Commit | Line | Data |
---|---|---|
d5fcd950 MF |
1 | 2011-06-18 Robin Getz <robin.getz@analog.com> |
2 | ||
3 | * bfin-sim.c (decode_dsp32shift_0): Use get_unextended_acc | |
4 | rather than get_extended_acc in LSHIFT insns. | |
5 | ||
a56a1954 MF |
6 | 2011-06-18 Robin Getz <robin.getz@analog.com> |
7 | ||
8 | * bfin-sim.c (decode_macfunc): Handle MM when mmod is M_TFU. | |
9 | Check MM once when mmod is M_FU to match M_TFU better. | |
10 | ||
90e13d65 MF |
11 | 2011-06-18 Robin Getz <robin.getz@analog.com> |
12 | ||
13 | * bfin-sim.c (decode_dsp32shiftimm_0): When shift is greater than | |
14 | 32, perform a left shift. Update the corresponding AV bit. Set | |
15 | AZ when the low 32bits are also zero. | |
16 | ||
99dcc4dc MF |
17 | 2011-06-18 Robin Getz <robin.getz@analog.com> |
18 | ||
19 | * bfin-sim.c (decode_dsp32shiftimm_0): With left shift vector insns, | |
20 | call lshift only when count is positive. Otherwise, call ashiftrt. | |
21 | With arithmetic right shift insns, call ashiftrt when the value is | |
22 | small enough, otherwise call lshift. | |
23 | ||
a0a71a7f MF |
24 | 2011-06-18 Robin Getz <robin.getz@analog.com> |
25 | ||
26 | * bfin-sim.c (extract_mult): Call saturate_s16 directly when | |
27 | mmod is M_IH rather than computing the result by hand. | |
28 | ||
388aa9fe MF |
29 | 2011-06-18 Robin Getz <robin.getz@analog.com> |
30 | ||
31 | * bfin-sim.c (decode_macfunc): Add nosat_acc to track acc value | |
32 | before saturation, set sat when more cases saturate, and set the | |
33 | overflow bit based on these results. For M_TFU, M_IU, M_FU, and | |
34 | M_W32, change the max values compared against. | |
35 | (decode_dsp32mac_0): Delete v_i and add v_0 and v_1. Pass v_1 | |
36 | when processing MAC1 and pass v_0 when processing MAC0. Combine | |
37 | the results into the V/VS ASTAT bits. | |
38 | ||
f2a56d0a MF |
39 | 2011-06-18 Robin Getz <robin.getz@analog.com> |
40 | ||
41 | * bfin-sim.c (extract_mult): Call saturate_s32 when MM is set | |
42 | and mmod is M_IU. Call saturate_s16 when MM is set and mmod | |
43 | is M_TFU. | |
44 | ||
ef26d60e MF |
45 | 2011-06-18 Robin Getz <robin.getz@analog.com> |
46 | ||
47 | * bfin-sim.c (decode_multfunc): Call new is_macmod_signed, and | |
48 | allow MM to sign extend all the time. | |
49 | (decode_macfunc): Likewise. Drop sign extension of unsigned | |
50 | values. | |
51 | ||
73aae8ef MF |
52 | 2011-06-18 Robin Getz <robin.getz@analog.com> |
53 | ||
b02cc5b9 | 54 | * bfin-sim.c (saturate_s40_astat): Change ">=" to ">". |
73aae8ef MF |
55 | (decode_macfunc): Likewise when mmod is M_IH. |
56 | ||
886ea33b MF |
57 | 2011-06-18 Mike Frysinger <vapier@gentoo.org> |
58 | ||
59 | * interp.c (sim_create_inferior): Change free to freeargv. | |
60 | ||
eb324344 MF |
61 | 2011-06-04 Mike Frysinger <vapier@gentoo.org> |
62 | ||
63 | * machs.c (bf534_dev, bf537_dev): Add glue-or devices. | |
64 | (bf537_port): Define applicable devices with PORT to the glue-or | |
65 | devices instead of SIC. | |
66 | (bfin_model_hw_tree_init): Drop old sim_hw_parse call for bfin_sic. | |
67 | Only parse reg/type when the device has an address. Move the call | |
68 | to dv_bfin_hw_port_parse up before slash check. | |
69 | ||
082e1c4a MF |
70 | 2011-06-04 Mike Frysinger <vapier@gentoo.org> |
71 | ||
72 | * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Move above the | |
73 | BFIN_SIC_TO_CEC_PORTS definition. | |
74 | (SIC_PORTS): New define. | |
75 | (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports, | |
76 | bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports, | |
77 | bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports): | |
78 | Delete old layouts. | |
79 | (bfin_sic1_ports, bfin_sic2_ports, bfin_sic3_ports, | |
80 | bfin_sic_561_ports): Define new layouts with SIC_PORTS(). | |
81 | (bfin_sic_finish): Change reference to bfin_sic_50x_ports, | |
82 | bfin_sic_51x_ports, bfin_sic_52x_ports, and bfin_sic_538_ports | |
83 | to bfin_sic2_ports. Change reference to bfin_sic_533_ports, | |
84 | bfin_sic_537_ports, and bfin_sic_59x_ports to bfin_sic1_ports. | |
85 | Change reference to bfin_sic_54x_ports to bfin_sic3_ports. | |
86 | * machs.c (bfin_port_layout): New structure. | |
87 | (bfin_model_data): Add new "port" and "port_count" members. | |
88 | (PORT, SIC): New defines. | |
89 | (bf000_port, bf50x_port, bf51x_port, bf52x_port, bf533_port, | |
90 | bf537_port, bf538_port, bf54x_port, bf561_port, bf592_port): | |
91 | Move and redefine port layout from dv-bfin_sic.c to here. | |
92 | (bf504_port, bf506_port, bf512_port, bf514_port, bf516_port, | |
93 | bf518_port, bf522_port, bf523_port, bf524_port, bf525_port, | |
94 | bf526_port, bf527_port, bf531_port, bf532_port, bf534_port, | |
95 | bf536_port, bf539_port, bf542_port, bf544_port, bf547_port, | |
96 | bf548_port, bf549_port): New defines. | |
97 | (bfin_model_data): Link in new bfin_port_layout.port member. | |
98 | (dv_bfin_hw_port_parse): New function. | |
99 | (dv_bfin_hw_parse): Call new dv_bfin_hw_port_parse function. | |
100 | (bfin_model_hw_tree_init): Replace calls to sim_hw_parse for | |
101 | bfin_sic links with new dv_bfin_hw_port_parse function. | |
102 | ||
36f3e981 MF |
103 | 2011-06-03 Mike Frysinger <vapier@gentoo.org> |
104 | ||
105 | * dv-bfin_dma.c (bfin_dma_io_write_buffer): Fix indentation. | |
106 | ||
ea1f7d4c MF |
107 | 2011-05-25 Mike Frysinger <vapier@gentoo.org> |
108 | ||
109 | * sim-main.h (TRACE_SYSCALL): Change EVENTS to SYSCALL. | |
110 | ||
f2db709f MF |
111 | 2011-05-25 Mike Frysinger <vapier@gentoo.org> |
112 | ||
113 | * dv-bfin_cec.h (BFIN_COREMMR_CEC_{BASE,SIZE}): Move to ... | |
114 | * dv-bfin_ctimer.h (BFIN_COREMMR_CTIMER_{BASE,SIZE}): Move to ... | |
115 | * dv-bfin_dma.h (BFIN_MMR_DMA_SIZE): Move to ... | |
116 | * dv-bfin_dmac.h (BFIN_MMR_DMAC{0,1}_BASE): Move to ... | |
117 | * dv-bfin_ebiu_amc.h (BF{IN,50X,54X}_MMR_EBIU_AMC_SIZE): Move to ... | |
118 | * dv-bfin_ebiu_ddrc.h (BFIN_MMR_EBIU_DDRC_SIZE): Move to ... | |
119 | * dv-bfin_ebiu_sdc.h (BFIN_MMR_EBIU_SDC_SIZE): Move to ... | |
120 | * dv-bfin_emac.h (BFIN_MMR_EMAC_{BASE,SIZE}): Move to ... | |
121 | * dv-bfin_eppi.h (BFIN_MMR_EPPI_SIZE): Move to ... | |
122 | * dv-bfin_evt.h (BFIN_COREMMR_EVT_{BASE,SIZE}): Move to ... | |
123 | * dv-bfin_gpio.h (BFIN_MMR_GPIO_SIZE): Move to ... | |
124 | * dv-bfin_gptimer.h (BFIN_MMR_GPTIMER_SIZE): Move to ... | |
125 | * dv-bfin_jtag.h (BFIN_COREMMR_JTAG_{BASE,SIZE}): Move to ... | |
126 | * dv-bfin_mmu.h (BFIN_COREMMR_MMU_{BASE,SIZE}): Move to ... | |
127 | * dv-bfin_nfc.h (BFIN_MMR_NFC_SIZE): Move to ... | |
128 | * dv-bfin_otp.h (BFIN_MMR_OTP_SIZE): Move to ... | |
129 | * dv-bfin_pfmon.h (BFIN_COREMMR_PFMON_{BASE,SIZE}): Move to ... | |
130 | * dv-bfin_pll.h (BFIN_MMR_PLL_{BASE,SIZE}): Move to ... | |
131 | * dv-bfin_ppi.h (BFIN_MMR_PPI_SIZE): Move to ... | |
132 | * dv-bfin_rtc.h (BFIN_MMR_RTC_SIZE): Move to ... | |
133 | * dv-bfin_sic.h (BFIN_MMR_SIC_{BASE,SIZE}): Move to ... | |
134 | * dv-bfin_spi.h (BFIN_MMR_SPI_SIZE): Move to ... | |
135 | * dv-bfin_trace.h (BFIN_COREMMR_TRACE_{BASE,SIZE}): Move to ... | |
136 | * dv-bfin_twi.h (BFIN_MMR_TWI_SIZE): Move to ... | |
137 | * dv-bfin_uart.h (BFIN_MMR_UART_SIZE): Move to ... | |
138 | * dv-bfin_uart2.h (BFIN_MMR_UART2_SIZE): Move to ... | |
139 | * dv-bfin_wdog.h (BFIN_MMR_WDOG_SIZE): Move to ... | |
140 | * dv-bfin_wp.h (BFIN_COREMMR_WP_{BASE,SIZE}): Move to ... | |
141 | * machs.h: ... here. | |
142 | * machs.c: Delete all dv-bfin_*.h includes except for cec/dmac. | |
143 | ||
c43aadca MF |
144 | 2011-05-25 Mike Frysinger <vapier@gentoo.org> |
145 | ||
146 | * Makefile.in (dv-bfin_pfmon.o): New target. | |
147 | * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_pfmon. | |
148 | * configure: Regenerated. | |
149 | * dv-bfin_pfmon.c, dv-bfin_pfmon.h: New files. | |
150 | * machs.c: Add include new bfin_pfmon.h. | |
151 | (bfin_core_dev): Add pfmon. | |
152 | ||
dfb61fb6 MF |
153 | 2011-05-25 Mike Frysinger <vapier@gentoo.org> |
154 | ||
155 | * machs.c (bf526_roms): Add a region with rev of 2. | |
156 | (bf54x_roms): Add regions with rev of 4. | |
157 | * bfroms/all.h: Include new bf526-0.2.h, bf54x-0.4.h, and | |
158 | bf54x_l1-0.4.h headers. | |
159 | * bfroms/bf526-0.2.h, bfroms/bf54x-0.4.h, bfroms/bf54x_l1-0.4.h: | |
160 | New header files. | |
161 | ||
efac2223 MF |
162 | 2011-05-14 Mike Frysinger <vapier@gentoo.org> |
163 | ||
164 | * bfin-sim.c (decode_PushPopReg_0): Delete (grp == 1 && reg == 6) | |
165 | check for SP reg. | |
166 | ||
28fe96b7 MF |
167 | 2011-05-14 Mike Frysinger <vapier@gentoo.org> |
168 | ||
169 | * dv-bfin_uart.c (bfin_uart_write_byte): Add a mcr arg. Declare a | |
170 | local uart. When LOOP_ENA is set in mcr, write to the saved byte | |
171 | and count fields of the uart. | |
172 | (bfin_uart_io_write_buffer): Pass uart->mcr to bfin_uart_write_byte | |
173 | and bfin_uart_get_next_byte. | |
174 | (bfin_uart_get_next_byte): Add a mcr arg. Move uart->saved_count | |
175 | check first, and skip the remaining code when LOOP_ENA is set in mcr. | |
176 | * dv-bfin_uart.h (bfin_uart_write_byte): Add an mcr argument. | |
177 | (bfin_uart_get_next_byte): Likewise. | |
178 | (XOFF, MRTS, RFIT, RFRT, LOOP_ENA, FCPOL, ARTS, ACTS): Define. | |
179 | * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Padd uart->mcr when | |
180 | calling bfin_uart_write_byte and bfin_uart_get_next_byte. | |
181 | ||
b44f3f63 MF |
182 | 2011-05-09 Mike Frysinger <vapier@gentoo.org> |
183 | ||
184 | * dv-bfin_uart2.c (bfin_uart_io_read_buffer): Clear DR/THRE/TEMT bits | |
185 | from uart->lsr before setting them. | |
186 | ||
2613074f MF |
187 | 2011-04-27 Mike Frysinger <vapier@gentoo.org> |
188 | ||
189 | * dv-bfin_dmac.c (bfin_dmac): Constify pmap array. | |
190 | (bfin_dmac_50x_pmap, bfin_dmac_51x_pmap, bfin_dmac_52x_pmap, | |
191 | bfin_dmac_533_pmap, bfin_dmac_537_pmap, bfin_dmac0_538_pmap, | |
192 | bfin_dmac1_538_pmap, bfin_dmac0_54x_pmap, bfin_dmac1_54x_pmap, | |
193 | bfin_dmac0_561_pmap, bfin_dmac1_561_pmap, bfin_dmac_59x_pmap): | |
194 | Likewise. | |
195 | ||
054c055b MF |
196 | 2011-04-26 Mike Frysinger <vapier@gentoo.org> |
197 | ||
198 | * dv-bfin_gpio.c (bfin_gpio_forward_ouput): New function. | |
199 | (bfin_gpio_io_write_buffer): Store the current port state into | |
200 | "data", and call bfin_gpio_forward_ouput when the data or dir | |
201 | MMRs are updated. | |
202 | (bfin_gpio_ports): Change p0..p15 to bidirect_port. | |
203 | ||
5e0ba1a3 MF |
204 | 2011-04-26 Mike Frysinger <vapier@gentoo.org> |
205 | ||
206 | * dv-bfin_gpio.c (bfin_gpio): Add "int_state" member. | |
207 | (bfin_gpio_forward_int, bfin_gpio_forward_ints): New functions. | |
208 | (bfin_gpio_io_write_buffer): Call bfin_gpio_forward_int when the | |
209 | mask a or mask b MMRs are written. | |
210 | (bfin_gpio_port_event): When handling edge gpios, set the bit in | |
211 | int_state, call bfin_gpio_forward_ints, and then clear the bit. | |
212 | When handling level gpios, clear/set the bit in int_state rather | |
213 | than returning immediately. Call bfin_gpio_forward_ints instead | |
214 | of checking mask[ab] and calling HW_TRACE/hw_port_event directly. | |
215 | ||
0427acfb MF |
216 | 2011-04-16 Mike Frysinger <vapier@gentoo.org> |
217 | ||
218 | * bfin-sim.c (decode_dsp32alu_0): Call STORE instead of SET_DREG for | |
219 | BYTEOP2P, BYTEOP3P, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK, and | |
220 | BYTEUNPACK. | |
221 | (decode_dsp32shift_0): Call STORE instead of SET_DREG for PACK, | |
222 | BITMUX, EXTRACT, DEPOSIT, ALIGN8, ALIGN16, and ALIGN24. | |
223 | ||
d2cfa400 MF |
224 | 2011-04-14 Mike Frysinger <vapier@gentoo.org> |
225 | ||
226 | * bfin-sim.c (decode_dsp32alu_0): Set DIS_ALGN_EXPT when handling | |
227 | BYTEOP2P, BYTEOP3P, SAA, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK, | |
228 | and BYTEUNPACK insns. | |
229 | ||
e10d6db3 MF |
230 | 2011-04-11 Mike Frysinger <vapier@gentoo.org> |
231 | ||
232 | * dv-bfin_sic.c (bfin_sic_port_event): New helper function. | |
233 | (bfin_sic_52x_port_event, bfin_sic_537_port_event, | |
234 | bfin_sic_54x_port_event, bfin_sic_561_port_event): Include level | |
235 | in the trace output, and call the new bfin_sic_port_event func. | |
236 | ||
8aacdaf4 MF |
237 | 2011-04-11 Mike Frysinger <vapier@gentoo.org> |
238 | ||
239 | * dv-bfin_gpio.c (bfin_gpio_ports): Add p15. | |
240 | ||
2b12772f MF |
241 | 2011-04-01 Mike Frysinger <vapier@gentoo.org> |
242 | ||
243 | * dv-bfin_otp.c (bfin_otp_ports): Declare. | |
244 | (bfin_otp_finish): Call set_hw_ports with bfin_otp_ports. | |
245 | ||
6294f8ea MF |
246 | 2011-03-29 Mike Frysinger <vapier@gentoo.org> |
247 | ||
248 | * configure: Regenerate after common/aclocal.m4 changes. | |
249 | ||
1a3af0bf MF |
250 | 2011-03-28 Robin Getz <robin.getz@analog.com> |
251 | ||
252 | * bfin-sim.c (decode_dsp32alu_0): Cast high 16bits of A0.W to bs16 | |
253 | and add to casted low 16bits of A0.L and store in val0. Cast high | |
254 | 16bits of A1.W to bs16 and add to casted low 16bits of A1.L and | |
255 | store in val1. Delete bit checks of val0 and val1. | |
256 | ||
36aef942 MF |
257 | 2011-03-26 Robin Getz <robin.getz@analog.com> |
258 | ||
259 | * bfin-sim.c (decode_dsp32alu_0): Set result to 0x7FFFFFFF when | |
260 | the result was 0x80000000 for RND12 subtraction. | |
261 | ||
fcd1ee07 MF |
262 | 2011-03-26 Robin Getz <robin.getz@analog.com> |
263 | ||
264 | * bfin-sim.c (decode_dsp32alu_0): Set VS when V is set. | |
265 | ||
a31d4fd9 MF |
266 | 2011-03-24 Mike Frysinger <vapier@gentoo.org> |
267 | ||
268 | * dv-bfin_gpio.c (bfin_gpio_port_event): Call HW_TRACE at every | |
269 | major code flow point. | |
270 | * dv-bfin_sic.c (bfin_sic_forward_interrupts): Call HW_TRACE just | |
271 | before calling hw_port_event on ourselves. | |
272 | (bfin_sic_52x_port_event, bfin_sic_537_port_event, | |
273 | bfin_sic_54x_port_event, bfin_sic_561_port_event): Call HW_TRACE | |
274 | at the start of the function. | |
275 | ||
b72cc8e1 MF |
276 | 2011-03-24 Mike Frysinger <vapier@gentoo.org> |
277 | ||
278 | * dv-bfin_gpio.c (bfin_gpio_port_event): Split dir/inen bit checking. | |
279 | Normalize "level" to 0/1 values. Shift "level" over by "my_port". | |
280 | Invert port->both bit check. | |
281 | ||
eaf863cd MF |
282 | 2011-03-24 Mike Frysinger <vapier@gentoo.org> |
283 | ||
284 | * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Subtract 2 from the | |
285 | valuep pointer for clear MMRs, 4 for set MMRs, and 6 for toggle MMRs. | |
286 | ||
b16a1f4c MF |
287 | 2011-03-23 Mike Frysinger <vapier@gentoo.org> |
288 | ||
289 | * TODO: Document some known SIC issues. | |
290 | ||
9922f803 MF |
291 | 2011-03-23 Mike Frysinger <vapier@gentoo.org> |
292 | ||
293 | * devices.h (dv_w1c): Fix typos in documentation of "bits" arg. | |
294 | * dv-bfin_cec.c (bfin_cec_io_write_buffer): Pass 0xffee to dv_w1c_4. | |
295 | * dv-bfin_emac.c (bfin_emac_io_write_buffer): Pass 0xe1 to dv_w1c_4 | |
296 | for systat MMR and -1 to dv_w1c_4 for [rt]x_stky/mmc_[rt]irqs MMRs. | |
297 | * dv-bfin_eppi.c (bfin_eppi_io_write_buffer): Pass 0x1ff to dv_w1c_2. | |
298 | * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Invert bits to dv_w1c_2. | |
299 | * dv-bfin_jtag.c (bfin_jtag_io_write_buffer): Invert bits to dv_w1c_4. | |
300 | * dv-bfin_nfc.c (bfin_nfc_io_write_buffer): Invert bits to dv_w1c_2. | |
301 | * dv-bfin_otp.c (bfin_otp_io_write_buffer): Invert bits to dv_w1c_2. | |
302 | * dv-bfin_ppi.c (bfin_ppi_io_write_buffer): Invert bits to dv_w1c_2. | |
303 | * dv-bfin_rtc.c (bfin_rtc_io_write_buffer): Invert bits to dv_w1c_2. | |
304 | * dv-bfin_spi.c (bfin_spi_io_write_buffer): Invert bits to dv_w1c_2. | |
305 | * dv-bfin_twi.c (bfin_twi_io_write_buffer): Invert bits to dv_w1c_2. | |
306 | * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Invert bits to dv_w1c_2. | |
307 | ||
2d2bab5b MF |
308 | 2011-03-23 Mike Frysinger <vapier@gentoo.org> |
309 | ||
310 | * dv-bfin_uart.h (TFI, BI, FE, PE, OE): Define. | |
311 | ||
972dbc8a MF |
312 | 2011-03-23 Mike Frysinger <vapier@gentoo.org> |
313 | ||
314 | * dv-bfin_twi.h (LOSTARB): Rename from LOSTARG. | |
315 | ||
8e670c0a MF |
316 | 2011-03-23 Robin Getz <robin.getz@analog.com> |
317 | ||
318 | * bfin-sim.c (decode_dsp32shift_0): Set acc0 to the unextended | |
319 | value for the VIT_MAX insn, and mask off the result when done. | |
320 | ||
de0addfb MF |
321 | 2011-03-23 Robin Getz <robin.getz@analog.com> |
322 | ||
323 | * bfin-sim.c (decode_dsp32alu_0): Set A1 to a1_lo when up_hi is false, | |
324 | and set A0 to a0_lo when up_lo is false. | |
325 | ||
beb378a5 MF |
326 | 2011-03-23 Robin Getz <robin.getz@analog.com> |
327 | ||
328 | * bfin-sim.c (decode_dsp32alu_0): Call saturate_s40_astat instead of | |
329 | saturate_s40, and use the v parameter to update the AV bit. Set the | |
330 | AC bit only when the final result is 0. | |
331 | ||
e4a861d1 MF |
332 | 2011-03-23 Mike Frysinger <vapier@gentoo.org> |
333 | ||
334 | * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Define. | |
335 | (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports, | |
336 | bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports, | |
337 | bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports): | |
338 | Encode ids with the ENC macro. | |
339 | (bfin_sic_52x_port_event, bfin_sic_537_port_event, | |
340 | bfin_sic_54x_port_event, bfin_sic_561_port_event): Set idx | |
341 | from my_port with DEC_SIC, and set bit from my_port with DEC_PIN. | |
342 | (bfin_sic_533_port_event): Delete. | |
343 | (bfin_sic_finish): Call set_hw_port_event with | |
344 | bfin_sic_537_port_event for BF533 and BF59x targets. | |
345 | ||
8d8a9746 MF |
346 | 2011-03-23 Robin Getz <robin.getz@analog.com> |
347 | ||
348 | * bfin-sim.c (decode_dsp32alu_0): Drop the src0/src1 check for | |
349 | BYTEOP1P, BYTEOP2P, and BYTEOP3P insns. | |
350 | ||
a9c3ef47 MF |
351 | 2011-03-23 Mike Frysinger <vapier@gentoo.org> |
352 | ||
353 | * machs.c (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev, | |
354 | bf533_dev, bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev): | |
355 | Change bfin_gpio addresses from f/g/h to 5/6/7. | |
356 | (bfin_model_hw_tree_init): Add the bfin_gpio address base to 'a'. | |
357 | ||
9e6584c9 MF |
358 | 2011-03-17 Mike Frysinger <vapier@gentoo.org> |
359 | ||
360 | * configure.ac (AC_CHECK_FUNCS): Check for kill and pread. | |
361 | * configure: Regenerate. | |
362 | * config.in: Regenerate. | |
363 | * interp.c (bfin_syscall): Check for HAVE_{KILL,PREAD} before using | |
364 | kill or pread. | |
365 | ||
b5215db0 MF |
366 | 2011-03-15 Mike Frysinger <vapier@gentoo.org> |
367 | ||
368 | * Makefile.in (dv-bfin_gpio.o): New target. | |
369 | * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_gpio. | |
370 | * configure: Regenerate. | |
371 | * dv-bfin_gpio.c, dv-bfin_gpio.h: New files. | |
372 | * machs.c: Include dv-bfin_gpio.h. | |
373 | (bf50x_mem, bf51x_mem, bf52x_mem, bf531_mem, bf532_mem, bf533_mem, | |
374 | bf534_mem, bf536_mem, bf537_mem, bf538_mem, bf561_mem, bf592_mem): | |
375 | Delete GPIO memory stubs. | |
376 | (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev, bf533_dev, | |
377 | bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev): Add GPIO | |
378 | peripheral devices. | |
379 | (bfin_model_hw_tree_init): Hook up GPIO interrupts to SIC. | |
380 | ||
990d19fd MF |
381 | 2011-03-15 Mike Frysinger <vapier@gentoo.org> |
382 | ||
383 | * bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h, bfroms/bf51x-0.1.h, | |
384 | bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h, bfroms/bf526-0.1.h, | |
385 | bfroms/bf527-0.0.h, bfroms/bf527-0.1.h, bfroms/bf527-0.2.h, | |
386 | bfroms/bf533-0.1.h, bfroms/bf533-0.2.h, bfroms/bf533-0.3.h, | |
387 | bfroms/bf537-0.0.h, bfroms/bf537-0.1.h, bfroms/bf537-0.3.h, | |
388 | bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h, bfroms/bf54x-0.1.h, | |
389 | bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h, bfroms/bf54x_l1-0.1.h, | |
390 | bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h, bfroms/bf59x-0.0.h, | |
391 | bfroms/bf59x_l1-0.1.h, dv-bfin_cec.c, dv-bfin_ctimer.c, | |
392 | dv-bfin_dma.c, dv-bfin_dmac.c, dv-bfin_ebiu_amc.c, | |
393 | dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_sdc.c, dv-bfin_emac.c, | |
394 | dv-bfin_eppi.c, dv-bfin_evt.c, dv-bfin_gptimer.c, dv-bfin_jtag.c, | |
395 | dv-bfin_mmu.c, dv-bfin_nfc.c, dv-bfin_otp.c, dv-bfin_pll.c, | |
396 | dv-bfin_ppi.c, dv-bfin_rtc.c, dv-bfin_sic.c, dv-bfin_spi.c, | |
397 | dv-bfin_trace.c, dv-bfin_twi.c, dv-bfin_uart.c, dv-bfin_uart2.c, | |
398 | dv-bfin_wdog.c, dv-bfin_wp.c, dv-eth_phy.c, gui.c, | |
399 | linux-fixed-code.h, linux-targ-map.h, machs.c, Makefile.in: Fix style. | |
400 | ||
227d2658 MF |
401 | 2011-03-15 Robin Getz <robin.getz@analog.com> |
402 | ||
403 | * bfin-sim.c (decode_dsp32alu_0): Set AZ based on val for 16bit adds | |
404 | and subs. | |
405 | ||
e3809a37 MF |
406 | 2011-03-15 Robin Getz <robin.getz@analog.com> |
407 | ||
408 | * bfin-sim.c (decode_macfunc): Move acc STOREs behind op != 3 check. | |
409 | ||
86d3d8de MF |
410 | 2011-03-15 Robin Getz <robin.getz@analog.com> |
411 | ||
412 | * bfin-sim.c (decode_macfunc): New neg parameter. Set when the | |
413 | high bit is set after extract_mult. | |
414 | (decode_dsp32mac_0): Declare n_1 and n_0. Pass to the decode_macfunc | |
415 | functions. Use these to update the AN bit. | |
416 | ||
9b7509d9 MF |
417 | 2011-03-15 Robin Getz <robin.getz@analog.com> |
418 | ||
419 | * bfin-sim.c (decode_dsp32mult_0): Declare v_i0 and v_i1. Pass to | |
420 | the extract_mult functions. Include these when updating the V, VS, | |
421 | and V_COPY bits. | |
422 | ||
bf416ccd MF |
423 | 2011-03-15 Robin Getz <robin.getz@analog.com> |
424 | ||
425 | * bfin-sim.c (astat_names): New global bit array. | |
426 | (decode_CC2stat_0): Delete local astat_name and astat_names. | |
427 | (decode_psedodbg_assert_0): Move hardcoded offset into a variable. | |
428 | Print out ASTAT bit values when checking an ASTAT register. | |
429 | ||
c9329594 MF |
430 | 2010-03-15 Robin Getz <robin.getz@analog.com> |
431 | ||
432 | * bfin-sim.c (extract_mult): Handle M_IU. | |
433 | ||
f4e33aa6 MF |
434 | 2011-03-05 Mike Frysinger <vapier@gentoo.org> |
435 | ||
436 | * Makefile.in, TODO, aclocal.m4, bfin-sim.c, bfin-sim.h, | |
437 | bfroms/all.h, bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h, | |
438 | bfroms/bf51x-0.1.h, bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h, | |
439 | bfroms/bf526-0.1.h, bfroms/bf527-0.0.h, bfroms/bf527-0.1.h, | |
440 | bfroms/bf527-0.2.h, bfroms/bf533-0.1.h, bfroms/bf533-0.2.h, | |
441 | bfroms/bf533-0.3.h, bfroms/bf537-0.0.h, bfroms/bf537-0.1.h, | |
442 | bfroms/bf537-0.3.h, bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h, | |
443 | bfroms/bf54x-0.1.h, bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h, | |
444 | bfroms/bf54x_l1-0.1.h, bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h, | |
445 | bfroms/bf59x-0.0.h, bfroms/bf59x_l1-0.1.h, config.in, configure, | |
446 | configure.ac, devices.c, devices.h, dv-bfin_cec.c, dv-bfin_cec.h, | |
447 | dv-bfin_ctimer.c, dv-bfin_ctimer.h, dv-bfin_dma.c, dv-bfin_dma.h, | |
448 | dv-bfin_dmac.c, dv-bfin_dmac.h, dv-bfin_ebiu_amc.c, dv-bfin_ebiu_amc.h, | |
449 | dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_ddrc.h, dv-bfin_ebiu_sdc.c, | |
450 | dv-bfin_ebiu_sdc.h, dv-bfin_emac.c, dv-bfin_emac.h, dv-bfin_eppi.c, | |
451 | dv-bfin_eppi.h, dv-bfin_evt.c, dv-bfin_evt.h, dv-bfin_gptimer.c, | |
452 | dv-bfin_gptimer.h, dv-bfin_jtag.c, dv-bfin_jtag.h, dv-bfin_mmu.c, | |
453 | dv-bfin_mmu.h, dv-bfin_nfc.c, dv-bfin_nfc.h, dv-bfin_otp.c, | |
454 | dv-bfin_otp.h, dv-bfin_pll.c, dv-bfin_pll.h, dv-bfin_ppi.c, | |
455 | dv-bfin_ppi.h, dv-bfin_rtc.c, dv-bfin_rtc.h, dv-bfin_sic.c, | |
456 | dv-bfin_sic.h, dv-bfin_spi.c, dv-bfin_spi.h, dv-bfin_trace.c, | |
457 | dv-bfin_trace.h, dv-bfin_twi.c, dv-bfin_twi.h, dv-bfin_uart.c, | |
458 | dv-bfin_uart.h, dv-bfin_uart2.c, dv-bfin_uart2.h, dv-bfin_wdog.c, | |
459 | dv-bfin_wdog.h, dv-bfin_wp.c, dv-bfin_wp.h, dv-eth_phy.c, gui.c, | |
460 | gui.h, insn_list.def, interp.c, linux-fixed-code.h, linux-fixed-code.s, | |
461 | linux-targ-map.h, machs.c, machs.h, proc_list.def, sim-main.h, | |
462 | tconfig.in: New Blackfin port. |