[ALSA] ac97_bus - revert last change and do it only in the ALSA tree
[deliverable/linux.git] / sound / oss / gus_card.c
CommitLineData
1da177e4
LT
1/*
2 * sound/gus_card.c
3 *
4 * Detection routine for the Gravis Ultrasound.
5 *
6 * Copyright (C) by Hannu Savolainen 1993-1997
7 *
8 *
9 * Frank van de Pol : Fixed GUS MAX interrupt handling, enabled simultanious
10 * usage of CS4231A codec, GUS wave and MIDI for GUS MAX.
11 * Christoph Hellwig: Adapted to module_init/module_exit, simple cleanups.
12 *
13 * Status:
14 * Tested...
15 */
16
17
18#include <linux/config.h>
19#include <linux/init.h>
20#include <linux/interrupt.h>
21#include <linux/module.h>
22
23#include "sound_config.h"
24
25#include "gus.h"
26#include "gus_hw.h"
27
28irqreturn_t gusintr(int irq, void *dev_id, struct pt_regs *dummy);
29
30int gus_base = 0, gus_irq = 0, gus_dma = 0;
31int gus_no_wave_dma = 0;
32extern int gus_wave_volume;
33extern int gus_pcm_volume;
34extern int have_gus_max;
35int gus_pnp_flag = 0;
36#ifdef CONFIG_SOUND_GUS16
37static int db16; /* Has a Gus16 AD1848 on it */
38#endif
39
40static void __init attach_gus(struct address_info *hw_config)
41{
42 gus_wave_init(hw_config);
43
44 if (sound_alloc_dma(hw_config->dma, "GUS"))
45 printk(KERN_ERR "gus_card.c: Can't allocate DMA channel %d\n", hw_config->dma);
46 if (hw_config->dma2 != -1 && hw_config->dma2 != hw_config->dma)
47 if (sound_alloc_dma(hw_config->dma2, "GUS(2)"))
48 printk(KERN_ERR "gus_card.c: Can't allocate DMA channel %d\n", hw_config->dma2);
49 gus_midi_init(hw_config);
50 if(request_irq(hw_config->irq, gusintr, 0, "Gravis Ultrasound", hw_config)<0)
51 printk(KERN_ERR "gus_card.c: Unable to allocate IRQ %d\n", hw_config->irq);
52
53 return;
54}
55
56static int __init probe_gus(struct address_info *hw_config)
57{
58 int irq;
59 int io_addr;
60
61 if (hw_config->card_subtype == 1)
62 gus_pnp_flag = 1;
63
64 irq = hw_config->irq;
65
66 if (hw_config->card_subtype == 0) /* GUS/MAX/ACE */
67 if (irq != 3 && irq != 5 && irq != 7 && irq != 9 &&
68 irq != 11 && irq != 12 && irq != 15)
69 {
70 printk(KERN_ERR "GUS: Unsupported IRQ %d\n", irq);
71 return 0;
72 }
73 if (gus_wave_detect(hw_config->io_base))
74 return 1;
75
76#ifndef EXCLUDE_GUS_IODETECT
77
78 /*
79 * Look at the possible base addresses (0x2X0, X=1, 2, 3, 4, 5, 6)
80 */
81
82 for (io_addr = 0x210; io_addr <= 0x260; io_addr += 0x10) {
83 if (io_addr == hw_config->io_base) /* Already tested */
84 continue;
85 if (gus_wave_detect(io_addr)) {
86 hw_config->io_base = io_addr;
87 return 1;
88 }
89 }
90#endif
91
92 printk("NO GUS card found !\n");
93 return 0;
94}
95
96static void __exit unload_gus(struct address_info *hw_config)
97{
98 DDB(printk("unload_gus(%x)\n", hw_config->io_base));
99
100 gus_wave_unload(hw_config);
101
102 release_region(hw_config->io_base, 16);
103 release_region(hw_config->io_base + 0x100, 12); /* 0x10c-> is MAX */
104 free_irq(hw_config->irq, hw_config);
105
106 sound_free_dma(hw_config->dma);
107
108 if (hw_config->dma2 != -1 && hw_config->dma2 != hw_config->dma)
109 sound_free_dma(hw_config->dma2);
110}
111
112irqreturn_t gusintr(int irq, void *dev_id, struct pt_regs *dummy)
113{
114 unsigned char src;
115 extern int gus_timer_enabled;
116 int handled = 0;
117
118#ifdef CONFIG_SOUND_GUSMAX
119 if (have_gus_max) {
120 struct address_info *hw_config = dev_id;
121 adintr(irq, (void *)hw_config->slots[1], NULL);
122 }
123#endif
124#ifdef CONFIG_SOUND_GUS16
125 if (db16) {
126 struct address_info *hw_config = dev_id;
127 adintr(irq, (void *)hw_config->slots[3], NULL);
128 }
129#endif
130
131 while (1)
132 {
133 if (!(src = inb(u_IrqStatus)))
134 break;
135 handled = 1;
136 if (src & DMA_TC_IRQ)
137 {
138 guswave_dma_irq();
139 }
140 if (src & (MIDI_TX_IRQ | MIDI_RX_IRQ))
141 {
142 gus_midi_interrupt(0);
143 }
144 if (src & (GF1_TIMER1_IRQ | GF1_TIMER2_IRQ))
145 {
146 if (gus_timer_enabled)
147 sound_timer_interrupt();
148 gus_write8(0x45, 0); /* Ack IRQ */
149 gus_timer_command(4, 0x80); /* Reset IRQ flags */
150 }
151 if (src & (WAVETABLE_IRQ | ENVELOPE_IRQ))
152 gus_voice_irq();
153 }
154 return IRQ_RETVAL(handled);
155}
156
157/*
158 * Some extra code for the 16 bit sampling option
159 */
160
161#ifdef CONFIG_SOUND_GUS16
162
163static int __init init_gus_db16(struct address_info *hw_config)
164{
165 struct resource *ports;
166
167 ports = request_region(hw_config->io_base, 4, "ad1848");
168 if (!ports)
169 return 0;
170
171 if (!ad1848_detect(ports, NULL, hw_config->osp)) {
172 release_region(hw_config->io_base, 4);
173 return 0;
174 }
175
176 gus_pcm_volume = 100;
177 gus_wave_volume = 90;
178
179 hw_config->slots[3] = ad1848_init("GUS 16 bit sampling", ports,
180 hw_config->irq,
181 hw_config->dma,
182 hw_config->dma, 0,
183 hw_config->osp,
184 THIS_MODULE);
185 return 1;
186}
187
188static void __exit unload_gus_db16(struct address_info *hw_config)
189{
190
191 ad1848_unload(hw_config->io_base,
192 hw_config->irq,
193 hw_config->dma,
194 hw_config->dma, 0);
195 sound_unload_audiodev(hw_config->slots[3]);
196}
197#endif
198
199#ifdef CONFIG_SOUND_GUS16
200static int gus16;
201#endif
202#ifdef CONFIG_SOUND_GUSMAX
203static int no_wave_dma; /* Set if no dma is to be used for the
204 wave table (GF1 chip) */
205#endif
206
207
208/*
209 * Note DMA2 of -1 has the right meaning in the GUS driver as well
210 * as here.
211 */
212
213static struct address_info cfg;
214
215static int __initdata io = -1;
216static int __initdata irq = -1;
217static int __initdata dma = -1;
218static int __initdata dma16 = -1; /* Set this for modules that need it */
219static int __initdata type = 0; /* 1 for PnP */
220
221module_param(io, int, 0);
222module_param(irq, int, 0);
223module_param(dma, int, 0);
224module_param(dma16, int, 0);
225module_param(type, int, 0);
226#ifdef CONFIG_SOUND_GUSMAX
227module_param(no_wave_dma, int, 0);
228#endif
229#ifdef CONFIG_SOUND_GUS16
230module_param(db16, int, 0);
231module_param(gus16, int, 0);
232#endif
233MODULE_LICENSE("GPL");
234
235static int __init init_gus(void)
236{
237 printk(KERN_INFO "Gravis Ultrasound audio driver Copyright (C) by Hannu Savolainen 1993-1996\n");
238
239 cfg.io_base = io;
240 cfg.irq = irq;
241 cfg.dma = dma;
242 cfg.dma2 = dma16;
243 cfg.card_subtype = type;
244#ifdef CONFIG_SOUND_GUSMAX
245 gus_no_wave_dma = no_wave_dma;
246#endif
247
248 if (cfg.io_base == -1 || cfg.dma == -1 || cfg.irq == -1) {
249 printk(KERN_ERR "I/O, IRQ, and DMA are mandatory\n");
250 return -EINVAL;
251 }
252
253#ifdef CONFIG_SOUND_GUS16
254 if (gus16 && init_gus_db16(&cfg))
255 db16 = 1;
256#endif
257 if (!probe_gus(&cfg))
258 return -ENODEV;
259 attach_gus(&cfg);
260
261 return 0;
262}
263
264static void __exit cleanup_gus(void)
265{
266#ifdef CONFIG_SOUND_GUS16
267 if (db16)
268 unload_gus_db16(&cfg);
269#endif
270 unload_gus(&cfg);
271}
272
273module_init(init_gus);
274module_exit(cleanup_gus);
275
276#ifndef MODULE
277static int __init setup_gus(char *str)
278{
279 /* io, irq, dma, dma2 */
280 int ints[5];
281
282 str = get_options(str, ARRAY_SIZE(ints), ints);
283
284 io = ints[1];
285 irq = ints[2];
286 dma = ints[3];
287 dma16 = ints[4];
288
289 return 1;
290}
291
292__setup("gus=", setup_gus);
293#endif
This page took 0.0547 seconds and 5 git commands to generate.