* config/tc-m68k.c (m68k_ip): Accept 'B' as a size for an
[deliverable/binutils-gdb.git] / opcodes / ChangeLog
CommitLineData
bc830321
JL
1Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2
3 * mn10300-dis.c (disassemble): Make sure all variables are initialized
4 before they are used.
5
160cca64
JL
6start-sanitize-v850
7Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
8
9 * v850-opc.c (v850_opcodes): Put curly-braces around operands
10 for "breakpoint" instruction.
11
12end-sanitize-v850
1a4752c6
ILT
13Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
14
15 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
16 (dep): Use ALL_CFLAGS rather than CFLAGS.
17
0068e79c
MM
18start-sanitize-v850
19Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
20
21 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
22 flag.
23
24end-sanitize-v850
39620b71
FF
25Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
26
27 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
28start-sanitize-tic80
29 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
30end-sanitize-tic80
31
ea6c5620
ILT
32Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
33
34 * mips16-opc.c: Add "abs".
35
6357e7f6 36start-sanitize-tic80
a79d0193
FF
37Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
38
39 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
40 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
41 (disassembler): Add bfd_arch_tic80 support to set disassemble
42 to print_insn_tic80.
43 * tic80-dis.c (print_insn_tic80): Add stub.
44
6357e7f6
FF
45Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
46
47 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
48 * configure: Regenerate with autoconf.
49 * tic80-dis.c: Add file.
50 * tic80-opc.c: Add file.
51
f204f752 52end-sanitize-tic80
b5baebe4
MH
53start-sanitize-d10v
54Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
55
56 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
57
58end-sanitize-d10v
d21f1eae
JL
59Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
60
e098bae8
JL
61 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
62 (mn10200_opcodes): Use it for some logicals and btst insns.
63 Add "break" and "trap" instructions.
64
374cb302
JL
65 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
66
d21f1eae
JL
67 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
68
39e5bea2
ILT
69Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
70
71 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
72 relative load or add now depends upon whether the instruction is
73 in a delay slot.
74
532700fc
JL
75Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
76
c6b62ad1
JL
77 * mn10200-dis.c: Finish writing disassembler.
78 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
79 Fix mask for "jmp (an)".
80
81 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
82 handle endianness issues for mn10300.
83
532700fc
JL
84 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
85
0888b4a3
JL
86Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
87
7bfc95d9
JL
88 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
89 instruction. Fix opcode field for "movb (imm24),dn".
90
0888b4a3
JL
91 * mn10200-opc.c (mn10200_operands): Fix insertion position
92 for DI operand.
93
781766e7
JL
94Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
95
96 * mn10200-opc.c: Create mn10200 opcode table.
97 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
98 but moving along nicely.
99
b65415a4
PS
100Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
101
102 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
103
6827a1c7
C
104Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
105
106 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
107 specifiers for fmovem* instructions.
108
4db788a6
JL
109Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
110
111 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
112
34212ec3
ILT
113Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
114
115 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
116 with dsrl.
117
83296990
JL
118Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
119
120 * mn10300-opc.c: Add some comments explaining the various
121 operands and such.
122
123 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
124
e72d5a50
C
125Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
126
127 * m68k-dis.c (print_insn_arg): Handle new < and > operand
128 specifiers.
129
130 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
131 operand specifiers in fmovm* instructions.
132
70eb6bdd
ILT
133Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
134
135 * ppc-opc.c (insert_li): Give an error if the offset has the two
136 least significant bits set.
137
138Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
139
140 * mips-dis.c (print_insn_mips16): Separate the instruction from
141 the arguments with a tab, not a space.
142
23b01150
JL
143Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
144
069279b3
JL
145 * mn10300-dis.c (disasemble): Finish conversion to '$' as
146 register prefix.
147
23b01150
JL
148 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
149 mov am,(imm32,sp).
150
8d67dc30
ILT
151Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
152
0e809bba
ILT
153 * configure: Rebuild with autoconf 2.12.
154
8d67dc30
ILT
155 Add support for mips16 (16 bit MIPS implementation):
156 * mips16-opc.c: New file.
157 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
158 (mips16_reg_names): New static array.
159 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
160 after seeing a 16 bit symbol.
161 (print_insn_little_mips): Likewise.
162 (print_insn_mips16): New static function.
163 (print_mips16_insn_arg): New static function.
164 * mips-opc.c: Add jalx instruction.
165 * Makefile.in (mips16-opc.o): New target.
166 * configure.in: Use mips16-opc.o for bfd_mips_arch.
167 * configure: Rebuild.
168
0dd19a8f
C
169Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
170
520e44a1
C
171 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
172 operand specifiers in *save, *restore and movem* instructions.
173
174 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
da34628a 175 the coldfire.
1852237c 176
520e44a1 177 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
09d205d1
C
178 register operands for immediate arithmetic, not, neg, negx, and
179 set according to condition instructions.
180
1852237c
C
181 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
182 specifier of the effective-address operand in immediate forms of
183 arithmetic instructions. The specifier for the immediate operand
184 notes how and where the constant will be stored.
185
11cd057a
JL
186Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
187
1852237c
C
188 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
189 opcode.
190
76783aa3
JL
191 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
192 register prefix.
193
11cd057a
JL
194 * mn10300-dis.c (disassemble): Prefix registers with '%'.
195
f497f3ae
JL
196Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
197
f0e98103
JL
198 * mn10300-dis.c (disassemble): Handle register lists.
199
f0398190
JL
200 * mn10300-opc.c: Fix handling of register list operand for
201 "call", "ret", and "rets" instructions.
202
aa9c04cd
JL
203 * mn10300-dis.c (disassemble): Print PC-relative and memory
204 addresses symbolically if possible.
205 * mn10300-opc.c: Distinguish between absolute memory addresses,
206 pc-relative offsets & random immediates.
207
f497f3ae
JL
208 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
209 in 7 byte insns.
210 (disassemble): Handle SPLIT and EXTENDED operands.
211
99246e03
JL
212Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
213
d91028d2
JL
214 * mn10300-dis.c: Rough cut at printing some operands.
215
4aa92185
JL
216 * mn10300-dis.c: Start working on disassembler support.
217 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
218
99246e03
JL
219 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
220 list.
221 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
222
b337f869
MM
223start-sanitize-d10v
224Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
225
226 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
227
228end-sanitize-d10v
54dfaf0a
JL
229Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
230
231 * mn10300-opc.c (mn10300_opcodes): Demand parens around
232 register argument is calls and jmp instructions.
233
234Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
235
236 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
237 getx operand. Fix opcode for mulqu imm,dn.
238
fdef41f3
JL
239Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
240
26433754
JL
241 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
242 in MN10300_OPERAND_SPLIT operands for how many bits
243 appear in the basic insn word. Add IMM32_HIGH24,
244 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
245 (mn10300_opcodes): Use new operands as needed.
246
64ce0668
JL
247 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
248 for bset, bclr, btst instructions.
249 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
250
fdef41f3
JL
251 * mn10300-opc.c (mn10300_operands): Remove many redundant
252 operands. Update opcode table as appropriate.
253 (IMM32): Add MN10300_OPERAND_SPLIT flag.
254 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
255
bb5e141a
JL
256Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
257
258 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
259 operands (for indexed load/stores). Fix bitpos for DI
260 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
261 few instructions that insert immediates/displacements in the
262 middle of the instruction. Add IMM8E for 8 bit immediate in
263 the extended part of an instruction.
264 (mn10300_operands): Use new opcodes as appropriate.
265
73386165
MH
266start-sanitize-d10v
267Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
268
269 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
270 sequential so the assembler never parallelizes it with
271 other instructions.
272
273end-sanitize-d10v
e85c140a
JL
274Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
275
276 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
277 a data/address register that appears in register field 0
278 and register field 1.
279 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
280
03e95623
ILT
281Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
282
283 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
284 standard disassembly.
285
286 * alpha-opc.c (alpha_operands): Rearrange flags slot.
287 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
288 Recategorize PALcode instructions.
289
7d2759fc
JL
290start-sanitize-v850
291Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
292
293 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
294
295end-sanitize-v850
b56c3d6c
ILT
296Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
297
298 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
299 there are no operand types.
300
244558e3
JL
301start-sanitize-v850
302Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
303
304 * v850-opc.c (D9_RELAX): Renamed from D9, all references
305 changed.
306 (v850_operands): Make sure D22 immediately follows D9_RELAX.
307
308end-sanitize-v850
309Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
310
311 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
312
0f02ae6e
JL
313start-sanitize-v850
314Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
315
244558e3
JL
316 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
317 and sst.w instructions.
318
0f02ae6e
JL
319 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
320 "bCC"instructions).
321
322end-sanitize-v850
4f6d7c2c
ILT
323Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
324
325 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
326 and the arguments.
327
de145351
ILT
328Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
329
330 * ppc-opc.c (PPCPWR2): Define.
331 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
332 it.
333
63dc694d
JL
334Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
335
336 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
337 field for movhu instruction.
338start-sanitize-v850
339
340 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
341 cast value to "long" not "signed long" to keep hpux10
342 compiler quiet.
343end-sanitize-v850
344
36b34aa4
JL
345Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
346
02d4ad19
JL
347 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
348 for mov (abs16),DN.
349
ba8ed10c
JL
350 * mn10300-opc.c (FMT*): Remove definitions.
351
1e5ddd3b
JL
352 * mn10300-opc.c (mn10300_opcodes): Fix destination register
353 for shift-by-register opcodes.
354
36b34aa4
JL
355 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
356 into [AD][MN][01] for encoding the position of the register
357 in the opcode.
358
344d6417
JL
359Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
360
361 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
362 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
363
06b79658
JL
364Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
365
db229054
JL
366 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
367 Fix various typos. Add "PAREN" operand.
368 (MEM, MEM2): Define.
369 (mn10300_opcodes): Surround all memory addresses with "PAREN"
370 operands. Fix several typos.
371
06b79658
JL
372 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
373 changes.
374
5ab7bce6
JL
375Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
376
377 * mn10300-opc.c (FMT_XX): Renumber starting at one.
378 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
379 at this time.
380 (mn10300_opcodes): Break opcode format out into its own field.
381 Update many operand fields to deal with signed vs unsigned
382 issues. Fix one or two typos in the "mov" instruction
383 opcode, mask and/or operand fields.
384
6ba7ecd4
ILT
385Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
386
387 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
388 m68851 wasn't reset.
389
6c9370db
ILT
390Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
391
99777c0b
JL
392 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
393 all opcodes. Very rough cut at operands for all opcodes.
394
cd8a9026
JL
395 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
396 opcode table.
6c9370db 397
ae1b99e4
JL
398Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
399
400 * mn10200-opc.c, mn10300-opc.c: New files.
401 * mn10200-dis.c, mn10300-dis.c: New files.
402 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
403 * disassemble.c: Break mn10x00 support into 10200 and 10300
404 support.
405 * configure.in: Likewise.
406 * configure: Rebuilt.
407
42b4add9
JM
408Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
409
410 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
411
e7c50cef
JL
412Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
413
414 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
415 MN10x00 processors.
416 * disassemble (ARCH_mn10x00): Define.
417 (disassembler): Handle bfd_arch_mn10x00.
418 * configure.in: Recognize bfd_mn10x00_arch.
419 * configure: Rebuilt.
420
a5cb84dd
ILT
421Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
422
423 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
424 accordingly. Don't declare functions using op_rtn.
425
426start-sanitize-v850
427Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
428
429 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
430 params to be more standard.
431 * (disassemble): Print absolute addresses and symbolic names for
432 branch and jump targets.
433 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
434 bit operands.
435 * (v850_opcodes): Add breakpoint insn.
436
437end-sanitize-v850
438Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
439
440 * m68k-opc.c: Move the fmovemx data register cases before the
441 other cases, so that they get recognized before the data register
442 does gets treated as a degenerate register list.
443
800bda83
ILT
444Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
445
446 * mips-opc.c: Add a case for "div" and "divu" with two registers
447 and a destination of $0.
448
d7deed25
FF
449Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
450
451 * mips-dis.c (print_insn_arg): Add prototype.
452 (_print_insn_mips): Ditto.
453
30b1724c
ILT
454Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
455
456 * mips-dis.c (print_insn_arg): Print condition code registers as
457 $fccN.
458
459Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
460
461 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
462
6d1e1ee8 463start-sanitize-v850
eb5c28e1
JL
464Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
465
466 * v850-dis.c (disassemble): Make static. Provide prototype.
467
468Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
469
470 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
471 in range checks.
472
574b9cb3
JL
473Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
474
09478dc3
JL
475 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
476 ']' characters into the output stream.
477 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
478 Add "memop" field to all opcodes (for the disassembler).
479 Reorder opcodes so that "nop" comes before "mov" and "jr"
480 comes before "jarl".
481
482 * v850-dis.c (print_insn_v850): Fix typo in last change.
483
e05cae19
JL
484 * v850-dis.c (print_insn_v850): Properly handle disassembling
485 a two byte insn at the end of a memory region when the memory
486 region's size is only two byte aligned.
487
a5f2a4e5
JL
488 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
489
502535cf
JL
490 * v850-dis.c (v850_reg_names): Define.
491 (v850_sreg_names, v850_cc_names): Likewise.
492 (disassemble): Very rough cut at printing operands (unformatted).
493
494 * v850-opc.c (BOP_MASK): Fix.
495 (v850_opcodes): Fix mask for jarl and jr.
496
ba39d3dd
JL
497 * v850-dis.c: New file. Skeleton for disassembler support.
498 * Makefile.in Remove v850 references, they're not needed here
499 and they weren't being sanitized away.
500 * configure.in: Add v850-dis.o when building v850 toolchains.
501 * configure: Rebuilt.
502 * disassemble.c (disassembler): Call v850 disassembler.
503
b2194164
JL
504 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
505 (insert_d8_6, extract_d8_6): New functions.
506 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
507 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
508 Add D8_6.
509 (IF4A, IF4B): Use "D7" instead of "D7S".
510 (IF4C, IF4D): Use "D8_7" instead of "D8".
511 (IF4E, IF4F): New. Use "D8_6".
512 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
513 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
514
c6b9c135
JL
515 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
516 (v850_operands): Change D16 to D16_15, use special insert/extract
517 routines. New new D16 that uses the generic insert/extract code.
518 (IF7A, IF7B): Use D16_15.
519 (IF7C, IF7D): New. Use D16.
520 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
521
fb8c25a3
JL
522 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
523 message. Issue an error if the branch offset is odd.
524
69ae4b82
JL
525 * v850-opc.c: Add notes about needing special insert/extract
526 for all the load/store insns, except "ld.b" and "st.b".
527
574b9cb3
JL
528 * v850-opc.c (insert_d22, extract_d22): New functions.
529 (v850_operands): Use insert_d22 and extract_d22 for
530 D22 operands.
531 (insert_d9): Fix range check.
532
d44b697b
C
533Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
534
535 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
536 and set bits field to D9 and D22 operands.
537
e7f3e5fb
JL
538Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
539
e9ebb364
JL
540 * v850-opc.c (v850_operands): Define SR2 operand.
541 (v850_opcodes): "ldsr" uses R1,SR2.
542
e7f3e5fb
JL
543 * v850-opc.c (v850_opcodes): Fix opcode specs for
544 sld.w, sst.b, sst.h, sst.w, and nop.
545
e7dd7775
JL
546Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
547
548 * v850-opc.c (v850_opcodes): Add null opcode to mark the
549 end of the opcode table.
550
551end-sanitize-v850
552start-sanitize-d10v
553Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
554
555 * d10v-opc.c (pre_defined_registers): Added register pairs,
556 "r0-r1", "r2-r3", etc.
557
558end-sanitize-d10v
559start-sanitize-v850
cc6e50b5
JL
560Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
561
e7dd7775
JL
562 * v850-opc.c (v850_operands): Make I16 be a signed operand.
563 Create I16U for an unsigned 16bit mmediate operand.
564 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
565
d3edb57f
JL
566 * v850-opc.c (v850_operands): Define EP operand.
567 (IF4A, IF4B, IF4C, IF4D): Use EP.
568
18c97701
JL
569 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
570 with immediate operand, "movhi". Tweak "ldsr".
571
fb6da868
JL
572 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
573 correct. Get sld.[bhw] and sst.[bhw] closer.
574
38c7a450
JL
575 * v850-opc.c (v850_operands): "not" is a two byte insn
576
6c1fc4d3
JL
577 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
578
9ab069ea
JL
579 * v850-opc.c (v850_operands): D16 inserts at offset 16!
580
b1e897a9
JL
581 * v850-opc.c (two): Get order of words correct.
582
9ad8ddf1
JL
583 * v850-opc.c (v850_operands): I16 inserts at offset 16!
584
e41c99bd
JL
585 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
586 register source and destination operands.
587 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
588
c262d7d8
JL
589 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
590 same thinko in "trap" opcode.
85b52013 591
280d40df
JL
592 * v850-opc.c (v850_opcodes): Add initializer for size field
593 on all opcodes.
594
4be84c49
JL
595 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
596 Add D8 for 8-bit unsigned field in short load/store insns.
597 (IF4A, IF4D): These both need two registers.
598 (IF4C, IF4D): Define. Use 8-bit unsigned field.
599 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
600 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
601 for "ldsr" and "stsr".
602 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3c72ab70
JL
603 is unsigned.
604
cc6e50b5
JL
605 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
606 short store word (sst.w).
607
69463cbb
C
608Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
609
610 * v850-opc.c (v850_operands): Added insert and extract fields,
611 pointers to functions that handle unusual operand encodings.
612
0bdf3144
JL
613Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
614
9c201b1f
JL
615 * v850-opc.c (v850_opcodes): Enable "trap".
616
0bdf3144
JL
617 * v850-opc.c (v850_opcodes): Fix order of displacement
618 and register for "set1", "clr1", "not1", and "tst1".
619
b10e29f4
JL
620Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
621
7c8157dd
JL
622 * v850-opc.c (v850_operands): Add "B3" support.
623 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
624 and "tst1".
625
626 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
fed1d21f 627
b10e29f4
JL
628 * v850-opc.c: Close unterminated comment.
629
6bc33c7f
C
630Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
631
69463cbb
C
632 * v850-opc.c (v850_operands): Add flags field.
633 (v850_opcodes): add move opcodes.
6bc33c7f 634
6d1e1ee8
C
635Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
636
637 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
638 * configure: (bfd_v850v_arch) Add new case.
639 * configure.in: (bfd_v850_arch) Add new case.
640 * v850-opc.c: New file.
641
642end-sanitize-v850
5751b0d7
DE
643Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
644
645 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
646
647start-sanitize-d10v
648Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
649
650 * d10v-opc.c: Add additional information to the opcode
651 table to help determinine which instructions can be done
652 in parallel.
653
654end-sanitize-d10v
a952ea1c
SS
655Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
656
657 * mpw-make.sed: Update editing of include pathnames to be
658 more general.
659
660Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
661
662 * arm-opc.h: Added "bx" instruction definition.
663
375d76ef
ILT
664Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
665
666 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
667
cff827d7 668start-sanitize-d10v
ed36b6cd
MH
669Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
670
671 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
672
cff827d7
MH
673Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
674
675 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
676
677end-sanitize-d10v
0f38eaa0
ILT
678Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
679
680 * makefile.vms: Update for alpha-opc changes.
681
484c4645
ILT
682Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
683
684 * i386-dis.c (print_insn_i386): Actually return the correct value.
685 (ONE, OP_ONE): #ifdef out; not used.
686
c5e1996f
MH
687start-sanitize-d10v
688Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
689
cff827d7 690 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
c5e1996f
MH
691 Changed subi operand type to treat 0 as 16.
692
693end-sanitize-d10v
82e8213e
ILT
694Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
695
696 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
697 <rose@netcom.com>.
698
50569dee
JSC
699Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
700
701 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
702 memory transfer instructions. Add new format string entries %h and %s.
703 * arm-dis.c: (print_insn_arm): Provide decoding of the new
704 formats %h and %s.
705
3dd5a8d3
MH
706start-sanitize-d10v
707Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
708
709 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
710 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
711
712end-sanitize-d10v
239ce44d
ILT
713Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
714
715 * alpha-dis.c (print_insn_alpha_osf): Remove.
716 (print_insn_alpha_vms): Remove.
717 (print_insn_alpha): Make globally visible. Chose the register
718 names based on info->flavour.
719 * disassemble.c: Always return print_insn_alpha for the alpha.
720
687c3cc8 721start-sanitize-d10v
ab0a2294
MH
722Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
723
724 * d10v-dis.c (dis_long): Handle unknown opcodes.
725
0be71562
MH
726Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
727
728 * d10v-opc.c: Changes to support signed and unsigned numbers.
729 All instructions with the same name that have long and short forms
730 now end in ".l" or ".s". Divs added.
731 * d10v-dis.c: Changes to support signed and unsigned numbers.
732
687c3cc8
MH
733Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
734
735 * d10v-dis.c: Change all functions to use info->print_address_func.
736
737end-sanitize-d10v
354447a4
ILT
738Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
739
740 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
741 move ccr/sr insns more strict so that the disassembler only
742 selects them when the addressing mode is data register.
743
95e3e733
MH
744start-sanitize-d10v
745Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
746 * d10v-opc.c (pre_defined_registers): Declare.
747 * d10v-dis.c (print_operand): Now uses pre_defined_registers
748 to pick a better name for the registers.
354447a4 749
95e3e733 750end-sanitize-d10v
e4024966
ILT
751Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
752
753 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
754 operands for fexpand and fpmerge. From Christian Kuehnke
755 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
756
e7bc7bc3
ILT
757Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
758
759 * alpha-dis.c (print_insn_alpha): No longer the user-visible
760 print routine. Take new regnames and cpumask arguments.
761 Kill the environment variable nonsense.
762 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
763 (print_insn_alpha_vms): New function. Do VMS style regnames.
764 * disassemble.c (disassembler): Test bfd flavour to pick
765 between OSF and VMS routines. Default to OSF.
766
8ec90465
ILT
767Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
768
769 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
770 * configure: Rebuild.
771 * Makefile.in (install): Use @INSTALL_SHLIB@.
772
e3659cbf
MH
773start-sanitize-d10v
774 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
775
776 * configure: (bfd_d10v_arch) Add new case.
777 * configure.in: (bfd_d10v_arch) Add new case.
778 * d10v-dis.c: New file.
779 * d10v-opc.c: New file.
780 * disassemble.c (disassembler) Add entry for d10v.
e4024966 781
e3659cbf 782end-sanitize-d10v
dec678d6
C
783Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
784
785 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
786 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
787
9498be1a
SG
788Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
789
790 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
791 distinguish between variants of the instruction set.
792 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
793 distinguish between variants of the instruction set.
794
be0c8b05
SG
795Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
796
797 * i386-dis.c (print_insn_i8086): New routine to disassemble using
798 the 8086 instruction set.
799 * i386-dis.c: General cleanups. Make most things static. Add
800 prototypes. Get rid of static variables aflags and dflags. Pass
801 them as args (to almost everything).
802
0decb7fd 803Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
52aa5336 804
3b2a7894
JL
805 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
806
8e9c1f74
JL
807 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
808
52aa5336
JL
809 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
810 if the next arg is marked with SRC_IN_DST. Gross.
811
b3ef936e
JL
812 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
813 we're looking for and find EXR.
814
81fc72a7
JL
815 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
816 if we're looking for KBIT and we don't find it.
0decb7fd 817
bf0b880f
JL
818 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
819 for L_3 and L_2.
820
0decb7fd
JL
821 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
822 3bit immediate operands.
823
16954037 824Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
972b1bb0 825
25b344a4
JL
826 * Released binutils 2.7.
827
16954037
ILT
828 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
829 <kkaempf@progis.ac-net.de>.
830
831Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
832
972b1bb0
ILT
833 * alpha-opc.c: Correct second case of "mov" to use OPRL.
834
eb2c8518
SG
835Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
836
837 * sparc-dis.c (print_insn_sparclite): New routine to print
838 sparclite instructions.
839
9070eaff
C
840Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
841
842 * m68k-opc.c (m68k_opcodes): Add coldfire support.
843
b1dd184e
DE
844Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
845
846 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
847 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
848 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
849
2f70f660
JM
850Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
851
852 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
853 Use autoconf-set values.
854 (docdir, oldincludedir): Removed.
855 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
856
857Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
858
859 * alpha-opc.c: New file.
860 * alpha-opc.h: Remove.
861 * alpha-dis.c: Complete rewrite to use new opcode table.
862 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
863 * configure: Rebuild with autoconf 2.10.
864 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
865 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
866 alpha-opc.h.
867 (alpha-opc.o): New target.
868
c635473f
ILT
869Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
870
4264a46e
ILT
871 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
872 Set imm_added_to_rs1 even if the source and destination register
873 are not the same.
874
c635473f
ILT
875 * sparc-opc.c: Add some two operand forms of the wr instruction.
876
cc973817
JL
877Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
878
879 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
880 to just "mode".
881
cc973817
JL
882 * disassemble.c (disassembler): Handle H8/S.
883 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
25b344a4 884
1b5dbf74
ILT
885Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
886
c635473f
ILT
887 * sparc-opc.c: Add beq/teq as aliases for be/te.
888
1b5dbf74
ILT
889 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
890 <sergei@msil.sps.mot.com>.
891
03496c49
ILT
892Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
893
894 * makefile.vms: New file.
895
896 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
897
898Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
899
900 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
901 regardless of plen.
902
903Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
904
905 * i386-dis.c (OP_OFF): Call append_prefix.
906
366323cf
MM
907Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
908
909 * ppc-opc.c (instruction encoding macros): Add explicit casts to
910 unsigned long to silence a warning from the Solaris PowerPC
911 compiler.
912
913Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
914
915 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
916
917Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
918
919 * sparc-dis.c (X_IMM,X_SIMM): New macros.
920 (X_IMM13): Delete.
921 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
922 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
923 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
924 cpush, cpusha, cpull sparclet insns.
925
ec680fc5
DE
926Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
927
366323cf 928 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
ec680fc5 929
1dd37c48
ILT
930Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
931
932 * sparc-opc.c: Set F_FBR on floating point branch instructions.
933 Set F_FLOAT on other floating point instructions.
934
95bc20ec
MM
935Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
936
937 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
938 registers.
939 (powerpc_opcodes): Add 860/821 specific SPRs.
940
639b5a09
ILT
941Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
942
943 * configure.in: Permit --enable-shared to specify a list of
57117785 944 directories. Set and substitute BFD_PICLIST.
639b5a09 945 * configure: Rebuild.
57117785
ILT
946 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
947 uses. Set to @BFD_PICLIST@.
639b5a09 948
d2f6ce6a
JL
949Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
950
951 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
952 not "abs", which may be needed for the absolute in something
953 like btst #0,@10:8. Print L_3 immediates separately from other
954 immediates. Change ABSMOV reference to ABS8MEM.
955
d302b5f2
DE
956Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
957
958 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
959 (current_arch_mask): New static global.
960 (compute_arch_mask): New static function.
961 (print_insn_sparc): Delete sparc_v9_p. New static local
962 current_mach. Resort opcode table if current_mach changes.
963 Generalize "insn not supported" test.
964 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
965 Delete test for v9/!v9.
966 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
967 (v6notlet): Define.
968 (brfc): Split into CBR and FBR for coprocessor/fp branches.
969 (brfcx): Renamed to FBRX.
970 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
971 coprocessor mnemonics are not supported on the sparclet).
972 (condf): Renamed to CONDF.
973 (SLCBCC2): Delete F_ALIAS flag.
974
03481f0e
DE
975Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
976
977 * sparc-opc.c (sparc_opcodes): rd must be 0 for
978 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
979
c8303271
ILT
980Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
981
982 * Makefile.in (config.status): Depend upon BFD VERSION file, so
983 that the shared library version number is set correctly.
984
7919b9ec
ILT
985Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
986
987 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
988 Miles Bader <miles@gnu.ai.mit.edu>.
989 * configure: Rebuild.
990
991Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
992
993 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
994 malloc.
995
ea2488ad
ILT
996Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
997
998 * configure: Rebuild with autoconf 2.8.
999
1000Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
1001
1002 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
1003 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
1004
8f218e05
ILT
1005Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
1006
1007 * configure.in: Don't set SHLIB or SHLINK to an empty string,
1008 since they appear as targets in Makefile.in.
1009 * configure: Rebuild.
1010
c8f388e7
SS
1011Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
1012
1013 * mpw-make.sed: Edit out shared library support bits.
1014
38399547
DE
1015Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
1016
1017 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
1018 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
1019 (sparc_opcodes): Add sparclet insns.
1020 (sparclet_cpreg_table): New static local.
1021 (sparc_{encode,decode}_sparclet_cpreg): New functions.
1022 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
1023
1024Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
1025
1026 * i386-dis.c (index16): New static variable.
1027 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
1028 other way around.
1029 (OP_indirE): Return result of OP_E.
1030 (OP_E): Check for 16 bit addressing mode, and disassemble
1031 correctly. Optimised 32 bit case a little. Don't print
1032 "(base,index,scale)" when sib specifies only an offset.
1033
a9c5cc53
ILT
1034Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
1035
1036 * configure.in: Set and substitute SHLIB_DEP.
1037 * configure: Rebuild.
1038 * Makefile.in (SHLIB_DEP): New variable.
1039 (LIBIBERTY_LISTS, BFD_LIST): New variables.
1040 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
1041 COMMON_SHLIB, add them to piclist with appropriate modifications.
1042 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
1043 here: just use piclist.
1044
b62e64e9
DE
1045Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
1046
1047 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
1048 (print_insn_sparc): Rewrite v9/not-v9 tests.
1049 (compare_opcodes): Likewise.
1050 * sparc-opc.c (MASK_<ARCH>): Define.
1051 (v6,v7,v8,sparclite,v9,v9a): Redefine.
1052 (sparclet,v6notv9): Define.
1053 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
1054 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
1055
6d76c71f
ILT
1056Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
1057
46bcd2ec
ILT
1058 * configure.in: Call AC_PROG_CC before configure.host.
1059 * configure: Rebuild.
1060
6d76c71f
ILT
1061 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
1062
03db5a93
ILT
1063Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
1064
1065 * i386-dis.c (onebyte_has_modrm): New static array.
1066 (twobyte_has_modrm): New static array.
1067 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
1068
1069Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
1070
1071 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
1072 $(SHLINK).
1073
222e3f6e
MM
1074Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1075
1076 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
1077 doesn't conflict.
1078
c07dc459
ILT
1079Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
1080
222e3f6e
MM
1081 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
1082 m68010up, not just m68020up | cpu32.
1083
c07dc459
ILT
1084 * Makefile.in (SONAME): New variable.
1085 ($(SHLINK)): Make a link to the transformed name, as well.
1086 (stamp-tshlink): New target.
1087 (install): Skip stamp-tshlink during install.
1088
1089Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
1090
1091 * configure.in: Call AC_ARG_PROGRAM.
1092 * configure: Rebuild.
1093 * Makefile.in (program_transform_name): New variable.
1094 (install): Transform library name before installing it.
1095
e0bf1022
ILT
1096Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
1097
1a4dd30e 1098 * i960-dis.c (mem): Add HX dcinva instruction.
1a4dd30e 1099
e0bf1022
ILT
1100 Support for building as a shared library, based on patches from
1101 Alan Modra <alan@spri.levels.unisa.edu.au>:
1102 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
1103 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
1104 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
1105 * configure: Rebuild.
1106 * Makefile.in (ALLLIBS): New variable.
1107 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
1108 (COMMON_SHLIB, SHLINK): New variables.
1109 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
1110 (STAGESTUFF): Remove variable.
1111 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
1112 (stamp-piclist, piclist): New targets.
1113 ($(SHLIB), $(SHLINK)): New targets.
1114 ($(OFILES)): Depend upon stamp-picdir.
1115 (disassemble.o): Build twice if PICFLAG is set.
1116 (MOSTLYCLEAN): Add pic/*.o.
1117 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
1118 (distclean): Remove pic and stamp-picdir.
1119 (install): Install shared libraries.
1120 (stamp-picdir): New target.
1121
1122Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
1123
1124 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
1125 Print unknown instruction as "unknown", rather than in hex.
1126
9fcea7ef
ILT
1127Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
1128
1129 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
1130
1131Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
1132
1133 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
1134
931c53ab
ILT
1135Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
1136
1137 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
1138 when necessary. From Ulrich Drepper
1139 <drepper@myware.rz.uni-karlsruhe.de>.
1140
ca4cb8bc
DE
1141Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
1142
1143 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
1144 sparc_num_opcodes. Update architecture enum values.
1145 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
1146 (sparc_opcode_lookup_arch): New function.
1147 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
1148 (sparc_opcodes): Add v9a shutdown insn.
1149
187fddf7
DE
1150Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
1151
986c92a7
DE
1152 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
1153 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
1154 architecture.
1155 (print_insn_sparc64): Deleted.
1156 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
1157 print_insn_sparc.
79ae32ab 1158
187fddf7
DE
1159 * sparc-opc.c (architecture_pname): Add v9a.
1160
6ddc0baa
ILT
1161Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
1162
1163 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
1164 incorrectly defined as 0x16 when it should be 0x15.
1165 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
1166 (alpha_insn_set): added cvtst and cvttq float ops. Also added
1167 excb (exception barrier) which is defined in the Alpha
1168 Architecture Handbook version 2.
1169 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
1170 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
1171 disassembled as or, for example.
1172
fef0b65b
ILT
1173Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
1174
1175 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
1176 (_print_insn_mips): Change i from int to unsigned int.
1177
3cf013f8
MM
1178Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
1179
1180 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
1181 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
1182
1d935cf6
MM
1183Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
1184
1185 * i386-dis.c: Added Pentium Pro instructions.
1186
1187Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1188
1189 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
1190 being for Power2.
1191
1192Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1193
1194 * sh-opc.h (sh_nibble_type): Added REG_B.
1195 (sh_arg_type): Added A_REG_B.
1196 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
1197 and stc.l opcodes.
1198 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
1199
ab0ec5d0
ILT
1200Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
1201
1202 * disassemble.c (disassembler): Use new bfd_big_endian macro.
1203
1d776313
ILT
1204Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
1205
1206 * Makefile.in (distclean): Remove stamp-h. From Ronald
1207 F. Guilmette <rfg@monkeys.com>.
1208
211eda66
SS
1209Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
1210
1211 From David Mosberger-Tang <davidm@azstarnet.com>:
1212 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
1213 instruction.
1214
60da0079
C
1215Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1216
1217 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
1218 (sh_table): Added many SH3 opcodes.
1219 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
1220
695b028f
MM
1221Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1222
1223 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
1224 (subco,subco.): Mark this PPC, not PPCCOM.
1225
bd22cd1e
ILT
1226Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
1227
1228 * configure: Rebuild with autoconf 2.7.
1229
00103dfa
ILT
1230Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
1231
1232 * configure: Rebuild with autoconf 2.6.
1233
1234Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
1235
1236 * configure.in: Sort list of architectures. Accept but do nothing
1237 for alliant, convex, pyramid, romp, and tahoe.
1238
1239Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
1240
1241 * a29k-dis.c (print_special): Change num to unsigned int.
1242
1243Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
1244
1245 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
1246 shifting it.
1247
6a468850
ILT
1248Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
1249
1250 * configure.in: Call AC_CHECK_PROG to find and cache AR.
1251 * configure: Rebuilt.
1252
f98c3369
ILT
1253Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
1254
1255 * configure.in: Add case for bfd_i860_arch.
1256 * configure: Rebuild.
1257
681447c6
ILT
1258Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
1259
1260 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
1261 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
1262 (NEXTDOUBLE): Likewise.
1263 (print_insn_m68k): Don't match fmoveml if there is more than one
1264 register in the list.
1265 (print_insn_arg): Handle a place of '8' for a type of 'L'.
1266
dbf7e45f
ILT
1267Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
1268
1269 * m68k-opc.c: Use #W rather than #w.
1270 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
1271
681bbcf5
ILT
1272Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
1273
1274 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
1275 and likewise for all the dbxx opcodes.
1276
76ab2645
FF
1277Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
1278
1279 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
1280
a2bdba31
JSC
1281Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
1282
1283 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
1284 the VR4100 specific instructions to the mips_opcodes structure.
1285
1286Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
1287
1288 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
1289 ugly Metrowerks bug in CW6, is fixed in CW7.
1290
d75c2e0f
MM
1291Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1292
1293 * ppc-opc.c (whole file): Add flags for common/any support.
1294
1295Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
1296
1297 * Makefile.in (BISON): Remove macro.
1298 (FLAGS_TO_PASS): Remove BISON.
1299
9e0b0ae7
KR
1300Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
1301
1302 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1303
1304 * m68k-dis.c (print_insn_m68k): Recognize all two-word
1305 instructions that take no args by looking at the match mask.
1306 (print_insn_arg): Always print "%" before register names.
1307 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
1308 [case '_']: Don't print "@#" before address.
1309 [case 'J']: Use "%s" as format string, not register name.
1310 [case 'B']: Treat place == 'C' like 'l' and 'L'.
1311
726257a8
KR
1312Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
1313
1314 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
1315 name correctly.
1316
e521d840
SC
1317Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
1318
1319 From David Mosberger-Tang <davidm@azstarnet.com>
1320
1321 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
1322 (alpha_insn_set): added definitions for VAX floating point
1323 instructions (Unix compilers don't generate these, but handcoded
1324 assembly might still use them).
1325
1326 * alpha-dis.c (print_insn_alpha): added support for disassembling
1327 the miscellaneous instructions in the Alpha instruction set.
1328
1329Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
1330
1331 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
1332 no longer create sysdep.h, sed ppc-opc.c to work around a
1333 serious Metrowerks C bug.
1334 * mpw-make.in: Remove.
1335 * mpw-make.sed: New file, used by mpw-configure to edit
1336 Makefile.in into an MPW makefile.
1337
1cd3bab3
ILT
1338Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
1339
1340 * Makefile.in (maintainer-clean): New synonym for realclean.
1341
a4a879cd
ILT
1342Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
1343
1344 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
1345 which use '0', '1', and '2' instead. Specify the proper size for
1346 a pmove immediate operand. Correct the pmovefd patterns to be
1347 moves to a register, not from a register.
1348 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
1349
4814df24
DE
1350Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
1351
1352 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
1353 %psr, %wim, %tbr as F_NOTV9.
1354
84c1534f
ILT
1355Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
1356
824155e8
ILT
1357 * Makefile.in (Makefile): Just rebuild Makefile when running
1358 config.status.
1359 (config.h, stamp-h): New targets.
1360 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
1361 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
1362 rebuilding config.h.
1363 * configure: Rebuild.
1364
84c1534f
ILT
1365 * mips-opc.c: Change unaligned loads and stores with "t,A"
1366 operands to use "t,A(b)".
1367
84c1534f
ILT
1368Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1369
1370 * sh-dis.c (print_insn_shx): Add F_FR0 support.
1371
84c1534f
ILT
1372Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1373
1374 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
1375 until 3 instead of until 2.
1376
40db6118
ILT
1377Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
1378
1379 * Makefile.in (ALL_CFLAGS): Define.
1380 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
1381 (MOSTLYCLEAN): Add config.log.
1382 (distclean): Don't remove config.log.
1383 * configure.in: Substitute HDEFINES.
1384 * configure: Rebuild.
1385
dd6ed5ab
JW
1386Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1387
1388 * sh-opc.h (sh_arg_type): Add F_FR0.
1389 (sh_table, case fmac): Add F_FR0 as first argument.
1390
dd6ed5ab
JW
1391Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1392
1393 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
1394
49cb62cd
DE
1395Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
1396
1397 * sparc-dis.c: Remove all references to NO_V9.
1398
beb926c0
ILT
1399Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
1400
1401 * aclocal.m4: Just include ../bfd/aclocal.m4.
1402 * configure: Rebuild.
1403
fdd7e4ef
DE
1404Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
1405
1406 * sparc-dis.c (X_DISP19): Define.
1407 (print_insn, case 'G'): Use it.
1408 (print_insn, case 'L'): Sign extend displacement.
1409
c62d1274
ILT
1410Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
1411
9b65d522
ILT
1412 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
1413 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
1414 host_makefile_frag or frags.
1415 * aclocal.m4: New file.
1416 * configure: Rebuild.
1417 * Makefile.in (INSTALL): Set to @INSTALL@.
1418 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
1419 (INSTALL_DATA): Set to @INSTALL_DATA@.
1420 (AR): Set to @AR@.
1421 (AR_FLAGS): Set to rc rather than qc.
1422 (CC): Define as @CC@.
1423 (CFLAGS): Set to @CFLAGS@.
1424 (@host_makefile_frag@): Remove.
1425 (config.status): Remove dependency upon @frags@.
1426
c62d1274
ILT
1427 * configure.in: ../bfd/config.bfd now just sets shell variables.
1428 Use them rather than looking through target Makefile fragments.
1429 * configure: Rebuild.
1430
db29ae72
JW
1431Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1432
1433 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
1434
a69d3a72
DE
1435Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
1436
90c45f31
DE
1437 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
1438 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
1439 sparc64 insns.
1440
1441 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
a69d3a72
DE
1442 (lookup_{name,value}): New functions.
1443 (prefetch_table): New static local.
1444 (sparc_{encode,decode}_prefetch): New functions.
1445 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
1446
9b39b1a8
JW
1447Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1448
1449 * sh-opc.h: Add blank lines to improve readabililty of sh3e
1450 instructions.
1451
66f6448d
JW
1452Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1453
1454 * sh-dis.c: Correct comment on first line of file.
1455
7ec65830
DE
1456Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
1457
201bf506
DE
1458 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
1459
66f6448d
JW
1460 * sparc-opc.c (asi, membar): New static locals.
1461 (sparc_{encode,decode}_{asi,membar}): New functions.
1462 (sparc_opcodes, membar insn): Fix.
7ec65830 1463 * sparc-dis.c (print_insn): Call sparc_decode_asi.
66f6448d
JW
1464 Support decoding of membar masks.
1465 (X_MEMBAR): Define.
7ec65830
DE
1466
1467Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
1468
1469 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
1470
259d19c2
ILT
1471Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
1472
1473 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
1474 and likewise for the other branches. Add bhs as an alias for bcc,
1475 and likewise for the size variants. Add dbhs as an alias for
1476 dbcc.
1477
259d19c2
ILT
1478Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
1479
1480 * sh-opc.h (FP sts instructions): Update to match reality.
1481
3d915dd2
ILT
1482Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
1483
1484 * m68k-dis.c: (fpcr_names): Add % before all register names.
1485 (reg_names): Likewise.
1486 (print_insn_arg): Don't explicitly print % before register names.
1487 Add % before register names in static array names. In case 'r',
1488 print data registers as `@(Dn)', not `Dn@'. When printing a
1489 memory address, don't print @# before it.
1490 (print_indexed): Change base_disp and outer_disp from int to
1491 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
1492 syntax. Sign extend 8 byte displacement correctly.
1493 (print_base): Print using MIT syntax. Print zpc when appropriate.
1494 Change parameter disp from int to bfd_vma.
1495
1496 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
1497 for jsr.
1498
1ca31557
JL
1499Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
1500
1501 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
1502 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
1503 * sh-opc.h (sh_arg_type): Add new operand types.
1504 (sh_table): Add new opcodes from SH3E Floating Point ISA.
1505
1ca31557
JL
1506Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
1507
1508 * Makefile.in (distclean): Remove generated file config.h.
1509
1510Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
1511
1512 * Makefile.in (distclean): Remove generated file config.h.
1513
1514Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
1515
1516 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
1517 Clean up tables.
1518 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
1519 (opcode): Remove.
1520 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
1521 rather than numopcodes. Use m68k_opcodes rather than removed
1522 opcode function. Don't check F_ALIAS.
1523 (print_insn_arg): Change first parameter to be const char *.
1524 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
1525 (m68k-opc.o): New target.
1526 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
1527 * configure: Rebuild.
1528
f069afb4
DE
1529Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
1530
1531 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
9a84bc05 1532 (opcode_bits, opcode_hash_table): New variables.
f069afb4
DE
1533 (opcodes_initialized): Renamed from opcodes_sorted.
1534 (build_hash_table): New function.
1535 (is_delayed_branch): Use hash table.
1536 (print_insn): Renamed from print_insn_sparc, made static.
9a84bc05 1537 Build and use hash table. If !sparc64, ignore sparc64 insns,
f069afb4 1538 and vice-versa if sparc64.
9a84bc05
DE
1539 (print_insn_sparc, print_insn_sparc64): New functions.
1540 (compare_opcodes): Move sparc64 opcodes to end.
1541 Print commutative insns with constant second.
f069afb4
DE
1542 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
1543
1544Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
1545
1546 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
1547 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
1548 avoids printing a delay slot in a delay slot.
1549 * sh-opc.h (sh_table): Fully bracket last entry.
1550
1551Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
1552
1553 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
1554
1555Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
1556
1557 * configure.in: Get host_makefile_frag from ${srcdir}.
1558
1559 * configure.in: Autoconfiscated. Check for string[s].h. Create
1560 config.h from config.in. Don't set up sysdep.h link.
1561 * sysdep.h: New file.
1562 * configure, config.in: New files, generated from configure.in.
1563 * Makefile.in: Updated to be processed autoconf-style.
1564 (distclean): Keep sysdep.h. Remove config.log and config.cache.
1565 (Makefile): Depend on config.status.
1566 (config.status): New rule.
1567 * configure.bat: Update Makefile substitutions.
1568
89abbf9d
ILT
1569Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
1570
1571 * mips-opc.c (L1): Define.
1572 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
1573 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
1574 and wb.
1575
141b9f1b
ILT
1576Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
1577
89abbf9d
ILT
1578 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
1579 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
1580 have multiple add units but only a single logical unit.
1581
141b9f1b
ILT
1582 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
1583 shifted by 18, without any insertion or extraction function.
1584 (insert_cr, extract_cr): Remove.
1585
1586start-sanitize-arc
1587Mon Jul 3 11:54:31 1995 Ian Lance Taylor <ian@cygnus.com>
1588
1589 * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
1590
1591end-sanitize-arc
1592Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1593
1594 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
1595 register names.
1596
6efe6dc5
SS
1597Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
1598
1599 * mpw-config.in: Add sh and i386 configs, remove sparc config.
1600 * sh-opc.h: Add copyright.
1601
1602Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
1603
1604 * Makefile.in (crunch-m68k): Delete extra target accidentally
1605 checked in a while ago.
1606
1607Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1608
1609 * sh-opc.h (sh_table): Add SH3 support.
1610
1ff71ed0
SC
1611Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
1612
1613 * sh-opc.h: Added bsrf and braf.
1614
1615Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
1616
1617 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
1618 bogus [ls]fm{ea,fd} patterns.
1619
1620 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
1621 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
1622 initialize it from memory. Make function static.
1623 (print_insn_{big,little}_arm): New functions.
1624 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
1625 the correct endianness.
1626
1627start-sanitize-arc
1628Sat Apr 29 23:20:05 1995 Doug Evans <dje@chestnut.cygnus.com>
1629
1630 * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
1631 (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
1632end-sanitize-arc
1633
8f96fa0e
JM
1634Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
1635
1ff71ed0 1636 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
8f96fa0e
JM
1637 enum list.
1638
4121273f
MM
1639Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1640
1641 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
1642 17th, so that it builds again using GCC as the compiler.
1643
6a37aaf1
KR
1644Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1645
1646 * mips-dis.c (print_insn_little_mips): Cast return value from
1647 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
1648 expects an unsigned long, and that might be fewer words of
1649 argument storage (e.g., if bfd_vma is long long on a 32-bit
1650 machine).
1651 (print_insn_big_mips): Likewise with bfd_getb32 value.
1652 (_print_insn_mips): Now static.
1653
1654Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
1655
1656 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
1657 gcc memory hog problem with initializer is fixed.
1658
1659start-sanitize-arc
1660Wed Apr 12 09:04:12 1995 Doug Evans <dje@canuck.cygnus.com>
1661
1662 * arc-opc.c (NULL): Define.
1663 (arc_operands, insn fields u,s): Delete.
1664 (arc_operands, insn fields a,b,c): Mark as signed.
1665 (arc_opcodes): No longer const, links computed at run-time.
1666 (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
1667 suffixes that affect the insn code.
1668 (arc_opcodes): Resort table to macros are first.
1669 (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
1670 (arc_opcodes, st [b] entry): Likewise.
1671 (arc_opcodes, st [b,d] entry): Fix mask, value.
1672 (arc_reg_names): Add entries for r29, r30, r31, r60.
1673 (opcode_map, icode_map): New static globals.
1674 (arc_opcode_init_tables): Initialize them.
1675 (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
1676 (insert_shimmoffset): Signal error if register present.
1677 Validate constant.
1678 * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
1679end-sanitize-arc
1680
1e095685
SS
1681Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
1682
1683 Merge in support for Mac MPW as a host.
1684 (Old change descriptions retained for informational value.)
1685
1686 * mpw-config.in (archname): Compute from the config.
1687 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
1688
1689 * mpw-config.in (target_arch): Compute from canonical target.
1690 (m68k, mips, powerpc, sparc): Add architectures.
1691 * mpw-make.in (disassemble.c.o): Add.
1692 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
1693
1694 * mpw-config.in (BFD_MACHINES): Set to a default value.
1695 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
1696
1697 * mpw-make.in (CSEARCH): Add extra-include to search path.
1698
1699 * mpw-config.in (varargs.h): Don't create.
1700 (sysdep.h): Create using forward-include.
1701 * mpw-make.in (CSEARCH): Add include/mpw to search path.
1702
1703 * mpw-config.in: New file, MPW version of configure.in.
1704 * mpw-make.in: New file, MPW version of Makefile.in.
1705
1a56be5c
DE
1706start-sanitize-arc
1707Thu Apr 6 20:36:08 1995 Doug Evans <dje@chestnut.cygnus.com>
1708
1709 * arc-dis.c (print_insn): New parameter `big_p'. Callers updated.
1710 Call arc_get_opcode_mach to map bfd mach number to opcode value.
1711 (print_insn_*): Pass bfd mach number, not opcode version.
1712 * arc-opc.c (arc_get_opcode_mach): New function.
1713end-sanitize-arc
1714
1715Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1716
1717 * alpha-dis.c (print_insn_alpha): Put empty statement after
1718 default label.
1719
1720Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
1721
1722 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
1723 (low_sign_extend): Likewise.
1724 (get_field): Delete unused function.
1725 (set_field, deposit_14, deposit_21): Likewise.
1726
1727Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1728
1729 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
1730 (guy@netapp.com).
1731
c024cc11
KR
1732Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
1733
1734 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
1735
1736 * alpha-opc.h (OSF_ASMCODE): define
1737 print pal-code names as defined in App C of the
1738 Alpha Architecture Reference Manual
1739
1740 * alpha-dis.c: cleaned up output
1741 print stylized code forms as defined in App A.4.3 of the
1742 Alpha Architecture Reference Manual
1743
8dbed89e
DE
1744Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
1745
1746 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
1747 `rfe'.
1748 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
1749 'N', and 'M'.
1750
029e2524
KR
1751Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1752
1753 * m68k-dis.c (opcode): New function. Returns address of opcode
1754 table entry given index, even if the opcode table was split to
1755 work around gcc bugs.
1756 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
1757 directly.
8cf2e6eb
KR
1758 (BREAK_UP_BIG_DECL): Make secondary array static and const.
1759 (reg_names): Now const.
1760 (print_insn_arg): Arrays cacheFieldName and names now const.
1761 (print_indexed): Array scales now const.
029e2524 1762
3aa44a1d
DE
1763start-sanitize-arc
1764Tue Mar 7 21:14:14 1995 Doug Evans <dje@chestnut.cygnus.com>
1765
1766 * arc-dis.c (print_insn_arc_base): Split into big and little fns.
1767 (print_insn_arc_{host,graphics,audio}): Likewise.
1768 (print_insn): Add prototype.
3aa44a1d
DE
1769 (arc_get_disassembler): New arg `big_p'. Return little or big
1770 print fn accordingly.
1771 * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
1772 (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
1773 (arc_opval_supported): Likewise.
1774 * disassemble.c (disassembler): Pass big endian flag to
1775 arc_get_disassembler.
1776end-sanitize-arc
1777
ab204453
ILT
1778Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
1779
1780 * ppc-opc.c: Sort recently added instructions by minor opcode
1781 number within major opcode number.
1782
3f073f06
JL
1783Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
1784
1785 * hppa-dis.c: Include libhppa.h.
1786
1787Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
1788
1789 * mips-opc.c: Change dli to use M_DLI, and add dla.
1790
f1cb5ff2
PS
1791Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1792
1793 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
1794
07f27bb8
DE
1795start-sanitize-arc
1796Fri Feb 17 12:42:25 1995 Doug Evans <dje@chestnut.cygnus.com>
1797
1798 * arc-dis.c (arc_get_disassembler): Change argument to int,
1799 one of bfd_mach_arc_xxx. All callers updated.
1800end-sanitize-arc
1801
f27ab330
ILT
1802Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
1803
1804 * mips-opc.c: Add r4650 mul instruction.
1805
470feacf
ILT
1806Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
1807
1808 * mips-opc.c: Add uld and usd macros for unaligned double load and
1809 store.
1810
1811Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1812
1813 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
1814 mfdcr, mtdcr, icbt, iccci.
1815
6acc9345 1816start-sanitize-arc
470feacf
ILT
1817Mon Feb 13 11:09:17 1995 Doug Evans <dje@canuck.cygnus.com>
1818
1819 * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
1820 * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
1821 ('L' operand): Mark as ARC_OPERAND_ADDRESS.
1822 (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
1823 (arc_opcodes, ld/st insns): Fix address writeback operand letter.
1824 (insert_absaddr): New function.
1825
6acc9345
DE
1826Thu Feb 9 19:19:23 1995 Doug Evans <dje@canuck.cygnus.com>
1827
1828 * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
1829 New argument `cpu', pass it to arc_opcode_init_tables.
1830 Document byte order dependencies. Ignore unsupported insns.
c81a2ce3 1831 (arc_get_disassembler): New function.
6acc9345
DE
1832 (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
1833 print_insn_arc_audio): New functions.
1834 * arc-opc.c (MULTSHIFT operand): Delete.
1835 (UNSIGNED, SATURATION): New operands.
1836 (mac, mul, mul64, mulu64): New insns.
1837 (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
1838 (padc, padd, pmov, pand, psbc, psub, swap): New insns.
1839 (host,graphics,audio extended and auxiliary regs): Define.
1840 (ss, sc, mh, ml): New suffixes.
1841 (arc_opcode_supported, arc_opval_supported): New functions.
1842 (insert_multshift, extract_multshift): Deleted.
9f05921f 1843 * disassemble.c (disassembler, case bfd_arch_arc): Call
c81a2ce3 1844 arc_get_disassembler to get disassembler routine.
6acc9345
DE
1845end-sanitize-arc
1846
7010c43a
SS
1847Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
1848
1849 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
1850 signed char fields to shorts, more portable.
1851
ce2349c5
SS
1852Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
1853
1854 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
1855 char fields as signed chars, since they may have negative values.
1856
9ce4de19
C
1857Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1858
1859 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
1860 (mycroft@netbsd.org).
1861
1862Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
1863
1864 From "Logg, Ed" <elogg@ea.com>:
1865 * ppc-opc.c (extract_bdm): Correct parenthezisation.
1866 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
1867 value.
1868
669124ef
ILT
1869Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
1870
1871 * ppc-opc.c: Changes based on patch from David Edelsohn
1af6f4bb 1872 <edelsohn@mhpcc.edu>.
669124ef
ILT
1873 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
1874 SPR.
1875 (FXM_MASK): Define.
1876 (insert_tbr): New static function.
1877 (extract_tbr): New static function.
1878 (XFXFXM_MASK, XFXM): Define.
1879 (XSPRBAT_MASK, XSPRG_MASK): Define.
1880 (powerpc_opcodes): Add instructions to access special registers by
1881 name. Add mtcr and mftbu.
1882
1883Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
1884
1885 * mips-opc.c (P3): Define.
1886 (mips_opcodes): Add mad and madu.
1887
9f744f91
SC
1888Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
1889
1890 * configure.in: Add W65 support.
1891 * disassemble.c: Likewise.
1892 * w65-opc.h, w65-dis.c: New files.
1893
d383e289
SC
1894Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1895
1896 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
1897 immediates.
1898
1899start-sanitize-arc
1900Tue Dec 20 10:36:55 1994 Doug Evans <dje@canuck.cygnus.com>
1901
1902 * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
1903 slot.
1904 * arc-opc.c (extract_reladdr): New function.
1905 (insert_reladdr): Store address right-shifted by 2.
1906end-sanitize-arc
1907
27faaa41
ILT
1908Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1909
1910 * mips-opc.c: Add dli as a synonym for li.
1911
edb35c13
DE
1912start-sanitize-arc
1913Mon Dec 19 12:35:51 1994 Doug Evans <dje@canuck.cygnus.com>
1914
1915 * arc-opc.c (insertion fns): Pass pointer to value's table entry.
1916 All uses changed.
1917 (extraction fns): Insn argument now array of two words. Return pointer
1918 to value's table entry. All uses changed.
1919 (arc_opcode_lookup_suffix): Exported for arc-dis.c.
1920 (insert_multshift, extract_multshift): New fns.
1921 (arc_operands): Add support for cache bypass suffix. Add support for
1922 predefined aux regs. Modifier bits moved to flags field.
1923 (arc_opcodes): Likewise.
1924 Add mul/mulu/shift insns. Syntax of zero/sign extension insns changed.
1925 New insn rlc. Update to syntax in programmer's manual.
1926 (arc_reg_names): Fix typo in lp_count. Add predefined aux regs.
1927 (arc_suffixes): New synonyms lo,hs for cs,cc. New suffix for cache
1928 bypass.
1929 (arc_opcode_init_tables): New argument to indicate cpu type.
1930 (insert_reg): Handle predefined aux regs.
1931 (extract_reg): Likewise.
1932 (lookup_register): New fn.
1933 * arc-dis.c (arc_condition_codes): Deleted.
1934 (print_insn_arc): Handle insns with 32 bit immediate constants better.
1935 Clean up modifier handling. Handle predefined aux regs.
1936end-sanitize-arc
1937
a8732972
KR
1938Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1939
1940 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
1941 print something for reserved opcode values, even if it won't
1942 assemble again.
1943
1944 * mips-dis.c (_print_insn_mips): When initializing, shift right
1945 and mask, to avoid sign extension problems on the Alpha.
1946
1947 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
1948 control registers.
1949
1950start-sanitize-arc
1951Tue Nov 29 18:02:43 1994 Doug Evans <dje@canuck.cygnus.com>
1952
1953 * configure.in: Add ARC support.
1954 * disassemble.c: Likewise.
1955 * arc-dis.c, arc-opc.c: New files.
1956end-sanitize-arc
1957
a90a64c1
SC
1958Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1959
1960 * sh-opc.h (mov.l gbr): Get direction right.
1961 * sh-dis.c (print_insn_shx): New function.
1962 (print_insn_shl, print_insn_sh): Call print_insn_shx to
1963 print opcodes with right byte order.
1964
1965Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1966
1967 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
1968 to avoid conflicts with getopt.
1969
dded3d14
ILT
1970Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1971
1972 * hppa-dis.c (print_insn_hppa): Read the instruction using
1973 bfd_getb32, so that it works on a little endian or 64 bit host.
1974 Remove unused local variable op.
1975
cd4b8926
ILT
1976Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1977
1978 * mips-opc.c: Use or instead of addu for pseudo-op move, since
1979 addu does not work correctly if -mips3.
1980
009946c9
ILT
1981Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1982
1983 * a29k-dis.c (print_special): Add special register names defined
1984 on 29030, 29040 and 29050.
1985 (print_insn): Handle new operand type 'I'.
1986
1987Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1988
1989 * Makefile.in (INSTALL): Use top level install.sh script.
1990
1991Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1992
1993 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
1994 that it works on a little endian host.
1995
995b0d3f
ILT
1996Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1997
1998 * configure.in: Use ${config_shell} when running config.bfd.
1999
2000Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2001
2002 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
2003
e96a2b1d
ILT
2004Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2005
2006 * a29k-dis.c (print_insn): Print the opcode.
2007
84909073
ILT
2008Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2009
2010 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
2011
da233e6e
JL
2012Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
2013
2014 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
2015
942a4965
ILT
2016Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2017
2018 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
2019 which store a value into memory.
2020
2021Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
318b02b6
KR
2022
2023 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
2024 * arm-dis.c, arm-opc.h: New files.
2025
2026Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
2027
2028 * Makefile.in (ns32k-dis.o): Add dependency.
2029 * ns32k-dis.c (print_insn_arg): Declare initialized local as
2030 string, not as array of chars.
2031
c4396c87
KR
2032Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2033
2034 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
2035
2036 * sparc-opc.c: Added sparclite extended FP operations, and
2037 versions of v9 impdep* instructions permitting specification of
2038 the OPF field.
2039
2a097d73
KR
2040Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2041
2042 * i960-dis.c (reg_names): Now const.
2043 (struct sparse_tabent): New type, copied from array type in mem
2044 function.
2045 (ctrl): Local static array ctrl_tab now const.
2046 (cobr): Local static array cobr_tab now const.
2047 (mem): Local variables reg1, reg2, reg3 now point to const. Local
2048 static variable mem_tab no longer explicitly initialized. Changed
2049 mem_init to const array of struct sparse_tabent.
2050 (reg): Local static variable reg_tab no longer explicitly
2051 initialized. Changed reg_init to const array of struct
2052 sparse_tabent.
2053 (ea): Local static array scale_tab now const.
2054
315f8809 2055 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
2a097d73 2056 (REG_MAX): Updated.
2a097d73 2057
f61ca5fa
KR
2058Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
2059
2060 * configure.bat: the disassember needs to be enabled for
2061 "objdump -d" to work in djgpp.
2062
69bb683c
KR
2063Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2064
2065 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
2066 (invalid_float): Enabled general version, doesn't require running
60a70a7b
KR
2067 on ns32k host. Changed to take char* argument, and test for
2068 explicitly specified sizes, instead of using sizeof() on host CPU
2069 types.
2070 (INVALID_FLOAT): Cast first argument.
f61ca5fa
KR
2071 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
2072 list_P032, list_M032): Now const.
2073 (optlist, list_search): Made appropriate arguments now point to
2074 const.
2075 (print_insn_arg): Changed static array of one-character-string
2076 pointers into a static const array of characters; fixed sprintf
2077 statement accordingly.
69bb683c
KR
2078
2079Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
2080
2081 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
2082 from distribution. A ns32k-dis.c from a previous distribution has
2083 been brought up to date and supports the new interface.
2084
318b02b6 2085 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
69bb683c
KR
2086
2087 * configure.in: add bfd_ns32k_arch target support.
2088
2089 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
2090 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
2091
2092Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
2093
2094 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
2095 disassembly right.
2096
fea3fe64
SS
2097Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
2098
2099 * h8300-dis.c, mips-dis.c: Don't use true and false.
2100
2101Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
2102
2103 * configure.in: Change --with-targets to --enable-targets.
2104
72fcd790
ILT
2105Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2106
2107 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
2108 opcodes to the first instruction with that opcode, to speed
2109 disassembly of large files. From ralphc@pyramid.com (Ralph
2110 Campbell).
2111
2112Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2113
2114 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
2115
c06e55d9
KR
2116Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
2117
2118 * configure.bat: update to latest makefile.in
2119
2120Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
2121
2122 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
2123 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
2124 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
2125 slot insn is in a delay slot.
2126 * z8k-opc.h: (resflg): Fix patterns.
2127 * h8500-opc.h Fix CR insn patterns.
2128
2129Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2130
2131 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
2132 "cmpl" before POWER versions, so that gas -many uses them.
2133
7495f83b
KR
2134Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2135
c06e55d9
KR
2136 * disassemble.c: New file.
2137 * Makefile.in (OFILES): Add disassemble.o.
2138 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
2139 * configure.in: Define ARCHDEFS in Makefile. Code taken from
2140 binutils/configure.in.
2141
7495f83b
KR
2142 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
2143 opcode being examined.
2144
2145Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2146
2147 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
2148 (insert_ral, insert_ram, insert_ras): New functions.
2149 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
2150 RAS for store with update.
2151
8c546ded
ILT
2152Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2153
2154 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
2155 (edelsohn@npac.syr.edu).
2156
76336d50
ILT
2157Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2158
2159 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
2160 immediate argument.
2161
8055d512
DE
2162Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
2163
2164 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
2165
749a663d
ILT
2166Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2167
2168 * ppc-opc.c (powerpc_operands): The signedp field has been
2169 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
2170 instead. Add new operand SISIGNOPT.
2171 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
2172 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
2173 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
2174 than signedp field.
2175
878db64d
PS
2176Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2177
2178 * i386-dis.c (struct private): Renamed to dis_private. `private'
2179 is a reserved word for dynix cc.
2180
934ec70a
ILT
2181Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2182
2183 * configure.in: Change error message to refer to bfd/config.bfd
2184 rather than bfd/configure.in.
2185
54192495
ILT
2186Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
2187
2188 * ppc-opc.c: Define POWER2 as short alias flag.
2189 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
2190 fsqrt.
2191
2192Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2193
2194 * i960-dis.c (print_insn_i960): Don't read a second word for
2195 opcodes 0, 1, 2 and 3.
2196
2197Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2198
2199 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
2200
448ff992
ILT
2201Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2202
c0386c7a
ILT
2203 * m68881-ext.c: Removed; no longer used.
2204 * Makefile.in: Changed accordingly.
2205
448ff992
ILT
2206 * m68k-dis.c (ext_format_68881): Don't declare.
2207 (print_insn_m68k): If an instruction uses place 'i', it uses at
2208 least four fixed bytes.
2209 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
2210 extended float, convert to double using floatformat_to_double, not
2211 ieee_extended_to_double, and fetch the data before converting it.
2212
d75eb68c
ILT
2213Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2214
2215 * mips-opc.c: It's sqrt.s, not sqrt.w. From
2216 davidj@ICSI.Berkeley.EDU (David Johnson).
2217
9a458b67
ILT
2218Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2219
2220 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
2221 PowerPC uses bdnz[l][a].
2222
5c9b5f58
PS
2223Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2224
4dd4933e 2225 * dis-buf.c, i386-dis.c: Include sysdep.h.
5c9b5f58
PS
2226
2227Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2228
2229 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
2230
2231 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
2232 by Motorola PowerPC 601 with PPC_OPCODE_601.
2233 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
2234 Disassemble Motorola PowerPC 601 instructions as well as normal
2235 PowerPC instructions.
2236
9f80c72b
JK
2237Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
2238
2239 * i960-dis.c (reg, mem): Just use a static array instead of
2240 calling xmalloc.
2241
e3960b96
JL
2242Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2243
0bb364c6
JL
2244 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
2245 condition name index if this is for a negated condition.
2246
e59f3227
JL
2247 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
2248 Floating point format for 'H' operand is backwards from normal
2249 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
2250 operands (fmpyadd and fmpysub), handle bizarre register
2251 translation correctly for single precision format.
2252
e3960b96
JL
2253 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
2254 or 'I' operands if the next format specifier is 'M' (fcmp
2255 condition completer).
2256
2257Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1c214e4c
ILT
2258
2259 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
2260 single number giving a bitmask for the MB and ME fields of an M
2261 form instruction. Change NB to accept 32, and turn it into 0;
2262 also turn 0 into 32 when disassembling. Seperated SH from NB.
2263 (insert_mbe, extract_mbe): New functions.
2264 (insert_nb, extract_nb): New functions.
2265 (SC_MASK): Mask out SA and LK bits.
2266 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
2267 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
2268 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
2269 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
2270 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
2271 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
2272 (powerpc_macros): Define table of macro definitions.
2273 (powerpc_num_macros): Define.
2274
2275 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
2276 if PPC_OPERAND_NEXT is set.
2277
2278Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2279
2280 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
2281 char. Retrieve contents using bfd_getl32 instead of shifting.
2282
1211751d
ILT
2283Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2284
2285 * ppc-opc.c: New file. Opcode table for PowerPC, including
2286 opcodes for POWER (RS/6000).
2287 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
2288 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
2289 (CFILES): Add ppc-dis.c.
2290 (ppc-dis.o, ppc-opc.o): New targets.
2291 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
2292
f037e5b0
JL
2293Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2294
2295 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
2296 No space before 'u', 'f', or 'N'.
2297
a279b1f5
JK
2298Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
2299
4baf1a8c
JK
2300 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
2301 farther than we should.
2302
a279b1f5
JK
2303 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
2304
2305Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2306
2307 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
2308
2309Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2310
2311 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
2312 needs it, to prevent reading past the end of a section.
2313
2314Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2315
2316 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
2317 Removed t,A case for la; always use t,A(b) case.
2318
2319Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2320
2321 From Ted Lemen <mellon@pepper.ncd.com>
2322 * mips-dis.c (print_insn_arg): Handle 'k'.
2323 * mips-opc.c: Make cache use k, not t.
2324
ba936a2e
PS
2325Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2326
2327 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
2328 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
2329 FLOAT_FORMAT_CODE to put out floating point register names.
2330
2331Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2332
2333 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
2334
bf04fba0
JK
2335Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2336
2337 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
2338
70643dbc
ILT
2339Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2340
2341 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
2342 larger than 32. Moved dsxx32 variants first for disassembler.
2343
07bf1ce5
SC
2344Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2345
2346 * z8kgen.c, z8k-opc.h: Add full lda information.
2347
2348Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
2349
2350 * hppa-dis.c (print_insn_hppa): Do not emit a space after
2351 movb instructions. Any necessary space will be emitted by
2352 the code to handle nullification completers.
2353
2354Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2355
2356 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
2357
bb959d0a
PS
2358Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2359
2360 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
2361 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
2362
9978cd4d
ILT
2363Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2364
2365 * mips-opc.c: Correct lwu opcode value (book had it wrong).
2366
2367Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2368
2369 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
2370 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
2371
cb79d01d
RP
2372Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
2373
2374 * m88k-dis.c (m88kdis): comment change. Remove space after
2375 printing mnemonic.
2376 (printop): handle new arg types DEC and XREG for m88110.
2377
a0ad6c0f
JK
2378Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
2379
2380 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
2381 type for absolute branch addresses. Delete special
2382 "ble" and "be" code in 'W' operand code.
2383
2384Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2385
2386 * mips-opc.c: Set hazard information correctly for branch
2387 likely instructions.
2388
2389Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2390
2391 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
2392 info->fprintf_func for printing and info->print_address_func for
2393 address output.
2394
2395Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2396
2397 * mips-opc.c: Set INSN_TRAP for tXX instructions.
2398
2399Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2400
2401 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
2402 Corrected second case of "b" for disassembler.
2403
44647fcc
ILT
2404Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2405
2406 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
2407 to BFD swapping routines to correspond to BFD name changes.
2408
a9c686ad
ILT
2409Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2410
547998d2
ILT
2411 * mips-opc.c: Change div machine instruction to be z,s,t rather
2412 than s,t. Change div macro to be d,v,t rather than d,s,t.
2413 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
2414 rem and remu which generates only the corresponding div
2415 instruction. This is for compatibility with the MIPS assembler,
2416 which only generates the simple machine instruction when an
2417 explicit destination of $0 is used.
2418 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
a9c686ad 2419
a5ba0d3f
ILT
2420Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2421
2422 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
2423 WR_31 hazard for bal, bgezal, bltzal.
2424
2425Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2426
2427 * hppa-dis.c (print_insn_hppa): Use print function
2428 from within the disassemble_info, not fprintf_filtered.
2429
2430Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2431
2432 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
2433 Law, law@cs.utah.edu.)
2434
320cdccf
ILT
2435Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2436
2437 * mips-opc.c ("absu"): Removed.
2438 ("dabs"): Added.
2439
2bef2d3e
ILT
2440Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2441
2442 * mips-opc.c: Added r6000 and r4000 instructions and macros.
2443 Changed hazard information to distinguish between memory load
2444 delays and coprocessor load delays.
2445
45b14705
ILT
2446Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2447
2448 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
2449
ed2fe80f
DM
2450Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2451
2452 * configure.in: Don't pass cpu to config.bfd.
2453
e9a30357
ILT
2454Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2455
2456 * m88k-dis.c (m88kdis): Make class unsigned.
2457
2458Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
2459
2460 * alpha-dis.c (print_insn_alpha): One branch format case was
2461 missing the instruction name.
2462
2463Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2464
2465 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
2466 Add the arch-specific auxiliary files.
2467 (OFILES): Remove the arch-specific auxiliary files
2468 and use BFD_MACHINES instead of DIS_LIBS.
2469 * configure.in: Set BFD_MACHINES based on --with-targets option.
2470
786e4f1a
ILT
2471Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2472
2473 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
2474 for swc1.
2475
2476Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2477
2478 * sparc-opc.c: Change CONST to const to deal with gcc
2479 -Dconst=__const -traditional.
2480
11a0aaa7
ILT
2481Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2482
2483 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
2484 coprocessor instructions out of #if 0, and made them use new
2485 argument type "C".
2486
071689e1
JK
2487Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2488
2489 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
2490
2491Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
2492
2493 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
2494 instruction, for use by the disassembler.
2495
2496 * sparc-dis.c (SEX): Add sign extension macro. Replace many
2497 hand-coded sign extensions that depended on 32-bit host ints.
2498 FIXME, we still depend on big-endian host bitfield ordering.
2499 (sparc_print_insn): Set the insn_info_valid field, and the
2500 other fields that describe the instruction being printed.
2501
2502Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
2503
2504 * sparc-opc.c (call): Accept all 6 addressing modes valid for
2505 `jmp' instead of just one of them.
2506
4d135f1c
JK
2507Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
2508
071689e1
JK
2509 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
2510 (fput_fp_reg_r): Renamed from fput_reg_r.
2511 (fput_fp_reg): New function.
2512 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
2513
4d135f1c
JK
2514 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
2515
2516 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
2517
17068960
JK
2518Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
2519
b2ad2e64
JK
2520 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
2521
981b3a27
JK
2522 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
2523 don't output a space.
2524
17068960
JK
2525 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
2526
32d2052a
JK
2527Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
2528
2529 * mips-opc.c: New file, containing opcode table from
2530 ../include/opcode/mips.h.
2531 * Makefile.in: Add it.
2532
a4c01299
ILT
2533Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2534
2535 * m88k-dis.c: New file, moved in from gdb and changed to use the
2536 new dis-asm.h disassembler interface.
2537 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
2538 (m88k-dis.o): New target.
2539
37609724
ILT
2540Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
2541
2542 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
2543 argument string const char * to correspond to opcode/mips.h.
2544
fde326fb
ILT
2545Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
2546
2547 * mips-dis.c: Updated to account for name changes in new version
2548 of opcode/mips.h.
2549 * Makefile.in: Added header file dependencies.
2550
a5b5f81d
DE
2551Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
2552
2553 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
2554
2555Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2556
2557 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
2558 extend, rather than shifts.
2559
2560Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
2561
2562 * Makefile.in: Undo 15 June change.
2563
5b6c6336
PB
2564Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
2565
2566 * m68k-dis.c (print_insn_arg): Change return value to byte count
2567 or error code.
2568 * m68k-dis.c: Re-write to detect invalid operands before
2569 printing anything, so we can handle this the same way we
2570 handle invalid opcodes.
2571
219cf232
SC
2572Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2573
2574 * sh-dis.c, sh-opc.h: Understand some more opcodes.
2575
91ea6ab0
ILT
2576Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
2577
2578 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
2579 header files.
2580
0a3c15c3
KR
2581Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2582
2583 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
2584
2585 * configure.in: Do make sysdep.h link.
2586 * Makefile.in: Search ../include. Don't search ../bfd.
2587
5aef7c67
SG
2588Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
2589
2590 Changes from Jeff Law, law@cs.utah.edu:
2591 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
2592 Do not print a space before the completers specified by
2593 'a' and 'd'.
2594
112087ed
KR
2595Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
2596
998f2ef3
KR
2597 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
2598 defined, since gdb has been fixed.
2599
112087ed
KR
2600 Changes from Jeff Law, law@cs.utah.edu:
2601 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
2602 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
2603 be a *disassemble_info, not a *FILE.
2604 * hppa-dis.c: Support 'd', '!', and 'a'.
2605 * hppa-dis.c: Support 's' to extract a 2 bit space register.
2606 * hppa-dis.c: Delete cases which are no longer needed.
2607
e6fb7139
JK
2608Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
2609
2610 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
2611
2612Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2613
2614 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
2615 H8/300-H opcodes.
2616
e0a8bcfb
PB
2617Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
2618
2619 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
2620 * configure.in: No longer need to configure to get sysdep.h.
2621
2622Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
2623
2624 * Patches from Jeffrey Law <law@cs.utah.edu>.
2625 * hppa-dis.c: Support 'I', 'J', and 'K' in output
2626 templates for 1.1 FP computational instructions.
2627
2628Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2629
2630 * h8500-dis.c (print_insn_h8500): Address argument is type
2631 bfd_vma.
2632 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
2633 Ditto.
2634
2635 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
2636 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
2637
2638 * sparc-dis.c (compare_opcodes): Move static declaration to
2639 top-level.
2640
2641Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2642
2643 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
2644 instruction, remove unimp hack from 'l' argument.
2645
2646Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
2647
2648 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
2649 happy.
2650
2651Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
2652
2653 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
2654 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
2655 instructions.
2656
cfa8d061
KR
2657Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2658
d698222b
KR
2659 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
2660 arrays of string pointers to 2-d arrays of chars, to save
2661 space.
cfa8d061
KR
2662
2663Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
2664
2665 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
2666 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
2667
2668Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2669
2670 * hppa-dis.c: New file from Utah, adapted to new disassembler
2671 calling interface.
2672 * Makefile.in: Include it.
2673
2674Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2675
2676 * sh-dis.c, sh-opc.h: New files.
2677
2678Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2679
2680 * alpha-dis.c, alpha-opc.h: New files.
2681
2682Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2683
2684 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
2685 value.
2686
d802b948
JG
2687Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
2688
2689 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
2690
2691Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
2692
2693 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
2694 const.
2695
720b3aed
JK
2696Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
2697
2698 * sparc-dis.c: Use fprintf_func a few places where I forgot,
2699 and double percent signs a few places.
2700
2701 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
2702
2703 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
2704 Use info->print_address_func not print_address.
2705
2706 * dis-buf.c (generic_print_address): New function.
2707
f7ed13c7
JK
2708Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2709
2710 * Makefile.in: Add sparc-dis.c.
2711 sparc-dis.c: New file, merges binutils and gdb versions as follows:
2712 From GDB:
2713 Add `add' instruction to the set that get checked
2714 for a preceding `sethi' in order to print an absolute address.
2715 * (print_insn): Disassembly prefers real instructions.
2716 (is_delayed_branch): Speed up.
2717 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
2718 Still missing some float ops, and needs testing.
2719 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
2720 F_ALIAS. Use printf, not fprintf, when not passing a file
2721 pointer...
2722 (compare_opcodes): Check that identical instructions have
2723 identical opcodes, complain otherwise.
2724 From binutils:
2725 * New 'm' arg.
2726 * Include reg_names.
2727 From neither:
2728 Use dis-asm.h/read_memory_func interface.
2729
05545edc
RP
2730Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
2731
2732 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
2733 deliberately return non-zero to setjmp from longjmp. Otherwise
2734 this code fails to compile.
2735
cbe61cc6
SG
2736Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
2737
2738 * m68k-dis.c: Fix prototype for fetch_arg().
2739
5d0734a7
JK
2740Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2741
2742 * dis-buf.c: New file, for new read_memory_func interface.
2743 Makefile.in (OFILES): Include it.
2744 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
2745 Use new read_memory_func interface.
2746
2747Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2748
2749 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
2750 * h8500-opc.h: Fix couple of opcodes.
2751
2752Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
2753
2754 * Makefile.in: add dvi & installcheck targets
2755
2cb563e6
JG
2756Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
2757
2758 * Makefile.in: Update for h8500-dis.c.
2759
337110ea
SC
2760Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2761
2762 * h8500-dis.c, h8500-opc.h: New files
2763
c840244e
PB
2764Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
2765
2766 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
2767 ../include/dis-asm.h.
2768 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
2769 and ../gdb/m68k-pinsn.c).
2770 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
2771 and ../gdb/i386-pinsn.c).
2772 * m68881-ext.c: New file. Moved definition of
2773 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
2774 * Makefile.in: Adjust for new files.
2775 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
2776 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
2777 can be dis-assembled.
2778
2779Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2780
2781 * mips-dis.c (print_insn_arg): Now returns void.
2782
2783Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
2784
2785 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
2786 files that use the macros.
2787
2788Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2789
2790 * mips-dis.c: New file, from gdb/mips-pinsn.c.
2791 * Makefile.in (DIS_LIBS): Added mips-dis.o.
2792 (CFILES): Added mips-dis.c.
2793
2794Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2795
2796 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
2797 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
2798
2799Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
2800
2801 * Makefile.in: Improve *clean rules.
2802 * configure.in: Allow a default host.
2803
2804Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2805
2806 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
2807 files include other sysdep files
2808
2809Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2810
2811 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
2812
2813Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
2814
2815 * configure.in: For host support, use ../bfd/configure.host
2816 so it stays in sync with the ../bfd/hosts database.
2817
d5dcef63
DZ
2818Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2819
2820 * configure.in: use cpu-vendor-os triple instead of nested cases
2821
0843ea63
MW
2822Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
2823
2824 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
2825 *always* the wrong one.
2826
b31a1f81
SC
2827Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2828
2829 * z8kgen.c: added copyright info
2830
447bbbea
SC
2831Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2832
2833 * z8k-dis.c (unparse_instr): prettier tabs
2834 * z8kgen.c -> z8k-opc.h: bug fixes in tables
2835
57cae454
SG
2836Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
2837
2838 * configure.in: Add ncr* configuration.
2839 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
2840 picayune ANSI compilers happy.
2841
2842Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
2843
2844 * configure.in (i386): Make i386 and i486 synonymous for now.
2845 * configure.in (i[34]86-*-sysv4): Add my_host definition.
2846
3a157902
KR
2847Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2848
2849 * Makefile.in (install): Fix typo.
2850
68ca3238
JG
2851Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
2852
2853 * Makefile.in (make): Remove obsolete crud.
2854 (sparc-opc.o): Avoid Sun Make VPATH bug.
2855
e5bc6aaf
RP
2856Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
2857
2858 * Makefile.in: since there are no SUBDIRS, remove rule and
68ca3238 2859 references of subdir_do.
e5bc6aaf 2860
794a16b0
KR
2861Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2862
2863 * Makefile.in (install): Get the library name right here too.
2864 Don't install bfd.h, since it's unrelated to this library. No
2865 subdirs to recurse into, either.
2866 (CFILES): The source file has a .c suffix, not .o.
2867
2868 * sparc-opc.c: New file, moved from BFD.
2869 * Makefile.in (OFILES): Build it.
2870
2871Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
2872
2873 * z8k-dis.c: fixed forward refferences of some declarations.
2874
2875Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
2876
2877 * Makefile.in: get the name of the library right
2878
a4ccc310
SC
2879Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2880
add1fb05 2881 * z8k-dis.c: knows how to disassemble z8k stuff
a4ccc310
SC
2882 * z8k-opc.h: new file full of z8000 opcodes
2883
9a458b67
ILT
2884\f
2885Local Variables:
2886version-control: never
2887End:
This page took 0.454819 seconds and 4 git commands to generate.