Commit | Line | Data |
---|---|---|
c48244a5 SP |
1 | 2009-11-06 Sebastian Pop <sebastian.pop@amd.com> |
2 | ||
3 | * i386-dis.c (reg_table): Add XOP_8F_TABLE (XOP_09) to | |
4 | reg_table[REG_8F][1]: for XOP instructions, ModRM.reg first points to | |
5 | B.mm in the RXB.mmmmm byte, and so when B is set, we still should use | |
6 | the xop_table. | |
7 | (get_valid_dis386): Removed unused condition (from cut/n/paste) for | |
8 | XOP instructions. | |
9 | ||
f88c9eb0 SP |
10 | 2009-11-05 Sebastian Pop <sebastian.pop@amd.com> |
11 | Quentin Neill <quentin.neill@amd.com> | |
12 | ||
13 | * opcodes/i386-dis.c (OP_LWPCB_E): New. | |
14 | (OP_LWP_E): New. | |
15 | (OP_LWP_I): New. | |
16 | (USE_XOP_8F_TABLE): New. | |
17 | (XOP_8F_TABLE): New. | |
18 | (REG_XOP_LWPCB): New. | |
19 | (REG_XOP_LWP): New. | |
20 | (XOP_09): New. | |
21 | (XOP_0A): New. | |
22 | (reg_table): Redirect REG_8F to XOP_8F_TABLE. | |
23 | Add entries for REG_XOP_LWPCB and REG_XOP_LWP. | |
24 | (xop_table): New. | |
25 | (get_valid_dis386): Handle USE_XOP_8F_TABLE. | |
26 | Use the offsets VEX_0F, VEX_0F38, and VEX_0F3A instead of their values | |
27 | to access to the vex_table. | |
28 | (OP_LWPCB_E): New. | |
29 | (OP_LWP_E): New. | |
30 | (OP_LWP_I): New. | |
31 | * opcodes/i386-gen.c (cpu_flag_init): Add CPU_LWP_FLAGS, CpuLWP. | |
32 | (cpu_flags): Add CpuLWP. | |
33 | (opcode_modifiers): Add VexLWP, XOP09, and XOP0A. | |
34 | * opcodes/i386-opc.h (CpuLWP): New. | |
35 | (i386_cpu_flags): Add bit cpulwp. | |
36 | (VexLWP): New. | |
37 | (XOP09): New. | |
38 | (XOP0A): New. | |
39 | (i386_opcode_modifier): Add vexlwp, xop09, and xop0a. | |
40 | * opcodes/i386-opc.tbl (llwpcb): Added. | |
41 | (lwpval): Added. | |
42 | (lwpins): Added. | |
43 | ||
0d734b5d DD |
44 | 2009-11-04 DJ Delorie <dj@redhat.com> |
45 | ||
46 | * rx-decode.opc (rx_decode_opcode) (mvtipl): Add. | |
47 | (mvtcp, mvfcp, opecp): Remove. | |
48 | * rx-decode.c: Regenerate. | |
49 | * rx-dis.c (cpen): Remove. | |
50 | ||
d51b88d3 DE |
51 | 2009-11-03 Doug Evans <dje@sebabeach.org> |
52 | ||
53 | * m32c-desc.c: Regenerate. | |
54 | * mep-desc.c: Regenerate. | |
55 | ||
62f3b8c8 PB |
56 | 2009-11-02 Paul Brook <paul@codesourcery.com> |
57 | ||
58 | * arm-dis.c (coprocessor_opcodes): Update to use new feature flags. | |
59 | Add VFPv4 instructions. | |
60 | ||
206c2556 L |
61 | 2009-10-29 Sebastian Pop <sebastian.pop@amd.com> |
62 | ||
63 | * i386-dis.c (OP_VEX_FMA): Removed. | |
64 | (VexFMA): Removed. | |
65 | (Vex128FMA): Removed. | |
66 | (prefix_table): First source operand of FMA4 insns is decoded | |
67 | with Vex not with VexFMA. | |
68 | (OP_EX_VexW): Second source operand is decoded with get_vex_imm8 | |
69 | when vex.w is set. Third source operand is decoded with | |
70 | ||
a2b2318d AM |
71 | 2009-10-27 Alan Modra <amodra@bigpond.net.au> |
72 | ||
73 | * Makefile.am (HFILES): Remove cgen-ops.h and cgen-types.h. | |
74 | * Makefile.in: Regenerate. | |
75 | * po/POTFILES.in: Regenerate. | |
76 | ||
ac1e9eca DE |
77 | 2009-10-23 Doug Evans <dje@sebabeach.org> |
78 | ||
79 | * cgen-ops.h: Delete, moved to ../include/cgen/basic-ops.h. | |
80 | * cgen-types.h: Delete, moved to ../include/cgen/basic-modes.h. | |
81 | * cgen-bitset.c: Update. | |
82 | * fr30-desc.h: Regenerate. | |
83 | * frv-desc.h: Regenerate. | |
84 | * ip2k-desc.h: Regenerate. | |
85 | * iq2000-desc.h: Regenerate. | |
86 | * lm32-desc.h: Regenerate. | |
87 | * m32c-desc.h: Regenerate. | |
88 | * m32c-opc.h: Regenerate. | |
89 | * m32r-desc.h: Regenerate. | |
90 | * mep-desc.h: Regenerate. | |
91 | * mt-desc.h: Regenerate. | |
92 | * openrisc-desc.h: Regenerate. | |
93 | * xc16x-desc.h: Regenerate. | |
94 | * xstormy16-desc.h: Regenerate. | |
95 | ||
f282425e DD |
96 | 2009-10-22 DJ Delorie <dj@redhat.com> |
97 | ||
98 | * rx-decode.opc (decode_opcode): Fix flags for MUL, SUNTIL, and SWHILE. | |
99 | * rx-decode.c: Regenerated. | |
100 | ||
4b06377f L |
101 | 2009-10-20 H.J. Lu <hongjiu.lu@intel.com> |
102 | ||
103 | PR gas/10775 | |
104 | * i386-dis.c: Document LB, LS and LV macros. | |
105 | (dis386): Use mov%LB, mov%LS and mov%LV on mov instruction | |
106 | with the 64-bit displacement or immediate operand. | |
107 | (putop): Handle LB, LS and LV macros. | |
108 | ||
cedb97b6 DE |
109 | 2009-10-18 Doug Evans <dje@sebabeach.org> |
110 | ||
111 | * lm32-opinst.c: Regenerate. | |
112 | * m32c-desc.c: Regenerate. | |
113 | * m32r-opinst.c: Regenerate. | |
114 | * openrisc-ibld.c: Regenerate. | |
115 | * xc16x-desc.c: Regenerate. | |
116 | * xc16x-desc.h: Regenerate. | |
117 | ||
d1119f7a DE |
118 | 2009-10-17 Doug Evans <dje@sebabeach.org> |
119 | ||
120 | * Makefile.am (CGEN_CPUS): Add iq2000, lm32. | |
121 | (FR30_DEPS, FRV_DEPS, IQ2000_DEPS): Move so all cgen *_DEPS are | |
122 | sorted alphabetically. | |
123 | (stamp-fr30, stamp-frv, stamp-iq2000, stamp-xc16x): Move so all cgen | |
124 | stamp-* rules are sorted alphabetically. | |
125 | * Makefile.in: Regenerate. | |
126 | ||
52a6c1fe L |
127 | 2009-10-16 H.J. Lu <hongjiu.lu@intel.com> |
128 | ||
129 | * i386-opc.h: Use enum instead of nested macros. | |
130 | ||
3873ba12 L |
131 | 2009-10-16 H.J. Lu <hongjiu.lu@intel.com> |
132 | ||
133 | * i386-dis.c: Simplify enums. | |
134 | ||
51e7da1b L |
135 | 2009-10-15 H.J. Lu <hongjiu.lu@intel.com> |
136 | Ineiev <ineiev@gmail.com> | |
137 | ||
138 | PR binutils/10767 | |
139 | * i386-dis.c: Use enum instead of nested macros. | |
140 | ||
c39846ed L |
141 | 2009-10-15 H.J. Lu <hongjiu.lu@intel.com> |
142 | ||
143 | * i386-dis.c (MAX_BYTEMODE): Removed. | |
144 | ||
6a327e17 AM |
145 | 2009-10-14 Tomas Hurka <tom@hukatronic.cz> |
146 | ||
147 | PR 969 | |
148 | * m68k-opc.c (m68k_opcodes): Correct mask for macl and msacl. | |
149 | ||
55b126d4 L |
150 | 2009-10-13 H.J. Lu <hongjiu.lu@intel.com> |
151 | ||
152 | * i386-dis.c (print_insn): Always clear need_vex, need_vex_reg | |
153 | and vex_w_done. | |
154 | ||
ef299415 ME |
155 | 2009-10-07 Michael Eager <eager@eagercon.com> |
156 | ||
55b126d4 | 157 | * microblaze-dis.c: Add include for microblaze-dis.h, |
ef299415 | 158 | eliminate local extern decls. |
55b126d4 | 159 | * microblaze-dis.h: New. |
ef299415 | 160 | |
245caaea NC |
161 | 2009-10-06 Nick Clifton <nickc@redhat.com> |
162 | ||
163 | * po/fi.po: Updated Finnish translation. | |
164 | ||
49293ef7 NC |
165 | 2009-10-03 Andreas Schwab <schwab@linux-m68k.org> |
166 | ||
167 | * opc2c.c: Include "libiberty.h" and <errno.h>. | |
168 | (orig_filename): Constify. | |
169 | (dump_lines): Fix line number directive. | |
170 | (main): Set orig_filename to basename of input file. Use | |
171 | xstrerror. | |
172 | ||
173 | * Makefile.am (rx-dis.lo): Remove explicit dependencies. | |
174 | ($(srcdir)/rx-decode.c): Use @MAINT@. Use $(EXEEXT_FOR_BUILD) | |
175 | instead of $(EXEEXT). | |
176 | (opc2c$(EXEEXT_FOR_BUILD)): Renamed from opc2c$(EXEEXT) and use | |
177 | $(LINK_FOR_BUILD). Link with libiberty. | |
178 | (MOSTLYCLEANFILES): Add opc2c$(EXEEXT_FOR_BUILD). | |
179 | (MAINTAINERCLEANFILES): Add $(srcdir)/rx-decode.c. | |
180 | * Makefile.in: Regenerated. | |
181 | * rx-decode.c: Regenerated. | |
182 | ||
8977d4b2 AM |
183 | 2009-10-03 Paul Reed <paulreed@paddedcell.com> |
184 | ||
185 | * arm-dis.c (print_insn): Check symtab_size not *symtab. | |
186 | ||
f98fa534 L |
187 | 2009-10-02 H.J. Lu <hongjiu.lu@intel.com> |
188 | ||
189 | * i386-opc.tbl: Drop Disp64 on jump and loop instructions. | |
190 | * i386-tbl.h: Regenerated. | |
191 | ||
9fe54b1c PB |
192 | 2009-10-02 Peter Bergner <bergner@vnet.ibm.com> |
193 | ||
194 | * ppc-dis.c (ppc_opts): Add "476" entry. | |
195 | * ppc-opc.c (PPC476): Define. | |
196 | (powerpc_opcodes): Update mnemonics where required for 476. | |
197 | ||
634b50f2 PB |
198 | 2009-10-01 Peter Bergner <bergner@vnet.ibm.com> |
199 | ||
200 | * ppc-opc.c (PPCA2): Use renamed mask PPC_OPCODE_A2. | |
201 | * ppc-dis.c (ppc_opts): Likewise. | |
202 | Rename "ppca2" to "a2". | |
203 | ||
4ded9dda SR |
204 | 2009-10-01 M R Swami Reddy <MR.Swami.Reddy@nsc.com> |
205 | ||
206 | * crx-dis.c (match_opcode): Truncate mcode to 32-bit. | |
207 | ||
c7927a3c NC |
208 | 2009-09-29 DJ Delorie <dj@redhat.com> |
209 | ||
210 | * Makefile.am: Add RX files. | |
211 | * configure.in: Add support for RX target. | |
212 | * disassemble.c: Likewise. | |
213 | * Makefile.in: Regenerate. | |
214 | * configure: Regenerate. | |
215 | * opc2c.c: New file. | |
216 | * rx-decode.c: New file. | |
217 | * rx-decode.opc: New file. | |
218 | * rx-dis.c: New file. | |
219 | ||
8765b556 PB |
220 | 2009-09-29 Peter Bergner <bergner@vnet.ibm.com> |
221 | ||
222 | * ppc-opc.c (powerpc_opcodes): Remove support for the the "lxsdux", | |
223 | "lxvd2ux", "lxvw4ux", "stxsdux", "stxvd2ux" and "stxvw4ux" opcodes. | |
224 | ||
fe2d172c ME |
225 | 2009-09-25 Michael Eager <eager@eagercon.com> |
226 | ||
e0c483d6 AM |
227 | * microblaze-dis.c (get_insn_microblaze, microblaze_get_target_address, |
228 | microblaze_decode_insn): Add declarations. | |
229 | (get_delay_slots_microblaze): Remove. | |
fe2d172c | 230 | |
21d799b5 NC |
231 | 2009-09-25 Martin Thuresson <martint@google.com> |
232 | ||
e0c483d6 | 233 | Update sources to make arc and arm targets compile cleanly with |
21d799b5 NC |
234 | -Wc++-compat: |
235 | * arc-dis.c Fix casts. | |
236 | * arc-ext.c: Add casts. | |
237 | * arm-dis.c (enum opcode_sentinel_enum): Gave name to anonymous | |
238 | enum. | |
239 | ||
2bf05e57 L |
240 | 2009-09-24 H.J. Lu <hongjiu.lu@intel.com> |
241 | ||
242 | * i386-gen.c (opcode_modifiers): Remove Vex256. | |
243 | (set_bitfield): Handle XXX=V. | |
244 | ||
245 | * i386-opc.h (Vex): Update comments. | |
246 | (Vex256): Removed. | |
247 | (VexNDS): Updated. | |
e0c483d6 | 248 | (i386_opcode_modifier): Change vex to 2 bits. Remove vex256. |
2bf05e57 L |
249 | |
250 | * i386-opc.tbl: Replace "Vex|Vex256" with Vex=2. | |
251 | * i386-tbl.h: Regenerated. | |
252 | ||
8a00d392 NC |
253 | 2009-09-23 Nick Clifton <nickc@redhat.com> |
254 | ||
255 | * po/fr.po: Updated French translation. | |
256 | ||
e0d602ec BE |
257 | 2009-09-21 Ben Elliston <bje@au.ibm.com> |
258 | Peter Bergner <bergner@vnet.ibm.com> | |
259 | ||
260 | * ppc-dis.c (ppc_opts): Add "ppca2" entry. | |
261 | * ppc-opc.c (powerpc_opcodes): Add eratilx, eratsx, eratsx., | |
262 | eratre, wchkall, eratwe, ldawx., mdfcrx., mfdcr. mtdcrx., icswx, | |
263 | icswx., mtdcr., dci, wclrone, wclrall, wclr, erativax, tlbsrx., | |
264 | ici mnemonics. | |
265 | (ERAT_T): New operand. | |
266 | (XWC_MASK): New mask. | |
267 | (XOPL2): New macro. | |
268 | (PPCA2): Define. | |
269 | ||
ca58b19f NC |
270 | 2009-09-18 Nick Clifton <nickc@redhat.com> |
271 | ||
272 | * po/es.po: Updated Spanish translation. | |
273 | * po/vi.po: Updated Vietnamese translation. | |
274 | ||
05203043 L |
275 | 2009-09-15 H.J. Lu <hongjiu.lu@intel.com> |
276 | ||
277 | * i386-dis.c (OP_E_memory): Don't print '-' in Intel mode if | |
278 | disp == -disp. | |
279 | ||
df58f7b0 NC |
280 | 2009-09-14 Nick Clifton <nickc@redhat.com> |
281 | ||
282 | * po/nl.po: Updated Dutch translation. | |
283 | ||
1e9cc1c2 NC |
284 | 2009-09-11 Nick Clifton <nickc@redhat.com> |
285 | ||
286 | * po/opcodes.pot: Updated by the Translation project. | |
287 | ||
288 | 2009-09-11 Martin Thuresson <martint@google.com> | |
289 | ||
290 | Updated sources to compile cleanly with -Wc++-compat: | |
291 | * ld.h (enum endian_enum,enum symbolic_enum,enum dynamic_list_enum): Move to top level. | |
292 | * ldcref.c: Add casts. | |
293 | * ldctor.c: Add casts. | |
294 | * ldexp.c | |
295 | * ldexp.h (enum node_tree_enum,enum phase_enum): Move to top level. | |
296 | * ldlang.c: Add casts. (lang_insert_orphan): Use enum name instead of integer. | |
297 | * ldlang.h (enum statement_enum): Move to top level. | |
298 | * ldmain.c: Add casts. | |
299 | * ldwrite.c: Add casts. | |
300 | * lexsup.c: Add casts. (enum control_enum): Move to top level. | |
301 | * mri.c: Add casts. (mri_draw_tree): Use enum name instead of integer. | |
302 | ||
c8676ae4 | 303 | 2009-09-10 Andreas Krebbel <Andreas.Krebbel@de.ibm.com> |
e0c483d6 | 304 | |
c8676ae4 AK |
305 | * s390-dis.c (print_insn_s390): Avoid 'long long'. |
306 | ||
7330f9c3 | 307 | 2009-09-10 Andreas Krebbel <Andreas.Krebbel@de.ibm.com> |
e0c483d6 | 308 | |
7330f9c3 AK |
309 | * s390-dis.c (s390_extract_operand): Remove the shift for pcrel operands. |
310 | (print_insn_s390): Signextend and shift pcrel operands before printing. | |
311 | ||
9daa0d29 L |
312 | 2009-09-09 H.J. Lu <hongjiu.lu@intel.com> |
313 | ||
314 | * i386-dis.c (vex_len_table): Change VEX_LEN_AE_R_X_M0 to | |
315 | VEX_LEN_AE_R_X_M_0 in comments. | |
316 | ||
495c5f87 DD |
317 | 2009-09-08 DJ Delorie <dj@redhat.com> |
318 | ||
319 | * mep-opc.c: Regenerate. | |
320 | ||
84c71969 AS |
321 | 2009-09-08 Andreas Schwab <schwab@linux-m68k.org> |
322 | ||
323 | * z8kgen.c (struct op): Replace unused flavor with id. | |
324 | (opt): Remove extra xorb entry. | |
325 | (func): Use id field as fallback. | |
326 | (sub): Return new string, caller changed. | |
327 | (internal): Allocate end marker. Assign unique id before sorting. | |
328 | (gas): Likewise. Fix loop end condition. | |
329 | * z8k-opc.h: Regenerate. | |
330 | ||
bdc7fcfe AM |
331 | 2009-09-08 Alan Modra <amodra@bigpond.net.au> |
332 | ||
333 | * ppc-opc.c (powerpc_macros <extrdi>): Allow n+b of 64. | |
334 | ||
815c0482 AM |
335 | 2009-09-07 Alan Modra <amodra@bigpond.net.au> |
336 | ||
337 | * z8kgen.c (func): Fix thinko last patch. | |
338 | ||
eae14d64 AM |
339 | 2009-09-07 Alan Modra <amodra@bigpond.net.au> |
340 | ||
341 | * z8kgen.c (func): Stabilize qsort of identically named entries. | |
342 | * z8k-opc.h: Regenerate. | |
343 | ||
23f938f1 TG |
344 | 2009-09-07 Tristan Gingold <gingold@adacore.com> |
345 | ||
346 | * po/opcodes.pot: Regenerate. | |
347 | ||
2eee5593 AM |
348 | 2009-09-07 Alan Modra <amodra@bigpond.net.au> |
349 | ||
350 | * configure.in (BUILD_LIBS, BUILD_LIB_DEPS): Define and subst. | |
351 | * configure: Regenerate. | |
352 | * Makefile.am (LIBIBERTY, BUILD_LIBIBERTY, BUILD_LIBINTL): Delete. | |
353 | (BUILD_LIBS, BUILD_LIB_DEPS): Define. Use.. | |
354 | (i386-gen, ia64-gen, z8kgen): ..here. | |
355 | * Makefile.in: Regenerate. | |
356 | ||
ae794f60 TG |
357 | 2009-09-07 Tristan Gingold <gingold@adacore.com> |
358 | ||
359 | * z8k-opc.h: Regenerate. | |
360 | ||
96d56e9f NC |
361 | 2009-09-05 Martin Thuresson <martin@mtme.org> |
362 | ||
363 | * ia64-dis.c (print_insn_ia64): Update code to use renamed member. | |
364 | * m88k-dis.c (m88kdis): Rename variable class to in_class. | |
365 | * tic80-opc.c (tic80_symbol_to_value, tic80_value_to_symbol): | |
366 | Rename argument class to symbol_class. | |
367 | ||
66a6900a JZ |
368 | 2009-09-04 Jie Zhang <jie.zhang@analog.com> |
369 | ||
370 | * bfin-dis.c (decode_pseudodbg_assert_0): Change according | |
371 | to the new encoding of DBGA, DBGAH, and DBGAL. | |
372 | (_print_insn_bfin): Likewise. | |
373 | ||
ad15c38e JZ |
374 | 2009-09-03 Jie Zhang <jie.zhang@analog.com> |
375 | ||
376 | * bfin-dis.c (_print_insn_bfin): Don't declare. | |
377 | (print_insn_bfin): Don't declare. | |
378 | (dregs_pair): Remove. | |
379 | (ignore_bits): Remove. | |
380 | (ccstat): Remove. | |
381 | ||
c958a8a8 JZ |
382 | 2009-09-03 Jie Zhang <jie.zhang@analog.com> |
383 | ||
384 | * bfin-dis.c (IS_DREG): Define. | |
385 | (IS_PREG): Define. | |
386 | (IS_AREG): Define. | |
387 | (IS_GENREG): Define. | |
388 | (IS_DAGREG): Define. | |
389 | (IS_SYSREG): Define. | |
390 | (decode_REGMV_0): Check illegal register move instructions. | |
391 | ||
3df5879c DK |
392 | 2009-09-03 Dave Korn <dave.korn.cygwin@gmail.com> |
393 | ||
394 | * Makefile.am (BUILD_LIBINTL): New variable. | |
395 | (i386-gen$(EXEEXT_FOR_BUILD)): Use it. | |
396 | (ia64-gen$(EXEEXT_FOR_BUILD)): And here. | |
397 | (z8kgen$(EXEEXT_FOR_BUILD)): And here. | |
398 | * Makefile.in: Regenerate. | |
399 | ||
05316052 DD |
400 | 2009-09-01 DJ Delorie <dj@redhat.com> |
401 | ||
402 | * mep-asm.c: Regenerate. | |
403 | * mep-desc.c: Regenerate. | |
404 | * mep-opc.c: Regenerate. | |
405 | ||
e06ae0d4 TG |
406 | 2009-09-01 Tristan Gingold <gingold@adacore.com> |
407 | ||
408 | * makefile.vms: Ported to Itanium VMS. Remove useless targets and | |
409 | dependencies. Remove unused FORMAT variable. | |
410 | * configure.com: New file to create build.com DCL script for | |
411 | Itanium VMS or Alpha VMS. | |
412 | ||
d3ce72d0 NC |
413 | 2009-08-29 Martin Thuresson <martin@mtme.org> |
414 | ||
415 | * cris-dis.c (bytes_to_skip): Update code to use new name. | |
416 | * i386-dis.c (putop): Update code to use new name. | |
417 | * i386-gen.c (process_i386_opcodes): Update code to use | |
418 | new name. | |
419 | * i386-opc.h (struct template): Rename struct template to | |
420 | insn_template. Update code accordingly. | |
421 | * i386-tbl.h (i386_optab): Update type to use new name. | |
422 | * ia64-dis.c (print_insn_ia64): Rename variable template | |
423 | to template_val. | |
424 | * tic30-dis.c (struct instruction, get_tic30_instruction): | |
425 | Update code to use new name. | |
426 | * tic54x-dis.c (has_lkaddr, get_insn_size) | |
427 | (print_parallel_instruction, print_insn_tic54x, tic54x_get_insn): | |
428 | Update code to use new name. | |
429 | * tic54x-opc.c (tic54x_unknown_opcode, tic54x_optab): | |
430 | Update type to new name. | |
431 | * z8kgen.c (internal, gas): Rename variable new to new_op. | |
432 | ||
791f3971 L |
433 | 2009-08-28 H.J. Lu <hongjiu.lu@intel.com> |
434 | ||
435 | * Makefile.am (COMPILE_FOR_BUILD): Remove BUILD_CPPFLAGS. | |
436 | Replace BUILD_CFLAGS with CFLAGS_FOR_BUILD. | |
437 | (LINK_FOR_BUILD): Replace BUILD_CFLAGS/BUILD_LDFLAGS with | |
438 | CFLAGS_FOR_BUILD/LDFLAGS_FOR_BUILD. | |
439 | * Makefile.in: Regenerated. | |
440 | ||
573e8a1c RW |
441 | 2009-08-27 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
442 | ||
443 | * Makefile.am (bfdlibdir, bfdincludedir): Move definition ... | |
444 | [INSTALL_LIBBFD]: ... here, ... | |
445 | [INSTALL_LIBBFD]: ... and empty overrides here. | |
446 | [!INSTALL_LIBBFD]: (rpath_bfdlibdir): New variable. | |
447 | [!INSTALL_LIBBFD] (libbfd_la_LDFLAGS): Use it. | |
448 | * Makefile.in: Regenerate. | |
449 | * configure: Regenerate. | |
450 | ||
f7922329 NC |
451 | 2009-08-26 Philippe De Muyter <phdm@macqel.be> |
452 | ||
453 | * m68k-dis.c (print_insn_arg): Add movecr register names for | |
454 | coldfire v4e families. | |
455 | ||
ff13a42d RW |
456 | 2009-08-25 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
457 | ||
458 | * Makefile.am (SUBDIRS): Build '.' before 'po'. | |
459 | (COMPILE_FOR_BUILD, LINK_FOR_BUILD, BUILD_LIBIBERTY) | |
460 | (MOSTLYCLEANFILES, MAINTAINERCLEANFILES): New variables. | |
461 | (i386-gen$(EXEEXT_FOR_BUILD)): Renamed from i386-gen, rewrite | |
462 | using *BUILD variables, depend upon $(BUILD_LIBIBERTY). | |
463 | (i386-gen.o): New rule. | |
464 | ($(srcdir)/i386-init.h): Adjust. | |
465 | (i386-opc.lo): Depend on $(srcdir)/i386-tbl.h. | |
466 | (ia64-gen$(EXEEXT_FOR_BUILD)): Rename from ia64-gen, adjust likewise. | |
467 | (ia64-gen.o): New rule. | |
468 | (ia64_asmtab_deps): New variable. | |
469 | ($(srcdir)/ia64-asmtab.c): Use it; adjust likewise. | |
470 | (ia64-opc.lo): Depend on $(srcdir)/ia64-asmtab.c. | |
471 | (s390-mkopc$(EXEEXT_FOR_BUILD)): Rename from s390-mkopc, adjust | |
472 | likewise. | |
473 | (s390-opc.tab): Adjust. | |
474 | (z8kgen$(EXEEXT_FOR_BUILD), z8kgen.o, $(srcdir)/z8k-opc.h): New | |
475 | rules. | |
476 | (z8k-dis.lo): Depend on $(srcdir)/z8k-opc.h. | |
477 | * Makefile.in: Regenerate. | |
478 | * z8kgen.c (gas): Avoid '/*' in comment. | |
479 | * z8k-opc.h (func): Regenerate. | |
480 | ||
6f01793d RW |
481 | 2009-08-24 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
482 | ||
483 | * Makefile.am (TARGET_LIBOPCODES_CFILES): New variable, taken | |
484 | from $(CFILES), sorted, with dis-buf.c, dis-init.c, disassemble.c, | |
485 | i386-gen.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c, ia64-opc-i.c, | |
486 | ia64-opc-m.c, ia64-opc-d.c, ia64-gen.c, ia64-asmtab.c removed, and | |
487 | msp430-dis.c added. | |
488 | (LIBOPCODES_CFILES): New variable, adding to | |
489 | TARGET_LIBOPCODES_CFILES also non-target library sources. | |
490 | (CFILES): Factorize based on $(LIBOPCODES_CFILES), adding generator | |
491 | files. | |
492 | (ALL_MACHINES): Factorize based on $(TARGET_LIBOPCODES_CFILES). | |
493 | (EXTRA_libopcodes_la_SOURCES): Use $(LIBOPCODES_CFILES). | |
494 | * Makefile.in: Regenerate. | |
495 | * po/POTFILES.in: Regenerate. | |
496 | ||
81ecdfbb RW |
497 | 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
498 | ||
14ec8efd RW |
499 | * Makefile.am (libopcodes_la_LDFLAGS): Initialize early. |
500 | [INSTALL_LIBBFD] (bfdlib_LTLIBRARIES): Set only in this condition. | |
501 | [INSTALL_LIBBFD] (bfdinclude_DATA): New. | |
502 | [!INSTALL_LIBBFD] (noinst_LTLIBRARIES): New. | |
503 | [!INSTALL_LIBBFD] (libopcodes_la_LDFLAGS): Ensure libopcodes.la | |
504 | is built shared even if it is not to be installed. | |
505 | (install-bfdlibLTLIBRARIES,uninstall-bfdlibLTLIBRARIES) | |
506 | (install_libopcodes, uninstall_libopcodes): Remove. | |
507 | (AM_CPPFLAGS): Renamed from ... | |
508 | (INCLUDES): ... this. | |
509 | * Makefile.in: Regenerate. | |
510 | ||
758227f0 RW |
511 | * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9 and cygnus, add |
512 | 1.11, foreign, no-dist. | |
513 | (MKDEP, m32c_opc_h): Remove variables. | |
514 | (disassemble.lo): Rewrite using automake-style dependency | |
515 | tracking rules; only list the dependency upon the primary source | |
516 | file, but no included headers. | |
517 | (m32c-asm.lo, m32c-desc.lo, m32c-dis.lo, m32c-ibld.lo, m32c-opc.lo) | |
518 | (i386-gen.o, ia64-gen.o): Remove dependency statements. | |
519 | (EXTRA_libopcodes_la_SOURCES): New variable, list $(CFILES) to | |
520 | ensure all dependency fragments are included in the Makefile. | |
521 | (s390-opc.lo): Depend on s390-opc.tab. | |
522 | (DEP, DEP1, dep.sed, dep, dep-in, dep-am): Remove rules. | |
523 | (mkdep section): Remove. | |
524 | * Makefile.in: Regenerate. | |
525 | * po/POTFILES.in: Regenerate. | |
526 | ||
af542c2e RW |
527 | * Makefile.am (install-pdf, install-html): Remove. |
528 | * Makefile.in: Regenerate. | |
529 | ||
81ecdfbb RW |
530 | * Makefile.in: Regenerate. |
531 | * aclocal.m4: Likewise. | |
532 | * config.in: Likewise. | |
533 | * configure: Likewise. | |
534 | ||
7ba29e2a NC |
535 | 2009-08-06 Michael Eager <eager@eagercon.com> |
536 | ||
537 | * Makefile.am: Add microblaze-opc.h to HFILES, microblaze-dis.c to | |
538 | CFILES, microblaze-dis.lo to ALL_MACHINES, targets. | |
539 | * Makefile.in: Regenerate. | |
540 | * configure.in: Add bfd_microblaze_arch target. | |
541 | * configure: Regenerate. | |
e0c483d6 | 542 | * disassemble.c: Define ARCH_microblaze, return |
7ba29e2a NC |
543 | print_insn_microblaze(). |
544 | * microblaze-dis.c: New MicroBlaze disassembler. | |
545 | * microblaze-opc.h: New MicroBlaze opcode definitions. | |
546 | * microblaze-opcm.h: New MicroBlaze opcode types. | |
547 | ||
8a9036a4 L |
548 | 2009-07-25 H.J. Lu <hongjiu.lu@intel.com> |
549 | ||
550 | * configure.in: Handle bfd_l1om_arch. | |
551 | * disassemble.c (disassembler): Likewise. | |
552 | ||
553 | * configure: Regenerated. | |
554 | ||
555 | * i386-dis.c (print_insn): Handle bfd_mach_l1om and | |
556 | bfd_mach_l1om_intel_syntax. Use 8 bytes per line for Intel L1OM. | |
557 | ||
558 | * i386-gen.c (cpu_flag_init): Set CPU_UNKNOWN_FLAGS to ~CpuL1OM. | |
559 | Add CPU_L1OM_FLAGS. | |
560 | (cpu_flags): Add CpuL1OM. | |
561 | (set_bitfield): Take an argument to set the value field. | |
562 | (process_i386_cpu_flag): Support ~CpuXXX and ~(CpuXXX|CpuYYY). | |
563 | (process_i386_opcode_modifier): Updated. | |
564 | (process_i386_operand_type): Likewise. | |
565 | * i386-init.h: Regenerated. | |
566 | * i386-tbl.h: Likewise. | |
567 | ||
568 | * i386-opc.h (CpuL1OM): New. | |
569 | (CpuXsave): Updated. | |
570 | (i386_cpu_flags): Add cpul1om. | |
571 | ||
309d3373 JB |
572 | 2009-07-24 Jan Beulich <jbeulich@novell.com> |
573 | ||
574 | * i386-dis.c (fgrps): Correct annotation for feni/fdisi. Add | |
575 | frstpm. | |
576 | * i386-gen.c (cpu_flag_init): Add FP enabling flags where needed. | |
577 | (cpu_flags): Add Cpu8087, Cpu287, Cpu387, Cpu687, and CpuFISTTP. | |
578 | (set_bitfield): Expand CpuFP to Cpu8087|Cpu287|Cpu387. | |
579 | * i386-opc.h (Cpu8087, Cpu287, Cpu387, Cpu687, CpuFISTTP): | |
580 | Define. | |
581 | (union i386_cpu_flags): Add cpu8087, cpu287, cpu387, cpu687, | |
582 | and cpufisttp. | |
583 | * i386-opc.tbl: Qualify floating point instructions by their | |
584 | respective CpuXXX flag. Fix fucom{,p,pp}, fprem1, fsin, fcos, | |
585 | and fsincos to be avilable only on 387. Fix fstsw ax to be | |
586 | available only on 287+. Add f{,n}eni, f{,n}disi, f{,n}setpm, | |
587 | and frstpm. | |
588 | * i386-init.h, i386-tbl.h: Regenerate. | |
589 | ||
7769efb2 NC |
590 | 2009-07-20 Nick Clifton <nickc@redhat.com> |
591 | ||
592 | PR 10288 | |
593 | * arm-dis.c (arm_opcodes): Catch non-zero bits 8-11 in register | |
594 | offset or indexed based addressing mode 3. | |
595 | ||
74bdfecf NC |
596 | 2009-07-14 Nick Clifton <nickc@redhat.com> |
597 | ||
598 | PR 10288 | |
599 | * arm-dis.c (arm_opcodes): Catch illegal Addressing Mode 1 | |
600 | patterns. | |
601 | (arm_decode_shift): Catch illegal register based shifts. | |
602 | (print_insn_arm): Properly handle negative register r0 | |
603 | post-indexed addressing. | |
604 | ||
d1aaab3c DK |
605 | 2009-07-10 Doug Kwan <dougkwan@google.com> |
606 | ||
607 | * arm-disc.c (print_insn_coprocessor, print_insn_arm): Print only | |
608 | lower 32 bits of long types to make hexadecimal output consistent | |
609 | on both 32-bit and 64-bit hosts. | |
610 | ||
87337981 AM |
611 | 2009-07-10 Alan Modra <amodra@bigpond.net.au> |
612 | ||
613 | * fr30-desc.c, * fr30-desc.h, * fr30-opc.c, * fr30-opc.h, | |
614 | * frv-desc.c, * frv-desc.h, * frv-opc.c, * frv-opc.h, | |
615 | * ip2k-desc.c, * ip2k-desc.h, * ip2k-opc.c, * ip2k-opc.h, | |
616 | * iq2000-desc.c, * iq2000-desc.h, * iq2000-opc.c, * iq2000-opc.h, | |
617 | * lm32-desc.c, * lm32-desc.h, * lm32-opc.c, * lm32-opc.h, | |
618 | * lm32-opinst.c, * m32c-desc.c, * m32c-desc.h, * m32c-opc.c, | |
619 | * m32c-opc.h, * m32r-desc.c, * m32r-desc.h, * m32r-opc.c, | |
620 | * m32r-opc.h, * m32r-opinst.c, * mt-desc.c, * mt-desc.h, | |
621 | * mt-opc.c, * mt-opc.h, * openrisc-desc.c, * openrisc-desc.h, | |
622 | * openrisc-opc.c, * openrisc-opc.h, * xc16x-desc.c, * xc16x-desc.h, | |
e0c483d6 | 623 | * xc16x-opc.c, * xc16x-opc.h, * xstormy16-desc.c, * xstormy16-desc.h, |
87337981 AM |
624 | * xstormy16-opc.c, * xstormy16-opc.h: Regenerate. |
625 | ||
1103f72c NC |
626 | 2009-07-07 Chung-Lin Tang <cltang@pllab.cs.nthu.edu.tw> |
627 | ||
628 | * arm-dis.c (coprocessor_opcodes): Fix mask for waddbhus. | |
629 | ||
78c66db8 NC |
630 | 2009-07-07 Nick Clifton <nickc@redhat.com> |
631 | ||
632 | PR 10288 | |
633 | * arm-dis.c (arm_opcodes): Be more strict about decoding scaled | |
634 | addressing modes. | |
635 | ||
22102fb0 DD |
636 | 2009-07-06 DJ Delorie <dj@redhat.com> |
637 | ||
638 | * mep-desc.c: Regenerate. | |
639 | * mep-desc.h: Regenerate. | |
640 | * mep-opc.c: Regenerate. | |
641 | * mep-opc.h: Regenerate. | |
642 | ||
922d8de8 DR |
643 | 2009-07-06 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com> |
644 | ||
645 | * i386-opc.h (CpuFMA4): Add CpuFMA4. | |
646 | (i386_cpu_flags): New. | |
647 | * i386-gen.c: Add CPU_FMA4_FLAGS. | |
648 | * i386-opc.tbl: Add FMA4 instructions. | |
649 | * i386-tbl.h: Regenerate. | |
650 | * i386-init.h: Regenerate. | |
651 | * i386-dis.c (OP_VEX_FMA): New. Handle FMA4. | |
652 | (OP_XMM_VexW): Ditto. | |
653 | (OP_EX_VexW): Ditto. | |
654 | (VEXI4_Fixup): Ditto. | |
655 | (VexI4, VexFMA, Vex128FMA, EXVexW, EXdVexW, XMVexW): New Macros. | |
656 | (PREFIX_VEX_3A5C, PREFIX_VEX_3A5D, PREFIX_VEX_3A5E): New. | |
657 | (PREFIX_VEX_3A5F, PREFIX_VEX_3A60): New. | |
658 | (PREFIX_VEX_3A68, PREFIX_VEX_3A69, PREFIX_VEX_3A6A): New. | |
659 | (PREFIX_VEX_3A6B, PREFIX_VEX_3A6C, PREFIX_VEX_3A6D): New. | |
660 | (PREFIX_VEX_3A6E, PREFIX_VEX_3A6F, PREFIX_VEX_3A7A): New. | |
661 | (PREFIX_VEX_3A7B, PREFIX_VEX_3A7C, PREFIX_VEX_3A7D): New. | |
662 | (PREFIX_VEX_3A7E, PREFIX_VEX_3A7F): New. | |
663 | (VEX_LEN_3A6A_P_2,VEX_LEN_3A6B_P_2, VEX_LEN_3A6E_P_2): New. | |
664 | (VEX_LEN_3A6F_P_2,VEX_LEN_3A7A_P_2, VEX_LEN_3A7B_P_2): New. | |
665 | (VEX_LEN_3A7E_P_2,VEX_LEN_3A7F_P_2): New. | |
666 | (get_vex_imm8): New. handle FMA4. | |
667 | (OP_EX_VexReg): Ditto. | |
e0c483d6 | 668 | |
fe56b6ce NC |
669 | 2009-06-30 Nick Clifton <nickc@redhat.com> |
670 | ||
671 | PR 10288 | |
672 | * arm-dis.c (coprocessor): Print the LDC and STC versions of the | |
673 | LFM and SFM instructions as comments,. | |
674 | Improve consistency of formatting for instructions displayed as | |
675 | comments and decimal values displayed with their hexadecimal | |
676 | equivalents. | |
677 | Formatting tidy ups. | |
678 | ||
05413229 NC |
679 | 2009-06-29 Nick Clifton <nickc@redhat.com> |
680 | ||
681 | PR 10288 | |
682 | * arm-dis.c (enum opcode_sentinels): New: Used to mark the | |
683 | boundary between variaant and generic coprocessor instuctions. | |
684 | (coprocessor): Use it. | |
685 | Fix architecture version of MCRR and MRRC instructions. | |
686 | (arm_opcdes): Fix patterns for STRB and STRH instructions. | |
687 | (print_insn_coprocessor): Check architecture and extension masks. | |
688 | Print a hexadecimal version of any decimal constant that is | |
689 | outside of the range of -16 to +32. | |
690 | (print_arm_address): Add a return value of the offset used in the | |
691 | adress, if it is worth printing a hexadecimal version of it. | |
692 | (print_insn_neon): Print a hexadecimal version of any decimal | |
693 | constant that is outside of the range of -16 to +32. | |
694 | (print_insn_arm): Likewise. | |
695 | (print_insn_thumb16): Likewise. | |
696 | (print_insn_thumb32): Likewise. | |
e0c483d6 | 697 | |
05413229 NC |
698 | PR 10297 |
699 | * arm-dis.c (UNDEFINED_INSTRUCTION): New macro for a description | |
700 | of an undefined instruction. | |
701 | (arm_opcodes): Use it. | |
702 | (thumb_opcod): Use it. | |
703 | (thumb32_opc): Use it. | |
704 | ||
378a0c07 DD |
705 | 2009-06-23 DJ Delorie <dj@redhat.com> |
706 | ||
dab97f24 DD |
707 | * mep-desc.c: Regenerate. |
708 | * mep-desc.h: Regenerate. | |
709 | * mep-dis.c: Regenerate. | |
710 | * mep-ibld.c: Regenerate. | |
711 | * mep-opc.c: Regenerate. | |
712 | ||
378a0c07 DD |
713 | * mep-asm.c: Regenerate. |
714 | * mep-opc.c: Regenerate. | |
715 | * mep-opc.h: Regenerate. | |
716 | ||
aece7d2e NC |
717 | 2009-06-22 Nick Clifton <nickc@redhat.com> |
718 | ||
719 | * po/fi.po: Updated Finish translation. | |
720 | ||
1998a8e0 AM |
721 | 2009-06-22 Alan Modra <amodra@bigpond.net.au> |
722 | ||
723 | * m32c-asm.c: Regenerate. | |
724 | ||
b33bafa0 AM |
725 | 2009-06-22 Alan Modra <amodra@bigpond.net.au> |
726 | ||
727 | * score-dis.c (print_insn_score48, print_insn_score32): Move default | |
728 | case label to proper lexical block. | |
729 | * score7-dis.c (print_insn_score32): Likewise. | |
730 | ||
ce21feb4 MS |
731 | 2009-06-19 Martin Schwidefsky <sschwidefsky@de.ibm.com> |
732 | ||
733 | * s390-opc.c (INSTR_RR_0R_OPT, INSTR_RX_0RRD_OPT, MASK_RR_0R_OPT, | |
734 | MASK_RX_0RRD_OPT): New instruction formats with optional arguments. | |
735 | * s390-opc.txt (nopr, nop): Use new instruction format. | |
736 | ||
0313a2b8 NC |
737 | 2009-06-18 Nick Clifton <nickc@redhat.com> |
738 | ||
739 | PR 10288 | |
740 | * arm-dis.c (print_insn_coprocessor): Check that a user specified | |
741 | ARM architecture supports the matched instruction. | |
742 | (print_insn_arm): Likewise. | |
743 | (select_arm_features): New function. Fills in the fields of an | |
744 | arm_feature_set structure based on a given arm machine number. | |
745 | (print_insn): Initialise an arm_feature_set structure. | |
746 | ||
6db7e006 MR |
747 | 2009-06-16 Maciej W. Rozycki <macro@linux-mips.org> |
748 | ||
749 | * vax-dis.c (is_function_entry): Return success for synthetic | |
750 | symbols too. | |
751 | (is_plt_tail): New function. | |
752 | (print_insn_vax): Decode PLT entry offset longword. | |
753 | ||
522fe561 NC |
754 | 2009-06-15 Nick Clifton <nickc@redhat.com> |
755 | ||
fe2ceba1 NC |
756 | PR 10186 |
757 | * arm-dis.c (thumb32_opcodes): Fix binary value of SEV.W | |
758 | instruction. | |
759 | ||
522fe561 NC |
760 | PR 10173 |
761 | * cr16-dis.c (print_arg): Avoid printing the 0x prefix twice. | |
762 | ||
1316c8b3 NC |
763 | 2009-06-15 Nick Clifton <nickc@redhat.com> |
764 | ||
765 | PR 10263 | |
766 | * arm-dis.c (print_insn): Ignore is_data if the user has requested | |
767 | the disassembly of data as well as instructions. | |
768 | ||
f6475b48 DE |
769 | 2009-06-11 Doug Evans <dje@sebabeach.org> |
770 | ||
771 | * cgen.sh: Handle multiple simultaneous runs for parallel makes. | |
772 | ||
f865a31d AG |
773 | 2009-06-11 Anthony Green <green@moxielogic.com> |
774 | ||
775 | * moxie-opc.c (moxie_form1_opc_info): Remove branch instructions. | |
776 | (moxie_form3_opc_info): Add branch instructions. | |
777 | * moxie-dis.c (print_insn_moxie): Disassemble MOXIE_F3_PCREL | |
778 | encoded instructions. | |
779 | ||
0e7c7f11 AG |
780 | 2009-06-06 Anthony Green <green@moxielogic.com> |
781 | ||
782 | * moxie-opc.c: Recode some MOXIE_F1_4 opcodes as MOXIE_F1_M. | |
783 | * moxie-dis.c (print_insn_moxie): Handle MOXIE_F1_M case. | |
784 | ||
67a648f1 AM |
785 | 2009-06-04 Alan Modra <amodra@bigpond.net.au> |
786 | ||
787 | * dep-in.sed: Don't use \n in replacement part of s command. | |
788 | * Makefile.am (DEP1): LC_ALL for uniq. | |
789 | * Makefile.in: Regenerate. | |
790 | ||
06c582ac NC |
791 | 2009-06-02 Nick Clifton <nickc@redhat.com> |
792 | ||
793 | * po/nl.po: Updated Dutch translation. | |
794 | ||
3164099e TG |
795 | 2009-06-02 Tristan Gingold <gingold@adacore.com> |
796 | ||
797 | * ia64-gen.c (parse_resource_users, print_dependency_table, | |
798 | add_dis_table_ent, finish_distable, insert_bit_table_ent, | |
799 | add_dis_entry, compact_distree, gen_dis_table, completer_entries_eq, | |
800 | get_prefix_len, compute_completer_bits, insert_opcode_dependencies, | |
801 | insert_completer_entry, print_completer_entry, print_completer_table, | |
802 | opcodes_eq, add_opcode_entry, shrink): Use ISO C syntax for functions. | |
803 | ||
d285268e DD |
804 | 2009-05-28 DJ Delorie <dj@redhat.com> |
805 | ||
806 | * mep-asm.c: Regenerate. | |
807 | * mep-desc.c: Regenerate. | |
808 | ||
2f3565a3 DD |
809 | 2009-05-26 DJ Delorie <dj@redhat.com> |
810 | ||
811 | * mep-asm.c: Regenerate. | |
812 | * mep-desc.c: Regenerate. | |
813 | * mep-desc.h: Regenerate. | |
814 | * mep-dis.c: Regenerate. | |
815 | * mep-ibld.c: Regenerate. | |
816 | * mep-opc.c: Regenerate. | |
817 | * mep-opc.h: Regenerate. | |
818 | ||
f12e7348 NC |
819 | 2009-05-26 Nick Clifton <nickc@redhat.com> |
820 | ||
821 | * po/id.po: Updated Indonesian translation. | |
822 | * po/opcodes.pot: Updated template file. | |
823 | ||
9e097a72 AM |
824 | 2009-05-26 Alan Modra <amodra@bigpond.net.au> |
825 | ||
826 | * dep-in.sed: Don't modify .o to .lo here. Output one filename | |
827 | per line with all lines having continuation backslash. Prefix | |
828 | first line with "A", following lines with "B". | |
829 | * Makefile.am (DEP): Don't use dep.sed here. | |
830 | (DEP1): Run $MKDEP on single files, modify .o to .lo here. Use | |
831 | dep.sed here on dependencies, sort and uniq. | |
832 | * Makefile.in: Regenerate. | |
833 | ||
4f8318f8 TG |
834 | 2009-05-25 Tristan Gingold <gingold@adacore.com> |
835 | ||
836 | * makefile.vms (OPT): New variable. | |
837 | (CFLAGS): Update compilation flags. | |
838 | ||
1d74713b DD |
839 | 2009-05-22 DJ Delorie <dj@redhat.com> |
840 | ||
841 | * mep-asm.c: Regenerate. | |
842 | * mep-desc.c: Regenerate. | |
843 | * mep-desc.h: Regenerate. | |
844 | * mep-dis.c: Regenerate. | |
845 | * mep-ibld.c: Regenerate. | |
846 | * mep-opc.c: Regenerate. | |
847 | * mep-opc.h: Regenerate. | |
848 | ||
c1e679ec DR |
849 | 2009-05-22 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com> |
850 | ||
851 | * i386-opc.h (Cpusse5): Delete. | |
852 | (i386_cpu_flags): Delete. | |
853 | * i386-gen.c: Remove CpuSSE5, Drex, Drexv and Drexc. | |
854 | * i386-opc.tbl: Remove SSE5 instructions. | |
855 | * i386-tbl.h: Regenerate. | |
856 | * i386-init.h: Regenerate. | |
857 | * i386-dis.c (OP_E_memeory, OP_E_extended): Remove drex handling. | |
858 | (print_drex_arg): Delete. | |
859 | (OP_DREX4): Delete. | |
860 | (OP_DREX3): Delete. | |
861 | (OP_DREX_ICMP): Delete. | |
862 | (OP_DREX_FCMP): Delete. | |
863 | (DREX_*): Delete. | |
864 | (THREE_BYTE_0F24, THREE_BYTE_0F25, THREE_BYTE_0f7B): Delete. | |
e0c483d6 | 865 | |
2b3decb5 AM |
866 | 2009-05-22 Alan Modra <amodra@bigpond.net.au> |
867 | ||
868 | * Makefile.am: Run "make dep-am". | |
869 | * Makefile.in: Regenerate. | |
870 | * po/POTFILES.in: Regenerate. | |
871 | ||
eb956800 DD |
872 | 2009-05-19 DJ Delorie <dj@redhat.com> |
873 | ||
874 | * mep-asm.c: Regenerate. | |
875 | * mep-opc.c: Regenerate. | |
876 | ||
3526b680 DD |
877 | 2009-04-30 DJ Delorie <dj@redhat.com> |
878 | ||
879 | * mep-asm.c: Regenerate. | |
880 | * mep-desc.c: Regenerate. | |
881 | * mep-desc.h: Regenerate. | |
882 | * mep-dis.c: Regenerate. | |
883 | * mep-ibld.c: Regenerate. | |
884 | * mep-opc.c: Regenerate. | |
885 | * mep-opc.h: Regenerate. | |
886 | ||
45be3704 DD |
887 | 2009-04-17 DJ Delorie <dj@redhat.com |
888 | ||
889 | * mep-desc.c: Regenerate. | |
890 | * mep-ibld.c: Regenerate. | |
891 | * mep-opc.c: Regenerate. | |
892 | * mep-opc.h: Regenerate. | |
893 | ||
20135e4c NC |
894 | 2009-04-15 Anthony Green <green@moxielogic.com> |
895 | ||
896 | * moxie-opc.c, moxie-dis.c: Created. | |
897 | * Makefile.am: Build the moxie source files. | |
898 | * configure.in: Add moxie support. | |
899 | * Makefile.in, configure: Rebuilt. | |
900 | * disassemble.c (disassembler): Add moxie support. | |
901 | (ARCH_moxie): Define. | |
902 | ||
ac5c19e6 JB |
903 | 2009-04-15 Jan Beulich <jbeulich@novell.com> |
904 | ||
905 | * i386-opc.tbl (protb, protw, protd, protq): Set opcode | |
906 | extension to None. | |
907 | (pshab, pshaw, pshad, pshaq): Likewise. | |
908 | * i386-tbl.h: Re-generate. | |
909 | ||
52de720d DD |
910 | 2009-04-08 DJ Delorie <dj@redhat.com |
911 | ||
912 | * mep-asm.c: Regenerate. | |
913 | * mep-desc.c: Regenerate. | |
914 | * mep-desc.h: Regenerate. | |
915 | * mep-dis.c: Regenerate. | |
916 | * mep-ibld.c: Regenerate. | |
917 | * mep-opc.c: Regenerate. | |
918 | * mep-opc.h: Regenerate. | |
919 | ||
858d7a6d PB |
920 | 2009-04-07 Peter Bergner <bergner@vnet.ibm.com> |
921 | ||
922 | * ppc-opc.c (powerpc_opcodes) <"tlbilxlpid", "tlbilxpid", "tlbilxva", | |
923 | "tlbilx">: Use secondary opcode "18" as per the ISA 2.06 documentation. | |
924 | Reorder entries so the extended mnemonics are listed before tlbilx. | |
925 | ||
70dc4e32 PB |
926 | 2009-04-02 Peter Bergner <bergner@vnet.ibm.com> |
927 | ||
928 | * ppc-dis.c (powerpc_init_dialect): Do not choose a default dialect | |
929 | due to -many/-Many. | |
930 | (print_insn_powerpc): Make sure we only deprecate instructions using | |
931 | the original dialect and not a modified dialect due to -Many handling. | |
932 | Move the handling of the condition register and default operands to | |
933 | the end of the if/else if/else chain. | |
934 | * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that | |
935 | instructions from newer processors are listed before older ones. | |
936 | <"icblce", "sync", "eieio", "tlbld">: Deprecate for processors | |
937 | that have instructions with conflicting opcodes. | |
938 | ||
e401b04c PB |
939 | 2009-04-01 Peter Bergner <bergner@vnet.ibm.com> |
940 | ||
941 | * ppc-opc.c (powerpc_opcodes) <"dcbzl">: Merge the POWER4 and | |
942 | E500MC entries. | |
943 | ||
b8f9ee44 CL |
944 | 2009-04-01 Christophe Lyon <christophe.lyon@st.com> |
945 | ||
946 | * arm-dis.c (print_insn): Print BE8 opcodes in little endianness. | |
947 | ||
d460e92e JM |
948 | 2009-03-30 Joseph Myers <joseph@codesourcery.com> |
949 | ||
950 | * arm-dis.c (print_insn): Also check section matches in backwards | |
951 | search for mapping symbol. | |
952 | ||
d34b5006 L |
953 | 2009-03-26 H.J. Lu <hongjiu.lu@intel.com> |
954 | ||
955 | * i386-dis.c (get_valid_dis386): Abort on unhandled table. | |
956 | ||
8d25cc3d AM |
957 | 2009-03-18 Alan Modra <amodra@bigpond.net.au> |
958 | ||
3889c459 | 959 | * cgen-opc.c: Include alloca-conf.h rather than alloca.h. |
8d25cc3d AM |
960 | * Makefile.am: Run "make dep-am". |
961 | * Makefile.in: Regenerate. | |
962 | * openrisc-opc.c: Regenerate. | |
963 | ||
34dd024a NC |
964 | 2009-03-10 Nick Clifton <nickc@redhat.com> |
965 | ||
966 | * po/id.po: Updated Indonesian translation. | |
967 | ||
69fe9ce5 AM |
968 | 2009-03-10 Alan Modra <amodra@bigpond.net.au> |
969 | ||
970 | * ppc-dis.c: Include "opintl.h". | |
971 | (struct ppc_mopt, ppc_opts): New. | |
972 | (ppc_parse_cpu): New function. | |
973 | (powerpc_init_dialect): Use it. | |
974 | (print_ppc_disassembler_options): Dump options from ppc_opts. | |
975 | Internationalize message. | |
976 | ||
d11fd249 NC |
977 | 2009-03-06 Nick Clifton <nickc@redhat.com> |
978 | ||
979 | * po/es.po: Updated Spanish translation. | |
980 | ||
51dec227 AM |
981 | 2009-03-04 Alan Modra <amodra@bigpond.net.au> |
982 | ||
983 | PR 6768 | |
984 | * configure.in: Test for ld --as-needed support. Link shared | |
985 | libopcodes against libm. | |
986 | * configure: Regenerate. | |
987 | ||
c72ab5f2 PB |
988 | 2009-03-03 Peter Bergner <bergner@vnet.ibm.com> |
989 | ||
990 | * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that | |
991 | instructions from newer processors are listed before older ones. | |
992 | ||
a1f7ca36 AM |
993 | 2009-03-03 Alan Modra <amodra@bigpond.net.au> |
994 | ||
995 | * Makefile.am: Run "make dep-am". | |
996 | (HFILES): Move lm32-desc.h and lm32-opc.h from.. | |
997 | (CFILES): ..here. | |
998 | * Makefile.in: Regenerate. | |
999 | ||
c3b7224a NC |
1000 | 2009-03-02 Qinwei <qinwei@sunnorth.com.cn> |
1001 | ||
1002 | * score7-dis.c: New file. | |
1003 | * Makefile.am: Add dependencies for score7-dis.c. | |
1004 | * Makefile.in: Regenerate. | |
1005 | * configure.in: Add score7-dis to score files. | |
1006 | * configure: Regenerate. | |
1007 | * score-dis.c: Add support for score7 architecture. | |
1008 | * score-opc.h: Likewise. | |
1009 | ||
58e24671 RW |
1010 | 2009-03-01 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
1011 | ||
1012 | * configure: Regenerate. | |
1013 | ||
d6f574e0 L |
1014 | 2009-02-27 H.J. Lu <hongjiu.lu@intel.com> |
1015 | ||
1016 | * i386-dis.c (OP_EX): Call OP_E_memory instead of OP_E. | |
1017 | ||
066be9f7 PB |
1018 | 2009-02-26 Peter Bergner <bergner@vnet.ibm.com> |
1019 | ||
1020 | * ppc-dis.c (powerpc_init_dialect): Extend -Mpower7 to disassemble | |
1021 | the power7 and the isel instructions. | |
1022 | * ppc-opc.c (insert_xc6, extract_xc6): New static functions. | |
1023 | (insert_dm, extract_dm): Likewise. | |
1024 | (XB6): Update comment to include XX2 form. | |
1025 | (WC, XC6, SHW, DMEX, UIM, XX2, XX3RC, XX4, XX2_MASK, XX2UIM_MASK, | |
1026 | XX2BF_MASK, XX3BF_MASK, XX3SHW_MASK, XX4_MASK, XWC_MASK, POWER7): New. | |
1027 | (RemoveXX3DM): Delete. | |
1028 | (powerpc_opcodes): <"lfdp", "lfdpx", "mcrxr", "mftb", "mffgpr", | |
1029 | "mftgpr">: Deprecate for POWER7. | |
1030 | <"fres", "fres.", "frsqrtes", "frsqrtes.", "fre", "fre.", "frsqrte", | |
1031 | "frsqrte.">: Deprecate the three operand form and enable the two | |
1032 | operand form for POWER7 and later. | |
1033 | <"wait">: Extend to accept optional parameter. Enable for POWER7. | |
1034 | <"waitsrv", "waitimpl">: Add extended opcodes. | |
1035 | <"ldbrx", "stdbrx">: Enable for POWER7. | |
1036 | <"cdtbcd", "cbcdtd", "addg6s">: Add POWER6 opcodes. | |
1037 | <"bpermd", "dcbtstt", "dcbtt", "dcffix.", "dcffix", "divde.", "divde", | |
1038 | "divdeo.", "divdeo", "divdeu.", "divdeu", "divdeuo.", "divdeuo", | |
1039 | "divwe.", "divwe", "divweo.", "divweo", "divweu.", "divweu", "divweuo.", | |
1040 | "divweuo", "fcfids.", "fcfids", "fcfidu.", "fcfidu", "fcfidus.", | |
1041 | "fcfidus", "fctidu.", "fctidu", "fctiduz.", "fctiduz", "fctiwu.", | |
1042 | "fctiwu", "fctiwuz.", "fctiwuz", "ftdiv", "ftsqrt", "lbarx", "lfiwzx", | |
1043 | "lharx", "popcntd", "popcntw", "stbcx.", "sthcx.">: Add POWER7 opcodes. | |
1044 | <"lxsdux", "lxsdx", "lxvdsx", "lxvw4ux", "lxvw4x", "stxsdux", "stxsdx", | |
1045 | "stxvw4ux", "stxvw4x", "xsabsdp", "xsadddp", "xscmpodp", "xscmpudp", | |
1046 | "xscpsgndp", "xscvdpsp", "xscvdpsxds", "xscvdpsxws", "xscvdpuxds", | |
1047 | "xscvdpuxws", "xscvspdp", "xscvsxddp", "xscvuxddp", "xsdivdp", | |
1048 | "xsmaddadp", "xsmaddmdp", "xsmaxdp", "xsmindp", "xsmsubadp", | |
1049 | "xsmsubmdp", "xsmuldp", "xsnabsdp", "xsnegdp", "xsnmaddadp", | |
1050 | "xsnmaddmdp", "xsnmsubadp", "xsnmsubmdp", "xsrdpi", "xsrdpic", | |
1051 | "xsrdpim", "xsrdpip", "xsrdpiz", "xsredp", "xsrsqrtedp", "xssqrtdp", | |
1052 | "xssubdp", "xstdivdp", "xstsqrtdp", "xvabsdp", "xvabssp", "xvadddp", | |
1053 | "xvaddsp", "xvcmpeqdp.", "xvcmpeqdp", "xvcmpeqsp.", "xvcmpeqsp", | |
1054 | "xvcmpgedp.", "xvcmpgedp", "xvcmpgesp.", "xvcmpgesp", "xvcmpgtdp.", | |
1055 | "xvcmpgtdp", "xvcmpgtsp.", "xvcmpgtsp", "xvcpsgnsp", "xvcvdpsp", | |
1056 | "xvcvdpsxds", "xvcvdpsxws", "xvcvdpuxds", "xvcvdpuxws", "xvcvspdp", | |
1057 | "xvcvspsxds", "xvcvspsxws", "xvcvspuxds", "xvcvspuxws", "xvcvsxddp", | |
1058 | "xvcvsxdsp", "xvcvsxwdp", "xvcvsxwsp", "xvcvuxddp", "xvcvuxdsp", | |
1059 | "xvcvuxwdp", "xvcvuxwsp", "xvdivdp", "xvdivsp", "xvmaddadp", | |
1060 | "xvmaddasp", "xvmaddmdp", "xvmaddmsp", "xvmaxdp", "xvmaxsp", | |
1061 | "xvmindp", "xvminsp", "xvmovsp", "xvmsubadp", "xvmsubasp", "xvmsubmdp", | |
1062 | "xvmsubmsp", "xvmuldp", "xvmulsp", "xvnabsdp", "xvnabssp", "xvnegdp", | |
1063 | "xvnegsp", "xvnmaddadp", "xvnmaddasp", "xvnmaddmdp", "xvnmaddmsp", | |
1064 | "xvnmsubadp", "xvnmsubasp", "xvnmsubmdp", "xvnmsubmsp", "xvrdpi", | |
1065 | "xvrdpic", "xvrdpim", "xvrdpip", "xvrdpiz", "xvredp", "xvresp", | |
1066 | "xvrspi", "xvrspic", "xvrspim", "xvrspip", "xvrspiz", "xvrsqrtedp", | |
1067 | "xvrsqrtesp", "xvsqrtdp", "xvsqrtsp", "xvsubdp", "xvsubsp", "xvtdivdp", | |
1068 | "xvtdivsp", "xvtsqrtdp", "xvtsqrtsp", "xxland", "xxlandc", "xxlnor", | |
1069 | "xxlor", "xxlxor", "xxmrghw", "xxmrglw", "xxsel", "xxsldwi", "xxspltd", | |
1070 | "xxspltw", "xxswapd">: Add VSX opcodes. | |
1071 | ||
4c664d7b L |
1072 | 2009-02-23 H.J. Lu <hongjiu.lu@intel.com> |
1073 | ||
1074 | * i386-gen.c (operand_type_init): Remove OPERAND_TYPE_VEX_IMM4. | |
1075 | (operand_types): Remove Vex_Imm4. | |
1076 | ||
1077 | * i386-opc.h (Vex_Imm4): Removed. | |
1078 | (OTMax): Updated. | |
1079 | (i386_operand_type): Remove vex_imm4. | |
1080 | ||
1081 | * i386-opc.tbl: Remove Vex_Imm4 comments. | |
1082 | * i386-init.h: Regenerated. | |
1083 | * i386-tbl.h: Likewise. | |
1084 | ||
4ce8808b RE |
1085 | 2009-02-23 Richard Earnshaw <rearnsha@arm.com> |
1086 | ||
1087 | * arm-dis.c (neon_opcodes): Correct bit-mask and patterns for | |
1088 | vq{r}shr{u}n.s64 insnstructions. | |
1089 | ||
0e55be16 PB |
1090 | 2009-02-19 Peter Bergner <bergner@vnet.ibm.com> |
1091 | ||
1092 | * ppc-opc.c (powerpc_opcodes) <"lfdepx", "stfdepx">: Fix the first | |
1093 | operand to be a float point register (FRT/FRS). | |
1094 | ||
b1c9882d AN |
1095 | 2009-02-18 Adam Nemet <anemet@caviumnetworks.com> |
1096 | ||
1097 | * mips-opc.c (mips_builtin_opcodes): Move the Octeon-specific | |
1098 | dmfc2 and dmtc2 before the architecture-level variants. | |
1099 | ||
137f2437 NC |
1100 | 2009-02-18 Pierre Muller <muller@ics.u-strasbg.fr> |
1101 | ||
1102 | * fr30-opc.c: Regenerate. | |
1103 | * frv-opc.c: Regenerate. | |
1104 | * ip2k-opc.c: Regenerate. | |
1105 | * iq2000-opc.c: Regenerate. | |
1106 | * lm32-opc.c: Regenerate. | |
1107 | * m32c-opc.c: Regenerate. | |
1108 | * m32r-opc.c: Regenerate. | |
1109 | * mep-opc.c: Regenerate. | |
1110 | * mt-opc.c: Regenerate. | |
1111 | * xc16x-opc.c: Regenerate. | |
1112 | * xstormy16-opc.c: Regenerate. | |
1113 | * tic54x-dis.c (print_instruction): Avoid compiler warning on | |
1114 | sprintf call. | |
1115 | ||
87298967 NS |
1116 | 2009-02-12 Nathan Sidwell <nathan@codesourcery.com> |
1117 | ||
1118 | * m68k-opc.c (m68k_opcodes): Add stldsr instruction. | |
1119 | ||
80890a61 PB |
1120 | 2009-02-05 Peter Bergner <bergner@vnet.ibm.com> |
1121 | ||
1122 | * ppc-opc.c: Update copyright year. | |
1123 | (powerpc_opcodes) <"dcbt", "dcbtst">: Deprecate the Embedded operand | |
1124 | ordering for POWER4 and later and use the correct Server ordering. | |
1125 | ||
ce2f5b3c L |
1126 | 2009-02-04 H.J. Lu <hongjiu.lu@intel.com> |
1127 | ||
1128 | AVX Programming Reference (January, 2009) | |
1129 | * i386-dis.c (PREFIX_VEX_3A44): New. | |
1130 | (VEX_LEN_3A44_P_2): Likewise. | |
1131 | (PREFIX_VEX_3A48): Updated. | |
1132 | (VEX_LEN_3A4C_P_2): Likewise. | |
1133 | (prefix_table): Add PREFIX_VEX_3A44. | |
1134 | (vex_table): Likewise. | |
1135 | (vex_len_table): Add VEX_LEN_3A44_P_2. | |
1136 | ||
1137 | * i386-opc.tbl: Add PCLMUL + AVX instructions. | |
1138 | * i386-tbl.h: Regenerated. | |
1139 | ||
52b6b6b9 JM |
1140 | 2009-02-03 Sandip Matte <sandip@rmicorp.com> |
1141 | ||
1142 | * mips-dis.c (mips_cp0_names_xlr, mips_cp0sel_names_xlr): Define. | |
1143 | (mips_arch_choices): Add XLR entry. | |
1144 | * mips-opc.c (XLR): Define. | |
1145 | (mips_builtin_opcodes): Add XLR instructions. | |
1146 | ||
31dd3154 JM |
1147 | 2009-02-03 Carlos O'Donell <carlos@codesourcery.com> |
1148 | ||
1149 | * Makefile.am: Add install-pdf target. | |
1150 | * po/Make-in: Add install-pdf target. | |
1151 | * Makefile.in: Regenerate. | |
1152 | ||
c1a0a41f DD |
1153 | 2009-02-02 DJ Delorie <dj@redhat.com> |
1154 | ||
1155 | * mep-asm.c: Regenerate. | |
1156 | * mep-desc.c: Regenerate. | |
1157 | * mep-desc.h: Regenerate. | |
1158 | * mep-dis.c: Regenerate. | |
1159 | * mep-ibld.c: Regenerate. | |
1160 | * mep-opc.c: Regenerate. | |
1161 | * mep-opc.h: Regenerate. | |
1162 | ||
087b80de JM |
1163 | 2009-01-29 Mark Mitchell <mark@codesourcery.com> |
1164 | ||
1165 | * arm-dis.c (thumb32_opcodes): Correct decoding for qadd, qdadd, | |
1166 | qsub, and qdsub. | |
1167 | ||
159073e6 NC |
1168 | 2009-01-28 Chao-ying Fu <fu@mips.com> |
1169 | ||
e0c483d6 | 1170 | * mips-opc.c (suxc1): Add the flag of FP_D. |
159073e6 | 1171 | |
6f3b91a6 AM |
1172 | 2009-01-20 Alan Modra <amodra@bigpond.net.au> |
1173 | ||
1174 | * fr30-asm.c, fr30-dis.c, fr30-ibld.c, frv-asm.c, frv-dis.c, | |
1175 | * frv-ibld.c, ip2k-asm.c, ip2k-dis.c, ip2k-ibld.c, | |
1176 | * iq2000-asm.c, iq2000-dis.c, iq2000-ibld.c, m32c-asm.c, | |
1177 | * m32c-dis.c, m32c-ibld.c, m32r-asm.c, m32r-dis.c, | |
1178 | * m32r-ibld.c, mep-asm.c, mep-dis.c, mep-ibld.c, mt-asm.c, | |
1179 | * mt-dis.c, mt-ibld.c, openrisc-asm.c, openrisc-dis.c, | |
1180 | * openrisc-ibld.c, xc16x-asm.c, xc16x-dis.c, xc16x-ibld.c, | |
1181 | * xstormy16-asm.c, xstormy16-dis.c, xstormy16-ibld.c: Regenerate. | |
1182 | ||
29670fb9 AM |
1183 | 2009-01-16 Alan Modra <amodra@bigpond.net.au> |
1184 | ||
1185 | * configure.in (commonbfdlib): Delete. | |
1186 | (SHARED_LIBADD): Add pic libiberty if such is available. | |
1187 | * configure: Regenerate. | |
1188 | * po/POTFILES.in: Regenerate. | |
1189 | ||
21169fcf PB |
1190 | 2009-01-14 Peter Bergner <bergner@vnet.ibm.com> |
1191 | ||
1192 | * ppc-dis.c (print_insn_powerpc): Skip insn if it is deprecated. | |
1193 | * ppc-opc.c (powerpc_opcodes) <mtfsf, mtfsf.>: Deprecate the two | |
1194 | operand form and enable the four operand form for POWER6 and later. | |
1195 | <mtfsfi, mtfsfi.>: Deprecate the two operand form and enable the | |
1196 | three operand form for POWER6 and later. | |
1197 | ||
4ca47a51 MF |
1198 | 2009-01-14 Mike Frysinger <vapier@gentoo.org> |
1199 | ||
1200 | * bfin-dis.c (OUTS): Use "%s" as format string. | |
1201 | ||
8acd5377 L |
1202 | 2009-01-13 H.J. Lu <hongjiu.lu@intel.com> |
1203 | ||
1204 | * i386-gen.c (cpu_flag_init): Remove a white space. | |
1205 | (operand_type_init): Likewise. | |
1206 | ||
c1ec1875 L |
1207 | 2009-01-12 H.J. Lu <hongjiu.lu@intel.com> |
1208 | ||
1209 | * i386-opc.tbl: Add NoAVX to movnti, lfence and mfence. | |
1210 | * i386-tbl.h: Regenerated. | |
1211 | ||
c7532693 L |
1212 | 2009-01-12 H.J. Lu <hongjiu.lu@intel.com> |
1213 | ||
1214 | * i386-dis.c (dis386): Use EbS on addB, orB, adcB, sbbB, andB, | |
1215 | subB, xorB and cmpB. Use EvS on addS, orS, adcS, sbbS, andS, | |
1216 | subS, xorS and cmpS. | |
1217 | ||
bd5295b2 L |
1218 | 2009-01-10 H.J. Lu <hongjiu.lu@intel.com> |
1219 | ||
1220 | * i386-gen.c (cpu_flag_init): Replace CpuP4 and CpuK6 with | |
1221 | CpuClflush and CpuSYSCALL, respectively. Remove CpuK8. Add | |
1222 | CPU_COREI7_FLAGS, CPU_CLFLUSH_FLAGS and CPU_SYSCALL_FLAGS. | |
1223 | (cpu_flags): Remove CpuP4, CpuK6 and CpuK8. Add CpuClflush | |
1224 | and CpuSYSCALL. | |
1225 | (lineno): Removed. | |
1226 | (set_bitfield): Take an argument, lineno. Don't report lineno | |
1227 | on error if it is -1. | |
1228 | (process_i386_cpu_flag): Take an argument, lineno. | |
1229 | (process_i386_opcode_modifier): Likewise. | |
1230 | (process_i386_operand_type): Likewise. | |
1231 | (output_i386_opcode): Likewise. | |
1232 | (opcode_hash_entry): Add lineno. | |
1233 | (process_i386_opcodes): Updated. | |
1234 | (process_i386_registers): Likewise. | |
1235 | (process_i386_initializers): Likewise. | |
1236 | ||
1237 | * i386-opc.h (CpuP4): Removed. | |
1238 | (CpuK6): Likewise. | |
1239 | (CpuK8): Likewise. | |
1240 | (CpuClflush): New. | |
1241 | (CpuSYSCALL): Likewise. | |
1242 | (CpuMMX): Updated. | |
1243 | (i386_cpu_flags): Remove cpup4, cpuk6 and cpuk8. Add | |
1244 | cpuclflush and cpusyscall. | |
1245 | ||
1246 | * i386-opc.tbl: Update movnti, clflush, lfence, mfence, pause, | |
1247 | syscall and sysret. | |
1248 | * i386-init.h: Regenerated. | |
1249 | * i386-tbl.h: Likewise. | |
1250 | ||
1b7f3fb0 L |
1251 | 2009-01-09 H.J. Lu <hongjiu.lu@intel.com> |
1252 | ||
1253 | * i386-gen.c (cpu_flag_init): Add CpuRdtscp to CPU_K8_FLAGS | |
1254 | and CPU_AMDFAM10_FLAGS. Add CPU_RDTSCP_FLAGS. | |
1255 | (cpu_flags): Add CpuRdtscp. | |
1256 | (set_bitfield): Remove CpuSledgehammer check. | |
1257 | ||
1258 | * i386-opc.h (CpuRdtscp): New. | |
1259 | (CpuLM): Updated. | |
1260 | (i386_cpu_flags): Add cpurdtscp. | |
1261 | ||
1262 | * i386-opc.tbl: Replace CpuSledgehammer with CpuRdtscp. | |
1263 | * i386-init.h: Regenerated. | |
1264 | * i386-tbl.h: Likewise. | |
1265 | ||
1cb0a767 PB |
1266 | 2009-01-09 Peter Bergner <bergner@vnet.ibm.com> |
1267 | ||
1268 | * ppc-opc.c (PPCNONE): Define. | |
1269 | (NOPOWER4): Delete. | |
1270 | (powerpc_opcodes): Initialize the new "deprecated" field. | |
1271 | ||
168e3097 L |
1272 | 2009-01-06 H.J. Lu <hongjiu.lu@intel.com> |
1273 | ||
1274 | AVX Programming Reference (December, 2008) | |
1275 | * i386-dis.c (VEX_LEN_2B_M_0): Removed. | |
1276 | (VEX_LEN_E7_P_2_M_0): Likewise. | |
1277 | (VEX_LEN_2C_P_1): Updated. | |
1278 | (VEX_LEN_E8_P_2): Likewise. | |
1279 | (vex_len_table): Remove VEX_LEN_2B_M_0 and VEX_LEN_E7_P_2_M_0. | |
1280 | (mod_table): Likewise. | |
1281 | ||
1282 | * i386-opc.tbl: Add 256bit vmovntdq, vmovntpd and vmovntps. | |
1283 | * i386-tbl.h: Regenerated. | |
1284 | ||
22da050b L |
1285 | 2009-01-05 H.J. Lu <hongjiu.lu@intel.com> |
1286 | ||
1287 | * i386-gen.c (process_copyright): Update for 2009. | |
1288 | ||
1289 | * i386-init.h: Regenerated. | |
1290 | * i386-tbl.h: Likewise. | |
1291 | ||
0bfee649 | 1292 | 2009-01-05 H.J. Lu <hongjiu.lu@intel.com> |
6194aaab | 1293 | |
0bfee649 L |
1294 | AVX Programming Reference (December, 2008) |
1295 | * i386-dis.c (OP_VEX_FMA): Removed. | |
c0f3af97 | 1296 | (OP_EX_VexW): Likewise. |
0bfee649 | 1297 | (OP_EX_VexImmW): Likewise. |
c0f3af97 | 1298 | (OP_XMM_VexW): Likewise. |
c0f3af97 | 1299 | (VEXI4_Fixup): Likewise. |
c0f3af97 | 1300 | (VPERMIL2_Fixup): Likewise. |
c0f3af97 | 1301 | (VexI4): Likewise. |
0bfee649 L |
1302 | (VexFMA): Likewise. |
1303 | (Vex128FMA): Likewise. | |
c0f3af97 L |
1304 | (EXVexW): Likewise. |
1305 | (EXdVexW): Likewise. | |
1306 | (EXqVexW): Likewise. | |
0bfee649 | 1307 | (EXVexImmW): Likewise. |
c0f3af97 | 1308 | (XMVexW): Likewise. |
c0f3af97 | 1309 | (VPERMIL2): Likewise. |
0bfee649 L |
1310 | (PREFIX_VEX_3A48...PREFIX_VEX_3A4A): Likewise. |
1311 | (PREFIX_VEX_3A5C...PREFIX_VEX_3A5F): Likewise. | |
1312 | (PREFIX_VEX_3A68...PREFIX_VEX_3A6F): Likewise. | |
1313 | (PREFIX_VEX_3A78...PREFIX_VEX_3A7F): Likewise. | |
1314 | (VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2): Likewise. | |
1315 | (VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2): Likewise. | |
1316 | (get_vex_imm8): Likewise. | |
1317 | (OP_EX_VexReg): Likewise. | |
1318 | vpermil2_op): Likewise. | |
1319 | (EXVexWdq): New. | |
1320 | (vex_w_dq_mode): Likewise. | |
1321 | (PREFIX_VEX_3896...PREFIX_VEX_389F): Likewise. | |
1322 | (PREFIX_VEX_38A6...PREFIX_VEX_38AF): Likewise. | |
1323 | (PREFIX_VEX_38B6...PREFIX_VEX_38BF): Likewise. | |
1324 | (es_reg): Updated. | |
1325 | (PREFIX_VEX_38DB): Likewise. | |
1326 | (PREFIX_VEX_3A4A): Likewise. | |
1327 | (PREFIX_VEX_3A60): Likewise. | |
1328 | (PREFIX_VEX_3ADF): Likewise. | |
1329 | (VEX_LEN_3ADF_P_2): Likewise. | |
1330 | (prefix_table): Remove PREFIX_VEX_3A48...PREFIX_VEX_3A4A, | |
e0c483d6 | 1331 | PREFIX_VEX_3A5C...PREFIX_VEX_3A5F, |
0bfee649 L |
1332 | PREFIX_VEX_3A68...PREFIX_VEX_3A6F and |
1333 | PREFIX_VEX_3A78...PREFIX_VEX_3A7F. Add | |
1334 | PREFIX_VEX_3896...PREFIX_VEX_389F, | |
1335 | PREFIX_VEX_38A6...PREFIX_VEX_38AF and | |
1336 | PREFIX_VEX_38B6...PREFIX_VEX_38BF. | |
c0f3af97 | 1337 | (vex_table): Likewise. |
0bfee649 L |
1338 | (vex_len_table): Remove VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2 |
1339 | and VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2. | |
1340 | (putop): Support "%XW". | |
1341 | (intel_operand_size): Handle vex_w_dq_mode. | |
58c85be7 | 1342 | |
0bfee649 | 1343 | * i386-opc.h (VexNDS): Add a comment for VEX NDS and VEX DDS. |
58c85be7 | 1344 | |
0bfee649 L |
1345 | * i386-opc.tbl: Remove vpermil2pd/vpermil2ps and old FMA |
1346 | instructions. Add new FMA instructions. | |
28dbc079 L |
1347 | * i386-tbl.h: Regenerated. |
1348 | ||
e0c483d6 | 1349 | 2009-01-02 Matthias Klose <doko@ubuntu.com> |
3fe15143 | 1350 | |
e0c483d6 AM |
1351 | * or32-opc.c (or32_print_register, or32_print_immediate, |
1352 | disassemble_insn): Don't rely on undefined sprintf behaviour. | |
3fe15143 | 1353 | |
0bfee649 | 1354 | For older changes see ChangeLog-2008 |
252b5132 RH |
1355 | \f |
1356 | Local Variables: | |
2f6d2f85 NC |
1357 | mode: change-log |
1358 | left-margin: 8 | |
1359 | fill-column: 74 | |
252b5132 RH |
1360 | version-control: never |
1361 | End: |