Commit | Line | Data |
---|---|---|
e10d6db3 MF |
1 | 2011-04-11 Mike Frysinger <vapier@gentoo.org> |
2 | ||
3 | * dv-bfin_sic.c (bfin_sic_port_event): New helper function. | |
4 | (bfin_sic_52x_port_event, bfin_sic_537_port_event, | |
5 | bfin_sic_54x_port_event, bfin_sic_561_port_event): Include level | |
6 | in the trace output, and call the new bfin_sic_port_event func. | |
7 | ||
8aacdaf4 MF |
8 | 2011-04-11 Mike Frysinger <vapier@gentoo.org> |
9 | ||
10 | * dv-bfin_gpio.c (bfin_gpio_ports): Add p15. | |
11 | ||
2b12772f MF |
12 | 2011-04-01 Mike Frysinger <vapier@gentoo.org> |
13 | ||
14 | * dv-bfin_otp.c (bfin_otp_ports): Declare. | |
15 | (bfin_otp_finish): Call set_hw_ports with bfin_otp_ports. | |
16 | ||
6294f8ea MF |
17 | 2011-03-29 Mike Frysinger <vapier@gentoo.org> |
18 | ||
19 | * configure: Regenerate after common/aclocal.m4 changes. | |
20 | ||
1a3af0bf MF |
21 | 2011-03-28 Robin Getz <robin.getz@analog.com> |
22 | ||
23 | * bfin-sim.c (decode_dsp32alu_0): Cast high 16bits of A0.W to bs16 | |
24 | and add to casted low 16bits of A0.L and store in val0. Cast high | |
25 | 16bits of A1.W to bs16 and add to casted low 16bits of A1.L and | |
26 | store in val1. Delete bit checks of val0 and val1. | |
27 | ||
36aef942 MF |
28 | 2011-03-26 Robin Getz <robin.getz@analog.com> |
29 | ||
30 | * bfin-sim.c (decode_dsp32alu_0): Set result to 0x7FFFFFFF when | |
31 | the result was 0x80000000 for RND12 subtraction. | |
32 | ||
fcd1ee07 MF |
33 | 2011-03-26 Robin Getz <robin.getz@analog.com> |
34 | ||
35 | * bfin-sim.c (decode_dsp32alu_0): Set VS when V is set. | |
36 | ||
a31d4fd9 MF |
37 | 2011-03-24 Mike Frysinger <vapier@gentoo.org> |
38 | ||
39 | * dv-bfin_gpio.c (bfin_gpio_port_event): Call HW_TRACE at every | |
40 | major code flow point. | |
41 | * dv-bfin_sic.c (bfin_sic_forward_interrupts): Call HW_TRACE just | |
42 | before calling hw_port_event on ourselves. | |
43 | (bfin_sic_52x_port_event, bfin_sic_537_port_event, | |
44 | bfin_sic_54x_port_event, bfin_sic_561_port_event): Call HW_TRACE | |
45 | at the start of the function. | |
46 | ||
b72cc8e1 MF |
47 | 2011-03-24 Mike Frysinger <vapier@gentoo.org> |
48 | ||
49 | * dv-bfin_gpio.c (bfin_gpio_port_event): Split dir/inen bit checking. | |
50 | Normalize "level" to 0/1 values. Shift "level" over by "my_port". | |
51 | Invert port->both bit check. | |
52 | ||
eaf863cd MF |
53 | 2011-03-24 Mike Frysinger <vapier@gentoo.org> |
54 | ||
55 | * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Subtract 2 from the | |
56 | valuep pointer for clear MMRs, 4 for set MMRs, and 6 for toggle MMRs. | |
57 | ||
b16a1f4c MF |
58 | 2011-03-23 Mike Frysinger <vapier@gentoo.org> |
59 | ||
60 | * TODO: Document some known SIC issues. | |
61 | ||
9922f803 MF |
62 | 2011-03-23 Mike Frysinger <vapier@gentoo.org> |
63 | ||
64 | * devices.h (dv_w1c): Fix typos in documentation of "bits" arg. | |
65 | * dv-bfin_cec.c (bfin_cec_io_write_buffer): Pass 0xffee to dv_w1c_4. | |
66 | * dv-bfin_emac.c (bfin_emac_io_write_buffer): Pass 0xe1 to dv_w1c_4 | |
67 | for systat MMR and -1 to dv_w1c_4 for [rt]x_stky/mmc_[rt]irqs MMRs. | |
68 | * dv-bfin_eppi.c (bfin_eppi_io_write_buffer): Pass 0x1ff to dv_w1c_2. | |
69 | * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Invert bits to dv_w1c_2. | |
70 | * dv-bfin_jtag.c (bfin_jtag_io_write_buffer): Invert bits to dv_w1c_4. | |
71 | * dv-bfin_nfc.c (bfin_nfc_io_write_buffer): Invert bits to dv_w1c_2. | |
72 | * dv-bfin_otp.c (bfin_otp_io_write_buffer): Invert bits to dv_w1c_2. | |
73 | * dv-bfin_ppi.c (bfin_ppi_io_write_buffer): Invert bits to dv_w1c_2. | |
74 | * dv-bfin_rtc.c (bfin_rtc_io_write_buffer): Invert bits to dv_w1c_2. | |
75 | * dv-bfin_spi.c (bfin_spi_io_write_buffer): Invert bits to dv_w1c_2. | |
76 | * dv-bfin_twi.c (bfin_twi_io_write_buffer): Invert bits to dv_w1c_2. | |
77 | * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Invert bits to dv_w1c_2. | |
78 | ||
2d2bab5b MF |
79 | 2011-03-23 Mike Frysinger <vapier@gentoo.org> |
80 | ||
81 | * dv-bfin_uart.h (TFI, BI, FE, PE, OE): Define. | |
82 | ||
972dbc8a MF |
83 | 2011-03-23 Mike Frysinger <vapier@gentoo.org> |
84 | ||
85 | * dv-bfin_twi.h (LOSTARB): Rename from LOSTARG. | |
86 | ||
8e670c0a MF |
87 | 2011-03-23 Robin Getz <robin.getz@analog.com> |
88 | ||
89 | * bfin-sim.c (decode_dsp32shift_0): Set acc0 to the unextended | |
90 | value for the VIT_MAX insn, and mask off the result when done. | |
91 | ||
de0addfb MF |
92 | 2011-03-23 Robin Getz <robin.getz@analog.com> |
93 | ||
94 | * bfin-sim.c (decode_dsp32alu_0): Set A1 to a1_lo when up_hi is false, | |
95 | and set A0 to a0_lo when up_lo is false. | |
96 | ||
beb378a5 MF |
97 | 2011-03-23 Robin Getz <robin.getz@analog.com> |
98 | ||
99 | * bfin-sim.c (decode_dsp32alu_0): Call saturate_s40_astat instead of | |
100 | saturate_s40, and use the v parameter to update the AV bit. Set the | |
101 | AC bit only when the final result is 0. | |
102 | ||
e4a861d1 MF |
103 | 2011-03-23 Mike Frysinger <vapier@gentoo.org> |
104 | ||
105 | * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Define. | |
106 | (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports, | |
107 | bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports, | |
108 | bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports): | |
109 | Encode ids with the ENC macro. | |
110 | (bfin_sic_52x_port_event, bfin_sic_537_port_event, | |
111 | bfin_sic_54x_port_event, bfin_sic_561_port_event): Set idx | |
112 | from my_port with DEC_SIC, and set bit from my_port with DEC_PIN. | |
113 | (bfin_sic_533_port_event): Delete. | |
114 | (bfin_sic_finish): Call set_hw_port_event with | |
115 | bfin_sic_537_port_event for BF533 and BF59x targets. | |
116 | ||
8d8a9746 MF |
117 | 2011-03-23 Robin Getz <robin.getz@analog.com> |
118 | ||
119 | * bfin-sim.c (decode_dsp32alu_0): Drop the src0/src1 check for | |
120 | BYTEOP1P, BYTEOP2P, and BYTEOP3P insns. | |
121 | ||
a9c3ef47 MF |
122 | 2011-03-23 Mike Frysinger <vapier@gentoo.org> |
123 | ||
124 | * machs.c (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev, | |
125 | bf533_dev, bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev): | |
126 | Change bfin_gpio addresses from f/g/h to 5/6/7. | |
127 | (bfin_model_hw_tree_init): Add the bfin_gpio address base to 'a'. | |
128 | ||
9e6584c9 MF |
129 | 2011-03-17 Mike Frysinger <vapier@gentoo.org> |
130 | ||
131 | * configure.ac (AC_CHECK_FUNCS): Check for kill and pread. | |
132 | * configure: Regenerate. | |
133 | * config.in: Regenerate. | |
134 | * interp.c (bfin_syscall): Check for HAVE_{KILL,PREAD} before using | |
135 | kill or pread. | |
136 | ||
b5215db0 MF |
137 | 2011-03-15 Mike Frysinger <vapier@gentoo.org> |
138 | ||
139 | * Makefile.in (dv-bfin_gpio.o): New target. | |
140 | * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_gpio. | |
141 | * configure: Regenerate. | |
142 | * dv-bfin_gpio.c, dv-bfin_gpio.h: New files. | |
143 | * machs.c: Include dv-bfin_gpio.h. | |
144 | (bf50x_mem, bf51x_mem, bf52x_mem, bf531_mem, bf532_mem, bf533_mem, | |
145 | bf534_mem, bf536_mem, bf537_mem, bf538_mem, bf561_mem, bf592_mem): | |
146 | Delete GPIO memory stubs. | |
147 | (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev, bf533_dev, | |
148 | bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev): Add GPIO | |
149 | peripheral devices. | |
150 | (bfin_model_hw_tree_init): Hook up GPIO interrupts to SIC. | |
151 | ||
990d19fd MF |
152 | 2011-03-15 Mike Frysinger <vapier@gentoo.org> |
153 | ||
154 | * bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h, bfroms/bf51x-0.1.h, | |
155 | bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h, bfroms/bf526-0.1.h, | |
156 | bfroms/bf527-0.0.h, bfroms/bf527-0.1.h, bfroms/bf527-0.2.h, | |
157 | bfroms/bf533-0.1.h, bfroms/bf533-0.2.h, bfroms/bf533-0.3.h, | |
158 | bfroms/bf537-0.0.h, bfroms/bf537-0.1.h, bfroms/bf537-0.3.h, | |
159 | bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h, bfroms/bf54x-0.1.h, | |
160 | bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h, bfroms/bf54x_l1-0.1.h, | |
161 | bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h, bfroms/bf59x-0.0.h, | |
162 | bfroms/bf59x_l1-0.1.h, dv-bfin_cec.c, dv-bfin_ctimer.c, | |
163 | dv-bfin_dma.c, dv-bfin_dmac.c, dv-bfin_ebiu_amc.c, | |
164 | dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_sdc.c, dv-bfin_emac.c, | |
165 | dv-bfin_eppi.c, dv-bfin_evt.c, dv-bfin_gptimer.c, dv-bfin_jtag.c, | |
166 | dv-bfin_mmu.c, dv-bfin_nfc.c, dv-bfin_otp.c, dv-bfin_pll.c, | |
167 | dv-bfin_ppi.c, dv-bfin_rtc.c, dv-bfin_sic.c, dv-bfin_spi.c, | |
168 | dv-bfin_trace.c, dv-bfin_twi.c, dv-bfin_uart.c, dv-bfin_uart2.c, | |
169 | dv-bfin_wdog.c, dv-bfin_wp.c, dv-eth_phy.c, gui.c, | |
170 | linux-fixed-code.h, linux-targ-map.h, machs.c, Makefile.in: Fix style. | |
171 | ||
227d2658 MF |
172 | 2011-03-15 Robin Getz <robin.getz@analog.com> |
173 | ||
174 | * bfin-sim.c (decode_dsp32alu_0): Set AZ based on val for 16bit adds | |
175 | and subs. | |
176 | ||
e3809a37 MF |
177 | 2011-03-15 Robin Getz <robin.getz@analog.com> |
178 | ||
179 | * bfin-sim.c (decode_macfunc): Move acc STOREs behind op != 3 check. | |
180 | ||
86d3d8de MF |
181 | 2011-03-15 Robin Getz <robin.getz@analog.com> |
182 | ||
183 | * bfin-sim.c (decode_macfunc): New neg parameter. Set when the | |
184 | high bit is set after extract_mult. | |
185 | (decode_dsp32mac_0): Declare n_1 and n_0. Pass to the decode_macfunc | |
186 | functions. Use these to update the AN bit. | |
187 | ||
9b7509d9 MF |
188 | 2011-03-15 Robin Getz <robin.getz@analog.com> |
189 | ||
190 | * bfin-sim.c (decode_dsp32mult_0): Declare v_i0 and v_i1. Pass to | |
191 | the extract_mult functions. Include these when updating the V, VS, | |
192 | and V_COPY bits. | |
193 | ||
bf416ccd MF |
194 | 2011-03-15 Robin Getz <robin.getz@analog.com> |
195 | ||
196 | * bfin-sim.c (astat_names): New global bit array. | |
197 | (decode_CC2stat_0): Delete local astat_name and astat_names. | |
198 | (decode_psedodbg_assert_0): Move hardcoded offset into a variable. | |
199 | Print out ASTAT bit values when checking an ASTAT register. | |
200 | ||
c9329594 MF |
201 | 2010-03-15 Robin Getz <robin.getz@analog.com> |
202 | ||
203 | * bfin-sim.c (extract_mult): Handle M_IU. | |
204 | ||
f4e33aa6 MF |
205 | 2011-03-05 Mike Frysinger <vapier@gentoo.org> |
206 | ||
207 | * Makefile.in, TODO, aclocal.m4, bfin-sim.c, bfin-sim.h, | |
208 | bfroms/all.h, bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h, | |
209 | bfroms/bf51x-0.1.h, bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h, | |
210 | bfroms/bf526-0.1.h, bfroms/bf527-0.0.h, bfroms/bf527-0.1.h, | |
211 | bfroms/bf527-0.2.h, bfroms/bf533-0.1.h, bfroms/bf533-0.2.h, | |
212 | bfroms/bf533-0.3.h, bfroms/bf537-0.0.h, bfroms/bf537-0.1.h, | |
213 | bfroms/bf537-0.3.h, bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h, | |
214 | bfroms/bf54x-0.1.h, bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h, | |
215 | bfroms/bf54x_l1-0.1.h, bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h, | |
216 | bfroms/bf59x-0.0.h, bfroms/bf59x_l1-0.1.h, config.in, configure, | |
217 | configure.ac, devices.c, devices.h, dv-bfin_cec.c, dv-bfin_cec.h, | |
218 | dv-bfin_ctimer.c, dv-bfin_ctimer.h, dv-bfin_dma.c, dv-bfin_dma.h, | |
219 | dv-bfin_dmac.c, dv-bfin_dmac.h, dv-bfin_ebiu_amc.c, dv-bfin_ebiu_amc.h, | |
220 | dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_ddrc.h, dv-bfin_ebiu_sdc.c, | |
221 | dv-bfin_ebiu_sdc.h, dv-bfin_emac.c, dv-bfin_emac.h, dv-bfin_eppi.c, | |
222 | dv-bfin_eppi.h, dv-bfin_evt.c, dv-bfin_evt.h, dv-bfin_gptimer.c, | |
223 | dv-bfin_gptimer.h, dv-bfin_jtag.c, dv-bfin_jtag.h, dv-bfin_mmu.c, | |
224 | dv-bfin_mmu.h, dv-bfin_nfc.c, dv-bfin_nfc.h, dv-bfin_otp.c, | |
225 | dv-bfin_otp.h, dv-bfin_pll.c, dv-bfin_pll.h, dv-bfin_ppi.c, | |
226 | dv-bfin_ppi.h, dv-bfin_rtc.c, dv-bfin_rtc.h, dv-bfin_sic.c, | |
227 | dv-bfin_sic.h, dv-bfin_spi.c, dv-bfin_spi.h, dv-bfin_trace.c, | |
228 | dv-bfin_trace.h, dv-bfin_twi.c, dv-bfin_twi.h, dv-bfin_uart.c, | |
229 | dv-bfin_uart.h, dv-bfin_uart2.c, dv-bfin_uart2.h, dv-bfin_wdog.c, | |
230 | dv-bfin_wdog.h, dv-bfin_wp.c, dv-bfin_wp.h, dv-eth_phy.c, gui.c, | |
231 | gui.h, insn_list.def, interp.c, linux-fixed-code.h, linux-fixed-code.s, | |
232 | linux-targ-map.h, machs.c, machs.h, proc_list.def, sim-main.h, | |
233 | tconfig.in: New Blackfin port. |