Commit | Line | Data |
---|---|---|
936df756 MF |
1 | 2016-01-09 Mike Frysinger <vapier@gentoo.org> |
2 | ||
3 | * config.in, configure: Regenerate. | |
4 | ||
2e3d4f4d MF |
5 | 2016-01-06 Mike Frysinger <vapier@gentoo.org> |
6 | ||
7 | * interp.c (sim_open): Mark argv const. | |
8 | (sim_create_inferior): Mark argv and env const. | |
9 | ||
13adda68 MF |
10 | 2016-01-04 Mike Frysinger <vapier@gentoo.org> |
11 | ||
12 | * endian.c (get_word): Delete all arch/big endian logic. | |
13 | (get_longword, write_word, write_longword): Likewise. | |
14 | ||
77cf2ef5 MF |
15 | 2016-01-03 Mike Frysinger <vapier@gentoo.org> |
16 | ||
17 | * interp.c (sim_open): Update sim_parse_args comment. | |
18 | ||
0cb8d851 MF |
19 | 2016-01-03 Mike Frysinger <vapier@gentoo.org> |
20 | ||
21 | * configure.ac (SIM_AC_OPTION_HOSTENDIAN): Delete. | |
22 | * configure: Regenerate. | |
23 | ||
1ac72f06 MF |
24 | 2016-01-02 Mike Frysinger <vapier@gentoo.org> |
25 | ||
26 | * configure: Regenerate. | |
27 | ||
e1211e55 MF |
28 | 2015-12-30 Mike Frysinger <vapier@gentoo.org> |
29 | ||
30 | * wrapper.c (d10v_reg_store, d10v_reg_fetch): Define. | |
31 | (sim_open): Call CPU_REG_FETCH/CPU_REG_STORE. | |
32 | (sim_store_register): Rename to ... | |
33 | (d10v_reg_store): ... this. Rename cpu to sd. | |
34 | (sim_fetch_register): Rename to ... | |
35 | (d10v_reg_fetch): ... this. Rename cpu to sd. | |
36 | ||
5e744ef8 MF |
37 | 2015-12-27 Mike Frysinger <vapier@gentoo.org> |
38 | ||
39 | * Makefile.in (SIM_OBJS): Delete sim-hload.o. | |
40 | ||
1b393626 MF |
41 | 2015-12-26 Mike Frysinger <vapier@gentoo.org> |
42 | ||
43 | * config.in, configure: Regenerate. | |
44 | ||
797eee42 MF |
45 | 2015-11-15 Mike Frysinger <vapier@gentoo.org> |
46 | ||
47 | * Makefile.in (SIM_OBJS): Delete sim-reason.o and sim-stop.o. | |
48 | ||
7ea08e8c MF |
49 | 2015-11-15 Mike Frysinger <vapier@gentoo.org> |
50 | ||
51 | * interp.c (sim_open): Delete sim_create_inferior call. | |
52 | ||
e9b0081f MF |
53 | 2015-11-15 Mike Frysinger <vapier@gentoo.org> |
54 | ||
55 | * d10v_sim.h (d10v_callback): Delete. | |
56 | * interp.c (d10v_callback): Delete. | |
57 | (do_long, do_2_short, do_parallel, set_dmap_register, | |
58 | set_imap_register, xfer_mem, dmem_addr, imem_addr, sim_info, | |
59 | sim_create_inferior): Replace d10v_callback->printf_filtered | |
60 | with sim_io_printf. | |
61 | (sim_open): Delete d10v_callback assignment. | |
62 | * simops.c (move_to_cr, trace_input_func, do_trace_output_flush, | |
63 | do_trace_output_finish, trace_output_40, trace_output_32, | |
64 | trace_output_16, trace_output_void, trace_output_flag, OP_5F20, | |
65 | OP_5201, OP_27000000, OP_3220, OP_3400, OP_3000, OP_6C1F, OP_6C01, | |
66 | OP_6E1F, OP_6E01): Replace d10v_callback->printf_filtered with | |
67 | sim_io_printf and d10v_callback->flush_stdout with | |
68 | sim_io_flush_stdout. | |
69 | (OP_5F00): Likewise. Rename d10v_callback to cb. | |
70 | ||
aadc1740 MF |
71 | 2015-11-15 Mike Frysinger <vapier@gentoo.org> |
72 | ||
73 | * Makefile.in (SIM_OBJS): Add sim-reason.o, sim-resume.o, and | |
74 | sim-stop.o. | |
75 | * d10v_sim.h (struct d10v_memory): Delete fault member. | |
76 | (struct _state): Delete exception member. | |
77 | * interp.c (lookup_hash): Call sim_engine_halt instead of setting | |
78 | State.exception. | |
79 | (do_2_short, do_parallel): Delete State.exception checks. | |
80 | (sim_size): Mark static. | |
81 | (map_memory): Call sim_engine_halt instead of returning fault. | |
82 | Call xcalloc instead of calloc and checking the return. | |
83 | (dmem_addr): Call sim_engine_halt when phys_size is 0. | |
84 | (imem_addr): Likewise. | |
85 | (stop_simulator, sim_stop, sim_stop_reason): Delete. | |
86 | (sim_resume): Rename to ... | |
87 | (step_once): ... this. Delete State.exception code and move | |
88 | siggnal checking to sim_engine_run. | |
89 | (sim_engine_run): New function. | |
90 | * simops.c (EXCEPTION): Define. | |
91 | (move_to_cr): Call EXCEPTION instead of setting State.exception. | |
92 | (OP_30000000, OP_6401, OP_6001, OP_6000, OP_32010000, OP_31000000, | |
93 | OP_6601, OP_6201, OP_6200, OP_33010000, OP_5201, OP_27000000, | |
94 | OP_2F000000, OP_3220, OP_3200, OP_3400, OP_3000, OP_34000000, | |
95 | OP_6800, OP_6C1F, OP_6801, OP_6C01, OP_36010000, OP_35000000, | |
96 | OP_6A00, OP_6E1F, OP_6A01, OP_6E01, OP_37010000, OP_5FE0): Likewise. | |
97 | (OP_5F20): Call sim_engine_halt instead of setting State.exception. | |
98 | (OP_5F00): Call sim_engine_halt and EXCEPTION instead of setting | |
99 | State.exception. | |
100 | ||
67954606 MF |
101 | 2015-11-15 Mike Frysinger <vapier@gentoo.org> |
102 | ||
103 | * d10v_sim.h (struct simops): Add SIM_DESC and SIM_CPU to func args. | |
104 | (SET_CREG, SET_HW_CREG, SET_PSW_BIT): Pass sd and cpu to move_to_cr. | |
105 | (dmem_addr, imem_addr, move_to_cr): Add SIM_DESC and SIM_CPU args. | |
106 | (RB, SW, RW, SLW, RLW): Pass sd and cpu to dmem_addr. | |
107 | * endian.c: Change d10v_sim.h include to sim-main.h. | |
108 | * gencode.c: Likewise. Add SIM_DESC and SIM_CPU args to all OPs. | |
109 | * interp.c (lookup_hash, do_long, do_2_short, do_parallel, | |
110 | map_memory, set_dmap_register, dmap_register, set_imap_register, | |
111 | imap_register, sim_d10v_translate_dmap_addr, xfer_mem, | |
112 | sim_d10v_translate_imap_addr, sim_d10v_translate_addr): Add | |
113 | SIM_DESC and SIM_CPU args and adjust all callers. | |
114 | (trace_sd): Delete. | |
115 | (sim_open): Do not assign trace_sd. | |
116 | (sim_resume, sim_create_inferior, sim_fetch_register, | |
117 | sim_store_register): Set up cpu from the first one in sd. | |
118 | * simops.c (move_to_cr): Add SIM_DESC and SIM_CPU args. | |
119 | (trace_input_func, trace_input, do_trace_output_finish, | |
120 | do_trace_output_finish, trace_output_40, trace_output_32, | |
121 | trace_output_16, trace_output_void, trace_output_flag): Add | |
122 | SIM_DESC arg. | |
123 | (trace_input_func): Likewise. Change trace_sd to sd. | |
124 | (OP_*): Add SIM_DESC and SIM_CPU args to all OP funcs. | |
125 | ||
6e4f085c MF |
126 | 2015-11-14 Mike Frysinger <vapier@gentoo.org> |
127 | ||
128 | * interp.c (sim_close): Delete. | |
129 | ||
6637a426 MF |
130 | 2015-11-10 Mike Frysinger <vapier@gentoo.org> |
131 | ||
132 | * interp.c (sim_d10v_translate_dmap_addr): Mark static. | |
133 | (sim_d10v_translate_imap_addr): Likewise. | |
134 | (sim_d10v_translate_addr): Likewise. | |
135 | ||
8d0978fb MF |
136 | 2015-06-23 Mike Frysinger <vapier@gentoo.org> |
137 | ||
138 | * configure: Regenerate. | |
139 | ||
a3487082 MF |
140 | 2015-06-12 Mike Frysinger <vapier@gentoo.org> |
141 | ||
142 | * configure: Regenerate. | |
143 | ||
306f4178 MF |
144 | 2015-06-12 Mike Frysinger <vapier@gentoo.org> |
145 | ||
146 | * configure: Regenerate. | |
147 | ||
20bca71d MF |
148 | 2015-04-18 Mike Frysinger <vapier@gentoo.org> |
149 | ||
150 | * sim-main.h (SIM_CPU): Delete. | |
151 | ||
7e83aa92 MF |
152 | 2015-04-18 Mike Frysinger <vapier@gentoo.org> |
153 | ||
154 | * sim-main.h (sim_cia): Delete. | |
155 | ||
034685f9 MF |
156 | 2015-04-17 Mike Frysinger <vapier@gentoo.org> |
157 | ||
158 | * sim-main.h (CIA_GET, CIA_SET): Delete. | |
159 | ||
27b97b40 MF |
160 | 2015-04-17 Mike Frysinger <vapier@gentoo.org> |
161 | ||
162 | * interp.c (d10v_pc_get, d10v_pc_set): New functions. | |
163 | (sim_open): Declare new local var i. Call CPU_PC_FETCH & | |
164 | CPU_PC_STORE for all cpus. | |
165 | ||
78e9aa70 MF |
166 | 2015-04-15 Mike Frysinger <vapier@gentoo.org> |
167 | ||
168 | * Makefile.in (SIM_OBJS): Delete sim-cpu.o. | |
169 | * sim-main.h (STATE_CPU): Delete. | |
170 | ||
bf12d44e MF |
171 | 2015-04-13 Mike Frysinger <vapier@gentoo.org> |
172 | ||
173 | * configure: Regenerate. | |
174 | ||
122bbfb5 MF |
175 | 2015-04-06 Mike Frysinger <vapier@gentoo.org> |
176 | ||
177 | * Makefile.in (SIM_OBJS): Delete sim-engine.o. | |
178 | ||
b366059a MF |
179 | 2015-04-02 Mike Frysinger <vapier@gentoo.org> |
180 | ||
181 | * interp.c (lookup_hash): Change SIGILL to GDB_SIGNAL_ILL. | |
182 | (sim_resume): Change SIGBUS/SIGSEGV to GDB_SIGNAL_BUS, SIGILL to | |
183 | GDB_SIGNAL_ILL, and SIGTRAP to GDB_SIGNAL_TRAP. | |
184 | ||
0fe84f3f MF |
185 | 2015-04-01 Mike Frysinger <vapier@gentoo.org> |
186 | ||
187 | * interp.c (sim_set_profile, sim_set_profile_size): Delete. | |
188 | ||
b38f7f34 MF |
189 | 2015-03-31 Mike Frysinger <vapier@gentoo.org> |
190 | ||
191 | * Makefile.in (simops.o): New rule. | |
192 | ||
541ebcee MF |
193 | 2015-03-30 Mike Frysinger <vapier@gentoo.org> |
194 | ||
195 | * d10v_sim.h (text, text_start, text_end, prog_bfd): Delete. | |
196 | (SEXT8, SEXT16, SEXT32, MASK32): Undefine. | |
197 | * interp.c: Delete run-sim.h and d10v_sim.h includes. Include | |
198 | sim-main.h and sim-options.h. | |
199 | (myname, sim_kind, init_text_p, prog_bfd_was_opened_p, prog_bfd, | |
200 | text, text_start, text_end, decode_pc, sim_set_profile, | |
201 | sim_set_profile_size, sim_set_trace, sim_set_callbacks, | |
202 | sim_trace, sim_do_command, sim_load): Delete. | |
203 | (INLINE): Delete define. | |
204 | (free_state): New function. | |
205 | (trace_sd): Declare global variable. | |
206 | (sim_open): Rewrite to use new common logic. | |
207 | (sim_close): Delete body. | |
208 | * Makefile.in (SIM_RUN_OBJS, SIM_EXTRA_CFLAGS): Delete. | |
209 | (SIM_OBJS): Change to $(SIM_NEW_COMMON_OBJS). | |
210 | * sim-main.h: New file. | |
211 | * simops.c: Change d10v_sim.h include to sim-main.h. | |
212 | (trace_input_func): Rewrite pc checks to use trace_sd. | |
213 | ||
a87686e5 MF |
214 | 2015-03-30 Mike Frysinger <vapier@gentoo.org> |
215 | ||
216 | * Makefile.in (SIM_EXTRA_CFLAGS): Delete -DNEED_UI_LOOP_HOOK. | |
217 | * interp.c [NEED_UI_LOOP_HOOK] (UI_LOOP_POLL_INTERVAL, | |
218 | ui_loop_hook_counter, deprecated_ui_loop_hook): Delete. | |
219 | (sim_resume) [NEED_UI_LOOP_HOOK]: Delete ui code. | |
220 | ||
11558abc MF |
221 | 2015-03-30 Mike Frysinger <vapier@gentoo.org> |
222 | ||
223 | * Makefile.in (gencode.o, d10v-opc.o): Add $(WARN_CFLAGS). | |
224 | (gencode): Add $(BUILD_LDFLAGS). | |
225 | * endian.c (get_word, get_longword, get_longlong, write_word, | |
226 | write_longword, write_longlong): Convert old style prototypes. | |
227 | * gencode.c: Include string.h. | |
228 | (main): Convert old style prototype. | |
229 | (write_header): Convert old style prototype and fix printf format. | |
230 | (write_template, write_opcodes): Likewise. | |
231 | (check_opcodes): Mark static void. | |
232 | * interp.c: Include inttypes.h and run-sim.h. | |
233 | (hash, lookup_hash, decode_pc, do_long, do_2_short, do_parallel, | |
234 | add_commas, sim_size, sim_write, sim_read, sim_open, sim_close, | |
235 | sim_set_profile, sim_set_profile_size, sim_stop, +sim_resume, | |
236 | sim_info, sim_set_callbacks, sim_stop_reason, sim_fetch_register, | |
237 | sim_store_register, sim_do_command, sim_load): Convert old style | |
238 | prototypes. | |
239 | (sim_create_inferior): Fix pointer cast to use uintptr_t. | |
240 | * simops.c (strrchr): Delete prototype. | |
241 | (trace_input_func): Mark name static. | |
242 | (trace_input_func, trace_output_void, trace_output_flag): Convert old style | |
243 | prototypes. | |
244 | (OP_*): Convert old style prototypes. | |
245 | ||
ef9535c6 MF |
246 | 2015-03-30 Mike Frysinger <vapier@gentoo.org> |
247 | ||
248 | * Makefile.in (interp.o, simops.o, endian.o, table.o): Delete rules. | |
249 | * configure.ac: Call SIM_AC_OPTION_ENDIAN, SIM_AC_OPTION_ALIGNMENT, | |
250 | SIM_AC_OPTION_HOSTENDIAN, SIM_AC_OPTION_ENVIRONMENT, and | |
251 | SIM_AC_OPTION_INLINE. | |
252 | * config.in, configure: Regenerate. | |
253 | * interp.c (sim_trace): Define. | |
254 | ||
ae7d0cac MF |
255 | 2015-03-16 Mike Frysinger <vapier@gentoo.org> |
256 | ||
257 | * config.in, configure: Regenerate. | |
258 | ||
465fb143 MF |
259 | 2015-03-14 Mike Frysinger <vapier@gentoo.org> |
260 | ||
261 | * Makefile.in (SIM_EXTRA_CFLAGS): Add | |
262 | -DSIM_USE_DEPRECATED_RUN_FRONTEND. | |
263 | (SIM_RUN_OBJS): Set to run.o. | |
264 | ||
5cddc23a MF |
265 | 2015-03-14 Mike Frysinger <vapier@gentoo.org> |
266 | ||
267 | * configure.ac (AC_CHECK_HEADERS): Delete. | |
268 | * aclocal.m4, configure: Regenerate. | |
269 | ||
2974be62 AM |
270 | 2014-08-19 Alan Modra <amodra@gmail.com> |
271 | ||
272 | * configure: Regenerate. | |
273 | ||
faa743bb RM |
274 | 2014-08-15 Roland McGrath <mcgrathr@google.com> |
275 | ||
276 | * configure: Regenerate. | |
277 | * config.in: Regenerate. | |
278 | ||
60d847df MF |
279 | 2014-03-10 Mike Frysinger <vapier@gentoo.org> |
280 | ||
281 | * interp.c (sim_do_command): Add const to cmd. | |
282 | ||
b2b255bd MF |
283 | 2014-03-05 Mike Frysinger <vapier@gentoo.org> |
284 | ||
285 | * interp.c (sim_load): Add const to prog. | |
286 | ||
1a8a700e MF |
287 | 2014-03-04 Mike Frysinger <vapier@gentoo.org> |
288 | ||
289 | * configure: Regenerate. | |
290 | ||
bf3d9781 AM |
291 | 2013-09-23 Alan Modra <amodra@gmail.com> |
292 | ||
293 | * configure: Regenerate. | |
294 | ||
31e6ad7d MF |
295 | 2013-06-03 Mike Frysinger <vapier@gentoo.org> |
296 | ||
297 | * aclocal.m4, configure: Regenerate. | |
298 | ||
d3685d60 TT |
299 | 2013-05-10 Freddie Chopin <freddie_chopin@op.pl> |
300 | ||
301 | * configure: Rebuild. | |
302 | ||
d0a5a356 JB |
303 | 2012-06-19 Joel Brobecker <brobecker@adacore.com> |
304 | ||
305 | * interp.c: #include "config.h" instead of "sysdep.h". | |
306 | Add conditional include of string.h or strings.h, as well as | |
307 | conditional include of stdlib.h. | |
308 | ||
5f3ef9d0 JB |
309 | 2012-06-15 Joel Brobecker <brobecker@adacore.com> |
310 | ||
311 | * config.in, configure: Regenerate. | |
312 | ||
a493e3e2 PA |
313 | 2012-05-24 Pedro Alves <palves@redhat.com> |
314 | ||
315 | PR gdb/7205 | |
316 | ||
72f4393d | 317 | Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout. |
a493e3e2 | 318 | |
2232061b MF |
319 | 2012-03-24 Mike Frysinger <vapier@gentoo.org> |
320 | ||
321 | * aclocal.m4, config.in, configure: Regenerate. | |
322 | ||
db2e4d67 MF |
323 | 2011-12-03 Mike Frysinger <vapier@gentoo.org> |
324 | ||
325 | * aclocal.m4: New file. | |
326 | * configure: Regenerate. | |
327 | ||
9c082ca8 MF |
328 | 2011-10-17 Mike Frysinger <vapier@gentoo.org> |
329 | ||
330 | * configure.ac: Change include to common/acinclude.m4. | |
331 | ||
6ffe910a MF |
332 | 2011-10-17 Mike Frysinger <vapier@gentoo.org> |
333 | ||
334 | * configure.ac: Change AC_PREREQ to 2.64. Delete AC_CONFIG_HEADER | |
335 | call. Replace common.m4 include with SIM_AC_COMMON. | |
336 | * configure: Regenerate. | |
337 | ||
5558e7e6 MF |
338 | 2010-04-14 Mike Frysinger <vapier@gentoo.org> |
339 | ||
340 | * interp.c (sim_write): Add const to buffer arg. | |
341 | ||
3725885a RW |
342 | 2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
343 | ||
344 | * configure: Regenerate. | |
345 | ||
d6416cdc RW |
346 | 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
347 | ||
81ecdfbb RW |
348 | * config.in: Regenerate. |
349 | * configure: Likewise. | |
350 | ||
d6416cdc RW |
351 | * configure: Regenerate. |
352 | ||
b5bd9624 HPN |
353 | 2008-07-11 Hans-Peter Nilsson <hp@axis.com> |
354 | ||
355 | * configure: Regenerate to track ../common/common.m4 changes. | |
356 | * config.in: Ditto. | |
357 | ||
6efef468 | 358 | 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> |
72f4393d L |
359 | Daniel Jacobowitz <dan@codesourcery.com> |
360 | Joseph Myers <joseph@codesourcery.com> | |
6efef468 JM |
361 | |
362 | * configure: Regenerate. | |
363 | ||
edc5d9ec HPN |
364 | 2006-12-21 Hans-Peter Nilsson <hp@axis.com> |
365 | ||
366 | * acconfig.h: Remove. | |
367 | * config.in: Regenerate. | |
368 | ||
e85e3205 RE |
369 | 2006-06-13 Richard Earnshaw <rearnsha@arm.com> |
370 | ||
371 | * configure: Regenerated. | |
372 | ||
2f0122dc DJ |
373 | 2006-06-05 Daniel Jacobowitz <dan@codesourcery.com> |
374 | ||
375 | * configure: Regenerated. | |
376 | ||
20e95c23 DJ |
377 | 2006-05-31 Daniel Jacobowitz <dan@codesourcery.com> |
378 | ||
379 | * configure: Regenerated. | |
380 | ||
9517c978 NC |
381 | 2006-04-18 Nick Clifton <nickc@redhat.com> |
382 | ||
383 | * interp.c (sim_stop_reason): Fix typo. | |
384 | ||
aba6488e MM |
385 | 2005-11-28 Mark Mitchell <mark@codesourcery.com> |
386 | ||
387 | * interp.c (gdb/signals.h): Include it. | |
388 | (sim_stop_reason): Use TARGET_SIGNAL_*. | |
389 | ||
2b193c4a MK |
390 | 2005-03-23 Mark Kettenis <kettenis@gnu.org> |
391 | ||
392 | * configure: Regenerate. | |
393 | ||
35695fd6 AC |
394 | 2005-01-14 Andrew Cagney <cagney@gnu.org> |
395 | ||
396 | * configure.ac: Sinclude aclocal.m4 before common.m4. Add | |
397 | explicit call to AC_CONFIG_HEADER. | |
398 | * configure: Regenerate. | |
399 | ||
f0569246 AC |
400 | 2005-01-12 Andrew Cagney <cagney@gnu.org> |
401 | ||
402 | * configure.ac: Update to use ../common/common.m4. | |
403 | * configure: Re-generate. | |
404 | ||
38f48d72 AC |
405 | 2005-01-11 Andrew Cagney <cagney@localhost.localdomain> |
406 | ||
407 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
408 | ||
b7026657 AC |
409 | 2005-01-07 Andrew Cagney <cagney@gnu.org> |
410 | ||
411 | * configure.ac: Rename configure.in, require autoconf 2.59. | |
412 | * configure: Re-generate. | |
413 | ||
379832de HPN |
414 | 2004-12-08 Hans-Peter Nilsson <hp@axis.com> |
415 | ||
416 | * configure: Regenerate for ../common/aclocal.m4 update. | |
417 | ||
0aaa4a81 AC |
418 | 2004-06-28 Andrew Cagney <cagney@gnu.org> |
419 | ||
420 | * interp.c (sim_resume): Rename ui_loop_hook to | |
421 | deprecated_ui_loop_hook. | |
422 | ||
fc0a2244 AC |
423 | 2003-10-30 Andrew Cagney <cagney@redhat.com> |
424 | ||
425 | * simops.c: Replace "struct symbol_cache_entry" with "struct | |
426 | bfd_symbol". | |
427 | ||
ea086965 AC |
428 | 2003-06-22 Andrew Cagney <cagney@redhat.com> |
429 | ||
430 | * interp.c (xfer_mem): Simplify. Only do a single partial | |
431 | transfer. Problem reported by Tom Rix. | |
432 | ||
f6684c31 AC |
433 | 2003-05-07 Andrew Cagney <cagney@redhat.com> |
434 | ||
435 | * interp.c (sim_d10v_translate_addr): Add "regcache" parameter. | |
436 | (sim_d10v_translate_imap_addr): Ditto. | |
437 | (sim_d10v_translate_dmap_addr): Ditto. | |
438 | (xfer_mem): Pass NULL regcache to sim_d10v_translate_addr. | |
439 | (dmem_addr): Pass NULL regcache to sim_d10v_translate_dmap_addr. | |
440 | (dmap_register, imap_register): Add "regcache" parameter. | |
441 | (imem_addr): Pass NULL regcache to sim_d10v_translate_imap_addr. | |
442 | (sim_fetch_register): Pass NULL regcache to imap_register and | |
443 | dmap_register. | |
444 | ||
6b4a8935 AC |
445 | 2003-02-27 Andrew Cagney <cagney@redhat.com> |
446 | ||
447 | * interp.c (sim_open, sim_create_inferior): Rename _bfd to bfd. | |
448 | ||
d25b1553 AC |
449 | 2002-11-13 Andrew Cagney <cagney@redhat.com> |
450 | ||
451 | * simops.c: Include <string.h>. | |
452 | ||
57af9c8b AC |
453 | 2002-06-17 Andrew Cagney <cagney@redhat.com> |
454 | ||
455 | * d10v_sim.h (SET_PSW_BIT): Add cast to avoid inverting an enum. | |
456 | ||
c8cca39f AC |
457 | 2002-06-16 Andrew Cagney <ac131313@redhat.com> |
458 | ||
459 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
460 | ||
3d2957e6 TR |
461 | 2002-06-13 Tom Rix <trix@redhat.com> |
462 | ||
463 | * interp.c (xfer_mem): Fix transfers across multiple segments. | |
72f4393d | 464 | |
3c25f8c7 AC |
465 | 2002-06-09 Andrew Cagney <cagney@redhat.com> |
466 | ||
467 | * Makefile.in (INCLUDE): Update path to callback.h. | |
468 | * gencode.c: Do not include "callback.h". | |
469 | * d10v_sim.h: Include "gdb/callback.h" and "gdb/remote-sim.h". | |
470 | * interp.c: Ditto. | |
471 | ||
983b727e AC |
472 | 2002-06-08 Andrew Cagney <cagney@redhat.com> |
473 | ||
474 | * interp.c (sim_fetch_register): Fix name of enum used in cast. | |
475 | (sim_store_register): Ditto. | |
476 | ||
676ab6a0 | 477 | 2002-06-02 Elena Zannoni <ezannoni@redhat.com> |
c7675842 | 478 | |
72f4393d L |
479 | From Jason Eckhardt <jle@redhat.com> |
480 | * d10v_sim.h (INC_ADDR): Correctly handle the case where MOD_E is | |
481 | less than MOD_S (post-decrement). | |
c7675842 | 482 | |
18c0df9e AC |
483 | 2002-06-01 Andrew Cagney <ac131313@redhat.com> |
484 | ||
485 | * interp.c (sim_fetch_register, sim_store_register): Use a switch | |
486 | statement and enums from "sim-d10v.h". | |
487 | ||
1aa5e64f EZ |
488 | 2002-05-28 Elena Zannoni <ezannoni@redhat.com> |
489 | ||
490 | * interp.c (sim_create_inferior): Add comment. | |
491 | ||
492 | From Alan Matsuoka <alanm@redhat.com>: | |
493 | From 2001-04-27 Jason Eckhardt <jle@cygnus.com>: | |
494 | * simops.c (OP_4400): Output "mvf0f" instead of "mf0f". | |
495 | (OP_4401): Output "mvf0t" instead of "mf0t". | |
496 | (OP_460B): Do not output a flag register. | |
497 | (OP_4609): Do not output a flag register. | |
498 | ||
b91b96f4 AC |
499 | 2002-05-23 Andrew Cagney <ac131313@redhat.com> |
500 | ||
501 | * Makefile.in (INCLUDE): Add "gdb/sim-d10v.h". | |
502 | * interp.c: Include "gdb/sim-d10v.h" instead of "sim-d10v.h". | |
503 | ||
962b3ead JM |
504 | 2001-08-01 John R. Moore <jmoore@redhat.com> |
505 | ||
506 | * interp.c (sim_create_inferior): Removed a hack that stated | |
507 | it was setting r0/r1 with argc/argv. | |
508 | ||
d4424ada C |
509 | 2001-04-15 J.T. Conklin <jtc@redback.com> |
510 | ||
511 | * Makefile.in (simops.o): Add simops.h to dependency list. | |
512 | ||
eb2d80b4 AC |
513 | Tue May 23 21:39:23 2000 Andrew Cagney <cagney@b1.cygnus.com> |
514 | ||
515 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
516 | ||
27842f65 AC |
517 | Tue Apr 18 16:26:41 2000 Andrew Cagney <cagney@b1.cygnus.com> |
518 | ||
519 | * interp.c (sim_resume): Deliver SIGILL. | |
520 | (lookup_hash): Do not print SIGILL message. | |
521 | ||
baa7ae6f AC |
522 | Tue Feb 22 18:24:56 2000 Andrew Cagney <cagney@b1.cygnus.com> |
523 | ||
524 | * Makefile.in (SIM_EXTRA_CFLAGS): Define SIM_HAVE_ENVIRONMENT. | |
525 | * interp.c (sim_set_trace): Replace sim_trace. Enable tracing. | |
526 | ||
ba744a4f AC |
527 | Tue Feb 8 17:41:12 2000 Andrew Cagney <cagney@b1.cygnus.com> |
528 | ||
529 | * d10v_sim.h (SIG_D10V_BUS): Define. | |
530 | ||
531 | * simops.c (address_exception): Delete function. | |
532 | (OP_30000000, OP_6401, OP_6001, OP_6000, OP_32010000, OP_31000000, | |
533 | OP_6601, OP_6201, OP_6200, OP_33010000, OP_34000000, OP_6800, | |
534 | OP_6C1F, OP_6801, OP_6C01, OP_36010000, OP_35000000, OP_6A00, | |
535 | OP_6E1F, OP_6A01, OP_6E01, OP_37010000): Replace call to | |
536 | address_exception with code that sets SIG_D10V_BUS. | |
537 | ||
538 | * interp.c (sim_resume): When SIGBUS or SIGSEGV, deliver a bus | |
539 | error to the simulator before resuming execution. | |
540 | (sim_trace): Check stop reason and use that to determine sim_trace | |
541 | return value. | |
542 | (sim_stop_reason): For SIG_D10V_BUS return a SIGBUS / SIGSEGV | |
543 | sigrc. | |
544 | ||
545 | Tue Jan 18 16:07:42 MST 2000 Diego Novillo <dnovillo@cygnus.com> | |
546 | ||
547 | * interp.c (sim_create_inferior): Change internal initial value for | |
548 | DMAP2 to 0x2000. | |
549 | ||
c3f6f71d JM |
550 | Mon Jan 3 02:06:07 2000 Andrew Cagney <cagney@b1.cygnus.com> |
551 | ||
552 | * interp.c (lookup_hash): Stop the update of the PC when there was | |
553 | an illegal instruction exception. | |
554 | ||
555 | Mon Jan 3 00:14:33 2000 Andrew Cagney <cagney@b1.cygnus.com> | |
556 | ||
557 | * simops.c (address_exception): New function. | |
558 | (OP_30000000, OP_6401, OP_6001, OP_6000, OP_32010000, OP_31000000, | |
559 | OP_6601, OP_6201, OP_6200, OP_33010000, OP_34000000, OP_6800, | |
560 | OP_6C1F, OP_6801, OP_6C01, OP_36010000, OP_35000000, OP_6A00, | |
561 | OP_6E1F, OP_6A01, OP_6E01, OP_37010000): For "ld", "ld2w", "st" | |
562 | and "st2w" check that the address is aligned. | |
563 | ||
8ae7f924 | 564 | 1999-12-30 Chandra Chavva <cchavva@cygnus.com> |
72f4393d | 565 | |
8ae7f924 FCE |
566 | * d10v_sim.h (INC_ADDR): Added code to assign |
567 | proper address for loads with predec operations. | |
568 | ||
c2d11a7d JM |
569 | 1999-11-25 Nick Clifton <nickc@cygnus.com> |
570 | ||
571 | * simops.c (OP_4E0F): New function: Simulate new bit pattern for | |
572 | cpfg instruction. | |
573 | ||
4ce44c66 JM |
574 | Fri Oct 29 18:34:28 1999 Andrew Cagney <cagney@b1.cygnus.com> |
575 | ||
576 | * simops.c (move_to_cr): Don't allow user to set PSW.DM in either | |
577 | DPSW and BPSW. | |
578 | ||
579 | Thu Oct 28 01:26:18 1999 Andrew Cagney <cagney@b1.cygnus.com> | |
580 | ||
581 | * simops.c (OP_5F20): Use SET_HW_PSW when updating PSW. | |
582 | (PSW_HW_MASK): Declare. | |
583 | ||
584 | * d10v_sim.h (move_to_cr): Add ``psw_hw_p'' parameter. | |
585 | (SET_CREG, SET_PSW_BIT): Update. | |
586 | (SET_HW_CREG, SET_HW_PSW): Define. | |
587 | ||
588 | Sun Oct 24 21:38:04 1999 Andrew Cagney <cagney@b1.cygnus.com> | |
589 | ||
590 | * interp.c (sim_d10v_translate_dmap_addr): Fix extraction of IOSP | |
591 | for DMAP3. | |
592 | ||
593 | Sun Oct 24 16:04:16 1999 Andrew Cagney <cagney@b1.cygnus.com> | |
594 | ||
595 | * interp.c (sim_d10v_translate_addr): New function. | |
596 | (xfer_mem): Rewrite. Use sim_d10v_translate_addr. | |
597 | (map_memory): Make INLINE. | |
598 | ||
599 | Sun Oct 24 13:45:19 1999 Andrew Cagney <cagney@b1.cygnus.com> | |
600 | ||
601 | * interp.c (sim_d10v_translate_dmap_addr): New function. | |
602 | (dmem_addr): Rewrite. Use sim_d10v_translate_dmap_addr. Change | |
603 | offset parameter to type uint16. | |
604 | * d10v_sim.h (dmem_addr): Update declaration. | |
605 | ||
606 | Sun Oct 24 13:07:31 1999 Andrew Cagney <cagney@b1.cygnus.com> | |
607 | ||
608 | * interp.c (imap_register, set_imap_register, dmap_register, | |
609 | set_imap_register): Use map_memory. | |
610 | (DMAP): Update. | |
611 | (sim_create_inferior): Initialize all DMAP registers. NOTE that | |
612 | DMAP2, in internal memory mode, is set to 0x0000 and NOT | |
613 | 0x2000. This is consistent with the older d10v boards. | |
614 | ||
615 | Sun Oct 24 11:22:12 1999 Andrew Cagney <cagney@b1.cygnus.com> | |
616 | ||
617 | * interp.c (sim_d10v_translate_imap_addr): New function. | |
618 | (imem_addr): Rewrite. Use sim_d10v_translate_imap_addr. | |
619 | (last_from, last_to): Declare. | |
620 | ||
621 | Sun Oct 24 01:21:56 1999 Andrew Cagney <cagney@b1.cygnus.com> | |
622 | ||
623 | * d10v_sim.h (struct d10v_memory): Define. Support very long | |
624 | memories. | |
625 | (struct _state): Replace imem, dmem and umem by mem. | |
626 | (IMAP_BLOCK_SIZE, DMAP_BLOCK_SIZE, SEGMENT_SIZE, IMEM_SEGMENTS, | |
627 | DMEM_SEGMENTS, UMEM_SEGMENTS): Define. | |
628 | ||
629 | * interp.c (map_memory): New function. | |
630 | (sim_size, xfer_memory, imem_addr, dmem_addr): Update. | |
631 | (UMEM_SEGMENTS): Moveed to "d10v_sim.h". | |
632 | (IMEM_SIZEDMEM_SIZE): Delete. | |
633 | ||
634 | Sat Oct 23 20:06:58 1999 Andrew Cagney <cagney@b1.cygnus.com> | |
635 | ||
636 | * interp.c: Include "sim-d10v.h". | |
637 | (imap_register, set_imap_register, dmap_register, | |
638 | set_dmap_register, spi_register, spu_register, set_spi_register, | |
639 | set_spu_register): New functions. | |
640 | (sim_create_inferior): Update. | |
641 | (sim_fetch_register, sim_store_register): Rewrite. Use enums | |
642 | defined in sim-d10v.h. | |
643 | ||
644 | * d10v_sim.h (DEBUG_MEMORY): Define. | |
645 | (IMAP0, IMAP1, DMAP, SET_IMAP0, SET_IMAP1, SET_DMAP): Delete. | |
72f4393d | 646 | |
4ce44c66 JM |
647 | Sat Oct 23 18:41:18 1999 Andrew Cagney <cagney@b1.cygnus.com> |
648 | ||
649 | * interp.c (sim_open): Allow a debug value to be passed to the -t | |
650 | option. | |
651 | (lookup_hash): Don't exit on an illegal instruction. | |
652 | (do_long, do_2_short, do_parallel): Check for failed instruction | |
653 | lookup. | |
654 | ||
5c44784c JM |
655 | Mon Oct 18 18:03:24 MDT 1999 Diego Novillo <dnovillo@cygnus.com> |
656 | ||
657 | * simops.c (OP_3220): Fix trace output for illegal accumulator | |
4ce44c66 | 658 | message. |
5c44784c | 659 | |
c2c6d25f JM |
660 | 1999-09-14 Nick Clifton <nickc@cygnus.com> |
661 | ||
662 | * simops.c: Disable setting of DM bit in PSW. | |
663 | ||
cff3e48b JM |
664 | Wed Sep 8 19:34:55 MDT 1999 Diego Novillo <dnovillo@cygnus.com> |
665 | ||
666 | * simops.c (op_types): Added new memory indirect type OP_MEMREF3. | |
667 | (trace_input_func): Added support for OP_MEMREF3. | |
668 | (OP_32010000): New instruction ld. | |
669 | (OP_33010000): New instruction ld2w. | |
670 | (OP_5209): New instruction sac. | |
671 | (OP_4209): New instruction sachi. | |
672 | (OP_3220): New instruction slae. | |
673 | (OP_36010000): New instruction st. | |
674 | (OP_37010000): New instruction st2w. | |
675 | ||
676 | 1999-09-09 Stan Shebs <shebs@andros.cygnus.com> | |
677 | ||
678 | * interp.c (old_segment_mapping): New global. | |
679 | (xfer_mem): Change the default segment mapping to be the way | |
680 | that Mitsubishi prefers, but use the previous mapping if | |
681 | old_segment_mapping is true. | |
682 | (sim_open): Add an option -oldseg to get the old mapping. | |
683 | (sim_create_inferior): Init mapping registers based on the | |
684 | value of old_segment_mapping. | |
685 | ||
d4f3574e SS |
686 | 1999-09-07 Nick Clifton <nickc@cygnus.com> |
687 | ||
688 | * simops.c (OP_6601): Do not write back decremented address if | |
689 | either of the destination registers was the same as the address | |
72f4393d | 690 | register. |
d4f3574e | 691 | (OP_6201): Do not write back incremented address if either of the |
72f4393d | 692 | destination registers was the same as the address register. |
d4f3574e SS |
693 | |
694 | Thu Sep 2 18:15:53 1999 Andrew Cagney <cagney@b1.cygnus.com> | |
695 | ||
696 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
697 | ||
cd0fc7c3 SS |
698 | 1999-05-08 Felix Lee <flee@cygnus.com> |
699 | ||
700 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
72f4393d | 701 | |
7a292a7a SS |
702 | 1999-04-02 Keith Seitz <keiths@cygnus.com> |
703 | ||
704 | * interp.c (ui_loop_hook_counter): New global (when NEED_UI_LOOP_HOOK | |
705 | defined). | |
706 | (sim_resume): If the counter has expired, call the ui_loop_hook, | |
707 | if defined. | |
708 | (UI_LOOP_POLL_INTERVAL): Define. Used to tweak the frequency of | |
709 | ui_loop_hook calls. | |
710 | * Makefile.in (SIM_EXTRA_CFLAGS): Include NEED_UI_LOOP_HOOK. | |
711 | ||
712 | Wed Mar 10 19:32:13 1999 Nick Clifton <nickc@cygnus.com> | |
713 | ||
714 | * simops.c: If load instruction with auto increment/decrement | |
715 | addressing is used when the destination register is the same as | |
716 | the address register, then ignore the auto increment/decrement. | |
717 | ||
718 | Wed Mar 10 19:32:13 1999 Martin M. Hunt <hunt@cygnus.com> | |
719 | ||
720 | * simops.c (OP_5F00): Ifdef SYS_stat case because | |
721 | not all systems have it defined. | |
722 | ||
c906108c SS |
723 | 1999-01-26 Jason Molenda (jsm@bugshack.cygnus.com) |
724 | ||
725 | * simops.c (OP_5607): Correct saturation comparison/assignment. | |
72f4393d L |
726 | (OP_1201, OP_1203, OP_17001200, OP_17001202, |
727 | OP_2A00, OP_2800, OP_2C00, OP_3200, OP_3201, | |
728 | OP_1001, OP_1003, OP_17001000, OP_17001002): Ditto. | |
c906108c SS |
729 | |
730 | 1999-01-26 Jason Molenda (jsm@bugshack.cygnus.com) | |
731 | ||
732 | * simops.c (OP_5605): Sign extend MIN32 and MAX32 before saturation | |
72f4393d | 733 | comparison. |
c906108c SS |
734 | (OP_5607): Ditto. |
735 | (OP_2A00): Ditto. | |
736 | (OP_2800): Ditto. | |
737 | ||
738 | 1999-01-13 Jason Molenda (jsm@bugshack.cygnus.com) | |
739 | ||
740 | * simops.c (OP_1223): Sign extend MIN32 and MAX32 before saturation | |
741 | comparison. | |
742 | ||
743 | Tue Nov 24 17:04:43 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
744 | ||
745 | * simops.c (sys/syscall.h): Include targ-vals.h instead. | |
746 | (SYS_*): Replace with TARGET_SYS_*. | |
747 | ||
748 | * Makefile.in: Add dependency on targ-vals.h. | |
749 | (NL_TARGET): Define as NL_TARGET_d10v. | |
750 | ||
751 | Wed Sep 30 00:06:32 1998 Andrew Cagney <cagney@amy.cygnus.com> | |
752 | ||
753 | * interp.c (xfer_mem): Missing break, instruction memory case | |
754 | flowed into unified memory case. | |
755 | ||
756 | Wed Sep 30 10:14:18 1998 Nick Clifton <nickc@cygnus.com> | |
757 | ||
758 | * simops.c: If load instruction with auto increment/decrement | |
759 | addressing is used when the destination register is the same as | |
760 | the address register, then ignore the auto increment/decrement. | |
761 | ||
762 | Tue Apr 28 18:33:31 1998 Geoffrey Noer <noer@cygnus.com> | |
763 | ||
72f4393d | 764 | * configure: Regenerated to track ../common/aclocal.m4 changes. |
c906108c SS |
765 | |
766 | Sun Apr 26 15:31:55 1998 Tom Tromey <tromey@creche> | |
767 | ||
768 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
769 | * config.in: Ditto. | |
770 | ||
771 | Sun Apr 26 15:20:23 1998 Tom Tromey <tromey@cygnus.com> | |
772 | ||
773 | * acconfig.h: New file. | |
774 | * configure.in: Reverted change of Apr 24; use sinclude again. | |
775 | ||
776 | Fri Apr 24 14:16:40 1998 Tom Tromey <tromey@creche> | |
777 | ||
778 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
779 | * config.in: Ditto. | |
780 | ||
781 | Fri Apr 24 11:20:06 1998 Tom Tromey <tromey@cygnus.com> | |
782 | ||
783 | * configure.in: Don't call sinclude. | |
784 | ||
785 | Fri Apr 24 11:04:46 1998 Andrew Cagney <cagney@chook.cygnus.com> | |
786 | ||
787 | * interp.c (struct hash_entry): OPCODE and MASK are unsigned. | |
788 | ||
789 | * d10v_sim.h (remote-sim.h, sim-config.h): Include. | |
72f4393d | 790 | |
c906108c SS |
791 | Sat Apr 4 20:36:25 1998 Andrew Cagney <cagney@b1.cygnus.com> |
792 | ||
793 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
794 | ||
795 | Wed Apr 1 12:59:17 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
796 | ||
797 | * simops.c (trace_input_func): Use move_from_cr / CREGS to obtain | |
798 | up-to-date CR value. | |
799 | (OP_OP_1000000, add3): Trace inputs before performing add. | |
800 | (OP_5F00, <*>): Trace input registers before making system call. | |
801 | (OP_5F00, <kill>): Trace R0, R1 not REGn. | |
802 | (OP_5F00, <getpid>): Always return 47. | |
72f4393d | 803 | |
c906108c SS |
804 | * d10v_sim.h (SLOT, SLOT_NR, SLOT_PEND_MASK, SLOT_PEND, |
805 | SLOT_DISCARD, SLOT_FLUSH): Define. An implementation of write | |
806 | back slots. | |
807 | (struct _state): Add struct slot slot to global state variable. | |
808 | (struct _state): Delete fields SM, EA, DB, DM, IE, RP, MD, FX, ST, | |
809 | F0, F1, C from global State variable. | |
810 | (struct _state): Add struct trace to global State variable. | |
811 | (GPR, SET_GPR): Define. SET_GPR uses SLOT_PEND. | |
812 | (PSW*, SET_PSW*): Define. SET_PSW* uses SET_CREG. | |
813 | (CREG, SET_CREG, SET_*): Define. SET_CREG uses func move_to_cr. | |
814 | (INC_ADDR): Re-implement. Use SET_GPR to update registers. | |
815 | (JMP): Re-implement. Use SET_* to update registers. | |
816 | ||
817 | * interp.c: Use new SET_* et.al. macros to fetch / store | |
818 | registers. | |
819 | (get_operands): Squirrel away trace values at start of each | |
820 | operand decode. | |
821 | (do_2_short): Flush pending writes before issuing second | |
822 | instruction. | |
823 | (sim_resume): Flush pending writes at end of instruction cycle. | |
824 | (sim_fetch_register, sim_store_register, sim_create_inferior): | |
825 | After scheduling updates to registers using SET_*, flush updates. | |
826 | (sim_resume): Re-order handling of RPT/repeat and IBA/hbreak so | |
827 | that each sets pc using SET_* and last SET_* eventually winds out. | |
72f4393d | 828 | |
c906108c SS |
829 | * simops.c: Use new SET_* et.al. macros to fetch / store |
830 | registers. | |
831 | (move_to_cr): Add MASK argument for selective update of CREG bits. | |
832 | Re-implement using new SET_* macros. | |
833 | (trace_output_func, trace_output): Delete. Replace with. | |
834 | (do_trace_output_flush, trace_output_finish, trace_output_40, | |
835 | trace_output_32, trace_output_16, trace_output_void, | |
836 | trace_output_flag): New functions. Handle specific trace cases. | |
837 | (OP_*): Re-write tracing to use new trace_output_* functions. | |
838 | (OP_*): Re-write to use new SET_* et.al. macros. | |
839 | (FUNC, PARM[1-4], RETVAL, RETVAL32): Redo definition. | |
840 | (RETVAL_HIGH, RETVAL_LOW): Delete, use RETVAL32. | |
72f4393d | 841 | |
c906108c SS |
842 | Wed Apr 1 12:55:18 1998 Andrew Cagney <cagney@b1.cygnus.com> |
843 | ||
844 | * configure.in (SIM_AC_OPTION_WARNINGS): Add. | |
845 | configure: Re-generate. | |
846 | ||
847 | Fri Mar 27 16:15:52 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
848 | ||
849 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
850 | ||
851 | Wed Mar 25 12:35:29 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
852 | ||
853 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
854 | ||
855 | Wed Mar 18 12:38:12 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
856 | ||
857 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
858 | ||
859 | Tue Feb 17 12:38:42 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
860 | ||
861 | * interp.c (sim_store_register, sim_fetch_register): Pass in | |
862 | length parameter. Return -1. | |
863 | ||
864 | Mon Oct 27 14:43:33 1997 Fred Fish <fnf@cygnus.com> | |
865 | ||
866 | * (dmem_addr): If address is illegal or in I/O space, signal a bus | |
867 | error. Allocate unified memory on demand. Fix DMEM address | |
868 | calculations. | |
72f4393d | 869 | |
c906108c SS |
870 | Mon Feb 16 10:27:53 1998 Andrew Cagney <cagney@b1.cygnus.com> |
871 | ||
872 | * simops.c (OP_5F20): Implement "dbt". | |
873 | (OP_5F60): Implement "rtd". | |
874 | ||
875 | * d10v_sim.h (DPC_CR): Define enum. | |
876 | (DBT_VECTOR_START): Define | |
877 | (DPSW, DPC): Define. | |
878 | ||
879 | Fri Feb 13 15:15:58 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
880 | ||
881 | * simops.c (move_to_cr): Sync regs[SP_IDX] with State.sp according | |
882 | to PSW:SM. | |
883 | ||
884 | * d10v_sim.h (struct _state): Add sp, as holding area for SPI/SPU. | |
885 | (SP_IDX): Define. | |
886 | ||
887 | Wed Feb 11 16:53:49 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
888 | ||
889 | * simops.c (OP_5F00): Call error instead of abort for unknown | |
890 | syscalls. | |
891 | ||
892 | * d10v_sim.h (enum): Define DPSW_CR. | |
893 | ||
894 | * simops.c (move_to_cr): Mask out hardwired zero bits in DPSW. | |
895 | ||
896 | Tue Feb 10 18:28:38 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
897 | ||
898 | * interp.c (sim_write_phys): Delete. | |
899 | (sim_load): Call sim_load_file with sim_write and LMA. | |
900 | ||
901 | Mon Feb 9 12:05:01 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
902 | ||
903 | * interp.c: Rewrite xfer_mem so that it translates addresses as - | |
904 | 0x00... - DMAP translated memory, 0x01... IMAP translated memory, | |
905 | 0x10... - on-chip data, 0x11... - on-chip insn, 0x12... - unified | |
906 | memory. | |
907 | (pc_addr): Delete. | |
908 | (imem_addr): New function - translate IMEM address. | |
909 | (sim_resume): Use imem_addr to translate insn address, abort if | |
910 | translation failed. | |
911 | (sim_create_inferior): Write ARGV to memory using sim_write. Pass | |
912 | argc/argv using r0/r1 not r2/r3. | |
913 | (sim_size): Do not initialize IMAP/DMAP here. | |
914 | (sim_open): Call sim_create_inferior and sim_size to initialize | |
915 | the system. | |
916 | (sim_create_inferior): Initialize IMAP/DMAP to hardware reset | |
917 | defaults. | |
918 | (init_system): Delete. | |
919 | (xfer_mem, sim_fetch_register, sim_store_register): Do not call | |
920 | init_system. | |
921 | (decode_pc): Check prog_bfd is defined before looking up .text | |
922 | section. | |
923 | ||
924 | Sun Feb 1 16:47:51 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
925 | ||
926 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
927 | ||
928 | Sat Jan 31 18:15:41 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
929 | ||
930 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
931 | ||
932 | Sun Jan 25 22:23:01 1998 Michael Meissner <meissner@cygnus.com> | |
933 | ||
934 | * interp.c (sim_stop_reason): Exit status is now in r0, not r2. | |
935 | ||
936 | Sat Jan 24 19:00:30 1998 Michael Meissner <meissner@cygnus.com> | |
937 | ||
938 | * d10v_sim.h (DEBUG_TRAP): New debug flag. | |
939 | ||
940 | * simops.c (OP_5F00): If DEBUG_TRAP is on, turn traps 0-14 into | |
941 | printing the registers. | |
942 | ||
943 | Thu Jan 22 17:54:01 1998 Michael Meissner <meissner@cygnus.com> | |
944 | ||
945 | * simops.c (op_types): New ABI, args are r0..r3, system call # is | |
946 | in r4. | |
947 | (trace_{in,out}put_func): Ditto. | |
948 | (OP_4900): Ditto. | |
949 | (OP_24800000): Ditto. | |
950 | (OP_4D00): Ditto. | |
951 | (OP_5F00): Ditto. | |
952 | ||
953 | Thu Jan 22 14:30:36 1998 Fred Fish <fnf@cygnus.com> | |
954 | ||
955 | * interp.c (UMEM_SEGMENTS): New define, set to 128. | |
956 | (sim_size): Use UMEM_SEGMENTS rather than hardwired constant. | |
957 | (sim_close): Reset prog_bfd to NULL after closing it. Also | |
958 | reset prog_bfd_was_opened_p after closing prog_bfd. | |
959 | (sim_load): Reset prog_bfd_was_opened_p after closing prog_bfd. | |
960 | (sim_create_inferior): Get start address from abfd not prog_bfd. | |
961 | (xfer_mem): Do bounds checking on addresses and return zero length | |
962 | read/write on bad addresses, rather than aborting. Prepare to | |
963 | be able to handle xfers that cross segment boundaries, but not | |
964 | yet implemented. Only emit debug message when d10v_debug is | |
965 | set as well as DEBUG being defined. | |
966 | ||
967 | Mon Jan 19 22:26:29 1998 Doug Evans <devans@seba> | |
968 | ||
969 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
970 | ||
971 | Mon Dec 15 23:17:11 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
972 | ||
973 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
974 | * config.in: Ditto. | |
975 | ||
976 | Tue Dec 9 10:28:31 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
977 | ||
978 | * d10v_sim.h (RPT_S): Index cregs with RPT_S_CR not RPT_E_CR. | |
979 | (BPSW): Ditto for BPSW_CR and not PSW_CR. | |
980 | ||
981 | * simops.c (OP_5F40): JMP to BPC instead of assigning PC directly. | |
72f4393d | 982 | |
c906108c SS |
983 | Mon Dec 8 12:58:33 1997 Andrew Cagney <cagney@b1.cygnus.com> |
984 | ||
985 | * simops.c (OP_5F00): From Martin Hunt <hunt@cygnus.com>. Change | |
986 | reserved trap from 0 to 15. Add trap emulation code for 0-14. | |
987 | ||
988 | * interp.c (sim_resume): From Martin Hunt <hunt@cygnus.com>. Check | |
989 | IBA for SDBT. | |
990 | ||
991 | * d10v_sim.h (AE_VECTOR_START, RIE_VECTOR_START, | |
992 | SDBT_VECTOR_START, TRAP_VECTOR_START): Define. | |
72f4393d | 993 | |
c906108c SS |
994 | * simops.c (OP_5F00): For "trap", mask out all but SM bit in PSW, |
995 | use move_to_cr. | |
996 | (OP_5F00): For "trap", update BPSW with move_to_cr. | |
997 | ||
998 | Fri Dec 5 15:31:17 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
999 | ||
1000 | * d10v_sim.h (enum): Enumerate CR register names. | |
1001 | (enum): Enumerate PSW bit values. | |
1002 | (PSW): Obtain value uing move_from_cr. | |
1003 | (MOD_S, MOD_E, BPSW): Make r-values. | |
1004 | (move_from_cr, move_to_cr): Declare functions. | |
72f4393d | 1005 | |
c906108c SS |
1006 | * interp.c (sim_fetch_register, sim_store_register): Use |
1007 | move_from_cr and move_to_cr for CR register transfers. | |
1008 | ||
1009 | * simops.c (move_from_cr, move_to_cr): New functions. | |
1010 | (OP_5F40): Move BPSW to PSW using move_to_cr and move_from_cr. | |
1011 | (OP_5600): For "mvtc", use function move_to_cr. | |
1012 | (OP_5200): For "mvfc", use function move_from_cr. | |
1013 | ||
1014 | Fri Dec 5 13:33:14 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1015 | ||
1016 | * simops.c (OP_5600): For "mvtc" MOD_E and MOD_S, ensure that the | |
1017 | LSbit is zero. | |
1018 | ||
1019 | Thu Dec 4 09:21:05 1997 Doug Evans <devans@canuck.cygnus.com> | |
1020 | ||
1021 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
1022 | ||
1023 | Thu Dec 4 16:51:02 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1024 | ||
1025 | * d10v_sim.h (struct _state): Add DM - PSW debug mask. | |
1026 | ||
1027 | * simops.c (OP_5600): For "mvtc", save PSW.DM. | |
1028 | (OP_5200): Ditto for "mvfc". | |
1029 | ||
1030 | Wed Dec 3 17:27:06 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1031 | ||
1032 | * d10v_sim.h (SEXT56): Define. | |
1033 | ||
1034 | * simops.c (OP_4201): For "rac", sign extend 56 bit value before | |
1035 | it is shifted. | |
1036 | ||
1037 | * d10v_sim.h (MAX32, MIN32, MASK32, MASK40): Re-define using | |
1038 | SIGNED64 macro. | |
1039 | ||
1040 | Tue Dec 2 15:38:34 1997 Fred Fish <fnf@cygnus.com> | |
1041 | ||
1042 | * interp.c (sim_resume): Call do_2_short with LEFT_FIRST or | |
1043 | RIGHT_FIRST, as appropriate, instead of hardcoded ints that | |
1044 | don't match enum values. | |
1045 | ||
1046 | Tue Dec 2 15:01:08 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1047 | ||
1048 | * simops.c (OP_3A00): For "macu", perform multiply stage using 32 | |
1049 | bit rather than 16 bit precision. | |
1050 | (OP_3C00): For "mulxu", store unsigned product in ACC. | |
1051 | (OP_3800): For "msbu", subtract unsigned product from ACC, | |
1052 | (OP_0): For "sub", compute carry by comparing inputs. | |
1053 | ||
1054 | Tue Dec 2 11:04:37 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1055 | ||
1056 | * simops.c (OP_1000): For "sub2w", compute carry by comparing | |
1057 | inputs. | |
1058 | ||
1059 | Mon Nov 17 20:57:21 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1060 | ||
1061 | * simops.c (OP_1): Use 32 bit unsigned arithmetic for subtract, | |
1062 | carry indicated by value > 0xffff. | |
1063 | ||
1064 | Fri Nov 14 12:51:20 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1065 | ||
1066 | * interp.c (sim_resume): Don't set up SIGINT handler using signal, | |
1067 | handled by client. | |
1068 | (sim_resume): Fix race condition of a direct assignment to | |
1069 | stop_simulator, conditionally call sim_stop. | |
1070 | (sim_stop_reason): Check stop_simulator returning SIGINT. Clear | |
1071 | stop_simulator ready for next sim_resume call. | |
1072 | (sim_ctrl_c): Delete function. | |
1073 | ||
1074 | Thu Nov 13 19:29:34 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1075 | ||
1076 | * interp.c (sim_resume): For "REP", only check/update the PC when | |
1077 | a branch instruction has not been executed. | |
1078 | ||
1079 | Mon Nov 10 17:50:18 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1080 | ||
1081 | * simops.c (OP_4201): "rachi". Sign extend bit 40 of ACC. Sign | |
1082 | extend bit 44 all constants. | |
1083 | (OP_4201): Replace GCC specific 0x..LL with SIGNED64 macro. | |
72f4393d | 1084 | |
c906108c SS |
1085 | Fri Oct 24 10:26:29 1997 Andrew Cagney <cagney@b1.cygnus.com> |
1086 | ||
1087 | * d10v_sim.h: Include sim-types.h. | |
1088 | (uint8, in816, uiny16, int32, uint32, int64, uint64): Typedef | |
1089 | using unsigned8 et.al. from sim-types.h. | |
1090 | (SEXT32, SEXT40, SEXT44, SEXT60): Replace GCC specific 0x..LL with | |
1091 | SIGNED64 macro. | |
1092 | ||
1093 | Wed Oct 22 14:43:00 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1094 | ||
1095 | * interp.c (sim_write_phys): New function, write to physical | |
1096 | instead of virtual memory. | |
72f4393d | 1097 | |
c906108c SS |
1098 | * interp.c (sim_load): Pass lma_p and sim_write_phys to |
1099 | sim_load_file. | |
1100 | ||
1101 | Mon Oct 13 10:55:07 1997 Fred Fish <cygnus.com> | |
1102 | ||
1103 | * simops.c (OP_6A01): Change OP_POSTDEC to OP_POSTINC and move | |
1104 | exception generation code to OP_6E01. | |
1105 | (OP_6E01): Change OP_POSTINC to OP_POSTDEC and insert exception | |
1106 | generation code. | |
1107 | ||
1108 | Sat Oct 11 09:02:08 1997 Fred Fish <fnf@cygnus.com> | |
1109 | ||
1110 | * simops.c (OP_6401): postdecrement on r15 is OK, remove exception. | |
1111 | (OP_6601): Ditto. | |
1112 | ||
1113 | Fri Oct 3 09:28:00 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1114 | ||
1115 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
1116 | ||
1117 | Sat Sep 27 12:51:34 1997 Fred Fish <fnf@cygnus.com> | |
1118 | ||
1119 | * interp.c (pc_addr): Discard upper bit(s) of PC in case | |
1120 | IMAP1 selects unified memory. | |
1121 | * d10v_sim.h (INC_ADDR): Align MOD_E to increment before testing | |
1122 | for end condition. | |
1123 | ||
1124 | Wed Sep 24 17:38:57 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1125 | ||
1126 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
1127 | ||
1128 | Tue Sep 23 11:04:38 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1129 | ||
1130 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
1131 | ||
1132 | Mon Sep 22 11:46:20 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1133 | ||
1134 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
1135 | ||
1136 | Fri Sep 19 17:45:25 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1137 | ||
1138 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
1139 | ||
1140 | Mon Sep 15 17:36:15 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1141 | ||
1142 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
1143 | ||
1144 | Wed Sep 10 22:30:24 1997 Martin M. Hunt <hunt@cygnus.com> | |
1145 | ||
1146 | * interp.c (sim_resume): Increment PC at end of rep | |
1147 | loop. | |
1148 | ||
1149 | * simops.c (OP_4201): Fix rachi instruction. | |
1150 | ||
1151 | Thu Sep 4 17:21:23 1997 Doug Evans <dje@seba> | |
1152 | ||
1153 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
1154 | ||
1155 | Wed Aug 27 18:13:22 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1156 | ||
1157 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
1158 | * config.in: Ditto. | |
1159 | ||
1160 | Tue Aug 26 10:37:49 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1161 | ||
1162 | * interp.c (sim_kill): Delete. | |
1163 | (sim_create_inferior): Add ABFD argument. | |
1164 | (sim_load): Move setting of PC from here. | |
1165 | (sim_create_inferior): To here. | |
1166 | (start_address): Delete variable. | |
1167 | ||
1168 | Mon Aug 25 17:50:22 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1169 | ||
1170 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
1171 | * config.in: Ditto. | |
1172 | ||
1173 | Mon Aug 25 15:39:29 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1174 | ||
1175 | * interp.c (sim_open): Add ABFD argument. | |
1176 | ||
1177 | Tue May 20 10:14:45 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1178 | ||
1179 | * interp.c (sim_open): Add callback argument. | |
1180 | (sim_set_callbacks): Remove SIM_DESC argument. | |
1181 | ||
1182 | Thu Apr 24 00:39:51 1997 Doug Evans <dje@canuck.cygnus.com> | |
1183 | ||
1184 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
1185 | ||
1186 | Tue Apr 22 10:29:23 1997 Doug Evans <dje@canuck.cygnus.com> | |
1187 | ||
1188 | * interp.c (sim_open): Undo patch to add -E support. | |
1189 | ||
1190 | Fri Apr 18 13:39:01 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1191 | ||
1192 | * interp.c (sim_stop): New function. | |
1193 | ||
1194 | Thu Apr 17 02:42:00 1997 Doug Evans <dje@canuck.cygnus.com> | |
1195 | ||
1196 | * Makefile.in (SIM_OBJS): Add sim-load.o. | |
1197 | * d10v_sim.h (exec_bfd): Rename to prog_bfd. | |
1198 | * interp.c: #include bfd.h. | |
1199 | (myname, sim_kind, start_address): New static locals. | |
1200 | (prog_bfd_was_opened_p, prog_bfd): New static locals. | |
1201 | (decode_pc): Update to use prog_bfd. | |
1202 | (sim_open): Set sim_kind, myname. Ignore -E arg. | |
1203 | (sim_close): Close prog_bfd if simulator opened it. | |
1204 | (sim_create_inferior): Return SIM_RC. Delete arg start_address. | |
1205 | (sim_load): Return SIM_RC. New arg abfd. Set start address from bfd. | |
1206 | Call sim_load_file to load file into simulator. | |
1207 | * simops.c (trace_input_func): exec_bfd renamed to prog_bfd. | |
1208 | ||
1209 | Wed Apr 16 16:12:03 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1210 | ||
1211 | * simops.c (OP_5F00): Only provide system calls SYS_execv, | |
1212 | SYS_wait, SYS_wait, SYS_utime, SYS_time if defined by the host. | |
72f4393d | 1213 | |
c906108c SS |
1214 | Mon Apr 7 15:45:02 1997 Andrew Cagney <cagney@kremvax.cygnus.com> |
1215 | ||
1216 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
1217 | * config.in: Ditto. | |
1218 | ||
1219 | Wed Apr 2 15:06:28 1997 Doug Evans <dje@canuck.cygnus.com> | |
1220 | ||
1221 | * interp.c (sim_open): New arg `kind'. | |
1222 | ||
1223 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
1224 | ||
1225 | Wed Apr 2 14:34:19 1997 Andrew Cagney <cagney@kremvax.cygnus.com> | |
1226 | ||
1227 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
1228 | ||
1229 | Mon Mar 17 15:10:07 1997 Andrew Cagney <cagney@kremvax.cygnus.com> | |
1230 | ||
1231 | * configure: Re-generate. | |
1232 | ||
1233 | Fri Mar 14 10:34:11 1997 Michael Meissner <meissner@cygnus.com> | |
1234 | ||
1235 | * configure: Regenerate to track ../common/aclocal.m4 changes. | |
1236 | ||
1237 | * simops.c (OP_5F00): Remove old traps 1-3. Make trap 15 the same | |
1238 | as trap 0, which will be deprecated. Only set errno, if an error | |
1239 | in fact was returned. | |
1240 | ||
1241 | Thu Mar 13 12:41:20 1997 Doug Evans <dje@canuck.cygnus.com> | |
1242 | ||
1243 | * interp.c: Delete redundant prototypes of sim_foo fns. | |
1244 | (sim_open): New SIM_DESC result. Argument is now in argv form. | |
1245 | (other sim_*): New SIM_DESC argument. | |
1246 | ||
1247 | Thu Mar 13 10:29:04 1997 Michael Meissner <meissner@cygnus.com> | |
1248 | ||
1249 | * simops.c (trace_{input,output}_func): Call flush_stdout from the | |
1250 | callback functions. | |
1251 | (OP_5F00): Ditto. | |
1252 | (OP_6{4,6,C,A}01): Test for post decrement on the stack pointer. | |
1253 | (OP_{1200,1000000,201,5FE0,1003,17001002}): Fix problems in | |
1254 | setting the carry bit after an add or a subtract. | |
1255 | ||
1256 | Wed Feb 12 16:04:15 1997 Michael Meissner <meissner@cygnus.com> | |
1257 | ||
1258 | * simops.c (OP_{1403,15002A02,3{0,4}0{0,1}}): Only use the bottom | |
1259 | 40 bits of accumulators. Sign/zero extend as appropriate. | |
1260 | ||
1261 | Tue Feb 4 13:33:30 1997 Doug Evans <dje@canuck.cygnus.com> | |
1262 | ||
1263 | * Makefile.in (@COMMON_MAKEFILE_FRAG): Use | |
1264 | COMMON_{PRE,POST}_CONFIG_FRAG instead. | |
1265 | * configure.in: sinclude ../common/aclocal.m4. | |
1266 | * configure: Regenerated. | |
1267 | ||
1268 | Thu Jan 23 11:46:23 1997 Stu Grossman (grossman@critters.cygnus.com) | |
1269 | ||
1270 | * configure configure.in Makefile.in: Update to new configure | |
1271 | scheme which is more compatible with WinGDB builds. | |
1272 | * configure.in: Improve comment on how to run autoconf. | |
1273 | * configure: Re-run autoconf to get new ../common/aclocal.m4. | |
1274 | * Makefile.in: Use autoconf substitution to install common | |
1275 | makefile fragment. | |
1276 | ||
1277 | Fri Dec 27 22:54:05 1996 Angela Marie Thomas (angela@cygnus.com) | |
1278 | ||
1279 | * gencode.c: patch to not #include "d10v_sim.h" which | |
1280 | unecessarily includes bfd.h and causes wingdb configure | |
1281 | to fail. | |
1282 | ||
1283 | Mon Dec 16 13:39:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com> | |
1284 | ||
1285 | * interp.c (xfer_mem): Change unified memory to 0x0. | |
1286 | ||
1287 | Thu Nov 28 20:42:56 1996 Michael Meissner <meissner@tiktok.cygnus.com> | |
1288 | ||
1289 | * simops.c (OP_3E01): Fix tracing information. | |
1290 | (OP_300{0,1}): Do not propigate sign. | |
1291 | ||
1292 | Mon Nov 25 19:47:40 1996 Doug Evans <dje@canuck.cygnus.com> | |
1293 | ||
1294 | * config.in (WORDS_BIGENDIAN): Add. | |
1295 | * configure: Regenerated. | |
1296 | * d10v_sim.h: #include "config.h" | |
1297 | ||
1298 | Sat Nov 23 09:34:50 1996 Michael Meissner <meissner@tiktok.cygnus.com> | |
1299 | ||
1300 | * gencode.c (write_opcodes): Eliminate warnings when generated | |
1301 | table.c is compiled. | |
1302 | ||
1303 | Wed Nov 20 19:41:40 1996 Michael Meissner <meissner@tiktok.cygnus.com> | |
1304 | ||
1305 | * interp.c (sim_open): Cast result of calloc, and make sure NULL | |
1306 | was not returned. | |
1307 | (dmem_addr): If address is illegal or in I/O space, signal a bus | |
1308 | error. | |
1309 | (pc_addr): Signal bus error, not illegal instruction for bogus | |
1310 | pc. | |
1311 | ||
1312 | Wed Nov 20 01:23:03 1996 Doug Evans <dje@canuck.cygnus.com> | |
1313 | ||
1314 | * Makefile.in: Delete all stuff moved to ../common/Make-common.in. | |
1315 | (SIM_OBJS,SIM_EXTRA_CFLAGS,SIM_EXTRA_CLEAN): Define. | |
1316 | * configure.in: Simplify using macros in ../common/aclocal.m4. | |
1317 | Call AC_CHECK_HEADERS(unistd.h). | |
1318 | * configure: Regenerated. | |
1319 | * config.in: New file. | |
1320 | * interp.c: #include "callback.h". | |
1321 | * simops.c: #include "config.h". #include <unistd.h> if present. | |
1322 | ||
1323 | Fri Nov 8 16:19:55 1996 Martin M. Hunt <hunt@pizza.cygnus.com> | |
1324 | ||
1325 | * d10v-sim.h (simops): Add flag is_long. | |
1326 | (State): Add pc_changed. Instructions which update the PC should | |
1327 | use the JMP macro which sets this. | |
1328 | (JMP): New macro. Sets the PC and the pc_changed flag. | |
1329 | ||
1330 | * gencode.c (write_opcodes): Add is_long field. | |
72f4393d | 1331 | |
c906108c SS |
1332 | * interp.c (lookup_hash): If we blindly apply a short opcode's mask |
1333 | to a long opcode we could get a false match. Check the opcode size. | |
1334 | (hash): Add a size field to the hash table. | |
1335 | (sim_open): Initialize size field in hash table. | |
1336 | (sim_resume): Change to logic for setting the PC. Used to increment the | |
1337 | PC if it had not been changed. This didn't allow single-instruction loops. | |
1338 | Now checks the flag State.pc_changed. Also now stops when ^C is received. | |
1339 | (dmem_addr): Fix translation of data segments to unified memory. | |
1340 | (sim_ctrl_c): New function. When ^C is received, set stop_simulator flag. | |
1341 | ||
1342 | * simops.c: Changed all branch and jump instructions to use new JMP macro. | |
1343 | (OP_20000000): Corrected trace information to show this is a ldi.l, not | |
1344 | a ldi.s instruction. | |
72f4393d | 1345 | |
c906108c SS |
1346 | Thu Oct 31 19:13:55 1996 Martin M. Hunt <hunt@pizza.cygnus.com> |
1347 | ||
1348 | * interp.c (sim_fetch_register, sim_store_register): Fix bug where | |
1349 | updating the accumulators was overwriting other parts of the global | |
1350 | State variable. | |
1351 | ||
1352 | Wed Oct 30 17:35:14 1996 Michael Meissner <meissner@tiktok.cygnus.com> | |
1353 | ||
1354 | * interp.c (bfd.h) Don't include it here any more. | |
1355 | (text{,_start,_end}): Move here from simops.c and make extern. | |
1356 | (decode_pc): New function to return the PC as an address that the | |
1357 | debugger can use. | |
1358 | (dmem_addr): Print decoded PC in error message. | |
1359 | (pc_addr): Ditto. | |
1360 | ||
1361 | * simops.c (bfd.h) Don't include it here any more. | |
1362 | (text{,_start,_end}): Move to simops.c. | |
1363 | (trace_input_func): Move decoding of PC, and looking up .text | |
1364 | start to decode_pc. | |
1365 | ||
1366 | * d10v_sim.h (bfd.h): Include it here. | |
1367 | (text{,_start,_end}): Add external declarations. | |
1368 | (exec_bfd): Ditto. | |
1369 | (decode_pc): Ditto. | |
1370 | ||
1371 | Tue Oct 29 12:13:52 1996 Martin M. Hunt <hunt@pizza.cygnus.com> | |
1372 | ||
1373 | * interp.c (sim_size): Now allocates unified memory for imap segments | |
1374 | 0,1,2, and 127. Initializes imap0 and imap1 to 0x1000. Initializes dmap to 0. | |
1375 | (sim_write): Just call xfer_mem(). | |
1376 | (sim_read): Just call xfer_mem(). | |
1377 | (xfer_mem): New function. Does appropriate memory mapping and copies bytes. | |
1378 | (dmem_addr): New function. Reads dmap register and translates data | |
1379 | addresses to local addresses. | |
1380 | (pc_addr): New function. Reads imap register and computes local address | |
1381 | corresponding to contents of the PC. | |
1382 | (sim_resume): Change to use pc_addr(). | |
1383 | (sim_create_inferior): Change reinitialization code. Also reinitializes | |
1384 | imap[01] and dmap. | |
1385 | (sim_fetch_register): Add fake registers 32,33,34 for imap0, imap1, and dmap. | |
1386 | (sim_store_register): Add fake registers 32,33,34 for imap0, imap1, and dmap. | |
1387 | ||
1388 | * simops.c (MEMPTR): Redefine to use dmem_addr(). | |
1389 | (OP_5F00): Replace references to STate.imem with dmem_addr(). | |
72f4393d | 1390 | |
c906108c SS |
1391 | * d10v-sim.h (State): Remove mem_min and mem_max. Add umem[128]. |
1392 | (RB,SW,RW,SLW,RLW): Redefine to use dmem_addr(). | |
1393 | (IMAP0,IMAP1,DMAP,SET_IMAP,SET_IMAP1,SET_DMAP): Define. | |
72f4393d | 1394 | |
c906108c SS |
1395 | Tue Oct 22 15:22:33 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
1396 | ||
1397 | * d10v_sim.h (_ins_type): Reorganize, so that we can provide | |
1398 | better statistics, like not counting NOPS as parallel | |
1399 | instructions, and printing total cycles. | |
1400 | (ins_type_counters): Make unsigned long. | |
1401 | (left_nops,right_nops): Fold into ins_type_counters. | |
1402 | ||
1403 | * simops.c (trace_input_func): Print new instruction types. | |
1404 | Handle OP_R2R3 as input types. | |
1405 | (OP_{38000000,7000}): Correctly sign extend bytes. | |
1406 | (OP_5E00): Don't count NOPs as parallel instructions. | |
1407 | (OP_460B): Remove unused variable. | |
1408 | (OP_5F00): Ditto. | |
1409 | ||
1410 | * interp.c (ins_type_counters): Make unsigned long. | |
1411 | (left_nops,right_nops): Delete. | |
1412 | (most functions): Add prototypes. | |
1413 | (INLINE): If GCC and optimize define as __inline__. | |
1414 | ({,lookup_}hash,get_operands): Declare as INLINE. | |
1415 | (do_parallel): Count conditional operations. | |
1416 | (add_commas): New function, to add commas every 3 digits. | |
1417 | (sim_size): Call add_commas to print numbers. | |
1418 | (sim_{open,resume}): Delete unused variables. | |
1419 | (sim_info): Provide better statistics. | |
1420 | (sim_read): Add int return type. | |
1421 | ||
1422 | Mon Oct 21 16:16:26 1996 Martin M. Hunt <hunt@pizza.cygnus.com> | |
1423 | ||
1424 | * interp.c (sim_resume): Change the way single-stepping and exceptions | |
1425 | are handled so single-stepping works again. | |
1426 | ||
1427 | Thu Oct 17 12:24:16 1996 Michael Meissner <meissner@tiktok.cygnus.com> | |
1428 | ||
1429 | * endian.c: Optimize simulated loads/stores on x86, AIX, and big | |
1430 | endian hosts. | |
1431 | ||
1432 | * configure.in (--enable-sim-bswap): New switch to enable using | |
1433 | the BSWAP instruction on x86's. | |
1434 | * configure: Regenerate. | |
1435 | ||
1436 | * Makefile.in ({SWAP,CONFIG}_CFLAGS): Add --enable-sim-bswap | |
1437 | support. | |
1438 | ||
1439 | Wed Oct 16 13:50:06 1996 Michael Meissner <meissner@tiktok.cygnus.com> | |
1440 | ||
1441 | * endian.c: New file. Move endian functions here from interp.c. | |
1442 | Optimize code, and make it work as either inline functions or as a | |
1443 | separate file. | |
1444 | ||
1445 | * interp.c: Move endian functions from here to endian.c. | |
1446 | ||
1447 | * Makefile.in (INCLUDE): Add endian.c. | |
1448 | (run,libsim.a): Add dependency on endian.o. | |
1449 | (endian.o): Add dependency. | |
1450 | ||
1451 | * d10v_sim.h (read/write support): Always go through the machine | |
1452 | independent endian functions. If compiling with GCC and | |
1453 | optimizing, include endian.c so the endian functions are inlined. | |
1454 | ||
72f4393d | 1455 | * simops.c (OP_5F00): Correct tracing of accumulators. |
c906108c SS |
1456 | |
1457 | Tue Oct 15 10:57:50 1996 Michael Meissner <meissner@tiktok.cygnus.com> | |
1458 | ||
1459 | * simops.c (OP_5F00): Add support for getpid, kill system calls. | |
1460 | ||
1461 | * interp.c (do_{2_short,parallel}): If an exception is raised, | |
1462 | don't execute the second instruction. | |
1463 | ||
1464 | Sat Oct 12 22:17:43 1996 Michael Meissner <meissner@tiktok.cygnus.com> | |
1465 | ||
1466 | * simops.c (OP_{31000000,6601,6201,6200}): Store address in a | |
1467 | temporary in case the register is overriden when loading. | |
1468 | (OP_6200): Output type is OP_DREG for tracing. | |
1469 | ||
1470 | Fri Oct 4 23:46:18 1996 Michael Meissner <meissner@tiktok.cygnus.com> | |
1471 | ||
1472 | * d10v_sim.h (struct _state): Add mem_{min,max} fields. | |
1473 | ||
1474 | * interp.c (sim_size): Initialize mem_{min,max} fields. | |
1475 | (sim_write): Update mem_{min,max} fields. | |
1476 | (sim_resume): If PC is not in the minimum/maximum memory range, | |
1477 | abort. | |
1478 | (sim_create_inferior): Preserve mem_{min,max} fields. | |
1479 | ||
1480 | Fri Sep 27 13:11:58 1996 Mark Alexander <marka@cygnus.com> | |
1481 | ||
1482 | * simops.c (OP_5F00): Add support for time() system call. | |
1483 | ||
1484 | Wed Sep 25 16:31:41 1996 Michael Meissner <meissner@tiktok.cygnus.com> | |
1485 | ||
1486 | * simops.c (OP_{6E01,6A01,6E1F,6A00}): Print both words being | |
1487 | stored if tracing. | |
1488 | (OP_5F00,trace_{in,out}put_func): Add finer grain tracing for | |
1489 | system calls. | |
1490 | ||
1491 | Mon Sep 23 17:55:30 1996 Michael Meissner <meissner@tiktok.cygnus.com> | |
1492 | ||
1493 | * simops.c (op_types): Add OP_{CONSTANT8,R2,R3}. | |
1494 | (trace_input_func): Add support for OP_{CONSTANT8,R2,R3}. | |
1495 | (OP_{4900,24800000,4800,4A00,4B00,4D00,4C00}): Add OP_R2 and OP_R3 | |
1496 | to call/subroutine returns to trace the first two arguments and | |
1497 | the return value. For small jumps, use CONSTANT8, not CONSTANT16. | |
1498 | ||
1499 | Fri Sep 20 15:36:45 1996 Martin M. Hunt <hunt@pizza.cygnus.com> | |
1500 | ||
72f4393d | 1501 | * interp.c (sim_create_inferior): Reinitialize State every time |
c906108c SS |
1502 | sim_create_inferior() is called. |
1503 | ||
1504 | Thu Sep 19 21:38:20 1996 Michael Meissner <meissner@wogglebug.ziplink.net> | |
1505 | ||
1506 | * simops.c (OP_{401,2000000,601,3000000,23000000}): Get sign right | |
1507 | on comparisons. | |
1508 | (OP_401): Fix tracing information. | |
1509 | ||
1510 | Thu Sep 19 10:30:22 1996 Michael Meissner <meissner@tiktok.cygnus.com> | |
1511 | ||
1512 | * simops.c (SIZE_{PC,LINE_NUMBER}): New default sizes for output. | |
1513 | (trace_input_func): Use them. | |
1514 | (trace_input_func): Make sure there is a trailing space after the | |
1515 | instruction. | |
1516 | (OP_6200): Fix tracing info. | |
1517 | ||
1518 | * Makefile.in (run): Add dependencies on libbfd.a and | |
1519 | libiberity.a. | |
1520 | ||
1521 | Wed Sep 18 09:13:25 1996 Michael Meissner <meissner@tiktok.cygnus.com> | |
1522 | ||
1523 | * d10v_sim.h (DEBUG_INSTRUCTION): New debug value to include line | |
1524 | numbers and function names in debug trace. | |
1525 | (DEBUG): If not defined, set to DEBUG_TRACE, DEBUG_VALUES, and | |
72f4393d | 1526 | DEBUG_LINE_NUMBER. |
c906108c SS |
1527 | (SIG_D10V_{STOP,EXIT}): Values to represent the stop instruction |
1528 | and exit system call trap being executed. | |
1529 | ||
1530 | * interp.c (sim_stop_reason): Set exit code correctly for stop | |
1531 | instruction and exit system call trap. | |
1532 | ||
1533 | * configure.in (--enable-sim-cflags): Remove trace case. | |
1534 | (--enable-sim-debug): New switch to set the debug values. | |
1535 | * configure: Regenerate. | |
1536 | ||
1537 | * simops.c (trace_{input,output}_func): Rename from | |
1538 | trace_{input,output}. | |
1539 | (trace_{input,output}): Call trace_{input,output}_func if | |
1540 | d10v_debug is non-zero. | |
1541 | (SIZE_INSTRUCTION): Cut down to 8. | |
1542 | (SIZE_OPERANDS): Cut down to 18. | |
1543 | (SIZE_LOCATION): New value for size of line number, function name | |
1544 | field. | |
1545 | (init_text_p,text{,_start,_end}): New static variables for | |
1546 | printing line number and function name. | |
1547 | (exec_bfd): New external that run.c sets. | |
1548 | (trace_input_func): Print line number and function name if | |
1549 | available and if desired. | |
1550 | (OP_4E09): Don't print out DBT message. | |
1551 | (OP_5FE0): Set exception field to SIG_D10V_STOP. | |
72f4393d | 1552 | (OP_5F00): Set exception field to SIG_D10V_EXIT. |
c906108c SS |
1553 | |
1554 | Sat Sep 14 22:18:43 1996 Michael Meissner <meissner@tiktok.cygnus.com> | |
1555 | ||
1556 | * interp.c (do_2_short): If the instruction encodes jump->ins, | |
1557 | don't do the second instruction if the jump succeeds. | |
1558 | ||
1559 | Fri Sep 13 22:35:19 1996 Michael Meissner <meissner@tiktok.cygnus.com> | |
1560 | ||
1561 | * simops.c (OP_5F00): Use unknown traps to print all GPRs, | |
1562 | accumulators, PC, and F0/F1/C flags. | |
1563 | ||
1564 | Thu Sep 12 12:50:11 1996 Mark Alexander <marka@cygnus.com> | |
1565 | ||
1566 | * simops.c (OP_5F00): Fix problems with system calls. | |
1567 | ||
1568 | Thu Sep 12 12:19:28 1996 Michael Meissner <meissner@tiktok.cygnus.com> | |
1569 | ||
1570 | * simops.c (OP_5F00): Correct tracing information for trap. | |
1571 | ||
1572 | Wed Sep 11 18:55:50 1996 Michael Meissner <meissner@tiktok.cygnus.com> | |
1573 | ||
1574 | * Makefile.in (CSEARCH): Correctly find opcodes directory. | |
1575 | ||
1576 | Mon Sep 9 13:27:26 1996 Michael Meissner <meissner@tiktok.cygnus.com> | |
1577 | ||
1578 | * simops.c (trace_output): Properly align accumulator output. | |
1579 | (OP_3{0,2,4}00): Properly parenthesize test expression. Add error | |
1580 | if shift count is too high. | |
1581 | (OP_4E{00,02,04,20,22,40,42}): Make tests agree with book. | |
1582 | (OP_4E09): Make cpfg properly trace the input flags. | |
1583 | (op_types): Add OP_FLAG_OUTPUT. | |
1584 | (trace_{input,output}): Support OP_FLAG_OUTPUT. | |
1585 | (OP_31000000): This ld2w varient is a 16-bit memory reference, not | |
1586 | an 8-bit memory reference instruction for tracing purposes. | |
1587 | (OP_201): Addi needs to set the carry. | |
1588 | ||
1589 | Fri Sep 6 17:56:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com> | |
1590 | ||
1591 | * simops.c (OP_2600, OP_2601): Changed min and max comparisons | |
1592 | to use signed register values. | |
1593 | ||
1594 | Wed Sep 4 11:35:17 1996 Michael Meissner <meissner@tiktok.cygnus.com> | |
1595 | ||
1596 | * d10v_sim.h (DEBUG_*): Add bit flags for controlling debug | |
1597 | output. | |
1598 | (_ins_type): New enumeration to specify which container an | |
1599 | instruction is in, and whether it is part of a parallel operation. | |
1600 | (_state): Add ins_type field. | |
1601 | ({,u}int{8,16,32,64}): Use limits.h to size the appropriate types. | |
1602 | (ins_type_counters): Counters for the various instruction types. | |
1603 | ({left,right}_nops): Counters for the number of nops in each | |
1604 | container. | |
1605 | (d10v_debug): New variable to indicate whether debugging is turned | |
1606 | on. | |
1607 | ||
1608 | * simops.c: (all functions): Change all #ifdef DEBUG code so that | |
1609 | the input and output values can be traced, along with the | |
1610 | instruction type. Make the -t option enable tracing. | |
1611 | (all functions): Change printf calls to use the printf_filtered | |
1612 | function in the callback table. | |
1613 | ||
1614 | * interp.c (_leftright): New enumeration to say whether 2 short | |
1615 | instructions are done left first or right first. | |
1616 | (do_{long,2_short,parallel}): Indicate in the machine state which | |
1617 | type of instruction this is. Count each of the types of | |
1618 | instructions executed. | |
1619 | (sim_size): Only print the memory sizes if DEBUG_MEMSIZE debug | |
1620 | flag is set. | |
1621 | (sim_resume): Pass left/right indication to do_2_short. | |
1622 | (all functions): Change printf calls to use the printf_filtered | |
1623 | function in the callback table. | |
1624 | (sim_trace): Turn on debug flag if DEBUG was defined, and call | |
1625 | sim_resume. | |
1626 | (sim_info): Print out statistics on instructions. | |
1627 | (sim_{trace,create_inferior}): Eliminate extraneous output unless | |
1628 | debugging. | |
1629 | (sim_open): If args == -t and DEBUG was defined, set d10v_debug. | |
1630 | Only initialize the hash table the first time sim_open is called. | |
1631 | ||
1632 | * Makefile.in: Make objects depend on d10v_sim.h. | |
1633 | ({,SIM_}CFLAGS): Include configure dependent switches. Setting | |
1634 | CFLAGS does not override host/target defines or SIM_CFLAGS. | |
1635 | (CC_FOR_BUILD,gencode): Use CC_FOR_BUILD to compile gencode. | |
1636 | (run): By default, the math library is not needed to be linked | |
1637 | in. | |
1638 | ({BFD,LIBIBERTY}_LIB): Define as variables so they can be | |
1639 | overridden. | |
1640 | (VPATH): Don't set to anything but @srcdir@ to work with non-GNU | |
1641 | makes. | |
1642 | ({run,callback}.o): Provide explicit paths to their appropriate | |
1643 | source directories. | |
1644 | (gencode{,.o},d10v-opc.o): Split compilation into creating object | |
1645 | and linking. Instead of linking in libopcodes.a, just compile | |
1646 | d10v-opc.o directly to handle canadian cross. | |
1647 | (CSEARCH): Add opcodes directory. | |
1648 | ||
1649 | * configure.in (--enable-sim-cflags): New switch to allow user to | |
1650 | set the defaults. | |
1651 | (CC_FOR_BUILD): Deal with canadian crosses. | |
1652 | * configure: Regenerate. | |
1653 | ||
1654 | Wed Sep 04 04:45:34 1996 Mark Alexander <marka@cygnus.com> | |
1655 | ||
1656 | * simops.c: Include correct syscall.h for d10v, not host's. | |
1657 | Fix #ifdef SYS_stat. | |
1658 | ||
1659 | Tue Sep 3 14:00:04 1996 Michael Meissner <meissner@tiktok.cygnus.com> | |
1660 | ||
1661 | * simops.c (OP_5F00): Wrap all SYS_xxx traps with #ifdef. | |
1662 | Add trap 2 to be printf and trap 3 to be putchar. | |
1663 | ||
1664 | Wed Aug 28 21:42:34 1996 Mark Alexander <marka@cygnus.com> | |
1665 | ||
1666 | * Makefile.in, d10v_sim.h, interp.c, simops.c: Add support | |
1667 | for low-level system calls. | |
1668 | ||
1669 | Wed Aug 28 17:33:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com> | |
1670 | ||
1671 | * Makefile.in, d10v_sim.h, interp.c: Fix byte-order problems. | |
1672 | ||
1673 | Mon Aug 26 18:30:28 1996 Martin M. Hunt <hunt@pizza.cygnus.com> | |
1674 | ||
1675 | * d10v_sim.h (SEXT32): Added. | |
1676 | * interp.c: Commented out printfs. | |
72f4393d | 1677 | * simops.c: Fixed error in sb and st2w. |
c906108c SS |
1678 | |
1679 | Thu Aug 15 13:30:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com> | |
1680 | ||
1681 | * Makefile.in, d10v_sim.h, interp.c, simops.c: Added remaining | |
1682 | DSP instructions. Added modulo addressing. | |
1683 | ||
1684 | Sun Aug 11 12:57:15 1996 Martin M. Hunt <hunt@pizza.cygnus.com> | |
1685 | ||
1686 | * Makefile.in, d10v_sim.h, interp.c, simops.c: Snapshot. | |
1687 | ||
1688 | Fri Aug 2 17:44:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com> | |
1689 | ||
1690 | * d10v_sim.h, simops.c: Snapshot. | |
1691 | ||
1692 | Thu Aug 1 17:05:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com> | |
1693 | ||
72f4393d | 1694 | * ChangeLog, Makefile.in, configure, configure.in, d10v_sim.h, |
c906108c SS |
1695 | gencode.c, interp.c, simops.c: Created. |
1696 |