Commit | Line | Data |
---|---|---|
42048ee7 TL |
1 | 2004-11-05 Tomer Levi <Tomer.Levi@nsc.com> |
2 | ||
3 | * crx-opc.c (crx_optab): Rename 'arg_icr' to 'arg_idxr' for Index register | |
4 | mode. | |
5 | * crx-dis.c: Likewise. | |
6 | ||
bd21e58e HPN |
7 | 2004-11-04 Hans-Peter Nilsson <hp@axis.com> |
8 | ||
9 | Generally, handle CRISv32. | |
10 | * cris-dis.c (TRACE_CASE): Define as (disdata->trace_case). | |
11 | (struct cris_disasm_data): New type. | |
12 | (format_reg, format_hex, cris_constraint, print_flags) | |
13 | (get_opcode_entry): Add struct cris_disasm_data * parameter. All | |
14 | callers changed. | |
15 | (format_sup_reg, print_insn_crisv32_with_register_prefix) | |
16 | (print_insn_crisv32_without_register_prefix) | |
17 | (print_insn_crisv10_v32_with_register_prefix) | |
18 | (print_insn_crisv10_v32_without_register_prefix) | |
19 | (cris_parse_disassembler_options): New functions. | |
20 | (bytes_to_skip, cris_spec_reg): Add enum cris_disass_family | |
21 | parameter. All callers changed. | |
22 | (get_opcode_entry): Call malloc, not xmalloc. Return NULL on | |
23 | failure. | |
24 | (cris_constraint) <case 'Y', 'U'>: New cases. | |
25 | (bytes_to_skip): Handle 'Y' and 'N' as 's'. Skip size is 4 bytes | |
26 | for constraint 'n'. | |
27 | (print_with_operands) <case 'Y'>: New case. | |
28 | (print_with_operands) <case 'T', 'A', '[', ']', 'd', 'n', 'u'> | |
29 | <case 'N', 'Y', 'Q'>: New cases. | |
30 | (print_insn_cris_generic): Emit "bcc ." for zero and CRISv32. | |
31 | (print_insn_cris_with_register_prefix) | |
32 | (print_insn_cris_without_register_prefix): Call | |
33 | cris_parse_disassembler_options. | |
34 | * cris-opc.c (cris_spec_regs): Mention that this table isn't used | |
35 | for CRISv32 and the size of immediate operands. New v32-only | |
36 | entries for bz, pid, srs, wz, exs, eda, dz, ebp, erp, nrp, ccs and | |
37 | spc. Add v32-only 4-byte entries for p2, p3, p5 and p6. Change | |
38 | ccr, ibr, irp to be v0..v10. Change bar, dccr to be v8..v10. | |
39 | Change brp to be v3..v10. | |
40 | (cris_support_regs): New vector. | |
41 | (cris_opcodes): Update head comment. New format characters '[', | |
42 | ']', space, 'A', 'd', 'N', 'n', 'Q', 'T', 'u', 'U', 'Y'. | |
43 | Add new opcodes for v32 and adjust existing opcodes to accommodate | |
44 | differences to earlier variants. | |
45 | (cris_cond15s): New vector. | |
46 | ||
9306ca4a JB |
47 | 2004-11-04 Jan Beulich <jbeulich@novell.com> |
48 | ||
49 | * i386-dis.c (Eq, Edqw, indirEp, Gdq, I1): Define. | |
50 | (indirEb): Remove. | |
51 | (Mp): Use f_mode rather than none at all. | |
52 | (t_mode, dq_mode, dqw_mode, f_mode, const_1_mode): Define. t_mode | |
53 | replaces what previously was x_mode; x_mode now means 128-bit SSE | |
54 | operands. | |
55 | (dis386): Make far jumps and calls have an 'l' prefix only in AT&T | |
56 | mode. movmskpX's, pextrw's, and pmovmskb's first operands are Gdq. | |
57 | pinsrw's second operand is Edqw. | |
58 | (grps): 1-bit shifts' and rotates' second operands are I1. cmpxchg8b's | |
59 | operand is Eq. movntq's and movntdq's first operands are EM. s[gi]dt, | |
60 | fldenv, frstor, fsave, fstenv all should also have suffixes in Intel | |
61 | mode when an operand size override is present or always suffixing. | |
62 | More instructions will need to be added to this group. | |
63 | (putop): Handle new macro chars 'C' (short/long suffix selector), | |
64 | 'I' (Intel mode override for following macro char), and 'J' (for | |
65 | adding the 'l' prefix to far branches in AT&T mode). When an | |
66 | alternative was specified in the template, honor macro character when | |
67 | specified for Intel mode. | |
68 | (OP_E): Handle new *_mode values. Correct pointer specifications for | |
69 | memory operands. Consolidate output of index register. | |
70 | (OP_G): Handle new *_mode values. | |
71 | (OP_I): Handle const_1_mode. | |
72 | (OP_ESreg, OP_DSreg): Generate pointer specifications. Indicate | |
73 | respective opcode prefix bits have been consumed. | |
74 | (OP_EM, OP_EX): Provide some default handling for generating pointer | |
75 | specifications. | |
76 | ||
f39c96a9 TL |
77 | 2004-10-28 Tomer Levi <Tomer.Levi@nsc.com> |
78 | ||
79 | * crx-opc.c (REV_COP_INST): New macro, reverse operand order of | |
80 | COP_INST macro. | |
81 | ||
812337be TL |
82 | 2004-10-27 Tomer Levi <Tomer.Levi@nsc.com> |
83 | ||
84 | * crx-dis.c (enum REG_ARG_TYPE): New, replacing COP_ARG_TYPE. | |
85 | (getregliststring): Support HI/LO and user registers. | |
86 | * crx-opc.c (crx_instruction): Update data structure according to the | |
87 | rearrangement done in CRX opcode header file. | |
88 | (crx_regtab): Likewise. | |
89 | (crx_optab): Likewise. | |
90 | (crx_instruction): Reorder load/stor instructions, remove unsupported | |
91 | formats. | |
92 | support new Co-Processor instruction 'cpi'. | |
93 | ||
4030fa5a NC |
94 | 2004-10-27 Nick Clifton <nickc@redhat.com> |
95 | ||
96 | * opcodes/iq2000-asm.c: Regenerate. | |
97 | * opcodes/iq2000-desc.c: Regenerate. | |
98 | * opcodes/iq2000-desc.h: Regenerate. | |
99 | * opcodes/iq2000-dis.c: Regenerate. | |
100 | * opcodes/iq2000-ibld.c: Regenerate. | |
101 | * opcodes/iq2000-opc.c: Regenerate. | |
102 | * opcodes/iq2000-opc.h: Regenerate. | |
103 | ||
fc3d45e8 TL |
104 | 2004-10-21 Tomer Levi <Tomer.Levi@nsc.com> |
105 | ||
106 | * crx-opc.c (crx_instruction): Replace i3, i4, i5 with us3, | |
107 | us4, us5 (respectively). | |
108 | Remove unsupported 'popa' instruction. | |
109 | Reverse operands order in store co-processor instructions. | |
110 | ||
3c55da70 AM |
111 | 2004-10-15 Alan Modra <amodra@bigpond.net.au> |
112 | ||
113 | * Makefile.am: Run "make dep-am" | |
114 | * Makefile.in: Regenerate. | |
115 | ||
7fa3d080 BW |
116 | 2004-10-12 Bob Wilson <bob.wilson@acm.org> |
117 | ||
118 | * xtensa-dis.c: Use ISO C90 formatting. | |
119 | ||
e612bb4d AM |
120 | 2004-10-09 Alan Modra <amodra@bigpond.net.au> |
121 | ||
122 | * ppc-opc.c: Revert 2004-09-09 change. | |
123 | ||
43cd72b9 BW |
124 | 2004-10-07 Bob Wilson <bob.wilson@acm.org> |
125 | ||
126 | * xtensa-dis.c (state_names): Delete. | |
127 | (fetch_data): Use xtensa_isa_maxlength. | |
128 | (print_xtensa_operand): Replace operand parameter with opcode/operand | |
129 | pair. Remove print_sr_name parameter. Use new xtensa-isa.h functions. | |
130 | (print_insn_xtensa): Use new xtensa-isa.h functions. Handle multislot | |
131 | instruction bundles. Use xmalloc instead of malloc. | |
132 | ||
bbac1f2a NC |
133 | 2004-10-07 David Gibson <david@gibson.dropbear.id.au> |
134 | ||
135 | * ppc-opc.c: Replace literal "0"s with NULLs in pointer | |
136 | initializers. | |
137 | ||
48c9f030 NC |
138 | 2004-10-07 Tomer Levi <Tomer.Levi@nsc.com> |
139 | ||
140 | * crx-opc.c (crx_instruction): Support Co-processor insns. | |
141 | * crx-dis.c (COP_ARG_TYPE): New enum for CO-Processor arguments. | |
142 | (getregliststring): Change function to use the above enum. | |
143 | (print_arg): Handle CO-Processor insns. | |
144 | (crx_cinvs): Add 'b' option to invalidate the branch-target | |
145 | cache. | |
146 | ||
12c64a4e AH |
147 | 2004-10-06 Aldy Hernandez <aldyh@redhat.com> |
148 | ||
149 | * ppc-opc.c (powerpc_opcodes): Add efscfd, efdabs, efdnabs, | |
150 | efdneg, efdadd, efdsub, efdmul, efddiv, efdcmpgt, efdcmplt, | |
151 | efdcmpeq, efdtstgt, efdtstlt, efdtsteq, efdcfsi, efdcfsid, | |
152 | efdcfui, efdcfuid, efdcfsf, efdcfuf, efdctsi, efdctsidz, efdctsiz, | |
153 | efdctui, efdctuidz, efdctuiz, efdctsf, efdctuf, efdctuf, efdcfs. | |
154 | ||
14127cc4 NC |
155 | 2004-10-01 Bill Farmer <Bill@the-farmers.freeserve.co.uk> |
156 | ||
157 | * pdp11-dis.c (print_insn_pdp11): Subtract the SOB's displacement | |
158 | rather than add it. | |
159 | ||
0dd132b6 NC |
160 | 2004-09-30 Paul Brook <paul@codesourcery.com> |
161 | ||
162 | * arm-dis.c (print_insn_arm): Handle 'e' for SMI instruction. | |
163 | * arm-opc.h: Document %e. Add ARMv6ZK instructions. | |
164 | ||
3f85e526 L |
165 | 2004-09-17 H.J. Lu <hongjiu.lu@intel.com> |
166 | ||
167 | * Makefile.am (AUTOMAKE_OPTIONS): Require 1.9. | |
168 | (CONFIG_STATUS_DEPENDENCIES): New. | |
169 | (Makefile): Removed. | |
170 | (config.status): Likewise. | |
171 | * Makefile.in: Regenerated. | |
172 | ||
8ae85421 AM |
173 | 2004-09-17 Alan Modra <amodra@bigpond.net.au> |
174 | ||
175 | * Makefile.am: Run "make dep-am". | |
176 | * Makefile.in: Regenerate. | |
177 | * aclocal.m4: Regenerate. | |
178 | * configure: Regenerate. | |
179 | * po/POTFILES.in: Regenerate. | |
180 | * po/opcodes.pot: Regenerate. | |
181 | ||
24443139 AS |
182 | 2004-09-11 Andreas Schwab <schwab@suse.de> |
183 | ||
184 | * configure: Rebuild. | |
185 | ||
2a309db0 AM |
186 | 2004-09-09 Segher Boessenkool <segher@kernel.crashing.org> |
187 | ||
188 | * ppc-opc.c (L): Make this field not optional. | |
189 | ||
42851540 NC |
190 | 2004-09-03 Tomer Levi <Tomer.Levi@nsc.com> |
191 | ||
192 | * opc-crx.c: Rename 'popma' to 'popa', remove 'pushma'. | |
193 | Fix parameter to 'm[t|f]csr' insns. | |
194 | ||
979273e3 NN |
195 | 2004-08-30 Nathanael Nerode <neroden@gcc.gnu.org> |
196 | ||
197 | * configure.in: Autoupdate to autoconf 2.59. | |
198 | * aclocal.m4: Rebuild with aclocal 1.4p6. | |
199 | * configure: Rebuild with autoconf 2.59. | |
200 | * Makefile.in: Rebuild with automake 1.4p6 (picking up | |
201 | bfd changes for autoconf 2.59 on the way). | |
202 | * config.in: Rebuild with autoheader 2.59. | |
203 | ||
ac28a1cb RS |
204 | 2004-08-27 Richard Sandiford <rsandifo@redhat.com> |
205 | ||
206 | * frv-desc.[ch], frv-opc.[ch]: Regenerated. | |
207 | ||
30d1c836 ML |
208 | 2004-07-30 Michal Ludvig <mludvig@suse.cz> |
209 | ||
210 | * i386-dis.c (GRPPADLCK): Renamed to GRPPADLCK1 | |
211 | (GRPPADLCK2): New define. | |
212 | (twobyte_has_modrm): True for 0xA6. | |
213 | (grps): GRPPADLCK2 for opcode 0xA6. | |
214 | ||
0b0ac059 AO |
215 | 2004-07-29 Alexandre Oliva <aoliva@redhat.com> |
216 | ||
217 | Introduce SH2a support. | |
218 | * sh-opc.h (arch_sh2a_base): Renumber. | |
219 | (arch_sh2a_nofpu_base): Remove. | |
220 | (arch_sh_base_mask): Adjust. | |
221 | (arch_opann_mask): New. | |
222 | (arch_sh2a, arch_sh2a_nofpu): Adjust. | |
223 | (arch_sh2a_up, arch_sh2a_nofpu_up): Likewise. | |
224 | (sh_table): Adjust whitespace. | |
225 | 2004-02-24 Corinna Vinschen <vinschen@redhat.com> | |
226 | * sh-opc.h (arch_sh2a_nofpu_up): New. Use instead of arch_sh2a_up in | |
227 | instruction list throughout. | |
228 | (arch_sh2a_up): Redefine to include fpu instruction set. Use instead | |
229 | of arch_sh2a in instruction list throughout. | |
230 | (arch_sh2e_up): Accomodate above changes. | |
231 | (arch_sh2_up): Ditto. | |
232 | 2004-02-20 Corinna Vinschen <vinschen@redhat.com> | |
233 | * sh-opc.h: Add arch_sh2a_nofpu to arch_sh2_up. | |
234 | 2004-02-18 Corinna Vinschen <vinschen@redhat.com> | |
235 | * sh-dis.c (print_insn_sh): Add bfd_mach_sh2a_nofpu handling. | |
236 | * sh-opc.h (arch_sh2a_nofpu): New. | |
237 | (arch_sh2a_up): New, defines sh2a and sh2a_nofpu. | |
238 | (sh_table): Change all arch_sh2a to arch_sh2a_up unless FPU | |
239 | instruction. | |
240 | 2004-01-20 DJ Delorie <dj@redhat.com> | |
241 | * sh-dis.c (print_insn_sh): SH2A does not have 'X' fp regs. | |
242 | 2003-12-29 DJ Delorie <dj@redhat.com> | |
243 | * sh-opc.c (sh_nibble_type, sh_arg_type, arch_2a, arch_2e_up, | |
244 | sh_opcode_info, sh_table): Add sh2a support. | |
245 | (arch_op32): New, to tag 32-bit opcodes. | |
246 | * sh-dis.c (print_insn_sh): Support sh2a opcodes. | |
247 | 2003-12-02 Michael Snyder <msnyder@redhat.com> | |
248 | * sh-opc.h (arch_sh2a): Add. | |
249 | * sh-dis.c (arch_sh2a): Handle. | |
250 | * sh-opc.h (arch_sh2_up): Fix up to include arch_sh2a. | |
251 | ||
670ec21d NC |
252 | 2004-07-27 Tomer Levi <Tomer.Levi@nsc.com> |
253 | ||
254 | * crx-opc.c: Add popx,pushx insns. Indent code, fix comments. | |
255 | ||
ed049af3 NC |
256 | 2004-07-22 Nick Clifton <nickc@redhat.com> |
257 | ||
258 | PR/280 | |
259 | * h8300-dis.c (bfd_h8_disassemble): Do not dump raw bytes for the | |
260 | insns - this is done by objdump itself. | |
261 | * h8500-dis.c (print_insn_h8500): Likewise. | |
262 | ||
20f0a1fc NC |
263 | 2004-07-21 Jan Beulich <jbeulich@novell.com> |
264 | ||
265 | * i386-dis.c (OP_E): Show rip-relative addressing in 64-bit mode | |
266 | regardless of address size prefix in effect. | |
267 | (ptr_reg): Size or address registers does not depend on rex64, but | |
268 | on the presence of an address size override. | |
269 | (OP_MMX): Use rex.x only for xmm registers. | |
270 | (OP_EM): Use rex.z only for xmm registers. | |
271 | ||
6f14957b MR |
272 | 2004-07-20 Maciej W. Rozycki <macro@linux-mips.org> |
273 | ||
274 | * mips-opc.c (mips_builtin_opcodes): Move coprocessor 2 | |
275 | move/branch operations to the bottom so that VR5400 multimedia | |
276 | instructions take precedence in disassembly. | |
277 | ||
1586d91e MR |
278 | 2004-07-20 Maciej W. Rozycki <macro@linux-mips.org> |
279 | ||
280 | * mips-opc.c (mips_builtin_opcodes): Remove the MIPS32 | |
281 | ISA-specific "break" encoding. | |
282 | ||
982de27a NC |
283 | 2004-07-13 Elvis Chiang <elvisfb@gmail.com> |
284 | ||
285 | * arm-opc.h: Fix typo in comment. | |
286 | ||
4300ab10 AS |
287 | 2004-07-11 Andreas Schwab <schwab@suse.de> |
288 | ||
289 | * m68k-dis.c (m68k_valid_ea): Fix typos in last change. | |
290 | ||
8577e690 AS |
291 | 2004-07-09 Andreas Schwab <schwab@suse.de> |
292 | ||
293 | * m68k-dis.c (m68k_valid_ea): Check validity of all codes. | |
294 | ||
1fe1f39c NC |
295 | 2004-07-07 Tomer Levi <Tomer.Levi@nsc.com> |
296 | ||
297 | * Makefile.am (CFILES): Add crx-dis.c, crx-opc.c. | |
298 | (ALL_MACHINES): Add crx-dis.lo, crx-opc.lo. | |
299 | (crx-dis.lo): New target. | |
300 | (crx-opc.lo): Likewise. | |
301 | * Makefile.in: Regenerate. | |
302 | * configure.in: Handle bfd_crx_arch. | |
303 | * configure: Regenerate. | |
304 | * crx-dis.c: New file. | |
305 | * crx-opc.c: New file. | |
306 | * disassemble.c (ARCH_crx): Define. | |
307 | (disassembler): Handle ARCH_crx. | |
308 | ||
7a33b495 JW |
309 | 2004-06-29 James E Wilson <wilson@specifixinc.com> |
310 | ||
311 | * ia64-opc-a.c (ia64_opcodes_a): Delete mov immediate pseudo for adds. | |
312 | * ia64-asmtab.c: Regnerate. | |
313 | ||
98e69875 AM |
314 | 2004-06-28 Alan Modra <amodra@bigpond.net.au> |
315 | ||
316 | * ppc-opc.c (insert_fxm): Handle mfocrf and mtocrf. | |
317 | (extract_fxm): Don't test dialect. | |
318 | (XFXFXM_MASK): Include the power4 bit. | |
319 | (XFXM): Add p4 param. | |
320 | (powerpc_opcodes): Add mfocrf and mtocrf. Adjust mtcr. | |
321 | ||
a53b85e2 AO |
322 | 2004-06-27 Alexandre Oliva <aoliva@redhat.com> |
323 | ||
324 | 2003-07-21 Richard Sandiford <rsandifo@redhat.com> | |
325 | * disassemble.c (disassembler): Handle bfd_mach_h8300sxn. | |
326 | ||
d0618d1c AM |
327 | 2004-06-26 Alan Modra <amodra@bigpond.net.au> |
328 | ||
329 | * ppc-opc.c (BH, XLBH_MASK): Define. | |
330 | (powerpc_opcodes): Allow BH field on bclr, bclrl, bcctr, bcctrl. | |
331 | ||
1d9f512f AM |
332 | 2004-06-24 Alan Modra <amodra@bigpond.net.au> |
333 | ||
334 | * i386-dis.c (x_mode): Comment. | |
335 | (two_source_ops): File scope. | |
336 | (float_mem): Correct fisttpll and fistpll. | |
337 | (float_mem_mode): New table. | |
338 | (dofloat): Use it. | |
339 | (OP_E): Correct intel mode PTR output. | |
340 | (ptr_reg): Use open_char and close_char. | |
341 | (PNI_Fixup): Handle possible suffix on sidt. Use op1out etc. for | |
342 | operands. Set two_source_ops. | |
343 | ||
52886d70 AM |
344 | 2004-06-15 Alan Modra <amodra@bigpond.net.au> |
345 | ||
346 | * arc-ext.c (build_ARC_extmap): Use bfd_get_section_size | |
347 | instead of _raw_size. | |
348 | ||
bad9ceea JJ |
349 | 2004-06-08 Jakub Jelinek <jakub@redhat.com> |
350 | ||
351 | * ia64-gen.c (in_iclass): Handle more postinc st | |
352 | and ld variants. | |
353 | * ia64-asmtab.c: Rebuilt. | |
354 | ||
0451f5df MS |
355 | 2004-06-01 Martin Schwidefsky <schwidefsky@de.ibm.com> |
356 | ||
357 | * s390-opc.txt: Correct architecture mask for some opcodes. | |
358 | lrv, lrvh, strv, ml, dl, alc, slb rll and mvclu are available | |
359 | in the esa mode as well. | |
360 | ||
f6f9408f JR |
361 | 2004-05-28 Andrew Stubbs <andrew.stubbs@superh.com> |
362 | ||
363 | * sh-dis.c (target_arch): Make unsigned. | |
364 | (print_insn_sh): Replace (most of) switch with a call to | |
365 | sh_get_arch_from_bfd_mach(). Also use new architecture flags system. | |
366 | * sh-opc.h: Redefine architecture flags values. | |
367 | Add sh3-nommu architecture. | |
368 | Reorganise <arch>_up macros so they make more visual sense. | |
369 | (SH_MERGE_ARCH_SET): Define new macro. | |
370 | (SH_VALID_BASE_ARCH_SET): Likewise. | |
371 | (SH_VALID_MMU_ARCH_SET): Likewise. | |
372 | (SH_VALID_CO_ARCH_SET): Likewise. | |
373 | (SH_VALID_ARCH_SET): Likewise. | |
374 | (SH_MERGE_ARCH_SET_VALID): Likewise. | |
375 | (SH_ARCH_SET_HAS_FPU): Likewise. | |
376 | (SH_ARCH_SET_HAS_DSP): Likewise. | |
377 | (SH_ARCH_UNKNOWN_ARCH): Likewise. | |
378 | (sh_get_arch_from_bfd_mach): Add prototype. | |
379 | (sh_get_arch_up_from_bfd_mach): Likewise. | |
380 | (sh_get_bfd_mach_from_arch_set): Likewise. | |
381 | (sh_merge_bfd_arc): Likewise. | |
382 | ||
be8c092b NC |
383 | 2004-05-24 Peter Barada <peter@the-baradas.com> |
384 | ||
385 | * m68k-dis.c(print_insn_m68k): Strip body of diassembly out | |
386 | into new match_insn_m68k function. Loop over canidate | |
387 | matches and select first that completely matches. | |
388 | * m68k-dis.c(print_insn_arg): Fix 'g' case to only extract 1 bit. | |
389 | * m68k-dis.c(print_insn_arg): Call new function m68k_valid_ea | |
390 | to verify addressing for MAC/EMAC. | |
391 | * m68k-dis.c(print_insn_arg): Use reg_half_names for MAC/EMAC | |
392 | reigster halves since 'fpu' and 'spl' look misleading. | |
393 | * m68k-dis.c(fetch_arg): Fix 'G', 'H', 'I', 'f', 'M', 'N' cases. | |
394 | * m68k-opc.c: Rearragne mac/emac cases to use longest for | |
395 | first, tighten up match masks. | |
396 | * m68k-opc.c: Add 'size' field to struct m68k_opcode. Produce | |
397 | 'size' from special case code in print_insn_m68k to | |
398 | determine decode size of insns. | |
399 | ||
a30e9cc4 AM |
400 | 2004-05-19 Alan Modra <amodra@bigpond.net.au> |
401 | ||
402 | * ppc-opc.c (insert_fxm): Enable two operand mfcr when -many as | |
403 | well as when -mpower4. | |
404 | ||
9598fbe5 NC |
405 | 2004-05-13 Nick Clifton <nickc@redhat.com> |
406 | ||
407 | * po/fr.po: Updated French translation. | |
408 | ||
6b6e92f4 NC |
409 | 2004-05-05 Peter Barada <peter@the-baradas.com> |
410 | ||
411 | * m68k-dis.c(print_insn_m68k): Add new chips, use core | |
412 | variants in arch_mask. Only set m68881/68851 for 68k chips. | |
413 | * m68k-op.c: Switch from ColdFire chips to core variants. | |
414 | ||
a404d431 AM |
415 | 2004-05-05 Alan Modra <amodra@bigpond.net.au> |
416 | ||
a30e9cc4 | 417 | PR 147. |
a404d431 AM |
418 | * ppc-opc.c (PPCVEC): Remove PPC_OPCODE_PPC. |
419 | ||
f3806e43 BE |
420 | 2004-04-29 Ben Elliston <bje@au.ibm.com> |
421 | ||
520ceea4 BE |
422 | * ppc-opc.c (XCMPL): Renmame to XOPL. Update users. |
423 | (powerpc_opcodes): Add "dbczl" instruction for PPC970. | |
f3806e43 | 424 | |
1f1799d5 KK |
425 | 2004-04-22 Kaz Kojima <kkojima@rr.iij4u.or.jp> |
426 | ||
427 | * sh-dis.c (print_insn_sh): Print the value in constant pool | |
428 | as a symbol if it looks like a symbol. | |
429 | ||
fd99574b NC |
430 | 2004-04-22 Peter Barada <peter@the-baradas.com> |
431 | ||
432 | * m68k-dis.c(print_insn_m68k): Set mfcmac/mcfemac on | |
433 | appropriate ColdFire architectures. | |
434 | (print_insn_m68k): Handle EMAC, MAC/EMAC scalefactor, and MAC/EMAC | |
435 | mask addressing. | |
436 | Add EMAC instructions, fix MAC instructions. Remove | |
437 | macmw/macml/msacmw/msacml instructions since mask addressing now | |
438 | supported. | |
439 | ||
b4781d44 JJ |
440 | 2004-04-20 Jakub Jelinek <jakub@redhat.com> |
441 | ||
442 | * sparc-opc.c (fmoviccx, fmovfccx, fmovccx): Define. | |
443 | (fmovicc, fmovfcc, fmovcc): Remove fpsize argument, change opcode to | |
444 | suffix. Use fmov*x macros, create all 3 fpsize variants in one | |
445 | macro. Adjust all users. | |
446 | ||
91809fda NC |
447 | 2004-04-15 Anil Paranjpe <anilp1@kpitcummins.com> |
448 | ||
449 | * h8300-dis.c (bfd_h8_disassemble) : Treat "adds" & "subs" | |
450 | separately. | |
451 | ||
f4453dfa NC |
452 | 2004-03-30 Kazuhiro Inaoka <inaoka.kazuhiro@renesas.com> |
453 | ||
454 | * m32r-asm.c: Regenerate. | |
455 | ||
9b0de91a SS |
456 | 2004-03-29 Stan Shebs <shebs@apple.com> |
457 | ||
458 | * mpw-config.in, mpw-make.sed: Remove MPW support files, no longer | |
459 | used. | |
460 | ||
e20c0b3d AM |
461 | 2004-03-19 Alan Modra <amodra@bigpond.net.au> |
462 | ||
463 | * aclocal.m4: Regenerate. | |
464 | * config.in: Regenerate. | |
465 | * configure: Regenerate. | |
466 | * po/POTFILES.in: Regenerate. | |
467 | * po/opcodes.pot: Regenerate. | |
468 | ||
fdd12ef3 AM |
469 | 2004-03-16 Alan Modra <amodra@bigpond.net.au> |
470 | ||
471 | * ppc-dis.c (print_insn_powerpc): Don't print tabs. Handle | |
472 | PPC_OPERANDS_GPR_0. | |
473 | * ppc-opc.c (RA0): Define. | |
474 | (RAQ, RAL, RAM, RAS, RSQ, RTQ, RSO): Use PPC_OPERAND_GPR_0. | |
475 | (RAOPT): Rename from RAO. Update all uses. | |
a9c3619e | 476 | (powerpc_opcodes): Use RA0 as appropriate. |
fdd12ef3 | 477 | |
2dc111b3 | 478 | 2004-03-15 Aldy Hernandez <aldyh@redhat.com> |
fdd12ef3 AM |
479 | |
480 | * ppc-opc.c (powerpc_opcodes): Add BOOKE versions of mfsprg. | |
2dc111b3 | 481 | |
7bfeee7b AM |
482 | 2004-03-15 Alan Modra <amodra@bigpond.net.au> |
483 | ||
484 | * sparc-dis.c (print_insn_sparc): Update getword prototype. | |
485 | ||
7ffdda93 ML |
486 | 2004-03-12 Michal Ludvig <mludvig@suse.cz> |
487 | ||
488 | * i386-dis.c (GRPPLOCK): Delete. | |
7bfeee7b | 489 | (grps): Delete GRPPLOCK entry. |
7ffdda93 | 490 | |
cc0ec051 AM |
491 | 2004-03-12 Alan Modra <amodra@bigpond.net.au> |
492 | ||
493 | * i386-dis.c (OP_M, OP_0f0e, OP_0fae, NOP_Fixup): New functions. | |
494 | (M, Mp): Use OP_M. | |
495 | (None, PADLOCK_SPECIAL, PADLOCK_0): Delete. | |
496 | (GRPPADLCK): Define. | |
497 | (dis386): Use NOP_Fixup on "nop". | |
498 | (dis386_twobyte): Use GRPPADLCK on opcode 0xa7. | |
499 | (twobyte_has_modrm): Set for 0xa7. | |
500 | (padlock_table): Delete. Move to.. | |
501 | (grps): ..here, using OP_0f07. Use OP_Ofae on lfence, mfence | |
502 | and clflush. | |
503 | (print_insn): Revert PADLOCK_SPECIAL code. | |
504 | (OP_E): Delete sfence, lfence, mfence checks. | |
505 | ||
4fd61dcb JJ |
506 | 2004-03-12 Jakub Jelinek <jakub@redhat.com> |
507 | ||
508 | * i386-dis.c (grps): Use INVLPG_Fixup instead of OP_E for invlpg. | |
509 | (INVLPG_Fixup): New function. | |
510 | (PNI_Fixup): Remove ATTRIBUTE_UNUSED from sizeflag. | |
511 | ||
0f10071e ML |
512 | 2004-03-12 Michal Ludvig <mludvig@suse.cz> |
513 | ||
514 | * i386-dis.c (PADLOCK_SPECIAL, PADLOCK_0): New defines. | |
515 | (dis386_twobyte): Opcode 0xa7 is PADLOCK_0. | |
516 | (padlock_table): New struct with PadLock instructions. | |
517 | (print_insn): Handle PADLOCK_SPECIAL. | |
518 | ||
c02908d2 AM |
519 | 2004-03-12 Alan Modra <amodra@bigpond.net.au> |
520 | ||
521 | * i386-dis.c (grps): Use clflush by default for 0x0fae/7. | |
522 | (OP_E): Twiddle clflush to sfence here. | |
523 | ||
d5bb7600 NC |
524 | 2004-03-08 Nick Clifton <nickc@redhat.com> |
525 | ||
526 | * po/de.po: Updated German translation. | |
527 | ||
ae51a426 JR |
528 | 2003-03-03 Andrew Stubbs <andrew.stubbs@superh.com> |
529 | ||
530 | * sh-dis.c (print_insn_sh): Don't disassemble fp instructions in | |
531 | nofpu mode. Add BFD type bfd_mach_sh4_nommu_nofpu. | |
532 | * sh-opc.h: Add sh4_nommu_nofpu architecture and adjust instructions | |
533 | accordingly. | |
534 | ||
676a64f4 RS |
535 | 2004-03-01 Richard Sandiford <rsandifo@redhat.com> |
536 | ||
537 | * frv-asm.c: Regenerate. | |
538 | * frv-desc.c: Regenerate. | |
539 | * frv-desc.h: Regenerate. | |
540 | * frv-dis.c: Regenerate. | |
541 | * frv-ibld.c: Regenerate. | |
542 | * frv-opc.c: Regenerate. | |
543 | * frv-opc.h: Regenerate. | |
544 | ||
c7a48b9a RS |
545 | 2004-03-01 Richard Sandiford <rsandifo@redhat.com> |
546 | ||
547 | * frv-desc.c, frv-opc.c: Regenerate. | |
548 | ||
8ae0baa2 RS |
549 | 2004-03-01 Richard Sandiford <rsandifo@redhat.com> |
550 | ||
551 | * frv-desc.c, frv-opc.c, frv-opc.h: Regenerate. | |
552 | ||
ce11586c JR |
553 | 2004-02-26 Andrew Stubbs <andrew.stubbs@superh.com> |
554 | ||
555 | * sh-opc.h: Move fsca and fsrra instructions from sh4a to sh4. | |
556 | Also correct mistake in the comment. | |
557 | ||
6a5709a5 JR |
558 | 2004-02-26 Andrew Stubbs <andrew.stubbs@superh.com> |
559 | ||
560 | * sh-dis.c (print_insn_sh): Add REG_N_D nibble type to | |
561 | ensure that double registers have even numbers. | |
562 | Add REG_N_B01 for nn01 (binary 01) nibble to ensure | |
563 | that reserved instruction 0xfffd does not decode the same | |
564 | as 0xfdfd (ftrv). | |
565 | * sh-opc.h: Add REG_N_D nibble type and use it whereever | |
566 | REG_N refers to a double register. | |
567 | Add REG_N_B01 nibble type and use it instead of REG_NM | |
568 | in ftrv. | |
569 | Adjust the bit patterns in a few comments. | |
570 | ||
e5d2b64f | 571 | 2004-02-25 Aldy Hernandez <aldyh@redhat.com> |
7bfeee7b AM |
572 | |
573 | * ppc-opc.c (powerpc_opcodes): Change mask for dcbt and dcbtst. | |
e5d2b64f | 574 | |
1f04b05f AH |
575 | 2004-02-20 Aldy Hernandez <aldyh@redhat.com> |
576 | ||
577 | * ppc-opc.c (powerpc_opcodes): Move mfmcsrr0 before mfdc_dat. | |
578 | ||
2f3b8700 AH |
579 | 2004-02-20 Aldy Hernandez <aldyh@redhat.com> |
580 | ||
581 | * ppc-opc.c (powerpc_opcodes): Add m*ivor35. | |
582 | ||
f0b26da6 | 583 | 2004-02-20 Aldy Hernandez <aldyh@redhat.com> |
7bfeee7b AM |
584 | |
585 | * ppc-opc.c (powerpc_opcodes): Add mfivor32, mfivor33, mfivor34, | |
586 | mtivor32, mtivor33, mtivor34. | |
f0b26da6 | 587 | |
23d59c56 | 588 | 2004-02-19 Aldy Hernandez <aldyh@redhat.com> |
7bfeee7b AM |
589 | |
590 | * ppc-opc.c (powerpc_opcodes): Add mfmcar. | |
23d59c56 | 591 | |
34920d91 NC |
592 | 2004-02-10 Petko Manolov <petkan@nucleusys.com> |
593 | ||
594 | * arm-opc.h Maverick accumulator register opcode fixes. | |
595 | ||
44d86481 BE |
596 | 2004-02-13 Ben Elliston <bje@wasabisystems.com> |
597 | ||
598 | * m32r-dis.c: Regenerate. | |
599 | ||
17707c23 MS |
600 | 2004-01-27 Michael Snyder <msnyder@redhat.com> |
601 | ||
602 | * sh-opc.h (sh_table): "fsrra", not "fssra". | |
603 | ||
fe3a9bc4 NC |
604 | 2004-01-23 Andrew Over <andrew.over@cs.anu.edu.au> |
605 | ||
606 | * sparc-opc.c (fdtox, fstox, fqtox, fxtod, fxtos, fxtoq): Tighten | |
607 | contraints. | |
608 | ||
ff24f124 JJ |
609 | 2004-01-19 Andrew Over <andrew.over@cs.anu.edu.au> |
610 | ||
611 | * sparc-opc.c (sparc_opcodes) <f[dsq]tox, fxto[dsq]>: Fix args. | |
612 | ||
a02a862a AM |
613 | 2004-01-19 Alan Modra <amodra@bigpond.net.au> |
614 | ||
615 | * i386-dis.c (OP_E): Print scale factor on intel mode sib when not | |
616 | 1. Don't print scale factor on AT&T mode when index missing. | |
617 | ||
d164ea7f AO |
618 | 2004-01-16 Alexandre Oliva <aoliva@redhat.com> |
619 | ||
620 | * m10300-opc.c (mov): 8- and 24-bit immediates are zero-extended | |
621 | when loaded into XR registers. | |
622 | ||
cb10e79a RS |
623 | 2004-01-14 Richard Sandiford <rsandifo@redhat.com> |
624 | ||
625 | * frv-desc.h: Regenerate. | |
626 | * frv-desc.c: Regenerate. | |
627 | * frv-opc.c: Regenerate. | |
628 | ||
f532f3fa MS |
629 | 2004-01-13 Michael Snyder <msnyder@redhat.com> |
630 | ||
631 | * sh-dis.c (print_insn_sh): Allocate 4 bytes for insn. | |
632 | ||
e45d0630 PB |
633 | 2004-01-09 Paul Brook <paul@codesourcery.com> |
634 | ||
635 | * arm-opc.h (arm_opcodes): Move generic mcrr after known | |
636 | specific opcodes. | |
637 | ||
3ba7a1aa DJ |
638 | 2004-01-07 Daniel Jacobowitz <drow@mvista.com> |
639 | ||
640 | * Makefile.am (libopcodes_la_DEPENDENCIES) | |
641 | (libopcodes_la_LIBADD): Revert 2003-05-17 change. Add explanatory | |
642 | comment about the problem. | |
643 | * Makefile.in: Regenerate. | |
644 | ||
ba2d3f07 AO |
645 | 2004-01-06 Alexandre Oliva <aoliva@redhat.com> |
646 | ||
647 | 2003-12-19 Alexandre Oliva <aoliva@redhat.com> | |
648 | * frv-asm.c (parse_ulo16, parse_uhi16, parse_d12): Fix some | |
649 | cut&paste errors in shifting/truncating numerical operands. | |
650 | 2003-08-04 Alexandre Oliva <aoliva@redhat.com> | |
651 | * frv-asm.c (parse_ulo16): Parse gotofflo and gotofffuncdesclo. | |
652 | (parse_uslo16): Likewise. | |
653 | (parse_uhi16): Parse gotoffhi and gotofffuncdeschi. | |
654 | (parse_d12): Parse gotoff12 and gotofffuncdesc12. | |
655 | (parse_s12): Likewise. | |
656 | 2003-08-04 Alexandre Oliva <aoliva@redhat.com> | |
657 | * frv-asm.c (parse_ulo16): Parse gotlo and gotfuncdesclo. | |
658 | (parse_uslo16): Likewise. | |
659 | (parse_uhi16): Parse gothi and gotfuncdeschi. | |
660 | (parse_d12): Parse got12 and gotfuncdesc12. | |
661 | (parse_s12): Likewise. | |
662 | ||
3ab48931 NC |
663 | 2004-01-02 Albert Bartoszko <albar@nt.kegel.com.pl> |
664 | ||
665 | * msp430-dis.c (msp430_doubleoperand): Check for an 'add' | |
666 | instruction which looks similar to an 'rla' instruction. | |
a0bd404e | 667 | |
c9e214e5 | 668 | For older changes see ChangeLog-0203 |
252b5132 RH |
669 | \f |
670 | Local Variables: | |
2f6d2f85 NC |
671 | mode: change-log |
672 | left-margin: 8 | |
673 | fill-column: 74 | |
252b5132 RH |
674 | version-control: never |
675 | End: |