sim: convert to bfd_endian
[deliverable/binutils-gdb.git] / sim / mn10300 / ChangeLog
CommitLineData
1ac72f06
MF
12016-01-02 Mike Frysinger <vapier@gentoo.org>
2
3 * configure.ac (SIM_AC_OPTION_ENDIAN): Change LITTLE_ENDIAN to
4 LITTLE.
5 * configure: Regenerate.
6
e1211e55
MF
72015-12-30 Mike Frysinger <vapier@gentoo.org>
8
9 * wrapper.c (mn10300_reg_store, mn10300_reg_fetch): Define.
10 (sim_open): Call CPU_REG_FETCH/CPU_REG_STORE.
11 (sim_store_register): Rename to ...
12 (mn10300_reg_store): ... this.
13 (sim_fetch_register): Rename to ...
14 (mn10300_reg_fetch): ... this.
15
5e744ef8
MF
162015-12-27 Mike Frysinger <vapier@gentoo.org>
17
18 * Makefile.in (MN10300_OBJS): Delete sim-hload.o.
19
1b393626
MF
202015-12-26 Mike Frysinger <vapier@gentoo.org>
21
22 * config.in, configure: Regenerate.
23
26936211
MF
242015-12-24 Mike Frysinger <vapier@gentoo.org>
25
26 * sim-main.h (SIM_HANDLES_LMA): Delete.
27
84e8e361
MF
282015-12-24 Mike Frysinger <vapier@gentoo.org>
29
30 * sim-main.h (WITH_WATCHPOINTS): Delete.
31
d320201d
MF
322015-11-21 Mike Frysinger <vapier@gentoo.org>
33
34 * interp.c (mn10300_callback): Delete.
35 (sim_open): Delete mn10300_callback assignment.
36 (program_interrupt): Call sim_io_printf.
37 * mn10300_sim.h (mn10300_callback): Delete.
38
c389945b
MF
392015-11-17 Mike Frysinger <vapier@gentoo.org>
40
41 * sim-main.h (WITH_CORE): Delete.
42
797eee42
MF
432015-11-15 Mike Frysinger <vapier@gentoo.org>
44
45 * Makefile.in (SIM_OBJS): Delete sim-reason.o and sim-stop.o.
46
6e4f085c
MF
472015-11-14 Mike Frysinger <vapier@gentoo.org>
48
49 * interp.c (sim_close): Delete.
50
8d0978fb
MF
512015-06-23 Mike Frysinger <vapier@gentoo.org>
52
53 * configure: Regenerate.
54
7d5c6c43
MF
552015-06-17 Mike Frysinger <vapier@gentoo.org>
56
57 * op_utils.c (do_syscall): Replace call to cb_syscall with
58 sim_syscall_multi.
59
61a0c964
MF
602015-06-17 Mike Frysinger <vapier@gentoo.org>
61
62 * mn10300_sim.h (syscall_read_mem, syscall_write_mem): Delete.
63 * op_utils.c: Include sim-syscall.h.
64 (syscall_read_mem, syscall_write_mem): Delete.
65 (do_syscall): Change syscall_read_mem/syscall_write_mem
66 to sim_syscall_read_mem/sim_syscall_write_mem. Set syscall.p2.
67
a3487082
MF
682015-06-12 Mike Frysinger <vapier@gentoo.org>
69
70 * configure: Regenerate.
306f4178
MF
71
722015-06-12 Mike Frysinger <vapier@gentoo.org>
73
74 * configure: Regenerate.
a3487082 75
926b1cd8
MF
762015-06-11 Mike Frysinger <vapier@gentoo.org>
77
78 * interp.c (get_byte, get_half, get_word, put_byte, put_half,
79 put_word): Delete.
80 (sim_fetch_register): Inline put_word call.
81 (sim_store_register): Inline get_word call.
82 * mn10300_sim.h (struct _state): Delete mem member.
83 (OP, Simops, get_byte, get_half, get_word, put_byte, put_half,
84 put_word, map): Delete.
85 * op_utils.c (MEMPTR): Delete.
86
2cc78d4d
MF
872015-06-11 Mike Frysinger <vapier@gentoo.org>
88
89 * interp.c (round_64, fpu_status_ok): Add static.
90
96eaf29e
MF
912015-06-11 Mike Frysinger <vapier@gentoo.org>
92
93 * interp.c (mn10300_debug): Delete.
94 * mn10300_sim.h (DEBUG_TRACE, DEBUG_VALUES, mn10300_debug): Delete.
95 (struct _state): Delete exception and exited members.
96 [_WIN32] (SIGTRAP, SIGQUIT): Delete.
97 * op_utils.c (do_syscall): Call sim_engine_halt instead of setting
98 State.exception.
99
b0e4c8a5
MF
1002015-06-11 Mike Frysinger <vapier@gentoo.org>
101
102 * mn10300_sim.h (uint8, int8, uint16, int16, uint32, int32): Typedef
103 in terms of unsigned8, signed8, unsigned16, signed16, unsigned32,
104 and signed32 respectively.
105
5d19c366
MF
1062015-06-11 Mike Frysinger <vapier@gentoo.org>
107
108 * interp.c (INLINE): Delete define.
109 * mn10300_sim.h (INLINE): Likewise.
110
20bca71d
MF
1112015-04-18 Mike Frysinger <vapier@gentoo.org>
112
113 * sim-main.h (SIM_CPU): Delete.
114
7e83aa92
MF
1152015-04-18 Mike Frysinger <vapier@gentoo.org>
116
117 * sim-main.h (sim_cia): Delete.
118 (SIM_ADDR): Delete comment.
119
034685f9
MF
1202015-04-17 Mike Frysinger <vapier@gentoo.org>
121
122 * dv-mn103cpu.c (deliver_mn103cpu_interrupt): Change CIA_GET to
123 CPU_PC_GET and CIA_SET to CPU_PC_SET.
124 * interp.c (sim_create_inferior): Change CIA_SET to CPU_PC_SET.
125 (program_interrupt): Change CIA_GET to CPU_PC_GET and CIA_SET to
126 CPU_PC_SET.
127 (mn10300_cpu_exception_trigger): Change CIA_SET to CPU_PC_SET.
128 (mn10300_cpu_exception_suspend): Likewise.
129 (mn10300_cpu_exception_resume): Likewise.
130 * sim-main.h (CIA_GET, CIA_SET): Delete.
131
78e9aa70
MF
1322015-04-15 Mike Frysinger <vapier@gentoo.org>
133
134 * Makefile.in (MN10300_OBJS): Delete sim-cpu.o.
135 * sim-main.h (STATE_CPU): Delete.
136
bf12d44e
MF
1372015-04-13 Mike Frysinger <vapier@gentoo.org>
138
139 * configure: Regenerate.
140
64f14c97
MF
1412015-04-13 Mike Frysinger <vapier@gentoo.org>
142
143 * Makefile.in (MN10300_OBJS): Add sim-cpu.o.
144 * interp.c (mn10300_pc_get, mn10300_pc_set): New functions.
145 (sim_open): Declare new local var i. Call sim_cpu_alloc_all.
146 Call CPU_PC_FETCH & CPU_PC_STORE for all cpus.
147 (sim_pc_get): Delete.
148 * sim-main.h (null_cia, NULL_CIA): Delete.
149 (SIM_CPU): Define.
150 (struct sim_state): Change cpu to an array of pointers.
151 (STATE_CPU): Drop & and handle WITH_SMP.
152
122bbfb5
MF
1532015-04-06 Mike Frysinger <vapier@gentoo.org>
154
155 * Makefile.in (SIM_OBJS): Delete sim-engine.o and sim-hrw.o.
156
aadc9410
MF
1572015-03-31 Mike Frysinger <vapier@gentoo.org>
158
159 * config.in, configure: Regenerate.
160
05f53ed6
MF
1612015-03-24 Mike Frysinger <vapier@gentoo.org>
162
163 * interp.c (sim_pc_get): New function.
164
30452bbe
MF
1652015-03-24 Mike Frysinger <vapier@gentoo.org>
166
167 * configure: Regenerate.
168
66b0e85d
MF
1692015-03-23 Mike Frysinger <vapier@gentoo.org>
170
171 * Makefile.in (MN10300_OBJS): Delete dv-sockser.o.
172
64dd13df
MF
1732015-03-23 Mike Frysinger <vapier@gentoo.org>
174
175 * configure: Regenerate.
176
49cd1634
MF
1772015-03-23 Mike Frysinger <vapier@gentoo.org>
178
179 * configure: Regenerate.
180
4af3e7e0
MF
1812015-03-23 Mike Frysinger <vapier@gentoo.org>
182
183 * configure: Regenerate.
184
3649cb06
MF
1852015-03-23 Mike Frysinger <vapier@gentoo.org>
186
187 * configure: Regenerate.
188 * configure.ac: Delete SIM_DV_SOCKSER_O check.
189
ae7d0cac
MF
1902015-03-16 Mike Frysinger <vapier@gentoo.org>
191
192 * config.in, configure: Regenerate.
193
8406bb59
MF
1942015-03-15 Mike Frysinger <vapier@gentoo.org>
195
196 * tconfig.in: Delete file.
197
465fb143
MF
1982015-03-14 Mike Frysinger <vapier@gentoo.org>
199
200 * Makefile.in (SIM_RUN_OBJS): Delete.
201
5cddc23a
MF
2022015-03-14 Mike Frysinger <vapier@gentoo.org>
203
204 * configure.ac (AC_CHECK_HEADERS): Delete unistd.h & stdlib.h &
205 string.h & strings.h & time.h.
206 * aclocal.m4, configure: Regenerate.
207
2974be62
AM
2082014-08-19 Alan Modra <amodra@gmail.com>
209
210 * configure: Regenerate.
211
faa743bb
RM
2122014-08-15 Roland McGrath <mcgrathr@google.com>
213
214 * configure: Regenerate.
215 * config.in: Regenerate.
216
1a8a700e
MF
2172014-03-04 Mike Frysinger <vapier@gentoo.org>
218
219 * configure: Regenerate.
220
bf3d9781
AM
2212013-09-23 Alan Modra <amodra@gmail.com>
222
223 * configure: Regenerate.
224
31e6ad7d
MF
2252013-06-03 Mike Frysinger <vapier@gentoo.org>
226
227 * aclocal.m4, configure: Regenerate.
228
d3685d60
TT
2292013-05-10 Freddie Chopin <freddie_chopin@op.pl>
230
231 * configure: Rebuild.
232
1517bd27
MF
2332013-03-26 Mike Frysinger <vapier@gentoo.org>
234
235 * configure: Regenerate.
236
fb61c40a
JS
2372013-03-23 Joel Sherrill <joel.sherrill@oarcorp.com>
238
239 * configure.ac: Fail if dv-sockser.o not available.
240 Error when --disable-sim-hardware is specified.
241 * tconfig.in: Conditionalize use of dv_sockser_install.
242 * configure: Regenerated.
243 * config.in: Regenerated.
244
e8c21678
HPN
2452012-06-17 Hans-Peter Nilsson <hp@axis.com>
246
247 * interp.c: Include config.h first. Do not include sysdep.h.
248
5f3ef9d0
JB
2492012-06-15 Joel Brobecker <brobecker@adacore.com>
250
251 * config.in, configure: Regenerate.
252
2232061b
MF
2532012-03-24 Mike Frysinger <vapier@gentoo.org>
254
255 * aclocal.m4, config.in, configure: Regenerate.
256
f95586a4
KB
2572012-02-16 Kevin Buettner <kevinb@redhat.com>
258
259 * interp.c (sim_fetch_register): Return length, not -1.
260
12c3e59c
JB
2612012-01-02 Joel Brobecker <brobecker@adacore.com>
262
263 * sim-main.h: Reformat copyright header.
264
db2e4d67
MF
2652011-12-03 Mike Frysinger <vapier@gentoo.org>
266
267 * aclocal.m4: New file.
268 * configure: Regenerate.
269
481d7981
MF
2702011-11-07 Mike Frysinger <vapier@gentoo.org>
271
272 PR sim/9302
273 * dv-mn103iop.c (write_dedicated_control_reg): Convert && to &.
274
4399a56b
MF
2752011-10-19 Mike Frysinger <vapier@gentoo.org>
276
277 * configure: Regenerate after common/acinclude.m4 update.
278
9c082ca8
MF
2792011-10-17 Mike Frysinger <vapier@gentoo.org>
280
281 * configure.ac: Change include to common/acinclude.m4.
282
6ffe910a
MF
2832011-10-17 Mike Frysinger <vapier@gentoo.org>
284
285 * configure.ac: Change AC_PREREQ to 2.64. Delete AC_CONFIG_HEADER
286 call. Replace common.m4 include with SIM_AC_COMMON.
287 * configure: Regenerate.
288
2419798b
MF
2892011-07-05 Mike Frysinger <vapier@gentoo.org>
290
291 * interp.c (sim_do_command): Delete.
292
be07a3d3
NC
2932011-06-20 Nick Clifton <nickc@redhat.com>
294
295 * am33.igen (sub Rm,Rn,Rd): Fix computation of carry flag.
296
dae477fe
AB
2972011-01-11 Andrew Burgess <aburgess@broadcom.com>
298
299 * interp.c (sim_store_register): Update return value to
300 match new API.
301
952ad68f
MF
3022010-04-19 Mike Frysinger <vapier@gentoo.org>
303
304 * dv-mn103ser.c (sockser_addr, USE_SOCKSER_P): Delete
305 (do_polling_event): Change USE_SOCKSER_P to dv_sockser_status.
306 (read_status_reg): Likewise.
307 (write_txb): Likewise.
308
3725885a
RW
3092010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
310
311 * configure: Regenerate.
312
d6416cdc
RW
3132009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
314
81ecdfbb
RW
315 * config.in: Regenerate.
316 * configure: Likewise.
317
d6416cdc
RW
318 * configure: Regenerate.
319
b5bd9624
HPN
3202008-07-11 Hans-Peter Nilsson <hp@axis.com>
321
322 * configure: Regenerate to track ../common/common.m4 changes.
323 * config.in: Ditto.
324
6efef468 3252008-06-06 Vladimir Prus <vladimir@codesourcery.com>
72f4393d
L
326 Daniel Jacobowitz <dan@codesourcery.com>
327 Joseph Myers <joseph@codesourcery.com>
6efef468
JM
328
329 * configure: Regenerate.
330
edc5d9ec
HPN
3312006-12-21 Hans-Peter Nilsson <hp@axis.com>
332
333 * acconfig.h: Remove.
334 * config.in: Regenerate.
335
e85e3205
RE
3362006-06-13 Richard Earnshaw <rearnsha@arm.com>
337
338 * configure: Regenerated.
339
2f0122dc
DJ
3402006-06-05 Daniel Jacobowitz <dan@codesourcery.com>
341
342 * configure: Regenerated.
343
20e95c23
DJ
3442006-05-31 Daniel Jacobowitz <dan@codesourcery.com>
345
346 * configure: Regenerated.
347
b3a3ffef
HPN
3482006-03-29 Hans-Peter Nilsson <hp@axis.com>
349
350 * configure: Regenerate.
351
2b193c4a
MK
3522005-03-23 Mark Kettenis <kettenis@gnu.org>
353
354 * configure: Regenerate.
355
35695fd6
AC
3562005-01-14 Andrew Cagney <cagney@gnu.org>
357
358 * configure.ac: Sinclude aclocal.m4 before common.m4. Add
359 explicit call to AC_CONFIG_HEADER.
360 * configure: Regenerate.
361
f0569246
AC
3622005-01-12 Andrew Cagney <cagney@gnu.org>
363
364 * configure.ac: Update to use ../common/common.m4.
365 * configure: Re-generate.
366
38f48d72
AC
3672005-01-11 Andrew Cagney <cagney@localhost.localdomain>
368
369 * configure: Regenerated to track ../common/aclocal.m4 changes.
370
b7026657
AC
3712005-01-07 Andrew Cagney <cagney@gnu.org>
372
373 * configure.ac: Rename configure.in, require autoconf 2.59.
374 * configure: Re-generate.
375
379832de
HPN
3762004-12-08 Hans-Peter Nilsson <hp@axis.com>
377
378 * configure: Regenerate for ../common/aclocal.m4 update.
379
599e0b9e
AO
3802004-06-26 Alexandre Oliva <aoliva@redhat.com>
381
c76b4bab
AO
382 2000-08-07 Graham Stott <grahams@cygnus.co.uk>
383 * am33-2.igen (fmadd, fmsub, fmnadd, fmnsub): Correct typo.
384 2000-05-29 Alexandre Oliva <aoliva@cygnus.com>
385 * interp.c (fpu_disabled_exception, fpu_unimp_exception,
386 fpu_check_signal_exception): Take additional state arguments.
387 Print exception type and call program_interrupt. Adjust callers.
388 (fpu_rsqrt, fpu_cmp, fpu_add, fpu_sub, fpu_mul, fpu_div,
389 fpu_fmadd, fpu_fmsub, fpu_fnmadd, fpu_fnmsub): Take additional
390 arguments.
391 * mn10300_sim.h (fpu_disabled_exception, fpu_unimp_exception,
392 fpu_check_signal_exception): Adjust prototypes.
393 (fpu_rsqrt, fpu_cmp, fpu_add, fpu_sub, fpu_mul, fpu_div,
394 fpu_fmadd, fpu_fmsub, fpu_fnmadd, fpu_fnmsub): Likewise.
395 * am33-2.igen: Adjust calls.
396 2000-05-19 Alexandre Oliva <aoliva@cygnus.com>
397 * op_utils.c (cmp2fcc): Moved...
398 * interp.c: ... here.
399 2000-05-18 Alexandre Oliva <aoliva@cygnus.com>
400 * am33-2.igen: Use `unsigned32', `signed32', `unsigned64' or
401 `signed64' where type width is relevant.
402 2000-05-15 Alexandre Oliva <aoliva@cygnus.com>
403 * mn10300_sim.h: Include sim-fpu.h.
404 (FD2FPU, FPU2FD): Enclose the FD argument in parentheses.
405 (fpu_check_signal_exception): Declare.
406 (struct fp_prec_t, fp_single_prec, fp_double_prec): Likewise.
407 (FP_SINGLE, FP_DOUBLE): Shorthands for fp_*_prec.
408 (fpu_rsqrt, fpu_cmp, fpu_add, fpu_sub, fpu_mul, fpu_div,
409 fpu_fmadd, fpu_fmsub, fpu_fnmadd, fpu_fnmsub): Declare.
410 * interp.c (fpu_disabled_exception): Document.
411 (fpu_unimp_exception): Likewise.
412 (fpu_check_signal_exception): Define.
413 (reg2val_32, round_32, val2reg_32, fp_single_prec): Likewise.
414 (reg2val_64, round_64, val2reg_64, fp_double_prec): Likewise.
415 (REG2VAL, ROUND, VAL2REG): Define shorthands.
416 (fpu_status_ok): Define.
417 (fpu_rsqrt, fpu_cmp, fpu_add, fpu_sub, fpu_mul, fpu_div,
418 fpu_fmadd, fpu_fmsub, fpu_fnmadd, fpu_fnmsub): Define.
419 * am33-2.igen (frsqrt, fcmp, fadd, fsub, fmul, fdiv,
420 fmadd, fmsub, fnmadd, fnmsub): Use new functions.
421 2000-04-27 Alexandre Oliva <aoliva@cygnus.com>
422 * interp.c (sim_create_inferior): Set PSW bit to enable FP insns
423 if architecture is AM33/2.0.
424 * am33.igen: Include am33-2.igen.
425 2000-04-23 Alexandre Oliva <aoliva@cygnus.com>
426 * mn10300.igen (movm, call, ret, retf): Check for am33_2 too.
427 * am33.igen (movm): Likewise.
428 2000-04-19 Alexandre Oliva <aoliva@cygnus.com>
429 * am33.igen: Added `*am33_2' to some instructions that were
430 missing it.
431 2000-04-07 Alexandre Oliva <aoliva@cygnus.com>
432 * am33-2.igen: New file. All insns implemented, but FP flags are
433 only set for fcmp, exceptional conditions are not handled yet.
434 * Makefile.in (IGEN_INSN): Added am33-2.igen.
435 (tmp-igen): Added -M am33_2.
436 * mn10300.igen, am33.igen: Added `*am33_2' to all insns.
437 * gencode.c: Support FMT_D3.
438 * mn10300_sim.h (dword): New type.
439 (struct _state): Added fpregs.
440 (REG_FPCR, FPCR): New define. All assorted bitmaps.
441 (XS2FS, AS2FS, Xf2FD): New macros.
442 (FS2FPU, FD2FPU, FPU2FS, FPU2FD): Likewise.
443 (load_dword, store_dword): New functions or macros.
444 (u642dw, dw2u64): New functions.
445 (fpu_disabled_exception, fpu_unimp_exception): Declared.
446 * interp.c (fpu_disabled_exception): Defined; no actual
447 implementation.
448 (fpu_unimp_exception): Likewise.
449 * op_utils.c (cmp2fcc): New function.
450
489503ee
AO
451 * interp.c, mn10300_sim.h, op_utils.c: Convert function prototypes
452 and definitions to ISO C.
453
622c89b6
AO
454 * gencode.c, simops.c: Delete.
455 * Makefile.in: Remove non-COMMON dependencies and commands.
456
599e0b9e
AO
457 * configure.in: Use common simulator always. Don't subst sim_gen
458 nor mn10300_common.
459 * configure: Rebuilt.
460 * Makefile.in (WITHOUT_COMMON_OBJS, WITHOUT_COMMON_INTERP_DEP,
461 WITHOUT_COMMON_RUN_OBJS): Remove.
462 (WITH_COMMON_OBJS): Rename to MN10300_OBJS.
463 (WITH_COMMON_INTERP_DEP): Rename to MN10300_INTERP_DEP.
464 (WITH_COMMON_RUN_OBJS): Rename to SIM_RUN_OBJS.
465 (SIM_EXTRA_CFLAGS): Don't use @sim_gen@.
466 * interp.c: Remove non-common bits.
467 * mn10300_sim.h: Likewise.
468
e158f0a0
AC
4692003-08-28 Andrew Cagney <cagney@redhat.com>
470
471 * dv-mn103ser.c (do_polling_event): Change type of "serial_reg" to
472 "long".
473 (read_status_reg): Cast "serial_reg" to "long".
474 * dv-mn103tim.c (do_counter_event): Change type of "timer_nr" to
475 "long".
476 (do_counter6_event, write_mode_reg, write_tm6md): Ditto.
477
6b4a8935
AC
4782003-02-27 Andrew Cagney <cagney@redhat.com>
479
480 * interp.c (sim_open, sim_create_inferior, sim_open)
481 (sim_create_inferior): Rename _bfd to bfd.
482
dbd7cd63
AC
4832003-02-26 Andrew Cagney <cagney@redhat.com>
484
485 * am33.igen: Call sim_engine_abort instead of abort.
486
bb6317d3
DC
4872003-02-26 David Carlton <carlton@math.stanford.edu>
488
489 * dv-mn103tim.c (read_special_timer6_reg): Add break after
490 empty default: label.
491 (write_special_timer6_reg): Ditto.
492 Update copyright.
493
6c0a25e9
AC
4942002-11-28 Andrew Cagney <cagney@redhat.com>
495
496 * sim-main.h: Only include "idecode.h" once.
497 * Makefile.in (SIM_EXTRA_DEPS): Define.
498
c8cca39f
AC
4992002-06-16 Andrew Cagney <ac131313@redhat.com>
500
501 * configure: Regenerated to track ../common/aclocal.m4 changes.
502
3c25f8c7
AC
5032002-06-09 Andrew Cagney <cagney@redhat.com>
504
505 * Makefile.in (INCLUDE): Update path to callback.h.
506 * mn10300_sim.h: Include "gdb/callback.h" and "gdb/remote-sim.h".
507 * tconfig.in: Ditto.
508
ff88f59d
JB
5092001-05-06 Jim Blandy <jimb@redhat.com>
510
511 * mn10300.igen: Doc fixes.
72f4393d 512
cc274e7c
AO
5132001-04-26 Alexandre Oliva <aoliva@redhat.com>
514
515 * Makefile.in (idecode.o, op_utils.o, semantics.o, simops.o):
516 Depend on targ-vals.h.
517
d4424ada
C
5182001-04-15 J.T. Conklin <jtc@redback.com>
519
520 * Makefile.in (simops.o): Add simops.h to dependency list.
521
5425ca99
AO
522Wed Aug 9 02:24:53 2000 Graham Stott <grahams@cygnus.co.uk>
523
524 * am33.igen: Warning clean-up.
525 (movm): Initialize PC and mask.
526 (mov, movbu, movhu): Set srcreg2 from RI0.
527 (bsch): Initialize c.
528 (sat16_cmp): Actually do the comparison.
529 (mov_llt): Do not overwrite dstreg with uninitialized variable.
530
eb2d80b4
AC
531Tue May 23 21:39:23 2000 Andrew Cagney <cagney@b1.cygnus.com>
532
533 * configure: Regenerated to track ../common/aclocal.m4 changes.
534
e33c0364
AO
5352000-05-22 Alexandre Oliva <aoliva@cygnus.com>
536
537 * am33.igen: Fix leading comments of SP-relative offset insns that
538 referred to other registers. Make their offsets unsigned.
539
24a39d88
AO
5402000-05-18 Alexandre Oliva <aoliva@cygnus.com>
541
542 * mn10300_sim.h (genericAdd, genericSub, genericCmp, genericOr,
543 genericXor, genericBtst): Use `unsigned32'.
544 * op_utils.c: Likewise.
545 * mn10300.igen, am33.igen: Use `unsigned32', `signed32',
546 `unsigned64' or `signed64' where type width is relevant.
547
bfa8561f
AO
5482000-04-25 Alexandre Oliva <aoliva@cygnus.com>
549
550 * am33.igen (inc4 Rn): Use genericAdd so as to modify flags.
551
d8e7020f
AO
5522000-04-09 Alexandre Oliva <aoliva@cygnus.com>
553
554 * am33.igen: Make SP-relative offsets unsigned. Add `*am33' for
555 some instructions that were missing it.
556
a9e3a739
FCE
5572000-03-03 Alexandre Oliva <oliva@lsd.ic.unicamp.br>
558
559 * Makefile.in (IGEN_INSN): Added am33.igen.
560
d4f3574e
SS
561Thu Sep 2 18:15:53 1999 Andrew Cagney <cagney@b1.cygnus.com>
562
563 * configure: Regenerated to track ../common/aclocal.m4 changes.
564
adf40b2e
JM
565Tue Jul 13 13:26:20 1999 Andrew Cagney <cagney@b1.cygnus.com>
566
567 * interp.c: Clarify error message reporting an unknown board.
568
cd0fc7c3
SS
5691999-05-08 Felix Lee <flee@cygnus.com>
570
571 * configure: Regenerated to track ../common/aclocal.m4 changes.
72f4393d 572
7a292a7a
SS
5731999-04-16 Frank Ch. Eigler <fche@cygnus.com>
574
575 * interp.c (program_interrupt): Detect undesired recursion using
576 static flag. Set NMIRC register's SYSEF flag during
577 --board=stdeval1 mode.
578 * dv-mn103-int.c (write_icr): Add backdoor address to allow CPU to
579 set SYSEF flag.
580
5811999-04-02 Keith Seitz <keiths@cygnus.com>
582
583 * Makefile.in (SIM_EXTRA_CFLAGS): Define a POLL_QUIT_INTERVAL
584 for use in the simulator so that the poll_quit callback is
585 not called too often.
586
587Tue Mar 9 21:26:41 1999 Andrew Cagney <cagney@b1.cygnus.com>
588
589 * dv-mn103int.c (mn103int_ioctl): Return something.
590 * dv-mn103tim.c (write_tm6md): GCC suggested parentheses around &&
591 within ||.
592
593Tue Feb 16 23:57:17 1999 Jeffrey A Law (law@cygnus.com)
594
595 * mn10300.igen (retf): Fix return address computation and store
596 the new pc value into nia.
597
c906108c
SS
5981998-12-29 Frank Ch. Eigler <fche@cygnus.com>
599
600 * Makefile.in (WITH_COMMON_OBJS): Build also dv-sockser.o.
601 * interp.c (sim_open): Add stub mn103002 cache control memory regions.
602 Set OPERATING_ENVIRONMENT on "stdeval1" board.
603 (mn10300_core_signal): New function to intercept memory errors.
604 (program_interrupt): New function to dispatch to exception vector
605 (mn10300_exception_*): New functions to snapshot pre/post exception
606 state.
607 * sim-main.h (SIM_CORE_SIGNAL): Define hook - call mn10300_core_signal.
72f4393d 608 (SIM_ENGINE_HALT_HOOK): Do nothing.
c906108c 609 (SIM_CPU_EXCEPTION*): Define hooks to call mn10300_cpu_exception*().
72f4393d 610 (_sim_cpu): Add exc_* fields to store register value snapshots.
c906108c
SS
611 * dv-mn103ser.c (*): Support dv-sockser backend for UART I/O.
612 Various endianness and warning fixes.
613 * mn10300.igen (illegal): Call program_interrupt on error.
614 (break): Call program_interrupt on breakpoint
72f4393d 615
c906108c
SS
616 Several changes from <janczyn@cygnus.com> and <cagney@cygnus.com>
617 merged in:
618 * dv-mn103int.c (mn103int_ioctl): New function for NMI
619 generation. (mn103int_finish): Install it as ioctl handler.
620 * dv-mn103tim.c: Support timer 6 specially. Endianness fixes.
72f4393d 621
c2d11a7d
JM
622Wed Oct 14 12:11:05 1998 Jeffrey A Law (law@cygnus.com)
623
624 * am33.igen: Allow autoincrement stores using the same register
625 for source and destination operands.
626
627Mon Aug 31 10:19:55 1998 Jeffrey A Law (law@cygnus.com)
628
72f4393d 629 * am33.igen: Reverse HI/LO outputs of 4 operand "mul" and "mulu".
c2d11a7d 630
c906108c
SS
631Fri Aug 28 14:40:49 1998 Joyce Janczyn <janczyn@cygnus.com>
632
633 * interp.c (sim_open): Check for invalid --board option, fix
634 indentation, allocate memory for mem control and DMA regs.
635
636Wed Aug 26 09:29:38 1998 Joyce Janczyn <janczyn@cygnus.com>
637
638 * mn10300.igen (div,divu): Fix divide instructions so divide by 0
639 behaves like the hardware.
640
641Mon Aug 24 11:50:09 1998 Joyce Janczyn <janczyn@cygnus.com>
642
643 * sim-main.h (SIM_HANDLES_LMA): Define SIM_HANDLES_LMA.
644
c2d11a7d
JM
645Wed Aug 12 12:36:07 1998 Jeffrey A Law (law@cygnus.com)
646
72f4393d 647 * am33.igen: Handle case where first DSP operation modifies a
c2d11a7d
JM
648 register used in the second DSP operation correctly.
649
650Tue Jul 28 10:10:25 1998 Jeffrey A Law (law@cygnus.com)
651
652 * am33.igen: Detect cases where two operands must not match for
653 DSP instructions too.
654
655Mon Jul 27 12:04:17 1998 Jeffrey A Law (law@cygnus.com)
656
657 * am33.igen: Detect cases where two operands must not match in
658 non-DSP instructions.
659
c906108c
SS
660Fri Jul 24 18:15:21 1998 Joyce Janczyn <janczyn@cygnus.com>
661
662 * op_utils.c (do_syscall): Rewrite to use common/syscall.c.
663 (syscall_read_mem, syscall_write_mem): New functions for syscall
664 callbacks.
665 * mn10300_sim.h: Add prototypes for syscall_read_mem and
72f4393d 666 syscall_write_mem.
c906108c
SS
667 * mn10300.igen: Change C++ style comments to C style comments.
668 Check for divide by zero in div and divu ops.
669
c2d11a7d
JM
670Fri Jul 24 12:49:28 1998 Jeffrey A Law (law@cygnus.com)
671
672 * am33.igen (translate_xreg): New function. Use it as needed.
673
674Thu Jul 23 10:05:28 1998 Jeffrey A Law (law@cygnus.com)
675
676 * am33.igen: Add some missing instructions.
677
678 * am33.igen: Autoincrement loads/store fixes.
679
680Tue Jul 21 09:48:14 1998 Jeffrey A Law (law@cygnus.com)
681
682 * am33.igen: Add mov_lCC DSP instructions.
683
684 * am33.igen: Add most am33 DSP instructions.
685
c906108c
SS
686Thu Jul 9 10:06:55 1998 Jeffrey A Law (law@cygnus.com)
687
688 * mn10300.igen: Fix Z bit for addc and subc instructions.
689 Minor fixes in multiply/divide patterns.
690
c2d11a7d
JM
691 * am33.igen: Add missing mul[u] imm32,Rn. Fix condition code
692 handling for many instructions. Fix sign extension for some
693 24bit immediates.
694
695 * am33.igen: Fix Z bit for remaining addc/subc instructions.
696 Do not sign extend immediate for mov imm,XRn.
697 More random mul, mac & div fixes.
698 Remove some unused variables.
699 Sign extend 24bit displacement in memory addresses.
700
701 * am33.igen: Fix Z bit for addc Rm,Rn and subc Rm,Rn. Various
702 fixes to 2 register multiply, divide and mac instructions. Set
703 Z,N correctly for sat16. Sign extend 24 bit immediate for add,
704 and sub instructions.
705
706 * am33.igen: Add remaining non-DSP instructions.
707
708Wed Jul 8 16:29:12 1998 Jeffrey A Law (law@cygnus.com)
709
710 * am33.igen (translate_rreg): New function. Use it as appropriate.
711
712 * am33.igen: More am33 instructions. Fix "div".
713
714Mon Jul 6 15:39:22 1998 Jeffrey A Law (law@cygnus.com)
715
716 * mn10300.igen: Add am33 support.
717
718 * Makefile.in: Use multi-sim to support both a mn10300 and am33
719 simulator.
720
721 * am33.igen: Add many more am33 instructions.
c906108c
SS
722
723Wed Jul 1 17:07:09 1998 Jeffrey A Law (law@cygnus.com)
724
725 * mn10300_sim.h (FETCH24): Define.
726
c2d11a7d
JM
727 * mn10300_sim.h: Add defines for some registers found on the AM33.
728 * am33.igen: New file with some am33 support.
c906108c
SS
729
730Tue Jun 30 11:23:20 1998 Jeffrey A Law (law@cygnus.com)
731
732 * mn10300_sim.h: Include bfd.h
733 (struct state): Add more room for processor specific registers.
c2d11a7d 734 (REG_E0): Define.
c906108c
SS
735
736Thu Jun 25 10:12:03 1998 Joyce Janczyn <janczyn@cygnus.com>
737
738 * dv-mn103tim.c: Include sim-assert.h
739 * dv-mn103ser.c (do_polling_event): Check for incoming data on
740 serial line and schedule next polling event.
741 (read_status_reg): schedule events to check for incoming data on
742 serial line and issue interrupt if necessary.
72f4393d 743
c906108c
SS
744Fri Jun 19 16:47:27 1998 Joyce Janczyn <janczyn@cygnus.com>
745
746 * interp.c (sim_open): hook up serial 1 and 2 ports properly (typo).
747
748Fri Jun 19 11:59:26 1998 Joyce Janczyn <janczyn@cygnus.com>
749
750 * interp.c (board): Rename am32 to stdeval1 as this is the name
751 consistently used to refer to the mn1030002 board.
752
753Thu June 18 14:37:14 1998 Joyce Janczyn <janczyn@cygnus.com>
754 * interp.c (sim_open): Fix typo in address of EXTMD register
755 (0x34000280, not 0x3400280).
756
757Wed Jun 17 18:00:18 1998 Jeffrey A Law (law@cygnus.com)
758
759 * simops.c (syscall): Handle change in opcode # for syscall.
760 * mn10300.igen (syscall): Likewise.
761
762Tue June 16 09:36:21 1998 Joyce Janczyn <janczyn@cygnus.com>
763 * dv-mn103int.c (mn103int_finish): Regular interrupts (not NMI or
764 reset) are not enabled on reset.
72f4393d 765
c906108c
SS
766Sun June 14 17:04:00 1998 Joyce Janczyn <janczyn@cygnus.com>
767 * dv-mn103iop.c (write_*_reg): Check for attempt to write r/o
768 register bits.
769 * dv-mn103ser.c: Fill in methods for reading and writing to serial
770 device registers.
771 * interp.c (sim_open): Make the serial device a polling device.
72f4393d 772
c906108c
SS
773Fri June 12 16:24:00 1998 Joyce Janczyn <janczyn@cygnus.com>
774 * dv-mn103iop.c: New file for handling am32 io ports.
775 * configure.in: Add mn103iop to hw_device list.
776 * configure: Re-generate.
777 * interp.c (sim_open): Create io port device.
778
779Wed June 10 14:34:00 1998 Joyce Janczyn <janczyn@cygnus.com>
780 * dv-mn103int.c (external_group): Use enumerated types to access
781 correct group addresses.
782 * dv-mn103tim.c (do_counter_event): Underflow of cascaded timer
783 triggers an interrupt on the higher-numbered timer's port.
784
785Mon June 8 13:30:00 1998 Joyce Janczyn <janczyn@cygnus.com>
786 * interp.c: (mn10300_option_handler): New function parses arguments
787 using sim-options.
788 * (board): Add --board option for specifying am32.
789 * (sim_open): Create new timer and serial devices and control
790 configuration of other am32 devices via board option.
791 * dv-mn103tim.c, dv-mn103ser.c: New files for timers and serial devices.
792 * dv-mn103cpu.c: Fix typos in opening comments.
793 * dv-mn103int.c: Adjust interrupt controller settings for am32 instead of am30.
794 * configure.in: Add mn103tim and mn103ser to hw_device list.
795 * configure: Re-generate.
796
797Mon May 25 20:50:35 1998 Andrew Cagney <cagney@b1.cygnus.com>
798
799 * dv-mn103int.c, dv-mn103cpu.c: Rename *_callback to *_method.
800
801 * dv-mn103cpu.c, dv-mn103int.c: Include hw-main.h and
802 sim-main.h. Declare a struct hw_descriptor instead of struct
803 hw_device_descriptor.
804
805Mon May 25 17:33:33 1998 Andrew Cagney <cagney@b1.cygnus.com>
806
807 * dv-mn103cpu.c (struct mn103cpu): Change type of pending_handler
808 to struct hw_event.
809
810Fri May 22 12:17:41 1998 Andrew Cagney <cagney@b1.cygnus.com>
811
812 * configure.in (SIM_AC_OPTION_HARDWARE): Add argument "yes".
813
814Wed May 6 13:29:06 1998 Andrew Cagney <cagney@b1.cygnus.com>
815
816 * interp.c (sim_open): Create a polling PAL device.
817
818Fri May 1 16:39:15 1998 Andrew Cagney <cagney@b1.cygnus.com>
819
72f4393d
L
820 * dv-mn103int.c (mn103int_port_event):
821 (mn103int_port_event):
822 (mn103int_io_read_buffer):
823 (mn103int_io_write_buffer):
c906108c
SS
824
825 * dv-mn103cpu.c (deliver_mn103cpu_interrupt): Drop CPU/CIA args.
826 (mn103cpu_port_event): Ditto.
827 (mn103cpu_io_read_buffer): Ditto.
828 (mn103cpu_io_write_buffer): Ditto.
829
830Tue Apr 28 18:33:31 1998 Geoffrey Noer <noer@cygnus.com>
831
72f4393d 832 * configure: Regenerated to track ../common/aclocal.m4 changes.
c906108c
SS
833
834Sun Apr 26 15:31:55 1998 Tom Tromey <tromey@creche>
835
836 * configure: Regenerated to track ../common/aclocal.m4 changes.
837 * config.in: Ditto.
838
839Sun Apr 26 15:19:55 1998 Tom Tromey <tromey@cygnus.com>
840
841 * acconfig.h: New file.
842 * configure.in: Reverted change of Apr 24; use sinclude again.
843
844Fri Apr 24 14:16:40 1998 Tom Tromey <tromey@creche>
845
846 * configure: Regenerated to track ../common/aclocal.m4 changes.
847 * config.in: Ditto.
848
849Fri Apr 24 11:19:07 1998 Tom Tromey <tromey@cygnus.com>
850
851 * configure.in: Don't call sinclude.
852
853Tue Apr 14 10:03:02 1998 Andrew Cagney <cagney@b1.cygnus.com>
854
855 * mn10300_sim.h: Declare all functions in op_utils.c using
856 INLINE_SIM_MAIN.
857 * op_utils.c: Ditto.
858 * sim-main.c: New file. Include op_utils.c.
72f4393d 859
c906108c
SS
860 * mn10300.igen (mov, cmp): Use new igen operators `!' and `=' to
861 differentiate between MOV/CMP immediate/register instructions.
862
863 * configure.in (SIM_AC_OPTION_INLINE): Add and enable.
864 * configure: Regenerate.
865
866Sat Apr 4 20:36:25 1998 Andrew Cagney <cagney@b1.cygnus.com>
867
868 * configure: Regenerated to track ../common/aclocal.m4 changes.
869
870Fri Mar 27 16:15:52 1998 Andrew Cagney <cagney@b1.cygnus.com>
871
872 * interp.c (hw): Delete variable, moved to SIM_DESC.
873 (sim_open): Delete calls to hw_tree_create, hw_tree_finish.
874 Handled by sim-module.
875 (sim_open): Do not anotate tree with trace properties, handled by
876 sim-hw.c
877 (sim_open): Call sim_hw_parse instead of hw_tree_parse.
878
879 * configure: Regenerated to track ../common/aclocal.m4 changes.
880
881Thu Mar 26 20:46:18 1998 Stu Grossman <grossman@bhuna.cygnus.co.uk>
882
883 * dv-mn103cpu.c (deliver_mn103cpu_interrupt): Save the entire PC
884 on the stack when delivering interrupts (not just the lower
885 half)...
886 * mn10300.igen (mov (Di,Am),Dn): Fix decode. Registers were
887 specified in the wrong order.
888
889Fri Mar 27 00:56:40 1998 Andrew Cagney <cagney@b1.cygnus.com>
890
891 * dv-mn103cpu.c (deliver_mn103cpu_interrupt): Stop loss of
892 succeeding interrupts, clear pending_handler when the handler
893 isn't re-scheduled.
894
895Thu Mar 26 10:11:01 1998 Stu Grossman <grossman@bhuna.cygnus.co.uk>
896
897 * Makefile.in (tmp-igen): Prefix all usage of move-if-change
898 script with $(SHELL) to make NT native builds happy.
899 * configure: Regenerate because of change to ../common/aclocal.m4.
72f4393d 900
c906108c
SS
901Thu Mar 26 11:22:31 1998 Andrew Cagney <cagney@b1.cygnus.com>
902
903 * configure.in: Make --enable-sim-common the default.
904 * configure: Re-generate.
72f4393d 905
c906108c
SS
906 * sim-main.h (CIA_GET, CIA_SET): Save/restore current instruction
907 address into Sate.regs[REG_PC] instead of common struct.
908
909Wed Mar 25 17:42:00 1998 Joyce Janczyn <janczyn@cygnus.com>
910
911 * mn10300.igen (cmp imm8,An): Do not sign extend imm8 value.
912
913Wed Mar 25 12:08:00 1998 Joyce Janczyn <janczyn@cygnus.com>
914
915 * simops.c (OP_F0FD): Initialise variable 'sp'.
916
917Thu Mar 26 00:21:32 1998 Andrew Cagney <cagney@b1.cygnus.com>
918
919 * dv-mn103int.c (decode_group): A group register every 4 bytes not
920 8.
921 (write_icr): Rewrite equation updating request field.
922 (read_iagr): Fix check that interrupt is still pending.
923
924Wed Mar 25 16:14:50 1998 Andrew Cagney <cagney@b1.cygnus.com>
925
926 * interp.c (sim_open): Tidy up device creation.
927
928 * dv-mn103int.c (mn103int_port_event): Drive NMI with non-zero
929 value.
930 (mn103int_io_read_buffer): Convert absolute address to register
931 block offsets.
932 (read_icr, write_icr): Convert block offset into group offset.
72f4393d 933
c906108c
SS
934Wed Mar 25 15:08:49 1998 Andrew Cagney <cagney@b1.cygnus.com>
935
936 * interp.c (sim_open): Create second 1mb memory region at
937 0x40000000.
938 (sim_open): Create a device tree.
939 (sim-hw.h): Include.
940 (do_interrupt): Delete, needs to use dv-mn103cpu.c
941
942 * dv-mn103int.c, dv-mn103cpu.c: New files.
943
944Wed Mar 25 08:47:38 1998 Andrew Cagney <cagney@b1.cygnus.com>
945
946 * mn10300_sim.h (EXTRACT_PSW_LM, INSERT_PSW_LM, PSW_IE, PSW_LM):
947 Define.
948 (SP): Define.
72f4393d 949
c906108c
SS
950Wed Mar 25 12:35:29 1998 Andrew Cagney <cagney@b1.cygnus.com>
951
952 * configure: Regenerated to track ../common/aclocal.m4 changes.
953
954Wed Mar 25 10:24:48 1998 Andrew Cagney <cagney@b1.cygnus.com>
955
956 * interp.c (sim-options.h): Include.
957 (sim_kind, myname): Declare when not using common framework.
958
959 * mn10300_sim.h (do_syscall, generic*): Provide prototypes for
960 functions found in op_utils.c
961
962 * mn10300.igen (add): Discard unused variables.
963
964 * configure, config.in: Re-generate with autoconf 2.12.1.
72f4393d 965
c906108c
SS
966Tue Mar 24 15:27:00 1998 Joyce Janczyn <janczyn@cygnus.com>
967
968 Add support for --enable-sim-common option.
969 * Makefile.in (WITHOUT_COMMON_OBJS): Files included if
970 ! --enable-sim-common
971 (WITH_COMMON_OBJS): Files included if --enable-sim-common.
972 (MN10300_OBJS,MN10300_INTERP_DEP): New variables.
973 (SIM_OBJS): Rewrite.
974 ({WITHOUT,WITH}_COMMON_RUN_OBJS,SIM_RUN_OBJS): New variables.
975 (SIM_EXTRA_CFLAGS): New variable.
976 (clean-extra): Clean up igen files.
977 (../igen/igen,clean-igen,tmp-igen): New rules.
72f4393d 978 * configure.in: Add support for common framework via
c906108c
SS
979 --enable-sim-common.
980 * configure: Regenerate.
981 * interp.c: #include sim-main if WITH_COMMON, not mn10300_sim.h.
982 (hash,dispatch,sim_size): Don't compile if ! WITH_COMMON.
983 (init_system,sim_write,compare_simops): Likewise.
984 (sim_set_profile,sim_set_profile_size): Likewise.
985 (sim_stop,sim_resume,sim_trace,sim_info): Likewise.
986 (sim_set_callbacks,sim_stop_reason,sim_read,sim_load): Likewise.
987 (enum interrupt_type): New enum.
988 (interrupt_names): New global.
989 (do_interrupt): New function.
990 (sim_open): Define differently if WITH_COMMON.
991 (sim_close,sim_create_inferior,sim_do_command): Likewise.
992 * mn10300_sim.h ({load,store}_{byte,half,word}): Define versions
993 for WITH_COMMON.
994 * mn10300.igen: New file.
995 * mn10300.dc: New file.
996 * op_utils.c: New file.
997 * sim-main.h: New file.
998
999Wed Mar 18 12:38:12 1998 Andrew Cagney <cagney@b1.cygnus.com>
1000
1001 * configure: Regenerated to track ../common/aclocal.m4 changes.
1002
1003Fri Feb 27 18:36:04 1998 Jeffrey A Law (law@cygnus.com)
1004
1005 * simops.c (inc): Fix typo.
1006
1007Wed Feb 25 01:59:29 1998 Jeffrey A Law (law@cygnus.com)
1008
72f4393d
L
1009 * simops.c (signed multiply instructions): Cast input operands to
1010 signed32 before casting them to signed64 so that the sign bit
1011 is propagated properly.
c906108c
SS
1012
1013Mon Feb 23 20:23:19 1998 Mark Alexander <marka@cygnus.com>
1014
1015 * Makefile.in: Last change was bad. Define NL_TARGET
1016 so that targ-vals.h will be used instead of syscall.h.
1017 * simops.c: Use targ-vals.h instead of syscall.h.
1018 (OP_F020): Disable unsupported system calls.
1019
1020Mon Feb 23 09:44:38 1998 Mark Alexander <marka@cygnus.com>
1021
1022 * Makefile.in: Get header files from libgloss/mn10300/sys.
1023
1024Sun Feb 22 16:02:24 1998 Jeffrey A Law (law@cygnus.com)
1025
1026 * simops.c: Include sim-types.h.
1027
1028Wed Feb 18 13:07:08 1998 Jeffrey A Law (law@cygnus.com)
1029
1030 * simops.c (multiply instructions): Cast input operands to a
1031 signed64/unsigned64 type as appropriate.
1032
1033Tue Feb 17 12:47:16 1998 Andrew Cagney <cagney@b1.cygnus.com>
1034
1035 * interp.c (sim_store_register, sim_fetch_register): Pass in
1036 length parameter. Return -1.
1037
1038Sun Feb 1 16:47:51 1998 Andrew Cagney <cagney@b1.cygnus.com>
1039
1040 * configure: Regenerated to track ../common/aclocal.m4 changes.
1041
1042Sat Jan 31 18:15:41 1998 Andrew Cagney <cagney@b1.cygnus.com>
1043
1044 * configure: Regenerated to track ../common/aclocal.m4 changes.
1045
1046Mon Jan 19 22:26:29 1998 Doug Evans <devans@seba>
1047
1048 * configure: Regenerated to track ../common/aclocal.m4 changes.
1049
1050Mon Dec 15 23:17:11 1997 Andrew Cagney <cagney@b1.cygnus.com>
1051
1052 * configure: Regenerated to track ../common/aclocal.m4 changes.
1053 * config.in: Ditto.
1054
1055Thu Dec 4 09:21:05 1997 Doug Evans <devans@canuck.cygnus.com>
1056
1057 * configure: Regenerated to track ../common/aclocal.m4 changes.
1058
1059Tue Nov 11 10:38:52 1997 Jeffrey A Law (law@cygnus.com)
1060
1061 * simops.c (call:16 call:32): Stack adjustment is determined solely
1062 by the imm8 field.
1063
1064Wed Oct 22 14:43:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
1065
1066 * interp.c (sim_load): Pass lma_p and sim_write args to
1067 sim_load_file.
1068
1069Tue Oct 21 10:12:03 1997 Jeffrey A Law (law@cygnus.com)
1070
1071 * simops.c: Correctly handle register restores for "ret" and "retf"
1072 instructions.
1073
1074Fri Oct 3 09:28:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
1075
1076 * configure: Regenerated to track ../common/aclocal.m4 changes.
1077
1078Wed Sep 24 17:38:57 1997 Andrew Cagney <cagney@b1.cygnus.com>
1079
1080 * configure: Regenerated to track ../common/aclocal.m4 changes.
1081
1082Tue Sep 23 11:04:38 1997 Andrew Cagney <cagney@b1.cygnus.com>
1083
1084 * configure: Regenerated to track ../common/aclocal.m4 changes.
1085
1086Mon Sep 22 11:46:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
1087
1088 * configure: Regenerated to track ../common/aclocal.m4 changes.
1089
1090Fri Sep 19 17:45:25 1997 Andrew Cagney <cagney@b1.cygnus.com>
1091
1092 * configure: Regenerated to track ../common/aclocal.m4 changes.
1093
1094Mon Sep 15 17:36:15 1997 Andrew Cagney <cagney@b1.cygnus.com>
1095
1096 * configure: Regenerated to track ../common/aclocal.m4 changes.
1097
1098Thu Sep 4 17:21:23 1997 Doug Evans <dje@seba>
1099
1100 * configure: Regenerated to track ../common/aclocal.m4 changes.
1101
1102Wed Aug 27 18:13:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
1103
1104 * configure: Regenerated to track ../common/aclocal.m4 changes.
1105 * config.in: Ditto.
1106
1107Tue Aug 26 10:41:07 1997 Andrew Cagney <cagney@b1.cygnus.com>
1108
1109 * interp.c (sim_kill): Delete.
1110 (sim_create_inferior): Add ABFD argument.
1111 (sim_load): Move setting of PC from here.
72f4393d 1112 (sim_create_inferior): To here.
c906108c
SS
1113
1114Mon Aug 25 17:50:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
1115
1116 * configure: Regenerated to track ../common/aclocal.m4 changes.
1117 * config.in: Ditto.
1118
1119Mon Aug 25 16:14:44 1997 Andrew Cagney <cagney@b1.cygnus.com>
1120
1121 * interp.c (sim_open): Add ABFD argument.
1122
1123Tue Jun 24 13:46:20 1997 Jeffrey A Law (law@cygnus.com)
1124
1125 * interp.c (sim_resume): Clear State.exited.
1126 (sim_stop_reason): If State.exited is nonzero, then indicate that
1127 the simulator exited instead of stopped.
1128 * mn10300_sim.h (struct _state): Add exited field.
1129 * simops.c (syscall): Set State.exited for SYS_exit.
1130
1131Wed Jun 11 22:07:56 1997 Jeffrey A Law (law@cygnus.com)
1132
1133 * simops.c: Fix thinko in last change.
1134
1135Tue Jun 10 12:31:32 1997 Jeffrey A Law (law@cygnus.com)
1136
1137 * simops.c: "call" stores the callee saved registers into the
1138 stack! Update the stack pointer properly when done with
1139 register saves.
1140
1141 * simops.c: Fix return address computation for "call" instructions.
1142
1143Thu May 22 01:43:11 1997 Jeffrey A Law (law@cygnus.com)
1144
1145 * interp.c (sim_open): Fix typo.
1146
1147Wed May 21 23:27:58 1997 Jeffrey A Law (law@cygnus.com)
1148
1149 * interp.c (sim_resume): Add missing case in big switch
1150 statement (for extb instruction).
1151
1152Tue May 20 17:51:30 1997 Jeffrey A Law (law@cygnus.com)
1153
1154 * interp.c: Replace all references to load_mem and store_mem
1155 with references to load_byte, load_half, load_3_byte, load_word
1156 and store_byte, store_half, store_3_byte, store_word.
1157 (INLINE): Delete definition.
1158 (load_mem_big): Likewise.
1159 (max_mem): Make it global.
1160 (dispatch): Make this function inline.
1161 (load_mem, store_mem): Delete functions.
1162 * mn10300_sim.h (INLINE): Define.
1163 (RLW): Delete unused definition.
1164 (load_mem, store_mem): Delete declarations.
1165 (load_mem_big): New definition.
1166 (load_byte, load_half, load_3_byte, load_word): New functions.
1167 (store_byte, store_half, store_3_byte, store_word): New functions.
1168 * simops.c: Replace all references to load_mem and store_mem
1169 with references to load_byte, load_half, load_3_byte, load_word
1170 and store_byte, store_half, store_3_byte, store_word.
1171
1172Tue May 20 10:21:51 1997 Andrew Cagney <cagney@b1.cygnus.com>
1173
1174 * interp.c (sim_open): Add callback to arguments.
1175 (sim_set_callbacks): Delete SIM_DESC argument.
1176
1177Mon May 19 13:54:22 1997 Jeffrey A Law (law@cygnus.com)
1178
1179 * interp.c (dispatch): Make this an inline function.
1180
1181 * simops.c (syscall): Use callback->write regardless of
1182 what file descriptor we're writing too.
1183
1184Sun May 18 16:46:31 1997 Jeffrey A Law (law@cygnus.com)
1185
1186 * interp.c (load_mem_big): Remove function. It's now a macro
1187 defined elsewhere.
1188 (compare_simops): New function.
1189 (sim_open): Sort the Simops table before inserting entries
1190 into the hash table.
1191 * mn10300_sim.h: Remove unused #defines.
1192 (load_mem_big): Define.
1193
1194Fri May 16 16:36:17 1997 Jeffrey A Law (law@cygnus.com)
1195
1196 * interp.c (load_mem): If we get a load from an out of range
1197 address, abort.
1198 (store_mem): Likewise for stores.
1199 (max_mem): New variable.
1200
1201Tue May 6 13:24:36 1997 Jeffrey A Law (law@cygnus.com)
1202
1203 * mn10300_sim.h: Fix ordering of bits in the PSW.
1204
1205 * interp.c: Improve hashing routine to avoid long list
1206 traversals for common instructions. Add HASH_STAT support.
1207 Rewrite opcode dispatch code using a big switch instead of
1208 cascaded if/else statements. Avoid useless calls to load_mem.
1209
1210Mon May 5 18:07:48 1997 Jeffrey A Law (law@cygnus.com)
1211
1212 * mn10300_sim.h (struct _state): Add space for mdrq register.
1213 (REG_MDRQ): Define.
1214 * simops.c: Don't abort for trap. Add support for the extended
1215 instructions, "getx", "putx", "mulq", "mulqu", "sat16", "sat24",
1216 and "bsch".
1217
1218Thu Apr 24 00:39:51 1997 Doug Evans <dje@canuck.cygnus.com>
1219
1220 * configure: Regenerated to track ../common/aclocal.m4 changes.
1221
1222Fri Apr 18 14:04:04 1997 Andrew Cagney <cagney@b1.cygnus.com>
1223
1224 * interp.c (sim_stop): Add stub function.
1225
1226Thu Apr 17 03:26:59 1997 Doug Evans <dje@canuck.cygnus.com>
1227
1228 * Makefile.in (SIM_OBJS): Add sim-load.o.
1229 * interp.c (sim_kind, myname): New static locals.
1230 (sim_open): Set sim_kind, myname. Ignore -E arg.
1231 (sim_load): Return SIM_RC. New arg abfd. Call sim_load_file to
1232 load file into simulator. Set start address from bfd.
1233 (sim_create_inferior): Return SIM_RC. Delete arg start_address.
1234
1235Wed Apr 16 19:30:44 1997 Andrew Cagney <cagney@b1.cygnus.com>
1236
1237 * simops.c (OP_F020): SYS_execv, SYS_time, SYS_times, SYS_utime
1238 only include if implemented by host.
1239 (OP_F020): Typecast arg passed to time function;
1240
1241Mon Apr 7 23:57:49 1997 Jeffrey A Law (law@cygnus.com)
1242
1243 * simops.c (syscall): Handle new mn10300 calling conventions.
1244
1245Mon Apr 7 15:45:02 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1246
1247 * configure: Regenerated to track ../common/aclocal.m4 changes.
1248 * config.in: Ditto.
1249
1250Fri Apr 4 20:02:37 1997 Ian Lance Taylor <ian@cygnus.com>
1251
1252 * Makefile.in: Change mn10300-opc.o to m10300-opc.o, to match
1253 corresponding change in opcodes directory.
1254
1255Wed Apr 2 15:06:28 1997 Doug Evans <dje@canuck.cygnus.com>
1256
1257 * interp.c (sim_open): New arg `kind'.
1258
1259 * configure: Regenerated to track ../common/aclocal.m4 changes.
1260
1261Wed Apr 2 14:34:19 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1262
1263 * configure: Regenerated to track ../common/aclocal.m4 changes.
1264
1265Thu Mar 20 11:58:02 1997 Jeffrey A Law (law@cygnus.com)
1266
1267 * simops.c: Fix register extraction for a two "movbu" variants.
1268 Somewhat simplify "sub" instructions.
1269 Correctly sign extend operands for "mul". Put the correct
1270 half of the result in MDR for "mul" and "mulu".
1271 Implement remaining instructions.
1272 Tweak opcode for "syscall".
1273
1274Tue Mar 18 14:21:21 1997 Jeffrey A Law (law@cygnus.com)
1275
1276 * simops.c: Do syscall emulation in "syscall" instruction. Add
1277 dummy "trap" instruction.
1278
1279Wed Mar 19 01:14:00 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1280
1281 * configure: Regenerated to track ../common/aclocal.m4 changes.
1282
1283Mon Mar 17 15:10:07 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1284
1285 * configure: Re-generate.
1286
1287Fri Mar 14 10:34:11 1997 Michael Meissner <meissner@cygnus.com>
1288
1289 * configure: Regenerate to track ../common/aclocal.m4 changes.
1290
1291Thu Mar 13 12:54:45 1997 Doug Evans <dje@canuck.cygnus.com>
1292
1293 * interp.c (sim_open): New SIM_DESC result. Argument is now
1294 in argv form.
1295 (other sim_*): New SIM_DESC argument.
1296
1297Wed Mar 12 15:04:00 1997 Jeffrey A Law (law@cygnus.com)
1298
1299 * simops.c: Fix carry bit computation for "add" instructions.
1300
1301 * simops.c: Fix typos in bset insns. Fix arguments to store_mem
1302 for bset imm8,(d8,an) and bclr imm8,(d8,an).
1303
1304Wed Mar 5 15:00:10 1997 Jeffrey A Law (law@cygnus.com)
1305
1306 * simops.c: Fix register references when computing Z and N bits
1307 for lsr imm8,dn.
1308
1309Tue Feb 4 13:33:30 1997 Doug Evans <dje@canuck.cygnus.com>
1310
1311 * Makefile.in (@COMMON_MAKEFILE_FRAG): Use
1312 COMMON_{PRE,POST}_CONFIG_FRAG instead.
1313 * configure.in: sinclude ../common/aclocal.m4.
1314 * configure: Regenerated.
1315
1316Fri Jan 24 10:47:25 1997 Jeffrey A Law (law@cygnus.com)
1317
1318 * interp.c (init_system): Allocate 2^19 bytes of space for the
1319 simulator.
1320
1321Thu Jan 23 11:46:23 1997 Stu Grossman (grossman@critters.cygnus.com)
1322
1323 * configure configure.in Makefile.in: Update to new configure
1324 scheme which is more compatible with WinGDB builds.
1325 * configure.in: Improve comment on how to run autoconf.
1326 * configure: Re-run autoconf to get new ../common/aclocal.m4.
1327 * Makefile.in: Use autoconf substitution to install common
1328 makefile fragment.
1329
1330Tue Jan 21 15:03:04 1997 Jeffrey A Law (law@cygnus.com)
1331
1332 * simops.c: Undo last change to "rol" and "ror", original code
1333 was correct!
1334
1335Thu Jan 16 11:28:14 1997 Jeffrey A Law (law@cygnus.com)
1336
1337 * simops.c: Fix "rol" and "ror".
1338
1339Wed Jan 15 06:45:58 1997 Jeffrey A Law (law@cygnus.com)
1340
1341 * simops.c: Fix typo in last change.
1342
1343Mon Jan 13 13:22:35 1997 Jeffrey A Law (law@cygnus.com)
1344
1345 * simops.c: Use REG macros in few places not using them yet.
1346
1347Mon Jan 6 16:21:19 1997 Jeffrey A Law (law@cygnus.com)
1348
1349 * mn10300_sim.h (struct _state): Fix number of registers!
1350
1351Tue Dec 31 16:20:41 1996 Jeffrey A Law (law@cygnus.com)
1352
1353 * mn10300_sim.h (struct _state): Put all registers into a single
1354 array to make gdb implementation easier.
1355 (REG_*): Add definitions for all registers in the state array.
1356 (SEXT32, SEXT40, SEXT44, SEXT60): Remove unused macros.
1357 * simops.c: Related changes.
1358
1359Wed Dec 18 10:10:45 1996 Jeffrey A Law (law@cygnus.com)
1360
1361 * interp.c (sim_resume): Handle 0xff as a single byte insn.
1362
1363 * simops.c: Fix overflow computation for "add" and "inc"
1364 instructions.
1365
1366Mon Dec 16 10:03:52 1996 Jeffrey A Law (law@cygnus.com)
1367
1368 * simops.c: Handle "break" instruction.
1369
1370 * simops.c: Fix restoring the PC for "ret" and "retf" instructions.
1371
1372Wed Dec 11 09:53:10 1996 Jeffrey A Law (law@cygnus.com)
1373
1374 * gencode.c (write_opcodes): Also write out the format of the
1375 opcode.
1376 * mn10300_sim.h (simops): Add "format" field.
1377 * interp.c (sim_resume): Deal with endianness issues here.
1378
1379Tue Dec 10 15:05:37 1996 Jeffrey A Law (law@cygnus.com)
1380
1381 * simops.c (REG0_4): Define.
1382 Use REG0_4 for indexed loads/stores.
1383
1384Sat Dec 7 09:50:28 1996 Jeffrey A Law (law@cygnus.com)
1385
1386 * simops.c (REG0_16): Fix typo.
1387
1388Fri Dec 6 14:13:34 1996 Jeffrey A Law (law@cygnus.com)
1389
1390 * simops.c: Call abort for any instruction that's not currently
1391 simulated.
1392
1393 * simops.c: Define accessor macros to extract register
1394 values from instructions. Use them consistently.
1395
1396 * interp.c: Delete unused global variable "OP".
1397 (sim_resume): Remove unused variable "opcode".
1398 * simops.c: Fix some uninitialized variable problems, add
1399 parens to fix various -Wall warnings.
1400
1401 * gencode.c (write_header): Add "insn" and "extension" arguments
1402 to the OP_* declarations.
1403 (write_template): Similarly for function templates.
1404 * interp.c (insn, extension): Remove global variables. Instead
1405 pass them as arguments to the OP_* functions.
1406 * mn10300_sim.h: Remove decls for "insn" and "extension".
1407 * simops.c (OP_*): Accept "insn" and "extension" as arguments
1408 instead of using globals.
1409
1410Thu Dec 5 22:26:31 1996 Jeffrey A Law (law@cygnus.com)
1411
1412 * simops.c: Fix typos in "mov am,(d16,an)" and "mov am,(d32,an)"
1413
1414 * simops.c: Fix thinkos in last change to "inc dn".
1415
1416Wed Dec 4 10:57:53 1996 Jeffrey A Law (law@cygnus.com)
1417
1418 * simops.c: "add imm,sp" does not effect the condition codes.
1419 "inc dn" does effect the condition codes.
1420
1421Tue Dec 3 17:37:45 1996 Jeffrey A Law (law@cygnus.com)
1422
1423 * simops.c: Treat both operands as signed values for
1424 "div" instruction.
1425
1426 * simops.c: Fix simulation of division instructions.
1427 Fix typos/thinkos in several "cmp" and "sub" instructions.
1428
1429Mon Dec 2 12:31:40 1996 Jeffrey A Law (law@cygnus.com)
1430
1431 * simops.c: Fix carry bit handling in "sub" and "cmp"
1432 instructions.
1433
1434 * simops.c: Fix "mov imm8,an" and "mov imm16,dn".
1435
1436Sun Dec 1 16:05:42 1996 Jeffrey A Law (law@cygnus.com)
1437
1438 * simops.c: Fix overflow computation for many instructions.
1439
1440 * simops.c: Fix "mov dm, an", "movbu dm, (an)", and "movhu dm, (an)".
1441
1442 * simops.c: Fix "mov am, dn".
1443
1444 * simops.c: Fix more bugs in "add imm,an" and
1445 "add imm,dn".
1446
1447Wed Nov 27 09:20:42 1996 Jeffrey A Law (law@cygnus.com)
1448
1449 * simops.c: Fix bugs in "movm" and "add imm,an".
1450
1451 * simops.c: Don't lose the upper 24 bits of the return
1452 pointer in "call" and "calls" instructions. Rough cut
1453 at emulated system calls.
1454
1455 * simops.c: Implement the remaining 5, 6 and 7 byte instructions.
1456
1457 * simops.c: Implement remaining 4 byte instructions.
1458
1459 * simops.c: Implement remaining 3 byte instructions.
1460
1461 * simops.c: Implement remaining 2 byte instructions. Call
1462 abort for instructions we're not implementing now.
1463
1464Tue Nov 26 15:43:41 1996 Jeffrey A Law (law@cygnus.com)
1465
1466 * simops.c: Implement lots of random instructions.
1467
1468 * simops.c: Implement "movm" and "bCC" insns.
1469
1470 * mn10300_sim.h (_state): Add another register (MDR).
1471 (REG_MDR): Define.
1472 * simops.c: Implement "cmp", "calls", "rets", "jmp" and
1473 a few additional random insns.
1474
1475 * mn10300_sim.h (PSW_*): Define for CC status tracking.
1476 (REG_D0, REG_A0, REG_SP): Define.
1477 * simops.c: Implement "add", "addc" and a few other random
1478 instructions.
1479
1480 * gencode.c, interp.c: Snapshot current simulator code.
1481
1482Mon Nov 25 12:46:38 1996 Jeffrey A Law (law@cygnus.com)
1483
1484 * Makefile.in, config.in, configure, configure.in: New files.
1485 * gencode.c, interp.c, mn10300_sim.h, simops.c: New files.
72f4393d 1486
This page took 1.213091 seconds and 4 git commands to generate.