Commit | Line | Data |
---|---|---|
f1c0a02f MB |
1 | /* |
2 | * wm8903.c -- WM8903 ALSA SoC Audio driver | |
3 | * | |
4 | * Copyright 2008 Wolfson Microelectronics | |
7cfe5617 | 5 | * Copyright 2011 NVIDIA, Inc. |
f1c0a02f MB |
6 | * |
7 | * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> | |
8 | * | |
9 | * This program is free software; you can redistribute it and/or modify | |
10 | * it under the terms of the GNU General Public License version 2 as | |
11 | * published by the Free Software Foundation. | |
12 | * | |
13 | * TODO: | |
14 | * - TDM mode configuration. | |
f1c0a02f | 15 | * - Digital microphone support. |
f1c0a02f MB |
16 | */ |
17 | ||
18 | #include <linux/module.h> | |
19 | #include <linux/moduleparam.h> | |
20 | #include <linux/init.h> | |
8abd16a6 | 21 | #include <linux/completion.h> |
f1c0a02f | 22 | #include <linux/delay.h> |
7cfe5617 | 23 | #include <linux/gpio.h> |
f1c0a02f MB |
24 | #include <linux/pm.h> |
25 | #include <linux/i2c.h> | |
ee244ce4 | 26 | #include <linux/regmap.h> |
5a0e3ad6 | 27 | #include <linux/slab.h> |
9d35f3e1 | 28 | #include <linux/irq.h> |
f1c0a02f | 29 | #include <sound/core.h> |
7245387e | 30 | #include <sound/jack.h> |
f1c0a02f MB |
31 | #include <sound/pcm.h> |
32 | #include <sound/pcm_params.h> | |
33 | #include <sound/tlv.h> | |
34 | #include <sound/soc.h> | |
f1c0a02f | 35 | #include <sound/initval.h> |
8abd16a6 | 36 | #include <sound/wm8903.h> |
2bbb5d66 | 37 | #include <trace/events/asoc.h> |
f1c0a02f MB |
38 | |
39 | #include "wm8903.h" | |
40 | ||
f1c0a02f | 41 | /* Register defaults at reset */ |
ee244ce4 MB |
42 | static const struct reg_default wm8903_reg_defaults[] = { |
43 | { 4, 0x0018 }, /* R4 - Bias Control 0 */ | |
44 | { 5, 0x0000 }, /* R5 - VMID Control 0 */ | |
45 | { 6, 0x0000 }, /* R6 - Mic Bias Control 0 */ | |
46 | { 8, 0x0001 }, /* R8 - Analogue DAC 0 */ | |
47 | { 10, 0x0001 }, /* R10 - Analogue ADC 0 */ | |
48 | { 12, 0x0000 }, /* R12 - Power Management 0 */ | |
49 | { 13, 0x0000 }, /* R13 - Power Management 1 */ | |
50 | { 14, 0x0000 }, /* R14 - Power Management 2 */ | |
51 | { 15, 0x0000 }, /* R15 - Power Management 3 */ | |
52 | { 16, 0x0000 }, /* R16 - Power Management 4 */ | |
53 | { 17, 0x0000 }, /* R17 - Power Management 5 */ | |
54 | { 18, 0x0000 }, /* R18 - Power Management 6 */ | |
55 | { 20, 0x0400 }, /* R20 - Clock Rates 0 */ | |
56 | { 21, 0x0D07 }, /* R21 - Clock Rates 1 */ | |
57 | { 22, 0x0000 }, /* R22 - Clock Rates 2 */ | |
58 | { 24, 0x0050 }, /* R24 - Audio Interface 0 */ | |
59 | { 25, 0x0242 }, /* R25 - Audio Interface 1 */ | |
60 | { 26, 0x0008 }, /* R26 - Audio Interface 2 */ | |
61 | { 27, 0x0022 }, /* R27 - Audio Interface 3 */ | |
62 | { 30, 0x00C0 }, /* R30 - DAC Digital Volume Left */ | |
63 | { 31, 0x00C0 }, /* R31 - DAC Digital Volume Right */ | |
64 | { 32, 0x0000 }, /* R32 - DAC Digital 0 */ | |
65 | { 33, 0x0000 }, /* R33 - DAC Digital 1 */ | |
66 | { 36, 0x00C0 }, /* R36 - ADC Digital Volume Left */ | |
67 | { 37, 0x00C0 }, /* R37 - ADC Digital Volume Right */ | |
68 | { 38, 0x0000 }, /* R38 - ADC Digital 0 */ | |
69 | { 39, 0x0073 }, /* R39 - Digital Microphone 0 */ | |
70 | { 40, 0x09BF }, /* R40 - DRC 0 */ | |
71 | { 41, 0x3241 }, /* R41 - DRC 1 */ | |
72 | { 42, 0x0020 }, /* R42 - DRC 2 */ | |
73 | { 43, 0x0000 }, /* R43 - DRC 3 */ | |
74 | { 44, 0x0085 }, /* R44 - Analogue Left Input 0 */ | |
75 | { 45, 0x0085 }, /* R45 - Analogue Right Input 0 */ | |
76 | { 46, 0x0044 }, /* R46 - Analogue Left Input 1 */ | |
77 | { 47, 0x0044 }, /* R47 - Analogue Right Input 1 */ | |
78 | { 50, 0x0008 }, /* R50 - Analogue Left Mix 0 */ | |
79 | { 51, 0x0004 }, /* R51 - Analogue Right Mix 0 */ | |
80 | { 52, 0x0000 }, /* R52 - Analogue Spk Mix Left 0 */ | |
81 | { 53, 0x0000 }, /* R53 - Analogue Spk Mix Left 1 */ | |
82 | { 54, 0x0000 }, /* R54 - Analogue Spk Mix Right 0 */ | |
83 | { 55, 0x0000 }, /* R55 - Analogue Spk Mix Right 1 */ | |
84 | { 57, 0x002D }, /* R57 - Analogue OUT1 Left */ | |
85 | { 58, 0x002D }, /* R58 - Analogue OUT1 Right */ | |
86 | { 59, 0x0039 }, /* R59 - Analogue OUT2 Left */ | |
87 | { 60, 0x0039 }, /* R60 - Analogue OUT2 Right */ | |
88 | { 62, 0x0139 }, /* R62 - Analogue OUT3 Left */ | |
89 | { 63, 0x0139 }, /* R63 - Analogue OUT3 Right */ | |
90 | { 64, 0x0000 }, /* R65 - Analogue SPK Output Control 0 */ | |
91 | { 67, 0x0010 }, /* R67 - DC Servo 0 */ | |
92 | { 69, 0x00A4 }, /* R69 - DC Servo 2 */ | |
93 | { 90, 0x0000 }, /* R90 - Analogue HP 0 */ | |
94 | { 94, 0x0000 }, /* R94 - Analogue Lineout 0 */ | |
95 | { 98, 0x0000 }, /* R98 - Charge Pump 0 */ | |
96 | { 104, 0x0000 }, /* R104 - Class W 0 */ | |
97 | { 108, 0x0000 }, /* R108 - Write Sequencer 0 */ | |
98 | { 109, 0x0000 }, /* R109 - Write Sequencer 1 */ | |
99 | { 110, 0x0000 }, /* R110 - Write Sequencer 2 */ | |
100 | { 111, 0x0000 }, /* R111 - Write Sequencer 3 */ | |
101 | { 112, 0x0000 }, /* R112 - Write Sequencer 4 */ | |
102 | { 114, 0x0000 }, /* R114 - Control Interface */ | |
103 | { 116, 0x00A8 }, /* R116 - GPIO Control 1 */ | |
104 | { 117, 0x00A8 }, /* R117 - GPIO Control 2 */ | |
105 | { 118, 0x00A8 }, /* R118 - GPIO Control 3 */ | |
106 | { 119, 0x0220 }, /* R119 - GPIO Control 4 */ | |
107 | { 120, 0x01A0 }, /* R120 - GPIO Control 5 */ | |
108 | { 122, 0xFFFF }, /* R122 - Interrupt Status 1 Mask */ | |
109 | { 123, 0x0000 }, /* R123 - Interrupt Polarity 1 */ | |
110 | { 126, 0x0000 }, /* R126 - Interrupt Control */ | |
111 | { 129, 0x0000 }, /* R129 - Control Interface Test 1 */ | |
112 | { 149, 0x6810 }, /* R149 - Charge Pump Test 1 */ | |
113 | { 164, 0x0028 }, /* R164 - Clock Rate Test 4 */ | |
114 | { 172, 0x0000 }, /* R172 - Analogue Output Bias 0 */ | |
f1c0a02f MB |
115 | }; |
116 | ||
d58d5d55 | 117 | struct wm8903_priv { |
c0eb27cf | 118 | struct wm8903_platform_data *pdata; |
7cfe5617 | 119 | struct snd_soc_codec *codec; |
ee244ce4 | 120 | struct regmap *regmap; |
f0fba2ad | 121 | |
d58d5d55 | 122 | int sysclk; |
f0fba2ad | 123 | int irq; |
d58d5d55 | 124 | |
69fff9bb MB |
125 | int fs; |
126 | int deemph; | |
127 | ||
c5b6a9fe MB |
128 | int dcs_pending; |
129 | int dcs_cache[4]; | |
130 | ||
f2c1fe09 | 131 | /* Reference count */ |
d58d5d55 | 132 | int class_w_users; |
d58d5d55 | 133 | |
7245387e MB |
134 | struct snd_soc_jack *mic_jack; |
135 | int mic_det; | |
136 | int mic_short; | |
137 | int mic_last_report; | |
138 | int mic_delay; | |
7cfe5617 SW |
139 | |
140 | #ifdef CONFIG_GPIOLIB | |
141 | struct gpio_chip gpio_chip; | |
142 | #endif | |
d58d5d55 MB |
143 | }; |
144 | ||
ee244ce4 MB |
145 | static bool wm8903_readable_register(struct device *dev, unsigned int reg) |
146 | { | |
147 | switch (reg) { | |
148 | case WM8903_SW_RESET_AND_ID: | |
149 | case WM8903_REVISION_NUMBER: | |
150 | case WM8903_BIAS_CONTROL_0: | |
151 | case WM8903_VMID_CONTROL_0: | |
152 | case WM8903_MIC_BIAS_CONTROL_0: | |
153 | case WM8903_ANALOGUE_DAC_0: | |
154 | case WM8903_ANALOGUE_ADC_0: | |
155 | case WM8903_POWER_MANAGEMENT_0: | |
156 | case WM8903_POWER_MANAGEMENT_1: | |
157 | case WM8903_POWER_MANAGEMENT_2: | |
158 | case WM8903_POWER_MANAGEMENT_3: | |
159 | case WM8903_POWER_MANAGEMENT_4: | |
160 | case WM8903_POWER_MANAGEMENT_5: | |
161 | case WM8903_POWER_MANAGEMENT_6: | |
162 | case WM8903_CLOCK_RATES_0: | |
163 | case WM8903_CLOCK_RATES_1: | |
164 | case WM8903_CLOCK_RATES_2: | |
165 | case WM8903_AUDIO_INTERFACE_0: | |
166 | case WM8903_AUDIO_INTERFACE_1: | |
167 | case WM8903_AUDIO_INTERFACE_2: | |
168 | case WM8903_AUDIO_INTERFACE_3: | |
169 | case WM8903_DAC_DIGITAL_VOLUME_LEFT: | |
170 | case WM8903_DAC_DIGITAL_VOLUME_RIGHT: | |
171 | case WM8903_DAC_DIGITAL_0: | |
172 | case WM8903_DAC_DIGITAL_1: | |
173 | case WM8903_ADC_DIGITAL_VOLUME_LEFT: | |
174 | case WM8903_ADC_DIGITAL_VOLUME_RIGHT: | |
175 | case WM8903_ADC_DIGITAL_0: | |
176 | case WM8903_DIGITAL_MICROPHONE_0: | |
177 | case WM8903_DRC_0: | |
178 | case WM8903_DRC_1: | |
179 | case WM8903_DRC_2: | |
180 | case WM8903_DRC_3: | |
181 | case WM8903_ANALOGUE_LEFT_INPUT_0: | |
182 | case WM8903_ANALOGUE_RIGHT_INPUT_0: | |
183 | case WM8903_ANALOGUE_LEFT_INPUT_1: | |
184 | case WM8903_ANALOGUE_RIGHT_INPUT_1: | |
185 | case WM8903_ANALOGUE_LEFT_MIX_0: | |
186 | case WM8903_ANALOGUE_RIGHT_MIX_0: | |
187 | case WM8903_ANALOGUE_SPK_MIX_LEFT_0: | |
188 | case WM8903_ANALOGUE_SPK_MIX_LEFT_1: | |
189 | case WM8903_ANALOGUE_SPK_MIX_RIGHT_0: | |
190 | case WM8903_ANALOGUE_SPK_MIX_RIGHT_1: | |
191 | case WM8903_ANALOGUE_OUT1_LEFT: | |
192 | case WM8903_ANALOGUE_OUT1_RIGHT: | |
193 | case WM8903_ANALOGUE_OUT2_LEFT: | |
194 | case WM8903_ANALOGUE_OUT2_RIGHT: | |
195 | case WM8903_ANALOGUE_OUT3_LEFT: | |
196 | case WM8903_ANALOGUE_OUT3_RIGHT: | |
197 | case WM8903_ANALOGUE_SPK_OUTPUT_CONTROL_0: | |
198 | case WM8903_DC_SERVO_0: | |
199 | case WM8903_DC_SERVO_2: | |
200 | case WM8903_DC_SERVO_READBACK_1: | |
201 | case WM8903_DC_SERVO_READBACK_2: | |
202 | case WM8903_DC_SERVO_READBACK_3: | |
203 | case WM8903_DC_SERVO_READBACK_4: | |
204 | case WM8903_ANALOGUE_HP_0: | |
205 | case WM8903_ANALOGUE_LINEOUT_0: | |
206 | case WM8903_CHARGE_PUMP_0: | |
207 | case WM8903_CLASS_W_0: | |
208 | case WM8903_WRITE_SEQUENCER_0: | |
209 | case WM8903_WRITE_SEQUENCER_1: | |
210 | case WM8903_WRITE_SEQUENCER_2: | |
211 | case WM8903_WRITE_SEQUENCER_3: | |
212 | case WM8903_WRITE_SEQUENCER_4: | |
213 | case WM8903_CONTROL_INTERFACE: | |
214 | case WM8903_GPIO_CONTROL_1: | |
215 | case WM8903_GPIO_CONTROL_2: | |
216 | case WM8903_GPIO_CONTROL_3: | |
217 | case WM8903_GPIO_CONTROL_4: | |
218 | case WM8903_GPIO_CONTROL_5: | |
219 | case WM8903_INTERRUPT_STATUS_1: | |
220 | case WM8903_INTERRUPT_STATUS_1_MASK: | |
221 | case WM8903_INTERRUPT_POLARITY_1: | |
222 | case WM8903_INTERRUPT_CONTROL: | |
223 | case WM8903_CLOCK_RATE_TEST_4: | |
224 | case WM8903_ANALOGUE_OUTPUT_BIAS_0: | |
225 | return true; | |
226 | default: | |
227 | return false; | |
228 | } | |
229 | } | |
230 | ||
231 | static bool wm8903_volatile_register(struct device *dev, unsigned int reg) | |
f1c0a02f MB |
232 | { |
233 | switch (reg) { | |
234 | case WM8903_SW_RESET_AND_ID: | |
235 | case WM8903_REVISION_NUMBER: | |
236 | case WM8903_INTERRUPT_STATUS_1: | |
237 | case WM8903_WRITE_SEQUENCER_4: | |
c5b6a9fe MB |
238 | case WM8903_DC_SERVO_READBACK_1: |
239 | case WM8903_DC_SERVO_READBACK_2: | |
240 | case WM8903_DC_SERVO_READBACK_3: | |
241 | case WM8903_DC_SERVO_READBACK_4: | |
8d50e447 | 242 | return 1; |
f1c0a02f MB |
243 | |
244 | default: | |
f1c0a02f | 245 | return 0; |
8d50e447 | 246 | } |
f1c0a02f MB |
247 | } |
248 | ||
42768a12 MB |
249 | static int wm8903_cp_event(struct snd_soc_dapm_widget *w, |
250 | struct snd_kcontrol *kcontrol, int event) | |
251 | { | |
252 | WARN_ON(event != SND_SOC_DAPM_POST_PMU); | |
253 | mdelay(4); | |
254 | ||
255 | return 0; | |
256 | } | |
257 | ||
c5b6a9fe MB |
258 | static int wm8903_dcs_event(struct snd_soc_dapm_widget *w, |
259 | struct snd_kcontrol *kcontrol, int event) | |
260 | { | |
261 | struct snd_soc_codec *codec = w->codec; | |
262 | struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec); | |
263 | ||
264 | switch (event) { | |
265 | case SND_SOC_DAPM_POST_PMU: | |
266 | wm8903->dcs_pending |= 1 << w->shift; | |
267 | break; | |
268 | case SND_SOC_DAPM_PRE_PMD: | |
269 | snd_soc_update_bits(codec, WM8903_DC_SERVO_0, | |
270 | 1 << w->shift, 0); | |
271 | break; | |
272 | } | |
273 | ||
274 | return 0; | |
275 | } | |
276 | ||
277 | #define WM8903_DCS_MODE_WRITE_STOP 0 | |
278 | #define WM8903_DCS_MODE_START_STOP 2 | |
279 | ||
280 | static void wm8903_seq_notifier(struct snd_soc_dapm_context *dapm, | |
281 | enum snd_soc_dapm_type event, int subseq) | |
282 | { | |
283 | struct snd_soc_codec *codec = container_of(dapm, | |
284 | struct snd_soc_codec, dapm); | |
285 | struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec); | |
286 | int dcs_mode = WM8903_DCS_MODE_WRITE_STOP; | |
287 | int i, val; | |
288 | ||
289 | /* Complete any pending DC servo starts */ | |
290 | if (wm8903->dcs_pending) { | |
291 | dev_dbg(codec->dev, "Starting DC servo for %x\n", | |
292 | wm8903->dcs_pending); | |
293 | ||
294 | /* If we've no cached values then we need to do startup */ | |
295 | for (i = 0; i < ARRAY_SIZE(wm8903->dcs_cache); i++) { | |
296 | if (!(wm8903->dcs_pending & (1 << i))) | |
297 | continue; | |
298 | ||
299 | if (wm8903->dcs_cache[i]) { | |
300 | dev_dbg(codec->dev, | |
301 | "Restore DC servo %d value %x\n", | |
302 | 3 - i, wm8903->dcs_cache[i]); | |
303 | ||
304 | snd_soc_write(codec, WM8903_DC_SERVO_4 + i, | |
305 | wm8903->dcs_cache[i] & 0xff); | |
306 | } else { | |
307 | dev_dbg(codec->dev, | |
308 | "Calibrate DC servo %d\n", 3 - i); | |
309 | dcs_mode = WM8903_DCS_MODE_START_STOP; | |
310 | } | |
311 | } | |
312 | ||
313 | /* Don't trust the cache for analogue */ | |
314 | if (wm8903->class_w_users) | |
315 | dcs_mode = WM8903_DCS_MODE_START_STOP; | |
316 | ||
317 | snd_soc_update_bits(codec, WM8903_DC_SERVO_2, | |
318 | WM8903_DCS_MODE_MASK, dcs_mode); | |
319 | ||
320 | snd_soc_update_bits(codec, WM8903_DC_SERVO_0, | |
321 | WM8903_DCS_ENA_MASK, wm8903->dcs_pending); | |
322 | ||
323 | switch (dcs_mode) { | |
324 | case WM8903_DCS_MODE_WRITE_STOP: | |
325 | break; | |
326 | ||
327 | case WM8903_DCS_MODE_START_STOP: | |
328 | msleep(270); | |
329 | ||
330 | /* Cache the measured offsets for digital */ | |
331 | if (wm8903->class_w_users) | |
332 | break; | |
333 | ||
334 | for (i = 0; i < ARRAY_SIZE(wm8903->dcs_cache); i++) { | |
335 | if (!(wm8903->dcs_pending & (1 << i))) | |
336 | continue; | |
337 | ||
338 | val = snd_soc_read(codec, | |
339 | WM8903_DC_SERVO_READBACK_1 + i); | |
340 | dev_dbg(codec->dev, "DC servo %d: %x\n", | |
341 | 3 - i, val); | |
342 | wm8903->dcs_cache[i] = val; | |
343 | } | |
344 | break; | |
345 | ||
346 | default: | |
347 | pr_warn("DCS mode %d delay not set\n", dcs_mode); | |
348 | break; | |
349 | } | |
350 | ||
351 | wm8903->dcs_pending = 0; | |
352 | } | |
353 | } | |
354 | ||
f1c0a02f MB |
355 | /* |
356 | * When used with DAC outputs only the WM8903 charge pump supports | |
357 | * operation in class W mode, providing very low power consumption | |
358 | * when used with digital sources. Enable and disable this mode | |
359 | * automatically depending on the mixer configuration. | |
360 | * | |
361 | * All the relevant controls are simple switches. | |
362 | */ | |
363 | static int wm8903_class_w_put(struct snd_kcontrol *kcontrol, | |
364 | struct snd_ctl_elem_value *ucontrol) | |
365 | { | |
9d03545d JN |
366 | struct snd_soc_dapm_widget_list *wlist = snd_kcontrol_chip(kcontrol); |
367 | struct snd_soc_dapm_widget *widget = wlist->widgets[0]; | |
f1c0a02f | 368 | struct snd_soc_codec *codec = widget->codec; |
b2c812e2 | 369 | struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec); |
f1c0a02f MB |
370 | u16 reg; |
371 | int ret; | |
372 | ||
8d50e447 | 373 | reg = snd_soc_read(codec, WM8903_CLASS_W_0); |
f1c0a02f MB |
374 | |
375 | /* Turn it off if we're about to enable bypass */ | |
376 | if (ucontrol->value.integer.value[0]) { | |
377 | if (wm8903->class_w_users == 0) { | |
f0fba2ad | 378 | dev_dbg(codec->dev, "Disabling Class W\n"); |
8d50e447 | 379 | snd_soc_write(codec, WM8903_CLASS_W_0, reg & |
f1c0a02f MB |
380 | ~(WM8903_CP_DYN_FREQ | WM8903_CP_DYN_V)); |
381 | } | |
382 | wm8903->class_w_users++; | |
383 | } | |
384 | ||
385 | /* Implement the change */ | |
386 | ret = snd_soc_dapm_put_volsw(kcontrol, ucontrol); | |
387 | ||
388 | /* If we've just disabled the last bypass path turn Class W on */ | |
389 | if (!ucontrol->value.integer.value[0]) { | |
390 | if (wm8903->class_w_users == 1) { | |
f0fba2ad | 391 | dev_dbg(codec->dev, "Enabling Class W\n"); |
8d50e447 | 392 | snd_soc_write(codec, WM8903_CLASS_W_0, reg | |
f1c0a02f MB |
393 | WM8903_CP_DYN_FREQ | WM8903_CP_DYN_V); |
394 | } | |
395 | wm8903->class_w_users--; | |
396 | } | |
397 | ||
f0fba2ad | 398 | dev_dbg(codec->dev, "Bypass use count now %d\n", |
f1c0a02f MB |
399 | wm8903->class_w_users); |
400 | ||
401 | return ret; | |
402 | } | |
403 | ||
404 | #define SOC_DAPM_SINGLE_W(xname, reg, shift, max, invert) \ | |
405 | { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ | |
406 | .info = snd_soc_info_volsw, \ | |
407 | .get = snd_soc_dapm_get_volsw, .put = wm8903_class_w_put, \ | |
408 | .private_value = SOC_SINGLE_VALUE(reg, shift, max, invert) } | |
409 | ||
410 | ||
69fff9bb MB |
411 | static int wm8903_deemph[] = { 0, 32000, 44100, 48000 }; |
412 | ||
413 | static int wm8903_set_deemph(struct snd_soc_codec *codec) | |
414 | { | |
415 | struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec); | |
416 | int val, i, best; | |
417 | ||
418 | /* If we're using deemphasis select the nearest available sample | |
419 | * rate. | |
420 | */ | |
421 | if (wm8903->deemph) { | |
422 | best = 1; | |
423 | for (i = 2; i < ARRAY_SIZE(wm8903_deemph); i++) { | |
424 | if (abs(wm8903_deemph[i] - wm8903->fs) < | |
425 | abs(wm8903_deemph[best] - wm8903->fs)) | |
426 | best = i; | |
427 | } | |
428 | ||
429 | val = best << WM8903_DEEMPH_SHIFT; | |
430 | } else { | |
431 | best = 0; | |
432 | val = 0; | |
433 | } | |
434 | ||
435 | dev_dbg(codec->dev, "Set deemphasis %d (%dHz)\n", | |
436 | best, wm8903_deemph[best]); | |
437 | ||
438 | return snd_soc_update_bits(codec, WM8903_DAC_DIGITAL_1, | |
439 | WM8903_DEEMPH_MASK, val); | |
440 | } | |
441 | ||
442 | static int wm8903_get_deemph(struct snd_kcontrol *kcontrol, | |
443 | struct snd_ctl_elem_value *ucontrol) | |
444 | { | |
445 | struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); | |
446 | struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec); | |
447 | ||
448 | ucontrol->value.enumerated.item[0] = wm8903->deemph; | |
449 | ||
450 | return 0; | |
451 | } | |
452 | ||
453 | static int wm8903_put_deemph(struct snd_kcontrol *kcontrol, | |
454 | struct snd_ctl_elem_value *ucontrol) | |
455 | { | |
456 | struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); | |
457 | struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec); | |
458 | int deemph = ucontrol->value.enumerated.item[0]; | |
459 | int ret = 0; | |
460 | ||
461 | if (deemph > 1) | |
462 | return -EINVAL; | |
463 | ||
464 | mutex_lock(&codec->mutex); | |
465 | if (wm8903->deemph != deemph) { | |
466 | wm8903->deemph = deemph; | |
467 | ||
468 | wm8903_set_deemph(codec); | |
469 | ||
470 | ret = 1; | |
471 | } | |
472 | mutex_unlock(&codec->mutex); | |
473 | ||
474 | return ret; | |
475 | } | |
476 | ||
f1c0a02f MB |
477 | /* ALSA can only do steps of .01dB */ |
478 | static const DECLARE_TLV_DB_SCALE(digital_tlv, -7200, 75, 1); | |
479 | ||
291ce18c | 480 | static const DECLARE_TLV_DB_SCALE(digital_sidetone_tlv, -3600, 300, 0); |
f1c0a02f MB |
481 | static const DECLARE_TLV_DB_SCALE(out_tlv, -5700, 100, 0); |
482 | ||
483 | static const DECLARE_TLV_DB_SCALE(drc_tlv_thresh, 0, 75, 0); | |
484 | static const DECLARE_TLV_DB_SCALE(drc_tlv_amp, -2250, 75, 0); | |
485 | static const DECLARE_TLV_DB_SCALE(drc_tlv_min, 0, 600, 0); | |
486 | static const DECLARE_TLV_DB_SCALE(drc_tlv_max, 1200, 600, 0); | |
487 | static const DECLARE_TLV_DB_SCALE(drc_tlv_startup, -300, 50, 0); | |
488 | ||
460f4aae MB |
489 | static const char *hpf_mode_text[] = { |
490 | "Hi-fi", "Voice 1", "Voice 2", "Voice 3" | |
491 | }; | |
492 | ||
493 | static const struct soc_enum hpf_mode = | |
494 | SOC_ENUM_SINGLE(WM8903_ADC_DIGITAL_0, 5, 4, hpf_mode_text); | |
495 | ||
dcf9ada3 MB |
496 | static const char *osr_text[] = { |
497 | "Low power", "High performance" | |
498 | }; | |
499 | ||
500 | static const struct soc_enum adc_osr = | |
501 | SOC_ENUM_SINGLE(WM8903_ANALOGUE_ADC_0, 0, 2, osr_text); | |
502 | ||
503 | static const struct soc_enum dac_osr = | |
504 | SOC_ENUM_SINGLE(WM8903_DAC_DIGITAL_1, 0, 2, osr_text); | |
505 | ||
f1c0a02f MB |
506 | static const char *drc_slope_text[] = { |
507 | "1", "1/2", "1/4", "1/8", "1/16", "0" | |
508 | }; | |
509 | ||
510 | static const struct soc_enum drc_slope_r0 = | |
511 | SOC_ENUM_SINGLE(WM8903_DRC_2, 3, 6, drc_slope_text); | |
512 | ||
513 | static const struct soc_enum drc_slope_r1 = | |
514 | SOC_ENUM_SINGLE(WM8903_DRC_2, 0, 6, drc_slope_text); | |
515 | ||
516 | static const char *drc_attack_text[] = { | |
517 | "instantaneous", | |
518 | "363us", "762us", "1.45ms", "2.9ms", "5.8ms", "11.6ms", "23.2ms", | |
519 | "46.4ms", "92.8ms", "185.6ms" | |
520 | }; | |
521 | ||
522 | static const struct soc_enum drc_attack = | |
523 | SOC_ENUM_SINGLE(WM8903_DRC_1, 12, 11, drc_attack_text); | |
524 | ||
525 | static const char *drc_decay_text[] = { | |
526 | "186ms", "372ms", "743ms", "1.49s", "2.97s", "5.94s", "11.89s", | |
527 | "23.87s", "47.56s" | |
528 | }; | |
529 | ||
530 | static const struct soc_enum drc_decay = | |
531 | SOC_ENUM_SINGLE(WM8903_DRC_1, 8, 9, drc_decay_text); | |
532 | ||
533 | static const char *drc_ff_delay_text[] = { | |
534 | "5 samples", "9 samples" | |
535 | }; | |
536 | ||
537 | static const struct soc_enum drc_ff_delay = | |
538 | SOC_ENUM_SINGLE(WM8903_DRC_0, 5, 2, drc_ff_delay_text); | |
539 | ||
540 | static const char *drc_qr_decay_text[] = { | |
541 | "0.725ms", "1.45ms", "5.8ms" | |
542 | }; | |
543 | ||
544 | static const struct soc_enum drc_qr_decay = | |
545 | SOC_ENUM_SINGLE(WM8903_DRC_1, 4, 3, drc_qr_decay_text); | |
546 | ||
547 | static const char *drc_smoothing_text[] = { | |
548 | "Low", "Medium", "High" | |
549 | }; | |
550 | ||
551 | static const struct soc_enum drc_smoothing = | |
552 | SOC_ENUM_SINGLE(WM8903_DRC_0, 11, 3, drc_smoothing_text); | |
553 | ||
554 | static const char *soft_mute_text[] = { | |
555 | "Fast (fs/2)", "Slow (fs/32)" | |
556 | }; | |
557 | ||
558 | static const struct soc_enum soft_mute = | |
559 | SOC_ENUM_SINGLE(WM8903_DAC_DIGITAL_1, 10, 2, soft_mute_text); | |
560 | ||
561 | static const char *mute_mode_text[] = { | |
562 | "Hard", "Soft" | |
563 | }; | |
564 | ||
565 | static const struct soc_enum mute_mode = | |
566 | SOC_ENUM_SINGLE(WM8903_DAC_DIGITAL_1, 9, 2, mute_mode_text); | |
567 | ||
f1c0a02f MB |
568 | static const char *companding_text[] = { |
569 | "ulaw", "alaw" | |
570 | }; | |
571 | ||
572 | static const struct soc_enum dac_companding = | |
573 | SOC_ENUM_SINGLE(WM8903_AUDIO_INTERFACE_0, 0, 2, companding_text); | |
574 | ||
575 | static const struct soc_enum adc_companding = | |
576 | SOC_ENUM_SINGLE(WM8903_AUDIO_INTERFACE_0, 2, 2, companding_text); | |
577 | ||
578 | static const char *input_mode_text[] = { | |
579 | "Single-Ended", "Differential Line", "Differential Mic" | |
580 | }; | |
581 | ||
582 | static const struct soc_enum linput_mode_enum = | |
583 | SOC_ENUM_SINGLE(WM8903_ANALOGUE_LEFT_INPUT_1, 0, 3, input_mode_text); | |
584 | ||
585 | static const struct soc_enum rinput_mode_enum = | |
586 | SOC_ENUM_SINGLE(WM8903_ANALOGUE_RIGHT_INPUT_1, 0, 3, input_mode_text); | |
587 | ||
588 | static const char *linput_mux_text[] = { | |
589 | "IN1L", "IN2L", "IN3L" | |
590 | }; | |
591 | ||
592 | static const struct soc_enum linput_enum = | |
593 | SOC_ENUM_SINGLE(WM8903_ANALOGUE_LEFT_INPUT_1, 2, 3, linput_mux_text); | |
594 | ||
595 | static const struct soc_enum linput_inv_enum = | |
596 | SOC_ENUM_SINGLE(WM8903_ANALOGUE_LEFT_INPUT_1, 4, 3, linput_mux_text); | |
597 | ||
598 | static const char *rinput_mux_text[] = { | |
599 | "IN1R", "IN2R", "IN3R" | |
600 | }; | |
601 | ||
602 | static const struct soc_enum rinput_enum = | |
603 | SOC_ENUM_SINGLE(WM8903_ANALOGUE_RIGHT_INPUT_1, 2, 3, rinput_mux_text); | |
604 | ||
605 | static const struct soc_enum rinput_inv_enum = | |
606 | SOC_ENUM_SINGLE(WM8903_ANALOGUE_RIGHT_INPUT_1, 4, 3, rinput_mux_text); | |
607 | ||
608 | ||
291ce18c MB |
609 | static const char *sidetone_text[] = { |
610 | "None", "Left", "Right" | |
611 | }; | |
612 | ||
613 | static const struct soc_enum lsidetone_enum = | |
614 | SOC_ENUM_SINGLE(WM8903_DAC_DIGITAL_0, 2, 3, sidetone_text); | |
615 | ||
616 | static const struct soc_enum rsidetone_enum = | |
617 | SOC_ENUM_SINGLE(WM8903_DAC_DIGITAL_0, 0, 3, sidetone_text); | |
618 | ||
97945c46 SW |
619 | static const char *adcinput_text[] = { |
620 | "ADC", "DMIC" | |
621 | }; | |
622 | ||
623 | static const struct soc_enum adcinput_enum = | |
624 | SOC_ENUM_SINGLE(WM8903_CLOCK_RATE_TEST_4, 9, 2, adcinput_text); | |
625 | ||
1e113bf9 MB |
626 | static const char *aif_text[] = { |
627 | "Left", "Right" | |
628 | }; | |
629 | ||
630 | static const struct soc_enum lcapture_enum = | |
631 | SOC_ENUM_SINGLE(WM8903_AUDIO_INTERFACE_0, 7, 2, aif_text); | |
632 | ||
633 | static const struct soc_enum rcapture_enum = | |
634 | SOC_ENUM_SINGLE(WM8903_AUDIO_INTERFACE_0, 6, 2, aif_text); | |
635 | ||
636 | static const struct soc_enum lplay_enum = | |
637 | SOC_ENUM_SINGLE(WM8903_AUDIO_INTERFACE_0, 5, 2, aif_text); | |
638 | ||
639 | static const struct soc_enum rplay_enum = | |
640 | SOC_ENUM_SINGLE(WM8903_AUDIO_INTERFACE_0, 4, 2, aif_text); | |
641 | ||
f1c0a02f MB |
642 | static const struct snd_kcontrol_new wm8903_snd_controls[] = { |
643 | ||
644 | /* Input PGAs - No TLV since the scale depends on PGA mode */ | |
645 | SOC_SINGLE("Left Input PGA Switch", WM8903_ANALOGUE_LEFT_INPUT_0, | |
5715952b | 646 | 7, 1, 1), |
f1c0a02f MB |
647 | SOC_SINGLE("Left Input PGA Volume", WM8903_ANALOGUE_LEFT_INPUT_0, |
648 | 0, 31, 0), | |
649 | SOC_SINGLE("Left Input PGA Common Mode Switch", WM8903_ANALOGUE_LEFT_INPUT_1, | |
650 | 6, 1, 0), | |
651 | ||
652 | SOC_SINGLE("Right Input PGA Switch", WM8903_ANALOGUE_RIGHT_INPUT_0, | |
5715952b | 653 | 7, 1, 1), |
f1c0a02f MB |
654 | SOC_SINGLE("Right Input PGA Volume", WM8903_ANALOGUE_RIGHT_INPUT_0, |
655 | 0, 31, 0), | |
656 | SOC_SINGLE("Right Input PGA Common Mode Switch", WM8903_ANALOGUE_RIGHT_INPUT_1, | |
657 | 6, 1, 0), | |
658 | ||
659 | /* ADCs */ | |
dcf9ada3 | 660 | SOC_ENUM("ADC OSR", adc_osr), |
460f4aae MB |
661 | SOC_SINGLE("HPF Switch", WM8903_ADC_DIGITAL_0, 4, 1, 0), |
662 | SOC_ENUM("HPF Mode", hpf_mode), | |
f1c0a02f MB |
663 | SOC_SINGLE("DRC Switch", WM8903_DRC_0, 15, 1, 0), |
664 | SOC_ENUM("DRC Compressor Slope R0", drc_slope_r0), | |
665 | SOC_ENUM("DRC Compressor Slope R1", drc_slope_r1), | |
af901ca1 | 666 | SOC_SINGLE_TLV("DRC Compressor Threshold Volume", WM8903_DRC_3, 5, 124, 1, |
f1c0a02f MB |
667 | drc_tlv_thresh), |
668 | SOC_SINGLE_TLV("DRC Volume", WM8903_DRC_3, 0, 30, 1, drc_tlv_amp), | |
669 | SOC_SINGLE_TLV("DRC Minimum Gain Volume", WM8903_DRC_1, 2, 3, 1, drc_tlv_min), | |
670 | SOC_SINGLE_TLV("DRC Maximum Gain Volume", WM8903_DRC_1, 0, 3, 0, drc_tlv_max), | |
671 | SOC_ENUM("DRC Attack Rate", drc_attack), | |
672 | SOC_ENUM("DRC Decay Rate", drc_decay), | |
673 | SOC_ENUM("DRC FF Delay", drc_ff_delay), | |
674 | SOC_SINGLE("DRC Anticlip Switch", WM8903_DRC_0, 1, 1, 0), | |
675 | SOC_SINGLE("DRC QR Switch", WM8903_DRC_0, 2, 1, 0), | |
af901ca1 | 676 | SOC_SINGLE_TLV("DRC QR Threshold Volume", WM8903_DRC_0, 6, 3, 0, drc_tlv_max), |
f1c0a02f MB |
677 | SOC_ENUM("DRC QR Decay Rate", drc_qr_decay), |
678 | SOC_SINGLE("DRC Smoothing Switch", WM8903_DRC_0, 3, 1, 0), | |
679 | SOC_SINGLE("DRC Smoothing Hysteresis Switch", WM8903_DRC_0, 0, 1, 0), | |
af901ca1 | 680 | SOC_ENUM("DRC Smoothing Threshold", drc_smoothing), |
f1c0a02f MB |
681 | SOC_SINGLE_TLV("DRC Startup Volume", WM8903_DRC_0, 6, 18, 0, drc_tlv_startup), |
682 | ||
683 | SOC_DOUBLE_R_TLV("Digital Capture Volume", WM8903_ADC_DIGITAL_VOLUME_LEFT, | |
61bf35b9 | 684 | WM8903_ADC_DIGITAL_VOLUME_RIGHT, 1, 120, 0, digital_tlv), |
f1c0a02f MB |
685 | SOC_ENUM("ADC Companding Mode", adc_companding), |
686 | SOC_SINGLE("ADC Companding Switch", WM8903_AUDIO_INTERFACE_0, 3, 1, 0), | |
687 | ||
291ce18c MB |
688 | SOC_DOUBLE_TLV("Digital Sidetone Volume", WM8903_DAC_DIGITAL_0, 4, 8, |
689 | 12, 0, digital_sidetone_tlv), | |
690 | ||
f1c0a02f | 691 | /* DAC */ |
dcf9ada3 | 692 | SOC_ENUM("DAC OSR", dac_osr), |
f1c0a02f MB |
693 | SOC_DOUBLE_R_TLV("Digital Playback Volume", WM8903_DAC_DIGITAL_VOLUME_LEFT, |
694 | WM8903_DAC_DIGITAL_VOLUME_RIGHT, 1, 120, 0, digital_tlv), | |
695 | SOC_ENUM("DAC Soft Mute Rate", soft_mute), | |
696 | SOC_ENUM("DAC Mute Mode", mute_mode), | |
697 | SOC_SINGLE("DAC Mono Switch", WM8903_DAC_DIGITAL_1, 12, 1, 0), | |
f1c0a02f MB |
698 | SOC_ENUM("DAC Companding Mode", dac_companding), |
699 | SOC_SINGLE("DAC Companding Switch", WM8903_AUDIO_INTERFACE_0, 1, 1, 0), | |
69fff9bb MB |
700 | SOC_SINGLE_BOOL_EXT("Playback Deemphasis Switch", 0, |
701 | wm8903_get_deemph, wm8903_put_deemph), | |
f1c0a02f MB |
702 | |
703 | /* Headphones */ | |
704 | SOC_DOUBLE_R("Headphone Switch", | |
705 | WM8903_ANALOGUE_OUT1_LEFT, WM8903_ANALOGUE_OUT1_RIGHT, | |
706 | 8, 1, 1), | |
707 | SOC_DOUBLE_R("Headphone ZC Switch", | |
708 | WM8903_ANALOGUE_OUT1_LEFT, WM8903_ANALOGUE_OUT1_RIGHT, | |
709 | 6, 1, 0), | |
710 | SOC_DOUBLE_R_TLV("Headphone Volume", | |
711 | WM8903_ANALOGUE_OUT1_LEFT, WM8903_ANALOGUE_OUT1_RIGHT, | |
712 | 0, 63, 0, out_tlv), | |
713 | ||
714 | /* Line out */ | |
715 | SOC_DOUBLE_R("Line Out Switch", | |
716 | WM8903_ANALOGUE_OUT2_LEFT, WM8903_ANALOGUE_OUT2_RIGHT, | |
717 | 8, 1, 1), | |
718 | SOC_DOUBLE_R("Line Out ZC Switch", | |
719 | WM8903_ANALOGUE_OUT2_LEFT, WM8903_ANALOGUE_OUT2_RIGHT, | |
720 | 6, 1, 0), | |
721 | SOC_DOUBLE_R_TLV("Line Out Volume", | |
722 | WM8903_ANALOGUE_OUT2_LEFT, WM8903_ANALOGUE_OUT2_RIGHT, | |
723 | 0, 63, 0, out_tlv), | |
724 | ||
725 | /* Speaker */ | |
726 | SOC_DOUBLE_R("Speaker Switch", | |
727 | WM8903_ANALOGUE_OUT3_LEFT, WM8903_ANALOGUE_OUT3_RIGHT, 8, 1, 1), | |
728 | SOC_DOUBLE_R("Speaker ZC Switch", | |
729 | WM8903_ANALOGUE_OUT3_LEFT, WM8903_ANALOGUE_OUT3_RIGHT, 6, 1, 0), | |
730 | SOC_DOUBLE_R_TLV("Speaker Volume", | |
731 | WM8903_ANALOGUE_OUT3_LEFT, WM8903_ANALOGUE_OUT3_RIGHT, | |
732 | 0, 63, 0, out_tlv), | |
733 | }; | |
734 | ||
f1c0a02f MB |
735 | static const struct snd_kcontrol_new linput_mode_mux = |
736 | SOC_DAPM_ENUM("Left Input Mode Mux", linput_mode_enum); | |
737 | ||
738 | static const struct snd_kcontrol_new rinput_mode_mux = | |
739 | SOC_DAPM_ENUM("Right Input Mode Mux", rinput_mode_enum); | |
740 | ||
741 | static const struct snd_kcontrol_new linput_mux = | |
742 | SOC_DAPM_ENUM("Left Input Mux", linput_enum); | |
743 | ||
744 | static const struct snd_kcontrol_new linput_inv_mux = | |
745 | SOC_DAPM_ENUM("Left Inverting Input Mux", linput_inv_enum); | |
746 | ||
747 | static const struct snd_kcontrol_new rinput_mux = | |
748 | SOC_DAPM_ENUM("Right Input Mux", rinput_enum); | |
749 | ||
750 | static const struct snd_kcontrol_new rinput_inv_mux = | |
751 | SOC_DAPM_ENUM("Right Inverting Input Mux", rinput_inv_enum); | |
752 | ||
291ce18c MB |
753 | static const struct snd_kcontrol_new lsidetone_mux = |
754 | SOC_DAPM_ENUM("DACL Sidetone Mux", lsidetone_enum); | |
755 | ||
756 | static const struct snd_kcontrol_new rsidetone_mux = | |
757 | SOC_DAPM_ENUM("DACR Sidetone Mux", rsidetone_enum); | |
758 | ||
97945c46 SW |
759 | static const struct snd_kcontrol_new adcinput_mux = |
760 | SOC_DAPM_ENUM("ADC Input", adcinput_enum); | |
761 | ||
1e113bf9 MB |
762 | static const struct snd_kcontrol_new lcapture_mux = |
763 | SOC_DAPM_ENUM("Left Capture Mux", lcapture_enum); | |
764 | ||
765 | static const struct snd_kcontrol_new rcapture_mux = | |
766 | SOC_DAPM_ENUM("Right Capture Mux", rcapture_enum); | |
767 | ||
768 | static const struct snd_kcontrol_new lplay_mux = | |
769 | SOC_DAPM_ENUM("Left Playback Mux", lplay_enum); | |
770 | ||
771 | static const struct snd_kcontrol_new rplay_mux = | |
772 | SOC_DAPM_ENUM("Right Playback Mux", rplay_enum); | |
773 | ||
f1c0a02f MB |
774 | static const struct snd_kcontrol_new left_output_mixer[] = { |
775 | SOC_DAPM_SINGLE("DACL Switch", WM8903_ANALOGUE_LEFT_MIX_0, 3, 1, 0), | |
776 | SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_LEFT_MIX_0, 2, 1, 0), | |
777 | SOC_DAPM_SINGLE_W("Left Bypass Switch", WM8903_ANALOGUE_LEFT_MIX_0, 1, 1, 0), | |
4b4fffdd | 778 | SOC_DAPM_SINGLE_W("Right Bypass Switch", WM8903_ANALOGUE_LEFT_MIX_0, 0, 1, 0), |
f1c0a02f MB |
779 | }; |
780 | ||
781 | static const struct snd_kcontrol_new right_output_mixer[] = { | |
782 | SOC_DAPM_SINGLE("DACL Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 3, 1, 0), | |
783 | SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 2, 1, 0), | |
784 | SOC_DAPM_SINGLE_W("Left Bypass Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 1, 1, 0), | |
4b4fffdd | 785 | SOC_DAPM_SINGLE_W("Right Bypass Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 0, 1, 0), |
f1c0a02f MB |
786 | }; |
787 | ||
788 | static const struct snd_kcontrol_new left_speaker_mixer[] = { | |
789 | SOC_DAPM_SINGLE("DACL Switch", WM8903_ANALOGUE_SPK_MIX_LEFT_0, 3, 1, 0), | |
790 | SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_SPK_MIX_LEFT_0, 2, 1, 0), | |
791 | SOC_DAPM_SINGLE("Left Bypass Switch", WM8903_ANALOGUE_SPK_MIX_LEFT_0, 1, 1, 0), | |
792 | SOC_DAPM_SINGLE("Right Bypass Switch", WM8903_ANALOGUE_SPK_MIX_LEFT_0, | |
4b4fffdd | 793 | 0, 1, 0), |
f1c0a02f MB |
794 | }; |
795 | ||
796 | static const struct snd_kcontrol_new right_speaker_mixer[] = { | |
797 | SOC_DAPM_SINGLE("DACL Switch", WM8903_ANALOGUE_SPK_MIX_RIGHT_0, 3, 1, 0), | |
798 | SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_SPK_MIX_RIGHT_0, 2, 1, 0), | |
799 | SOC_DAPM_SINGLE("Left Bypass Switch", WM8903_ANALOGUE_SPK_MIX_RIGHT_0, | |
800 | 1, 1, 0), | |
801 | SOC_DAPM_SINGLE("Right Bypass Switch", WM8903_ANALOGUE_SPK_MIX_RIGHT_0, | |
4b4fffdd | 802 | 0, 1, 0), |
f1c0a02f MB |
803 | }; |
804 | ||
805 | static const struct snd_soc_dapm_widget wm8903_dapm_widgets[] = { | |
806 | SND_SOC_DAPM_INPUT("IN1L"), | |
807 | SND_SOC_DAPM_INPUT("IN1R"), | |
808 | SND_SOC_DAPM_INPUT("IN2L"), | |
809 | SND_SOC_DAPM_INPUT("IN2R"), | |
810 | SND_SOC_DAPM_INPUT("IN3L"), | |
811 | SND_SOC_DAPM_INPUT("IN3R"), | |
97945c46 | 812 | SND_SOC_DAPM_INPUT("DMICDAT"), |
f1c0a02f MB |
813 | |
814 | SND_SOC_DAPM_OUTPUT("HPOUTL"), | |
815 | SND_SOC_DAPM_OUTPUT("HPOUTR"), | |
816 | SND_SOC_DAPM_OUTPUT("LINEOUTL"), | |
817 | SND_SOC_DAPM_OUTPUT("LINEOUTR"), | |
818 | SND_SOC_DAPM_OUTPUT("LOP"), | |
819 | SND_SOC_DAPM_OUTPUT("LON"), | |
820 | SND_SOC_DAPM_OUTPUT("ROP"), | |
821 | SND_SOC_DAPM_OUTPUT("RON"), | |
822 | ||
5032dc34 | 823 | SND_SOC_DAPM_SUPPLY("MICBIAS", WM8903_MIC_BIAS_CONTROL_0, 0, 0, NULL, 0), |
f1c0a02f MB |
824 | |
825 | SND_SOC_DAPM_MUX("Left Input Mux", SND_SOC_NOPM, 0, 0, &linput_mux), | |
826 | SND_SOC_DAPM_MUX("Left Input Inverting Mux", SND_SOC_NOPM, 0, 0, | |
827 | &linput_inv_mux), | |
828 | SND_SOC_DAPM_MUX("Left Input Mode Mux", SND_SOC_NOPM, 0, 0, &linput_mode_mux), | |
829 | ||
830 | SND_SOC_DAPM_MUX("Right Input Mux", SND_SOC_NOPM, 0, 0, &rinput_mux), | |
831 | SND_SOC_DAPM_MUX("Right Input Inverting Mux", SND_SOC_NOPM, 0, 0, | |
832 | &rinput_inv_mux), | |
833 | SND_SOC_DAPM_MUX("Right Input Mode Mux", SND_SOC_NOPM, 0, 0, &rinput_mode_mux), | |
834 | ||
835 | SND_SOC_DAPM_PGA("Left Input PGA", WM8903_POWER_MANAGEMENT_0, 1, 0, NULL, 0), | |
836 | SND_SOC_DAPM_PGA("Right Input PGA", WM8903_POWER_MANAGEMENT_0, 0, 0, NULL, 0), | |
837 | ||
97945c46 SW |
838 | SND_SOC_DAPM_MUX("Left ADC Input", SND_SOC_NOPM, 0, 0, &adcinput_mux), |
839 | SND_SOC_DAPM_MUX("Right ADC Input", SND_SOC_NOPM, 0, 0, &adcinput_mux), | |
840 | ||
1e113bf9 MB |
841 | SND_SOC_DAPM_ADC("ADCL", NULL, WM8903_POWER_MANAGEMENT_6, 1, 0), |
842 | SND_SOC_DAPM_ADC("ADCR", NULL, WM8903_POWER_MANAGEMENT_6, 0, 0), | |
843 | ||
844 | SND_SOC_DAPM_MUX("Left Capture Mux", SND_SOC_NOPM, 0, 0, &lcapture_mux), | |
845 | SND_SOC_DAPM_MUX("Right Capture Mux", SND_SOC_NOPM, 0, 0, &rcapture_mux), | |
846 | ||
847 | SND_SOC_DAPM_AIF_OUT("AIFTXL", "Left HiFi Capture", 0, SND_SOC_NOPM, 0, 0), | |
848 | SND_SOC_DAPM_AIF_OUT("AIFTXR", "Right HiFi Capture", 0, SND_SOC_NOPM, 0, 0), | |
f1c0a02f | 849 | |
291ce18c MB |
850 | SND_SOC_DAPM_MUX("DACL Sidetone", SND_SOC_NOPM, 0, 0, &lsidetone_mux), |
851 | SND_SOC_DAPM_MUX("DACR Sidetone", SND_SOC_NOPM, 0, 0, &rsidetone_mux), | |
852 | ||
1e113bf9 MB |
853 | SND_SOC_DAPM_AIF_IN("AIFRXL", "Left Playback", 0, SND_SOC_NOPM, 0, 0), |
854 | SND_SOC_DAPM_AIF_IN("AIFRXR", "Right Playback", 0, SND_SOC_NOPM, 0, 0), | |
855 | ||
856 | SND_SOC_DAPM_MUX("Left Playback Mux", SND_SOC_NOPM, 0, 0, &lplay_mux), | |
857 | SND_SOC_DAPM_MUX("Right Playback Mux", SND_SOC_NOPM, 0, 0, &rplay_mux), | |
858 | ||
859 | SND_SOC_DAPM_DAC("DACL", NULL, WM8903_POWER_MANAGEMENT_6, 3, 0), | |
860 | SND_SOC_DAPM_DAC("DACR", NULL, WM8903_POWER_MANAGEMENT_6, 2, 0), | |
f1c0a02f MB |
861 | |
862 | SND_SOC_DAPM_MIXER("Left Output Mixer", WM8903_POWER_MANAGEMENT_1, 1, 0, | |
863 | left_output_mixer, ARRAY_SIZE(left_output_mixer)), | |
864 | SND_SOC_DAPM_MIXER("Right Output Mixer", WM8903_POWER_MANAGEMENT_1, 0, 0, | |
865 | right_output_mixer, ARRAY_SIZE(right_output_mixer)), | |
866 | ||
867 | SND_SOC_DAPM_MIXER("Left Speaker Mixer", WM8903_POWER_MANAGEMENT_4, 1, 0, | |
868 | left_speaker_mixer, ARRAY_SIZE(left_speaker_mixer)), | |
869 | SND_SOC_DAPM_MIXER("Right Speaker Mixer", WM8903_POWER_MANAGEMENT_4, 0, 0, | |
870 | right_speaker_mixer, ARRAY_SIZE(right_speaker_mixer)), | |
871 | ||
1b877cb5 DL |
872 | SND_SOC_DAPM_PGA_S("Left Headphone Output PGA", 0, WM8903_POWER_MANAGEMENT_2, |
873 | 1, 0, NULL, 0), | |
874 | SND_SOC_DAPM_PGA_S("Right Headphone Output PGA", 0, WM8903_POWER_MANAGEMENT_2, | |
13a9983e MB |
875 | 0, 0, NULL, 0), |
876 | ||
1b877cb5 | 877 | SND_SOC_DAPM_PGA_S("Left Line Output PGA", 0, WM8903_POWER_MANAGEMENT_3, 1, 0, |
13a9983e | 878 | NULL, 0), |
1b877cb5 | 879 | SND_SOC_DAPM_PGA_S("Right Line Output PGA", 0, WM8903_POWER_MANAGEMENT_3, 0, 0, |
13a9983e MB |
880 | NULL, 0), |
881 | ||
882 | SND_SOC_DAPM_PGA_S("HPL_RMV_SHORT", 4, WM8903_ANALOGUE_HP_0, 7, 0, NULL, 0), | |
883 | SND_SOC_DAPM_PGA_S("HPL_ENA_OUTP", 3, WM8903_ANALOGUE_HP_0, 6, 0, NULL, 0), | |
1b877cb5 DL |
884 | SND_SOC_DAPM_PGA_S("HPL_ENA_DLY", 2, WM8903_ANALOGUE_HP_0, 5, 0, NULL, 0), |
885 | SND_SOC_DAPM_PGA_S("HPL_ENA", 1, WM8903_ANALOGUE_HP_0, 4, 0, NULL, 0), | |
13a9983e MB |
886 | SND_SOC_DAPM_PGA_S("HPR_RMV_SHORT", 4, WM8903_ANALOGUE_HP_0, 3, 0, NULL, 0), |
887 | SND_SOC_DAPM_PGA_S("HPR_ENA_OUTP", 3, WM8903_ANALOGUE_HP_0, 2, 0, NULL, 0), | |
1b877cb5 DL |
888 | SND_SOC_DAPM_PGA_S("HPR_ENA_DLY", 2, WM8903_ANALOGUE_HP_0, 1, 0, NULL, 0), |
889 | SND_SOC_DAPM_PGA_S("HPR_ENA", 1, WM8903_ANALOGUE_HP_0, 0, 0, NULL, 0), | |
13a9983e MB |
890 | |
891 | SND_SOC_DAPM_PGA_S("LINEOUTL_RMV_SHORT", 4, WM8903_ANALOGUE_LINEOUT_0, 7, 0, | |
892 | NULL, 0), | |
893 | SND_SOC_DAPM_PGA_S("LINEOUTL_ENA_OUTP", 3, WM8903_ANALOGUE_LINEOUT_0, 6, 0, | |
894 | NULL, 0), | |
1b877cb5 DL |
895 | SND_SOC_DAPM_PGA_S("LINEOUTL_ENA_DLY", 2, WM8903_ANALOGUE_LINEOUT_0, 5, 0, |
896 | NULL, 0), | |
897 | SND_SOC_DAPM_PGA_S("LINEOUTL_ENA", 1, WM8903_ANALOGUE_LINEOUT_0, 4, 0, | |
13a9983e MB |
898 | NULL, 0), |
899 | SND_SOC_DAPM_PGA_S("LINEOUTR_RMV_SHORT", 4, WM8903_ANALOGUE_LINEOUT_0, 3, 0, | |
900 | NULL, 0), | |
901 | SND_SOC_DAPM_PGA_S("LINEOUTR_ENA_OUTP", 3, WM8903_ANALOGUE_LINEOUT_0, 2, 0, | |
902 | NULL, 0), | |
1b877cb5 DL |
903 | SND_SOC_DAPM_PGA_S("LINEOUTR_ENA_DLY", 2, WM8903_ANALOGUE_LINEOUT_0, 1, 0, |
904 | NULL, 0), | |
905 | SND_SOC_DAPM_PGA_S("LINEOUTR_ENA", 1, WM8903_ANALOGUE_LINEOUT_0, 0, 0, | |
13a9983e MB |
906 | NULL, 0), |
907 | ||
c5b6a9fe MB |
908 | SND_SOC_DAPM_SUPPLY("DCS Master", WM8903_DC_SERVO_0, 4, 0, NULL, 0), |
909 | SND_SOC_DAPM_PGA_S("HPL_DCS", 3, SND_SOC_NOPM, 3, 0, wm8903_dcs_event, | |
910 | SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), | |
911 | SND_SOC_DAPM_PGA_S("HPR_DCS", 3, SND_SOC_NOPM, 2, 0, wm8903_dcs_event, | |
912 | SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), | |
913 | SND_SOC_DAPM_PGA_S("LINEOUTL_DCS", 3, SND_SOC_NOPM, 1, 0, wm8903_dcs_event, | |
914 | SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), | |
915 | SND_SOC_DAPM_PGA_S("LINEOUTR_DCS", 3, SND_SOC_NOPM, 0, 0, wm8903_dcs_event, | |
916 | SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), | |
f1c0a02f MB |
917 | |
918 | SND_SOC_DAPM_PGA("Left Speaker PGA", WM8903_POWER_MANAGEMENT_5, 1, 0, | |
919 | NULL, 0), | |
920 | SND_SOC_DAPM_PGA("Right Speaker PGA", WM8903_POWER_MANAGEMENT_5, 0, 0, | |
921 | NULL, 0), | |
922 | ||
42768a12 MB |
923 | SND_SOC_DAPM_SUPPLY("Charge Pump", WM8903_CHARGE_PUMP_0, 0, 0, |
924 | wm8903_cp_event, SND_SOC_DAPM_POST_PMU), | |
c2aef4ff | 925 | SND_SOC_DAPM_SUPPLY("CLK_DSP", WM8903_CLOCK_RATES_2, 1, 0, NULL, 0), |
2c8be5a2 | 926 | SND_SOC_DAPM_SUPPLY("CLK_SYS", WM8903_CLOCK_RATES_2, 2, 0, NULL, 0), |
f1c0a02f MB |
927 | }; |
928 | ||
ecd01512 | 929 | static const struct snd_soc_dapm_route wm8903_intercon[] = { |
f1c0a02f | 930 | |
2c8be5a2 | 931 | { "CLK_DSP", NULL, "CLK_SYS" }, |
5032dc34 | 932 | { "MICBIAS", NULL, "CLK_SYS" }, |
2c8be5a2 MB |
933 | { "HPL_DCS", NULL, "CLK_SYS" }, |
934 | { "HPR_DCS", NULL, "CLK_SYS" }, | |
935 | { "LINEOUTL_DCS", NULL, "CLK_SYS" }, | |
936 | { "LINEOUTR_DCS", NULL, "CLK_SYS" }, | |
937 | ||
f1c0a02f MB |
938 | { "Left Input Mux", "IN1L", "IN1L" }, |
939 | { "Left Input Mux", "IN2L", "IN2L" }, | |
940 | { "Left Input Mux", "IN3L", "IN3L" }, | |
941 | ||
942 | { "Left Input Inverting Mux", "IN1L", "IN1L" }, | |
943 | { "Left Input Inverting Mux", "IN2L", "IN2L" }, | |
944 | { "Left Input Inverting Mux", "IN3L", "IN3L" }, | |
945 | ||
946 | { "Right Input Mux", "IN1R", "IN1R" }, | |
947 | { "Right Input Mux", "IN2R", "IN2R" }, | |
948 | { "Right Input Mux", "IN3R", "IN3R" }, | |
949 | ||
950 | { "Right Input Inverting Mux", "IN1R", "IN1R" }, | |
951 | { "Right Input Inverting Mux", "IN2R", "IN2R" }, | |
952 | { "Right Input Inverting Mux", "IN3R", "IN3R" }, | |
953 | ||
954 | { "Left Input Mode Mux", "Single-Ended", "Left Input Inverting Mux" }, | |
955 | { "Left Input Mode Mux", "Differential Line", | |
956 | "Left Input Mux" }, | |
957 | { "Left Input Mode Mux", "Differential Line", | |
958 | "Left Input Inverting Mux" }, | |
959 | { "Left Input Mode Mux", "Differential Mic", | |
960 | "Left Input Mux" }, | |
961 | { "Left Input Mode Mux", "Differential Mic", | |
962 | "Left Input Inverting Mux" }, | |
963 | ||
964 | { "Right Input Mode Mux", "Single-Ended", | |
965 | "Right Input Inverting Mux" }, | |
966 | { "Right Input Mode Mux", "Differential Line", | |
967 | "Right Input Mux" }, | |
968 | { "Right Input Mode Mux", "Differential Line", | |
969 | "Right Input Inverting Mux" }, | |
970 | { "Right Input Mode Mux", "Differential Mic", | |
971 | "Right Input Mux" }, | |
972 | { "Right Input Mode Mux", "Differential Mic", | |
973 | "Right Input Inverting Mux" }, | |
974 | ||
975 | { "Left Input PGA", NULL, "Left Input Mode Mux" }, | |
976 | { "Right Input PGA", NULL, "Right Input Mode Mux" }, | |
977 | ||
97945c46 SW |
978 | { "Left ADC Input", "ADC", "Left Input PGA" }, |
979 | { "Left ADC Input", "DMIC", "DMICDAT" }, | |
980 | { "Right ADC Input", "ADC", "Right Input PGA" }, | |
981 | { "Right ADC Input", "DMIC", "DMICDAT" }, | |
982 | ||
1e113bf9 MB |
983 | { "Left Capture Mux", "Left", "ADCL" }, |
984 | { "Left Capture Mux", "Right", "ADCR" }, | |
985 | ||
986 | { "Right Capture Mux", "Left", "ADCL" }, | |
987 | { "Right Capture Mux", "Right", "ADCR" }, | |
988 | ||
989 | { "AIFTXL", NULL, "Left Capture Mux" }, | |
990 | { "AIFTXR", NULL, "Right Capture Mux" }, | |
991 | ||
97945c46 | 992 | { "ADCL", NULL, "Left ADC Input" }, |
c2aef4ff | 993 | { "ADCL", NULL, "CLK_DSP" }, |
97945c46 | 994 | { "ADCR", NULL, "Right ADC Input" }, |
c2aef4ff MB |
995 | { "ADCR", NULL, "CLK_DSP" }, |
996 | ||
1e113bf9 MB |
997 | { "Left Playback Mux", "Left", "AIFRXL" }, |
998 | { "Left Playback Mux", "Right", "AIFRXR" }, | |
999 | ||
1000 | { "Right Playback Mux", "Left", "AIFRXL" }, | |
1001 | { "Right Playback Mux", "Right", "AIFRXR" }, | |
1002 | ||
291ce18c MB |
1003 | { "DACL Sidetone", "Left", "ADCL" }, |
1004 | { "DACL Sidetone", "Right", "ADCR" }, | |
1005 | { "DACR Sidetone", "Left", "ADCL" }, | |
1006 | { "DACR Sidetone", "Right", "ADCR" }, | |
1007 | ||
1e113bf9 | 1008 | { "DACL", NULL, "Left Playback Mux" }, |
291ce18c | 1009 | { "DACL", NULL, "DACL Sidetone" }, |
c2aef4ff | 1010 | { "DACL", NULL, "CLK_DSP" }, |
1e113bf9 MB |
1011 | |
1012 | { "DACR", NULL, "Right Playback Mux" }, | |
291ce18c | 1013 | { "DACR", NULL, "DACR Sidetone" }, |
c2aef4ff | 1014 | { "DACR", NULL, "CLK_DSP" }, |
f1c0a02f MB |
1015 | |
1016 | { "Left Output Mixer", "Left Bypass Switch", "Left Input PGA" }, | |
1017 | { "Left Output Mixer", "Right Bypass Switch", "Right Input PGA" }, | |
1018 | { "Left Output Mixer", "DACL Switch", "DACL" }, | |
1019 | { "Left Output Mixer", "DACR Switch", "DACR" }, | |
1020 | ||
1021 | { "Right Output Mixer", "Left Bypass Switch", "Left Input PGA" }, | |
1022 | { "Right Output Mixer", "Right Bypass Switch", "Right Input PGA" }, | |
1023 | { "Right Output Mixer", "DACL Switch", "DACL" }, | |
1024 | { "Right Output Mixer", "DACR Switch", "DACR" }, | |
1025 | ||
1026 | { "Left Speaker Mixer", "Left Bypass Switch", "Left Input PGA" }, | |
1027 | { "Left Speaker Mixer", "Right Bypass Switch", "Right Input PGA" }, | |
1028 | { "Left Speaker Mixer", "DACL Switch", "DACL" }, | |
1029 | { "Left Speaker Mixer", "DACR Switch", "DACR" }, | |
1030 | ||
1031 | { "Right Speaker Mixer", "Left Bypass Switch", "Left Input PGA" }, | |
1032 | { "Right Speaker Mixer", "Right Bypass Switch", "Right Input PGA" }, | |
1033 | { "Right Speaker Mixer", "DACL Switch", "DACL" }, | |
1034 | { "Right Speaker Mixer", "DACR Switch", "DACR" }, | |
1035 | ||
1036 | { "Left Line Output PGA", NULL, "Left Output Mixer" }, | |
1037 | { "Right Line Output PGA", NULL, "Right Output Mixer" }, | |
1038 | ||
1039 | { "Left Headphone Output PGA", NULL, "Left Output Mixer" }, | |
1040 | { "Right Headphone Output PGA", NULL, "Right Output Mixer" }, | |
1041 | ||
1042 | { "Left Speaker PGA", NULL, "Left Speaker Mixer" }, | |
1043 | { "Right Speaker PGA", NULL, "Right Speaker Mixer" }, | |
1044 | ||
1b877cb5 DL |
1045 | { "HPL_ENA", NULL, "Left Headphone Output PGA" }, |
1046 | { "HPR_ENA", NULL, "Right Headphone Output PGA" }, | |
1047 | { "HPL_ENA_DLY", NULL, "HPL_ENA" }, | |
1048 | { "HPR_ENA_DLY", NULL, "HPR_ENA" }, | |
1049 | { "LINEOUTL_ENA", NULL, "Left Line Output PGA" }, | |
1050 | { "LINEOUTR_ENA", NULL, "Right Line Output PGA" }, | |
1051 | { "LINEOUTL_ENA_DLY", NULL, "LINEOUTL_ENA" }, | |
1052 | { "LINEOUTR_ENA_DLY", NULL, "LINEOUTR_ENA" }, | |
13a9983e | 1053 | |
c5b6a9fe MB |
1054 | { "HPL_DCS", NULL, "DCS Master" }, |
1055 | { "HPR_DCS", NULL, "DCS Master" }, | |
1056 | { "LINEOUTL_DCS", NULL, "DCS Master" }, | |
1057 | { "LINEOUTR_DCS", NULL, "DCS Master" }, | |
1058 | ||
13a9983e MB |
1059 | { "HPL_DCS", NULL, "HPL_ENA_DLY" }, |
1060 | { "HPR_DCS", NULL, "HPR_ENA_DLY" }, | |
1061 | { "LINEOUTL_DCS", NULL, "LINEOUTL_ENA_DLY" }, | |
1062 | { "LINEOUTR_DCS", NULL, "LINEOUTR_ENA_DLY" }, | |
1063 | ||
1064 | { "HPL_ENA_OUTP", NULL, "HPL_DCS" }, | |
1065 | { "HPR_ENA_OUTP", NULL, "HPR_DCS" }, | |
1066 | { "LINEOUTL_ENA_OUTP", NULL, "LINEOUTL_DCS" }, | |
1067 | { "LINEOUTR_ENA_OUTP", NULL, "LINEOUTR_DCS" }, | |
1068 | ||
1069 | { "HPL_RMV_SHORT", NULL, "HPL_ENA_OUTP" }, | |
1070 | { "HPR_RMV_SHORT", NULL, "HPR_ENA_OUTP" }, | |
1071 | { "LINEOUTL_RMV_SHORT", NULL, "LINEOUTL_ENA_OUTP" }, | |
1072 | { "LINEOUTR_RMV_SHORT", NULL, "LINEOUTR_ENA_OUTP" }, | |
1073 | ||
1074 | { "HPOUTL", NULL, "HPL_RMV_SHORT" }, | |
1075 | { "HPOUTR", NULL, "HPR_RMV_SHORT" }, | |
1076 | { "LINEOUTL", NULL, "LINEOUTL_RMV_SHORT" }, | |
1077 | { "LINEOUTR", NULL, "LINEOUTR_RMV_SHORT" }, | |
f1c0a02f MB |
1078 | |
1079 | { "LOP", NULL, "Left Speaker PGA" }, | |
1080 | { "LON", NULL, "Left Speaker PGA" }, | |
1081 | ||
1082 | { "ROP", NULL, "Right Speaker PGA" }, | |
1083 | { "RON", NULL, "Right Speaker PGA" }, | |
42768a12 MB |
1084 | |
1085 | { "Left Headphone Output PGA", NULL, "Charge Pump" }, | |
1086 | { "Right Headphone Output PGA", NULL, "Charge Pump" }, | |
1087 | { "Left Line Output PGA", NULL, "Charge Pump" }, | |
1088 | { "Right Line Output PGA", NULL, "Charge Pump" }, | |
f1c0a02f MB |
1089 | }; |
1090 | ||
f1c0a02f MB |
1091 | static int wm8903_set_bias_level(struct snd_soc_codec *codec, |
1092 | enum snd_soc_bias_level level) | |
1093 | { | |
f1c0a02f MB |
1094 | switch (level) { |
1095 | case SND_SOC_BIAS_ON: | |
66daaa59 | 1096 | break; |
22f226dd | 1097 | |
f1c0a02f | 1098 | case SND_SOC_BIAS_PREPARE: |
66daaa59 MB |
1099 | snd_soc_update_bits(codec, WM8903_VMID_CONTROL_0, |
1100 | WM8903_VMID_RES_MASK, | |
1101 | WM8903_VMID_RES_50K); | |
f1c0a02f MB |
1102 | break; |
1103 | ||
1104 | case SND_SOC_BIAS_STANDBY: | |
ce6120cc | 1105 | if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) { |
22f226dd MB |
1106 | snd_soc_update_bits(codec, WM8903_BIAS_CONTROL_0, |
1107 | WM8903_POBCTRL | WM8903_ISEL_MASK | | |
1108 | WM8903_STARTUP_BIAS_ENA | | |
1109 | WM8903_BIAS_ENA, | |
1110 | WM8903_POBCTRL | | |
1111 | (2 << WM8903_ISEL_SHIFT) | | |
1112 | WM8903_STARTUP_BIAS_ENA); | |
1113 | ||
1114 | snd_soc_update_bits(codec, | |
1115 | WM8903_ANALOGUE_SPK_OUTPUT_CONTROL_0, | |
1116 | WM8903_SPK_DISCHARGE, | |
1117 | WM8903_SPK_DISCHARGE); | |
1118 | ||
1119 | msleep(33); | |
1120 | ||
1121 | snd_soc_update_bits(codec, WM8903_POWER_MANAGEMENT_5, | |
1122 | WM8903_SPKL_ENA | WM8903_SPKR_ENA, | |
1123 | WM8903_SPKL_ENA | WM8903_SPKR_ENA); | |
1124 | ||
1125 | snd_soc_update_bits(codec, | |
1126 | WM8903_ANALOGUE_SPK_OUTPUT_CONTROL_0, | |
1127 | WM8903_SPK_DISCHARGE, 0); | |
1128 | ||
1129 | snd_soc_update_bits(codec, WM8903_VMID_CONTROL_0, | |
1130 | WM8903_VMID_TIE_ENA | | |
1131 | WM8903_BUFIO_ENA | | |
1132 | WM8903_VMID_IO_ENA | | |
1133 | WM8903_VMID_SOFT_MASK | | |
1134 | WM8903_VMID_RES_MASK | | |
1135 | WM8903_VMID_BUF_ENA, | |
1136 | WM8903_VMID_TIE_ENA | | |
1137 | WM8903_BUFIO_ENA | | |
1138 | WM8903_VMID_IO_ENA | | |
1139 | (2 << WM8903_VMID_SOFT_SHIFT) | | |
1140 | WM8903_VMID_RES_250K | | |
1141 | WM8903_VMID_BUF_ENA); | |
1142 | ||
1143 | msleep(129); | |
1144 | ||
1145 | snd_soc_update_bits(codec, WM8903_POWER_MANAGEMENT_5, | |
1146 | WM8903_SPKL_ENA | WM8903_SPKR_ENA, | |
1147 | 0); | |
1148 | ||
1149 | snd_soc_update_bits(codec, WM8903_VMID_CONTROL_0, | |
1150 | WM8903_VMID_SOFT_MASK, 0); | |
1151 | ||
1152 | snd_soc_update_bits(codec, WM8903_VMID_CONTROL_0, | |
1153 | WM8903_VMID_RES_MASK, | |
1154 | WM8903_VMID_RES_50K); | |
1155 | ||
1156 | snd_soc_update_bits(codec, WM8903_BIAS_CONTROL_0, | |
1157 | WM8903_BIAS_ENA | WM8903_POBCTRL, | |
1158 | WM8903_BIAS_ENA); | |
f1c0a02f | 1159 | |
f1c0a02f MB |
1160 | /* By default no bypass paths are enabled so |
1161 | * enable Class W support. | |
1162 | */ | |
f0fba2ad | 1163 | dev_dbg(codec->dev, "Enabling Class W\n"); |
524d7692 MB |
1164 | snd_soc_update_bits(codec, WM8903_CLASS_W_0, |
1165 | WM8903_CP_DYN_FREQ | | |
1166 | WM8903_CP_DYN_V, | |
1167 | WM8903_CP_DYN_FREQ | | |
1168 | WM8903_CP_DYN_V); | |
f1c0a02f MB |
1169 | } |
1170 | ||
66daaa59 MB |
1171 | snd_soc_update_bits(codec, WM8903_VMID_CONTROL_0, |
1172 | WM8903_VMID_RES_MASK, | |
1173 | WM8903_VMID_RES_250K); | |
f1c0a02f MB |
1174 | break; |
1175 | ||
1176 | case SND_SOC_BIAS_OFF: | |
b4d06f45 MB |
1177 | snd_soc_update_bits(codec, WM8903_BIAS_CONTROL_0, |
1178 | WM8903_BIAS_ENA, 0); | |
1179 | ||
1180 | snd_soc_update_bits(codec, WM8903_VMID_CONTROL_0, | |
1181 | WM8903_VMID_SOFT_MASK, | |
1182 | 2 << WM8903_VMID_SOFT_SHIFT); | |
1183 | ||
1184 | snd_soc_update_bits(codec, WM8903_VMID_CONTROL_0, | |
1185 | WM8903_VMID_BUF_ENA, 0); | |
1186 | ||
1187 | msleep(290); | |
1188 | ||
1189 | snd_soc_update_bits(codec, WM8903_VMID_CONTROL_0, | |
1190 | WM8903_VMID_TIE_ENA | WM8903_BUFIO_ENA | | |
1191 | WM8903_VMID_IO_ENA | WM8903_VMID_RES_MASK | | |
1192 | WM8903_VMID_SOFT_MASK | | |
1193 | WM8903_VMID_BUF_ENA, 0); | |
1194 | ||
1195 | snd_soc_update_bits(codec, WM8903_BIAS_CONTROL_0, | |
1196 | WM8903_STARTUP_BIAS_ENA, 0); | |
f1c0a02f MB |
1197 | break; |
1198 | } | |
1199 | ||
ce6120cc | 1200 | codec->dapm.bias_level = level; |
f1c0a02f MB |
1201 | |
1202 | return 0; | |
1203 | } | |
1204 | ||
1205 | static int wm8903_set_dai_sysclk(struct snd_soc_dai *codec_dai, | |
1206 | int clk_id, unsigned int freq, int dir) | |
1207 | { | |
1208 | struct snd_soc_codec *codec = codec_dai->codec; | |
b2c812e2 | 1209 | struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec); |
f1c0a02f MB |
1210 | |
1211 | wm8903->sysclk = freq; | |
1212 | ||
1213 | return 0; | |
1214 | } | |
1215 | ||
1216 | static int wm8903_set_dai_fmt(struct snd_soc_dai *codec_dai, | |
1217 | unsigned int fmt) | |
1218 | { | |
1219 | struct snd_soc_codec *codec = codec_dai->codec; | |
8d50e447 | 1220 | u16 aif1 = snd_soc_read(codec, WM8903_AUDIO_INTERFACE_1); |
f1c0a02f MB |
1221 | |
1222 | aif1 &= ~(WM8903_LRCLK_DIR | WM8903_BCLK_DIR | WM8903_AIF_FMT_MASK | | |
1223 | WM8903_AIF_LRCLK_INV | WM8903_AIF_BCLK_INV); | |
1224 | ||
1225 | switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { | |
1226 | case SND_SOC_DAIFMT_CBS_CFS: | |
1227 | break; | |
1228 | case SND_SOC_DAIFMT_CBS_CFM: | |
1229 | aif1 |= WM8903_LRCLK_DIR; | |
1230 | break; | |
1231 | case SND_SOC_DAIFMT_CBM_CFM: | |
1232 | aif1 |= WM8903_LRCLK_DIR | WM8903_BCLK_DIR; | |
1233 | break; | |
1234 | case SND_SOC_DAIFMT_CBM_CFS: | |
1235 | aif1 |= WM8903_BCLK_DIR; | |
1236 | break; | |
1237 | default: | |
1238 | return -EINVAL; | |
1239 | } | |
1240 | ||
1241 | switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { | |
1242 | case SND_SOC_DAIFMT_DSP_A: | |
1243 | aif1 |= 0x3; | |
1244 | break; | |
1245 | case SND_SOC_DAIFMT_DSP_B: | |
1246 | aif1 |= 0x3 | WM8903_AIF_LRCLK_INV; | |
1247 | break; | |
1248 | case SND_SOC_DAIFMT_I2S: | |
1249 | aif1 |= 0x2; | |
1250 | break; | |
1251 | case SND_SOC_DAIFMT_RIGHT_J: | |
1252 | aif1 |= 0x1; | |
1253 | break; | |
1254 | case SND_SOC_DAIFMT_LEFT_J: | |
1255 | break; | |
1256 | default: | |
1257 | return -EINVAL; | |
1258 | } | |
1259 | ||
1260 | /* Clock inversion */ | |
1261 | switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { | |
1262 | case SND_SOC_DAIFMT_DSP_A: | |
1263 | case SND_SOC_DAIFMT_DSP_B: | |
1264 | /* frame inversion not valid for DSP modes */ | |
1265 | switch (fmt & SND_SOC_DAIFMT_INV_MASK) { | |
1266 | case SND_SOC_DAIFMT_NB_NF: | |
1267 | break; | |
1268 | case SND_SOC_DAIFMT_IB_NF: | |
1269 | aif1 |= WM8903_AIF_BCLK_INV; | |
1270 | break; | |
1271 | default: | |
1272 | return -EINVAL; | |
1273 | } | |
1274 | break; | |
1275 | case SND_SOC_DAIFMT_I2S: | |
1276 | case SND_SOC_DAIFMT_RIGHT_J: | |
1277 | case SND_SOC_DAIFMT_LEFT_J: | |
1278 | switch (fmt & SND_SOC_DAIFMT_INV_MASK) { | |
1279 | case SND_SOC_DAIFMT_NB_NF: | |
1280 | break; | |
1281 | case SND_SOC_DAIFMT_IB_IF: | |
1282 | aif1 |= WM8903_AIF_BCLK_INV | WM8903_AIF_LRCLK_INV; | |
1283 | break; | |
1284 | case SND_SOC_DAIFMT_IB_NF: | |
1285 | aif1 |= WM8903_AIF_BCLK_INV; | |
1286 | break; | |
1287 | case SND_SOC_DAIFMT_NB_IF: | |
1288 | aif1 |= WM8903_AIF_LRCLK_INV; | |
1289 | break; | |
1290 | default: | |
1291 | return -EINVAL; | |
1292 | } | |
1293 | break; | |
1294 | default: | |
1295 | return -EINVAL; | |
1296 | } | |
1297 | ||
8d50e447 | 1298 | snd_soc_write(codec, WM8903_AUDIO_INTERFACE_1, aif1); |
f1c0a02f MB |
1299 | |
1300 | return 0; | |
1301 | } | |
1302 | ||
1303 | static int wm8903_digital_mute(struct snd_soc_dai *codec_dai, int mute) | |
1304 | { | |
1305 | struct snd_soc_codec *codec = codec_dai->codec; | |
1306 | u16 reg; | |
1307 | ||
8d50e447 | 1308 | reg = snd_soc_read(codec, WM8903_DAC_DIGITAL_1); |
f1c0a02f MB |
1309 | |
1310 | if (mute) | |
1311 | reg |= WM8903_DAC_MUTE; | |
1312 | else | |
1313 | reg &= ~WM8903_DAC_MUTE; | |
1314 | ||
8d50e447 | 1315 | snd_soc_write(codec, WM8903_DAC_DIGITAL_1, reg); |
f1c0a02f MB |
1316 | |
1317 | return 0; | |
1318 | } | |
1319 | ||
1320 | /* Lookup table for CLK_SYS/fs ratio. 256fs or more is recommended | |
1321 | * for optimal performance so we list the lower rates first and match | |
1322 | * on the last match we find. */ | |
1323 | static struct { | |
1324 | int div; | |
1325 | int rate; | |
1326 | int mode; | |
1327 | int mclk_div; | |
1328 | } clk_sys_ratios[] = { | |
1329 | { 64, 0x0, 0x0, 1 }, | |
1330 | { 68, 0x0, 0x1, 1 }, | |
1331 | { 125, 0x0, 0x2, 1 }, | |
1332 | { 128, 0x1, 0x0, 1 }, | |
1333 | { 136, 0x1, 0x1, 1 }, | |
1334 | { 192, 0x2, 0x0, 1 }, | |
1335 | { 204, 0x2, 0x1, 1 }, | |
1336 | ||
1337 | { 64, 0x0, 0x0, 2 }, | |
1338 | { 68, 0x0, 0x1, 2 }, | |
1339 | { 125, 0x0, 0x2, 2 }, | |
1340 | { 128, 0x1, 0x0, 2 }, | |
1341 | { 136, 0x1, 0x1, 2 }, | |
1342 | { 192, 0x2, 0x0, 2 }, | |
1343 | { 204, 0x2, 0x1, 2 }, | |
1344 | ||
1345 | { 250, 0x2, 0x2, 1 }, | |
1346 | { 256, 0x3, 0x0, 1 }, | |
1347 | { 272, 0x3, 0x1, 1 }, | |
1348 | { 384, 0x4, 0x0, 1 }, | |
1349 | { 408, 0x4, 0x1, 1 }, | |
1350 | { 375, 0x4, 0x2, 1 }, | |
1351 | { 512, 0x5, 0x0, 1 }, | |
1352 | { 544, 0x5, 0x1, 1 }, | |
1353 | { 500, 0x5, 0x2, 1 }, | |
1354 | { 768, 0x6, 0x0, 1 }, | |
1355 | { 816, 0x6, 0x1, 1 }, | |
1356 | { 750, 0x6, 0x2, 1 }, | |
1357 | { 1024, 0x7, 0x0, 1 }, | |
1358 | { 1088, 0x7, 0x1, 1 }, | |
1359 | { 1000, 0x7, 0x2, 1 }, | |
1360 | { 1408, 0x8, 0x0, 1 }, | |
1361 | { 1496, 0x8, 0x1, 1 }, | |
1362 | { 1536, 0x9, 0x0, 1 }, | |
1363 | { 1632, 0x9, 0x1, 1 }, | |
1364 | { 1500, 0x9, 0x2, 1 }, | |
1365 | ||
1366 | { 250, 0x2, 0x2, 2 }, | |
1367 | { 256, 0x3, 0x0, 2 }, | |
1368 | { 272, 0x3, 0x1, 2 }, | |
1369 | { 384, 0x4, 0x0, 2 }, | |
1370 | { 408, 0x4, 0x1, 2 }, | |
1371 | { 375, 0x4, 0x2, 2 }, | |
1372 | { 512, 0x5, 0x0, 2 }, | |
1373 | { 544, 0x5, 0x1, 2 }, | |
1374 | { 500, 0x5, 0x2, 2 }, | |
1375 | { 768, 0x6, 0x0, 2 }, | |
1376 | { 816, 0x6, 0x1, 2 }, | |
1377 | { 750, 0x6, 0x2, 2 }, | |
1378 | { 1024, 0x7, 0x0, 2 }, | |
1379 | { 1088, 0x7, 0x1, 2 }, | |
1380 | { 1000, 0x7, 0x2, 2 }, | |
1381 | { 1408, 0x8, 0x0, 2 }, | |
1382 | { 1496, 0x8, 0x1, 2 }, | |
1383 | { 1536, 0x9, 0x0, 2 }, | |
1384 | { 1632, 0x9, 0x1, 2 }, | |
1385 | { 1500, 0x9, 0x2, 2 }, | |
1386 | }; | |
1387 | ||
1388 | /* CLK_SYS/BCLK ratios - multiplied by 10 due to .5s */ | |
1389 | static struct { | |
1390 | int ratio; | |
1391 | int div; | |
1392 | } bclk_divs[] = { | |
1393 | { 10, 0 }, | |
f1c0a02f MB |
1394 | { 20, 2 }, |
1395 | { 30, 3 }, | |
1396 | { 40, 4 }, | |
1397 | { 50, 5 }, | |
f1c0a02f MB |
1398 | { 60, 7 }, |
1399 | { 80, 8 }, | |
1400 | { 100, 9 }, | |
f1c0a02f MB |
1401 | { 120, 11 }, |
1402 | { 160, 12 }, | |
1403 | { 200, 13 }, | |
1404 | { 220, 14 }, | |
1405 | { 240, 15 }, | |
f1c0a02f MB |
1406 | { 300, 17 }, |
1407 | { 320, 18 }, | |
1408 | { 440, 19 }, | |
1409 | { 480, 20 }, | |
1410 | }; | |
1411 | ||
1412 | /* Sample rates for DSP */ | |
1413 | static struct { | |
1414 | int rate; | |
1415 | int value; | |
1416 | } sample_rates[] = { | |
1417 | { 8000, 0 }, | |
1418 | { 11025, 1 }, | |
1419 | { 12000, 2 }, | |
1420 | { 16000, 3 }, | |
1421 | { 22050, 4 }, | |
1422 | { 24000, 5 }, | |
1423 | { 32000, 6 }, | |
1424 | { 44100, 7 }, | |
1425 | { 48000, 8 }, | |
1426 | { 88200, 9 }, | |
1427 | { 96000, 10 }, | |
1428 | { 0, 0 }, | |
1429 | }; | |
1430 | ||
f1c0a02f | 1431 | static int wm8903_hw_params(struct snd_pcm_substream *substream, |
dee89c4d MB |
1432 | struct snd_pcm_hw_params *params, |
1433 | struct snd_soc_dai *dai) | |
f1c0a02f MB |
1434 | { |
1435 | struct snd_soc_pcm_runtime *rtd = substream->private_data; | |
f0fba2ad | 1436 | struct snd_soc_codec *codec =rtd->codec; |
b2c812e2 | 1437 | struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec); |
f1c0a02f MB |
1438 | int fs = params_rate(params); |
1439 | int bclk; | |
1440 | int bclk_div; | |
1441 | int i; | |
1442 | int dsp_config; | |
1443 | int clk_config; | |
1444 | int best_val; | |
1445 | int cur_val; | |
1446 | int clk_sys; | |
1447 | ||
8d50e447 MB |
1448 | u16 aif1 = snd_soc_read(codec, WM8903_AUDIO_INTERFACE_1); |
1449 | u16 aif2 = snd_soc_read(codec, WM8903_AUDIO_INTERFACE_2); | |
1450 | u16 aif3 = snd_soc_read(codec, WM8903_AUDIO_INTERFACE_3); | |
1451 | u16 clock0 = snd_soc_read(codec, WM8903_CLOCK_RATES_0); | |
1452 | u16 clock1 = snd_soc_read(codec, WM8903_CLOCK_RATES_1); | |
1453 | u16 dac_digital1 = snd_soc_read(codec, WM8903_DAC_DIGITAL_1); | |
f1c0a02f | 1454 | |
9e79261f MB |
1455 | /* Enable sloping stopband filter for low sample rates */ |
1456 | if (fs <= 24000) | |
1457 | dac_digital1 |= WM8903_DAC_SB_FILT; | |
1458 | else | |
1459 | dac_digital1 &= ~WM8903_DAC_SB_FILT; | |
1460 | ||
f1c0a02f MB |
1461 | /* Configure sample rate logic for DSP - choose nearest rate */ |
1462 | dsp_config = 0; | |
1463 | best_val = abs(sample_rates[dsp_config].rate - fs); | |
1464 | for (i = 1; i < ARRAY_SIZE(sample_rates); i++) { | |
1465 | cur_val = abs(sample_rates[i].rate - fs); | |
1466 | if (cur_val <= best_val) { | |
1467 | dsp_config = i; | |
1468 | best_val = cur_val; | |
1469 | } | |
1470 | } | |
1471 | ||
f0fba2ad | 1472 | dev_dbg(codec->dev, "DSP fs = %dHz\n", sample_rates[dsp_config].rate); |
f1c0a02f MB |
1473 | clock1 &= ~WM8903_SAMPLE_RATE_MASK; |
1474 | clock1 |= sample_rates[dsp_config].value; | |
1475 | ||
1476 | aif1 &= ~WM8903_AIF_WL_MASK; | |
1477 | bclk = 2 * fs; | |
1478 | switch (params_format(params)) { | |
1479 | case SNDRV_PCM_FORMAT_S16_LE: | |
1480 | bclk *= 16; | |
1481 | break; | |
1482 | case SNDRV_PCM_FORMAT_S20_3LE: | |
1483 | bclk *= 20; | |
1484 | aif1 |= 0x4; | |
1485 | break; | |
1486 | case SNDRV_PCM_FORMAT_S24_LE: | |
1487 | bclk *= 24; | |
1488 | aif1 |= 0x8; | |
1489 | break; | |
1490 | case SNDRV_PCM_FORMAT_S32_LE: | |
1491 | bclk *= 32; | |
1492 | aif1 |= 0xc; | |
1493 | break; | |
1494 | default: | |
1495 | return -EINVAL; | |
1496 | } | |
1497 | ||
f0fba2ad | 1498 | dev_dbg(codec->dev, "MCLK = %dHz, target sample rate = %dHz\n", |
f1c0a02f MB |
1499 | wm8903->sysclk, fs); |
1500 | ||
1501 | /* We may not have an MCLK which allows us to generate exactly | |
1502 | * the clock we want, particularly with USB derived inputs, so | |
1503 | * approximate. | |
1504 | */ | |
1505 | clk_config = 0; | |
1506 | best_val = abs((wm8903->sysclk / | |
1507 | (clk_sys_ratios[0].mclk_div * | |
1508 | clk_sys_ratios[0].div)) - fs); | |
1509 | for (i = 1; i < ARRAY_SIZE(clk_sys_ratios); i++) { | |
1510 | cur_val = abs((wm8903->sysclk / | |
1511 | (clk_sys_ratios[i].mclk_div * | |
1512 | clk_sys_ratios[i].div)) - fs); | |
1513 | ||
1514 | if (cur_val <= best_val) { | |
1515 | clk_config = i; | |
1516 | best_val = cur_val; | |
1517 | } | |
1518 | } | |
1519 | ||
1520 | if (clk_sys_ratios[clk_config].mclk_div == 2) { | |
1521 | clock0 |= WM8903_MCLKDIV2; | |
1522 | clk_sys = wm8903->sysclk / 2; | |
1523 | } else { | |
1524 | clock0 &= ~WM8903_MCLKDIV2; | |
1525 | clk_sys = wm8903->sysclk; | |
1526 | } | |
1527 | ||
1528 | clock1 &= ~(WM8903_CLK_SYS_RATE_MASK | | |
1529 | WM8903_CLK_SYS_MODE_MASK); | |
1530 | clock1 |= clk_sys_ratios[clk_config].rate << WM8903_CLK_SYS_RATE_SHIFT; | |
1531 | clock1 |= clk_sys_ratios[clk_config].mode << WM8903_CLK_SYS_MODE_SHIFT; | |
1532 | ||
f0fba2ad | 1533 | dev_dbg(codec->dev, "CLK_SYS_RATE=%x, CLK_SYS_MODE=%x div=%d\n", |
f1c0a02f MB |
1534 | clk_sys_ratios[clk_config].rate, |
1535 | clk_sys_ratios[clk_config].mode, | |
1536 | clk_sys_ratios[clk_config].div); | |
1537 | ||
f0fba2ad | 1538 | dev_dbg(codec->dev, "Actual CLK_SYS = %dHz\n", clk_sys); |
f1c0a02f MB |
1539 | |
1540 | /* We may not get quite the right frequency if using | |
1541 | * approximate clocks so look for the closest match that is | |
1542 | * higher than the target (we need to ensure that there enough | |
1543 | * BCLKs to clock out the samples). | |
1544 | */ | |
1545 | bclk_div = 0; | |
1546 | best_val = ((clk_sys * 10) / bclk_divs[0].ratio) - bclk; | |
1547 | i = 1; | |
1548 | while (i < ARRAY_SIZE(bclk_divs)) { | |
1549 | cur_val = ((clk_sys * 10) / bclk_divs[i].ratio) - bclk; | |
1550 | if (cur_val < 0) /* BCLK table is sorted */ | |
1551 | break; | |
1552 | bclk_div = i; | |
1553 | best_val = cur_val; | |
1554 | i++; | |
1555 | } | |
1556 | ||
1557 | aif2 &= ~WM8903_BCLK_DIV_MASK; | |
1558 | aif3 &= ~WM8903_LRCLK_RATE_MASK; | |
1559 | ||
f0fba2ad | 1560 | dev_dbg(codec->dev, "BCLK ratio %d for %dHz - actual BCLK = %dHz\n", |
f1c0a02f MB |
1561 | bclk_divs[bclk_div].ratio / 10, bclk, |
1562 | (clk_sys * 10) / bclk_divs[bclk_div].ratio); | |
1563 | ||
1564 | aif2 |= bclk_divs[bclk_div].div; | |
1565 | aif3 |= bclk / fs; | |
1566 | ||
69fff9bb MB |
1567 | wm8903->fs = params_rate(params); |
1568 | wm8903_set_deemph(codec); | |
1569 | ||
8d50e447 MB |
1570 | snd_soc_write(codec, WM8903_CLOCK_RATES_0, clock0); |
1571 | snd_soc_write(codec, WM8903_CLOCK_RATES_1, clock1); | |
1572 | snd_soc_write(codec, WM8903_AUDIO_INTERFACE_1, aif1); | |
1573 | snd_soc_write(codec, WM8903_AUDIO_INTERFACE_2, aif2); | |
1574 | snd_soc_write(codec, WM8903_AUDIO_INTERFACE_3, aif3); | |
1575 | snd_soc_write(codec, WM8903_DAC_DIGITAL_1, dac_digital1); | |
f1c0a02f MB |
1576 | |
1577 | return 0; | |
1578 | } | |
1579 | ||
7245387e MB |
1580 | /** |
1581 | * wm8903_mic_detect - Enable microphone detection via the WM8903 IRQ | |
1582 | * | |
1583 | * @codec: WM8903 codec | |
1584 | * @jack: jack to report detection events on | |
1585 | * @det: value to report for presence detection | |
1586 | * @shrt: value to report for short detection | |
1587 | * | |
1588 | * Enable microphone detection via IRQ on the WM8903. If GPIOs are | |
1589 | * being used to bring out signals to the processor then only platform | |
1590 | * data configuration is needed for WM8903 and processor GPIOs should | |
1591 | * be configured using snd_soc_jack_add_gpios() instead. | |
1592 | * | |
1593 | * The current threasholds for detection should be configured using | |
1594 | * micdet_cfg in the platform data. Using this function will force on | |
1595 | * the microphone bias for the device. | |
1596 | */ | |
1597 | int wm8903_mic_detect(struct snd_soc_codec *codec, struct snd_soc_jack *jack, | |
1598 | int det, int shrt) | |
1599 | { | |
b2c812e2 | 1600 | struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec); |
69266866 | 1601 | int irq_mask = WM8903_MICDET_EINT | WM8903_MICSHRT_EINT; |
7245387e MB |
1602 | |
1603 | dev_dbg(codec->dev, "Enabling microphone detection: %x %x\n", | |
1604 | det, shrt); | |
1605 | ||
1606 | /* Store the configuration */ | |
1607 | wm8903->mic_jack = jack; | |
1608 | wm8903->mic_det = det; | |
1609 | wm8903->mic_short = shrt; | |
1610 | ||
1611 | /* Enable interrupts we've got a report configured for */ | |
1612 | if (det) | |
1613 | irq_mask &= ~WM8903_MICDET_EINT; | |
1614 | if (shrt) | |
1615 | irq_mask &= ~WM8903_MICSHRT_EINT; | |
1616 | ||
1617 | snd_soc_update_bits(codec, WM8903_INTERRUPT_STATUS_1_MASK, | |
1618 | WM8903_MICDET_EINT | WM8903_MICSHRT_EINT, | |
1619 | irq_mask); | |
1620 | ||
3088e3b4 | 1621 | if (det || shrt) { |
69266866 MB |
1622 | /* Enable mic detection, this may not have been set through |
1623 | * platform data (eg, if the defaults are OK). */ | |
1624 | snd_soc_update_bits(codec, WM8903_WRITE_SEQUENCER_0, | |
1625 | WM8903_WSEQ_ENA, WM8903_WSEQ_ENA); | |
1626 | snd_soc_update_bits(codec, WM8903_MIC_BIAS_CONTROL_0, | |
1627 | WM8903_MICDET_ENA, WM8903_MICDET_ENA); | |
1628 | } else { | |
1629 | snd_soc_update_bits(codec, WM8903_MIC_BIAS_CONTROL_0, | |
1630 | WM8903_MICDET_ENA, 0); | |
1631 | } | |
7245387e MB |
1632 | |
1633 | return 0; | |
1634 | } | |
1635 | EXPORT_SYMBOL_GPL(wm8903_mic_detect); | |
1636 | ||
8abd16a6 MB |
1637 | static irqreturn_t wm8903_irq(int irq, void *data) |
1638 | { | |
f0fba2ad LG |
1639 | struct snd_soc_codec *codec = data; |
1640 | struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec); | |
7245387e MB |
1641 | int mic_report; |
1642 | int int_pol; | |
1643 | int int_val = 0; | |
1644 | int mask = ~snd_soc_read(codec, WM8903_INTERRUPT_STATUS_1_MASK); | |
8abd16a6 | 1645 | |
7245387e | 1646 | int_val = snd_soc_read(codec, WM8903_INTERRUPT_STATUS_1) & mask; |
8abd16a6 | 1647 | |
7245387e | 1648 | if (int_val & WM8903_WSEQ_BUSY_EINT) { |
b4d06f45 | 1649 | dev_warn(codec->dev, "Write sequencer done\n"); |
8abd16a6 MB |
1650 | } |
1651 | ||
7245387e MB |
1652 | /* |
1653 | * The rest is microphone jack detection. We need to manually | |
1654 | * invert the polarity of the interrupt after each event - to | |
1655 | * simplify the code keep track of the last state we reported | |
1656 | * and just invert the relevant bits in both the report and | |
1657 | * the polarity register. | |
1658 | */ | |
1659 | mic_report = wm8903->mic_last_report; | |
1660 | int_pol = snd_soc_read(codec, WM8903_INTERRUPT_POLARITY_1); | |
1661 | ||
1435b940 | 1662 | #ifndef CONFIG_SND_SOC_WM8903_MODULE |
2bbb5d66 MB |
1663 | if (int_val & (WM8903_MICSHRT_EINT | WM8903_MICDET_EINT)) |
1664 | trace_snd_soc_jack_irq(dev_name(codec->dev)); | |
1435b940 | 1665 | #endif |
2bbb5d66 | 1666 | |
7245387e MB |
1667 | if (int_val & WM8903_MICSHRT_EINT) { |
1668 | dev_dbg(codec->dev, "Microphone short (pol=%x)\n", int_pol); | |
1669 | ||
1670 | mic_report ^= wm8903->mic_short; | |
1671 | int_pol ^= WM8903_MICSHRT_INV; | |
1672 | } | |
1673 | ||
1674 | if (int_val & WM8903_MICDET_EINT) { | |
1675 | dev_dbg(codec->dev, "Microphone detect (pol=%x)\n", int_pol); | |
1676 | ||
1677 | mic_report ^= wm8903->mic_det; | |
1678 | int_pol ^= WM8903_MICDET_INV; | |
1679 | ||
1680 | msleep(wm8903->mic_delay); | |
1681 | } | |
1682 | ||
1683 | snd_soc_update_bits(codec, WM8903_INTERRUPT_POLARITY_1, | |
1684 | WM8903_MICSHRT_INV | WM8903_MICDET_INV, int_pol); | |
1685 | ||
1686 | snd_soc_jack_report(wm8903->mic_jack, mic_report, | |
1687 | wm8903->mic_short | wm8903->mic_det); | |
1688 | ||
1689 | wm8903->mic_last_report = mic_report; | |
1690 | ||
8abd16a6 MB |
1691 | return IRQ_HANDLED; |
1692 | } | |
1693 | ||
f1c0a02f MB |
1694 | #define WM8903_PLAYBACK_RATES (SNDRV_PCM_RATE_8000 |\ |
1695 | SNDRV_PCM_RATE_11025 | \ | |
1696 | SNDRV_PCM_RATE_16000 | \ | |
1697 | SNDRV_PCM_RATE_22050 | \ | |
1698 | SNDRV_PCM_RATE_32000 | \ | |
1699 | SNDRV_PCM_RATE_44100 | \ | |
1700 | SNDRV_PCM_RATE_48000 | \ | |
1701 | SNDRV_PCM_RATE_88200 | \ | |
1702 | SNDRV_PCM_RATE_96000) | |
1703 | ||
1704 | #define WM8903_CAPTURE_RATES (SNDRV_PCM_RATE_8000 |\ | |
1705 | SNDRV_PCM_RATE_11025 | \ | |
1706 | SNDRV_PCM_RATE_16000 | \ | |
1707 | SNDRV_PCM_RATE_22050 | \ | |
1708 | SNDRV_PCM_RATE_32000 | \ | |
1709 | SNDRV_PCM_RATE_44100 | \ | |
1710 | SNDRV_PCM_RATE_48000) | |
1711 | ||
1712 | #define WM8903_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\ | |
1713 | SNDRV_PCM_FMTBIT_S20_3LE |\ | |
1714 | SNDRV_PCM_FMTBIT_S24_LE) | |
1715 | ||
85e7652d | 1716 | static const struct snd_soc_dai_ops wm8903_dai_ops = { |
6335d055 EM |
1717 | .hw_params = wm8903_hw_params, |
1718 | .digital_mute = wm8903_digital_mute, | |
1719 | .set_fmt = wm8903_set_dai_fmt, | |
1720 | .set_sysclk = wm8903_set_dai_sysclk, | |
1721 | }; | |
1722 | ||
f0fba2ad LG |
1723 | static struct snd_soc_dai_driver wm8903_dai = { |
1724 | .name = "wm8903-hifi", | |
f1c0a02f MB |
1725 | .playback = { |
1726 | .stream_name = "Playback", | |
1727 | .channels_min = 2, | |
1728 | .channels_max = 2, | |
1729 | .rates = WM8903_PLAYBACK_RATES, | |
1730 | .formats = WM8903_FORMATS, | |
1731 | }, | |
1732 | .capture = { | |
1733 | .stream_name = "Capture", | |
1734 | .channels_min = 2, | |
1735 | .channels_max = 2, | |
1736 | .rates = WM8903_CAPTURE_RATES, | |
1737 | .formats = WM8903_FORMATS, | |
1738 | }, | |
6335d055 | 1739 | .ops = &wm8903_dai_ops, |
0d960e88 | 1740 | .symmetric_rates = 1, |
f1c0a02f | 1741 | }; |
f1c0a02f | 1742 | |
84b315ee | 1743 | static int wm8903_suspend(struct snd_soc_codec *codec) |
f1c0a02f | 1744 | { |
f1c0a02f MB |
1745 | wm8903_set_bias_level(codec, SND_SOC_BIAS_OFF); |
1746 | ||
1747 | return 0; | |
1748 | } | |
1749 | ||
f0fba2ad | 1750 | static int wm8903_resume(struct snd_soc_codec *codec) |
f1c0a02f | 1751 | { |
45e96755 | 1752 | struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec); |
f1c0a02f | 1753 | |
ee244ce4 | 1754 | regcache_sync(wm8903->regmap); |
f1c0a02f | 1755 | |
45e96755 | 1756 | wm8903_set_bias_level(codec, SND_SOC_BIAS_STANDBY); |
f1c0a02f MB |
1757 | |
1758 | return 0; | |
1759 | } | |
1760 | ||
7cfe5617 SW |
1761 | #ifdef CONFIG_GPIOLIB |
1762 | static inline struct wm8903_priv *gpio_to_wm8903(struct gpio_chip *chip) | |
1763 | { | |
1764 | return container_of(chip, struct wm8903_priv, gpio_chip); | |
1765 | } | |
1766 | ||
1767 | static int wm8903_gpio_request(struct gpio_chip *chip, unsigned offset) | |
1768 | { | |
1769 | if (offset >= WM8903_NUM_GPIO) | |
1770 | return -EINVAL; | |
1771 | ||
1772 | return 0; | |
1773 | } | |
1774 | ||
1775 | static int wm8903_gpio_direction_in(struct gpio_chip *chip, unsigned offset) | |
1776 | { | |
1777 | struct wm8903_priv *wm8903 = gpio_to_wm8903(chip); | |
1778 | struct snd_soc_codec *codec = wm8903->codec; | |
1779 | unsigned int mask, val; | |
385bd937 | 1780 | int ret; |
7cfe5617 SW |
1781 | |
1782 | mask = WM8903_GP1_FN_MASK | WM8903_GP1_DIR_MASK; | |
1783 | val = (WM8903_GPn_FN_GPIO_INPUT << WM8903_GP1_FN_SHIFT) | | |
1784 | WM8903_GP1_DIR; | |
1785 | ||
385bd937 AL |
1786 | ret = snd_soc_update_bits(codec, WM8903_GPIO_CONTROL_1 + offset, |
1787 | mask, val); | |
1788 | if (ret < 0) | |
1789 | return ret; | |
1790 | ||
1791 | return 0; | |
7cfe5617 SW |
1792 | } |
1793 | ||
1794 | static int wm8903_gpio_get(struct gpio_chip *chip, unsigned offset) | |
1795 | { | |
1796 | struct wm8903_priv *wm8903 = gpio_to_wm8903(chip); | |
1797 | struct snd_soc_codec *codec = wm8903->codec; | |
1798 | int reg; | |
1799 | ||
1800 | reg = snd_soc_read(codec, WM8903_GPIO_CONTROL_1 + offset); | |
1801 | ||
1802 | return (reg & WM8903_GP1_LVL_MASK) >> WM8903_GP1_LVL_SHIFT; | |
1803 | } | |
1804 | ||
1805 | static int wm8903_gpio_direction_out(struct gpio_chip *chip, | |
1806 | unsigned offset, int value) | |
1807 | { | |
1808 | struct wm8903_priv *wm8903 = gpio_to_wm8903(chip); | |
1809 | struct snd_soc_codec *codec = wm8903->codec; | |
1810 | unsigned int mask, val; | |
385bd937 | 1811 | int ret; |
7cfe5617 SW |
1812 | |
1813 | mask = WM8903_GP1_FN_MASK | WM8903_GP1_DIR_MASK | WM8903_GP1_LVL_MASK; | |
1814 | val = (WM8903_GPn_FN_GPIO_OUTPUT << WM8903_GP1_FN_SHIFT) | | |
1815 | (value << WM8903_GP2_LVL_SHIFT); | |
1816 | ||
385bd937 AL |
1817 | ret = snd_soc_update_bits(codec, WM8903_GPIO_CONTROL_1 + offset, |
1818 | mask, val); | |
1819 | if (ret < 0) | |
1820 | return ret; | |
1821 | ||
1822 | return 0; | |
7cfe5617 SW |
1823 | } |
1824 | ||
1825 | static void wm8903_gpio_set(struct gpio_chip *chip, unsigned offset, int value) | |
1826 | { | |
1827 | struct wm8903_priv *wm8903 = gpio_to_wm8903(chip); | |
1828 | struct snd_soc_codec *codec = wm8903->codec; | |
1829 | ||
1830 | snd_soc_update_bits(codec, WM8903_GPIO_CONTROL_1 + offset, | |
c8059930 MB |
1831 | WM8903_GP1_LVL_MASK, |
1832 | !!value << WM8903_GP1_LVL_SHIFT); | |
7cfe5617 SW |
1833 | } |
1834 | ||
1835 | static struct gpio_chip wm8903_template_chip = { | |
1836 | .label = "wm8903", | |
1837 | .owner = THIS_MODULE, | |
1838 | .request = wm8903_gpio_request, | |
1839 | .direction_input = wm8903_gpio_direction_in, | |
1840 | .get = wm8903_gpio_get, | |
1841 | .direction_output = wm8903_gpio_direction_out, | |
1842 | .set = wm8903_gpio_set, | |
1843 | .can_sleep = 1, | |
1844 | }; | |
1845 | ||
1846 | static void wm8903_init_gpio(struct snd_soc_codec *codec) | |
1847 | { | |
1848 | struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec); | |
c0eb27cf | 1849 | struct wm8903_platform_data *pdata = wm8903->pdata; |
7cfe5617 SW |
1850 | int ret; |
1851 | ||
1852 | wm8903->gpio_chip = wm8903_template_chip; | |
1853 | wm8903->gpio_chip.ngpio = WM8903_NUM_GPIO; | |
1854 | wm8903->gpio_chip.dev = codec->dev; | |
1855 | ||
db817784 | 1856 | if (pdata->gpio_base) |
7cfe5617 SW |
1857 | wm8903->gpio_chip.base = pdata->gpio_base; |
1858 | else | |
1859 | wm8903->gpio_chip.base = -1; | |
1860 | ||
1861 | ret = gpiochip_add(&wm8903->gpio_chip); | |
1862 | if (ret != 0) | |
1863 | dev_err(codec->dev, "Failed to add GPIOs: %d\n", ret); | |
1864 | } | |
1865 | ||
1866 | static void wm8903_free_gpio(struct snd_soc_codec *codec) | |
1867 | { | |
1868 | struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec); | |
1869 | int ret; | |
1870 | ||
1871 | ret = gpiochip_remove(&wm8903->gpio_chip); | |
1872 | if (ret != 0) | |
1873 | dev_err(codec->dev, "Failed to remove GPIOs: %d\n", ret); | |
1874 | } | |
1875 | #else | |
1876 | static void wm8903_init_gpio(struct snd_soc_codec *codec) | |
1877 | { | |
1878 | } | |
1879 | ||
1880 | static void wm8903_free_gpio(struct snd_soc_codec *codec) | |
1881 | { | |
1882 | } | |
1883 | #endif | |
1884 | ||
f0fba2ad | 1885 | static int wm8903_probe(struct snd_soc_codec *codec) |
f1c0a02f | 1886 | { |
f0fba2ad | 1887 | struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec); |
c0eb27cf | 1888 | struct wm8903_platform_data *pdata = wm8903->pdata; |
73b34ead | 1889 | int ret, i; |
8abd16a6 | 1890 | int trigger, irq_pol; |
f1c0a02f | 1891 | u16 val; |
db817784 | 1892 | bool mic_gpio = false; |
f1c0a02f | 1893 | |
7cfe5617 | 1894 | wm8903->codec = codec; |
ee244ce4 | 1895 | codec->control_data = wm8903->regmap; |
d58d5d55 | 1896 | |
ee244ce4 | 1897 | ret = snd_soc_codec_set_cache_io(codec, 8, 16, SND_SOC_REGMAP); |
8d50e447 | 1898 | if (ret != 0) { |
f0fba2ad LG |
1899 | dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret); |
1900 | return ret; | |
8d50e447 MB |
1901 | } |
1902 | ||
db817784 SW |
1903 | /* Set up GPIOs, detect if any are MIC detect outputs */ |
1904 | for (i = 0; i < ARRAY_SIZE(pdata->gpio_cfg); i++) { | |
1905 | if ((!pdata->gpio_cfg[i]) || | |
1906 | (pdata->gpio_cfg[i] > WM8903_GPIO_CONFIG_ZERO)) | |
1907 | continue; | |
905f6952 | 1908 | |
db817784 SW |
1909 | snd_soc_write(codec, WM8903_GPIO_CONTROL_1 + i, |
1910 | pdata->gpio_cfg[i] & 0x7fff); | |
905f6952 | 1911 | |
db817784 SW |
1912 | val = (pdata->gpio_cfg[i] & WM8903_GP1_FN_MASK) |
1913 | >> WM8903_GP1_FN_SHIFT; | |
905f6952 | 1914 | |
db817784 SW |
1915 | switch (val) { |
1916 | case WM8903_GPn_FN_MICBIAS_CURRENT_DETECT: | |
1917 | case WM8903_GPn_FN_MICBIAS_SHORT_DETECT: | |
1918 | mic_gpio = true; | |
1919 | break; | |
1920 | default: | |
1921 | break; | |
73b34ead | 1922 | } |
db817784 SW |
1923 | } |
1924 | ||
1925 | /* Set up microphone detection */ | |
1926 | snd_soc_write(codec, WM8903_MIC_BIAS_CONTROL_0, | |
1927 | pdata->micdet_cfg); | |
37f88e84 | 1928 | |
db817784 SW |
1929 | /* Microphone detection needs the WSEQ clock */ |
1930 | if (pdata->micdet_cfg) | |
1931 | snd_soc_update_bits(codec, WM8903_WRITE_SEQUENCER_0, | |
1932 | WM8903_WSEQ_ENA, WM8903_WSEQ_ENA); | |
37f88e84 | 1933 | |
db817784 SW |
1934 | /* If microphone detection is enabled by pdata but |
1935 | * detected via IRQ then interrupts can be lost before | |
1936 | * the machine driver has set up microphone detection | |
1937 | * IRQs as the IRQs are clear on read. The detection | |
1938 | * will be enabled when the machine driver configures. | |
1939 | */ | |
1940 | WARN_ON(!mic_gpio && (pdata->micdet_cfg & WM8903_MICDET_ENA)); | |
37f88e84 | 1941 | |
db817784 | 1942 | wm8903->mic_delay = pdata->micdet_delay; |
905f6952 | 1943 | |
f0fba2ad | 1944 | if (wm8903->irq) { |
db817784 | 1945 | if (pdata->irq_active_low) { |
8abd16a6 MB |
1946 | trigger = IRQF_TRIGGER_LOW; |
1947 | irq_pol = WM8903_IRQ_POL; | |
1948 | } else { | |
1949 | trigger = IRQF_TRIGGER_HIGH; | |
1950 | irq_pol = 0; | |
1951 | } | |
1952 | ||
1953 | snd_soc_update_bits(codec, WM8903_INTERRUPT_CONTROL, | |
1954 | WM8903_IRQ_POL, irq_pol); | |
1955 | ||
f0fba2ad | 1956 | ret = request_threaded_irq(wm8903->irq, NULL, wm8903_irq, |
8abd16a6 | 1957 | trigger | IRQF_ONESHOT, |
f0fba2ad | 1958 | "wm8903", codec); |
8abd16a6 | 1959 | if (ret != 0) { |
f0fba2ad | 1960 | dev_err(codec->dev, "Failed to request IRQ: %d\n", |
8abd16a6 | 1961 | ret); |
f0fba2ad | 1962 | return ret; |
8abd16a6 MB |
1963 | } |
1964 | ||
1965 | /* Enable write sequencer interrupts */ | |
1966 | snd_soc_update_bits(codec, WM8903_INTERRUPT_STATUS_1_MASK, | |
1967 | WM8903_IM_WSEQ_BUSY_EINT, 0); | |
1968 | } | |
73b34ead | 1969 | |
f1c0a02f MB |
1970 | /* power on device */ |
1971 | wm8903_set_bias_level(codec, SND_SOC_BIAS_STANDBY); | |
1972 | ||
1973 | /* Latch volume update bits */ | |
8d50e447 | 1974 | val = snd_soc_read(codec, WM8903_ADC_DIGITAL_VOLUME_LEFT); |
f1c0a02f | 1975 | val |= WM8903_ADCVU; |
8d50e447 MB |
1976 | snd_soc_write(codec, WM8903_ADC_DIGITAL_VOLUME_LEFT, val); |
1977 | snd_soc_write(codec, WM8903_ADC_DIGITAL_VOLUME_RIGHT, val); | |
f1c0a02f | 1978 | |
8d50e447 | 1979 | val = snd_soc_read(codec, WM8903_DAC_DIGITAL_VOLUME_LEFT); |
f1c0a02f | 1980 | val |= WM8903_DACVU; |
8d50e447 MB |
1981 | snd_soc_write(codec, WM8903_DAC_DIGITAL_VOLUME_LEFT, val); |
1982 | snd_soc_write(codec, WM8903_DAC_DIGITAL_VOLUME_RIGHT, val); | |
f1c0a02f | 1983 | |
8d50e447 | 1984 | val = snd_soc_read(codec, WM8903_ANALOGUE_OUT1_LEFT); |
f1c0a02f | 1985 | val |= WM8903_HPOUTVU; |
8d50e447 MB |
1986 | snd_soc_write(codec, WM8903_ANALOGUE_OUT1_LEFT, val); |
1987 | snd_soc_write(codec, WM8903_ANALOGUE_OUT1_RIGHT, val); | |
f1c0a02f | 1988 | |
8d50e447 | 1989 | val = snd_soc_read(codec, WM8903_ANALOGUE_OUT2_LEFT); |
f1c0a02f | 1990 | val |= WM8903_LINEOUTVU; |
8d50e447 MB |
1991 | snd_soc_write(codec, WM8903_ANALOGUE_OUT2_LEFT, val); |
1992 | snd_soc_write(codec, WM8903_ANALOGUE_OUT2_RIGHT, val); | |
f1c0a02f | 1993 | |
8d50e447 | 1994 | val = snd_soc_read(codec, WM8903_ANALOGUE_OUT3_LEFT); |
f1c0a02f | 1995 | val |= WM8903_SPKVU; |
8d50e447 MB |
1996 | snd_soc_write(codec, WM8903_ANALOGUE_OUT3_LEFT, val); |
1997 | snd_soc_write(codec, WM8903_ANALOGUE_OUT3_RIGHT, val); | |
f1c0a02f MB |
1998 | |
1999 | /* Enable DAC soft mute by default */ | |
e12adab0 MB |
2000 | snd_soc_update_bits(codec, WM8903_DAC_DIGITAL_1, |
2001 | WM8903_DAC_MUTEMODE | WM8903_DAC_MUTE, | |
2002 | WM8903_DAC_MUTEMODE | WM8903_DAC_MUTE); | |
f1c0a02f | 2003 | |
7cfe5617 SW |
2004 | wm8903_init_gpio(codec); |
2005 | ||
f1c0a02f MB |
2006 | return ret; |
2007 | } | |
2008 | ||
f0fba2ad LG |
2009 | /* power down chip */ |
2010 | static int wm8903_remove(struct snd_soc_codec *codec) | |
f1c0a02f | 2011 | { |
f99847a6 SW |
2012 | struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec); |
2013 | ||
7cfe5617 | 2014 | wm8903_free_gpio(codec); |
f0fba2ad | 2015 | wm8903_set_bias_level(codec, SND_SOC_BIAS_OFF); |
f99847a6 SW |
2016 | if (wm8903->irq) |
2017 | free_irq(wm8903->irq, codec); | |
2018 | ||
f0fba2ad LG |
2019 | return 0; |
2020 | } | |
f1c0a02f | 2021 | |
f0fba2ad LG |
2022 | static struct snd_soc_codec_driver soc_codec_dev_wm8903 = { |
2023 | .probe = wm8903_probe, | |
2024 | .remove = wm8903_remove, | |
2025 | .suspend = wm8903_suspend, | |
2026 | .resume = wm8903_resume, | |
2027 | .set_bias_level = wm8903_set_bias_level, | |
c5b6a9fe | 2028 | .seq_notifier = wm8903_seq_notifier, |
f4a10837 MB |
2029 | .controls = wm8903_snd_controls, |
2030 | .num_controls = ARRAY_SIZE(wm8903_snd_controls), | |
ecd01512 MB |
2031 | .dapm_widgets = wm8903_dapm_widgets, |
2032 | .num_dapm_widgets = ARRAY_SIZE(wm8903_dapm_widgets), | |
2033 | .dapm_routes = wm8903_intercon, | |
2034 | .num_dapm_routes = ARRAY_SIZE(wm8903_intercon), | |
f0fba2ad | 2035 | }; |
f1c0a02f | 2036 | |
ee244ce4 MB |
2037 | static const struct regmap_config wm8903_regmap = { |
2038 | .reg_bits = 8, | |
2039 | .val_bits = 16, | |
2040 | ||
2041 | .max_register = WM8903_MAX_REGISTER, | |
2042 | .volatile_reg = wm8903_volatile_register, | |
2043 | .readable_reg = wm8903_readable_register, | |
2044 | ||
2045 | .cache_type = REGCACHE_RBTREE, | |
2046 | .reg_defaults = wm8903_reg_defaults, | |
2047 | .num_reg_defaults = ARRAY_SIZE(wm8903_reg_defaults), | |
2048 | }; | |
2049 | ||
9d35f3e1 SW |
2050 | static int wm8903_set_pdata_irq_trigger(struct i2c_client *i2c, |
2051 | struct wm8903_platform_data *pdata) | |
2052 | { | |
2053 | struct irq_data *irq_data = irq_get_irq_data(i2c->irq); | |
2054 | if (!irq_data) { | |
2055 | dev_err(&i2c->dev, "Invalid IRQ: %d\n", | |
2056 | i2c->irq); | |
2057 | return -EINVAL; | |
2058 | } | |
2059 | ||
2060 | switch (irqd_get_trigger_type(irq_data)) { | |
2061 | case IRQ_TYPE_NONE: | |
6664ee11 | 2062 | default: |
9d35f3e1 SW |
2063 | /* |
2064 | * We assume the controller imposes no restrictions, | |
2065 | * so we are able to select active-high | |
2066 | */ | |
2067 | /* Fall-through */ | |
2068 | case IRQ_TYPE_LEVEL_HIGH: | |
2069 | pdata->irq_active_low = false; | |
2070 | break; | |
2071 | case IRQ_TYPE_LEVEL_LOW: | |
2072 | pdata->irq_active_low = true; | |
2073 | break; | |
9d35f3e1 SW |
2074 | } |
2075 | ||
2076 | return 0; | |
2077 | } | |
2078 | ||
5d680b3a SW |
2079 | static int wm8903_set_pdata_from_of(struct i2c_client *i2c, |
2080 | struct wm8903_platform_data *pdata) | |
2081 | { | |
2082 | const struct device_node *np = i2c->dev.of_node; | |
2083 | u32 val32; | |
2084 | int i; | |
2085 | ||
2086 | if (of_property_read_u32(np, "micdet-cfg", &val32) >= 0) | |
2087 | pdata->micdet_cfg = val32; | |
2088 | ||
2089 | if (of_property_read_u32(np, "micdet-delay", &val32) >= 0) | |
2090 | pdata->micdet_delay = val32; | |
2091 | ||
2092 | if (of_property_read_u32_array(np, "gpio-cfg", pdata->gpio_cfg, | |
2093 | ARRAY_SIZE(pdata->gpio_cfg)) >= 0) { | |
2094 | /* | |
2095 | * In device tree: 0 means "write 0", | |
2096 | * 0xffffffff means "don't touch". | |
2097 | * | |
2098 | * In platform data: 0 means "don't touch", | |
2099 | * 0x8000 means "write 0". | |
2100 | * | |
2101 | * Note: WM8903_GPIO_CONFIG_ZERO == 0x8000. | |
2102 | * | |
2103 | * Convert from DT to pdata representation here, | |
2104 | * so no other code needs to change. | |
2105 | */ | |
2106 | for (i = 0; i < ARRAY_SIZE(pdata->gpio_cfg); i++) { | |
2107 | if (pdata->gpio_cfg[i] == 0) { | |
2108 | pdata->gpio_cfg[i] = WM8903_GPIO_CONFIG_ZERO; | |
2109 | } else if (pdata->gpio_cfg[i] == 0xffffffff) { | |
2110 | pdata->gpio_cfg[i] = 0; | |
2111 | } else if (pdata->gpio_cfg[i] > 0x7fff) { | |
2112 | dev_err(&i2c->dev, "Invalid gpio-cfg[%d] %x\n", | |
2113 | i, pdata->gpio_cfg[i]); | |
2114 | return -EINVAL; | |
2115 | } | |
2116 | } | |
2117 | } | |
2118 | ||
2119 | return 0; | |
2120 | } | |
2121 | ||
f0fba2ad LG |
2122 | static __devinit int wm8903_i2c_probe(struct i2c_client *i2c, |
2123 | const struct i2c_device_id *id) | |
2124 | { | |
c0eb27cf | 2125 | struct wm8903_platform_data *pdata = dev_get_platdata(&i2c->dev); |
f0fba2ad | 2126 | struct wm8903_priv *wm8903; |
7d46a528 | 2127 | unsigned int val; |
f0fba2ad | 2128 | int ret; |
f1c0a02f | 2129 | |
2950cd22 MB |
2130 | wm8903 = devm_kzalloc(&i2c->dev, sizeof(struct wm8903_priv), |
2131 | GFP_KERNEL); | |
f0fba2ad LG |
2132 | if (wm8903 == NULL) |
2133 | return -ENOMEM; | |
8abd16a6 | 2134 | |
ee244ce4 MB |
2135 | wm8903->regmap = regmap_init_i2c(i2c, &wm8903_regmap); |
2136 | if (IS_ERR(wm8903->regmap)) { | |
2137 | ret = PTR_ERR(wm8903->regmap); | |
2138 | dev_err(&i2c->dev, "Failed to allocate register map: %d\n", | |
2139 | ret); | |
2140 | return ret; | |
2141 | } | |
2142 | ||
f0fba2ad | 2143 | i2c_set_clientdata(i2c, wm8903); |
f0fba2ad | 2144 | wm8903->irq = i2c->irq; |
d58d5d55 | 2145 | |
c0eb27cf SW |
2146 | /* If no platform data was supplied, create storage for defaults */ |
2147 | if (pdata) { | |
2148 | wm8903->pdata = pdata; | |
2149 | } else { | |
2150 | wm8903->pdata = devm_kzalloc(&i2c->dev, | |
2151 | sizeof(struct wm8903_platform_data), | |
2152 | GFP_KERNEL); | |
2153 | if (wm8903->pdata == NULL) { | |
2154 | dev_err(&i2c->dev, "Failed to allocate pdata\n"); | |
2155 | return -ENOMEM; | |
2156 | } | |
9d35f3e1 SW |
2157 | |
2158 | if (i2c->irq) { | |
2159 | ret = wm8903_set_pdata_irq_trigger(i2c, wm8903->pdata); | |
2160 | if (ret != 0) | |
2161 | return ret; | |
2162 | } | |
5d680b3a SW |
2163 | |
2164 | if (i2c->dev.of_node) { | |
2165 | ret = wm8903_set_pdata_from_of(i2c, wm8903->pdata); | |
2166 | if (ret != 0) | |
2167 | return ret; | |
2168 | } | |
c0eb27cf SW |
2169 | } |
2170 | ||
7d46a528 MB |
2171 | ret = regmap_read(wm8903->regmap, WM8903_SW_RESET_AND_ID, &val); |
2172 | if (ret != 0) { | |
2173 | dev_err(&i2c->dev, "Failed to read chip ID: %d\n", ret); | |
2174 | goto err; | |
2175 | } | |
2176 | if (val != 0x8903) { | |
2177 | dev_err(&i2c->dev, "Device with ID %x is not a WM8903\n", val); | |
2178 | ret = -ENODEV; | |
2179 | goto err; | |
2180 | } | |
2181 | ||
2182 | ret = regmap_read(wm8903->regmap, WM8903_REVISION_NUMBER, &val); | |
2183 | if (ret != 0) { | |
2184 | dev_err(&i2c->dev, "Failed to read chip revision: %d\n", ret); | |
2185 | goto err; | |
2186 | } | |
2187 | dev_info(&i2c->dev, "WM8903 revision %c\n", | |
2188 | (val & WM8903_CHIP_REV_MASK) + 'A'); | |
2189 | ||
2190 | /* Reset the device */ | |
2191 | regmap_write(wm8903->regmap, WM8903_SW_RESET_AND_ID, 0x8903); | |
2192 | ||
f0fba2ad LG |
2193 | ret = snd_soc_register_codec(&i2c->dev, |
2194 | &soc_codec_dev_wm8903, &wm8903_dai, 1); | |
ee244ce4 MB |
2195 | if (ret != 0) |
2196 | goto err; | |
2950cd22 | 2197 | |
ee244ce4 MB |
2198 | return 0; |
2199 | err: | |
2200 | regmap_exit(wm8903->regmap); | |
f0fba2ad LG |
2201 | return ret; |
2202 | } | |
f1c0a02f | 2203 | |
f0fba2ad LG |
2204 | static __devexit int wm8903_i2c_remove(struct i2c_client *client) |
2205 | { | |
ee244ce4 MB |
2206 | struct wm8903_priv *wm8903 = i2c_get_clientdata(client); |
2207 | ||
2208 | regmap_exit(wm8903->regmap); | |
f0fba2ad | 2209 | snd_soc_unregister_codec(&client->dev); |
ee244ce4 | 2210 | |
f1c0a02f MB |
2211 | return 0; |
2212 | } | |
2213 | ||
f18b4e2e SW |
2214 | static const struct of_device_id wm8903_of_match[] = { |
2215 | { .compatible = "wlf,wm8903", }, | |
2216 | {}, | |
2217 | }; | |
2218 | MODULE_DEVICE_TABLE(of, wm8903_of_match); | |
2219 | ||
f1c0a02f | 2220 | static const struct i2c_device_id wm8903_i2c_id[] = { |
f0fba2ad LG |
2221 | { "wm8903", 0 }, |
2222 | { } | |
f1c0a02f MB |
2223 | }; |
2224 | MODULE_DEVICE_TABLE(i2c, wm8903_i2c_id); | |
2225 | ||
2226 | static struct i2c_driver wm8903_i2c_driver = { | |
2227 | .driver = { | |
4b592c91 | 2228 | .name = "wm8903", |
f1c0a02f | 2229 | .owner = THIS_MODULE, |
f18b4e2e | 2230 | .of_match_table = wm8903_of_match, |
f1c0a02f | 2231 | }, |
f0fba2ad LG |
2232 | .probe = wm8903_i2c_probe, |
2233 | .remove = __devexit_p(wm8903_i2c_remove), | |
f1c0a02f MB |
2234 | .id_table = wm8903_i2c_id, |
2235 | }; | |
2236 | ||
f0fba2ad | 2237 | static int __init wm8903_modinit(void) |
f1c0a02f | 2238 | { |
f1c0a02f | 2239 | int ret = 0; |
f0fba2ad LG |
2240 | ret = i2c_add_driver(&wm8903_i2c_driver); |
2241 | if (ret != 0) { | |
2242 | printk(KERN_ERR "Failed to register wm8903 I2C driver: %d\n", | |
2243 | ret); | |
f1c0a02f | 2244 | } |
f1c0a02f | 2245 | return ret; |
64089b84 MB |
2246 | } |
2247 | module_init(wm8903_modinit); | |
2248 | ||
2249 | static void __exit wm8903_exit(void) | |
2250 | { | |
d58d5d55 | 2251 | i2c_del_driver(&wm8903_i2c_driver); |
64089b84 MB |
2252 | } |
2253 | module_exit(wm8903_exit); | |
2254 | ||
f1c0a02f MB |
2255 | MODULE_DESCRIPTION("ASoC WM8903 driver"); |
2256 | MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.cm>"); | |
2257 | MODULE_LICENSE("GPL"); |