gas/testsuite/

[deliverable/binutils-gdb.git] / opcodes / ChangeLog

2013-07-07  Richard Sandiford  <rdsandiford@googlemail.com>

	* mips16-opc.c: Add entries for argumentless "entry" and "exit"
	instructions.

2013-07-07  Richard Sandiford  <rdsandiford@googlemail.com>

	* mips-opc.c (mips_builtin_opcodes): Use "Q" for the INSN_5400
	MDMX-like instructions.
	* mips-dis.c (print_insn_arg): Use "$f" rather than "$v" when
	printing "Q" operands for INSN_5400 instructions.

2013-07-07  Richard Sandiford  <rdsandiford@googlemail.com>

	* mips-opc.c (mips_builtin_opcodes): Use "+s" for "cins32" and
	"+S" for "cins".
	* mips-dis.c (print_mips_arg): Update "+s" and "+S" comments.
	Combine cases.

2013-07-07  Richard Sandiford  <rdsandiford@googlemail.com>

	* mips-opc.c (mips_builtin_opcodes): Use "+i" rather than "a" for
	"jalx".
	* mips16-opc.c (mips16_opcodes): Likewise.
	* micromips-opc.c (micromips_opcodes): Likewise.
	* mips-dis.c (print_insn_args, print_mips16_insn_arg)
	(print_insn_mips16): Handle "+i".
	(print_insn_micromips): Likewise.  Conditionally preserve the
	ISA bit for "a" but not for "+i".

2013-07-07  Richard Sandiford  <rdsandiford@googlemail.com>

	* micromips-opc.c (WR_mhi): Rename to..
	(WR_mh): ...this.
	(micromips_opcodes): Update "movep" entry accordingly.  Replace
	"mh,mi" with "mh".
	* mips-dis.c (micromips_to_32_reg_h_map): Rename to...
	(micromips_to_32_reg_h_map1): ...this.
	(micromips_to_32_reg_i_map): Rename to...
	(micromips_to_32_reg_h_map2): ...this.
	(print_micromips_insn): Remove "mi" case.  Print both registers
	in the pair for "mh".

2013-07-07  Richard Sandiford  <rdsandiford@googlemail.com>

	* mips-opc.c (mips_builtin_opcodes): Remove "+D" and "+T" entries.
	* micromips-opc.c (micromips_opcodes): Likewise.
	* mips-dis.c (print_insn_args, print_insn_micromips): Remove "+D"
	and "+T" handling.  Check for a "0" suffix when deciding whether to
	use coprocessor 0 names.  In that case, also check for ",H" selectors.

2013-07-05  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

	* s390-opc.c (J12_12, J24_24): New macros.
	(INSTR_MII_UPI): Rename to INSTR_MII_UPP.
	(MASK_MII_UPI): Rename to MASK_MII_UPP.
	* s390-opc.txt: Rename MII_UPI to MII_UPP for bprp instruction.

2013-07-04  Alan Modra  <amodra@gmail.com>

	* ppc-opc.c (powerpc_opcodes): Add tdui, twui, tdu, twu, tui, tu.

2013-06-26  Nick Clifton  <nickc@redhat.com>

	* rx-decode.opc (rx_decode_opcode): Check sd field as well as ss
	field when checking for type 2 nop.
	* rx-decode.c: Regenerate.

2013-06-25  Maciej W. Rozycki  <macro@codesourcery.com>

	* micromips-opc.c (micromips_opcodes): Add "jraddiusp", "jrc"
	and "movep" macros.

2013-06-24  Maciej W. Rozycki  <macro@codesourcery.com>

	* mips-dis.c (is_mips16_plt_tail): New function.
	(print_insn_mips16): Handle MIPS16 PLT entry's GOT slot address
	word.
	(is_compressed_mode_p): Handle MIPS16/microMIPS PLT entries.

2013-06-21  DJ Delorie  <dj@redhat.com>

	* msp430-decode.opc: New.
	* msp430-decode.c: New/generated.
	* Makefile.am (TARGET_LIBOPCODES_CFILES): Add msp430-decode.c.
	(MAINTAINER_CLEANFILES): Likewise.
	Add rule to build msp430-decode.c frommsp430decode.opc
        using the opc2c program.
	* Makefile.in: Regenerate.
	* configure.in: Add msp430-decode.lo to msp430 architecture files.
	* configure: Regenerate.

2013-06-20  Yufeng Zhang  <yufeng.zhang@arm.com>

	* aarch64-dis.c (EMBEDDED_ENV): Remove the check on it.
	(SYMTAB_AVAILABLE): Removed.
	(#include "elf/aarch64.h): Ditto.

2013-06-17  Catherine Moore  <clm@codesourcery.com>
	    Maciej W. Rozycki  <macro@codesourcery.com>
	    Chao-Ying Fu  <fu@mips.com>

	* micromips-opc.c (EVA): Define.
	(TLBINV): Define.
	(micromips_opcodes): Add EVA opcodes.
	* mips-dis.c (mips_arch_choices): Update for ASE_EVA.
	(print_insn_args): Handle EVA offsets.
	(print_insn_micromips): Likewise.
	* mips-opc.c (EVA): Define.
	(TLBINV): Define.
	(mips_builtin_opcodes): Add EVA opcodes.

2013-06-17  Alan Modra  <amodra@gmail.com>

	* Makefile.am (mips-opc.lo): Add rules to create automatic
	dependency files.  Pass archdefs.
	(micromips-opc.lo, mips16-opc.lo): Likewise.
	* Makefile.in: Regenerate.

2013-06-14  DJ Delorie  <dj@redhat.com>

	* rx-decode.opc (rx_decode_opcode): Bit operations on
	registers are 32-bit operations, not 8-bit operations.
	* rx-decode.c: Regenerate.

2013-06-13  Chao-ying Fu  <Chao-ying.Fu@imgtec.com>

	* micromips-opc.c (IVIRT): New define.
	(IVIRT64): New define.
	(micromips_opcodes): Add dmfgc0, dmtgc0, hypcall, mfgc0, mtgc0,
 	tlbginv, tlbginvf, tlbgp, tlbgr, tlbgwi, tlbgwr VIRT instructions.

	* mips-dis.c (print_insn_micromips): Handle mfgc0, mtgc0, dmfgc0,
	dmtgc0 to print cp0 names.

2013-06-09  Sandra Loosemore  <sandra@codesourcery.com>

	* nios2-opc.c (nios2_builtin_opcodes): Give "trap" a type-"b"
	argument.

2013-06-08  Catherine Moore  <clm@codesourcery.com>
	    Richard Sandiford  <rdsandiford@googlemail.com>

	* micromips-opc.c (D32, D33, MC): Update definitions.
 	(micromips_opcodes):  Initialize ase field.
	* mips-dis.c (mips_arch_choice): Add ase field.
	(mips_arch_choices): Initialize ase field.
	(set_default_mips_dis_options): Declare and setup mips_ase.
	* mips-opc.c (M3D, SMT, MX, IVIRT, IVIRT64, D32, D33, D64,
	MT32, MC): Update definitions.
	(mips_builtin_opcodes): Initialize ase field.

2013-05-24  Richard Sandiford  <rsandifo@linux.vnet.ibm.com>

	* s390-opc.txt (flogr): Require a register pair destination.

2013-05-23  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

	* s390-opc.c: Fix length operand in RSL_LRDFU and RSL_LRDFEU
	instruction format.

2013-05-22  Jürgen Urban  <JuergenUrban@gmx.de>

	* mips-opc.c (mips_builtin_opcodes): Add R5900 VU0 instructions.

2013-05-20  Peter Bergner <bergner@vnet.ibm.com>

	* ppc-dis.c (powerpc_init_dialect): Set default dialect to power8.
	* ppc-opc.c (BHRBE, ST, SIX, PS, SXL, VXPS_MASK, XX1RB_MASK,
	XLS_MASK, PPCVSX2): New defines.
	(powerpc_opcodes) <bcdadd., bcdsub., bctar, bctar, bctarl, clrbhrb,
	fmrgew, fmrgow, lqarx, lxsiwax, lxsiwzx, lxsspx, mfbhrbe,
	mffprd, mffprwz, mfvrd, mfvrwz, mfvsrd, mfvsrwz, msgclrp, msgsndp,
	mtfprd, mtfprwa, mtfprwz, mtsle, mtvrd, mtvrwa, mtvrwz, mtvsrd,
	mtvsrwa, mtvsrwz, pbt., rfebb, stqcx., stxsiwx, stxsspx,
	vaddcuq, vaddecuq, vaddeuqm, vaddudm, vadduqm, vbpermq, vcipher,
	vcipherlast, vclzb, vclzd, vclzh, vclzw, vcmpequd, vcmpequd.,
	vcmpgtsd, vcmpgtsd., vcmpgtud, vcmpgtud., veqv, vgbbd, vmaxsd,
	vmaxud, vminsd, vminud, vmrgew, vmrgow, vmulesw, vmuleuw, vmulosw,
	vmulouw, vmuluwm, vnand, vncipher, vncipherlast, vorc, vpermxor,
	vpksdss, vpksdus, vpkudum, vpkudus, vpmsumb, vpmsumd, vpmsumh,
	vpmsumw, vpopcntb, vpopcntd, vpopcnth, vpopcntw, vrld, vsbox,
	vshasigmad, vshasigmaw, vsld, vsrad, vsrd, vsubcuq, vsubecuq,
	vsubeuqm, vsubudm, vsubuqm, vupkhsw, vupklsw, waitasec, xsaddsp,
	xscvdpspn, xscvspdpn, xscvsxdsp, xscvuxdsp, xsdivsp, xsmaddasp,
	xsmaddmsp, xsmsubasp, xsmsubmsp, xsmulsp, xsnmaddasp, xsnmaddmsp,
	xsnmsubasp, xsnmsubmsp, xsresp, xsrsp, xsrsqrtesp, xssqrtsp,
	xssubsp, xxleqv, xxlnand, xxlorc>: New instructions.
	<lxvx, stxvx>: New extended mnemonics.

2013-05-17  Alan Modra  <amodra@gmail.com>

	* ia64-raw.tbl: Replace non-ASCII char.
	* ia64-waw.tbl: Likewise.
	* ia64-asmtab.c: Regenerate.

2013-05-15  Saravanan Ekanathan <saravanan.ekanathan@amd.com>

	* i386-gen.c (cpu_flag_init): Add CpuFSGSBase in CPU_BDVER3_FLAGS.
	* i386-init.h: Regenerated.

2013-05-13  Yufeng Zhang  <yufeng.zhang@arm.com>

	* aarch64-asm.c (aarch64_ins_advsimd_imm_modified): Remove assertion.
	* aarch64-opc.c (operand_general_constraint_met_p): Relax the range
	check from [0, 255] to [-128, 255].

2013-05-09  Andrew Pinski  <apinski@cavium.com>

	* mips-dis.c (mips_arch_choices): Add INSN_VIRT to mips32r2.
	Add INSN_VIRT and INSN_VIRT64 to mips64r2.
	(parse_mips_dis_option): Handle the virt option.
	(print_insn_args): Handle "+J".
	(print_mips_disassembler_options): Print out message about virt64.
	* mips-opc.c (IVIRT): New define.
	(IVIRT64): New define.
	(mips_builtin_opcodes): Add dmfgc0, dmtgc0, hypcall, mfgc0, mtgc0,
	tlbgr, tlbgwi, tlbginv, tlbginvf, tlbgwr, tlbgp VIRT instructions.
	Move rfe to the bottom as it conflicts with tlbgp.

2013-05-09  Alan Modra  <amodra@gmail.com>

	* ppc-opc.c (extract_vlesi): Properly sign extend.
	(extract_vlensi): Likewise.  Comment reason for setting invalid.

2013-05-02  Nick Clifton  <nickc@redhat.com>

	* msp430-dis.c: Add support for MSP430X instructions.

2013-04-24  Sandra Loosemore  <sandra@codesourcery.com>

	* nios2-opc.c (nios2_builtin_reg): Rename "fstatus" control register
	to "eccinj".

2013-04-17  Wei-chen Wang  <cole945@gmail.com>

	PR binutils/15369
	* cgen-dis.c (hash_insn_array): Use CGEN_CPU_INSN_ENDIAN instead
	of CGEN_CPU_ENDIAN.
	(hash_insns_list): Likewise.

2013-04-10  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* rl78-dis.c (print_insn_rl78): Use alternative form as a GCC false
	warning workaround.

2013-04-08  Jan Beulich <jbeulich@suse.com>

	* i386-opc.tbl: Fold 64-bit and non-64-bit jecxz entries.
	* i386-tbl.h: Re-generate.

2013-04-06  David S. Miller  <davem@davemloft.net>

	* sparc-dis.c (compare_opcodes): When encountering multiple aliases
	of an opcode, prefer the one with F_PREFERRED set.
	* sparc-opc.c (sparc_opcodes): Add ldtw, ldtwa, sttw, sttwa,
	lzcnt, flush with '[address]' syntax, and missing cbcond pseudo
	ops.  Make 64-bit VIS logical ops have "d" suffix in their names,
	mark existing mnenomics as aliases.  Add "cc" suffix to edge
	instructions generating condition codes, mark existing mnenomics
	as aliases.  Add "fp" prefix to VIS compare instructions, mark
	existing mnenomics as aliases.

2013-04-03  Nick Clifton  <nickc@redhat.com>

	* v850-dis.c (print_value): With V850_INVERSE_PCREL compute the
	destination address by subtracting the operand from the current
	address.
	* v850-opc.c (insert_u16_loop): Disallow negative offsets.  Store
	a positive value in the insn.
	(extract_u16_loop): Do not negate the returned value.
	(D16_LOOP): Add V850_INVERSE_PCREL flag.

	(ceilf.sw): Remove duplicate entry.
	(cvtf.hs): New entry.
	(cvtf.sh): Likewise.
	(fmaf.s): Likewise.
	(fmsf.s): Likewise.
	(fnmaf.s): Likewise.
	(fnmsf.s): Likewise.
	(maddf.s): Restrict to E3V5 architectures.
	(msubf.s): Likewise.
	(nmaddf.s): Likewise.
	(nmsubf.s): Likewise.

2013-03-27  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (get_sib): Add the sizeflag argument.  Properly
	check address mode.
	(print_insn): Pass sizeflag to get_sib.

2013-03-27  Alexis Deruelle  <alexis.deruelle@gmail.com>

	PR binutils/15068
	* tic6x-dis.c: Add support for displaying 16-bit insns.

2013-03-20  Alexis Deruelle  <alexis.deruelle@gmail.com>

	PR gas/15095
	* tic6x-dis.c (print_insn_tic6x): Decode opcodes that have
	individual msb and lsb halves in src1 & src2 fields.  Discard the
	src1 (lsb) value and only use src2 (msb), discarding bit 0, to
	follow what Ti SDK does in that case as any value in the src1
	field yields the same output with SDK disassembler.

2013-03-12  Michael Eager <eager@eagercon.com>

	* opcodes/mips-dis.c (print_insn_args): Modify def of reg.

2013-03-11  Sebastian Huber <sebastian.huber@embedded-brains.de>

	* nios2-opc.c (nios2_builtin_opcodes): Add entry for wrprs.

2013-03-11  Sebastian Huber <sebastian.huber@embedded-brains.de>

	* nios2-opc.c (nios2_builtin_opcodes): Add entry for rdprs.

2013-03-11  Sebastian Huber <sebastian.huber@embedded-brains.de>

	* nios2-opc.c (nios2_builtin_regs): Add sstatus alias for ba register.

2013-03-11  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* arm-dis.c (arm_opcodes): Add entries for CRC instructions.
	(thumb32_opcodes): Likewise.
	(print_insn_thumb32): Handle 'S' control char.

2013-03-08  Yann Sionneau  <yann.sionneau@gmail.com>

	* lm32-desc.c: Regenerate.

2013-03-01  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-reg.tbl (riz): Add RegRex64.
	* i386-tbl.h: Regenerated.

2013-02-28  Yufeng Zhang  <yufeng.zhang@arm.com>

	* aarch64-tbl.h (QL_I3SAMEW, QL_I3WWX): New macros.
	(aarch64_feature_crc): New static.
	(CRC): New macro.
	(aarch64_opcode_table): Add entries for the crc32b, crc32h, crc32w,
	crc32x, crc32cb, crc32ch, crc32cw and crc32cx instructions.
	* aarch64-asm-2.c: Re-generate.
	* aarch64-dis-2.c: Ditto.
	* aarch64-opc-2.c: Ditto.

2013-02-27  Alan Modra  <amodra@gmail.com>

	* rl78-decode.opc (rl78_decode_opcode): Fix typo.
	* rl78-decode.c: Regenerate.

2013-02-25  Kaushik Phatak  <Kaushik.Phatak@kpitcummins.com>

	* rl78-decode.opc: Fix encoding of DIVWU insn.
	* rl78-decode.c: Regenerate.

2013-02-19  H.J. Lu  <hongjiu.lu@intel.com>

	PR gas/15159
	* i386-dis.c (rm_table): Add clac and stac to RM_0F01_REG_1.

	* i386-gen.c (cpu_flag_init): Add CPU_SMAP_FLAGS.
	(cpu_flags): Add CpuSMAP.

	* i386-opc.h (CpuSMAP): New.
	(i386_cpu_flags): Add cpusmap.

	* i386-opc.tbl: Add clac and stac.

	* i386-init.h: Regenerated.
	* i386-tbl.h: Likewise.

2013-02-15  Markos Chandras  <markos.chandras@imgtec.com>

	* metag-dis.c: Initialize outf->bytes_per_chunk to 4
	which also makes the disassembler output be in little
	endian like it should be.

2013-02-14  Yufeng Zhang  <yufeng.zhang@arm.com>

	* aarch64-opc.c (aarch64_prfops): Change unnamed operation 'name'
	fields to NULL.
	(aarch64_print_operand): Adjust the printing for AARCH64_OPND_PRFOP.

2013-02-13  Maciej W. Rozycki  <macro@codesourcery.com>

	* mips-dis.c (is_compressed_mode_p): Only match symbols from the
	section disassembled.

2013-02-11  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* arm-dis.c: Update strht pattern.

2013-02-09  Jürgen Urban  <JuergenUrban@gmx.de>

	* mips-opc.c (mips_builtin_opcodes): Enable l.d and s.d macros for
	single-float.  Disable ll, lld, sc and scd for EE.  Disable the
	trunc.w.s macro for EE.

2013-02-06  Sandra Loosemore  <sandra@codesourcery.com>
            Andrew Jenner <andrew@codesourcery.com>

	Based on patches from Altera Corporation.

	* Makefile.am (TARGET_LIBOPCODES_CFILES): Add nios2-dis.c and
	nios2-opc.c.
	* Makefile.in: Regenerated.
	* configure.in: Add case for bfd_nios2_arch.
	* configure: Regenerated.
	* disassemble.c (ARCH_nios2): Define.
	(disassembler): Add case for bfd_arch_nios2.
	* nios2-dis.c: New file.
	* nios2-opc.c: New file.

2013-02-04  Alan Modra  <amodra@gmail.com>

	* po/POTFILES.in: Regenerate.
	* rl78-decode.c: Regenerate.
	* rx-decode.c: Regenerate.

2013-01-30  Yufeng Zhang  <yufeng.zhang@arm.com>

	* aarch64-tbl.h (aarch64_opcode_table): Flag sshll, sshll2, ushll and
	ushll2 with F_HAS_ALIAS.  Add entries for sxtl, sxtl2, uxtl and uxtl2.
	* aarch64-asm.c (convert_xtl_to_shll): New function.
	(convert_to_real): Handle OP_SXTL, OP_SXTL2, OP_UXTL and OP_UXTL2 by
	calling convert_xtl_to_shll.
	* aarch64-dis.c (convert_shll_to_xtl): New function.
	(convert_to_alias): Handle OP_SXTL, OP_SXTL2, OP_UXTL and OP_UXTL2 by
	calling convert_shll_to_xtl.
	* aarch64-gen.c: Update copyright year.
	* aarch64-asm-2.c: Re-generate.
	* aarch64-dis-2.c: Re-generate.
	* aarch64-opc-2.c: Re-generate.

2013-01-24  Nick Clifton  <nickc@redhat.com>

	* v850-dis.c: Add support for e3v5 architecture.
	* v850-opc.c: Likewise.

2013-01-17  Yufeng Zhang  <yufeng.zhang@arm.com>

	* aarch64-asm.c (aarch64_ins_advsimd_imm_modified): Handle 8-bit MOVI.
	* aarch64-dis.c (aarch64_ext_advsimd_imm_modified): Likewise.
	* aarch64-opc.c (operand_general_constraint_met_p): For
	AARCH64_MOD_LSL, move the range check on the shift amount before the
	alignment check; change to call set_sft_amount_out_of_range_error
	instead of set_imm_out_of_range_error.
	* aarch64-tbl.h (QL_SIMD_IMM_B): Replace NIL with LSL.
	(aarch64_opcode_table): Remove the OP enumerator from the asimdimm
	8-bit MOVI entry; change the 2nd operand from SIMD_IMM to
	SIMD_IMM_SFT.

2013-01-16  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-gen.c (operand_type_init): Add OPERAND_TYPE_IMM32_64.

	* i386-init.h: Regenerated.
	* i386-tbl.h: Likewise.

2013-01-15  Nick Clifton  <nickc@redhat.com>

	* v850-dis.c (get_operand_value): Sign extend V850E_IMMEDIATE
	values.
	* v850-opc.c (IMM16LO): Add V850_OPERAND_SIGNED attribute.

2013-01-14  Will Newton <will.newton@imgtec.com>

	* metag-dis.c (REG_WIDTH): Increase to 64.

2013-01-10  Peter Bergner <bergner@vnet.ibm.com>

	* ppc-dis.c (ppc_opts): Add "power8", "pwr8" and "htm" entries.
	* ppc-opc.c (HTM_R, HTM_SI, XRTRB_MASK, XRTRARB_MASK, XRTLRARB_MASK,
	XRTARARB_MASK, XRTBFRARB_MASK, XRCL, POWER8, PPCHTM): New defines.
	(SH6): Update.
	<"tabort.", "tabortdc.", "tabortdci.", "tabortwc.",
	"tabortwci.", "tbegin.", "tcheck", "tend.", "trechkpt.",
	"treclaim.", "tsr.">: Add POWER8 HTM opcodes.
	<"tendall.", "tresume.", "tsuspend.">: Add POWER8 HTM extended opcodes.

2013-01-10  Will Newton <will.newton@imgtec.com>

	* Makefile.am: Add Meta.
	* configure.in: Add Meta.
	* disassemble.c: Add Meta support.
	* metag-dis.c: New file.
	* Makefile.in: Regenerate.
	* configure: Regenerate.

2013-01-07  Kaushik Phatak  <kaushik.phatak@kpitcummins.com>

	* cr16-dis.c (make_instruction): Rename to cr16_make_instruction.
	(match_opcode): Rename to cr16_match_opcode.

2013-01-04  Juergen Urban <JuergenUrban@gmx.de>

	* mips-dis.c: Add names for CP0 registers of r5900.
	* mips-opc.c: Add M_SQ_AB and M_LQ_AB to support larger range for
	instructions sq and lq.
	Add support for MIPS r5900 CPU.
	Add support for 128 bit MMI (Multimedia Instructions).
	Add support for EE instructions (Emotion Engine).
	Disable unsupported floating point instructions (64 bit and
	undefined compare operations).
	Enable instructions of MIPS ISA IV which are supported by r5900.
	Disable 64 bit co processor instructions.
	Disable 64 bit multiplication and division instructions.
	Disable instructions for co-processor 2 and 3, because these are
	not supported (preparation for later VU0 support (Vector Unit)).
	Disable cvt.w.s because this behaves like trunc.w.s and the
	correct execution can't be ensured on r5900.
	Add trunc.w.s using the opcode encoding of cvt.w.s on r5900. This
	will confuse less developers and compilers.

2013-01-04  Yufeng Zhang  <yufeng.zhang@arm.com>

	* aarch64-opc.c (aarch64_print_operand): Change to print
	AARCH64_OPND_IMM_MOV in hexadecimal in the instruction and in decimal
	in comment.
	* aarch64-tbl.h (aarch64_opcode_table): Remove the 'F_PSEUDO' flag
	from the opcode entries of OP_MOV_IMM_LOG, OP_MOV_IMM_WIDEN and
	OP_MOV_IMM_WIDE.

2013-01-04  Yufeng Zhang  <yufeng.zhang@arm.com>

	* aarch64-opc.c (aarch64_prfops): Update to support PLIL1KEEP,
	PLIL1STRM, PLIL2KEEP, PLIL2STRM, PLIL3KEEP and PLIL3STRM.

2013-01-02  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-gen.c (process_copyright): Update copyright year to 2013.

2013-01-02  Kaushik Phatak  <kaushik.phatak@kpitcummins.com>

	* cr16-dis.c (match_opcode,make_instruction): Remove static
	declaration.
	(dwordU,wordU): Moved typedefs to opcode/cr16.h
	(cr16_words,cr16_allWords,cr16_currInsn): Added prefix 'cr16_'.

For older changes see ChangeLog-2012
\f
Copyright (C) 2013 Free Software Foundation, Inc.

Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
notice and this notice are preserved.

Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
End: