projects / deliverable / binutils-gdb.git / blame
| Commit | Line | Data |
|---|---|---|
| a4a66f71 MF |
1 | 2012-03-31 Mike Frysinger <vapier@gentoo.org> |
| 2 | ||
| 3 | * devices.c: Include devices.h. | |
| 4 | ||
| 2232061b MF |
5 | 2012-03-24 Mike Frysinger <vapier@gentoo.org> |
| 6 | ||
| 7 | * aclocal.m4, config.in, configure: Regenerate. | |
| 8 | ||
| e62bb22a MF |
9 | 2012-03-19 Robin Getz <robin.getz@analog.com> |
| 10 | Mike Frysinger <vapier@gentoo.org> | |
| 11 | ||
| 12 | * bfin-sim.c (lshift): Add an overflow flag. Delete now unused | |
| 13 | i, j, and tmp vars. Add a new v_i var. Split the overflow logic | |
| 14 | out from the saturate logic. Do not set V ASTAT bits when working | |
| 15 | with accumulators. | |
| 16 | (decode_ALU2op_0): Add new argument to lshift call. | |
| 17 | (decode_LOGI2op_0, decode_dsp32shift_0, decode_dsp32shiftimm_0): | |
| 18 | Likewise. | |
| 19 | ||
| 8dbfaed8 MF |
20 | 2012-03-18 Mike Frysinger <vapier@gentoo.org> |
| 21 | ||
| 22 | * dv-bfin_ebiu_amc.c (struct bfin_ebiu_amc): Add bank_base. | |
| 23 | (bfin_ebiu_amc_write_amgctl): Replace BFIN_EBIU_AMC_BASE with | |
| 24 | amc->bank_base. | |
| 25 | (bfin_ebiu_amc_finish): Assign BFIN_EBIU_AMC_BASE to amc->bank_base. | |
| 26 | ||
| 410bbc94 MF |
27 | 2012-03-18 Mike Frysinger <vapier@gentoo.org> |
| 28 | ||
| 29 | * dv-bfin_ebiu_amc.c (bfin_ebiu_amc_attach_address_callback): Use | |
| 30 | ARRAY_SIZE rather than hardcoded constant. | |
| 31 | ||
| 84de2f06 MF |
32 | 2012-02-04 Mike Frysinger <vapier@gentoo.org> |
| 33 | ||
| 34 | * config.in: Regenerate. | |
| 35 | * configure: Likewise. | |
| 36 | * configure.ac: Add linux/types.h to AC_CHECK_HEADERS. | |
| 37 | * dv-eth_phy.c: Check for HAVE_LINUX_TYPES_H, and delete __u16 and | |
| 38 | _LINUX_TYPES_H defines. | |
| 39 | ||
| cc5add8c MF |
40 | 2011-12-03 Mike Frysinger <vapier@gentoo.org> |
| 41 | ||
| 42 | * interp.c (bfin_syscall): Increase _tbuf storage. Declare new local | |
| 43 | tstr buffer. Call cb_get_string on tstr when handling CB_SYS_stat64, | |
| 44 | CB_SYS_lstat64, CB_SYS_open, CB_SYS_write, CB_SYS_unlink, | |
| 45 | CB_SYS_truncate, CB_SYS_rename, CB_SYS_stat, CB_SYS_lstat. Include | |
| 46 | tstr in the tbuf output. | |
| 47 | ||
| db2e4d67 MF |
48 | 2011-12-03 Mike Frysinger <vapier@gentoo.org> |
| 49 | ||
| 50 | * Makefile.in: Delete all dependency rules. | |
| 51 | * aclocal.m4, configure: Regenerate. | |
| 52 | ||
| 4399a56b MF |
53 | 2011-10-19 Mike Frysinger <vapier@gentoo.org> |
| 54 | ||
| 55 | * configure: Regenerate after common/acinclude.m4 update. | |
| 56 | ||
| 9c082ca8 MF |
57 | 2011-10-17 Mike Frysinger <vapier@gentoo.org> |
| 58 | ||
| 59 | * configure.ac: Change include to common/acinclude.m4. | |
| 60 | * aclocal.m4, configure: Regenerate. | |
| 61 | ||
| 6ffe910a MF |
62 | 2011-10-17 Mike Frysinger <vapier@gentoo.org> |
| 63 | ||
| 64 | * configure.ac: Change AC_PREREQ to 2.64. Delete AC_CONFIG_HEADER | |
| 65 | call. Replace common.m4 include with SIM_AC_COMMON. | |
| 66 | * configure: Regenerate. | |
| 67 | ||
| 39c1f96a MF |
68 | 2011-09-28 Mike Frysinger <vapier@gentoo.org> |
| 69 | ||
| 70 | * bfin-sim.c (decode_dsp32shift_0): Use STORE() for VIT_MAX insns. | |
| 71 | ||
| 2419798b MF |
72 | 2011-07-05 Mike Frysinger <vapier@gentoo.org> |
| 73 | ||
| 74 | * interp.c (sim_do_command): Delete. | |
| 75 | ||
| a931db6a MF |
76 | 2011-07-01 Mike Frysinger <vapier@gentoo.org> |
| 77 | ||
| 78 | * interp.c (cb_linux_stat_map_32, cb_linux_stat_map_64): Rename from | |
| 79 | stat_map_32 and stat_map_64. | |
| 80 | (cb_libgloss_stat_map_32): New stat map. | |
| 81 | (stat_map_32, stat_map_64): New stat map pointers. | |
| 82 | (bfin_user_init): Assign stat_map_32 to cb_linux_stat_map_32 and | |
| 83 | stat_map_64 to cb_linux_stat_map_64. | |
| 84 | (bfin_virtual_init): New function. | |
| 85 | (sim_create_inferior): Call bfin_virtual_init for all other envs. | |
| 86 | ||
| ce2486ab MF |
87 | 2011-06-22 Mike Frysinger <vapier@gentoo.org> |
| 88 | ||
| 89 | * interp.c (bfin_syscall): Delete old comment. Set dreg 1 to | |
| 90 | sc.result2 and dreg 2 to sc.errcode. | |
| 91 | ||
| 1f20b145 MF |
92 | 2011-06-18 Robin Getz <robin.getz@analog.com> |
| 93 | ||
| 94 | * bfin-sim.c (decode_dsp32shift_0): Clear ASTAT[AV] if val is 0, | |
| 95 | else set it. Set ASTAT[AVS] if val is 0. Do this for LSHIFT and | |
| 96 | ASHIFT accumulator insns. | |
| 97 | ||
| b4876e04 MF |
98 | 2011-06-18 Robin Getz <robin.getz@analog.com> |
| 99 | ||
| 100 | * bfin-sim.c (ashiftrt): If size is 40, do not call SET_ASTATREG. | |
| 101 | (lshiftrt): Likewise. | |
| 102 | ||
| d5fcd950 MF |
103 | 2011-06-18 Robin Getz <robin.getz@analog.com> |
| 104 | ||
| 105 | * bfin-sim.c (decode_dsp32shift_0): Use get_unextended_acc | |
| 106 | rather than get_extended_acc in LSHIFT insns. | |
| 107 | ||
| a56a1954 MF |
108 | 2011-06-18 Robin Getz <robin.getz@analog.com> |
| 109 | ||
| 110 | * bfin-sim.c (decode_macfunc): Handle MM when mmod is M_TFU. | |
| 111 | Check MM once when mmod is M_FU to match M_TFU better. | |
| 112 | ||
| 90e13d65 MF |
113 | 2011-06-18 Robin Getz <robin.getz@analog.com> |
| 114 | ||
| 115 | * bfin-sim.c (decode_dsp32shiftimm_0): When shift is greater than | |
| 116 | 32, perform a left shift. Update the corresponding AV bit. Set | |
| 117 | AZ when the low 32bits are also zero. | |
| 118 | ||
| 99dcc4dc MF |
119 | 2011-06-18 Robin Getz <robin.getz@analog.com> |
| 120 | ||
| 121 | * bfin-sim.c (decode_dsp32shiftimm_0): With left shift vector insns, | |
| 122 | call lshift only when count is positive. Otherwise, call ashiftrt. | |
| 123 | With arithmetic right shift insns, call ashiftrt when the value is | |
| 124 | small enough, otherwise call lshift. | |
| 125 | ||
| a0a71a7f MF |
126 | 2011-06-18 Robin Getz <robin.getz@analog.com> |
| 127 | ||
| 128 | * bfin-sim.c (extract_mult): Call saturate_s16 directly when | |
| 129 | mmod is M_IH rather than computing the result by hand. | |
| 130 | ||
| 388aa9fe MF |
131 | 2011-06-18 Robin Getz <robin.getz@analog.com> |
| 132 | ||
| 133 | * bfin-sim.c (decode_macfunc): Add nosat_acc to track acc value | |
| 134 | before saturation, set sat when more cases saturate, and set the | |
| 135 | overflow bit based on these results. For M_TFU, M_IU, M_FU, and | |
| 136 | M_W32, change the max values compared against. | |
| 137 | (decode_dsp32mac_0): Delete v_i and add v_0 and v_1. Pass v_1 | |
| 138 | when processing MAC1 and pass v_0 when processing MAC0. Combine | |
| 139 | the results into the V/VS ASTAT bits. | |
| 140 | ||
| f2a56d0a MF |
141 | 2011-06-18 Robin Getz <robin.getz@analog.com> |
| 142 | ||
| 143 | * bfin-sim.c (extract_mult): Call saturate_s32 when MM is set | |
| 144 | and mmod is M_IU. Call saturate_s16 when MM is set and mmod | |
| 145 | is M_TFU. | |
| 146 | ||
| ef26d60e MF |
147 | 2011-06-18 Robin Getz <robin.getz@analog.com> |
| 148 | ||
| 149 | * bfin-sim.c (decode_multfunc): Call new is_macmod_signed, and | |
| 150 | allow MM to sign extend all the time. | |
| 151 | (decode_macfunc): Likewise. Drop sign extension of unsigned | |
| 152 | values. | |
| 153 | ||
| 73aae8ef MF |
154 | 2011-06-18 Robin Getz <robin.getz@analog.com> |
| 155 | ||
| b02cc5b9 | 156 | * bfin-sim.c (saturate_s40_astat): Change ">=" to ">". |
| 73aae8ef MF |
157 | (decode_macfunc): Likewise when mmod is M_IH. |
| 158 | ||
| 886ea33b MF |
159 | 2011-06-18 Mike Frysinger <vapier@gentoo.org> |
| 160 | ||
| 161 | * interp.c (sim_create_inferior): Change free to freeargv. | |
| 162 | ||
| eb324344 MF |
163 | 2011-06-04 Mike Frysinger <vapier@gentoo.org> |
| 164 | ||
| 165 | * machs.c (bf534_dev, bf537_dev): Add glue-or devices. | |
| 166 | (bf537_port): Define applicable devices with PORT to the glue-or | |
| 167 | devices instead of SIC. | |
| 168 | (bfin_model_hw_tree_init): Drop old sim_hw_parse call for bfin_sic. | |
| 169 | Only parse reg/type when the device has an address. Move the call | |
| 170 | to dv_bfin_hw_port_parse up before slash check. | |
| 171 | ||
| 082e1c4a MF |
172 | 2011-06-04 Mike Frysinger <vapier@gentoo.org> |
| 173 | ||
| 174 | * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Move above the | |
| 175 | BFIN_SIC_TO_CEC_PORTS definition. | |
| 176 | (SIC_PORTS): New define. | |
| 177 | (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports, | |
| 178 | bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports, | |
| 179 | bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports): | |
| 180 | Delete old layouts. | |
| 181 | (bfin_sic1_ports, bfin_sic2_ports, bfin_sic3_ports, | |
| 182 | bfin_sic_561_ports): Define new layouts with SIC_PORTS(). | |
| 183 | (bfin_sic_finish): Change reference to bfin_sic_50x_ports, | |
| 184 | bfin_sic_51x_ports, bfin_sic_52x_ports, and bfin_sic_538_ports | |
| 185 | to bfin_sic2_ports. Change reference to bfin_sic_533_ports, | |
| 186 | bfin_sic_537_ports, and bfin_sic_59x_ports to bfin_sic1_ports. | |
| 187 | Change reference to bfin_sic_54x_ports to bfin_sic3_ports. | |
| 188 | * machs.c (bfin_port_layout): New structure. | |
| 189 | (bfin_model_data): Add new "port" and "port_count" members. | |
| 190 | (PORT, SIC): New defines. | |
| 191 | (bf000_port, bf50x_port, bf51x_port, bf52x_port, bf533_port, | |
| 192 | bf537_port, bf538_port, bf54x_port, bf561_port, bf592_port): | |
| 193 | Move and redefine port layout from dv-bfin_sic.c to here. | |
| 194 | (bf504_port, bf506_port, bf512_port, bf514_port, bf516_port, | |
| 195 | bf518_port, bf522_port, bf523_port, bf524_port, bf525_port, | |
| 196 | bf526_port, bf527_port, bf531_port, bf532_port, bf534_port, | |
| 197 | bf536_port, bf539_port, bf542_port, bf544_port, bf547_port, | |
| 198 | bf548_port, bf549_port): New defines. | |
| 199 | (bfin_model_data): Link in new bfin_port_layout.port member. | |
| 200 | (dv_bfin_hw_port_parse): New function. | |
| 201 | (dv_bfin_hw_parse): Call new dv_bfin_hw_port_parse function. | |
| 202 | (bfin_model_hw_tree_init): Replace calls to sim_hw_parse for | |
| 203 | bfin_sic links with new dv_bfin_hw_port_parse function. | |
| 204 | ||
| 36f3e981 MF |
205 | 2011-06-03 Mike Frysinger <vapier@gentoo.org> |
| 206 | ||
| 207 | * dv-bfin_dma.c (bfin_dma_io_write_buffer): Fix indentation. | |
| 208 | ||
| ea1f7d4c MF |
209 | 2011-05-25 Mike Frysinger <vapier@gentoo.org> |
| 210 | ||
| 211 | * sim-main.h (TRACE_SYSCALL): Change EVENTS to SYSCALL. | |
| 212 | ||
| f2db709f MF |
213 | 2011-05-25 Mike Frysinger <vapier@gentoo.org> |
| 214 | ||
| 215 | * dv-bfin_cec.h (BFIN_COREMMR_CEC_{BASE,SIZE}): Move to ... | |
| 216 | * dv-bfin_ctimer.h (BFIN_COREMMR_CTIMER_{BASE,SIZE}): Move to ... | |
| 217 | * dv-bfin_dma.h (BFIN_MMR_DMA_SIZE): Move to ... | |
| 218 | * dv-bfin_dmac.h (BFIN_MMR_DMAC{0,1}_BASE): Move to ... | |
| 219 | * dv-bfin_ebiu_amc.h (BF{IN,50X,54X}_MMR_EBIU_AMC_SIZE): Move to ... | |
| 220 | * dv-bfin_ebiu_ddrc.h (BFIN_MMR_EBIU_DDRC_SIZE): Move to ... | |
| 221 | * dv-bfin_ebiu_sdc.h (BFIN_MMR_EBIU_SDC_SIZE): Move to ... | |
| 222 | * dv-bfin_emac.h (BFIN_MMR_EMAC_{BASE,SIZE}): Move to ... | |
| 223 | * dv-bfin_eppi.h (BFIN_MMR_EPPI_SIZE): Move to ... | |
| 224 | * dv-bfin_evt.h (BFIN_COREMMR_EVT_{BASE,SIZE}): Move to ... | |
| 225 | * dv-bfin_gpio.h (BFIN_MMR_GPIO_SIZE): Move to ... | |
| 226 | * dv-bfin_gptimer.h (BFIN_MMR_GPTIMER_SIZE): Move to ... | |
| 227 | * dv-bfin_jtag.h (BFIN_COREMMR_JTAG_{BASE,SIZE}): Move to ... | |
| 228 | * dv-bfin_mmu.h (BFIN_COREMMR_MMU_{BASE,SIZE}): Move to ... | |
| 229 | * dv-bfin_nfc.h (BFIN_MMR_NFC_SIZE): Move to ... | |
| 230 | * dv-bfin_otp.h (BFIN_MMR_OTP_SIZE): Move to ... | |
| 231 | * dv-bfin_pfmon.h (BFIN_COREMMR_PFMON_{BASE,SIZE}): Move to ... | |
| 232 | * dv-bfin_pll.h (BFIN_MMR_PLL_{BASE,SIZE}): Move to ... | |
| 233 | * dv-bfin_ppi.h (BFIN_MMR_PPI_SIZE): Move to ... | |
| 234 | * dv-bfin_rtc.h (BFIN_MMR_RTC_SIZE): Move to ... | |
| 235 | * dv-bfin_sic.h (BFIN_MMR_SIC_{BASE,SIZE}): Move to ... | |
| 236 | * dv-bfin_spi.h (BFIN_MMR_SPI_SIZE): Move to ... | |
| 237 | * dv-bfin_trace.h (BFIN_COREMMR_TRACE_{BASE,SIZE}): Move to ... | |
| 238 | * dv-bfin_twi.h (BFIN_MMR_TWI_SIZE): Move to ... | |
| 239 | * dv-bfin_uart.h (BFIN_MMR_UART_SIZE): Move to ... | |
| 240 | * dv-bfin_uart2.h (BFIN_MMR_UART2_SIZE): Move to ... | |
| 241 | * dv-bfin_wdog.h (BFIN_MMR_WDOG_SIZE): Move to ... | |
| 242 | * dv-bfin_wp.h (BFIN_COREMMR_WP_{BASE,SIZE}): Move to ... | |
| 243 | * machs.h: ... here. | |
| 244 | * machs.c: Delete all dv-bfin_*.h includes except for cec/dmac. | |
| 245 | ||
| c43aadca MF |
246 | 2011-05-25 Mike Frysinger <vapier@gentoo.org> |
| 247 | ||
| 248 | * Makefile.in (dv-bfin_pfmon.o): New target. | |
| 249 | * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_pfmon. | |
| 250 | * configure: Regenerated. | |
| 251 | * dv-bfin_pfmon.c, dv-bfin_pfmon.h: New files. | |
| 252 | * machs.c: Add include new bfin_pfmon.h. | |
| 253 | (bfin_core_dev): Add pfmon. | |
| 254 | ||
| dfb61fb6 MF |
255 | 2011-05-25 Mike Frysinger <vapier@gentoo.org> |
| 256 | ||
| 257 | * machs.c (bf526_roms): Add a region with rev of 2. | |
| 258 | (bf54x_roms): Add regions with rev of 4. | |
| 259 | * bfroms/all.h: Include new bf526-0.2.h, bf54x-0.4.h, and | |
| 260 | bf54x_l1-0.4.h headers. | |
| 261 | * bfroms/bf526-0.2.h, bfroms/bf54x-0.4.h, bfroms/bf54x_l1-0.4.h: | |
| 262 | New header files. | |
| 263 | ||
| efac2223 MF |
264 | 2011-05-14 Mike Frysinger <vapier@gentoo.org> |
| 265 | ||
| 266 | * bfin-sim.c (decode_PushPopReg_0): Delete (grp == 1 && reg == 6) | |
| 267 | check for SP reg. | |
| 268 | ||
| 28fe96b7 MF |
269 | 2011-05-14 Mike Frysinger <vapier@gentoo.org> |
| 270 | ||
| 271 | * dv-bfin_uart.c (bfin_uart_write_byte): Add a mcr arg. Declare a | |
| 272 | local uart. When LOOP_ENA is set in mcr, write to the saved byte | |
| 273 | and count fields of the uart. | |
| 274 | (bfin_uart_io_write_buffer): Pass uart->mcr to bfin_uart_write_byte | |
| 275 | and bfin_uart_get_next_byte. | |
| 276 | (bfin_uart_get_next_byte): Add a mcr arg. Move uart->saved_count | |
| 277 | check first, and skip the remaining code when LOOP_ENA is set in mcr. | |
| 278 | * dv-bfin_uart.h (bfin_uart_write_byte): Add an mcr argument. | |
| 279 | (bfin_uart_get_next_byte): Likewise. | |
| 280 | (XOFF, MRTS, RFIT, RFRT, LOOP_ENA, FCPOL, ARTS, ACTS): Define. | |
| 281 | * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Padd uart->mcr when | |
| 282 | calling bfin_uart_write_byte and bfin_uart_get_next_byte. | |
| 283 | ||
| b44f3f63 MF |
284 | 2011-05-09 Mike Frysinger <vapier@gentoo.org> |
| 285 | ||
| 286 | * dv-bfin_uart2.c (bfin_uart_io_read_buffer): Clear DR/THRE/TEMT bits | |
| 287 | from uart->lsr before setting them. | |
| 288 | ||
| 2613074f MF |
289 | 2011-04-27 Mike Frysinger <vapier@gentoo.org> |
| 290 | ||
| 291 | * dv-bfin_dmac.c (bfin_dmac): Constify pmap array. | |
| 292 | (bfin_dmac_50x_pmap, bfin_dmac_51x_pmap, bfin_dmac_52x_pmap, | |
| 293 | bfin_dmac_533_pmap, bfin_dmac_537_pmap, bfin_dmac0_538_pmap, | |
| 294 | bfin_dmac1_538_pmap, bfin_dmac0_54x_pmap, bfin_dmac1_54x_pmap, | |
| 295 | bfin_dmac0_561_pmap, bfin_dmac1_561_pmap, bfin_dmac_59x_pmap): | |
| 296 | Likewise. | |
| 297 | ||
| 054c055b MF |
298 | 2011-04-26 Mike Frysinger <vapier@gentoo.org> |
| 299 | ||
| 300 | * dv-bfin_gpio.c (bfin_gpio_forward_ouput): New function. | |
| 301 | (bfin_gpio_io_write_buffer): Store the current port state into | |
| 302 | "data", and call bfin_gpio_forward_ouput when the data or dir | |
| 303 | MMRs are updated. | |
| 304 | (bfin_gpio_ports): Change p0..p15 to bidirect_port. | |
| 305 | ||
| 5e0ba1a3 MF |
306 | 2011-04-26 Mike Frysinger <vapier@gentoo.org> |
| 307 | ||
| 308 | * dv-bfin_gpio.c (bfin_gpio): Add "int_state" member. | |
| 309 | (bfin_gpio_forward_int, bfin_gpio_forward_ints): New functions. | |
| 310 | (bfin_gpio_io_write_buffer): Call bfin_gpio_forward_int when the | |
| 311 | mask a or mask b MMRs are written. | |
| 312 | (bfin_gpio_port_event): When handling edge gpios, set the bit in | |
| 313 | int_state, call bfin_gpio_forward_ints, and then clear the bit. | |
| 314 | When handling level gpios, clear/set the bit in int_state rather | |
| 315 | than returning immediately. Call bfin_gpio_forward_ints instead | |
| 316 | of checking mask[ab] and calling HW_TRACE/hw_port_event directly. | |
| 317 | ||
| 0427acfb MF |
318 | 2011-04-16 Mike Frysinger <vapier@gentoo.org> |
| 319 | ||
| 320 | * bfin-sim.c (decode_dsp32alu_0): Call STORE instead of SET_DREG for | |
| 321 | BYTEOP2P, BYTEOP3P, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK, and | |
| 322 | BYTEUNPACK. | |
| 323 | (decode_dsp32shift_0): Call STORE instead of SET_DREG for PACK, | |
| 324 | BITMUX, EXTRACT, DEPOSIT, ALIGN8, ALIGN16, and ALIGN24. | |
| 325 | ||
| d2cfa400 MF |
326 | 2011-04-14 Mike Frysinger <vapier@gentoo.org> |
| 327 | ||
| 328 | * bfin-sim.c (decode_dsp32alu_0): Set DIS_ALGN_EXPT when handling | |
| 329 | BYTEOP2P, BYTEOP3P, SAA, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK, | |
| 330 | and BYTEUNPACK insns. | |
| 331 | ||
| e10d6db3 MF |
332 | 2011-04-11 Mike Frysinger <vapier@gentoo.org> |
| 333 | ||
| 334 | * dv-bfin_sic.c (bfin_sic_port_event): New helper function. | |
| 335 | (bfin_sic_52x_port_event, bfin_sic_537_port_event, | |
| 336 | bfin_sic_54x_port_event, bfin_sic_561_port_event): Include level | |
| 337 | in the trace output, and call the new bfin_sic_port_event func. | |
| 338 | ||
| 8aacdaf4 MF |
339 | 2011-04-11 Mike Frysinger <vapier@gentoo.org> |
| 340 | ||
| 341 | * dv-bfin_gpio.c (bfin_gpio_ports): Add p15. | |
| 342 | ||
| 2b12772f MF |
343 | 2011-04-01 Mike Frysinger <vapier@gentoo.org> |
| 344 | ||
| 345 | * dv-bfin_otp.c (bfin_otp_ports): Declare. | |
| 346 | (bfin_otp_finish): Call set_hw_ports with bfin_otp_ports. | |
| 347 | ||
| 6294f8ea MF |
348 | 2011-03-29 Mike Frysinger <vapier@gentoo.org> |
| 349 | ||
| 350 | * configure: Regenerate after common/aclocal.m4 changes. | |
| 351 | ||
| 1a3af0bf MF |
352 | 2011-03-28 Robin Getz <robin.getz@analog.com> |
| 353 | ||
| 354 | * bfin-sim.c (decode_dsp32alu_0): Cast high 16bits of A0.W to bs16 | |
| 355 | and add to casted low 16bits of A0.L and store in val0. Cast high | |
| 356 | 16bits of A1.W to bs16 and add to casted low 16bits of A1.L and | |
| 357 | store in val1. Delete bit checks of val0 and val1. | |
| 358 | ||
| 36aef942 MF |
359 | 2011-03-26 Robin Getz <robin.getz@analog.com> |
| 360 | ||
| 361 | * bfin-sim.c (decode_dsp32alu_0): Set result to 0x7FFFFFFF when | |
| 362 | the result was 0x80000000 for RND12 subtraction. | |
| 363 | ||
| fcd1ee07 MF |
364 | 2011-03-26 Robin Getz <robin.getz@analog.com> |
| 365 | ||
| 366 | * bfin-sim.c (decode_dsp32alu_0): Set VS when V is set. | |
| 367 | ||
| a31d4fd9 MF |
368 | 2011-03-24 Mike Frysinger <vapier@gentoo.org> |
| 369 | ||
| 370 | * dv-bfin_gpio.c (bfin_gpio_port_event): Call HW_TRACE at every | |
| 371 | major code flow point. | |
| 372 | * dv-bfin_sic.c (bfin_sic_forward_interrupts): Call HW_TRACE just | |
| 373 | before calling hw_port_event on ourselves. | |
| 374 | (bfin_sic_52x_port_event, bfin_sic_537_port_event, | |
| 375 | bfin_sic_54x_port_event, bfin_sic_561_port_event): Call HW_TRACE | |
| 376 | at the start of the function. | |
| 377 | ||
| b72cc8e1 MF |
378 | 2011-03-24 Mike Frysinger <vapier@gentoo.org> |
| 379 | ||
| 380 | * dv-bfin_gpio.c (bfin_gpio_port_event): Split dir/inen bit checking. | |
| 381 | Normalize "level" to 0/1 values. Shift "level" over by "my_port". | |
| 382 | Invert port->both bit check. | |
| 383 | ||
| eaf863cd MF |
384 | 2011-03-24 Mike Frysinger <vapier@gentoo.org> |
| 385 | ||
| 386 | * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Subtract 2 from the | |
| 387 | valuep pointer for clear MMRs, 4 for set MMRs, and 6 for toggle MMRs. | |
| 388 | ||
| b16a1f4c MF |
389 | 2011-03-23 Mike Frysinger <vapier@gentoo.org> |
| 390 | ||
| 391 | * TODO: Document some known SIC issues. | |
| 392 | ||
| 9922f803 MF |
393 | 2011-03-23 Mike Frysinger <vapier@gentoo.org> |
| 394 | ||
| 395 | * devices.h (dv_w1c): Fix typos in documentation of "bits" arg. | |
| 396 | * dv-bfin_cec.c (bfin_cec_io_write_buffer): Pass 0xffee to dv_w1c_4. | |
| 397 | * dv-bfin_emac.c (bfin_emac_io_write_buffer): Pass 0xe1 to dv_w1c_4 | |
| 398 | for systat MMR and -1 to dv_w1c_4 for [rt]x_stky/mmc_[rt]irqs MMRs. | |
| 399 | * dv-bfin_eppi.c (bfin_eppi_io_write_buffer): Pass 0x1ff to dv_w1c_2. | |
| 400 | * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Invert bits to dv_w1c_2. | |
| 401 | * dv-bfin_jtag.c (bfin_jtag_io_write_buffer): Invert bits to dv_w1c_4. | |
| 402 | * dv-bfin_nfc.c (bfin_nfc_io_write_buffer): Invert bits to dv_w1c_2. | |
| 403 | * dv-bfin_otp.c (bfin_otp_io_write_buffer): Invert bits to dv_w1c_2. | |
| 404 | * dv-bfin_ppi.c (bfin_ppi_io_write_buffer): Invert bits to dv_w1c_2. | |
| 405 | * dv-bfin_rtc.c (bfin_rtc_io_write_buffer): Invert bits to dv_w1c_2. | |
| 406 | * dv-bfin_spi.c (bfin_spi_io_write_buffer): Invert bits to dv_w1c_2. | |
| 407 | * dv-bfin_twi.c (bfin_twi_io_write_buffer): Invert bits to dv_w1c_2. | |
| 408 | * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Invert bits to dv_w1c_2. | |
| 409 | ||
| 2d2bab5b MF |
410 | 2011-03-23 Mike Frysinger <vapier@gentoo.org> |
| 411 | ||
| 412 | * dv-bfin_uart.h (TFI, BI, FE, PE, OE): Define. | |
| 413 | ||
| 972dbc8a MF |
414 | 2011-03-23 Mike Frysinger <vapier@gentoo.org> |
| 415 | ||
| 416 | * dv-bfin_twi.h (LOSTARB): Rename from LOSTARG. | |
| 417 | ||
| 8e670c0a MF |
418 | 2011-03-23 Robin Getz <robin.getz@analog.com> |
| 419 | ||
| 420 | * bfin-sim.c (decode_dsp32shift_0): Set acc0 to the unextended | |
| 421 | value for the VIT_MAX insn, and mask off the result when done. | |
| 422 | ||
| de0addfb MF |
423 | 2011-03-23 Robin Getz <robin.getz@analog.com> |
| 424 | ||
| 425 | * bfin-sim.c (decode_dsp32alu_0): Set A1 to a1_lo when up_hi is false, | |
| 426 | and set A0 to a0_lo when up_lo is false. | |
| 427 | ||
| beb378a5 MF |
428 | 2011-03-23 Robin Getz <robin.getz@analog.com> |
| 429 | ||
| 430 | * bfin-sim.c (decode_dsp32alu_0): Call saturate_s40_astat instead of | |
| 431 | saturate_s40, and use the v parameter to update the AV bit. Set the | |
| 432 | AC bit only when the final result is 0. | |
| 433 | ||
| e4a861d1 MF |
434 | 2011-03-23 Mike Frysinger <vapier@gentoo.org> |
| 435 | ||
| 436 | * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Define. | |
| 437 | (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports, | |
| 438 | bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports, | |
| 439 | bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports): | |
| 440 | Encode ids with the ENC macro. | |
| 441 | (bfin_sic_52x_port_event, bfin_sic_537_port_event, | |
| 442 | bfin_sic_54x_port_event, bfin_sic_561_port_event): Set idx | |
| 443 | from my_port with DEC_SIC, and set bit from my_port with DEC_PIN. | |
| 444 | (bfin_sic_533_port_event): Delete. | |
| 445 | (bfin_sic_finish): Call set_hw_port_event with | |
| 446 | bfin_sic_537_port_event for BF533 and BF59x targets. | |
| 447 | ||
| 8d8a9746 MF |
448 | 2011-03-23 Robin Getz <robin.getz@analog.com> |
| 449 | ||
| 450 | * bfin-sim.c (decode_dsp32alu_0): Drop the src0/src1 check for | |
| 451 | BYTEOP1P, BYTEOP2P, and BYTEOP3P insns. | |
| 452 | ||
| a9c3ef47 MF |
453 | 2011-03-23 Mike Frysinger <vapier@gentoo.org> |
| 454 | ||
| 455 | * machs.c (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev, | |
| 456 | bf533_dev, bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev): | |
| 457 | Change bfin_gpio addresses from f/g/h to 5/6/7. | |
| 458 | (bfin_model_hw_tree_init): Add the bfin_gpio address base to 'a'. | |
| 459 | ||
| 9e6584c9 MF |
460 | 2011-03-17 Mike Frysinger <vapier@gentoo.org> |
| 461 | ||
| 462 | * configure.ac (AC_CHECK_FUNCS): Check for kill and pread. | |
| 463 | * configure: Regenerate. | |
| 464 | * config.in: Regenerate. | |
| 465 | * interp.c (bfin_syscall): Check for HAVE_{KILL,PREAD} before using | |
| 466 | kill or pread. | |
| 467 | ||
| b5215db0 MF |
468 | 2011-03-15 Mike Frysinger <vapier@gentoo.org> |
| 469 | ||
| 470 | * Makefile.in (dv-bfin_gpio.o): New target. | |
| 471 | * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_gpio. | |
| 472 | * configure: Regenerate. | |
| 473 | * dv-bfin_gpio.c, dv-bfin_gpio.h: New files. | |
| 474 | * machs.c: Include dv-bfin_gpio.h. | |
| 475 | (bf50x_mem, bf51x_mem, bf52x_mem, bf531_mem, bf532_mem, bf533_mem, | |
| 476 | bf534_mem, bf536_mem, bf537_mem, bf538_mem, bf561_mem, bf592_mem): | |
| 477 | Delete GPIO memory stubs. | |
| 478 | (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev, bf533_dev, | |
| 479 | bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev): Add GPIO | |
| 480 | peripheral devices. | |
| 481 | (bfin_model_hw_tree_init): Hook up GPIO interrupts to SIC. | |
| 482 | ||
| 990d19fd MF |
483 | 2011-03-15 Mike Frysinger <vapier@gentoo.org> |
| 484 | ||
| 485 | * bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h, bfroms/bf51x-0.1.h, | |
| 486 | bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h, bfroms/bf526-0.1.h, | |
| 487 | bfroms/bf527-0.0.h, bfroms/bf527-0.1.h, bfroms/bf527-0.2.h, | |
| 488 | bfroms/bf533-0.1.h, bfroms/bf533-0.2.h, bfroms/bf533-0.3.h, | |
| 489 | bfroms/bf537-0.0.h, bfroms/bf537-0.1.h, bfroms/bf537-0.3.h, | |
| 490 | bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h, bfroms/bf54x-0.1.h, | |
| 491 | bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h, bfroms/bf54x_l1-0.1.h, | |
| 492 | bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h, bfroms/bf59x-0.0.h, | |
| 493 | bfroms/bf59x_l1-0.1.h, dv-bfin_cec.c, dv-bfin_ctimer.c, | |
| 494 | dv-bfin_dma.c, dv-bfin_dmac.c, dv-bfin_ebiu_amc.c, | |
| 495 | dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_sdc.c, dv-bfin_emac.c, | |
| 496 | dv-bfin_eppi.c, dv-bfin_evt.c, dv-bfin_gptimer.c, dv-bfin_jtag.c, | |
| 497 | dv-bfin_mmu.c, dv-bfin_nfc.c, dv-bfin_otp.c, dv-bfin_pll.c, | |
| 498 | dv-bfin_ppi.c, dv-bfin_rtc.c, dv-bfin_sic.c, dv-bfin_spi.c, | |
| 499 | dv-bfin_trace.c, dv-bfin_twi.c, dv-bfin_uart.c, dv-bfin_uart2.c, | |
| 500 | dv-bfin_wdog.c, dv-bfin_wp.c, dv-eth_phy.c, gui.c, | |
| 501 | linux-fixed-code.h, linux-targ-map.h, machs.c, Makefile.in: Fix style. | |
| 502 | ||
| 227d2658 MF |
503 | 2011-03-15 Robin Getz <robin.getz@analog.com> |
| 504 | ||
| 505 | * bfin-sim.c (decode_dsp32alu_0): Set AZ based on val for 16bit adds | |
| 506 | and subs. | |
| 507 | ||
| e3809a37 MF |
508 | 2011-03-15 Robin Getz <robin.getz@analog.com> |
| 509 | ||
| 510 | * bfin-sim.c (decode_macfunc): Move acc STOREs behind op != 3 check. | |
| 511 | ||
| 86d3d8de MF |
512 | 2011-03-15 Robin Getz <robin.getz@analog.com> |
| 513 | ||
| 514 | * bfin-sim.c (decode_macfunc): New neg parameter. Set when the | |
| 515 | high bit is set after extract_mult. | |
| 516 | (decode_dsp32mac_0): Declare n_1 and n_0. Pass to the decode_macfunc | |
| 517 | functions. Use these to update the AN bit. | |
| 518 | ||
| 9b7509d9 MF |
519 | 2011-03-15 Robin Getz <robin.getz@analog.com> |
| 520 | ||
| 521 | * bfin-sim.c (decode_dsp32mult_0): Declare v_i0 and v_i1. Pass to | |
| 522 | the extract_mult functions. Include these when updating the V, VS, | |
| 523 | and V_COPY bits. | |
| 524 | ||
| bf416ccd MF |
525 | 2011-03-15 Robin Getz <robin.getz@analog.com> |
| 526 | ||
| 527 | * bfin-sim.c (astat_names): New global bit array. | |
| 528 | (decode_CC2stat_0): Delete local astat_name and astat_names. | |
| 529 | (decode_psedodbg_assert_0): Move hardcoded offset into a variable. | |
| 530 | Print out ASTAT bit values when checking an ASTAT register. | |
| 531 | ||
| c9329594 MF |
532 | 2010-03-15 Robin Getz <robin.getz@analog.com> |
| 533 | ||
| 534 | * bfin-sim.c (extract_mult): Handle M_IU. | |
| 535 | ||
| f4e33aa6 MF |
536 | 2011-03-05 Mike Frysinger <vapier@gentoo.org> |
| 537 | ||
| 538 | * Makefile.in, TODO, aclocal.m4, bfin-sim.c, bfin-sim.h, | |
| 539 | bfroms/all.h, bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h, | |
| 540 | bfroms/bf51x-0.1.h, bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h, | |
| 541 | bfroms/bf526-0.1.h, bfroms/bf527-0.0.h, bfroms/bf527-0.1.h, | |
| 542 | bfroms/bf527-0.2.h, bfroms/bf533-0.1.h, bfroms/bf533-0.2.h, | |
| 543 | bfroms/bf533-0.3.h, bfroms/bf537-0.0.h, bfroms/bf537-0.1.h, | |
| 544 | bfroms/bf537-0.3.h, bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h, | |
| 545 | bfroms/bf54x-0.1.h, bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h, | |
| 546 | bfroms/bf54x_l1-0.1.h, bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h, | |
| 547 | bfroms/bf59x-0.0.h, bfroms/bf59x_l1-0.1.h, config.in, configure, | |
| 548 | configure.ac, devices.c, devices.h, dv-bfin_cec.c, dv-bfin_cec.h, | |
| 549 | dv-bfin_ctimer.c, dv-bfin_ctimer.h, dv-bfin_dma.c, dv-bfin_dma.h, | |
| 550 | dv-bfin_dmac.c, dv-bfin_dmac.h, dv-bfin_ebiu_amc.c, dv-bfin_ebiu_amc.h, | |
| 551 | dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_ddrc.h, dv-bfin_ebiu_sdc.c, | |
| 552 | dv-bfin_ebiu_sdc.h, dv-bfin_emac.c, dv-bfin_emac.h, dv-bfin_eppi.c, | |
| 553 | dv-bfin_eppi.h, dv-bfin_evt.c, dv-bfin_evt.h, dv-bfin_gptimer.c, | |
| 554 | dv-bfin_gptimer.h, dv-bfin_jtag.c, dv-bfin_jtag.h, dv-bfin_mmu.c, | |
| 555 | dv-bfin_mmu.h, dv-bfin_nfc.c, dv-bfin_nfc.h, dv-bfin_otp.c, | |
| 556 | dv-bfin_otp.h, dv-bfin_pll.c, dv-bfin_pll.h, dv-bfin_ppi.c, | |
| 557 | dv-bfin_ppi.h, dv-bfin_rtc.c, dv-bfin_rtc.h, dv-bfin_sic.c, | |
| 558 | dv-bfin_sic.h, dv-bfin_spi.c, dv-bfin_spi.h, dv-bfin_trace.c, | |
| 559 | dv-bfin_trace.h, dv-bfin_twi.c, dv-bfin_twi.h, dv-bfin_uart.c, | |
| 560 | dv-bfin_uart.h, dv-bfin_uart2.c, dv-bfin_uart2.h, dv-bfin_wdog.c, | |
| 561 | dv-bfin_wdog.h, dv-bfin_wp.c, dv-bfin_wp.h, dv-eth_phy.c, gui.c, | |
| 562 | gui.h, insn_list.def, interp.c, linux-fixed-code.h, linux-fixed-code.s, | |
| 563 | linux-targ-map.h, machs.c, machs.h, proc_list.def, sim-main.h, | |
| 564 | tconfig.in: New Blackfin port. |