Commit | Line | Data |
---|---|---|
5c887dd5 JB |
1 | 2017-09-06 John Baldwin <jhb@FreeBSD.org> |
2 | ||
3 | * configure: Regenerate. | |
4 | ||
91588b3a MF |
5 | 2016-11-11 Mike Frysinger <vapier@gentoo.org> |
6 | ||
6cb2202b | 7 | PR sim/20808 |
91588b3a MF |
8 | * dv-tx3904cpu.c (deliver_tx3904cpu_interrupt): Define CPU to cpu |
9 | and SD to sd. | |
10 | ||
e04659e8 MF |
11 | 2016-11-11 Mike Frysinger <vapier@gentoo.org> |
12 | ||
6cb2202b | 13 | PR sim/20809 |
e04659e8 MF |
14 | * mips.igen (check_u64): Enable for `r3900'. |
15 | ||
1554f758 MF |
16 | 2016-02-05 Mike Frysinger <vapier@gentoo.org> |
17 | ||
18 | * configure.ac (sim_engine_run): Change sd->base.prog_bfd to | |
19 | STATE_PROG_BFD (sd). | |
20 | * configure: Regenerate. | |
21 | ||
3d304f48 AB |
22 | 2016-01-18 Andrew Bennett <andrew.bennett@imgtec.com> |
23 | Maciej W. Rozycki <macro@imgtec.com> | |
24 | ||
25 | PR sim/19441 | |
26 | * micromips.igen (delayslot_micromips): Enable for `micromips32', | |
27 | `micromips64' and `micromipsdsp' only. | |
28 | (process_isa_mode): Enable for `micromips32' and `micromips64' only. | |
29 | (do_micromips_jalr, do_micromips_jal): Likewise. | |
30 | (compute_movep_src_reg): Likewise. | |
31 | (compute_andi16_imm): Likewise. | |
32 | (convert_fmt_micromips): Likewise. | |
33 | (convert_fmt_micromips_cvt_d): Likewise. | |
34 | (convert_fmt_micromips_cvt_s): Likewise. | |
35 | (FMT_MICROMIPS): Likewise. | |
36 | (FMT_MICROMIPS_CVT_D): Likewise. | |
37 | (FMT_MICROMIPS_CVT_S): Likewise. | |
38 | ||
b36d953b MF |
39 | 2016-01-12 Mike Frysinger <vapier@gentoo.org> |
40 | ||
41 | * interp.c: Include elf-bfd.h. | |
42 | (sim_create_inferior): Truncate pc to 32-bits when EI_CLASS is | |
43 | ELFCLASS32. | |
44 | ||
ce39bd38 MF |
45 | 2016-01-10 Mike Frysinger <vapier@gentoo.org> |
46 | ||
47 | * config.in, configure: Regenerate. | |
48 | ||
99d8e879 MF |
49 | 2016-01-10 Mike Frysinger <vapier@gentoo.org> |
50 | ||
51 | * configure: Regenerate. | |
52 | ||
35656e95 MF |
53 | 2016-01-10 Mike Frysinger <vapier@gentoo.org> |
54 | ||
55 | * configure: Regenerate. | |
56 | ||
16f7876d MF |
57 | 2016-01-10 Mike Frysinger <vapier@gentoo.org> |
58 | ||
59 | * configure: Regenerate. | |
60 | ||
e19418e0 MF |
61 | 2016-01-10 Mike Frysinger <vapier@gentoo.org> |
62 | ||
63 | * configure: Regenerate. | |
64 | ||
6d90347b MF |
65 | 2016-01-10 Mike Frysinger <vapier@gentoo.org> |
66 | ||
67 | * configure.ac (SIM_AC_OPTION_SMP): Delete call. | |
68 | * configure: Regenerate. | |
69 | ||
347fe5bb MF |
70 | 2016-01-10 Mike Frysinger <vapier@gentoo.org> |
71 | ||
72 | * configure.ac (SIM_AC_OPTION_INLINE): Delete call. | |
73 | * configure: Regenerate. | |
74 | ||
22be3fbe MF |
75 | 2016-01-10 Mike Frysinger <vapier@gentoo.org> |
76 | ||
77 | * configure: Regenerate. | |
78 | ||
0dc73ef7 MF |
79 | 2016-01-10 Mike Frysinger <vapier@gentoo.org> |
80 | ||
81 | * configure: Regenerate. | |
82 | ||
936df756 MF |
83 | 2016-01-09 Mike Frysinger <vapier@gentoo.org> |
84 | ||
85 | * config.in, configure: Regenerate. | |
86 | ||
2e3d4f4d MF |
87 | 2016-01-06 Mike Frysinger <vapier@gentoo.org> |
88 | ||
89 | * interp.c (sim_open): Mark argv const. | |
90 | (sim_create_inferior): Mark argv and env const. | |
91 | ||
9bbf6f91 MF |
92 | 2016-01-04 Mike Frysinger <vapier@gentoo.org> |
93 | ||
94 | * configure: Regenerate. | |
95 | ||
77cf2ef5 MF |
96 | 2016-01-03 Mike Frysinger <vapier@gentoo.org> |
97 | ||
98 | * interp.c (sim_open): Update sim_parse_args comment. | |
99 | ||
0cb8d851 MF |
100 | 2016-01-03 Mike Frysinger <vapier@gentoo.org> |
101 | ||
102 | * configure.ac (SIM_AC_OPTION_HOSTENDIAN): Delete. | |
103 | * configure: Regenerate. | |
104 | ||
1ac72f06 MF |
105 | 2016-01-02 Mike Frysinger <vapier@gentoo.org> |
106 | ||
107 | * configure.ac (mips_endian): Change LITTLE_ENDIAN to LITTLE. | |
108 | (default_endian): Likewise. Change BIG_ENDIAN to BIG. | |
109 | * configure: Regenerate. | |
110 | * sim-main.h (BigEndianMem): Change BIG_ENDIAN to BFD_ENDIAN_BIG. | |
111 | ||
d47f5b30 MF |
112 | 2016-01-02 Mike Frysinger <vapier@gentoo.org> |
113 | ||
114 | * dv-tx3904cpu.c (CPU, SD): Delete. | |
115 | ||
e1211e55 MF |
116 | 2015-12-30 Mike Frysinger <vapier@gentoo.org> |
117 | ||
118 | * wrapper.c (mips_reg_store, mips_reg_fetch): Define. | |
119 | (sim_open): Call CPU_REG_FETCH/CPU_REG_STORE. | |
120 | (sim_store_register): Rename to ... | |
121 | (mips_reg_store): ... this. Delete local cpu var. | |
122 | Update sim_io_eprintf calls. | |
123 | (sim_fetch_register): Rename to ... | |
124 | (mips_reg_fetch): ... this. Delete local cpu var. | |
125 | Update sim_io_eprintf calls. | |
126 | ||
5e744ef8 MF |
127 | 2015-12-27 Mike Frysinger <vapier@gentoo.org> |
128 | ||
129 | * Makefile.in (SIM_OBJS): Delete sim-hload.o. | |
130 | ||
1b393626 MF |
131 | 2015-12-26 Mike Frysinger <vapier@gentoo.org> |
132 | ||
133 | * config.in, configure: Regenerate. | |
134 | ||
26f8bf63 MF |
135 | 2015-12-26 Mike Frysinger <vapier@gentoo.org> |
136 | ||
137 | * interp.c (sim_write, sim_read): Delete. | |
138 | (store_word): Delete call to AddressTranslation and set paddr=vaddr. | |
139 | (load_word): Likewise. | |
140 | * micromips.igen (cache): Likewise. | |
141 | * mips.igen (do_ll, do_lld, do_sc, do_scd, do_suxc1_32, do_swc1, | |
142 | do_swxc1, cache, do_load, do_load_left, do_load_right, do_store, | |
143 | do_store_left, do_store_right, do_load_double, do_store_double): | |
144 | Likewise. | |
145 | (do_pref): Delete call to AddressTranslation and stub out Prefetch. | |
146 | (do_prefx): Likewise. | |
147 | * sim-main.c (address_translation, prefetch): Delete. | |
148 | (ifetch32, ifetch16): Delete call to AddressTranslation and set | |
149 | paddr=vaddr. | |
150 | * sim-main.h (Uncached, CachedNoncoherent, CachedCoherent, Cached, | |
151 | address_translation, AddressTranslation, prefetch, Prefetch): Delete. | |
152 | (LoadMemory, StoreMemory): Delete CCA arg. | |
153 | ||
ef04e371 MF |
154 | 2015-12-24 Mike Frysinger <vapier@gentoo.org> |
155 | ||
156 | * configure.ac (SIM_SUBTARGET): Drop -DTARGET_TX3904=1. | |
157 | * configure: Regenerated. | |
158 | ||
cb379ede MF |
159 | 2015-12-24 Mike Frysinger <vapier@gentoo.org> |
160 | ||
161 | * sim-main.h (SIM_QUIET_NAN_NEGATED): Move from tconfig.h. | |
162 | * tconfig.h: Delete. | |
163 | ||
26936211 MF |
164 | 2015-12-24 Mike Frysinger <vapier@gentoo.org> |
165 | ||
166 | * tconfig.h (SIM_HANDLES_LMA): Delete. | |
167 | ||
84e8e361 MF |
168 | 2015-12-24 Mike Frysinger <vapier@gentoo.org> |
169 | ||
170 | * sim-main.h (WITH_WATCHPOINTS): Delete. | |
171 | ||
3cabaf66 MF |
172 | 2015-12-24 Mike Frysinger <vapier@gentoo.org> |
173 | ||
174 | * interp.c [SIM_HAVE_FLATMEM] (sim_open): Delete flatmem code. | |
175 | ||
8abe6c66 MF |
176 | 2015-12-24 Mike Frysinger <vapier@gentoo.org> |
177 | ||
178 | * tconfig.h (SIM_HAVE_SIMCACHE): Delete. | |
179 | ||
1d19cae7 DV |
180 | 2015-12-15 Dominik Vogt <vogt@linux.vnet.ibm.com> |
181 | ||
182 | * micromips.igen (process_isa_mode): Fix left shift of negative | |
183 | value. | |
184 | ||
cdf850e9 MF |
185 | 2015-11-17 Mike Frysinger <vapier@gentoo.org> |
186 | ||
187 | * sim-main.h (WITH_MODULO_MEMORY): Delete. | |
188 | ||
797eee42 MF |
189 | 2015-11-15 Mike Frysinger <vapier@gentoo.org> |
190 | ||
191 | * Makefile.in (SIM_OBJS): Delete sim-reason.o and sim-stop.o. | |
192 | ||
6e4f085c MF |
193 | 2015-11-14 Mike Frysinger <vapier@gentoo.org> |
194 | ||
195 | * interp.c (sim_close): Rename to ... | |
196 | (mips_sim_close): ... this. Delete calls to sim_module_uninstall and | |
197 | sim_io_shutdown. | |
198 | * sim-main.h (mips_sim_close): Declare. | |
199 | (SIM_CLOSE_HOOK): Define. | |
200 | ||
8e394ffc AB |
201 | 2015-09-25 Andrew Bennett <andrew.bennett@imgtec.com> |
202 | Ali Lown <ali.lown@imgtec.com> | |
203 | ||
204 | * Makefile.in (tmp-micromips): New rule. | |
205 | (tmp-mach-multi): Add support for micromips. | |
206 | * configure.ac (mips*-sde-elf* | mips*-mti-elf*): Made a multi sim | |
207 | that works for both mips64 and micromips64. | |
208 | (mipsisa32r2*-*-*): Made a multi sim that works for mips32 and | |
209 | micromips32. | |
210 | Add build support for micromips. | |
211 | * dsp.igen (do_ph_s_absq, do_w_s_absq, do_qb_s_absq, do_addsc, | |
212 | do_addwc, do_bitrev, do_extpv, do_extrv, do_extrv_s_h, do_insv, | |
213 | do_lxx do_modsub, do_mthlip, do_mulsaq_s_w_ph, do_ph_packrl, do_qb_pick | |
214 | do_ph_pick, do_qb_ph_precequ, do_qb_ph_preceu, do_w_preceq | |
215 | do_w_ph_precrq, do_ph_qb_precrq, do_w_ph_rs_precrq do_qb_w_raddu, | |
216 | do_rddsp, do_repl, do_shilov, do_ph_shl, do_qb_shl do_w_s_shllv, | |
217 | do_ph_shrlv, do_w_r_shrav, do_wrdsp, do_qb_shrav, do_append, | |
218 | do_balign, do_ph_w_mulsa, do_ph_qb_precr, do_prepend): New functions. | |
219 | Refactored instruction code to use these functions. | |
220 | * dsp2.igen: Refactored instruction code to use the new functions. | |
221 | * interp.c (decode_coproc): Refactored to work with any instruction | |
222 | encoding. | |
223 | (isa_mode): New variable | |
224 | (RSVD_INSTRUCTION): Changed to 0x00000039. | |
225 | * m16.igen (BREAK16): Refactored instruction to use do_break16. | |
226 | (JALX32): Add mips32, mips64, mips32r2 and mips64r2 models. | |
227 | * micromips.dc: New file. | |
228 | * micromips.igen: New file. | |
229 | * micromips16.dc: New file. | |
230 | * micromipsdsp.igen: New file. | |
231 | * micromipsrun.c: New file. | |
232 | * mips.igen (do_swc1): Changed to work with any instruction encoding. | |
233 | (do_add do_addi do_andi do_dadd do_daddi do_dsll32 do_dsra32 | |
234 | do_dsrl32, do_dsub, do_break, do_break16, do_clo, do_clz, do_dclo, | |
235 | do_dclz, do_lb, do_lh, do_lwr, do_lwl, do_lwc, do_lw, do_lwu, do_lhu, | |
236 | do_ldc, do_lbu, do_ll, do_lld, do_lui, do_madd, do_dsp_madd, do_maddu, | |
237 | do_dsp_maddu, do_dsp_mfhi, do_dsp_mflo, do_movn, do_movz, do_msub, | |
238 | do_dsp_msub, do_msubu, do_dsp_msubu, do_mthi, do_dsp_mthi, do_mtlo, | |
239 | do_dsp_mtlo, do_mul, do_dsp_mult, do_dsp_multu, do_pref, do_sc, | |
240 | do_scd, do_sub, do_sw, do_teq, do_teqi, do_tge, do_tgei, do_tgeiu, | |
241 | do_tgeu, do_tlt do_tlti, do_tltiu, do_tltu, do_tne, do_tnei, do_abs_fmt, | |
242 | do_add_fmt, do_alnv_ps, do_c_cond_fmt, do_ceil_fmt, do_cfc1, do_ctc1, | |
243 | do_cvt_d_fmt, do_cvt_l_fmt, do_cvt_ps_s, do_cvt_s_fmt, do_cvt_s_pl, | |
244 | do_cvt_s_pu, do_cvt_w_fmt, do_div_fmt, do_dmfc1b, do_dmtc1b, do_floor_fmt, | |
245 | do_luxc1_32, do_luxc1_64, do_lwc1, do_lwxc1, do_madd_fmt, do_mfc1b, | |
246 | do_mov_fmt, do_movtf, do_movtf_fmt, do_movn_fmt, do_movz_fmt, do_msub_fmt, | |
247 | do_mtc1b, do_mul_fmt, do_neg_fmt, do_nmadd_fmt, do_nmsub_fmt, do_pll_ps, | |
248 | do_plu_ps, do_pul_ps, do_puu_ps, do_recip_fmt, do_round_fmt, do_rsqrt_fmt, | |
249 | do_prefx, do_sdc1, do_suxc1_32, do_suxc1_64, do_sqrt_fmt, do_sub_fmt, | |
250 | do_swc1, do_swxc1, do_trunc_fmt): New functions, refactored from existing | |
251 | instructions. | |
252 | Refactored instruction code to use these functions. | |
253 | (RSVD): Changed to use new reserved instruction. | |
254 | (loadstore_ea, not_word_value, unpredictable, check_mt_hilo, | |
255 | check_mf_hilo, check_mult_hilo, check_div_hilo, check_u64, do_luxc1_32, | |
256 | do_sdc1, do_suxc1_32, check_fmt_p, check_fpu, do_load_double, | |
257 | do_store_double): Added micromips32 and micromips64 models. | |
258 | Added include for micromips.igen and micromipsdsp.igen | |
259 | Add micromips32 and micromips64 models. | |
260 | (DecodeCoproc): Updated to use new macro definition. | |
261 | * mips3264r2.igen (do_dsbh, do_dshd, do_dext, do_dextm, do_dextu, do_di, | |
262 | do_dins, do_dinsm, do_ei, do_ext, do_mfhc1, do_mthc1, do_ins, do_dinsu, | |
263 | do_seb, do_seh do_rdhwr, do_wsbh): New functions. | |
264 | Refactored instruction code to use these functions. | |
265 | * sim-main.h (CP0_operation): New enum. | |
266 | (DecodeCoproc): Updated macro. | |
267 | (IMEM32_MICROMIPS, IMEM16_MICROMIPS, MICROMIPS_MINOR_OPCODE, | |
268 | MICROMIPS_DELAYSLOT_SIZE_ANY, MICROMIPS_DELAYSLOT_SIZE_16, | |
269 | MICROMIPS_DELAYSLOT_SIZE_32, ISA_MODE_MIPS32 and | |
270 | ISA_MODE_MICROMIPS): New defines. | |
271 | (sim_state): Add isa_mode field. | |
272 | ||
8d0978fb MF |
273 | 2015-06-23 Mike Frysinger <vapier@gentoo.org> |
274 | ||
275 | * configure: Regenerate. | |
276 | ||
306f4178 MF |
277 | 2015-06-12 Mike Frysinger <vapier@gentoo.org> |
278 | ||
279 | * configure.ac: Change configure.in to configure.ac. | |
280 | * configure: Regenerate. | |
281 | ||
a3487082 MF |
282 | 2015-06-12 Mike Frysinger <vapier@gentoo.org> |
283 | ||
284 | * configure: Regenerate. | |
285 | ||
29bc024d MF |
286 | 2015-06-12 Mike Frysinger <vapier@gentoo.org> |
287 | ||
288 | * interp.c [TRACE]: Delete. | |
289 | (TRACE): Change to WITH_TRACE_ANY_P. | |
290 | [!WITH_TRACE_ANY_P] (open_trace): Define. | |
291 | (mips_option_handler, open_trace, sim_close, dotrace): | |
292 | Change defined(TRACE) to WITH_TRACE_ANY_P. | |
293 | (sim_open): Delete TRACE ifdef check. | |
294 | * sim-main.c (load_memory): Delete TRACE ifdef check. | |
295 | (store_memory): Likewise. | |
296 | * sim-main.h [WITH_TRACE_ANY_P] (dotrace, tracefh): Protect decls. | |
297 | [!WITH_TRACE_ANY_P] (dotrace): Define. | |
298 | ||
3ebe2863 MF |
299 | 2015-04-18 Mike Frysinger <vapier@gentoo.org> |
300 | ||
301 | * sim-main.h (SIM_ENGINE_HALT_HOOK, SIM_ENGINE_RESTART_HOOK): Delete | |
302 | comments. | |
303 | ||
20bca71d MF |
304 | 2015-04-18 Mike Frysinger <vapier@gentoo.org> |
305 | ||
306 | * sim-main.h (SIM_CPU): Delete. | |
307 | ||
7e83aa92 MF |
308 | 2015-04-18 Mike Frysinger <vapier@gentoo.org> |
309 | ||
310 | * sim-main.h (sim_cia): Delete. | |
311 | ||
034685f9 MF |
312 | 2015-04-17 Mike Frysinger <vapier@gentoo.org> |
313 | ||
314 | * dv-tx3904cpu.c (deliver_tx3904cpu_interrupt): Change CIA_GET to | |
315 | PU_PC_GET. | |
316 | * interp.c (interrupt_event): Change CIA_GET to CPU_PC_GET. | |
317 | (sim_create_inferior): Change CIA_SET to CPU_PC_SET. | |
318 | * m16run.c (sim_engine_run): Change CIA_GET to CPU_PC_GET and | |
319 | CIA_SET to CPU_PC_SET. | |
320 | * sim-main.h (CIA_GET, CIA_SET): Delete. | |
321 | ||
78e9aa70 MF |
322 | 2015-04-15 Mike Frysinger <vapier@gentoo.org> |
323 | ||
324 | * Makefile.in (SIM_OBJS): Delete sim-cpu.o. | |
325 | * sim-main.h (STATE_CPU): Delete. | |
326 | ||
bf12d44e MF |
327 | 2015-04-13 Mike Frysinger <vapier@gentoo.org> |
328 | ||
329 | * configure: Regenerate. | |
330 | ||
7bebb329 MF |
331 | 2015-04-13 Mike Frysinger <vapier@gentoo.org> |
332 | ||
333 | * Makefile.in (SIM_OBJS): Add sim-cpu.o. | |
334 | * interp.c (mips_pc_get, mips_pc_set): New functions. | |
335 | (sim_open): Declare new local var i. Call sim_cpu_alloc_all. | |
336 | Call CPU_PC_FETCH & CPU_PC_STORE for all cpus. | |
337 | (sim_pc_get): Delete. | |
338 | * sim-main.h (SIM_CPU): Define. | |
339 | (struct sim_state): Change cpu to an array of pointers. | |
340 | (STATE_CPU): Drop &. | |
341 | ||
8ac57fbd MF |
342 | 2015-04-13 Mike Frysinger <vapier@gentoo.org> |
343 | ||
344 | * interp.c (mips_option_handler, open_trace, sim_close, | |
345 | sim_write, sim_read, sim_store_register, sim_fetch_register, | |
346 | sim_create_inferior, pr_addr, pr_uword64): Convert old style | |
347 | prototypes. | |
348 | (sim_open): Convert old style prototype. Change casts with | |
349 | sim_write to unsigned char *. | |
350 | (fetch_str): Change null to unsigned char, and change cast to | |
351 | unsigned char *. | |
352 | (sim_monitor): Change c & ch to unsigned char. Change cast to | |
353 | unsigned char *. | |
354 | ||
e787f858 MF |
355 | 2015-04-12 Mike Frysinger <vapier@gentoo.org> |
356 | ||
357 | * Makefile.in (SIM_OBJS): Move interp.o to the start of the list. | |
358 | ||
122bbfb5 MF |
359 | 2015-04-06 Mike Frysinger <vapier@gentoo.org> |
360 | ||
361 | * Makefile.in (SIM_OBJS): Delete sim-engine.o. | |
362 | ||
0fe84f3f MF |
363 | 2015-04-01 Mike Frysinger <vapier@gentoo.org> |
364 | ||
365 | * tconfig.h (SIM_HAVE_PROFILE): Delete. | |
366 | ||
aadc9410 MF |
367 | 2015-03-31 Mike Frysinger <vapier@gentoo.org> |
368 | ||
369 | * config.in, configure: Regenerate. | |
370 | ||
05f53ed6 MF |
371 | 2015-03-24 Mike Frysinger <vapier@gentoo.org> |
372 | ||
373 | * interp.c (sim_pc_get): New function. | |
374 | ||
c0931f26 MF |
375 | 2015-03-24 Mike Frysinger <vapier@gentoo.org> |
376 | ||
377 | * sim-main.h (SIM_HAVE_BIENDIAN): Delete. | |
378 | * tconfig.h (SIM_HAVE_BIENDIAN): Delete. | |
379 | ||
30452bbe MF |
380 | 2015-03-24 Mike Frysinger <vapier@gentoo.org> |
381 | ||
382 | * configure: Regenerate. | |
383 | ||
64dd13df MF |
384 | 2015-03-23 Mike Frysinger <vapier@gentoo.org> |
385 | ||
386 | * configure: Regenerate. | |
387 | ||
49cd1634 MF |
388 | 2015-03-23 Mike Frysinger <vapier@gentoo.org> |
389 | ||
390 | * configure: Regenerate. | |
391 | * configure.ac (mips_extra_objs): Delete. | |
392 | * Makefile.in (MIPS_EXTRA_OBJS): Delete. | |
393 | (SIM_OBJS): Delete MIPS_EXTRA_OBJS. | |
394 | ||
3649cb06 MF |
395 | 2015-03-23 Mike Frysinger <vapier@gentoo.org> |
396 | ||
397 | * configure: Regenerate. | |
398 | * configure.ac: Delete sim_hw checks for dv-sockser. | |
399 | ||
ae7d0cac MF |
400 | 2015-03-16 Mike Frysinger <vapier@gentoo.org> |
401 | ||
402 | * config.in, configure: Regenerate. | |
403 | * tconfig.in: Rename file ... | |
404 | * tconfig.h: ... here. | |
405 | ||
8406bb59 MF |
406 | 2015-03-15 Mike Frysinger <vapier@gentoo.org> |
407 | ||
408 | * tconfig.in: Delete includes. | |
409 | [HAVE_DV_SOCKSER]: Delete. | |
410 | ||
465fb143 MF |
411 | 2015-03-14 Mike Frysinger <vapier@gentoo.org> |
412 | ||
413 | * Makefile.in (SIM_RUN_OBJS): Delete. | |
414 | ||
5cddc23a MF |
415 | 2015-03-14 Mike Frysinger <vapier@gentoo.org> |
416 | ||
417 | * configure.ac (AC_CHECK_HEADERS): Delete. | |
418 | * aclocal.m4, configure: Regenerate. | |
419 | ||
2974be62 AM |
420 | 2014-08-19 Alan Modra <amodra@gmail.com> |
421 | ||
422 | * configure: Regenerate. | |
423 | ||
faa743bb RM |
424 | 2014-08-15 Roland McGrath <mcgrathr@google.com> |
425 | ||
426 | * configure: Regenerate. | |
427 | * config.in: Regenerate. | |
428 | ||
1a8a700e MF |
429 | 2014-03-04 Mike Frysinger <vapier@gentoo.org> |
430 | ||
431 | * configure: Regenerate. | |
432 | ||
bf3d9781 AM |
433 | 2013-09-23 Alan Modra <amodra@gmail.com> |
434 | ||
435 | * configure: Regenerate. | |
436 | ||
31e6ad7d MF |
437 | 2013-06-03 Mike Frysinger <vapier@gentoo.org> |
438 | ||
439 | * aclocal.m4, configure: Regenerate. | |
440 | ||
d3685d60 TT |
441 | 2013-05-10 Freddie Chopin <freddie_chopin@op.pl> |
442 | ||
443 | * configure: Rebuild. | |
444 | ||
1517bd27 MF |
445 | 2013-03-26 Mike Frysinger <vapier@gentoo.org> |
446 | ||
447 | * configure: Regenerate. | |
448 | ||
3be31516 JS |
449 | 2013-03-23 Joel Sherrill <joel.sherrill@oarcorp.com> |
450 | ||
451 | * configure.ac: Address use of dv-sockser.o. | |
452 | * tconfig.in: Conditionalize use of dv_sockser_install. | |
453 | * configure: Regenerated. | |
454 | * config.in: Regenerated. | |
455 | ||
37cb8f8e SE |
456 | 2012-10-04 Chao-ying Fu <fu@mips.com> |
457 | Steve Ellcey <sellcey@mips.com> | |
458 | ||
459 | * mips/mips3264r2.igen (rdhwr): New. | |
460 | ||
87c8644f JS |
461 | 2012-09-03 Joel Sherrill <joel.sherrill@oarcorp.com> |
462 | ||
463 | * configure.ac: Always link against dv-sockser.o. | |
464 | * configure: Regenerate. | |
465 | ||
5f3ef9d0 JB |
466 | 2012-06-15 Joel Brobecker <brobecker@adacore.com> |
467 | ||
468 | * config.in, configure: Regenerate. | |
469 | ||
a6ff997c NC |
470 | 2012-05-18 Nick Clifton <nickc@redhat.com> |
471 | ||
472 | PR 14072 | |
473 | * interp.c: Include config.h before system header files. | |
474 | ||
2232061b MF |
475 | 2012-03-24 Mike Frysinger <vapier@gentoo.org> |
476 | ||
477 | * aclocal.m4, config.in, configure: Regenerate. | |
478 | ||
db2e4d67 MF |
479 | 2011-12-03 Mike Frysinger <vapier@gentoo.org> |
480 | ||
481 | * aclocal.m4: New file. | |
482 | * configure: Regenerate. | |
483 | ||
4399a56b MF |
484 | 2011-10-19 Mike Frysinger <vapier@gentoo.org> |
485 | ||
486 | * configure: Regenerate after common/acinclude.m4 update. | |
487 | ||
9c082ca8 MF |
488 | 2011-10-17 Mike Frysinger <vapier@gentoo.org> |
489 | ||
490 | * configure.ac: Change include to common/acinclude.m4. | |
491 | ||
6ffe910a MF |
492 | 2011-10-17 Mike Frysinger <vapier@gentoo.org> |
493 | ||
494 | * configure.ac: Change AC_PREREQ to 2.64. Delete AC_CONFIG_HEADER | |
495 | call. Replace common.m4 include with SIM_AC_COMMON. | |
496 | * configure: Regenerate. | |
497 | ||
31b28250 HPN |
498 | 2011-07-08 Hans-Peter Nilsson <hp@axis.com> |
499 | ||
3faa01e3 HPN |
500 | * Makefile.in ($(SIM_MULTI_OBJ)): Depend on sim-main.h |
501 | $(SIM_EXTRA_DEPS). | |
502 | (tmp-mach-multi): Exit early when igen fails. | |
31b28250 | 503 | |
2419798b MF |
504 | 2011-07-05 Mike Frysinger <vapier@gentoo.org> |
505 | ||
506 | * interp.c (sim_do_command): Delete. | |
507 | ||
d79fe0d6 MF |
508 | 2011-02-14 Mike Frysinger <vapier@gentoo.org> |
509 | ||
510 | * dv-tx3904sio.c (tx3904sio_fifo_push): Change zfree to free. | |
511 | (tx3904sio_fifo_reset): Likewise. | |
512 | * interp.c (sim_monitor): Likewise. | |
513 | ||
5558e7e6 MF |
514 | 2010-04-14 Mike Frysinger <vapier@gentoo.org> |
515 | ||
516 | * interp.c (sim_write): Add const to buffer arg. | |
517 | ||
35aafff4 JB |
518 | 2010-01-18 Masaki Muranaka <monaka@monami-software.com> (tiny change) |
519 | ||
520 | * interp.c: Don't include sysdep.h | |
521 | ||
3725885a RW |
522 | 2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
523 | ||
524 | * configure: Regenerate. | |
525 | ||
d6416cdc RW |
526 | 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
527 | ||
81ecdfbb RW |
528 | * config.in: Regenerate. |
529 | * configure: Likewise. | |
530 | ||
d6416cdc RW |
531 | * configure: Regenerate. |
532 | ||
b5bd9624 HPN |
533 | 2008-07-11 Hans-Peter Nilsson <hp@axis.com> |
534 | ||
535 | * configure: Regenerate to track ../common/common.m4 changes. | |
536 | * config.in: Ditto. | |
537 | ||
6efef468 | 538 | 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> |
72f4393d L |
539 | Daniel Jacobowitz <dan@codesourcery.com> |
540 | Joseph Myers <joseph@codesourcery.com> | |
6efef468 JM |
541 | |
542 | * configure: Regenerate. | |
543 | ||
60dc88db RS |
544 | 2007-10-22 Richard Sandiford <rsandifo@nildram.co.uk> |
545 | ||
546 | * mips.igen (check_fmt_p): Provide a separate mips32r2 definition | |
547 | that unconditionally allows fmt_ps. | |
548 | (ALNV.PS, CEIL.L.fmt, CVT.L.fmt, CVT.PS.S, CVT.S.PL, CVT.S.PU) | |
549 | (FLOOR.L.fmt, LWXC1, MADD.fmt, MSUB.fmt, NMADD.fmt, NMSUB.fmt) | |
550 | (PLL.PS, PLU.PS, PUL.PS, PUU.PS, ROUND.L.fmt, TRUNC.L.fmt): Change | |
551 | filter from 64,f to 32,f. | |
552 | (PREFX): Change filter from 64 to 32. | |
553 | (LDXC1, LUXC1): Provide separate mips32r2 implementations | |
554 | that use do_load_double instead of do_load. Make both LUXC1 | |
555 | versions unpredictable if SizeFGR () != 64. | |
556 | (SDXC1, SUXC1): Extend to mips32r2, using do_store_double | |
557 | instead of do_store. Remove unused variable. Make both SUXC1 | |
558 | versions unpredictable if SizeFGR () != 64. | |
559 | ||
599ca73e RS |
560 | 2007-10-07 Richard Sandiford <rsandifo@nildram.co.uk> |
561 | ||
562 | * mips.igen (ll): Fix mask for WITH_TARGET_WORD_BITSIZE == 32. | |
563 | (sc, swxc1): Likewise. Also fix big-endian and reverse-endian | |
564 | shifts for that case. | |
565 | ||
2525df03 NC |
566 | 2007-09-04 Nick Clifton <nickc@redhat.com> |
567 | ||
568 | * interp.c (options enum): Add OPTION_INFO_MEMORY. | |
569 | (display_mem_info): New static variable. | |
570 | (mips_option_handler): Handle OPTION_INFO_MEMORY. | |
571 | (mips_options): Add info-memory and memory-info. | |
572 | (sim_open): After processing the command line and board | |
573 | specification, check display_mem_info. If it is set then | |
574 | call the real handler for the --memory-info command line | |
575 | switch. | |
576 | ||
35ee6e1e JB |
577 | 2007-08-24 Joel Brobecker <brobecker@adacore.com> |
578 | ||
579 | * configure.ac: Change license of multi-run.c to GPL version 3. | |
580 | * configure: Regenerate. | |
581 | ||
d5fb0879 RS |
582 | 2007-06-28 Richard Sandiford <richard@codesourcery.com> |
583 | ||
584 | * configure.ac, configure: Revert last patch. | |
585 | ||
2a2ce21b RS |
586 | 2007-06-26 Richard Sandiford <richard@codesourcery.com> |
587 | ||
588 | * configure.ac (sim_mipsisa3264_configs): New variable. | |
589 | (mipsis32*-*-, mipsisa32r2*-*-*, mips64*-*-*, mips64r2*-*-*): Make | |
590 | every configuration support all four targets, using the triplet to | |
591 | determine the default. | |
592 | * configure: Regenerate. | |
593 | ||
efdcccc9 RS |
594 | 2007-06-25 Richard Sandiford <richard@codesourcery.com> |
595 | ||
0a7692b2 | 596 | * Makefile.in (m16run.o): New rule. |
efdcccc9 | 597 | |
f532a356 TS |
598 | 2007-05-15 Thiemo Seufer <ths@mips.com> |
599 | ||
600 | * mips3264r2.igen (DSHD): Fix compile warning. | |
601 | ||
bfe9c90b TS |
602 | 2007-05-14 Thiemo Seufer <ths@mips.com> |
603 | ||
604 | * mips.igen (ALNV.PS, CEIL.L.fmt, CVT.L.fmt, CVT.PS.S, CVT.S.PL, | |
605 | CVT.S.PU, FLOOR.L.fmt, LDXC1, LUXC1, LWXC1, MADD.fmt, MSUB.fmt, | |
606 | NMADD.fmt, NMSUB.fmt, PLL.PS, PLU.PS, PREFX, PUL.PS, PUU.PS, | |
607 | RECIP.fmt, ROUND.L.fmt, RSQRT.fmt, SWXC1, TRUNC.L.fmt): Add support | |
608 | for mips32r2. | |
609 | ||
53f4826b TS |
610 | 2007-03-01 Thiemo Seufer <ths@mips.com> |
611 | ||
612 | * mips.igen (MFHI, MFLO, MTHI, MTLO): Restore support for mips32 | |
613 | and mips64. | |
614 | ||
8bf3ddc8 TS |
615 | 2007-02-20 Thiemo Seufer <ths@mips.com> |
616 | ||
617 | * dsp.igen: Update copyright notice. | |
618 | * dsp2.igen: Fix copyright notice. | |
619 | ||
8b082fb1 | 620 | 2007-02-20 Thiemo Seufer <ths@mips.com> |
72f4393d | 621 | Chao-Ying Fu <fu@mips.com> |
8b082fb1 TS |
622 | |
623 | * Makefile.in (IGEN_INCLUDE): Add dsp2.igen. | |
624 | * configure.ac (mips*-sde-elf*, mipsisa32r2*-*-*, mipsisa64r2*-*-*): | |
625 | Add dsp2 to sim_igen_machine. | |
626 | * configure: Regenerate. | |
627 | * dsp.igen (do_ph_op): Add MUL support when op = 2. | |
628 | (do_ph_mulq): New function to support mulq_rs.ph and mulq_s.ph. | |
629 | (mulq_rs.ph): Use do_ph_mulq. | |
630 | (MFHI, MFLO, MTHI, MTLO): Move these instructions to mips.igen. | |
631 | * mips.igen: Add dsp2 model and include dsp2.igen. | |
632 | (MFHI, MFLO, MTHI, MTLO): Extend these instructions for | |
633 | for *mips32r2, *mips64r2, *dsp. | |
634 | (MADD, MADDU, MSUB, MSUBU, MULT, MULTU): Extend these instructions | |
635 | for *mips32r2, *mips64r2, *dsp2. | |
636 | * dsp2.igen: New file for MIPS DSP REV 2 ASE. | |
637 | ||
b1004875 | 638 | 2007-02-19 Thiemo Seufer <ths@mips.com> |
72f4393d | 639 | Nigel Stephens <nigel@mips.com> |
b1004875 TS |
640 | |
641 | * mips.igen (jalr.hb, jr.hb): Add decoder for mip32r2/mips64r2 | |
642 | jumps with hazard barrier. | |
643 | ||
f8df4c77 | 644 | 2007-02-19 Thiemo Seufer <ths@mips.com> |
72f4393d | 645 | Nigel Stephens <nigel@mips.com> |
f8df4c77 TS |
646 | |
647 | * interp.c (sim_monitor): Flush stdout and stderr file descriptors | |
648 | after each call to sim_io_write. | |
649 | ||
b1004875 | 650 | 2007-02-19 Thiemo Seufer <ths@mips.com> |
72f4393d | 651 | Nigel Stephens <nigel@mips.com> |
b1004875 TS |
652 | |
653 | * interp.c (ColdReset): Set CP0 Config0 to reflect the address size | |
654 | supported by this simulator. | |
07802d98 TS |
655 | (decode_coproc): Recognise additional CP0 Config registers |
656 | correctly. | |
657 | ||
14fb6c5a | 658 | 2007-02-19 Thiemo Seufer <ths@mips.com> |
72f4393d L |
659 | Nigel Stephens <nigel@mips.com> |
660 | David Ung <davidu@mips.com> | |
14fb6c5a TS |
661 | |
662 | * cp1.c (value_fpr): Don't inherit existing FPR_STATE for | |
663 | uninterpreted formats. If fmt is one of the uninterpreted types | |
664 | don't update the FPR_STATE. Handle fmt_uninterpreted_32 like | |
665 | fmt_word, and fmt_uninterpreted_64 like fmt_long. | |
666 | (store_fpr): When writing an invalid odd register, set the | |
667 | matching even register to fmt_unknown, not the following register. | |
668 | * interp.c (sim_open): If STATE_MEM_SIZE isn't set then set it to | |
669 | the the memory window at offset 0 set by --memory-size command | |
670 | line option. | |
671 | (sim_store_register): Handle storing 4 bytes to an 8 byte floating | |
672 | point register. | |
673 | (sim_fetch_register): Likewise for reading 4 bytes from an 8 byte | |
674 | register. | |
675 | (sim_monitor): When returning the memory size to the MIPS | |
676 | application, use the value in STATE_MEM_SIZE, not an arbitrary | |
677 | hardcoded value. | |
678 | (cop_lw): Don' mess around with FPR_STATE, just pass | |
679 | fmt_uninterpreted_32 to StoreFPR. | |
680 | (cop_sw): Similarly. | |
681 | (cop_ld): Pass fmt_uninterpreted_64 not fmt_uninterpreted. | |
682 | (cop_sd): Similarly. | |
683 | * mips.igen (not_word_value): Single version for mips32, mips64 | |
684 | and mips16. | |
685 | ||
c8847145 | 686 | 2007-02-19 Thiemo Seufer <ths@mips.com> |
72f4393d | 687 | Nigel Stephens <nigel@mips.com> |
c8847145 TS |
688 | |
689 | * interp.c (MEM_SIZE): Increase default memory size from 2 to 8 | |
690 | MBytes. | |
691 | ||
4b5d35ee TS |
692 | 2007-02-17 Thiemo Seufer <ths@mips.com> |
693 | ||
694 | * configure.ac (mips*-sde-elf*): Move in front of generic machine | |
695 | configuration. | |
696 | * configure: Regenerate. | |
697 | ||
3669427c TS |
698 | 2007-02-17 Thiemo Seufer <ths@mips.com> |
699 | ||
700 | * configure.ac (mips*-sde-elf*, mipsisa32r2*-*-*, mipsisa64r2*-*-*): | |
701 | Add mdmx to sim_igen_machine. | |
702 | (mipsisa64*-*-*): Likewise. Remove dsp. | |
703 | (mipsisa32*-*-*): Remove dsp. | |
704 | * configure: Regenerate. | |
705 | ||
109ad085 TS |
706 | 2007-02-13 Thiemo Seufer <ths@mips.com> |
707 | ||
708 | * configure.ac: Add mips*-sde-elf* target. | |
709 | * configure: Regenerate. | |
710 | ||
921d7ad3 HPN |
711 | 2006-12-21 Hans-Peter Nilsson <hp@axis.com> |
712 | ||
713 | * acconfig.h: Remove. | |
714 | * config.in, configure: Regenerate. | |
715 | ||
02f97da7 TS |
716 | 2006-11-07 Thiemo Seufer <ths@mips.com> |
717 | ||
718 | * dsp.igen (do_w_op): Fix compiler warning. | |
719 | ||
2d2733fc | 720 | 2006-08-29 Thiemo Seufer <ths@mips.com> |
72f4393d | 721 | David Ung <davidu@mips.com> |
2d2733fc TS |
722 | |
723 | * configure.ac (mipsisa32r2*-*-*, mipsisa32*-*-*): Add smartmips to | |
724 | sim_igen_machine. | |
725 | * configure: Regenerate. | |
726 | * mips.igen (model): Add smartmips. | |
727 | (MADDU): Increment ACX if carry. | |
728 | (do_mult): Clear ACX. | |
729 | (ROR,RORV): Add smartmips. | |
72f4393d | 730 | (include): Include smartmips.igen. |
2d2733fc TS |
731 | * sim-main.h (ACX): Set to REGISTERS[89]. |
732 | * smartmips.igen: New file. | |
733 | ||
d85c3a10 | 734 | 2006-08-29 Thiemo Seufer <ths@mips.com> |
72f4393d | 735 | David Ung <davidu@mips.com> |
d85c3a10 TS |
736 | |
737 | * Makefile.in (IGEN_INCLUDE): Add missing includes for m16e.igen and | |
738 | mips3264r2.igen. Add missing dependency rules. | |
739 | * m16e.igen: Support for mips16e save/restore instructions. | |
740 | ||
e85e3205 RE |
741 | 2006-06-13 Richard Earnshaw <rearnsha@arm.com> |
742 | ||
743 | * configure: Regenerated. | |
744 | ||
2f0122dc DJ |
745 | 2006-06-05 Daniel Jacobowitz <dan@codesourcery.com> |
746 | ||
747 | * configure: Regenerated. | |
748 | ||
20e95c23 DJ |
749 | 2006-05-31 Daniel Jacobowitz <dan@codesourcery.com> |
750 | ||
751 | * configure: Regenerated. | |
752 | ||
69088b17 CF |
753 | 2006-05-15 Chao-ying Fu <fu@mips.com> |
754 | ||
755 | * dsp.igen (do_ph_shift, do_w_shra): Fix bugs for rounding instructions. | |
756 | ||
0275de4e NC |
757 | 2006-04-18 Nick Clifton <nickc@redhat.com> |
758 | ||
759 | * dv-tx3904tmr.c (deliver_tx3904tmr_tick): Add missing break | |
760 | statement. | |
761 | ||
b3a3ffef HPN |
762 | 2006-03-29 Hans-Peter Nilsson <hp@axis.com> |
763 | ||
764 | * configure: Regenerate. | |
765 | ||
40a5538e CF |
766 | 2005-12-14 Chao-ying Fu <fu@mips.com> |
767 | ||
768 | * Makefile.in (SIM_OBJS): Add dsp.o. | |
769 | (dsp.o): New dependency. | |
770 | (IGEN_INCLUDE): Add dsp.igen. | |
771 | * configure.ac (mipsisa32r2*-*-*, mipsisa32*-*-*, mipsisa64r2*-*-*, | |
772 | mipsisa64*-*-*): Add dsp to sim_igen_machine. | |
773 | * configure: Regenerate. | |
774 | * mips.igen: Add dsp model and include dsp.igen. | |
775 | (MFHI, MFLO, MTHI, MTLO): Remove mips32, mips32r2, mips64, mips64r2, | |
776 | because these instructions are extended in DSP ASE. | |
777 | * sim-main.h (LAST_EMBED_REGNUM): Change from 89 to 96 because of | |
778 | adding 6 DSP accumulator registers and 1 DSP control register. | |
779 | (AC0LOIDX, AC0HIIDX, AC1LOIDX, AC1HIIDX, AC2LOIDX, AC2HIIDX, AC3LOIDX, | |
780 | AC3HIIDX, DSPLO, DSPHI, DSPCRIDX, DSPCR, DSPCR_POS_SHIFT, | |
781 | DSPCR_POS_MASK, DSPCR_POS_SMASK, DSPCR_SCOUNT_SHIFT, DSPCR_SCOUNT_MASK, | |
782 | DSPCR_SCOUNT_SMASK, DSPCR_CARRY_SHIFT, DSPCR_CARRY_MASK, | |
783 | DSPCR_CARRY_SMASK, DSPCR_CARRY, DSPCR_EFI_SHIFT, DSPCR_EFI_MASK, | |
784 | DSPCR_EFI_SMASK, DSPCR_EFI, DSPCR_OUFLAG_SHIFT, DSPCR_OUFLAG_MASK, | |
785 | DSPCR_OUFLAG_SMASK, DSPCR_OUFLAG4, DSPCR_OUFLAG5, DSPCR_OUFLAG6, | |
786 | DSPCR_OUFLAG7, DSPCR_CCOND_SHIFT, DSPCR_CCOND_MASK, | |
787 | DSPCR_CCOND_SMASK): New define. | |
788 | (DSPLO_REGNUM, DSPHI_REGNUM): New array for DSP accumulators. | |
789 | * dsp.c, dsp.igen: New files for MIPS DSP ASE. | |
790 | ||
21d14896 ILT |
791 | 2005-07-08 Ian Lance Taylor <ian@airs.com> |
792 | ||
793 | * tconfig.in (SIM_QUIET_NAN_NEGATED): Define. | |
794 | ||
b16d63da | 795 | 2005-06-16 David Ung <davidu@mips.com> |
72f4393d L |
796 | Nigel Stephens <nigel@mips.com> |
797 | ||
798 | * mips.igen: New mips16e model and include m16e.igen. | |
799 | (check_u64): Add mips16e tag. | |
800 | * m16e.igen: New file for MIPS16e instructions. | |
801 | * configure.ac (mipsisa32*-*-*, mipsisa32r2*-*-*, mipsisa64*-*-*, | |
802 | mipsisa64r2*-*-*): Change sim_gen to M16, add mips16 and mips16e | |
803 | models. | |
804 | * configure: Regenerate. | |
b16d63da | 805 | |
e70cb6cd | 806 | 2005-05-26 David Ung <davidu@mips.com> |
72f4393d | 807 | |
e70cb6cd CD |
808 | * mips.igen (mips32r2, mips64r2): New ISA models. Add new model |
809 | tags to all instructions which are applicable to the new ISAs. | |
810 | (do_ror, do_dror, ROR, RORV, DROR, DROR32, DRORV): Add, moved from | |
811 | vr.igen. | |
812 | * mips3264r2.igen: New file for MIPS 32/64 revision 2 specific | |
72f4393d | 813 | instructions. |
e70cb6cd CD |
814 | * vr.igen (do_ror, do_dror, ROR, RORV, DROR, DROR32, DRORV): Move |
815 | to mips.igen. | |
816 | * configure.ac (mipsisa32r2*-*-*, mipsisa64r2*-*-*): Add new targets. | |
817 | * configure: Regenerate. | |
72f4393d | 818 | |
2b193c4a MK |
819 | 2005-03-23 Mark Kettenis <kettenis@gnu.org> |
820 | ||
821 | * configure: Regenerate. | |
822 | ||
35695fd6 AC |
823 | 2005-01-14 Andrew Cagney <cagney@gnu.org> |
824 | ||
825 | * configure.ac: Sinclude aclocal.m4 before common.m4. Add | |
826 | explicit call to AC_CONFIG_HEADER. | |
827 | * configure: Regenerate. | |
828 | ||
f0569246 AC |
829 | 2005-01-12 Andrew Cagney <cagney@gnu.org> |
830 | ||
831 | * configure.ac: Update to use ../common/common.m4. | |
832 | * configure: Re-generate. | |
833 | ||
38f48d72 AC |
834 | 2005-01-11 Andrew Cagney <cagney@localhost.localdomain> |
835 | ||
836 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
837 | ||
b7026657 AC |
838 | 2005-01-07 Andrew Cagney <cagney@gnu.org> |
839 | ||
840 | * configure.ac: Rename configure.in, require autoconf 2.59. | |
841 | * configure: Re-generate. | |
842 | ||
379832de HPN |
843 | 2004-12-08 Hans-Peter Nilsson <hp@axis.com> |
844 | ||
845 | * configure: Regenerate for ../common/aclocal.m4 update. | |
846 | ||
cd62154c | 847 | 2004-09-24 Monika Chaddha <monika@acmet.com> |
72f4393d | 848 | |
cd62154c AC |
849 | Committed by Andrew Cagney. |
850 | * m16.igen (CMP, CMPI): Fix assembler. | |
851 | ||
e5da76ec CD |
852 | 2004-08-18 Chris Demetriou <cgd@broadcom.com> |
853 | ||
854 | * configure.in (mipsisa64sb1*-*-*): Add mips3d to sim_igen_machine. | |
855 | * configure: Regenerate. | |
856 | ||
139181c8 CD |
857 | 2004-06-25 Chris Demetriou <cgd@broadcom.com> |
858 | ||
859 | * configure.in (sim_m16_machine): Include mipsIII. | |
860 | * configure: Regenerate. | |
861 | ||
1a27f959 CD |
862 | 2004-05-11 Maciej W. Rozycki <macro@ds2.pg.gda.pl> |
863 | ||
72f4393d | 864 | * mips/interp.c (decode_coproc): Sign-extend the address retrieved |
1a27f959 CD |
865 | from COP0_BADVADDR. |
866 | * mips/sim-main.h (COP0_BADVADDR): Remove a cast. | |
867 | ||
5dbb7b5a CD |
868 | 2004-04-10 Chris Demetriou <cgd@broadcom.com> |
869 | ||
870 | * sb1.igen (DIV.PS, RECIP.PS, RSQRT.PS, SQRT.PS): New. | |
871 | ||
14234056 CD |
872 | 2004-04-09 Chris Demetriou <cgd@broadcom.com> |
873 | ||
874 | * mips.igen (check_fmt): Remove. | |
875 | (ABS.fmt, ADD.fmt, C.cond.fmta, C.cond.fmtb, CEIL.L.fmt, CEIL.W) | |
876 | (CVT.D.fmt, CVT.L.fmt, CVT.S.fmt, CVT.W.fmt, DIV.fmt, FLOOR.L.fmt) | |
877 | (FLOOR.W.fmt, MADD.fmt, MOV.fmt, MOVtf.fmt, MOVN.fmt, MOVZ.fmt) | |
878 | (MSUB.fmt, MUL.fmt, NEG.fmt, NMADD.fmt, NMSUB.fmt, RECIP.fmt) | |
879 | (ROUND.L.fmt, ROUND.W.fmt, RSQRT.fmt, SQRT.fmt, SUB.fmt) | |
880 | (TRUNC.L.fmt, TRUNC.W): Explicitly specify allowed FPU formats. | |
881 | (check_fmt_p, CEIL.L.fmt, CEIL.W, DIV.fmt, FLOOR.L.fmt) | |
882 | (FLOOR.W.fmt, RECIP.fmt, ROUND.L.fmt, ROUND.W.fmt, RSQRT.fmt) | |
883 | (SQRT.fmt, TRUNC.L.fmt, TRUNC.W): Remove all uses of check_fmt. | |
884 | (C.cnd.fmta): Remove incorrect call to check_fmt_p. | |
885 | ||
c6f9085c CD |
886 | 2004-04-09 Chris Demetriou <cgd@broadcom.com> |
887 | ||
888 | * sb1.igen (check_sbx): New function. | |
889 | (PABSDIFF.fmt, PABSDIFC.fmt, PAVG.fmt): Use check_sbx. | |
890 | ||
11d66e66 | 891 | 2004-03-29 Chris Demetriou <cgd@broadcom.com> |
0e1b7197 RS |
892 | Richard Sandiford <rsandifo@redhat.com> |
893 | ||
894 | * sim-main.h (MIPS_MACH_HAS_MT_HILO_HAZARD) | |
895 | (MIPS_MACH_HAS_MULT_HILO_HAZARD, MIPS_MACH_HAS_DIV_HILO_HAZARD): New. | |
896 | * mips.igen (check_mt_hilo, check_mult_hilo, check_div_hilo): Provide | |
897 | separate implementations for mipsIV and mipsV. Use new macros to | |
898 | determine whether the restrictions apply. | |
899 | ||
b3208fb8 CD |
900 | 2004-01-19 Chris Demetriou <cgd@broadcom.com> |
901 | ||
902 | * mips.igen (check_mf_cycles, check_mt_hilo, check_mf_hilo) | |
903 | (check_mult_hilo): Improve comments. | |
904 | (check_div_hilo): Likewise. Also, fork off a new version | |
905 | to handle mips32/mips64 (since there are no hazards to check | |
906 | in MIPS32/MIPS64). | |
907 | ||
9a1d84fb CD |
908 | 2003-06-17 Richard Sandiford <rsandifo@redhat.com> |
909 | ||
910 | * mips.igen (do_dmultx): Fix check for negative operands. | |
911 | ||
ae451ac6 ILT |
912 | 2003-05-16 Ian Lance Taylor <ian@airs.com> |
913 | ||
914 | * Makefile.in (SHELL): Make sure this is defined. | |
915 | (various): Use $(SHELL) whenever we invoke move-if-change. | |
916 | ||
dd69d292 CD |
917 | 2003-05-03 Chris Demetriou <cgd@broadcom.com> |
918 | ||
919 | * cp1.c: Tweak attribution slightly. | |
920 | * cp1.h: Likewise. | |
921 | * mdmx.c: Likewise. | |
922 | * mdmx.igen: Likewise. | |
923 | * mips3d.igen: Likewise. | |
924 | * sb1.igen: Likewise. | |
925 | ||
bcd0068e CD |
926 | 2003-04-15 Richard Sandiford <rsandifo@redhat.com> |
927 | ||
928 | * vr.igen (do_vr_mul_op): Zero-extend the low 32 bits of | |
929 | unsigned operands. | |
930 | ||
6b4a8935 AC |
931 | 2003-02-27 Andrew Cagney <cagney@redhat.com> |
932 | ||
601da316 AC |
933 | * interp.c (sim_open): Rename _bfd to bfd. |
934 | (sim_create_inferior): Ditto. | |
6b4a8935 | 935 | |
d29e330f CD |
936 | 2003-01-14 Chris Demetriou <cgd@broadcom.com> |
937 | ||
938 | * mips.igen (LUXC1, SUXC1): New, for mipsV and mips64. | |
939 | ||
a2353a08 CD |
940 | 2003-01-14 Chris Demetriou <cgd@broadcom.com> |
941 | ||
942 | * mips.igen (EI, DI): Remove. | |
943 | ||
80551777 CD |
944 | 2003-01-05 Richard Sandiford <rsandifo@redhat.com> |
945 | ||
946 | * Makefile.in (tmp-run-multi): Fix mips16 filter. | |
947 | ||
4c54fc26 CD |
948 | 2003-01-04 Richard Sandiford <rsandifo@redhat.com> |
949 | Andrew Cagney <ac131313@redhat.com> | |
950 | Gavin Romig-Koch <gavin@redhat.com> | |
951 | Graydon Hoare <graydon@redhat.com> | |
952 | Aldy Hernandez <aldyh@redhat.com> | |
953 | Dave Brolley <brolley@redhat.com> | |
954 | Chris Demetriou <cgd@broadcom.com> | |
955 | ||
956 | * configure.in (mips64vr*): Define TARGET_ENABLE_FR to 1. | |
957 | (sim_mach_default): New variable. | |
958 | (mips64vr-*-*, mips64vrel-*-*): New configurations. | |
959 | Add a new simulator generator, MULTI. | |
960 | * configure: Regenerate. | |
961 | * Makefile.in (SIM_MULTI_OBJ, SIM_EXTRA_DISTCLEAN): New variables. | |
962 | (multi-run.o): New dependency. | |
963 | (SIM_MULTI_ALL, SIM_MULTI_IGEN_CONFIGS): New variables. | |
964 | (tmp-mach-multi, tmp-itable-multi, tmp-run-multi): New rules. | |
965 | (tmp-multi): Combine them. | |
966 | (BUILT_SRC_FROM_MULTI): New variable. Depend on tmp-multi. | |
967 | (clean-extra): Remove sources in BUILT_SRC_FROM_MULTI. | |
968 | (distclean-extra): New rule. | |
969 | * sim-main.h: Include bfd.h. | |
970 | (MIPS_MACH): New macro. | |
971 | * mips.igen (vr4120, vr5400, vr5500): New models. | |
972 | (clo, clz, dclo, dclz, madd, maddu, msub, msub, mul): Add *vr5500. | |
973 | * vr.igen: Replace with new version. | |
974 | ||
e6c674b8 CD |
975 | 2003-01-04 Chris Demetriou <cgd@broadcom.com> |
976 | ||
977 | * configure.in: Use SIM_AC_OPTION_RESERVED_BITS(1). | |
978 | * configure: Regenerate. | |
979 | ||
28f50ac8 CD |
980 | 2002-12-31 Chris Demetriou <cgd@broadcom.com> |
981 | ||
982 | * sim-main.h (check_branch_bug, mark_branch_bug): Remove. | |
983 | * mips.igen: Remove all invocations of check_branch_bug and | |
984 | mark_branch_bug. | |
985 | ||
5071ffe6 CD |
986 | 2002-12-16 Chris Demetriou <cgd@broadcom.com> |
987 | ||
72f4393d | 988 | * tconfig.in: Include "gdb/callback.h" and "gdb/remote-sim.h". |
5071ffe6 | 989 | |
06e7837e CD |
990 | 2002-07-30 Chris Demetriou <cgd@broadcom.com> |
991 | ||
992 | * mips.igen (do_load_double, do_store_double): New functions. | |
993 | (LDC1, SDC1): Rename to... | |
994 | (LDC1b, SDC1b): respectively. | |
995 | (LDC1a, SDC1a): New instructions for MIPS II and MIPS32 support. | |
996 | ||
2265c243 MS |
997 | 2002-07-29 Michael Snyder <msnyder@redhat.com> |
998 | ||
999 | * cp1.c (fp_recip2): Modify initialization expression so that | |
1000 | GCC will recognize it as constant. | |
1001 | ||
a2f8b4f3 CD |
1002 | 2002-06-18 Chris Demetriou <cgd@broadcom.com> |
1003 | ||
1004 | * mdmx.c (SD_): Delete. | |
1005 | (Unpredictable): Re-define, for now, to directly invoke | |
1006 | unpredictable_action(). | |
1007 | (mdmx_acc_op): Fix error in .ob immediate handling. | |
1008 | ||
b4b6c939 AC |
1009 | 2002-06-18 Andrew Cagney <cagney@redhat.com> |
1010 | ||
1011 | * interp.c (sim_firmware_command): Initialize `address'. | |
1012 | ||
c8cca39f AC |
1013 | 2002-06-16 Andrew Cagney <ac131313@redhat.com> |
1014 | ||
1015 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
1016 | ||
e7e81181 | 1017 | 2002-06-14 Chris Demetriou <cgd@broadcom.com> |
72f4393d | 1018 | Ed Satterthwaite <ehs@broadcom.com> |
e7e81181 CD |
1019 | |
1020 | * mips3d.igen: New file which contains MIPS-3D ASE instructions. | |
1021 | * Makefile.in (IGEN_INCLUDE): Add mips3d.igen. | |
1022 | * mips.igen: Include mips3d.igen. | |
1023 | (mips3d): New model name for MIPS-3D ASE instructions. | |
1024 | (CVT.W.fmt): Don't use this instruction for word (source) format | |
72f4393d | 1025 | instructions. |
e7e81181 CD |
1026 | * cp1.c (fp_binary_r, fp_add_r, fp_mul_r, fpu_inv1, fpu_inv1_32) |
1027 | (fpu_inv1_64, fp_recip1, fp_recip2, fpu_inv_sqrt1, fpu_inv_sqrt1_32) | |
1028 | (fpu_inv_sqrt1_64, fp_rsqrt1, fp_rsqrt2): New functions. | |
1029 | (NR_FRAC_GUARD, IMPLICIT_1): New macros. | |
1030 | * sim-main.h (fmt_pw, CompareAbs, AddR, MultiplyR, Recip1, Recip2) | |
1031 | (RSquareRoot1, RSquareRoot2): New macros. | |
1032 | (fp_add_r, fp_mul_r, fp_recip1, fp_recip2, fp_rsqrt1) | |
1033 | (fp_rsqrt2): New functions. | |
1034 | * configure.in: Add MIPS-3D support to mipsisa64 simulator. | |
1035 | * configure: Regenerate. | |
1036 | ||
3a2b820e | 1037 | 2002-06-13 Chris Demetriou <cgd@broadcom.com> |
72f4393d | 1038 | Ed Satterthwaite <ehs@broadcom.com> |
3a2b820e CD |
1039 | |
1040 | * cp1.c (FP_PS_upper, FP_PS_lower, FP_PS_cat, FPQNaN_PS): New macros. | |
1041 | (value_fpr, store_fpr, fp_cmp, fp_unary, fp_binary, fp_mac) | |
1042 | (fp_inv_sqrt, fpu_format_name): Add paired-single support. | |
1043 | (convert): Note that this function is not used for paired-single | |
1044 | format conversions. | |
1045 | (ps_lower, ps_upper, pack_ps, convert_ps): New functions. | |
1046 | * mips.igen (FMT, MOVtf.fmt): Add paired-single support. | |
1047 | (check_fmt_p): Enable paired-single support. | |
1048 | (ALNV.PS, CVT.PS.S, CVT.S.PL, CVT.S.PU, PLL.PS, PLU.PS, PUL.PS) | |
1049 | (PUU.PS): New instructions. | |
1050 | (CVT.S.fmt): Don't use this instruction for paired-single format | |
1051 | destinations. | |
1052 | * sim-main.h (FP_formats): New value 'fmt_ps.' | |
1053 | (ps_lower, ps_upper, pack_ps, convert_ps): New prototypes. | |
1054 | (PSLower, PSUpper, PackPS, ConvertPS): New macros. | |
1055 | ||
d18ea9c2 CD |
1056 | 2002-06-12 Chris Demetriou <cgd@broadcom.com> |
1057 | ||
1058 | * mips.igen: Fix formatting of function calls in | |
1059 | many FP operations. | |
1060 | ||
95fd5cee CD |
1061 | 2002-06-12 Chris Demetriou <cgd@broadcom.com> |
1062 | ||
1063 | * mips.igen (MOVN, MOVZ): Trace result. | |
1064 | (TNEI): Print "tnei" as the opcode name in traces. | |
1065 | (CEIL.W): Add disassembly string for traces. | |
1066 | (RSQRT.fmt): Make location of disassembly string consistent | |
1067 | with other instructions. | |
1068 | ||
4f0d55ae CD |
1069 | 2002-06-12 Chris Demetriou <cgd@broadcom.com> |
1070 | ||
1071 | * mips.igen (X): Delete unused function. | |
1072 | ||
3c25f8c7 AC |
1073 | 2002-06-08 Andrew Cagney <cagney@redhat.com> |
1074 | ||
1075 | * interp.c: Include "gdb/callback.h" and "gdb/remote-sim.h". | |
1076 | ||
f3c08b7e | 1077 | 2002-06-07 Chris Demetriou <cgd@broadcom.com> |
72f4393d | 1078 | Ed Satterthwaite <ehs@broadcom.com> |
f3c08b7e CD |
1079 | |
1080 | * cp1.c (inner_mac, fp_mac, inner_rsqrt, fp_inv_sqrt) | |
1081 | (fp_rsqrt, fp_madd, fp_msub, fp_nmadd, fp_nmsub): New functions. | |
1082 | * sim-main.h (fp_rsqrt, fp_madd, fp_msub, fp_nmadd) | |
1083 | (fp_nmsub): New prototypes. | |
1084 | (RSquareRoot, MultiplyAdd, MultiplySub, NegMultiplyAdd) | |
1085 | (NegMultiplySub): New defines. | |
1086 | * mips.igen (RSQRT.fmt): Use RSquareRoot(). | |
1087 | (MADD.D, MADD.S): Replace with... | |
1088 | (MADD.fmt): New instruction. | |
1089 | (MSUB.D, MSUB.S): Replace with... | |
1090 | (MSUB.fmt): New instruction. | |
1091 | (NMADD.D, NMADD.S): Replace with... | |
1092 | (NMADD.fmt): New instruction. | |
1093 | (NMSUB.D, MSUB.S): Replace with... | |
1094 | (NMSUB.fmt): New instruction. | |
1095 | ||
52714ff9 | 1096 | 2002-06-07 Chris Demetriou <cgd@broadcom.com> |
72f4393d | 1097 | Ed Satterthwaite <ehs@broadcom.com> |
52714ff9 CD |
1098 | |
1099 | * cp1.c: Fix more comment spelling and formatting. | |
1100 | (value_fcr, store_fcr): Use fenr_FS rather than hard-coding value. | |
1101 | (denorm_mode): New function. | |
1102 | (fpu_unary, fpu_binary): Round results after operation, collect | |
1103 | status from rounding operations, and update the FCSR. | |
1104 | (convert): Collect status from integer conversions and rounding | |
1105 | operations, and update the FCSR. Adjust NaN values that result | |
1106 | from conversions. Convert to use sim_io_eprintf rather than | |
1107 | fprintf, and remove some debugging code. | |
1108 | * cp1.h (fenr_FS): New define. | |
1109 | ||
577d8c4b CD |
1110 | 2002-06-07 Chris Demetriou <cgd@broadcom.com> |
1111 | ||
1112 | * cp1.c (convert): Remove unusable debugging code, and move MIPS | |
1113 | rounding mode to sim FP rounding mode flag conversion code into... | |
1114 | (rounding_mode): New function. | |
1115 | ||
196496ed CD |
1116 | 2002-06-07 Chris Demetriou <cgd@broadcom.com> |
1117 | ||
1118 | * cp1.c: Clean up formatting of a few comments. | |
1119 | (value_fpr): Reformat switch statement. | |
1120 | ||
cfe9ea23 | 1121 | 2002-06-06 Chris Demetriou <cgd@broadcom.com> |
72f4393d | 1122 | Ed Satterthwaite <ehs@broadcom.com> |
cfe9ea23 CD |
1123 | |
1124 | * cp1.h: New file. | |
1125 | * sim-main.h: Include cp1.h. | |
1126 | (SETFCC, GETFCC, IR, UF, OF, DX, IO, UO, FP_FLAGS, FP_ENABLE) | |
1127 | (FP_CAUSE, GETFS, FP_RM_NEAREST, FP_RM_TOZERO, FP_RM_TOPINF) | |
1128 | (FP_RM_TOMINF, GETRM): Remove. Moved to cp1.h. | |
1129 | (FP_FS, FP_MASK_RM, FP_SH_RM, Nan, Less, Equal): Remove. | |
1130 | (value_fcr, store_fcr, test_fcsr, fp_cmp): New prototypes. | |
1131 | (ValueFCR, StoreFCR, TestFCSR, Compare): New macros. | |
1132 | * cp1.c: Don't include sim-fpu.h; already included by | |
1133 | sim-main.h. Clean up formatting of some comments. | |
1134 | (NaN, Equal, Less): Remove. | |
1135 | (test_fcsr, value_fcr, store_fcr, update_fcsr, fp_test) | |
1136 | (fp_cmp): New functions. | |
1137 | * mips.igen (do_c_cond_fmt): Remove. | |
1138 | (C.cond.fmta, C.cond.fmtb): Replace uses of do_c_cond_fmt_a with | |
1139 | Compare. Add result tracing. | |
1140 | (CxC1): Remove, replace with... | |
1141 | (CFC1a, CFC1b, CFC1c, CTC1a, CTC1b, CTC1c): New instructions. | |
1142 | (DMxC1): Remove, replace with... | |
1143 | (DMFC1a, DMFC1b, DMTC1a, DMTC1b): New instructions. | |
72f4393d L |
1144 | (MxC1): Remove, replace with... |
1145 | (MFC1a, MFC1b, MTC1a, MTC1b): New instructions. | |
cfe9ea23 | 1146 | |
ee7254b0 CD |
1147 | 2002-06-04 Chris Demetriou <cgd@broadcom.com> |
1148 | ||
1149 | * sim-main.h (FGRIDX): Remove, replace all uses with... | |
1150 | (FGR_BASE): New macro. | |
1151 | (FP0_REGNUM, FCRCS_REGNUM, FCRIR_REGNUM): New macros. | |
1152 | (_sim_cpu): Move 'fgr' member to be right before 'fpr_state' member. | |
1153 | (NR_FGR, FGR): Likewise. | |
1154 | * interp.c: Replace all uses of FGRIDX with FGR_BASE. | |
1155 | * mips.igen: Likewise. | |
1156 | ||
d3eb724f CD |
1157 | 2002-06-04 Chris Demetriou <cgd@broadcom.com> |
1158 | ||
1159 | * cp1.c: Add an FSF Copyright notice to this file. | |
1160 | ||
ba46ddd0 | 1161 | 2002-06-04 Chris Demetriou <cgd@broadcom.com> |
72f4393d | 1162 | Ed Satterthwaite <ehs@broadcom.com> |
ba46ddd0 CD |
1163 | |
1164 | * cp1.c (Infinity): Remove. | |
1165 | * sim-main.h (Infinity): Likewise. | |
1166 | ||
1167 | * cp1.c (fp_unary, fp_binary): New functions. | |
1168 | (fp_abs, fp_neg, fp_add, fp_sub, fp_mul, fp_div, fp_recip) | |
1169 | (fp_sqrt): New functions, implemented in terms of the above. | |
1170 | (AbsoluteValue, Negate, Add, Sub, Multiply, Divide) | |
1171 | (Recip, SquareRoot): Remove (replaced by functions above). | |
1172 | * sim-main.h (fp_abs, fp_neg, fp_add, fp_sub, fp_mul, fp_div) | |
1173 | (fp_recip, fp_sqrt): New prototypes. | |
1174 | (AbsoluteValue, Negate, Add, Sub, Multiply, Divide) | |
1175 | (Recip, SquareRoot): Replace prototypes with #defines which | |
1176 | invoke the functions above. | |
72f4393d | 1177 | |
18d8a52d CD |
1178 | 2002-06-03 Chris Demetriou <cgd@broadcom.com> |
1179 | ||
1180 | * sim-main.h (Nan, Infinity, Less, Equal, AbsoluteValue, Negate) | |
1181 | (Add, Sub, Multiply, Divide, Recip, SquareRoot): Move lower in | |
1182 | file, remove PARAMS from prototypes. | |
1183 | (value_fpr, store_fpr, convert): Likewise. Use SIM_STATE to provide | |
1184 | simulator state arguments. | |
1185 | (ValueFPR, StoreFPR, Convert): Move lower in file. Use SIM_ARGS to | |
1186 | pass simulator state arguments. | |
1187 | * cp1.c (SD): Redefine as CPU_STATE(cpu). | |
1188 | (store_fpr, convert): Remove 'sd' argument. | |
1189 | (value_fpr): Likewise. Convert to use 'SD' instead. | |
1190 | ||
0f154cbd CD |
1191 | 2002-06-03 Chris Demetriou <cgd@broadcom.com> |
1192 | ||
1193 | * cp1.c (Min, Max): Remove #if 0'd functions. | |
1194 | * sim-main.h (Min, Max): Remove. | |
1195 | ||
e80fc152 CD |
1196 | 2002-06-03 Chris Demetriou <cgd@broadcom.com> |
1197 | ||
1198 | * cp1.c: fix formatting of switch case and default labels. | |
1199 | * interp.c: Likewise. | |
1200 | * sim-main.c: Likewise. | |
1201 | ||
bad673a9 CD |
1202 | 2002-06-03 Chris Demetriou <cgd@broadcom.com> |
1203 | ||
1204 | * cp1.c: Clean up comments which describe FP formats. | |
1205 | (FPQNaN_DOUBLE, FPQNaN_LONG): Generate using UNSIGNED64. | |
1206 | ||
7cbea089 | 1207 | 2002-06-03 Chris Demetriou <cgd@broadcom.com> |
72f4393d | 1208 | Ed Satterthwaite <ehs@broadcom.com> |
7cbea089 CD |
1209 | |
1210 | * configure.in (mipsisa64sb1*-*-*): New target for supporting | |
1211 | Broadcom SiByte SB-1 processor configurations. | |
1212 | * configure: Regenerate. | |
1213 | * sb1.igen: New file. | |
1214 | * mips.igen: Include sb1.igen. | |
1215 | (sb1): New model. | |
1216 | * Makefile.in (IGEN_INCLUDE): Add sb1.igen. | |
1217 | * mdmx.igen: Add "sb1" model to all appropriate functions and | |
1218 | instructions. | |
1219 | * mdmx.c (AbsDiffOB, AvgOB, AccAbsDiffOB): New functions. | |
1220 | (ob_func, ob_acc): Reference the above. | |
1221 | (qh_acc): Adjust to keep the same size as ob_acc. | |
1222 | * sim-main.h (status_SBX, MX_VECT_ABSD, MX_VECT_AVG, MX_AbsDiff) | |
1223 | (MX_Avg, MX_VECT_ABSDA, MX_AbsDiffC): New macros. | |
1224 | ||
909daa82 CD |
1225 | 2002-06-03 Chris Demetriou <cgd@broadcom.com> |
1226 | ||
1227 | * Makefile.in (IGEN_INCLUDE): Add mdmx.igen. | |
1228 | ||
f4f1b9f1 | 1229 | 2002-06-02 Chris Demetriou <cgd@broadcom.com> |
72f4393d | 1230 | Ed Satterthwaite <ehs@broadcom.com> |
f4f1b9f1 CD |
1231 | |
1232 | * mips.igen (mdmx): New (pseudo-)model. | |
1233 | * mdmx.c, mdmx.igen: New files. | |
1234 | * Makefile.in (SIM_OBJS): Add mdmx.o. | |
1235 | * sim-main.h (MDMX_accumulator, MX_fmtsel, signed24, signed48): | |
1236 | New typedefs. | |
1237 | (ACC, MX_Add, MX_AddA, MX_AddL, MX_And, MX_C_EQ, MX_C_LT, MX_Comp) | |
1238 | (MX_FMT_OB, MX_FMT_QH, MX_Max, MX_Min, MX_Msgn, MX_Mul, MX_MulA) | |
1239 | (MX_MulL, MX_MulS, MX_MulSL, MX_Nor, MX_Or, MX_Pick, MX_RAC) | |
1240 | (MX_RAC_H, MX_RAC_L, MX_RAC_M, MX_RNAS, MX_RNAU, MX_RND_AS) | |
1241 | (MX_RND_AU, MX_RND_ES, MX_RND_EU, MX_RND_ZS, MX_RND_ZU, MX_RNES) | |
1242 | (MX_RNEU, MX_RZS, MX_RZU, MX_SHFL, MX_ShiftLeftLogical) | |
1243 | (MX_ShiftRightArith, MX_ShiftRightLogical, MX_Sub, MX_SubA, MX_SubL) | |
1244 | (MX_VECT_ADD, MX_VECT_ADDA, MX_VECT_ADDL, MX_VECT_AND) | |
1245 | (MX_VECT_MAX, MX_VECT_MIN, MX_VECT_MSGN, MX_VECT_MUL, MX_VECT_MULA) | |
1246 | (MX_VECT_MULL, MX_VECT_MULS, MX_VECT_MULSL, MX_VECT_NOR) | |
1247 | (MX_VECT_OR, MX_VECT_SLL, MX_VECT_SRA, MX_VECT_SRL, MX_VECT_SUB) | |
1248 | (MX_VECT_SUBA, MX_VECT_SUBL, MX_VECT_XOR, MX_WACH, MX_WACL, MX_Xor) | |
1249 | (SIM_ARGS, SIM_STATE, UnpredictableResult, fmt_mdmx, ob_fmtsel) | |
1250 | (qh_fmtsel): New macros. | |
1251 | (_sim_cpu): New member "acc". | |
1252 | (mdmx_acc_op, mdmx_cc_op, mdmx_cpr_op, mdmx_pick_op, mdmx_rac_op) | |
1253 | (mdmx_round_op, mdmx_shuffle, mdmx_wach, mdmx_wacl): New functions. | |
1254 | ||
5accf1ff CD |
1255 | 2002-05-01 Chris Demetriou <cgd@broadcom.com> |
1256 | ||
1257 | * interp.c: Use 'deprecated' rather than 'depreciated.' | |
1258 | * sim-main.h: Likewise. | |
1259 | ||
402586aa CD |
1260 | 2002-05-01 Chris Demetriou <cgd@broadcom.com> |
1261 | ||
1262 | * cp1.c (store_fpr): Remove #ifdef'd out call to UndefinedResult | |
1263 | which wouldn't compile anyway. | |
1264 | * sim-main.h (unpredictable_action): New function prototype. | |
1265 | (Unpredictable): Define to call igen function unpredictable(). | |
1266 | (NotWordValue): New macro to call igen function not_word_value(). | |
1267 | (UndefinedResult): Remove. | |
1268 | * interp.c (undefined_result): Remove. | |
1269 | (unpredictable_action): New function. | |
1270 | * mips.igen (not_word_value, unpredictable): New functions. | |
1271 | (ADD, ADDI, do_addiu, do_addu, BGEZAL, BGEZALL, BLTZAL, BLTZALL) | |
1272 | (CLO, CLZ, MADD, MADDU, MSUB, MSUBU, MUL, do_mult, do_multu) | |
1273 | (do_sra, do_srav, do_srl, do_srlv, SUB, do_subu): Invoke | |
1274 | NotWordValue() to check for unpredictable inputs, then | |
1275 | Unpredictable() to handle them. | |
1276 | ||
c9b9995a CD |
1277 | 2002-02-24 Chris Demetriou <cgd@broadcom.com> |
1278 | ||
1279 | * mips.igen: Fix formatting of calls to Unpredictable(). | |
1280 | ||
e1015982 AC |
1281 | 2002-04-20 Andrew Cagney <ac131313@redhat.com> |
1282 | ||
1283 | * interp.c (sim_open): Revert previous change. | |
1284 | ||
b882a66b AO |
1285 | 2002-04-18 Alexandre Oliva <aoliva@redhat.com> |
1286 | ||
1287 | * interp.c (sim_open): Disable chunk of code that wrote code in | |
1288 | vector table entries. | |
1289 | ||
c429b7dd CD |
1290 | 2002-03-19 Chris Demetriou <cgd@broadcom.com> |
1291 | ||
1292 | * cp1.c (FP_S_s, FP_D_s, FP_S_be, FP_D_be, FP_S_e, FP_D_e, FP_S_f) | |
1293 | (FP_D_f, FP_S_fb, FP_D_fb, FPINF_SINGLE, FPINF_DOUBLE): Remove | |
1294 | unused definitions. | |
1295 | ||
37d146fa CD |
1296 | 2002-03-19 Chris Demetriou <cgd@broadcom.com> |
1297 | ||
1298 | * cp1.c: Fix many formatting issues. | |
1299 | ||
07892c0b CD |
1300 | 2002-03-19 Chris G. Demetriou <cgd@broadcom.com> |
1301 | ||
1302 | * cp1.c (fpu_format_name): New function to replace... | |
1303 | (DOFMT): This. Delete, and update all callers. | |
1304 | (fpu_rounding_mode_name): New function to replace... | |
1305 | (RMMODE): This. Delete, and update all callers. | |
1306 | ||
487f79b7 CD |
1307 | 2002-03-19 Chris G. Demetriou <cgd@broadcom.com> |
1308 | ||
1309 | * interp.c: Move FPU support routines from here to... | |
1310 | * cp1.c: Here. New file. | |
1311 | * Makefile.in (SIM_OBJS): Add cp1.o to object list. | |
1312 | (cp1.o): New target. | |
1313 | ||
1e799e28 CD |
1314 | 2002-03-12 Chris Demetriou <cgd@broadcom.com> |
1315 | ||
1316 | * configure.in (mipsisa32*-*-*, mipsisa64*-*-*): New targets. | |
1317 | * mips.igen (mips32, mips64): New models, add to all instructions | |
1318 | and functions as appropriate. | |
1319 | (loadstore_ea, check_u64): New variant for model mips64. | |
1320 | (check_fmt_p): New variant for models mipsV and mips64, remove | |
1321 | mipsV model marking fro other variant. | |
1322 | (SLL) Rename to... | |
1323 | (SLLa) this. | |
1324 | (CLO, CLZ, MADD, MADDU, MSUB, MSUBU, MUL, SLLb): New instructions | |
1325 | for mips32 and mips64. | |
1326 | (DCLO, DCLZ): New instructions for mips64. | |
1327 | ||
82f728db CD |
1328 | 2002-03-07 Chris Demetriou <cgd@broadcom.com> |
1329 | ||
1330 | * mips.igen (BREAK, LUI, ORI, SYSCALL, XORI): Print | |
1331 | immediate or code as a hex value with the "%#lx" format. | |
1332 | (ANDI): Likewise, and fix printed instruction name. | |
1333 | ||
b96e7ef1 CD |
1334 | 2002-03-05 Chris Demetriou <cgd@broadcom.com> |
1335 | ||
1336 | * sim-main.h (UndefinedResult, Unpredictable): New macros | |
1337 | which currently do nothing. | |
1338 | ||
d35d4f70 CD |
1339 | 2002-03-05 Chris Demetriou <cgd@broadcom.com> |
1340 | ||
1341 | * sim-main.h (status_UX, status_SX, status_KX, status_TS) | |
1342 | (status_PX, status_MX, status_CU0, status_CU1, status_CU2) | |
1343 | (status_CU3): New definitions. | |
1344 | ||
1345 | * sim-main.h (ExceptionCause): Add new values for MIPS32 | |
1346 | and MIPS64: MDMX, MCheck, CacheErr. Update comments | |
1347 | for DebugBreakPoint and NMIReset to note their status in | |
1348 | MIPS32 and MIPS64. | |
1349 | (SignalExceptionMDMX, SignalExceptionWatch, SignalExceptionMCheck) | |
1350 | (SignalExceptionCacheErr): New exception macros. | |
1351 | ||
3ad6f714 CD |
1352 | 2002-03-05 Chris Demetriou <cgd@broadcom.com> |
1353 | ||
1354 | * mips.igen (check_fpu): Enable check for coprocessor 1 usability. | |
1355 | * sim-main.h (COP_Usable): Define, but for now coprocessor 1 | |
1356 | is always enabled. | |
1357 | (SignalExceptionCoProcessorUnusable): Take as argument the | |
1358 | unusable coprocessor number. | |
1359 | ||
86b77b47 CD |
1360 | 2002-03-05 Chris Demetriou <cgd@broadcom.com> |
1361 | ||
1362 | * mips.igen: Fix formatting of all SignalException calls. | |
1363 | ||
97a88e93 | 1364 | 2002-03-05 Chris Demetriou <cgd@broadcom.com> |
3dea6720 CD |
1365 | |
1366 | * sim-main.h (SIGNEXTEND): Remove. | |
1367 | ||
97a88e93 | 1368 | 2002-03-04 Chris Demetriou <cgd@broadcom.com> |
b5040d49 CD |
1369 | |
1370 | * mips.igen: Remove gencode comment from top of file, fix | |
1371 | spelling in another comment. | |
1372 | ||
97a88e93 | 1373 | 2002-03-04 Chris Demetriou <cgd@broadcom.com> |
8612006b CD |
1374 | |
1375 | * mips.igen (check_fmt, check_fmt_p): New functions to check | |
1376 | whether specific floating point formats are usable. | |
1377 | (ABS.fmt, ADD.fmt, CEIL.L.fmt, CEIL.W, DIV.fmt, FLOOR.L.fmt) | |
1378 | (FLOOR.W.fmt, MOV.fmt, MUL.fmt, NEG.fmt, RECIP.fmt, ROUND.L.fmt) | |
1379 | (ROUND.W.fmt, RSQRT.fmt, SQRT.fmt, SUB.fmt, TRUNC.L.fmt, TRUNC.W): | |
1380 | Use the new functions. | |
1381 | (do_c_cond_fmt): Remove format checks... | |
1382 | (C.cond.fmta, C.cond.fmtb): And move them into all callers. | |
1383 | ||
97a88e93 | 1384 | 2002-03-03 Chris Demetriou <cgd@broadcom.com> |
9b17d183 CD |
1385 | |
1386 | * mips.igen: Fix formatting of check_fpu calls. | |
1387 | ||
41774c9d CD |
1388 | 2002-03-03 Chris Demetriou <cgd@broadcom.com> |
1389 | ||
1390 | * mips.igen (FLOOR.L.fmt): Store correct destination register. | |
1391 | ||
4a0bd876 CD |
1392 | 2002-03-03 Chris Demetriou <cgd@broadcom.com> |
1393 | ||
1394 | * mips.igen: Remove whitespace at end of lines. | |
1395 | ||
09297648 CD |
1396 | 2002-03-02 Chris Demetriou <cgd@broadcom.com> |
1397 | ||
1398 | * mips.igen (loadstore_ea): New function to do effective | |
1399 | address calculations. | |
1400 | (do_load, do_load_left, do_load_right, LL, LDD, PREF, do_store, | |
1401 | do_store_left, do_store_right, SC, SCD, PREFX, SWC1, SWXC1, | |
1402 | CACHE): Use loadstore_ea to do effective address computations. | |
1403 | ||
043b7057 CD |
1404 | 2002-03-02 Chris Demetriou <cgd@broadcom.com> |
1405 | ||
1406 | * interp.c (load_word): Use EXTEND32 rather than SIGNEXTEND. | |
1407 | * mips.igen (LL, CxC1, MxC1): Likewise. | |
1408 | ||
c1e8ada4 CD |
1409 | 2002-03-02 Chris Demetriou <cgd@broadcom.com> |
1410 | ||
1411 | * mips.igen (LL, LLD, PREF, SC, SCD, ABS.fmt, ADD.fmt, CEIL.L.fmt, | |
1412 | CEIL.W, CVT.D.fmt, CVT.L.fmt, CVT.S.fmt, CVT.W.fmt, DIV.fmt, | |
1413 | FLOOR.L.fmt, FLOOR.W.fmt, MADD.D, MADD.S, MOV.fmt, MOVtf.fmt, | |
1414 | MSUB.D, MSUB.S, MUL.fmt, NEG.fmt, NMADD.D, NMADD.S, NMSUB.D, | |
1415 | NMSUB.S, PREFX, RECIP.fmt, ROUND.L.fmt, ROUND.W.fmt, RSQRT.fmt, | |
1416 | SQRT.fmt, SUB.fmt, SWC1, SWXC1, TRUNC.L.fmt, TRUNC.W, CACHE): | |
1417 | Don't split opcode fields by hand, use the opcode field values | |
1418 | provided by igen. | |
1419 | ||
3e1dca16 CD |
1420 | 2002-03-01 Chris Demetriou <cgd@broadcom.com> |
1421 | ||
1422 | * mips.igen (do_divu): Fix spacing. | |
1423 | ||
1424 | * mips.igen (do_dsllv): Move to be right before DSLLV, | |
1425 | to match the rest of the do_<shift> functions. | |
1426 | ||
fff8d27d CD |
1427 | 2002-03-01 Chris Demetriou <cgd@broadcom.com> |
1428 | ||
1429 | * mips.igen (do_dsll, do_dsllv, DSLL32, do_dsra, DSRA32, do_dsrl, | |
1430 | DSRL32, do_dsrlv): Trace inputs and results. | |
1431 | ||
0d3e762b CD |
1432 | 2002-03-01 Chris Demetriou <cgd@broadcom.com> |
1433 | ||
1434 | * mips.igen (CACHE): Provide instruction-printing string. | |
1435 | ||
1436 | * interp.c (signal_exception): Comment tokens after #endif. | |
1437 | ||
eb5fcf93 CD |
1438 | 2002-02-28 Chris Demetriou <cgd@broadcom.com> |
1439 | ||
1440 | * mips.igen (LWXC1): Mark with filter "64,f", rather than just "32". | |
72f4393d L |
1441 | (MOVtf, MxC1, MxC1, DMxC1, DMxC1, CxC1, CxC1, SQRT.fmt, MOV.fmt, |
1442 | NEG.fmt, ROUND.L.fmt, TRUNC.L.fmt, CEIL.L.fmt, FLOOR.L.fmt, | |
1443 | ROUND.W.fmt, TRUNC.W, CEIL.W, FLOOR.W.fmt, RECIP.fmt, RSQRT.fmt, | |
1444 | CVT.S.fmt, CVT.D.fmt, CVT.W.fmt, CVT.L.fmt, MOVtf.fmt, C.cond.fmta, | |
1445 | C.cond.fmtb, SUB.fmt, MUL.fmt, DIV.fmt, MOVZ.fmt, MOVN.fmt, LDXC1, | |
1446 | SWXC1, SDXC1, MSUB.D, MSUB.S, NMADD.S, NMADD.D, NMSUB.S, NMSUB.D, | |
eb5fcf93 CD |
1447 | LWC1, SWC1): Add "f" to filter, since these are FP instructions. |
1448 | ||
bb22bd7d CD |
1449 | 2002-02-28 Chris Demetriou <cgd@broadcom.com> |
1450 | ||
1451 | * mips.igen (DSRA32, DSRAV): Fix order of arguments in | |
1452 | instruction-printing string. | |
1453 | (LWU): Use '64' as the filter flag. | |
1454 | ||
91a177cf CD |
1455 | 2002-02-28 Chris Demetriou <cgd@broadcom.com> |
1456 | ||
1457 | * mips.igen (SDXC1): Fix instruction-printing string. | |
1458 | ||
387f484a CD |
1459 | 2002-02-28 Chris Demetriou <cgd@broadcom.com> |
1460 | ||
1461 | * mips.igen (LDC1, SDC1): Remove mipsI model, and mark with | |
1462 | filter flags "32,f". | |
1463 | ||
3d81f391 CD |
1464 | 2002-02-27 Chris Demetriou <cgd@broadcom.com> |
1465 | ||
1466 | * mips.igen (PREFX): This is a 64-bit instruction, use '64' | |
1467 | as the filter flag. | |
1468 | ||
af5107af CD |
1469 | 2002-02-27 Chris Demetriou <cgd@broadcom.com> |
1470 | ||
1471 | * mips.igen (PREFX): Tweak instruction opcode fields (i.e., | |
1472 | add a comma) so that it more closely match the MIPS ISA | |
1473 | documentation opcode partitioning. | |
1474 | (PREF): Put useful names on opcode fields, and include | |
1475 | instruction-printing string. | |
1476 | ||
ca971540 CD |
1477 | 2002-02-27 Chris Demetriou <cgd@broadcom.com> |
1478 | ||
1479 | * mips.igen (check_u64): New function which in the future will | |
1480 | check whether 64-bit instructions are usable and signal an | |
1481 | exception if not. Currently a no-op. | |
1482 | (DADD, DADDI, DADDIU, DADDU, DDIV, DDIVU, DMULT, DMULTU, DSLL, | |
1483 | DSLL32, DSLLV, DSRA, DSRA32, DSRAV, DSRL, DSRL32, DSRLV, DSUB, | |
1484 | DSUBU, LD, LDL, LDR, LLD, LWU, SCD, SD, SDL, SDR, DMxC1, LDXC1, | |
1485 | LWXC1, SDXC1, SWXC1, DMFC0, DMTC0): Use check_u64. | |
1486 | ||
1487 | * mips.igen (check_fpu): New function which in the future will | |
1488 | check whether FPU instructions are usable and signal an exception | |
1489 | if not. Currently a no-op. | |
1490 | (ABS.fmt, ADD.fmt, BC1a, BC1b, C.cond.fmta, C.cond.fmtb, | |
1491 | CEIL.L.fmt, CEIL.W, CxC1, CVT.D.fmt, CVT.L.fmt, CVT.S.fmt, | |
1492 | CVT.W.fmt, DIV.fmt, DMxC1, DMxC1, FLOOR.L.fmt, FLOOR.W.fmt, LDC1, | |
1493 | LDXC1, LWC1, LWXC1, MADD.D, MADD.S, MxC1, MOV.fmt, MOVtf, | |
1494 | MOVtf.fmt, MOVN.fmt, MOVZ.fmt, MSUB.D, MSUB.S, MUL.fmt, NEG.fmt, | |
1495 | NMADD.D, NMADD.S, NMSUB.D, NMSUB.S, RECIP.fmt, ROUND.L.fmt, | |
1496 | ROUND.W.fmt, RSQRT.fmt, SDC1, SDXC1, SQRT.fmt, SUB.fmt, SWC1, | |
1497 | SWXC1, TRUNC.L.fmt, TRUNC.W): Use check_fpu. | |
1498 | ||
1c47a468 CD |
1499 | 2002-02-27 Chris Demetriou <cgd@broadcom.com> |
1500 | ||
1501 | * mips.igen (do_load_left, do_load_right): Move to be immediately | |
1502 | following do_load. | |
1503 | (do_store_left, do_store_right): Move to be immediately following | |
1504 | do_store. | |
1505 | ||
603a98e7 CD |
1506 | 2002-02-27 Chris Demetriou <cgd@broadcom.com> |
1507 | ||
1508 | * mips.igen (mipsV): New model name. Also, add it to | |
1509 | all instructions and functions where it is appropriate. | |
1510 | ||
c5d00cc7 CD |
1511 | 2002-02-18 Chris Demetriou <cgd@broadcom.com> |
1512 | ||
1513 | * mips.igen: For all functions and instructions, list model | |
1514 | names that support that instruction one per line. | |
1515 | ||
074e9cb8 CD |
1516 | 2002-02-11 Chris Demetriou <cgd@broadcom.com> |
1517 | ||
1518 | * mips.igen: Add some additional comments about supported | |
1519 | models, and about which instructions go where. | |
1520 | (BC1b, MFC0, MTC0, RFE): Sort supported models in the same | |
1521 | order as is used in the rest of the file. | |
1522 | ||
9805e229 CD |
1523 | 2002-02-11 Chris Demetriou <cgd@broadcom.com> |
1524 | ||
1525 | * mips.igen (ADD, ADDI, DADDI, DSUB, SUB): Add comment | |
1526 | indicating that ALU32_END or ALU64_END are there to check | |
1527 | for overflow. | |
1528 | (DADD): Likewise, but also remove previous comment about | |
1529 | overflow checking. | |
1530 | ||
f701dad2 CD |
1531 | 2002-02-10 Chris Demetriou <cgd@broadcom.com> |
1532 | ||
1533 | * mips.igen (DDIV, DIV, DIVU, DMULT, DMULTU, DSLL, DSLL32, | |
1534 | DSLLV, DSRA, DSRA32, DSRAV, DSRL, DSRL32, DSRLV, DSUB, DSUBU, | |
1535 | JALR, JR, MOVN, MOVZ, MTLO, MULT, MULTU, SLL, SLLV, SLT, SLTU, | |
1536 | SRAV, SRLV, SUB, SUBU, SYNC, XOR, MOVtf, DI, DMFC0, DMTC0, EI, | |
1537 | ERET, RFE, TLBP, TLBR, TLBWI, TLBWR): Tweak instruction opcode | |
1538 | fields (i.e., add and move commas) so that they more closely | |
1539 | match the MIPS ISA documentation opcode partitioning. | |
1540 | ||
1541 | 2002-02-10 Chris Demetriou <cgd@broadcom.com> | |
20ae0098 | 1542 | |
72f4393d L |
1543 | * mips.igen (ADDI): Print immediate value. |
1544 | (BREAK): Print code. | |
1545 | (DADDIU, DSRAV, DSRLV): Print correct instruction name. | |
1546 | (SLL): Print "nop" specially, and don't run the code | |
1547 | that does the shift for the "nop" case. | |
20ae0098 | 1548 | |
9e52972e FF |
1549 | 2001-11-17 Fred Fish <fnf@redhat.com> |
1550 | ||
1551 | * sim-main.h (float_operation): Move enum declaration outside | |
1552 | of _sim_cpu struct declaration. | |
1553 | ||
c0efbca4 JB |
1554 | 2001-04-12 Jim Blandy <jimb@redhat.com> |
1555 | ||
1556 | * mips.igen (CFC1, CTC1): Pass the correct register numbers to | |
1557 | PENDING_FILL. Use PENDING_SCHED directly to handle the pending | |
1558 | set of the FCSR. | |
1559 | * sim-main.h (COCIDX): Remove definition; this isn't supported by | |
1560 | PENDING_FILL, and you can get the intended effect gracefully by | |
1561 | calling PENDING_SCHED directly. | |
1562 | ||
fb891446 BE |
1563 | 2001-02-23 Ben Elliston <bje@redhat.com> |
1564 | ||
1565 | * sim-main.h (ENGINE_ISSUE_PREFIX_HOOK): Only define if not | |
1566 | already defined elsewhere. | |
1567 | ||
8030f857 BE |
1568 | 2001-02-19 Ben Elliston <bje@redhat.com> |
1569 | ||
1570 | * sim-main.h (sim_monitor): Return an int. | |
1571 | * interp.c (sim_monitor): Add return values. | |
1572 | (signal_exception): Handle error conditions from sim_monitor. | |
1573 | ||
56b48a7a CD |
1574 | 2001-02-08 Ben Elliston <bje@redhat.com> |
1575 | ||
1576 | * sim-main.c (load_memory): Pass cia to sim_core_read* functions. | |
1577 | (store_memory): Likewise, pass cia to sim_core_write*. | |
1578 | ||
d3ee60d9 FCE |
1579 | 2000-10-19 Frank Ch. Eigler <fche@redhat.com> |
1580 | ||
1581 | On advice from Chris G. Demetriou <cgd@sibyte.com>: | |
1582 | * sim-main.h (GPR_CLEAR): Remove unused alternative macro. | |
1583 | ||
071da002 AC |
1584 | Thu Jul 27 22:02:05 2000 Andrew Cagney <cagney@b1.cygnus.com> |
1585 | ||
1586 | From Maciej W. Rozycki <macro@ds2.pg.gda.pl>: | |
1587 | * Makefile.in: Don't delete *.igen when cleaning directory. | |
1588 | ||
a28c02cd AC |
1589 | Wed Jul 19 18:50:51 2000 Andrew Cagney <cagney@b1.cygnus.com> |
1590 | ||
1591 | * m16.igen (break): Call SignalException not sim_engine_halt. | |
1592 | ||
80ee11fa AC |
1593 | Mon Jul 3 11:13:20 2000 Andrew Cagney <cagney@b1.cygnus.com> |
1594 | ||
1595 | From Jason Eckhardt: | |
1596 | * mips.igen (MOVZ.fmt, MOVN.fmt): Move conditional on GPR[RT]. | |
1597 | ||
673388c0 AC |
1598 | Tue Jun 13 20:52:07 2000 Andrew Cagney <cagney@b1.cygnus.com> |
1599 | ||
1600 | * mips.igen (MxC1, DMxC1): Fix printf formatting. | |
1601 | ||
4c0deff4 NC |
1602 | 2000-05-24 Michael Hayes <mhayes@cygnus.com> |
1603 | ||
1604 | * mips.igen (do_dmultx): Fix typo. | |
1605 | ||
eb2d80b4 AC |
1606 | Tue May 23 21:39:23 2000 Andrew Cagney <cagney@b1.cygnus.com> |
1607 | ||
1608 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
1609 | ||
dd37a34b AC |
1610 | Fri Apr 28 20:48:36 2000 Andrew Cagney <cagney@b1.cygnus.com> |
1611 | ||
1612 | * mips.igen (DMxC1): Fix format arguments for sim_io_eprintf call. | |
1613 | ||
4c0deff4 NC |
1614 | 2000-04-12 Frank Ch. Eigler <fche@redhat.com> |
1615 | ||
1616 | * sim-main.h (GPR_CLEAR): Define macro. | |
1617 | ||
e30db738 AC |
1618 | Mon Apr 10 00:07:09 2000 Andrew Cagney <cagney@b1.cygnus.com> |
1619 | ||
1620 | * interp.c (decode_coproc): Output long using %lx and not %s. | |
1621 | ||
cb7450ea FCE |
1622 | 2000-03-21 Frank Ch. Eigler <fche@redhat.com> |
1623 | ||
1624 | * interp.c (sim_open): Sort & extend dummy memory regions for | |
1625 | --board=jmr3904 for eCos. | |
1626 | ||
a3027dd7 FCE |
1627 | 2000-03-02 Frank Ch. Eigler <fche@redhat.com> |
1628 | ||
1629 | * configure: Regenerated. | |
1630 | ||
1631 | Tue Feb 8 18:35:01 2000 Donald Lindsay <dlindsay@hound.cygnus.com> | |
1632 | ||
1633 | * interp.c, mips.igen: all 5 DEADC0DE situations now have sim_io_eprintf | |
1634 | calls, conditional on the simulator being in verbose mode. | |
1635 | ||
dfcd3bfb JM |
1636 | Fri Feb 4 09:45:15 2000 Donald Lindsay <dlindsay@cygnus.com> |
1637 | ||
1638 | * sim-main.c (cache_op): Added case arm so that CACHE ops to a secondary | |
1639 | cache don't get ReservedInstruction traps. | |
1640 | ||
c2d11a7d JM |
1641 | 1999-11-29 Mark Salter <msalter@cygnus.com> |
1642 | ||
1643 | * dv-tx3904sio.c (tx3904sio_io_write_buffer): Use write value as a mask | |
1644 | to clear status bits in sdisr register. This is how the hardware works. | |
1645 | ||
1646 | * interp.c (sim_open): Added more memory aliases for jmr3904 hardware | |
1647 | being used by cygmon. | |
1648 | ||
4ce44c66 JM |
1649 | 1999-11-11 Andrew Haley <aph@cygnus.com> |
1650 | ||
1651 | * interp.c (decode_coproc): Correctly handle DMFC0 and DMTC0 | |
1652 | instructions. | |
1653 | ||
cff3e48b JM |
1654 | Thu Sep 9 15:12:08 1999 Geoffrey Keating <geoffk@cygnus.com> |
1655 | ||
1656 | * mips.igen (MULT): Correct previous mis-applied patch. | |
1657 | ||
d4f3574e SS |
1658 | Tue Sep 7 13:34:54 1999 Geoffrey Keating <geoffk@cygnus.com> |
1659 | ||
1660 | * mips.igen (delayslot32): Handle sequence like | |
1661 | mtc1 $at,$f12 ; jal fp_add ; mov.s $f13,$f12 | |
1662 | correctly by calling ENGINE_ISSUE_PREFIX_HOOK() before issue. | |
1663 | (MULT): Actually pass the third register... | |
1664 | ||
1665 | 1999-09-03 Mark Salter <msalter@cygnus.com> | |
1666 | ||
1667 | * interp.c (sim_open): Added more memory aliases for additional | |
1668 | hardware being touched by cygmon on jmr3904 board. | |
1669 | ||
1670 | Thu Sep 2 18:15:53 1999 Andrew Cagney <cagney@b1.cygnus.com> | |
1671 | ||
1672 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
1673 | ||
a0b3c4fd JM |
1674 | Tue Jul 27 16:36:51 1999 Andrew Cagney <cagney@amy.cygnus.com> |
1675 | ||
1676 | * interp.c (sim_store_register): Handle case where client - GDB - | |
1677 | specifies that a 4 byte register is 8 bytes in size. | |
1678 | (sim_fetch_register): Ditto. | |
72f4393d | 1679 | |
adf40b2e JM |
1680 | 1999-07-14 Frank Ch. Eigler <fche@cygnus.com> |
1681 | ||
1682 | Implement "sim firmware" option, inspired by jimb's version of 1998-01. | |
1683 | * interp.c (firmware_option_p): New global flag: "sim firmware" given. | |
1684 | (idt_monitor_base): Base address for IDT monitor traps. | |
1685 | (pmon_monitor_base): Ditto for PMON. | |
1686 | (lsipmon_monitor_base): Ditto for LSI PMON. | |
1687 | (MONITOR_BASE, MONITOR_SIZE): Removed macros. | |
1688 | (mips_option): Add "firmware" option with new OPTION_FIRMWARE key. | |
1689 | (sim_firmware_command): New function. | |
1690 | (mips_option_handler): Call it for OPTION_FIRMWARE. | |
1691 | (sim_open): Allocate memory for idt_monitor region. If "--board" | |
1692 | option was given, add no monitor by default. Add BREAK hooks only if | |
1693 | monitors are also there. | |
72f4393d | 1694 | |
43e526b9 JM |
1695 | Mon Jul 12 00:02:27 1999 Andrew Cagney <cagney@amy.cygnus.com> |
1696 | ||
1697 | * interp.c (sim_monitor): Flush output before reading input. | |
1698 | ||
1699 | Sun Jul 11 19:28:11 1999 Andrew Cagney <cagney@b1.cygnus.com> | |
1700 | ||
1701 | * tconfig.in (SIM_HANDLES_LMA): Always define. | |
1702 | ||
1703 | Thu Jul 8 16:06:59 1999 Andrew Cagney <cagney@b1.cygnus.com> | |
1704 | ||
1705 | From Mark Salter <msalter@cygnus.com>: | |
1706 | * interp.c (BOARD_BSP): Define. Add to list of possible boards. | |
1707 | (sim_open): Add setup for BSP board. | |
1708 | ||
9846de1b JM |
1709 | Wed Jul 7 12:45:58 1999 Andrew Cagney <cagney@b1.cygnus.com> |
1710 | ||
1711 | * mips.igen (MULT, MULTU): Add syntax for two operand version. | |
1712 | (DMFC0, DMTC0): Recognize. Call DecodeCoproc which will report | |
1713 | them as unimplemented. | |
1714 | ||
cd0fc7c3 SS |
1715 | 1999-05-08 Felix Lee <flee@cygnus.com> |
1716 | ||
1717 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
72f4393d | 1718 | |
7a292a7a SS |
1719 | 1999-04-21 Frank Ch. Eigler <fche@cygnus.com> |
1720 | ||
1721 | * mips.igen (bc0f): For the TX39 only, decode this as a no-op stub. | |
1722 | ||
1723 | Thu Apr 15 14:15:17 1999 Andrew Cagney <cagney@amy.cygnus.com> | |
1724 | ||
1725 | * configure.in: Any mips64vr5*-*-* target should have | |
1726 | -DTARGET_ENABLE_FR=1. | |
1727 | (default_endian): Any mips64vr*el-*-* target should default to | |
1728 | LITTLE_ENDIAN. | |
1729 | * configure: Re-generate. | |
1730 | ||
1731 | 1999-02-19 Gavin Romig-Koch <gavin@cygnus.com> | |
1732 | ||
1733 | * mips.igen (ldl): Extend from _16_, not 32. | |
1734 | ||
1735 | Wed Jan 27 18:51:38 1999 Andrew Cagney <cagney@chook.cygnus.com> | |
1736 | ||
1737 | * interp.c (sim_store_register): Force registers written to by GDB | |
1738 | into an un-interpreted state. | |
1739 | ||
c906108c SS |
1740 | 1999-02-05 Frank Ch. Eigler <fche@cygnus.com> |
1741 | ||
1742 | * dv-tx3904sio.c (tx3904sio_tickle): After a polled I/O from the | |
1743 | CPU, start periodic background I/O polls. | |
72f4393d | 1744 | (tx3904sio_poll): New function: periodic I/O poller. |
c906108c SS |
1745 | |
1746 | 1998-12-30 Frank Ch. Eigler <fche@cygnus.com> | |
1747 | ||
1748 | * mips.igen (BREAK): Call signal_exception instead of sim_engine_halt. | |
72f4393d | 1749 | |
c906108c SS |
1750 | Tue Dec 29 16:03:53 1998 Rainer Orth <ro@TechFak.Uni-Bielefeld.DE> |
1751 | ||
1752 | * configure.in, configure (mips64vr5*-*-*): Added missing ;; in | |
1753 | case statement. | |
1754 | ||
1755 | 1998-12-29 Frank Ch. Eigler <fche@cygnus.com> | |
72f4393d L |
1756 | |
1757 | * interp.c (sim_open): Allocate jm3904 memory in smaller chunks. | |
c906108c SS |
1758 | (load_word): Call SIM_CORE_SIGNAL hook on error. |
1759 | (signal_exception): Call SIM_CPU_EXCEPTION_TRIGGER hook before | |
1760 | starting. For exception dispatching, pass PC instead of NULL_CIA. | |
1761 | (decode_coproc): Use COP0_BADVADDR to store faulting address. | |
72f4393d | 1762 | * sim-main.h (COP0_BADVADDR): Define. |
c906108c SS |
1763 | (SIM_CORE_SIGNAL): Define hook to call mips_core_signal. |
1764 | (SIM_CPU_EXCEPTION*): Define hooks to call mips_cpu_exception*(). | |
72f4393d | 1765 | (_sim_cpu): Add exc_* fields to store register value snapshots. |
c906108c SS |
1766 | * mips.igen (*): Replace memory-related SignalException* calls |
1767 | with references to SIM_CORE_SIGNAL hook. | |
72f4393d | 1768 | |
c906108c SS |
1769 | * dv-tx3904irc.c (tx3904irc_port_event): printf format warning |
1770 | fix. | |
1771 | * sim-main.c (*): Minor warning cleanups. | |
72f4393d | 1772 | |
c906108c SS |
1773 | 1998-12-24 Gavin Romig-Koch <gavin@cygnus.com> |
1774 | ||
1775 | * m16.igen (DADDIU5): Correct type-o. | |
1776 | ||
1777 | Mon Dec 21 10:34:48 1998 Andrew Cagney <cagney@chook> | |
1778 | ||
1779 | * mips.igen (do_ddiv, do_ddivu): Pacify GCC. Update hi/lo via tmp | |
1780 | variables. | |
1781 | ||
1782 | Wed Dec 16 18:20:28 1998 Andrew Cagney <cagney@chook> | |
1783 | ||
1784 | * Makefile.in (SIM_EXTRA_CFLAGS): No longer need to add .../newlib | |
1785 | to include path. | |
1786 | (interp.o): Add dependency on itable.h | |
1787 | (oengine.c, gencode): Delete remaining references. | |
1788 | (BUILT_SRC_FROM_GEN): Clean up. | |
72f4393d | 1789 | |
c906108c | 1790 | 1998-12-16 Gavin Romig-Koch <gavin@cygnus.com> |
72f4393d | 1791 | |
c906108c SS |
1792 | * vr4run.c: New. |
1793 | * Makefile.in (SIM_HACK_OBJ,HACK_OBJS,HACK_GEN_SRCS,libhack.a, | |
1794 | tmp-hack,tmp-m32-hack,tmp-m16-hack,tmp-itable-hack, | |
1795 | tmp-run-hack) : New. | |
1796 | * m16.igen (LD,DADDIU,DADDUI5,DADJSP,DADDIUSP,DADDI,DADDU,DSUBU, | |
72f4393d | 1797 | DSLL,DSRL,DSRA,DSLLV,DSRAV,DMULT,DMULTU,DDIV,DDIVU,JALX32,JALX): |
c906108c SS |
1798 | Drop the "64" qualifier to get the HACK generator working. |
1799 | Use IMMEDIATE rather than IMMED. Use SHAMT rather than SHIFT. | |
1800 | * mips.igen (do_daddiu,do_ddiv,do_divu): Remove the 64-only | |
1801 | qualifier to get the hack generator working. | |
1802 | (do_dsll,do_dsllv,do_dsra,do_dsrl,do_dsrlv): New. | |
1803 | (DSLL): Use do_dsll. | |
1804 | (DSLLV): Use do_dsllv. | |
1805 | (DSRA): Use do_dsra. | |
1806 | (DSRL): Use do_dsrl. | |
1807 | (DSRLV): Use do_dsrlv. | |
1808 | (BC1): Move *vr4100 to get the HACK generator working. | |
72f4393d | 1809 | (CxC1, DMxC1, MxC1,MACCU,MACCHI,MACCHIU): Rename to |
c906108c SS |
1810 | get the HACK generator working. |
1811 | (MACC) Rename to get the HACK generator working. | |
1812 | (DMACC,MACCS,DMACCS): Add the 64. | |
72f4393d | 1813 | |
c906108c SS |
1814 | 1998-12-12 Gavin Romig-Koch <gavin@cygnus.com> |
1815 | ||
1816 | * mips.igen (BC1): Renamed to BC1a and BC1b to avoid conflicts. | |
1817 | * sim-main.h (SizeFGR): Handle TARGET_ENABLE_FR. | |
72f4393d | 1818 | |
c906108c SS |
1819 | 1998-12-11 Gavin Romig-Koch <gavin@cygnus.com> |
1820 | ||
1821 | * mips/interp.c (DEBUG): Cleanups. | |
1822 | ||
1823 | 1998-12-10 Frank Ch. Eigler <fche@cygnus.com> | |
1824 | ||
1825 | * dv-tx3904sio.c (tx3904sio_io_read_buffer): Endianness fixes. | |
1826 | (tx3904sio_tickle): fflush after a stdout character output. | |
72f4393d | 1827 | |
c906108c SS |
1828 | 1998-12-03 Frank Ch. Eigler <fche@cygnus.com> |
1829 | ||
1830 | * interp.c (sim_close): Uninstall modules. | |
1831 | ||
1832 | Wed Nov 25 13:41:03 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
1833 | ||
1834 | * sim-main.h, interp.c (sim_monitor): Change to global | |
1835 | function. | |
1836 | ||
1837 | Wed Nov 25 17:33:24 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
1838 | ||
1839 | * configure.in (vr4100): Only include vr4100 instructions in | |
1840 | simulator. | |
1841 | * configure: Re-generate. | |
1842 | * m16.igen (*): Tag all mips16 instructions as also being vr4100. | |
1843 | ||
1844 | Mon Nov 23 18:20:36 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
1845 | ||
1846 | * Makefile.in (SIM_CFLAGS): Do not define WITH_IGEN. | |
1847 | * sim-main.h, sim-main.c, interp.c: Delete #if WITH_IGEN keeping | |
1848 | true alternative. | |
1849 | ||
1850 | * configure.in (sim_default_gen, sim_use_gen): Replace with | |
1851 | sim_gen. | |
1852 | (--enable-sim-igen): Delete config option. Always using IGEN. | |
1853 | * configure: Re-generate. | |
72f4393d | 1854 | |
c906108c SS |
1855 | * Makefile.in (gencode): Kill, kill, kill. |
1856 | * gencode.c: Ditto. | |
72f4393d | 1857 | |
c906108c SS |
1858 | Mon Nov 23 18:07:36 1998 Andrew Cagney <cagney@b1.cygnus.com> |
1859 | ||
1860 | * configure.in: Configure mips64vr4100-elf nee mips64vr41* as a 64 | |
1861 | bit mips16 igen simulator. | |
1862 | * configure: Re-generate. | |
1863 | ||
1864 | * mips.igen (check_div_hilo, check_mult_hilo, check_mf_hilo): Mark | |
1865 | as part of vr4100 ISA. | |
1866 | * vr.igen: Mark all instructions as 64 bit only. | |
1867 | ||
1868 | Mon Nov 23 17:07:37 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
1869 | ||
1870 | * interp.c (get_cell, sim_monitor, fetch_str, CoProcPresent): | |
1871 | Pacify GCC. | |
1872 | ||
1873 | Mon Nov 23 13:23:40 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
1874 | ||
1875 | * configure.in: Configure mips-lsi-elf nee mips*lsi* as a | |
1876 | mipsIII/mips16 igen simulator. Fix sim_gen VS sim_igen typos. | |
1877 | * configure: Re-generate. | |
1878 | ||
1879 | * m16.igen (BREAK): Define breakpoint instruction. | |
1880 | (JALX32): Mark instruction as mips16 and not r3900. | |
1881 | * mips.igen (C.cond.fmt): Fix typo in instruction format. | |
1882 | ||
1883 | * sim-main.h (PENDING_FILL): Wrap C statements in do/while. | |
1884 | ||
1885 | Sat Nov 7 09:54:38 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
1886 | ||
1887 | * gencode.c (build_instruction - BREAK): For MIPS16, handle BREAK | |
1888 | insn as a debug breakpoint. | |
1889 | ||
1890 | * sim-main.h (PENDING_SLOT_BIT): Fix, was incorrectly defined as | |
1891 | pending.slot_size. | |
1892 | (PENDING_SCHED): Clean up trace statement. | |
1893 | (PENDING_SCHED): Increment PENDING_IN and PENDING_TOTAL. | |
1894 | (PENDING_FILL): Delay write by only one cycle. | |
1895 | (PENDING_FILL): For FSRs, write fmt_uninterpreted to FPR_STATE. | |
1896 | ||
1897 | * sim-main.c (pending_tick): Clean up trace statements. Add trace | |
1898 | of pending writes. | |
1899 | (pending_tick): Fix sizes in switch statements, 4 & 8 instead of | |
1900 | 32 & 64. | |
1901 | (pending_tick): Move incrementing of index to FOR statement. | |
1902 | (pending_tick): Only update PENDING_OUT after a write has occured. | |
72f4393d | 1903 | |
c906108c SS |
1904 | * configure.in: Add explicit mips-lsi-* target. Use gencode to |
1905 | build simulator. | |
1906 | * configure: Re-generate. | |
72f4393d | 1907 | |
c906108c SS |
1908 | * interp.c (sim_engine_run OLD): Delete explicit call to |
1909 | PENDING_TICK. Now called via ENGINE_ISSUE_PREFIX_HOOK. | |
72f4393d | 1910 | |
c906108c SS |
1911 | Sat Oct 30 09:49:10 1998 Frank Ch. Eigler <fche@cygnus.com> |
1912 | ||
1913 | * dv-tx3904cpu.c (deliver_tx3904cpu_interrupt): Add dummy | |
1914 | interrupt level number to match changed SignalExceptionInterrupt | |
1915 | macro. | |
1916 | ||
1917 | Fri Oct 9 18:02:25 1998 Doug Evans <devans@canuck.cygnus.com> | |
1918 | ||
1919 | * interp.c: #include "itable.h" if WITH_IGEN. | |
1920 | (get_insn_name): New function. | |
1921 | (sim_open): Initialize CPU_INSN_NAME,CPU_MAX_INSNS. | |
1922 | * sim-main.h (MAX_INSNS,INSN_NAME): Delete. | |
1923 | ||
1924 | Mon Sep 14 12:36:44 1998 Frank Ch. Eigler <fche@cygnus.com> | |
1925 | ||
1926 | * configure: Rebuilt to inhale new common/aclocal.m4. | |
1927 | ||
1928 | Tue Sep 1 15:39:18 1998 Frank Ch. Eigler <fche@cygnus.com> | |
1929 | ||
1930 | * dv-tx3904sio.c: Include sim-assert.h. | |
1931 | ||
1932 | Tue Aug 25 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com> | |
1933 | ||
1934 | * dv-tx3904sio.c: New file: tx3904 serial I/O module. | |
1935 | * configure.in: Add dv-tx3904sio, dv-sockser for tx39 target. | |
1936 | Reorganize target-specific sim-hardware checks. | |
1937 | * configure: rebuilt. | |
1938 | * interp.c (sim_open): For tx39 target boards, set | |
1939 | OPERATING_ENVIRONMENT, add tx3904sio devices. | |
1940 | * tconfig.in: For tx39 target, set SIM_HANDLES_LMA for loading | |
1941 | ROM executables. Install dv-sockser into sim-modules list. | |
72f4393d | 1942 | |
c906108c SS |
1943 | * dv-tx3904irc.c: Compiler warning clean-up. |
1944 | * dv-tx3904tmr.c: Compiler warning clean-up. Remove particularly | |
1945 | frequent hw-trace messages. | |
1946 | ||
1947 | Fri Jul 31 18:14:16 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
1948 | ||
1949 | * vr.igen (MulAcc): Identify as a vr4100 specific function. | |
1950 | ||
1951 | Sat Jul 25 16:03:14 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
1952 | ||
1953 | * Makefile.in (IGEN_INCLUDE): Add vr.igen. | |
1954 | ||
1955 | * vr.igen: New file. | |
1956 | (MAC/MADD16, DMAC/DMADD16): Implement using code from gencode.c. | |
1957 | * mips.igen: Define vr4100 model. Include vr.igen. | |
1958 | Mon Jun 29 09:21:07 1998 Gavin Koch <gavin@cygnus.com> | |
1959 | ||
1960 | * mips.igen (check_mf_hilo): Correct check. | |
1961 | ||
1962 | Wed Jun 17 12:20:49 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
1963 | ||
1964 | * sim-main.h (interrupt_event): Add prototype. | |
1965 | ||
1966 | * dv-tx3904tmr.c (tx3904tmr_io_write_buffer): Delete unused | |
1967 | register_ptr, register_value. | |
1968 | (deliver_tx3904tmr_tick): Fix types passed to printf fmt. | |
1969 | ||
1970 | * sim-main.h (tracefh): Make extern. | |
1971 | ||
1972 | Tue Jun 16 14:39:00 1998 Frank Ch. Eigler <fche@cygnus.com> | |
1973 | ||
1974 | * dv-tx3904tmr.c: Deschedule timer event after dispatching. | |
72f4393d | 1975 | Reduce unnecessarily high timer event frequency. |
c906108c | 1976 | * dv-tx3904cpu.c: Ditto for interrupt event. |
72f4393d | 1977 | |
c906108c SS |
1978 | Wed Jun 10 13:22:32 1998 Frank Ch. Eigler <fche@cygnus.com> |
1979 | ||
1980 | * interp.c (decode_coproc): For TX39, add stub COP0 register #7, | |
1981 | to allay warnings. | |
1982 | (interrupt_event): Made non-static. | |
72f4393d | 1983 | |
c906108c SS |
1984 | * dv-tx3904tmr.c (deliver_tx3904tmr_tick): Correct accidental |
1985 | interchange of configuration values for external vs. internal | |
1986 | clock dividers. | |
72f4393d | 1987 | |
c906108c SS |
1988 | Tue Jun 9 12:46:24 1998 Ian Carmichael <iancarm@cygnus.com> |
1989 | ||
72f4393d | 1990 | * mips.igen (BREAK): Moved code to here for |
c906108c SS |
1991 | simulator-reserved break instructions. |
1992 | * gencode.c (build_instruction): Ditto. | |
1993 | * interp.c (signal_exception): Code moved from here. Non- | |
72f4393d | 1994 | reserved instructions now use exception vector, rather |
c906108c SS |
1995 | than halting sim. |
1996 | * sim-main.h: Moved magic constants to here. | |
1997 | ||
1998 | Tue Jun 9 12:29:50 1998 Frank Ch. Eigler <fche@cygnus.com> | |
1999 | ||
2000 | * dv-tx3904cpu.c (deliver_*_interrupt,*_port_event): Set the CAUSE | |
2001 | register upon non-zero interrupt event level, clear upon zero | |
2002 | event value. | |
2003 | * dv-tx3904irc.c (*_port_event): Handle deactivated interrupt signal | |
2004 | by passing zero event value. | |
2005 | (*_io_{read,write}_buffer): Endianness fixes. | |
2006 | * dv-tx3904tmr.c (*_io_{read,write}_buffer): Endianness fixes. | |
2007 | (deliver_*_tick): Reduce sim event interval to 75% of count interval. | |
2008 | ||
2009 | * interp.c (sim_open): Added jmr3904pal board type that adds PAL-based | |
2010 | serial I/O and timer module at base address 0xFFFF0000. | |
72f4393d | 2011 | |
c906108c SS |
2012 | Tue Jun 9 11:52:29 1998 Gavin Koch <gavin@cygnus.com> |
2013 | ||
72f4393d | 2014 | * mips.igen (SWC1) : Correct the handling of ReverseEndian |
c906108c SS |
2015 | and BigEndianCPU. |
2016 | ||
2017 | Tue Jun 9 11:40:57 1998 Gavin Koch <gavin@cygnus.com> | |
2018 | ||
2019 | * configure.in (mips_fpu_bitsize) : Set this correctly for 32-bit mips | |
2020 | parts. | |
2021 | * configure: Update. | |
2022 | ||
2023 | Thu Jun 4 15:37:33 1998 Frank Ch. Eigler <fche@cygnus.com> | |
2024 | ||
2025 | * dv-tx3904tmr.c: New file - implements tx3904 timer. | |
2026 | * dv-tx3904{irc,cpu}.c: Mild reformatting. | |
2027 | * configure.in: Include tx3904tmr in hw_device list. | |
2028 | * configure: Rebuilt. | |
2029 | * interp.c (sim_open): Instantiate three timer instances. | |
2030 | Fix address typo of tx3904irc instance. | |
2031 | ||
2032 | Tue Jun 2 15:48:02 1998 Ian Carmichael <iancarm@cygnus.com> | |
2033 | ||
2034 | * interp.c (signal_exception): SystemCall exception now uses | |
2035 | the exception vector. | |
2036 | ||
2037 | Mon Jun 1 18:18:26 1998 Frank Ch. Eigler <fche@cygnus.com> | |
2038 | ||
2039 | * interp.c (decode_coproc): For TX39, add stub COP0 register #3, | |
2040 | to allay warnings. | |
2041 | ||
2042 | Fri May 29 11:40:39 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
2043 | ||
2044 | * configure.in (sim_igen_filter): Match mips*tx39 not mipst*tx39. | |
2045 | ||
2046 | Mon May 25 20:47:45 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
2047 | ||
2048 | * dv-tx3904cpu.c, dv-tx3904irc.c: Rename *_callback to *_method. | |
2049 | ||
2050 | * dv-tx3904cpu.c, dv-tx3904irc.c: Include hw-main.h and | |
2051 | sim-main.h. Declare a struct hw_descriptor instead of struct | |
2052 | hw_device_descriptor. | |
2053 | ||
2054 | Mon May 25 12:41:38 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
2055 | ||
2056 | * mips.igen (do_store_left, do_load_left): Compute nr of left and | |
2057 | right bits and then re-align left hand bytes to correct byte | |
2058 | lanes. Fix incorrect computation in do_store_left when loading | |
2059 | bytes from second word. | |
2060 | ||
2061 | Fri May 22 13:34:20 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
2062 | ||
2063 | * configure.in (SIM_AC_OPTION_HARDWARE): Only enable when tx3904. | |
2064 | * interp.c (sim_open): Only create a device tree when HW is | |
2065 | enabled. | |
2066 | ||
2067 | * dv-tx3904irc.c (tx3904irc_finish): Pacify GCC. | |
2068 | * interp.c (signal_exception): Ditto. | |
2069 | ||
2070 | Thu May 21 14:24:11 1998 Gavin Koch <gavin@cygnus.com> | |
2071 | ||
2072 | * gencode.c: Mark BEGEZALL as LIKELY. | |
2073 | ||
2074 | Thu May 21 18:57:19 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
2075 | ||
2076 | * sim-main.h (ALU32_END): Sign extend 32 bit results. | |
2077 | * mips.igen (ADD, SUB, ADDI, DADD, DSUB): Trace. | |
72f4393d | 2078 | |
c906108c SS |
2079 | Mon May 18 18:22:42 1998 Frank Ch. Eigler <fche@cygnus.com> |
2080 | ||
2081 | * configure.in (SIM_AC_OPTION_HARDWARE): Added common hardware | |
2082 | modules. Recognize TX39 target with "mips*tx39" pattern. | |
2083 | * configure: Rebuilt. | |
2084 | * sim-main.h (*): Added many macros defining bits in | |
2085 | TX39 control registers. | |
2086 | (SignalInterrupt): Send actual PC instead of NULL. | |
2087 | (SignalNMIReset): New exception type. | |
2088 | * interp.c (board): New variable for future use to identify | |
2089 | a particular board being simulated. | |
2090 | (mips_option_handler,mips_options): Added "--board" option. | |
2091 | (interrupt_event): Send actual PC. | |
2092 | (sim_open): Make memory layout conditional on board setting. | |
2093 | (signal_exception): Initial implementation of hardware interrupt | |
2094 | handling. Accept another break instruction variant for simulator | |
2095 | exit. | |
2096 | (decode_coproc): Implement RFE instruction for TX39. | |
2097 | (mips.igen): Decode RFE instruction as such. | |
2098 | * configure.in (tx3904cpu,tx3904irc): Added devices for tx3904. | |
2099 | * interp.c: Define "jmr3904" and "jmr3904debug" board types and | |
2100 | bbegin to implement memory map. | |
2101 | * dv-tx3904cpu.c: New file. | |
2102 | * dv-tx3904irc.c: New file. | |
2103 | ||
2104 | Wed May 13 14:40:11 1998 Gavin Koch <gavin@cygnus.com> | |
2105 | ||
2106 | * mips.igen (check_mt_hilo): Create a separate r3900 version. | |
2107 | ||
2108 | Wed May 13 14:11:46 1998 Gavin Koch <gavin@cygnus.com> | |
2109 | ||
2110 | * tx.igen (madd,maddu): Replace calls to check_op_hilo | |
2111 | with calls to check_div_hilo. | |
2112 | ||
2113 | Wed May 13 09:59:27 1998 Gavin Koch <gavin@cygnus.com> | |
2114 | ||
2115 | * mips/mips.igen (check_op_hilo,check_mult_hilo,check_div_hilo): | |
2116 | Replace check_op_hilo with check_mult_hilo and check_div_hilo. | |
72f4393d | 2117 | Add special r3900 version of do_mult_hilo. |
c906108c SS |
2118 | (do_dmultx,do_mult,do_multu): Replace calls to check_op_hilo |
2119 | with calls to check_mult_hilo. | |
2120 | (do_ddiv,do_ddivu,do_div,do_divu): Replace calls to check_op_hilo | |
2121 | with calls to check_div_hilo. | |
2122 | ||
2123 | Tue May 12 15:22:11 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
2124 | ||
2125 | * configure.in (SUBTARGET_R3900): Define for mipstx39 target. | |
2126 | Document a replacement. | |
2127 | ||
2128 | Fri May 8 17:48:19 1998 Ian Carmichael <iancarm@cygnus.com> | |
2129 | ||
2130 | * interp.c (sim_monitor): Make mon_printf work. | |
2131 | ||
2132 | Wed May 6 19:42:19 1998 Doug Evans <devans@canuck.cygnus.com> | |
2133 | ||
2134 | * sim-main.h (INSN_NAME): New arg `cpu'. | |
2135 | ||
2136 | Tue Apr 28 18:33:31 1998 Geoffrey Noer <noer@cygnus.com> | |
2137 | ||
72f4393d | 2138 | * configure: Regenerated to track ../common/aclocal.m4 changes. |
c906108c SS |
2139 | |
2140 | Sun Apr 26 15:31:55 1998 Tom Tromey <tromey@creche> | |
2141 | ||
2142 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
2143 | * config.in: Ditto. | |
2144 | ||
2145 | Sun Apr 26 15:20:01 1998 Tom Tromey <tromey@cygnus.com> | |
2146 | ||
2147 | * acconfig.h: New file. | |
2148 | * configure.in: Reverted change of Apr 24; use sinclude again. | |
2149 | ||
2150 | Fri Apr 24 14:16:40 1998 Tom Tromey <tromey@creche> | |
2151 | ||
2152 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
2153 | * config.in: Ditto. | |
2154 | ||
2155 | Fri Apr 24 11:19:20 1998 Tom Tromey <tromey@cygnus.com> | |
2156 | ||
2157 | * configure.in: Don't call sinclude. | |
2158 | ||
2159 | Fri Apr 24 11:35:01 1998 Andrew Cagney <cagney@chook.cygnus.com> | |
2160 | ||
2161 | * mips.igen (do_store_left): Pass 0 not NULL to store_memory. | |
2162 | ||
2163 | Tue Apr 21 11:59:50 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
2164 | ||
2165 | * mips.igen (ERET): Implement. | |
2166 | ||
2167 | * interp.c (decode_coproc): Return sign-extended EPC. | |
2168 | ||
2169 | * mips.igen (ANDI, LUI, MFC0): Add tracing code. | |
2170 | ||
2171 | * interp.c (signal_exception): Do not ignore Trap. | |
2172 | (signal_exception): On TRAP, restart at exception address. | |
2173 | (HALT_INSTRUCTION, HALT_INSTRUCTION_MASK): Define. | |
2174 | (signal_exception): Update. | |
2175 | (sim_open): Patch V_COMMON interrupt vector with an abort sequence | |
2176 | so that TRAP instructions are caught. | |
2177 | ||
2178 | Mon Apr 20 11:26:55 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
2179 | ||
2180 | * sim-main.h (struct hilo_access, struct hilo_history): Define, | |
2181 | contains HI/LO access history. | |
2182 | (struct _sim_cpu): Make hiaccess and loaccess of type hilo_access. | |
2183 | (HIACCESS, LOACCESS): Delete, replace with | |
2184 | (HIHISTORY, LOHISTORY): New macros. | |
2185 | (CHECKHILO): Delete all, moved to mips.igen | |
72f4393d | 2186 | |
c906108c SS |
2187 | * gencode.c (build_instruction): Do not generate checks for |
2188 | correct HI/LO register usage. | |
2189 | ||
2190 | * interp.c (old_engine_run): Delete checks for correct HI/LO | |
2191 | register usage. | |
2192 | ||
2193 | * mips.igen (check_mt_hilo, check_mf_hilo, check_op_hilo, | |
2194 | check_mf_cycles): New functions. | |
2195 | (do_mfhi, do_mflo, "mthi", "mtlo", do_ddiv, do_ddivu, do_div, | |
2196 | do_divu, domultx, do_mult, do_multu): Use. | |
2197 | ||
2198 | * tx.igen ("madd", "maddu"): Use. | |
72f4393d | 2199 | |
c906108c SS |
2200 | Wed Apr 15 18:31:54 1998 Andrew Cagney <cagney@b1.cygnus.com> |
2201 | ||
2202 | * mips.igen (DSRAV): Use function do_dsrav. | |
2203 | (SRAV): Use new function do_srav. | |
2204 | ||
2205 | * m16.igen (BEQZ, BNEZ): Compare GPR[TRX] not GPR[RX]. | |
2206 | (B): Sign extend 11 bit immediate. | |
2207 | (EXT-B*): Shift 16 bit immediate left by 1. | |
2208 | (ADDIU*): Don't sign extend immediate value. | |
2209 | ||
2210 | Wed Apr 15 10:32:15 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
2211 | ||
2212 | * m16run.c (sim_engine_run): Restore CIA after handling an event. | |
2213 | ||
2214 | * sim-main.h (DELAY_SLOT, NULLIFY_NEXT_INSTRUCTION): For IGEN, use | |
2215 | functions. | |
2216 | ||
2217 | * mips.igen (delayslot32, nullify_next_insn): New functions. | |
2218 | (m16.igen): Always include. | |
2219 | (do_*): Add more tracing. | |
2220 | ||
2221 | * m16.igen (delayslot16): Add NIA argument, could be called by a | |
2222 | 32 bit MIPS16 instruction. | |
72f4393d | 2223 | |
c906108c SS |
2224 | * interp.c (ifetch16): Move function from here. |
2225 | * sim-main.c (ifetch16): To here. | |
72f4393d | 2226 | |
c906108c SS |
2227 | * sim-main.c (ifetch16, ifetch32): Update to match current |
2228 | implementations of LH, LW. | |
2229 | (signal_exception): Don't print out incorrect hex value of illegal | |
2230 | instruction. | |
2231 | ||
2232 | Wed Apr 15 00:17:25 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
2233 | ||
2234 | * m16run.c (sim_engine_run): Use IMEM16 and IMEM32 to fetch an | |
2235 | instruction. | |
2236 | ||
2237 | * m16.igen: Implement MIPS16 instructions. | |
72f4393d | 2238 | |
c906108c SS |
2239 | * mips.igen (do_addiu, do_addu, do_and, do_daddiu, do_daddu, |
2240 | do_ddiv, do_ddivu, do_div, do_divu, do_dmultx, do_dmultu, do_srav, | |
2241 | do_dsubu, do_mfhi, do_mflo, do_mult, do_multu, do_nor, do_or, | |
2242 | do_sll, do_sllv, do_slt, do_slti, do_sltiu, do_sltu, do_sra, | |
2243 | do_srl, do_srlv, do_subu, do_xor, do_xori): New functions. Move | |
2244 | bodies of corresponding code from 32 bit insn to these. Also used | |
2245 | by MIPS16 versions of functions. | |
72f4393d | 2246 | |
c906108c SS |
2247 | * sim-main.h (RAIDX, T8IDX, T8, SPIDX): Define. |
2248 | (IMEM16): Drop NR argument from macro. | |
2249 | ||
2250 | Sat Apr 4 22:39:50 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
2251 | ||
2252 | * Makefile.in (SIM_OBJS): Add sim-main.o. | |
2253 | ||
2254 | * sim-main.h (address_translation, load_memory, store_memory, | |
2255 | cache_op, sync_operation, prefetch, ifetch32, pending_tick): Mark | |
2256 | as INLINE_SIM_MAIN. | |
2257 | (pr_addr, pr_uword64): Declare. | |
2258 | (sim-main.c): Include when H_REVEALS_MODULE_P. | |
72f4393d | 2259 | |
c906108c SS |
2260 | * interp.c (address_translation, load_memory, store_memory, |
2261 | cache_op, sync_operation, prefetch, ifetch32, pending_tick): Move | |
2262 | from here. | |
2263 | * sim-main.c: To here. Fix compilation problems. | |
72f4393d | 2264 | |
c906108c SS |
2265 | * configure.in: Enable inlining. |
2266 | * configure: Re-config. | |
2267 | ||
2268 | Sat Apr 4 20:36:25 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
2269 | ||
2270 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
2271 | ||
2272 | Fri Apr 3 04:32:35 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
2273 | ||
2274 | * mips.igen: Include tx.igen. | |
2275 | * Makefile.in (IGEN_INCLUDE): Add tx.igen. | |
2276 | * tx.igen: New file, contains MADD and MADDU. | |
2277 | ||
2278 | * interp.c (load_memory): When shifting bytes, use LOADDRMASK not | |
2279 | the hardwired constant `7'. | |
2280 | (store_memory): Ditto. | |
2281 | (LOADDRMASK): Move definition to sim-main.h. | |
2282 | ||
2283 | mips.igen (MTC0): Enable for r3900. | |
2284 | (ADDU): Add trace. | |
2285 | ||
2286 | mips.igen (do_load_byte): Delete. | |
2287 | (do_load, do_store, do_load_left, do_load_write, do_store_left, | |
2288 | do_store_right): New functions. | |
2289 | (SW*, LW*, SD*, LD*, SH, LH, SB, LB): Use. | |
2290 | ||
2291 | configure.in: Let the tx39 use igen again. | |
2292 | configure: Update. | |
72f4393d | 2293 | |
c906108c SS |
2294 | Thu Apr 2 10:59:39 1998 Andrew Cagney <cagney@b1.cygnus.com> |
2295 | ||
2296 | * interp.c (sim_monitor): get_mem_info returns a 4 byte quantity, | |
2297 | not an address sized quantity. Return zero for cache sizes. | |
2298 | ||
2299 | Wed Apr 1 23:47:53 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
2300 | ||
2301 | * mips.igen (r3900): r3900 does not support 64 bit integer | |
2302 | operations. | |
2303 | ||
2304 | Mon Mar 30 14:46:05 1998 Gavin Koch <gavin@cygnus.com> | |
2305 | ||
2306 | * configure.in (mipstx39*-*-*): Use gencode simulator rather | |
2307 | than igen one. | |
2308 | * configure : Rebuild. | |
72f4393d | 2309 | |
c906108c SS |
2310 | Fri Mar 27 16:15:52 1998 Andrew Cagney <cagney@b1.cygnus.com> |
2311 | ||
2312 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
2313 | ||
2314 | Fri Mar 27 15:01:50 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
2315 | ||
2316 | * interp.c (mips_option_handler): Iterate over MAX_NR_PROCESSORS. | |
2317 | ||
2318 | Wed Mar 25 16:44:27 1998 Ian Carmichael <iancarm@cygnus.com> | |
2319 | ||
2320 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
2321 | * config.in: Regenerated to track ../common/aclocal.m4 changes. | |
2322 | ||
2323 | Wed Mar 25 12:35:29 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
2324 | ||
2325 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
2326 | ||
2327 | Wed Mar 25 10:05:46 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
2328 | ||
2329 | * interp.c (Max, Min): Comment out functions. Not yet used. | |
2330 | ||
2331 | Wed Mar 18 12:38:12 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
2332 | ||
2333 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
2334 | ||
2335 | Tue Mar 17 19:05:20 1998 Frank Ch. Eigler <fche@cygnus.com> | |
2336 | ||
2337 | * Makefile.in (MIPS_EXTRA_LIBS, SIM_EXTRA_LIBS): Added | |
2338 | configurable settings for stand-alone simulator. | |
72f4393d | 2339 | |
c906108c | 2340 | * configure.in: Added X11 search, just in case. |
72f4393d | 2341 | |
c906108c SS |
2342 | * configure: Regenerated. |
2343 | ||
2344 | Wed Mar 11 14:09:10 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
2345 | ||
2346 | * interp.c (sim_write, sim_read, load_memory, store_memory): | |
2347 | Replace sim_core_*_map with read_map, write_map, exec_map resp. | |
2348 | ||
2349 | Tue Mar 3 13:58:43 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
2350 | ||
2351 | * sim-main.h (GETFCC): Return an unsigned value. | |
2352 | ||
2353 | Tue Mar 3 13:21:37 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
2354 | ||
2355 | * mips.igen (DIV): Fix check for -1 / MIN_INT. | |
2356 | (DADD): Result destination is RD not RT. | |
2357 | ||
2358 | Fri Feb 27 13:49:49 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
2359 | ||
2360 | * sim-main.h (HIACCESS, LOACCESS): Always define. | |
2361 | ||
2362 | * mdmx.igen (Maxi, Mini): Rename Max, Min. | |
2363 | ||
2364 | * interp.c (sim_info): Delete. | |
2365 | ||
2366 | Fri Feb 27 18:41:01 1998 Doug Evans <devans@canuck.cygnus.com> | |
2367 | ||
2368 | * interp.c (DECLARE_OPTION_HANDLER): Use it. | |
2369 | (mips_option_handler): New argument `cpu'. | |
2370 | (sim_open): Update call to sim_add_option_table. | |
2371 | ||
2372 | Wed Feb 25 18:56:22 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
2373 | ||
2374 | * mips.igen (CxC1): Add tracing. | |
2375 | ||
2376 | Fri Feb 20 17:43:21 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
2377 | ||
2378 | * sim-main.h (Max, Min): Declare. | |
2379 | ||
2380 | * interp.c (Max, Min): New functions. | |
2381 | ||
2382 | * mips.igen (BC1): Add tracing. | |
72f4393d | 2383 | |
c906108c | 2384 | Thu Feb 19 14:50:00 1998 John Metzler <jmetzler@cygnus.com> |
72f4393d | 2385 | |
c906108c | 2386 | * interp.c Added memory map for stack in vr4100 |
72f4393d | 2387 | |
c906108c SS |
2388 | Thu Feb 19 10:21:21 1998 Gavin Koch <gavin@cygnus.com> |
2389 | ||
2390 | * interp.c (load_memory): Add missing "break"'s. | |
2391 | ||
2392 | Tue Feb 17 12:45:35 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
2393 | ||
2394 | * interp.c (sim_store_register, sim_fetch_register): Pass in | |
2395 | length parameter. Return -1. | |
2396 | ||
2397 | Tue Feb 10 11:57:40 1998 Ian Carmichael <iancarm@cygnus.com> | |
2398 | ||
2399 | * interp.c: Added hardware init hook, fixed warnings. | |
2400 | ||
2401 | Sat Feb 7 17:16:20 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
2402 | ||
2403 | * Makefile.in (itable.h itable.c): Depend on SIM_@sim_gen@_ALL. | |
2404 | ||
2405 | Tue Feb 3 11:36:02 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
2406 | ||
2407 | * interp.c (ifetch16): New function. | |
2408 | ||
2409 | * sim-main.h (IMEM32): Rename IMEM. | |
2410 | (IMEM16_IMMED): Define. | |
2411 | (IMEM16): Define. | |
2412 | (DELAY_SLOT): Update. | |
72f4393d | 2413 | |
c906108c | 2414 | * m16run.c (sim_engine_run): New file. |
72f4393d | 2415 | |
c906108c SS |
2416 | * m16.igen: All instructions except LB. |
2417 | (LB): Call do_load_byte. | |
2418 | * mips.igen (do_load_byte): New function. | |
2419 | (LB): Call do_load_byte. | |
2420 | ||
2421 | * mips.igen: Move spec for insn bit size and high bit from here. | |
2422 | * Makefile.in (tmp-igen, tmp-m16): To here. | |
2423 | ||
2424 | * m16.dc: New file, decode mips16 instructions. | |
2425 | ||
2426 | * Makefile.in (SIM_NO_ALL): Define. | |
2427 | (tmp-m16): Generate both 16 bit and 32 bit simulator engines. | |
2428 | ||
2429 | Tue Feb 3 11:28:00 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
2430 | ||
2431 | * configure.in (mips_fpu_bitsize): For tx39, restrict floating | |
2432 | point unit to 32 bit registers. | |
2433 | * configure: Re-generate. | |
2434 | ||
2435 | Sun Feb 1 15:47:14 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
2436 | ||
2437 | * configure.in (sim_use_gen): Make IGEN the default simulator | |
2438 | generator for generic 32 and 64 bit mips targets. | |
2439 | * configure: Re-generate. | |
2440 | ||
2441 | Sun Feb 1 16:52:37 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
2442 | ||
2443 | * sim-main.h (SizeFGR): Determine from floating-point and not gpr | |
2444 | bitsize. | |
2445 | ||
2446 | * interp.c (sim_fetch_register, sim_store_register): Read/write | |
2447 | FGR from correct location. | |
2448 | (sim_open): Set size of FGR's according to | |
2449 | WITH_TARGET_FLOATING_POINT_BITSIZE. | |
72f4393d | 2450 | |
c906108c SS |
2451 | * sim-main.h (FGR): Store floating point registers in a separate |
2452 | array. | |
2453 | ||
2454 | Sun Feb 1 16:47:51 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
2455 | ||
2456 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
2457 | ||
2458 | Tue Feb 3 00:10:50 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
2459 | ||
2460 | * interp.c (ColdReset): Call PENDING_INVALIDATE. | |
2461 | ||
2462 | * sim-main.h (ENGINE_ISSUE_PREFIX_HOOK): Call PENDING_TICK. | |
2463 | ||
2464 | * interp.c (pending_tick): New function. Deliver pending writes. | |
2465 | ||
2466 | * sim-main.h (PENDING_FILL, PENDING_TICK, PENDING_SCHED, | |
2467 | PENDING_BIT, PENDING_INVALIDATE): Re-write pipeline code so that | |
2468 | it can handle mixed sized quantites and single bits. | |
72f4393d | 2469 | |
c906108c SS |
2470 | Mon Feb 2 17:43:15 1998 Andrew Cagney <cagney@b1.cygnus.com> |
2471 | ||
2472 | * interp.c (oengine.h): Do not include when building with IGEN. | |
2473 | (sim_open): Replace GPRLEN by WITH_TARGET_WORD_BITSIZE. | |
2474 | (sim_info): Ditto for PROCESSOR_64BIT. | |
2475 | (sim_monitor): Replace ut_reg with unsigned_word. | |
2476 | (*): Ditto for t_reg. | |
2477 | (LOADDRMASK): Define. | |
2478 | (sim_open): Remove defunct check that host FP is IEEE compliant, | |
2479 | using software to emulate floating point. | |
2480 | (value_fpr, ...): Always compile, was conditional on HASFPU. | |
2481 | ||
2482 | Sun Feb 1 11:15:29 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
2483 | ||
2484 | * sim-main.h (sim_state): Make the cpu array MAX_NR_PROCESSORS in | |
2485 | size. | |
2486 | ||
2487 | * interp.c (SD, CPU): Define. | |
2488 | (mips_option_handler): Set flags in each CPU. | |
2489 | (interrupt_event): Assume CPU 0 is the one being iterrupted. | |
2490 | (sim_close): Do not clear STATE, deleted anyway. | |
2491 | (sim_write, sim_read): Assume CPU zero's vm should be used for | |
2492 | data transfers. | |
2493 | (sim_create_inferior): Set the PC for all processors. | |
2494 | (sim_monitor, store_word, load_word, mips16_entry): Add cpu | |
2495 | argument. | |
2496 | (mips16_entry): Pass correct nr of args to store_word, load_word. | |
2497 | (ColdReset): Cold reset all cpu's. | |
2498 | (signal_exception): Pass cpu to sim_monitor & mips16_entry. | |
2499 | (sim_monitor, load_memory, store_memory, signal_exception): Use | |
2500 | `CPU' instead of STATE_CPU. | |
2501 | ||
2502 | ||
2503 | * sim-main.h: Replace uses of STATE_CPU with CPU. Replace sd with | |
2504 | SD or CPU_. | |
72f4393d | 2505 | |
c906108c SS |
2506 | * sim-main.h (signal_exception): Add sim_cpu arg. |
2507 | (SignalException*): Pass both SD and CPU to signal_exception. | |
2508 | * interp.c (signal_exception): Update. | |
72f4393d | 2509 | |
c906108c SS |
2510 | * sim-main.h (value_fpr, store_fpr, dotrace, ifetch32), interp.c: |
2511 | Ditto | |
2512 | (sync_operation, prefetch, cache_op, store_memory, load_memory, | |
2513 | address_translation): Ditto | |
2514 | (decode_coproc, cop_lw, cop_ld, cop_sw, cop_sd): Ditto. | |
72f4393d | 2515 | |
c906108c SS |
2516 | Sat Jan 31 18:15:41 1998 Andrew Cagney <cagney@b1.cygnus.com> |
2517 | ||
2518 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
2519 | ||
2520 | Sat Jan 31 14:49:24 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
2521 | ||
2522 | * interp.c (sim_engine_run): Add `nr_cpus' argument. | |
2523 | ||
72f4393d | 2524 | * mips.igen (model): Map processor names onto BFD name. |
c906108c SS |
2525 | |
2526 | * sim-main.h (CPU_CIA): Delete. | |
2527 | (SET_CIA, GET_CIA): Define | |
2528 | ||
2529 | Wed Jan 21 16:16:27 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
2530 | ||
2531 | * sim-main.h (GPR_SET): Define, used by igen when zeroing a | |
2532 | regiser. | |
2533 | ||
2534 | * configure.in (default_endian): Configure a big-endian simulator | |
2535 | by default. | |
2536 | * configure: Re-generate. | |
72f4393d | 2537 | |
c906108c SS |
2538 | Mon Jan 19 22:26:29 1998 Doug Evans <devans@seba> |
2539 | ||
2540 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
2541 | ||
2542 | Mon Jan 5 20:38:54 1998 Mark Alexander <marka@cygnus.com> | |
2543 | ||
2544 | * interp.c (sim_monitor): Handle Densan monitor outbyte | |
2545 | and inbyte functions. | |
2546 | ||
2547 | 1997-12-29 Felix Lee <flee@cygnus.com> | |
2548 | ||
2549 | * interp.c (sim_engine_run): msvc cpp barfs on #if (a==b!=c). | |
2550 | ||
2551 | Wed Dec 17 14:48:20 1997 Jeffrey A Law (law@cygnus.com) | |
2552 | ||
2553 | * Makefile.in (tmp-igen): Arrange for $zero to always be | |
2554 | reset to zero after every instruction. | |
2555 | ||
2556 | Mon Dec 15 23:17:11 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
2557 | ||
2558 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
2559 | * config.in: Ditto. | |
2560 | ||
2561 | Wed Dec 10 17:10:45 1997 Jeffrey A Law (law@cygnus.com) | |
2562 | ||
2563 | * mips.igen (MSUB): Fix to work like MADD. | |
2564 | * gencode.c (MSUB): Similarly. | |
2565 | ||
2566 | Thu Dec 4 09:21:05 1997 Doug Evans <devans@canuck.cygnus.com> | |
2567 | ||
2568 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
2569 | ||
2570 | Wed Nov 26 11:00:23 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
2571 | ||
2572 | * mips.igen (LWC1): Correct assembler - lwc1 not swc1. | |
2573 | ||
2574 | Sun Nov 23 01:45:20 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
2575 | ||
2576 | * sim-main.h (sim-fpu.h): Include. | |
2577 | ||
2578 | * interp.c (convert, SquareRoot, Recip, Divide, Multiply, Sub, | |
2579 | Add, Negate, AbsoluteValue, Equal, Less, Infinity, NaN): Rewrite | |
2580 | using host independant sim_fpu module. | |
2581 | ||
2582 | Thu Nov 20 19:56:22 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
2583 | ||
2584 | * interp.c (signal_exception): Report internal errors with SIGABRT | |
2585 | not SIGQUIT. | |
2586 | ||
2587 | * sim-main.h (C0_CONFIG): New register. | |
2588 | (signal.h): No longer include. | |
2589 | ||
2590 | * interp.c (decode_coproc): Allow access C0_CONFIG to register. | |
2591 | ||
2592 | Tue Nov 18 15:33:48 1997 Doug Evans <devans@canuck.cygnus.com> | |
2593 | ||
2594 | * Makefile.in (SIM_OBJS): Use $(SIM_NEW_COMMON_OBJS). | |
2595 | ||
2596 | Fri Nov 14 11:56:48 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
2597 | ||
2598 | * mips.igen: Tag vr5000 instructions. | |
2599 | (ANDI): Was missing mipsIV model, fix assembler syntax. | |
2600 | (do_c_cond_fmt): New function. | |
2601 | (C.cond.fmt): Handle mips I-III which do not support CC field | |
2602 | separatly. | |
2603 | (bc1): Handle mips IV which do not have a delaed FCC separatly. | |
2604 | (SDR): Mask paddr when BigEndianMem, not the converse as specified | |
2605 | in IV3.2 spec. | |
2606 | (DMULT, DMULTU): Force use of hosts 64bit multiplication. Handle | |
2607 | vr5000 which saves LO in a GPR separatly. | |
72f4393d | 2608 | |
c906108c SS |
2609 | * configure.in (enable-sim-igen): For vr5000, select vr5000 |
2610 | specific instructions. | |
2611 | * configure: Re-generate. | |
72f4393d | 2612 | |
c906108c SS |
2613 | Wed Nov 12 14:42:52 1997 Andrew Cagney <cagney@b1.cygnus.com> |
2614 | ||
2615 | * Makefile.in (SIM_OBJS): Add sim-fpu module. | |
2616 | ||
2617 | * interp.c (store_fpr), sim-main.h: Add separate fmt_uninterpreted_32 and | |
2618 | fmt_uninterpreted_64 bit cases to switch. Convert to | |
2619 | fmt_formatted, | |
2620 | ||
2621 | * sim-main.h (ENGINE_ISSUE_PREFIX_HOOK): Define, | |
2622 | ||
2623 | * mips.igen (SWR): Mask paddr when BigEndianMem, not the converse | |
2624 | as specified in IV3.2 spec. | |
2625 | (MTC1, DMTC1): Call StoreFPR to store the GPR in the FPR. | |
2626 | ||
2627 | Tue Nov 11 12:38:23 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
2628 | ||
2629 | * mips.igen: Delay slot branches add OFFSET to NIA not CIA. | |
2630 | (MFC0, MTC0, SWC1, LWC1, SDC1, LDC1): Implement. | |
2631 | (MTC1, MFC1, DMTC1, DMFC1, CFC1, CTC1): Implement separate non | |
2632 | PENDING_FILL versions of instructions. Simplify. | |
2633 | (X): New function. | |
2634 | (MULT, MULTU): Implement separate RD==0 and RD!=0 versions of | |
2635 | instructions. | |
2636 | (BEQZ, ..., SLT, SLTI, TLT, TLE, TLI, ...): Explicitly cast GPR to | |
2637 | a signed value. | |
2638 | (MTHI, MFHI): Disable code checking HI-LO. | |
72f4393d | 2639 | |
c906108c SS |
2640 | * sim-main.h (dotrace,tracefh), interp.c: Make dotrace & tracefh |
2641 | global. | |
2642 | (NULLIFY_NEXT_INSTRUCTION): Call dotrace. | |
2643 | ||
2644 | Thu Nov 6 16:36:35 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
2645 | ||
2646 | * gencode.c (build_mips16_operands): Replace IPC with cia. | |
2647 | ||
2648 | * interp.c (sim_monitor, signal_exception, cache_op, store_fpr, | |
2649 | value_fpr, cop_ld, cop_lw, cop_sw, cop_sd, decode_coproc): Replace | |
2650 | IPC to `cia'. | |
2651 | (UndefinedResult): Replace function with macro/function | |
2652 | combination. | |
2653 | (sim_engine_run): Don't save PC in IPC. | |
2654 | ||
2655 | * sim-main.h (IPC): Delete. | |
2656 | ||
2657 | ||
2658 | * interp.c (signal_exception, store_word, load_word, | |
2659 | address_translation, load_memory, store_memory, cache_op, | |
2660 | prefetch, sync_operation, ifetch, value_fpr, store_fpr, convert, | |
2661 | cop_lw, cop_ld, cop_sw, cop_sd, decode_coproc, sim_monitor): Add | |
2662 | current instruction address - cia - argument. | |
2663 | (sim_read, sim_write): Call address_translation directly. | |
2664 | (sim_engine_run): Rename variable vaddr to cia. | |
2665 | (signal_exception): Pass cia to sim_monitor | |
72f4393d | 2666 | |
c906108c SS |
2667 | * sim-main.h (SignalException, LoadWord, StoreWord, CacheOp, |
2668 | Prefetch, SyncOperation, ValueFPR, StoreFPR, Convert, COP_LW, | |
2669 | COP_LD, COP_SW, COP_SD, DecodeCoproc): Update. | |
2670 | ||
2671 | * sim-main.h (SignalExceptionSimulatorFault): Delete definition. | |
2672 | * interp.c (sim_open): Replace SignalExceptionSimulatorFault with | |
2673 | SIM_ASSERT. | |
72f4393d | 2674 | |
c906108c SS |
2675 | * interp.c (signal_exception): Pass restart address to |
2676 | sim_engine_restart. | |
2677 | ||
2678 | * Makefile.in (semantics.o, engine.o, support.o, itable.o, | |
2679 | idecode.o): Add dependency. | |
2680 | ||
2681 | * sim-main.h (SIM_ENGINE_HALT_HOOK, SIM_ENGINE_RESUME_HOOK): | |
2682 | Delete definitions | |
2683 | (DELAY_SLOT): Update NIA not PC with branch address. | |
2684 | (NULLIFY_NEXT_INSTRUCTION): Set NIA to instruction after next. | |
2685 | ||
2686 | * mips.igen: Use CIA not PC in branch calculations. | |
2687 | (illegal): Call SignalException. | |
2688 | (BEQ, ADDIU): Fix assembler. | |
2689 | ||
2690 | Wed Nov 5 12:19:56 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
2691 | ||
2692 | * m16.igen (JALX): Was missing. | |
2693 | ||
2694 | * configure.in (enable-sim-igen): New configuration option. | |
2695 | * configure: Re-generate. | |
72f4393d | 2696 | |
c906108c SS |
2697 | * sim-main.h (MAX_INSNS, INSN_NAME): Define. |
2698 | ||
2699 | * interp.c (load_memory, store_memory): Delete parameter RAW. | |
2700 | (sim_read, sim_write): Use sim_core_{read,write}_buffer directly | |
2701 | bypassing {load,store}_memory. | |
2702 | ||
2703 | * sim-main.h (ByteSwapMem): Delete definition. | |
2704 | ||
2705 | * Makefile.in (SIM_OBJS): Add sim-memopt module. | |
2706 | ||
2707 | * interp.c (sim_do_command, sim_commands): Delete mips specific | |
2708 | commands. Handled by module sim-options. | |
72f4393d | 2709 | |
c906108c SS |
2710 | * sim-main.h (SIM_HAVE_FLATMEM): Undefine, use sim-core.o module. |
2711 | (WITH_MODULO_MEMORY): Define. | |
2712 | ||
2713 | * interp.c (sim_info): Delete code printing memory size. | |
2714 | ||
2715 | * interp.c (mips_size): Nee sim_size, delete function. | |
2716 | (power2): Delete. | |
2717 | (monitor, monitor_base, monitor_size): Delete global variables. | |
2718 | (sim_open, sim_close): Delete code creating monitor and other | |
2719 | memory regions. Use sim-memopts module, via sim_do_commandf, to | |
2720 | manage memory regions. | |
2721 | (load_memory, store_memory): Use sim-core for memory model. | |
72f4393d | 2722 | |
c906108c SS |
2723 | * interp.c (address_translation): Delete all memory map code |
2724 | except line forcing 32 bit addresses. | |
2725 | ||
2726 | Wed Nov 5 11:21:11 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
2727 | ||
2728 | * sim-main.h (WITH_TRACE): Delete definition. Enables common | |
2729 | trace options. | |
2730 | ||
2731 | * interp.c (logfh, logfile): Delete globals. | |
2732 | (sim_open, sim_close): Delete code opening & closing log file. | |
2733 | (mips_option_handler): Delete -l and -n options. | |
2734 | (OPTION mips_options): Ditto. | |
2735 | ||
2736 | * interp.c (OPTION mips_options): Rename option trace to dinero. | |
2737 | (mips_option_handler): Update. | |
2738 | ||
2739 | Wed Nov 5 09:35:59 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
2740 | ||
2741 | * interp.c (fetch_str): New function. | |
2742 | (sim_monitor): Rewrite using sim_read & sim_write. | |
2743 | (sim_open): Check magic number. | |
2744 | (sim_open): Write monitor vectors into memory using sim_write. | |
2745 | (MONITOR_BASE, MONITOR_SIZE, MEM_SIZE): Define. | |
2746 | (sim_read, sim_write): Simplify - transfer data one byte at a | |
2747 | time. | |
2748 | (load_memory, store_memory): Clarify meaning of parameter RAW. | |
2749 | ||
2750 | * sim-main.h (isHOST): Defete definition. | |
2751 | (isTARGET): Mark as depreciated. | |
2752 | (address_translation): Delete parameter HOST. | |
2753 | ||
2754 | * interp.c (address_translation): Delete parameter HOST. | |
2755 | ||
2756 | Wed Oct 29 11:13:56 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
2757 | ||
72f4393d | 2758 | * mips.igen: |
c906108c SS |
2759 | |
2760 | * Makefile.in (IGEN_INCLUDE): Files included by mips.igen. | |
2761 | (tmp-igen, tmp-m16): Depend on IGEN_INCLUDE. | |
2762 | ||
2763 | Tue Oct 28 11:06:47 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
2764 | ||
2765 | * mips.igen: Add model filter field to records. | |
2766 | ||
2767 | Mon Oct 27 17:53:59 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
2768 | ||
2769 | * Makefile.in (SIM_NO_CFLAGS): Define. Define WITH_IGEN=0. | |
72f4393d | 2770 | |
c906108c SS |
2771 | interp.c (sim_engine_run): Do not compile function sim_engine_run |
2772 | when WITH_IGEN == 1. | |
2773 | ||
2774 | * configure.in (sim_igen_flags, sim_m16_flags): Set according to | |
2775 | target architecture. | |
2776 | ||
2777 | Makefile.in (tmp-igen, tmp-m16): Drop -F and -M options to | |
2778 | igen. Replace with configuration variables sim_igen_flags / | |
2779 | sim_m16_flags. | |
2780 | ||
2781 | * m16.igen: New file. Copy mips16 insns here. | |
2782 | * mips.igen: From here. | |
2783 | ||
2784 | Mon Oct 27 13:53:59 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
2785 | ||
2786 | * Makefile.in (SIM_NO_OBJ): Define, move SIM_M16_OBJ, SIM_IGEN_OBJ | |
2787 | to top. | |
2788 | (tmp-igen, tmp-m16): Pass -I srcdir to igen. | |
2789 | ||
2790 | Sat Oct 25 16:51:40 1997 Gavin Koch <gavin@cygnus.com> | |
2791 | ||
2792 | * gencode.c (build_instruction): Follow sim_write's lead in using | |
2793 | BigEndianMem instead of !ByteSwapMem. | |
2794 | ||
2795 | Fri Oct 24 17:41:49 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
2796 | ||
2797 | * configure.in (sim_gen): Dependent on target, select type of | |
2798 | generator. Always select old style generator. | |
2799 | ||
2800 | configure: Re-generate. | |
2801 | ||
2802 | Makefile.in (tmp-igen, tmp-m16, clean-m16, clean-igen): New | |
2803 | targets. | |
2804 | (SIM_M16_CFLAGS, SIM_M16_ALL, SIM_M16_OBJ, BUILT_SRC_FROM_M16, | |
2805 | SIM_IGEN_CFLAGS, SIM_IGEN_ALL, SIM_IGEN_OBJ, BUILT_SRC_FROM_IGEN, | |
2806 | IGEN_TRACE, IGEN_INSN, IGEN_DC): Define | |
2807 | (SIM_EXTRA_CFLAGS, SIM_EXTRA_ALL, SIM_OBJS): Add member | |
2808 | SIM_@sim_gen@_*, set by autoconf. | |
72f4393d | 2809 | |
c906108c SS |
2810 | Wed Oct 22 12:52:06 1997 Andrew Cagney <cagney@b1.cygnus.com> |
2811 | ||
2812 | * sim-main.h (NULLIFY_NEXT_INSTRUCTION, DELAY_SLOT): Define. | |
2813 | ||
2814 | * interp.c (ColdReset): Remove #ifdef HASFPU, check | |
2815 | CURRENT_FLOATING_POINT instead. | |
2816 | ||
2817 | * interp.c (ifetch32): New function. Fetch 32 bit instruction. | |
2818 | (address_translation): Raise exception InstructionFetch when | |
2819 | translation fails and isINSTRUCTION. | |
72f4393d | 2820 | |
c906108c SS |
2821 | * interp.c (sim_open, sim_write, sim_monitor, store_word, |
2822 | sim_engine_run): Change type of of vaddr and paddr to | |
2823 | address_word. | |
2824 | (address_translation, prefetch, load_memory, store_memory, | |
2825 | cache_op): Change type of vAddr and pAddr to address_word. | |
2826 | ||
2827 | * gencode.c (build_instruction): Change type of vaddr and paddr to | |
2828 | address_word. | |
2829 | ||
2830 | Mon Oct 20 15:29:04 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
2831 | ||
2832 | * sim-main.h (ALU64_END, ALU32_END): Use ALU*_OVERFLOW_RESULT | |
2833 | macro to obtain result of ALU op. | |
2834 | ||
2835 | Tue Oct 21 17:39:14 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
2836 | ||
2837 | * interp.c (sim_info): Call profile_print. | |
2838 | ||
2839 | Mon Oct 20 13:31:20 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
2840 | ||
2841 | * Makefile.in (SIM_OBJS): Add sim-profile.o module. | |
2842 | ||
2843 | * sim-main.h (WITH_PROFILE): Do not define, defined in | |
2844 | common/sim-config.h. Use sim-profile module. | |
2845 | (simPROFILE): Delete defintion. | |
2846 | ||
2847 | * interp.c (PROFILE): Delete definition. | |
2848 | (mips_option_handler): Delete 'p', 'y' and 'x' profile options. | |
2849 | (sim_close): Delete code writing profile histogram. | |
2850 | (mips_set_profile, mips_set_profile_size, writeout16, writeout32): | |
2851 | Delete. | |
2852 | (sim_engine_run): Delete code profiling the PC. | |
2853 | ||
2854 | Mon Oct 20 13:31:20 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
2855 | ||
2856 | * sim-main.h (SIGNEXTEND): Force type of result to unsigned_word. | |
2857 | ||
2858 | * interp.c (sim_monitor): Make register pointers of type | |
2859 | unsigned_word*. | |
2860 | ||
2861 | * sim-main.h: Make registers of type unsigned_word not | |
2862 | signed_word. | |
2863 | ||
2864 | Thu Oct 16 10:31:39 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
2865 | ||
2866 | * interp.c (sync_operation): Rename from SyncOperation, make | |
2867 | global, add SD argument. | |
2868 | (prefetch): Rename from Prefetch, make global, add SD argument. | |
2869 | (decode_coproc): Make global. | |
2870 | ||
2871 | * sim-main.h (SyncOperation, DecodeCoproc, Pefetch): Define. | |
2872 | ||
2873 | * gencode.c (build_instruction): Generate DecodeCoproc not | |
2874 | decode_coproc calls. | |
2875 | ||
2876 | * interp.c (SETFCC, GETFCC, PREVCOC1): Move to sim-main.h | |
2877 | (SizeFGR): Move to sim-main.h | |
2878 | (simHALTEX, simHALTIN, simTRACE, simPROFILE, simDELAYSLOT, | |
2879 | simSIGINT, simJALDELAYSLOT): Move to sim-main.h | |
2880 | (FP_FLAGS, FP_ENABLE, FP_CAUSE, IR, UF, OF, DZ, IO, UO): Move to | |
2881 | sim-main.h. | |
2882 | (FP_FS, FP_MASK_RM, FP_SH_RM, FP_RM_NEAREST, FP_RM_TOPINF, | |
2883 | FP_RM_TOMINF, GETRM): Move to sim-main.h. | |
2884 | (Uncached, CachedNoncoherent, CachedCoherent, Cached, | |
2885 | isINSTRUCTION, ..., AccessLength_BYTE, ...): Move to sim-main.h. | |
2886 | (UserMode, BigEndianMem, ByteSwapMem, ReverseEndian, | |
2887 | BigEndianCPU, status_KSU_mask, ...). Moved to sim-main.h | |
72f4393d | 2888 | |
c906108c SS |
2889 | * sim-main.h (ALU32_END, ALU64_END): Define. When overflow raise |
2890 | exception. | |
2891 | (sim-alu.h): Include. | |
2892 | (NULLIFY_NIA, NULL_CIA, CPU_CIA): Define. | |
2893 | (sim_cia): Typedef to instruction_address. | |
72f4393d | 2894 | |
c906108c SS |
2895 | Thu Oct 16 10:31:41 1997 Andrew Cagney <cagney@b1.cygnus.com> |
2896 | ||
2897 | * Makefile.in (interp.o): Rename generated file engine.c to | |
2898 | oengine.c. | |
72f4393d | 2899 | |
c906108c | 2900 | * interp.c: Update. |
72f4393d | 2901 | |
c906108c SS |
2902 | Thu Oct 16 10:31:40 1997 Andrew Cagney <cagney@b1.cygnus.com> |
2903 | ||
2904 | * gencode.c (build_instruction): Use FPR_STATE not fpr_state. | |
72f4393d | 2905 | |
c906108c SS |
2906 | Thu Oct 16 10:31:39 1997 Andrew Cagney <cagney@b1.cygnus.com> |
2907 | ||
2908 | * gencode.c (build_instruction): For "FPSQRT", output correct | |
2909 | number of arguments to Recip. | |
72f4393d | 2910 | |
c906108c SS |
2911 | Tue Oct 14 17:38:18 1997 Andrew Cagney <cagney@b1.cygnus.com> |
2912 | ||
2913 | * Makefile.in (interp.o): Depends on sim-main.h | |
2914 | ||
2915 | * interp.c (mips16_entry, ColdReset,dotrace): Add SD argument. Use GPR not registers. | |
2916 | ||
2917 | * sim-main.h (sim_cpu): Add registers, register_widths, fpr_state, | |
2918 | ipc, dspc, pending_*, hiaccess, loaccess, state, dsstate fields. | |
2919 | (REGISTERS, REGISTER_WIDTHS, FPR_STATE, IPC, DSPC, PENDING_*, | |
2920 | STATE, DSSTATE): Define | |
2921 | (GPR, FGRIDX, ..): Define. | |
2922 | ||
2923 | * interp.c (registers, register_widths, fpr_state, ipc, dspc, | |
2924 | pending_*, hiaccess, loaccess, state, dsstate): Delete globals. | |
2925 | (GPR, FGRIDX, ...): Delete macros. | |
72f4393d | 2926 | |
c906108c | 2927 | * interp.c: Update names to match defines from sim-main.h |
72f4393d | 2928 | |
c906108c SS |
2929 | Tue Oct 14 15:11:45 1997 Andrew Cagney <cagney@b1.cygnus.com> |
2930 | ||
2931 | * interp.c (sim_monitor): Add SD argument. | |
2932 | (sim_warning): Delete. Replace calls with calls to | |
2933 | sim_io_eprintf. | |
2934 | (sim_error): Delete. Replace calls with sim_io_error. | |
2935 | (open_trace, writeout32, writeout16, getnum): Add SD argument. | |
2936 | (mips_set_profile): Rename from sim_set_profile. Add SD argument. | |
2937 | (mips_set_profile_size): Rename from sim_set_profile_size. Add SD | |
2938 | argument. | |
2939 | (mips_size): Rename from sim_size. Add SD argument. | |
2940 | ||
2941 | * interp.c (simulator): Delete global variable. | |
2942 | (callback): Delete global variable. | |
2943 | (mips_option_handler, sim_open, sim_write, sim_read, | |
2944 | sim_store_register, sim_fetch_register, sim_info, sim_do_command, | |
2945 | sim_size,sim_monitor): Use sim_io_* not callback->*. | |
2946 | (sim_open): ZALLOC simulator struct. | |
2947 | (PROFILE): Do not define. | |
2948 | ||
2949 | Tue Oct 14 13:35:48 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
2950 | ||
2951 | * interp.c (sim_open), support.h: Replace CHECKSIM macro found in | |
2952 | support.h with corresponding code. | |
2953 | ||
2954 | * sim-main.h (word64, uword64), support.h: Move definition to | |
2955 | sim-main.h. | |
2956 | (WORD64LO, WORD64HI, SET64LO, SET64HI, WORD64, UWORD64): Ditto. | |
2957 | ||
2958 | * support.h: Delete | |
2959 | * Makefile.in: Update dependencies | |
2960 | * interp.c: Do not include. | |
72f4393d | 2961 | |
c906108c SS |
2962 | Tue Oct 14 13:35:48 1997 Andrew Cagney <cagney@b1.cygnus.com> |
2963 | ||
2964 | * interp.c (address_translation, load_memory, store_memory, | |
2965 | cache_op): Rename to from AddressTranslation et.al., make global, | |
2966 | add SD argument | |
72f4393d | 2967 | |
c906108c SS |
2968 | * sim-main.h (AddressTranslation, LoadMemory, StoreMemory, |
2969 | CacheOp): Define. | |
72f4393d | 2970 | |
c906108c SS |
2971 | * interp.c (SignalException): Rename to signal_exception, make |
2972 | global. | |
2973 | ||
2974 | * interp.c (Interrupt, ...): Move definitions to sim-main.h. | |
72f4393d | 2975 | |
c906108c SS |
2976 | * sim-main.h (SignalException, SignalExceptionInterrupt, |
2977 | SignalExceptionInstructionFetch, SignalExceptionAddressStore, | |
2978 | SignalExceptionAddressLoad, SignalExceptionSimulatorFault, | |
2979 | SignalExceptionIntegerOverflow, SignalExceptionCoProcessorUnusable): | |
2980 | Define. | |
72f4393d | 2981 | |
c906108c | 2982 | * interp.c, support.h: Use. |
72f4393d | 2983 | |
c906108c SS |
2984 | Tue Oct 14 13:19:20 1997 Andrew Cagney <cagney@b1.cygnus.com> |
2985 | ||
2986 | * interp.c (ValueFPR, StoreFPR), sim-main.h: Make global, rename | |
2987 | to value_fpr / store_fpr. Add SD argument. | |
2988 | (NaN, Infinity, Less, Equal, AbsoluteValue, Negate, Add, Sub, | |
2989 | Multiply, Divide, Recip, SquareRoot, Convert): Make global. | |
2990 | ||
2991 | * sim-main.h (ValueFPR, StoreFPR): Define. | |
72f4393d | 2992 | |
c906108c SS |
2993 | Tue Oct 14 13:06:55 1997 Andrew Cagney <cagney@b1.cygnus.com> |
2994 | ||
2995 | * interp.c (sim_engine_run): Check consistency between configure | |
2996 | WITH_TARGET_WORD_BITSIZE and WITH_FLOATING_POINT and gensim GPRLEN | |
2997 | and HASFPU. | |
2998 | ||
2999 | * configure.in (mips_bitsize): Configure WITH_TARGET_WORD_BITSIZE. | |
72f4393d | 3000 | (mips_fpu): Configure WITH_FLOATING_POINT. |
c906108c SS |
3001 | (mips_endian): Configure WITH_TARGET_ENDIAN. |
3002 | * configure: Update. | |
3003 | ||
3004 | Fri Oct 3 09:28:00 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
3005 | ||
3006 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
3007 | ||
3008 | Mon Sep 29 14:45:00 1997 Bob Manson <manson@charmed.cygnus.com> | |
3009 | ||
3010 | * configure: Regenerated. | |
3011 | ||
3012 | Fri Sep 26 12:48:18 1997 Mark Alexander <marka@cygnus.com> | |
3013 | ||
3014 | * interp.c: Allow Debug, DEPC, and EPC registers to be examined in GDB. | |
3015 | ||
3016 | Thu Sep 25 11:15:22 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
3017 | ||
3018 | * gencode.c (print_igen_insn_models): Assume certain architectures | |
3019 | include all mips* instructions. | |
3020 | (print_igen_insn_format): Use data_size==-1 as marker for MIPS16 | |
3021 | instruction. | |
3022 | ||
3023 | * Makefile.in (tmp.igen): Add target. Generate igen input from | |
3024 | gencode file. | |
3025 | ||
3026 | * gencode.c (FEATURE_IGEN): Define. | |
3027 | (main): Add --igen option. Generate output in igen format. | |
3028 | (process_instructions): Format output according to igen option. | |
3029 | (print_igen_insn_format): New function. | |
3030 | (print_igen_insn_models): New function. | |
3031 | (process_instructions): Only issue warnings and ignore | |
3032 | instructions when no FEATURE_IGEN. | |
3033 | ||
3034 | Wed Sep 24 17:38:57 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
3035 | ||
3036 | * interp.c (COP_SD, COP_LD): Add UNUSED to pacify GCC for some | |
3037 | MIPS targets. | |
3038 | ||
3039 | Tue Sep 23 11:04:38 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
3040 | ||
3041 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
3042 | ||
3043 | Tue Sep 23 10:19:51 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
3044 | ||
3045 | * Makefile.in (SIM_ALIGNMENT, SIM_ENDIAN, SIM_HOSTENDIAN, | |
3046 | SIM_RESERVED_BITS): Delete, moved to common. | |
3047 | (SIM_EXTRA_CFLAGS): Update. | |
72f4393d | 3048 | |
c906108c SS |
3049 | Mon Sep 22 11:46:20 1997 Andrew Cagney <cagney@b1.cygnus.com> |
3050 | ||
3051 | * configure.in: Configure non-strict memory alignment. | |
3052 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
3053 | ||
3054 | Fri Sep 19 17:45:25 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
3055 | ||
3056 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
3057 | ||
3058 | Sat Sep 20 14:07:28 1997 Gavin Koch <gavin@cygnus.com> | |
3059 | ||
3060 | * gencode.c (SDBBP,DERET): Added (3900) insns. | |
3061 | (RFE): Turn on for 3900. | |
3062 | * interp.c (DebugBreakPoint,DEPC,Debug,Debug_*): Added. | |
3063 | (dsstate): Made global. | |
3064 | (SUBTARGET_R3900): Added. | |
3065 | (CANCELDELAYSLOT): New. | |
3066 | (SignalException): Ignore SystemCall rather than ignore and | |
3067 | terminate. Add DebugBreakPoint handling. | |
3068 | (decode_coproc): New insns RFE, DERET; and new registers Debug | |
3069 | and DEPC protected by SUBTARGET_R3900. | |
3070 | (sim_engine_run): Use CANCELDELAYSLOT rather than clearing | |
3071 | bits explicitly. | |
3072 | * Makefile.in,configure.in: Add mips subtarget option. | |
72f4393d | 3073 | * configure: Update. |
c906108c SS |
3074 | |
3075 | Fri Sep 19 09:33:27 1997 Gavin Koch <gavin@cygnus.com> | |
3076 | ||
3077 | * gencode.c: Add r3900 (tx39). | |
72f4393d | 3078 | |
c906108c SS |
3079 | |
3080 | Tue Sep 16 15:52:04 1997 Gavin Koch <gavin@cygnus.com> | |
3081 | ||
3082 | * gencode.c (build_instruction): Don't need to subtract 4 for | |
3083 | JALR, just 2. | |
3084 | ||
3085 | Tue Sep 16 11:32:28 1997 Gavin Koch <gavin@cygnus.com> | |
3086 | ||
3087 | * interp.c: Correct some HASFPU problems. | |
3088 | ||
3089 | Mon Sep 15 17:36:15 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
3090 | ||
3091 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
3092 | ||
3093 | Fri Sep 12 12:01:39 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
3094 | ||
3095 | * interp.c (mips_options): Fix samples option short form, should | |
3096 | be `x'. | |
3097 | ||
3098 | Thu Sep 11 09:35:29 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
3099 | ||
3100 | * interp.c (sim_info): Enable info code. Was just returning. | |
3101 | ||
3102 | Tue Sep 9 17:30:57 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
3103 | ||
3104 | * interp.c (decode_coproc): Clarify warning about unsuported MTC0, | |
3105 | MFC0. | |
3106 | ||
3107 | Tue Sep 9 16:28:28 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
3108 | ||
3109 | * gencode.c (build_instruction): Use SIGNED64 for 64 bit | |
3110 | constants. | |
3111 | (build_instruction): Ditto for LL. | |
3112 | ||
3113 | Thu Sep 4 17:21:23 1997 Doug Evans <dje@seba> | |
3114 | ||
3115 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
3116 | ||
3117 | Wed Aug 27 18:13:22 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
3118 | ||
3119 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
3120 | * config.in: Ditto. | |
3121 | ||
3122 | Wed Aug 27 14:12:27 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
3123 | ||
3124 | * interp.c (sim_open): Add call to sim_analyze_program, update | |
3125 | call to sim_config. | |
3126 | ||
3127 | Tue Aug 26 10:40:07 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
3128 | ||
3129 | * interp.c (sim_kill): Delete. | |
3130 | (sim_create_inferior): Add ABFD argument. Set PC from same. | |
3131 | (sim_load): Move code initializing trap handlers from here. | |
3132 | (sim_open): To here. | |
3133 | (sim_load): Delete, use sim-hload.c. | |
3134 | ||
3135 | * Makefile.in (SIM_OBJS): Add sim-hload.o module. | |
3136 | ||
3137 | Mon Aug 25 17:50:22 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
3138 | ||
3139 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
3140 | * config.in: Ditto. | |
3141 | ||
3142 | Mon Aug 25 15:59:48 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
3143 | ||
3144 | * interp.c (sim_open): Add ABFD argument. | |
3145 | (sim_load): Move call to sim_config from here. | |
3146 | (sim_open): To here. Check return status. | |
3147 | ||
3148 | Fri Jul 25 15:00:45 1997 Gavin Koch <gavin@cygnus.com> | |
72f4393d | 3149 | |
c906108c SS |
3150 | * gencode.c (build_instruction): Two arg MADD should |
3151 | not assign result to $0. | |
72f4393d | 3152 | |
c906108c SS |
3153 | Thu Jun 26 12:13:17 1997 Angela Marie Thomas (angela@cygnus.com) |
3154 | ||
3155 | * sim/mips/configure: Change default_sim_endian to 0 (bi-endian) | |
3156 | * sim/mips/configure.in: Regenerate. | |
3157 | ||
3158 | Wed Jul 9 10:29:21 1997 Andrew Cagney <cagney@critters.cygnus.com> | |
3159 | ||
3160 | * interp.c (SUB_REG_UW, SUB_REG_SW, SUB_REG_*): Use more explicit | |
3161 | signed8, unsigned8 et.al. types. | |
3162 | ||
3163 | * interp.c (SUB_REG_FETCH): Handle both little and big endian | |
3164 | hosts when selecting subreg. | |
3165 | ||
3166 | Wed Jul 2 11:54:10 1997 Jeffrey A Law (law@cygnus.com) | |
3167 | ||
3168 | * interp.c (sim_engine_run): Reset the ZERO register to zero | |
3169 | regardless of FEATURE_WARN_ZERO. | |
3170 | * gencode.c (FEATURE_WARNINGS): Remove FEATURE_WARN_ZERO. | |
3171 | ||
3172 | Wed Jun 4 10:43:14 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
3173 | ||
3174 | * interp.c (decode_coproc): Implement MTC0 N, CAUSE. | |
3175 | (SignalException): For BreakPoints ignore any mode bits and just | |
3176 | save the PC. | |
3177 | (SignalException): Always set the CAUSE register. | |
3178 | ||
3179 | Tue Jun 3 05:00:33 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
3180 | ||
3181 | * interp.c (SignalException): Clear the simDELAYSLOT flag when an | |
3182 | exception has been taken. | |
3183 | ||
3184 | * interp.c: Implement the ERET and mt/f sr instructions. | |
3185 | ||
3186 | Sat May 31 00:44:16 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
3187 | ||
3188 | * interp.c (SignalException): Don't bother restarting an | |
3189 | interrupt. | |
3190 | ||
3191 | Fri May 30 23:41:48 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
3192 | ||
3193 | * interp.c (SignalException): Really take an interrupt. | |
3194 | (interrupt_event): Only deliver interrupts when enabled. | |
3195 | ||
3196 | Tue May 27 20:08:06 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
3197 | ||
3198 | * interp.c (sim_info): Only print info when verbose. | |
3199 | (sim_info) Use sim_io_printf for output. | |
72f4393d | 3200 | |
c906108c SS |
3201 | Tue May 27 14:22:23 1997 Andrew Cagney <cagney@b1.cygnus.com> |
3202 | ||
3203 | * interp.c (CoProcPresent): Add UNUSED attribute - not used by all | |
3204 | mips architectures. | |
3205 | ||
3206 | Tue May 27 14:22:23 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
3207 | ||
3208 | * interp.c (sim_do_command): Check for common commands if a | |
3209 | simulator specific command fails. | |
3210 | ||
3211 | Thu May 22 09:32:03 1997 Gavin Koch <gavin@cygnus.com> | |
3212 | ||
3213 | * interp.c (sim_engine_run): ifdef out uses of simSTOP, simSTEP | |
3214 | and simBE when DEBUG is defined. | |
3215 | ||
3216 | Wed May 21 09:08:10 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
3217 | ||
3218 | * interp.c (interrupt_event): New function. Pass exception event | |
3219 | onto exception handler. | |
3220 | ||
3221 | * configure.in: Check for stdlib.h. | |
3222 | * configure: Regenerate. | |
3223 | ||
3224 | * gencode.c (build_instruction): Add UNUSED attribute to tempS | |
3225 | variable declaration. | |
3226 | (build_instruction): Initialize memval1. | |
3227 | (build_instruction): Add UNUSED attribute to byte, bigend, | |
3228 | reverse. | |
3229 | (build_operands): Ditto. | |
3230 | ||
3231 | * interp.c: Fix GCC warnings. | |
3232 | (sim_get_quit_code): Delete. | |
3233 | ||
3234 | * configure.in: Add INLINE, ENDIAN, HOSTENDIAN and WARNINGS. | |
3235 | * Makefile.in: Ditto. | |
3236 | * configure: Re-generate. | |
72f4393d | 3237 | |
c906108c SS |
3238 | * Makefile.in (SIM_OBJS): Add sim-watch.o module. |
3239 | ||
3240 | Tue May 20 15:08:56 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
3241 | ||
3242 | * interp.c (mips_option_handler): New function parse argumes using | |
3243 | sim-options. | |
3244 | (myname): Replace with STATE_MY_NAME. | |
3245 | (sim_open): Delete check for host endianness - performed by | |
3246 | sim_config. | |
3247 | (simHOSTBE, simBE): Delete, replaced by sim-endian flags. | |
3248 | (sim_open): Move much of the initialization from here. | |
3249 | (sim_load): To here. After the image has been loaded and | |
3250 | endianness set. | |
3251 | (sim_open): Move ColdReset from here. | |
3252 | (sim_create_inferior): To here. | |
3253 | (sim_open): Make FP check less dependant on host endianness. | |
3254 | ||
3255 | * Makefile.in (SIM_RUN_OBJS): Set to nrun.o - use new version or | |
3256 | run. | |
3257 | * interp.c (sim_set_callbacks): Delete. | |
3258 | ||
3259 | * interp.c (membank, membank_base, membank_size): Replace with | |
3260 | STATE_MEMORY, STATE_MEM_SIZE, STATE_MEM_BASE. | |
3261 | (sim_open): Remove call to callback->init. gdb/run do this. | |
3262 | ||
3263 | * interp.c: Update | |
3264 | ||
3265 | * sim-main.h (SIM_HAVE_FLATMEM): Define. | |
3266 | ||
3267 | * interp.c (big_endian_p): Delete, replaced by | |
3268 | current_target_byte_order. | |
3269 | ||
3270 | Tue May 20 13:55:00 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
3271 | ||
3272 | * interp.c (host_read_long, host_read_word, host_swap_word, | |
3273 | host_swap_long): Delete. Using common sim-endian. | |
3274 | (sim_fetch_register, sim_store_register): Use H2T. | |
3275 | (pipeline_ticks): Delete. Handled by sim-events. | |
3276 | (sim_info): Update. | |
3277 | (sim_engine_run): Update. | |
3278 | ||
3279 | Tue May 20 13:42:03 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
3280 | ||
3281 | * interp.c (sim_stop_reason): Move code determining simEXCEPTION | |
3282 | reason from here. | |
3283 | (SignalException): To here. Signal using sim_engine_halt. | |
3284 | (sim_stop_reason): Delete, moved to common. | |
72f4393d | 3285 | |
c906108c SS |
3286 | Tue May 20 10:19:48 1997 Andrew Cagney <cagney@b2.cygnus.com> |
3287 | ||
3288 | * interp.c (sim_open): Add callback argument. | |
3289 | (sim_set_callbacks): Delete SIM_DESC argument. | |
3290 | (sim_size): Ditto. | |
3291 | ||
3292 | Mon May 19 18:20:38 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
3293 | ||
3294 | * Makefile.in (SIM_OBJS): Add common modules. | |
3295 | ||
3296 | * interp.c (sim_set_callbacks): Also set SD callback. | |
3297 | (set_endianness, xfer_*, swap_*): Delete. | |
3298 | (host_read_word, host_read_long, host_swap_word, host_swap_long): | |
3299 | Change to functions using sim-endian macros. | |
3300 | (control_c, sim_stop): Delete, use common version. | |
3301 | (simulate): Convert into. | |
3302 | (sim_engine_run): This function. | |
3303 | (sim_resume): Delete. | |
72f4393d | 3304 | |
c906108c SS |
3305 | * interp.c (simulation): New variable - the simulator object. |
3306 | (sim_kind): Delete global - merged into simulation. | |
3307 | (sim_load): Cleanup. Move PC assignment from here. | |
3308 | (sim_create_inferior): To here. | |
3309 | ||
3310 | * sim-main.h: New file. | |
3311 | * interp.c (sim-main.h): Include. | |
72f4393d | 3312 | |
c906108c SS |
3313 | Thu Apr 24 00:39:51 1997 Doug Evans <dje@canuck.cygnus.com> |
3314 | ||
3315 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
3316 | ||
3317 | Wed Apr 23 17:32:19 1997 Doug Evans <dje@canuck.cygnus.com> | |
3318 | ||
3319 | * tconfig.in (SIM_HAVE_BIENDIAN): Define. | |
3320 | ||
3321 | Mon Apr 21 17:16:13 1997 Gavin Koch <gavin@cygnus.com> | |
3322 | ||
72f4393d L |
3323 | * gencode.c (build_instruction): DIV instructions: check |
3324 | for division by zero and integer overflow before using | |
c906108c SS |
3325 | host's division operation. |
3326 | ||
3327 | Thu Apr 17 03:18:14 1997 Doug Evans <dje@canuck.cygnus.com> | |
3328 | ||
3329 | * Makefile.in (SIM_OBJS): Add sim-load.o. | |
3330 | * interp.c: #include bfd.h. | |
3331 | (target_byte_order): Delete. | |
3332 | (sim_kind, myname, big_endian_p): New static locals. | |
3333 | (sim_open): Set sim_kind, myname. Move call to set_endianness to | |
3334 | after argument parsing. Recognize -E arg, set endianness accordingly. | |
3335 | (sim_load): Return SIM_RC. New arg abfd. Call sim_load_file to | |
3336 | load file into simulator. Set PC from bfd. | |
3337 | (sim_create_inferior): Return SIM_RC. Delete arg start_address. | |
3338 | (set_endianness): Use big_endian_p instead of target_byte_order. | |
3339 | ||
3340 | Wed Apr 16 17:55:37 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
3341 | ||
3342 | * interp.c (sim_size): Delete prototype - conflicts with | |
3343 | definition in remote-sim.h. Correct definition. | |
3344 | ||
3345 | Mon Apr 7 15:45:02 1997 Andrew Cagney <cagney@kremvax.cygnus.com> | |
3346 | ||
3347 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
3348 | * config.in: Ditto. | |
3349 | ||
3350 | Wed Apr 2 15:06:28 1997 Doug Evans <dje@canuck.cygnus.com> | |
3351 | ||
3352 | * interp.c (sim_open): New arg `kind'. | |
3353 | ||
3354 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
3355 | ||
3356 | Wed Apr 2 14:34:19 1997 Andrew Cagney <cagney@kremvax.cygnus.com> | |
3357 | ||
3358 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
3359 | ||
3360 | Tue Mar 25 11:38:22 1997 Doug Evans <dje@canuck.cygnus.com> | |
3361 | ||
3362 | * interp.c (sim_open): Set optind to 0 before calling getopt. | |
3363 | ||
3364 | Wed Mar 19 01:14:00 1997 Andrew Cagney <cagney@kremvax.cygnus.com> | |
3365 | ||
3366 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
3367 | ||
3368 | Mon Mar 17 10:52:59 1997 Gavin Koch <gavin@cetus.cygnus.com> | |
3369 | ||
3370 | * interp.c : Replace uses of pr_addr with pr_uword64 | |
3371 | where the bit length is always 64 independent of SIM_ADDR. | |
3372 | (pr_uword64) : added. | |
3373 | ||
3374 | Mon Mar 17 15:10:07 1997 Andrew Cagney <cagney@kremvax.cygnus.com> | |
3375 | ||
3376 | * configure: Re-generate. | |
3377 | ||
3378 | Fri Mar 14 10:34:11 1997 Michael Meissner <meissner@cygnus.com> | |
3379 | ||
3380 | * configure: Regenerate to track ../common/aclocal.m4 changes. | |
3381 | ||
3382 | Thu Mar 13 12:51:36 1997 Doug Evans <dje@canuck.cygnus.com> | |
3383 | ||
3384 | * interp.c (sim_open): New SIM_DESC result. Argument is now | |
3385 | in argv form. | |
3386 | (other sim_*): New SIM_DESC argument. | |
3387 | ||
3388 | Mon Feb 24 22:47:14 1997 Dawn Perchik <dawn@cygnus.com> | |
3389 | ||
3390 | * interp.c: Fix printing of addresses for non-64-bit targets. | |
3391 | (pr_addr): Add function to print address based on size. | |
3392 | ||
3393 | Wed Feb 19 14:42:09 1997 Mark Alexander <marka@cygnus.com> | |
3394 | ||
3395 | * interp.c (simopen): Add support for LSI MiniRISC PMON vectors. | |
3396 | ||
3397 | Thu Feb 13 14:08:30 1997 Ian Lance Taylor <ian@cygnus.com> | |
3398 | ||
3399 | * gencode.c (build_mips16_operands): Correct computation of base | |
3400 | address for extended PC relative instruction. | |
3401 | ||
3402 | Thu Feb 6 17:16:15 1997 Ian Lance Taylor <ian@cygnus.com> | |
3403 | ||
3404 | * interp.c (mips16_entry): Add support for floating point cases. | |
3405 | (SignalException): Pass floating point cases to mips16_entry. | |
3406 | (ValueFPR): Don't restrict fmt_single and fmt_word to even | |
3407 | registers. | |
3408 | (StoreFPR): Likewise. Also, don't clobber fpr + 1 for fmt_single | |
3409 | or fmt_word. | |
3410 | (COP_LW): Pass fmt_word rather than fmt_uninterpreted to StoreFPR, | |
3411 | and then set the state to fmt_uninterpreted. | |
3412 | (COP_SW): Temporarily set the state to fmt_word while calling | |
3413 | ValueFPR. | |
3414 | ||
3415 | Tue Feb 4 16:48:25 1997 Ian Lance Taylor <ian@cygnus.com> | |
3416 | ||
3417 | * gencode.c (build_instruction): The high order may be set in the | |
3418 | comparison flags at any ISA level, not just ISA 4. | |
3419 | ||
3420 | Tue Feb 4 13:33:30 1997 Doug Evans <dje@canuck.cygnus.com> | |
3421 | ||
3422 | * Makefile.in (@COMMON_MAKEFILE_FRAG): Use | |
3423 | COMMON_{PRE,POST}_CONFIG_FRAG instead. | |
3424 | * configure.in: sinclude ../common/aclocal.m4. | |
3425 | * configure: Regenerated. | |
3426 | ||
3427 | Fri Jan 31 11:11:45 1997 Ian Lance Taylor <ian@cygnus.com> | |
3428 | ||
3429 | * configure: Rebuild after change to aclocal.m4. | |
3430 | ||
3431 | Thu Jan 23 11:46:23 1997 Stu Grossman (grossman@critters.cygnus.com) | |
3432 | ||
3433 | * configure configure.in Makefile.in: Update to new configure | |
3434 | scheme which is more compatible with WinGDB builds. | |
3435 | * configure.in: Improve comment on how to run autoconf. | |
3436 | * configure: Re-run autoconf to get new ../common/aclocal.m4. | |
3437 | * Makefile.in: Use autoconf substitution to install common | |
3438 | makefile fragment. | |
3439 | ||
3440 | Wed Jan 8 12:39:03 1997 Jim Wilson <wilson@cygnus.com> | |
3441 | ||
3442 | * gencode.c (build_instruction): Use BigEndianCPU instead of | |
3443 | ByteSwapMem. | |
3444 | ||
3445 | Thu Jan 02 22:23:04 1997 Mark Alexander <marka@cygnus.com> | |
3446 | ||
3447 | * interp.c (sim_monitor): Make output to stdout visible in | |
3448 | wingdb's I/O log window. | |
3449 | ||
3450 | Tue Dec 31 07:04:00 1996 Mark Alexander <marka@cygnus.com> | |
3451 | ||
3452 | * support.h: Undo previous change to SIGTRAP | |
3453 | and SIGQUIT values. | |
3454 | ||
3455 | Mon Dec 30 17:36:06 1996 Ian Lance Taylor <ian@cygnus.com> | |
3456 | ||
3457 | * interp.c (store_word, load_word): New static functions. | |
3458 | (mips16_entry): New static function. | |
3459 | (SignalException): Look for mips16 entry and exit instructions. | |
3460 | (simulate): Use the correct index when setting fpr_state after | |
3461 | doing a pending move. | |
3462 | ||
3463 | Sun Dec 29 09:37:18 1996 Mark Alexander <marka@cygnus.com> | |
3464 | ||
3465 | * interp.c: Fix byte-swapping code throughout to work on | |
3466 | both little- and big-endian hosts. | |
3467 | ||
3468 | Sun Dec 29 09:18:32 1996 Mark Alexander <marka@cygnus.com> | |
3469 | ||
3470 | * support.h: Make definitions of SIGTRAP and SIGQUIT consistent | |
3471 | with gdb/config/i386/xm-windows.h. | |
3472 | ||
3473 | Fri Dec 27 22:48:51 1996 Mark Alexander <marka@cygnus.com> | |
3474 | ||
3475 | * gencode.c (build_instruction): Work around MSVC++ code gen bug | |
3476 | that messes up arithmetic shifts. | |
3477 | ||
3478 | Fri Dec 20 11:04:05 1996 Stu Grossman (grossman@critters.cygnus.com) | |
3479 | ||
3480 | * support.h: Use _WIN32 instead of __WIN32__. Also add defs for | |
3481 | SIGTRAP and SIGQUIT for _WIN32. | |
3482 | ||
3483 | Thu Dec 19 14:07:27 1996 Ian Lance Taylor <ian@cygnus.com> | |
3484 | ||
3485 | * gencode.c (build_instruction) [MUL]: Cast operands to word64, to | |
3486 | force a 64 bit multiplication. | |
3487 | (build_instruction) [OR]: In mips16 mode, don't do anything if the | |
3488 | destination register is 0, since that is the default mips16 nop | |
3489 | instruction. | |
3490 | ||
3491 | Mon Dec 16 14:59:38 1996 Ian Lance Taylor <ian@cygnus.com> | |
3492 | ||
3493 | * gencode.c (MIPS16_DECODE): SWRASP is I8, not RI. | |
3494 | (build_endian_shift): Don't check proc64. | |
3495 | (build_instruction): Always set memval to uword64. Cast op2 to | |
3496 | uword64 when shifting it left in memory instructions. Always use | |
3497 | the same code for stores--don't special case proc64. | |
3498 | ||
3499 | * gencode.c (build_mips16_operands): Fix base PC value for PC | |
3500 | relative operands. | |
3501 | (build_instruction): Call JALDELAYSLOT rather than DELAYSLOT for a | |
3502 | jal instruction. | |
3503 | * interp.c (simJALDELAYSLOT): Define. | |
3504 | (JALDELAYSLOT): Define. | |
3505 | (INDELAYSLOT, INJALDELAYSLOT): Define. | |
3506 | (simulate): Clear simJALDELAYSLOT when simDELAYSLOT is cleared. | |
3507 | ||
3508 | Tue Dec 24 22:11:20 1996 Angela Marie Thomas (angela@cygnus.com) | |
3509 | ||
3510 | * interp.c (sim_open): add flush_cache as a PMON routine | |
3511 | (sim_monitor): handle flush_cache by ignoring it | |
3512 | ||
3513 | Wed Dec 11 13:53:51 1996 Jim Wilson <wilson@cygnus.com> | |
3514 | ||
3515 | * gencode.c (build_instruction): Use !ByteSwapMem instead of | |
3516 | BigEndianMem. | |
3517 | * interp.c (CONFIG, config_EP_{mask,shift,D,DxxDxx, config_BE): Delete. | |
3518 | (BigEndianMem): Rename to ByteSwapMem and change sense. | |
3519 | (BigEndianCPU, sim_write, LoadMemory, StoreMemory): Change | |
3520 | BigEndianMem references to !ByteSwapMem. | |
3521 | (set_endianness): New function, with prototype. | |
3522 | (sim_open): Call set_endianness. | |
3523 | (sim_info): Use simBE instead of BigEndianMem. | |
3524 | (xfer_direct_word, xfer_direct_long, swap_direct_word, | |
3525 | swap_direct_long, xfer_big_word, xfer_big_long, xfer_little_word, | |
3526 | xfer_little_long, swap_word, swap_long): Delete unnecessary MSC_VER | |
3527 | ifdefs, keeping the prototype declaration. | |
3528 | (swap_word): Rewrite correctly. | |
3529 | (ColdReset): Delete references to CONFIG. Delete endianness related | |
3530 | code; moved to set_endianness. | |
72f4393d | 3531 | |
c906108c SS |
3532 | Tue Dec 10 11:32:04 1996 Jim Wilson <wilson@cygnus.com> |
3533 | ||
3534 | * gencode.c (build_instruction, case JUMP): Truncate PC to 32 bits. | |
3535 | * interp.c (CHECKHILO): Define away. | |
3536 | (simSIGINT): New macro. | |
3537 | (membank_size): Increase from 1MB to 2MB. | |
3538 | (control_c): New function. | |
3539 | (sim_resume): Rename parameter signal to signal_number. Add local | |
3540 | variable prev. Call signal before and after simulate. | |
3541 | (sim_stop_reason): Add simSIGINT support. | |
3542 | (sim_warning, sim_error, dotrace, SignalException): Define as stdarg | |
3543 | functions always. | |
3544 | (sim_warning): Delete call to SignalException. Do call printf_filtered | |
3545 | if logfh is NULL. | |
3546 | (AddressTranslation): Add #ifdef DEBUG around debugging message and | |
3547 | a call to sim_warning. | |
3548 | ||
3549 | Wed Nov 27 11:53:50 1996 Ian Lance Taylor <ian@cygnus.com> | |
3550 | ||
3551 | * gencode.c (process_instructions): If ! proc64, skip DOUBLEWORD | |
3552 | 16 bit instructions. | |
3553 | ||
3554 | Tue Nov 26 11:53:12 1996 Ian Lance Taylor <ian@cygnus.com> | |
3555 | ||
3556 | Add support for mips16 (16 bit MIPS implementation): | |
3557 | * gencode.c (inst_type): Add mips16 instruction encoding types. | |
3558 | (GETDATASIZEINSN): Define. | |
3559 | (MIPS_DECODE): Add REG flag to dsllv, dsrav, and dsrlv. Add | |
3560 | jalx. Add LEFT flag to mfhi and mflo. Add RIGHT flag to mthi and | |
3561 | mtlo. | |
3562 | (MIPS16_DECODE): New table, for mips16 instructions. | |
3563 | (bitmap_val): New static function. | |
3564 | (struct mips16_op): Define. | |
3565 | (mips16_op_table): New table, for mips16 operands. | |
3566 | (build_mips16_operands): New static function. | |
3567 | (process_instructions): If PC is odd, decode a mips16 | |
3568 | instruction. Break out instruction handling into new | |
3569 | build_instruction function. | |
3570 | (build_instruction): New static function, broken out of | |
3571 | process_instructions. Check modifiers rather than flags for SHIFT | |
3572 | bit count and m[ft]{hi,lo} direction. | |
3573 | (usage): Pass program name to fprintf. | |
3574 | (main): Remove unused variable this_option_optind. Change | |
3575 | ``*loptarg++'' to ``loptarg++''. | |
3576 | (my_strtoul): Parenthesize && within ||. | |
3577 | * interp.c (LoadMemory): Accept a halfword pAddr if vAddr is odd. | |
3578 | (simulate): If PC is odd, fetch a 16 bit instruction, and | |
3579 | increment PC by 2 rather than 4. | |
3580 | * configure.in: Add case for mips16*-*-*. | |
3581 | * configure: Rebuild. | |
3582 | ||
3583 | Fri Nov 22 08:49:36 1996 Mark Alexander <marka@cygnus.com> | |
3584 | ||
3585 | * interp.c: Allow -t to enable tracing in standalone simulator. | |
3586 | Fix garbage output in trace file and error messages. | |
3587 | ||
3588 | Wed Nov 20 01:54:37 1996 Doug Evans <dje@canuck.cygnus.com> | |
3589 | ||
3590 | * Makefile.in: Delete stuff moved to ../common/Make-common.in. | |
3591 | (SIM_{OBJS,EXTRA_CFLAGS,EXTRA_CLEAN}): Define. | |
3592 | * configure.in: Simplify using macros in ../common/aclocal.m4. | |
3593 | * configure: Regenerated. | |
3594 | * tconfig.in: New file. | |
3595 | ||
3596 | Tue Nov 12 13:34:00 1996 Dawn Perchik <dawn@cygnus.com> | |
3597 | ||
3598 | * interp.c: Fix bugs in 64-bit port. | |
3599 | Use ansi function declarations for msvc compiler. | |
3600 | Initialize and test file pointer in trace code. | |
3601 | Prevent duplicate definition of LAST_EMED_REGNUM. | |
3602 | ||
3603 | Tue Oct 15 11:07:06 1996 Mark Alexander <marka@cygnus.com> | |
3604 | ||
3605 | * interp.c (xfer_big_long): Prevent unwanted sign extension. | |
3606 | ||
3607 | Thu Sep 26 17:35:00 1996 James G. Smith <jsmith@cygnus.co.uk> | |
3608 | ||
3609 | * interp.c (SignalException): Check for explicit terminating | |
3610 | breakpoint value. | |
3611 | * gencode.c: Pass instruction value through SignalException() | |
3612 | calls for Trap, Breakpoint and Syscall. | |
3613 | ||
3614 | Thu Sep 26 11:35:17 1996 James G. Smith <jsmith@cygnus.co.uk> | |
3615 | ||
3616 | * interp.c (SquareRoot): Add HAVE_SQRT check to ensure sqrt() is | |
3617 | only used on those hosts that provide it. | |
3618 | * configure.in: Add sqrt() to list of functions to be checked for. | |
3619 | * config.in: Re-generated. | |
3620 | * configure: Re-generated. | |
3621 | ||
3622 | Fri Sep 20 15:47:12 1996 Ian Lance Taylor <ian@cygnus.com> | |
3623 | ||
3624 | * gencode.c (process_instructions): Call build_endian_shift when | |
3625 | expanding STORE RIGHT, to fix swr. | |
3626 | * support.h (SIGNEXTEND): If the sign bit is not set, explicitly | |
3627 | clear the high bits. | |
3628 | * interp.c (Convert): Fix fmt_single to fmt_long to not truncate. | |
3629 | Fix float to int conversions to produce signed values. | |
3630 | ||
3631 | Thu Sep 19 15:34:17 1996 Ian Lance Taylor <ian@cygnus.com> | |
3632 | ||
3633 | * gencode.c (MIPS_DECODE): Set UNSIGNED for multu instruction. | |
3634 | (process_instructions): Correct handling of nor instruction. | |
3635 | Correct shift count for 32 bit shift instructions. Correct sign | |
3636 | extension for arithmetic shifts to not shift the number of bits in | |
3637 | the type. Fix 64 bit multiply high word calculation. Fix 32 bit | |
3638 | unsigned multiply. Fix ldxc1 and friends to use coprocessor 1. | |
3639 | Fix madd. | |
3640 | * interp.c (CHECKHILO): Don't set HIACCESS, LOACCESS, or HLPC. | |
3641 | It's OK to have a mult follow a mult. What's not OK is to have a | |
3642 | mult follow an mfhi. | |
3643 | (Convert): Comment out incorrect rounding code. | |
3644 | ||
3645 | Mon Sep 16 11:38:16 1996 James G. Smith <jsmith@cygnus.co.uk> | |
3646 | ||
3647 | * interp.c (sim_monitor): Improved monitor printf | |
3648 | simulation. Tidied up simulator warnings, and added "--log" option | |
3649 | for directing warning message output. | |
3650 | * gencode.c: Use sim_warning() rather than WARNING macro. | |
3651 | ||
3652 | Thu Aug 22 15:03:12 1996 Ian Lance Taylor <ian@cygnus.com> | |
3653 | ||
3654 | * Makefile.in (gencode): Depend upon gencode.o, getopt.o, and | |
3655 | getopt1.o, rather than on gencode.c. Link objects together. | |
3656 | Don't link against -liberty. | |
3657 | (gencode.o, getopt.o, getopt1.o): New targets. | |
3658 | * gencode.c: Include <ctype.h> and "ansidecl.h". | |
3659 | (AND): Undefine after including "ansidecl.h". | |
3660 | (ULONG_MAX): Define if not defined. | |
3661 | (OP_*): Don't define macros; now defined in opcode/mips.h. | |
3662 | (main): Call my_strtoul rather than strtoul. | |
3663 | (my_strtoul): New static function. | |
3664 | ||
3665 | Wed Jul 17 18:12:38 1996 Stu Grossman (grossman@critters.cygnus.com) | |
3666 | ||
3667 | * gencode.c (process_instructions): Generate word64 and uword64 | |
3668 | instead of `long long' and `unsigned long long' data types. | |
3669 | * interp.c: #include sysdep.h to get signals, and define default | |
3670 | for SIGBUS. | |
3671 | * (Convert): Work around for Visual-C++ compiler bug with type | |
3672 | conversion. | |
3673 | * support.h: Make things compile under Visual-C++ by using | |
3674 | __int64 instead of `long long'. Change many refs to long long | |
3675 | into word64/uword64 typedefs. | |
3676 | ||
3677 | Wed Jun 26 12:24:55 1996 Jason Molenda (crash@godzilla.cygnus.co.jp) | |
3678 | ||
72f4393d L |
3679 | * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir, |
3680 | INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values. | |
3681 | (docdir): Removed. | |
3682 | * configure.in (AC_PREREQ): autoconf 2.5 or higher. | |
3683 | (AC_PROG_INSTALL): Added. | |
c906108c | 3684 | (AC_PROG_CC): Moved to before configure.host call. |
72f4393d L |
3685 | * configure: Rebuilt. |
3686 | ||
c906108c SS |
3687 | Wed Jun 5 08:28:13 1996 James G. Smith <jsmith@cygnus.co.uk> |
3688 | ||
3689 | * configure.in: Define @SIMCONF@ depending on mips target. | |
3690 | * configure: Rebuild. | |
3691 | * Makefile.in (run): Add @SIMCONF@ to control simulator | |
3692 | construction. | |
3693 | * gencode.c: Change LOADDRMASK to 64bit memory model only. | |
3694 | * interp.c: Remove some debugging, provide more detailed error | |
3695 | messages, update memory accesses to use LOADDRMASK. | |
72f4393d | 3696 | |
c906108c SS |
3697 | Mon Jun 3 11:55:03 1996 Ian Lance Taylor <ian@cygnus.com> |
3698 | ||
3699 | * configure.in: Add calls to AC_CONFIG_HEADER, AC_CHECK_HEADERS, | |
3700 | AC_CHECK_LIB, and AC_CHECK_FUNCS. Change AC_OUTPUT to set | |
3701 | stamp-h. | |
3702 | * configure: Rebuild. | |
3703 | * config.in: New file, generated by autoheader. | |
3704 | * interp.c: Include "config.h". Include <stdlib.h>, <string.h>, | |
3705 | and <strings.h> if they exist. Replace #ifdef sun with #ifdef | |
3706 | HAVE_ANINT and HAVE_AINT, as appropriate. | |
3707 | * Makefile.in (run): Use @LIBS@ rather than -lm. | |
3708 | (interp.o): Depend upon config.h. | |
3709 | (Makefile): Just rebuild Makefile. | |
3710 | (clean): Remove stamp-h. | |
3711 | (mostlyclean): Make the same as clean, not as distclean. | |
3712 | (config.h, stamp-h): New targets. | |
3713 | ||
3714 | Fri May 10 00:41:17 1996 James G. Smith <jsmith@cygnus.co.uk> | |
3715 | ||
3716 | * interp.c (ColdReset): Fix boolean test. Make all simulator | |
3717 | globals static. | |
3718 | ||
3719 | Wed May 8 15:12:58 1996 James G. Smith <jsmith@cygnus.co.uk> | |
3720 | ||
3721 | * interp.c (xfer_direct_word, xfer_direct_long, | |
3722 | swap_direct_word, swap_direct_long, xfer_big_word, | |
3723 | xfer_big_long, xfer_little_word, xfer_little_long, | |
3724 | swap_word,swap_long): Added. | |
3725 | * interp.c (ColdReset): Provide function indirection to | |
3726 | host<->simulated_target transfer routines. | |
3727 | * interp.c (sim_store_register, sim_fetch_register): Updated to | |
3728 | make use of indirected transfer routines. | |
3729 | ||
3730 | Fri Apr 19 15:48:24 1996 James G. Smith <jsmith@cygnus.co.uk> | |
3731 | ||
3732 | * gencode.c (process_instructions): Ensure FP ABS instruction | |
3733 | recognised. | |
3734 | * interp.c (AbsoluteValue): Add routine. Also provide simple PMON | |
3735 | system call support. | |
3736 | ||
3737 | Wed Apr 10 09:51:38 1996 James G. Smith <jsmith@cygnus.co.uk> | |
3738 | ||
3739 | * interp.c (sim_do_command): Complain if callback structure not | |
3740 | initialised. | |
3741 | ||
3742 | Thu Mar 28 13:50:51 1996 James G. Smith <jsmith@cygnus.co.uk> | |
3743 | ||
3744 | * interp.c (Convert): Provide round-to-nearest and round-to-zero | |
3745 | support for Sun hosts. | |
3746 | * Makefile.in (gencode): Ensure the host compiler and libraries | |
3747 | used for cross-hosted build. | |
3748 | ||
3749 | Wed Mar 27 14:42:12 1996 James G. Smith <jsmith@cygnus.co.uk> | |
3750 | ||
3751 | * interp.c, gencode.c: Some more (TODO) tidying. | |
3752 | ||
3753 | Thu Mar 7 11:19:33 1996 James G. Smith <jsmith@cygnus.co.uk> | |
3754 | ||
3755 | * gencode.c, interp.c: Replaced explicit long long references with | |
3756 | WORD64HI, WORD64LO, SET64HI and SET64LO macro calls. | |
3757 | * support.h (SET64LO, SET64HI): Macros added. | |
3758 | ||
3759 | Wed Feb 21 12:16:21 1996 Ian Lance Taylor <ian@cygnus.com> | |
3760 | ||
3761 | * configure: Regenerate with autoconf 2.7. | |
3762 | ||
3763 | Tue Jan 30 08:48:18 1996 Fred Fish <fnf@cygnus.com> | |
3764 | ||
3765 | * interp.c (LoadMemory): Enclose text following #endif in /* */. | |
3766 | * support.h: Remove superfluous "1" from #if. | |
3767 | * support.h (CHECKSIM): Remove stray 'a' at end of line. | |
3768 | ||
3769 | Mon Dec 4 11:44:40 1995 Jamie Smith <jsmith@cygnus.com> | |
3770 | ||
3771 | * interp.c (StoreFPR): Control UndefinedResult() call on | |
3772 | WARN_RESULT manifest. | |
3773 | ||
3774 | Fri Dec 1 16:37:19 1995 James G. Smith <jsmith@cygnus.co.uk> | |
3775 | ||
3776 | * gencode.c: Tidied instruction decoding, and added FP instruction | |
3777 | support. | |
3778 | ||
3779 | * interp.c: Added dineroIII, and BSD profiling support. Also | |
3780 | run-time FP handling. | |
3781 | ||
3782 | Sun Oct 22 00:57:18 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk> | |
3783 | ||
3784 | * Changelog, Makefile.in, README.Cygnus, configure, configure.in, | |
3785 | gencode.c, interp.c, support.h: created. |