2734Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2735
2736 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2737 field for movhu instruction.
2738
2739 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2740 cast value to "long" not "signed long" to keep hpux10
2741 compiler quiet.
2742
2743Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2744
2745 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2746 for mov (abs16),DN.
2747
2748 * mn10300-opc.c (FMT*): Remove definitions.
2749
2750 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2751 for shift-by-register opcodes.
2752
2753 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2754 into [AD][MN][01] for encoding the position of the register
2755 in the opcode.
2756
2757Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
2758
2759 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2760 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2761
2762Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
2763
2764 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2765 Fix various typos. Add "PAREN" operand.
2766 (MEM, MEM2): Define.
2767 (mn10300_opcodes): Surround all memory addresses with "PAREN"
2768 operands. Fix several typos.
2769
2770 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2771 changes.
2772
2773Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
2774
2775 * mn10300-opc.c (FMT_XX): Renumber starting at one.
2776 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
2777 at this time.
2778 (mn10300_opcodes): Break opcode format out into its own field.
2779 Update many operand fields to deal with signed vs unsigned
2780 issues. Fix one or two typos in the "mov" instruction
2781 opcode, mask and/or operand fields.
2782
2783Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2784
2785 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
2786 m68851 wasn't reset.
2787
2788Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
2789
2790 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
2791 all opcodes. Very rough cut at operands for all opcodes.
2792
2793 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
2794 opcode table.
2795
2796Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
2797
2798 * mn10200-opc.c, mn10300-opc.c: New files.
2799 * mn10200-dis.c, mn10300-dis.c: New files.
2800 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
2801 * disassemble.c: Break mn10x00 support into 10200 and 10300
2802 support.
2803 * configure.in: Likewise.
2804 * configure: Rebuilt.
2805
2806Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2807
2808 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
2809
2810Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
2811
2812 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
2813 MN10x00 processors.
2814 * disassemble (ARCH_mn10x00): Define.
2815 (disassembler): Handle bfd_arch_mn10x00.
2816 * configure.in: Recognize bfd_mn10x00_arch.
2817 * configure: Rebuilt.
2818
2819Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
2820
2821 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
2822 accordingly. Don't declare functions using op_rtn.
2823
2824Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
2825
2826 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
2827 params to be more standard.
2828 * (disassemble): Print absolute addresses and symbolic names for
2829 branch and jump targets.
2830 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
2831 bit operands.
2832 * (v850_opcodes): Add breakpoint insn.
2833
2834Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
2835
2836 * m68k-opc.c: Move the fmovemx data register cases before the
2837 other cases, so that they get recognized before the data register
2838 does gets treated as a degenerate register list.
2839
2840Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
2841
2842 * mips-opc.c: Add a case for "div" and "divu" with two registers
2843 and a destination of $0.
2844
2845Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
2846
2847 * mips-dis.c (print_insn_arg): Add prototype.
2848 (_print_insn_mips): Ditto.
2849
2850Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
2851
2852 * mips-dis.c (print_insn_arg): Print condition code registers as
2853 $fccN.
2854
2855Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
2856
2857 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
2858
2859Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
2860
2861 * v850-dis.c (disassemble): Make static. Provide prototype.
2862
2863Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
2864
2865 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
2866 in range checks.
2867
2868Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
2869
2870 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
2871 ']' characters into the output stream.
2872 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
2873 Add "memop" field to all opcodes (for the disassembler).
2874 Reorder opcodes so that "nop" comes before "mov" and "jr"
2875 comes before "jarl".
2876
2877 * v850-dis.c (print_insn_v850): Fix typo in last change.
2878
2879 * v850-dis.c (print_insn_v850): Properly handle disassembling
2880 a two byte insn at the end of a memory region when the memory
2881 region's size is only two byte aligned.
2882
2883 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
2884
2885 * v850-dis.c (v850_reg_names): Define.
2886 (v850_sreg_names, v850_cc_names): Likewise.
2887 (disassemble): Very rough cut at printing operands (unformatted).
2888
2889 * v850-opc.c (BOP_MASK): Fix.
2890 (v850_opcodes): Fix mask for jarl and jr.
2891
2892 * v850-dis.c: New file. Skeleton for disassembler support.
2893 * Makefile.in Remove v850 references, they're not needed here.
2894 * configure.in: Add v850-dis.o when building v850 toolchains.
2895 * configure: Rebuilt.
2896 * disassemble.c (disassembler): Call v850 disassembler.
2897
2898 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
2899 (insert_d8_6, extract_d8_6): New functions.
2900 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
2901 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
2902 Add D8_6.
2903 (IF4A, IF4B): Use "D7" instead of "D7S".
2904 (IF4C, IF4D): Use "D8_7" instead of "D8".
2905 (IF4E, IF4F): New. Use "D8_6".
2906 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
2907 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
2908
2909 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
2910 (v850_operands): Change D16 to D16_15, use special insert/extract
2911 routines. New new D16 that uses the generic insert/extract code.
2912 (IF7A, IF7B): Use D16_15.
2913 (IF7C, IF7D): New. Use D16.
2914 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
2915
2916 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
2917 message. Issue an error if the branch offset is odd.
2918
2919 * v850-opc.c: Add notes about needing special insert/extract
2920 for all the load/store insns, except "ld.b" and "st.b".
2921
2922 * v850-opc.c (insert_d22, extract_d22): New functions.
2923 (v850_operands): Use insert_d22 and extract_d22 for
2924 D22 operands.
2925 (insert_d9): Fix range check.
2926
2927Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2928
2929 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
2930 and set bits field to D9 and D22 operands.
2931
2932Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
2933
2934 * v850-opc.c (v850_operands): Define SR2 operand.
2935 (v850_opcodes): "ldsr" uses R1,SR2.
2936
2937 * v850-opc.c (v850_opcodes): Fix opcode specs for
2938 sld.w, sst.b, sst.h, sst.w, and nop.
2939
2940Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
2941
2942 * v850-opc.c (v850_opcodes): Add null opcode to mark the
2943 end of the opcode table.
2944
2945Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2946
2947 * d10v-opc.c (pre_defined_registers): Added register pairs,
2948 "r0-r1", "r2-r3", etc.
2949
2950Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
2951
2952 * v850-opc.c (v850_operands): Make I16 be a signed operand.
2953 Create I16U for an unsigned 16bit mmediate operand.
2954 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
2955
2956 * v850-opc.c (v850_operands): Define EP operand.
2957 (IF4A, IF4B, IF4C, IF4D): Use EP.
2958
2959 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
2960 with immediate operand, "movhi". Tweak "ldsr".
2961
2962 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
2963 correct. Get sld.[bhw] and sst.[bhw] closer.
2964
2965 * v850-opc.c (v850_operands): "not" is a two byte insn
2966
2967 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
2968
2969 * v850-opc.c (v850_operands): D16 inserts at offset 16!
2970
2971 * v850-opc.c (two): Get order of words correct.
2972
2973 * v850-opc.c (v850_operands): I16 inserts at offset 16!
2974
2975 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
2976 register source and destination operands.
2977 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
2978
2979 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
2980 same thinko in "trap" opcode.
2981
2982 * v850-opc.c (v850_opcodes): Add initializer for size field
2983 on all opcodes.
2984
2985 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
2986 Add D8 for 8-bit unsigned field in short load/store insns.
2987 (IF4A, IF4D): These both need two registers.
2988 (IF4C, IF4D): Define. Use 8-bit unsigned field.
2989 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
2990 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
2991 for "ldsr" and "stsr".
2992 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
2993 is unsigned.
2994
2995 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
2996 short store word (sst.w).
2997
2998Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2999
3000 * v850-opc.c (v850_operands): Added insert and extract fields,
3001 pointers to functions that handle unusual operand encodings.
3002
3003Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3004
3005 * v850-opc.c (v850_opcodes): Enable "trap".
3006
3007 * v850-opc.c (v850_opcodes): Fix order of displacement
3008 and register for "set1", "clr1", "not1", and "tst1".
3009
3010Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3011
3012 * v850-opc.c (v850_operands): Add "B3" support.
3013 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3014 and "tst1".
3015
3016 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3017
3018 * v850-opc.c: Close unterminated comment.
3019
3020Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3021
3022 * v850-opc.c (v850_operands): Add flags field.
3023 (v850_opcodes): add move opcodes.
3024
3025Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3026
3027 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3028 * configure: (bfd_v850v_arch) Add new case.
3029 * configure.in: (bfd_v850_arch) Add new case.
3030 * v850-opc.c: New file.
3031
3032Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3033
3034 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3035
3036Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3037
3038 * d10v-opc.c: Add additional information to the opcode
3039 table to help determinine which instructions can be done
3040 in parallel.
3041
3042Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3043
3044 * mpw-make.sed: Update editing of include pathnames to be
3045 more general.
3046
3047Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3048
3049 * arm-opc.h: Added "bx" instruction definition.
3050
3051Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3052
3053 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3054
3055Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3056
3057 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3058
3059Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3060
3061 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3062
3063Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3064
3065 * makefile.vms: Update for alpha-opc changes.
3066
3067Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3068
3069 * i386-dis.c (print_insn_i386): Actually return the correct value.
3070 (ONE, OP_ONE): #ifdef out; not used.
3071
3072Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3073
3074 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3075 Changed subi operand type to treat 0 as 16.
3076
3077Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3078
3079 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3080 <rose@netcom.com>.
3081
3082Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3083
3084 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3085 memory transfer instructions. Add new format string entries %h and %s.
3086 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3087 formats %h and %s.
3088
3089Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3090
3091 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3092 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3093
3094Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3095
3096 * alpha-dis.c (print_insn_alpha_osf): Remove.
3097 (print_insn_alpha_vms): Remove.
3098 (print_insn_alpha): Make globally visible. Chose the register
3099 names based on info->flavour.
3100 * disassemble.c: Always return print_insn_alpha for the alpha.
3101
3102Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3103
3104 * d10v-dis.c (dis_long): Handle unknown opcodes.
3105
3106Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3107
3108 * d10v-opc.c: Changes to support signed and unsigned numbers.
3109 All instructions with the same name that have long and short forms
3110 now end in ".l" or ".s". Divs added.
3111 * d10v-dis.c: Changes to support signed and unsigned numbers.
3112
3113Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3114
3115 * d10v-dis.c: Change all functions to use info->print_address_func.
3116
3117Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3118
3119 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3120 move ccr/sr insns more strict so that the disassembler only
3121 selects them when the addressing mode is data register.
3122
3123Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3124 * d10v-opc.c (pre_defined_registers): Declare.
3125 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3126 to pick a better name for the registers.
3127
3128Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3129
3130 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3131 operands for fexpand and fpmerge. From Christian Kuehnke
3132 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3133
3134Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3135
3136 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3137 print routine. Take new regnames and cpumask arguments.
3138 Kill the environment variable nonsense.
3139 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3140 (print_insn_alpha_vms): New function. Do VMS style regnames.
3141 * disassemble.c (disassembler): Test bfd flavour to pick
3142 between OSF and VMS routines. Default to OSF.
3143
3144Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3145
3146 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3147 * configure: Rebuild.
3148 * Makefile.in (install): Use @INSTALL_SHLIB@.
3149
3150Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3151
3152 * configure: (bfd_d10v_arch) Add new case.
3153 * configure.in: (bfd_d10v_arch) Add new case.
3154 * d10v-dis.c: New file.
3155 * d10v-opc.c: New file.
3156 * disassemble.c (disassembler) Add entry for d10v.
3157
3158Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3159
3160 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3161 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3162
3163Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3164
3165 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3166 distinguish between variants of the instruction set.
3167 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3168 distinguish between variants of the instruction set.
3169
3170Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3171
3172 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3173 the 8086 instruction set.
3174 * i386-dis.c: General cleanups. Make most things static. Add
3175 prototypes. Get rid of static variables aflags and dflags. Pass
3176 them as args (to almost everything).
3177
3178Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3179
3180 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3181
3182 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3183
3184 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3185 if the next arg is marked with SRC_IN_DST. Gross.
3186
3187 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3188 we're looking for and find EXR.
3189
3190 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3191 if we're looking for KBIT and we don't find it.
3192
3193 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3194 for L_3 and L_2.
3195
3196 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3197 3bit immediate operands.
3198
3199Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3200
3201 * Released binutils 2.7.
3202
3203 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3204 <kkaempf@progis.ac-net.de>.
3205
3206Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3207
3208 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3209
3210Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3211
3212 * sparc-dis.c (print_insn_sparclite): New routine to print
3213 sparclite instructions.
3214
3215Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3216
3217 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3218
3219Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3220
3221 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3222 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3223 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3224
3225Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3226
3227 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3228 Use autoconf-set values.
3229 (docdir, oldincludedir): Removed.
3230 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3231
3232Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3233
3234 * alpha-opc.c: New file.
3235 * alpha-opc.h: Remove.
3236 * alpha-dis.c: Complete rewrite to use new opcode table.
3237 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3238 * configure: Rebuild with autoconf 2.10.
3239 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3240 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3241 alpha-opc.h.
3242 (alpha-opc.o): New target.
3243
3244Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3245
3246 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3247 Set imm_added_to_rs1 even if the source and destination register
3248 are not the same.
3249
3250 * sparc-opc.c: Add some two operand forms of the wr instruction.
3251
3252Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3253
3254 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3255 to just "mode".
3256
3257 * disassemble.c (disassembler): Handle H8/S.
3258 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3259
3260Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3261
3262 * sparc-opc.c: Add beq/teq as aliases for be/te.
3263
3264 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3265 <sergei@msil.sps.mot.com>.
3266
3267Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3268
3269 * makefile.vms: New file.
3270
3271 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3272
3273Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3274
3275 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3276 regardless of plen.
3277
3278Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3279
3280 * i386-dis.c (OP_OFF): Call append_prefix.
3281
3282Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3283
3284 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3285 unsigned long to silence a warning from the Solaris PowerPC
3286 compiler.
3287
3288Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3289
3290 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3291
3292Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3293
3294 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3295 (X_IMM13): Delete.
3296 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3297 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3298 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3299 cpush, cpusha, cpull sparclet insns.
3300
3301Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3302
3303 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3304
3305Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3306
3307 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3308 Set F_FLOAT on other floating point instructions.
3309
3310Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3311
3312 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3313 registers.
3314 (powerpc_opcodes): Add 860/821 specific SPRs.
3315
3316Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3317
3318 * configure.in: Permit --enable-shared to specify a list of
3319 directories. Set and substitute BFD_PICLIST.
3320 * configure: Rebuild.
3321 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3322 uses. Set to @BFD_PICLIST@.
3323
3324Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3325
3326 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3327 not "abs", which may be needed for the absolute in something
3328 like btst #0,@10:8. Print L_3 immediates separately from other
3329 immediates. Change ABSMOV reference to ABS8MEM.
3330
3331Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3332
3333 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3334 (current_arch_mask): New static global.
3335 (compute_arch_mask): New static function.
3336 (print_insn_sparc): Delete sparc_v9_p. New static local
3337 current_mach. Resort opcode table if current_mach changes.
3338 Generalize "insn not supported" test.
3339 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3340 Delete test for v9/!v9.
3341 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3342 (v6notlet): Define.
3343 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3344 (brfcx): Renamed to FBRX.
3345 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3346 coprocessor mnemonics are not supported on the sparclet).
3347 (condf): Renamed to CONDF.
3348 (SLCBCC2): Delete F_ALIAS flag.
3349
3350Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3351
3352 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3353 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3354
3355Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3356
3357 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3358 that the shared library version number is set correctly.
3359
3360Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3361
3362 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3363 Miles Bader <miles@gnu.ai.mit.edu>.
3364 * configure: Rebuild.
3365
3366Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3367
3368 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3369 malloc.
3370
3371Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3372
3373 * configure: Rebuild with autoconf 2.8.
3374
3375Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3376
3377 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3378 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3379
3380Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3381
3382 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3383 since they appear as targets in Makefile.in.
3384 * configure: Rebuild.
3385
3386Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3387
3388 * mpw-make.sed: Edit out shared library support bits.
3389
3390Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3391
3392 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3393 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3394 (sparc_opcodes): Add sparclet insns.
3395 (sparclet_cpreg_table): New static local.
3396 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3397 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3398
3399Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3400
3401 * i386-dis.c (index16): New static variable.
3402 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3403 other way around.
3404 (OP_indirE): Return result of OP_E.
3405 (OP_E): Check for 16 bit addressing mode, and disassemble
3406 correctly. Optimised 32 bit case a little. Don't print
3407 "(base,index,scale)" when sib specifies only an offset.
3408
3409Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3410
3411 * configure.in: Set and substitute SHLIB_DEP.
3412 * configure: Rebuild.
3413 * Makefile.in (SHLIB_DEP): New variable.
3414 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3415 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3416 COMMON_SHLIB, add them to piclist with appropriate modifications.
3417 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3418 here: just use piclist.
3419
3420Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3421
3422 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3423 (print_insn_sparc): Rewrite v9/not-v9 tests.
3424 (compare_opcodes): Likewise.
3425 * sparc-opc.c (MASK_<ARCH>): Define.
3426 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3427 (sparclet,v6notv9): Define.
3428 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3429 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3430
3431Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3432
3433 * configure.in: Call AC_PROG_CC before configure.host.
3434 * configure: Rebuild.
3435
3436 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3437
3438Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3439
3440 * i386-dis.c (onebyte_has_modrm): New static array.
3441 (twobyte_has_modrm): New static array.
3442 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3443
3444Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3445
3446 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3447 $(SHLINK).
3448
3449Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3450
3451 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3452 doesn't conflict.
3453
3454Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3455
3456 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3457 m68010up, not just m68020up | cpu32.
3458
3459 * Makefile.in (SONAME): New variable.
3460 ($(SHLINK)): Make a link to the transformed name, as well.
3461 (stamp-tshlink): New target.
3462 (install): Skip stamp-tshlink during install.
3463
3464Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3465
3466 * configure.in: Call AC_ARG_PROGRAM.
3467 * configure: Rebuild.
3468 * Makefile.in (program_transform_name): New variable.
3469 (install): Transform library name before installing it.
3470
3471Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3472
3473 * i960-dis.c (mem): Add HX dcinva instruction.
3474
3475 Support for building as a shared library, based on patches from
3476 Alan Modra <alan@spri.levels.unisa.edu.au>:
3477 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3478 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3479 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3480 * configure: Rebuild.
3481 * Makefile.in (ALLLIBS): New variable.
3482 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3483 (COMMON_SHLIB, SHLINK): New variables.
3484 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3485 (STAGESTUFF): Remove variable.
3486 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3487 (stamp-piclist, piclist): New targets.
3488 ($(SHLIB), $(SHLINK)): New targets.
3489 ($(OFILES)): Depend upon stamp-picdir.
3490 (disassemble.o): Build twice if PICFLAG is set.
3491 (MOSTLYCLEAN): Add pic/*.o.
3492 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3493 (distclean): Remove pic and stamp-picdir.
3494 (install): Install shared libraries.
3495 (stamp-picdir): New target.
3496
3497Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3498
3499 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3500 Print unknown instruction as "unknown", rather than in hex.
3501
3502Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3503
3504 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3505
3506Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3507
3508 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3509
3510Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3511
3512 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3513 when necessary. From Ulrich Drepper
3514 <drepper@myware.rz.uni-karlsruhe.de>.
3515
3516Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3517
3518 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3519 sparc_num_opcodes. Update architecture enum values.
3520 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3521 (sparc_opcode_lookup_arch): New function.
3522 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3523 (sparc_opcodes): Add v9a shutdown insn.
3524
3525Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3526
3527 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3528 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3529 architecture.
3530 (print_insn_sparc64): Deleted.
3531 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3532 print_insn_sparc.
3533
3534 * sparc-opc.c (architecture_pname): Add v9a.
3535
3536Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3537
3538 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3539 incorrectly defined as 0x16 when it should be 0x15.
3540 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3541 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3542 excb (exception barrier) which is defined in the Alpha
3543 Architecture Handbook version 2.
3544 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3545 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3546 disassembled as or, for example.
3547
3548Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3549
3550 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3551 (_print_insn_mips): Change i from int to unsigned int.
3552
3553Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3554
3555 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3556 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3557
3558Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3559
3560 * i386-dis.c: Added Pentium Pro instructions.
3561
3562Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3563
3564 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3565 being for Power2.
3566
3567Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3568
3569 * sh-opc.h (sh_nibble_type): Added REG_B.
3570 (sh_arg_type): Added A_REG_B.
3571 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3572 and stc.l opcodes.
3573 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3574
3575Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3576
3577 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3578
3579Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3580
3581 * Makefile.in (distclean): Remove stamp-h. From Ronald
3582 F. Guilmette <rfg@monkeys.com>.
3583
3584Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3585
3586 From David Mosberger-Tang <davidm@azstarnet.com>:
3587 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3588 instruction.
3589
3590Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3591
3592 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3593 (sh_table): Added many SH3 opcodes.
3594 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3595
3596Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3597
3598 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3599 (subco,subco.): Mark this PPC, not PPCCOM.
3600
3601Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3602
3603 * configure: Rebuild with autoconf 2.7.
3604
3605Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3606
3607 * configure: Rebuild with autoconf 2.6.
3608
3609Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3610
3611 * configure.in: Sort list of architectures. Accept but do nothing
3612 for alliant, convex, pyramid, romp, and tahoe.
3613
3614Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3615
3616 * a29k-dis.c (print_special): Change num to unsigned int.
3617
3618Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3619
3620 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3621 shifting it.
3622
3623Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3624
3625 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3626 * configure: Rebuilt.
3627
3628Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3629
3630 * configure.in: Add case for bfd_i860_arch.
3631 * configure: Rebuild.
3632
3633Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3634
3635 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3636 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3637 (NEXTDOUBLE): Likewise.
3638 (print_insn_m68k): Don't match fmoveml if there is more than one
3639 register in the list.
3640 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3641
3642Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3643
3644 * m68k-opc.c: Use #W rather than #w.
3645 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3646
3647Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3648
3649 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3650 and likewise for all the dbxx opcodes.
3651
3652Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3653
3654 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3655
3656Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3657
3658 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3659 the VR4100 specific instructions to the mips_opcodes structure.
3660
3661Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3662
3663 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3664 ugly Metrowerks bug in CW6, is fixed in CW7.
3665
3666Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3667
3668 * ppc-opc.c (whole file): Add flags for common/any support.
3669
3670Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3671
3672 * Makefile.in (BISON): Remove macro.
3673 (FLAGS_TO_PASS): Remove BISON.
3674
3675Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3676
3677 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3678
3679 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3680 instructions that take no args by looking at the match mask.
3681 (print_insn_arg): Always print "%" before register names.
3682 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3683 [case '_']: Don't print "@#" before address.
3684 [case 'J']: Use "%s" as format string, not register name.
3685 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3686
3687Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3688
3689 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3690 name correctly.
3691
3692Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3693
3694 From David Mosberger-Tang <davidm@azstarnet.com>
3695
3696 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3697 (alpha_insn_set): added definitions for VAX floating point
3698 instructions (Unix compilers don't generate these, but handcoded
3699 assembly might still use them).
3700
3701 * alpha-dis.c (print_insn_alpha): added support for disassembling
3702 the miscellaneous instructions in the Alpha instruction set.
3703
3704Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3705
3706 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3707 no longer create sysdep.h, sed ppc-opc.c to work around a
3708 serious Metrowerks C bug.
3709 * mpw-make.in: Remove.
3710 * mpw-make.sed: New file, used by mpw-configure to edit
3711 Makefile.in into an MPW makefile.
3712
3713Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3714
3715 * Makefile.in (maintainer-clean): New synonym for realclean.
3716
3717Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3718
3719 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3720 which use '0', '1', and '2' instead. Specify the proper size for
3721 a pmove immediate operand. Correct the pmovefd patterns to be
3722 moves to a register, not from a register.
3723 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3724
3725Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3726
3727 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3728 %psr, %wim, %tbr as F_NOTV9.
3729
3730Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3731
3732 * Makefile.in (Makefile): Just rebuild Makefile when running
3733 config.status.
3734 (config.h, stamp-h): New targets.
3735 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3736 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3737 rebuilding config.h.
3738 * configure: Rebuild.
3739
3740 * mips-opc.c: Change unaligned loads and stores with "t,A"
3741 operands to use "t,A(b)".
3742
3743Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3744
3745 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3746
3747Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3748
3749 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3750 until 3 instead of until 2.
3751
3752Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
3753
3754 * Makefile.in (ALL_CFLAGS): Define.
3755 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3756 (MOSTLYCLEAN): Add config.log.
3757 (distclean): Don't remove config.log.
3758 * configure.in: Substitute HDEFINES.
3759 * configure: Rebuild.
3760
3761Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3762
3763 * sh-opc.h (sh_arg_type): Add F_FR0.
3764 (sh_table, case fmac): Add F_FR0 as first argument.
3765
3766Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3767
3768 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3769
3770Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
3771
3772 * sparc-dis.c: Remove all references to NO_V9.
3773
3774Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
3775
3776 * aclocal.m4: Just include ../bfd/aclocal.m4.
3777 * configure: Rebuild.
3778
3779Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
3780
3781 * sparc-dis.c (X_DISP19): Define.
3782 (print_insn, case 'G'): Use it.
3783 (print_insn, case 'L'): Sign extend displacement.
3784
3785Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
3786
3787 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
3788 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
3789 host_makefile_frag or frags.
3790 * aclocal.m4: New file.
3791 * configure: Rebuild.
3792 * Makefile.in (INSTALL): Set to @INSTALL@.
3793 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
3794 (INSTALL_DATA): Set to @INSTALL_DATA@.
3795 (AR): Set to @AR@.
3796 (AR_FLAGS): Set to rc rather than qc.
3797 (CC): Define as @CC@.
3798 (CFLAGS): Set to @CFLAGS@.
3799 (@host_makefile_frag@): Remove.
3800 (config.status): Remove dependency upon @frags@.
3801
3802 * configure.in: ../bfd/config.bfd now just sets shell variables.
3803 Use them rather than looking through target Makefile fragments.
3804 * configure: Rebuild.
3805
3806Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3807
3808 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
3809
3810Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
3811
3812 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
3813 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
3814 sparc64 insns.
3815
3816 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
3817 (lookup_{name,value}): New functions.
3818 (prefetch_table): New static local.
3819 (sparc_{encode,decode}_prefetch): New functions.
3820 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
3821
3822Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3823
3824 * sh-opc.h: Add blank lines to improve readabililty of sh3e
3825 instructions.
3826
3827Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3828
3829 * sh-dis.c: Correct comment on first line of file.
3830
3831Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
3832
3833 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
3834
3835 * sparc-opc.c (asi, membar): New static locals.
3836 (sparc_{encode,decode}_{asi,membar}): New functions.
3837 (sparc_opcodes, membar insn): Fix.
3838 * sparc-dis.c (print_insn): Call sparc_decode_asi.
3839 Support decoding of membar masks.
3840 (X_MEMBAR): Define.
3841
3842Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
3843
3844 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
3845
3846Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
3847
3848 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
3849 and likewise for the other branches. Add bhs as an alias for bcc,
3850 and likewise for the size variants. Add dbhs as an alias for
3851 dbcc.
3852
3853Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
3854
3855 * sh-opc.h (FP sts instructions): Update to match reality.
3856
3857Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
3858
3859 * m68k-dis.c: (fpcr_names): Add % before all register names.
3860 (reg_names): Likewise.
3861 (print_insn_arg): Don't explicitly print % before register names.
3862 Add % before register names in static array names. In case 'r',
3863 print data registers as `@(Dn)', not `Dn@'. When printing a
3864 memory address, don't print @# before it.
3865 (print_indexed): Change base_disp and outer_disp from int to
3866 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
3867 syntax. Sign extend 8 byte displacement correctly.
3868 (print_base): Print using MIT syntax. Print zpc when appropriate.
3869 Change parameter disp from int to bfd_vma.
3870
3871 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
3872 for jsr.
3873
3874Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
3875
3876 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
3877 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
3878 * sh-opc.h (sh_arg_type): Add new operand types.
3879 (sh_table): Add new opcodes from SH3E Floating Point ISA.
3880
3881Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3882
3883 * Makefile.in (distclean): Remove generated file config.h.
3884
3885Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3886
3887 * Makefile.in (distclean): Remove generated file config.h.
3888
3889Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
3890
3891 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
3892 Clean up tables.
3893 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
3894 (opcode): Remove.
3895 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
3896 rather than numopcodes. Use m68k_opcodes rather than removed
3897 opcode function. Don't check F_ALIAS.
3898 (print_insn_arg): Change first parameter to be const char *.
3899 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
3900 (m68k-opc.o): New target.
3901 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
3902 * configure: Rebuild.
3903
3904Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
3905
3906 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
3907 (opcode_bits, opcode_hash_table): New variables.
3908 (opcodes_initialized): Renamed from opcodes_sorted.
3909 (build_hash_table): New function.
3910 (is_delayed_branch): Use hash table.
3911 (print_insn): Renamed from print_insn_sparc, made static.
3912 Build and use hash table. If !sparc64, ignore sparc64 insns,
3913 and vice-versa if sparc64.
3914 (print_insn_sparc, print_insn_sparc64): New functions.
3915 (compare_opcodes): Move sparc64 opcodes to end.
3916 Print commutative insns with constant second.
3917 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
3918
3919Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
3920
3921 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
3922 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
3923 avoids printing a delay slot in a delay slot.
3924 * sh-opc.h (sh_table): Fully bracket last entry.
3925
3926Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
3927
3928 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
3929
3930Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
3931
3932 * configure.in: Get host_makefile_frag from ${srcdir}.
3933
3934 * configure.in: Autoconfiscated. Check for string[s].h. Create
3935 config.h from config.in. Don't set up sysdep.h link.
3936 * sysdep.h: New file.
3937 * configure, config.in: New files, generated from configure.in.
3938 * Makefile.in: Updated to be processed autoconf-style.
3939 (distclean): Keep sysdep.h. Remove config.log and config.cache.
3940 (Makefile): Depend on config.status.
3941 (config.status): New rule.
3942 * configure.bat: Update Makefile substitutions.
3943
3944Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
3945
3946 * mips-opc.c (L1): Define.
3947 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
3948 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
3949 and wb.
3950
3951Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
3952
3953 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
3954 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
3955 have multiple add units but only a single logical unit.
3956
3957 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
3958 shifted by 18, without any insertion or extraction function.
3959 (insert_cr, extract_cr): Remove.
3960
3961Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3962
3963 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
3964 register names.
3965
3966Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
3967
3968 * mpw-config.in: Add sh and i386 configs, remove sparc config.
3969 * sh-opc.h: Add copyright.
3970
3971Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
3972
3973 * Makefile.in (crunch-m68k): Delete extra target accidentally
3974 checked in a while ago.
3975
3976Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3977
3978 * sh-opc.h (sh_table): Add SH3 support.
3979
3980Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
3981
3982 * sh-opc.h: Added bsrf and braf.
3983
3984Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
3985
3986 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
3987 bogus [ls]fm{ea,fd} patterns.
3988
3989 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
3990 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
3991 initialize it from memory. Make function static.
3992 (print_insn_{big,little}_arm): New functions.
3993 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
3994 the correct endianness.
3995
3996Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
3997
3998 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
3999 enum list.
4000
4001Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4002
4003 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4004 17th, so that it builds again using GCC as the compiler.
4005
4006Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4007
4008 * mips-dis.c (print_insn_little_mips): Cast return value from
4009 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4010 expects an unsigned long, and that might be fewer words of
4011 argument storage (e.g., if bfd_vma is long long on a 32-bit
4012 machine).
4013 (print_insn_big_mips): Likewise with bfd_getb32 value.
4014 (_print_insn_mips): Now static.
4015
4016Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4017
4018 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4019 gcc memory hog problem with initializer is fixed.
4020
4021Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4022
4023 Merge in support for Mac MPW as a host.
4024 (Old change descriptions retained for informational value.)
4025
4026 * mpw-config.in (archname): Compute from the config.
4027 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4028
4029 * mpw-config.in (target_arch): Compute from canonical target.
4030 (m68k, mips, powerpc, sparc): Add architectures.
4031 * mpw-make.in (disassemble.c.o): Add.
4032 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4033
4034 * mpw-config.in (BFD_MACHINES): Set to a default value.
4035 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4036
4037 * mpw-make.in (CSEARCH): Add extra-include to search path.
4038
4039 * mpw-config.in (varargs.h): Don't create.
4040 (sysdep.h): Create using forward-include.
4041 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4042
4043 * mpw-config.in: New file, MPW version of configure.in.
4044 * mpw-make.in: New file, MPW version of Makefile.in.
4045
4046Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4047
4048 * alpha-dis.c (print_insn_alpha): Put empty statement after
4049 default label.
4050
4051Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4052
4053 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4054 (low_sign_extend): Likewise.
4055 (get_field): Delete unused function.
4056 (set_field, deposit_14, deposit_21): Likewise.
4057
4058Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4059
4060 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4061 (guy@netapp.com).
4062
4063Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4064
4065 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4066
4067 * alpha-opc.h (OSF_ASMCODE): define
4068 print pal-code names as defined in App C of the
4069 Alpha Architecture Reference Manual
4070
4071 * alpha-dis.c: cleaned up output
4072 print stylized code forms as defined in App A.4.3 of the
4073 Alpha Architecture Reference Manual
4074
4075Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4076
4077 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4078 `rfe'.
4079 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4080 'N', and 'M'.
4081
4082Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4083
4084 * m68k-dis.c (opcode): New function. Returns address of opcode
4085 table entry given index, even if the opcode table was split to
4086 work around gcc bugs.
4087 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4088 directly.
4089 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4090 (reg_names): Now const.
4091 (print_insn_arg): Arrays cacheFieldName and names now const.
4092 (print_indexed): Array scales now const.
4093
4094Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4095
4096 * ppc-opc.c: Sort recently added instructions by minor opcode
4097 number within major opcode number.
4098
4099Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4100
4101 * hppa-dis.c: Include libhppa.h.
4102
4103Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4104
4105 * mips-opc.c: Change dli to use M_DLI, and add dla.
4106
4107Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4108
4109 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4110
4111Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4112
4113 * mips-opc.c: Add r4650 mul instruction.
4114
4115Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4116
4117 * mips-opc.c: Add uld and usd macros for unaligned double load and
4118 store.
4119
4120Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4121
4122 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4123 mfdcr, mtdcr, icbt, iccci.
4124
4125Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4126
4127 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4128 signed char fields to shorts, more portable.
4129
4130Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4131
4132 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4133 char fields as signed chars, since they may have negative values.
4134
4135Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4136
4137 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4138 (mycroft@netbsd.org).
4139
4140Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4141
4142 From "Logg, Ed" <elogg@ea.com>:
4143 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4144 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4145 value.
4146
4147Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4148
4149 * ppc-opc.c: Changes based on patch from David Edelsohn
4150 <edelsohn@mhpcc.edu>.
4151 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4152 SPR.
4153 (FXM_MASK): Define.
4154 (insert_tbr): New static function.
4155 (extract_tbr): New static function.
4156 (XFXFXM_MASK, XFXM): Define.
4157 (XSPRBAT_MASK, XSPRG_MASK): Define.
4158 (powerpc_opcodes): Add instructions to access special registers by
4159 name. Add mtcr and mftbu.
4160
4161Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4162
4163 * mips-opc.c (P3): Define.
4164 (mips_opcodes): Add mad and madu.
4165
4166Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4167
4168 * configure.in: Add W65 support.
4169 * disassemble.c: Likewise.
4170 * w65-opc.h, w65-dis.c: New files.
4171
4172Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4173
4174 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4175 immediates.
4176
4177Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4178
4179 * mips-opc.c: Add dli as a synonym for li.
4180
4181Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4182
4183 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4184 print something for reserved opcode values, even if it won't
4185 assemble again.
4186
4187 * mips-dis.c (_print_insn_mips): When initializing, shift right
4188 and mask, to avoid sign extension problems on the Alpha.
4189
4190 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4191 control registers.
4192
4193Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4194
4195 * sh-opc.h (mov.l gbr): Get direction right.
4196 * sh-dis.c (print_insn_shx): New function.
4197 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4198 print opcodes with right byte order.
4199
4200Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4201
4202 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4203 to avoid conflicts with getopt.
4204
4205Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4206
4207 * hppa-dis.c (print_insn_hppa): Read the instruction using
4208 bfd_getb32, so that it works on a little endian or 64 bit host.
4209 Remove unused local variable op.
4210
4211Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4212
4213 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4214 addu does not work correctly if -mips3.
4215
4216Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4217
4218 * a29k-dis.c (print_special): Add special register names defined
4219 on 29030, 29040 and 29050.
4220 (print_insn): Handle new operand type 'I'.
4221
4222Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4223
4224 * Makefile.in (INSTALL): Use top level install.sh script.
4225
4226Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4227
4228 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4229 that it works on a little endian host.
4230
4231Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4232
4233 * configure.in: Use ${config_shell} when running config.bfd.
4234
4235Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4236
4237 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4238
4239Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4240
4241 * a29k-dis.c (print_insn): Print the opcode.
4242
4243Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4244
4245 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4246
4247Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4248
4249 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4250
4251Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4252
4253 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4254 which store a value into memory.
4255
4256Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4257
4258 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4259 * arm-dis.c, arm-opc.h: New files.
4260
4261Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4262
4263 * Makefile.in (ns32k-dis.o): Add dependency.
4264 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4265 string, not as array of chars.
4266
4267Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4268
4269 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4270
4271 * sparc-opc.c: Added sparclite extended FP operations, and
4272 versions of v9 impdep* instructions permitting specification of
4273 the OPF field.
4274
4275Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4276
4277 * i960-dis.c (reg_names): Now const.
4278 (struct sparse_tabent): New type, copied from array type in mem
4279 function.
4280 (ctrl): Local static array ctrl_tab now const.
4281 (cobr): Local static array cobr_tab now const.
4282 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4283 static variable mem_tab no longer explicitly initialized. Changed
4284 mem_init to const array of struct sparse_tabent.
4285 (reg): Local static variable reg_tab no longer explicitly
4286 initialized. Changed reg_init to const array of struct
4287 sparse_tabent.
4288 (ea): Local static array scale_tab now const.
4289
4290 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4291 (REG_MAX): Updated.
4292
4293Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4294
4295 * configure.bat: the disassember needs to be enabled for
4296 "objdump -d" to work in djgpp.
4297
4298Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4299
4300 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4301 (invalid_float): Enabled general version, doesn't require running
4302 on ns32k host. Changed to take char* argument, and test for
4303 explicitly specified sizes, instead of using sizeof() on host CPU
4304 types.
4305 (INVALID_FLOAT): Cast first argument.
4306 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4307 list_P032, list_M032): Now const.
4308 (optlist, list_search): Made appropriate arguments now point to
4309 const.
4310 (print_insn_arg): Changed static array of one-character-string
4311 pointers into a static const array of characters; fixed sprintf
4312 statement accordingly.
4313
4314Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4315
4316 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4317 from distribution. A ns32k-dis.c from a previous distribution has
4318 been brought up to date and supports the new interface.
4319
4320 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4321
4322 * configure.in: add bfd_ns32k_arch target support.
4323
4324 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4325 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4326
4327Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4328
4329 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4330 disassembly right.
4331
4332Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4333
4334 * h8300-dis.c, mips-dis.c: Don't use true and false.
4335
4336Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4337
4338 * configure.in: Change --with-targets to --enable-targets.
4339
4340Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4341
4342 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4343 opcodes to the first instruction with that opcode, to speed
4344 disassembly of large files. From ralphc@pyramid.com (Ralph
4345 Campbell).
4346
4347Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4348
4349 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4350
4351Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4352
4353 * configure.bat: update to latest makefile.in
4354
4355Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4356
4357 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4358 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4359 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4360 slot insn is in a delay slot.
4361 * z8k-opc.h: (resflg): Fix patterns.
4362 * h8500-opc.h Fix CR insn patterns.
4363
4364Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4365
4366 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4367 "cmpl" before POWER versions, so that gas -many uses them.
4368
4369Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4370
4371 * disassemble.c: New file.
4372 * Makefile.in (OFILES): Add disassemble.o.
4373 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4374 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4375 binutils/configure.in.
4376
4377 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4378 opcode being examined.
4379
4380Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4381
4382 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4383 (insert_ral, insert_ram, insert_ras): New functions.
4384 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4385 RAS for store with update.
4386
4387Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4388
4389 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4390 (edelsohn@npac.syr.edu).
4391
4392Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4393
4394 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4395 immediate argument.
4396
4397Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4398
4399 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4400
4401Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4402
4403 * ppc-opc.c (powerpc_operands): The signedp field has been
4404 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4405 instead. Add new operand SISIGNOPT.
4406 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4407 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4408 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4409 than signedp field.
4410
4411Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4412
4413 * i386-dis.c (struct private): Renamed to dis_private. `private'
4414 is a reserved word for dynix cc.
4415
4416Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4417
4418 * configure.in: Change error message to refer to bfd/config.bfd
4419 rather than bfd/configure.in.
4420
4421Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4422
4423 * ppc-opc.c: Define POWER2 as short alias flag.
4424 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4425 fsqrt.
4426
4427Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4428
4429 * i960-dis.c (print_insn_i960): Don't read a second word for
4430 opcodes 0, 1, 2 and 3.
4431
4432Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4433
4434 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4435
4436Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4437
4438 * m68881-ext.c: Removed; no longer used.
4439 * Makefile.in: Changed accordingly.
4440
4441 * m68k-dis.c (ext_format_68881): Don't declare.
4442 (print_insn_m68k): If an instruction uses place 'i', it uses at
4443 least four fixed bytes.
4444 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4445 extended float, convert to double using floatformat_to_double, not
4446 ieee_extended_to_double, and fetch the data before converting it.
4447
4448Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4449
4450 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4451 davidj@ICSI.Berkeley.EDU (David Johnson).
4452
4453Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4454
4455 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4456 PowerPC uses bdnz[l][a].
4457
4458Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4459
4460 * dis-buf.c, i386-dis.c: Include sysdep.h.
4461
4462Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4463
4464 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4465
4466 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4467 by Motorola PowerPC 601 with PPC_OPCODE_601.
4468 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4469 Disassemble Motorola PowerPC 601 instructions as well as normal
4470 PowerPC instructions.
4471
4472Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4473
4474 * i960-dis.c (reg, mem): Just use a static array instead of
4475 calling xmalloc.
4476
4477Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4478
4479 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4480 condition name index if this is for a negated condition.
4481
4482 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4483 Floating point format for 'H' operand is backwards from normal
4484 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4485 operands (fmpyadd and fmpysub), handle bizarre register
4486 translation correctly for single precision format.
4487
4488 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4489 or 'I' operands if the next format specifier is 'M' (fcmp
4490 condition completer).
4491
4492Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4493
4494 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4495 single number giving a bitmask for the MB and ME fields of an M
4496 form instruction. Change NB to accept 32, and turn it into 0;
4497 also turn 0 into 32 when disassembling. Seperated SH from NB.
4498 (insert_mbe, extract_mbe): New functions.
4499 (insert_nb, extract_nb): New functions.
4500 (SC_MASK): Mask out SA and LK bits.
4501 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4502 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4503 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4504 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4505 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4506 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4507 (powerpc_macros): Define table of macro definitions.
4508 (powerpc_num_macros): Define.
4509
4510 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4511 if PPC_OPERAND_NEXT is set.
4512
4513Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4514
4515 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4516 char. Retrieve contents using bfd_getl32 instead of shifting.
4517
4518Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4519
4520 * ppc-opc.c: New file. Opcode table for PowerPC, including
4521 opcodes for POWER (RS/6000).
4522 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4523 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4524 (CFILES): Add ppc-dis.c.
4525 (ppc-dis.o, ppc-opc.o): New targets.
4526 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4527
4528Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4529
4530 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4531 No space before 'u', 'f', or 'N'.
4532
4533Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4534
4535 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4536 farther than we should.
4537
4538 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4539
4540Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4541
4542 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4543
4544Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4545
4546 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4547 needs it, to prevent reading past the end of a section.
4548
4549Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4550
4551 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4552 Removed t,A case for la; always use t,A(b) case.
4553
4554Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4555
4556 From Ted Lemen <mellon@pepper.ncd.com>
4557 * mips-dis.c (print_insn_arg): Handle 'k'.
4558 * mips-opc.c: Make cache use k, not t.
4559
4560Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4561
4562 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4563 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4564 FLOAT_FORMAT_CODE to put out floating point register names.
4565
4566Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4567
4568 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4569
4570Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4571
4572 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4573
4574Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4575
4576 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4577 larger than 32. Moved dsxx32 variants first for disassembler.
4578
4579Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4580
4581 * z8kgen.c, z8k-opc.h: Add full lda information.
4582
4583Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4584
4585 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4586 movb instructions. Any necessary space will be emitted by
4587 the code to handle nullification completers.
4588
4589Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4590
4591 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4592
4593Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4594
4595 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4596 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4597
4598Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4599
4600 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4601
4602Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4603
4604 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4605 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4606
4607Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4608
4609 * m88k-dis.c (m88kdis): comment change. Remove space after
4610 printing mnemonic.
4611 (printop): handle new arg types DEC and XREG for m88110.
4612
4613Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4614
4615 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4616 type for absolute branch addresses. Delete special
4617 "ble" and "be" code in 'W' operand code.
4618
4619Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4620
4621 * mips-opc.c: Set hazard information correctly for branch
4622 likely instructions.
4623
4624Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4625
4626 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4627 info->fprintf_func for printing and info->print_address_func for
4628 address output.
4629
4630Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4631
4632 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4633
4634Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4635
4636 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4637 Corrected second case of "b" for disassembler.
4638
4639Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4640
4641 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4642 to BFD swapping routines to correspond to BFD name changes.
4643
4644Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4645
4646 * mips-opc.c: Change div machine instruction to be z,s,t rather
4647 than s,t. Change div macro to be d,v,t rather than d,s,t.
4648 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4649 rem and remu which generates only the corresponding div
4650 instruction. This is for compatibility with the MIPS assembler,
4651 which only generates the simple machine instruction when an
4652 explicit destination of $0 is used.
4653 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4654
4655Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4656
4657 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4658 WR_31 hazard for bal, bgezal, bltzal.
4659
4660Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4661
4662 * hppa-dis.c (print_insn_hppa): Use print function
4663 from within the disassemble_info, not fprintf_filtered.
4664
4665Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4666
4667 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4668 Law, law@cs.utah.edu.)
4669
4670Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4671
4672 * mips-opc.c ("absu"): Removed.
4673 ("dabs"): Added.
4674
4675Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4676
4677 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4678 Changed hazard information to distinguish between memory load
4679 delays and coprocessor load delays.
4680
4681Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4682
4683 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4684
4685Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4686
4687 * configure.in: Don't pass cpu to config.bfd.
4688
4689Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4690
4691 * m88k-dis.c (m88kdis): Make class unsigned.
4692
4693Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4694
4695 * alpha-dis.c (print_insn_alpha): One branch format case was
4696 missing the instruction name.
4697
4698Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4699
4700 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4701 Add the arch-specific auxiliary files.
4702 (OFILES): Remove the arch-specific auxiliary files
4703 and use BFD_MACHINES instead of DIS_LIBS.
4704 * configure.in: Set BFD_MACHINES based on --with-targets option.
4705
4706Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4707
4708 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4709 for swc1.
4710
4711Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4712
4713 * sparc-opc.c: Change CONST to const to deal with gcc
4714 -Dconst=__const -traditional.
4715
4716Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4717
4718 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4719 coprocessor instructions out of #if 0, and made them use new
4720 argument type "C".
4721
4722Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4723
4724 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4725
4726Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4727
4728 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4729 instruction, for use by the disassembler.
4730
4731 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4732 hand-coded sign extensions that depended on 32-bit host ints.
4733 FIXME, we still depend on big-endian host bitfield ordering.
4734 (sparc_print_insn): Set the insn_info_valid field, and the
4735 other fields that describe the instruction being printed.
4736
4737Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4738
4739 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4740 `jmp' instead of just one of them.
4741
4742Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4743
4744 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4745 (fput_fp_reg_r): Renamed from fput_reg_r.
4746 (fput_fp_reg): New function.
4747 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4748
4749 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4750
4751 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4752
4753Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4754
4755 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4756
4757 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4758 don't output a space.
4759
4760 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4761
4762Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
4763
4764 * mips-opc.c: New file, containing opcode table from
4765 ../include/opcode/mips.h.
4766 * Makefile.in: Add it.
4767
4768Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4769
4770 * m88k-dis.c: New file, moved in from gdb and changed to use the
4771 new dis-asm.h disassembler interface.
4772 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4773 (m88k-dis.o): New target.
4774
4775Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
4776
4777 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4778 argument string const char * to correspond to opcode/mips.h.
4779
4780Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
4781
4782 * mips-dis.c: Updated to account for name changes in new version
4783 of opcode/mips.h.
4784 * Makefile.in: Added header file dependencies.
4785
4786Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
4787
4788 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
4789
4790Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4791
4792 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
4793 extend, rather than shifts.
4794
4795Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
4796
4797 * Makefile.in: Undo 15 June change.
4798
4799Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
4800
4801 * m68k-dis.c (print_insn_arg): Change return value to byte count
4802 or error code.
4803 * m68k-dis.c: Re-write to detect invalid operands before
4804 printing anything, so we can handle this the same way we
4805 handle invalid opcodes.
4806
4807Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4808
4809 * sh-dis.c, sh-opc.h: Understand some more opcodes.
4810
4811Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
4812
4813 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
4814 header files.
4815
4816Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4817
4818 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
4819
4820 * configure.in: Do make sysdep.h link.
4821 * Makefile.in: Search ../include. Don't search ../bfd.
4822
4823Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
4824
4825 Changes from Jeff Law, law@cs.utah.edu:
4826 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
4827 Do not print a space before the completers specified by
4828 'a' and 'd'.
4829
4830Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
4831
4832 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
4833 defined, since gdb has been fixed.
4834
4835 Changes from Jeff Law, law@cs.utah.edu:
4836 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
4837 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
4838 be a *disassemble_info, not a *FILE.
4839 * hppa-dis.c: Support 'd', '!', and 'a'.
4840 * hppa-dis.c: Support 's' to extract a 2 bit space register.
4841 * hppa-dis.c: Delete cases which are no longer needed.
4842
4843Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
4844
4845 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
4846
4847Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4848
4849 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
4850 H8/300-H opcodes.
4851
4852Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
4853
4854 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
4855 * configure.in: No longer need to configure to get sysdep.h.
4856
4857Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
4858
4859 * Patches from Jeffrey Law <law@cs.utah.edu>.
4860 * hppa-dis.c: Support 'I', 'J', and 'K' in output
4861 templates for 1.1 FP computational instructions.
4862
4863Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4864
4865 * h8500-dis.c (print_insn_h8500): Address argument is type
4866 bfd_vma.
4867 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
4868 Ditto.
4869
4870 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
4871 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
4872
4873 * sparc-dis.c (compare_opcodes): Move static declaration to
4874 top-level.
4875
4876Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4877
4878 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
4879 instruction, remove unimp hack from 'l' argument.
4880
4881Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
4882
4883 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
4884 happy.
4885
4886Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
4887
4888 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
4889 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
4890 instructions.
4891
4892Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4893
4894 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
4895 arrays of string pointers to 2-d arrays of chars, to save
4896 space.
4897
4898Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
4899
4900 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
4901 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
4902
4903Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4904
4905 * hppa-dis.c: New file from Utah, adapted to new disassembler
4906 calling interface.
4907 * Makefile.in: Include it.
4908
4909Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4910
4911 * sh-dis.c, sh-opc.h: New files.
4912
4913Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4914
4915 * alpha-dis.c, alpha-opc.h: New files.
4916
4917Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4918
4919 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
4920 value.
4921
4922Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
4923
4924 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
4925
4926Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
4927
4928 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
4929 const.
4930
4931Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
4932
4933 * sparc-dis.c: Use fprintf_func a few places where I forgot,
4934 and double percent signs a few places.
4935
4936 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
4937
4938 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
4939 Use info->print_address_func not print_address.
4940
4941 * dis-buf.c (generic_print_address): New function.
4942
4943Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4944
4945 * Makefile.in: Add sparc-dis.c.
4946 sparc-dis.c: New file, merges binutils and gdb versions as follows:
4947 From GDB:
4948 Add `add' instruction to the set that get checked
4949 for a preceding `sethi' in order to print an absolute address.
4950 * (print_insn): Disassembly prefers real instructions.
4951 (is_delayed_branch): Speed up.
4952 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
4953 Still missing some float ops, and needs testing.
4954 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
4955 F_ALIAS. Use printf, not fprintf, when not passing a file
4956 pointer...
4957 (compare_opcodes): Check that identical instructions have
4958 identical opcodes, complain otherwise.
4959 From binutils:
4960 * New 'm' arg.
4961 * Include reg_names.
4962 From neither:
4963 Use dis-asm.h/read_memory_func interface.
4964
4965Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
4966
4967 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
4968 deliberately return non-zero to setjmp from longjmp. Otherwise
4969 this code fails to compile.
4970
4971Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
4972
4973 * m68k-dis.c: Fix prototype for fetch_arg().
4974
4975Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4976
4977 * dis-buf.c: New file, for new read_memory_func interface.
4978 Makefile.in (OFILES): Include it.
4979 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
4980 Use new read_memory_func interface.
4981
4982Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4983
4984 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
4985 * h8500-opc.h: Fix couple of opcodes.
4986
4987Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
4988
4989 * Makefile.in: add dvi & installcheck targets
4990
4991Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
4992
4993 * Makefile.in: Update for h8500-dis.c.
4994
4995Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4996
4997 * h8500-dis.c, h8500-opc.h: New files
4998
4999Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5000
5001 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5002 ../include/dis-asm.h.
5003 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5004 and ../gdb/m68k-pinsn.c).
5005 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5006 and ../gdb/i386-pinsn.c).
5007 * m68881-ext.c: New file. Moved definition of
5008 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5009 * Makefile.in: Adjust for new files.
5010 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5011 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5012 can be dis-assembled.
5013
5014Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5015
5016 * mips-dis.c (print_insn_arg): Now returns void.
5017
5018Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5019
5020 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5021 files that use the macros.
5022
5023Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5024
5025 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5026 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5027 (CFILES): Added mips-dis.c.
5028
5029Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5030
5031 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5032 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5033
5034Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5035
5036 * Makefile.in: Improve *clean rules.
5037 * configure.in: Allow a default host.
5038
5039Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5040
5041 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5042 files include other sysdep files
5043
5044Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5045
5046 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5047
5048Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5049
5050 * configure.in: For host support, use ../bfd/configure.host
5051 so it stays in sync with the ../bfd/hosts database.
5052
5053Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5054
5055 * configure.in: use cpu-vendor-os triple instead of nested cases
5056
5057Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5058
5059 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5060 *always* the wrong one.
5061
5062Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5063
5064 * z8kgen.c: added copyright info
5065
5066Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5067
5068 * z8k-dis.c (unparse_instr): prettier tabs
5069 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5070
5071Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5072
5073 * configure.in: Add ncr* configuration.
5074 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5075 picayune ANSI compilers happy.
5076
5077Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5078
5079 * configure.in (i386): Make i386 and i486 synonymous for now.
5080 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5081
5082Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5083
5084 * Makefile.in (install): Fix typo.
5085
5086Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5087
5088 * Makefile.in (make): Remove obsolete crud.
5089 (sparc-opc.o): Avoid Sun Make VPATH bug.
5090
5091Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5092
5093 * Makefile.in: since there are no SUBDIRS, remove rule and
5094 references of subdir_do.
5095
5096Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5097
5098 * Makefile.in (install): Get the library name right here too.
5099 Don't install bfd.h, since it's unrelated to this library. No
5100 subdirs to recurse into, either.
5101 (CFILES): The source file has a .c suffix, not .o.
5102
5103 * sparc-opc.c: New file, moved from BFD.
5104 * Makefile.in (OFILES): Build it.
5105
5106Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5107
5108 * z8k-dis.c: fixed forward refferences of some declarations.
5109
5110Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5111
5112 * Makefile.in: get the name of the library right
5113
5114Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5115
5116 * z8k-dis.c: knows how to disassemble z8k stuff
5117 * z8k-opc.h: new file full of z8000 opcodes
5118
5119\f
5120Local Variables:
5121version-control: never
5122End:
GDB Binutils - Deliverables
This page took 0.234642 seconds and 4 git commands to generate.