[deliverable/binutils-gdb.git] / opcodes / po / zh_CN.po

# Simplified Chinese translation for opcode.
# Copyright (C) 2005 Free Software Foundation, Inc.
# This file is distributed under the same license as the binutils package.
# Meng Jie <zuxyhere@eastday.com>, 2005.
# Mingye Wang <arthur200126@gmail.com>, 2015.
# Boyuan Yang <073plan@gmail.com>, 2017.
#
msgid ""
msgstr ""
"Project-Id-Version: opcodes 2.28.90\n"
"Report-Msgid-Bugs-To: bug-binutils@gnu.org\n"
"POT-Creation-Date: 2017-07-03 16:55+0200\n"
"PO-Revision-Date: 2017-11-25 20:10+0800\n"
"Last-Translator: Boyuan Yang <073plan@gmail.com>\n"
"Language-Team: Chinese (simplified) <i18n-zh@googlegroups.com>\n"
"Language: zh_CN\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
"X-Bugs: Report translation errors to the Language-Team address.\n"
"X-Generator: Poedit 2.0.4\n"

#. Invalid option.
#: aarch64-dis.c:81 arc-dis.c:775 arm-dis.c:6132
#, c-format
msgid "Unrecognised disassembler option: %s\n"
msgstr "无法识别的反汇编器选项：%s\n"

#: aarch64-dis.c:3235
#, c-format
msgid ""
"\n"
"The following AARCH64 specific disassembler options are supported for use\n"
"with the -M switch (multiple options should be separated by commas):\n"
msgstr ""
"\n"
"下列 AARCH64 特定的反汇编器选项可通过 -M 开关启用（使用逗号分隔多个选项）：\n"

#: aarch64-dis.c:3239
#, c-format
msgid ""
"\n"
"  no-aliases         Don't print instruction aliases.\n"
msgstr ""
"\n"
"  no-aliases         不要打印指令别名。\n"

#: aarch64-dis.c:3242
#, c-format
msgid ""
"\n"
"  aliases            Do print instruction aliases.\n"
msgstr ""
"\n"
"  aliases            要打印指令别名。\n"

#: aarch64-dis.c:3246
#, c-format
msgid ""
"\n"
"  debug_dump         Temp switch for debug trace.\n"
msgstr ""
"\n"
"  debug_dump         调试跟踪的临时开关。\n"

#: aarch64-dis.c:3250 mips-dis.c:2601 mips-dis.c:2609 mips-dis.c:2611
#: riscv-dis.c:507
#, c-format
msgid "\n"
msgstr "\n"

#: aarch64-opc.c:1306
msgid "immediate value"
msgstr "立即数"

#: aarch64-opc.c:1316
msgid "immediate offset"
msgstr "立即数偏移"

#: aarch64-opc.c:1326
msgid "register number"
msgstr "寄存器数"

#: aarch64-opc.c:1336
msgid "register element index"
msgstr "寄存器元素下标"

#: aarch64-opc.c:1346
msgid "shift amount"
msgstr "移位操作数"

#: aarch64-opc.c:1358
msgid "multiplier"
msgstr ""

#: aarch64-opc.c:1431
msgid "reg pair must start from even reg"
msgstr ""

#: aarch64-opc.c:1437
msgid "reg pair must be contiguous"
msgstr ""

#: aarch64-opc.c:1451
msgid "extraneous register"
msgstr "多余寄存器"

#: aarch64-opc.c:1457
msgid "missing register"
msgstr "缺失寄存器"

#: aarch64-opc.c:1468
msgid "stack pointer register expected"
msgstr "预期的堆栈指针寄存器"

#: aarch64-opc.c:1491
msgid "z0-z15 expected"
msgstr ""

#: aarch64-opc.c:1492
msgid "z0-z7 expected"
msgstr ""

#: aarch64-opc.c:1518
#, fuzzy
#| msgid "Bad register name"
msgid "invalid register list"
msgstr "%q+D的寄存器名无效"

#: aarch64-opc.c:1532
msgid "p0-p7 expected"
msgstr ""

#: aarch64-opc.c:1558 aarch64-opc.c:1566
msgid "unexpected address writeback"
msgstr "意外的地址写回"

#: aarch64-opc.c:1577
msgid "address writeback expected"
msgstr "预期的地址写回"

#: aarch64-opc.c:1623
msgid "negative or unaligned offset expected"
msgstr "预期的负或未对齐的偏移量"

#: aarch64-opc.c:1650
msgid "invalid register offset"
msgstr "无效的寄存器偏移量"

#: aarch64-opc.c:1672
#, fuzzy
msgid "invalid post-increment amount"
msgstr "类型没有后自增运算符"

#: aarch64-opc.c:1688 aarch64-opc.c:2165
msgid "invalid shift amount"
msgstr "无效的移位操作数"

#: aarch64-opc.c:1701
#, fuzzy
#| msgid "invalid conditional option"
msgid "invalid extend/shift operator"
msgstr "无效的移位操作符"

#: aarch64-opc.c:1747 aarch64-opc.c:1986 aarch64-opc.c:2021 aarch64-opc.c:2040
#: aarch64-opc.c:2048 aarch64-opc.c:2119 aarch64-opc.c:2295 aarch64-opc.c:2395
#: aarch64-opc.c:2408
msgid "immediate out of range"
msgstr "立即数越界"

#: aarch64-opc.c:1769 aarch64-opc.c:1811 aarch64-opc.c:1860 aarch64-opc.c:1894
#, fuzzy
msgid "invalid addressing mode"
msgstr "无效寻址模式"

#: aarch64-opc.c:1852
#, fuzzy
msgid "index register xzr is not allowed"
msgstr "寄存器元素下标"

#: aarch64-opc.c:1974 aarch64-opc.c:1996 aarch64-opc.c:2198 aarch64-opc.c:2206
#: aarch64-opc.c:2272 aarch64-opc.c:2301
msgid "invalid shift operator"
msgstr "无效的移位操作符"

#: aarch64-opc.c:1980
msgid "shift amount must be 0 or 12"
msgstr "移位量必须为 0 或 12"

#: aarch64-opc.c:2003
msgid "shift amount must be a multiple of 16"
msgstr "移位量必须是 16 的倍数"

#: aarch64-opc.c:2015
msgid "negative immediate value not allowed"
msgstr "不允许负立即数"

#: aarch64-opc.c:2130
#, fuzzy
msgid "immediate zero expected"
msgstr "预期的浮点常量立即数"

#: aarch64-opc.c:2144
#, fuzzy
#| msgid "shift amount expected to be 0 or 12"
msgid "rotate expected to be 0, 90, 180 or 270"
msgstr "移位量预计为 0 或 12"

#: aarch64-opc.c:2154
#, fuzzy
#| msgid "shift amount expected to be 0 or 12"
msgid "rotate expected to be 90 or 270"
msgstr "移位量预计为 0 或 12"

#: aarch64-opc.c:2214
#, fuzzy
msgid "shift is not permitted"
msgstr "指针不能用作 case 常量"

#: aarch64-opc.c:2239
#, fuzzy
#| msgid "invalid mask field"
msgid "invalid value for immediate"
msgstr "不允许负立即数"

#: aarch64-opc.c:2264
msgid "shift amount must be 0 or 16"
msgstr "移位量必须为 0 或 16"

#: aarch64-opc.c:2285
msgid "floating-point immediate expected"
msgstr "预期的浮点常量立即数"

#: aarch64-opc.c:2319
msgid "no shift amount allowed for 8-bit constants"
msgstr ""

#: aarch64-opc.c:2329
msgid "shift amount must be 0 or 8"
msgstr "移位量必须为 0 或 8"

#: aarch64-opc.c:2342
msgid "immediate too big for element size"
msgstr ""

#: aarch64-opc.c:2349
#, fuzzy
#| msgid "invalid mask field"
msgid "invalid arithmetic immediate"
msgstr "不允许负立即数"

#: aarch64-opc.c:2363
msgid "floating-point value must be 0.5 or 1.0"
msgstr ""

#: aarch64-opc.c:2373
msgid "floating-point value must be 0.5 or 2.0"
msgstr ""

#: aarch64-opc.c:2383
msgid "floating-point value must be 0.0 or 1.0"
msgstr ""

#: aarch64-opc.c:2414
#, fuzzy
#| msgid "invalid mask field"
msgid "invalid replicated MOV immediate"
msgstr "不允许负立即数"

#: aarch64-opc.c:2528
#, fuzzy
msgid "extend operator expected"
msgstr "需要%<operator%>"

#: aarch64-opc.c:2541
#, fuzzy
msgid "missing extend operator"
msgstr "扩展%s 失败"

#: aarch64-opc.c:2547
msgid "'LSL' operator not allowed"
msgstr "不允许 'LSL' 操作符"

#: aarch64-opc.c:2568
msgid "W register expected"
msgstr "预期的 W 寄存器"

#: aarch64-opc.c:2579
msgid "shift operator expected"
msgstr "预期的移位操作符"

#: aarch64-opc.c:2586
msgid "'ROR' operator not allowed"
msgstr "不允许 'ROR' 操作符"

#: alpha-opc.c:154
msgid "branch operand unaligned"
msgstr "分支操作数未对齐"

#: alpha-opc.c:170 alpha-opc.c:186
msgid "jump hint unaligned"
msgstr "跳转提示未对齐"

#: arc-dis.c:373
msgid ""
"\n"
"Warning: disassembly may be wrong due to guessed opcode class choice.\n"
"Use -M<class[,class]> to select the correct opcode class(es).\n"
"\t\t\t\t"
msgstr ""

#: arc-dis.c:817
#, c-format
msgid "Unrecognised disassembler CPU option: %s\n"
msgstr "无法识别的反汇编器 CPU 选项：%s\n"

#: arc-dis.c:1344
#, fuzzy, c-format
#| msgid ""
#| "\n"
#| "The following AARCH64 specific disassembler options are supported for use\n"
#| "with the -M switch (multiple options should be separated by commas):\n"
msgid ""
"\n"
"The following ARC specific disassembler options are supported for use \n"
"with -M switch (multiple options should be separated by commas):\n"
msgstr ""
"\n"
"下列 AARCH64 特定的反汇编器选项可通过 -M 开关启用（使用逗号分隔多个选项）：\n"

#: arc-dis.c:1356
#, c-format
msgid "  dsp             Recognize DSP instructions.\n"
msgstr "  dsp             识别 DSP 指令。\n"

#: arc-dis.c:1358
#, c-format
msgid "  spfp            Recognize FPX SP instructions.\n"
msgstr "  spfp            识别 FPX SP 指令。\n"

#: arc-dis.c:1360
#, c-format
msgid "  dpfp            Recognize FPX DP instructions.\n"
msgstr "  dpfp            识别 FPX DP 指令。\n"

#: arc-dis.c:1362
#, fuzzy, c-format
#| msgid ""
#| "\n"
#| "  msa             Recognize MSA instructions.\n"
msgid "  quarkse_em      Recognize FPU QuarkSE-EM instructions.\n"
msgstr ""
"\n"
"  msa             识别 MSA 指令。\n"

#: arc-dis.c:1364
#, fuzzy, c-format
#| msgid ""
#| "\n"
#| "  msa             Recognize MSA instructions.\n"
msgid "  fpuda           Recognize double assist FPU instructions.\n"
msgstr ""
"\n"
"  msa             识别 MSA 指令。\n"

#: arc-dis.c:1366
#, c-format
msgid "  fpus            Recognize single precision FPU instructions.\n"
msgstr "  fpus            识别单精度 FPU 指令。\n"

#: arc-dis.c:1368
#, c-format
msgid "  fpud            Recognize double precision FPU instructions.\n"
msgstr "  fpud            识别双精度 FPU 指令。\n"

#: arc-opc.c:41 arc-opc.c:64 arc-opc.c:90
msgid "LP_COUNT register cannot be used as destination register"
msgstr ""

#: arc-opc.c:88
msgid "cannot use odd number destination register"
msgstr ""

#: arc-opc.c:101
msgid "cannot use odd number source register"
msgstr ""

#: arc-opc.c:114
msgid "operand is not zero"
msgstr "操作数不是 0"

#: arc-opc.c:173
msgid "Register R30 is a limm indicator"
msgstr ""

#: arc-opc.c:192
#, fuzzy
#| msgid "register number must be even"
msgid "Register must be R0"
msgstr "寄存器数必须是偶数"

#: arc-opc.c:210
#, fuzzy
#| msgid "register number must be even"
msgid "Register must be R1"
msgstr "寄存器数必须是偶数"

#: arc-opc.c:227
#, fuzzy
#| msgid "register number must be even"
msgid "Register must be R2"
msgstr "寄存器数必须是偶数"

#: arc-opc.c:244
#, fuzzy
#| msgid "register number must be even"
msgid "Register must be R3"
msgstr "寄存器数必须是偶数"

#: arc-opc.c:261
#, fuzzy
#| msgid "register number must be even"
msgid "Register must be SP"
msgstr "寄存器数必须是偶数"

#: arc-opc.c:278
#, fuzzy
#| msgid "register number must be even"
msgid "Register must be GP"
msgstr "寄存器数必须是偶数"

#: arc-opc.c:295
#, fuzzy
#| msgid "register number must be even"
msgid "Register must be PCL"
msgstr "寄存器数必须是偶数"

#: arc-opc.c:312
#, fuzzy
#| msgid "register number must be even"
msgid "Register must be BLINK"
msgstr "寄存器数必须是偶数"

#: arc-opc.c:329
#, fuzzy
#| msgid "register number must be even"
msgid "Register must be ILINK1"
msgstr "寄存器数必须是偶数"

#: arc-opc.c:346
#, fuzzy
#| msgid "register number must be even"
msgid "Register must be ILINK2"
msgstr "寄存器数必须是偶数"

#. ARC NPS400 Support: See comment near head of file.
#: arc-opc.c:377 arc-opc.c:415 arc-opc.c:453 arc-opc.c:718
#, fuzzy
#| msgid "register number must be even"
msgid "Register must be either r0-r3 or r12-r15"
msgstr "登记册必须 r8 和 r15 之间"

#: arc-opc.c:504
msgid "Accepted values are from -1 to 6"
msgstr ""

#: arc-opc.c:533
msgid "First register of the range should be r13"
msgstr ""

#: arc-opc.c:535
msgid "Last register of the range doesn't fit"
msgstr ""

#: arc-opc.c:555 arc-opc.c:570
#, fuzzy
#| msgid "Bad register name"
msgid "Invalid register number, should be fp"
msgstr "%q+D的寄存器名无效"

#: arc-opc.c:592
#, fuzzy
#| msgid "Bad register name"
msgid "Invalid register number, should be blink"
msgstr "%q+D的寄存器名无效"

#: arc-opc.c:614
#, fuzzy
#| msgid "Bad register name"
msgid "Invalid register number, should be pcl"
msgstr "%q+D的寄存器名无效"

#: arc-opc.c:766
msgid "Invalid size, should be 1, 2, 4, or 8"
msgstr ""

#: arc-opc.c:811
msgid "invalid immediate, must be 1, 2, or 4"
msgstr ""

#: arc-opc.c:850
#, fuzzy
#| msgid "invalid mask field"
msgid "invalid value for CMEM ld/st immediate"
msgstr "不允许负立即数"

#: arc-opc.c:877
msgid "Invalid position, should be 0, 16, 32, 48 or 64."
msgstr "无效的位置，应当为 0、16、32、48 或 64。"

#: arc-opc.c:911
msgid "Invalid position, should be 16, 32, 64 or 128."
msgstr "无效的位置，应当为 16、32、64 或 128。"

#: arc-opc.c:933
#, fuzzy
#| msgid "immediate value out of range"
msgid "Invalid size value must be on range 1-64."
msgstr "立即数越界"

#: arc-opc.c:964
msgid "Invalid position, should be 0, 8, 16, or 24"
msgstr "无效的位置，应当为 0、8、16 或 24"

#: arc-opc.c:989
#, fuzzy
#| msgid "immediate value must be even"
msgid "Invalid size, value must be "
msgstr "DO 步进值为零"

#: arc-opc.c:1063
#, fuzzy
#| msgid "branch value out of range"
msgid "value out of range 1 - 256"
msgstr "跳转越界"

#: arc-opc.c:1072
#, fuzzy
#| msgid "immediate value must be even"
msgid "value must be power of 2"
msgstr "DO 步进值为零"

#: arc-opc.c:1125
msgid "Value must be in the range 0 to 28"
msgstr "值必须在 0 到 28 的范围中"

#: arc-opc.c:1147
msgid "Value must be in the range 1 to "
msgstr "值的范围必须在 1 到 "

#: arc-opc.c:1177
msgid "Value must be in the range 0 to 240"
msgstr "值必须在 0 到 240 的范围中"

#: arc-opc.c:1179
msgid "Value must be a multiple of 16"
msgstr "值必须是 16 的倍数"

#: arc-opc.c:1199
msgid "Invalid address type for operand"
msgstr ""

#: arc-opc.c:1233
msgid "Value must be in the range 0 to 31"
msgstr "值必须在 0 到 31 的范围中"

#: arc-opc.c:1258
msgid "Invalid position, should be 0,4, 8,...124."
msgstr "无效的位置，应当为 0、4、8、...、124。"

#: arm-dis.c:3202
#, fuzzy
#| msgid "Bad register name"
msgid "Select raw register names"
msgstr "错误的寄存器名"

#: arm-dis.c:3204
msgid "Select register names used by GCC"
msgstr ""

#: arm-dis.c:3206
msgid "Select register names used in ARM's ISA documentation"
msgstr ""

#: arm-dis.c:3208
msgid "Assume all insns are Thumb insns"
msgstr ""

#: arm-dis.c:3209
msgid "Examine preceding label to determine an insn's type"
msgstr ""

#: arm-dis.c:3210
#, fuzzy
#| msgid "register number must be even"
msgid "Select register names used in the APCS"
msgstr "立即数不能是寄存器"

#: arm-dis.c:3212
#, fuzzy
#| msgid "register number must be even"
msgid "Select register names used in the ATPCS"
msgstr "立即数不能是寄存器"

#: arm-dis.c:3214
msgid "Select special register names used in the ATPCS"
msgstr ""

#: arm-dis.c:3612
msgid "<illegal precision>"
msgstr "<非法的精度>"

#: arm-dis.c:6125
#, c-format
msgid "Unrecognised register name set: %s\n"
msgstr "无法识别的寄存器名称集：%s\n"

#: arm-dis.c:6829
#, c-format
msgid ""
"\n"
"The following ARM specific disassembler options are supported for use with\n"
"the -M switch:\n"
msgstr ""
"\n"
"下列 ARM 特定的反汇编器选项可通过 -M 开关启用：\n"

#: avr-dis.c:115 avr-dis.c:136
#, c-format
msgid "undefined"
msgstr "未定义"

#: avr-dis.c:215
#, c-format
msgid "Internal disassembler error"
msgstr "反汇编器内部错误"

#: avr-dis.c:268
#, c-format
msgid "unknown constraint `%c'"
msgstr "未知的约束‘%c’"

#: cgen-asm.c:351 epiphany-ibld.c:200 fr30-ibld.c:200 frv-ibld.c:200
#: ip2k-ibld.c:200 iq2000-ibld.c:200 lm32-ibld.c:200 m32c-ibld.c:200
#: m32r-ibld.c:200 mep-ibld.c:200 mt-ibld.c:200 or1k-ibld.c:200
#: xc16x-ibld.c:200 xstormy16-ibld.c:200
#, c-format
msgid "operand out of range (%ld not between %ld and %ld)"
msgstr "操作数越界(%ld 不在 %ld 和 %ld 之间)"

#: cgen-asm.c:373
#, c-format
msgid "operand out of range (%lu not between %lu and %lu)"
msgstr "操作数越界(%lu 不在 %lu 和 %lu 之间)"

#: d30v-dis.c:254
#, c-format
msgid "<unknown register %d>"
msgstr "<未知的寄存器 %d>"

#. Can't happen.
#: dis-buf.c:61
#, c-format
msgid "Unknown error %d\n"
msgstr "未知错误 %d\n"

#: dis-buf.c:70
#, c-format
msgid "Address 0x%s is out of bounds.\n"
msgstr "地址 0x%s 越界。\n"

#: epiphany-asm.c:67
#, fuzzy
#| msgid "unrecognized form of instruction"
msgid "register unavailable for short instructions"
msgstr "启用对短加载指令的使用"

#: epiphany-asm.c:114
#, fuzzy
#| msgid "register number must be even"
msgid "register name used as immediate value"
msgstr "立即数不能是寄存器"

#. Don't treat "mov ip,ip" as a move-immediate.
#: epiphany-asm.c:177 epiphany-asm.c:233
#, fuzzy
msgid "register source in immediate move"
msgstr "立即数不能是寄存器"

#: epiphany-asm.c:186
#, fuzzy
msgid "byte relocation unsupported"
msgstr "不支持的 .stab 重定位"

#. -- assembler routines inserted here.
#. -- asm.c
#: epiphany-asm.c:192 frv-asm.c:971 iq2000-asm.c:55 lm32-asm.c:94
#: lm32-asm.c:126 lm32-asm.c:156 lm32-asm.c:186 lm32-asm.c:216 lm32-asm.c:246
#: m32c-asm.c:139 m32c-asm.c:234 m32c-asm.c:275 m32c-asm.c:333 m32c-asm.c:354
#: m32r-asm.c:52 mep-asm.c:240 mep-asm.c:258 mep-asm.c:273 mep-asm.c:288
#: mep-asm.c:300 or1k-asm.c:53
msgid "missing `)'"
msgstr "缺少‘)’"

#: epiphany-asm.c:269
msgid "ABORT: unknown operand"
msgstr "中止：未知的操作数"

#: epiphany-asm.c:295
#, fuzzy
msgid "Not a pc-relative address."
msgstr "生成相对 pc 的代码"

#: epiphany-asm.c:454 fr30-asm.c:309 frv-asm.c:1262 ip2k-asm.c:510
#: iq2000-asm.c:458 lm32-asm.c:348 m32c-asm.c:1583 m32r-asm.c:327
#: mep-asm.c:1286 mt-asm.c:594 or1k-asm.c:502 xc16x-asm.c:375
#: xstormy16-asm.c:275
#, fuzzy, c-format
msgid "Unrecognized field %d while parsing.\n"
msgstr "打印 insn 时遇到无法识别的字段 %d。\n"

#: epiphany-asm.c:505 fr30-asm.c:360 frv-asm.c:1313 ip2k-asm.c:561
#: iq2000-asm.c:509 lm32-asm.c:399 m32c-asm.c:1634 m32r-asm.c:378
#: mep-asm.c:1337 mt-asm.c:645 or1k-asm.c:553 xc16x-asm.c:426
#: xstormy16-asm.c:326
msgid "missing mnemonic in syntax string"
msgstr "语法字符串中没有助记符"

#. We couldn't parse it.
#: epiphany-asm.c:640 epiphany-asm.c:644 epiphany-asm.c:733 epiphany-asm.c:840
#: fr30-asm.c:495 fr30-asm.c:499 fr30-asm.c:588 fr30-asm.c:695 frv-asm.c:1448
#: frv-asm.c:1452 frv-asm.c:1541 frv-asm.c:1648 ip2k-asm.c:696 ip2k-asm.c:700
#: ip2k-asm.c:789 ip2k-asm.c:896 iq2000-asm.c:644 iq2000-asm.c:648
#: iq2000-asm.c:737 iq2000-asm.c:844 lm32-asm.c:534 lm32-asm.c:538
#: lm32-asm.c:627 lm32-asm.c:734 m32c-asm.c:1769 m32c-asm.c:1773
#: m32c-asm.c:1862 m32c-asm.c:1969 m32r-asm.c:513 m32r-asm.c:517
#: m32r-asm.c:606 m32r-asm.c:713 mep-asm.c:1472 mep-asm.c:1476 mep-asm.c:1565
#: mep-asm.c:1672 mt-asm.c:780 mt-asm.c:784 mt-asm.c:873 mt-asm.c:980
#: or1k-asm.c:688 or1k-asm.c:692 or1k-asm.c:781 or1k-asm.c:888 xc16x-asm.c:561
#: xc16x-asm.c:565 xc16x-asm.c:654 xc16x-asm.c:761 xstormy16-asm.c:461
#: xstormy16-asm.c:465 xstormy16-asm.c:554 xstormy16-asm.c:661
msgid "unrecognized instruction"
msgstr "无法识别的指令"

#: epiphany-asm.c:687 fr30-asm.c:542 frv-asm.c:1495 ip2k-asm.c:743
#: iq2000-asm.c:691 lm32-asm.c:581 m32c-asm.c:1816 m32r-asm.c:560
#: mep-asm.c:1519 mt-asm.c:827 or1k-asm.c:735 xc16x-asm.c:608
#: xstormy16-asm.c:508
#, c-format
msgid "syntax error (expected char `%c', found `%c')"
msgstr "语法错误(需要字符‘%c’，得到‘%c’)"

#: epiphany-asm.c:697 fr30-asm.c:552 frv-asm.c:1505 ip2k-asm.c:753
#: iq2000-asm.c:701 lm32-asm.c:591 m32c-asm.c:1826 m32r-asm.c:570
#: mep-asm.c:1529 mt-asm.c:837 or1k-asm.c:745 xc16x-asm.c:618
#: xstormy16-asm.c:518
#, c-format
msgid "syntax error (expected char `%c', found end of instruction)"
msgstr "语法错误(需要字符‘%c’，却到达指令尾)"

#: epiphany-asm.c:727 fr30-asm.c:582 frv-asm.c:1535 ip2k-asm.c:783
#: iq2000-asm.c:731 lm32-asm.c:621 m32c-asm.c:1856 m32r-asm.c:600
#: mep-asm.c:1559 mt-asm.c:867 or1k-asm.c:775 xc16x-asm.c:648
#: xstormy16-asm.c:548
msgid "junk at end of line"
msgstr "行尾有垃圾字符"

#: epiphany-asm.c:839 fr30-asm.c:694 frv-asm.c:1647 ip2k-asm.c:895
#: iq2000-asm.c:843 lm32-asm.c:733 m32c-asm.c:1968 m32r-asm.c:712
#: mep-asm.c:1671 mt-asm.c:979 or1k-asm.c:887 xc16x-asm.c:760
#: xstormy16-asm.c:660
msgid "unrecognized form of instruction"
msgstr "无法识别的指令格式"

#: epiphany-asm.c:853 fr30-asm.c:708 frv-asm.c:1661 ip2k-asm.c:909
#: iq2000-asm.c:857 lm32-asm.c:747 m32c-asm.c:1982 m32r-asm.c:726
#: mep-asm.c:1685 mt-asm.c:993 or1k-asm.c:901 xc16x-asm.c:774
#: xstormy16-asm.c:674
#, c-format
msgid "bad instruction `%.50s...'"
msgstr "错误的指令‘%.50s...’"

#: epiphany-asm.c:856 fr30-asm.c:711 frv-asm.c:1664 ip2k-asm.c:912
#: iq2000-asm.c:860 lm32-asm.c:750 m32c-asm.c:1985 m32r-asm.c:729
#: mep-asm.c:1688 mt-asm.c:996 or1k-asm.c:904 xc16x-asm.c:777
#: xstormy16-asm.c:677
#, c-format
msgid "bad instruction `%.50s'"
msgstr "错误的指令‘%.50s’"

#. Default text to print if an instruction isn't recognized.
#: epiphany-dis.c:40 fr30-dis.c:40 frv-dis.c:40 ip2k-dis.c:40 iq2000-dis.c:40
#: lm32-dis.c:40 m32c-dis.c:40 m32r-dis.c:40 mep-dis.c:40 mmix-dis.c:276
#: mt-dis.c:40 nds32-dis.c:39 or1k-dis.c:40 xc16x-dis.c:40 xstormy16-dis.c:40
msgid "*unknown*"
msgstr "*未知*"

#: epiphany-dis.c:277 fr30-dis.c:298 frv-dis.c:395 ip2k-dis.c:287
#: iq2000-dis.c:188 lm32-dis.c:146 m32c-dis.c:890 m32r-dis.c:278
#: mep-dis.c:1186 mt-dis.c:289 or1k-dis.c:140 xc16x-dis.c:419
#: xstormy16-dis.c:167
#, c-format
msgid "Unrecognized field %d while printing insn.\n"
msgstr "打印 insn 时遇到无法识别的字段 %d。\n"

#: epiphany-ibld.c:163 fr30-ibld.c:163 frv-ibld.c:163 ip2k-ibld.c:163
#: iq2000-ibld.c:163 lm32-ibld.c:163 m32c-ibld.c:163 m32r-ibld.c:163
#: mep-ibld.c:163 mt-ibld.c:163 or1k-ibld.c:163 xc16x-ibld.c:163
#: xstormy16-ibld.c:163
#, c-format
msgid "operand out of range (%ld not between %ld and %lu)"
msgstr "操作数越界 (%ld 不在 %ld 和 %lu 之间)"

#: epiphany-ibld.c:184 fr30-ibld.c:184 frv-ibld.c:184 ip2k-ibld.c:184
#: iq2000-ibld.c:184 lm32-ibld.c:184 m32c-ibld.c:184 m32r-ibld.c:184
#: mep-ibld.c:184 mt-ibld.c:184 or1k-ibld.c:184 xc16x-ibld.c:184
#: xstormy16-ibld.c:184
#, fuzzy, c-format
#| msgid "operand out of range (%lu not between 0 and %lu)"
msgid "operand out of range (0x%lx not between 0 and 0x%lx)"
msgstr "操作数超出范围 (0x %lx 请不是 0 和 0x %lx 之间)"

#: epiphany-ibld.c:878 fr30-ibld.c:733 frv-ibld.c:859 ip2k-ibld.c:610
#: iq2000-ibld.c:716 lm32-ibld.c:637 m32c-ibld.c:1734 m32r-ibld.c:668
#: mep-ibld.c:1211 mt-ibld.c:752 or1k-ibld.c:649 xc16x-ibld.c:755
#: xstormy16-ibld.c:681
#, c-format
msgid "Unrecognized field %d while building insn.\n"
msgstr "建立 insn 时遇到无法识别的字段 %d。\n"

#: epiphany-ibld.c:1172 fr30-ibld.c:938 frv-ibld.c:1176 ip2k-ibld.c:685
#: iq2000-ibld.c:891 lm32-ibld.c:741 m32c-ibld.c:2895 m32r-ibld.c:805
#: mep-ibld.c:1810 mt-ibld.c:972 or1k-ibld.c:754 xc16x-ibld.c:975
#: xstormy16-ibld.c:827
#, c-format
msgid "Unrecognized field %d while decoding insn.\n"
msgstr "解码 insn 时遇到无法识别的字段 %d。\n"

#: epiphany-ibld.c:1315 fr30-ibld.c:1084 frv-ibld.c:1454 ip2k-ibld.c:759
#: iq2000-ibld.c:1022 lm32-ibld.c:830 m32c-ibld.c:3512 m32r-ibld.c:918
#: mep-ibld.c:2280 mt-ibld.c:1172 or1k-ibld.c:837 xc16x-ibld.c:1196
#: xstormy16-ibld.c:937
#, c-format
msgid "Unrecognized field %d while getting int operand.\n"
msgstr "获得 int 操作数时遇到无法识别的字段 %d。\n"

#: epiphany-ibld.c:1440 fr30-ibld.c:1212 frv-ibld.c:1714 ip2k-ibld.c:815
#: iq2000-ibld.c:1135 lm32-ibld.c:901 m32c-ibld.c:4111 m32r-ibld.c:1013
#: mep-ibld.c:2732 mt-ibld.c:1354 or1k-ibld.c:902 xc16x-ibld.c:1399
#: xstormy16-ibld.c:1029
#, c-format
msgid "Unrecognized field %d while getting vma operand.\n"
msgstr "获得 vma 操作数时遇到无法识别的字段 %d。\n"

#: epiphany-ibld.c:1572 fr30-ibld.c:1343 frv-ibld.c:1981 ip2k-ibld.c:874
#: iq2000-ibld.c:1255 lm32-ibld.c:979 m32c-ibld.c:4698 m32r-ibld.c:1114
#: mep-ibld.c:3145 mt-ibld.c:1543 or1k-ibld.c:974 xc16x-ibld.c:1603
#: xstormy16-ibld.c:1128
#, c-format
msgid "Unrecognized field %d while setting int operand.\n"
msgstr "设置 int 操作数时遇到无法识别的字段 %d。\n"

#: epiphany-ibld.c:1694 fr30-ibld.c:1464 frv-ibld.c:2238 ip2k-ibld.c:923
#: iq2000-ibld.c:1365 lm32-ibld.c:1047 m32c-ibld.c:5275 m32r-ibld.c:1205
#: mep-ibld.c:3548 mt-ibld.c:1722 or1k-ibld.c:1036 xc16x-ibld.c:1797
#: xstormy16-ibld.c:1217
#, c-format
msgid "Unrecognized field %d while setting vma operand.\n"
msgstr "设置 vma 操作数时遇到无法识别的字段 %d。\n"

#: fr30-asm.c:92 m32c-asm.c:871 m32c-asm.c:878
#, fuzzy
#| msgid "register number must be even"
msgid "Register number is not valid"
msgstr "寄存器数必须是偶数"

#: fr30-asm.c:94
#, fuzzy
#| msgid "register number must be even"
msgid "Register must be between r0 and r7"
msgstr "登记册必须 r0 和 r7 之间"

#: fr30-asm.c:96
#, fuzzy
#| msgid "register number must be even"
msgid "Register must be between r8 and r15"
msgstr "登记册必须 r8 和 r15 之间"

#: fr30-asm.c:115 m32c-asm.c:909
#, fuzzy
msgid "Register list is not valid"
msgstr "注册"

#: frv-asm.c:607
msgid "missing `]'"
msgstr "缺少 `]'"

#: frv-asm.c:610 frv-asm.c:620
#, fuzzy
#| msgid "immediate value is out of range"
msgid "Special purpose register number is out of range"
msgstr "专用寄存器的编号是超出范围"

#: frv-asm.c:907
#, fuzzy
msgid "Value of A operand must be 0 or 1"
msgstr "数字必须是 0 或 1"

#: frv-asm.c:943
msgid "register number must be even"
msgstr "寄存器数必须是偶数"

#: h8300-dis.c:313
#, c-format
msgid "Hmmmm 0x%x"
msgstr "咦... 0x%x"

#: h8300-dis.c:690
#, fuzzy, c-format
msgid "Don't understand 0x%x \n"
msgstr "无法识别的重定位类型 0x%x"

#: h8500-dis.c:123
#, fuzzy, c-format
msgid "can't cope with insert %d\n"
msgstr "无法清除未激活的密钥 %d。\n"

#. Couldn't understand anything.
#: h8500-dis.c:323
#, c-format
msgid "%02x\t\t*unknown*"
msgstr "%02x\t\t*未知*"

#: i386-dis.c:12280
msgid "<internal disassembler error>"
msgstr "<反汇编器内部错误>"

#: i386-dis.c:12579
#, c-format
msgid ""
"\n"
"The following i386/x86-64 specific disassembler options are supported for use\n"
"with the -M switch (multiple options should be separated by commas):\n"
msgstr ""
"\n"
"下列 i386/x86-64 特定的反汇编器选项在使用 -M 开关时可用（使用逗号分隔多个选项）：\n"

#: i386-dis.c:12583
#, c-format
msgid "  x86-64      Disassemble in 64bit mode\n"
msgstr "  x86-64      在 64 位模式下反汇编\n"

#: i386-dis.c:12584
#, c-format
msgid "  i386        Disassemble in 32bit mode\n"
msgstr "  i386        在 32 位模式下反汇编\n"

#: i386-dis.c:12585
#, c-format
msgid "  i8086       Disassemble in 16bit mode\n"
msgstr "  i8086       在 16 位模式下反汇编\n"

#: i386-dis.c:12586
#, c-format
msgid "  att         Display instruction in AT&T syntax\n"
msgstr "  att         用 AT&T 语法显示指令\n"

#: i386-dis.c:12587
#, c-format
msgid "  intel       Display instruction in Intel syntax\n"
msgstr "  intel       用 Intel 语法显示指令\n"

#: i386-dis.c:12588
#, fuzzy, c-format
msgid ""
"  att-mnemonic\n"
"              Display instruction in AT&T mnemonic\n"
msgstr "  att         用 AT&T 语法显示指令\n"

#: i386-dis.c:12590
#, fuzzy, c-format
msgid ""
"  intel-mnemonic\n"
"              Display instruction in Intel mnemonic\n"
msgstr "  intel       用 Intel 语法显示指令\n"

#: i386-dis.c:12592
#, c-format
msgid "  addr64      Assume 64bit address size\n"
msgstr "  addr64      假定 64 位地址大小\n"

#: i386-dis.c:12593
#, c-format
msgid "  addr32      Assume 32bit address size\n"
msgstr "  addr32      假定 32 位地址大小\n"

#: i386-dis.c:12594
#, c-format
msgid "  addr16      Assume 16bit address size\n"
msgstr "  addr16      假定 16 位地址大小\n"

#: i386-dis.c:12595
#, c-format
msgid "  data32      Assume 32bit data size\n"
msgstr "  data32      假定 32 位数据大小\n"

#: i386-dis.c:12596
#, c-format
msgid "  data16      Assume 16bit data size\n"
msgstr "  data16      假定 16 位数据大小\n"

#: i386-dis.c:12597
#, c-format
msgid "  suffix      Always display instruction suffix in AT&T syntax\n"
msgstr "  suffix      在 AT&T 语法中始终显示指令后缀\n"

#: i386-dis.c:12598
#, fuzzy, c-format
#| msgid "  att         Display instruction in AT&T syntax\n"
msgid "  amd64       Display instruction in AMD64 ISA\n"
msgstr "  att         用 AT&T 语法显示指令\n"

#: i386-dis.c:12599
#, fuzzy, c-format
#| msgid "  intel       Display instruction in Intel syntax\n"
msgid "  intel64     Display instruction in Intel64 ISA\n"
msgstr "  intel       用 Intel 语法显示指令\n"

#: i386-dis.c:13150
msgid "64-bit address is disabled"
msgstr "64 位地址已禁用"

#: i386-gen.c:683 ia64-gen.c:306
#, c-format
msgid "%s: Error: "
msgstr "%s：错误："

#: i386-gen.c:847
#, fuzzy, c-format
msgid "%s: %d: Unknown bitfield: %s\n"
msgstr "行 %d：未知标签：%s\n"

#: i386-gen.c:849
#, fuzzy, c-format
#| msgid "Unknown error %d\n"
msgid "Unknown bitfield: %s\n"
msgstr "%s：未知函数‘%u’\n"

#: i386-gen.c:908
#, fuzzy, c-format
msgid "%s: %d: Missing `)' in bitfield: %s\n"
msgstr "缺少 %s%d %s：%s\n"

#: i386-gen.c:1179
#, fuzzy, c-format
msgid "can't find i386-opc.tbl for reading, errno = %s\n"
msgstr "找不到阅读，errno i386 opc.tbl = %s"

#: i386-gen.c:1310
#, fuzzy, c-format
msgid "can't find i386-reg.tbl for reading, errno = %s\n"
msgstr "找不到阅读，errno i386 reg.tbl = %s"

#: i386-gen.c:1387
#, fuzzy, c-format
msgid "can't create i386-init.h, errno = %s\n"
msgstr "无法创建 i386-init.h，errno = %s"

#: i386-gen.c:1477 ia64-gen.c:2829
#, c-format
msgid "unable to change directory to \"%s\", errno = %s\n"
msgstr "无法将当前目录切换至“%s”，errno = %s\n"

#: i386-gen.c:1489 i386-gen.c:1492
#, c-format
msgid "CpuMax != %d!\n"
msgstr ""

#: i386-gen.c:1496
#, c-format
msgid "%d unused bits in i386_cpu_flags.\n"
msgstr ""

#: i386-gen.c:1503
#, fuzzy, c-format
msgid "%d unused bits in i386_operand_type.\n"
msgstr "%d 未使用的钻头在 i386_operand_type。"

#: i386-gen.c:1517
#, fuzzy, c-format
msgid "can't create i386-tbl.h, errno = %s\n"
msgstr "无法创建 i386-tbl.h，errno = %s"

#: ia64-gen.c:319
#, c-format
msgid "%s: Warning: "
msgstr "%s：警告："

#: ia64-gen.c:505 ia64-gen.c:736
#, fuzzy, c-format
msgid "multiple note %s not handled\n"
msgstr "%s：多次重复定义符号“%s”"

#: ia64-gen.c:616
#, fuzzy
msgid "can't find ia64-ic.tbl for reading\n"
msgstr "找不到 ia64 ic.tbl 阅读"

#: ia64-gen.c:818
#, fuzzy, c-format
msgid "can't find %s for reading\n"
msgstr "%s：无法找到模块文件 %s\n"

#: ia64-gen.c:1050
#, fuzzy, c-format
msgid ""
"most recent format '%s'\n"
"appears more restrictive than '%s'\n"
msgstr "最新格式 %s 似乎比 %s 的限制性更强"

#: ia64-gen.c:1061
#, fuzzy, c-format
msgid "overlapping field %s->%s\n"
msgstr "缺少字段‘%s’，在‘%s’中"

#: ia64-gen.c:1258
#, fuzzy, c-format
msgid "overwriting note %d with note %d (IC:%s)\n"
msgstr "用注 %d (IC:%s) 覆盖注 %d"

#: ia64-gen.c:1465
#, c-format
msgid "don't know how to specify %% dependency %s\n"
msgstr "不知道如何指定 %% 依赖 %s\n"

#: ia64-gen.c:1487
#, c-format
msgid "Don't know how to specify # dependency %s\n"
msgstr "不知道如何指定 # 依赖 %s\n"

#: ia64-gen.c:1526
#, fuzzy, c-format
msgid "IC:%s [%s] has no terminals or sub-classes\n"
msgstr "IC:%s [%s] 没有任何终端或子类"

#: ia64-gen.c:1529
#, fuzzy, c-format
msgid "IC:%s has no terminals or sub-classes\n"
msgstr "IC:%s 有没有终端或子类"

#: ia64-gen.c:1538
#, fuzzy, c-format
msgid "no insns mapped directly to terminal IC %s [%s]"
msgstr "没有 insn 被直接映射到终端 IC %s [%s]"

#: ia64-gen.c:1541
#, fuzzy, c-format
msgid "no insns mapped directly to terminal IC %s\n"
msgstr "没有 insn 被直接映射到终端 IC %s\n"

#: ia64-gen.c:1552
#, fuzzy, c-format
msgid "class %s is defined but not used\n"
msgstr "%q+D定义后未使用"

#: ia64-gen.c:1565
#, fuzzy, c-format
msgid "Warning: rsrc %s (%s) has no chks\n"
msgstr "警告：%s 节的大小为零"

#: ia64-gen.c:1568
#, fuzzy, c-format
msgid "Warning: rsrc %s (%s) has no chks or regs\n"
msgstr "指数部分没有数字"

#: ia64-gen.c:1572
#, fuzzy, c-format
msgid "rsrc %s (%s) has no regs\n"
msgstr "%s 已不可访问"

#: ia64-gen.c:2464
#, c-format
msgid "IC note %d in opcode %s (IC:%s) conflicts with resource %s note %d\n"
msgstr ""

#: ia64-gen.c:2492
#, c-format
msgid "IC note %d for opcode %s (IC:%s) conflicts with resource %s note %d\n"
msgstr ""

#: ia64-gen.c:2506
#, fuzzy, c-format
msgid "opcode %s has no class (ops %d %d %d)\n"
msgstr "尚未定义名为“%s”的 <draw_ops>"

#. We've been passed a w.  Return with an error message so that
#. cgen will try the next parsing option.
#: ip2k-asm.c:80
msgid "W keyword invalid in FR operand slot."
msgstr "W 关键字非法，在 FR 操作数槽位中。"

#. Invalid offset present.
#: ip2k-asm.c:105
msgid "offset(IP) is not a valid form"
msgstr "偏移量（IP）不是合法格式"

#. Found something there in front of (DP) but it's out
#. of range.
#: ip2k-asm.c:153
msgid "(DP) offset out of range."
msgstr "(DP) 偏移量越界"

#. Found something there in front of (SP) but it's out
#. of range.
#: ip2k-asm.c:194
msgid "(SP) offset out of range."
msgstr "(SP) 偏移量越界。"

#: ip2k-asm.c:210
msgid "illegal use of parentheses"
msgstr "括号用法非法"

#: ip2k-asm.c:217
#, fuzzy
msgid "operand out of range (not between 1 and 255)"
msgstr "操作数越界(%ld 不在 %ld 和 %ld 之间)"

#. Something is very wrong. opindex has to be one of the above.
#: ip2k-asm.c:241
#, fuzzy
msgid "parse_addr16: invalid opindex."
msgstr "无效的‘asm’："

#: ip2k-asm.c:295
msgid "Byte address required. - must be even."
msgstr ""

#: ip2k-asm.c:304
msgid "cgen_parse_address returned a symbol. Literal required."
msgstr ""

#: ip2k-asm.c:359
#, fuzzy
msgid "percent-operator operand is not a symbol"
msgstr "%%L处的 .not. 运算符的操作数为 %s"

#: ip2k-asm.c:412
msgid "Attempt to find bit index of 0"
msgstr ""

#: iq2000-asm.c:111 iq2000-asm.c:141
msgid "immediate value cannot be register"
msgstr "立即数不能是寄存器"

#: iq2000-asm.c:122 iq2000-asm.c:152 lm32-asm.c:69
msgid "immediate value out of range"
msgstr "立即数越界"

#: iq2000-asm.c:181
msgid "21-bit offset out of range"
msgstr "21位长的偏移量越界"

#: lm32-asm.c:165
#, fuzzy
msgid "expecting gp relative address: gp(symbol)"
msgstr "不能使用非 GP 相对的绝对地址"

#: lm32-asm.c:195
msgid "expecting got relative address: got(symbol)"
msgstr ""

#: lm32-asm.c:225
msgid "expecting got relative address: gotoffhi16(symbol)"
msgstr ""

#: lm32-asm.c:255
msgid "expecting got relative address: gotofflo16(symbol)"
msgstr ""

#: m10200-dis.c:157 m10300-dis.c:580
#, c-format
msgid "unknown\t0x%04lx"
msgstr "未知\t0x%04lx"

#: m10200-dis.c:327
#, c-format
msgid "unknown\t0x%02lx"
msgstr "未知\t0x%02lx"

#: m32c-asm.c:116
msgid "imm:6 immediate is out of range"
msgstr "imm:6 立即数越界"

#: m32c-asm.c:144
#, c-format
msgid "%dsp8() takes a symbolic address, not a number"
msgstr "%dsp8() 使用一个符号地址，而非数字"

#: m32c-asm.c:158 m32c-asm.c:162 m32c-asm.c:252
msgid "dsp:8 immediate is out of range"
msgstr "dsp:8 立即数越界"

#: m32c-asm.c:183 m32c-asm.c:187
msgid "Immediate is out of range -8 to 7"
msgstr "立即数越界 (-8 到 7)"

#: m32c-asm.c:208 m32c-asm.c:212
msgid "Immediate is out of range -7 to 8"
msgstr "立即数越界 (-7 到 8)"

#: m32c-asm.c:280
#, c-format
msgid "%dsp16() takes a symbolic address, not a number"
msgstr "%dsp16() 使用一个符号地址，而非数字"

#: m32c-asm.c:304 m32c-asm.c:311 m32c-asm.c:372
msgid "dsp:16 immediate is out of range"
msgstr "dsp:16 立即数越界"

#: m32c-asm.c:398
msgid "dsp:20 immediate is out of range"
msgstr "dsp:20 立即数越界"

#: m32c-asm.c:424 m32c-asm.c:444
msgid "dsp:24 immediate is out of range"
msgstr "dsp:24 立即数越界"

#: m32c-asm.c:477
msgid "immediate is out of range 1-2"
msgstr "立即数越界 1-2"

#: m32c-asm.c:495
msgid "immediate is out of range 1-8"
msgstr "立即数越界 1-8"

#: m32c-asm.c:513
msgid "immediate is out of range 0-7"
msgstr "立即数越界 0-7"

#: m32c-asm.c:549
msgid "immediate is out of range 2-9"
msgstr "立即数越界 2-9"

#: m32c-asm.c:567
msgid "Bit number for indexing general register is out of range 0-15"
msgstr ""

#: m32c-asm.c:605 m32c-asm.c:661
#, fuzzy
#| msgid "immediate value is out of range"
msgid "bit,base is out of range"
msgstr "立即数越界"

#: m32c-asm.c:612 m32c-asm.c:617 m32c-asm.c:665
#, fuzzy
#| msgid "21-bit offset out of range"
msgid "bit,base out of range for symbol"
msgstr "21位长的偏移量越界"

#: m32c-asm.c:801
#, fuzzy
msgid "not a valid r0l/r0h pair"
msgstr "有效的参数为：\n"

#: m32c-asm.c:831
#, fuzzy
#| msgid "invalid mask field"
msgid "Invalid size specifier"
msgstr "%s：无效的新列指定符号“%s”\n"

#: m68k-dis.c:1292
#, c-format
msgid "<function code %d>"
msgstr "<函数代码 %d>"

#: m68k-dis.c:1455
#, c-format
msgid "<internal error in opcode table: %s %s>\n"
msgstr "<操作数表中出现内部错误：%s %s>\n"

#: m88k-dis.c:678
#, c-format
msgid "# <dis error: %08lx>"
msgstr "# <反汇编出错: %08lx>"

#: mep-asm.c:128
msgid "Only $tp or $13 allowed for this opcode"
msgstr ""

#: mep-asm.c:142
msgid "Only $sp or $15 allowed for this opcode"
msgstr ""

#: mep-asm.c:307 mep-asm.c:503
#, fuzzy, c-format
msgid "invalid %function() here"
msgstr "%qE未声明(不在函数内)"

#: mep-asm.c:335
msgid "Immediate is out of range -32768 to 32767"
msgstr "立即数越界 (-32768 到 32767)"

#: mep-asm.c:355
msgid "Immediate is out of range 0 to 65535"
msgstr "立即数越界 (0 到 65535)"

#: mep-asm.c:548 mep-asm.c:561
msgid "Immediate is out of range -512 to 511"
msgstr "立即数越界 (-512 到 511)"

#: mep-asm.c:553 mep-asm.c:562
msgid "Immediate is out of range -128 to 127"
msgstr "立即数越界 (-128 到 127)"

#: mep-asm.c:557
msgid "Value is not aligned enough"
msgstr "数值对齐程度不够"

#: mips-dis.c:1751 mips-dis.c:1977
#, fuzzy, c-format
#| msgid "# internal error, undefined modifier(%c)"
msgid "# internal error, undefined operand in `%s %s'"
msgstr "<操作数表中出现内部错误：%s %s>\n"

#: mips-dis.c:2553
#, c-format
msgid ""
"\n"
"The following MIPS specific disassembler options are supported for use\n"
"with the -M switch (multiple options should be separated by commas):\n"
msgstr ""
"\n"
"下列 MIPS 特定的反汇编器选项可通过 -M 开关启用（使用逗号分隔多个选项）：\n"

#: mips-dis.c:2557
#, fuzzy, c-format
#| msgid ""
#| "\n"
#| "  aliases            Do print instruction aliases.\n"
msgid ""
"\n"
"  no-aliases               Use canonical instruction forms.\n"
msgstr ""
"\n"
"  aliases            要打印指令别名。\n"

#: mips-dis.c:2560
#, fuzzy, c-format
#| msgid ""
#| "\n"
#| "  msa             Recognize MSA instructions.\n"
msgid ""
"\n"
"  msa                      Recognize MSA instructions.\n"
msgstr ""
"\n"
"  msa             识别 MSA 指令。\n"

#: mips-dis.c:2563
#, fuzzy, c-format
#| msgid ""
#| "\n"
#| "  virt            Recognize the virtualization ASE instructions.\n"
msgid ""
"\n"
"  virt                     Recognize the virtualization ASE instructions.\n"
msgstr ""
"\n"
"  virt            识别虚拟化 ASE 指令。\n"

#: mips-dis.c:2566
#, c-format
msgid ""
"\n"
"  xpa                      Recognize the eXtended Physical Address (XPA)\n"
"                           ASE instructions.\n"
msgstr ""

#: mips-dis.c:2570
#, fuzzy, c-format
#| msgid ""
#| "\n"
#| "  gpr-names=ABI            Print GPR names according to  specified ABI.\n"
#| "                           Default: based on binary being disassembled.\n"
msgid ""
"\n"
"  gpr-names=ABI            Print GPR names according to specified ABI.\n"
"                           Default: based on binary being disassembled.\n"
msgstr ""
"\n"
"  gpr-names=ABI            根据指定的 ABI 打印通用寄存器名。\n"
"                           默认：根据被反汇编的二进制文件。\n"

#: mips-dis.c:2574
#, c-format
msgid ""
"\n"
"  fpr-names=ABI            Print FPR names according to specified ABI.\n"
"                           Default: numeric.\n"
msgstr ""
"\n"
"  fpr-names=ABI            根据指定的 ABI 打印浮点寄存器名。\n"
"                           默认：数字。\n"

#: mips-dis.c:2578
#, c-format
msgid ""
"\n"
"  cp0-names=ARCH           Print CP0 register names according to\n"
"                           specified architecture.\n"
"                           Default: based on binary being disassembled.\n"
msgstr ""
"\n"
"  cp0-names=ARCH           根据指定的架构打印 CP0 寄存器名。\n"
"                           默认：根据被反汇编的二进制代码。\n"

#: mips-dis.c:2583
#, fuzzy, c-format
#| msgid ""
#| "\n"
#| "  hwr-names=ARCH           Print HWR names according to specified \n"
#| "\t\t\t   architecture.\n"
#| "                           Default: based on binary being disassembled.\n"
msgid ""
"\n"
"  hwr-names=ARCH           Print HWR names according to specified \n"
"                           architecture.\n"
"                           Default: based on binary being disassembled.\n"
msgstr ""
"\n"
"  hwr-names=ARCH           根据指定的架构打印 HWR 寄存器名。\n"
"                           默认：根据被反汇编的二进制代码。\n"

#: mips-dis.c:2588
#, c-format
msgid ""
"\n"
"  reg-names=ABI            Print GPR and FPR names according to\n"
"                           specified ABI.\n"
msgstr ""
"\n"
"  reg-names=ABI            根据指定的 ABI 打印通用寄存器和浮点寄存\n"
"                           器名。\n"

#: mips-dis.c:2592
#, c-format
msgid ""
"\n"
"  reg-names=ARCH           Print CP0 register and HWR names according to\n"
"                           specified architecture.\n"
msgstr ""
"\n"
"  reg-names=ARCH           根据指定的架构打印 CP0 和 HWR 寄存器名。\n"

#: mips-dis.c:2596
#, c-format
msgid ""
"\n"
"  For the options above, the following values are supported for \"ABI\":\n"
"   "
msgstr ""
"\n"
"  对于以上的选项，以下值可被用于 \"ABI\"：\n"
"   "

#: mips-dis.c:2603
#, c-format
msgid ""
"\n"
"  For the options above, The following values are supported for \"ARCH\":\n"
"   "
msgstr ""
"\n"
"  对于以上的选项，以下值可被用于 \"ARCH\"：\n"
"   "

#: mmix-dis.c:34
#, fuzzy, c-format
msgid "Bad case %d (%s) in %s:%d\n"
msgstr "行 %d: 不当的 no%s 数字：%d\n"

#: mmix-dis.c:44
#, c-format
msgid "Internal: Non-debugged code (test-case missing): %s:%d"
msgstr ""

#: mmix-dis.c:53
msgid "(unknown)"
msgstr "(未知)"

#: mmix-dis.c:511
#, fuzzy, c-format
msgid "*unknown operands type: %d*"
msgstr "%s：未知的重定位类型 %d"

#: msp430-dis.c:59
#, c-format
msgid "Warning: disassembly unreliable - not enough bytes available"
msgstr "警告：反汇编不可靠 - 没有足够的可用字节"

#: msp430-dis.c:65
#, c-format
msgid "Error: read from memory failed"
msgstr "错误：从内存读取失败"

#: msp430-dis.c:499
#, fuzzy
msgid "Warning: illegal as emulation instr"
msgstr "不要使用 fabss 自定义指令"

#. R2/R3 are illegal as dest: may be data section.
#: msp430-dis.c:591
#, fuzzy
msgid "Warning: illegal as 2-op instr"
msgstr "不要使用 fabss 自定义指令"

#: msp430-dis.c:1002
#, fuzzy
msgid "Warning: unrecognised CALLA addressing mode"
msgstr "无效寻址模式"

#: msp430-dis.c:1303 msp430-dis.c:1324 msp430-dis.c:1345
#, c-format
msgid "Warning: reserved use of A/L and B/W bits detected"
msgstr ""

#: mt-asm.c:109 mt-asm.c:189
#, fuzzy
msgid "Operand out of range. Must be between -32768 and 32767."
msgstr "操作数越界(%lu 不在 0 和 %lu 之间)"

#: mt-asm.c:148
msgid "Biiiig Trouble in parse_imm16!"
msgstr ""

#: mt-asm.c:156
#, fuzzy
msgid "The percent-operator's operand is not a symbol"
msgstr "%%L处的 .not. 运算符的操作数为 %s"

#: mt-asm.c:394
msgid "invalid operand.  type may have values 0,1,2 only."
msgstr ""

#. I and Z are output operands and can`t be immediate
#. A is an address and we can`t have the address of
#. an immediate either. We don't know how much to increase
#. aoffsetp by since whatever generated this is broken
#. anyway!
#: ns32k-dis.c:533
#, c-format
msgid "$<undefined>"
msgstr "$<未定义>"

#: ppc-dis.c:354
#, fuzzy, c-format
msgid "warning: ignoring unknown -M%s option\n"
msgstr "警告：忽略--strip-program 选项，因为-s 选项没有指明"

#: ppc-dis.c:805
#, c-format
msgid ""
"\n"
"The following PPC specific disassembler options are supported for use with\n"
"the -M switch:\n"
msgstr ""
"\n"
"下列 PPC 特定的反汇编器选项在使用 -M 开关时可用（使用逗号分隔多个选项）：\n"

#: ppc-opc.c:992 ppc-opc.c:1015 ppc-opc.c:1040 ppc-opc.c:1069
msgid "invalid register"
msgstr "无效的寄存器"

#: ppc-opc.c:1317 ppc-opc.c:1347
msgid "invalid conditional option"
msgstr "无效的条件选项"

#: ppc-opc.c:1319 ppc-opc.c:1349
#, fuzzy
msgid "invalid counter access"
msgstr "没有访问权限"

#: ppc-opc.c:1351
msgid "attempt to set y bit when using + or - modifier"
msgstr ""

#: ppc-opc.c:1441
msgid "invalid mask field"
msgstr "无效的掩码字段"

#: ppc-opc.c:1464
#, fuzzy
msgid "invalid mfcr mask"
msgstr "无效的掩码字段"

#: ppc-opc.c:1538 ppc-opc.c:1578
#, fuzzy
msgid "illegal L operand value"
msgstr "立即数"

#: ppc-opc.c:1584
msgid "incompatible L operand value"
msgstr ""

#: ppc-opc.c:1628 ppc-opc.c:1663
msgid "illegal bitmask"
msgstr "非法的位掩码"

#: ppc-opc.c:1750
#, fuzzy
msgid "address register in load range"
msgstr "地址中无寄存器"

#: ppc-opc.c:1816
#, fuzzy
msgid "index register in load range"
msgstr "寄存器元素下标"

#: ppc-opc.c:1845 ppc-opc.c:1926
msgid "source and target register operands must be different"
msgstr ""

#: ppc-opc.c:1873
msgid "invalid register operand when updating"
msgstr ""

#: ppc-opc.c:1989
msgid "illegal immediate value"
msgstr "非法的立即数"

#: ppc-opc.c:2136
#, fuzzy
msgid "invalid sprg number"
msgstr "无效的数字。"

#: ppc-opc.c:2173
#, fuzzy
msgid "invalid tbr number"
msgstr "无效的数字。"

#: ppc-opc.c:2317
#, fuzzy
#| msgid "invalid conditional option"
msgid "invalid constant"
msgstr "%<#pragma pack%>中有无效常量 - 已忽略"

#. Invalid option.
#: riscv-dis.c:68
#, fuzzy, c-format
#| msgid "Unrecognised disassembler option: %s\n"
msgid "Unrecognized disassembler option: %s\n"
msgstr "无法识别的反汇编器选项：%s\n"

#: riscv-dis.c:344
#, fuzzy, c-format
#| msgid "# internal error, undefined modifier(%c)"
msgid "# internal error, undefined modifier (%c)"
msgstr "<操作数表中出现内部错误：%s %s>\n"

#: riscv-dis.c:496
#, fuzzy, c-format
#| msgid ""
#| "\n"
#| "The following MIPS specific disassembler options are supported for use\n"
#| "with the -M switch (multiple options should be separated by commas):\n"
msgid ""
"\n"
"The following RISC-V-specific disassembler options are supported for use\n"
"with the -M switch (multiple options should be separated by commas):\n"
msgstr ""
"\n"
"下列 MIPS 特定的反汇编器选项可通过 -M 开关启用（使用逗号分隔多个选项）：\n"

#: riscv-dis.c:500
#, c-format
msgid ""
"\n"
"  numeric       Print numeric reigster names, rather than ABI names.\n"
msgstr ""

#: riscv-dis.c:503
#, c-format
msgid ""
"\n"
"  no-aliases    Disassemble only into canonical instructions, rather\n"
"                than into pseudoinstructions.\n"
msgstr ""

#: s390-dis.c:42
#, fuzzy
#| msgid "  esa         Disassemble in ESA architecture mode\n"
msgid "Disassemble in ESA architecture mode"
msgstr "  esa         在 ESA 架构模式下反汇编\n"

#: s390-dis.c:43
#, fuzzy
msgid "Disassemble in z/Architecture mode"
msgstr "z/Architecture 模式在 %s 上不受支持"

#: s390-dis.c:44
msgid "Print unknown instructions according to length from first two bits"
msgstr ""

#: s390-dis.c:409
#, c-format
msgid ""
"\n"
"The following S/390 specific disassembler options are supported for use\n"
"with the -M switch (multiple options should be separated by commas):\n"
msgstr ""
"\n"
"\n"
"下列 S/390 特定的反汇编器选项可通过 -M 开关启用（使用逗号分隔多个选项）：\n"

#: score-dis.c:663 score-dis.c:870 score-dis.c:1031 score-dis.c:1145
#: score-dis.c:1152 score-dis.c:1159 score7-dis.c:695 score7-dis.c:858
#, fuzzy
#| msgid "<illegal precision>"
msgid "<illegal instruction>"
msgstr "非法操作"

#: sparc-dis.c:309
#, c-format
msgid "Internal error:  bad sparc-opcode.h: \"%s\", %#.8lx, %#.8lx\n"
msgstr "内部错误：错误的 sparc-opcode.h：“%s”，%#.8lx，%#.8lx\n"

#: sparc-dis.c:320
#, c-format
msgid "Internal error: bad sparc-opcode.h: \"%s\", %#.8lx, %#.8lx\n"
msgstr "内部错误：错误的 sparc-opcode.h：“%s”，%#.8lx，%#.8lx\n"

#: sparc-dis.c:379
#, fuzzy, c-format
msgid "Internal error: bad sparc-opcode.h: \"%s\" == \"%s\"\n"
msgstr "内部错误：错误的 sparc-opcode.h：“%s”，%#.8lx，%#.8lx\n"

#. Mark as non-valid instruction.
#: sparc-dis.c:1100
msgid "unknown"
msgstr "未知"

#: v850-dis.c:453
#, fuzzy, c-format
msgid "unknown operand shift: %x\n"
msgstr "<未知>：%x"

#: v850-dis.c:465
#, fuzzy, c-format
#| msgid "unknown pop reg: %d\n"
msgid "unknown reg: %d\n"
msgstr "<未知>：%d"

#. The functions used to insert and extract complicated operands.
#. Note: There is a conspiracy between these functions and
#. v850_insert_operand() in gas/config/tc-v850.c.  Error messages
#. containing the string 'out of range' will be ignored unless a
#. specific command line option is given to GAS.
#: v850-opc.c:53
#, fuzzy
msgid "displacement value is not in range and is not aligned"
msgstr "偏移值越界"

#: v850-opc.c:54
msgid "displacement value is out of range"
msgstr "偏移值越界"

#: v850-opc.c:55
msgid "displacement value is not aligned"
msgstr "偏移值未对齐"

#: v850-opc.c:57
msgid "immediate value is out of range"
msgstr "立即数越界"

#: v850-opc.c:58
msgid "branch value out of range"
msgstr "跳转越界"

#: v850-opc.c:59
msgid "branch value not in range and to odd offset"
msgstr "跳转越界且跳转偏移量为奇数"

#: v850-opc.c:60
msgid "branch to odd offset"
msgstr "跳转偏移量为奇数"

#: v850-opc.c:61
#, fuzzy
#| msgid "immediate value is out of range"
msgid "position value is out of range"
msgstr "立即数越界"

#: v850-opc.c:62
#, fuzzy
#| msgid "immediate value is out of range"
msgid "width value is out of range"
msgstr "立即数越界"

#: v850-opc.c:63
#, fuzzy
#| msgid "value out of range"
msgid "SelID is out of range"
msgstr "SR/SelID 越界"

#: v850-opc.c:64
msgid "vector8 is out of range"
msgstr "vector8 越界"

#: v850-opc.c:65
msgid "vector5 is out of range"
msgstr "vector5 越界"

#: v850-opc.c:66
msgid "imm10 is out of range"
msgstr "imm10 越界"

#: v850-opc.c:67
msgid "SR/SelID is out of range"
msgstr "SR/SelID 越界"

#: v850-opc.c:512
msgid "invalid register for stack adjustment"
msgstr "用于调整堆栈的寄存器无效"

#: v850-opc.c:532
msgid "invalid register name"
msgstr "无效寄存器名"

#: wasm32-dis.c:88
#, fuzzy
#| msgid "invalid register name"
msgid "Disassemble \"register\" names"
msgstr "无效寄存器名"

#: wasm32-dis.c:89
msgid "Name well-known globals"
msgstr ""

#: wasm32-dis.c:503
#, fuzzy, c-format
#| msgid ""
#| "\n"
#| "The following ARM specific disassembler options are supported for use with\n"
#| "the -M switch:\n"
msgid ""
"The following WebAssembly-specific disassembler options are supported for use\n"
"with the -M switch:\n"
msgstr ""
"\n"
"下列 ARM 特定的反汇编器选项可通过 -M 开关启用：\n"

#: xc16x-asm.c:65
msgid "Missing '#' prefix"
msgstr "缺失 '#' 前缀"

#: xc16x-asm.c:81
msgid "Missing '.' prefix"
msgstr "缺失 '.' 前缀"

#: xc16x-asm.c:97
msgid "Missing 'pof:' prefix"
msgstr "缺失 'pof:' 前缀"

#: xc16x-asm.c:113
msgid "Missing 'pag:' prefix"
msgstr "缺失 'pag:' 前缀"

#: xc16x-asm.c:129
msgid "Missing 'sof:' prefix"
msgstr "缺失 'sof:' 前缀"

#: xc16x-asm.c:145
msgid "Missing 'seg:' prefix"
msgstr "缺失 'seg:' 前缀"

#: xstormy16-asm.c:70
msgid "Bad register in preincrement"
msgstr "前置自增中使用了错误的寄存器"

#: xstormy16-asm.c:75
msgid "Bad register in postincrement"
msgstr "后置自增中使用了错误的寄存器"

#: xstormy16-asm.c:77
msgid "Bad register name"
msgstr "错误的寄存器名"

#: xstormy16-asm.c:81
msgid "Label conflicts with register name"
msgstr "标号与寄存器名冲突"

#: xstormy16-asm.c:85
msgid "Label conflicts with `Rx'"
msgstr "标号与‘Rx’冲突"

#: xstormy16-asm.c:87
msgid "Bad immediate expression"
msgstr "错误的立即数表达式"

#: xstormy16-asm.c:108
#, fuzzy
msgid "No relocation for small immediate"
msgstr "立即数"

#: xstormy16-asm.c:118
#, fuzzy
msgid "Small operand was not an immediate number"
msgstr "符号被用作立即操作数"

#: xstormy16-asm.c:156
msgid "Operand is not a symbol"
msgstr "操作数不是一个符号"

#: xstormy16-asm.c:164
msgid "Syntax error: No trailing ')'"
msgstr "语法错误：没有结尾的‘)’"

#, fuzzy
#~ msgid "Illegal limm reference in last instruction!\n"
#~ msgstr "在最后一条指令的非法住参考!"

#, fuzzy
#~ msgid "unable to fit different valued constants into instruction"
#~ msgstr "无法融入教学的不同值的常数"

#, fuzzy
#~ msgid "auxiliary register not allowed here"
#~ msgstr "在这里不允许使用%<#pragma%>"

#, fuzzy
#~ msgid "attempt to set readonly register"
#~ msgstr "不能设置只读属性"

#, fuzzy
#~ msgid "attempt to read writeonly register"
#~ msgstr "尝试读取 writeonly 登记册"

#, fuzzy
#~ msgid "too many long constants"
#~ msgstr "实参太多"

#, fuzzy
#~ msgid "too many shimms in load"
#~ msgstr "重复行过多"

#, fuzzy
#~ msgid "impossible store"
#~ msgstr "STORE"

#, fuzzy
#~ msgid "st operand error"
#~ msgstr ""
#~ "\n"
#~ "错误: ILL_ILLOPN (不合法的算符)"

#, fuzzy
#~ msgid "address writeback not allowed"
#~ msgstr "意外的地址写回"

#, fuzzy
#~ msgid "invalid load/shimm insn"
#~ msgstr "无效指令："

#, fuzzy
#~ msgid "ld operand error"
#~ msgstr ""
#~ "\n"
#~ "错误: ILL_ILLOPN (不合法的算符)"

#, fuzzy
#~ msgid "jump flags, but no .f seen"
#~ msgstr "   -f --as-flags <flags>     把 <flags> 传递给汇编程序。\n"

#, fuzzy
#~ msgid "jump flags, but no limm addr"
#~ msgstr "跳的旗帜，但没有住地址"

#, fuzzy
#~ msgid "flag bits of jump address limm lost"
#~ msgstr "标志位的跳转地址住失去了"

#, fuzzy
#~ msgid "attempt to set HR bits"
#~ msgstr "<无法识别的标志位集合>"

#, fuzzy
#~ msgid "bad jump flags value"
#~ msgstr "错误的ai_flags 值"

#, fuzzy
#~ msgid "branch address not on 4 byte boundary"
#~ msgstr "将函数强行对齐到 4 字节边界上"

#, fuzzy
#~ msgid "must specify .jd or no nullify suffix"
#~ msgstr "必须指定.jd 或无 nullify 后缀"

#~ msgid "unknown\t0x%04x"
#~ msgstr "未知\t0x%04x"

#~ msgid "offset not a multiple of 2"
#~ msgstr "偏移量不是 2 的倍数"

#~ msgid "offset greater than 62"
#~ msgstr "偏移量大于 62"

#~ msgid "offset not a multiple of 4"
#~ msgstr "偏移量不是 4 的倍数"

#~ msgid "offset greater than 124"
#~ msgstr "偏移量大于 124"

#~ msgid "offset not a multiple of 8"
#~ msgstr "偏移量不是 8 的倍数"

#~ msgid "offset greater than 248"
#~ msgstr "偏移量大于 248"

#~ msgid "offset not between -2048 and 2047"
#~ msgstr "偏移量不在 -2048 和 2047 之间"

#~ msgid "offset not between -8192 and 8191"
#~ msgstr "偏移量不在 -8192 和 8191 之间"

#~ msgid "target register operand must be even"
#~ msgstr "目的寄存器操作数必须是偶数"

#~ msgid "source register operand must be even"
#~ msgstr "源寄存器操作数必须是偶数"

#~ msgid "branch value not in range and to an odd offset"
#~ msgstr "跳转越界且跳转偏移量为奇数"

#~ msgid "immediate value not in range and not even"
#~ msgstr "立即数越界且不是偶数"