Commit | Line | Data |
---|---|---|
c906108c SS |
1 | /*> interp.c <*/ |
2 | /* Simulator for the MIPS architecture. | |
3 | ||
4 | This file is part of the MIPS sim | |
5 | ||
6 | THIS SOFTWARE IS NOT COPYRIGHTED | |
7 | ||
8 | Cygnus offers the following for use in the public domain. Cygnus | |
9 | makes no warranty with regard to the software or it's performance | |
10 | and the user accepts the software "AS IS" with all faults. | |
11 | ||
12 | CYGNUS DISCLAIMS ANY WARRANTIES, EXPRESS OR IMPLIED, WITH REGARD TO | |
13 | THIS SOFTWARE INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF | |
14 | MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. | |
15 | ||
16 | $Revision$ | |
17 | $Date$ | |
18 | ||
19 | NOTEs: | |
20 | ||
21 | The IDT monitor (found on the VR4300 board), seems to lie about | |
22 | register contents. It seems to treat the registers as sign-extended | |
23 | 32-bit values. This cause *REAL* problems when single-stepping 64-bit | |
24 | code on the hardware. | |
25 | ||
26 | */ | |
27 | ||
28 | /* The TRACE manifests enable the provision of extra features. If they | |
29 | are not defined then a simpler (quicker) simulator is constructed | |
30 | without the required run-time checks, etc. */ | |
31 | #if 1 /* 0 to allow user build selection, 1 to force inclusion */ | |
32 | #define TRACE (1) | |
33 | #endif | |
34 | ||
35 | #include "bfd.h" | |
36 | #include "sim-main.h" | |
37 | #include "sim-utils.h" | |
38 | #include "sim-options.h" | |
39 | #include "sim-assert.h" | |
40 | #include "sim-hw.h" | |
41 | ||
42 | #include "itable.h" | |
43 | ||
44 | ||
45 | #include "config.h" | |
46 | ||
47 | #include <stdio.h> | |
48 | #include <stdarg.h> | |
49 | #include <ansidecl.h> | |
50 | #include <ctype.h> | |
51 | #include <limits.h> | |
52 | #include <math.h> | |
53 | #ifdef HAVE_STDLIB_H | |
54 | #include <stdlib.h> | |
55 | #endif | |
56 | #ifdef HAVE_STRING_H | |
57 | #include <string.h> | |
58 | #else | |
59 | #ifdef HAVE_STRINGS_H | |
60 | #include <strings.h> | |
61 | #endif | |
62 | #endif | |
63 | ||
64 | #include "getopt.h" | |
65 | #include "libiberty.h" | |
66 | #include "bfd.h" | |
67 | #include "callback.h" /* GDB simulator callback interface */ | |
68 | #include "remote-sim.h" /* GDB simulator interface */ | |
69 | ||
70 | #include "sysdep.h" | |
71 | ||
72 | #ifndef PARAMS | |
73 | #define PARAMS(x) | |
74 | #endif | |
75 | ||
76 | char* pr_addr PARAMS ((SIM_ADDR addr)); | |
77 | char* pr_uword64 PARAMS ((uword64 addr)); | |
78 | ||
79 | ||
80 | /* Within interp.c we refer to the sim_state and sim_cpu directly. */ | |
81 | #define CPU cpu | |
82 | #define SD sd | |
83 | ||
84 | ||
85 | /* The following reserved instruction value is used when a simulator | |
86 | trap is required. NOTE: Care must be taken, since this value may be | |
87 | used in later revisions of the MIPS ISA. */ | |
88 | ||
89 | #define RSVD_INSTRUCTION (0x00000005) | |
90 | #define RSVD_INSTRUCTION_MASK (0xFC00003F) | |
91 | ||
92 | #define RSVD_INSTRUCTION_ARG_SHIFT 6 | |
93 | #define RSVD_INSTRUCTION_ARG_MASK 0xFFFFF | |
94 | ||
95 | ||
96 | /* Bits in the Debug register */ | |
97 | #define Debug_DBD 0x80000000 /* Debug Branch Delay */ | |
98 | #define Debug_DM 0x40000000 /* Debug Mode */ | |
99 | #define Debug_DBp 0x00000002 /* Debug Breakpoint indicator */ | |
100 | ||
101 | /*---------------------------------------------------------------------------*/ | |
102 | /*-- GDB simulator interface ------------------------------------------------*/ | |
103 | /*---------------------------------------------------------------------------*/ | |
104 | ||
105 | static void ColdReset PARAMS((SIM_DESC sd)); | |
106 | ||
107 | /*---------------------------------------------------------------------------*/ | |
108 | ||
109 | ||
110 | ||
111 | #define DELAYSLOT() {\ | |
112 | if (STATE & simDELAYSLOT)\ | |
113 | sim_io_eprintf(sd,"Delay slot already activated (branch in delay slot?)\n");\ | |
114 | STATE |= simDELAYSLOT;\ | |
115 | } | |
116 | ||
117 | #define JALDELAYSLOT() {\ | |
118 | DELAYSLOT ();\ | |
119 | STATE |= simJALDELAYSLOT;\ | |
120 | } | |
121 | ||
122 | #define NULLIFY() {\ | |
123 | STATE &= ~simDELAYSLOT;\ | |
124 | STATE |= simSKIPNEXT;\ | |
125 | } | |
126 | ||
127 | #define CANCELDELAYSLOT() {\ | |
128 | DSSTATE = 0;\ | |
129 | STATE &= ~(simDELAYSLOT | simJALDELAYSLOT);\ | |
130 | } | |
131 | ||
132 | #define INDELAYSLOT() ((STATE & simDELAYSLOT) != 0) | |
133 | #define INJALDELAYSLOT() ((STATE & simJALDELAYSLOT) != 0) | |
134 | ||
adf40b2e JM |
135 | /* Note that the monitor code essentially assumes this layout of memory. |
136 | If you change these, change the monitor code, too. */ | |
c906108c SS |
137 | #define K0BASE (0x80000000) |
138 | #define K0SIZE (0x20000000) | |
139 | #define K1BASE (0xA0000000) | |
140 | #define K1SIZE (0x20000000) | |
adf40b2e JM |
141 | |
142 | /* Simple run-time monitor support. | |
143 | ||
144 | We emulate the monitor by placing magic reserved instructions at | |
145 | the monitor's entry points; when we hit these instructions, instead | |
146 | of raising an exception (as we would normally), we look at the | |
147 | instruction and perform the appropriate monitory operation. | |
148 | ||
149 | `*_monitor_base' are the physical addresses at which the corresponding | |
150 | monitor vectors are located. `0' means none. By default, | |
151 | install all three. | |
152 | The RSVD_INSTRUCTION... macros specify the magic instructions we | |
153 | use at the monitor entry points. */ | |
154 | static int firmware_option_p = 0; | |
155 | static SIM_ADDR idt_monitor_base = 0xBFC00000; | |
156 | static SIM_ADDR pmon_monitor_base = 0xBFC00500; | |
157 | static SIM_ADDR lsipmon_monitor_base = 0xBFC00200; | |
158 | ||
159 | static SIM_RC sim_firmware_command (SIM_DESC sd, char* arg); | |
160 | ||
161 | ||
c906108c SS |
162 | #define MEM_SIZE (2 << 20) |
163 | ||
164 | ||
165 | #if defined(TRACE) | |
166 | static char *tracefile = "trace.din"; /* default filename for trace log */ | |
167 | FILE *tracefh = NULL; | |
168 | static void open_trace PARAMS((SIM_DESC sd)); | |
169 | #endif /* TRACE */ | |
170 | ||
171 | static const char * get_insn_name (sim_cpu *, int); | |
172 | ||
173 | /* simulation target board. NULL=canonical */ | |
174 | static char* board = NULL; | |
175 | ||
176 | ||
177 | static DECLARE_OPTION_HANDLER (mips_option_handler); | |
178 | ||
179 | enum { | |
180 | OPTION_DINERO_TRACE = OPTION_START, | |
181 | OPTION_DINERO_FILE, | |
adf40b2e | 182 | OPTION_FIRMWARE, |
c906108c SS |
183 | OPTION_BOARD |
184 | }; | |
185 | ||
186 | ||
187 | static SIM_RC | |
188 | mips_option_handler (sd, cpu, opt, arg, is_command) | |
189 | SIM_DESC sd; | |
190 | sim_cpu *cpu; | |
191 | int opt; | |
192 | char *arg; | |
193 | int is_command; | |
194 | { | |
195 | int cpu_nr; | |
196 | switch (opt) | |
197 | { | |
198 | case OPTION_DINERO_TRACE: /* ??? */ | |
199 | #if defined(TRACE) | |
200 | /* Eventually the simTRACE flag could be treated as a toggle, to | |
201 | allow external control of the program points being traced | |
202 | (i.e. only from main onwards, excluding the run-time setup, | |
203 | etc.). */ | |
204 | for (cpu_nr = 0; cpu_nr < MAX_NR_PROCESSORS; cpu_nr++) | |
205 | { | |
206 | sim_cpu *cpu = STATE_CPU (sd, cpu_nr); | |
207 | if (arg == NULL) | |
208 | STATE |= simTRACE; | |
209 | else if (strcmp (arg, "yes") == 0) | |
210 | STATE |= simTRACE; | |
211 | else if (strcmp (arg, "no") == 0) | |
212 | STATE &= ~simTRACE; | |
213 | else if (strcmp (arg, "on") == 0) | |
214 | STATE |= simTRACE; | |
215 | else if (strcmp (arg, "off") == 0) | |
216 | STATE &= ~simTRACE; | |
217 | else | |
218 | { | |
219 | fprintf (stderr, "Unrecognized dinero-trace option `%s'\n", arg); | |
220 | return SIM_RC_FAIL; | |
221 | } | |
222 | } | |
223 | return SIM_RC_OK; | |
224 | #else /* !TRACE */ | |
225 | fprintf(stderr,"\ | |
226 | Simulator constructed without dinero tracing support (for performance).\n\ | |
227 | Re-compile simulator with \"-DTRACE\" to enable this option.\n"); | |
228 | return SIM_RC_FAIL; | |
229 | #endif /* !TRACE */ | |
230 | ||
231 | case OPTION_DINERO_FILE: | |
232 | #if defined(TRACE) | |
233 | if (optarg != NULL) { | |
234 | char *tmp; | |
235 | tmp = (char *)malloc(strlen(optarg) + 1); | |
236 | if (tmp == NULL) | |
237 | { | |
238 | sim_io_printf(sd,"Failed to allocate buffer for tracefile name \"%s\"\n",optarg); | |
239 | return SIM_RC_FAIL; | |
240 | } | |
241 | else { | |
242 | strcpy(tmp,optarg); | |
243 | tracefile = tmp; | |
244 | sim_io_printf(sd,"Placing trace information into file \"%s\"\n",tracefile); | |
245 | } | |
246 | } | |
247 | #endif /* TRACE */ | |
248 | return SIM_RC_OK; | |
249 | ||
adf40b2e JM |
250 | case OPTION_FIRMWARE: |
251 | return sim_firmware_command (sd, arg); | |
252 | ||
c906108c SS |
253 | case OPTION_BOARD: |
254 | { | |
255 | if (arg) | |
256 | { | |
257 | board = zalloc(strlen(arg) + 1); | |
258 | strcpy(board, arg); | |
259 | } | |
260 | return SIM_RC_OK; | |
261 | } | |
262 | } | |
263 | ||
264 | return SIM_RC_OK; | |
265 | } | |
266 | ||
267 | ||
268 | static const OPTION mips_options[] = | |
269 | { | |
270 | { {"dinero-trace", optional_argument, NULL, OPTION_DINERO_TRACE}, | |
271 | '\0', "on|off", "Enable dinero tracing", | |
272 | mips_option_handler }, | |
273 | { {"dinero-file", required_argument, NULL, OPTION_DINERO_FILE}, | |
274 | '\0', "FILE", "Write dinero trace to FILE", | |
275 | mips_option_handler }, | |
adf40b2e JM |
276 | { {"firmware", required_argument, NULL, OPTION_FIRMWARE}, |
277 | '\0', "[idt|pmon|lsipmon|none][@ADDRESS]", "Emulate ROM monitor", | |
278 | mips_option_handler }, | |
c906108c SS |
279 | { {"board", required_argument, NULL, OPTION_BOARD}, |
280 | '\0', "none" /* rely on compile-time string concatenation for other options */ | |
281 | ||
282 | #define BOARD_JMR3904 "jmr3904" | |
283 | "|" BOARD_JMR3904 | |
284 | #define BOARD_JMR3904_PAL "jmr3904pal" | |
285 | "|" BOARD_JMR3904_PAL | |
286 | #define BOARD_JMR3904_DEBUG "jmr3904debug" | |
287 | "|" BOARD_JMR3904_DEBUG | |
43e526b9 JM |
288 | #define BOARD_BSP "bsp" |
289 | "|" BOARD_BSP | |
c906108c SS |
290 | |
291 | , "Customize simulation for a particular board.", mips_option_handler }, | |
292 | ||
293 | { {NULL, no_argument, NULL, 0}, '\0', NULL, NULL, NULL } | |
294 | }; | |
295 | ||
296 | ||
297 | int interrupt_pending; | |
298 | ||
299 | void | |
300 | interrupt_event (SIM_DESC sd, void *data) | |
301 | { | |
302 | sim_cpu *cpu = STATE_CPU (sd, 0); /* FIXME */ | |
303 | address_word cia = CIA_GET (cpu); | |
304 | if (SR & status_IE) | |
305 | { | |
306 | interrupt_pending = 0; | |
307 | SignalExceptionInterrupt (1); /* interrupt "1" */ | |
308 | } | |
309 | else if (!interrupt_pending) | |
310 | sim_events_schedule (sd, 1, interrupt_event, data); | |
311 | } | |
312 | ||
313 | ||
314 | /*---------------------------------------------------------------------------*/ | |
315 | /*-- Device registration hook -----------------------------------------------*/ | |
316 | /*---------------------------------------------------------------------------*/ | |
317 | static void device_init(SIM_DESC sd) { | |
318 | #ifdef DEVICE_INIT | |
319 | extern void register_devices(SIM_DESC); | |
320 | register_devices(sd); | |
321 | #endif | |
322 | } | |
323 | ||
324 | /*---------------------------------------------------------------------------*/ | |
325 | /*-- GDB simulator interface ------------------------------------------------*/ | |
326 | /*---------------------------------------------------------------------------*/ | |
327 | ||
328 | SIM_DESC | |
329 | sim_open (kind, cb, abfd, argv) | |
330 | SIM_OPEN_KIND kind; | |
331 | host_callback *cb; | |
332 | struct _bfd *abfd; | |
333 | char **argv; | |
334 | { | |
335 | SIM_DESC sd = sim_state_alloc (kind, cb); | |
336 | sim_cpu *cpu = STATE_CPU (sd, 0); /* FIXME */ | |
337 | ||
338 | SIM_ASSERT (STATE_MAGIC (sd) == SIM_MAGIC_NUMBER); | |
339 | ||
340 | /* FIXME: watchpoints code shouldn't need this */ | |
341 | STATE_WATCHPOINTS (sd)->pc = &(PC); | |
342 | STATE_WATCHPOINTS (sd)->sizeof_pc = sizeof (PC); | |
343 | STATE_WATCHPOINTS (sd)->interrupt_handler = interrupt_event; | |
344 | ||
345 | /* Initialize the mechanism for doing insn profiling. */ | |
346 | CPU_INSN_NAME (cpu) = get_insn_name; | |
347 | CPU_MAX_INSNS (cpu) = nr_itable_entries; | |
348 | ||
349 | STATE = 0; | |
350 | ||
351 | if (sim_pre_argv_init (sd, argv[0]) != SIM_RC_OK) | |
352 | return 0; | |
353 | sim_add_option_table (sd, NULL, mips_options); | |
354 | ||
355 | ||
356 | /* getopt will print the error message so we just have to exit if this fails. | |
357 | FIXME: Hmmm... in the case of gdb we need getopt to call | |
358 | print_filtered. */ | |
359 | if (sim_parse_args (sd, argv) != SIM_RC_OK) | |
360 | { | |
361 | /* Uninstall the modules to avoid memory leaks, | |
362 | file descriptor leaks, etc. */ | |
363 | sim_module_uninstall (sd); | |
364 | return 0; | |
365 | } | |
366 | ||
367 | /* handle board-specific memory maps */ | |
368 | if (board == NULL) | |
369 | { | |
370 | /* Allocate core managed memory */ | |
371 | ||
adf40b2e | 372 | |
c906108c SS |
373 | /* For compatibility with the old code - under this (at level one) |
374 | are the kernel spaces K0 & K1. Both of these map to a single | |
375 | smaller sub region */ | |
376 | sim_do_command(sd," memory region 0x7fff8000,0x8000") ; /* MTZ- 32 k stack */ | |
377 | sim_do_commandf (sd, "memory alias 0x%lx@1,0x%lx%%0x%lx,0x%0x", | |
378 | K1BASE, K0SIZE, | |
379 | MEM_SIZE, /* actual size */ | |
380 | K0BASE); | |
381 | ||
382 | device_init(sd); | |
383 | } | |
43e526b9 JM |
384 | else if (board != NULL |
385 | && (strcmp(board, BOARD_BSP) == 0)) | |
386 | { | |
387 | int i; | |
388 | ||
389 | STATE_ENVIRONMENT (sd) = OPERATING_ENVIRONMENT; | |
390 | ||
391 | /* ROM: 0x9FC0_0000 - 0x9FFF_FFFF and 0xBFC0_0000 - 0xBFFF_FFFF */ | |
392 | sim_do_commandf (sd, "memory alias 0x%lx@1,0x%lx,0x%0x", | |
393 | 0x9FC00000, | |
394 | 4 * 1024 * 1024, /* 4 MB */ | |
395 | 0xBFC00000); | |
396 | ||
397 | /* SRAM: 0x8000_0000 - 0x803F_FFFF and 0xA000_0000 - 0xA03F_FFFF */ | |
398 | sim_do_commandf (sd, "memory alias 0x%lx@1,0x%lx,0x%0x", | |
399 | 0x80000000, | |
400 | 4 * 1024 * 1024, /* 4 MB */ | |
401 | 0xA0000000); | |
402 | ||
403 | /* DRAM: 0x8800_0000 - 0x89FF_FFFF and 0xA800_0000 - 0xA9FF_FFFF */ | |
404 | for (i=0; i<8; i++) /* 32 MB total */ | |
405 | { | |
406 | unsigned size = 4 * 1024 * 1024; /* 4 MB */ | |
407 | sim_do_commandf (sd, "memory alias 0x%lx@1,0x%lx,0x%0x", | |
408 | 0x88000000 + (i * size), | |
409 | size, | |
410 | 0xA8000000 + (i * size)); | |
411 | } | |
412 | } | |
c906108c | 413 | #if (WITH_HW) |
43e526b9 JM |
414 | else if (board != NULL |
415 | && (strcmp(board, BOARD_JMR3904) == 0 || | |
416 | strcmp(board, BOARD_JMR3904_PAL) == 0 || | |
417 | strcmp(board, BOARD_JMR3904_DEBUG) == 0)) | |
c906108c SS |
418 | { |
419 | /* match VIRTUAL memory layout of JMR-TX3904 board */ | |
420 | int i; | |
421 | ||
adf40b2e JM |
422 | /* --- disable monitor unless forced on by user --- */ |
423 | ||
424 | if (! firmware_option_p) | |
425 | { | |
426 | idt_monitor_base = 0; | |
427 | pmon_monitor_base = 0; | |
428 | lsipmon_monitor_base = 0; | |
429 | } | |
430 | ||
c906108c SS |
431 | /* --- environment --- */ |
432 | ||
433 | STATE_ENVIRONMENT (sd) = OPERATING_ENVIRONMENT; | |
434 | ||
435 | /* --- memory --- */ | |
436 | ||
437 | /* ROM: 0x9FC0_0000 - 0x9FFF_FFFF and 0xBFC0_0000 - 0xBFFF_FFFF */ | |
438 | sim_do_commandf (sd, "memory alias 0x%lx@1,0x%lx,0x%0x", | |
439 | 0x9FC00000, | |
440 | 4 * 1024 * 1024, /* 4 MB */ | |
441 | 0xBFC00000); | |
442 | ||
443 | /* SRAM: 0x8000_0000 - 0x803F_FFFF and 0xA000_0000 - 0xA03F_FFFF */ | |
444 | sim_do_commandf (sd, "memory alias 0x%lx@1,0x%lx,0x%0x", | |
445 | 0x80000000, | |
446 | 4 * 1024 * 1024, /* 4 MB */ | |
447 | 0xA0000000); | |
448 | ||
449 | /* DRAM: 0x8800_0000 - 0x89FF_FFFF and 0xA800_0000 - 0xA9FF_FFFF */ | |
450 | for (i=0; i<8; i++) /* 32 MB total */ | |
451 | { | |
452 | unsigned size = 4 * 1024 * 1024; /* 4 MB */ | |
453 | sim_do_commandf (sd, "memory alias 0x%lx@1,0x%lx,0x%0x", | |
454 | 0x88000000 + (i * size), | |
455 | size, | |
456 | 0xA8000000 + (i * size)); | |
457 | } | |
458 | ||
cb7450ea | 459 | /* Dummy memory regions for unsimulated devices - sorted by address */ |
c906108c | 460 | |
d4f3574e | 461 | sim_do_commandf (sd, "memory alias 0x%lx@1,0x%lx", 0xB1000000, 0x400); /* ISA I/O */ |
c2d11a7d JM |
462 | sim_do_commandf (sd, "memory alias 0x%lx@1,0x%lx", 0xB2100000, 0x004); /* ISA ctl */ |
463 | sim_do_commandf (sd, "memory alias 0x%lx@1,0x%lx", 0xB2500000, 0x004); /* LED/switch */ | |
d4f3574e SS |
464 | sim_do_commandf (sd, "memory alias 0x%lx@1,0x%lx", 0xB2700000, 0x004); /* RTC */ |
465 | sim_do_commandf (sd, "memory alias 0x%lx@1,0x%lx", 0xB3C00000, 0x004); /* RTC */ | |
cb7450ea FCE |
466 | sim_do_commandf (sd, "memory alias 0x%lx@1,0x%lx", 0xFFFF8000, 0x900); /* DRAMC */ |
467 | sim_do_commandf (sd, "memory alias 0x%lx@1,0x%lx", 0xFFFF9000, 0x200); /* EBIF */ | |
468 | sim_do_commandf (sd, "memory alias 0x%lx@1,0x%lx", 0xFFFFE000, 0x01c); /* EBIF */ | |
469 | sim_do_commandf (sd, "memory alias 0x%lx@1,0x%lx", 0xFFFFF500, 0x300); /* PIO */ | |
470 | ||
c906108c SS |
471 | |
472 | /* --- simulated devices --- */ | |
473 | sim_hw_parse (sd, "/tx3904irc@0xffffc000/reg 0xffffc000 0x20"); | |
474 | sim_hw_parse (sd, "/tx3904cpu"); | |
475 | sim_hw_parse (sd, "/tx3904tmr@0xfffff000/reg 0xfffff000 0x100"); | |
476 | sim_hw_parse (sd, "/tx3904tmr@0xfffff100/reg 0xfffff100 0x100"); | |
477 | sim_hw_parse (sd, "/tx3904tmr@0xfffff200/reg 0xfffff200 0x100"); | |
478 | sim_hw_parse (sd, "/tx3904sio@0xfffff300/reg 0xfffff300 0x100"); | |
479 | { | |
480 | /* FIXME: poking at dv-sockser internals, use tcp backend if | |
481 | --sockser_addr option was given.*/ | |
482 | extern char* sockser_addr; | |
483 | if(sockser_addr == NULL) | |
484 | sim_hw_parse (sd, "/tx3904sio@0xfffff300/backend stdio"); | |
485 | else | |
486 | sim_hw_parse (sd, "/tx3904sio@0xfffff300/backend tcp"); | |
487 | } | |
488 | sim_hw_parse (sd, "/tx3904sio@0xfffff400/reg 0xfffff400 0x100"); | |
489 | sim_hw_parse (sd, "/tx3904sio@0xfffff400/backend stdio"); | |
490 | ||
491 | /* -- device connections --- */ | |
492 | sim_hw_parse (sd, "/tx3904irc > ip level /tx3904cpu"); | |
493 | sim_hw_parse (sd, "/tx3904tmr@0xfffff000 > int tmr0 /tx3904irc"); | |
494 | sim_hw_parse (sd, "/tx3904tmr@0xfffff100 > int tmr1 /tx3904irc"); | |
495 | sim_hw_parse (sd, "/tx3904tmr@0xfffff200 > int tmr2 /tx3904irc"); | |
496 | sim_hw_parse (sd, "/tx3904sio@0xfffff300 > int sio0 /tx3904irc"); | |
497 | sim_hw_parse (sd, "/tx3904sio@0xfffff400 > int sio1 /tx3904irc"); | |
498 | ||
499 | /* add PAL timer & I/O module */ | |
500 | if(! strcmp(board, BOARD_JMR3904_PAL)) | |
501 | { | |
502 | /* the device */ | |
503 | sim_hw_parse (sd, "/pal@0xffff0000"); | |
504 | sim_hw_parse (sd, "/pal@0xffff0000/reg 0xffff0000 64"); | |
505 | ||
506 | /* wire up interrupt ports to irc */ | |
507 | sim_hw_parse (sd, "/pal@0x31000000 > countdown tmr0 /tx3904irc"); | |
508 | sim_hw_parse (sd, "/pal@0x31000000 > timer tmr1 /tx3904irc"); | |
509 | sim_hw_parse (sd, "/pal@0x31000000 > int int0 /tx3904irc"); | |
510 | } | |
511 | ||
512 | if(! strcmp(board, BOARD_JMR3904_DEBUG)) | |
513 | { | |
514 | /* -- DEBUG: glue interrupt generators --- */ | |
515 | sim_hw_parse (sd, "/glue@0xffff0000/reg 0xffff0000 0x50"); | |
516 | sim_hw_parse (sd, "/glue@0xffff0000 > int0 int0 /tx3904irc"); | |
517 | sim_hw_parse (sd, "/glue@0xffff0000 > int1 int1 /tx3904irc"); | |
518 | sim_hw_parse (sd, "/glue@0xffff0000 > int2 int2 /tx3904irc"); | |
519 | sim_hw_parse (sd, "/glue@0xffff0000 > int3 int3 /tx3904irc"); | |
520 | sim_hw_parse (sd, "/glue@0xffff0000 > int4 int4 /tx3904irc"); | |
521 | sim_hw_parse (sd, "/glue@0xffff0000 > int5 int5 /tx3904irc"); | |
522 | sim_hw_parse (sd, "/glue@0xffff0000 > int6 int6 /tx3904irc"); | |
523 | sim_hw_parse (sd, "/glue@0xffff0000 > int7 int7 /tx3904irc"); | |
524 | sim_hw_parse (sd, "/glue@0xffff0000 > int8 dmac0 /tx3904irc"); | |
525 | sim_hw_parse (sd, "/glue@0xffff0000 > int9 dmac1 /tx3904irc"); | |
526 | sim_hw_parse (sd, "/glue@0xffff0000 > int10 dmac2 /tx3904irc"); | |
527 | sim_hw_parse (sd, "/glue@0xffff0000 > int11 dmac3 /tx3904irc"); | |
528 | sim_hw_parse (sd, "/glue@0xffff0000 > int12 sio0 /tx3904irc"); | |
529 | sim_hw_parse (sd, "/glue@0xffff0000 > int13 sio1 /tx3904irc"); | |
530 | sim_hw_parse (sd, "/glue@0xffff0000 > int14 tmr0 /tx3904irc"); | |
531 | sim_hw_parse (sd, "/glue@0xffff0000 > int15 tmr1 /tx3904irc"); | |
532 | sim_hw_parse (sd, "/glue@0xffff0000 > int16 tmr2 /tx3904irc"); | |
533 | sim_hw_parse (sd, "/glue@0xffff0000 > int17 nmi /tx3904cpu"); | |
534 | } | |
535 | ||
536 | device_init(sd); | |
537 | } | |
538 | #endif | |
539 | ||
540 | ||
541 | /* check for/establish the a reference program image */ | |
542 | if (sim_analyze_program (sd, | |
543 | (STATE_PROG_ARGV (sd) != NULL | |
544 | ? *STATE_PROG_ARGV (sd) | |
545 | : NULL), | |
546 | abfd) != SIM_RC_OK) | |
547 | { | |
548 | sim_module_uninstall (sd); | |
549 | return 0; | |
550 | } | |
551 | ||
552 | /* Configure/verify the target byte order and other runtime | |
553 | configuration options */ | |
554 | if (sim_config (sd) != SIM_RC_OK) | |
555 | { | |
556 | sim_module_uninstall (sd); | |
557 | return 0; | |
558 | } | |
559 | ||
560 | if (sim_post_argv_init (sd) != SIM_RC_OK) | |
561 | { | |
562 | /* Uninstall the modules to avoid memory leaks, | |
563 | file descriptor leaks, etc. */ | |
564 | sim_module_uninstall (sd); | |
565 | return 0; | |
566 | } | |
567 | ||
568 | /* verify assumptions the simulator made about the host type system. | |
569 | This macro does not return if there is a problem */ | |
570 | SIM_ASSERT (sizeof(int) == (4 * sizeof(char))); | |
571 | SIM_ASSERT (sizeof(word64) == (8 * sizeof(char))); | |
572 | ||
573 | /* This is NASTY, in that we are assuming the size of specific | |
574 | registers: */ | |
575 | { | |
576 | int rn; | |
577 | for (rn = 0; (rn < (LAST_EMBED_REGNUM + 1)); rn++) | |
578 | { | |
579 | if (rn < 32) | |
580 | cpu->register_widths[rn] = WITH_TARGET_WORD_BITSIZE; | |
581 | else if ((rn >= FGRIDX) && (rn < (FGRIDX + NR_FGR))) | |
582 | cpu->register_widths[rn] = WITH_TARGET_FLOATING_POINT_BITSIZE; | |
583 | else if ((rn >= 33) && (rn <= 37)) | |
584 | cpu->register_widths[rn] = WITH_TARGET_WORD_BITSIZE; | |
585 | else if ((rn == SRIDX) | |
586 | || (rn == FCR0IDX) | |
587 | || (rn == FCR31IDX) | |
588 | || ((rn >= 72) && (rn <= 89))) | |
589 | cpu->register_widths[rn] = 32; | |
590 | else | |
591 | cpu->register_widths[rn] = 0; | |
592 | } | |
593 | ||
594 | ||
595 | } | |
596 | ||
597 | #if defined(TRACE) | |
598 | if (STATE & simTRACE) | |
599 | open_trace(sd); | |
600 | #endif /* TRACE */ | |
601 | ||
adf40b2e JM |
602 | /* |
603 | sim_io_eprintf (sd, "idt@%x pmon@%x lsipmon@%x\n", | |
604 | idt_monitor_base, | |
605 | pmon_monitor_base, | |
606 | lsipmon_monitor_base); | |
607 | */ | |
c906108c SS |
608 | |
609 | /* Write the monitor trap address handlers into the monitor (eeprom) | |
610 | address space. This can only be done once the target endianness | |
611 | has been determined. */ | |
adf40b2e JM |
612 | if (idt_monitor_base != 0) |
613 | { | |
614 | unsigned loop; | |
615 | unsigned idt_monitor_size = 1 << 11; | |
616 | ||
617 | /* the default monitor region */ | |
618 | sim_do_commandf (sd, "memory region 0x%x,0x%x", | |
619 | idt_monitor_base, idt_monitor_size); | |
620 | ||
621 | /* Entry into the IDT monitor is via fixed address vectors, and | |
622 | not using machine instructions. To avoid clashing with use of | |
623 | the MIPS TRAP system, we place our own (simulator specific) | |
624 | "undefined" instructions into the relevant vector slots. */ | |
625 | for (loop = 0; (loop < idt_monitor_size); loop += 4) | |
626 | { | |
627 | address_word vaddr = (idt_monitor_base + loop); | |
628 | unsigned32 insn = (RSVD_INSTRUCTION | | |
629 | (((loop >> 2) & RSVD_INSTRUCTION_ARG_MASK) | |
630 | << RSVD_INSTRUCTION_ARG_SHIFT)); | |
631 | H2T (insn); | |
632 | sim_write (sd, vaddr, (char *)&insn, sizeof (insn)); | |
633 | } | |
634 | } | |
635 | ||
636 | if ((pmon_monitor_base != 0) || (lsipmon_monitor_base != 0)) | |
637 | { | |
c906108c SS |
638 | /* The PMON monitor uses the same address space, but rather than |
639 | branching into it the address of a routine is loaded. We can | |
640 | cheat for the moment, and direct the PMON routine to IDT style | |
641 | instructions within the monitor space. This relies on the IDT | |
642 | monitor not using the locations from 0xBFC00500 onwards as its | |
643 | entry points.*/ | |
adf40b2e JM |
644 | unsigned loop; |
645 | for (loop = 0; (loop < 24); loop++) | |
646 | { | |
647 | unsigned32 value = ((0x500 - 8) / 8); /* default UNDEFINED reason code */ | |
648 | switch (loop) | |
649 | { | |
c906108c SS |
650 | case 0: /* read */ |
651 | value = 7; | |
652 | break; | |
653 | case 1: /* write */ | |
654 | value = 8; | |
655 | break; | |
656 | case 2: /* open */ | |
657 | value = 6; | |
658 | break; | |
659 | case 3: /* close */ | |
660 | value = 10; | |
661 | break; | |
662 | case 5: /* printf */ | |
663 | value = ((0x500 - 16) / 8); /* not an IDT reason code */ | |
664 | break; | |
665 | case 8: /* cliexit */ | |
666 | value = 17; | |
667 | break; | |
668 | case 11: /* flush_cache */ | |
669 | value = 28; | |
670 | break; | |
671 | } | |
adf40b2e JM |
672 | |
673 | SIM_ASSERT (idt_monitor_base != 0); | |
674 | value = ((unsigned int) idt_monitor_base + (value * 8)); | |
c906108c | 675 | H2T (value); |
c906108c | 676 | |
adf40b2e JM |
677 | if (pmon_monitor_base != 0) |
678 | { | |
679 | address_word vaddr = (pmon_monitor_base + (loop * 4)); | |
680 | sim_write (sd, vaddr, (char *)&value, sizeof (value)); | |
681 | } | |
682 | ||
683 | if (lsipmon_monitor_base != 0) | |
684 | { | |
685 | address_word vaddr = (lsipmon_monitor_base + (loop * 4)); | |
686 | sim_write (sd, vaddr, (char *)&value, sizeof (value)); | |
687 | } | |
c906108c | 688 | } |
adf40b2e JM |
689 | |
690 | /* Write an abort sequence into the TRAP (common) exception vector | |
691 | addresses. This is to catch code executing a TRAP (et.al.) | |
692 | instruction without installing a trap handler. */ | |
693 | if ((idt_monitor_base != 0) || | |
694 | (pmon_monitor_base != 0) || | |
695 | (lsipmon_monitor_base != 0)) | |
696 | { | |
697 | unsigned32 halt[2] = { 0x2404002f /* addiu r4, r0, 47 */, | |
698 | HALT_INSTRUCTION /* BREAK */ }; | |
699 | H2T (halt[0]); | |
700 | H2T (halt[1]); | |
701 | sim_write (sd, 0x80000000, (char *) halt, sizeof (halt)); | |
702 | sim_write (sd, 0x80000180, (char *) halt, sizeof (halt)); | |
703 | sim_write (sd, 0x80000200, (char *) halt, sizeof (halt)); | |
704 | /* XXX: Write here unconditionally? */ | |
705 | sim_write (sd, 0xBFC00200, (char *) halt, sizeof (halt)); | |
706 | sim_write (sd, 0xBFC00380, (char *) halt, sizeof (halt)); | |
707 | sim_write (sd, 0xBFC00400, (char *) halt, sizeof (halt)); | |
708 | } | |
c906108c SS |
709 | } |
710 | ||
711 | ||
712 | ||
713 | return sd; | |
714 | } | |
715 | ||
716 | #if defined(TRACE) | |
717 | static void | |
718 | open_trace(sd) | |
719 | SIM_DESC sd; | |
720 | { | |
721 | tracefh = fopen(tracefile,"wb+"); | |
722 | if (tracefh == NULL) | |
723 | { | |
724 | sim_io_eprintf(sd,"Failed to create file \"%s\", writing trace information to stderr.\n",tracefile); | |
725 | tracefh = stderr; | |
726 | } | |
727 | } | |
728 | #endif /* TRACE */ | |
729 | ||
730 | /* Return name of an insn, used by insn profiling. */ | |
731 | static const char * | |
732 | get_insn_name (sim_cpu *cpu, int i) | |
733 | { | |
734 | return itable[i].name; | |
735 | } | |
736 | ||
737 | void | |
738 | sim_close (sd, quitting) | |
739 | SIM_DESC sd; | |
740 | int quitting; | |
741 | { | |
742 | #ifdef DEBUG | |
743 | printf("DBG: sim_close: entered (quitting = %d)\n",quitting); | |
744 | #endif | |
745 | ||
746 | ||
747 | /* "quitting" is non-zero if we cannot hang on errors */ | |
748 | ||
749 | /* shut down modules */ | |
750 | sim_module_uninstall (sd); | |
751 | ||
752 | /* Ensure that any resources allocated through the callback | |
753 | mechanism are released: */ | |
754 | sim_io_shutdown (sd); | |
755 | ||
756 | #if defined(TRACE) | |
757 | if (tracefh != NULL && tracefh != stderr) | |
758 | fclose(tracefh); | |
759 | tracefh = NULL; | |
760 | #endif /* TRACE */ | |
761 | ||
762 | /* FIXME - free SD */ | |
763 | ||
764 | return; | |
765 | } | |
766 | ||
767 | ||
768 | int | |
769 | sim_write (sd,addr,buffer,size) | |
770 | SIM_DESC sd; | |
771 | SIM_ADDR addr; | |
772 | unsigned char *buffer; | |
773 | int size; | |
774 | { | |
775 | int index; | |
776 | sim_cpu *cpu = STATE_CPU (sd, 0); /* FIXME */ | |
777 | ||
778 | /* Return the number of bytes written, or zero if error. */ | |
779 | #ifdef DEBUG | |
780 | sim_io_printf(sd,"sim_write(0x%s,buffer,%d);\n",pr_addr(addr),size); | |
781 | #endif | |
782 | ||
783 | /* We use raw read and write routines, since we do not want to count | |
784 | the GDB memory accesses in our statistics gathering. */ | |
785 | ||
786 | for (index = 0; index < size; index++) | |
787 | { | |
788 | address_word vaddr = (address_word)addr + index; | |
789 | address_word paddr; | |
790 | int cca; | |
791 | if (!address_translation (SD, CPU, NULL_CIA, vaddr, isDATA, isSTORE, &paddr, &cca, isRAW)) | |
792 | break; | |
793 | if (sim_core_write_buffer (SD, CPU, read_map, buffer + index, paddr, 1) != 1) | |
794 | break; | |
795 | } | |
796 | ||
797 | return(index); | |
798 | } | |
799 | ||
800 | int | |
801 | sim_read (sd,addr,buffer,size) | |
802 | SIM_DESC sd; | |
803 | SIM_ADDR addr; | |
804 | unsigned char *buffer; | |
805 | int size; | |
806 | { | |
807 | int index; | |
808 | sim_cpu *cpu = STATE_CPU (sd, 0); /* FIXME */ | |
809 | ||
810 | /* Return the number of bytes read, or zero if error. */ | |
811 | #ifdef DEBUG | |
812 | sim_io_printf(sd,"sim_read(0x%s,buffer,%d);\n",pr_addr(addr),size); | |
813 | #endif /* DEBUG */ | |
814 | ||
815 | for (index = 0; (index < size); index++) | |
816 | { | |
817 | address_word vaddr = (address_word)addr + index; | |
818 | address_word paddr; | |
819 | int cca; | |
820 | if (!address_translation (SD, CPU, NULL_CIA, vaddr, isDATA, isLOAD, &paddr, &cca, isRAW)) | |
821 | break; | |
822 | if (sim_core_read_buffer (SD, CPU, read_map, buffer + index, paddr, 1) != 1) | |
823 | break; | |
824 | } | |
825 | ||
826 | return(index); | |
827 | } | |
828 | ||
829 | int | |
830 | sim_store_register (sd,rn,memory,length) | |
831 | SIM_DESC sd; | |
832 | int rn; | |
833 | unsigned char *memory; | |
834 | int length; | |
835 | { | |
836 | sim_cpu *cpu = STATE_CPU (sd, 0); /* FIXME */ | |
837 | /* NOTE: gdb (the client) stores registers in target byte order | |
838 | while the simulator uses host byte order */ | |
839 | #ifdef DEBUG | |
840 | sim_io_printf(sd,"sim_store_register(%d,*memory=0x%s);\n",rn,pr_addr(*((SIM_ADDR *)memory))); | |
841 | #endif /* DEBUG */ | |
842 | ||
843 | /* Unfortunately this suffers from the same problem as the register | |
844 | numbering one. We need to know what the width of each logical | |
845 | register number is for the architecture being simulated. */ | |
846 | ||
847 | if (cpu->register_widths[rn] == 0) | |
848 | { | |
849 | sim_io_eprintf(sd,"Invalid register width for %d (register store ignored)\n",rn); | |
850 | return 0; | |
851 | } | |
852 | ||
853 | ||
854 | ||
855 | if (rn >= FGRIDX && rn < FGRIDX + NR_FGR) | |
856 | { | |
7a292a7a | 857 | cpu->fpr_state[rn - FGRIDX] = fmt_uninterpreted; |
c906108c SS |
858 | if (cpu->register_widths[rn] == 32) |
859 | { | |
a0b3c4fd JM |
860 | if (length == 8) |
861 | { | |
862 | cpu->fgr[rn - FGRIDX] = | |
863 | (unsigned32) T2H_8 (*(unsigned64*)memory); | |
864 | return 8; | |
865 | } | |
866 | else | |
867 | { | |
868 | cpu->fgr[rn - FGRIDX] = T2H_4 (*(unsigned32*)memory); | |
869 | return 4; | |
870 | } | |
c906108c SS |
871 | } |
872 | else | |
873 | { | |
874 | cpu->fgr[rn - FGRIDX] = T2H_8 (*(unsigned64*)memory); | |
875 | return 8; | |
876 | } | |
877 | } | |
878 | ||
879 | if (cpu->register_widths[rn] == 32) | |
880 | { | |
a0b3c4fd JM |
881 | if (length == 8) |
882 | { | |
883 | cpu->registers[rn] = | |
884 | (unsigned32) T2H_8 (*(unsigned64*)memory); | |
885 | return 8; | |
886 | } | |
887 | else | |
888 | { | |
889 | cpu->registers[rn] = T2H_4 (*(unsigned32*)memory); | |
890 | return 4; | |
891 | } | |
c906108c SS |
892 | } |
893 | else | |
894 | { | |
895 | cpu->registers[rn] = T2H_8 (*(unsigned64*)memory); | |
896 | return 8; | |
897 | } | |
898 | ||
899 | return 0; | |
900 | } | |
901 | ||
902 | int | |
903 | sim_fetch_register (sd,rn,memory,length) | |
904 | SIM_DESC sd; | |
905 | int rn; | |
906 | unsigned char *memory; | |
907 | int length; | |
908 | { | |
909 | sim_cpu *cpu = STATE_CPU (sd, 0); /* FIXME */ | |
910 | /* NOTE: gdb (the client) stores registers in target byte order | |
911 | while the simulator uses host byte order */ | |
912 | #ifdef DEBUG | |
913 | #if 0 /* FIXME: doesn't compile */ | |
914 | sim_io_printf(sd,"sim_fetch_register(%d=0x%s,mem) : place simulator registers into memory\n",rn,pr_addr(registers[rn])); | |
915 | #endif | |
916 | #endif /* DEBUG */ | |
917 | ||
918 | if (cpu->register_widths[rn] == 0) | |
919 | { | |
920 | sim_io_eprintf (sd, "Invalid register width for %d (register fetch ignored)\n",rn); | |
921 | return 0; | |
922 | } | |
923 | ||
924 | ||
925 | ||
926 | /* Any floating point register */ | |
927 | if (rn >= FGRIDX && rn < FGRIDX + NR_FGR) | |
928 | { | |
929 | if (cpu->register_widths[rn] == 32) | |
930 | { | |
a0b3c4fd JM |
931 | if (length == 8) |
932 | { | |
933 | *(unsigned64*)memory = | |
934 | H2T_8 ((unsigned32) (cpu->fgr[rn - FGRIDX])); | |
935 | return 8; | |
936 | } | |
937 | else | |
938 | { | |
939 | *(unsigned32*)memory = H2T_4 (cpu->fgr[rn - FGRIDX]); | |
940 | return 4; | |
941 | } | |
c906108c SS |
942 | } |
943 | else | |
944 | { | |
945 | *(unsigned64*)memory = H2T_8 (cpu->fgr[rn - FGRIDX]); | |
946 | return 8; | |
947 | } | |
948 | } | |
949 | ||
950 | if (cpu->register_widths[rn] == 32) | |
951 | { | |
a0b3c4fd JM |
952 | if (length == 8) |
953 | { | |
954 | *(unsigned64*)memory = | |
955 | H2T_8 ((unsigned32) (cpu->registers[rn])); | |
956 | return 8; | |
957 | } | |
958 | else | |
959 | { | |
960 | *(unsigned32*)memory = H2T_4 ((unsigned32)(cpu->registers[rn])); | |
961 | return 4; | |
962 | } | |
c906108c SS |
963 | } |
964 | else | |
965 | { | |
966 | *(unsigned64*)memory = H2T_8 ((unsigned64)(cpu->registers[rn])); | |
967 | return 8; | |
968 | } | |
969 | ||
970 | return 0; | |
971 | } | |
972 | ||
973 | ||
974 | SIM_RC | |
975 | sim_create_inferior (sd, abfd, argv,env) | |
976 | SIM_DESC sd; | |
977 | struct _bfd *abfd; | |
978 | char **argv; | |
979 | char **env; | |
980 | { | |
981 | ||
982 | #ifdef DEBUG | |
983 | #if 0 /* FIXME: doesn't compile */ | |
984 | printf("DBG: sim_create_inferior entered: start_address = 0x%s\n", | |
985 | pr_addr(PC)); | |
986 | #endif | |
987 | #endif /* DEBUG */ | |
988 | ||
989 | ColdReset(sd); | |
990 | ||
991 | if (abfd != NULL) | |
992 | { | |
993 | /* override PC value set by ColdReset () */ | |
994 | int cpu_nr; | |
995 | for (cpu_nr = 0; cpu_nr < sim_engine_nr_cpus (sd); cpu_nr++) | |
996 | { | |
997 | sim_cpu *cpu = STATE_CPU (sd, cpu_nr); | |
998 | CIA_SET (cpu, (unsigned64) bfd_get_start_address (abfd)); | |
999 | } | |
1000 | } | |
1001 | ||
1002 | #if 0 /* def DEBUG */ | |
1003 | if (argv || env) | |
1004 | { | |
1005 | /* We should really place the argv slot values into the argument | |
1006 | registers, and onto the stack as required. However, this | |
1007 | assumes that we have a stack defined, which is not | |
1008 | necessarily true at the moment. */ | |
1009 | char **cptr; | |
1010 | sim_io_printf(sd,"sim_create_inferior() : passed arguments ignored\n"); | |
1011 | for (cptr = argv; (cptr && *cptr); cptr++) | |
1012 | printf("DBG: arg \"%s\"\n",*cptr); | |
1013 | } | |
1014 | #endif /* DEBUG */ | |
1015 | ||
1016 | return SIM_RC_OK; | |
1017 | } | |
1018 | ||
1019 | void | |
1020 | sim_do_command (sd,cmd) | |
1021 | SIM_DESC sd; | |
1022 | char *cmd; | |
1023 | { | |
1024 | if (sim_args_command (sd, cmd) != SIM_RC_OK) | |
1025 | sim_io_printf (sd, "Error: \"%s\" is not a valid MIPS simulator command.\n", | |
1026 | cmd); | |
1027 | } | |
1028 | ||
1029 | /*---------------------------------------------------------------------------*/ | |
1030 | /*-- Private simulator support interface ------------------------------------*/ | |
1031 | /*---------------------------------------------------------------------------*/ | |
1032 | ||
1033 | /* Read a null terminated string from memory, return in a buffer */ | |
1034 | static char * | |
1035 | fetch_str (SIM_DESC sd, | |
1036 | address_word addr) | |
1037 | { | |
1038 | char *buf; | |
1039 | int nr = 0; | |
1040 | char null; | |
1041 | while (sim_read (sd, addr + nr, &null, 1) == 1 && null != 0) | |
1042 | nr++; | |
1043 | buf = NZALLOC (char, nr + 1); | |
1044 | sim_read (sd, addr, buf, nr); | |
1045 | return buf; | |
1046 | } | |
1047 | ||
adf40b2e JM |
1048 | |
1049 | /* Implements the "sim firmware" command: | |
1050 | sim firmware NAME[@ADDRESS] --- emulate ROM monitor named NAME. | |
1051 | NAME can be idt, pmon, or lsipmon. If omitted, ADDRESS | |
1052 | defaults to the normal address for that monitor. | |
1053 | sim firmware none --- don't emulate any ROM monitor. Useful | |
1054 | if you need a clean address space. */ | |
1055 | static SIM_RC | |
1056 | sim_firmware_command (SIM_DESC sd, char *arg) | |
1057 | { | |
1058 | int address_present = 0; | |
1059 | SIM_ADDR address; | |
1060 | ||
1061 | /* Signal occurrence of this option. */ | |
1062 | firmware_option_p = 1; | |
1063 | ||
1064 | /* Parse out the address, if present. */ | |
1065 | { | |
1066 | char *p = strchr (arg, '@'); | |
1067 | if (p) | |
1068 | { | |
1069 | char *q; | |
1070 | address_present = 1; | |
1071 | p ++; /* skip over @ */ | |
1072 | ||
1073 | address = strtoul (p, &q, 0); | |
1074 | if (*q != '\0') | |
1075 | { | |
1076 | sim_io_printf (sd, "Invalid address given to the" | |
1077 | "`sim firmware NAME@ADDRESS' command: %s\n", | |
1078 | p); | |
1079 | return SIM_RC_FAIL; | |
1080 | } | |
1081 | } | |
1082 | else | |
1083 | address_present = 0; | |
1084 | } | |
1085 | ||
1086 | if (! strncmp (arg, "idt", 3)) | |
1087 | { | |
1088 | idt_monitor_base = address_present ? address : 0xBFC00000; | |
1089 | pmon_monitor_base = 0; | |
1090 | lsipmon_monitor_base = 0; | |
1091 | } | |
1092 | else if (! strncmp (arg, "pmon", 4)) | |
1093 | { | |
1094 | /* pmon uses indirect calls. Hook into implied idt. */ | |
1095 | pmon_monitor_base = address_present ? address : 0xBFC00500; | |
1096 | idt_monitor_base = pmon_monitor_base - 0x500; | |
1097 | lsipmon_monitor_base = 0; | |
1098 | } | |
1099 | else if (! strncmp (arg, "lsipmon", 7)) | |
1100 | { | |
1101 | /* lsipmon uses indirect calls. Hook into implied idt. */ | |
1102 | pmon_monitor_base = 0; | |
1103 | lsipmon_monitor_base = address_present ? address : 0xBFC00200; | |
1104 | idt_monitor_base = lsipmon_monitor_base - 0x200; | |
1105 | } | |
1106 | else if (! strncmp (arg, "none", 4)) | |
1107 | { | |
1108 | if (address_present) | |
1109 | { | |
1110 | sim_io_printf (sd, | |
1111 | "The `sim firmware none' command does " | |
1112 | "not take an `ADDRESS' argument.\n"); | |
1113 | return SIM_RC_FAIL; | |
1114 | } | |
1115 | idt_monitor_base = 0; | |
1116 | pmon_monitor_base = 0; | |
1117 | lsipmon_monitor_base = 0; | |
1118 | } | |
1119 | else | |
1120 | { | |
1121 | sim_io_printf (sd, "\ | |
1122 | Unrecognized name given to the `sim firmware NAME' command: %s\n\ | |
1123 | Recognized firmware names are: `idt', `pmon', `lsipmon', and `none'.\n", | |
1124 | arg); | |
1125 | return SIM_RC_FAIL; | |
1126 | } | |
1127 | ||
1128 | return SIM_RC_OK; | |
1129 | } | |
1130 | ||
1131 | ||
1132 | ||
c906108c SS |
1133 | /* Simple monitor interface (currently setup for the IDT and PMON monitors) */ |
1134 | void | |
1135 | sim_monitor (SIM_DESC sd, | |
1136 | sim_cpu *cpu, | |
1137 | address_word cia, | |
1138 | unsigned int reason) | |
1139 | { | |
1140 | #ifdef DEBUG | |
1141 | printf("DBG: sim_monitor: entered (reason = %d)\n",reason); | |
1142 | #endif /* DEBUG */ | |
1143 | ||
1144 | /* The IDT monitor actually allows two instructions per vector | |
1145 | slot. However, the simulator currently causes a trap on each | |
1146 | individual instruction. We cheat, and lose the bottom bit. */ | |
1147 | reason >>= 1; | |
1148 | ||
1149 | /* The following callback functions are available, however the | |
1150 | monitor we are simulating does not make use of them: get_errno, | |
1151 | isatty, lseek, rename, system, time and unlink */ | |
1152 | switch (reason) | |
1153 | { | |
1154 | ||
1155 | case 6: /* int open(char *path,int flags) */ | |
1156 | { | |
1157 | char *path = fetch_str (sd, A0); | |
1158 | V0 = sim_io_open (sd, path, (int)A1); | |
1159 | zfree (path); | |
1160 | break; | |
1161 | } | |
1162 | ||
1163 | case 7: /* int read(int file,char *ptr,int len) */ | |
1164 | { | |
1165 | int fd = A0; | |
1166 | int nr = A2; | |
1167 | char *buf = zalloc (nr); | |
1168 | V0 = sim_io_read (sd, fd, buf, nr); | |
1169 | sim_write (sd, A1, buf, nr); | |
1170 | zfree (buf); | |
1171 | } | |
1172 | break; | |
1173 | ||
1174 | case 8: /* int write(int file,char *ptr,int len) */ | |
1175 | { | |
1176 | int fd = A0; | |
1177 | int nr = A2; | |
1178 | char *buf = zalloc (nr); | |
1179 | sim_read (sd, A1, buf, nr); | |
1180 | V0 = sim_io_write (sd, fd, buf, nr); | |
1181 | zfree (buf); | |
1182 | break; | |
1183 | } | |
1184 | ||
1185 | case 10: /* int close(int file) */ | |
1186 | { | |
1187 | V0 = sim_io_close (sd, (int)A0); | |
1188 | break; | |
1189 | } | |
1190 | ||
1191 | case 2: /* Densan monitor: char inbyte(int waitflag) */ | |
1192 | { | |
1193 | if (A0 == 0) /* waitflag == NOWAIT */ | |
1194 | V0 = (unsigned_word)-1; | |
1195 | } | |
1196 | /* Drop through to case 11 */ | |
1197 | ||
1198 | case 11: /* char inbyte(void) */ | |
1199 | { | |
1200 | char tmp; | |
43e526b9 JM |
1201 | /* ensure that all output has gone... */ |
1202 | sim_io_flush_stdout (sd); | |
c906108c SS |
1203 | if (sim_io_read_stdin (sd, &tmp, sizeof(char)) != sizeof(char)) |
1204 | { | |
1205 | sim_io_error(sd,"Invalid return from character read"); | |
1206 | V0 = (unsigned_word)-1; | |
1207 | } | |
1208 | else | |
1209 | V0 = (unsigned_word)tmp; | |
1210 | break; | |
1211 | } | |
1212 | ||
1213 | case 3: /* Densan monitor: void co(char chr) */ | |
1214 | case 12: /* void outbyte(char chr) : write a byte to "stdout" */ | |
1215 | { | |
1216 | char tmp = (char)(A0 & 0xFF); | |
1217 | sim_io_write_stdout (sd, &tmp, sizeof(char)); | |
1218 | break; | |
1219 | } | |
1220 | ||
1221 | case 17: /* void _exit() */ | |
1222 | { | |
1223 | sim_io_eprintf (sd, "sim_monitor(17): _exit(int reason) to be coded\n"); | |
1224 | sim_engine_halt (SD, CPU, NULL, NULL_CIA, sim_exited, | |
1225 | (unsigned int)(A0 & 0xFFFFFFFF)); | |
1226 | break; | |
1227 | } | |
1228 | ||
1229 | case 28 : /* PMON flush_cache */ | |
1230 | break; | |
1231 | ||
1232 | case 55: /* void get_mem_info(unsigned int *ptr) */ | |
1233 | /* in: A0 = pointer to three word memory location */ | |
1234 | /* out: [A0 + 0] = size */ | |
1235 | /* [A0 + 4] = instruction cache size */ | |
1236 | /* [A0 + 8] = data cache size */ | |
1237 | { | |
1238 | unsigned_4 value = MEM_SIZE /* FIXME STATE_MEM_SIZE (sd) */; | |
1239 | unsigned_4 zero = 0; | |
1240 | H2T (value); | |
1241 | sim_write (sd, A0 + 0, (char *)&value, 4); | |
1242 | sim_write (sd, A0 + 4, (char *)&zero, 4); | |
1243 | sim_write (sd, A0 + 8, (char *)&zero, 4); | |
1244 | /* sim_io_eprintf (sd, "sim: get_mem_info() depreciated\n"); */ | |
1245 | break; | |
1246 | } | |
1247 | ||
1248 | case 158 : /* PMON printf */ | |
1249 | /* in: A0 = pointer to format string */ | |
1250 | /* A1 = optional argument 1 */ | |
1251 | /* A2 = optional argument 2 */ | |
1252 | /* A3 = optional argument 3 */ | |
1253 | /* out: void */ | |
1254 | /* The following is based on the PMON printf source */ | |
1255 | { | |
1256 | address_word s = A0; | |
1257 | char c; | |
1258 | signed_word *ap = &A1; /* 1st argument */ | |
1259 | /* This isn't the quickest way, since we call the host print | |
1260 | routine for every character almost. But it does avoid | |
1261 | having to allocate and manage a temporary string buffer. */ | |
1262 | /* TODO: Include check that we only use three arguments (A1, | |
1263 | A2 and A3) */ | |
1264 | while (sim_read (sd, s++, &c, 1) && c != '\0') | |
1265 | { | |
1266 | if (c == '%') | |
1267 | { | |
1268 | char tmp[40]; | |
1269 | enum {FMT_RJUST, FMT_LJUST, FMT_RJUST0, FMT_CENTER} fmt = FMT_RJUST; | |
1270 | int width = 0, trunc = 0, haddot = 0, longlong = 0; | |
1271 | while (sim_read (sd, s++, &c, 1) && c != '\0') | |
1272 | { | |
1273 | if (strchr ("dobxXulscefg%", c)) | |
1274 | break; | |
1275 | else if (c == '-') | |
1276 | fmt = FMT_LJUST; | |
1277 | else if (c == '0') | |
1278 | fmt = FMT_RJUST0; | |
1279 | else if (c == '~') | |
1280 | fmt = FMT_CENTER; | |
1281 | else if (c == '*') | |
1282 | { | |
1283 | if (haddot) | |
1284 | trunc = (int)*ap++; | |
1285 | else | |
1286 | width = (int)*ap++; | |
1287 | } | |
1288 | else if (c >= '1' && c <= '9') | |
1289 | { | |
1290 | address_word t = s; | |
1291 | unsigned int n; | |
1292 | while (sim_read (sd, s++, &c, 1) == 1 && isdigit (c)) | |
1293 | tmp[s - t] = c; | |
1294 | tmp[s - t] = '\0'; | |
1295 | n = (unsigned int)strtol(tmp,NULL,10); | |
1296 | if (haddot) | |
1297 | trunc = n; | |
1298 | else | |
1299 | width = n; | |
1300 | s--; | |
1301 | } | |
1302 | else if (c == '.') | |
1303 | haddot = 1; | |
1304 | } | |
1305 | switch (c) | |
1306 | { | |
1307 | case '%': | |
1308 | sim_io_printf (sd, "%%"); | |
1309 | break; | |
1310 | case 's': | |
1311 | if ((int)*ap != 0) | |
1312 | { | |
1313 | address_word p = *ap++; | |
1314 | char ch; | |
1315 | while (sim_read (sd, p++, &ch, 1) == 1 && ch != '\0') | |
1316 | sim_io_printf(sd, "%c", ch); | |
1317 | } | |
1318 | else | |
1319 | sim_io_printf(sd,"(null)"); | |
1320 | break; | |
1321 | case 'c': | |
1322 | sim_io_printf (sd, "%c", (int)*ap++); | |
1323 | break; | |
1324 | default: | |
1325 | if (c == 'l') | |
1326 | { | |
1327 | sim_read (sd, s++, &c, 1); | |
1328 | if (c == 'l') | |
1329 | { | |
1330 | longlong = 1; | |
1331 | sim_read (sd, s++, &c, 1); | |
1332 | } | |
1333 | } | |
1334 | if (strchr ("dobxXu", c)) | |
1335 | { | |
1336 | word64 lv = (word64) *ap++; | |
1337 | if (c == 'b') | |
1338 | sim_io_printf(sd,"<binary not supported>"); | |
1339 | else | |
1340 | { | |
1341 | sprintf (tmp, "%%%s%c", longlong ? "ll" : "", c); | |
1342 | if (longlong) | |
1343 | sim_io_printf(sd, tmp, lv); | |
1344 | else | |
1345 | sim_io_printf(sd, tmp, (int)lv); | |
1346 | } | |
1347 | } | |
1348 | else if (strchr ("eEfgG", c)) | |
1349 | { | |
1350 | double dbl = *(double*)(ap++); | |
1351 | sprintf (tmp, "%%%d.%d%c", width, trunc, c); | |
1352 | sim_io_printf (sd, tmp, dbl); | |
1353 | trunc = 0; | |
1354 | } | |
1355 | } | |
1356 | } | |
1357 | else | |
1358 | sim_io_printf(sd, "%c", c); | |
1359 | } | |
1360 | break; | |
1361 | } | |
1362 | ||
1363 | default: | |
1364 | sim_io_error (sd, "TODO: sim_monitor(%d) : PC = 0x%s\n", | |
1365 | reason, pr_addr(cia)); | |
1366 | break; | |
1367 | } | |
1368 | return; | |
1369 | } | |
1370 | ||
1371 | /* Store a word into memory. */ | |
1372 | ||
1373 | static void | |
1374 | store_word (SIM_DESC sd, | |
1375 | sim_cpu *cpu, | |
1376 | address_word cia, | |
1377 | uword64 vaddr, | |
1378 | signed_word val) | |
1379 | { | |
1380 | address_word paddr; | |
1381 | int uncached; | |
1382 | ||
1383 | if ((vaddr & 3) != 0) | |
1384 | SignalExceptionAddressStore (); | |
1385 | else | |
1386 | { | |
1387 | if (AddressTranslation (vaddr, isDATA, isSTORE, &paddr, &uncached, | |
1388 | isTARGET, isREAL)) | |
1389 | { | |
1390 | const uword64 mask = 7; | |
1391 | uword64 memval; | |
1392 | unsigned int byte; | |
1393 | ||
1394 | paddr = (paddr & ~mask) | ((paddr & mask) ^ (ReverseEndian << 2)); | |
1395 | byte = (vaddr & mask) ^ (BigEndianCPU << 2); | |
1396 | memval = ((uword64) val) << (8 * byte); | |
1397 | StoreMemory (uncached, AccessLength_WORD, memval, 0, paddr, vaddr, | |
1398 | isREAL); | |
1399 | } | |
1400 | } | |
1401 | } | |
1402 | ||
1403 | /* Load a word from memory. */ | |
1404 | ||
1405 | static signed_word | |
1406 | load_word (SIM_DESC sd, | |
1407 | sim_cpu *cpu, | |
1408 | address_word cia, | |
1409 | uword64 vaddr) | |
1410 | { | |
1411 | if ((vaddr & 3) != 0) | |
1412 | { | |
1413 | SIM_CORE_SIGNAL (SD, cpu, cia, read_map, AccessLength_WORD+1, vaddr, read_transfer, sim_core_unaligned_signal); | |
1414 | } | |
1415 | else | |
1416 | { | |
1417 | address_word paddr; | |
1418 | int uncached; | |
1419 | ||
1420 | if (AddressTranslation (vaddr, isDATA, isLOAD, &paddr, &uncached, | |
1421 | isTARGET, isREAL)) | |
1422 | { | |
1423 | const uword64 mask = 0x7; | |
1424 | const unsigned int reverse = ReverseEndian ? 1 : 0; | |
1425 | const unsigned int bigend = BigEndianCPU ? 1 : 0; | |
1426 | uword64 memval; | |
1427 | unsigned int byte; | |
1428 | ||
1429 | paddr = (paddr & ~mask) | ((paddr & mask) ^ (reverse << 2)); | |
1430 | LoadMemory (&memval,NULL,uncached, AccessLength_WORD, paddr, vaddr, | |
1431 | isDATA, isREAL); | |
1432 | byte = (vaddr & mask) ^ (bigend << 2); | |
1433 | return SIGNEXTEND (((memval >> (8 * byte)) & 0xffffffff), 32); | |
1434 | } | |
1435 | } | |
1436 | ||
1437 | return 0; | |
1438 | } | |
1439 | ||
1440 | /* Simulate the mips16 entry and exit pseudo-instructions. These | |
1441 | would normally be handled by the reserved instruction exception | |
1442 | code, but for ease of simulation we just handle them directly. */ | |
1443 | ||
1444 | static void | |
1445 | mips16_entry (SIM_DESC sd, | |
1446 | sim_cpu *cpu, | |
1447 | address_word cia, | |
1448 | unsigned int insn) | |
1449 | { | |
1450 | int aregs, sregs, rreg; | |
1451 | ||
1452 | #ifdef DEBUG | |
1453 | printf("DBG: mips16_entry: entered (insn = 0x%08X)\n",insn); | |
1454 | #endif /* DEBUG */ | |
1455 | ||
1456 | aregs = (insn & 0x700) >> 8; | |
1457 | sregs = (insn & 0x0c0) >> 6; | |
1458 | rreg = (insn & 0x020) >> 5; | |
1459 | ||
1460 | /* This should be checked by the caller. */ | |
1461 | if (sregs == 3) | |
1462 | abort (); | |
1463 | ||
1464 | if (aregs < 5) | |
1465 | { | |
1466 | int i; | |
1467 | signed_word tsp; | |
1468 | ||
1469 | /* This is the entry pseudo-instruction. */ | |
1470 | ||
1471 | for (i = 0; i < aregs; i++) | |
1472 | store_word (SD, CPU, cia, (uword64) (SP + 4 * i), GPR[i + 4]); | |
1473 | ||
1474 | tsp = SP; | |
1475 | SP -= 32; | |
1476 | ||
1477 | if (rreg) | |
1478 | { | |
1479 | tsp -= 4; | |
1480 | store_word (SD, CPU, cia, (uword64) tsp, RA); | |
1481 | } | |
1482 | ||
1483 | for (i = 0; i < sregs; i++) | |
1484 | { | |
1485 | tsp -= 4; | |
1486 | store_word (SD, CPU, cia, (uword64) tsp, GPR[16 + i]); | |
1487 | } | |
1488 | } | |
1489 | else | |
1490 | { | |
1491 | int i; | |
1492 | signed_word tsp; | |
1493 | ||
1494 | /* This is the exit pseudo-instruction. */ | |
1495 | ||
1496 | tsp = SP + 32; | |
1497 | ||
1498 | if (rreg) | |
1499 | { | |
1500 | tsp -= 4; | |
1501 | RA = load_word (SD, CPU, cia, (uword64) tsp); | |
1502 | } | |
1503 | ||
1504 | for (i = 0; i < sregs; i++) | |
1505 | { | |
1506 | tsp -= 4; | |
1507 | GPR[i + 16] = load_word (SD, CPU, cia, (uword64) tsp); | |
1508 | } | |
1509 | ||
1510 | SP += 32; | |
1511 | ||
1512 | if (CURRENT_FLOATING_POINT == HARD_FLOATING_POINT) | |
1513 | { | |
1514 | if (aregs == 5) | |
1515 | { | |
1516 | FGR[0] = WORD64LO (GPR[4]); | |
1517 | FPR_STATE[0] = fmt_uninterpreted; | |
1518 | } | |
1519 | else if (aregs == 6) | |
1520 | { | |
1521 | FGR[0] = WORD64LO (GPR[5]); | |
1522 | FGR[1] = WORD64LO (GPR[4]); | |
1523 | FPR_STATE[0] = fmt_uninterpreted; | |
1524 | FPR_STATE[1] = fmt_uninterpreted; | |
1525 | } | |
1526 | } | |
1527 | ||
1528 | PC = RA; | |
1529 | } | |
1530 | ||
1531 | } | |
1532 | ||
1533 | /*-- trace support ----------------------------------------------------------*/ | |
1534 | ||
1535 | /* The TRACE support is provided (if required) in the memory accessing | |
1536 | routines. Since we are also providing the architecture specific | |
1537 | features, the architecture simulation code can also deal with | |
1538 | notifying the TRACE world of cache flushes, etc. Similarly we do | |
1539 | not need to provide profiling support in the simulator engine, | |
1540 | since we can sample in the instruction fetch control loop. By | |
1541 | defining the TRACE manifest, we add tracing as a run-time | |
1542 | option. */ | |
1543 | ||
1544 | #if defined(TRACE) | |
1545 | /* Tracing by default produces "din" format (as required by | |
1546 | dineroIII). Each line of such a trace file *MUST* have a din label | |
1547 | and address field. The rest of the line is ignored, so comments can | |
1548 | be included if desired. The first field is the label which must be | |
1549 | one of the following values: | |
1550 | ||
1551 | 0 read data | |
1552 | 1 write data | |
1553 | 2 instruction fetch | |
1554 | 3 escape record (treated as unknown access type) | |
1555 | 4 escape record (causes cache flush) | |
1556 | ||
1557 | The address field is a 32bit (lower-case) hexadecimal address | |
1558 | value. The address should *NOT* be preceded by "0x". | |
1559 | ||
1560 | The size of the memory transfer is not important when dealing with | |
1561 | cache lines (as long as no more than a cache line can be | |
1562 | transferred in a single operation :-), however more information | |
1563 | could be given following the dineroIII requirement to allow more | |
1564 | complete memory and cache simulators to provide better | |
1565 | results. i.e. the University of Pisa has a cache simulator that can | |
1566 | also take bus size and speed as (variable) inputs to calculate | |
1567 | complete system performance (a much more useful ability when trying | |
1568 | to construct an end product, rather than a processor). They | |
1569 | currently have an ARM version of their tool called ChARM. */ | |
1570 | ||
1571 | ||
1572 | void | |
1573 | dotrace (SIM_DESC sd, | |
1574 | sim_cpu *cpu, | |
1575 | FILE *tracefh, | |
1576 | int type, | |
1577 | SIM_ADDR address, | |
1578 | int width, | |
1579 | char *comment,...) | |
1580 | { | |
1581 | if (STATE & simTRACE) { | |
1582 | va_list ap; | |
1583 | fprintf(tracefh,"%d %s ; width %d ; ", | |
1584 | type, | |
1585 | pr_addr(address), | |
1586 | width); | |
1587 | va_start(ap,comment); | |
1588 | vfprintf(tracefh,comment,ap); | |
1589 | va_end(ap); | |
1590 | fprintf(tracefh,"\n"); | |
1591 | } | |
1592 | /* NOTE: Since the "din" format will only accept 32bit addresses, and | |
1593 | we may be generating 64bit ones, we should put the hi-32bits of the | |
1594 | address into the comment field. */ | |
1595 | ||
1596 | /* TODO: Provide a buffer for the trace lines. We can then avoid | |
1597 | performing writes until the buffer is filled, or the file is | |
1598 | being closed. */ | |
1599 | ||
1600 | /* NOTE: We could consider adding a comment field to the "din" file | |
1601 | produced using type 3 markers (unknown access). This would then | |
1602 | allow information about the program that the "din" is for, and | |
1603 | the MIPs world that was being simulated, to be placed into the | |
1604 | trace file. */ | |
1605 | ||
1606 | return; | |
1607 | } | |
1608 | #endif /* TRACE */ | |
1609 | ||
1610 | /*---------------------------------------------------------------------------*/ | |
1611 | /*-- simulator engine -------------------------------------------------------*/ | |
1612 | /*---------------------------------------------------------------------------*/ | |
1613 | ||
1614 | static void | |
1615 | ColdReset (SIM_DESC sd) | |
1616 | { | |
1617 | int cpu_nr; | |
1618 | for (cpu_nr = 0; cpu_nr < sim_engine_nr_cpus (sd); cpu_nr++) | |
1619 | { | |
1620 | sim_cpu *cpu = STATE_CPU (sd, cpu_nr); | |
1621 | /* RESET: Fixed PC address: */ | |
1622 | PC = (unsigned_word) UNSIGNED64 (0xFFFFFFFFBFC00000); | |
1623 | /* The reset vector address is in the unmapped, uncached memory space. */ | |
1624 | ||
1625 | SR &= ~(status_SR | status_TS | status_RP); | |
1626 | SR |= (status_ERL | status_BEV); | |
1627 | ||
1628 | /* Cheat and allow access to the complete register set immediately */ | |
1629 | if (CURRENT_FLOATING_POINT == HARD_FLOATING_POINT | |
1630 | && WITH_TARGET_WORD_BITSIZE == 64) | |
1631 | SR |= status_FR; /* 64bit registers */ | |
1632 | ||
1633 | /* Ensure that any instructions with pending register updates are | |
1634 | cleared: */ | |
1635 | PENDING_INVALIDATE(); | |
1636 | ||
1637 | /* Initialise the FPU registers to the unknown state */ | |
1638 | if (CURRENT_FLOATING_POINT == HARD_FLOATING_POINT) | |
1639 | { | |
1640 | int rn; | |
1641 | for (rn = 0; (rn < 32); rn++) | |
1642 | FPR_STATE[rn] = fmt_uninterpreted; | |
1643 | } | |
1644 | ||
1645 | } | |
1646 | } | |
1647 | ||
1648 | ||
1649 | ||
1650 | ||
1651 | /* Description from page A-26 of the "MIPS IV Instruction Set" manual (revision 3.1) */ | |
1652 | /* Signal an exception condition. This will result in an exception | |
1653 | that aborts the instruction. The instruction operation pseudocode | |
1654 | will never see a return from this function call. */ | |
1655 | ||
1656 | void | |
1657 | signal_exception (SIM_DESC sd, | |
1658 | sim_cpu *cpu, | |
1659 | address_word cia, | |
1660 | int exception,...) | |
1661 | { | |
1662 | /* int vector; */ | |
1663 | ||
1664 | #ifdef DEBUG | |
1665 | sim_io_printf(sd,"DBG: SignalException(%d) PC = 0x%s\n",exception,pr_addr(cia)); | |
1666 | #endif /* DEBUG */ | |
1667 | ||
1668 | /* Ensure that any active atomic read/modify/write operation will fail: */ | |
1669 | LLBIT = 0; | |
1670 | ||
1671 | /* Save registers before interrupt dispatching */ | |
1672 | #ifdef SIM_CPU_EXCEPTION_TRIGGER | |
1673 | SIM_CPU_EXCEPTION_TRIGGER(sd, cpu, cia); | |
1674 | #endif | |
1675 | ||
1676 | switch (exception) { | |
1677 | ||
1678 | case DebugBreakPoint : | |
1679 | if (! (Debug & Debug_DM)) | |
1680 | { | |
1681 | if (INDELAYSLOT()) | |
1682 | { | |
1683 | CANCELDELAYSLOT(); | |
1684 | ||
1685 | Debug |= Debug_DBD; /* signaled from within in delay slot */ | |
1686 | DEPC = cia - 4; /* reference the branch instruction */ | |
1687 | } | |
1688 | else | |
1689 | { | |
1690 | Debug &= ~Debug_DBD; /* not signaled from within a delay slot */ | |
1691 | DEPC = cia; | |
1692 | } | |
1693 | ||
1694 | Debug |= Debug_DM; /* in debugging mode */ | |
1695 | Debug |= Debug_DBp; /* raising a DBp exception */ | |
1696 | PC = 0xBFC00200; | |
1697 | sim_engine_restart (SD, CPU, NULL, NULL_CIA); | |
1698 | } | |
1699 | break; | |
1700 | ||
1701 | case ReservedInstruction : | |
1702 | { | |
1703 | va_list ap; | |
1704 | unsigned int instruction; | |
1705 | va_start(ap,exception); | |
1706 | instruction = va_arg(ap,unsigned int); | |
1707 | va_end(ap); | |
1708 | /* Provide simple monitor support using ReservedInstruction | |
1709 | exceptions. The following code simulates the fixed vector | |
1710 | entry points into the IDT monitor by causing a simulator | |
1711 | trap, performing the monitor operation, and returning to | |
1712 | the address held in the $ra register (standard PCS return | |
1713 | address). This means we only need to pre-load the vector | |
1714 | space with suitable instruction values. For systems were | |
1715 | actual trap instructions are used, we would not need to | |
1716 | perform this magic. */ | |
1717 | if ((instruction & RSVD_INSTRUCTION_MASK) == RSVD_INSTRUCTION) | |
1718 | { | |
1719 | sim_monitor (SD, CPU, cia, ((instruction >> RSVD_INSTRUCTION_ARG_SHIFT) & RSVD_INSTRUCTION_ARG_MASK) ); | |
1720 | /* NOTE: This assumes that a branch-and-link style | |
1721 | instruction was used to enter the vector (which is the | |
1722 | case with the current IDT monitor). */ | |
1723 | sim_engine_restart (SD, CPU, NULL, RA); | |
1724 | } | |
1725 | /* Look for the mips16 entry and exit instructions, and | |
1726 | simulate a handler for them. */ | |
1727 | else if ((cia & 1) != 0 | |
1728 | && (instruction & 0xf81f) == 0xe809 | |
1729 | && (instruction & 0x0c0) != 0x0c0) | |
1730 | { | |
1731 | mips16_entry (SD, CPU, cia, instruction); | |
1732 | sim_engine_restart (sd, NULL, NULL, NULL_CIA); | |
1733 | } | |
1734 | /* else fall through to normal exception processing */ | |
1735 | sim_io_eprintf(sd,"ReservedInstruction at PC = 0x%s\n", pr_addr (cia)); | |
1736 | } | |
1737 | ||
1738 | default: | |
1739 | /* Store exception code into current exception id variable (used | |
1740 | by exit code): */ | |
1741 | ||
1742 | /* TODO: If not simulating exceptions then stop the simulator | |
1743 | execution. At the moment we always stop the simulation. */ | |
1744 | ||
1745 | #ifdef SUBTARGET_R3900 | |
1746 | /* update interrupt-related registers */ | |
1747 | ||
1748 | /* insert exception code in bits 6:2 */ | |
1749 | CAUSE = LSMASKED32(CAUSE, 31, 7) | LSINSERTED32(exception, 6, 2); | |
1750 | /* shift IE/KU history bits left */ | |
1751 | SR = LSMASKED32(SR, 31, 4) | LSINSERTED32(LSEXTRACTED32(SR, 3, 0), 5, 2); | |
1752 | ||
1753 | if (STATE & simDELAYSLOT) | |
1754 | { | |
1755 | STATE &= ~simDELAYSLOT; | |
1756 | CAUSE |= cause_BD; | |
1757 | EPC = (cia - 4); /* reference the branch instruction */ | |
1758 | } | |
1759 | else | |
1760 | EPC = cia; | |
1761 | ||
1762 | if (SR & status_BEV) | |
1763 | PC = (signed)0xBFC00000 + 0x180; | |
1764 | else | |
1765 | PC = (signed)0x80000000 + 0x080; | |
1766 | #else | |
1767 | /* See figure 5-17 for an outline of the code below */ | |
1768 | if (! (SR & status_EXL)) | |
1769 | { | |
1770 | CAUSE = (exception << 2); | |
1771 | if (STATE & simDELAYSLOT) | |
1772 | { | |
1773 | STATE &= ~simDELAYSLOT; | |
1774 | CAUSE |= cause_BD; | |
1775 | EPC = (cia - 4); /* reference the branch instruction */ | |
1776 | } | |
1777 | else | |
1778 | EPC = cia; | |
1779 | /* FIXME: TLB et.al. */ | |
1780 | /* vector = 0x180; */ | |
1781 | } | |
1782 | else | |
1783 | { | |
1784 | CAUSE = (exception << 2); | |
1785 | /* vector = 0x180; */ | |
1786 | } | |
1787 | SR |= status_EXL; | |
1788 | /* Store exception code into current exception id variable (used | |
1789 | by exit code): */ | |
1790 | ||
1791 | if (SR & status_BEV) | |
1792 | PC = (signed)0xBFC00200 + 0x180; | |
1793 | else | |
1794 | PC = (signed)0x80000000 + 0x180; | |
1795 | #endif | |
1796 | ||
1797 | switch ((CAUSE >> 2) & 0x1F) | |
1798 | { | |
1799 | case Interrupt: | |
1800 | /* Interrupts arrive during event processing, no need to | |
1801 | restart */ | |
1802 | return; | |
1803 | ||
1804 | case NMIReset: | |
1805 | /* Ditto */ | |
1806 | #ifdef SUBTARGET_3900 | |
1807 | /* Exception vector: BEV=0 BFC00000 / BEF=1 BFC00000 */ | |
1808 | PC = (signed)0xBFC00000; | |
1809 | #endif SUBTARGET_3900 | |
1810 | return; | |
1811 | ||
1812 | case TLBModification: | |
1813 | case TLBLoad: | |
1814 | case TLBStore: | |
1815 | case AddressLoad: | |
1816 | case AddressStore: | |
1817 | case InstructionFetch: | |
1818 | case DataReference: | |
1819 | /* The following is so that the simulator will continue from the | |
1820 | exception handler address. */ | |
1821 | sim_engine_halt (SD, CPU, NULL, PC, | |
1822 | sim_stopped, SIM_SIGBUS); | |
1823 | ||
1824 | case ReservedInstruction: | |
1825 | case CoProcessorUnusable: | |
1826 | PC = EPC; | |
1827 | sim_engine_halt (SD, CPU, NULL, PC, | |
1828 | sim_stopped, SIM_SIGILL); | |
1829 | ||
1830 | case IntegerOverflow: | |
1831 | case FPE: | |
1832 | sim_engine_halt (SD, CPU, NULL, PC, | |
1833 | sim_stopped, SIM_SIGFPE); | |
1834 | ||
1835 | case BreakPoint: | |
1836 | sim_engine_halt (SD, CPU, NULL, PC, sim_stopped, SIM_SIGTRAP); | |
1837 | break; | |
1838 | ||
1839 | case SystemCall: | |
1840 | case Trap: | |
1841 | sim_engine_restart (SD, CPU, NULL, PC); | |
1842 | break; | |
1843 | ||
1844 | case Watch: | |
1845 | PC = EPC; | |
1846 | sim_engine_halt (SD, CPU, NULL, PC, | |
1847 | sim_stopped, SIM_SIGTRAP); | |
1848 | ||
1849 | default : /* Unknown internal exception */ | |
1850 | PC = EPC; | |
1851 | sim_engine_halt (SD, CPU, NULL, PC, | |
1852 | sim_stopped, SIM_SIGABRT); | |
1853 | ||
1854 | } | |
1855 | ||
1856 | case SimulatorFault: | |
1857 | { | |
1858 | va_list ap; | |
1859 | char *msg; | |
1860 | va_start(ap,exception); | |
1861 | msg = va_arg(ap,char *); | |
1862 | va_end(ap); | |
1863 | sim_engine_abort (SD, CPU, NULL_CIA, | |
1864 | "FATAL: Simulator error \"%s\"\n",msg); | |
1865 | } | |
1866 | } | |
1867 | ||
1868 | return; | |
1869 | } | |
1870 | ||
1871 | ||
1872 | ||
1873 | #if defined(WARN_RESULT) | |
1874 | /* Description from page A-26 of the "MIPS IV Instruction Set" manual (revision 3.1) */ | |
1875 | /* This function indicates that the result of the operation is | |
1876 | undefined. However, this should not affect the instruction | |
1877 | stream. All that is meant to happen is that the destination | |
1878 | register is set to an undefined result. To keep the simulator | |
1879 | simple, we just don't bother updating the destination register, so | |
1880 | the overall result will be undefined. If desired we can stop the | |
1881 | simulator by raising a pseudo-exception. */ | |
1882 | #define UndefinedResult() undefined_result (sd,cia) | |
1883 | static void | |
1884 | undefined_result(sd,cia) | |
1885 | SIM_DESC sd; | |
1886 | address_word cia; | |
1887 | { | |
1888 | sim_io_eprintf(sd,"UndefinedResult: PC = 0x%s\n",pr_addr(cia)); | |
1889 | #if 0 /* Disabled for the moment, since it actually happens a lot at the moment. */ | |
1890 | state |= simSTOP; | |
1891 | #endif | |
1892 | return; | |
1893 | } | |
1894 | #endif /* WARN_RESULT */ | |
1895 | ||
1896 | /*-- FPU support routines ---------------------------------------------------*/ | |
1897 | ||
1898 | /* Numbers are held in normalized form. The SINGLE and DOUBLE binary | |
1899 | formats conform to ANSI/IEEE Std 754-1985. */ | |
1900 | /* SINGLE precision floating: | |
1901 | * seeeeeeeefffffffffffffffffffffff | |
1902 | * s = 1bit = sign | |
1903 | * e = 8bits = exponent | |
1904 | * f = 23bits = fraction | |
1905 | */ | |
1906 | /* SINGLE precision fixed: | |
1907 | * siiiiiiiiiiiiiiiiiiiiiiiiiiiiiii | |
1908 | * s = 1bit = sign | |
1909 | * i = 31bits = integer | |
1910 | */ | |
1911 | /* DOUBLE precision floating: | |
1912 | * seeeeeeeeeeeffffffffffffffffffffffffffffffffffffffffffffffffffff | |
1913 | * s = 1bit = sign | |
1914 | * e = 11bits = exponent | |
1915 | * f = 52bits = fraction | |
1916 | */ | |
1917 | /* DOUBLE precision fixed: | |
1918 | * siiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii | |
1919 | * s = 1bit = sign | |
1920 | * i = 63bits = integer | |
1921 | */ | |
1922 | ||
1923 | /* Extract sign-bit: */ | |
1924 | #define FP_S_s(v) (((v) & ((unsigned)1 << 31)) ? 1 : 0) | |
1925 | #define FP_D_s(v) (((v) & ((uword64)1 << 63)) ? 1 : 0) | |
1926 | /* Extract biased exponent: */ | |
1927 | #define FP_S_be(v) (((v) >> 23) & 0xFF) | |
1928 | #define FP_D_be(v) (((v) >> 52) & 0x7FF) | |
1929 | /* Extract unbiased Exponent: */ | |
1930 | #define FP_S_e(v) (FP_S_be(v) - 0x7F) | |
1931 | #define FP_D_e(v) (FP_D_be(v) - 0x3FF) | |
1932 | /* Extract complete fraction field: */ | |
1933 | #define FP_S_f(v) ((v) & ~((unsigned)0x1FF << 23)) | |
1934 | #define FP_D_f(v) ((v) & ~((uword64)0xFFF << 52)) | |
1935 | /* Extract numbered fraction bit: */ | |
1936 | #define FP_S_fb(b,v) (((v) & (1 << (23 - (b)))) ? 1 : 0) | |
1937 | #define FP_D_fb(b,v) (((v) & (1 << (52 - (b)))) ? 1 : 0) | |
1938 | ||
1939 | /* Explicit QNaN values used when value required: */ | |
1940 | #define FPQNaN_SINGLE (0x7FBFFFFF) | |
1941 | #define FPQNaN_WORD (0x7FFFFFFF) | |
1942 | #define FPQNaN_DOUBLE (((uword64)0x7FF7FFFF << 32) | 0xFFFFFFFF) | |
1943 | #define FPQNaN_LONG (((uword64)0x7FFFFFFF << 32) | 0xFFFFFFFF) | |
1944 | ||
1945 | /* Explicit Infinity values used when required: */ | |
1946 | #define FPINF_SINGLE (0x7F800000) | |
1947 | #define FPINF_DOUBLE (((uword64)0x7FF00000 << 32) | 0x00000000) | |
1948 | ||
1949 | #define RMMODE(v) (((v) == FP_RM_NEAREST) ? "Round" : (((v) == FP_RM_TOZERO) ? "Trunc" : (((v) == FP_RM_TOPINF) ? "Ceil" : "Floor"))) | |
1950 | #define DOFMT(v) (((v) == fmt_single) ? "single" : (((v) == fmt_double) ? "double" : (((v) == fmt_word) ? "word" : (((v) == fmt_long) ? "long" : (((v) == fmt_unknown) ? "<unknown>" : (((v) == fmt_uninterpreted) ? "<uninterpreted>" : (((v) == fmt_uninterpreted_32) ? "<uninterpreted_32>" : (((v) == fmt_uninterpreted_64) ? "<uninterpreted_64>" : "<format error>")))))))) | |
1951 | ||
1952 | uword64 | |
1953 | value_fpr (SIM_DESC sd, | |
1954 | sim_cpu *cpu, | |
1955 | address_word cia, | |
1956 | int fpr, | |
1957 | FP_formats fmt) | |
1958 | { | |
1959 | uword64 value = 0; | |
1960 | int err = 0; | |
1961 | ||
1962 | /* Treat unused register values, as fixed-point 64bit values: */ | |
1963 | if ((fmt == fmt_uninterpreted) || (fmt == fmt_unknown)) | |
1964 | #if 1 | |
1965 | /* If request to read data as "uninterpreted", then use the current | |
1966 | encoding: */ | |
1967 | fmt = FPR_STATE[fpr]; | |
1968 | #else | |
1969 | fmt = fmt_long; | |
1970 | #endif | |
1971 | ||
1972 | /* For values not yet accessed, set to the desired format: */ | |
1973 | if (FPR_STATE[fpr] == fmt_uninterpreted) { | |
1974 | FPR_STATE[fpr] = fmt; | |
1975 | #ifdef DEBUG | |
1976 | printf("DBG: Register %d was fmt_uninterpreted. Now %s\n",fpr,DOFMT(fmt)); | |
1977 | #endif /* DEBUG */ | |
1978 | } | |
1979 | if (fmt != FPR_STATE[fpr]) { | |
1980 | sim_io_eprintf(sd,"FPR %d (format %s) being accessed with format %s - setting to unknown (PC = 0x%s)\n",fpr,DOFMT(FPR_STATE[fpr]),DOFMT(fmt),pr_addr(cia)); | |
1981 | FPR_STATE[fpr] = fmt_unknown; | |
1982 | } | |
1983 | ||
1984 | if (FPR_STATE[fpr] == fmt_unknown) { | |
1985 | /* Set QNaN value: */ | |
1986 | switch (fmt) { | |
1987 | case fmt_single: | |
1988 | value = FPQNaN_SINGLE; | |
1989 | break; | |
1990 | ||
1991 | case fmt_double: | |
1992 | value = FPQNaN_DOUBLE; | |
1993 | break; | |
1994 | ||
1995 | case fmt_word: | |
1996 | value = FPQNaN_WORD; | |
1997 | break; | |
1998 | ||
1999 | case fmt_long: | |
2000 | value = FPQNaN_LONG; | |
2001 | break; | |
2002 | ||
2003 | default: | |
2004 | err = -1; | |
2005 | break; | |
2006 | } | |
2007 | } else if (SizeFGR() == 64) { | |
2008 | switch (fmt) { | |
2009 | case fmt_single: | |
2010 | case fmt_word: | |
2011 | value = (FGR[fpr] & 0xFFFFFFFF); | |
2012 | break; | |
2013 | ||
2014 | case fmt_uninterpreted: | |
2015 | case fmt_double: | |
2016 | case fmt_long: | |
2017 | value = FGR[fpr]; | |
2018 | break; | |
2019 | ||
2020 | default : | |
2021 | err = -1; | |
2022 | break; | |
2023 | } | |
2024 | } else { | |
2025 | switch (fmt) { | |
2026 | case fmt_single: | |
2027 | case fmt_word: | |
2028 | value = (FGR[fpr] & 0xFFFFFFFF); | |
2029 | break; | |
2030 | ||
2031 | case fmt_uninterpreted: | |
2032 | case fmt_double: | |
2033 | case fmt_long: | |
2034 | if ((fpr & 1) == 0) { /* even registers only */ | |
2035 | #ifdef DEBUG | |
2036 | printf("DBG: ValueFPR: FGR[%d] = %s, FGR[%d] = %s\n", | |
2037 | fpr+1, pr_uword64( (uword64) FGR[fpr+1] ), | |
2038 | fpr, pr_uword64( (uword64) FGR[fpr] )); | |
2039 | #endif | |
2040 | value = ((((uword64)FGR[fpr+1]) << 32) | (FGR[fpr] & 0xFFFFFFFF)); | |
2041 | } else { | |
2042 | SignalException(ReservedInstruction,0); | |
2043 | } | |
2044 | break; | |
2045 | ||
2046 | default : | |
2047 | err = -1; | |
2048 | break; | |
2049 | } | |
2050 | } | |
2051 | ||
2052 | if (err) | |
2053 | SignalExceptionSimulatorFault ("Unrecognised FP format in ValueFPR()"); | |
2054 | ||
2055 | #ifdef DEBUG | |
2056 | printf("DBG: ValueFPR: fpr = %d, fmt = %s, value = 0x%s : PC = 0x%s : SizeFGR() = %d\n",fpr,DOFMT(fmt),pr_uword64(value),pr_addr(cia),SizeFGR()); | |
2057 | #endif /* DEBUG */ | |
2058 | ||
2059 | return(value); | |
2060 | } | |
2061 | ||
2062 | void | |
2063 | store_fpr (SIM_DESC sd, | |
2064 | sim_cpu *cpu, | |
2065 | address_word cia, | |
2066 | int fpr, | |
2067 | FP_formats fmt, | |
2068 | uword64 value) | |
2069 | { | |
2070 | int err = 0; | |
2071 | ||
2072 | #ifdef DEBUG | |
2073 | printf("DBG: StoreFPR: fpr = %d, fmt = %s, value = 0x%s : PC = 0x%s : SizeFGR() = %d,\n",fpr,DOFMT(fmt),pr_uword64(value),pr_addr(cia),SizeFGR()); | |
2074 | #endif /* DEBUG */ | |
2075 | ||
2076 | if (SizeFGR() == 64) { | |
2077 | switch (fmt) { | |
2078 | case fmt_uninterpreted_32: | |
2079 | fmt = fmt_uninterpreted; | |
2080 | case fmt_single : | |
2081 | case fmt_word : | |
a3027dd7 FCE |
2082 | if (STATE_VERBOSE_P(SD)) |
2083 | sim_io_eprintf (SD, "Warning: PC 0x%s: interp.c store_fpr DEADCODE\n", | |
2084 | pr_addr(cia)); | |
c906108c SS |
2085 | FGR[fpr] = (((uword64)0xDEADC0DE << 32) | (value & 0xFFFFFFFF)); |
2086 | FPR_STATE[fpr] = fmt; | |
2087 | break; | |
2088 | ||
2089 | case fmt_uninterpreted_64: | |
2090 | fmt = fmt_uninterpreted; | |
2091 | case fmt_uninterpreted: | |
2092 | case fmt_double : | |
2093 | case fmt_long : | |
2094 | FGR[fpr] = value; | |
2095 | FPR_STATE[fpr] = fmt; | |
2096 | break; | |
2097 | ||
2098 | default : | |
2099 | FPR_STATE[fpr] = fmt_unknown; | |
2100 | err = -1; | |
2101 | break; | |
2102 | } | |
2103 | } else { | |
2104 | switch (fmt) { | |
2105 | case fmt_uninterpreted_32: | |
2106 | fmt = fmt_uninterpreted; | |
2107 | case fmt_single : | |
2108 | case fmt_word : | |
2109 | FGR[fpr] = (value & 0xFFFFFFFF); | |
2110 | FPR_STATE[fpr] = fmt; | |
2111 | break; | |
2112 | ||
2113 | case fmt_uninterpreted_64: | |
2114 | fmt = fmt_uninterpreted; | |
2115 | case fmt_uninterpreted: | |
2116 | case fmt_double : | |
2117 | case fmt_long : | |
2118 | if ((fpr & 1) == 0) { /* even register number only */ | |
2119 | FGR[fpr+1] = (value >> 32); | |
2120 | FGR[fpr] = (value & 0xFFFFFFFF); | |
2121 | FPR_STATE[fpr + 1] = fmt; | |
2122 | FPR_STATE[fpr] = fmt; | |
2123 | } else { | |
2124 | FPR_STATE[fpr] = fmt_unknown; | |
2125 | FPR_STATE[fpr + 1] = fmt_unknown; | |
2126 | SignalException(ReservedInstruction,0); | |
2127 | } | |
2128 | break; | |
2129 | ||
2130 | default : | |
2131 | FPR_STATE[fpr] = fmt_unknown; | |
2132 | err = -1; | |
2133 | break; | |
2134 | } | |
2135 | } | |
2136 | #if defined(WARN_RESULT) | |
2137 | else | |
2138 | UndefinedResult(); | |
2139 | #endif /* WARN_RESULT */ | |
2140 | ||
2141 | if (err) | |
2142 | SignalExceptionSimulatorFault ("Unrecognised FP format in StoreFPR()"); | |
2143 | ||
2144 | #ifdef DEBUG | |
2145 | printf("DBG: StoreFPR: fpr[%d] = 0x%s (format %s)\n",fpr,pr_uword64(FGR[fpr]),DOFMT(fmt)); | |
2146 | #endif /* DEBUG */ | |
2147 | ||
2148 | return; | |
2149 | } | |
2150 | ||
2151 | int | |
2152 | NaN(op,fmt) | |
2153 | uword64 op; | |
2154 | FP_formats fmt; | |
2155 | { | |
2156 | int boolean = 0; | |
2157 | switch (fmt) { | |
2158 | case fmt_single: | |
2159 | case fmt_word: | |
2160 | { | |
2161 | sim_fpu wop; | |
2162 | sim_fpu_32to (&wop, op); | |
2163 | boolean = sim_fpu_is_nan (&wop); | |
2164 | break; | |
2165 | } | |
2166 | case fmt_double: | |
2167 | case fmt_long: | |
2168 | { | |
2169 | sim_fpu wop; | |
2170 | sim_fpu_64to (&wop, op); | |
2171 | boolean = sim_fpu_is_nan (&wop); | |
2172 | break; | |
2173 | } | |
2174 | default: | |
2175 | fprintf (stderr, "Bad switch\n"); | |
2176 | abort (); | |
2177 | } | |
2178 | ||
2179 | #ifdef DEBUG | |
2180 | printf("DBG: NaN: returning %d for 0x%s (format = %s)\n",boolean,pr_addr(op),DOFMT(fmt)); | |
2181 | #endif /* DEBUG */ | |
2182 | ||
2183 | return(boolean); | |
2184 | } | |
2185 | ||
2186 | int | |
2187 | Infinity(op,fmt) | |
2188 | uword64 op; | |
2189 | FP_formats fmt; | |
2190 | { | |
2191 | int boolean = 0; | |
2192 | ||
2193 | #ifdef DEBUG | |
2194 | printf("DBG: Infinity: format %s 0x%s\n",DOFMT(fmt),pr_addr(op)); | |
2195 | #endif /* DEBUG */ | |
2196 | ||
2197 | switch (fmt) { | |
2198 | case fmt_single: | |
2199 | { | |
2200 | sim_fpu wop; | |
2201 | sim_fpu_32to (&wop, op); | |
2202 | boolean = sim_fpu_is_infinity (&wop); | |
2203 | break; | |
2204 | } | |
2205 | case fmt_double: | |
2206 | { | |
2207 | sim_fpu wop; | |
2208 | sim_fpu_64to (&wop, op); | |
2209 | boolean = sim_fpu_is_infinity (&wop); | |
2210 | break; | |
2211 | } | |
2212 | default: | |
2213 | printf("DBG: TODO: unrecognised format (%s) for Infinity check\n",DOFMT(fmt)); | |
2214 | break; | |
2215 | } | |
2216 | ||
2217 | #ifdef DEBUG | |
2218 | printf("DBG: Infinity: returning %d for 0x%s (format = %s)\n",boolean,pr_addr(op),DOFMT(fmt)); | |
2219 | #endif /* DEBUG */ | |
2220 | ||
2221 | return(boolean); | |
2222 | } | |
2223 | ||
2224 | int | |
2225 | Less(op1,op2,fmt) | |
2226 | uword64 op1; | |
2227 | uword64 op2; | |
2228 | FP_formats fmt; | |
2229 | { | |
2230 | int boolean = 0; | |
2231 | ||
2232 | /* Argument checking already performed by the FPCOMPARE code */ | |
2233 | ||
2234 | #ifdef DEBUG | |
2235 | printf("DBG: Less: %s: op1 = 0x%s : op2 = 0x%s\n",DOFMT(fmt),pr_addr(op1),pr_addr(op2)); | |
2236 | #endif /* DEBUG */ | |
2237 | ||
2238 | /* The format type should already have been checked: */ | |
2239 | switch (fmt) { | |
2240 | case fmt_single: | |
2241 | { | |
2242 | sim_fpu wop1; | |
2243 | sim_fpu wop2; | |
2244 | sim_fpu_32to (&wop1, op1); | |
2245 | sim_fpu_32to (&wop2, op2); | |
2246 | boolean = sim_fpu_is_lt (&wop1, &wop2); | |
2247 | break; | |
2248 | } | |
2249 | case fmt_double: | |
2250 | { | |
2251 | sim_fpu wop1; | |
2252 | sim_fpu wop2; | |
2253 | sim_fpu_64to (&wop1, op1); | |
2254 | sim_fpu_64to (&wop2, op2); | |
2255 | boolean = sim_fpu_is_lt (&wop1, &wop2); | |
2256 | break; | |
2257 | } | |
2258 | default: | |
2259 | fprintf (stderr, "Bad switch\n"); | |
2260 | abort (); | |
2261 | } | |
2262 | ||
2263 | #ifdef DEBUG | |
2264 | printf("DBG: Less: returning %d (format = %s)\n",boolean,DOFMT(fmt)); | |
2265 | #endif /* DEBUG */ | |
2266 | ||
2267 | return(boolean); | |
2268 | } | |
2269 | ||
2270 | int | |
2271 | Equal(op1,op2,fmt) | |
2272 | uword64 op1; | |
2273 | uword64 op2; | |
2274 | FP_formats fmt; | |
2275 | { | |
2276 | int boolean = 0; | |
2277 | ||
2278 | /* Argument checking already performed by the FPCOMPARE code */ | |
2279 | ||
2280 | #ifdef DEBUG | |
2281 | printf("DBG: Equal: %s: op1 = 0x%s : op2 = 0x%s\n",DOFMT(fmt),pr_addr(op1),pr_addr(op2)); | |
2282 | #endif /* DEBUG */ | |
2283 | ||
2284 | /* The format type should already have been checked: */ | |
2285 | switch (fmt) { | |
2286 | case fmt_single: | |
2287 | { | |
2288 | sim_fpu wop1; | |
2289 | sim_fpu wop2; | |
2290 | sim_fpu_32to (&wop1, op1); | |
2291 | sim_fpu_32to (&wop2, op2); | |
2292 | boolean = sim_fpu_is_eq (&wop1, &wop2); | |
2293 | break; | |
2294 | } | |
2295 | case fmt_double: | |
2296 | { | |
2297 | sim_fpu wop1; | |
2298 | sim_fpu wop2; | |
2299 | sim_fpu_64to (&wop1, op1); | |
2300 | sim_fpu_64to (&wop2, op2); | |
2301 | boolean = sim_fpu_is_eq (&wop1, &wop2); | |
2302 | break; | |
2303 | } | |
2304 | default: | |
2305 | fprintf (stderr, "Bad switch\n"); | |
2306 | abort (); | |
2307 | } | |
2308 | ||
2309 | #ifdef DEBUG | |
2310 | printf("DBG: Equal: returning %d (format = %s)\n",boolean,DOFMT(fmt)); | |
2311 | #endif /* DEBUG */ | |
2312 | ||
2313 | return(boolean); | |
2314 | } | |
2315 | ||
2316 | uword64 | |
2317 | AbsoluteValue(op,fmt) | |
2318 | uword64 op; | |
2319 | FP_formats fmt; | |
2320 | { | |
2321 | uword64 result = 0; | |
2322 | ||
2323 | #ifdef DEBUG | |
2324 | printf("DBG: AbsoluteValue: %s: op = 0x%s\n",DOFMT(fmt),pr_addr(op)); | |
2325 | #endif /* DEBUG */ | |
2326 | ||
2327 | /* The format type should already have been checked: */ | |
2328 | switch (fmt) { | |
2329 | case fmt_single: | |
2330 | { | |
2331 | sim_fpu wop; | |
2332 | unsigned32 ans; | |
2333 | sim_fpu_32to (&wop, op); | |
2334 | sim_fpu_abs (&wop, &wop); | |
2335 | sim_fpu_to32 (&ans, &wop); | |
2336 | result = ans; | |
2337 | break; | |
2338 | } | |
2339 | case fmt_double: | |
2340 | { | |
2341 | sim_fpu wop; | |
2342 | unsigned64 ans; | |
2343 | sim_fpu_64to (&wop, op); | |
2344 | sim_fpu_abs (&wop, &wop); | |
2345 | sim_fpu_to64 (&ans, &wop); | |
2346 | result = ans; | |
2347 | break; | |
2348 | } | |
2349 | default: | |
2350 | fprintf (stderr, "Bad switch\n"); | |
2351 | abort (); | |
2352 | } | |
2353 | ||
2354 | return(result); | |
2355 | } | |
2356 | ||
2357 | uword64 | |
2358 | Negate(op,fmt) | |
2359 | uword64 op; | |
2360 | FP_formats fmt; | |
2361 | { | |
2362 | uword64 result = 0; | |
2363 | ||
2364 | #ifdef DEBUG | |
2365 | printf("DBG: Negate: %s: op = 0x%s\n",DOFMT(fmt),pr_addr(op)); | |
2366 | #endif /* DEBUG */ | |
2367 | ||
2368 | /* The format type should already have been checked: */ | |
2369 | switch (fmt) { | |
2370 | case fmt_single: | |
2371 | { | |
2372 | sim_fpu wop; | |
2373 | unsigned32 ans; | |
2374 | sim_fpu_32to (&wop, op); | |
2375 | sim_fpu_neg (&wop, &wop); | |
2376 | sim_fpu_to32 (&ans, &wop); | |
2377 | result = ans; | |
2378 | break; | |
2379 | } | |
2380 | case fmt_double: | |
2381 | { | |
2382 | sim_fpu wop; | |
2383 | unsigned64 ans; | |
2384 | sim_fpu_64to (&wop, op); | |
2385 | sim_fpu_neg (&wop, &wop); | |
2386 | sim_fpu_to64 (&ans, &wop); | |
2387 | result = ans; | |
2388 | break; | |
2389 | } | |
2390 | default: | |
2391 | fprintf (stderr, "Bad switch\n"); | |
2392 | abort (); | |
2393 | } | |
2394 | ||
2395 | return(result); | |
2396 | } | |
2397 | ||
2398 | uword64 | |
2399 | Add(op1,op2,fmt) | |
2400 | uword64 op1; | |
2401 | uword64 op2; | |
2402 | FP_formats fmt; | |
2403 | { | |
2404 | uword64 result = 0; | |
2405 | ||
2406 | #ifdef DEBUG | |
2407 | printf("DBG: Add: %s: op1 = 0x%s : op2 = 0x%s\n",DOFMT(fmt),pr_addr(op1),pr_addr(op2)); | |
2408 | #endif /* DEBUG */ | |
2409 | ||
2410 | /* The registers must specify FPRs valid for operands of type | |
2411 | "fmt". If they are not valid, the result is undefined. */ | |
2412 | ||
2413 | /* The format type should already have been checked: */ | |
2414 | switch (fmt) { | |
2415 | case fmt_single: | |
2416 | { | |
2417 | sim_fpu wop1; | |
2418 | sim_fpu wop2; | |
2419 | sim_fpu ans; | |
2420 | unsigned32 res; | |
2421 | sim_fpu_32to (&wop1, op1); | |
2422 | sim_fpu_32to (&wop2, op2); | |
2423 | sim_fpu_add (&ans, &wop1, &wop2); | |
2424 | sim_fpu_to32 (&res, &ans); | |
2425 | result = res; | |
2426 | break; | |
2427 | } | |
2428 | case fmt_double: | |
2429 | { | |
2430 | sim_fpu wop1; | |
2431 | sim_fpu wop2; | |
2432 | sim_fpu ans; | |
2433 | unsigned64 res; | |
2434 | sim_fpu_64to (&wop1, op1); | |
2435 | sim_fpu_64to (&wop2, op2); | |
2436 | sim_fpu_add (&ans, &wop1, &wop2); | |
2437 | sim_fpu_to64 (&res, &ans); | |
2438 | result = res; | |
2439 | break; | |
2440 | } | |
2441 | default: | |
2442 | fprintf (stderr, "Bad switch\n"); | |
2443 | abort (); | |
2444 | } | |
2445 | ||
2446 | #ifdef DEBUG | |
2447 | printf("DBG: Add: returning 0x%s (format = %s)\n",pr_addr(result),DOFMT(fmt)); | |
2448 | #endif /* DEBUG */ | |
2449 | ||
2450 | return(result); | |
2451 | } | |
2452 | ||
2453 | uword64 | |
2454 | Sub(op1,op2,fmt) | |
2455 | uword64 op1; | |
2456 | uword64 op2; | |
2457 | FP_formats fmt; | |
2458 | { | |
2459 | uword64 result = 0; | |
2460 | ||
2461 | #ifdef DEBUG | |
2462 | printf("DBG: Sub: %s: op1 = 0x%s : op2 = 0x%s\n",DOFMT(fmt),pr_addr(op1),pr_addr(op2)); | |
2463 | #endif /* DEBUG */ | |
2464 | ||
2465 | /* The registers must specify FPRs valid for operands of type | |
2466 | "fmt". If they are not valid, the result is undefined. */ | |
2467 | ||
2468 | /* The format type should already have been checked: */ | |
2469 | switch (fmt) { | |
2470 | case fmt_single: | |
2471 | { | |
2472 | sim_fpu wop1; | |
2473 | sim_fpu wop2; | |
2474 | sim_fpu ans; | |
2475 | unsigned32 res; | |
2476 | sim_fpu_32to (&wop1, op1); | |
2477 | sim_fpu_32to (&wop2, op2); | |
2478 | sim_fpu_sub (&ans, &wop1, &wop2); | |
2479 | sim_fpu_to32 (&res, &ans); | |
2480 | result = res; | |
2481 | } | |
2482 | break; | |
2483 | case fmt_double: | |
2484 | { | |
2485 | sim_fpu wop1; | |
2486 | sim_fpu wop2; | |
2487 | sim_fpu ans; | |
2488 | unsigned64 res; | |
2489 | sim_fpu_64to (&wop1, op1); | |
2490 | sim_fpu_64to (&wop2, op2); | |
2491 | sim_fpu_sub (&ans, &wop1, &wop2); | |
2492 | sim_fpu_to64 (&res, &ans); | |
2493 | result = res; | |
2494 | } | |
2495 | break; | |
2496 | default: | |
2497 | fprintf (stderr, "Bad switch\n"); | |
2498 | abort (); | |
2499 | } | |
2500 | ||
2501 | #ifdef DEBUG | |
2502 | printf("DBG: Sub: returning 0x%s (format = %s)\n",pr_addr(result),DOFMT(fmt)); | |
2503 | #endif /* DEBUG */ | |
2504 | ||
2505 | return(result); | |
2506 | } | |
2507 | ||
2508 | uword64 | |
2509 | Multiply(op1,op2,fmt) | |
2510 | uword64 op1; | |
2511 | uword64 op2; | |
2512 | FP_formats fmt; | |
2513 | { | |
2514 | uword64 result = 0; | |
2515 | ||
2516 | #ifdef DEBUG | |
2517 | printf("DBG: Multiply: %s: op1 = 0x%s : op2 = 0x%s\n",DOFMT(fmt),pr_addr(op1),pr_addr(op2)); | |
2518 | #endif /* DEBUG */ | |
2519 | ||
2520 | /* The registers must specify FPRs valid for operands of type | |
2521 | "fmt". If they are not valid, the result is undefined. */ | |
2522 | ||
2523 | /* The format type should already have been checked: */ | |
2524 | switch (fmt) { | |
2525 | case fmt_single: | |
2526 | { | |
2527 | sim_fpu wop1; | |
2528 | sim_fpu wop2; | |
2529 | sim_fpu ans; | |
2530 | unsigned32 res; | |
2531 | sim_fpu_32to (&wop1, op1); | |
2532 | sim_fpu_32to (&wop2, op2); | |
2533 | sim_fpu_mul (&ans, &wop1, &wop2); | |
2534 | sim_fpu_to32 (&res, &ans); | |
2535 | result = res; | |
2536 | break; | |
2537 | } | |
2538 | case fmt_double: | |
2539 | { | |
2540 | sim_fpu wop1; | |
2541 | sim_fpu wop2; | |
2542 | sim_fpu ans; | |
2543 | unsigned64 res; | |
2544 | sim_fpu_64to (&wop1, op1); | |
2545 | sim_fpu_64to (&wop2, op2); | |
2546 | sim_fpu_mul (&ans, &wop1, &wop2); | |
2547 | sim_fpu_to64 (&res, &ans); | |
2548 | result = res; | |
2549 | break; | |
2550 | } | |
2551 | default: | |
2552 | fprintf (stderr, "Bad switch\n"); | |
2553 | abort (); | |
2554 | } | |
2555 | ||
2556 | #ifdef DEBUG | |
2557 | printf("DBG: Multiply: returning 0x%s (format = %s)\n",pr_addr(result),DOFMT(fmt)); | |
2558 | #endif /* DEBUG */ | |
2559 | ||
2560 | return(result); | |
2561 | } | |
2562 | ||
2563 | uword64 | |
2564 | Divide(op1,op2,fmt) | |
2565 | uword64 op1; | |
2566 | uword64 op2; | |
2567 | FP_formats fmt; | |
2568 | { | |
2569 | uword64 result = 0; | |
2570 | ||
2571 | #ifdef DEBUG | |
2572 | printf("DBG: Divide: %s: op1 = 0x%s : op2 = 0x%s\n",DOFMT(fmt),pr_addr(op1),pr_addr(op2)); | |
2573 | #endif /* DEBUG */ | |
2574 | ||
2575 | /* The registers must specify FPRs valid for operands of type | |
2576 | "fmt". If they are not valid, the result is undefined. */ | |
2577 | ||
2578 | /* The format type should already have been checked: */ | |
2579 | switch (fmt) { | |
2580 | case fmt_single: | |
2581 | { | |
2582 | sim_fpu wop1; | |
2583 | sim_fpu wop2; | |
2584 | sim_fpu ans; | |
2585 | unsigned32 res; | |
2586 | sim_fpu_32to (&wop1, op1); | |
2587 | sim_fpu_32to (&wop2, op2); | |
2588 | sim_fpu_div (&ans, &wop1, &wop2); | |
2589 | sim_fpu_to32 (&res, &ans); | |
2590 | result = res; | |
2591 | break; | |
2592 | } | |
2593 | case fmt_double: | |
2594 | { | |
2595 | sim_fpu wop1; | |
2596 | sim_fpu wop2; | |
2597 | sim_fpu ans; | |
2598 | unsigned64 res; | |
2599 | sim_fpu_64to (&wop1, op1); | |
2600 | sim_fpu_64to (&wop2, op2); | |
2601 | sim_fpu_div (&ans, &wop1, &wop2); | |
2602 | sim_fpu_to64 (&res, &ans); | |
2603 | result = res; | |
2604 | break; | |
2605 | } | |
2606 | default: | |
2607 | fprintf (stderr, "Bad switch\n"); | |
2608 | abort (); | |
2609 | } | |
2610 | ||
2611 | #ifdef DEBUG | |
2612 | printf("DBG: Divide: returning 0x%s (format = %s)\n",pr_addr(result),DOFMT(fmt)); | |
2613 | #endif /* DEBUG */ | |
2614 | ||
2615 | return(result); | |
2616 | } | |
2617 | ||
2618 | uword64 UNUSED | |
2619 | Recip(op,fmt) | |
2620 | uword64 op; | |
2621 | FP_formats fmt; | |
2622 | { | |
2623 | uword64 result = 0; | |
2624 | ||
2625 | #ifdef DEBUG | |
2626 | printf("DBG: Recip: %s: op = 0x%s\n",DOFMT(fmt),pr_addr(op)); | |
2627 | #endif /* DEBUG */ | |
2628 | ||
2629 | /* The registers must specify FPRs valid for operands of type | |
2630 | "fmt". If they are not valid, the result is undefined. */ | |
2631 | ||
2632 | /* The format type should already have been checked: */ | |
2633 | switch (fmt) { | |
2634 | case fmt_single: | |
2635 | { | |
2636 | sim_fpu wop; | |
2637 | sim_fpu ans; | |
2638 | unsigned32 res; | |
2639 | sim_fpu_32to (&wop, op); | |
2640 | sim_fpu_inv (&ans, &wop); | |
2641 | sim_fpu_to32 (&res, &ans); | |
2642 | result = res; | |
2643 | break; | |
2644 | } | |
2645 | case fmt_double: | |
2646 | { | |
2647 | sim_fpu wop; | |
2648 | sim_fpu ans; | |
2649 | unsigned64 res; | |
2650 | sim_fpu_64to (&wop, op); | |
2651 | sim_fpu_inv (&ans, &wop); | |
2652 | sim_fpu_to64 (&res, &ans); | |
2653 | result = res; | |
2654 | break; | |
2655 | } | |
2656 | default: | |
2657 | fprintf (stderr, "Bad switch\n"); | |
2658 | abort (); | |
2659 | } | |
2660 | ||
2661 | #ifdef DEBUG | |
2662 | printf("DBG: Recip: returning 0x%s (format = %s)\n",pr_addr(result),DOFMT(fmt)); | |
2663 | #endif /* DEBUG */ | |
2664 | ||
2665 | return(result); | |
2666 | } | |
2667 | ||
2668 | uword64 | |
2669 | SquareRoot(op,fmt) | |
2670 | uword64 op; | |
2671 | FP_formats fmt; | |
2672 | { | |
2673 | uword64 result = 0; | |
2674 | ||
2675 | #ifdef DEBUG | |
2676 | printf("DBG: SquareRoot: %s: op = 0x%s\n",DOFMT(fmt),pr_addr(op)); | |
2677 | #endif /* DEBUG */ | |
2678 | ||
2679 | /* The registers must specify FPRs valid for operands of type | |
2680 | "fmt". If they are not valid, the result is undefined. */ | |
2681 | ||
2682 | /* The format type should already have been checked: */ | |
2683 | switch (fmt) { | |
2684 | case fmt_single: | |
2685 | { | |
2686 | sim_fpu wop; | |
2687 | sim_fpu ans; | |
2688 | unsigned32 res; | |
2689 | sim_fpu_32to (&wop, op); | |
2690 | sim_fpu_sqrt (&ans, &wop); | |
2691 | sim_fpu_to32 (&res, &ans); | |
2692 | result = res; | |
2693 | break; | |
2694 | } | |
2695 | case fmt_double: | |
2696 | { | |
2697 | sim_fpu wop; | |
2698 | sim_fpu ans; | |
2699 | unsigned64 res; | |
2700 | sim_fpu_64to (&wop, op); | |
2701 | sim_fpu_sqrt (&ans, &wop); | |
2702 | sim_fpu_to64 (&res, &ans); | |
2703 | result = res; | |
2704 | break; | |
2705 | } | |
2706 | default: | |
2707 | fprintf (stderr, "Bad switch\n"); | |
2708 | abort (); | |
2709 | } | |
2710 | ||
2711 | #ifdef DEBUG | |
2712 | printf("DBG: SquareRoot: returning 0x%s (format = %s)\n",pr_addr(result),DOFMT(fmt)); | |
2713 | #endif /* DEBUG */ | |
2714 | ||
2715 | return(result); | |
2716 | } | |
2717 | ||
2718 | #if 0 | |
2719 | uword64 | |
2720 | Max (uword64 op1, | |
2721 | uword64 op2, | |
2722 | FP_formats fmt) | |
2723 | { | |
2724 | int cmp; | |
2725 | unsigned64 result; | |
2726 | ||
2727 | #ifdef DEBUG | |
2728 | printf("DBG: Max: %s: op1 = 0x%s : op2 = 0x%s\n",DOFMT(fmt),pr_addr(op1),pr_addr(op2)); | |
2729 | #endif /* DEBUG */ | |
2730 | ||
2731 | /* The registers must specify FPRs valid for operands of type | |
2732 | "fmt". If they are not valid, the result is undefined. */ | |
2733 | ||
2734 | /* The format type should already have been checked: */ | |
2735 | switch (fmt) | |
2736 | { | |
2737 | case fmt_single: | |
2738 | { | |
2739 | sim_fpu wop1; | |
2740 | sim_fpu wop2; | |
2741 | sim_fpu_32to (&wop1, op1); | |
2742 | sim_fpu_32to (&wop2, op2); | |
2743 | cmp = sim_fpu_cmp (&wop1, &wop2); | |
2744 | break; | |
2745 | } | |
2746 | case fmt_double: | |
2747 | { | |
2748 | sim_fpu wop1; | |
2749 | sim_fpu wop2; | |
2750 | sim_fpu_64to (&wop1, op1); | |
2751 | sim_fpu_64to (&wop2, op2); | |
2752 | cmp = sim_fpu_cmp (&wop1, &wop2); | |
2753 | break; | |
2754 | } | |
2755 | default: | |
2756 | fprintf (stderr, "Bad switch\n"); | |
2757 | abort (); | |
2758 | } | |
2759 | ||
2760 | switch (cmp) | |
2761 | { | |
2762 | case SIM_FPU_IS_SNAN: | |
2763 | case SIM_FPU_IS_QNAN: | |
2764 | result = op1; | |
2765 | case SIM_FPU_IS_NINF: | |
2766 | case SIM_FPU_IS_NNUMBER: | |
2767 | case SIM_FPU_IS_NDENORM: | |
2768 | case SIM_FPU_IS_NZERO: | |
2769 | result = op2; /* op1 - op2 < 0 */ | |
2770 | case SIM_FPU_IS_PINF: | |
2771 | case SIM_FPU_IS_PNUMBER: | |
2772 | case SIM_FPU_IS_PDENORM: | |
2773 | case SIM_FPU_IS_PZERO: | |
2774 | result = op1; /* op1 - op2 > 0 */ | |
2775 | default: | |
2776 | fprintf (stderr, "Bad switch\n"); | |
2777 | abort (); | |
2778 | } | |
2779 | ||
2780 | #ifdef DEBUG | |
2781 | printf("DBG: Max: returning 0x%s (format = %s)\n",pr_addr(result),DOFMT(fmt)); | |
2782 | #endif /* DEBUG */ | |
2783 | ||
2784 | return(result); | |
2785 | } | |
2786 | #endif | |
2787 | ||
2788 | #if 0 | |
2789 | uword64 | |
2790 | Min (uword64 op1, | |
2791 | uword64 op2, | |
2792 | FP_formats fmt) | |
2793 | { | |
2794 | int cmp; | |
2795 | unsigned64 result; | |
2796 | ||
2797 | #ifdef DEBUG | |
2798 | printf("DBG: Min: %s: op1 = 0x%s : op2 = 0x%s\n",DOFMT(fmt),pr_addr(op1),pr_addr(op2)); | |
2799 | #endif /* DEBUG */ | |
2800 | ||
2801 | /* The registers must specify FPRs valid for operands of type | |
2802 | "fmt". If they are not valid, the result is undefined. */ | |
2803 | ||
2804 | /* The format type should already have been checked: */ | |
2805 | switch (fmt) | |
2806 | { | |
2807 | case fmt_single: | |
2808 | { | |
2809 | sim_fpu wop1; | |
2810 | sim_fpu wop2; | |
2811 | sim_fpu_32to (&wop1, op1); | |
2812 | sim_fpu_32to (&wop2, op2); | |
2813 | cmp = sim_fpu_cmp (&wop1, &wop2); | |
2814 | break; | |
2815 | } | |
2816 | case fmt_double: | |
2817 | { | |
2818 | sim_fpu wop1; | |
2819 | sim_fpu wop2; | |
2820 | sim_fpu_64to (&wop1, op1); | |
2821 | sim_fpu_64to (&wop2, op2); | |
2822 | cmp = sim_fpu_cmp (&wop1, &wop2); | |
2823 | break; | |
2824 | } | |
2825 | default: | |
2826 | fprintf (stderr, "Bad switch\n"); | |
2827 | abort (); | |
2828 | } | |
2829 | ||
2830 | switch (cmp) | |
2831 | { | |
2832 | case SIM_FPU_IS_SNAN: | |
2833 | case SIM_FPU_IS_QNAN: | |
2834 | result = op1; | |
2835 | case SIM_FPU_IS_NINF: | |
2836 | case SIM_FPU_IS_NNUMBER: | |
2837 | case SIM_FPU_IS_NDENORM: | |
2838 | case SIM_FPU_IS_NZERO: | |
2839 | result = op1; /* op1 - op2 < 0 */ | |
2840 | case SIM_FPU_IS_PINF: | |
2841 | case SIM_FPU_IS_PNUMBER: | |
2842 | case SIM_FPU_IS_PDENORM: | |
2843 | case SIM_FPU_IS_PZERO: | |
2844 | result = op2; /* op1 - op2 > 0 */ | |
2845 | default: | |
2846 | fprintf (stderr, "Bad switch\n"); | |
2847 | abort (); | |
2848 | } | |
2849 | ||
2850 | #ifdef DEBUG | |
2851 | printf("DBG: Min: returning 0x%s (format = %s)\n",pr_addr(result),DOFMT(fmt)); | |
2852 | #endif /* DEBUG */ | |
2853 | ||
2854 | return(result); | |
2855 | } | |
2856 | #endif | |
2857 | ||
2858 | uword64 | |
2859 | convert (SIM_DESC sd, | |
2860 | sim_cpu *cpu, | |
2861 | address_word cia, | |
2862 | int rm, | |
2863 | uword64 op, | |
2864 | FP_formats from, | |
2865 | FP_formats to) | |
2866 | { | |
2867 | sim_fpu wop; | |
2868 | sim_fpu_round round; | |
2869 | unsigned32 result32; | |
2870 | unsigned64 result64; | |
2871 | ||
2872 | #ifdef DEBUG | |
2873 | #if 0 /* FIXME: doesn't compile */ | |
2874 | printf("DBG: Convert: mode %s : op 0x%s : from %s : to %s : (PC = 0x%s)\n",RMMODE(rm),pr_addr(op),DOFMT(from),DOFMT(to),pr_addr(IPC)); | |
2875 | #endif | |
2876 | #endif /* DEBUG */ | |
2877 | ||
2878 | switch (rm) | |
2879 | { | |
2880 | case FP_RM_NEAREST: | |
2881 | /* Round result to nearest representable value. When two | |
2882 | representable values are equally near, round to the value | |
2883 | that has a least significant bit of zero (i.e. is even). */ | |
2884 | round = sim_fpu_round_near; | |
2885 | break; | |
2886 | case FP_RM_TOZERO: | |
2887 | /* Round result to the value closest to, and not greater in | |
2888 | magnitude than, the result. */ | |
2889 | round = sim_fpu_round_zero; | |
2890 | break; | |
2891 | case FP_RM_TOPINF: | |
2892 | /* Round result to the value closest to, and not less than, | |
2893 | the result. */ | |
2894 | round = sim_fpu_round_up; | |
2895 | break; | |
2896 | ||
2897 | case FP_RM_TOMINF: | |
2898 | /* Round result to the value closest to, and not greater than, | |
2899 | the result. */ | |
2900 | round = sim_fpu_round_down; | |
2901 | break; | |
2902 | default: | |
2903 | round = 0; | |
2904 | fprintf (stderr, "Bad switch\n"); | |
2905 | abort (); | |
2906 | } | |
2907 | ||
2908 | /* Convert the input to sim_fpu internal format */ | |
2909 | switch (from) | |
2910 | { | |
2911 | case fmt_double: | |
2912 | sim_fpu_64to (&wop, op); | |
2913 | break; | |
2914 | case fmt_single: | |
2915 | sim_fpu_32to (&wop, op); | |
2916 | break; | |
2917 | case fmt_word: | |
2918 | sim_fpu_i32to (&wop, op, round); | |
2919 | break; | |
2920 | case fmt_long: | |
2921 | sim_fpu_i64to (&wop, op, round); | |
2922 | break; | |
2923 | default: | |
2924 | fprintf (stderr, "Bad switch\n"); | |
2925 | abort (); | |
2926 | } | |
2927 | ||
2928 | /* Convert sim_fpu format into the output */ | |
2929 | /* The value WOP is converted to the destination format, rounding | |
2930 | using mode RM. When the destination is a fixed-point format, then | |
2931 | a source value of Infinity, NaN or one which would round to an | |
2932 | integer outside the fixed point range then an IEEE Invalid | |
2933 | Operation condition is raised. */ | |
2934 | switch (to) | |
2935 | { | |
2936 | case fmt_single: | |
2937 | sim_fpu_round_32 (&wop, round, 0); | |
2938 | sim_fpu_to32 (&result32, &wop); | |
2939 | result64 = result32; | |
2940 | break; | |
2941 | case fmt_double: | |
2942 | sim_fpu_round_64 (&wop, round, 0); | |
2943 | sim_fpu_to64 (&result64, &wop); | |
2944 | break; | |
2945 | case fmt_word: | |
2946 | sim_fpu_to32i (&result32, &wop, round); | |
2947 | result64 = result32; | |
2948 | break; | |
2949 | case fmt_long: | |
2950 | sim_fpu_to64i (&result64, &wop, round); | |
2951 | break; | |
2952 | default: | |
2953 | result64 = 0; | |
2954 | fprintf (stderr, "Bad switch\n"); | |
2955 | abort (); | |
2956 | } | |
2957 | ||
2958 | #ifdef DEBUG | |
2959 | printf("DBG: Convert: returning 0x%s (to format = %s)\n",pr_addr(result64),DOFMT(to)); | |
2960 | #endif /* DEBUG */ | |
2961 | ||
2962 | return(result64); | |
2963 | } | |
2964 | ||
2965 | ||
2966 | /*-- co-processor support routines ------------------------------------------*/ | |
2967 | ||
2968 | static int UNUSED | |
2969 | CoProcPresent(unsigned int coproc_number) | |
2970 | { | |
2971 | /* Return TRUE if simulator provides a model for the given co-processor number */ | |
2972 | return(0); | |
2973 | } | |
2974 | ||
2975 | void | |
2976 | cop_lw (SIM_DESC sd, | |
2977 | sim_cpu *cpu, | |
2978 | address_word cia, | |
2979 | int coproc_num, | |
2980 | int coproc_reg, | |
2981 | unsigned int memword) | |
2982 | { | |
2983 | switch (coproc_num) | |
2984 | { | |
2985 | case 1: | |
2986 | if (CURRENT_FLOATING_POINT == HARD_FLOATING_POINT) | |
2987 | { | |
2988 | #ifdef DEBUG | |
2989 | printf("DBG: COP_LW: memword = 0x%08X (uword64)memword = 0x%s\n",memword,pr_addr(memword)); | |
2990 | #endif | |
2991 | StoreFPR(coproc_reg,fmt_word,(uword64)memword); | |
2992 | FPR_STATE[coproc_reg] = fmt_uninterpreted; | |
2993 | break; | |
2994 | } | |
2995 | ||
2996 | default: | |
2997 | #if 0 /* this should be controlled by a configuration option */ | |
2998 | sim_io_printf(sd,"COP_LW(%d,%d,0x%08X) at PC = 0x%s : TODO (architecture specific)\n",coproc_num,coproc_reg,memword,pr_addr(cia)); | |
2999 | #endif | |
3000 | break; | |
3001 | } | |
3002 | ||
3003 | return; | |
3004 | } | |
3005 | ||
3006 | void | |
3007 | cop_ld (SIM_DESC sd, | |
3008 | sim_cpu *cpu, | |
3009 | address_word cia, | |
3010 | int coproc_num, | |
3011 | int coproc_reg, | |
3012 | uword64 memword) | |
3013 | { | |
3014 | ||
3015 | #ifdef DEBUG | |
3016 | printf("DBG: COP_LD: coproc_num = %d, coproc_reg = %d, value = 0x%s : PC = 0x%s\n", coproc_num, coproc_reg, pr_uword64(memword), pr_addr(cia) ); | |
3017 | #endif | |
3018 | ||
3019 | switch (coproc_num) { | |
3020 | case 1: | |
3021 | if (CURRENT_FLOATING_POINT == HARD_FLOATING_POINT) | |
3022 | { | |
3023 | StoreFPR(coproc_reg,fmt_uninterpreted,memword); | |
3024 | break; | |
3025 | } | |
3026 | ||
3027 | default: | |
3028 | #if 0 /* this message should be controlled by a configuration option */ | |
3029 | sim_io_printf(sd,"COP_LD(%d,%d,0x%s) at PC = 0x%s : TODO (architecture specific)\n",coproc_num,coproc_reg,pr_addr(memword),pr_addr(cia)); | |
3030 | #endif | |
3031 | break; | |
3032 | } | |
3033 | ||
3034 | return; | |
3035 | } | |
3036 | ||
3037 | ||
3038 | ||
3039 | ||
3040 | unsigned int | |
3041 | cop_sw (SIM_DESC sd, | |
3042 | sim_cpu *cpu, | |
3043 | address_word cia, | |
3044 | int coproc_num, | |
3045 | int coproc_reg) | |
3046 | { | |
3047 | unsigned int value = 0; | |
3048 | ||
3049 | switch (coproc_num) | |
3050 | { | |
3051 | case 1: | |
3052 | if (CURRENT_FLOATING_POINT == HARD_FLOATING_POINT) | |
3053 | { | |
3054 | FP_formats hold; | |
3055 | hold = FPR_STATE[coproc_reg]; | |
3056 | FPR_STATE[coproc_reg] = fmt_word; | |
3057 | value = (unsigned int)ValueFPR(coproc_reg,fmt_uninterpreted); | |
3058 | FPR_STATE[coproc_reg] = hold; | |
3059 | break; | |
3060 | } | |
3061 | ||
3062 | default: | |
3063 | #if 0 /* should be controlled by configuration option */ | |
3064 | sim_io_printf(sd,"COP_SW(%d,%d) at PC = 0x%s : TODO (architecture specific)\n",coproc_num,coproc_reg,pr_addr(cia)); | |
3065 | #endif | |
3066 | break; | |
3067 | } | |
3068 | ||
3069 | return(value); | |
3070 | } | |
3071 | ||
3072 | uword64 | |
3073 | cop_sd (SIM_DESC sd, | |
3074 | sim_cpu *cpu, | |
3075 | address_word cia, | |
3076 | int coproc_num, | |
3077 | int coproc_reg) | |
3078 | { | |
3079 | uword64 value = 0; | |
3080 | switch (coproc_num) | |
3081 | { | |
3082 | case 1: | |
3083 | if (CURRENT_FLOATING_POINT == HARD_FLOATING_POINT) | |
3084 | { | |
3085 | value = ValueFPR(coproc_reg,fmt_uninterpreted); | |
3086 | break; | |
3087 | } | |
3088 | ||
3089 | default: | |
3090 | #if 0 /* should be controlled by configuration option */ | |
3091 | sim_io_printf(sd,"COP_SD(%d,%d) at PC = 0x%s : TODO (architecture specific)\n",coproc_num,coproc_reg,pr_addr(cia)); | |
3092 | #endif | |
3093 | break; | |
3094 | } | |
3095 | ||
3096 | return(value); | |
3097 | } | |
3098 | ||
3099 | ||
3100 | ||
3101 | ||
3102 | void | |
3103 | decode_coproc (SIM_DESC sd, | |
3104 | sim_cpu *cpu, | |
3105 | address_word cia, | |
3106 | unsigned int instruction) | |
3107 | { | |
3108 | int coprocnum = ((instruction >> 26) & 3); | |
3109 | ||
3110 | switch (coprocnum) | |
3111 | { | |
3112 | case 0: /* standard CPU control and cache registers */ | |
3113 | { | |
3114 | int code = ((instruction >> 21) & 0x1F); | |
3115 | int rt = ((instruction >> 16) & 0x1F); | |
3116 | int rd = ((instruction >> 11) & 0x1F); | |
3117 | int tail = instruction & 0x3ff; | |
3118 | /* R4000 Users Manual (second edition) lists the following CP0 | |
3119 | instructions: | |
3120 | CODE><-RT><RD-><--TAIL---> | |
3121 | DMFC0 Doubleword Move From CP0 (VR4100 = 01000000001tttttddddd00000000000) | |
3122 | DMTC0 Doubleword Move To CP0 (VR4100 = 01000000101tttttddddd00000000000) | |
3123 | MFC0 word Move From CP0 (VR4100 = 01000000000tttttddddd00000000000) | |
3124 | MTC0 word Move To CP0 (VR4100 = 01000000100tttttddddd00000000000) | |
3125 | TLBR Read Indexed TLB Entry (VR4100 = 01000010000000000000000000000001) | |
3126 | TLBWI Write Indexed TLB Entry (VR4100 = 01000010000000000000000000000010) | |
3127 | TLBWR Write Random TLB Entry (VR4100 = 01000010000000000000000000000110) | |
3128 | TLBP Probe TLB for Matching Entry (VR4100 = 01000010000000000000000000001000) | |
3129 | CACHE Cache operation (VR4100 = 101111bbbbbpppppiiiiiiiiiiiiiiii) | |
3130 | ERET Exception return (VR4100 = 01000010000000000000000000011000) | |
3131 | */ | |
4ce44c66 JM |
3132 | if (((code == 0x00) || (code == 0x04) /* MFC0 / MTC0 */ |
3133 | || (code == 0x01) || (code == 0x05)) /* DMFC0 / DMTC0 */ | |
3134 | && tail == 0) | |
c906108c | 3135 | { |
4ce44c66 JM |
3136 | /* Clear double/single coprocessor move bit. */ |
3137 | code &= ~1; | |
3138 | ||
3139 | /* M[TF]C0 (32 bits) | DM[TF]C0 (64 bits) */ | |
c906108c SS |
3140 | |
3141 | switch (rd) /* NOTEs: Standard CP0 registers */ | |
3142 | { | |
3143 | /* 0 = Index R4000 VR4100 VR4300 */ | |
3144 | /* 1 = Random R4000 VR4100 VR4300 */ | |
3145 | /* 2 = EntryLo0 R4000 VR4100 VR4300 */ | |
3146 | /* 3 = EntryLo1 R4000 VR4100 VR4300 */ | |
3147 | /* 4 = Context R4000 VR4100 VR4300 */ | |
3148 | /* 5 = PageMask R4000 VR4100 VR4300 */ | |
3149 | /* 6 = Wired R4000 VR4100 VR4300 */ | |
3150 | /* 8 = BadVAddr R4000 VR4100 VR4300 */ | |
3151 | /* 9 = Count R4000 VR4100 VR4300 */ | |
3152 | /* 10 = EntryHi R4000 VR4100 VR4300 */ | |
3153 | /* 11 = Compare R4000 VR4100 VR4300 */ | |
3154 | /* 12 = SR R4000 VR4100 VR4300 */ | |
3155 | #ifdef SUBTARGET_R3900 | |
3156 | case 3: | |
3157 | /* 3 = Config R3900 */ | |
3158 | case 7: | |
3159 | /* 7 = Cache R3900 */ | |
3160 | case 15: | |
3161 | /* 15 = PRID R3900 */ | |
3162 | ||
3163 | /* ignore */ | |
3164 | break; | |
3165 | ||
3166 | case 8: | |
3167 | /* 8 = BadVAddr R4000 VR4100 VR4300 */ | |
3168 | if (code == 0x00) | |
3169 | GPR[rt] = COP0_BADVADDR; | |
3170 | else | |
3171 | COP0_BADVADDR = GPR[rt]; | |
3172 | break; | |
3173 | ||
3174 | #endif /* SUBTARGET_R3900 */ | |
3175 | case 12: | |
3176 | if (code == 0x00) | |
3177 | GPR[rt] = SR; | |
3178 | else | |
3179 | SR = GPR[rt]; | |
3180 | break; | |
3181 | /* 13 = Cause R4000 VR4100 VR4300 */ | |
3182 | case 13: | |
3183 | if (code == 0x00) | |
3184 | GPR[rt] = CAUSE; | |
3185 | else | |
3186 | CAUSE = GPR[rt]; | |
3187 | break; | |
3188 | /* 14 = EPC R4000 VR4100 VR4300 */ | |
3189 | case 14: | |
3190 | if (code == 0x00) | |
3191 | GPR[rt] = (signed_word) (signed_address) EPC; | |
3192 | else | |
3193 | EPC = GPR[rt]; | |
3194 | break; | |
3195 | /* 15 = PRId R4000 VR4100 VR4300 */ | |
3196 | #ifdef SUBTARGET_R3900 | |
3197 | /* 16 = Debug */ | |
3198 | case 16: | |
3199 | if (code == 0x00) | |
3200 | GPR[rt] = Debug; | |
3201 | else | |
3202 | Debug = GPR[rt]; | |
3203 | break; | |
3204 | #else | |
3205 | /* 16 = Config R4000 VR4100 VR4300 */ | |
3206 | case 16: | |
3207 | if (code == 0x00) | |
3208 | GPR[rt] = C0_CONFIG; | |
3209 | else | |
3210 | C0_CONFIG = GPR[rt]; | |
3211 | break; | |
3212 | #endif | |
3213 | #ifdef SUBTARGET_R3900 | |
3214 | /* 17 = Debug */ | |
3215 | case 17: | |
3216 | if (code == 0x00) | |
3217 | GPR[rt] = DEPC; | |
3218 | else | |
3219 | DEPC = GPR[rt]; | |
3220 | break; | |
3221 | #else | |
3222 | /* 17 = LLAddr R4000 VR4100 VR4300 */ | |
3223 | #endif | |
3224 | /* 18 = WatchLo R4000 VR4100 VR4300 */ | |
3225 | /* 19 = WatchHi R4000 VR4100 VR4300 */ | |
3226 | /* 20 = XContext R4000 VR4100 VR4300 */ | |
3227 | /* 26 = PErr or ECC R4000 VR4100 VR4300 */ | |
3228 | /* 27 = CacheErr R4000 VR4100 */ | |
3229 | /* 28 = TagLo R4000 VR4100 VR4300 */ | |
3230 | /* 29 = TagHi R4000 VR4100 VR4300 */ | |
3231 | /* 30 = ErrorEPC R4000 VR4100 VR4300 */ | |
a3027dd7 FCE |
3232 | if (STATE_VERBOSE_P(SD)) |
3233 | sim_io_eprintf (SD, | |
e30db738 AC |
3234 | "Warning: PC 0x%lx:interp.c decode_coproc DEADC0DE\n", |
3235 | (unsigned long)cia); | |
c906108c SS |
3236 | GPR[rt] = 0xDEADC0DE; /* CPR[0,rd] */ |
3237 | /* CPR[0,rd] = GPR[rt]; */ | |
3238 | default: | |
3239 | if (code == 0x00) | |
3240 | GPR[rt] = (signed_word) (signed32) COP0_GPR[rd]; | |
3241 | else | |
3242 | COP0_GPR[rd] = GPR[rt]; | |
3243 | #if 0 | |
3244 | if (code == 0x00) | |
3245 | sim_io_printf(sd,"Warning: MFC0 %d,%d ignored, PC=%08x (architecture specific)\n",rt,rd, (unsigned)cia); | |
3246 | else | |
3247 | sim_io_printf(sd,"Warning: MTC0 %d,%d ignored, PC=%08x (architecture specific)\n",rt,rd, (unsigned)cia); | |
3248 | #endif | |
3249 | } | |
3250 | } | |
3251 | else if (code == 0x10 && (tail & 0x3f) == 0x18) | |
3252 | { | |
3253 | /* ERET */ | |
3254 | if (SR & status_ERL) | |
3255 | { | |
3256 | /* Oops, not yet available */ | |
3257 | sim_io_printf(sd,"Warning: ERET when SR[ERL] set not handled yet"); | |
3258 | PC = EPC; | |
3259 | SR &= ~status_ERL; | |
3260 | } | |
3261 | else | |
3262 | { | |
3263 | PC = EPC; | |
3264 | SR &= ~status_EXL; | |
3265 | } | |
3266 | } | |
3267 | else if (code == 0x10 && (tail & 0x3f) == 0x10) | |
3268 | { | |
3269 | /* RFE */ | |
3270 | #ifdef SUBTARGET_R3900 | |
3271 | /* TX39: Copy IEp/KUp -> IEc/KUc, and IEo/KUo -> IEp/KUp */ | |
3272 | ||
3273 | /* shift IE/KU history bits right */ | |
3274 | SR = LSMASKED32(SR, 31, 4) | LSINSERTED32(LSEXTRACTED32(SR, 5, 2), 3, 0); | |
3275 | ||
3276 | /* TODO: CACHE register */ | |
3277 | #endif /* SUBTARGET_R3900 */ | |
3278 | } | |
3279 | else if (code == 0x10 && (tail & 0x3f) == 0x1F) | |
3280 | { | |
3281 | /* DERET */ | |
3282 | Debug &= ~Debug_DM; | |
3283 | DELAYSLOT(); | |
3284 | DSPC = DEPC; | |
3285 | } | |
3286 | else | |
3287 | sim_io_eprintf(sd,"Unrecognised COP0 instruction 0x%08X at PC = 0x%s : No handler present\n",instruction,pr_addr(cia)); | |
3288 | /* TODO: When executing an ERET or RFE instruction we should | |
3289 | clear LLBIT, to ensure that any out-standing atomic | |
3290 | read/modify/write sequence fails. */ | |
3291 | } | |
3292 | break; | |
3293 | ||
3294 | case 2: /* co-processor 2 */ | |
3295 | { | |
3296 | int handle = 0; | |
3297 | ||
3298 | ||
3299 | if(! handle) | |
3300 | { | |
3301 | sim_io_eprintf(sd, "COP2 instruction 0x%08X at PC = 0x%s : No handler present\n", | |
3302 | instruction,pr_addr(cia)); | |
3303 | } | |
3304 | } | |
3305 | break; | |
3306 | ||
3307 | case 1: /* should not occur (FPU co-processor) */ | |
3308 | case 3: /* should not occur (FPU co-processor) */ | |
3309 | SignalException(ReservedInstruction,instruction); | |
3310 | break; | |
3311 | } | |
3312 | ||
3313 | return; | |
3314 | } | |
3315 | ||
3316 | ||
3317 | /* This code copied from gdb's utils.c. Would like to share this code, | |
3318 | but don't know of a common place where both could get to it. */ | |
3319 | ||
3320 | /* Temporary storage using circular buffer */ | |
3321 | #define NUMCELLS 16 | |
3322 | #define CELLSIZE 32 | |
3323 | static char* | |
3324 | get_cell (void) | |
3325 | { | |
3326 | static char buf[NUMCELLS][CELLSIZE]; | |
3327 | static int cell=0; | |
3328 | if (++cell>=NUMCELLS) cell=0; | |
3329 | return buf[cell]; | |
3330 | } | |
3331 | ||
3332 | /* Print routines to handle variable size regs, etc */ | |
3333 | ||
3334 | /* Eliminate warning from compiler on 32-bit systems */ | |
3335 | static int thirty_two = 32; | |
3336 | ||
3337 | char* | |
3338 | pr_addr(addr) | |
3339 | SIM_ADDR addr; | |
3340 | { | |
3341 | char *paddr_str=get_cell(); | |
3342 | switch (sizeof(addr)) | |
3343 | { | |
3344 | case 8: | |
3345 | sprintf(paddr_str,"%08lx%08lx", | |
3346 | (unsigned long)(addr>>thirty_two),(unsigned long)(addr&0xffffffff)); | |
3347 | break; | |
3348 | case 4: | |
3349 | sprintf(paddr_str,"%08lx",(unsigned long)addr); | |
3350 | break; | |
3351 | case 2: | |
3352 | sprintf(paddr_str,"%04x",(unsigned short)(addr&0xffff)); | |
3353 | break; | |
3354 | default: | |
3355 | sprintf(paddr_str,"%x",addr); | |
3356 | } | |
3357 | return paddr_str; | |
3358 | } | |
3359 | ||
3360 | char* | |
3361 | pr_uword64(addr) | |
3362 | uword64 addr; | |
3363 | { | |
3364 | char *paddr_str=get_cell(); | |
3365 | sprintf(paddr_str,"%08lx%08lx", | |
3366 | (unsigned long)(addr>>thirty_two),(unsigned long)(addr&0xffffffff)); | |
3367 | return paddr_str; | |
3368 | } | |
3369 | ||
3370 | ||
3371 | void | |
3372 | mips_core_signal (SIM_DESC sd, | |
3373 | sim_cpu *cpu, | |
3374 | sim_cia cia, | |
3375 | unsigned map, | |
3376 | int nr_bytes, | |
3377 | address_word addr, | |
3378 | transfer_type transfer, | |
3379 | sim_core_signals sig) | |
3380 | { | |
3381 | const char *copy = (transfer == read_transfer ? "read" : "write"); | |
3382 | address_word ip = CIA_ADDR (cia); | |
3383 | ||
3384 | switch (sig) | |
3385 | { | |
3386 | case sim_core_unmapped_signal: | |
3387 | sim_io_eprintf (sd, "mips-core: %d byte %s to unmapped address 0x%lx at 0x%lx\n", | |
3388 | nr_bytes, copy, | |
3389 | (unsigned long) addr, (unsigned long) ip); | |
3390 | COP0_BADVADDR = addr; | |
3391 | SignalExceptionDataReference(); | |
3392 | break; | |
3393 | ||
3394 | case sim_core_unaligned_signal: | |
3395 | sim_io_eprintf (sd, "mips-core: %d byte %s to unaligned address 0x%lx at 0x%lx\n", | |
3396 | nr_bytes, copy, | |
3397 | (unsigned long) addr, (unsigned long) ip); | |
3398 | COP0_BADVADDR = addr; | |
3399 | if(transfer == read_transfer) | |
3400 | SignalExceptionAddressLoad(); | |
3401 | else | |
3402 | SignalExceptionAddressStore(); | |
3403 | break; | |
3404 | ||
3405 | default: | |
3406 | sim_engine_abort (sd, cpu, cia, | |
3407 | "mips_core_signal - internal error - bad switch"); | |
3408 | } | |
3409 | } | |
3410 | ||
3411 | ||
3412 | void | |
3413 | mips_cpu_exception_trigger(SIM_DESC sd, sim_cpu* cpu, address_word cia) | |
3414 | { | |
3415 | ASSERT(cpu != NULL); | |
3416 | ||
3417 | if(cpu->exc_suspended > 0) | |
3418 | sim_io_eprintf(sd, "Warning, nested exception triggered (%d)\n", cpu->exc_suspended); | |
3419 | ||
3420 | PC = cia; | |
3421 | memcpy(cpu->exc_trigger_registers, cpu->registers, sizeof(cpu->exc_trigger_registers)); | |
3422 | cpu->exc_suspended = 0; | |
3423 | } | |
3424 | ||
3425 | void | |
3426 | mips_cpu_exception_suspend(SIM_DESC sd, sim_cpu* cpu, int exception) | |
3427 | { | |
3428 | ASSERT(cpu != NULL); | |
3429 | ||
3430 | if(cpu->exc_suspended > 0) | |
3431 | sim_io_eprintf(sd, "Warning, nested exception signal (%d then %d)\n", | |
3432 | cpu->exc_suspended, exception); | |
3433 | ||
3434 | memcpy(cpu->exc_suspend_registers, cpu->registers, sizeof(cpu->exc_suspend_registers)); | |
3435 | memcpy(cpu->registers, cpu->exc_trigger_registers, sizeof(cpu->registers)); | |
3436 | cpu->exc_suspended = exception; | |
3437 | } | |
3438 | ||
3439 | void | |
3440 | mips_cpu_exception_resume(SIM_DESC sd, sim_cpu* cpu, int exception) | |
3441 | { | |
3442 | ASSERT(cpu != NULL); | |
3443 | ||
3444 | if(exception == 0 && cpu->exc_suspended > 0) | |
3445 | { | |
3446 | /* warn not for breakpoints */ | |
3447 | if(cpu->exc_suspended != sim_signal_to_host(sd, SIM_SIGTRAP)) | |
3448 | sim_io_eprintf(sd, "Warning, resuming but ignoring pending exception signal (%d)\n", | |
3449 | cpu->exc_suspended); | |
3450 | } | |
3451 | else if(exception != 0 && cpu->exc_suspended > 0) | |
3452 | { | |
3453 | if(exception != cpu->exc_suspended) | |
3454 | sim_io_eprintf(sd, "Warning, resuming with mismatched exception signal (%d vs %d)\n", | |
3455 | cpu->exc_suspended, exception); | |
3456 | ||
3457 | memcpy(cpu->registers, cpu->exc_suspend_registers, sizeof(cpu->registers)); | |
3458 | } | |
3459 | else if(exception != 0 && cpu->exc_suspended == 0) | |
3460 | { | |
3461 | sim_io_eprintf(sd, "Warning, ignoring spontanous exception signal (%d)\n", exception); | |
3462 | } | |
3463 | cpu->exc_suspended = 0; | |
3464 | } | |
3465 | ||
3466 | ||
3467 | /*---------------------------------------------------------------------------*/ | |
3468 | /*> EOF interp.c <*/ |