Commit | Line | Data |
---|---|---|
ca971540 CD |
1 | 2002-02-27 Chris Demetriou <cgd@broadcom.com> |
2 | ||
3 | * mips.igen (check_u64): New function which in the future will | |
4 | check whether 64-bit instructions are usable and signal an | |
5 | exception if not. Currently a no-op. | |
6 | (DADD, DADDI, DADDIU, DADDU, DDIV, DDIVU, DMULT, DMULTU, DSLL, | |
7 | DSLL32, DSLLV, DSRA, DSRA32, DSRAV, DSRL, DSRL32, DSRLV, DSUB, | |
8 | DSUBU, LD, LDL, LDR, LLD, LWU, SCD, SD, SDL, SDR, DMxC1, LDXC1, | |
9 | LWXC1, SDXC1, SWXC1, DMFC0, DMTC0): Use check_u64. | |
10 | ||
11 | * mips.igen (check_fpu): New function which in the future will | |
12 | check whether FPU instructions are usable and signal an exception | |
13 | if not. Currently a no-op. | |
14 | (ABS.fmt, ADD.fmt, BC1a, BC1b, C.cond.fmta, C.cond.fmtb, | |
15 | CEIL.L.fmt, CEIL.W, CxC1, CVT.D.fmt, CVT.L.fmt, CVT.S.fmt, | |
16 | CVT.W.fmt, DIV.fmt, DMxC1, DMxC1, FLOOR.L.fmt, FLOOR.W.fmt, LDC1, | |
17 | LDXC1, LWC1, LWXC1, MADD.D, MADD.S, MxC1, MOV.fmt, MOVtf, | |
18 | MOVtf.fmt, MOVN.fmt, MOVZ.fmt, MSUB.D, MSUB.S, MUL.fmt, NEG.fmt, | |
19 | NMADD.D, NMADD.S, NMSUB.D, NMSUB.S, RECIP.fmt, ROUND.L.fmt, | |
20 | ROUND.W.fmt, RSQRT.fmt, SDC1, SDXC1, SQRT.fmt, SUB.fmt, SWC1, | |
21 | SWXC1, TRUNC.L.fmt, TRUNC.W): Use check_fpu. | |
22 | ||
1c47a468 CD |
23 | 2002-02-27 Chris Demetriou <cgd@broadcom.com> |
24 | ||
25 | * mips.igen (do_load_left, do_load_right): Move to be immediately | |
26 | following do_load. | |
27 | (do_store_left, do_store_right): Move to be immediately following | |
28 | do_store. | |
29 | ||
603a98e7 CD |
30 | 2002-02-27 Chris Demetriou <cgd@broadcom.com> |
31 | ||
32 | * mips.igen (mipsV): New model name. Also, add it to | |
33 | all instructions and functions where it is appropriate. | |
34 | ||
c5d00cc7 CD |
35 | 2002-02-18 Chris Demetriou <cgd@broadcom.com> |
36 | ||
37 | * mips.igen: For all functions and instructions, list model | |
38 | names that support that instruction one per line. | |
39 | ||
074e9cb8 CD |
40 | 2002-02-11 Chris Demetriou <cgd@broadcom.com> |
41 | ||
42 | * mips.igen: Add some additional comments about supported | |
43 | models, and about which instructions go where. | |
44 | (BC1b, MFC0, MTC0, RFE): Sort supported models in the same | |
45 | order as is used in the rest of the file. | |
46 | ||
9805e229 CD |
47 | 2002-02-11 Chris Demetriou <cgd@broadcom.com> |
48 | ||
49 | * mips.igen (ADD, ADDI, DADDI, DSUB, SUB): Add comment | |
50 | indicating that ALU32_END or ALU64_END are there to check | |
51 | for overflow. | |
52 | (DADD): Likewise, but also remove previous comment about | |
53 | overflow checking. | |
54 | ||
f701dad2 CD |
55 | 2002-02-10 Chris Demetriou <cgd@broadcom.com> |
56 | ||
57 | * mips.igen (DDIV, DIV, DIVU, DMULT, DMULTU, DSLL, DSLL32, | |
58 | DSLLV, DSRA, DSRA32, DSRAV, DSRL, DSRL32, DSRLV, DSUB, DSUBU, | |
59 | JALR, JR, MOVN, MOVZ, MTLO, MULT, MULTU, SLL, SLLV, SLT, SLTU, | |
60 | SRAV, SRLV, SUB, SUBU, SYNC, XOR, MOVtf, DI, DMFC0, DMTC0, EI, | |
61 | ERET, RFE, TLBP, TLBR, TLBWI, TLBWR): Tweak instruction opcode | |
62 | fields (i.e., add and move commas) so that they more closely | |
63 | match the MIPS ISA documentation opcode partitioning. | |
64 | ||
65 | 2002-02-10 Chris Demetriou <cgd@broadcom.com> | |
20ae0098 CD |
66 | |
67 | * mips.igen (ADDI): Print immediate value. | |
68 | (BREAK): Print code. | |
69 | (DADDIU, DSRAV, DSRLV): Print correct instruction name. | |
70 | (SLL): Print "nop" specially, and don't run the code | |
71 | that does the shift for the "nop" case. | |
72 | ||
9e52972e FF |
73 | 2001-11-17 Fred Fish <fnf@redhat.com> |
74 | ||
75 | * sim-main.h (float_operation): Move enum declaration outside | |
76 | of _sim_cpu struct declaration. | |
77 | ||
c0efbca4 JB |
78 | 2001-04-12 Jim Blandy <jimb@redhat.com> |
79 | ||
80 | * mips.igen (CFC1, CTC1): Pass the correct register numbers to | |
81 | PENDING_FILL. Use PENDING_SCHED directly to handle the pending | |
82 | set of the FCSR. | |
83 | * sim-main.h (COCIDX): Remove definition; this isn't supported by | |
84 | PENDING_FILL, and you can get the intended effect gracefully by | |
85 | calling PENDING_SCHED directly. | |
86 | ||
fb891446 BE |
87 | 2001-02-23 Ben Elliston <bje@redhat.com> |
88 | ||
89 | * sim-main.h (ENGINE_ISSUE_PREFIX_HOOK): Only define if not | |
90 | already defined elsewhere. | |
91 | ||
8030f857 BE |
92 | 2001-02-19 Ben Elliston <bje@redhat.com> |
93 | ||
94 | * sim-main.h (sim_monitor): Return an int. | |
95 | * interp.c (sim_monitor): Add return values. | |
96 | (signal_exception): Handle error conditions from sim_monitor. | |
97 | ||
56b48a7a CD |
98 | 2001-02-08 Ben Elliston <bje@redhat.com> |
99 | ||
100 | * sim-main.c (load_memory): Pass cia to sim_core_read* functions. | |
101 | (store_memory): Likewise, pass cia to sim_core_write*. | |
102 | ||
d3ee60d9 FCE |
103 | 2000-10-19 Frank Ch. Eigler <fche@redhat.com> |
104 | ||
105 | On advice from Chris G. Demetriou <cgd@sibyte.com>: | |
106 | * sim-main.h (GPR_CLEAR): Remove unused alternative macro. | |
107 | ||
071da002 AC |
108 | Thu Jul 27 22:02:05 2000 Andrew Cagney <cagney@b1.cygnus.com> |
109 | ||
110 | From Maciej W. Rozycki <macro@ds2.pg.gda.pl>: | |
111 | * Makefile.in: Don't delete *.igen when cleaning directory. | |
112 | ||
a28c02cd AC |
113 | Wed Jul 19 18:50:51 2000 Andrew Cagney <cagney@b1.cygnus.com> |
114 | ||
115 | * m16.igen (break): Call SignalException not sim_engine_halt. | |
116 | ||
80ee11fa AC |
117 | Mon Jul 3 11:13:20 2000 Andrew Cagney <cagney@b1.cygnus.com> |
118 | ||
119 | From Jason Eckhardt: | |
120 | * mips.igen (MOVZ.fmt, MOVN.fmt): Move conditional on GPR[RT]. | |
121 | ||
673388c0 AC |
122 | Tue Jun 13 20:52:07 2000 Andrew Cagney <cagney@b1.cygnus.com> |
123 | ||
124 | * mips.igen (MxC1, DMxC1): Fix printf formatting. | |
125 | ||
4c0deff4 NC |
126 | 2000-05-24 Michael Hayes <mhayes@cygnus.com> |
127 | ||
128 | * mips.igen (do_dmultx): Fix typo. | |
129 | ||
eb2d80b4 AC |
130 | Tue May 23 21:39:23 2000 Andrew Cagney <cagney@b1.cygnus.com> |
131 | ||
132 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
133 | ||
dd37a34b AC |
134 | Fri Apr 28 20:48:36 2000 Andrew Cagney <cagney@b1.cygnus.com> |
135 | ||
136 | * mips.igen (DMxC1): Fix format arguments for sim_io_eprintf call. | |
137 | ||
4c0deff4 NC |
138 | 2000-04-12 Frank Ch. Eigler <fche@redhat.com> |
139 | ||
140 | * sim-main.h (GPR_CLEAR): Define macro. | |
141 | ||
e30db738 AC |
142 | Mon Apr 10 00:07:09 2000 Andrew Cagney <cagney@b1.cygnus.com> |
143 | ||
144 | * interp.c (decode_coproc): Output long using %lx and not %s. | |
145 | ||
cb7450ea FCE |
146 | 2000-03-21 Frank Ch. Eigler <fche@redhat.com> |
147 | ||
148 | * interp.c (sim_open): Sort & extend dummy memory regions for | |
149 | --board=jmr3904 for eCos. | |
150 | ||
a3027dd7 FCE |
151 | 2000-03-02 Frank Ch. Eigler <fche@redhat.com> |
152 | ||
153 | * configure: Regenerated. | |
154 | ||
155 | Tue Feb 8 18:35:01 2000 Donald Lindsay <dlindsay@hound.cygnus.com> | |
156 | ||
157 | * interp.c, mips.igen: all 5 DEADC0DE situations now have sim_io_eprintf | |
158 | calls, conditional on the simulator being in verbose mode. | |
159 | ||
dfcd3bfb JM |
160 | Fri Feb 4 09:45:15 2000 Donald Lindsay <dlindsay@cygnus.com> |
161 | ||
162 | * sim-main.c (cache_op): Added case arm so that CACHE ops to a secondary | |
163 | cache don't get ReservedInstruction traps. | |
164 | ||
c2d11a7d JM |
165 | 1999-11-29 Mark Salter <msalter@cygnus.com> |
166 | ||
167 | * dv-tx3904sio.c (tx3904sio_io_write_buffer): Use write value as a mask | |
168 | to clear status bits in sdisr register. This is how the hardware works. | |
169 | ||
170 | * interp.c (sim_open): Added more memory aliases for jmr3904 hardware | |
171 | being used by cygmon. | |
172 | ||
4ce44c66 JM |
173 | 1999-11-11 Andrew Haley <aph@cygnus.com> |
174 | ||
175 | * interp.c (decode_coproc): Correctly handle DMFC0 and DMTC0 | |
176 | instructions. | |
177 | ||
cff3e48b JM |
178 | Thu Sep 9 15:12:08 1999 Geoffrey Keating <geoffk@cygnus.com> |
179 | ||
180 | * mips.igen (MULT): Correct previous mis-applied patch. | |
181 | ||
d4f3574e SS |
182 | Tue Sep 7 13:34:54 1999 Geoffrey Keating <geoffk@cygnus.com> |
183 | ||
184 | * mips.igen (delayslot32): Handle sequence like | |
185 | mtc1 $at,$f12 ; jal fp_add ; mov.s $f13,$f12 | |
186 | correctly by calling ENGINE_ISSUE_PREFIX_HOOK() before issue. | |
187 | (MULT): Actually pass the third register... | |
188 | ||
189 | 1999-09-03 Mark Salter <msalter@cygnus.com> | |
190 | ||
191 | * interp.c (sim_open): Added more memory aliases for additional | |
192 | hardware being touched by cygmon on jmr3904 board. | |
193 | ||
194 | Thu Sep 2 18:15:53 1999 Andrew Cagney <cagney@b1.cygnus.com> | |
195 | ||
196 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
197 | ||
a0b3c4fd JM |
198 | Tue Jul 27 16:36:51 1999 Andrew Cagney <cagney@amy.cygnus.com> |
199 | ||
200 | * interp.c (sim_store_register): Handle case where client - GDB - | |
201 | specifies that a 4 byte register is 8 bytes in size. | |
202 | (sim_fetch_register): Ditto. | |
203 | ||
adf40b2e JM |
204 | 1999-07-14 Frank Ch. Eigler <fche@cygnus.com> |
205 | ||
206 | Implement "sim firmware" option, inspired by jimb's version of 1998-01. | |
207 | * interp.c (firmware_option_p): New global flag: "sim firmware" given. | |
208 | (idt_monitor_base): Base address for IDT monitor traps. | |
209 | (pmon_monitor_base): Ditto for PMON. | |
210 | (lsipmon_monitor_base): Ditto for LSI PMON. | |
211 | (MONITOR_BASE, MONITOR_SIZE): Removed macros. | |
212 | (mips_option): Add "firmware" option with new OPTION_FIRMWARE key. | |
213 | (sim_firmware_command): New function. | |
214 | (mips_option_handler): Call it for OPTION_FIRMWARE. | |
215 | (sim_open): Allocate memory for idt_monitor region. If "--board" | |
216 | option was given, add no monitor by default. Add BREAK hooks only if | |
217 | monitors are also there. | |
218 | ||
43e526b9 JM |
219 | Mon Jul 12 00:02:27 1999 Andrew Cagney <cagney@amy.cygnus.com> |
220 | ||
221 | * interp.c (sim_monitor): Flush output before reading input. | |
222 | ||
223 | Sun Jul 11 19:28:11 1999 Andrew Cagney <cagney@b1.cygnus.com> | |
224 | ||
225 | * tconfig.in (SIM_HANDLES_LMA): Always define. | |
226 | ||
227 | Thu Jul 8 16:06:59 1999 Andrew Cagney <cagney@b1.cygnus.com> | |
228 | ||
229 | From Mark Salter <msalter@cygnus.com>: | |
230 | * interp.c (BOARD_BSP): Define. Add to list of possible boards. | |
231 | (sim_open): Add setup for BSP board. | |
232 | ||
9846de1b JM |
233 | Wed Jul 7 12:45:58 1999 Andrew Cagney <cagney@b1.cygnus.com> |
234 | ||
235 | * mips.igen (MULT, MULTU): Add syntax for two operand version. | |
236 | (DMFC0, DMTC0): Recognize. Call DecodeCoproc which will report | |
237 | them as unimplemented. | |
238 | ||
cd0fc7c3 SS |
239 | 1999-05-08 Felix Lee <flee@cygnus.com> |
240 | ||
241 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
242 | ||
7a292a7a SS |
243 | 1999-04-21 Frank Ch. Eigler <fche@cygnus.com> |
244 | ||
245 | * mips.igen (bc0f): For the TX39 only, decode this as a no-op stub. | |
246 | ||
247 | Thu Apr 15 14:15:17 1999 Andrew Cagney <cagney@amy.cygnus.com> | |
248 | ||
249 | * configure.in: Any mips64vr5*-*-* target should have | |
250 | -DTARGET_ENABLE_FR=1. | |
251 | (default_endian): Any mips64vr*el-*-* target should default to | |
252 | LITTLE_ENDIAN. | |
253 | * configure: Re-generate. | |
254 | ||
255 | 1999-02-19 Gavin Romig-Koch <gavin@cygnus.com> | |
256 | ||
257 | * mips.igen (ldl): Extend from _16_, not 32. | |
258 | ||
259 | Wed Jan 27 18:51:38 1999 Andrew Cagney <cagney@chook.cygnus.com> | |
260 | ||
261 | * interp.c (sim_store_register): Force registers written to by GDB | |
262 | into an un-interpreted state. | |
263 | ||
c906108c SS |
264 | 1999-02-05 Frank Ch. Eigler <fche@cygnus.com> |
265 | ||
266 | * dv-tx3904sio.c (tx3904sio_tickle): After a polled I/O from the | |
267 | CPU, start periodic background I/O polls. | |
268 | (tx3904sio_poll): New function: periodic I/O poller. | |
269 | ||
270 | 1998-12-30 Frank Ch. Eigler <fche@cygnus.com> | |
271 | ||
272 | * mips.igen (BREAK): Call signal_exception instead of sim_engine_halt. | |
273 | ||
274 | Tue Dec 29 16:03:53 1998 Rainer Orth <ro@TechFak.Uni-Bielefeld.DE> | |
275 | ||
276 | * configure.in, configure (mips64vr5*-*-*): Added missing ;; in | |
277 | case statement. | |
278 | ||
279 | 1998-12-29 Frank Ch. Eigler <fche@cygnus.com> | |
280 | ||
281 | * interp.c (sim_open): Allocate jm3904 memory in smaller chunks. | |
282 | (load_word): Call SIM_CORE_SIGNAL hook on error. | |
283 | (signal_exception): Call SIM_CPU_EXCEPTION_TRIGGER hook before | |
284 | starting. For exception dispatching, pass PC instead of NULL_CIA. | |
285 | (decode_coproc): Use COP0_BADVADDR to store faulting address. | |
286 | * sim-main.h (COP0_BADVADDR): Define. | |
287 | (SIM_CORE_SIGNAL): Define hook to call mips_core_signal. | |
288 | (SIM_CPU_EXCEPTION*): Define hooks to call mips_cpu_exception*(). | |
289 | (_sim_cpu): Add exc_* fields to store register value snapshots. | |
290 | * mips.igen (*): Replace memory-related SignalException* calls | |
291 | with references to SIM_CORE_SIGNAL hook. | |
292 | ||
293 | * dv-tx3904irc.c (tx3904irc_port_event): printf format warning | |
294 | fix. | |
295 | * sim-main.c (*): Minor warning cleanups. | |
296 | ||
297 | 1998-12-24 Gavin Romig-Koch <gavin@cygnus.com> | |
298 | ||
299 | * m16.igen (DADDIU5): Correct type-o. | |
300 | ||
301 | Mon Dec 21 10:34:48 1998 Andrew Cagney <cagney@chook> | |
302 | ||
303 | * mips.igen (do_ddiv, do_ddivu): Pacify GCC. Update hi/lo via tmp | |
304 | variables. | |
305 | ||
306 | Wed Dec 16 18:20:28 1998 Andrew Cagney <cagney@chook> | |
307 | ||
308 | * Makefile.in (SIM_EXTRA_CFLAGS): No longer need to add .../newlib | |
309 | to include path. | |
310 | (interp.o): Add dependency on itable.h | |
311 | (oengine.c, gencode): Delete remaining references. | |
312 | (BUILT_SRC_FROM_GEN): Clean up. | |
313 | ||
314 | 1998-12-16 Gavin Romig-Koch <gavin@cygnus.com> | |
315 | ||
316 | * vr4run.c: New. | |
317 | * Makefile.in (SIM_HACK_OBJ,HACK_OBJS,HACK_GEN_SRCS,libhack.a, | |
318 | tmp-hack,tmp-m32-hack,tmp-m16-hack,tmp-itable-hack, | |
319 | tmp-run-hack) : New. | |
320 | * m16.igen (LD,DADDIU,DADDUI5,DADJSP,DADDIUSP,DADDI,DADDU,DSUBU, | |
321 | DSLL,DSRL,DSRA,DSLLV,DSRAV,DMULT,DMULTU,DDIV,DDIVU,JALX32,JALX): | |
322 | Drop the "64" qualifier to get the HACK generator working. | |
323 | Use IMMEDIATE rather than IMMED. Use SHAMT rather than SHIFT. | |
324 | * mips.igen (do_daddiu,do_ddiv,do_divu): Remove the 64-only | |
325 | qualifier to get the hack generator working. | |
326 | (do_dsll,do_dsllv,do_dsra,do_dsrl,do_dsrlv): New. | |
327 | (DSLL): Use do_dsll. | |
328 | (DSLLV): Use do_dsllv. | |
329 | (DSRA): Use do_dsra. | |
330 | (DSRL): Use do_dsrl. | |
331 | (DSRLV): Use do_dsrlv. | |
332 | (BC1): Move *vr4100 to get the HACK generator working. | |
333 | (CxC1, DMxC1, MxC1,MACCU,MACCHI,MACCHIU): Rename to | |
334 | get the HACK generator working. | |
335 | (MACC) Rename to get the HACK generator working. | |
336 | (DMACC,MACCS,DMACCS): Add the 64. | |
337 | ||
338 | 1998-12-12 Gavin Romig-Koch <gavin@cygnus.com> | |
339 | ||
340 | * mips.igen (BC1): Renamed to BC1a and BC1b to avoid conflicts. | |
341 | * sim-main.h (SizeFGR): Handle TARGET_ENABLE_FR. | |
342 | ||
343 | 1998-12-11 Gavin Romig-Koch <gavin@cygnus.com> | |
344 | ||
345 | * mips/interp.c (DEBUG): Cleanups. | |
346 | ||
347 | 1998-12-10 Frank Ch. Eigler <fche@cygnus.com> | |
348 | ||
349 | * dv-tx3904sio.c (tx3904sio_io_read_buffer): Endianness fixes. | |
350 | (tx3904sio_tickle): fflush after a stdout character output. | |
351 | ||
352 | 1998-12-03 Frank Ch. Eigler <fche@cygnus.com> | |
353 | ||
354 | * interp.c (sim_close): Uninstall modules. | |
355 | ||
356 | Wed Nov 25 13:41:03 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
357 | ||
358 | * sim-main.h, interp.c (sim_monitor): Change to global | |
359 | function. | |
360 | ||
361 | Wed Nov 25 17:33:24 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
362 | ||
363 | * configure.in (vr4100): Only include vr4100 instructions in | |
364 | simulator. | |
365 | * configure: Re-generate. | |
366 | * m16.igen (*): Tag all mips16 instructions as also being vr4100. | |
367 | ||
368 | Mon Nov 23 18:20:36 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
369 | ||
370 | * Makefile.in (SIM_CFLAGS): Do not define WITH_IGEN. | |
371 | * sim-main.h, sim-main.c, interp.c: Delete #if WITH_IGEN keeping | |
372 | true alternative. | |
373 | ||
374 | * configure.in (sim_default_gen, sim_use_gen): Replace with | |
375 | sim_gen. | |
376 | (--enable-sim-igen): Delete config option. Always using IGEN. | |
377 | * configure: Re-generate. | |
378 | ||
379 | * Makefile.in (gencode): Kill, kill, kill. | |
380 | * gencode.c: Ditto. | |
381 | ||
382 | Mon Nov 23 18:07:36 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
383 | ||
384 | * configure.in: Configure mips64vr4100-elf nee mips64vr41* as a 64 | |
385 | bit mips16 igen simulator. | |
386 | * configure: Re-generate. | |
387 | ||
388 | * mips.igen (check_div_hilo, check_mult_hilo, check_mf_hilo): Mark | |
389 | as part of vr4100 ISA. | |
390 | * vr.igen: Mark all instructions as 64 bit only. | |
391 | ||
392 | Mon Nov 23 17:07:37 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
393 | ||
394 | * interp.c (get_cell, sim_monitor, fetch_str, CoProcPresent): | |
395 | Pacify GCC. | |
396 | ||
397 | Mon Nov 23 13:23:40 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
398 | ||
399 | * configure.in: Configure mips-lsi-elf nee mips*lsi* as a | |
400 | mipsIII/mips16 igen simulator. Fix sim_gen VS sim_igen typos. | |
401 | * configure: Re-generate. | |
402 | ||
403 | * m16.igen (BREAK): Define breakpoint instruction. | |
404 | (JALX32): Mark instruction as mips16 and not r3900. | |
405 | * mips.igen (C.cond.fmt): Fix typo in instruction format. | |
406 | ||
407 | * sim-main.h (PENDING_FILL): Wrap C statements in do/while. | |
408 | ||
409 | Sat Nov 7 09:54:38 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
410 | ||
411 | * gencode.c (build_instruction - BREAK): For MIPS16, handle BREAK | |
412 | insn as a debug breakpoint. | |
413 | ||
414 | * sim-main.h (PENDING_SLOT_BIT): Fix, was incorrectly defined as | |
415 | pending.slot_size. | |
416 | (PENDING_SCHED): Clean up trace statement. | |
417 | (PENDING_SCHED): Increment PENDING_IN and PENDING_TOTAL. | |
418 | (PENDING_FILL): Delay write by only one cycle. | |
419 | (PENDING_FILL): For FSRs, write fmt_uninterpreted to FPR_STATE. | |
420 | ||
421 | * sim-main.c (pending_tick): Clean up trace statements. Add trace | |
422 | of pending writes. | |
423 | (pending_tick): Fix sizes in switch statements, 4 & 8 instead of | |
424 | 32 & 64. | |
425 | (pending_tick): Move incrementing of index to FOR statement. | |
426 | (pending_tick): Only update PENDING_OUT after a write has occured. | |
427 | ||
428 | * configure.in: Add explicit mips-lsi-* target. Use gencode to | |
429 | build simulator. | |
430 | * configure: Re-generate. | |
431 | ||
432 | * interp.c (sim_engine_run OLD): Delete explicit call to | |
433 | PENDING_TICK. Now called via ENGINE_ISSUE_PREFIX_HOOK. | |
434 | ||
435 | Sat Oct 30 09:49:10 1998 Frank Ch. Eigler <fche@cygnus.com> | |
436 | ||
437 | * dv-tx3904cpu.c (deliver_tx3904cpu_interrupt): Add dummy | |
438 | interrupt level number to match changed SignalExceptionInterrupt | |
439 | macro. | |
440 | ||
441 | Fri Oct 9 18:02:25 1998 Doug Evans <devans@canuck.cygnus.com> | |
442 | ||
443 | * interp.c: #include "itable.h" if WITH_IGEN. | |
444 | (get_insn_name): New function. | |
445 | (sim_open): Initialize CPU_INSN_NAME,CPU_MAX_INSNS. | |
446 | * sim-main.h (MAX_INSNS,INSN_NAME): Delete. | |
447 | ||
448 | Mon Sep 14 12:36:44 1998 Frank Ch. Eigler <fche@cygnus.com> | |
449 | ||
450 | * configure: Rebuilt to inhale new common/aclocal.m4. | |
451 | ||
452 | Tue Sep 1 15:39:18 1998 Frank Ch. Eigler <fche@cygnus.com> | |
453 | ||
454 | * dv-tx3904sio.c: Include sim-assert.h. | |
455 | ||
456 | Tue Aug 25 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com> | |
457 | ||
458 | * dv-tx3904sio.c: New file: tx3904 serial I/O module. | |
459 | * configure.in: Add dv-tx3904sio, dv-sockser for tx39 target. | |
460 | Reorganize target-specific sim-hardware checks. | |
461 | * configure: rebuilt. | |
462 | * interp.c (sim_open): For tx39 target boards, set | |
463 | OPERATING_ENVIRONMENT, add tx3904sio devices. | |
464 | * tconfig.in: For tx39 target, set SIM_HANDLES_LMA for loading | |
465 | ROM executables. Install dv-sockser into sim-modules list. | |
466 | ||
467 | * dv-tx3904irc.c: Compiler warning clean-up. | |
468 | * dv-tx3904tmr.c: Compiler warning clean-up. Remove particularly | |
469 | frequent hw-trace messages. | |
470 | ||
471 | Fri Jul 31 18:14:16 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
472 | ||
473 | * vr.igen (MulAcc): Identify as a vr4100 specific function. | |
474 | ||
475 | Sat Jul 25 16:03:14 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
476 | ||
477 | * Makefile.in (IGEN_INCLUDE): Add vr.igen. | |
478 | ||
479 | * vr.igen: New file. | |
480 | (MAC/MADD16, DMAC/DMADD16): Implement using code from gencode.c. | |
481 | * mips.igen: Define vr4100 model. Include vr.igen. | |
482 | Mon Jun 29 09:21:07 1998 Gavin Koch <gavin@cygnus.com> | |
483 | ||
484 | * mips.igen (check_mf_hilo): Correct check. | |
485 | ||
486 | Wed Jun 17 12:20:49 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
487 | ||
488 | * sim-main.h (interrupt_event): Add prototype. | |
489 | ||
490 | * dv-tx3904tmr.c (tx3904tmr_io_write_buffer): Delete unused | |
491 | register_ptr, register_value. | |
492 | (deliver_tx3904tmr_tick): Fix types passed to printf fmt. | |
493 | ||
494 | * sim-main.h (tracefh): Make extern. | |
495 | ||
496 | Tue Jun 16 14:39:00 1998 Frank Ch. Eigler <fche@cygnus.com> | |
497 | ||
498 | * dv-tx3904tmr.c: Deschedule timer event after dispatching. | |
499 | Reduce unnecessarily high timer event frequency. | |
500 | * dv-tx3904cpu.c: Ditto for interrupt event. | |
501 | ||
502 | Wed Jun 10 13:22:32 1998 Frank Ch. Eigler <fche@cygnus.com> | |
503 | ||
504 | * interp.c (decode_coproc): For TX39, add stub COP0 register #7, | |
505 | to allay warnings. | |
506 | (interrupt_event): Made non-static. | |
507 | ||
508 | * dv-tx3904tmr.c (deliver_tx3904tmr_tick): Correct accidental | |
509 | interchange of configuration values for external vs. internal | |
510 | clock dividers. | |
511 | ||
512 | Tue Jun 9 12:46:24 1998 Ian Carmichael <iancarm@cygnus.com> | |
513 | ||
514 | * mips.igen (BREAK): Moved code to here for | |
515 | simulator-reserved break instructions. | |
516 | * gencode.c (build_instruction): Ditto. | |
517 | * interp.c (signal_exception): Code moved from here. Non- | |
518 | reserved instructions now use exception vector, rather | |
519 | than halting sim. | |
520 | * sim-main.h: Moved magic constants to here. | |
521 | ||
522 | Tue Jun 9 12:29:50 1998 Frank Ch. Eigler <fche@cygnus.com> | |
523 | ||
524 | * dv-tx3904cpu.c (deliver_*_interrupt,*_port_event): Set the CAUSE | |
525 | register upon non-zero interrupt event level, clear upon zero | |
526 | event value. | |
527 | * dv-tx3904irc.c (*_port_event): Handle deactivated interrupt signal | |
528 | by passing zero event value. | |
529 | (*_io_{read,write}_buffer): Endianness fixes. | |
530 | * dv-tx3904tmr.c (*_io_{read,write}_buffer): Endianness fixes. | |
531 | (deliver_*_tick): Reduce sim event interval to 75% of count interval. | |
532 | ||
533 | * interp.c (sim_open): Added jmr3904pal board type that adds PAL-based | |
534 | serial I/O and timer module at base address 0xFFFF0000. | |
535 | ||
536 | Tue Jun 9 11:52:29 1998 Gavin Koch <gavin@cygnus.com> | |
537 | ||
538 | * mips.igen (SWC1) : Correct the handling of ReverseEndian | |
539 | and BigEndianCPU. | |
540 | ||
541 | Tue Jun 9 11:40:57 1998 Gavin Koch <gavin@cygnus.com> | |
542 | ||
543 | * configure.in (mips_fpu_bitsize) : Set this correctly for 32-bit mips | |
544 | parts. | |
545 | * configure: Update. | |
546 | ||
547 | Thu Jun 4 15:37:33 1998 Frank Ch. Eigler <fche@cygnus.com> | |
548 | ||
549 | * dv-tx3904tmr.c: New file - implements tx3904 timer. | |
550 | * dv-tx3904{irc,cpu}.c: Mild reformatting. | |
551 | * configure.in: Include tx3904tmr in hw_device list. | |
552 | * configure: Rebuilt. | |
553 | * interp.c (sim_open): Instantiate three timer instances. | |
554 | Fix address typo of tx3904irc instance. | |
555 | ||
556 | Tue Jun 2 15:48:02 1998 Ian Carmichael <iancarm@cygnus.com> | |
557 | ||
558 | * interp.c (signal_exception): SystemCall exception now uses | |
559 | the exception vector. | |
560 | ||
561 | Mon Jun 1 18:18:26 1998 Frank Ch. Eigler <fche@cygnus.com> | |
562 | ||
563 | * interp.c (decode_coproc): For TX39, add stub COP0 register #3, | |
564 | to allay warnings. | |
565 | ||
566 | Fri May 29 11:40:39 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
567 | ||
568 | * configure.in (sim_igen_filter): Match mips*tx39 not mipst*tx39. | |
569 | ||
570 | Mon May 25 20:47:45 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
571 | ||
572 | * dv-tx3904cpu.c, dv-tx3904irc.c: Rename *_callback to *_method. | |
573 | ||
574 | * dv-tx3904cpu.c, dv-tx3904irc.c: Include hw-main.h and | |
575 | sim-main.h. Declare a struct hw_descriptor instead of struct | |
576 | hw_device_descriptor. | |
577 | ||
578 | Mon May 25 12:41:38 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
579 | ||
580 | * mips.igen (do_store_left, do_load_left): Compute nr of left and | |
581 | right bits and then re-align left hand bytes to correct byte | |
582 | lanes. Fix incorrect computation in do_store_left when loading | |
583 | bytes from second word. | |
584 | ||
585 | Fri May 22 13:34:20 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
586 | ||
587 | * configure.in (SIM_AC_OPTION_HARDWARE): Only enable when tx3904. | |
588 | * interp.c (sim_open): Only create a device tree when HW is | |
589 | enabled. | |
590 | ||
591 | * dv-tx3904irc.c (tx3904irc_finish): Pacify GCC. | |
592 | * interp.c (signal_exception): Ditto. | |
593 | ||
594 | Thu May 21 14:24:11 1998 Gavin Koch <gavin@cygnus.com> | |
595 | ||
596 | * gencode.c: Mark BEGEZALL as LIKELY. | |
597 | ||
598 | Thu May 21 18:57:19 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
599 | ||
600 | * sim-main.h (ALU32_END): Sign extend 32 bit results. | |
601 | * mips.igen (ADD, SUB, ADDI, DADD, DSUB): Trace. | |
602 | ||
603 | Mon May 18 18:22:42 1998 Frank Ch. Eigler <fche@cygnus.com> | |
604 | ||
605 | * configure.in (SIM_AC_OPTION_HARDWARE): Added common hardware | |
606 | modules. Recognize TX39 target with "mips*tx39" pattern. | |
607 | * configure: Rebuilt. | |
608 | * sim-main.h (*): Added many macros defining bits in | |
609 | TX39 control registers. | |
610 | (SignalInterrupt): Send actual PC instead of NULL. | |
611 | (SignalNMIReset): New exception type. | |
612 | * interp.c (board): New variable for future use to identify | |
613 | a particular board being simulated. | |
614 | (mips_option_handler,mips_options): Added "--board" option. | |
615 | (interrupt_event): Send actual PC. | |
616 | (sim_open): Make memory layout conditional on board setting. | |
617 | (signal_exception): Initial implementation of hardware interrupt | |
618 | handling. Accept another break instruction variant for simulator | |
619 | exit. | |
620 | (decode_coproc): Implement RFE instruction for TX39. | |
621 | (mips.igen): Decode RFE instruction as such. | |
622 | * configure.in (tx3904cpu,tx3904irc): Added devices for tx3904. | |
623 | * interp.c: Define "jmr3904" and "jmr3904debug" board types and | |
624 | bbegin to implement memory map. | |
625 | * dv-tx3904cpu.c: New file. | |
626 | * dv-tx3904irc.c: New file. | |
627 | ||
628 | Wed May 13 14:40:11 1998 Gavin Koch <gavin@cygnus.com> | |
629 | ||
630 | * mips.igen (check_mt_hilo): Create a separate r3900 version. | |
631 | ||
632 | Wed May 13 14:11:46 1998 Gavin Koch <gavin@cygnus.com> | |
633 | ||
634 | * tx.igen (madd,maddu): Replace calls to check_op_hilo | |
635 | with calls to check_div_hilo. | |
636 | ||
637 | Wed May 13 09:59:27 1998 Gavin Koch <gavin@cygnus.com> | |
638 | ||
639 | * mips/mips.igen (check_op_hilo,check_mult_hilo,check_div_hilo): | |
640 | Replace check_op_hilo with check_mult_hilo and check_div_hilo. | |
641 | Add special r3900 version of do_mult_hilo. | |
642 | (do_dmultx,do_mult,do_multu): Replace calls to check_op_hilo | |
643 | with calls to check_mult_hilo. | |
644 | (do_ddiv,do_ddivu,do_div,do_divu): Replace calls to check_op_hilo | |
645 | with calls to check_div_hilo. | |
646 | ||
647 | Tue May 12 15:22:11 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
648 | ||
649 | * configure.in (SUBTARGET_R3900): Define for mipstx39 target. | |
650 | Document a replacement. | |
651 | ||
652 | Fri May 8 17:48:19 1998 Ian Carmichael <iancarm@cygnus.com> | |
653 | ||
654 | * interp.c (sim_monitor): Make mon_printf work. | |
655 | ||
656 | Wed May 6 19:42:19 1998 Doug Evans <devans@canuck.cygnus.com> | |
657 | ||
658 | * sim-main.h (INSN_NAME): New arg `cpu'. | |
659 | ||
660 | Tue Apr 28 18:33:31 1998 Geoffrey Noer <noer@cygnus.com> | |
661 | ||
662 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
663 | ||
664 | Sun Apr 26 15:31:55 1998 Tom Tromey <tromey@creche> | |
665 | ||
666 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
667 | * config.in: Ditto. | |
668 | ||
669 | Sun Apr 26 15:20:01 1998 Tom Tromey <tromey@cygnus.com> | |
670 | ||
671 | * acconfig.h: New file. | |
672 | * configure.in: Reverted change of Apr 24; use sinclude again. | |
673 | ||
674 | Fri Apr 24 14:16:40 1998 Tom Tromey <tromey@creche> | |
675 | ||
676 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
677 | * config.in: Ditto. | |
678 | ||
679 | Fri Apr 24 11:19:20 1998 Tom Tromey <tromey@cygnus.com> | |
680 | ||
681 | * configure.in: Don't call sinclude. | |
682 | ||
683 | Fri Apr 24 11:35:01 1998 Andrew Cagney <cagney@chook.cygnus.com> | |
684 | ||
685 | * mips.igen (do_store_left): Pass 0 not NULL to store_memory. | |
686 | ||
687 | Tue Apr 21 11:59:50 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
688 | ||
689 | * mips.igen (ERET): Implement. | |
690 | ||
691 | * interp.c (decode_coproc): Return sign-extended EPC. | |
692 | ||
693 | * mips.igen (ANDI, LUI, MFC0): Add tracing code. | |
694 | ||
695 | * interp.c (signal_exception): Do not ignore Trap. | |
696 | (signal_exception): On TRAP, restart at exception address. | |
697 | (HALT_INSTRUCTION, HALT_INSTRUCTION_MASK): Define. | |
698 | (signal_exception): Update. | |
699 | (sim_open): Patch V_COMMON interrupt vector with an abort sequence | |
700 | so that TRAP instructions are caught. | |
701 | ||
702 | Mon Apr 20 11:26:55 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
703 | ||
704 | * sim-main.h (struct hilo_access, struct hilo_history): Define, | |
705 | contains HI/LO access history. | |
706 | (struct _sim_cpu): Make hiaccess and loaccess of type hilo_access. | |
707 | (HIACCESS, LOACCESS): Delete, replace with | |
708 | (HIHISTORY, LOHISTORY): New macros. | |
709 | (CHECKHILO): Delete all, moved to mips.igen | |
710 | ||
711 | * gencode.c (build_instruction): Do not generate checks for | |
712 | correct HI/LO register usage. | |
713 | ||
714 | * interp.c (old_engine_run): Delete checks for correct HI/LO | |
715 | register usage. | |
716 | ||
717 | * mips.igen (check_mt_hilo, check_mf_hilo, check_op_hilo, | |
718 | check_mf_cycles): New functions. | |
719 | (do_mfhi, do_mflo, "mthi", "mtlo", do_ddiv, do_ddivu, do_div, | |
720 | do_divu, domultx, do_mult, do_multu): Use. | |
721 | ||
722 | * tx.igen ("madd", "maddu"): Use. | |
723 | ||
724 | Wed Apr 15 18:31:54 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
725 | ||
726 | * mips.igen (DSRAV): Use function do_dsrav. | |
727 | (SRAV): Use new function do_srav. | |
728 | ||
729 | * m16.igen (BEQZ, BNEZ): Compare GPR[TRX] not GPR[RX]. | |
730 | (B): Sign extend 11 bit immediate. | |
731 | (EXT-B*): Shift 16 bit immediate left by 1. | |
732 | (ADDIU*): Don't sign extend immediate value. | |
733 | ||
734 | Wed Apr 15 10:32:15 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
735 | ||
736 | * m16run.c (sim_engine_run): Restore CIA after handling an event. | |
737 | ||
738 | * sim-main.h (DELAY_SLOT, NULLIFY_NEXT_INSTRUCTION): For IGEN, use | |
739 | functions. | |
740 | ||
741 | * mips.igen (delayslot32, nullify_next_insn): New functions. | |
742 | (m16.igen): Always include. | |
743 | (do_*): Add more tracing. | |
744 | ||
745 | * m16.igen (delayslot16): Add NIA argument, could be called by a | |
746 | 32 bit MIPS16 instruction. | |
747 | ||
748 | * interp.c (ifetch16): Move function from here. | |
749 | * sim-main.c (ifetch16): To here. | |
750 | ||
751 | * sim-main.c (ifetch16, ifetch32): Update to match current | |
752 | implementations of LH, LW. | |
753 | (signal_exception): Don't print out incorrect hex value of illegal | |
754 | instruction. | |
755 | ||
756 | Wed Apr 15 00:17:25 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
757 | ||
758 | * m16run.c (sim_engine_run): Use IMEM16 and IMEM32 to fetch an | |
759 | instruction. | |
760 | ||
761 | * m16.igen: Implement MIPS16 instructions. | |
762 | ||
763 | * mips.igen (do_addiu, do_addu, do_and, do_daddiu, do_daddu, | |
764 | do_ddiv, do_ddivu, do_div, do_divu, do_dmultx, do_dmultu, do_srav, | |
765 | do_dsubu, do_mfhi, do_mflo, do_mult, do_multu, do_nor, do_or, | |
766 | do_sll, do_sllv, do_slt, do_slti, do_sltiu, do_sltu, do_sra, | |
767 | do_srl, do_srlv, do_subu, do_xor, do_xori): New functions. Move | |
768 | bodies of corresponding code from 32 bit insn to these. Also used | |
769 | by MIPS16 versions of functions. | |
770 | ||
771 | * sim-main.h (RAIDX, T8IDX, T8, SPIDX): Define. | |
772 | (IMEM16): Drop NR argument from macro. | |
773 | ||
774 | Sat Apr 4 22:39:50 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
775 | ||
776 | * Makefile.in (SIM_OBJS): Add sim-main.o. | |
777 | ||
778 | * sim-main.h (address_translation, load_memory, store_memory, | |
779 | cache_op, sync_operation, prefetch, ifetch32, pending_tick): Mark | |
780 | as INLINE_SIM_MAIN. | |
781 | (pr_addr, pr_uword64): Declare. | |
782 | (sim-main.c): Include when H_REVEALS_MODULE_P. | |
783 | ||
784 | * interp.c (address_translation, load_memory, store_memory, | |
785 | cache_op, sync_operation, prefetch, ifetch32, pending_tick): Move | |
786 | from here. | |
787 | * sim-main.c: To here. Fix compilation problems. | |
788 | ||
789 | * configure.in: Enable inlining. | |
790 | * configure: Re-config. | |
791 | ||
792 | Sat Apr 4 20:36:25 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
793 | ||
794 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
795 | ||
796 | Fri Apr 3 04:32:35 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
797 | ||
798 | * mips.igen: Include tx.igen. | |
799 | * Makefile.in (IGEN_INCLUDE): Add tx.igen. | |
800 | * tx.igen: New file, contains MADD and MADDU. | |
801 | ||
802 | * interp.c (load_memory): When shifting bytes, use LOADDRMASK not | |
803 | the hardwired constant `7'. | |
804 | (store_memory): Ditto. | |
805 | (LOADDRMASK): Move definition to sim-main.h. | |
806 | ||
807 | mips.igen (MTC0): Enable for r3900. | |
808 | (ADDU): Add trace. | |
809 | ||
810 | mips.igen (do_load_byte): Delete. | |
811 | (do_load, do_store, do_load_left, do_load_write, do_store_left, | |
812 | do_store_right): New functions. | |
813 | (SW*, LW*, SD*, LD*, SH, LH, SB, LB): Use. | |
814 | ||
815 | configure.in: Let the tx39 use igen again. | |
816 | configure: Update. | |
817 | ||
818 | Thu Apr 2 10:59:39 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
819 | ||
820 | * interp.c (sim_monitor): get_mem_info returns a 4 byte quantity, | |
821 | not an address sized quantity. Return zero for cache sizes. | |
822 | ||
823 | Wed Apr 1 23:47:53 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
824 | ||
825 | * mips.igen (r3900): r3900 does not support 64 bit integer | |
826 | operations. | |
827 | ||
828 | Mon Mar 30 14:46:05 1998 Gavin Koch <gavin@cygnus.com> | |
829 | ||
830 | * configure.in (mipstx39*-*-*): Use gencode simulator rather | |
831 | than igen one. | |
832 | * configure : Rebuild. | |
833 | ||
834 | Fri Mar 27 16:15:52 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
835 | ||
836 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
837 | ||
838 | Fri Mar 27 15:01:50 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
839 | ||
840 | * interp.c (mips_option_handler): Iterate over MAX_NR_PROCESSORS. | |
841 | ||
842 | Wed Mar 25 16:44:27 1998 Ian Carmichael <iancarm@cygnus.com> | |
843 | ||
844 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
845 | * config.in: Regenerated to track ../common/aclocal.m4 changes. | |
846 | ||
847 | Wed Mar 25 12:35:29 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
848 | ||
849 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
850 | ||
851 | Wed Mar 25 10:05:46 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
852 | ||
853 | * interp.c (Max, Min): Comment out functions. Not yet used. | |
854 | ||
855 | Wed Mar 18 12:38:12 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
856 | ||
857 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
858 | ||
859 | Tue Mar 17 19:05:20 1998 Frank Ch. Eigler <fche@cygnus.com> | |
860 | ||
861 | * Makefile.in (MIPS_EXTRA_LIBS, SIM_EXTRA_LIBS): Added | |
862 | configurable settings for stand-alone simulator. | |
863 | ||
864 | * configure.in: Added X11 search, just in case. | |
865 | ||
866 | * configure: Regenerated. | |
867 | ||
868 | Wed Mar 11 14:09:10 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
869 | ||
870 | * interp.c (sim_write, sim_read, load_memory, store_memory): | |
871 | Replace sim_core_*_map with read_map, write_map, exec_map resp. | |
872 | ||
873 | Tue Mar 3 13:58:43 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
874 | ||
875 | * sim-main.h (GETFCC): Return an unsigned value. | |
876 | ||
877 | Tue Mar 3 13:21:37 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
878 | ||
879 | * mips.igen (DIV): Fix check for -1 / MIN_INT. | |
880 | (DADD): Result destination is RD not RT. | |
881 | ||
882 | Fri Feb 27 13:49:49 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
883 | ||
884 | * sim-main.h (HIACCESS, LOACCESS): Always define. | |
885 | ||
886 | * mdmx.igen (Maxi, Mini): Rename Max, Min. | |
887 | ||
888 | * interp.c (sim_info): Delete. | |
889 | ||
890 | Fri Feb 27 18:41:01 1998 Doug Evans <devans@canuck.cygnus.com> | |
891 | ||
892 | * interp.c (DECLARE_OPTION_HANDLER): Use it. | |
893 | (mips_option_handler): New argument `cpu'. | |
894 | (sim_open): Update call to sim_add_option_table. | |
895 | ||
896 | Wed Feb 25 18:56:22 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
897 | ||
898 | * mips.igen (CxC1): Add tracing. | |
899 | ||
900 | Fri Feb 20 17:43:21 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
901 | ||
902 | * sim-main.h (Max, Min): Declare. | |
903 | ||
904 | * interp.c (Max, Min): New functions. | |
905 | ||
906 | * mips.igen (BC1): Add tracing. | |
907 | ||
908 | Thu Feb 19 14:50:00 1998 John Metzler <jmetzler@cygnus.com> | |
909 | ||
910 | * interp.c Added memory map for stack in vr4100 | |
911 | ||
912 | Thu Feb 19 10:21:21 1998 Gavin Koch <gavin@cygnus.com> | |
913 | ||
914 | * interp.c (load_memory): Add missing "break"'s. | |
915 | ||
916 | Tue Feb 17 12:45:35 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
917 | ||
918 | * interp.c (sim_store_register, sim_fetch_register): Pass in | |
919 | length parameter. Return -1. | |
920 | ||
921 | Tue Feb 10 11:57:40 1998 Ian Carmichael <iancarm@cygnus.com> | |
922 | ||
923 | * interp.c: Added hardware init hook, fixed warnings. | |
924 | ||
925 | Sat Feb 7 17:16:20 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
926 | ||
927 | * Makefile.in (itable.h itable.c): Depend on SIM_@sim_gen@_ALL. | |
928 | ||
929 | Tue Feb 3 11:36:02 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
930 | ||
931 | * interp.c (ifetch16): New function. | |
932 | ||
933 | * sim-main.h (IMEM32): Rename IMEM. | |
934 | (IMEM16_IMMED): Define. | |
935 | (IMEM16): Define. | |
936 | (DELAY_SLOT): Update. | |
937 | ||
938 | * m16run.c (sim_engine_run): New file. | |
939 | ||
940 | * m16.igen: All instructions except LB. | |
941 | (LB): Call do_load_byte. | |
942 | * mips.igen (do_load_byte): New function. | |
943 | (LB): Call do_load_byte. | |
944 | ||
945 | * mips.igen: Move spec for insn bit size and high bit from here. | |
946 | * Makefile.in (tmp-igen, tmp-m16): To here. | |
947 | ||
948 | * m16.dc: New file, decode mips16 instructions. | |
949 | ||
950 | * Makefile.in (SIM_NO_ALL): Define. | |
951 | (tmp-m16): Generate both 16 bit and 32 bit simulator engines. | |
952 | ||
953 | Tue Feb 3 11:28:00 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
954 | ||
955 | * configure.in (mips_fpu_bitsize): For tx39, restrict floating | |
956 | point unit to 32 bit registers. | |
957 | * configure: Re-generate. | |
958 | ||
959 | Sun Feb 1 15:47:14 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
960 | ||
961 | * configure.in (sim_use_gen): Make IGEN the default simulator | |
962 | generator for generic 32 and 64 bit mips targets. | |
963 | * configure: Re-generate. | |
964 | ||
965 | Sun Feb 1 16:52:37 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
966 | ||
967 | * sim-main.h (SizeFGR): Determine from floating-point and not gpr | |
968 | bitsize. | |
969 | ||
970 | * interp.c (sim_fetch_register, sim_store_register): Read/write | |
971 | FGR from correct location. | |
972 | (sim_open): Set size of FGR's according to | |
973 | WITH_TARGET_FLOATING_POINT_BITSIZE. | |
974 | ||
975 | * sim-main.h (FGR): Store floating point registers in a separate | |
976 | array. | |
977 | ||
978 | Sun Feb 1 16:47:51 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
979 | ||
980 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
981 | ||
982 | Tue Feb 3 00:10:50 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
983 | ||
984 | * interp.c (ColdReset): Call PENDING_INVALIDATE. | |
985 | ||
986 | * sim-main.h (ENGINE_ISSUE_PREFIX_HOOK): Call PENDING_TICK. | |
987 | ||
988 | * interp.c (pending_tick): New function. Deliver pending writes. | |
989 | ||
990 | * sim-main.h (PENDING_FILL, PENDING_TICK, PENDING_SCHED, | |
991 | PENDING_BIT, PENDING_INVALIDATE): Re-write pipeline code so that | |
992 | it can handle mixed sized quantites and single bits. | |
993 | ||
994 | Mon Feb 2 17:43:15 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
995 | ||
996 | * interp.c (oengine.h): Do not include when building with IGEN. | |
997 | (sim_open): Replace GPRLEN by WITH_TARGET_WORD_BITSIZE. | |
998 | (sim_info): Ditto for PROCESSOR_64BIT. | |
999 | (sim_monitor): Replace ut_reg with unsigned_word. | |
1000 | (*): Ditto for t_reg. | |
1001 | (LOADDRMASK): Define. | |
1002 | (sim_open): Remove defunct check that host FP is IEEE compliant, | |
1003 | using software to emulate floating point. | |
1004 | (value_fpr, ...): Always compile, was conditional on HASFPU. | |
1005 | ||
1006 | Sun Feb 1 11:15:29 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
1007 | ||
1008 | * sim-main.h (sim_state): Make the cpu array MAX_NR_PROCESSORS in | |
1009 | size. | |
1010 | ||
1011 | * interp.c (SD, CPU): Define. | |
1012 | (mips_option_handler): Set flags in each CPU. | |
1013 | (interrupt_event): Assume CPU 0 is the one being iterrupted. | |
1014 | (sim_close): Do not clear STATE, deleted anyway. | |
1015 | (sim_write, sim_read): Assume CPU zero's vm should be used for | |
1016 | data transfers. | |
1017 | (sim_create_inferior): Set the PC for all processors. | |
1018 | (sim_monitor, store_word, load_word, mips16_entry): Add cpu | |
1019 | argument. | |
1020 | (mips16_entry): Pass correct nr of args to store_word, load_word. | |
1021 | (ColdReset): Cold reset all cpu's. | |
1022 | (signal_exception): Pass cpu to sim_monitor & mips16_entry. | |
1023 | (sim_monitor, load_memory, store_memory, signal_exception): Use | |
1024 | `CPU' instead of STATE_CPU. | |
1025 | ||
1026 | ||
1027 | * sim-main.h: Replace uses of STATE_CPU with CPU. Replace sd with | |
1028 | SD or CPU_. | |
1029 | ||
1030 | * sim-main.h (signal_exception): Add sim_cpu arg. | |
1031 | (SignalException*): Pass both SD and CPU to signal_exception. | |
1032 | * interp.c (signal_exception): Update. | |
1033 | ||
1034 | * sim-main.h (value_fpr, store_fpr, dotrace, ifetch32), interp.c: | |
1035 | Ditto | |
1036 | (sync_operation, prefetch, cache_op, store_memory, load_memory, | |
1037 | address_translation): Ditto | |
1038 | (decode_coproc, cop_lw, cop_ld, cop_sw, cop_sd): Ditto. | |
1039 | ||
1040 | Sat Jan 31 18:15:41 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
1041 | ||
1042 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
1043 | ||
1044 | Sat Jan 31 14:49:24 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
1045 | ||
1046 | * interp.c (sim_engine_run): Add `nr_cpus' argument. | |
1047 | ||
1048 | * mips.igen (model): Map processor names onto BFD name. | |
1049 | ||
1050 | * sim-main.h (CPU_CIA): Delete. | |
1051 | (SET_CIA, GET_CIA): Define | |
1052 | ||
1053 | Wed Jan 21 16:16:27 1998 Andrew Cagney <cagney@b1.cygnus.com> | |
1054 | ||
1055 | * sim-main.h (GPR_SET): Define, used by igen when zeroing a | |
1056 | regiser. | |
1057 | ||
1058 | * configure.in (default_endian): Configure a big-endian simulator | |
1059 | by default. | |
1060 | * configure: Re-generate. | |
1061 | ||
1062 | Mon Jan 19 22:26:29 1998 Doug Evans <devans@seba> | |
1063 | ||
1064 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
1065 | ||
1066 | Mon Jan 5 20:38:54 1998 Mark Alexander <marka@cygnus.com> | |
1067 | ||
1068 | * interp.c (sim_monitor): Handle Densan monitor outbyte | |
1069 | and inbyte functions. | |
1070 | ||
1071 | 1997-12-29 Felix Lee <flee@cygnus.com> | |
1072 | ||
1073 | * interp.c (sim_engine_run): msvc cpp barfs on #if (a==b!=c). | |
1074 | ||
1075 | Wed Dec 17 14:48:20 1997 Jeffrey A Law (law@cygnus.com) | |
1076 | ||
1077 | * Makefile.in (tmp-igen): Arrange for $zero to always be | |
1078 | reset to zero after every instruction. | |
1079 | ||
1080 | Mon Dec 15 23:17:11 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1081 | ||
1082 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
1083 | * config.in: Ditto. | |
1084 | ||
1085 | Wed Dec 10 17:10:45 1997 Jeffrey A Law (law@cygnus.com) | |
1086 | ||
1087 | * mips.igen (MSUB): Fix to work like MADD. | |
1088 | * gencode.c (MSUB): Similarly. | |
1089 | ||
1090 | Thu Dec 4 09:21:05 1997 Doug Evans <devans@canuck.cygnus.com> | |
1091 | ||
1092 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
1093 | ||
1094 | Wed Nov 26 11:00:23 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1095 | ||
1096 | * mips.igen (LWC1): Correct assembler - lwc1 not swc1. | |
1097 | ||
1098 | Sun Nov 23 01:45:20 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1099 | ||
1100 | * sim-main.h (sim-fpu.h): Include. | |
1101 | ||
1102 | * interp.c (convert, SquareRoot, Recip, Divide, Multiply, Sub, | |
1103 | Add, Negate, AbsoluteValue, Equal, Less, Infinity, NaN): Rewrite | |
1104 | using host independant sim_fpu module. | |
1105 | ||
1106 | Thu Nov 20 19:56:22 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1107 | ||
1108 | * interp.c (signal_exception): Report internal errors with SIGABRT | |
1109 | not SIGQUIT. | |
1110 | ||
1111 | * sim-main.h (C0_CONFIG): New register. | |
1112 | (signal.h): No longer include. | |
1113 | ||
1114 | * interp.c (decode_coproc): Allow access C0_CONFIG to register. | |
1115 | ||
1116 | Tue Nov 18 15:33:48 1997 Doug Evans <devans@canuck.cygnus.com> | |
1117 | ||
1118 | * Makefile.in (SIM_OBJS): Use $(SIM_NEW_COMMON_OBJS). | |
1119 | ||
1120 | Fri Nov 14 11:56:48 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1121 | ||
1122 | * mips.igen: Tag vr5000 instructions. | |
1123 | (ANDI): Was missing mipsIV model, fix assembler syntax. | |
1124 | (do_c_cond_fmt): New function. | |
1125 | (C.cond.fmt): Handle mips I-III which do not support CC field | |
1126 | separatly. | |
1127 | (bc1): Handle mips IV which do not have a delaed FCC separatly. | |
1128 | (SDR): Mask paddr when BigEndianMem, not the converse as specified | |
1129 | in IV3.2 spec. | |
1130 | (DMULT, DMULTU): Force use of hosts 64bit multiplication. Handle | |
1131 | vr5000 which saves LO in a GPR separatly. | |
1132 | ||
1133 | * configure.in (enable-sim-igen): For vr5000, select vr5000 | |
1134 | specific instructions. | |
1135 | * configure: Re-generate. | |
1136 | ||
1137 | Wed Nov 12 14:42:52 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1138 | ||
1139 | * Makefile.in (SIM_OBJS): Add sim-fpu module. | |
1140 | ||
1141 | * interp.c (store_fpr), sim-main.h: Add separate fmt_uninterpreted_32 and | |
1142 | fmt_uninterpreted_64 bit cases to switch. Convert to | |
1143 | fmt_formatted, | |
1144 | ||
1145 | * sim-main.h (ENGINE_ISSUE_PREFIX_HOOK): Define, | |
1146 | ||
1147 | * mips.igen (SWR): Mask paddr when BigEndianMem, not the converse | |
1148 | as specified in IV3.2 spec. | |
1149 | (MTC1, DMTC1): Call StoreFPR to store the GPR in the FPR. | |
1150 | ||
1151 | Tue Nov 11 12:38:23 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1152 | ||
1153 | * mips.igen: Delay slot branches add OFFSET to NIA not CIA. | |
1154 | (MFC0, MTC0, SWC1, LWC1, SDC1, LDC1): Implement. | |
1155 | (MTC1, MFC1, DMTC1, DMFC1, CFC1, CTC1): Implement separate non | |
1156 | PENDING_FILL versions of instructions. Simplify. | |
1157 | (X): New function. | |
1158 | (MULT, MULTU): Implement separate RD==0 and RD!=0 versions of | |
1159 | instructions. | |
1160 | (BEQZ, ..., SLT, SLTI, TLT, TLE, TLI, ...): Explicitly cast GPR to | |
1161 | a signed value. | |
1162 | (MTHI, MFHI): Disable code checking HI-LO. | |
1163 | ||
1164 | * sim-main.h (dotrace,tracefh), interp.c: Make dotrace & tracefh | |
1165 | global. | |
1166 | (NULLIFY_NEXT_INSTRUCTION): Call dotrace. | |
1167 | ||
1168 | Thu Nov 6 16:36:35 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1169 | ||
1170 | * gencode.c (build_mips16_operands): Replace IPC with cia. | |
1171 | ||
1172 | * interp.c (sim_monitor, signal_exception, cache_op, store_fpr, | |
1173 | value_fpr, cop_ld, cop_lw, cop_sw, cop_sd, decode_coproc): Replace | |
1174 | IPC to `cia'. | |
1175 | (UndefinedResult): Replace function with macro/function | |
1176 | combination. | |
1177 | (sim_engine_run): Don't save PC in IPC. | |
1178 | ||
1179 | * sim-main.h (IPC): Delete. | |
1180 | ||
1181 | ||
1182 | * interp.c (signal_exception, store_word, load_word, | |
1183 | address_translation, load_memory, store_memory, cache_op, | |
1184 | prefetch, sync_operation, ifetch, value_fpr, store_fpr, convert, | |
1185 | cop_lw, cop_ld, cop_sw, cop_sd, decode_coproc, sim_monitor): Add | |
1186 | current instruction address - cia - argument. | |
1187 | (sim_read, sim_write): Call address_translation directly. | |
1188 | (sim_engine_run): Rename variable vaddr to cia. | |
1189 | (signal_exception): Pass cia to sim_monitor | |
1190 | ||
1191 | * sim-main.h (SignalException, LoadWord, StoreWord, CacheOp, | |
1192 | Prefetch, SyncOperation, ValueFPR, StoreFPR, Convert, COP_LW, | |
1193 | COP_LD, COP_SW, COP_SD, DecodeCoproc): Update. | |
1194 | ||
1195 | * sim-main.h (SignalExceptionSimulatorFault): Delete definition. | |
1196 | * interp.c (sim_open): Replace SignalExceptionSimulatorFault with | |
1197 | SIM_ASSERT. | |
1198 | ||
1199 | * interp.c (signal_exception): Pass restart address to | |
1200 | sim_engine_restart. | |
1201 | ||
1202 | * Makefile.in (semantics.o, engine.o, support.o, itable.o, | |
1203 | idecode.o): Add dependency. | |
1204 | ||
1205 | * sim-main.h (SIM_ENGINE_HALT_HOOK, SIM_ENGINE_RESUME_HOOK): | |
1206 | Delete definitions | |
1207 | (DELAY_SLOT): Update NIA not PC with branch address. | |
1208 | (NULLIFY_NEXT_INSTRUCTION): Set NIA to instruction after next. | |
1209 | ||
1210 | * mips.igen: Use CIA not PC in branch calculations. | |
1211 | (illegal): Call SignalException. | |
1212 | (BEQ, ADDIU): Fix assembler. | |
1213 | ||
1214 | Wed Nov 5 12:19:56 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1215 | ||
1216 | * m16.igen (JALX): Was missing. | |
1217 | ||
1218 | * configure.in (enable-sim-igen): New configuration option. | |
1219 | * configure: Re-generate. | |
1220 | ||
1221 | * sim-main.h (MAX_INSNS, INSN_NAME): Define. | |
1222 | ||
1223 | * interp.c (load_memory, store_memory): Delete parameter RAW. | |
1224 | (sim_read, sim_write): Use sim_core_{read,write}_buffer directly | |
1225 | bypassing {load,store}_memory. | |
1226 | ||
1227 | * sim-main.h (ByteSwapMem): Delete definition. | |
1228 | ||
1229 | * Makefile.in (SIM_OBJS): Add sim-memopt module. | |
1230 | ||
1231 | * interp.c (sim_do_command, sim_commands): Delete mips specific | |
1232 | commands. Handled by module sim-options. | |
1233 | ||
1234 | * sim-main.h (SIM_HAVE_FLATMEM): Undefine, use sim-core.o module. | |
1235 | (WITH_MODULO_MEMORY): Define. | |
1236 | ||
1237 | * interp.c (sim_info): Delete code printing memory size. | |
1238 | ||
1239 | * interp.c (mips_size): Nee sim_size, delete function. | |
1240 | (power2): Delete. | |
1241 | (monitor, monitor_base, monitor_size): Delete global variables. | |
1242 | (sim_open, sim_close): Delete code creating monitor and other | |
1243 | memory regions. Use sim-memopts module, via sim_do_commandf, to | |
1244 | manage memory regions. | |
1245 | (load_memory, store_memory): Use sim-core for memory model. | |
1246 | ||
1247 | * interp.c (address_translation): Delete all memory map code | |
1248 | except line forcing 32 bit addresses. | |
1249 | ||
1250 | Wed Nov 5 11:21:11 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1251 | ||
1252 | * sim-main.h (WITH_TRACE): Delete definition. Enables common | |
1253 | trace options. | |
1254 | ||
1255 | * interp.c (logfh, logfile): Delete globals. | |
1256 | (sim_open, sim_close): Delete code opening & closing log file. | |
1257 | (mips_option_handler): Delete -l and -n options. | |
1258 | (OPTION mips_options): Ditto. | |
1259 | ||
1260 | * interp.c (OPTION mips_options): Rename option trace to dinero. | |
1261 | (mips_option_handler): Update. | |
1262 | ||
1263 | Wed Nov 5 09:35:59 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1264 | ||
1265 | * interp.c (fetch_str): New function. | |
1266 | (sim_monitor): Rewrite using sim_read & sim_write. | |
1267 | (sim_open): Check magic number. | |
1268 | (sim_open): Write monitor vectors into memory using sim_write. | |
1269 | (MONITOR_BASE, MONITOR_SIZE, MEM_SIZE): Define. | |
1270 | (sim_read, sim_write): Simplify - transfer data one byte at a | |
1271 | time. | |
1272 | (load_memory, store_memory): Clarify meaning of parameter RAW. | |
1273 | ||
1274 | * sim-main.h (isHOST): Defete definition. | |
1275 | (isTARGET): Mark as depreciated. | |
1276 | (address_translation): Delete parameter HOST. | |
1277 | ||
1278 | * interp.c (address_translation): Delete parameter HOST. | |
1279 | ||
1280 | Wed Oct 29 11:13:56 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1281 | ||
1282 | * mips.igen: | |
1283 | ||
1284 | * Makefile.in (IGEN_INCLUDE): Files included by mips.igen. | |
1285 | (tmp-igen, tmp-m16): Depend on IGEN_INCLUDE. | |
1286 | ||
1287 | Tue Oct 28 11:06:47 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1288 | ||
1289 | * mips.igen: Add model filter field to records. | |
1290 | ||
1291 | Mon Oct 27 17:53:59 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1292 | ||
1293 | * Makefile.in (SIM_NO_CFLAGS): Define. Define WITH_IGEN=0. | |
1294 | ||
1295 | interp.c (sim_engine_run): Do not compile function sim_engine_run | |
1296 | when WITH_IGEN == 1. | |
1297 | ||
1298 | * configure.in (sim_igen_flags, sim_m16_flags): Set according to | |
1299 | target architecture. | |
1300 | ||
1301 | Makefile.in (tmp-igen, tmp-m16): Drop -F and -M options to | |
1302 | igen. Replace with configuration variables sim_igen_flags / | |
1303 | sim_m16_flags. | |
1304 | ||
1305 | * m16.igen: New file. Copy mips16 insns here. | |
1306 | * mips.igen: From here. | |
1307 | ||
1308 | Mon Oct 27 13:53:59 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1309 | ||
1310 | * Makefile.in (SIM_NO_OBJ): Define, move SIM_M16_OBJ, SIM_IGEN_OBJ | |
1311 | to top. | |
1312 | (tmp-igen, tmp-m16): Pass -I srcdir to igen. | |
1313 | ||
1314 | Sat Oct 25 16:51:40 1997 Gavin Koch <gavin@cygnus.com> | |
1315 | ||
1316 | * gencode.c (build_instruction): Follow sim_write's lead in using | |
1317 | BigEndianMem instead of !ByteSwapMem. | |
1318 | ||
1319 | Fri Oct 24 17:41:49 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1320 | ||
1321 | * configure.in (sim_gen): Dependent on target, select type of | |
1322 | generator. Always select old style generator. | |
1323 | ||
1324 | configure: Re-generate. | |
1325 | ||
1326 | Makefile.in (tmp-igen, tmp-m16, clean-m16, clean-igen): New | |
1327 | targets. | |
1328 | (SIM_M16_CFLAGS, SIM_M16_ALL, SIM_M16_OBJ, BUILT_SRC_FROM_M16, | |
1329 | SIM_IGEN_CFLAGS, SIM_IGEN_ALL, SIM_IGEN_OBJ, BUILT_SRC_FROM_IGEN, | |
1330 | IGEN_TRACE, IGEN_INSN, IGEN_DC): Define | |
1331 | (SIM_EXTRA_CFLAGS, SIM_EXTRA_ALL, SIM_OBJS): Add member | |
1332 | SIM_@sim_gen@_*, set by autoconf. | |
1333 | ||
1334 | Wed Oct 22 12:52:06 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1335 | ||
1336 | * sim-main.h (NULLIFY_NEXT_INSTRUCTION, DELAY_SLOT): Define. | |
1337 | ||
1338 | * interp.c (ColdReset): Remove #ifdef HASFPU, check | |
1339 | CURRENT_FLOATING_POINT instead. | |
1340 | ||
1341 | * interp.c (ifetch32): New function. Fetch 32 bit instruction. | |
1342 | (address_translation): Raise exception InstructionFetch when | |
1343 | translation fails and isINSTRUCTION. | |
1344 | ||
1345 | * interp.c (sim_open, sim_write, sim_monitor, store_word, | |
1346 | sim_engine_run): Change type of of vaddr and paddr to | |
1347 | address_word. | |
1348 | (address_translation, prefetch, load_memory, store_memory, | |
1349 | cache_op): Change type of vAddr and pAddr to address_word. | |
1350 | ||
1351 | * gencode.c (build_instruction): Change type of vaddr and paddr to | |
1352 | address_word. | |
1353 | ||
1354 | Mon Oct 20 15:29:04 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1355 | ||
1356 | * sim-main.h (ALU64_END, ALU32_END): Use ALU*_OVERFLOW_RESULT | |
1357 | macro to obtain result of ALU op. | |
1358 | ||
1359 | Tue Oct 21 17:39:14 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1360 | ||
1361 | * interp.c (sim_info): Call profile_print. | |
1362 | ||
1363 | Mon Oct 20 13:31:20 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1364 | ||
1365 | * Makefile.in (SIM_OBJS): Add sim-profile.o module. | |
1366 | ||
1367 | * sim-main.h (WITH_PROFILE): Do not define, defined in | |
1368 | common/sim-config.h. Use sim-profile module. | |
1369 | (simPROFILE): Delete defintion. | |
1370 | ||
1371 | * interp.c (PROFILE): Delete definition. | |
1372 | (mips_option_handler): Delete 'p', 'y' and 'x' profile options. | |
1373 | (sim_close): Delete code writing profile histogram. | |
1374 | (mips_set_profile, mips_set_profile_size, writeout16, writeout32): | |
1375 | Delete. | |
1376 | (sim_engine_run): Delete code profiling the PC. | |
1377 | ||
1378 | Mon Oct 20 13:31:20 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1379 | ||
1380 | * sim-main.h (SIGNEXTEND): Force type of result to unsigned_word. | |
1381 | ||
1382 | * interp.c (sim_monitor): Make register pointers of type | |
1383 | unsigned_word*. | |
1384 | ||
1385 | * sim-main.h: Make registers of type unsigned_word not | |
1386 | signed_word. | |
1387 | ||
1388 | Thu Oct 16 10:31:39 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1389 | ||
1390 | * interp.c (sync_operation): Rename from SyncOperation, make | |
1391 | global, add SD argument. | |
1392 | (prefetch): Rename from Prefetch, make global, add SD argument. | |
1393 | (decode_coproc): Make global. | |
1394 | ||
1395 | * sim-main.h (SyncOperation, DecodeCoproc, Pefetch): Define. | |
1396 | ||
1397 | * gencode.c (build_instruction): Generate DecodeCoproc not | |
1398 | decode_coproc calls. | |
1399 | ||
1400 | * interp.c (SETFCC, GETFCC, PREVCOC1): Move to sim-main.h | |
1401 | (SizeFGR): Move to sim-main.h | |
1402 | (simHALTEX, simHALTIN, simTRACE, simPROFILE, simDELAYSLOT, | |
1403 | simSIGINT, simJALDELAYSLOT): Move to sim-main.h | |
1404 | (FP_FLAGS, FP_ENABLE, FP_CAUSE, IR, UF, OF, DZ, IO, UO): Move to | |
1405 | sim-main.h. | |
1406 | (FP_FS, FP_MASK_RM, FP_SH_RM, FP_RM_NEAREST, FP_RM_TOPINF, | |
1407 | FP_RM_TOMINF, GETRM): Move to sim-main.h. | |
1408 | (Uncached, CachedNoncoherent, CachedCoherent, Cached, | |
1409 | isINSTRUCTION, ..., AccessLength_BYTE, ...): Move to sim-main.h. | |
1410 | (UserMode, BigEndianMem, ByteSwapMem, ReverseEndian, | |
1411 | BigEndianCPU, status_KSU_mask, ...). Moved to sim-main.h | |
1412 | ||
1413 | * sim-main.h (ALU32_END, ALU64_END): Define. When overflow raise | |
1414 | exception. | |
1415 | (sim-alu.h): Include. | |
1416 | (NULLIFY_NIA, NULL_CIA, CPU_CIA): Define. | |
1417 | (sim_cia): Typedef to instruction_address. | |
1418 | ||
1419 | Thu Oct 16 10:31:41 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1420 | ||
1421 | * Makefile.in (interp.o): Rename generated file engine.c to | |
1422 | oengine.c. | |
1423 | ||
1424 | * interp.c: Update. | |
1425 | ||
1426 | Thu Oct 16 10:31:40 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1427 | ||
1428 | * gencode.c (build_instruction): Use FPR_STATE not fpr_state. | |
1429 | ||
1430 | Thu Oct 16 10:31:39 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1431 | ||
1432 | * gencode.c (build_instruction): For "FPSQRT", output correct | |
1433 | number of arguments to Recip. | |
1434 | ||
1435 | Tue Oct 14 17:38:18 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1436 | ||
1437 | * Makefile.in (interp.o): Depends on sim-main.h | |
1438 | ||
1439 | * interp.c (mips16_entry, ColdReset,dotrace): Add SD argument. Use GPR not registers. | |
1440 | ||
1441 | * sim-main.h (sim_cpu): Add registers, register_widths, fpr_state, | |
1442 | ipc, dspc, pending_*, hiaccess, loaccess, state, dsstate fields. | |
1443 | (REGISTERS, REGISTER_WIDTHS, FPR_STATE, IPC, DSPC, PENDING_*, | |
1444 | STATE, DSSTATE): Define | |
1445 | (GPR, FGRIDX, ..): Define. | |
1446 | ||
1447 | * interp.c (registers, register_widths, fpr_state, ipc, dspc, | |
1448 | pending_*, hiaccess, loaccess, state, dsstate): Delete globals. | |
1449 | (GPR, FGRIDX, ...): Delete macros. | |
1450 | ||
1451 | * interp.c: Update names to match defines from sim-main.h | |
1452 | ||
1453 | Tue Oct 14 15:11:45 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1454 | ||
1455 | * interp.c (sim_monitor): Add SD argument. | |
1456 | (sim_warning): Delete. Replace calls with calls to | |
1457 | sim_io_eprintf. | |
1458 | (sim_error): Delete. Replace calls with sim_io_error. | |
1459 | (open_trace, writeout32, writeout16, getnum): Add SD argument. | |
1460 | (mips_set_profile): Rename from sim_set_profile. Add SD argument. | |
1461 | (mips_set_profile_size): Rename from sim_set_profile_size. Add SD | |
1462 | argument. | |
1463 | (mips_size): Rename from sim_size. Add SD argument. | |
1464 | ||
1465 | * interp.c (simulator): Delete global variable. | |
1466 | (callback): Delete global variable. | |
1467 | (mips_option_handler, sim_open, sim_write, sim_read, | |
1468 | sim_store_register, sim_fetch_register, sim_info, sim_do_command, | |
1469 | sim_size,sim_monitor): Use sim_io_* not callback->*. | |
1470 | (sim_open): ZALLOC simulator struct. | |
1471 | (PROFILE): Do not define. | |
1472 | ||
1473 | Tue Oct 14 13:35:48 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1474 | ||
1475 | * interp.c (sim_open), support.h: Replace CHECKSIM macro found in | |
1476 | support.h with corresponding code. | |
1477 | ||
1478 | * sim-main.h (word64, uword64), support.h: Move definition to | |
1479 | sim-main.h. | |
1480 | (WORD64LO, WORD64HI, SET64LO, SET64HI, WORD64, UWORD64): Ditto. | |
1481 | ||
1482 | * support.h: Delete | |
1483 | * Makefile.in: Update dependencies | |
1484 | * interp.c: Do not include. | |
1485 | ||
1486 | Tue Oct 14 13:35:48 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1487 | ||
1488 | * interp.c (address_translation, load_memory, store_memory, | |
1489 | cache_op): Rename to from AddressTranslation et.al., make global, | |
1490 | add SD argument | |
1491 | ||
1492 | * sim-main.h (AddressTranslation, LoadMemory, StoreMemory, | |
1493 | CacheOp): Define. | |
1494 | ||
1495 | * interp.c (SignalException): Rename to signal_exception, make | |
1496 | global. | |
1497 | ||
1498 | * interp.c (Interrupt, ...): Move definitions to sim-main.h. | |
1499 | ||
1500 | * sim-main.h (SignalException, SignalExceptionInterrupt, | |
1501 | SignalExceptionInstructionFetch, SignalExceptionAddressStore, | |
1502 | SignalExceptionAddressLoad, SignalExceptionSimulatorFault, | |
1503 | SignalExceptionIntegerOverflow, SignalExceptionCoProcessorUnusable): | |
1504 | Define. | |
1505 | ||
1506 | * interp.c, support.h: Use. | |
1507 | ||
1508 | Tue Oct 14 13:19:20 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1509 | ||
1510 | * interp.c (ValueFPR, StoreFPR), sim-main.h: Make global, rename | |
1511 | to value_fpr / store_fpr. Add SD argument. | |
1512 | (NaN, Infinity, Less, Equal, AbsoluteValue, Negate, Add, Sub, | |
1513 | Multiply, Divide, Recip, SquareRoot, Convert): Make global. | |
1514 | ||
1515 | * sim-main.h (ValueFPR, StoreFPR): Define. | |
1516 | ||
1517 | Tue Oct 14 13:06:55 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1518 | ||
1519 | * interp.c (sim_engine_run): Check consistency between configure | |
1520 | WITH_TARGET_WORD_BITSIZE and WITH_FLOATING_POINT and gensim GPRLEN | |
1521 | and HASFPU. | |
1522 | ||
1523 | * configure.in (mips_bitsize): Configure WITH_TARGET_WORD_BITSIZE. | |
1524 | (mips_fpu): Configure WITH_FLOATING_POINT. | |
1525 | (mips_endian): Configure WITH_TARGET_ENDIAN. | |
1526 | * configure: Update. | |
1527 | ||
1528 | Fri Oct 3 09:28:00 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1529 | ||
1530 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
1531 | ||
1532 | Mon Sep 29 14:45:00 1997 Bob Manson <manson@charmed.cygnus.com> | |
1533 | ||
1534 | * configure: Regenerated. | |
1535 | ||
1536 | Fri Sep 26 12:48:18 1997 Mark Alexander <marka@cygnus.com> | |
1537 | ||
1538 | * interp.c: Allow Debug, DEPC, and EPC registers to be examined in GDB. | |
1539 | ||
1540 | Thu Sep 25 11:15:22 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1541 | ||
1542 | * gencode.c (print_igen_insn_models): Assume certain architectures | |
1543 | include all mips* instructions. | |
1544 | (print_igen_insn_format): Use data_size==-1 as marker for MIPS16 | |
1545 | instruction. | |
1546 | ||
1547 | * Makefile.in (tmp.igen): Add target. Generate igen input from | |
1548 | gencode file. | |
1549 | ||
1550 | * gencode.c (FEATURE_IGEN): Define. | |
1551 | (main): Add --igen option. Generate output in igen format. | |
1552 | (process_instructions): Format output according to igen option. | |
1553 | (print_igen_insn_format): New function. | |
1554 | (print_igen_insn_models): New function. | |
1555 | (process_instructions): Only issue warnings and ignore | |
1556 | instructions when no FEATURE_IGEN. | |
1557 | ||
1558 | Wed Sep 24 17:38:57 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1559 | ||
1560 | * interp.c (COP_SD, COP_LD): Add UNUSED to pacify GCC for some | |
1561 | MIPS targets. | |
1562 | ||
1563 | Tue Sep 23 11:04:38 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1564 | ||
1565 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
1566 | ||
1567 | Tue Sep 23 10:19:51 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1568 | ||
1569 | * Makefile.in (SIM_ALIGNMENT, SIM_ENDIAN, SIM_HOSTENDIAN, | |
1570 | SIM_RESERVED_BITS): Delete, moved to common. | |
1571 | (SIM_EXTRA_CFLAGS): Update. | |
1572 | ||
1573 | Mon Sep 22 11:46:20 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1574 | ||
1575 | * configure.in: Configure non-strict memory alignment. | |
1576 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
1577 | ||
1578 | Fri Sep 19 17:45:25 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1579 | ||
1580 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
1581 | ||
1582 | Sat Sep 20 14:07:28 1997 Gavin Koch <gavin@cygnus.com> | |
1583 | ||
1584 | * gencode.c (SDBBP,DERET): Added (3900) insns. | |
1585 | (RFE): Turn on for 3900. | |
1586 | * interp.c (DebugBreakPoint,DEPC,Debug,Debug_*): Added. | |
1587 | (dsstate): Made global. | |
1588 | (SUBTARGET_R3900): Added. | |
1589 | (CANCELDELAYSLOT): New. | |
1590 | (SignalException): Ignore SystemCall rather than ignore and | |
1591 | terminate. Add DebugBreakPoint handling. | |
1592 | (decode_coproc): New insns RFE, DERET; and new registers Debug | |
1593 | and DEPC protected by SUBTARGET_R3900. | |
1594 | (sim_engine_run): Use CANCELDELAYSLOT rather than clearing | |
1595 | bits explicitly. | |
1596 | * Makefile.in,configure.in: Add mips subtarget option. | |
1597 | * configure: Update. | |
1598 | ||
1599 | Fri Sep 19 09:33:27 1997 Gavin Koch <gavin@cygnus.com> | |
1600 | ||
1601 | * gencode.c: Add r3900 (tx39). | |
1602 | ||
1603 | ||
1604 | Tue Sep 16 15:52:04 1997 Gavin Koch <gavin@cygnus.com> | |
1605 | ||
1606 | * gencode.c (build_instruction): Don't need to subtract 4 for | |
1607 | JALR, just 2. | |
1608 | ||
1609 | Tue Sep 16 11:32:28 1997 Gavin Koch <gavin@cygnus.com> | |
1610 | ||
1611 | * interp.c: Correct some HASFPU problems. | |
1612 | ||
1613 | Mon Sep 15 17:36:15 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1614 | ||
1615 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
1616 | ||
1617 | Fri Sep 12 12:01:39 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1618 | ||
1619 | * interp.c (mips_options): Fix samples option short form, should | |
1620 | be `x'. | |
1621 | ||
1622 | Thu Sep 11 09:35:29 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1623 | ||
1624 | * interp.c (sim_info): Enable info code. Was just returning. | |
1625 | ||
1626 | Tue Sep 9 17:30:57 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1627 | ||
1628 | * interp.c (decode_coproc): Clarify warning about unsuported MTC0, | |
1629 | MFC0. | |
1630 | ||
1631 | Tue Sep 9 16:28:28 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1632 | ||
1633 | * gencode.c (build_instruction): Use SIGNED64 for 64 bit | |
1634 | constants. | |
1635 | (build_instruction): Ditto for LL. | |
1636 | ||
1637 | Thu Sep 4 17:21:23 1997 Doug Evans <dje@seba> | |
1638 | ||
1639 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
1640 | ||
1641 | Wed Aug 27 18:13:22 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1642 | ||
1643 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
1644 | * config.in: Ditto. | |
1645 | ||
1646 | Wed Aug 27 14:12:27 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1647 | ||
1648 | * interp.c (sim_open): Add call to sim_analyze_program, update | |
1649 | call to sim_config. | |
1650 | ||
1651 | Tue Aug 26 10:40:07 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1652 | ||
1653 | * interp.c (sim_kill): Delete. | |
1654 | (sim_create_inferior): Add ABFD argument. Set PC from same. | |
1655 | (sim_load): Move code initializing trap handlers from here. | |
1656 | (sim_open): To here. | |
1657 | (sim_load): Delete, use sim-hload.c. | |
1658 | ||
1659 | * Makefile.in (SIM_OBJS): Add sim-hload.o module. | |
1660 | ||
1661 | Mon Aug 25 17:50:22 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1662 | ||
1663 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
1664 | * config.in: Ditto. | |
1665 | ||
1666 | Mon Aug 25 15:59:48 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1667 | ||
1668 | * interp.c (sim_open): Add ABFD argument. | |
1669 | (sim_load): Move call to sim_config from here. | |
1670 | (sim_open): To here. Check return status. | |
1671 | ||
1672 | Fri Jul 25 15:00:45 1997 Gavin Koch <gavin@cygnus.com> | |
1673 | ||
1674 | * gencode.c (build_instruction): Two arg MADD should | |
1675 | not assign result to $0. | |
1676 | ||
1677 | Thu Jun 26 12:13:17 1997 Angela Marie Thomas (angela@cygnus.com) | |
1678 | ||
1679 | * sim/mips/configure: Change default_sim_endian to 0 (bi-endian) | |
1680 | * sim/mips/configure.in: Regenerate. | |
1681 | ||
1682 | Wed Jul 9 10:29:21 1997 Andrew Cagney <cagney@critters.cygnus.com> | |
1683 | ||
1684 | * interp.c (SUB_REG_UW, SUB_REG_SW, SUB_REG_*): Use more explicit | |
1685 | signed8, unsigned8 et.al. types. | |
1686 | ||
1687 | * interp.c (SUB_REG_FETCH): Handle both little and big endian | |
1688 | hosts when selecting subreg. | |
1689 | ||
1690 | Wed Jul 2 11:54:10 1997 Jeffrey A Law (law@cygnus.com) | |
1691 | ||
1692 | * interp.c (sim_engine_run): Reset the ZERO register to zero | |
1693 | regardless of FEATURE_WARN_ZERO. | |
1694 | * gencode.c (FEATURE_WARNINGS): Remove FEATURE_WARN_ZERO. | |
1695 | ||
1696 | Wed Jun 4 10:43:14 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1697 | ||
1698 | * interp.c (decode_coproc): Implement MTC0 N, CAUSE. | |
1699 | (SignalException): For BreakPoints ignore any mode bits and just | |
1700 | save the PC. | |
1701 | (SignalException): Always set the CAUSE register. | |
1702 | ||
1703 | Tue Jun 3 05:00:33 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1704 | ||
1705 | * interp.c (SignalException): Clear the simDELAYSLOT flag when an | |
1706 | exception has been taken. | |
1707 | ||
1708 | * interp.c: Implement the ERET and mt/f sr instructions. | |
1709 | ||
1710 | Sat May 31 00:44:16 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1711 | ||
1712 | * interp.c (SignalException): Don't bother restarting an | |
1713 | interrupt. | |
1714 | ||
1715 | Fri May 30 23:41:48 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1716 | ||
1717 | * interp.c (SignalException): Really take an interrupt. | |
1718 | (interrupt_event): Only deliver interrupts when enabled. | |
1719 | ||
1720 | Tue May 27 20:08:06 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1721 | ||
1722 | * interp.c (sim_info): Only print info when verbose. | |
1723 | (sim_info) Use sim_io_printf for output. | |
1724 | ||
1725 | Tue May 27 14:22:23 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1726 | ||
1727 | * interp.c (CoProcPresent): Add UNUSED attribute - not used by all | |
1728 | mips architectures. | |
1729 | ||
1730 | Tue May 27 14:22:23 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1731 | ||
1732 | * interp.c (sim_do_command): Check for common commands if a | |
1733 | simulator specific command fails. | |
1734 | ||
1735 | Thu May 22 09:32:03 1997 Gavin Koch <gavin@cygnus.com> | |
1736 | ||
1737 | * interp.c (sim_engine_run): ifdef out uses of simSTOP, simSTEP | |
1738 | and simBE when DEBUG is defined. | |
1739 | ||
1740 | Wed May 21 09:08:10 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1741 | ||
1742 | * interp.c (interrupt_event): New function. Pass exception event | |
1743 | onto exception handler. | |
1744 | ||
1745 | * configure.in: Check for stdlib.h. | |
1746 | * configure: Regenerate. | |
1747 | ||
1748 | * gencode.c (build_instruction): Add UNUSED attribute to tempS | |
1749 | variable declaration. | |
1750 | (build_instruction): Initialize memval1. | |
1751 | (build_instruction): Add UNUSED attribute to byte, bigend, | |
1752 | reverse. | |
1753 | (build_operands): Ditto. | |
1754 | ||
1755 | * interp.c: Fix GCC warnings. | |
1756 | (sim_get_quit_code): Delete. | |
1757 | ||
1758 | * configure.in: Add INLINE, ENDIAN, HOSTENDIAN and WARNINGS. | |
1759 | * Makefile.in: Ditto. | |
1760 | * configure: Re-generate. | |
1761 | ||
1762 | * Makefile.in (SIM_OBJS): Add sim-watch.o module. | |
1763 | ||
1764 | Tue May 20 15:08:56 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1765 | ||
1766 | * interp.c (mips_option_handler): New function parse argumes using | |
1767 | sim-options. | |
1768 | (myname): Replace with STATE_MY_NAME. | |
1769 | (sim_open): Delete check for host endianness - performed by | |
1770 | sim_config. | |
1771 | (simHOSTBE, simBE): Delete, replaced by sim-endian flags. | |
1772 | (sim_open): Move much of the initialization from here. | |
1773 | (sim_load): To here. After the image has been loaded and | |
1774 | endianness set. | |
1775 | (sim_open): Move ColdReset from here. | |
1776 | (sim_create_inferior): To here. | |
1777 | (sim_open): Make FP check less dependant on host endianness. | |
1778 | ||
1779 | * Makefile.in (SIM_RUN_OBJS): Set to nrun.o - use new version or | |
1780 | run. | |
1781 | * interp.c (sim_set_callbacks): Delete. | |
1782 | ||
1783 | * interp.c (membank, membank_base, membank_size): Replace with | |
1784 | STATE_MEMORY, STATE_MEM_SIZE, STATE_MEM_BASE. | |
1785 | (sim_open): Remove call to callback->init. gdb/run do this. | |
1786 | ||
1787 | * interp.c: Update | |
1788 | ||
1789 | * sim-main.h (SIM_HAVE_FLATMEM): Define. | |
1790 | ||
1791 | * interp.c (big_endian_p): Delete, replaced by | |
1792 | current_target_byte_order. | |
1793 | ||
1794 | Tue May 20 13:55:00 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1795 | ||
1796 | * interp.c (host_read_long, host_read_word, host_swap_word, | |
1797 | host_swap_long): Delete. Using common sim-endian. | |
1798 | (sim_fetch_register, sim_store_register): Use H2T. | |
1799 | (pipeline_ticks): Delete. Handled by sim-events. | |
1800 | (sim_info): Update. | |
1801 | (sim_engine_run): Update. | |
1802 | ||
1803 | Tue May 20 13:42:03 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1804 | ||
1805 | * interp.c (sim_stop_reason): Move code determining simEXCEPTION | |
1806 | reason from here. | |
1807 | (SignalException): To here. Signal using sim_engine_halt. | |
1808 | (sim_stop_reason): Delete, moved to common. | |
1809 | ||
1810 | Tue May 20 10:19:48 1997 Andrew Cagney <cagney@b2.cygnus.com> | |
1811 | ||
1812 | * interp.c (sim_open): Add callback argument. | |
1813 | (sim_set_callbacks): Delete SIM_DESC argument. | |
1814 | (sim_size): Ditto. | |
1815 | ||
1816 | Mon May 19 18:20:38 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1817 | ||
1818 | * Makefile.in (SIM_OBJS): Add common modules. | |
1819 | ||
1820 | * interp.c (sim_set_callbacks): Also set SD callback. | |
1821 | (set_endianness, xfer_*, swap_*): Delete. | |
1822 | (host_read_word, host_read_long, host_swap_word, host_swap_long): | |
1823 | Change to functions using sim-endian macros. | |
1824 | (control_c, sim_stop): Delete, use common version. | |
1825 | (simulate): Convert into. | |
1826 | (sim_engine_run): This function. | |
1827 | (sim_resume): Delete. | |
1828 | ||
1829 | * interp.c (simulation): New variable - the simulator object. | |
1830 | (sim_kind): Delete global - merged into simulation. | |
1831 | (sim_load): Cleanup. Move PC assignment from here. | |
1832 | (sim_create_inferior): To here. | |
1833 | ||
1834 | * sim-main.h: New file. | |
1835 | * interp.c (sim-main.h): Include. | |
1836 | ||
1837 | Thu Apr 24 00:39:51 1997 Doug Evans <dje@canuck.cygnus.com> | |
1838 | ||
1839 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
1840 | ||
1841 | Wed Apr 23 17:32:19 1997 Doug Evans <dje@canuck.cygnus.com> | |
1842 | ||
1843 | * tconfig.in (SIM_HAVE_BIENDIAN): Define. | |
1844 | ||
1845 | Mon Apr 21 17:16:13 1997 Gavin Koch <gavin@cygnus.com> | |
1846 | ||
1847 | * gencode.c (build_instruction): DIV instructions: check | |
1848 | for division by zero and integer overflow before using | |
1849 | host's division operation. | |
1850 | ||
1851 | Thu Apr 17 03:18:14 1997 Doug Evans <dje@canuck.cygnus.com> | |
1852 | ||
1853 | * Makefile.in (SIM_OBJS): Add sim-load.o. | |
1854 | * interp.c: #include bfd.h. | |
1855 | (target_byte_order): Delete. | |
1856 | (sim_kind, myname, big_endian_p): New static locals. | |
1857 | (sim_open): Set sim_kind, myname. Move call to set_endianness to | |
1858 | after argument parsing. Recognize -E arg, set endianness accordingly. | |
1859 | (sim_load): Return SIM_RC. New arg abfd. Call sim_load_file to | |
1860 | load file into simulator. Set PC from bfd. | |
1861 | (sim_create_inferior): Return SIM_RC. Delete arg start_address. | |
1862 | (set_endianness): Use big_endian_p instead of target_byte_order. | |
1863 | ||
1864 | Wed Apr 16 17:55:37 1997 Andrew Cagney <cagney@b1.cygnus.com> | |
1865 | ||
1866 | * interp.c (sim_size): Delete prototype - conflicts with | |
1867 | definition in remote-sim.h. Correct definition. | |
1868 | ||
1869 | Mon Apr 7 15:45:02 1997 Andrew Cagney <cagney@kremvax.cygnus.com> | |
1870 | ||
1871 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
1872 | * config.in: Ditto. | |
1873 | ||
1874 | Wed Apr 2 15:06:28 1997 Doug Evans <dje@canuck.cygnus.com> | |
1875 | ||
1876 | * interp.c (sim_open): New arg `kind'. | |
1877 | ||
1878 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
1879 | ||
1880 | Wed Apr 2 14:34:19 1997 Andrew Cagney <cagney@kremvax.cygnus.com> | |
1881 | ||
1882 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
1883 | ||
1884 | Tue Mar 25 11:38:22 1997 Doug Evans <dje@canuck.cygnus.com> | |
1885 | ||
1886 | * interp.c (sim_open): Set optind to 0 before calling getopt. | |
1887 | ||
1888 | Wed Mar 19 01:14:00 1997 Andrew Cagney <cagney@kremvax.cygnus.com> | |
1889 | ||
1890 | * configure: Regenerated to track ../common/aclocal.m4 changes. | |
1891 | ||
1892 | Mon Mar 17 10:52:59 1997 Gavin Koch <gavin@cetus.cygnus.com> | |
1893 | ||
1894 | * interp.c : Replace uses of pr_addr with pr_uword64 | |
1895 | where the bit length is always 64 independent of SIM_ADDR. | |
1896 | (pr_uword64) : added. | |
1897 | ||
1898 | Mon Mar 17 15:10:07 1997 Andrew Cagney <cagney@kremvax.cygnus.com> | |
1899 | ||
1900 | * configure: Re-generate. | |
1901 | ||
1902 | Fri Mar 14 10:34:11 1997 Michael Meissner <meissner@cygnus.com> | |
1903 | ||
1904 | * configure: Regenerate to track ../common/aclocal.m4 changes. | |
1905 | ||
1906 | Thu Mar 13 12:51:36 1997 Doug Evans <dje@canuck.cygnus.com> | |
1907 | ||
1908 | * interp.c (sim_open): New SIM_DESC result. Argument is now | |
1909 | in argv form. | |
1910 | (other sim_*): New SIM_DESC argument. | |
1911 | ||
1912 | Mon Feb 24 22:47:14 1997 Dawn Perchik <dawn@cygnus.com> | |
1913 | ||
1914 | * interp.c: Fix printing of addresses for non-64-bit targets. | |
1915 | (pr_addr): Add function to print address based on size. | |
1916 | ||
1917 | Wed Feb 19 14:42:09 1997 Mark Alexander <marka@cygnus.com> | |
1918 | ||
1919 | * interp.c (simopen): Add support for LSI MiniRISC PMON vectors. | |
1920 | ||
1921 | Thu Feb 13 14:08:30 1997 Ian Lance Taylor <ian@cygnus.com> | |
1922 | ||
1923 | * gencode.c (build_mips16_operands): Correct computation of base | |
1924 | address for extended PC relative instruction. | |
1925 | ||
1926 | Thu Feb 6 17:16:15 1997 Ian Lance Taylor <ian@cygnus.com> | |
1927 | ||
1928 | * interp.c (mips16_entry): Add support for floating point cases. | |
1929 | (SignalException): Pass floating point cases to mips16_entry. | |
1930 | (ValueFPR): Don't restrict fmt_single and fmt_word to even | |
1931 | registers. | |
1932 | (StoreFPR): Likewise. Also, don't clobber fpr + 1 for fmt_single | |
1933 | or fmt_word. | |
1934 | (COP_LW): Pass fmt_word rather than fmt_uninterpreted to StoreFPR, | |
1935 | and then set the state to fmt_uninterpreted. | |
1936 | (COP_SW): Temporarily set the state to fmt_word while calling | |
1937 | ValueFPR. | |
1938 | ||
1939 | Tue Feb 4 16:48:25 1997 Ian Lance Taylor <ian@cygnus.com> | |
1940 | ||
1941 | * gencode.c (build_instruction): The high order may be set in the | |
1942 | comparison flags at any ISA level, not just ISA 4. | |
1943 | ||
1944 | Tue Feb 4 13:33:30 1997 Doug Evans <dje@canuck.cygnus.com> | |
1945 | ||
1946 | * Makefile.in (@COMMON_MAKEFILE_FRAG): Use | |
1947 | COMMON_{PRE,POST}_CONFIG_FRAG instead. | |
1948 | * configure.in: sinclude ../common/aclocal.m4. | |
1949 | * configure: Regenerated. | |
1950 | ||
1951 | Fri Jan 31 11:11:45 1997 Ian Lance Taylor <ian@cygnus.com> | |
1952 | ||
1953 | * configure: Rebuild after change to aclocal.m4. | |
1954 | ||
1955 | Thu Jan 23 11:46:23 1997 Stu Grossman (grossman@critters.cygnus.com) | |
1956 | ||
1957 | * configure configure.in Makefile.in: Update to new configure | |
1958 | scheme which is more compatible with WinGDB builds. | |
1959 | * configure.in: Improve comment on how to run autoconf. | |
1960 | * configure: Re-run autoconf to get new ../common/aclocal.m4. | |
1961 | * Makefile.in: Use autoconf substitution to install common | |
1962 | makefile fragment. | |
1963 | ||
1964 | Wed Jan 8 12:39:03 1997 Jim Wilson <wilson@cygnus.com> | |
1965 | ||
1966 | * gencode.c (build_instruction): Use BigEndianCPU instead of | |
1967 | ByteSwapMem. | |
1968 | ||
1969 | Thu Jan 02 22:23:04 1997 Mark Alexander <marka@cygnus.com> | |
1970 | ||
1971 | * interp.c (sim_monitor): Make output to stdout visible in | |
1972 | wingdb's I/O log window. | |
1973 | ||
1974 | Tue Dec 31 07:04:00 1996 Mark Alexander <marka@cygnus.com> | |
1975 | ||
1976 | * support.h: Undo previous change to SIGTRAP | |
1977 | and SIGQUIT values. | |
1978 | ||
1979 | Mon Dec 30 17:36:06 1996 Ian Lance Taylor <ian@cygnus.com> | |
1980 | ||
1981 | * interp.c (store_word, load_word): New static functions. | |
1982 | (mips16_entry): New static function. | |
1983 | (SignalException): Look for mips16 entry and exit instructions. | |
1984 | (simulate): Use the correct index when setting fpr_state after | |
1985 | doing a pending move. | |
1986 | ||
1987 | Sun Dec 29 09:37:18 1996 Mark Alexander <marka@cygnus.com> | |
1988 | ||
1989 | * interp.c: Fix byte-swapping code throughout to work on | |
1990 | both little- and big-endian hosts. | |
1991 | ||
1992 | Sun Dec 29 09:18:32 1996 Mark Alexander <marka@cygnus.com> | |
1993 | ||
1994 | * support.h: Make definitions of SIGTRAP and SIGQUIT consistent | |
1995 | with gdb/config/i386/xm-windows.h. | |
1996 | ||
1997 | Fri Dec 27 22:48:51 1996 Mark Alexander <marka@cygnus.com> | |
1998 | ||
1999 | * gencode.c (build_instruction): Work around MSVC++ code gen bug | |
2000 | that messes up arithmetic shifts. | |
2001 | ||
2002 | Fri Dec 20 11:04:05 1996 Stu Grossman (grossman@critters.cygnus.com) | |
2003 | ||
2004 | * support.h: Use _WIN32 instead of __WIN32__. Also add defs for | |
2005 | SIGTRAP and SIGQUIT for _WIN32. | |
2006 | ||
2007 | Thu Dec 19 14:07:27 1996 Ian Lance Taylor <ian@cygnus.com> | |
2008 | ||
2009 | * gencode.c (build_instruction) [MUL]: Cast operands to word64, to | |
2010 | force a 64 bit multiplication. | |
2011 | (build_instruction) [OR]: In mips16 mode, don't do anything if the | |
2012 | destination register is 0, since that is the default mips16 nop | |
2013 | instruction. | |
2014 | ||
2015 | Mon Dec 16 14:59:38 1996 Ian Lance Taylor <ian@cygnus.com> | |
2016 | ||
2017 | * gencode.c (MIPS16_DECODE): SWRASP is I8, not RI. | |
2018 | (build_endian_shift): Don't check proc64. | |
2019 | (build_instruction): Always set memval to uword64. Cast op2 to | |
2020 | uword64 when shifting it left in memory instructions. Always use | |
2021 | the same code for stores--don't special case proc64. | |
2022 | ||
2023 | * gencode.c (build_mips16_operands): Fix base PC value for PC | |
2024 | relative operands. | |
2025 | (build_instruction): Call JALDELAYSLOT rather than DELAYSLOT for a | |
2026 | jal instruction. | |
2027 | * interp.c (simJALDELAYSLOT): Define. | |
2028 | (JALDELAYSLOT): Define. | |
2029 | (INDELAYSLOT, INJALDELAYSLOT): Define. | |
2030 | (simulate): Clear simJALDELAYSLOT when simDELAYSLOT is cleared. | |
2031 | ||
2032 | Tue Dec 24 22:11:20 1996 Angela Marie Thomas (angela@cygnus.com) | |
2033 | ||
2034 | * interp.c (sim_open): add flush_cache as a PMON routine | |
2035 | (sim_monitor): handle flush_cache by ignoring it | |
2036 | ||
2037 | Wed Dec 11 13:53:51 1996 Jim Wilson <wilson@cygnus.com> | |
2038 | ||
2039 | * gencode.c (build_instruction): Use !ByteSwapMem instead of | |
2040 | BigEndianMem. | |
2041 | * interp.c (CONFIG, config_EP_{mask,shift,D,DxxDxx, config_BE): Delete. | |
2042 | (BigEndianMem): Rename to ByteSwapMem and change sense. | |
2043 | (BigEndianCPU, sim_write, LoadMemory, StoreMemory): Change | |
2044 | BigEndianMem references to !ByteSwapMem. | |
2045 | (set_endianness): New function, with prototype. | |
2046 | (sim_open): Call set_endianness. | |
2047 | (sim_info): Use simBE instead of BigEndianMem. | |
2048 | (xfer_direct_word, xfer_direct_long, swap_direct_word, | |
2049 | swap_direct_long, xfer_big_word, xfer_big_long, xfer_little_word, | |
2050 | xfer_little_long, swap_word, swap_long): Delete unnecessary MSC_VER | |
2051 | ifdefs, keeping the prototype declaration. | |
2052 | (swap_word): Rewrite correctly. | |
2053 | (ColdReset): Delete references to CONFIG. Delete endianness related | |
2054 | code; moved to set_endianness. | |
2055 | ||
2056 | Tue Dec 10 11:32:04 1996 Jim Wilson <wilson@cygnus.com> | |
2057 | ||
2058 | * gencode.c (build_instruction, case JUMP): Truncate PC to 32 bits. | |
2059 | * interp.c (CHECKHILO): Define away. | |
2060 | (simSIGINT): New macro. | |
2061 | (membank_size): Increase from 1MB to 2MB. | |
2062 | (control_c): New function. | |
2063 | (sim_resume): Rename parameter signal to signal_number. Add local | |
2064 | variable prev. Call signal before and after simulate. | |
2065 | (sim_stop_reason): Add simSIGINT support. | |
2066 | (sim_warning, sim_error, dotrace, SignalException): Define as stdarg | |
2067 | functions always. | |
2068 | (sim_warning): Delete call to SignalException. Do call printf_filtered | |
2069 | if logfh is NULL. | |
2070 | (AddressTranslation): Add #ifdef DEBUG around debugging message and | |
2071 | a call to sim_warning. | |
2072 | ||
2073 | Wed Nov 27 11:53:50 1996 Ian Lance Taylor <ian@cygnus.com> | |
2074 | ||
2075 | * gencode.c (process_instructions): If ! proc64, skip DOUBLEWORD | |
2076 | 16 bit instructions. | |
2077 | ||
2078 | Tue Nov 26 11:53:12 1996 Ian Lance Taylor <ian@cygnus.com> | |
2079 | ||
2080 | Add support for mips16 (16 bit MIPS implementation): | |
2081 | * gencode.c (inst_type): Add mips16 instruction encoding types. | |
2082 | (GETDATASIZEINSN): Define. | |
2083 | (MIPS_DECODE): Add REG flag to dsllv, dsrav, and dsrlv. Add | |
2084 | jalx. Add LEFT flag to mfhi and mflo. Add RIGHT flag to mthi and | |
2085 | mtlo. | |
2086 | (MIPS16_DECODE): New table, for mips16 instructions. | |
2087 | (bitmap_val): New static function. | |
2088 | (struct mips16_op): Define. | |
2089 | (mips16_op_table): New table, for mips16 operands. | |
2090 | (build_mips16_operands): New static function. | |
2091 | (process_instructions): If PC is odd, decode a mips16 | |
2092 | instruction. Break out instruction handling into new | |
2093 | build_instruction function. | |
2094 | (build_instruction): New static function, broken out of | |
2095 | process_instructions. Check modifiers rather than flags for SHIFT | |
2096 | bit count and m[ft]{hi,lo} direction. | |
2097 | (usage): Pass program name to fprintf. | |
2098 | (main): Remove unused variable this_option_optind. Change | |
2099 | ``*loptarg++'' to ``loptarg++''. | |
2100 | (my_strtoul): Parenthesize && within ||. | |
2101 | * interp.c (LoadMemory): Accept a halfword pAddr if vAddr is odd. | |
2102 | (simulate): If PC is odd, fetch a 16 bit instruction, and | |
2103 | increment PC by 2 rather than 4. | |
2104 | * configure.in: Add case for mips16*-*-*. | |
2105 | * configure: Rebuild. | |
2106 | ||
2107 | Fri Nov 22 08:49:36 1996 Mark Alexander <marka@cygnus.com> | |
2108 | ||
2109 | * interp.c: Allow -t to enable tracing in standalone simulator. | |
2110 | Fix garbage output in trace file and error messages. | |
2111 | ||
2112 | Wed Nov 20 01:54:37 1996 Doug Evans <dje@canuck.cygnus.com> | |
2113 | ||
2114 | * Makefile.in: Delete stuff moved to ../common/Make-common.in. | |
2115 | (SIM_{OBJS,EXTRA_CFLAGS,EXTRA_CLEAN}): Define. | |
2116 | * configure.in: Simplify using macros in ../common/aclocal.m4. | |
2117 | * configure: Regenerated. | |
2118 | * tconfig.in: New file. | |
2119 | ||
2120 | Tue Nov 12 13:34:00 1996 Dawn Perchik <dawn@cygnus.com> | |
2121 | ||
2122 | * interp.c: Fix bugs in 64-bit port. | |
2123 | Use ansi function declarations for msvc compiler. | |
2124 | Initialize and test file pointer in trace code. | |
2125 | Prevent duplicate definition of LAST_EMED_REGNUM. | |
2126 | ||
2127 | Tue Oct 15 11:07:06 1996 Mark Alexander <marka@cygnus.com> | |
2128 | ||
2129 | * interp.c (xfer_big_long): Prevent unwanted sign extension. | |
2130 | ||
2131 | Thu Sep 26 17:35:00 1996 James G. Smith <jsmith@cygnus.co.uk> | |
2132 | ||
2133 | * interp.c (SignalException): Check for explicit terminating | |
2134 | breakpoint value. | |
2135 | * gencode.c: Pass instruction value through SignalException() | |
2136 | calls for Trap, Breakpoint and Syscall. | |
2137 | ||
2138 | Thu Sep 26 11:35:17 1996 James G. Smith <jsmith@cygnus.co.uk> | |
2139 | ||
2140 | * interp.c (SquareRoot): Add HAVE_SQRT check to ensure sqrt() is | |
2141 | only used on those hosts that provide it. | |
2142 | * configure.in: Add sqrt() to list of functions to be checked for. | |
2143 | * config.in: Re-generated. | |
2144 | * configure: Re-generated. | |
2145 | ||
2146 | Fri Sep 20 15:47:12 1996 Ian Lance Taylor <ian@cygnus.com> | |
2147 | ||
2148 | * gencode.c (process_instructions): Call build_endian_shift when | |
2149 | expanding STORE RIGHT, to fix swr. | |
2150 | * support.h (SIGNEXTEND): If the sign bit is not set, explicitly | |
2151 | clear the high bits. | |
2152 | * interp.c (Convert): Fix fmt_single to fmt_long to not truncate. | |
2153 | Fix float to int conversions to produce signed values. | |
2154 | ||
2155 | Thu Sep 19 15:34:17 1996 Ian Lance Taylor <ian@cygnus.com> | |
2156 | ||
2157 | * gencode.c (MIPS_DECODE): Set UNSIGNED for multu instruction. | |
2158 | (process_instructions): Correct handling of nor instruction. | |
2159 | Correct shift count for 32 bit shift instructions. Correct sign | |
2160 | extension for arithmetic shifts to not shift the number of bits in | |
2161 | the type. Fix 64 bit multiply high word calculation. Fix 32 bit | |
2162 | unsigned multiply. Fix ldxc1 and friends to use coprocessor 1. | |
2163 | Fix madd. | |
2164 | * interp.c (CHECKHILO): Don't set HIACCESS, LOACCESS, or HLPC. | |
2165 | It's OK to have a mult follow a mult. What's not OK is to have a | |
2166 | mult follow an mfhi. | |
2167 | (Convert): Comment out incorrect rounding code. | |
2168 | ||
2169 | Mon Sep 16 11:38:16 1996 James G. Smith <jsmith@cygnus.co.uk> | |
2170 | ||
2171 | * interp.c (sim_monitor): Improved monitor printf | |
2172 | simulation. Tidied up simulator warnings, and added "--log" option | |
2173 | for directing warning message output. | |
2174 | * gencode.c: Use sim_warning() rather than WARNING macro. | |
2175 | ||
2176 | Thu Aug 22 15:03:12 1996 Ian Lance Taylor <ian@cygnus.com> | |
2177 | ||
2178 | * Makefile.in (gencode): Depend upon gencode.o, getopt.o, and | |
2179 | getopt1.o, rather than on gencode.c. Link objects together. | |
2180 | Don't link against -liberty. | |
2181 | (gencode.o, getopt.o, getopt1.o): New targets. | |
2182 | * gencode.c: Include <ctype.h> and "ansidecl.h". | |
2183 | (AND): Undefine after including "ansidecl.h". | |
2184 | (ULONG_MAX): Define if not defined. | |
2185 | (OP_*): Don't define macros; now defined in opcode/mips.h. | |
2186 | (main): Call my_strtoul rather than strtoul. | |
2187 | (my_strtoul): New static function. | |
2188 | ||
2189 | Wed Jul 17 18:12:38 1996 Stu Grossman (grossman@critters.cygnus.com) | |
2190 | ||
2191 | * gencode.c (process_instructions): Generate word64 and uword64 | |
2192 | instead of `long long' and `unsigned long long' data types. | |
2193 | * interp.c: #include sysdep.h to get signals, and define default | |
2194 | for SIGBUS. | |
2195 | * (Convert): Work around for Visual-C++ compiler bug with type | |
2196 | conversion. | |
2197 | * support.h: Make things compile under Visual-C++ by using | |
2198 | __int64 instead of `long long'. Change many refs to long long | |
2199 | into word64/uword64 typedefs. | |
2200 | ||
2201 | Wed Jun 26 12:24:55 1996 Jason Molenda (crash@godzilla.cygnus.co.jp) | |
2202 | ||
2203 | * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir, | |
2204 | INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values. | |
2205 | (docdir): Removed. | |
2206 | * configure.in (AC_PREREQ): autoconf 2.5 or higher. | |
2207 | (AC_PROG_INSTALL): Added. | |
2208 | (AC_PROG_CC): Moved to before configure.host call. | |
2209 | * configure: Rebuilt. | |
2210 | ||
2211 | Wed Jun 5 08:28:13 1996 James G. Smith <jsmith@cygnus.co.uk> | |
2212 | ||
2213 | * configure.in: Define @SIMCONF@ depending on mips target. | |
2214 | * configure: Rebuild. | |
2215 | * Makefile.in (run): Add @SIMCONF@ to control simulator | |
2216 | construction. | |
2217 | * gencode.c: Change LOADDRMASK to 64bit memory model only. | |
2218 | * interp.c: Remove some debugging, provide more detailed error | |
2219 | messages, update memory accesses to use LOADDRMASK. | |
2220 | ||
2221 | Mon Jun 3 11:55:03 1996 Ian Lance Taylor <ian@cygnus.com> | |
2222 | ||
2223 | * configure.in: Add calls to AC_CONFIG_HEADER, AC_CHECK_HEADERS, | |
2224 | AC_CHECK_LIB, and AC_CHECK_FUNCS. Change AC_OUTPUT to set | |
2225 | stamp-h. | |
2226 | * configure: Rebuild. | |
2227 | * config.in: New file, generated by autoheader. | |
2228 | * interp.c: Include "config.h". Include <stdlib.h>, <string.h>, | |
2229 | and <strings.h> if they exist. Replace #ifdef sun with #ifdef | |
2230 | HAVE_ANINT and HAVE_AINT, as appropriate. | |
2231 | * Makefile.in (run): Use @LIBS@ rather than -lm. | |
2232 | (interp.o): Depend upon config.h. | |
2233 | (Makefile): Just rebuild Makefile. | |
2234 | (clean): Remove stamp-h. | |
2235 | (mostlyclean): Make the same as clean, not as distclean. | |
2236 | (config.h, stamp-h): New targets. | |
2237 | ||
2238 | Fri May 10 00:41:17 1996 James G. Smith <jsmith@cygnus.co.uk> | |
2239 | ||
2240 | * interp.c (ColdReset): Fix boolean test. Make all simulator | |
2241 | globals static. | |
2242 | ||
2243 | Wed May 8 15:12:58 1996 James G. Smith <jsmith@cygnus.co.uk> | |
2244 | ||
2245 | * interp.c (xfer_direct_word, xfer_direct_long, | |
2246 | swap_direct_word, swap_direct_long, xfer_big_word, | |
2247 | xfer_big_long, xfer_little_word, xfer_little_long, | |
2248 | swap_word,swap_long): Added. | |
2249 | * interp.c (ColdReset): Provide function indirection to | |
2250 | host<->simulated_target transfer routines. | |
2251 | * interp.c (sim_store_register, sim_fetch_register): Updated to | |
2252 | make use of indirected transfer routines. | |
2253 | ||
2254 | Fri Apr 19 15:48:24 1996 James G. Smith <jsmith@cygnus.co.uk> | |
2255 | ||
2256 | * gencode.c (process_instructions): Ensure FP ABS instruction | |
2257 | recognised. | |
2258 | * interp.c (AbsoluteValue): Add routine. Also provide simple PMON | |
2259 | system call support. | |
2260 | ||
2261 | Wed Apr 10 09:51:38 1996 James G. Smith <jsmith@cygnus.co.uk> | |
2262 | ||
2263 | * interp.c (sim_do_command): Complain if callback structure not | |
2264 | initialised. | |
2265 | ||
2266 | Thu Mar 28 13:50:51 1996 James G. Smith <jsmith@cygnus.co.uk> | |
2267 | ||
2268 | * interp.c (Convert): Provide round-to-nearest and round-to-zero | |
2269 | support for Sun hosts. | |
2270 | * Makefile.in (gencode): Ensure the host compiler and libraries | |
2271 | used for cross-hosted build. | |
2272 | ||
2273 | Wed Mar 27 14:42:12 1996 James G. Smith <jsmith@cygnus.co.uk> | |
2274 | ||
2275 | * interp.c, gencode.c: Some more (TODO) tidying. | |
2276 | ||
2277 | Thu Mar 7 11:19:33 1996 James G. Smith <jsmith@cygnus.co.uk> | |
2278 | ||
2279 | * gencode.c, interp.c: Replaced explicit long long references with | |
2280 | WORD64HI, WORD64LO, SET64HI and SET64LO macro calls. | |
2281 | * support.h (SET64LO, SET64HI): Macros added. | |
2282 | ||
2283 | Wed Feb 21 12:16:21 1996 Ian Lance Taylor <ian@cygnus.com> | |
2284 | ||
2285 | * configure: Regenerate with autoconf 2.7. | |
2286 | ||
2287 | Tue Jan 30 08:48:18 1996 Fred Fish <fnf@cygnus.com> | |
2288 | ||
2289 | * interp.c (LoadMemory): Enclose text following #endif in /* */. | |
2290 | * support.h: Remove superfluous "1" from #if. | |
2291 | * support.h (CHECKSIM): Remove stray 'a' at end of line. | |
2292 | ||
2293 | Mon Dec 4 11:44:40 1995 Jamie Smith <jsmith@cygnus.com> | |
2294 | ||
2295 | * interp.c (StoreFPR): Control UndefinedResult() call on | |
2296 | WARN_RESULT manifest. | |
2297 | ||
2298 | Fri Dec 1 16:37:19 1995 James G. Smith <jsmith@cygnus.co.uk> | |
2299 | ||
2300 | * gencode.c: Tidied instruction decoding, and added FP instruction | |
2301 | support. | |
2302 | ||
2303 | * interp.c: Added dineroIII, and BSD profiling support. Also | |
2304 | run-time FP handling. | |
2305 | ||
2306 | Sun Oct 22 00:57:18 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk> | |
2307 | ||
2308 | * Changelog, Makefile.in, README.Cygnus, configure, configure.in, | |
2309 | gencode.c, interp.c, support.h: created. |