Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * linux/sound/oss/dmasound/dmasound_awacs.c | |
3 | * | |
4 | * PowerMac `AWACS' and `Burgundy' DMA Sound Driver | |
5 | * with some limited support for DACA & Tumbler | |
6 | * | |
7 | * See linux/sound/oss/dmasound/dmasound_core.c for copyright and | |
8 | * history prior to 2001/01/26. | |
9 | * | |
10 | * 26/01/2001 ed 0.1 Iain Sandoe | |
11 | * - added version info. | |
12 | * - moved dbdma command buffer allocation to PMacXXXSqSetup() | |
13 | * - fixed up beep dbdma cmd buffers | |
14 | * | |
15 | * 08/02/2001 [0.2] | |
16 | * - make SNDCTL_DSP_GETFMTS return the correct info for the h/w | |
17 | * - move soft format translations to a separate file | |
18 | * - [0.3] make SNDCTL_DSP_GETCAPS return correct info. | |
19 | * - [0.4] more informative machine name strings. | |
20 | * - [0.5] | |
21 | * - record changes. | |
22 | * - made the default_hard/soft entries. | |
23 | * 04/04/2001 [0.6] | |
24 | * - minor correction to bit assignments in awacs_defs.h | |
25 | * - incorporate mixer changes from 2.2.x back-port. | |
26 | * - take out passthru as a rec input (it isn't). | |
27 | * - make Input Gain slider work the 'right way up'. | |
28 | * - try to make the mixer sliders more logical - so now the | |
29 | * input selectors are just two-state (>50% == ON) and the | |
30 | * Input Gain slider handles the rest of the gain issues. | |
31 | * - try to pick slider representations that most closely match | |
32 | * the actual use - e.g. IGain for input gain... | |
33 | * - first stab at over/under-run detection. | |
34 | * - minor cosmetic changes to IRQ identification. | |
35 | * - fix bug where rates > max would be reported as supported. | |
36 | * - first stab at over/under-run detection. | |
37 | * - make use of i2c for mixer settings conditional on perch | |
38 | * rather than cuda (some machines without perch have cuda). | |
39 | * - fix bug where TX stops when dbdma status comes up "DEAD" | |
40 | * so far only reported on PowerComputing clones ... but. | |
41 | * - put in AWACS/Screamer register write timeouts. | |
42 | * - part way to partitioning the init() stuff | |
43 | * - first pass at 'tumbler' stuff (not support - just an attempt | |
44 | * to allow the driver to load on new G4s). | |
45 | * 01/02/2002 [0.7] - BenH | |
46 | * - all sort of minor bits went in since the latest update, I | |
47 | * bumped the version number for that reason | |
48 | * | |
49 | * 07/26/2002 [0.8] - BenH | |
50 | * - More minor bits since last changelog (I should be more careful | |
51 | * with those) | |
52 | * - Support for snapper & better tumbler integration by Toby Sargeant | |
53 | * - Headphone detect for scremer by Julien Blache | |
54 | * - More tumbler fixed by Andreas Schwab | |
55 | * 11/29/2003 [0.8.1] - Renzo Davoli (King Enzo) | |
56 | * - Support for Snapper line in | |
57 | * - snapper input resampling (for rates < 44100) | |
58 | * - software line gain control | |
59 | */ | |
60 | ||
61 | /* GENERAL FIXME/TODO: check that the assumptions about what is written to | |
62 | mac-io is valid for DACA & Tumbler. | |
63 | ||
64 | This driver is in bad need of a rewrite. The dbdma code has to be split, | |
65 | some proper device-tree parsing code has to be written, etc... | |
66 | */ | |
67 | ||
68 | #include <linux/types.h> | |
69 | #include <linux/module.h> | |
1da177e4 LT |
70 | #include <linux/slab.h> |
71 | #include <linux/init.h> | |
72 | #include <linux/delay.h> | |
73 | #include <linux/soundcard.h> | |
74 | #include <linux/adb.h> | |
75 | #include <linux/nvram.h> | |
76 | #include <linux/tty.h> | |
77 | #include <linux/vt_kern.h> | |
78 | #include <linux/spinlock.h> | |
79 | #include <linux/kmod.h> | |
80 | #include <linux/interrupt.h> | |
81 | #include <linux/input.h> | |
f82945df | 82 | #include <linux/mutex.h> |
1da177e4 LT |
83 | #ifdef CONFIG_ADB_CUDA |
84 | #include <linux/cuda.h> | |
85 | #endif | |
86 | #ifdef CONFIG_ADB_PMU | |
87 | #include <linux/pmu.h> | |
88 | #endif | |
89 | ||
1da177e4 LT |
90 | #include <asm/uaccess.h> |
91 | #include <asm/prom.h> | |
92 | #include <asm/machdep.h> | |
93 | #include <asm/io.h> | |
94 | #include <asm/dbdma.h> | |
95 | #include <asm/pmac_feature.h> | |
96 | #include <asm/irq.h> | |
97 | #include <asm/nvram.h> | |
98 | ||
99 | #include "awacs_defs.h" | |
100 | #include "dmasound.h" | |
101 | #include "tas3001c.h" | |
102 | #include "tas3004.h" | |
103 | #include "tas_common.h" | |
104 | ||
105 | #define DMASOUND_AWACS_REVISION 0 | |
106 | #define DMASOUND_AWACS_EDITION 7 | |
107 | ||
108 | #define AWACS_SNAPPER 110 /* fake revision # for snapper */ | |
109 | #define AWACS_BURGUNDY 100 /* fake revision # for burgundy */ | |
110 | #define AWACS_TUMBLER 90 /* fake revision # for tumbler */ | |
111 | #define AWACS_DACA 80 /* fake revision # for daca (ibook) */ | |
112 | #define AWACS_AWACS 2 /* holding revision for AWACS */ | |
113 | #define AWACS_SCREAMER 3 /* holding revision for Screamer */ | |
114 | /* | |
115 | * Interrupt numbers and addresses, & info obtained from the device tree. | |
116 | */ | |
117 | static int awacs_irq, awacs_tx_irq, awacs_rx_irq; | |
118 | static volatile struct awacs_regs __iomem *awacs; | |
119 | static volatile u32 __iomem *i2s; | |
120 | static volatile struct dbdma_regs __iomem *awacs_txdma, *awacs_rxdma; | |
121 | static int awacs_rate_index; | |
122 | static int awacs_subframe; | |
123 | static struct device_node* awacs_node; | |
124 | static struct device_node* i2s_node; | |
cc5d0189 | 125 | static struct resource awacs_rsrc[3]; |
1da177e4 LT |
126 | |
127 | static char awacs_name[64]; | |
128 | static int awacs_revision; | |
129 | static int awacs_sleeping; | |
f82945df | 130 | static DEFINE_MUTEX(dmasound_mutex); |
1da177e4 LT |
131 | |
132 | static int sound_device_id; /* exists after iMac revA */ | |
133 | static int hw_can_byteswap = 1 ; /* most pmac sound h/w can */ | |
134 | ||
135 | /* model info */ | |
136 | /* To be replaced with better interaction with pmac_feature.c */ | |
137 | static int is_pbook_3X00; | |
138 | static int is_pbook_g3; | |
139 | ||
140 | /* expansion info */ | |
141 | static int has_perch; | |
142 | static int has_ziva; | |
143 | ||
144 | /* for earlier powerbooks which need fiddling with mac-io to enable | |
145 | * cd etc. | |
146 | */ | |
147 | static unsigned char __iomem *latch_base; | |
148 | static unsigned char __iomem *macio_base; | |
149 | ||
150 | /* | |
151 | * Space for the DBDMA command blocks. | |
152 | */ | |
153 | static void *awacs_tx_cmd_space; | |
154 | static volatile struct dbdma_cmd *awacs_tx_cmds; | |
155 | static int number_of_tx_cmd_buffers; | |
156 | ||
157 | static void *awacs_rx_cmd_space; | |
158 | static volatile struct dbdma_cmd *awacs_rx_cmds; | |
159 | static int number_of_rx_cmd_buffers; | |
160 | ||
161 | /* | |
162 | * Cached values of AWACS registers (we can't read them). | |
163 | * Except on the burgundy (and screamer). XXX | |
164 | */ | |
165 | ||
166 | int awacs_reg[8]; | |
167 | int awacs_reg1_save; | |
168 | ||
169 | /* tracking values for the mixer contents | |
170 | */ | |
171 | ||
172 | static int spk_vol; | |
173 | static int line_vol; | |
174 | static int passthru_vol; | |
175 | ||
176 | static int ip_gain; /* mic preamp settings */ | |
177 | static int rec_lev = 0x4545 ; /* default CD gain 69 % */ | |
178 | static int mic_lev; | |
179 | static int cd_lev = 0x6363 ; /* 99 % */ | |
180 | static int line_lev; | |
181 | ||
182 | static int hdp_connected; | |
183 | ||
184 | /* | |
185 | * Stuff for outputting a beep. The values range from -327 to +327 | |
186 | * so we can multiply by an amplitude in the range 0..100 to get a | |
187 | * signed short value to put in the output buffer. | |
188 | */ | |
189 | static short beep_wform[256] = { | |
190 | 0, 40, 79, 117, 153, 187, 218, 245, | |
191 | 269, 288, 304, 316, 323, 327, 327, 324, | |
192 | 318, 310, 299, 288, 275, 262, 249, 236, | |
193 | 224, 213, 204, 196, 190, 186, 183, 182, | |
194 | 182, 183, 186, 189, 192, 196, 200, 203, | |
195 | 206, 208, 209, 209, 209, 207, 204, 201, | |
196 | 197, 193, 188, 183, 179, 174, 170, 166, | |
197 | 163, 161, 160, 159, 159, 160, 161, 162, | |
198 | 164, 166, 168, 169, 171, 171, 171, 170, | |
199 | 169, 167, 163, 159, 155, 150, 144, 139, | |
200 | 133, 128, 122, 117, 113, 110, 107, 105, | |
201 | 103, 103, 103, 103, 104, 104, 105, 105, | |
202 | 105, 103, 101, 97, 92, 86, 78, 68, | |
203 | 58, 45, 32, 18, 3, -11, -26, -41, | |
204 | -55, -68, -79, -88, -95, -100, -102, -102, | |
205 | -99, -93, -85, -75, -62, -48, -33, -16, | |
206 | 0, 16, 33, 48, 62, 75, 85, 93, | |
207 | 99, 102, 102, 100, 95, 88, 79, 68, | |
208 | 55, 41, 26, 11, -3, -18, -32, -45, | |
209 | -58, -68, -78, -86, -92, -97, -101, -103, | |
210 | -105, -105, -105, -104, -104, -103, -103, -103, | |
211 | -103, -105, -107, -110, -113, -117, -122, -128, | |
212 | -133, -139, -144, -150, -155, -159, -163, -167, | |
213 | -169, -170, -171, -171, -171, -169, -168, -166, | |
214 | -164, -162, -161, -160, -159, -159, -160, -161, | |
215 | -163, -166, -170, -174, -179, -183, -188, -193, | |
216 | -197, -201, -204, -207, -209, -209, -209, -208, | |
217 | -206, -203, -200, -196, -192, -189, -186, -183, | |
218 | -182, -182, -183, -186, -190, -196, -204, -213, | |
219 | -224, -236, -249, -262, -275, -288, -299, -310, | |
220 | -318, -324, -327, -327, -323, -316, -304, -288, | |
221 | -269, -245, -218, -187, -153, -117, -79, -40, | |
222 | }; | |
223 | ||
224 | /* beep support */ | |
225 | #define BEEP_SRATE 22050 /* 22050 Hz sample rate */ | |
226 | #define BEEP_BUFLEN 512 | |
227 | #define BEEP_VOLUME 15 /* 0 - 100 */ | |
228 | ||
229 | static int beep_vol = BEEP_VOLUME; | |
230 | static int beep_playing; | |
231 | static int awacs_beep_state; | |
232 | static short *beep_buf; | |
233 | static void *beep_dbdma_cmd_space; | |
234 | static volatile struct dbdma_cmd *beep_dbdma_cmd; | |
235 | ||
236 | /* Burgundy functions */ | |
237 | static void awacs_burgundy_wcw(unsigned addr,unsigned newval); | |
238 | static unsigned awacs_burgundy_rcw(unsigned addr); | |
239 | static void awacs_burgundy_write_volume(unsigned address, int volume); | |
240 | static int awacs_burgundy_read_volume(unsigned address); | |
241 | static void awacs_burgundy_write_mvolume(unsigned address, int volume); | |
242 | static int awacs_burgundy_read_mvolume(unsigned address); | |
243 | ||
244 | /* we will allocate a single 'emergency' dbdma cmd block to use if the | |
245 | tx status comes up "DEAD". This happens on some PowerComputing Pmac | |
246 | clones, either owing to a bug in dbdma or some interaction between | |
247 | IDE and sound. However, this measure would deal with DEAD status if | |
248 | if appeared elsewhere. | |
249 | ||
250 | for the sake of memory efficiency we'll allocate this cmd as part of | |
251 | the beep cmd stuff. | |
252 | */ | |
253 | ||
254 | static volatile struct dbdma_cmd *emergency_dbdma_cmd; | |
255 | ||
8c870933 | 256 | #ifdef CONFIG_PM |
1da177e4 LT |
257 | /* |
258 | * Stuff for restoring after a sleep. | |
259 | */ | |
260 | static int awacs_sleep_notify(struct pmu_sleep_notifier *self, int when); | |
261 | struct pmu_sleep_notifier awacs_sleep_notifier = { | |
262 | awacs_sleep_notify, SLEEP_LEVEL_SOUND, | |
263 | }; | |
8c870933 | 264 | #endif /* CONFIG_PM */ |
1da177e4 LT |
265 | |
266 | /* for (soft) sample rate translations */ | |
267 | int expand_bal; /* Balance factor for expanding (not volume!) */ | |
268 | int expand_read_bal; /* Balance factor for expanding reads (not volume!) */ | |
269 | ||
270 | /*** Low level stuff *********************************************************/ | |
271 | ||
1ef64e67 | 272 | static void *PMacAlloc(unsigned int size, gfp_t flags); |
1da177e4 LT |
273 | static void PMacFree(void *ptr, unsigned int size); |
274 | static int PMacIrqInit(void); | |
275 | #ifdef MODULE | |
276 | static void PMacIrqCleanup(void); | |
277 | #endif | |
278 | static void PMacSilence(void); | |
279 | static void PMacInit(void); | |
280 | static int PMacSetFormat(int format); | |
281 | static int PMacSetVolume(int volume); | |
282 | static void PMacPlay(void); | |
283 | static void PMacRecord(void); | |
284 | static irqreturn_t pmac_awacs_tx_intr(int irq, void *devid, struct pt_regs *regs); | |
285 | static irqreturn_t pmac_awacs_rx_intr(int irq, void *devid, struct pt_regs *regs); | |
286 | static irqreturn_t pmac_awacs_intr(int irq, void *devid, struct pt_regs *regs); | |
287 | static void awacs_write(int val); | |
288 | static int awacs_get_volume(int reg, int lshift); | |
289 | static int awacs_volume_setter(int volume, int n, int mute, int lshift); | |
290 | ||
291 | ||
292 | /*** Mid level stuff **********************************************************/ | |
293 | ||
294 | static int PMacMixerIoctl(u_int cmd, u_long arg); | |
295 | static int PMacWriteSqSetup(void); | |
296 | static int PMacReadSqSetup(void); | |
297 | static void PMacAbortRead(void); | |
298 | ||
299 | extern TRANS transAwacsNormal ; | |
300 | extern TRANS transAwacsExpand ; | |
301 | extern TRANS transAwacsNormalRead ; | |
302 | extern TRANS transAwacsExpandRead ; | |
303 | ||
304 | extern int daca_init(void); | |
305 | extern void daca_cleanup(void); | |
306 | extern int daca_set_volume(uint left_vol, uint right_vol); | |
307 | extern void daca_get_volume(uint * left_vol, uint *right_vol); | |
308 | extern int daca_enter_sleep(void); | |
309 | extern int daca_leave_sleep(void); | |
310 | ||
311 | #define TRY_LOCK() \ | |
f82945df | 312 | if ((rc = mutex_lock_interruptible(&dmasound_mutex)) != 0) \ |
1da177e4 | 313 | return rc; |
f82945df | 314 | #define LOCK() mutex_lock(&dmasound_mutex); |
1da177e4 | 315 | |
f82945df | 316 | #define UNLOCK() mutex_unlock(&dmasound_mutex); |
1da177e4 LT |
317 | |
318 | /* We use different versions that the ones provided in dmasound.h | |
319 | * | |
320 | * FIXME: Use different names ;) | |
321 | */ | |
322 | #undef IOCTL_IN | |
323 | #undef IOCTL_OUT | |
324 | ||
325 | #define IOCTL_IN(arg, ret) \ | |
326 | rc = get_user(ret, (int __user *)(arg)); \ | |
327 | if (rc) break; | |
328 | #define IOCTL_OUT(arg, ret) \ | |
329 | ioctl_return2((int __user *)(arg), ret) | |
330 | ||
331 | static inline int ioctl_return2(int __user *addr, int value) | |
332 | { | |
333 | return value < 0 ? value : put_user(value, addr); | |
334 | } | |
335 | ||
336 | ||
337 | /*** AE - TUMBLER / SNAPPER START ************************************************/ | |
338 | ||
339 | ||
340 | int gpio_audio_reset, gpio_audio_reset_pol; | |
341 | int gpio_amp_mute, gpio_amp_mute_pol; | |
342 | int gpio_headphone_mute, gpio_headphone_mute_pol; | |
343 | int gpio_headphone_detect, gpio_headphone_detect_pol; | |
344 | int gpio_headphone_irq; | |
345 | ||
346 | int | |
347 | setup_audio_gpio(const char *name, const char* compatible, int *gpio_addr, int* gpio_pol) | |
348 | { | |
349 | struct device_node *np; | |
350 | u32* pp; | |
351 | ||
352 | np = find_devices("gpio"); | |
353 | if (!np) | |
354 | return -ENODEV; | |
355 | ||
356 | np = np->child; | |
357 | while(np != 0) { | |
358 | if (name) { | |
359 | char *property = get_property(np,"audio-gpio",NULL); | |
360 | if (property != 0 && strcmp(property,name) == 0) | |
361 | break; | |
362 | } else if (compatible && device_is_compatible(np, compatible)) | |
363 | break; | |
364 | np = np->sibling; | |
365 | } | |
366 | if (!np) | |
367 | return -ENODEV; | |
368 | pp = (u32 *)get_property(np, "AAPL,address", NULL); | |
369 | if (!pp) | |
370 | return -ENODEV; | |
371 | *gpio_addr = (*pp) & 0x0000ffff; | |
372 | pp = (u32 *)get_property(np, "audio-gpio-active-state", NULL); | |
373 | if (pp) | |
374 | *gpio_pol = *pp; | |
375 | else | |
376 | *gpio_pol = 1; | |
0ebfff14 | 377 | return irq_of_parse_and_map(np, 0); |
1da177e4 LT |
378 | } |
379 | ||
380 | static inline void | |
381 | write_audio_gpio(int gpio_addr, int data) | |
382 | { | |
383 | if (!gpio_addr) | |
384 | return; | |
385 | pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, gpio_addr, data ? 0x05 : 0x04); | |
386 | } | |
387 | ||
388 | static inline int | |
389 | read_audio_gpio(int gpio_addr) | |
390 | { | |
391 | if (!gpio_addr) | |
392 | return 0; | |
393 | return ((pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, gpio_addr, 0) & 0x02) !=0); | |
394 | } | |
395 | ||
396 | /* | |
397 | * Headphone interrupt via GPIO (Tumbler, Snapper, DACA) | |
398 | */ | |
399 | static irqreturn_t | |
400 | headphone_intr(int irq, void *devid, struct pt_regs *regs) | |
401 | { | |
402 | unsigned long flags; | |
403 | ||
404 | spin_lock_irqsave(&dmasound.lock, flags); | |
405 | if (read_audio_gpio(gpio_headphone_detect) == gpio_headphone_detect_pol) { | |
406 | printk(KERN_INFO "Audio jack plugged, muting speakers.\n"); | |
407 | write_audio_gpio(gpio_headphone_mute, !gpio_headphone_mute_pol); | |
408 | write_audio_gpio(gpio_amp_mute, gpio_amp_mute_pol); | |
409 | tas_output_device_change(sound_device_id,TAS_OUTPUT_HEADPHONES,0); | |
410 | } else { | |
411 | printk(KERN_INFO "Audio jack unplugged, enabling speakers.\n"); | |
412 | write_audio_gpio(gpio_amp_mute, !gpio_amp_mute_pol); | |
413 | write_audio_gpio(gpio_headphone_mute, gpio_headphone_mute_pol); | |
414 | tas_output_device_change(sound_device_id,TAS_OUTPUT_INTERNAL_SPKR,0); | |
415 | } | |
416 | spin_unlock_irqrestore(&dmasound.lock, flags); | |
417 | return IRQ_HANDLED; | |
418 | } | |
419 | ||
420 | ||
421 | /* Initialize tumbler */ | |
422 | ||
423 | static int | |
424 | tas_dmasound_init(void) | |
425 | { | |
426 | setup_audio_gpio( | |
427 | "audio-hw-reset", | |
428 | NULL, | |
429 | &gpio_audio_reset, | |
430 | &gpio_audio_reset_pol); | |
431 | setup_audio_gpio( | |
432 | "amp-mute", | |
433 | NULL, | |
434 | &gpio_amp_mute, | |
435 | &gpio_amp_mute_pol); | |
436 | setup_audio_gpio("headphone-mute", | |
437 | NULL, | |
438 | &gpio_headphone_mute, | |
439 | &gpio_headphone_mute_pol); | |
440 | gpio_headphone_irq = setup_audio_gpio( | |
441 | "headphone-detect", | |
442 | NULL, | |
443 | &gpio_headphone_detect, | |
444 | &gpio_headphone_detect_pol); | |
445 | /* Fix some broken OF entries in desktop machines */ | |
446 | if (!gpio_headphone_irq) | |
447 | gpio_headphone_irq = setup_audio_gpio( | |
448 | NULL, | |
449 | "keywest-gpio15", | |
450 | &gpio_headphone_detect, | |
451 | &gpio_headphone_detect_pol); | |
452 | ||
453 | write_audio_gpio(gpio_audio_reset, gpio_audio_reset_pol); | |
454 | msleep(100); | |
455 | write_audio_gpio(gpio_audio_reset, !gpio_audio_reset_pol); | |
456 | msleep(100); | |
457 | if (gpio_headphone_irq) { | |
458 | if (request_irq(gpio_headphone_irq,headphone_intr,0,"Headphone detect",NULL) < 0) { | |
459 | printk(KERN_ERR "tumbler: Can't request headphone interrupt\n"); | |
460 | gpio_headphone_irq = 0; | |
461 | } else { | |
462 | u8 val; | |
463 | /* Activate headphone status interrupts */ | |
464 | val = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, gpio_headphone_detect, 0); | |
465 | pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, gpio_headphone_detect, val | 0x80); | |
466 | /* Trigger it */ | |
467 | headphone_intr(0,NULL,NULL); | |
468 | } | |
469 | } | |
470 | if (!gpio_headphone_irq) { | |
471 | /* Some machine enter this case ? */ | |
472 | printk(KERN_WARNING "tumbler: Headphone detect IRQ not found, enabling all outputs !\n"); | |
473 | write_audio_gpio(gpio_amp_mute, !gpio_amp_mute_pol); | |
474 | write_audio_gpio(gpio_headphone_mute, !gpio_headphone_mute_pol); | |
475 | } | |
476 | return 0; | |
477 | } | |
478 | ||
479 | ||
480 | static int | |
481 | tas_dmasound_cleanup(void) | |
482 | { | |
483 | if (gpio_headphone_irq) | |
484 | free_irq(gpio_headphone_irq, NULL); | |
485 | return 0; | |
486 | } | |
487 | ||
488 | /* We don't support 48k yet */ | |
489 | static int tas_freqs[1] = { 44100 } ; | |
490 | static int tas_freqs_ok[1] = { 1 } ; | |
491 | ||
492 | /* don't know what to do really - just have to leave it where | |
493 | * OF left things | |
494 | */ | |
495 | ||
496 | static int | |
497 | tas_set_frame_rate(void) | |
498 | { | |
499 | if (i2s) { | |
500 | out_le32(i2s + (I2S_REG_SERIAL_FORMAT >> 2), 0x41190000); | |
501 | out_le32(i2s + (I2S_REG_DATAWORD_SIZES >> 2), 0x02000200); | |
502 | } | |
503 | dmasound.hard.speed = 44100 ; | |
504 | awacs_rate_index = 0 ; | |
505 | return 44100 ; | |
506 | } | |
507 | ||
508 | static int | |
509 | tas_mixer_ioctl(u_int cmd, u_long arg) | |
510 | { | |
511 | int __user *argp = (int __user *)arg; | |
512 | int data; | |
513 | int rc; | |
514 | ||
515 | rc=tas_device_ioctl(cmd, arg); | |
516 | if (rc != -EINVAL) { | |
517 | return rc; | |
518 | } | |
519 | ||
520 | if ((cmd & ~0xff) == MIXER_WRITE(0) && | |
521 | tas_supported_mixers() & (1<<(cmd & 0xff))) { | |
522 | rc = get_user(data, argp); | |
523 | if (rc<0) return rc; | |
524 | tas_set_mixer_level(cmd & 0xff, data); | |
525 | tas_get_mixer_level(cmd & 0xff, &data); | |
526 | return ioctl_return2(argp, data); | |
527 | } | |
528 | if ((cmd & ~0xff) == MIXER_READ(0) && | |
529 | tas_supported_mixers() & (1<<(cmd & 0xff))) { | |
530 | tas_get_mixer_level(cmd & 0xff, &data); | |
531 | return ioctl_return2(argp, data); | |
532 | } | |
533 | ||
534 | switch(cmd) { | |
535 | case SOUND_MIXER_READ_DEVMASK: | |
536 | data = tas_supported_mixers() | SOUND_MASK_SPEAKER; | |
537 | rc = IOCTL_OUT(arg, data); | |
538 | break; | |
539 | case SOUND_MIXER_READ_STEREODEVS: | |
540 | data = tas_stereo_mixers(); | |
541 | rc = IOCTL_OUT(arg, data); | |
542 | break; | |
543 | case SOUND_MIXER_READ_CAPS: | |
544 | rc = IOCTL_OUT(arg, 0); | |
545 | break; | |
546 | case SOUND_MIXER_READ_RECMASK: | |
547 | // XXX FIXME: find a way to check what is really available */ | |
548 | data = SOUND_MASK_LINE | SOUND_MASK_MIC; | |
549 | rc = IOCTL_OUT(arg, data); | |
550 | break; | |
551 | case SOUND_MIXER_READ_RECSRC: | |
552 | if (awacs_reg[0] & MASK_MUX_AUDIN) | |
553 | data |= SOUND_MASK_LINE; | |
554 | if (awacs_reg[0] & MASK_MUX_MIC) | |
555 | data |= SOUND_MASK_MIC; | |
556 | rc = IOCTL_OUT(arg, data); | |
557 | break; | |
558 | case SOUND_MIXER_WRITE_RECSRC: | |
559 | IOCTL_IN(arg, data); | |
560 | data =0; | |
561 | rc = IOCTL_OUT(arg, data); | |
562 | break; | |
563 | case SOUND_MIXER_WRITE_SPEAKER: /* really bell volume */ | |
564 | IOCTL_IN(arg, data); | |
565 | beep_vol = data & 0xff; | |
566 | /* fall through */ | |
567 | case SOUND_MIXER_READ_SPEAKER: | |
568 | rc = IOCTL_OUT(arg, (beep_vol<<8) | beep_vol); | |
569 | break; | |
570 | case SOUND_MIXER_OUTMASK: | |
571 | case SOUND_MIXER_OUTSRC: | |
572 | default: | |
573 | rc = -EINVAL; | |
574 | } | |
575 | ||
576 | return rc; | |
577 | } | |
578 | ||
579 | static void __init | |
580 | tas_init_frame_rates(unsigned int *prop, unsigned int l) | |
581 | { | |
582 | int i ; | |
583 | if (prop) { | |
584 | for (i=0; i<1; i++) | |
585 | tas_freqs_ok[i] = 0; | |
586 | for (l /= sizeof(int); l > 0; --l) { | |
587 | unsigned int r = *prop++; | |
588 | /* Apple 'Fixed' format */ | |
589 | if (r >= 0x10000) | |
590 | r >>= 16; | |
591 | for (i = 0; i < 1; ++i) { | |
592 | if (r == tas_freqs[i]) { | |
593 | tas_freqs_ok[i] = 1; | |
594 | break; | |
595 | } | |
596 | } | |
597 | } | |
598 | } | |
599 | /* else we assume that all the rates are available */ | |
600 | } | |
601 | ||
602 | ||
603 | /*** AE - TUMBLER / SNAPPER END ************************************************/ | |
604 | ||
605 | ||
606 | ||
607 | /*** Low level stuff *********************************************************/ | |
608 | ||
609 | /* | |
610 | * PCI PowerMac, with AWACS, Screamer, Burgundy, DACA or Tumbler and DBDMA. | |
611 | */ | |
1ef64e67 | 612 | static void *PMacAlloc(unsigned int size, gfp_t flags) |
1da177e4 LT |
613 | { |
614 | return kmalloc(size, flags); | |
615 | } | |
616 | ||
617 | static void PMacFree(void *ptr, unsigned int size) | |
618 | { | |
619 | kfree(ptr); | |
620 | } | |
621 | ||
622 | static int __init PMacIrqInit(void) | |
623 | { | |
624 | if (awacs) | |
625 | if (request_irq(awacs_irq, pmac_awacs_intr, 0, "Built-in Sound misc", NULL)) | |
626 | return 0; | |
627 | if (request_irq(awacs_tx_irq, pmac_awacs_tx_intr, 0, "Built-in Sound out", NULL) | |
628 | || request_irq(awacs_rx_irq, pmac_awacs_rx_intr, 0, "Built-in Sound in", NULL)) | |
629 | return 0; | |
630 | return 1; | |
631 | } | |
632 | ||
633 | #ifdef MODULE | |
634 | static void PMacIrqCleanup(void) | |
635 | { | |
636 | /* turn off input & output dma */ | |
637 | DBDMA_DO_STOP(awacs_txdma); | |
638 | DBDMA_DO_STOP(awacs_rxdma); | |
639 | ||
640 | if (awacs) | |
641 | /* disable interrupts from awacs interface */ | |
642 | out_le32(&awacs->control, in_le32(&awacs->control) & 0xfff); | |
643 | ||
644 | /* Switch off the sound clock */ | |
645 | pmac_call_feature(PMAC_FTR_SOUND_CHIP_ENABLE, awacs_node, 0, 0); | |
646 | /* Make sure proper bits are set on pismo & tipb */ | |
647 | if ((machine_is_compatible("PowerBook3,1") || | |
648 | machine_is_compatible("PowerBook3,2")) && awacs) { | |
649 | awacs_reg[1] |= MASK_PAROUT0 | MASK_PAROUT1; | |
650 | awacs_write(MASK_ADDR1 | awacs_reg[1]); | |
651 | msleep(200); | |
652 | } | |
653 | if (awacs) | |
654 | free_irq(awacs_irq, NULL); | |
655 | free_irq(awacs_tx_irq, NULL); | |
656 | free_irq(awacs_rx_irq, NULL); | |
657 | ||
658 | if (awacs) | |
659 | iounmap(awacs); | |
660 | if (i2s) | |
661 | iounmap(i2s); | |
662 | iounmap(awacs_txdma); | |
663 | iounmap(awacs_rxdma); | |
664 | ||
cc5d0189 BH |
665 | release_mem_region(awacs_rsrc[0].start, |
666 | awacs_rsrc[0].end - awacs_rsrc[0].start + 1); | |
667 | release_mem_region(awacs_rsrc[1].start, | |
668 | awacs_rsrc[1].end - awacs_rsrc[1].start + 1); | |
669 | release_mem_region(awacs_rsrc[2].start, | |
670 | awacs_rsrc[2].end - awacs_rsrc[2].start + 1); | |
1da177e4 | 671 | |
09417379 JJ |
672 | kfree(awacs_tx_cmd_space); |
673 | kfree(awacs_rx_cmd_space); | |
674 | kfree(beep_dbdma_cmd_space); | |
675 | kfree(beep_buf); | |
8c870933 | 676 | #ifdef CONFIG_PM |
1da177e4 LT |
677 | pmu_unregister_sleep_notifier(&awacs_sleep_notifier); |
678 | #endif | |
679 | } | |
680 | #endif /* MODULE */ | |
681 | ||
682 | static void PMacSilence(void) | |
683 | { | |
684 | /* turn off output dma */ | |
685 | DBDMA_DO_STOP(awacs_txdma); | |
686 | } | |
687 | ||
688 | /* don't know what to do really - just have to leave it where | |
689 | * OF left things | |
690 | */ | |
691 | ||
692 | static int daca_set_frame_rate(void) | |
693 | { | |
694 | if (i2s) { | |
695 | out_le32(i2s + (I2S_REG_SERIAL_FORMAT >> 2), 0x41190000); | |
696 | out_le32(i2s + (I2S_REG_DATAWORD_SIZES >> 2), 0x02000200); | |
697 | } | |
698 | dmasound.hard.speed = 44100 ; | |
699 | awacs_rate_index = 0 ; | |
700 | return 44100 ; | |
701 | } | |
702 | ||
703 | static int awacs_freqs[8] = { | |
704 | 44100, 29400, 22050, 17640, 14700, 11025, 8820, 7350 | |
705 | }; | |
706 | static int awacs_freqs_ok[8] = { 1, 1, 1, 1, 1, 1, 1, 1 }; | |
707 | ||
708 | static int | |
709 | awacs_set_frame_rate(int desired, int catch_r) | |
710 | { | |
711 | int tolerance, i = 8 ; | |
712 | /* | |
713 | * If we have a sample rate which is within catchRadius percent | |
714 | * of the requested value, we don't have to expand the samples. | |
715 | * Otherwise choose the next higher rate. | |
716 | * N.B.: burgundy awacs only works at 44100 Hz. | |
717 | */ | |
718 | do { | |
719 | tolerance = catch_r * awacs_freqs[--i] / 100; | |
720 | if (awacs_freqs_ok[i] | |
721 | && dmasound.soft.speed <= awacs_freqs[i] + tolerance) | |
722 | break; | |
723 | } while (i > 0); | |
724 | dmasound.hard.speed = awacs_freqs[i]; | |
725 | awacs_rate_index = i; | |
726 | ||
727 | out_le32(&awacs->control, MASK_IEPC | (i << 8) | 0x11 ); | |
728 | awacs_reg[1] = (awacs_reg[1] & ~MASK_SAMPLERATE) | (i << 3); | |
729 | awacs_write(awacs_reg[1] | MASK_ADDR1); | |
730 | return dmasound.hard.speed; | |
731 | } | |
732 | ||
733 | static int | |
734 | burgundy_set_frame_rate(void) | |
735 | { | |
736 | awacs_rate_index = 0 ; | |
737 | awacs_reg[1] = (awacs_reg[1] & ~MASK_SAMPLERATE) ; | |
738 | /* XXX disable error interrupt on burgundy for now */ | |
739 | out_le32(&awacs->control, MASK_IEPC | 0 | 0x11 | MASK_IEE); | |
740 | return 44100 ; | |
741 | } | |
742 | ||
743 | static int | |
744 | set_frame_rate(int desired, int catch_r) | |
745 | { | |
746 | switch (awacs_revision) { | |
747 | case AWACS_BURGUNDY: | |
748 | dmasound.hard.speed = burgundy_set_frame_rate(); | |
749 | break ; | |
750 | case AWACS_TUMBLER: | |
751 | case AWACS_SNAPPER: | |
752 | dmasound.hard.speed = tas_set_frame_rate(); | |
753 | break ; | |
754 | case AWACS_DACA: | |
755 | dmasound.hard.speed = | |
756 | daca_set_frame_rate(); | |
757 | break ; | |
758 | default: | |
759 | dmasound.hard.speed = awacs_set_frame_rate(desired, | |
760 | catch_r); | |
761 | break ; | |
762 | } | |
763 | return dmasound.hard.speed ; | |
764 | } | |
765 | ||
766 | static void | |
767 | awacs_recalibrate(void) | |
768 | { | |
769 | /* Sorry for the horrible delays... I hope to get that improved | |
770 | * by making the whole PM process asynchronous in a future version | |
771 | */ | |
772 | msleep(750); | |
773 | awacs_reg[1] |= MASK_CMUTE | MASK_AMUTE; | |
774 | awacs_write(awacs_reg[1] | MASK_RECALIBRATE | MASK_ADDR1); | |
775 | msleep(1000); | |
776 | awacs_write(awacs_reg[1] | MASK_ADDR1); | |
777 | } | |
778 | ||
779 | static void PMacInit(void) | |
780 | { | |
781 | int tolerance; | |
782 | ||
783 | switch (dmasound.soft.format) { | |
784 | case AFMT_S16_LE: | |
785 | case AFMT_U16_LE: | |
786 | if (hw_can_byteswap) | |
787 | dmasound.hard.format = AFMT_S16_LE; | |
788 | else | |
789 | dmasound.hard.format = AFMT_S16_BE; | |
790 | break; | |
791 | default: | |
792 | dmasound.hard.format = AFMT_S16_BE; | |
793 | break; | |
794 | } | |
795 | dmasound.hard.stereo = 1; | |
796 | dmasound.hard.size = 16; | |
797 | ||
798 | /* set dmasound.hard.speed - on the basis of what we want (soft) | |
799 | * and the tolerance we'll allow. | |
800 | */ | |
801 | set_frame_rate(dmasound.soft.speed, catchRadius) ; | |
802 | ||
803 | tolerance = (catchRadius * dmasound.hard.speed) / 100; | |
804 | if (dmasound.soft.speed >= dmasound.hard.speed - tolerance) { | |
805 | dmasound.trans_write = &transAwacsNormal; | |
806 | dmasound.trans_read = &transAwacsNormalRead; | |
807 | } else { | |
808 | dmasound.trans_write = &transAwacsExpand; | |
809 | dmasound.trans_read = &transAwacsExpandRead; | |
810 | } | |
811 | ||
812 | if (awacs) { | |
813 | if (hw_can_byteswap && (dmasound.hard.format == AFMT_S16_LE)) | |
814 | out_le32(&awacs->byteswap, BS_VAL); | |
815 | else | |
816 | out_le32(&awacs->byteswap, 0); | |
817 | } | |
818 | ||
819 | expand_bal = -dmasound.soft.speed; | |
820 | expand_read_bal = -dmasound.soft.speed; | |
821 | } | |
822 | ||
823 | static int PMacSetFormat(int format) | |
824 | { | |
825 | int size; | |
826 | int req_format = format; | |
827 | ||
828 | switch (format) { | |
829 | case AFMT_QUERY: | |
830 | return dmasound.soft.format; | |
831 | case AFMT_MU_LAW: | |
832 | case AFMT_A_LAW: | |
833 | case AFMT_U8: | |
834 | case AFMT_S8: | |
835 | size = 8; | |
836 | break; | |
837 | case AFMT_S16_LE: | |
838 | if(!hw_can_byteswap) | |
839 | format = AFMT_S16_BE; | |
840 | case AFMT_S16_BE: | |
841 | size = 16; | |
842 | break; | |
843 | case AFMT_U16_LE: | |
844 | if(!hw_can_byteswap) | |
845 | format = AFMT_U16_BE; | |
846 | case AFMT_U16_BE: | |
847 | size = 16; | |
848 | break; | |
849 | default: /* :-) */ | |
850 | printk(KERN_ERR "dmasound: unknown format 0x%x, using AFMT_U8\n", | |
851 | format); | |
852 | size = 8; | |
853 | format = AFMT_U8; | |
854 | } | |
855 | ||
856 | if (req_format == format) { | |
857 | dmasound.soft.format = format; | |
858 | dmasound.soft.size = size; | |
859 | if (dmasound.minDev == SND_DEV_DSP) { | |
860 | dmasound.dsp.format = format; | |
861 | dmasound.dsp.size = size; | |
862 | } | |
863 | } | |
864 | ||
865 | return format; | |
866 | } | |
867 | ||
868 | #define AWACS_VOLUME_TO_MASK(x) (15 - ((((x) - 1) * 15) / 99)) | |
869 | #define AWACS_MASK_TO_VOLUME(y) (100 - ((y) * 99 / 15)) | |
870 | ||
871 | static int awacs_get_volume(int reg, int lshift) | |
872 | { | |
873 | int volume; | |
874 | ||
875 | volume = AWACS_MASK_TO_VOLUME((reg >> lshift) & 0xf); | |
876 | volume |= AWACS_MASK_TO_VOLUME(reg & 0xf) << 8; | |
877 | return volume; | |
878 | } | |
879 | ||
880 | static int awacs_volume_setter(int volume, int n, int mute, int lshift) | |
881 | { | |
882 | int r1, rn; | |
883 | ||
884 | if (mute && volume == 0) { | |
885 | r1 = awacs_reg[1] | mute; | |
886 | } else { | |
887 | r1 = awacs_reg[1] & ~mute; | |
888 | rn = awacs_reg[n] & ~(0xf | (0xf << lshift)); | |
889 | rn |= ((AWACS_VOLUME_TO_MASK(volume & 0xff) & 0xf) << lshift); | |
890 | rn |= AWACS_VOLUME_TO_MASK((volume >> 8) & 0xff) & 0xf; | |
891 | awacs_reg[n] = rn; | |
892 | awacs_write((n << 12) | rn); | |
893 | volume = awacs_get_volume(rn, lshift); | |
894 | } | |
895 | if (r1 != awacs_reg[1]) { | |
896 | awacs_reg[1] = r1; | |
897 | awacs_write(r1 | MASK_ADDR1); | |
898 | } | |
899 | return volume; | |
900 | } | |
901 | ||
902 | static int PMacSetVolume(int volume) | |
903 | { | |
904 | printk(KERN_WARNING "Bogus call to PMacSetVolume !\n"); | |
905 | return 0; | |
906 | } | |
907 | ||
908 | static void awacs_setup_for_beep(int speed) | |
909 | { | |
910 | out_le32(&awacs->control, | |
911 | (in_le32(&awacs->control) & ~0x1f00) | |
912 | | ((speed > 0 ? speed : awacs_rate_index) << 8)); | |
913 | ||
914 | if (hw_can_byteswap && (dmasound.hard.format == AFMT_S16_LE) && speed == -1) | |
915 | out_le32(&awacs->byteswap, BS_VAL); | |
916 | else | |
917 | out_le32(&awacs->byteswap, 0); | |
918 | } | |
919 | ||
920 | /* CHECK: how much of this *really* needs IRQs masked? */ | |
921 | static void __PMacPlay(void) | |
922 | { | |
923 | volatile struct dbdma_cmd *cp; | |
924 | int next_frg, count; | |
925 | ||
926 | count = 300 ; /* > two cycles at the lowest sample rate */ | |
927 | ||
928 | /* what we want to send next */ | |
929 | next_frg = (write_sq.front + write_sq.active) % write_sq.max_count; | |
930 | ||
931 | if (awacs_beep_state) { | |
932 | /* sound takes precedence over beeps */ | |
933 | /* stop the dma channel */ | |
934 | out_le32(&awacs_txdma->control, (RUN|PAUSE|FLUSH|WAKE) << 16); | |
935 | while ( (in_le32(&awacs_txdma->status) & RUN) && count--) | |
936 | udelay(1); | |
937 | if (awacs) | |
938 | awacs_setup_for_beep(-1); | |
939 | out_le32(&awacs_txdma->cmdptr, | |
940 | virt_to_bus(&(awacs_tx_cmds[next_frg]))); | |
941 | ||
942 | beep_playing = 0; | |
943 | awacs_beep_state = 0; | |
944 | } | |
945 | /* this won't allow more than two frags to be in the output queue at | |
946 | once. (or one, if the max frags is 2 - because count can't exceed | |
947 | 2 in that case) | |
948 | */ | |
949 | while (write_sq.active < 2 && write_sq.active < write_sq.count) { | |
950 | count = (write_sq.count == write_sq.active + 1) ? | |
951 | write_sq.rear_size:write_sq.block_size ; | |
952 | if (count < write_sq.block_size) { | |
953 | if (!write_sq.syncing) /* last block not yet filled,*/ | |
954 | break; /* and we're not syncing or POST-ed */ | |
955 | else { | |
956 | /* pretend the block is full to force a new | |
957 | block to be started on the next write */ | |
958 | write_sq.rear_size = write_sq.block_size ; | |
959 | write_sq.syncing &= ~2 ; /* clear POST */ | |
960 | } | |
961 | } | |
962 | cp = &awacs_tx_cmds[next_frg]; | |
963 | st_le16(&cp->req_count, count); | |
964 | st_le16(&cp->xfer_status, 0); | |
965 | st_le16(&cp->command, OUTPUT_MORE + INTR_ALWAYS); | |
966 | /* put a STOP at the end of the queue - but only if we have | |
967 | space for it. This means that, if we under-run and we only | |
968 | have two fragments, we might re-play sound from an existing | |
969 | queued frag. I guess the solution to that is not to set two | |
970 | frags if you are likely to under-run... | |
971 | */ | |
972 | if (write_sq.count < write_sq.max_count) { | |
973 | if (++next_frg >= write_sq.max_count) | |
974 | next_frg = 0 ; /* wrap */ | |
975 | /* if we get here then we've underrun so we will stop*/ | |
976 | st_le16(&awacs_tx_cmds[next_frg].command, DBDMA_STOP); | |
977 | } | |
978 | /* set the dbdma controller going, if it is not already */ | |
979 | if (write_sq.active == 0) | |
980 | out_le32(&awacs_txdma->cmdptr, virt_to_bus(cp)); | |
981 | (void)in_le32(&awacs_txdma->status); | |
982 | out_le32(&awacs_txdma->control, ((RUN|WAKE) << 16) + (RUN|WAKE)); | |
983 | ++write_sq.active; | |
984 | } | |
985 | } | |
986 | ||
987 | static void PMacPlay(void) | |
988 | { | |
989 | LOCK(); | |
990 | if (!awacs_sleeping) { | |
991 | unsigned long flags; | |
992 | ||
993 | spin_lock_irqsave(&dmasound.lock, flags); | |
994 | __PMacPlay(); | |
995 | spin_unlock_irqrestore(&dmasound.lock, flags); | |
996 | } | |
997 | UNLOCK(); | |
998 | } | |
999 | ||
1000 | static void PMacRecord(void) | |
1001 | { | |
1002 | unsigned long flags; | |
1003 | ||
1004 | if (read_sq.active) | |
1005 | return; | |
1006 | ||
1007 | spin_lock_irqsave(&dmasound.lock, flags); | |
1008 | ||
1009 | /* This is all we have to do......Just start it up. | |
1010 | */ | |
1011 | out_le32(&awacs_rxdma->control, ((RUN|WAKE) << 16) + (RUN|WAKE)); | |
1012 | read_sq.active = 1; | |
1013 | ||
1014 | spin_unlock_irqrestore(&dmasound.lock, flags); | |
1015 | } | |
1016 | ||
1017 | /* if the TX status comes up "DEAD" - reported on some Power Computing machines | |
1018 | we need to re-start the dbdma - but from a different physical start address | |
1019 | and with a different transfer length. It would get very messy to do this | |
1020 | with the normal dbdma_cmd blocks - we would have to re-write the buffer start | |
1021 | addresses each time. So, we will keep a single dbdma_cmd block which can be | |
1022 | fiddled with. | |
1023 | When DEAD status is first reported the content of the faulted dbdma block is | |
1024 | copied into the emergency buffer and we note that the buffer is in use. | |
1025 | we then bump the start physical address by the amount that was successfully | |
1026 | output before it died. | |
1027 | On any subsequent DEAD result we just do the bump-ups (we know that we are | |
1028 | already using the emergency dbdma_cmd). | |
1029 | CHECK: this just tries to "do it". It is possible that we should abandon | |
1030 | xfers when the number of residual bytes gets below a certain value - I can | |
1031 | see that this might cause a loop-forever if too small a transfer causes | |
1032 | DEAD status. However this is a TODO for now - we'll see what gets reported. | |
1033 | When we get a successful transfer result with the emergency buffer we just | |
1034 | pretend that it completed using the original dmdma_cmd and carry on. The | |
1035 | 'next_cmd' field will already point back to the original loop of blocks. | |
1036 | */ | |
1037 | ||
1038 | static irqreturn_t | |
1039 | pmac_awacs_tx_intr(int irq, void *devid, struct pt_regs *regs) | |
1040 | { | |
1041 | int i = write_sq.front; | |
1042 | int stat; | |
1043 | int i_nowrap = write_sq.front; | |
1044 | volatile struct dbdma_cmd *cp; | |
1045 | /* != 0 when we are dealing with a DEAD xfer */ | |
1046 | static int emergency_in_use; | |
1047 | ||
1048 | spin_lock(&dmasound.lock); | |
1049 | while (write_sq.active > 0) { /* we expect to have done something*/ | |
1050 | if (emergency_in_use) /* we are dealing with DEAD xfer */ | |
1051 | cp = emergency_dbdma_cmd ; | |
1052 | else | |
1053 | cp = &awacs_tx_cmds[i]; | |
1054 | stat = ld_le16(&cp->xfer_status); | |
1055 | if (stat & DEAD) { | |
1056 | unsigned short req, res ; | |
1057 | unsigned int phy ; | |
1058 | #ifdef DEBUG_DMASOUND | |
1059 | printk("dmasound_pmac: tx-irq: xfer died - patching it up...\n") ; | |
1060 | #endif | |
1061 | /* to clear DEAD status we must first clear RUN | |
1062 | set it to quiescent to be on the safe side */ | |
1063 | (void)in_le32(&awacs_txdma->status); | |
1064 | out_le32(&awacs_txdma->control, | |
1065 | (RUN|PAUSE|FLUSH|WAKE) << 16); | |
1066 | write_sq.died++ ; | |
1067 | if (!emergency_in_use) { /* new problem */ | |
1068 | memcpy((void *)emergency_dbdma_cmd, (void *)cp, | |
1069 | sizeof(struct dbdma_cmd)); | |
1070 | emergency_in_use = 1; | |
1071 | cp = emergency_dbdma_cmd; | |
1072 | } | |
1073 | /* now bump the values to reflect the amount | |
1074 | we haven't yet shifted */ | |
1075 | req = ld_le16(&cp->req_count); | |
1076 | res = ld_le16(&cp->res_count); | |
1077 | phy = ld_le32(&cp->phy_addr); | |
1078 | phy += (req - res); | |
1079 | st_le16(&cp->req_count, res); | |
1080 | st_le16(&cp->res_count, 0); | |
1081 | st_le16(&cp->xfer_status, 0); | |
1082 | st_le32(&cp->phy_addr, phy); | |
1083 | st_le32(&cp->cmd_dep, virt_to_bus(&awacs_tx_cmds[(i+1)%write_sq.max_count])); | |
1084 | st_le16(&cp->command, OUTPUT_MORE | BR_ALWAYS | INTR_ALWAYS); | |
1085 | ||
1086 | /* point at our patched up command block */ | |
1087 | out_le32(&awacs_txdma->cmdptr, virt_to_bus(cp)); | |
1088 | /* we must re-start the controller */ | |
1089 | (void)in_le32(&awacs_txdma->status); | |
1090 | /* should complete clearing the DEAD status */ | |
1091 | out_le32(&awacs_txdma->control, | |
1092 | ((RUN|WAKE) << 16) + (RUN|WAKE)); | |
1093 | break; /* this block is still going */ | |
1094 | } | |
1095 | if ((stat & ACTIVE) == 0) | |
1096 | break; /* this frame is still going */ | |
1097 | if (emergency_in_use) | |
1098 | emergency_in_use = 0 ; /* done that */ | |
1099 | --write_sq.count; | |
1100 | --write_sq.active; | |
1101 | i_nowrap++; | |
1102 | if (++i >= write_sq.max_count) | |
1103 | i = 0; | |
1104 | } | |
1105 | ||
1106 | /* if we stopped and we were not sync-ing - then we under-ran */ | |
1107 | if( write_sq.syncing == 0 ){ | |
1108 | stat = in_le32(&awacs_txdma->status) ; | |
1109 | /* we hit the dbdma_stop */ | |
1110 | if( (stat & ACTIVE) == 0 ) write_sq.xruns++ ; | |
1111 | } | |
1112 | ||
1113 | /* if we used some data up then wake the writer to supply some more*/ | |
1114 | if (i_nowrap != write_sq.front) | |
1115 | WAKE_UP(write_sq.action_queue); | |
1116 | write_sq.front = i; | |
1117 | ||
1118 | /* but make sure we funnel what we've already got */\ | |
1119 | if (!awacs_sleeping) | |
1120 | __PMacPlay(); | |
1121 | ||
1122 | /* make the wake-on-empty conditional on syncing */ | |
1123 | if (!write_sq.active && (write_sq.syncing & 1)) | |
1124 | WAKE_UP(write_sq.sync_queue); /* any time we're empty */ | |
1125 | spin_unlock(&dmasound.lock); | |
1126 | return IRQ_HANDLED; | |
1127 | } | |
1128 | ||
1129 | ||
1130 | static irqreturn_t | |
1131 | pmac_awacs_rx_intr(int irq, void *devid, struct pt_regs *regs) | |
1132 | { | |
1133 | int stat ; | |
1134 | /* For some reason on my PowerBook G3, I get one interrupt | |
1135 | * when the interrupt vector is installed (like something is | |
1136 | * pending). This happens before the dbdma is initialized by | |
1137 | * us, so I just check the command pointer and if it is zero, | |
1138 | * just blow it off. | |
1139 | */ | |
1140 | if (in_le32(&awacs_rxdma->cmdptr) == 0) | |
1141 | return IRQ_HANDLED; | |
1142 | ||
1143 | /* We also want to blow 'em off when shutting down. | |
1144 | */ | |
1145 | if (read_sq.active == 0) | |
1146 | return IRQ_HANDLED; | |
1147 | ||
1148 | spin_lock(&dmasound.lock); | |
1149 | /* Check multiple buffers in case we were held off from | |
1150 | * interrupt processing for a long time. Geeze, I really hope | |
1151 | * this doesn't happen. | |
1152 | */ | |
1153 | while ((stat=awacs_rx_cmds[read_sq.rear].xfer_status)) { | |
1154 | ||
1155 | /* if we got a "DEAD" status then just log it for now. | |
1156 | and try to restart dma. | |
1157 | TODO: figure out how best to fix it up | |
1158 | */ | |
1159 | if (stat & DEAD){ | |
1160 | #ifdef DEBUG_DMASOUND | |
1161 | printk("dmasound_pmac: rx-irq: DIED - attempting resurection\n"); | |
1162 | #endif | |
1163 | /* to clear DEAD status we must first clear RUN | |
1164 | set it to quiescent to be on the safe side */ | |
1165 | (void)in_le32(&awacs_txdma->status); | |
1166 | out_le32(&awacs_txdma->control, | |
1167 | (RUN|PAUSE|FLUSH|WAKE) << 16); | |
1168 | awacs_rx_cmds[read_sq.rear].xfer_status = 0; | |
1169 | awacs_rx_cmds[read_sq.rear].res_count = 0; | |
1170 | read_sq.died++ ; | |
1171 | (void)in_le32(&awacs_txdma->status); | |
1172 | /* re-start the same block */ | |
1173 | out_le32(&awacs_rxdma->cmdptr, | |
1174 | virt_to_bus(&awacs_rx_cmds[read_sq.rear])); | |
1175 | /* we must re-start the controller */ | |
1176 | (void)in_le32(&awacs_rxdma->status); | |
1177 | /* should complete clearing the DEAD status */ | |
1178 | out_le32(&awacs_rxdma->control, | |
1179 | ((RUN|WAKE) << 16) + (RUN|WAKE)); | |
1180 | spin_unlock(&dmasound.lock); | |
1181 | return IRQ_HANDLED; /* try this block again */ | |
1182 | } | |
1183 | /* Clear status and move on to next buffer. | |
1184 | */ | |
1185 | awacs_rx_cmds[read_sq.rear].xfer_status = 0; | |
1186 | read_sq.rear++; | |
1187 | ||
1188 | /* Wrap the buffer ring. | |
1189 | */ | |
1190 | if (read_sq.rear >= read_sq.max_active) | |
1191 | read_sq.rear = 0; | |
1192 | ||
1193 | /* If we have caught up to the front buffer, bump it. | |
1194 | * This will cause weird (but not fatal) results if the | |
1195 | * read loop is currently using this buffer. The user is | |
1196 | * behind in this case anyway, so weird things are going | |
1197 | * to happen. | |
1198 | */ | |
1199 | if (read_sq.rear == read_sq.front) { | |
1200 | read_sq.front++; | |
1201 | read_sq.xruns++ ; /* we overan */ | |
1202 | if (read_sq.front >= read_sq.max_active) | |
1203 | read_sq.front = 0; | |
1204 | } | |
1205 | } | |
1206 | ||
1207 | WAKE_UP(read_sq.action_queue); | |
1208 | spin_unlock(&dmasound.lock); | |
1209 | return IRQ_HANDLED; | |
1210 | } | |
1211 | ||
1212 | ||
1213 | static irqreturn_t | |
1214 | pmac_awacs_intr(int irq, void *devid, struct pt_regs *regs) | |
1215 | { | |
1216 | int ctrl; | |
1217 | int status; | |
1218 | int r1; | |
1219 | ||
1220 | spin_lock(&dmasound.lock); | |
1221 | ctrl = in_le32(&awacs->control); | |
1222 | status = in_le32(&awacs->codec_stat); | |
1223 | ||
1224 | if (ctrl & MASK_PORTCHG) { | |
1225 | /* tested on Screamer, should work on others too */ | |
1226 | if (awacs_revision == AWACS_SCREAMER) { | |
1227 | if (((status & MASK_HDPCONN) >> 3) && (hdp_connected == 0)) { | |
1228 | hdp_connected = 1; | |
1229 | ||
1230 | r1 = awacs_reg[1] | MASK_SPKMUTE; | |
1231 | awacs_reg[1] = r1; | |
1232 | awacs_write(r1 | MASK_ADDR_MUTE); | |
1233 | } else if (((status & MASK_HDPCONN) >> 3 == 0) && (hdp_connected == 1)) { | |
1234 | hdp_connected = 0; | |
1235 | ||
1236 | r1 = awacs_reg[1] & ~MASK_SPKMUTE; | |
1237 | awacs_reg[1] = r1; | |
1238 | awacs_write(r1 | MASK_ADDR_MUTE); | |
1239 | } | |
1240 | } | |
1241 | } | |
1242 | if (ctrl & MASK_CNTLERR) { | |
1243 | int err = (in_le32(&awacs->codec_stat) & MASK_ERRCODE) >> 16; | |
1244 | /* CHECK: we just swallow burgundy errors at the moment..*/ | |
1245 | if (err != 0 && awacs_revision != AWACS_BURGUNDY) | |
1246 | printk(KERN_ERR "dmasound_pmac: error %x\n", err); | |
1247 | } | |
1248 | /* Writing 1s to the CNTLERR and PORTCHG bits clears them... */ | |
1249 | out_le32(&awacs->control, ctrl); | |
1250 | spin_unlock(&dmasound.lock); | |
1251 | return IRQ_HANDLED; | |
1252 | } | |
1253 | ||
1254 | static void | |
1255 | awacs_write(int val) | |
1256 | { | |
1257 | int count = 300 ; | |
1258 | if (awacs_revision >= AWACS_DACA || !awacs) | |
1259 | return ; | |
1260 | ||
1261 | while ((in_le32(&awacs->codec_ctrl) & MASK_NEWECMD) && count--) | |
1262 | udelay(1) ; /* timeout is > 2 samples at lowest rate */ | |
1263 | out_le32(&awacs->codec_ctrl, val | (awacs_subframe << 22)); | |
1264 | (void)in_le32(&awacs->byteswap); | |
1265 | } | |
1266 | ||
1267 | /* this is called when the beep timer expires... it will be called even | |
1268 | if the beep has been overidden by other sound output. | |
1269 | */ | |
1270 | static void awacs_nosound(unsigned long xx) | |
1271 | { | |
1272 | unsigned long flags; | |
1273 | int count = 600 ; /* > four samples at lowest rate */ | |
1274 | ||
1275 | spin_lock_irqsave(&dmasound.lock, flags); | |
1276 | if (beep_playing) { | |
1277 | st_le16(&beep_dbdma_cmd->command, DBDMA_STOP); | |
1278 | out_le32(&awacs_txdma->control, (RUN|PAUSE|FLUSH|WAKE) << 16); | |
1279 | while ((in_le32(&awacs_txdma->status) & RUN) && count--) | |
1280 | udelay(1); | |
1281 | if (awacs) | |
1282 | awacs_setup_for_beep(-1); | |
1283 | beep_playing = 0; | |
1284 | } | |
1285 | spin_unlock_irqrestore(&dmasound.lock, flags); | |
1286 | } | |
1287 | ||
1288 | /* | |
1289 | * We generate the beep with a single dbdma command that loops a buffer | |
1290 | * forever - without generating interrupts. | |
1291 | * | |
1292 | * So, to stop it you have to stop dma output as per awacs_nosound. | |
1293 | */ | |
1294 | static int awacs_beep_event(struct input_dev *dev, unsigned int type, | |
1295 | unsigned int code, int hz) | |
1296 | { | |
1297 | unsigned long flags; | |
1298 | int beep_speed = 0; | |
1299 | int srate; | |
1300 | int period, ncycles, nsamples; | |
1301 | int i, j, f; | |
1302 | short *p; | |
1303 | static int beep_hz_cache; | |
1304 | static int beep_nsamples_cache; | |
1305 | static int beep_volume_cache; | |
1306 | ||
1307 | if (type != EV_SND) | |
1308 | return -1; | |
1309 | switch (code) { | |
1310 | case SND_BELL: | |
1311 | if (hz) | |
1312 | hz = 1000; | |
1313 | break; | |
1314 | case SND_TONE: | |
1315 | break; | |
1316 | default: | |
1317 | return -1; | |
1318 | } | |
1319 | ||
1320 | if (beep_buf == NULL) | |
1321 | return -1; | |
1322 | ||
1323 | /* quick-hack fix for DACA, Burgundy & Tumbler */ | |
1324 | ||
1325 | if (awacs_revision >= AWACS_DACA){ | |
1326 | srate = 44100 ; | |
1327 | } else { | |
1328 | for (i = 0; i < 8 && awacs_freqs[i] >= BEEP_SRATE; ++i) | |
1329 | if (awacs_freqs_ok[i]) | |
1330 | beep_speed = i; | |
1331 | srate = awacs_freqs[beep_speed]; | |
1332 | } | |
1333 | ||
1334 | if (hz <= srate / BEEP_BUFLEN || hz > srate / 2) { | |
1335 | /* cancel beep currently playing */ | |
1336 | awacs_nosound(0); | |
1337 | return 0; | |
1338 | } | |
1339 | ||
1340 | spin_lock_irqsave(&dmasound.lock, flags); | |
1341 | if (beep_playing || write_sq.active || beep_buf == NULL) { | |
1342 | spin_unlock_irqrestore(&dmasound.lock, flags); | |
1343 | return -1; /* too hard, sorry :-( */ | |
1344 | } | |
1345 | beep_playing = 1; | |
1346 | st_le16(&beep_dbdma_cmd->command, OUTPUT_MORE + BR_ALWAYS); | |
1347 | spin_unlock_irqrestore(&dmasound.lock, flags); | |
1348 | ||
1349 | if (hz == beep_hz_cache && beep_vol == beep_volume_cache) { | |
1350 | nsamples = beep_nsamples_cache; | |
1351 | } else { | |
1352 | period = srate * 256 / hz; /* fixed point */ | |
1353 | ncycles = BEEP_BUFLEN * 256 / period; | |
1354 | nsamples = (period * ncycles) >> 8; | |
1355 | f = ncycles * 65536 / nsamples; | |
1356 | j = 0; | |
1357 | p = beep_buf; | |
1358 | for (i = 0; i < nsamples; ++i, p += 2) { | |
1359 | p[0] = p[1] = beep_wform[j >> 8] * beep_vol; | |
1360 | j = (j + f) & 0xffff; | |
1361 | } | |
1362 | beep_hz_cache = hz; | |
1363 | beep_volume_cache = beep_vol; | |
1364 | beep_nsamples_cache = nsamples; | |
1365 | } | |
1366 | ||
1367 | st_le16(&beep_dbdma_cmd->req_count, nsamples*4); | |
1368 | st_le16(&beep_dbdma_cmd->xfer_status, 0); | |
1369 | st_le32(&beep_dbdma_cmd->cmd_dep, virt_to_bus(beep_dbdma_cmd)); | |
1370 | st_le32(&beep_dbdma_cmd->phy_addr, virt_to_bus(beep_buf)); | |
1371 | awacs_beep_state = 1; | |
1372 | ||
1373 | spin_lock_irqsave(&dmasound.lock, flags); | |
1374 | if (beep_playing) { /* i.e. haven't been terminated already */ | |
1375 | int count = 300 ; | |
1376 | out_le32(&awacs_txdma->control, (RUN|WAKE|FLUSH|PAUSE) << 16); | |
1377 | while ((in_le32(&awacs_txdma->status) & RUN) && count--) | |
1378 | udelay(1); /* timeout > 2 samples at lowest rate*/ | |
1379 | if (awacs) | |
1380 | awacs_setup_for_beep(beep_speed); | |
1381 | out_le32(&awacs_txdma->cmdptr, virt_to_bus(beep_dbdma_cmd)); | |
1382 | (void)in_le32(&awacs_txdma->status); | |
1383 | out_le32(&awacs_txdma->control, RUN | (RUN << 16)); | |
1384 | } | |
1385 | spin_unlock_irqrestore(&dmasound.lock, flags); | |
1386 | ||
1387 | return 0; | |
1388 | } | |
1389 | ||
1390 | /* used in init and for wake-up */ | |
1391 | ||
1392 | static void | |
1393 | load_awacs(void) | |
1394 | { | |
1395 | awacs_write(awacs_reg[0] + MASK_ADDR0); | |
1396 | awacs_write(awacs_reg[1] + MASK_ADDR1); | |
1397 | awacs_write(awacs_reg[2] + MASK_ADDR2); | |
1398 | awacs_write(awacs_reg[4] + MASK_ADDR4); | |
1399 | ||
1400 | if (awacs_revision == AWACS_SCREAMER) { | |
1401 | awacs_write(awacs_reg[5] + MASK_ADDR5); | |
1402 | msleep(100); | |
1403 | awacs_write(awacs_reg[6] + MASK_ADDR6); | |
1404 | msleep(2); | |
1405 | awacs_write(awacs_reg[1] + MASK_ADDR1); | |
1406 | awacs_write(awacs_reg[7] + MASK_ADDR7); | |
1407 | } | |
1408 | if (awacs) { | |
1409 | if (hw_can_byteswap && (dmasound.hard.format == AFMT_S16_LE)) | |
1410 | out_le32(&awacs->byteswap, BS_VAL); | |
1411 | else | |
1412 | out_le32(&awacs->byteswap, 0); | |
1413 | } | |
1414 | } | |
1415 | ||
8c870933 | 1416 | #ifdef CONFIG_PM |
1da177e4 LT |
1417 | /* |
1418 | * Save state when going to sleep, restore it afterwards. | |
1419 | */ | |
1420 | /* FIXME: sort out disabling/re-enabling of read stuff as well */ | |
1421 | static int awacs_sleep_notify(struct pmu_sleep_notifier *self, int when) | |
1422 | { | |
1423 | unsigned long flags; | |
1424 | ||
1425 | switch (when) { | |
1426 | case PBOOK_SLEEP_NOW: | |
1427 | LOCK(); | |
1428 | awacs_sleeping = 1; | |
1429 | /* Tell the rest of the driver we are now going to sleep */ | |
1430 | mb(); | |
1431 | if (awacs_revision == AWACS_SCREAMER || | |
1432 | awacs_revision == AWACS_AWACS) { | |
1433 | awacs_reg1_save = awacs_reg[1]; | |
1434 | awacs_reg[1] |= MASK_AMUTE | MASK_CMUTE; | |
1435 | awacs_write(MASK_ADDR1 | awacs_reg[1]); | |
1436 | } | |
1437 | ||
1438 | PMacSilence(); | |
1439 | /* stop rx - if going - a bit of a daft user... but */ | |
1440 | out_le32(&awacs_rxdma->control, (RUN|WAKE|FLUSH << 16)); | |
1441 | /* deny interrupts */ | |
1442 | if (awacs) | |
1443 | disable_irq(awacs_irq); | |
1444 | disable_irq(awacs_tx_irq); | |
1445 | disable_irq(awacs_rx_irq); | |
1446 | /* Chip specific sleep code */ | |
1447 | switch (awacs_revision) { | |
1448 | case AWACS_TUMBLER: | |
1449 | case AWACS_SNAPPER: | |
1450 | write_audio_gpio(gpio_headphone_mute, gpio_headphone_mute_pol); | |
1451 | write_audio_gpio(gpio_amp_mute, gpio_amp_mute_pol); | |
1452 | tas_enter_sleep(); | |
1453 | write_audio_gpio(gpio_audio_reset, gpio_audio_reset_pol); | |
1454 | break ; | |
1455 | case AWACS_DACA: | |
1456 | daca_enter_sleep(); | |
1457 | break ; | |
1458 | case AWACS_BURGUNDY: | |
1459 | break ; | |
1460 | case AWACS_SCREAMER: | |
1461 | case AWACS_AWACS: | |
1462 | default: | |
1463 | out_le32(&awacs->control, 0x11) ; | |
1464 | break ; | |
1465 | } | |
1466 | /* Disable sound clock */ | |
1467 | pmac_call_feature(PMAC_FTR_SOUND_CHIP_ENABLE, awacs_node, 0, 0); | |
1468 | /* According to Darwin, we do that after turning off the sound | |
1469 | * chip clock. All this will have to be cleaned up once we properly | |
1470 | * parse the OF sound-objects | |
1471 | */ | |
1472 | if ((machine_is_compatible("PowerBook3,1") || | |
1473 | machine_is_compatible("PowerBook3,2")) && awacs) { | |
1474 | awacs_reg[1] |= MASK_PAROUT0 | MASK_PAROUT1; | |
1475 | awacs_write(MASK_ADDR1 | awacs_reg[1]); | |
1476 | msleep(200); | |
1477 | } | |
1478 | break; | |
1479 | case PBOOK_WAKE: | |
1480 | /* Enable sound clock */ | |
1481 | pmac_call_feature(PMAC_FTR_SOUND_CHIP_ENABLE, awacs_node, 0, 1); | |
1482 | if ((machine_is_compatible("PowerBook3,1") || | |
1483 | machine_is_compatible("PowerBook3,2")) && awacs) { | |
1484 | msleep(100); | |
1485 | awacs_reg[1] &= ~(MASK_PAROUT0 | MASK_PAROUT1); | |
1486 | awacs_write(MASK_ADDR1 | awacs_reg[1]); | |
1487 | msleep(300); | |
1488 | } else | |
1489 | msleep(1000); | |
1490 | /* restore settings */ | |
1491 | switch (awacs_revision) { | |
1492 | case AWACS_TUMBLER: | |
1493 | case AWACS_SNAPPER: | |
1494 | write_audio_gpio(gpio_headphone_mute, gpio_headphone_mute_pol); | |
1495 | write_audio_gpio(gpio_amp_mute, gpio_amp_mute_pol); | |
1496 | write_audio_gpio(gpio_audio_reset, gpio_audio_reset_pol); | |
1497 | msleep(100); | |
1498 | write_audio_gpio(gpio_audio_reset, !gpio_audio_reset_pol); | |
1499 | msleep(150); | |
1500 | tas_leave_sleep(); /* Stub for now */ | |
1501 | headphone_intr(0,NULL,NULL); | |
1502 | break; | |
1503 | case AWACS_DACA: | |
1504 | msleep(10); /* Check this !!! */ | |
1505 | daca_leave_sleep(); | |
1506 | break ; /* dont know how yet */ | |
1507 | case AWACS_BURGUNDY: | |
1508 | break ; | |
1509 | case AWACS_SCREAMER: | |
1510 | case AWACS_AWACS: | |
1511 | default: | |
1512 | load_awacs() ; | |
1513 | break ; | |
1514 | } | |
1515 | /* Recalibrate chip */ | |
1516 | if (awacs_revision == AWACS_SCREAMER && awacs) | |
1517 | awacs_recalibrate(); | |
1518 | /* Make sure dma is stopped */ | |
1519 | PMacSilence(); | |
1520 | if (awacs) | |
1521 | enable_irq(awacs_irq); | |
1522 | enable_irq(awacs_tx_irq); | |
1523 | enable_irq(awacs_rx_irq); | |
1524 | if (awacs) { | |
1525 | /* OK, allow ints back again */ | |
1526 | out_le32(&awacs->control, MASK_IEPC | |
1527 | | (awacs_rate_index << 8) | 0x11 | |
1528 | | (awacs_revision < AWACS_DACA ? MASK_IEE: 0)); | |
1529 | } | |
1530 | if (macio_base && is_pbook_g3) { | |
1531 | /* FIXME: should restore the setup we had...*/ | |
1532 | out_8(macio_base + 0x37, 3); | |
1533 | } else if (is_pbook_3X00) { | |
1534 | in_8(latch_base + 0x190); | |
1535 | } | |
1536 | /* Remove mute */ | |
1537 | if (awacs_revision == AWACS_SCREAMER || | |
1538 | awacs_revision == AWACS_AWACS) { | |
1539 | awacs_reg[1] = awacs_reg1_save; | |
1540 | awacs_write(MASK_ADDR1 | awacs_reg[1]); | |
1541 | } | |
1542 | awacs_sleeping = 0; | |
1543 | /* Resume pending sounds. */ | |
1544 | /* we don't try to restart input... */ | |
1545 | spin_lock_irqsave(&dmasound.lock, flags); | |
1546 | __PMacPlay(); | |
1547 | spin_unlock_irqrestore(&dmasound.lock, flags); | |
1548 | UNLOCK(); | |
1549 | } | |
1550 | return PBOOK_SLEEP_OK; | |
1551 | } | |
8c870933 | 1552 | #endif /* CONFIG_PM */ |
1da177e4 LT |
1553 | |
1554 | ||
1555 | /* All the burgundy functions: */ | |
1556 | ||
1557 | /* Waits for busy flag to clear */ | |
77933d72 | 1558 | static inline void |
1da177e4 LT |
1559 | awacs_burgundy_busy_wait(void) |
1560 | { | |
1561 | int count = 50; /* > 2 samples at 44k1 */ | |
1562 | while ((in_le32(&awacs->codec_ctrl) & MASK_NEWECMD) && count--) | |
1563 | udelay(1) ; | |
1564 | } | |
1565 | ||
77933d72 | 1566 | static inline void |
1da177e4 LT |
1567 | awacs_burgundy_extend_wait(void) |
1568 | { | |
1569 | int count = 50 ; /* > 2 samples at 44k1 */ | |
1570 | while ((!(in_le32(&awacs->codec_stat) & MASK_EXTEND)) && count--) | |
1571 | udelay(1) ; | |
1572 | count = 50; | |
1573 | while ((in_le32(&awacs->codec_stat) & MASK_EXTEND) && count--) | |
1574 | udelay(1); | |
1575 | } | |
1576 | ||
1577 | static void | |
1578 | awacs_burgundy_wcw(unsigned addr, unsigned val) | |
1579 | { | |
1580 | out_le32(&awacs->codec_ctrl, addr + 0x200c00 + (val & 0xff)); | |
1581 | awacs_burgundy_busy_wait(); | |
1582 | out_le32(&awacs->codec_ctrl, addr + 0x200d00 +((val>>8) & 0xff)); | |
1583 | awacs_burgundy_busy_wait(); | |
1584 | out_le32(&awacs->codec_ctrl, addr + 0x200e00 +((val>>16) & 0xff)); | |
1585 | awacs_burgundy_busy_wait(); | |
1586 | out_le32(&awacs->codec_ctrl, addr + 0x200f00 +((val>>24) & 0xff)); | |
1587 | awacs_burgundy_busy_wait(); | |
1588 | } | |
1589 | ||
1590 | static unsigned | |
1591 | awacs_burgundy_rcw(unsigned addr) | |
1592 | { | |
1593 | unsigned val = 0; | |
1594 | unsigned long flags; | |
1595 | ||
1596 | /* should have timeouts here */ | |
1597 | spin_lock_irqsave(&dmasound.lock, flags); | |
1598 | ||
1599 | out_le32(&awacs->codec_ctrl, addr + 0x100000); | |
1600 | awacs_burgundy_busy_wait(); | |
1601 | awacs_burgundy_extend_wait(); | |
1602 | val += (in_le32(&awacs->codec_stat) >> 4) & 0xff; | |
1603 | ||
1604 | out_le32(&awacs->codec_ctrl, addr + 0x100100); | |
1605 | awacs_burgundy_busy_wait(); | |
1606 | awacs_burgundy_extend_wait(); | |
1607 | val += ((in_le32(&awacs->codec_stat)>>4) & 0xff) <<8; | |
1608 | ||
1609 | out_le32(&awacs->codec_ctrl, addr + 0x100200); | |
1610 | awacs_burgundy_busy_wait(); | |
1611 | awacs_burgundy_extend_wait(); | |
1612 | val += ((in_le32(&awacs->codec_stat)>>4) & 0xff) <<16; | |
1613 | ||
1614 | out_le32(&awacs->codec_ctrl, addr + 0x100300); | |
1615 | awacs_burgundy_busy_wait(); | |
1616 | awacs_burgundy_extend_wait(); | |
1617 | val += ((in_le32(&awacs->codec_stat)>>4) & 0xff) <<24; | |
1618 | ||
1619 | spin_unlock_irqrestore(&dmasound.lock, flags); | |
1620 | ||
1621 | return val; | |
1622 | } | |
1623 | ||
1624 | ||
1625 | static void | |
1626 | awacs_burgundy_wcb(unsigned addr, unsigned val) | |
1627 | { | |
1628 | out_le32(&awacs->codec_ctrl, addr + 0x300000 + (val & 0xff)); | |
1629 | awacs_burgundy_busy_wait(); | |
1630 | } | |
1631 | ||
1632 | static unsigned | |
1633 | awacs_burgundy_rcb(unsigned addr) | |
1634 | { | |
1635 | unsigned val = 0; | |
1636 | unsigned long flags; | |
1637 | ||
1638 | /* should have timeouts here */ | |
1639 | spin_lock_irqsave(&dmasound.lock, flags); | |
1640 | ||
1641 | out_le32(&awacs->codec_ctrl, addr + 0x100000); | |
1642 | awacs_burgundy_busy_wait(); | |
1643 | awacs_burgundy_extend_wait(); | |
1644 | val += (in_le32(&awacs->codec_stat) >> 4) & 0xff; | |
1645 | ||
1646 | spin_unlock_irqrestore(&dmasound.lock, flags); | |
1647 | ||
1648 | return val; | |
1649 | } | |
1650 | ||
1651 | static int | |
1652 | awacs_burgundy_check(void) | |
1653 | { | |
1654 | /* Checks to see the chip is alive and kicking */ | |
1655 | int error = in_le32(&awacs->codec_ctrl) & MASK_ERRCODE; | |
1656 | ||
1657 | return error == 0xf0000; | |
1658 | } | |
1659 | ||
1660 | static int | |
1661 | awacs_burgundy_init(void) | |
1662 | { | |
1663 | if (awacs_burgundy_check()) { | |
1664 | printk(KERN_WARNING "dmasound_pmac: burgundy not working :-(\n"); | |
1665 | return 1; | |
1666 | } | |
1667 | ||
1668 | awacs_burgundy_wcb(MASK_ADDR_BURGUNDY_OUTPUTENABLES, | |
1669 | DEF_BURGUNDY_OUTPUTENABLES); | |
1670 | awacs_burgundy_wcb(MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES, | |
1671 | DEF_BURGUNDY_MORE_OUTPUTENABLES); | |
1672 | awacs_burgundy_wcw(MASK_ADDR_BURGUNDY_OUTPUTSELECTS, | |
1673 | DEF_BURGUNDY_OUTPUTSELECTS); | |
1674 | ||
1675 | awacs_burgundy_wcb(MASK_ADDR_BURGUNDY_INPSEL21, | |
1676 | DEF_BURGUNDY_INPSEL21); | |
1677 | awacs_burgundy_wcb(MASK_ADDR_BURGUNDY_INPSEL3, | |
1678 | DEF_BURGUNDY_INPSEL3); | |
1679 | awacs_burgundy_wcb(MASK_ADDR_BURGUNDY_GAINCD, | |
1680 | DEF_BURGUNDY_GAINCD); | |
1681 | awacs_burgundy_wcb(MASK_ADDR_BURGUNDY_GAINLINE, | |
1682 | DEF_BURGUNDY_GAINLINE); | |
1683 | awacs_burgundy_wcb(MASK_ADDR_BURGUNDY_GAINMIC, | |
1684 | DEF_BURGUNDY_GAINMIC); | |
1685 | awacs_burgundy_wcb(MASK_ADDR_BURGUNDY_GAINMODEM, | |
1686 | DEF_BURGUNDY_GAINMODEM); | |
1687 | ||
1688 | awacs_burgundy_wcb(MASK_ADDR_BURGUNDY_ATTENSPEAKER, | |
1689 | DEF_BURGUNDY_ATTENSPEAKER); | |
1690 | awacs_burgundy_wcb(MASK_ADDR_BURGUNDY_ATTENLINEOUT, | |
1691 | DEF_BURGUNDY_ATTENLINEOUT); | |
1692 | awacs_burgundy_wcb(MASK_ADDR_BURGUNDY_ATTENHP, | |
1693 | DEF_BURGUNDY_ATTENHP); | |
1694 | ||
1695 | awacs_burgundy_wcw(MASK_ADDR_BURGUNDY_MASTER_VOLUME, | |
1696 | DEF_BURGUNDY_MASTER_VOLUME); | |
1697 | awacs_burgundy_wcw(MASK_ADDR_BURGUNDY_VOLCD, | |
1698 | DEF_BURGUNDY_VOLCD); | |
1699 | awacs_burgundy_wcw(MASK_ADDR_BURGUNDY_VOLLINE, | |
1700 | DEF_BURGUNDY_VOLLINE); | |
1701 | awacs_burgundy_wcw(MASK_ADDR_BURGUNDY_VOLMIC, | |
1702 | DEF_BURGUNDY_VOLMIC); | |
1703 | return 0; | |
1704 | } | |
1705 | ||
1706 | static void | |
1707 | awacs_burgundy_write_volume(unsigned address, int volume) | |
1708 | { | |
1709 | int hardvolume,lvolume,rvolume; | |
1710 | ||
1711 | lvolume = (volume & 0xff) ? (volume & 0xff) + 155 : 0; | |
1712 | rvolume = ((volume >>8)&0xff) ? ((volume >> 8)&0xff ) + 155 : 0; | |
1713 | ||
1714 | hardvolume = lvolume + (rvolume << 16); | |
1715 | ||
1716 | awacs_burgundy_wcw(address, hardvolume); | |
1717 | } | |
1718 | ||
1719 | static int | |
1720 | awacs_burgundy_read_volume(unsigned address) | |
1721 | { | |
1722 | int softvolume,wvolume; | |
1723 | ||
1724 | wvolume = awacs_burgundy_rcw(address); | |
1725 | ||
1726 | softvolume = (wvolume & 0xff) - 155; | |
1727 | softvolume += (((wvolume >> 16) & 0xff) - 155)<<8; | |
1728 | ||
1729 | return softvolume > 0 ? softvolume : 0; | |
1730 | } | |
1731 | ||
1732 | static int | |
1733 | awacs_burgundy_read_mvolume(unsigned address) | |
1734 | { | |
1735 | int lvolume,rvolume,wvolume; | |
1736 | ||
1737 | wvolume = awacs_burgundy_rcw(address); | |
1738 | ||
1739 | wvolume &= 0xffff; | |
1740 | ||
1741 | rvolume = (wvolume & 0xff) - 155; | |
1742 | lvolume = ((wvolume & 0xff00)>>8) - 155; | |
1743 | ||
1744 | return lvolume + (rvolume << 8); | |
1745 | } | |
1746 | ||
1747 | static void | |
1748 | awacs_burgundy_write_mvolume(unsigned address, int volume) | |
1749 | { | |
1750 | int lvolume,rvolume,hardvolume; | |
1751 | ||
1752 | lvolume = (volume &0xff) ? (volume & 0xff) + 155 :0; | |
1753 | rvolume = ((volume >>8) & 0xff) ? (volume >> 8) + 155 :0; | |
1754 | ||
1755 | hardvolume = lvolume + (rvolume << 8); | |
1756 | hardvolume += (hardvolume << 16); | |
1757 | ||
1758 | awacs_burgundy_wcw(address, hardvolume); | |
1759 | } | |
1760 | ||
1761 | /* End burgundy functions */ | |
1762 | ||
1763 | /* Set up output volumes on machines with the 'perch/whisper' extension card. | |
1764 | * this has an SGS i2c chip (7433) which is accessed using the cuda. | |
1765 | * | |
1766 | * TODO: split this out and make use of the other parts of the SGS chip to | |
1767 | * do Bass, Treble etc. | |
1768 | */ | |
1769 | ||
1770 | static void | |
1771 | awacs_enable_amp(int spkr_vol) | |
1772 | { | |
1773 | #ifdef CONFIG_ADB_CUDA | |
1774 | struct adb_request req; | |
1775 | ||
1776 | if (sys_ctrler != SYS_CTRLER_CUDA) | |
1777 | return; | |
1778 | ||
1779 | /* turn on headphones */ | |
1780 | cuda_request(&req, NULL, 5, CUDA_PACKET, CUDA_GET_SET_IIC, | |
1781 | 0x8a, 4, 0); | |
1782 | while (!req.complete) cuda_poll(); | |
1783 | cuda_request(&req, NULL, 5, CUDA_PACKET, CUDA_GET_SET_IIC, | |
1784 | 0x8a, 6, 0); | |
1785 | while (!req.complete) cuda_poll(); | |
1786 | ||
1787 | /* turn on speaker */ | |
1788 | cuda_request(&req, NULL, 5, CUDA_PACKET, CUDA_GET_SET_IIC, | |
1789 | 0x8a, 3, (100 - (spkr_vol & 0xff)) * 32 / 100); | |
1790 | while (!req.complete) cuda_poll(); | |
1791 | cuda_request(&req, NULL, 5, CUDA_PACKET, CUDA_GET_SET_IIC, | |
1792 | 0x8a, 5, (100 - ((spkr_vol >> 8) & 0xff)) * 32 / 100); | |
1793 | while (!req.complete) cuda_poll(); | |
1794 | ||
1795 | cuda_request(&req, NULL, 5, CUDA_PACKET, | |
1796 | CUDA_GET_SET_IIC, 0x8a, 1, 0x29); | |
1797 | while (!req.complete) cuda_poll(); | |
1798 | #endif /* CONFIG_ADB_CUDA */ | |
1799 | } | |
1800 | ||
1801 | ||
1802 | /*** Mid level stuff *********************************************************/ | |
1803 | ||
1804 | ||
1805 | /* | |
1806 | * /dev/mixer abstraction | |
1807 | */ | |
1808 | ||
1809 | static void do_line_lev(int data) | |
1810 | { | |
1811 | line_lev = data ; | |
1812 | awacs_reg[0] &= ~MASK_MUX_AUDIN; | |
1813 | if ((data & 0xff) >= 50) | |
1814 | awacs_reg[0] |= MASK_MUX_AUDIN; | |
1815 | awacs_write(MASK_ADDR0 | awacs_reg[0]); | |
1816 | } | |
1817 | ||
1818 | static void do_ip_gain(int data) | |
1819 | { | |
1820 | ip_gain = data ; | |
1821 | data &= 0xff; | |
1822 | awacs_reg[0] &= ~MASK_GAINLINE; | |
1823 | if (awacs_revision == AWACS_SCREAMER) { | |
1824 | awacs_reg[6] &= ~MASK_MIC_BOOST ; | |
1825 | if (data >= 33) { | |
1826 | awacs_reg[0] |= MASK_GAINLINE; | |
1827 | if( data >= 66) | |
1828 | awacs_reg[6] |= MASK_MIC_BOOST ; | |
1829 | } | |
1830 | awacs_write(MASK_ADDR6 | awacs_reg[6]) ; | |
1831 | } else { | |
1832 | if (data >= 50) | |
1833 | awacs_reg[0] |= MASK_GAINLINE; | |
1834 | } | |
1835 | awacs_write(MASK_ADDR0 | awacs_reg[0]); | |
1836 | } | |
1837 | ||
1838 | static void do_mic_lev(int data) | |
1839 | { | |
1840 | mic_lev = data ; | |
1841 | data &= 0xff; | |
1842 | awacs_reg[0] &= ~MASK_MUX_MIC; | |
1843 | if (data >= 50) | |
1844 | awacs_reg[0] |= MASK_MUX_MIC; | |
1845 | awacs_write(MASK_ADDR0 | awacs_reg[0]); | |
1846 | } | |
1847 | ||
1848 | static void do_cd_lev(int data) | |
1849 | { | |
1850 | cd_lev = data ; | |
1851 | awacs_reg[0] &= ~MASK_MUX_CD; | |
1852 | if ((data & 0xff) >= 50) | |
1853 | awacs_reg[0] |= MASK_MUX_CD; | |
1854 | awacs_write(MASK_ADDR0 | awacs_reg[0]); | |
1855 | } | |
1856 | ||
1857 | static void do_rec_lev(int data) | |
1858 | { | |
1859 | int left, right ; | |
1860 | rec_lev = data ; | |
1861 | /* need to fudge this to use the volume setter routine */ | |
1862 | left = 100 - (data & 0xff) ; if( left < 0 ) left = 0 ; | |
1863 | right = 100 - ((data >> 8) & 0xff) ; if( right < 0 ) right = 0 ; | |
1864 | left |= (right << 8 ); | |
1865 | left = awacs_volume_setter(left, 0, 0, 4); | |
1866 | } | |
1867 | ||
1868 | static void do_passthru_vol(int data) | |
1869 | { | |
1870 | passthru_vol = data ; | |
1871 | awacs_reg[1] &= ~MASK_LOOPTHRU; | |
1872 | if (awacs_revision == AWACS_SCREAMER) { | |
1873 | if( data ) { /* switch it on for non-zero */ | |
1874 | awacs_reg[1] |= MASK_LOOPTHRU; | |
1875 | awacs_write(MASK_ADDR1 | awacs_reg[1]); | |
1876 | } | |
1877 | data = awacs_volume_setter(data, 5, 0, 6) ; | |
1878 | } else { | |
1879 | if ((data & 0xff) >= 50) | |
1880 | awacs_reg[1] |= MASK_LOOPTHRU; | |
1881 | awacs_write(MASK_ADDR1 | awacs_reg[1]); | |
1882 | data = (awacs_reg[1] & MASK_LOOPTHRU)? 100: 0; | |
1883 | } | |
1884 | } | |
1885 | ||
1886 | static int awacs_mixer_ioctl(u_int cmd, u_long arg) | |
1887 | { | |
1888 | int data; | |
1889 | int rc; | |
1890 | ||
1891 | switch (cmd) { | |
1892 | case SOUND_MIXER_READ_CAPS: | |
1893 | /* say we will allow multiple inputs? prob. wrong | |
1894 | so I'm switching it to single */ | |
1895 | return IOCTL_OUT(arg, 1); | |
1896 | case SOUND_MIXER_READ_DEVMASK: | |
1897 | data = SOUND_MASK_VOLUME | SOUND_MASK_SPEAKER | |
1898 | | SOUND_MASK_LINE | SOUND_MASK_MIC | SOUND_MASK_CD | |
1899 | | SOUND_MASK_IGAIN | SOUND_MASK_RECLEV | |
1900 | | SOUND_MASK_ALTPCM | |
1901 | | SOUND_MASK_MONITOR; | |
1902 | rc = IOCTL_OUT(arg, data); | |
1903 | break; | |
1904 | case SOUND_MIXER_READ_RECMASK: | |
1905 | data = SOUND_MASK_LINE | SOUND_MASK_MIC | SOUND_MASK_CD; | |
1906 | rc = IOCTL_OUT(arg, data); | |
1907 | break; | |
1908 | case SOUND_MIXER_READ_RECSRC: | |
1909 | data = 0; | |
1910 | if (awacs_reg[0] & MASK_MUX_AUDIN) | |
1911 | data |= SOUND_MASK_LINE; | |
1912 | if (awacs_reg[0] & MASK_MUX_MIC) | |
1913 | data |= SOUND_MASK_MIC; | |
1914 | if (awacs_reg[0] & MASK_MUX_CD) | |
1915 | data |= SOUND_MASK_CD; | |
1916 | rc = IOCTL_OUT(arg, data); | |
1917 | break; | |
1918 | case SOUND_MIXER_WRITE_RECSRC: | |
1919 | IOCTL_IN(arg, data); | |
1920 | data &= (SOUND_MASK_LINE | SOUND_MASK_MIC | SOUND_MASK_CD); | |
1921 | awacs_reg[0] &= ~(MASK_MUX_CD | MASK_MUX_MIC | |
1922 | | MASK_MUX_AUDIN); | |
1923 | if (data & SOUND_MASK_LINE) | |
1924 | awacs_reg[0] |= MASK_MUX_AUDIN; | |
1925 | if (data & SOUND_MASK_MIC) | |
1926 | awacs_reg[0] |= MASK_MUX_MIC; | |
1927 | if (data & SOUND_MASK_CD) | |
1928 | awacs_reg[0] |= MASK_MUX_CD; | |
1929 | awacs_write(awacs_reg[0] | MASK_ADDR0); | |
1930 | rc = IOCTL_OUT(arg, data); | |
1931 | break; | |
1932 | case SOUND_MIXER_READ_STEREODEVS: | |
1933 | data = SOUND_MASK_VOLUME | SOUND_MASK_SPEAKER| SOUND_MASK_RECLEV ; | |
1934 | if (awacs_revision == AWACS_SCREAMER) | |
1935 | data |= SOUND_MASK_MONITOR ; | |
1936 | rc = IOCTL_OUT(arg, data); | |
1937 | break; | |
1938 | case SOUND_MIXER_WRITE_VOLUME: | |
1939 | IOCTL_IN(arg, data); | |
1940 | line_vol = data ; | |
1941 | awacs_volume_setter(data, 2, 0, 6); | |
1942 | /* fall through */ | |
1943 | case SOUND_MIXER_READ_VOLUME: | |
1944 | rc = IOCTL_OUT(arg, line_vol); | |
1945 | break; | |
1946 | case SOUND_MIXER_WRITE_SPEAKER: | |
1947 | IOCTL_IN(arg, data); | |
1948 | spk_vol = data ; | |
1949 | if (has_perch) | |
1950 | awacs_enable_amp(data); | |
1951 | else | |
1952 | (void)awacs_volume_setter(data, 4, MASK_CMUTE, 6); | |
1953 | /* fall though */ | |
1954 | case SOUND_MIXER_READ_SPEAKER: | |
1955 | rc = IOCTL_OUT(arg, spk_vol); | |
1956 | break; | |
1957 | case SOUND_MIXER_WRITE_ALTPCM: /* really bell volume */ | |
1958 | IOCTL_IN(arg, data); | |
1959 | beep_vol = data & 0xff; | |
1960 | /* fall through */ | |
1961 | case SOUND_MIXER_READ_ALTPCM: | |
1962 | rc = IOCTL_OUT(arg, beep_vol); | |
1963 | break; | |
1964 | case SOUND_MIXER_WRITE_LINE: | |
1965 | IOCTL_IN(arg, data); | |
1966 | do_line_lev(data) ; | |
1967 | /* fall through */ | |
1968 | case SOUND_MIXER_READ_LINE: | |
1969 | rc = IOCTL_OUT(arg, line_lev); | |
1970 | break; | |
1971 | case SOUND_MIXER_WRITE_IGAIN: | |
1972 | IOCTL_IN(arg, data); | |
1973 | do_ip_gain(data) ; | |
1974 | /* fall through */ | |
1975 | case SOUND_MIXER_READ_IGAIN: | |
1976 | rc = IOCTL_OUT(arg, ip_gain); | |
1977 | break; | |
1978 | case SOUND_MIXER_WRITE_MIC: | |
1979 | IOCTL_IN(arg, data); | |
1980 | do_mic_lev(data); | |
1981 | /* fall through */ | |
1982 | case SOUND_MIXER_READ_MIC: | |
1983 | rc = IOCTL_OUT(arg, mic_lev); | |
1984 | break; | |
1985 | case SOUND_MIXER_WRITE_CD: | |
1986 | IOCTL_IN(arg, data); | |
1987 | do_cd_lev(data); | |
1988 | /* fall through */ | |
1989 | case SOUND_MIXER_READ_CD: | |
1990 | rc = IOCTL_OUT(arg, cd_lev); | |
1991 | break; | |
1992 | case SOUND_MIXER_WRITE_RECLEV: | |
1993 | IOCTL_IN(arg, data); | |
1994 | do_rec_lev(data) ; | |
1995 | /* fall through */ | |
1996 | case SOUND_MIXER_READ_RECLEV: | |
1997 | rc = IOCTL_OUT(arg, rec_lev); | |
1998 | break; | |
1999 | case MIXER_WRITE(SOUND_MIXER_MONITOR): | |
2000 | IOCTL_IN(arg, data); | |
2001 | do_passthru_vol(data) ; | |
2002 | /* fall through */ | |
2003 | case MIXER_READ(SOUND_MIXER_MONITOR): | |
2004 | rc = IOCTL_OUT(arg, passthru_vol); | |
2005 | break; | |
2006 | default: | |
2007 | rc = -EINVAL; | |
2008 | } | |
2009 | ||
2010 | return rc; | |
2011 | } | |
2012 | ||
2013 | static void awacs_mixer_init(void) | |
2014 | { | |
2015 | awacs_volume_setter(line_vol, 2, 0, 6); | |
2016 | if (has_perch) | |
2017 | awacs_enable_amp(spk_vol); | |
2018 | else | |
2019 | (void)awacs_volume_setter(spk_vol, 4, MASK_CMUTE, 6); | |
2020 | do_line_lev(line_lev) ; | |
2021 | do_ip_gain(ip_gain) ; | |
2022 | do_mic_lev(mic_lev) ; | |
2023 | do_cd_lev(cd_lev) ; | |
2024 | do_rec_lev(rec_lev) ; | |
2025 | do_passthru_vol(passthru_vol) ; | |
2026 | } | |
2027 | ||
2028 | static int burgundy_mixer_ioctl(u_int cmd, u_long arg) | |
2029 | { | |
2030 | int data; | |
2031 | int rc; | |
2032 | ||
2033 | /* We are, we are, we are... Burgundy or better */ | |
2034 | switch(cmd) { | |
2035 | case SOUND_MIXER_READ_DEVMASK: | |
2036 | data = SOUND_MASK_VOLUME | SOUND_MASK_CD | | |
2037 | SOUND_MASK_LINE | SOUND_MASK_MIC | | |
2038 | SOUND_MASK_SPEAKER | SOUND_MASK_ALTPCM; | |
2039 | rc = IOCTL_OUT(arg, data); | |
2040 | break; | |
2041 | case SOUND_MIXER_READ_RECMASK: | |
2042 | data = SOUND_MASK_LINE | SOUND_MASK_MIC | |
2043 | | SOUND_MASK_CD; | |
2044 | rc = IOCTL_OUT(arg, data); | |
2045 | break; | |
2046 | case SOUND_MIXER_READ_RECSRC: | |
2047 | data = 0; | |
2048 | if (awacs_reg[0] & MASK_MUX_AUDIN) | |
2049 | data |= SOUND_MASK_LINE; | |
2050 | if (awacs_reg[0] & MASK_MUX_MIC) | |
2051 | data |= SOUND_MASK_MIC; | |
2052 | if (awacs_reg[0] & MASK_MUX_CD) | |
2053 | data |= SOUND_MASK_CD; | |
2054 | rc = IOCTL_OUT(arg, data); | |
2055 | break; | |
2056 | case SOUND_MIXER_WRITE_RECSRC: | |
2057 | IOCTL_IN(arg, data); | |
2058 | data &= (SOUND_MASK_LINE | |
2059 | | SOUND_MASK_MIC | SOUND_MASK_CD); | |
2060 | awacs_reg[0] &= ~(MASK_MUX_CD | MASK_MUX_MIC | |
2061 | | MASK_MUX_AUDIN); | |
2062 | if (data & SOUND_MASK_LINE) | |
2063 | awacs_reg[0] |= MASK_MUX_AUDIN; | |
2064 | if (data & SOUND_MASK_MIC) | |
2065 | awacs_reg[0] |= MASK_MUX_MIC; | |
2066 | if (data & SOUND_MASK_CD) | |
2067 | awacs_reg[0] |= MASK_MUX_CD; | |
2068 | awacs_write(awacs_reg[0] | MASK_ADDR0); | |
2069 | rc = IOCTL_OUT(arg, data); | |
2070 | break; | |
2071 | case SOUND_MIXER_READ_STEREODEVS: | |
2072 | data = SOUND_MASK_VOLUME | SOUND_MASK_SPEAKER | |
2073 | | SOUND_MASK_RECLEV | SOUND_MASK_CD | |
2074 | | SOUND_MASK_LINE; | |
2075 | rc = IOCTL_OUT(arg, data); | |
2076 | break; | |
2077 | case SOUND_MIXER_READ_CAPS: | |
2078 | rc = IOCTL_OUT(arg, 0); | |
2079 | break; | |
2080 | case SOUND_MIXER_WRITE_VOLUME: | |
2081 | IOCTL_IN(arg, data); | |
2082 | awacs_burgundy_write_mvolume(MASK_ADDR_BURGUNDY_MASTER_VOLUME, data); | |
2083 | /* Fall through */ | |
2084 | case SOUND_MIXER_READ_VOLUME: | |
2085 | rc = IOCTL_OUT(arg, awacs_burgundy_read_mvolume(MASK_ADDR_BURGUNDY_MASTER_VOLUME)); | |
2086 | break; | |
2087 | case SOUND_MIXER_WRITE_SPEAKER: | |
2088 | IOCTL_IN(arg, data); | |
2089 | if (!(data & 0xff)) { | |
2090 | /* Mute the left speaker */ | |
2091 | awacs_burgundy_wcb(MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES, | |
2092 | awacs_burgundy_rcb(MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES) & ~0x2); | |
2093 | } else { | |
2094 | /* Unmute the left speaker */ | |
2095 | awacs_burgundy_wcb(MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES, | |
2096 | awacs_burgundy_rcb(MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES) | 0x2); | |
2097 | } | |
2098 | if (!(data & 0xff00)) { | |
2099 | /* Mute the right speaker */ | |
2100 | awacs_burgundy_wcb(MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES, | |
2101 | awacs_burgundy_rcb(MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES) & ~0x4); | |
2102 | } else { | |
2103 | /* Unmute the right speaker */ | |
2104 | awacs_burgundy_wcb(MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES, | |
2105 | awacs_burgundy_rcb(MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES) | 0x4); | |
2106 | } | |
2107 | ||
2108 | data = (((data&0xff)*16)/100 > 0xf ? 0xf : | |
2109 | (((data&0xff)*16)/100)) + | |
2110 | ((((data>>8)*16)/100 > 0xf ? 0xf : | |
2111 | ((((data>>8)*16)/100)))<<4); | |
2112 | ||
2113 | awacs_burgundy_wcb(MASK_ADDR_BURGUNDY_ATTENSPEAKER, ~data); | |
2114 | /* Fall through */ | |
2115 | case SOUND_MIXER_READ_SPEAKER: | |
2116 | data = awacs_burgundy_rcb(MASK_ADDR_BURGUNDY_ATTENSPEAKER); | |
2117 | data = (((data & 0xf)*100)/16) + ((((data>>4)*100)/16)<<8); | |
2118 | rc = IOCTL_OUT(arg, (~data) & 0x0000ffff); | |
2119 | break; | |
2120 | case SOUND_MIXER_WRITE_ALTPCM: /* really bell volume */ | |
2121 | IOCTL_IN(arg, data); | |
2122 | beep_vol = data & 0xff; | |
2123 | /* fall through */ | |
2124 | case SOUND_MIXER_READ_ALTPCM: | |
2125 | rc = IOCTL_OUT(arg, beep_vol); | |
2126 | break; | |
2127 | case SOUND_MIXER_WRITE_LINE: | |
2128 | IOCTL_IN(arg, data); | |
2129 | awacs_burgundy_write_volume(MASK_ADDR_BURGUNDY_VOLLINE, data); | |
2130 | ||
2131 | /* fall through */ | |
2132 | case SOUND_MIXER_READ_LINE: | |
2133 | data = awacs_burgundy_read_volume(MASK_ADDR_BURGUNDY_VOLLINE); | |
2134 | rc = IOCTL_OUT(arg, data); | |
2135 | break; | |
2136 | case SOUND_MIXER_WRITE_MIC: | |
2137 | IOCTL_IN(arg, data); | |
2138 | /* Mic is mono device */ | |
2139 | data = (data << 8) + (data << 24); | |
2140 | awacs_burgundy_write_volume(MASK_ADDR_BURGUNDY_VOLMIC, data); | |
2141 | /* fall through */ | |
2142 | case SOUND_MIXER_READ_MIC: | |
2143 | data = awacs_burgundy_read_volume(MASK_ADDR_BURGUNDY_VOLMIC); | |
2144 | data <<= 24; | |
2145 | rc = IOCTL_OUT(arg, data); | |
2146 | break; | |
2147 | case SOUND_MIXER_WRITE_CD: | |
2148 | IOCTL_IN(arg, data); | |
2149 | awacs_burgundy_write_volume(MASK_ADDR_BURGUNDY_VOLCD, data); | |
2150 | /* fall through */ | |
2151 | case SOUND_MIXER_READ_CD: | |
2152 | data = awacs_burgundy_read_volume(MASK_ADDR_BURGUNDY_VOLCD); | |
2153 | rc = IOCTL_OUT(arg, data); | |
2154 | break; | |
2155 | case SOUND_MIXER_WRITE_RECLEV: | |
2156 | IOCTL_IN(arg, data); | |
2157 | data = awacs_volume_setter(data, 0, 0, 4); | |
2158 | rc = IOCTL_OUT(arg, data); | |
2159 | break; | |
2160 | case SOUND_MIXER_READ_RECLEV: | |
2161 | data = awacs_get_volume(awacs_reg[0], 4); | |
2162 | rc = IOCTL_OUT(arg, data); | |
2163 | break; | |
2164 | case SOUND_MIXER_OUTMASK: | |
2165 | case SOUND_MIXER_OUTSRC: | |
2166 | default: | |
2167 | rc = -EINVAL; | |
2168 | } | |
2169 | ||
2170 | return rc; | |
2171 | } | |
2172 | ||
2173 | static int daca_mixer_ioctl(u_int cmd, u_long arg) | |
2174 | { | |
2175 | int data; | |
2176 | int rc; | |
2177 | ||
2178 | /* And the DACA's no genius either! */ | |
2179 | ||
2180 | switch(cmd) { | |
2181 | case SOUND_MIXER_READ_DEVMASK: | |
2182 | data = SOUND_MASK_VOLUME; | |
2183 | rc = IOCTL_OUT(arg, data); | |
2184 | break; | |
2185 | case SOUND_MIXER_READ_RECMASK: | |
2186 | data = 0; | |
2187 | rc = IOCTL_OUT(arg, data); | |
2188 | break; | |
2189 | case SOUND_MIXER_READ_RECSRC: | |
2190 | data = 0; | |
2191 | rc = IOCTL_OUT(arg, data); | |
2192 | break; | |
2193 | case SOUND_MIXER_WRITE_RECSRC: | |
2194 | IOCTL_IN(arg, data); | |
2195 | data =0; | |
2196 | rc = IOCTL_OUT(arg, data); | |
2197 | break; | |
2198 | case SOUND_MIXER_READ_STEREODEVS: | |
2199 | data = SOUND_MASK_VOLUME; | |
2200 | rc = IOCTL_OUT(arg, data); | |
2201 | break; | |
2202 | case SOUND_MIXER_READ_CAPS: | |
2203 | rc = IOCTL_OUT(arg, 0); | |
2204 | break; | |
2205 | case SOUND_MIXER_WRITE_VOLUME: | |
2206 | IOCTL_IN(arg, data); | |
2207 | daca_set_volume(data, data); | |
2208 | /* Fall through */ | |
2209 | case SOUND_MIXER_READ_VOLUME: | |
2210 | daca_get_volume(& data, &data); | |
2211 | rc = IOCTL_OUT(arg, data); | |
2212 | break; | |
2213 | case SOUND_MIXER_OUTMASK: | |
2214 | case SOUND_MIXER_OUTSRC: | |
2215 | default: | |
2216 | rc = -EINVAL; | |
2217 | } | |
2218 | return rc; | |
2219 | } | |
2220 | ||
2221 | static int PMacMixerIoctl(u_int cmd, u_long arg) | |
2222 | { | |
2223 | int rc; | |
2224 | ||
2225 | /* Different IOCTLS for burgundy and, eventually, DACA & Tumbler */ | |
2226 | ||
2227 | TRY_LOCK(); | |
2228 | ||
2229 | switch (awacs_revision){ | |
2230 | case AWACS_BURGUNDY: | |
2231 | rc = burgundy_mixer_ioctl(cmd, arg); | |
2232 | break ; | |
2233 | case AWACS_DACA: | |
2234 | rc = daca_mixer_ioctl(cmd, arg); | |
2235 | break; | |
2236 | case AWACS_TUMBLER: | |
2237 | case AWACS_SNAPPER: | |
2238 | rc = tas_mixer_ioctl(cmd, arg); | |
2239 | break ; | |
2240 | default: /* ;-)) */ | |
2241 | rc = awacs_mixer_ioctl(cmd, arg); | |
2242 | } | |
2243 | ||
2244 | UNLOCK(); | |
2245 | ||
2246 | return rc; | |
2247 | } | |
2248 | ||
2249 | static void PMacMixerInit(void) | |
2250 | { | |
2251 | switch (awacs_revision) { | |
2252 | case AWACS_TUMBLER: | |
2253 | printk("AE-Init tumbler mixer\n"); | |
2254 | break ; | |
2255 | case AWACS_SNAPPER: | |
2256 | printk("AE-Init snapper mixer\n"); | |
2257 | break ; | |
2258 | case AWACS_DACA: | |
2259 | case AWACS_BURGUNDY: | |
2260 | break ; /* don't know yet */ | |
2261 | case AWACS_AWACS: | |
2262 | case AWACS_SCREAMER: | |
2263 | default: | |
2264 | awacs_mixer_init() ; | |
2265 | break ; | |
2266 | } | |
2267 | } | |
2268 | ||
2269 | /* Write/Read sq setup functions: | |
2270 | Check to see if we have enough (or any) dbdma cmd buffers for the | |
2271 | user's fragment settings. If not, allocate some. If this fails we will | |
2272 | point at the beep buffer - as an emergency provision - to stop dma tromping | |
2273 | on some random bit of memory (if someone lets it go anyway). | |
2274 | The command buffers are then set up to point to the fragment buffers | |
2275 | (allocated elsewhere). We need n+1 commands the last of which holds | |
2276 | a NOP + loop to start. | |
2277 | */ | |
2278 | ||
2279 | static int PMacWriteSqSetup(void) | |
2280 | { | |
2281 | int i, count = 600 ; | |
2282 | volatile struct dbdma_cmd *cp; | |
2283 | ||
2284 | LOCK(); | |
2285 | ||
2286 | /* stop the controller from doing any output - if it isn't already. | |
2287 | it _should_ be before this is called anyway */ | |
2288 | ||
2289 | out_le32(&awacs_txdma->control, (RUN|PAUSE|FLUSH|WAKE) << 16); | |
2290 | while ((in_le32(&awacs_txdma->status) & RUN) && count--) | |
2291 | udelay(1); | |
2292 | #ifdef DEBUG_DMASOUND | |
2293 | if (count <= 0) | |
2294 | printk("dmasound_pmac: write sq setup: timeout waiting for dma to stop\n"); | |
2295 | #endif | |
2296 | ||
2297 | if ((write_sq.max_count + 1) > number_of_tx_cmd_buffers) { | |
09417379 | 2298 | kfree(awacs_tx_cmd_space); |
1da177e4 LT |
2299 | number_of_tx_cmd_buffers = 0; |
2300 | ||
2301 | /* we need nbufs + 1 (for the loop) and we should request + 1 | |
2302 | again because the DBDMA_ALIGN might pull the start up by up | |
2303 | to sizeof(struct dbdma_cmd) - 4. | |
2304 | */ | |
2305 | ||
2306 | awacs_tx_cmd_space = kmalloc | |
2307 | ((write_sq.max_count + 1 + 1) * sizeof(struct dbdma_cmd), | |
2308 | GFP_KERNEL); | |
2309 | if (awacs_tx_cmd_space == NULL) { | |
2310 | /* don't leave it dangling - nasty but better than a | |
2311 | random address */ | |
2312 | out_le32(&awacs_txdma->cmdptr, virt_to_bus(beep_dbdma_cmd)); | |
2313 | printk(KERN_ERR | |
2314 | "dmasound_pmac: can't allocate dbdma cmd buffers" | |
2315 | ", driver disabled\n"); | |
2316 | UNLOCK(); | |
2317 | return -ENOMEM; | |
2318 | } | |
2319 | awacs_tx_cmds = (volatile struct dbdma_cmd *) | |
2320 | DBDMA_ALIGN(awacs_tx_cmd_space); | |
2321 | number_of_tx_cmd_buffers = write_sq.max_count + 1; | |
2322 | } | |
2323 | ||
2324 | cp = awacs_tx_cmds; | |
2325 | memset((void *)cp, 0, (write_sq.max_count+1) * sizeof(struct dbdma_cmd)); | |
2326 | for (i = 0; i < write_sq.max_count; ++i, ++cp) { | |
2327 | st_le32(&cp->phy_addr, virt_to_bus(write_sq.buffers[i])); | |
2328 | } | |
2329 | st_le16(&cp->command, DBDMA_NOP + BR_ALWAYS); | |
2330 | st_le32(&cp->cmd_dep, virt_to_bus(awacs_tx_cmds)); | |
2331 | /* point the controller at the command stack - ready to go */ | |
2332 | out_le32(&awacs_txdma->cmdptr, virt_to_bus(awacs_tx_cmds)); | |
2333 | UNLOCK(); | |
2334 | return 0; | |
2335 | } | |
2336 | ||
2337 | static int PMacReadSqSetup(void) | |
2338 | { | |
2339 | int i, count = 600; | |
2340 | volatile struct dbdma_cmd *cp; | |
2341 | ||
2342 | LOCK(); | |
2343 | ||
2344 | /* stop the controller from doing any input - if it isn't already. | |
2345 | it _should_ be before this is called anyway */ | |
2346 | ||
2347 | out_le32(&awacs_rxdma->control, (RUN|PAUSE|FLUSH|WAKE) << 16); | |
2348 | while ((in_le32(&awacs_rxdma->status) & RUN) && count--) | |
2349 | udelay(1); | |
2350 | #ifdef DEBUG_DMASOUND | |
2351 | if (count <= 0) | |
2352 | printk("dmasound_pmac: read sq setup: timeout waiting for dma to stop\n"); | |
2353 | #endif | |
2354 | ||
2355 | if ((read_sq.max_count+1) > number_of_rx_cmd_buffers ) { | |
09417379 | 2356 | kfree(awacs_rx_cmd_space); |
1da177e4 LT |
2357 | number_of_rx_cmd_buffers = 0; |
2358 | ||
2359 | /* we need nbufs + 1 (for the loop) and we should request + 1 again | |
2360 | because the DBDMA_ALIGN might pull the start up by up to | |
2361 | sizeof(struct dbdma_cmd) - 4 (assuming kmalloc aligns 32 bits). | |
2362 | */ | |
2363 | ||
2364 | awacs_rx_cmd_space = kmalloc | |
2365 | ((read_sq.max_count + 1 + 1) * sizeof(struct dbdma_cmd), | |
2366 | GFP_KERNEL); | |
2367 | if (awacs_rx_cmd_space == NULL) { | |
2368 | /* don't leave it dangling - nasty but better than a | |
2369 | random address */ | |
2370 | out_le32(&awacs_rxdma->cmdptr, virt_to_bus(beep_dbdma_cmd)); | |
2371 | printk(KERN_ERR | |
2372 | "dmasound_pmac: can't allocate dbdma cmd buffers" | |
2373 | ", driver disabled\n"); | |
2374 | UNLOCK(); | |
2375 | return -ENOMEM; | |
2376 | } | |
2377 | awacs_rx_cmds = (volatile struct dbdma_cmd *) | |
2378 | DBDMA_ALIGN(awacs_rx_cmd_space); | |
2379 | number_of_rx_cmd_buffers = read_sq.max_count + 1 ; | |
2380 | } | |
2381 | cp = awacs_rx_cmds; | |
2382 | memset((void *)cp, 0, (read_sq.max_count+1) * sizeof(struct dbdma_cmd)); | |
2383 | ||
2384 | /* Set dma buffers up in a loop */ | |
2385 | for (i = 0; i < read_sq.max_count; i++,cp++) { | |
2386 | st_le32(&cp->phy_addr, virt_to_bus(read_sq.buffers[i])); | |
2387 | st_le16(&cp->command, INPUT_MORE + INTR_ALWAYS); | |
2388 | st_le16(&cp->req_count, read_sq.block_size); | |
2389 | st_le16(&cp->xfer_status, 0); | |
2390 | } | |
2391 | ||
2392 | /* The next two lines make the thing loop around. | |
2393 | */ | |
2394 | st_le16(&cp->command, DBDMA_NOP + BR_ALWAYS); | |
2395 | st_le32(&cp->cmd_dep, virt_to_bus(awacs_rx_cmds)); | |
2396 | /* point the controller at the command stack - ready to go */ | |
2397 | out_le32(&awacs_rxdma->cmdptr, virt_to_bus(awacs_rx_cmds)); | |
2398 | ||
2399 | UNLOCK(); | |
2400 | return 0; | |
2401 | } | |
2402 | ||
2403 | /* TODO: this needs work to guarantee that when it returns DMA has stopped | |
2404 | but in a more elegant way than is done here.... | |
2405 | */ | |
2406 | ||
2407 | static void PMacAbortRead(void) | |
2408 | { | |
2409 | int i; | |
2410 | volatile struct dbdma_cmd *cp; | |
2411 | ||
2412 | LOCK(); | |
2413 | /* give it a chance to update the output and provide the IRQ | |
2414 | that is expected. | |
2415 | */ | |
2416 | ||
2417 | out_le32(&awacs_rxdma->control, ((FLUSH) << 16) + FLUSH ); | |
2418 | ||
2419 | cp = awacs_rx_cmds; | |
2420 | for (i = 0; i < read_sq.max_count; i++,cp++) | |
2421 | st_le16(&cp->command, DBDMA_STOP); | |
2422 | /* | |
2423 | * We should probably wait for the thing to stop before we | |
2424 | * release the memory. | |
2425 | */ | |
2426 | ||
2427 | msleep(100) ; /* give it a (small) chance to act */ | |
2428 | ||
2429 | /* apply the sledgehammer approach - just stop it now */ | |
2430 | ||
2431 | out_le32(&awacs_rxdma->control, (RUN|PAUSE|FLUSH|WAKE) << 16); | |
2432 | UNLOCK(); | |
2433 | } | |
2434 | ||
2435 | extern char *get_afmt_string(int); | |
2436 | static int PMacStateInfo(char *b, size_t sp) | |
2437 | { | |
2438 | int i, len = 0; | |
2439 | len = sprintf(b,"HW rates: "); | |
2440 | switch (awacs_revision){ | |
2441 | case AWACS_DACA: | |
2442 | case AWACS_BURGUNDY: | |
2443 | len += sprintf(b,"44100 ") ; | |
2444 | break ; | |
2445 | case AWACS_TUMBLER: | |
2446 | case AWACS_SNAPPER: | |
2447 | for (i=0; i<1; i++){ | |
2448 | if (tas_freqs_ok[i]) | |
2449 | len += sprintf(b+len,"%d ", tas_freqs[i]) ; | |
2450 | } | |
2451 | break ; | |
2452 | case AWACS_AWACS: | |
2453 | case AWACS_SCREAMER: | |
2454 | default: | |
2455 | for (i=0; i<8; i++){ | |
2456 | if (awacs_freqs_ok[i]) | |
2457 | len += sprintf(b+len,"%d ", awacs_freqs[i]) ; | |
2458 | } | |
2459 | break ; | |
2460 | } | |
2461 | len += sprintf(b+len,"s/sec\n") ; | |
2462 | if (len < sp) { | |
2463 | len += sprintf(b+len,"HW AFMTS: "); | |
2464 | i = AFMT_U16_BE ; | |
2465 | while (i) { | |
2466 | if (i & dmasound.mach.hardware_afmts) | |
2467 | len += sprintf(b+len,"%s ", | |
2468 | get_afmt_string(i & dmasound.mach.hardware_afmts)); | |
2469 | i >>= 1 ; | |
2470 | } | |
2471 | len += sprintf(b+len,"\n") ; | |
2472 | } | |
2473 | return len ; | |
2474 | } | |
2475 | ||
2476 | /*** Machine definitions *****************************************************/ | |
2477 | ||
2478 | static SETTINGS def_hard = { | |
2479 | .format = AFMT_S16_BE, | |
2480 | .stereo = 1, | |
2481 | .size = 16, | |
2482 | .speed = 44100 | |
2483 | } ; | |
2484 | ||
2485 | static SETTINGS def_soft = { | |
2486 | .format = AFMT_S16_BE, | |
2487 | .stereo = 1, | |
2488 | .size = 16, | |
2489 | .speed = 44100 | |
2490 | } ; | |
2491 | ||
2492 | static MACHINE machPMac = { | |
2493 | .name = awacs_name, | |
2494 | .name2 = "PowerMac Built-in Sound", | |
2495 | .owner = THIS_MODULE, | |
2496 | .dma_alloc = PMacAlloc, | |
2497 | .dma_free = PMacFree, | |
2498 | .irqinit = PMacIrqInit, | |
2499 | #ifdef MODULE | |
2500 | .irqcleanup = PMacIrqCleanup, | |
2501 | #endif /* MODULE */ | |
2502 | .init = PMacInit, | |
2503 | .silence = PMacSilence, | |
2504 | .setFormat = PMacSetFormat, | |
2505 | .setVolume = PMacSetVolume, | |
2506 | .play = PMacPlay, | |
2507 | .record = NULL, /* default to no record */ | |
2508 | .mixer_init = PMacMixerInit, | |
2509 | .mixer_ioctl = PMacMixerIoctl, | |
2510 | .write_sq_setup = PMacWriteSqSetup, | |
2511 | .read_sq_setup = PMacReadSqSetup, | |
2512 | .state_info = PMacStateInfo, | |
2513 | .abort_read = PMacAbortRead, | |
2514 | .min_dsp_speed = 7350, | |
2515 | .max_dsp_speed = 44100, | |
2516 | .version = ((DMASOUND_AWACS_REVISION<<8) + DMASOUND_AWACS_EDITION) | |
2517 | }; | |
2518 | ||
2519 | ||
2520 | /*** Config & Setup **********************************************************/ | |
2521 | ||
2522 | /* Check for pmac models that we care about in terms of special actions. | |
2523 | */ | |
2524 | ||
2525 | void __init | |
2526 | set_model(void) | |
2527 | { | |
2528 | /* portables/lap-tops */ | |
2529 | ||
2530 | if (machine_is_compatible("AAPL,3400/2400") || | |
2531 | machine_is_compatible("AAPL,3500")) { | |
2532 | is_pbook_3X00 = 1 ; | |
2533 | } | |
2534 | if (machine_is_compatible("PowerBook1,1") || /* lombard */ | |
2535 | machine_is_compatible("AAPL,PowerBook1998")){ /* wallstreet */ | |
2536 | is_pbook_g3 = 1 ; | |
2537 | return ; | |
2538 | } | |
2539 | } | |
2540 | ||
2541 | /* Get the OF node that tells us about the registers, interrupts etc. to use | |
2542 | for sound IO. | |
2543 | ||
2544 | On most machines the sound IO OF node is the 'davbus' node. On newer pmacs | |
2545 | with DACA (& Tumbler) the node to use is i2s-a. On much older machines i.e. | |
2546 | before 9500 there is no davbus node and we have to use the 'awacs' property. | |
2547 | ||
2548 | In the latter case we signal this by setting the codec value - so that the | |
2549 | code that looks for chip properties knows how to go about it. | |
2550 | */ | |
2551 | ||
2552 | static struct device_node* __init | |
2553 | get_snd_io_node(void) | |
2554 | { | |
2555 | struct device_node *np = NULL; | |
2556 | ||
2557 | /* set up awacs_node for early OF which doesn't have a full set of | |
2558 | * properties on davbus | |
2559 | */ | |
2560 | ||
2561 | awacs_node = find_devices("awacs"); | |
2562 | if (awacs_node) | |
2563 | awacs_revision = AWACS_AWACS; | |
2564 | ||
2565 | /* powermac models after 9500 (other than those which use DACA or | |
2566 | * Tumbler) have a node called "davbus". | |
2567 | */ | |
2568 | np = find_devices("davbus"); | |
2569 | /* | |
2570 | * if we didn't find a davbus device, try 'i2s-a' since | |
2571 | * this seems to be what iBooks (& Tumbler) have. | |
2572 | */ | |
2573 | if (np == NULL) | |
2574 | np = i2s_node = find_devices("i2s-a"); | |
2575 | ||
2576 | /* if we didn't find this - perhaps we are on an early model | |
2577 | * which _only_ has an 'awacs' node | |
2578 | */ | |
2579 | if (np == NULL && awacs_node) | |
2580 | np = awacs_node ; | |
2581 | ||
2582 | /* if we failed all these return null - this will cause the | |
2583 | * driver to give up... | |
2584 | */ | |
2585 | return np ; | |
2586 | } | |
2587 | ||
2588 | /* Get the OF node that contains the info about the sound chip, inputs s-rates | |
2589 | etc. | |
2590 | This node does not exist (or contains much reduced info) on earlier machines | |
2591 | we have to deduce the info other ways for these. | |
2592 | */ | |
2593 | ||
2594 | static struct device_node* __init | |
2595 | get_snd_info_node(struct device_node *io) | |
2596 | { | |
2597 | struct device_node *info; | |
2598 | ||
2599 | info = find_devices("sound"); | |
2600 | while (info && info->parent != io) | |
2601 | info = info->next; | |
2602 | return info; | |
2603 | } | |
2604 | ||
2605 | /* Find out what type of codec we have. | |
2606 | */ | |
2607 | ||
2608 | static int __init | |
2609 | get_codec_type(struct device_node *info) | |
2610 | { | |
2611 | /* already set if pre-davbus model and info will be NULL */ | |
2612 | int codec = awacs_revision ; | |
2613 | ||
2614 | if (info) { | |
2615 | /* must do awacs first to allow screamer to overide it */ | |
2616 | if (device_is_compatible(info, "awacs")) | |
2617 | codec = AWACS_AWACS ; | |
2618 | if (device_is_compatible(info, "screamer")) | |
2619 | codec = AWACS_SCREAMER; | |
2620 | if (device_is_compatible(info, "burgundy")) | |
2621 | codec = AWACS_BURGUNDY ; | |
2622 | if (device_is_compatible(info, "daca")) | |
2623 | codec = AWACS_DACA; | |
2624 | if (device_is_compatible(info, "tumbler")) | |
2625 | codec = AWACS_TUMBLER; | |
2626 | if (device_is_compatible(info, "snapper")) | |
2627 | codec = AWACS_SNAPPER; | |
2628 | } | |
2629 | return codec ; | |
2630 | } | |
2631 | ||
2632 | /* find out what type, if any, of expansion card we have | |
2633 | */ | |
2634 | static void __init | |
2635 | get_expansion_type(void) | |
2636 | { | |
2637 | if (find_devices("perch") != NULL) | |
2638 | has_perch = 1; | |
2639 | ||
2640 | if (find_devices("pb-ziva-pc") != NULL) | |
2641 | has_ziva = 1; | |
2642 | /* need to work out how we deal with iMac SRS module */ | |
2643 | } | |
2644 | ||
2645 | /* set up frame rates. | |
2646 | * I suspect that these routines don't quite go about it the right way: | |
2647 | * - where there is more than one rate - I think that the first property | |
2648 | * value is the number of rates. | |
2649 | * TODO: check some more device trees and modify accordingly | |
2650 | * Set dmasound.mach.max_dsp_rate on the basis of these routines. | |
2651 | */ | |
2652 | ||
2653 | static void __init | |
2654 | awacs_init_frame_rates(unsigned int *prop, unsigned int l) | |
2655 | { | |
2656 | int i ; | |
2657 | if (prop) { | |
2658 | for (i=0; i<8; i++) | |
2659 | awacs_freqs_ok[i] = 0 ; | |
2660 | for (l /= sizeof(int); l > 0; --l) { | |
2661 | unsigned int r = *prop++; | |
2662 | /* Apple 'Fixed' format */ | |
2663 | if (r >= 0x10000) | |
2664 | r >>= 16; | |
2665 | for (i = 0; i < 8; ++i) { | |
2666 | if (r == awacs_freqs[i]) { | |
2667 | awacs_freqs_ok[i] = 1; | |
2668 | break; | |
2669 | } | |
2670 | } | |
2671 | } | |
2672 | } | |
2673 | /* else we assume that all the rates are available */ | |
2674 | } | |
2675 | ||
2676 | static void __init | |
2677 | burgundy_init_frame_rates(unsigned int *prop, unsigned int l) | |
2678 | { | |
2679 | int temp[9] ; | |
2680 | int i = 0 ; | |
2681 | if (prop) { | |
2682 | for (l /= sizeof(int); l > 0; --l) { | |
2683 | unsigned int r = *prop++; | |
2684 | /* Apple 'Fixed' format */ | |
2685 | if (r >= 0x10000) | |
2686 | r >>= 16; | |
2687 | temp[i] = r ; | |
2688 | i++ ; if(i>=9) i=8; | |
2689 | } | |
2690 | } | |
2691 | #ifdef DEBUG_DMASOUND | |
2692 | if (i > 1){ | |
2693 | int j; | |
2694 | printk("dmasound_pmac: burgundy with multiple frame rates\n"); | |
2695 | for(j=0; j<i; j++) | |
2696 | printk("%d ", temp[j]) ; | |
2697 | printk("\n") ; | |
2698 | } | |
2699 | #endif | |
2700 | } | |
2701 | ||
2702 | static void __init | |
2703 | daca_init_frame_rates(unsigned int *prop, unsigned int l) | |
2704 | { | |
2705 | int temp[9] ; | |
2706 | int i = 0 ; | |
2707 | if (prop) { | |
2708 | for (l /= sizeof(int); l > 0; --l) { | |
2709 | unsigned int r = *prop++; | |
2710 | /* Apple 'Fixed' format */ | |
2711 | if (r >= 0x10000) | |
2712 | r >>= 16; | |
2713 | temp[i] = r ; | |
2714 | i++ ; if(i>=9) i=8; | |
2715 | ||
2716 | } | |
2717 | } | |
2718 | #ifdef DEBUG_DMASOUND | |
2719 | if (i > 1){ | |
2720 | int j; | |
2721 | printk("dmasound_pmac: DACA with multiple frame rates\n"); | |
2722 | for(j=0; j<i; j++) | |
2723 | printk("%d ", temp[j]) ; | |
2724 | printk("\n") ; | |
2725 | } | |
2726 | #endif | |
2727 | } | |
2728 | ||
2729 | static void __init | |
2730 | init_frame_rates(unsigned int *prop, unsigned int l) | |
2731 | { | |
2732 | switch (awacs_revision) { | |
2733 | case AWACS_TUMBLER: | |
2734 | case AWACS_SNAPPER: | |
2735 | tas_init_frame_rates(prop, l); | |
2736 | break ; | |
2737 | case AWACS_DACA: | |
2738 | daca_init_frame_rates(prop, l); | |
2739 | break ; | |
2740 | case AWACS_BURGUNDY: | |
2741 | burgundy_init_frame_rates(prop, l); | |
2742 | break ; | |
2743 | default: | |
2744 | awacs_init_frame_rates(prop, l); | |
2745 | break ; | |
2746 | } | |
2747 | } | |
2748 | ||
2749 | /* find things/machines that can't do mac-io byteswap | |
2750 | */ | |
2751 | ||
2752 | static void __init | |
2753 | set_hw_byteswap(struct device_node *io) | |
2754 | { | |
2755 | struct device_node *mio ; | |
2756 | unsigned int kl = 0 ; | |
2757 | ||
2758 | /* if seems that Keylargo can't byte-swap */ | |
2759 | ||
2760 | for (mio = io->parent; mio ; mio = mio->parent) { | |
2761 | if (strcmp(mio->name, "mac-io") == 0) { | |
2762 | if (device_is_compatible(mio, "Keylargo")) | |
2763 | kl = 1; | |
2764 | break; | |
2765 | } | |
2766 | } | |
2767 | hw_can_byteswap = !kl; | |
2768 | } | |
2769 | ||
2770 | /* Allocate the resources necessary for beep generation. This cannot be (quite) | |
2771 | done statically (yet) because we cannot do virt_to_bus() on static vars when | |
2772 | the code is loaded as a module. | |
2773 | ||
2774 | for the sake of saving the possibility that two allocations will incur the | |
2775 | overhead of two pull-ups in DBDMA_ALIGN() we allocate the 'emergency' dmdma | |
2776 | command here as well... even tho' it is not part of the beep process. | |
2777 | */ | |
2778 | ||
2779 | int32_t | |
2780 | __init setup_beep(void) | |
2781 | { | |
2782 | /* Initialize beep stuff */ | |
2783 | /* want one cmd buffer for beeps, and a second one for emergencies | |
2784 | - i.e. dbdma error conditions. | |
2785 | ask for three to allow for pull up in DBDMA_ALIGN(). | |
2786 | */ | |
2787 | beep_dbdma_cmd_space = | |
2788 | kmalloc((2 + 1) * sizeof(struct dbdma_cmd), GFP_KERNEL); | |
2789 | if(beep_dbdma_cmd_space == NULL) { | |
2790 | printk(KERN_ERR "dmasound_pmac: no beep dbdma cmd space\n") ; | |
2791 | return -ENOMEM ; | |
2792 | } | |
2793 | beep_dbdma_cmd = (volatile struct dbdma_cmd *) | |
2794 | DBDMA_ALIGN(beep_dbdma_cmd_space); | |
2795 | /* set up emergency dbdma cmd */ | |
2796 | emergency_dbdma_cmd = beep_dbdma_cmd+1 ; | |
4fa95ef6 | 2797 | beep_buf = kmalloc(BEEP_BUFLEN * 4, GFP_KERNEL); |
1da177e4 LT |
2798 | if (beep_buf == NULL) { |
2799 | printk(KERN_ERR "dmasound_pmac: no memory for beep buffer\n"); | |
09417379 | 2800 | kfree(beep_dbdma_cmd_space) ; |
1da177e4 LT |
2801 | return -ENOMEM ; |
2802 | } | |
2803 | return 0 ; | |
2804 | } | |
2805 | ||
7afada45 | 2806 | static struct input_dev *awacs_beep_dev; |
1da177e4 LT |
2807 | |
2808 | int __init dmasound_awacs_init(void) | |
2809 | { | |
2810 | struct device_node *io = NULL, *info = NULL; | |
2811 | int vol, res; | |
2812 | ||
e8222502 | 2813 | if (!machine_is(powermac)) |
1da177e4 LT |
2814 | return -ENODEV; |
2815 | ||
2816 | awacs_subframe = 0; | |
2817 | awacs_revision = 0; | |
2818 | hw_can_byteswap = 1 ; /* most can */ | |
2819 | ||
2820 | /* look for models we need to handle specially */ | |
2821 | set_model() ; | |
2822 | ||
2823 | /* find the OF node that tells us about the dbdma stuff | |
2824 | */ | |
2825 | io = get_snd_io_node(); | |
2826 | if (io == NULL) { | |
2827 | #ifdef DEBUG_DMASOUND | |
2828 | printk("dmasound_pmac: couldn't find sound io OF node\n"); | |
2829 | #endif | |
2830 | return -ENODEV ; | |
2831 | } | |
2832 | ||
2833 | /* find the OF node that tells us about the sound sub-system | |
2834 | * this doesn't exist on pre-davbus machines (earlier than 9500) | |
2835 | */ | |
2836 | if (awacs_revision != AWACS_AWACS) { /* set for pre-davbus */ | |
2837 | info = get_snd_info_node(io) ; | |
2838 | if (info == NULL){ | |
2839 | #ifdef DEBUG_DMASOUND | |
2840 | printk("dmasound_pmac: couldn't find 'sound' OF node\n"); | |
2841 | #endif | |
2842 | return -ENODEV ; | |
2843 | } | |
2844 | } | |
2845 | ||
2846 | awacs_revision = get_codec_type(info) ; | |
2847 | if (awacs_revision == 0) { | |
2848 | #ifdef DEBUG_DMASOUND | |
2849 | printk("dmasound_pmac: couldn't find a Codec we can handle\n"); | |
2850 | #endif | |
2851 | return -ENODEV ; /* we don't know this type of h/w */ | |
2852 | } | |
2853 | ||
2854 | /* set up perch, ziva, SRS or whatever else we have as sound | |
2855 | * expansion. | |
2856 | */ | |
2857 | get_expansion_type(); | |
2858 | ||
2859 | /* we've now got enough information to make up the audio topology. | |
2860 | * we will map the sound part of mac-io now so that we can probe for | |
2861 | * other info if necessary (early AWACS we want to read chip ids) | |
2862 | */ | |
2863 | ||
0ebfff14 | 2864 | if (of_get_address(io, 2, NULL, NULL) == NULL) { |
1da177e4 LT |
2865 | /* OK - maybe we need to use the 'awacs' node (on earlier |
2866 | * machines). | |
cc5d0189 | 2867 | */ |
1da177e4 LT |
2868 | if (awacs_node) { |
2869 | io = awacs_node ; | |
0ebfff14 | 2870 | if (of_get_address(io, 2, NULL, NULL) == NULL) { |
cc5d0189 BH |
2871 | printk("dmasound_pmac: can't use %s\n", |
2872 | io->full_name); | |
1da177e4 LT |
2873 | return -ENODEV; |
2874 | } | |
cc5d0189 BH |
2875 | } else |
2876 | printk("dmasound_pmac: can't use %s\n", io->full_name); | |
1da177e4 LT |
2877 | } |
2878 | ||
cc5d0189 BH |
2879 | if (of_address_to_resource(io, 0, &awacs_rsrc[0]) || |
2880 | request_mem_region(awacs_rsrc[0].start, | |
2881 | awacs_rsrc[0].end - awacs_rsrc[0].start + 1, | |
2882 | " (IO)") == NULL) { | |
1da177e4 LT |
2883 | printk(KERN_ERR "dmasound: can't request IO resource !\n"); |
2884 | return -ENODEV; | |
2885 | } | |
cc5d0189 BH |
2886 | if (of_address_to_resource(io, 1, &awacs_rsrc[1]) || |
2887 | request_mem_region(awacs_rsrc[1].start, | |
2888 | awacs_rsrc[1].end - awacs_rsrc[1].start + 1, | |
2889 | " (tx dma)") == NULL) { | |
2890 | release_mem_region(awacs_rsrc[0].start, | |
2891 | awacs_rsrc[0].end - awacs_rsrc[0].start + 1); | |
2892 | printk(KERN_ERR "dmasound: can't request Tx DMA resource !\n"); | |
1da177e4 LT |
2893 | return -ENODEV; |
2894 | } | |
cc5d0189 BH |
2895 | if (of_address_to_resource(io, 2, &awacs_rsrc[2]) || |
2896 | request_mem_region(awacs_rsrc[2].start, | |
2897 | awacs_rsrc[2].end - awacs_rsrc[2].start + 1, | |
2898 | " (rx dma)") == NULL) { | |
2899 | release_mem_region(awacs_rsrc[0].start, | |
2900 | awacs_rsrc[0].end - awacs_rsrc[0].start + 1); | |
2901 | release_mem_region(awacs_rsrc[1].start, | |
2902 | awacs_rsrc[1].end - awacs_rsrc[1].start + 1); | |
2903 | printk(KERN_ERR "dmasound: can't request Rx DMA resource !\n"); | |
1da177e4 LT |
2904 | return -ENODEV; |
2905 | } | |
2906 | ||
7afada45 IW |
2907 | awacs_beep_dev = input_allocate_device(); |
2908 | if (!awacs_beep_dev) { | |
cc5d0189 BH |
2909 | release_mem_region(awacs_rsrc[0].start, |
2910 | awacs_rsrc[0].end - awacs_rsrc[0].start + 1); | |
2911 | release_mem_region(awacs_rsrc[1].start, | |
2912 | awacs_rsrc[1].end - awacs_rsrc[1].start + 1); | |
2913 | release_mem_region(awacs_rsrc[2].start, | |
2914 | awacs_rsrc[2].end - awacs_rsrc[2].start + 1); | |
7afada45 IW |
2915 | printk(KERN_ERR "dmasound: can't allocate input device !\n"); |
2916 | return -ENOMEM; | |
2917 | } | |
2918 | ||
2919 | awacs_beep_dev->name = "dmasound beeper"; | |
2920 | awacs_beep_dev->phys = "macio/input0"; | |
2921 | awacs_beep_dev->id.bustype = BUS_HOST; | |
2922 | awacs_beep_dev->event = awacs_beep_event; | |
2923 | awacs_beep_dev->sndbit[0] = BIT(SND_BELL) | BIT(SND_TONE); | |
2924 | awacs_beep_dev->evbit[0] = BIT(EV_SND); | |
2925 | ||
1da177e4 LT |
2926 | /* all OF versions I've seen use this value */ |
2927 | if (i2s_node) | |
cc5d0189 | 2928 | i2s = ioremap(awacs_rsrc[0].start, 0x1000); |
1da177e4 | 2929 | else |
cc5d0189 BH |
2930 | awacs = ioremap(awacs_rsrc[0].start, 0x1000); |
2931 | awacs_txdma = ioremap(awacs_rsrc[1].start, 0x100); | |
2932 | awacs_rxdma = ioremap(awacs_rsrc[2].start, 0x100); | |
1da177e4 LT |
2933 | |
2934 | /* first of all make sure that the chip is powered up....*/ | |
2935 | pmac_call_feature(PMAC_FTR_SOUND_CHIP_ENABLE, io, 0, 1); | |
2936 | if (awacs_revision == AWACS_SCREAMER && awacs) | |
2937 | awacs_recalibrate(); | |
2938 | ||
0ebfff14 BH |
2939 | awacs_irq = irq_of_parse_and_map(io, 0); |
2940 | awacs_tx_irq = irq_of_parse_and_map(io, 1); | |
2941 | awacs_rx_irq = irq_of_parse_and_map(io, 2); | |
1da177e4 LT |
2942 | |
2943 | /* Hack for legacy crap that will be killed someday */ | |
2944 | awacs_node = io; | |
2945 | ||
2946 | /* if we have an awacs or screamer - probe the chip to make | |
2947 | * sure we have the right revision. | |
2948 | */ | |
2949 | ||
2950 | if (awacs_revision <= AWACS_SCREAMER){ | |
2951 | uint32_t temp, rev, mfg ; | |
2952 | /* find out the awacs revision from the chip */ | |
2953 | temp = in_le32(&awacs->codec_stat); | |
2954 | rev = (temp >> 12) & 0xf; | |
2955 | mfg = (temp >> 8) & 0xf; | |
2956 | #ifdef DEBUG_DMASOUND | |
2957 | printk("dmasound_pmac: Awacs/Screamer Codec Mfct: %d Rev %d\n", mfg, rev); | |
2958 | #endif | |
2959 | if (rev >= AWACS_SCREAMER) | |
2960 | awacs_revision = AWACS_SCREAMER ; | |
2961 | else | |
2962 | awacs_revision = rev ; | |
2963 | } | |
2964 | ||
2965 | dmasound.mach = machPMac; | |
2966 | ||
2967 | /* find out other bits & pieces from OF, these may be present | |
2968 | only on some models ... so be careful. | |
2969 | */ | |
2970 | ||
2971 | /* in the absence of a frame rates property we will use the defaults | |
2972 | */ | |
2973 | ||
2974 | if (info) { | |
2975 | unsigned int *prop, l; | |
2976 | ||
2977 | sound_device_id = 0; | |
2978 | /* device ID appears post g3 b&w */ | |
2979 | prop = (unsigned int *)get_property(info, "device-id", NULL); | |
2980 | if (prop != 0) | |
2981 | sound_device_id = *prop; | |
2982 | ||
2983 | /* look for a property saying what sample rates | |
2984 | are available */ | |
2985 | ||
2986 | prop = (unsigned int *)get_property(info, "sample-rates", &l); | |
2987 | if (prop == 0) | |
2988 | prop = (unsigned int *) get_property | |
2989 | (info, "output-frame-rates", &l); | |
2990 | ||
2991 | /* if it's there use it to set up frame rates */ | |
2992 | init_frame_rates(prop, l) ; | |
2993 | } | |
2994 | ||
2995 | if (awacs) | |
2996 | out_le32(&awacs->control, 0x11); /* set everything quiesent */ | |
2997 | ||
2998 | set_hw_byteswap(io) ; /* figure out if the h/w can do it */ | |
2999 | ||
3000 | #ifdef CONFIG_NVRAM | |
3001 | /* get default volume from nvram */ | |
3002 | vol = ((pmac_xpram_read( 8 ) & 7 ) << 1 ); | |
3003 | #else | |
3004 | vol = 0; | |
3005 | #endif | |
3006 | ||
3007 | /* set up tracking values */ | |
3008 | spk_vol = vol * 100 ; | |
3009 | spk_vol /= 7 ; /* get set value to a percentage */ | |
3010 | spk_vol |= (spk_vol << 8) ; /* equal left & right */ | |
3011 | line_vol = passthru_vol = spk_vol ; | |
3012 | ||
3013 | /* fill regs that are shared between AWACS & Burgundy */ | |
3014 | ||
3015 | awacs_reg[2] = vol + (vol << 6); | |
3016 | awacs_reg[4] = vol + (vol << 6); | |
3017 | awacs_reg[5] = vol + (vol << 6); /* screamer has loopthru vol control */ | |
3018 | awacs_reg[6] = 0; /* maybe should be vol << 3 for PCMCIA speaker */ | |
3019 | awacs_reg[7] = 0; | |
3020 | ||
3021 | awacs_reg[0] = MASK_MUX_CD; | |
3022 | awacs_reg[1] = MASK_LOOPTHRU; | |
3023 | ||
3024 | /* FIXME: Only machines with external SRS module need MASK_PAROUT */ | |
3025 | if (has_perch || sound_device_id == 0x5 | |
3026 | || /*sound_device_id == 0x8 ||*/ sound_device_id == 0xb) | |
3027 | awacs_reg[1] |= MASK_PAROUT0 | MASK_PAROUT1; | |
3028 | ||
3029 | switch (awacs_revision) { | |
3030 | case AWACS_TUMBLER: | |
3031 | tas_register_driver(&tas3001c_hooks); | |
3032 | tas_init(I2C_DRIVERID_TAS3001C, I2C_DRIVERNAME_TAS3001C); | |
3033 | tas_dmasound_init(); | |
3034 | tas_post_init(); | |
3035 | break ; | |
3036 | case AWACS_SNAPPER: | |
3037 | tas_register_driver(&tas3004_hooks); | |
3038 | tas_init(I2C_DRIVERID_TAS3004,I2C_DRIVERNAME_TAS3004); | |
3039 | tas_dmasound_init(); | |
3040 | tas_post_init(); | |
3041 | break; | |
3042 | case AWACS_DACA: | |
3043 | daca_init(); | |
3044 | break; | |
3045 | case AWACS_BURGUNDY: | |
3046 | awacs_burgundy_init(); | |
3047 | break ; | |
3048 | case AWACS_SCREAMER: | |
3049 | case AWACS_AWACS: | |
3050 | default: | |
3051 | load_awacs(); | |
3052 | break ; | |
3053 | } | |
3054 | ||
3055 | /* enable/set-up external modules - when we know how */ | |
3056 | ||
3057 | if (has_perch) | |
3058 | awacs_enable_amp(100 * 0x101); | |
3059 | ||
3060 | /* Reset dbdma channels */ | |
3061 | out_le32(&awacs_txdma->control, (RUN|PAUSE|FLUSH|WAKE|DEAD) << 16); | |
3062 | while (in_le32(&awacs_txdma->status) & RUN) | |
3063 | udelay(1); | |
3064 | out_le32(&awacs_rxdma->control, (RUN|PAUSE|FLUSH|WAKE|DEAD) << 16); | |
3065 | while (in_le32(&awacs_rxdma->status) & RUN) | |
3066 | udelay(1); | |
3067 | ||
3068 | /* Initialize beep stuff */ | |
3069 | if ((res=setup_beep())) | |
3070 | return res ; | |
3071 | ||
8c870933 | 3072 | #ifdef CONFIG_PM |
1da177e4 | 3073 | pmu_register_sleep_notifier(&awacs_sleep_notifier); |
8c870933 | 3074 | #endif /* CONFIG_PM */ |
1da177e4 LT |
3075 | |
3076 | /* Powerbooks have odd ways of enabling inputs such as | |
3077 | an expansion-bay CD or sound from an internal modem | |
3078 | or a PC-card modem. */ | |
3079 | if (is_pbook_3X00) { | |
3080 | /* | |
3081 | * Enable CD and PC-card sound inputs. | |
3082 | * This is done by reading from address | |
3083 | * f301a000, + 0x10 to enable the expansion-bay | |
3084 | * CD sound input, + 0x80 to enable the PC-card | |
3085 | * sound input. The 0x100 enables the SCSI bus | |
3086 | * terminator power. | |
3087 | */ | |
3088 | latch_base = ioremap (0xf301a000, 0x1000); | |
3089 | in_8(latch_base + 0x190); | |
3090 | ||
3091 | } else if (is_pbook_g3) { | |
3092 | struct device_node* mio; | |
3093 | macio_base = NULL; | |
3094 | for (mio = io->parent; mio; mio = mio->parent) { | |
cc5d0189 BH |
3095 | if (strcmp(mio->name, "mac-io") == 0) { |
3096 | struct resource r; | |
3097 | if (of_address_to_resource(mio, 0, &r) == 0) | |
3098 | macio_base = ioremap(r.start, 0x40); | |
1da177e4 LT |
3099 | break; |
3100 | } | |
3101 | } | |
3102 | /* | |
3103 | * Enable CD sound input. | |
3104 | * The relevant bits for writing to this byte are 0x8f. | |
3105 | * I haven't found out what the 0x80 bit does. | |
3106 | * For the 0xf bits, writing 3 or 7 enables the CD | |
3107 | * input, any other value disables it. Values | |
3108 | * 1, 3, 5, 7 enable the microphone. Values 0, 2, | |
3109 | * 4, 6, 8 - f enable the input from the modem. | |
3110 | * -- paulus. | |
3111 | */ | |
3112 | if (macio_base) | |
3113 | out_8(macio_base + 0x37, 3); | |
3114 | } | |
3115 | ||
3116 | if (hw_can_byteswap) | |
3117 | dmasound.mach.hardware_afmts = (AFMT_S16_BE | AFMT_S16_LE) ; | |
3118 | else | |
3119 | dmasound.mach.hardware_afmts = AFMT_S16_BE ; | |
3120 | ||
3121 | /* shut out chips that do output only. | |
3122 | * may need to extend this to machines which have no inputs - even tho' | |
3123 | * they use screamer - IIRC one of the powerbooks is like this. | |
3124 | */ | |
3125 | ||
3126 | if (awacs_revision != AWACS_DACA) { | |
3127 | dmasound.mach.capabilities = DSP_CAP_DUPLEX ; | |
3128 | dmasound.mach.record = PMacRecord ; | |
3129 | } | |
3130 | ||
3131 | dmasound.mach.default_hard = def_hard ; | |
3132 | dmasound.mach.default_soft = def_soft ; | |
3133 | ||
3134 | switch (awacs_revision) { | |
3135 | case AWACS_BURGUNDY: | |
3136 | sprintf(awacs_name, "PowerMac Burgundy ") ; | |
3137 | break ; | |
3138 | case AWACS_DACA: | |
3139 | sprintf(awacs_name, "PowerMac DACA ") ; | |
3140 | break ; | |
3141 | case AWACS_TUMBLER: | |
3142 | sprintf(awacs_name, "PowerMac Tumbler ") ; | |
3143 | break ; | |
3144 | case AWACS_SNAPPER: | |
3145 | sprintf(awacs_name, "PowerMac Snapper ") ; | |
3146 | break ; | |
3147 | case AWACS_SCREAMER: | |
3148 | sprintf(awacs_name, "PowerMac Screamer ") ; | |
3149 | break ; | |
3150 | case AWACS_AWACS: | |
3151 | default: | |
3152 | sprintf(awacs_name, "PowerMac AWACS rev %d ", awacs_revision) ; | |
3153 | break ; | |
3154 | } | |
3155 | ||
3156 | /* | |
3157 | * XXX: we should handle errors here, but that would mean | |
3158 | * rewriting the whole init code. later.. | |
3159 | */ | |
7afada45 | 3160 | input_register_device(awacs_beep_dev); |
1da177e4 LT |
3161 | |
3162 | return dmasound_init(); | |
3163 | } | |
3164 | ||
3165 | static void __exit dmasound_awacs_cleanup(void) | |
3166 | { | |
7afada45 | 3167 | input_unregister_device(awacs_beep_dev); |
1da177e4 LT |
3168 | |
3169 | switch (awacs_revision) { | |
3170 | case AWACS_TUMBLER: | |
3171 | case AWACS_SNAPPER: | |
3172 | tas_dmasound_cleanup(); | |
3173 | tas_cleanup(); | |
3174 | break ; | |
3175 | case AWACS_DACA: | |
3176 | daca_cleanup(); | |
3177 | break; | |
3178 | } | |
3179 | dmasound_deinit(); | |
3180 | ||
3181 | } | |
3182 | ||
3183 | MODULE_DESCRIPTION("PowerMac built-in audio driver."); | |
3184 | MODULE_LICENSE("GPL"); | |
3185 | ||
3186 | module_init(dmasound_awacs_init); | |
3187 | module_exit(dmasound_awacs_cleanup); |