Commit | Line | Data |
---|---|---|
f1c0a02f MB |
1 | /* |
2 | * wm8903.c -- WM8903 ALSA SoC Audio driver | |
3 | * | |
4 | * Copyright 2008 Wolfson Microelectronics | |
5 | * | |
6 | * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> | |
7 | * | |
8 | * This program is free software; you can redistribute it and/or modify | |
9 | * it under the terms of the GNU General Public License version 2 as | |
10 | * published by the Free Software Foundation. | |
11 | * | |
12 | * TODO: | |
13 | * - TDM mode configuration. | |
f1c0a02f MB |
14 | * - Digital microphone support. |
15 | * - Interrupt support (mic detect and sequencer). | |
16 | */ | |
17 | ||
18 | #include <linux/module.h> | |
19 | #include <linux/moduleparam.h> | |
20 | #include <linux/init.h> | |
21 | #include <linux/delay.h> | |
22 | #include <linux/pm.h> | |
23 | #include <linux/i2c.h> | |
24 | #include <linux/platform_device.h> | |
25 | #include <sound/core.h> | |
26 | #include <sound/pcm.h> | |
27 | #include <sound/pcm_params.h> | |
28 | #include <sound/tlv.h> | |
29 | #include <sound/soc.h> | |
30 | #include <sound/soc-dapm.h> | |
31 | #include <sound/initval.h> | |
32 | ||
33 | #include "wm8903.h" | |
34 | ||
f1c0a02f MB |
35 | /* Register defaults at reset */ |
36 | static u16 wm8903_reg_defaults[] = { | |
37 | 0x8903, /* R0 - SW Reset and ID */ | |
38 | 0x0000, /* R1 - Revision Number */ | |
39 | 0x0000, /* R2 */ | |
40 | 0x0000, /* R3 */ | |
41 | 0x0018, /* R4 - Bias Control 0 */ | |
42 | 0x0000, /* R5 - VMID Control 0 */ | |
43 | 0x0000, /* R6 - Mic Bias Control 0 */ | |
44 | 0x0000, /* R7 */ | |
45 | 0x0001, /* R8 - Analogue DAC 0 */ | |
46 | 0x0000, /* R9 */ | |
47 | 0x0001, /* R10 - Analogue ADC 0 */ | |
48 | 0x0000, /* R11 */ | |
49 | 0x0000, /* R12 - Power Management 0 */ | |
50 | 0x0000, /* R13 - Power Management 1 */ | |
51 | 0x0000, /* R14 - Power Management 2 */ | |
52 | 0x0000, /* R15 - Power Management 3 */ | |
53 | 0x0000, /* R16 - Power Management 4 */ | |
54 | 0x0000, /* R17 - Power Management 5 */ | |
55 | 0x0000, /* R18 - Power Management 6 */ | |
56 | 0x0000, /* R19 */ | |
57 | 0x0400, /* R20 - Clock Rates 0 */ | |
58 | 0x0D07, /* R21 - Clock Rates 1 */ | |
59 | 0x0000, /* R22 - Clock Rates 2 */ | |
60 | 0x0000, /* R23 */ | |
61 | 0x0050, /* R24 - Audio Interface 0 */ | |
62 | 0x0242, /* R25 - Audio Interface 1 */ | |
63 | 0x0008, /* R26 - Audio Interface 2 */ | |
64 | 0x0022, /* R27 - Audio Interface 3 */ | |
65 | 0x0000, /* R28 */ | |
66 | 0x0000, /* R29 */ | |
67 | 0x00C0, /* R30 - DAC Digital Volume Left */ | |
68 | 0x00C0, /* R31 - DAC Digital Volume Right */ | |
69 | 0x0000, /* R32 - DAC Digital 0 */ | |
70 | 0x0000, /* R33 - DAC Digital 1 */ | |
71 | 0x0000, /* R34 */ | |
72 | 0x0000, /* R35 */ | |
73 | 0x00C0, /* R36 - ADC Digital Volume Left */ | |
74 | 0x00C0, /* R37 - ADC Digital Volume Right */ | |
75 | 0x0000, /* R38 - ADC Digital 0 */ | |
76 | 0x0073, /* R39 - Digital Microphone 0 */ | |
77 | 0x09BF, /* R40 - DRC 0 */ | |
78 | 0x3241, /* R41 - DRC 1 */ | |
79 | 0x0020, /* R42 - DRC 2 */ | |
80 | 0x0000, /* R43 - DRC 3 */ | |
81 | 0x0085, /* R44 - Analogue Left Input 0 */ | |
82 | 0x0085, /* R45 - Analogue Right Input 0 */ | |
83 | 0x0044, /* R46 - Analogue Left Input 1 */ | |
84 | 0x0044, /* R47 - Analogue Right Input 1 */ | |
85 | 0x0000, /* R48 */ | |
86 | 0x0000, /* R49 */ | |
87 | 0x0008, /* R50 - Analogue Left Mix 0 */ | |
88 | 0x0004, /* R51 - Analogue Right Mix 0 */ | |
89 | 0x0000, /* R52 - Analogue Spk Mix Left 0 */ | |
90 | 0x0000, /* R53 - Analogue Spk Mix Left 1 */ | |
91 | 0x0000, /* R54 - Analogue Spk Mix Right 0 */ | |
92 | 0x0000, /* R55 - Analogue Spk Mix Right 1 */ | |
93 | 0x0000, /* R56 */ | |
94 | 0x002D, /* R57 - Analogue OUT1 Left */ | |
95 | 0x002D, /* R58 - Analogue OUT1 Right */ | |
96 | 0x0039, /* R59 - Analogue OUT2 Left */ | |
97 | 0x0039, /* R60 - Analogue OUT2 Right */ | |
98 | 0x0100, /* R61 */ | |
99 | 0x0139, /* R62 - Analogue OUT3 Left */ | |
100 | 0x0139, /* R63 - Analogue OUT3 Right */ | |
101 | 0x0000, /* R64 */ | |
102 | 0x0000, /* R65 - Analogue SPK Output Control 0 */ | |
103 | 0x0000, /* R66 */ | |
104 | 0x0010, /* R67 - DC Servo 0 */ | |
105 | 0x0100, /* R68 */ | |
106 | 0x00A4, /* R69 - DC Servo 2 */ | |
107 | 0x0807, /* R70 */ | |
108 | 0x0000, /* R71 */ | |
109 | 0x0000, /* R72 */ | |
110 | 0x0000, /* R73 */ | |
111 | 0x0000, /* R74 */ | |
112 | 0x0000, /* R75 */ | |
113 | 0x0000, /* R76 */ | |
114 | 0x0000, /* R77 */ | |
115 | 0x0000, /* R78 */ | |
116 | 0x000E, /* R79 */ | |
117 | 0x0000, /* R80 */ | |
118 | 0x0000, /* R81 */ | |
119 | 0x0000, /* R82 */ | |
120 | 0x0000, /* R83 */ | |
121 | 0x0000, /* R84 */ | |
122 | 0x0000, /* R85 */ | |
123 | 0x0000, /* R86 */ | |
124 | 0x0006, /* R87 */ | |
125 | 0x0000, /* R88 */ | |
126 | 0x0000, /* R89 */ | |
127 | 0x0000, /* R90 - Analogue HP 0 */ | |
128 | 0x0060, /* R91 */ | |
129 | 0x0000, /* R92 */ | |
130 | 0x0000, /* R93 */ | |
131 | 0x0000, /* R94 - Analogue Lineout 0 */ | |
132 | 0x0060, /* R95 */ | |
133 | 0x0000, /* R96 */ | |
134 | 0x0000, /* R97 */ | |
135 | 0x0000, /* R98 - Charge Pump 0 */ | |
136 | 0x1F25, /* R99 */ | |
137 | 0x2B19, /* R100 */ | |
138 | 0x01C0, /* R101 */ | |
139 | 0x01EF, /* R102 */ | |
140 | 0x2B00, /* R103 */ | |
141 | 0x0000, /* R104 - Class W 0 */ | |
142 | 0x01C0, /* R105 */ | |
143 | 0x1C10, /* R106 */ | |
144 | 0x0000, /* R107 */ | |
145 | 0x0000, /* R108 - Write Sequencer 0 */ | |
146 | 0x0000, /* R109 - Write Sequencer 1 */ | |
147 | 0x0000, /* R110 - Write Sequencer 2 */ | |
148 | 0x0000, /* R111 - Write Sequencer 3 */ | |
149 | 0x0000, /* R112 - Write Sequencer 4 */ | |
150 | 0x0000, /* R113 */ | |
151 | 0x0000, /* R114 - Control Interface */ | |
152 | 0x0000, /* R115 */ | |
153 | 0x00A8, /* R116 - GPIO Control 1 */ | |
154 | 0x00A8, /* R117 - GPIO Control 2 */ | |
155 | 0x00A8, /* R118 - GPIO Control 3 */ | |
156 | 0x0220, /* R119 - GPIO Control 4 */ | |
157 | 0x01A0, /* R120 - GPIO Control 5 */ | |
158 | 0x0000, /* R121 - Interrupt Status 1 */ | |
159 | 0xFFFF, /* R122 - Interrupt Status 1 Mask */ | |
160 | 0x0000, /* R123 - Interrupt Polarity 1 */ | |
161 | 0x0000, /* R124 */ | |
162 | 0x0003, /* R125 */ | |
163 | 0x0000, /* R126 - Interrupt Control */ | |
164 | 0x0000, /* R127 */ | |
165 | 0x0005, /* R128 */ | |
166 | 0x0000, /* R129 - Control Interface Test 1 */ | |
167 | 0x0000, /* R130 */ | |
168 | 0x0000, /* R131 */ | |
169 | 0x0000, /* R132 */ | |
170 | 0x0000, /* R133 */ | |
171 | 0x0000, /* R134 */ | |
172 | 0x03FF, /* R135 */ | |
173 | 0x0007, /* R136 */ | |
174 | 0x0040, /* R137 */ | |
175 | 0x0000, /* R138 */ | |
176 | 0x0000, /* R139 */ | |
177 | 0x0000, /* R140 */ | |
178 | 0x0000, /* R141 */ | |
179 | 0x0000, /* R142 */ | |
180 | 0x0000, /* R143 */ | |
181 | 0x0000, /* R144 */ | |
182 | 0x0000, /* R145 */ | |
183 | 0x0000, /* R146 */ | |
184 | 0x0000, /* R147 */ | |
185 | 0x4000, /* R148 */ | |
186 | 0x6810, /* R149 - Charge Pump Test 1 */ | |
187 | 0x0004, /* R150 */ | |
188 | 0x0000, /* R151 */ | |
189 | 0x0000, /* R152 */ | |
190 | 0x0000, /* R153 */ | |
191 | 0x0000, /* R154 */ | |
192 | 0x0000, /* R155 */ | |
193 | 0x0000, /* R156 */ | |
194 | 0x0000, /* R157 */ | |
195 | 0x0000, /* R158 */ | |
196 | 0x0000, /* R159 */ | |
197 | 0x0000, /* R160 */ | |
198 | 0x0000, /* R161 */ | |
199 | 0x0000, /* R162 */ | |
200 | 0x0000, /* R163 */ | |
201 | 0x0028, /* R164 - Clock Rate Test 4 */ | |
202 | 0x0004, /* R165 */ | |
203 | 0x0000, /* R166 */ | |
204 | 0x0060, /* R167 */ | |
205 | 0x0000, /* R168 */ | |
206 | 0x0000, /* R169 */ | |
207 | 0x0000, /* R170 */ | |
208 | 0x0000, /* R171 */ | |
209 | 0x0000, /* R172 - Analogue Output Bias 0 */ | |
210 | }; | |
211 | ||
d58d5d55 MB |
212 | struct wm8903_priv { |
213 | struct snd_soc_codec codec; | |
214 | u16 reg_cache[ARRAY_SIZE(wm8903_reg_defaults)]; | |
215 | ||
216 | int sysclk; | |
217 | ||
218 | /* Reference counts */ | |
d58d5d55 MB |
219 | int class_w_users; |
220 | int playback_active; | |
221 | int capture_active; | |
222 | ||
223 | struct snd_pcm_substream *master_substream; | |
224 | struct snd_pcm_substream *slave_substream; | |
225 | }; | |
226 | ||
8d50e447 | 227 | static int wm8903_volatile_register(unsigned int reg) |
f1c0a02f MB |
228 | { |
229 | switch (reg) { | |
230 | case WM8903_SW_RESET_AND_ID: | |
231 | case WM8903_REVISION_NUMBER: | |
232 | case WM8903_INTERRUPT_STATUS_1: | |
233 | case WM8903_WRITE_SEQUENCER_4: | |
8d50e447 | 234 | return 1; |
f1c0a02f MB |
235 | |
236 | default: | |
f1c0a02f | 237 | return 0; |
8d50e447 | 238 | } |
f1c0a02f MB |
239 | } |
240 | ||
241 | static int wm8903_run_sequence(struct snd_soc_codec *codec, unsigned int start) | |
242 | { | |
243 | u16 reg[5]; | |
244 | struct i2c_client *i2c = codec->control_data; | |
245 | ||
246 | BUG_ON(start > 48); | |
247 | ||
37f88e84 | 248 | /* Enable the sequencer if it's not already on */ |
8d50e447 | 249 | reg[0] = snd_soc_read(codec, WM8903_WRITE_SEQUENCER_0); |
37f88e84 MB |
250 | snd_soc_write(codec, WM8903_WRITE_SEQUENCER_0, |
251 | reg[0] | WM8903_WSEQ_ENA); | |
f1c0a02f MB |
252 | |
253 | dev_dbg(&i2c->dev, "Starting sequence at %d\n", start); | |
254 | ||
8d50e447 | 255 | snd_soc_write(codec, WM8903_WRITE_SEQUENCER_3, |
f1c0a02f MB |
256 | start | WM8903_WSEQ_START); |
257 | ||
258 | /* Wait for it to complete. If we have the interrupt wired up then | |
259 | * we could block waiting for an interrupt, though polling may still | |
260 | * be desirable for diagnostic purposes. | |
261 | */ | |
262 | do { | |
263 | msleep(10); | |
264 | ||
8d50e447 | 265 | reg[4] = snd_soc_read(codec, WM8903_WRITE_SEQUENCER_4); |
f1c0a02f MB |
266 | } while (reg[4] & WM8903_WSEQ_BUSY); |
267 | ||
268 | dev_dbg(&i2c->dev, "Sequence complete\n"); | |
269 | ||
37f88e84 MB |
270 | /* Disable the sequencer again if we enabled it */ |
271 | snd_soc_write(codec, WM8903_WRITE_SEQUENCER_0, reg[0]); | |
f1c0a02f MB |
272 | |
273 | return 0; | |
274 | } | |
275 | ||
276 | static void wm8903_sync_reg_cache(struct snd_soc_codec *codec, u16 *cache) | |
277 | { | |
278 | int i; | |
279 | ||
280 | /* There really ought to be something better we can do here :/ */ | |
281 | for (i = 0; i < ARRAY_SIZE(wm8903_reg_defaults); i++) | |
8d50e447 | 282 | cache[i] = codec->hw_read(codec, i); |
f1c0a02f MB |
283 | } |
284 | ||
285 | static void wm8903_reset(struct snd_soc_codec *codec) | |
286 | { | |
8d50e447 | 287 | snd_soc_write(codec, WM8903_SW_RESET_AND_ID, 0); |
d58d5d55 MB |
288 | memcpy(codec->reg_cache, wm8903_reg_defaults, |
289 | sizeof(wm8903_reg_defaults)); | |
f1c0a02f MB |
290 | } |
291 | ||
292 | #define WM8903_OUTPUT_SHORT 0x8 | |
293 | #define WM8903_OUTPUT_OUT 0x4 | |
294 | #define WM8903_OUTPUT_INT 0x2 | |
295 | #define WM8903_OUTPUT_IN 0x1 | |
296 | ||
42768a12 MB |
297 | static int wm8903_cp_event(struct snd_soc_dapm_widget *w, |
298 | struct snd_kcontrol *kcontrol, int event) | |
299 | { | |
300 | WARN_ON(event != SND_SOC_DAPM_POST_PMU); | |
301 | mdelay(4); | |
302 | ||
303 | return 0; | |
304 | } | |
305 | ||
f1c0a02f MB |
306 | /* |
307 | * Event for headphone and line out amplifier power changes. Special | |
308 | * power up/down sequences are required in order to maximise pop/click | |
309 | * performance. | |
310 | */ | |
311 | static int wm8903_output_event(struct snd_soc_dapm_widget *w, | |
312 | struct snd_kcontrol *kcontrol, int event) | |
313 | { | |
314 | struct snd_soc_codec *codec = w->codec; | |
f1c0a02f | 315 | u16 val; |
0bc286e2 | 316 | u16 reg; |
d7d5c547 MB |
317 | u16 dcs_reg; |
318 | u16 dcs_bit; | |
0bc286e2 | 319 | int shift; |
f1c0a02f MB |
320 | |
321 | switch (w->reg) { | |
322 | case WM8903_POWER_MANAGEMENT_2: | |
323 | reg = WM8903_ANALOGUE_HP_0; | |
d7d5c547 | 324 | dcs_bit = 0 + w->shift; |
f1c0a02f MB |
325 | break; |
326 | case WM8903_POWER_MANAGEMENT_3: | |
327 | reg = WM8903_ANALOGUE_LINEOUT_0; | |
d7d5c547 | 328 | dcs_bit = 2 + w->shift; |
f1c0a02f MB |
329 | break; |
330 | default: | |
331 | BUG(); | |
1e297a19 | 332 | return -EINVAL; /* Spurious warning from some compilers */ |
f1c0a02f MB |
333 | } |
334 | ||
335 | switch (w->shift) { | |
336 | case 0: | |
337 | shift = 0; | |
338 | break; | |
339 | case 1: | |
340 | shift = 4; | |
341 | break; | |
342 | default: | |
343 | BUG(); | |
1e297a19 | 344 | return -EINVAL; /* Spurious warning from some compilers */ |
f1c0a02f MB |
345 | } |
346 | ||
347 | if (event & SND_SOC_DAPM_PRE_PMU) { | |
8d50e447 | 348 | val = snd_soc_read(codec, reg); |
f1c0a02f MB |
349 | |
350 | /* Short the output */ | |
351 | val &= ~(WM8903_OUTPUT_SHORT << shift); | |
8d50e447 | 352 | snd_soc_write(codec, reg, val); |
f1c0a02f MB |
353 | } |
354 | ||
355 | if (event & SND_SOC_DAPM_POST_PMU) { | |
8d50e447 | 356 | val = snd_soc_read(codec, reg); |
f1c0a02f MB |
357 | |
358 | val |= (WM8903_OUTPUT_IN << shift); | |
8d50e447 | 359 | snd_soc_write(codec, reg, val); |
f1c0a02f MB |
360 | |
361 | val |= (WM8903_OUTPUT_INT << shift); | |
8d50e447 | 362 | snd_soc_write(codec, reg, val); |
f1c0a02f MB |
363 | |
364 | /* Turn on the output ENA_OUTP */ | |
365 | val |= (WM8903_OUTPUT_OUT << shift); | |
8d50e447 | 366 | snd_soc_write(codec, reg, val); |
f1c0a02f | 367 | |
d7d5c547 | 368 | /* Enable the DC servo */ |
8d50e447 | 369 | dcs_reg = snd_soc_read(codec, WM8903_DC_SERVO_0); |
d7d5c547 | 370 | dcs_reg |= dcs_bit; |
8d50e447 | 371 | snd_soc_write(codec, WM8903_DC_SERVO_0, dcs_reg); |
d7d5c547 | 372 | |
f1c0a02f MB |
373 | /* Remove the short */ |
374 | val |= (WM8903_OUTPUT_SHORT << shift); | |
8d50e447 | 375 | snd_soc_write(codec, reg, val); |
f1c0a02f MB |
376 | } |
377 | ||
378 | if (event & SND_SOC_DAPM_PRE_PMD) { | |
8d50e447 | 379 | val = snd_soc_read(codec, reg); |
f1c0a02f MB |
380 | |
381 | /* Short the output */ | |
382 | val &= ~(WM8903_OUTPUT_SHORT << shift); | |
8d50e447 | 383 | snd_soc_write(codec, reg, val); |
f1c0a02f | 384 | |
d7d5c547 | 385 | /* Disable the DC servo */ |
8d50e447 | 386 | dcs_reg = snd_soc_read(codec, WM8903_DC_SERVO_0); |
d7d5c547 | 387 | dcs_reg &= ~dcs_bit; |
8d50e447 | 388 | snd_soc_write(codec, WM8903_DC_SERVO_0, dcs_reg); |
d7d5c547 | 389 | |
f1c0a02f MB |
390 | /* Then disable the intermediate and output stages */ |
391 | val &= ~((WM8903_OUTPUT_OUT | WM8903_OUTPUT_INT | | |
392 | WM8903_OUTPUT_IN) << shift); | |
8d50e447 | 393 | snd_soc_write(codec, reg, val); |
f1c0a02f MB |
394 | } |
395 | ||
f1c0a02f MB |
396 | return 0; |
397 | } | |
398 | ||
399 | /* | |
400 | * When used with DAC outputs only the WM8903 charge pump supports | |
401 | * operation in class W mode, providing very low power consumption | |
402 | * when used with digital sources. Enable and disable this mode | |
403 | * automatically depending on the mixer configuration. | |
404 | * | |
405 | * All the relevant controls are simple switches. | |
406 | */ | |
407 | static int wm8903_class_w_put(struct snd_kcontrol *kcontrol, | |
408 | struct snd_ctl_elem_value *ucontrol) | |
409 | { | |
410 | struct snd_soc_dapm_widget *widget = snd_kcontrol_chip(kcontrol); | |
411 | struct snd_soc_codec *codec = widget->codec; | |
412 | struct wm8903_priv *wm8903 = codec->private_data; | |
413 | struct i2c_client *i2c = codec->control_data; | |
414 | u16 reg; | |
415 | int ret; | |
416 | ||
8d50e447 | 417 | reg = snd_soc_read(codec, WM8903_CLASS_W_0); |
f1c0a02f MB |
418 | |
419 | /* Turn it off if we're about to enable bypass */ | |
420 | if (ucontrol->value.integer.value[0]) { | |
421 | if (wm8903->class_w_users == 0) { | |
422 | dev_dbg(&i2c->dev, "Disabling Class W\n"); | |
8d50e447 | 423 | snd_soc_write(codec, WM8903_CLASS_W_0, reg & |
f1c0a02f MB |
424 | ~(WM8903_CP_DYN_FREQ | WM8903_CP_DYN_V)); |
425 | } | |
426 | wm8903->class_w_users++; | |
427 | } | |
428 | ||
429 | /* Implement the change */ | |
430 | ret = snd_soc_dapm_put_volsw(kcontrol, ucontrol); | |
431 | ||
432 | /* If we've just disabled the last bypass path turn Class W on */ | |
433 | if (!ucontrol->value.integer.value[0]) { | |
434 | if (wm8903->class_w_users == 1) { | |
435 | dev_dbg(&i2c->dev, "Enabling Class W\n"); | |
8d50e447 | 436 | snd_soc_write(codec, WM8903_CLASS_W_0, reg | |
f1c0a02f MB |
437 | WM8903_CP_DYN_FREQ | WM8903_CP_DYN_V); |
438 | } | |
439 | wm8903->class_w_users--; | |
440 | } | |
441 | ||
442 | dev_dbg(&i2c->dev, "Bypass use count now %d\n", | |
443 | wm8903->class_w_users); | |
444 | ||
445 | return ret; | |
446 | } | |
447 | ||
448 | #define SOC_DAPM_SINGLE_W(xname, reg, shift, max, invert) \ | |
449 | { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ | |
450 | .info = snd_soc_info_volsw, \ | |
451 | .get = snd_soc_dapm_get_volsw, .put = wm8903_class_w_put, \ | |
452 | .private_value = SOC_SINGLE_VALUE(reg, shift, max, invert) } | |
453 | ||
454 | ||
455 | /* ALSA can only do steps of .01dB */ | |
456 | static const DECLARE_TLV_DB_SCALE(digital_tlv, -7200, 75, 1); | |
457 | ||
291ce18c | 458 | static const DECLARE_TLV_DB_SCALE(digital_sidetone_tlv, -3600, 300, 0); |
f1c0a02f MB |
459 | static const DECLARE_TLV_DB_SCALE(out_tlv, -5700, 100, 0); |
460 | ||
461 | static const DECLARE_TLV_DB_SCALE(drc_tlv_thresh, 0, 75, 0); | |
462 | static const DECLARE_TLV_DB_SCALE(drc_tlv_amp, -2250, 75, 0); | |
463 | static const DECLARE_TLV_DB_SCALE(drc_tlv_min, 0, 600, 0); | |
464 | static const DECLARE_TLV_DB_SCALE(drc_tlv_max, 1200, 600, 0); | |
465 | static const DECLARE_TLV_DB_SCALE(drc_tlv_startup, -300, 50, 0); | |
466 | ||
467 | static const char *drc_slope_text[] = { | |
468 | "1", "1/2", "1/4", "1/8", "1/16", "0" | |
469 | }; | |
470 | ||
471 | static const struct soc_enum drc_slope_r0 = | |
472 | SOC_ENUM_SINGLE(WM8903_DRC_2, 3, 6, drc_slope_text); | |
473 | ||
474 | static const struct soc_enum drc_slope_r1 = | |
475 | SOC_ENUM_SINGLE(WM8903_DRC_2, 0, 6, drc_slope_text); | |
476 | ||
477 | static const char *drc_attack_text[] = { | |
478 | "instantaneous", | |
479 | "363us", "762us", "1.45ms", "2.9ms", "5.8ms", "11.6ms", "23.2ms", | |
480 | "46.4ms", "92.8ms", "185.6ms" | |
481 | }; | |
482 | ||
483 | static const struct soc_enum drc_attack = | |
484 | SOC_ENUM_SINGLE(WM8903_DRC_1, 12, 11, drc_attack_text); | |
485 | ||
486 | static const char *drc_decay_text[] = { | |
487 | "186ms", "372ms", "743ms", "1.49s", "2.97s", "5.94s", "11.89s", | |
488 | "23.87s", "47.56s" | |
489 | }; | |
490 | ||
491 | static const struct soc_enum drc_decay = | |
492 | SOC_ENUM_SINGLE(WM8903_DRC_1, 8, 9, drc_decay_text); | |
493 | ||
494 | static const char *drc_ff_delay_text[] = { | |
495 | "5 samples", "9 samples" | |
496 | }; | |
497 | ||
498 | static const struct soc_enum drc_ff_delay = | |
499 | SOC_ENUM_SINGLE(WM8903_DRC_0, 5, 2, drc_ff_delay_text); | |
500 | ||
501 | static const char *drc_qr_decay_text[] = { | |
502 | "0.725ms", "1.45ms", "5.8ms" | |
503 | }; | |
504 | ||
505 | static const struct soc_enum drc_qr_decay = | |
506 | SOC_ENUM_SINGLE(WM8903_DRC_1, 4, 3, drc_qr_decay_text); | |
507 | ||
508 | static const char *drc_smoothing_text[] = { | |
509 | "Low", "Medium", "High" | |
510 | }; | |
511 | ||
512 | static const struct soc_enum drc_smoothing = | |
513 | SOC_ENUM_SINGLE(WM8903_DRC_0, 11, 3, drc_smoothing_text); | |
514 | ||
515 | static const char *soft_mute_text[] = { | |
516 | "Fast (fs/2)", "Slow (fs/32)" | |
517 | }; | |
518 | ||
519 | static const struct soc_enum soft_mute = | |
520 | SOC_ENUM_SINGLE(WM8903_DAC_DIGITAL_1, 10, 2, soft_mute_text); | |
521 | ||
522 | static const char *mute_mode_text[] = { | |
523 | "Hard", "Soft" | |
524 | }; | |
525 | ||
526 | static const struct soc_enum mute_mode = | |
527 | SOC_ENUM_SINGLE(WM8903_DAC_DIGITAL_1, 9, 2, mute_mode_text); | |
528 | ||
529 | static const char *dac_deemphasis_text[] = { | |
530 | "Disabled", "32kHz", "44.1kHz", "48kHz" | |
531 | }; | |
532 | ||
533 | static const struct soc_enum dac_deemphasis = | |
534 | SOC_ENUM_SINGLE(WM8903_DAC_DIGITAL_1, 1, 4, dac_deemphasis_text); | |
535 | ||
536 | static const char *companding_text[] = { | |
537 | "ulaw", "alaw" | |
538 | }; | |
539 | ||
540 | static const struct soc_enum dac_companding = | |
541 | SOC_ENUM_SINGLE(WM8903_AUDIO_INTERFACE_0, 0, 2, companding_text); | |
542 | ||
543 | static const struct soc_enum adc_companding = | |
544 | SOC_ENUM_SINGLE(WM8903_AUDIO_INTERFACE_0, 2, 2, companding_text); | |
545 | ||
546 | static const char *input_mode_text[] = { | |
547 | "Single-Ended", "Differential Line", "Differential Mic" | |
548 | }; | |
549 | ||
550 | static const struct soc_enum linput_mode_enum = | |
551 | SOC_ENUM_SINGLE(WM8903_ANALOGUE_LEFT_INPUT_1, 0, 3, input_mode_text); | |
552 | ||
553 | static const struct soc_enum rinput_mode_enum = | |
554 | SOC_ENUM_SINGLE(WM8903_ANALOGUE_RIGHT_INPUT_1, 0, 3, input_mode_text); | |
555 | ||
556 | static const char *linput_mux_text[] = { | |
557 | "IN1L", "IN2L", "IN3L" | |
558 | }; | |
559 | ||
560 | static const struct soc_enum linput_enum = | |
561 | SOC_ENUM_SINGLE(WM8903_ANALOGUE_LEFT_INPUT_1, 2, 3, linput_mux_text); | |
562 | ||
563 | static const struct soc_enum linput_inv_enum = | |
564 | SOC_ENUM_SINGLE(WM8903_ANALOGUE_LEFT_INPUT_1, 4, 3, linput_mux_text); | |
565 | ||
566 | static const char *rinput_mux_text[] = { | |
567 | "IN1R", "IN2R", "IN3R" | |
568 | }; | |
569 | ||
570 | static const struct soc_enum rinput_enum = | |
571 | SOC_ENUM_SINGLE(WM8903_ANALOGUE_RIGHT_INPUT_1, 2, 3, rinput_mux_text); | |
572 | ||
573 | static const struct soc_enum rinput_inv_enum = | |
574 | SOC_ENUM_SINGLE(WM8903_ANALOGUE_RIGHT_INPUT_1, 4, 3, rinput_mux_text); | |
575 | ||
576 | ||
291ce18c MB |
577 | static const char *sidetone_text[] = { |
578 | "None", "Left", "Right" | |
579 | }; | |
580 | ||
581 | static const struct soc_enum lsidetone_enum = | |
582 | SOC_ENUM_SINGLE(WM8903_DAC_DIGITAL_0, 2, 3, sidetone_text); | |
583 | ||
584 | static const struct soc_enum rsidetone_enum = | |
585 | SOC_ENUM_SINGLE(WM8903_DAC_DIGITAL_0, 0, 3, sidetone_text); | |
586 | ||
f1c0a02f MB |
587 | static const struct snd_kcontrol_new wm8903_snd_controls[] = { |
588 | ||
589 | /* Input PGAs - No TLV since the scale depends on PGA mode */ | |
590 | SOC_SINGLE("Left Input PGA Switch", WM8903_ANALOGUE_LEFT_INPUT_0, | |
5715952b | 591 | 7, 1, 1), |
f1c0a02f MB |
592 | SOC_SINGLE("Left Input PGA Volume", WM8903_ANALOGUE_LEFT_INPUT_0, |
593 | 0, 31, 0), | |
594 | SOC_SINGLE("Left Input PGA Common Mode Switch", WM8903_ANALOGUE_LEFT_INPUT_1, | |
595 | 6, 1, 0), | |
596 | ||
597 | SOC_SINGLE("Right Input PGA Switch", WM8903_ANALOGUE_RIGHT_INPUT_0, | |
5715952b | 598 | 7, 1, 1), |
f1c0a02f MB |
599 | SOC_SINGLE("Right Input PGA Volume", WM8903_ANALOGUE_RIGHT_INPUT_0, |
600 | 0, 31, 0), | |
601 | SOC_SINGLE("Right Input PGA Common Mode Switch", WM8903_ANALOGUE_RIGHT_INPUT_1, | |
602 | 6, 1, 0), | |
603 | ||
604 | /* ADCs */ | |
605 | SOC_SINGLE("DRC Switch", WM8903_DRC_0, 15, 1, 0), | |
606 | SOC_ENUM("DRC Compressor Slope R0", drc_slope_r0), | |
607 | SOC_ENUM("DRC Compressor Slope R1", drc_slope_r1), | |
af901ca1 | 608 | SOC_SINGLE_TLV("DRC Compressor Threshold Volume", WM8903_DRC_3, 5, 124, 1, |
f1c0a02f MB |
609 | drc_tlv_thresh), |
610 | SOC_SINGLE_TLV("DRC Volume", WM8903_DRC_3, 0, 30, 1, drc_tlv_amp), | |
611 | SOC_SINGLE_TLV("DRC Minimum Gain Volume", WM8903_DRC_1, 2, 3, 1, drc_tlv_min), | |
612 | SOC_SINGLE_TLV("DRC Maximum Gain Volume", WM8903_DRC_1, 0, 3, 0, drc_tlv_max), | |
613 | SOC_ENUM("DRC Attack Rate", drc_attack), | |
614 | SOC_ENUM("DRC Decay Rate", drc_decay), | |
615 | SOC_ENUM("DRC FF Delay", drc_ff_delay), | |
616 | SOC_SINGLE("DRC Anticlip Switch", WM8903_DRC_0, 1, 1, 0), | |
617 | SOC_SINGLE("DRC QR Switch", WM8903_DRC_0, 2, 1, 0), | |
af901ca1 | 618 | SOC_SINGLE_TLV("DRC QR Threshold Volume", WM8903_DRC_0, 6, 3, 0, drc_tlv_max), |
f1c0a02f MB |
619 | SOC_ENUM("DRC QR Decay Rate", drc_qr_decay), |
620 | SOC_SINGLE("DRC Smoothing Switch", WM8903_DRC_0, 3, 1, 0), | |
621 | SOC_SINGLE("DRC Smoothing Hysteresis Switch", WM8903_DRC_0, 0, 1, 0), | |
af901ca1 | 622 | SOC_ENUM("DRC Smoothing Threshold", drc_smoothing), |
f1c0a02f MB |
623 | SOC_SINGLE_TLV("DRC Startup Volume", WM8903_DRC_0, 6, 18, 0, drc_tlv_startup), |
624 | ||
625 | SOC_DOUBLE_R_TLV("Digital Capture Volume", WM8903_ADC_DIGITAL_VOLUME_LEFT, | |
626 | WM8903_ADC_DIGITAL_VOLUME_RIGHT, 1, 96, 0, digital_tlv), | |
627 | SOC_ENUM("ADC Companding Mode", adc_companding), | |
628 | SOC_SINGLE("ADC Companding Switch", WM8903_AUDIO_INTERFACE_0, 3, 1, 0), | |
629 | ||
291ce18c MB |
630 | SOC_DOUBLE_TLV("Digital Sidetone Volume", WM8903_DAC_DIGITAL_0, 4, 8, |
631 | 12, 0, digital_sidetone_tlv), | |
632 | ||
f1c0a02f MB |
633 | /* DAC */ |
634 | SOC_DOUBLE_R_TLV("Digital Playback Volume", WM8903_DAC_DIGITAL_VOLUME_LEFT, | |
635 | WM8903_DAC_DIGITAL_VOLUME_RIGHT, 1, 120, 0, digital_tlv), | |
636 | SOC_ENUM("DAC Soft Mute Rate", soft_mute), | |
637 | SOC_ENUM("DAC Mute Mode", mute_mode), | |
638 | SOC_SINGLE("DAC Mono Switch", WM8903_DAC_DIGITAL_1, 12, 1, 0), | |
639 | SOC_ENUM("DAC De-emphasis", dac_deemphasis), | |
f1c0a02f MB |
640 | SOC_ENUM("DAC Companding Mode", dac_companding), |
641 | SOC_SINGLE("DAC Companding Switch", WM8903_AUDIO_INTERFACE_0, 1, 1, 0), | |
642 | ||
643 | /* Headphones */ | |
644 | SOC_DOUBLE_R("Headphone Switch", | |
645 | WM8903_ANALOGUE_OUT1_LEFT, WM8903_ANALOGUE_OUT1_RIGHT, | |
646 | 8, 1, 1), | |
647 | SOC_DOUBLE_R("Headphone ZC Switch", | |
648 | WM8903_ANALOGUE_OUT1_LEFT, WM8903_ANALOGUE_OUT1_RIGHT, | |
649 | 6, 1, 0), | |
650 | SOC_DOUBLE_R_TLV("Headphone Volume", | |
651 | WM8903_ANALOGUE_OUT1_LEFT, WM8903_ANALOGUE_OUT1_RIGHT, | |
652 | 0, 63, 0, out_tlv), | |
653 | ||
654 | /* Line out */ | |
655 | SOC_DOUBLE_R("Line Out Switch", | |
656 | WM8903_ANALOGUE_OUT2_LEFT, WM8903_ANALOGUE_OUT2_RIGHT, | |
657 | 8, 1, 1), | |
658 | SOC_DOUBLE_R("Line Out ZC Switch", | |
659 | WM8903_ANALOGUE_OUT2_LEFT, WM8903_ANALOGUE_OUT2_RIGHT, | |
660 | 6, 1, 0), | |
661 | SOC_DOUBLE_R_TLV("Line Out Volume", | |
662 | WM8903_ANALOGUE_OUT2_LEFT, WM8903_ANALOGUE_OUT2_RIGHT, | |
663 | 0, 63, 0, out_tlv), | |
664 | ||
665 | /* Speaker */ | |
666 | SOC_DOUBLE_R("Speaker Switch", | |
667 | WM8903_ANALOGUE_OUT3_LEFT, WM8903_ANALOGUE_OUT3_RIGHT, 8, 1, 1), | |
668 | SOC_DOUBLE_R("Speaker ZC Switch", | |
669 | WM8903_ANALOGUE_OUT3_LEFT, WM8903_ANALOGUE_OUT3_RIGHT, 6, 1, 0), | |
670 | SOC_DOUBLE_R_TLV("Speaker Volume", | |
671 | WM8903_ANALOGUE_OUT3_LEFT, WM8903_ANALOGUE_OUT3_RIGHT, | |
672 | 0, 63, 0, out_tlv), | |
673 | }; | |
674 | ||
f1c0a02f MB |
675 | static const struct snd_kcontrol_new linput_mode_mux = |
676 | SOC_DAPM_ENUM("Left Input Mode Mux", linput_mode_enum); | |
677 | ||
678 | static const struct snd_kcontrol_new rinput_mode_mux = | |
679 | SOC_DAPM_ENUM("Right Input Mode Mux", rinput_mode_enum); | |
680 | ||
681 | static const struct snd_kcontrol_new linput_mux = | |
682 | SOC_DAPM_ENUM("Left Input Mux", linput_enum); | |
683 | ||
684 | static const struct snd_kcontrol_new linput_inv_mux = | |
685 | SOC_DAPM_ENUM("Left Inverting Input Mux", linput_inv_enum); | |
686 | ||
687 | static const struct snd_kcontrol_new rinput_mux = | |
688 | SOC_DAPM_ENUM("Right Input Mux", rinput_enum); | |
689 | ||
690 | static const struct snd_kcontrol_new rinput_inv_mux = | |
691 | SOC_DAPM_ENUM("Right Inverting Input Mux", rinput_inv_enum); | |
692 | ||
291ce18c MB |
693 | static const struct snd_kcontrol_new lsidetone_mux = |
694 | SOC_DAPM_ENUM("DACL Sidetone Mux", lsidetone_enum); | |
695 | ||
696 | static const struct snd_kcontrol_new rsidetone_mux = | |
697 | SOC_DAPM_ENUM("DACR Sidetone Mux", rsidetone_enum); | |
698 | ||
f1c0a02f MB |
699 | static const struct snd_kcontrol_new left_output_mixer[] = { |
700 | SOC_DAPM_SINGLE("DACL Switch", WM8903_ANALOGUE_LEFT_MIX_0, 3, 1, 0), | |
701 | SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_LEFT_MIX_0, 2, 1, 0), | |
702 | SOC_DAPM_SINGLE_W("Left Bypass Switch", WM8903_ANALOGUE_LEFT_MIX_0, 1, 1, 0), | |
4b4fffdd | 703 | SOC_DAPM_SINGLE_W("Right Bypass Switch", WM8903_ANALOGUE_LEFT_MIX_0, 0, 1, 0), |
f1c0a02f MB |
704 | }; |
705 | ||
706 | static const struct snd_kcontrol_new right_output_mixer[] = { | |
707 | SOC_DAPM_SINGLE("DACL Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 3, 1, 0), | |
708 | SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 2, 1, 0), | |
709 | SOC_DAPM_SINGLE_W("Left Bypass Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 1, 1, 0), | |
4b4fffdd | 710 | SOC_DAPM_SINGLE_W("Right Bypass Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 0, 1, 0), |
f1c0a02f MB |
711 | }; |
712 | ||
713 | static const struct snd_kcontrol_new left_speaker_mixer[] = { | |
714 | SOC_DAPM_SINGLE("DACL Switch", WM8903_ANALOGUE_SPK_MIX_LEFT_0, 3, 1, 0), | |
715 | SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_SPK_MIX_LEFT_0, 2, 1, 0), | |
716 | SOC_DAPM_SINGLE("Left Bypass Switch", WM8903_ANALOGUE_SPK_MIX_LEFT_0, 1, 1, 0), | |
717 | SOC_DAPM_SINGLE("Right Bypass Switch", WM8903_ANALOGUE_SPK_MIX_LEFT_0, | |
4b4fffdd | 718 | 0, 1, 0), |
f1c0a02f MB |
719 | }; |
720 | ||
721 | static const struct snd_kcontrol_new right_speaker_mixer[] = { | |
722 | SOC_DAPM_SINGLE("DACL Switch", WM8903_ANALOGUE_SPK_MIX_RIGHT_0, 3, 1, 0), | |
723 | SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_SPK_MIX_RIGHT_0, 2, 1, 0), | |
724 | SOC_DAPM_SINGLE("Left Bypass Switch", WM8903_ANALOGUE_SPK_MIX_RIGHT_0, | |
725 | 1, 1, 0), | |
726 | SOC_DAPM_SINGLE("Right Bypass Switch", WM8903_ANALOGUE_SPK_MIX_RIGHT_0, | |
4b4fffdd | 727 | 0, 1, 0), |
f1c0a02f MB |
728 | }; |
729 | ||
730 | static const struct snd_soc_dapm_widget wm8903_dapm_widgets[] = { | |
731 | SND_SOC_DAPM_INPUT("IN1L"), | |
732 | SND_SOC_DAPM_INPUT("IN1R"), | |
733 | SND_SOC_DAPM_INPUT("IN2L"), | |
734 | SND_SOC_DAPM_INPUT("IN2R"), | |
735 | SND_SOC_DAPM_INPUT("IN3L"), | |
736 | SND_SOC_DAPM_INPUT("IN3R"), | |
737 | ||
738 | SND_SOC_DAPM_OUTPUT("HPOUTL"), | |
739 | SND_SOC_DAPM_OUTPUT("HPOUTR"), | |
740 | SND_SOC_DAPM_OUTPUT("LINEOUTL"), | |
741 | SND_SOC_DAPM_OUTPUT("LINEOUTR"), | |
742 | SND_SOC_DAPM_OUTPUT("LOP"), | |
743 | SND_SOC_DAPM_OUTPUT("LON"), | |
744 | SND_SOC_DAPM_OUTPUT("ROP"), | |
745 | SND_SOC_DAPM_OUTPUT("RON"), | |
746 | ||
747 | SND_SOC_DAPM_MICBIAS("Mic Bias", WM8903_MIC_BIAS_CONTROL_0, 0, 0), | |
748 | ||
749 | SND_SOC_DAPM_MUX("Left Input Mux", SND_SOC_NOPM, 0, 0, &linput_mux), | |
750 | SND_SOC_DAPM_MUX("Left Input Inverting Mux", SND_SOC_NOPM, 0, 0, | |
751 | &linput_inv_mux), | |
752 | SND_SOC_DAPM_MUX("Left Input Mode Mux", SND_SOC_NOPM, 0, 0, &linput_mode_mux), | |
753 | ||
754 | SND_SOC_DAPM_MUX("Right Input Mux", SND_SOC_NOPM, 0, 0, &rinput_mux), | |
755 | SND_SOC_DAPM_MUX("Right Input Inverting Mux", SND_SOC_NOPM, 0, 0, | |
756 | &rinput_inv_mux), | |
757 | SND_SOC_DAPM_MUX("Right Input Mode Mux", SND_SOC_NOPM, 0, 0, &rinput_mode_mux), | |
758 | ||
759 | SND_SOC_DAPM_PGA("Left Input PGA", WM8903_POWER_MANAGEMENT_0, 1, 0, NULL, 0), | |
760 | SND_SOC_DAPM_PGA("Right Input PGA", WM8903_POWER_MANAGEMENT_0, 0, 0, NULL, 0), | |
761 | ||
762 | SND_SOC_DAPM_ADC("ADCL", "Left HiFi Capture", WM8903_POWER_MANAGEMENT_6, 1, 0), | |
763 | SND_SOC_DAPM_ADC("ADCR", "Right HiFi Capture", WM8903_POWER_MANAGEMENT_6, 0, 0), | |
764 | ||
291ce18c MB |
765 | SND_SOC_DAPM_MUX("DACL Sidetone", SND_SOC_NOPM, 0, 0, &lsidetone_mux), |
766 | SND_SOC_DAPM_MUX("DACR Sidetone", SND_SOC_NOPM, 0, 0, &rsidetone_mux), | |
767 | ||
f1c0a02f MB |
768 | SND_SOC_DAPM_DAC("DACL", "Left Playback", WM8903_POWER_MANAGEMENT_6, 3, 0), |
769 | SND_SOC_DAPM_DAC("DACR", "Right Playback", WM8903_POWER_MANAGEMENT_6, 2, 0), | |
770 | ||
771 | SND_SOC_DAPM_MIXER("Left Output Mixer", WM8903_POWER_MANAGEMENT_1, 1, 0, | |
772 | left_output_mixer, ARRAY_SIZE(left_output_mixer)), | |
773 | SND_SOC_DAPM_MIXER("Right Output Mixer", WM8903_POWER_MANAGEMENT_1, 0, 0, | |
774 | right_output_mixer, ARRAY_SIZE(right_output_mixer)), | |
775 | ||
776 | SND_SOC_DAPM_MIXER("Left Speaker Mixer", WM8903_POWER_MANAGEMENT_4, 1, 0, | |
777 | left_speaker_mixer, ARRAY_SIZE(left_speaker_mixer)), | |
778 | SND_SOC_DAPM_MIXER("Right Speaker Mixer", WM8903_POWER_MANAGEMENT_4, 0, 0, | |
779 | right_speaker_mixer, ARRAY_SIZE(right_speaker_mixer)), | |
780 | ||
781 | SND_SOC_DAPM_PGA_E("Left Headphone Output PGA", WM8903_POWER_MANAGEMENT_2, | |
782 | 1, 0, NULL, 0, wm8903_output_event, | |
783 | SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU | | |
42768a12 | 784 | SND_SOC_DAPM_PRE_PMD), |
f1c0a02f MB |
785 | SND_SOC_DAPM_PGA_E("Right Headphone Output PGA", WM8903_POWER_MANAGEMENT_2, |
786 | 0, 0, NULL, 0, wm8903_output_event, | |
787 | SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU | | |
42768a12 | 788 | SND_SOC_DAPM_PRE_PMD), |
f1c0a02f MB |
789 | |
790 | SND_SOC_DAPM_PGA_E("Left Line Output PGA", WM8903_POWER_MANAGEMENT_3, 1, 0, | |
791 | NULL, 0, wm8903_output_event, | |
792 | SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU | | |
42768a12 | 793 | SND_SOC_DAPM_PRE_PMD), |
f1c0a02f MB |
794 | SND_SOC_DAPM_PGA_E("Right Line Output PGA", WM8903_POWER_MANAGEMENT_3, 0, 0, |
795 | NULL, 0, wm8903_output_event, | |
796 | SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU | | |
42768a12 | 797 | SND_SOC_DAPM_PRE_PMD), |
f1c0a02f MB |
798 | |
799 | SND_SOC_DAPM_PGA("Left Speaker PGA", WM8903_POWER_MANAGEMENT_5, 1, 0, | |
800 | NULL, 0), | |
801 | SND_SOC_DAPM_PGA("Right Speaker PGA", WM8903_POWER_MANAGEMENT_5, 0, 0, | |
802 | NULL, 0), | |
803 | ||
42768a12 MB |
804 | SND_SOC_DAPM_SUPPLY("Charge Pump", WM8903_CHARGE_PUMP_0, 0, 0, |
805 | wm8903_cp_event, SND_SOC_DAPM_POST_PMU), | |
c2aef4ff | 806 | SND_SOC_DAPM_SUPPLY("CLK_DSP", WM8903_CLOCK_RATES_2, 1, 0, NULL, 0), |
f1c0a02f MB |
807 | }; |
808 | ||
809 | static const struct snd_soc_dapm_route intercon[] = { | |
810 | ||
811 | { "Left Input Mux", "IN1L", "IN1L" }, | |
812 | { "Left Input Mux", "IN2L", "IN2L" }, | |
813 | { "Left Input Mux", "IN3L", "IN3L" }, | |
814 | ||
815 | { "Left Input Inverting Mux", "IN1L", "IN1L" }, | |
816 | { "Left Input Inverting Mux", "IN2L", "IN2L" }, | |
817 | { "Left Input Inverting Mux", "IN3L", "IN3L" }, | |
818 | ||
819 | { "Right Input Mux", "IN1R", "IN1R" }, | |
820 | { "Right Input Mux", "IN2R", "IN2R" }, | |
821 | { "Right Input Mux", "IN3R", "IN3R" }, | |
822 | ||
823 | { "Right Input Inverting Mux", "IN1R", "IN1R" }, | |
824 | { "Right Input Inverting Mux", "IN2R", "IN2R" }, | |
825 | { "Right Input Inverting Mux", "IN3R", "IN3R" }, | |
826 | ||
827 | { "Left Input Mode Mux", "Single-Ended", "Left Input Inverting Mux" }, | |
828 | { "Left Input Mode Mux", "Differential Line", | |
829 | "Left Input Mux" }, | |
830 | { "Left Input Mode Mux", "Differential Line", | |
831 | "Left Input Inverting Mux" }, | |
832 | { "Left Input Mode Mux", "Differential Mic", | |
833 | "Left Input Mux" }, | |
834 | { "Left Input Mode Mux", "Differential Mic", | |
835 | "Left Input Inverting Mux" }, | |
836 | ||
837 | { "Right Input Mode Mux", "Single-Ended", | |
838 | "Right Input Inverting Mux" }, | |
839 | { "Right Input Mode Mux", "Differential Line", | |
840 | "Right Input Mux" }, | |
841 | { "Right Input Mode Mux", "Differential Line", | |
842 | "Right Input Inverting Mux" }, | |
843 | { "Right Input Mode Mux", "Differential Mic", | |
844 | "Right Input Mux" }, | |
845 | { "Right Input Mode Mux", "Differential Mic", | |
846 | "Right Input Inverting Mux" }, | |
847 | ||
848 | { "Left Input PGA", NULL, "Left Input Mode Mux" }, | |
849 | { "Right Input PGA", NULL, "Right Input Mode Mux" }, | |
850 | ||
851 | { "ADCL", NULL, "Left Input PGA" }, | |
c2aef4ff | 852 | { "ADCL", NULL, "CLK_DSP" }, |
f1c0a02f | 853 | { "ADCR", NULL, "Right Input PGA" }, |
c2aef4ff MB |
854 | { "ADCR", NULL, "CLK_DSP" }, |
855 | ||
291ce18c MB |
856 | { "DACL Sidetone", "Left", "ADCL" }, |
857 | { "DACL Sidetone", "Right", "ADCR" }, | |
858 | { "DACR Sidetone", "Left", "ADCL" }, | |
859 | { "DACR Sidetone", "Right", "ADCR" }, | |
860 | ||
861 | { "DACL", NULL, "DACL Sidetone" }, | |
c2aef4ff | 862 | { "DACL", NULL, "CLK_DSP" }, |
291ce18c | 863 | { "DACR", NULL, "DACR Sidetone" }, |
c2aef4ff | 864 | { "DACR", NULL, "CLK_DSP" }, |
f1c0a02f MB |
865 | |
866 | { "Left Output Mixer", "Left Bypass Switch", "Left Input PGA" }, | |
867 | { "Left Output Mixer", "Right Bypass Switch", "Right Input PGA" }, | |
868 | { "Left Output Mixer", "DACL Switch", "DACL" }, | |
869 | { "Left Output Mixer", "DACR Switch", "DACR" }, | |
870 | ||
871 | { "Right Output Mixer", "Left Bypass Switch", "Left Input PGA" }, | |
872 | { "Right Output Mixer", "Right Bypass Switch", "Right Input PGA" }, | |
873 | { "Right Output Mixer", "DACL Switch", "DACL" }, | |
874 | { "Right Output Mixer", "DACR Switch", "DACR" }, | |
875 | ||
876 | { "Left Speaker Mixer", "Left Bypass Switch", "Left Input PGA" }, | |
877 | { "Left Speaker Mixer", "Right Bypass Switch", "Right Input PGA" }, | |
878 | { "Left Speaker Mixer", "DACL Switch", "DACL" }, | |
879 | { "Left Speaker Mixer", "DACR Switch", "DACR" }, | |
880 | ||
881 | { "Right Speaker Mixer", "Left Bypass Switch", "Left Input PGA" }, | |
882 | { "Right Speaker Mixer", "Right Bypass Switch", "Right Input PGA" }, | |
883 | { "Right Speaker Mixer", "DACL Switch", "DACL" }, | |
884 | { "Right Speaker Mixer", "DACR Switch", "DACR" }, | |
885 | ||
886 | { "Left Line Output PGA", NULL, "Left Output Mixer" }, | |
887 | { "Right Line Output PGA", NULL, "Right Output Mixer" }, | |
888 | ||
889 | { "Left Headphone Output PGA", NULL, "Left Output Mixer" }, | |
890 | { "Right Headphone Output PGA", NULL, "Right Output Mixer" }, | |
891 | ||
892 | { "Left Speaker PGA", NULL, "Left Speaker Mixer" }, | |
893 | { "Right Speaker PGA", NULL, "Right Speaker Mixer" }, | |
894 | ||
895 | { "HPOUTL", NULL, "Left Headphone Output PGA" }, | |
896 | { "HPOUTR", NULL, "Right Headphone Output PGA" }, | |
897 | ||
898 | { "LINEOUTL", NULL, "Left Line Output PGA" }, | |
899 | { "LINEOUTR", NULL, "Right Line Output PGA" }, | |
900 | ||
901 | { "LOP", NULL, "Left Speaker PGA" }, | |
902 | { "LON", NULL, "Left Speaker PGA" }, | |
903 | ||
904 | { "ROP", NULL, "Right Speaker PGA" }, | |
905 | { "RON", NULL, "Right Speaker PGA" }, | |
42768a12 MB |
906 | |
907 | { "Left Headphone Output PGA", NULL, "Charge Pump" }, | |
908 | { "Right Headphone Output PGA", NULL, "Charge Pump" }, | |
909 | { "Left Line Output PGA", NULL, "Charge Pump" }, | |
910 | { "Right Line Output PGA", NULL, "Charge Pump" }, | |
f1c0a02f MB |
911 | }; |
912 | ||
913 | static int wm8903_add_widgets(struct snd_soc_codec *codec) | |
914 | { | |
915 | snd_soc_dapm_new_controls(codec, wm8903_dapm_widgets, | |
916 | ARRAY_SIZE(wm8903_dapm_widgets)); | |
917 | ||
918 | snd_soc_dapm_add_routes(codec, intercon, ARRAY_SIZE(intercon)); | |
919 | ||
f1c0a02f MB |
920 | return 0; |
921 | } | |
922 | ||
923 | static int wm8903_set_bias_level(struct snd_soc_codec *codec, | |
924 | enum snd_soc_bias_level level) | |
925 | { | |
926 | struct i2c_client *i2c = codec->control_data; | |
927 | u16 reg, reg2; | |
928 | ||
929 | switch (level) { | |
930 | case SND_SOC_BIAS_ON: | |
931 | case SND_SOC_BIAS_PREPARE: | |
8d50e447 | 932 | reg = snd_soc_read(codec, WM8903_VMID_CONTROL_0); |
f1c0a02f MB |
933 | reg &= ~(WM8903_VMID_RES_MASK); |
934 | reg |= WM8903_VMID_RES_50K; | |
8d50e447 | 935 | snd_soc_write(codec, WM8903_VMID_CONTROL_0, reg); |
f1c0a02f MB |
936 | break; |
937 | ||
938 | case SND_SOC_BIAS_STANDBY: | |
939 | if (codec->bias_level == SND_SOC_BIAS_OFF) { | |
8d50e447 | 940 | snd_soc_write(codec, WM8903_CLOCK_RATES_2, |
3b1228ab MB |
941 | WM8903_CLK_SYS_ENA); |
942 | ||
4dbfe809 | 943 | /* Change DC servo dither level in startup sequence */ |
8d50e447 MB |
944 | snd_soc_write(codec, WM8903_WRITE_SEQUENCER_0, 0x11); |
945 | snd_soc_write(codec, WM8903_WRITE_SEQUENCER_1, 0x1257); | |
946 | snd_soc_write(codec, WM8903_WRITE_SEQUENCER_2, 0x2); | |
4dbfe809 | 947 | |
f1c0a02f MB |
948 | wm8903_run_sequence(codec, 0); |
949 | wm8903_sync_reg_cache(codec, codec->reg_cache); | |
950 | ||
951 | /* Enable low impedence charge pump output */ | |
8d50e447 | 952 | reg = snd_soc_read(codec, |
f1c0a02f | 953 | WM8903_CONTROL_INTERFACE_TEST_1); |
8d50e447 | 954 | snd_soc_write(codec, WM8903_CONTROL_INTERFACE_TEST_1, |
f1c0a02f | 955 | reg | WM8903_TEST_KEY); |
8d50e447 MB |
956 | reg2 = snd_soc_read(codec, WM8903_CHARGE_PUMP_TEST_1); |
957 | snd_soc_write(codec, WM8903_CHARGE_PUMP_TEST_1, | |
f1c0a02f | 958 | reg2 | WM8903_CP_SW_KELVIN_MODE_MASK); |
8d50e447 | 959 | snd_soc_write(codec, WM8903_CONTROL_INTERFACE_TEST_1, |
f1c0a02f MB |
960 | reg); |
961 | ||
962 | /* By default no bypass paths are enabled so | |
963 | * enable Class W support. | |
964 | */ | |
965 | dev_dbg(&i2c->dev, "Enabling Class W\n"); | |
8d50e447 | 966 | snd_soc_write(codec, WM8903_CLASS_W_0, reg | |
f1c0a02f MB |
967 | WM8903_CP_DYN_FREQ | WM8903_CP_DYN_V); |
968 | } | |
969 | ||
8d50e447 | 970 | reg = snd_soc_read(codec, WM8903_VMID_CONTROL_0); |
f1c0a02f MB |
971 | reg &= ~(WM8903_VMID_RES_MASK); |
972 | reg |= WM8903_VMID_RES_250K; | |
8d50e447 | 973 | snd_soc_write(codec, WM8903_VMID_CONTROL_0, reg); |
f1c0a02f MB |
974 | break; |
975 | ||
976 | case SND_SOC_BIAS_OFF: | |
977 | wm8903_run_sequence(codec, 32); | |
8d50e447 | 978 | reg = snd_soc_read(codec, WM8903_CLOCK_RATES_2); |
3b1228ab | 979 | reg &= ~WM8903_CLK_SYS_ENA; |
8d50e447 | 980 | snd_soc_write(codec, WM8903_CLOCK_RATES_2, reg); |
f1c0a02f MB |
981 | break; |
982 | } | |
983 | ||
984 | codec->bias_level = level; | |
985 | ||
986 | return 0; | |
987 | } | |
988 | ||
989 | static int wm8903_set_dai_sysclk(struct snd_soc_dai *codec_dai, | |
990 | int clk_id, unsigned int freq, int dir) | |
991 | { | |
992 | struct snd_soc_codec *codec = codec_dai->codec; | |
993 | struct wm8903_priv *wm8903 = codec->private_data; | |
994 | ||
995 | wm8903->sysclk = freq; | |
996 | ||
997 | return 0; | |
998 | } | |
999 | ||
1000 | static int wm8903_set_dai_fmt(struct snd_soc_dai *codec_dai, | |
1001 | unsigned int fmt) | |
1002 | { | |
1003 | struct snd_soc_codec *codec = codec_dai->codec; | |
8d50e447 | 1004 | u16 aif1 = snd_soc_read(codec, WM8903_AUDIO_INTERFACE_1); |
f1c0a02f MB |
1005 | |
1006 | aif1 &= ~(WM8903_LRCLK_DIR | WM8903_BCLK_DIR | WM8903_AIF_FMT_MASK | | |
1007 | WM8903_AIF_LRCLK_INV | WM8903_AIF_BCLK_INV); | |
1008 | ||
1009 | switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { | |
1010 | case SND_SOC_DAIFMT_CBS_CFS: | |
1011 | break; | |
1012 | case SND_SOC_DAIFMT_CBS_CFM: | |
1013 | aif1 |= WM8903_LRCLK_DIR; | |
1014 | break; | |
1015 | case SND_SOC_DAIFMT_CBM_CFM: | |
1016 | aif1 |= WM8903_LRCLK_DIR | WM8903_BCLK_DIR; | |
1017 | break; | |
1018 | case SND_SOC_DAIFMT_CBM_CFS: | |
1019 | aif1 |= WM8903_BCLK_DIR; | |
1020 | break; | |
1021 | default: | |
1022 | return -EINVAL; | |
1023 | } | |
1024 | ||
1025 | switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { | |
1026 | case SND_SOC_DAIFMT_DSP_A: | |
1027 | aif1 |= 0x3; | |
1028 | break; | |
1029 | case SND_SOC_DAIFMT_DSP_B: | |
1030 | aif1 |= 0x3 | WM8903_AIF_LRCLK_INV; | |
1031 | break; | |
1032 | case SND_SOC_DAIFMT_I2S: | |
1033 | aif1 |= 0x2; | |
1034 | break; | |
1035 | case SND_SOC_DAIFMT_RIGHT_J: | |
1036 | aif1 |= 0x1; | |
1037 | break; | |
1038 | case SND_SOC_DAIFMT_LEFT_J: | |
1039 | break; | |
1040 | default: | |
1041 | return -EINVAL; | |
1042 | } | |
1043 | ||
1044 | /* Clock inversion */ | |
1045 | switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { | |
1046 | case SND_SOC_DAIFMT_DSP_A: | |
1047 | case SND_SOC_DAIFMT_DSP_B: | |
1048 | /* frame inversion not valid for DSP modes */ | |
1049 | switch (fmt & SND_SOC_DAIFMT_INV_MASK) { | |
1050 | case SND_SOC_DAIFMT_NB_NF: | |
1051 | break; | |
1052 | case SND_SOC_DAIFMT_IB_NF: | |
1053 | aif1 |= WM8903_AIF_BCLK_INV; | |
1054 | break; | |
1055 | default: | |
1056 | return -EINVAL; | |
1057 | } | |
1058 | break; | |
1059 | case SND_SOC_DAIFMT_I2S: | |
1060 | case SND_SOC_DAIFMT_RIGHT_J: | |
1061 | case SND_SOC_DAIFMT_LEFT_J: | |
1062 | switch (fmt & SND_SOC_DAIFMT_INV_MASK) { | |
1063 | case SND_SOC_DAIFMT_NB_NF: | |
1064 | break; | |
1065 | case SND_SOC_DAIFMT_IB_IF: | |
1066 | aif1 |= WM8903_AIF_BCLK_INV | WM8903_AIF_LRCLK_INV; | |
1067 | break; | |
1068 | case SND_SOC_DAIFMT_IB_NF: | |
1069 | aif1 |= WM8903_AIF_BCLK_INV; | |
1070 | break; | |
1071 | case SND_SOC_DAIFMT_NB_IF: | |
1072 | aif1 |= WM8903_AIF_LRCLK_INV; | |
1073 | break; | |
1074 | default: | |
1075 | return -EINVAL; | |
1076 | } | |
1077 | break; | |
1078 | default: | |
1079 | return -EINVAL; | |
1080 | } | |
1081 | ||
8d50e447 | 1082 | snd_soc_write(codec, WM8903_AUDIO_INTERFACE_1, aif1); |
f1c0a02f MB |
1083 | |
1084 | return 0; | |
1085 | } | |
1086 | ||
1087 | static int wm8903_digital_mute(struct snd_soc_dai *codec_dai, int mute) | |
1088 | { | |
1089 | struct snd_soc_codec *codec = codec_dai->codec; | |
1090 | u16 reg; | |
1091 | ||
8d50e447 | 1092 | reg = snd_soc_read(codec, WM8903_DAC_DIGITAL_1); |
f1c0a02f MB |
1093 | |
1094 | if (mute) | |
1095 | reg |= WM8903_DAC_MUTE; | |
1096 | else | |
1097 | reg &= ~WM8903_DAC_MUTE; | |
1098 | ||
8d50e447 | 1099 | snd_soc_write(codec, WM8903_DAC_DIGITAL_1, reg); |
f1c0a02f MB |
1100 | |
1101 | return 0; | |
1102 | } | |
1103 | ||
1104 | /* Lookup table for CLK_SYS/fs ratio. 256fs or more is recommended | |
1105 | * for optimal performance so we list the lower rates first and match | |
1106 | * on the last match we find. */ | |
1107 | static struct { | |
1108 | int div; | |
1109 | int rate; | |
1110 | int mode; | |
1111 | int mclk_div; | |
1112 | } clk_sys_ratios[] = { | |
1113 | { 64, 0x0, 0x0, 1 }, | |
1114 | { 68, 0x0, 0x1, 1 }, | |
1115 | { 125, 0x0, 0x2, 1 }, | |
1116 | { 128, 0x1, 0x0, 1 }, | |
1117 | { 136, 0x1, 0x1, 1 }, | |
1118 | { 192, 0x2, 0x0, 1 }, | |
1119 | { 204, 0x2, 0x1, 1 }, | |
1120 | ||
1121 | { 64, 0x0, 0x0, 2 }, | |
1122 | { 68, 0x0, 0x1, 2 }, | |
1123 | { 125, 0x0, 0x2, 2 }, | |
1124 | { 128, 0x1, 0x0, 2 }, | |
1125 | { 136, 0x1, 0x1, 2 }, | |
1126 | { 192, 0x2, 0x0, 2 }, | |
1127 | { 204, 0x2, 0x1, 2 }, | |
1128 | ||
1129 | { 250, 0x2, 0x2, 1 }, | |
1130 | { 256, 0x3, 0x0, 1 }, | |
1131 | { 272, 0x3, 0x1, 1 }, | |
1132 | { 384, 0x4, 0x0, 1 }, | |
1133 | { 408, 0x4, 0x1, 1 }, | |
1134 | { 375, 0x4, 0x2, 1 }, | |
1135 | { 512, 0x5, 0x0, 1 }, | |
1136 | { 544, 0x5, 0x1, 1 }, | |
1137 | { 500, 0x5, 0x2, 1 }, | |
1138 | { 768, 0x6, 0x0, 1 }, | |
1139 | { 816, 0x6, 0x1, 1 }, | |
1140 | { 750, 0x6, 0x2, 1 }, | |
1141 | { 1024, 0x7, 0x0, 1 }, | |
1142 | { 1088, 0x7, 0x1, 1 }, | |
1143 | { 1000, 0x7, 0x2, 1 }, | |
1144 | { 1408, 0x8, 0x0, 1 }, | |
1145 | { 1496, 0x8, 0x1, 1 }, | |
1146 | { 1536, 0x9, 0x0, 1 }, | |
1147 | { 1632, 0x9, 0x1, 1 }, | |
1148 | { 1500, 0x9, 0x2, 1 }, | |
1149 | ||
1150 | { 250, 0x2, 0x2, 2 }, | |
1151 | { 256, 0x3, 0x0, 2 }, | |
1152 | { 272, 0x3, 0x1, 2 }, | |
1153 | { 384, 0x4, 0x0, 2 }, | |
1154 | { 408, 0x4, 0x1, 2 }, | |
1155 | { 375, 0x4, 0x2, 2 }, | |
1156 | { 512, 0x5, 0x0, 2 }, | |
1157 | { 544, 0x5, 0x1, 2 }, | |
1158 | { 500, 0x5, 0x2, 2 }, | |
1159 | { 768, 0x6, 0x0, 2 }, | |
1160 | { 816, 0x6, 0x1, 2 }, | |
1161 | { 750, 0x6, 0x2, 2 }, | |
1162 | { 1024, 0x7, 0x0, 2 }, | |
1163 | { 1088, 0x7, 0x1, 2 }, | |
1164 | { 1000, 0x7, 0x2, 2 }, | |
1165 | { 1408, 0x8, 0x0, 2 }, | |
1166 | { 1496, 0x8, 0x1, 2 }, | |
1167 | { 1536, 0x9, 0x0, 2 }, | |
1168 | { 1632, 0x9, 0x1, 2 }, | |
1169 | { 1500, 0x9, 0x2, 2 }, | |
1170 | }; | |
1171 | ||
1172 | /* CLK_SYS/BCLK ratios - multiplied by 10 due to .5s */ | |
1173 | static struct { | |
1174 | int ratio; | |
1175 | int div; | |
1176 | } bclk_divs[] = { | |
1177 | { 10, 0 }, | |
f1c0a02f MB |
1178 | { 20, 2 }, |
1179 | { 30, 3 }, | |
1180 | { 40, 4 }, | |
1181 | { 50, 5 }, | |
f1c0a02f MB |
1182 | { 60, 7 }, |
1183 | { 80, 8 }, | |
1184 | { 100, 9 }, | |
f1c0a02f MB |
1185 | { 120, 11 }, |
1186 | { 160, 12 }, | |
1187 | { 200, 13 }, | |
1188 | { 220, 14 }, | |
1189 | { 240, 15 }, | |
f1c0a02f MB |
1190 | { 300, 17 }, |
1191 | { 320, 18 }, | |
1192 | { 440, 19 }, | |
1193 | { 480, 20 }, | |
1194 | }; | |
1195 | ||
1196 | /* Sample rates for DSP */ | |
1197 | static struct { | |
1198 | int rate; | |
1199 | int value; | |
1200 | } sample_rates[] = { | |
1201 | { 8000, 0 }, | |
1202 | { 11025, 1 }, | |
1203 | { 12000, 2 }, | |
1204 | { 16000, 3 }, | |
1205 | { 22050, 4 }, | |
1206 | { 24000, 5 }, | |
1207 | { 32000, 6 }, | |
1208 | { 44100, 7 }, | |
1209 | { 48000, 8 }, | |
1210 | { 88200, 9 }, | |
1211 | { 96000, 10 }, | |
1212 | { 0, 0 }, | |
1213 | }; | |
1214 | ||
dee89c4d MB |
1215 | static int wm8903_startup(struct snd_pcm_substream *substream, |
1216 | struct snd_soc_dai *dai) | |
f1c0a02f MB |
1217 | { |
1218 | struct snd_soc_pcm_runtime *rtd = substream->private_data; | |
1219 | struct snd_soc_device *socdev = rtd->socdev; | |
6627a653 | 1220 | struct snd_soc_codec *codec = socdev->card->codec; |
f1c0a02f MB |
1221 | struct wm8903_priv *wm8903 = codec->private_data; |
1222 | struct i2c_client *i2c = codec->control_data; | |
1223 | struct snd_pcm_runtime *master_runtime; | |
1224 | ||
1225 | if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) | |
1226 | wm8903->playback_active++; | |
1227 | else | |
1228 | wm8903->capture_active++; | |
1229 | ||
1230 | /* The DAI has shared clocks so if we already have a playback or | |
1231 | * capture going then constrain this substream to match it. | |
1232 | */ | |
1233 | if (wm8903->master_substream) { | |
1234 | master_runtime = wm8903->master_substream->runtime; | |
1235 | ||
727fb909 MB |
1236 | dev_dbg(&i2c->dev, "Constraining to %d bits\n", |
1237 | master_runtime->sample_bits); | |
f1c0a02f MB |
1238 | |
1239 | snd_pcm_hw_constraint_minmax(substream->runtime, | |
1240 | SNDRV_PCM_HW_PARAM_SAMPLE_BITS, | |
1241 | master_runtime->sample_bits, | |
1242 | master_runtime->sample_bits); | |
1243 | ||
1244 | wm8903->slave_substream = substream; | |
1245 | } else | |
1246 | wm8903->master_substream = substream; | |
1247 | ||
1248 | return 0; | |
1249 | } | |
1250 | ||
dee89c4d MB |
1251 | static void wm8903_shutdown(struct snd_pcm_substream *substream, |
1252 | struct snd_soc_dai *dai) | |
f1c0a02f MB |
1253 | { |
1254 | struct snd_soc_pcm_runtime *rtd = substream->private_data; | |
1255 | struct snd_soc_device *socdev = rtd->socdev; | |
6627a653 | 1256 | struct snd_soc_codec *codec = socdev->card->codec; |
f1c0a02f MB |
1257 | struct wm8903_priv *wm8903 = codec->private_data; |
1258 | ||
1259 | if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) | |
1260 | wm8903->playback_active--; | |
1261 | else | |
1262 | wm8903->capture_active--; | |
1263 | ||
1264 | if (wm8903->master_substream == substream) | |
1265 | wm8903->master_substream = wm8903->slave_substream; | |
1266 | ||
1267 | wm8903->slave_substream = NULL; | |
1268 | } | |
1269 | ||
1270 | static int wm8903_hw_params(struct snd_pcm_substream *substream, | |
dee89c4d MB |
1271 | struct snd_pcm_hw_params *params, |
1272 | struct snd_soc_dai *dai) | |
f1c0a02f MB |
1273 | { |
1274 | struct snd_soc_pcm_runtime *rtd = substream->private_data; | |
1275 | struct snd_soc_device *socdev = rtd->socdev; | |
6627a653 | 1276 | struct snd_soc_codec *codec = socdev->card->codec; |
f1c0a02f MB |
1277 | struct wm8903_priv *wm8903 = codec->private_data; |
1278 | struct i2c_client *i2c = codec->control_data; | |
1279 | int fs = params_rate(params); | |
1280 | int bclk; | |
1281 | int bclk_div; | |
1282 | int i; | |
1283 | int dsp_config; | |
1284 | int clk_config; | |
1285 | int best_val; | |
1286 | int cur_val; | |
1287 | int clk_sys; | |
1288 | ||
8d50e447 MB |
1289 | u16 aif1 = snd_soc_read(codec, WM8903_AUDIO_INTERFACE_1); |
1290 | u16 aif2 = snd_soc_read(codec, WM8903_AUDIO_INTERFACE_2); | |
1291 | u16 aif3 = snd_soc_read(codec, WM8903_AUDIO_INTERFACE_3); | |
1292 | u16 clock0 = snd_soc_read(codec, WM8903_CLOCK_RATES_0); | |
1293 | u16 clock1 = snd_soc_read(codec, WM8903_CLOCK_RATES_1); | |
1294 | u16 dac_digital1 = snd_soc_read(codec, WM8903_DAC_DIGITAL_1); | |
f1c0a02f MB |
1295 | |
1296 | if (substream == wm8903->slave_substream) { | |
1297 | dev_dbg(&i2c->dev, "Ignoring hw_params for slave substream\n"); | |
1298 | return 0; | |
1299 | } | |
1300 | ||
9e79261f MB |
1301 | /* Enable sloping stopband filter for low sample rates */ |
1302 | if (fs <= 24000) | |
1303 | dac_digital1 |= WM8903_DAC_SB_FILT; | |
1304 | else | |
1305 | dac_digital1 &= ~WM8903_DAC_SB_FILT; | |
1306 | ||
f1c0a02f MB |
1307 | /* Configure sample rate logic for DSP - choose nearest rate */ |
1308 | dsp_config = 0; | |
1309 | best_val = abs(sample_rates[dsp_config].rate - fs); | |
1310 | for (i = 1; i < ARRAY_SIZE(sample_rates); i++) { | |
1311 | cur_val = abs(sample_rates[i].rate - fs); | |
1312 | if (cur_val <= best_val) { | |
1313 | dsp_config = i; | |
1314 | best_val = cur_val; | |
1315 | } | |
1316 | } | |
1317 | ||
1318 | /* Constraints should stop us hitting this but let's make sure */ | |
1319 | if (wm8903->capture_active) | |
1320 | switch (sample_rates[dsp_config].rate) { | |
1321 | case 88200: | |
1322 | case 96000: | |
1323 | dev_err(&i2c->dev, "%dHz unsupported by ADC\n", | |
1324 | fs); | |
1325 | return -EINVAL; | |
1326 | ||
1327 | default: | |
1328 | break; | |
1329 | } | |
1330 | ||
1331 | dev_dbg(&i2c->dev, "DSP fs = %dHz\n", sample_rates[dsp_config].rate); | |
1332 | clock1 &= ~WM8903_SAMPLE_RATE_MASK; | |
1333 | clock1 |= sample_rates[dsp_config].value; | |
1334 | ||
1335 | aif1 &= ~WM8903_AIF_WL_MASK; | |
1336 | bclk = 2 * fs; | |
1337 | switch (params_format(params)) { | |
1338 | case SNDRV_PCM_FORMAT_S16_LE: | |
1339 | bclk *= 16; | |
1340 | break; | |
1341 | case SNDRV_PCM_FORMAT_S20_3LE: | |
1342 | bclk *= 20; | |
1343 | aif1 |= 0x4; | |
1344 | break; | |
1345 | case SNDRV_PCM_FORMAT_S24_LE: | |
1346 | bclk *= 24; | |
1347 | aif1 |= 0x8; | |
1348 | break; | |
1349 | case SNDRV_PCM_FORMAT_S32_LE: | |
1350 | bclk *= 32; | |
1351 | aif1 |= 0xc; | |
1352 | break; | |
1353 | default: | |
1354 | return -EINVAL; | |
1355 | } | |
1356 | ||
1357 | dev_dbg(&i2c->dev, "MCLK = %dHz, target sample rate = %dHz\n", | |
1358 | wm8903->sysclk, fs); | |
1359 | ||
1360 | /* We may not have an MCLK which allows us to generate exactly | |
1361 | * the clock we want, particularly with USB derived inputs, so | |
1362 | * approximate. | |
1363 | */ | |
1364 | clk_config = 0; | |
1365 | best_val = abs((wm8903->sysclk / | |
1366 | (clk_sys_ratios[0].mclk_div * | |
1367 | clk_sys_ratios[0].div)) - fs); | |
1368 | for (i = 1; i < ARRAY_SIZE(clk_sys_ratios); i++) { | |
1369 | cur_val = abs((wm8903->sysclk / | |
1370 | (clk_sys_ratios[i].mclk_div * | |
1371 | clk_sys_ratios[i].div)) - fs); | |
1372 | ||
1373 | if (cur_val <= best_val) { | |
1374 | clk_config = i; | |
1375 | best_val = cur_val; | |
1376 | } | |
1377 | } | |
1378 | ||
1379 | if (clk_sys_ratios[clk_config].mclk_div == 2) { | |
1380 | clock0 |= WM8903_MCLKDIV2; | |
1381 | clk_sys = wm8903->sysclk / 2; | |
1382 | } else { | |
1383 | clock0 &= ~WM8903_MCLKDIV2; | |
1384 | clk_sys = wm8903->sysclk; | |
1385 | } | |
1386 | ||
1387 | clock1 &= ~(WM8903_CLK_SYS_RATE_MASK | | |
1388 | WM8903_CLK_SYS_MODE_MASK); | |
1389 | clock1 |= clk_sys_ratios[clk_config].rate << WM8903_CLK_SYS_RATE_SHIFT; | |
1390 | clock1 |= clk_sys_ratios[clk_config].mode << WM8903_CLK_SYS_MODE_SHIFT; | |
1391 | ||
1392 | dev_dbg(&i2c->dev, "CLK_SYS_RATE=%x, CLK_SYS_MODE=%x div=%d\n", | |
1393 | clk_sys_ratios[clk_config].rate, | |
1394 | clk_sys_ratios[clk_config].mode, | |
1395 | clk_sys_ratios[clk_config].div); | |
1396 | ||
1397 | dev_dbg(&i2c->dev, "Actual CLK_SYS = %dHz\n", clk_sys); | |
1398 | ||
1399 | /* We may not get quite the right frequency if using | |
1400 | * approximate clocks so look for the closest match that is | |
1401 | * higher than the target (we need to ensure that there enough | |
1402 | * BCLKs to clock out the samples). | |
1403 | */ | |
1404 | bclk_div = 0; | |
1405 | best_val = ((clk_sys * 10) / bclk_divs[0].ratio) - bclk; | |
1406 | i = 1; | |
1407 | while (i < ARRAY_SIZE(bclk_divs)) { | |
1408 | cur_val = ((clk_sys * 10) / bclk_divs[i].ratio) - bclk; | |
1409 | if (cur_val < 0) /* BCLK table is sorted */ | |
1410 | break; | |
1411 | bclk_div = i; | |
1412 | best_val = cur_val; | |
1413 | i++; | |
1414 | } | |
1415 | ||
1416 | aif2 &= ~WM8903_BCLK_DIV_MASK; | |
1417 | aif3 &= ~WM8903_LRCLK_RATE_MASK; | |
1418 | ||
1419 | dev_dbg(&i2c->dev, "BCLK ratio %d for %dHz - actual BCLK = %dHz\n", | |
1420 | bclk_divs[bclk_div].ratio / 10, bclk, | |
1421 | (clk_sys * 10) / bclk_divs[bclk_div].ratio); | |
1422 | ||
1423 | aif2 |= bclk_divs[bclk_div].div; | |
1424 | aif3 |= bclk / fs; | |
1425 | ||
8d50e447 MB |
1426 | snd_soc_write(codec, WM8903_CLOCK_RATES_0, clock0); |
1427 | snd_soc_write(codec, WM8903_CLOCK_RATES_1, clock1); | |
1428 | snd_soc_write(codec, WM8903_AUDIO_INTERFACE_1, aif1); | |
1429 | snd_soc_write(codec, WM8903_AUDIO_INTERFACE_2, aif2); | |
1430 | snd_soc_write(codec, WM8903_AUDIO_INTERFACE_3, aif3); | |
1431 | snd_soc_write(codec, WM8903_DAC_DIGITAL_1, dac_digital1); | |
f1c0a02f MB |
1432 | |
1433 | return 0; | |
1434 | } | |
1435 | ||
1436 | #define WM8903_PLAYBACK_RATES (SNDRV_PCM_RATE_8000 |\ | |
1437 | SNDRV_PCM_RATE_11025 | \ | |
1438 | SNDRV_PCM_RATE_16000 | \ | |
1439 | SNDRV_PCM_RATE_22050 | \ | |
1440 | SNDRV_PCM_RATE_32000 | \ | |
1441 | SNDRV_PCM_RATE_44100 | \ | |
1442 | SNDRV_PCM_RATE_48000 | \ | |
1443 | SNDRV_PCM_RATE_88200 | \ | |
1444 | SNDRV_PCM_RATE_96000) | |
1445 | ||
1446 | #define WM8903_CAPTURE_RATES (SNDRV_PCM_RATE_8000 |\ | |
1447 | SNDRV_PCM_RATE_11025 | \ | |
1448 | SNDRV_PCM_RATE_16000 | \ | |
1449 | SNDRV_PCM_RATE_22050 | \ | |
1450 | SNDRV_PCM_RATE_32000 | \ | |
1451 | SNDRV_PCM_RATE_44100 | \ | |
1452 | SNDRV_PCM_RATE_48000) | |
1453 | ||
1454 | #define WM8903_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\ | |
1455 | SNDRV_PCM_FMTBIT_S20_3LE |\ | |
1456 | SNDRV_PCM_FMTBIT_S24_LE) | |
1457 | ||
6335d055 EM |
1458 | static struct snd_soc_dai_ops wm8903_dai_ops = { |
1459 | .startup = wm8903_startup, | |
1460 | .shutdown = wm8903_shutdown, | |
1461 | .hw_params = wm8903_hw_params, | |
1462 | .digital_mute = wm8903_digital_mute, | |
1463 | .set_fmt = wm8903_set_dai_fmt, | |
1464 | .set_sysclk = wm8903_set_dai_sysclk, | |
1465 | }; | |
1466 | ||
f1c0a02f MB |
1467 | struct snd_soc_dai wm8903_dai = { |
1468 | .name = "WM8903", | |
1469 | .playback = { | |
1470 | .stream_name = "Playback", | |
1471 | .channels_min = 2, | |
1472 | .channels_max = 2, | |
1473 | .rates = WM8903_PLAYBACK_RATES, | |
1474 | .formats = WM8903_FORMATS, | |
1475 | }, | |
1476 | .capture = { | |
1477 | .stream_name = "Capture", | |
1478 | .channels_min = 2, | |
1479 | .channels_max = 2, | |
1480 | .rates = WM8903_CAPTURE_RATES, | |
1481 | .formats = WM8903_FORMATS, | |
1482 | }, | |
6335d055 | 1483 | .ops = &wm8903_dai_ops, |
0d960e88 | 1484 | .symmetric_rates = 1, |
f1c0a02f MB |
1485 | }; |
1486 | EXPORT_SYMBOL_GPL(wm8903_dai); | |
1487 | ||
1488 | static int wm8903_suspend(struct platform_device *pdev, pm_message_t state) | |
1489 | { | |
1490 | struct snd_soc_device *socdev = platform_get_drvdata(pdev); | |
6627a653 | 1491 | struct snd_soc_codec *codec = socdev->card->codec; |
f1c0a02f MB |
1492 | |
1493 | wm8903_set_bias_level(codec, SND_SOC_BIAS_OFF); | |
1494 | ||
1495 | return 0; | |
1496 | } | |
1497 | ||
1498 | static int wm8903_resume(struct platform_device *pdev) | |
1499 | { | |
1500 | struct snd_soc_device *socdev = platform_get_drvdata(pdev); | |
6627a653 | 1501 | struct snd_soc_codec *codec = socdev->card->codec; |
f1c0a02f MB |
1502 | struct i2c_client *i2c = codec->control_data; |
1503 | int i; | |
1504 | u16 *reg_cache = codec->reg_cache; | |
40aa7030 | 1505 | u16 *tmp_cache = kmemdup(reg_cache, sizeof(wm8903_reg_defaults), |
f1c0a02f MB |
1506 | GFP_KERNEL); |
1507 | ||
1508 | /* Bring the codec back up to standby first to minimise pop/clicks */ | |
1509 | wm8903_set_bias_level(codec, SND_SOC_BIAS_STANDBY); | |
1510 | wm8903_set_bias_level(codec, codec->suspend_bias_level); | |
1511 | ||
1512 | /* Sync back everything else */ | |
1513 | if (tmp_cache) { | |
1514 | for (i = 2; i < ARRAY_SIZE(wm8903_reg_defaults); i++) | |
1515 | if (tmp_cache[i] != reg_cache[i]) | |
8d50e447 | 1516 | snd_soc_write(codec, i, tmp_cache[i]); |
40aa7030 | 1517 | kfree(tmp_cache); |
f1c0a02f MB |
1518 | } else { |
1519 | dev_err(&i2c->dev, "Failed to allocate temporary cache\n"); | |
1520 | } | |
1521 | ||
1522 | return 0; | |
1523 | } | |
1524 | ||
d58d5d55 MB |
1525 | static struct snd_soc_codec *wm8903_codec; |
1526 | ||
c6f29811 MB |
1527 | static __devinit int wm8903_i2c_probe(struct i2c_client *i2c, |
1528 | const struct i2c_device_id *id) | |
f1c0a02f | 1529 | { |
d58d5d55 MB |
1530 | struct wm8903_priv *wm8903; |
1531 | struct snd_soc_codec *codec; | |
73b34ead | 1532 | int ret, i; |
f1c0a02f MB |
1533 | u16 val; |
1534 | ||
d58d5d55 MB |
1535 | wm8903 = kzalloc(sizeof(struct wm8903_priv), GFP_KERNEL); |
1536 | if (wm8903 == NULL) | |
1537 | return -ENOMEM; | |
f1c0a02f | 1538 | |
d58d5d55 MB |
1539 | codec = &wm8903->codec; |
1540 | ||
1541 | mutex_init(&codec->mutex); | |
1542 | INIT_LIST_HEAD(&codec->dapm_widgets); | |
1543 | INIT_LIST_HEAD(&codec->dapm_paths); | |
1544 | ||
1545 | codec->dev = &i2c->dev; | |
f1c0a02f MB |
1546 | codec->name = "WM8903"; |
1547 | codec->owner = THIS_MODULE; | |
f1c0a02f MB |
1548 | codec->bias_level = SND_SOC_BIAS_OFF; |
1549 | codec->set_bias_level = wm8903_set_bias_level; | |
1550 | codec->dai = &wm8903_dai; | |
1551 | codec->num_dai = 1; | |
d58d5d55 MB |
1552 | codec->reg_cache_size = ARRAY_SIZE(wm8903->reg_cache); |
1553 | codec->reg_cache = &wm8903->reg_cache[0]; | |
1554 | codec->private_data = wm8903; | |
8d50e447 | 1555 | codec->volatile_register = wm8903_volatile_register; |
d58d5d55 MB |
1556 | |
1557 | i2c_set_clientdata(i2c, codec); | |
1558 | codec->control_data = i2c; | |
1559 | ||
8d50e447 MB |
1560 | ret = snd_soc_codec_set_cache_io(codec, 8, 16, SND_SOC_I2C); |
1561 | if (ret != 0) { | |
1562 | dev_err(&i2c->dev, "Failed to set cache I/O: %d\n", ret); | |
1563 | goto err; | |
1564 | } | |
1565 | ||
1566 | val = snd_soc_read(codec, WM8903_SW_RESET_AND_ID); | |
d58d5d55 MB |
1567 | if (val != wm8903_reg_defaults[WM8903_SW_RESET_AND_ID]) { |
1568 | dev_err(&i2c->dev, | |
1569 | "Device with ID register %x is not a WM8903\n", val); | |
1570 | return -ENODEV; | |
f1c0a02f MB |
1571 | } |
1572 | ||
8d50e447 | 1573 | val = snd_soc_read(codec, WM8903_REVISION_NUMBER); |
f1c0a02f MB |
1574 | dev_info(&i2c->dev, "WM8903 revision %d\n", |
1575 | val & WM8903_CHIP_REV_MASK); | |
1576 | ||
1577 | wm8903_reset(codec); | |
1578 | ||
37f88e84 | 1579 | /* Set up GPIOs and microphone detection */ |
73b34ead MB |
1580 | if (pdata) { |
1581 | for (i = 0; i < ARRAY_SIZE(pdata->gpio_cfg); i++) { | |
1582 | if (!pdata->gpio_cfg[i]) | |
1583 | continue; | |
1584 | ||
1585 | snd_soc_write(codec, WM8903_GPIO_CONTROL_1 + i, | |
1586 | pdata->gpio_cfg[i] & 0xffff); | |
1587 | } | |
37f88e84 MB |
1588 | |
1589 | snd_soc_write(codec, WM8903_MIC_BIAS_CONTROL_0, | |
1590 | pdata->micdet_cfg); | |
1591 | ||
1592 | /* Microphone detection needs the WSEQ clock */ | |
1593 | if (pdata->micdet_cfg) | |
1594 | snd_soc_update_bits(codec, WM8903_WRITE_SEQUENCER_0, | |
1595 | WM8903_WSEQ_ENA, WM8903_WSEQ_ENA); | |
1596 | ||
1597 | wm8903->mic_delay = pdata->micdet_delay; | |
73b34ead MB |
1598 | } |
1599 | ||
f1c0a02f MB |
1600 | /* power on device */ |
1601 | wm8903_set_bias_level(codec, SND_SOC_BIAS_STANDBY); | |
1602 | ||
1603 | /* Latch volume update bits */ | |
8d50e447 | 1604 | val = snd_soc_read(codec, WM8903_ADC_DIGITAL_VOLUME_LEFT); |
f1c0a02f | 1605 | val |= WM8903_ADCVU; |
8d50e447 MB |
1606 | snd_soc_write(codec, WM8903_ADC_DIGITAL_VOLUME_LEFT, val); |
1607 | snd_soc_write(codec, WM8903_ADC_DIGITAL_VOLUME_RIGHT, val); | |
f1c0a02f | 1608 | |
8d50e447 | 1609 | val = snd_soc_read(codec, WM8903_DAC_DIGITAL_VOLUME_LEFT); |
f1c0a02f | 1610 | val |= WM8903_DACVU; |
8d50e447 MB |
1611 | snd_soc_write(codec, WM8903_DAC_DIGITAL_VOLUME_LEFT, val); |
1612 | snd_soc_write(codec, WM8903_DAC_DIGITAL_VOLUME_RIGHT, val); | |
f1c0a02f | 1613 | |
8d50e447 | 1614 | val = snd_soc_read(codec, WM8903_ANALOGUE_OUT1_LEFT); |
f1c0a02f | 1615 | val |= WM8903_HPOUTVU; |
8d50e447 MB |
1616 | snd_soc_write(codec, WM8903_ANALOGUE_OUT1_LEFT, val); |
1617 | snd_soc_write(codec, WM8903_ANALOGUE_OUT1_RIGHT, val); | |
f1c0a02f | 1618 | |
8d50e447 | 1619 | val = snd_soc_read(codec, WM8903_ANALOGUE_OUT2_LEFT); |
f1c0a02f | 1620 | val |= WM8903_LINEOUTVU; |
8d50e447 MB |
1621 | snd_soc_write(codec, WM8903_ANALOGUE_OUT2_LEFT, val); |
1622 | snd_soc_write(codec, WM8903_ANALOGUE_OUT2_RIGHT, val); | |
f1c0a02f | 1623 | |
8d50e447 | 1624 | val = snd_soc_read(codec, WM8903_ANALOGUE_OUT3_LEFT); |
f1c0a02f | 1625 | val |= WM8903_SPKVU; |
8d50e447 MB |
1626 | snd_soc_write(codec, WM8903_ANALOGUE_OUT3_LEFT, val); |
1627 | snd_soc_write(codec, WM8903_ANALOGUE_OUT3_RIGHT, val); | |
f1c0a02f MB |
1628 | |
1629 | /* Enable DAC soft mute by default */ | |
8d50e447 | 1630 | val = snd_soc_read(codec, WM8903_DAC_DIGITAL_1); |
f1c0a02f | 1631 | val |= WM8903_DAC_MUTEMODE; |
8d50e447 | 1632 | snd_soc_write(codec, WM8903_DAC_DIGITAL_1, val); |
f1c0a02f | 1633 | |
d58d5d55 MB |
1634 | wm8903_dai.dev = &i2c->dev; |
1635 | wm8903_codec = codec; | |
1636 | ||
1637 | ret = snd_soc_register_codec(codec); | |
1638 | if (ret != 0) { | |
1639 | dev_err(&i2c->dev, "Failed to register codec: %d\n", ret); | |
1640 | goto err; | |
1641 | } | |
1642 | ||
1643 | ret = snd_soc_register_dai(&wm8903_dai); | |
1644 | if (ret != 0) { | |
1645 | dev_err(&i2c->dev, "Failed to register DAI: %d\n", ret); | |
1646 | goto err_codec; | |
f1c0a02f MB |
1647 | } |
1648 | ||
1649 | return ret; | |
1650 | ||
d58d5d55 MB |
1651 | err_codec: |
1652 | snd_soc_unregister_codec(codec); | |
1653 | err: | |
1654 | wm8903_codec = NULL; | |
1655 | kfree(wm8903); | |
f1c0a02f MB |
1656 | return ret; |
1657 | } | |
1658 | ||
c6f29811 | 1659 | static __devexit int wm8903_i2c_remove(struct i2c_client *client) |
f1c0a02f | 1660 | { |
d58d5d55 | 1661 | struct snd_soc_codec *codec = i2c_get_clientdata(client); |
f1c0a02f | 1662 | |
d58d5d55 MB |
1663 | snd_soc_unregister_dai(&wm8903_dai); |
1664 | snd_soc_unregister_codec(codec); | |
f1c0a02f | 1665 | |
d58d5d55 | 1666 | wm8903_set_bias_level(codec, SND_SOC_BIAS_OFF); |
f1c0a02f | 1667 | |
d58d5d55 MB |
1668 | kfree(codec->private_data); |
1669 | ||
1670 | wm8903_codec = NULL; | |
1671 | wm8903_dai.dev = NULL; | |
f1c0a02f | 1672 | |
f1c0a02f MB |
1673 | return 0; |
1674 | } | |
1675 | ||
1676 | /* i2c codec control layer */ | |
1677 | static const struct i2c_device_id wm8903_i2c_id[] = { | |
1678 | { "wm8903", 0 }, | |
1679 | { } | |
1680 | }; | |
1681 | MODULE_DEVICE_TABLE(i2c, wm8903_i2c_id); | |
1682 | ||
1683 | static struct i2c_driver wm8903_i2c_driver = { | |
1684 | .driver = { | |
1685 | .name = "WM8903", | |
1686 | .owner = THIS_MODULE, | |
1687 | }, | |
1688 | .probe = wm8903_i2c_probe, | |
c6f29811 | 1689 | .remove = __devexit_p(wm8903_i2c_remove), |
f1c0a02f MB |
1690 | .id_table = wm8903_i2c_id, |
1691 | }; | |
1692 | ||
f1c0a02f MB |
1693 | static int wm8903_probe(struct platform_device *pdev) |
1694 | { | |
1695 | struct snd_soc_device *socdev = platform_get_drvdata(pdev); | |
f1c0a02f MB |
1696 | int ret = 0; |
1697 | ||
d58d5d55 MB |
1698 | if (!wm8903_codec) { |
1699 | dev_err(&pdev->dev, "I2C device not yet probed\n"); | |
1700 | goto err; | |
f1c0a02f MB |
1701 | } |
1702 | ||
6627a653 | 1703 | socdev->card->codec = wm8903_codec; |
f1c0a02f | 1704 | |
d58d5d55 MB |
1705 | /* register pcms */ |
1706 | ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); | |
1707 | if (ret < 0) { | |
1708 | dev_err(&pdev->dev, "failed to create pcms\n"); | |
1709 | goto err; | |
f1c0a02f MB |
1710 | } |
1711 | ||
6627a653 | 1712 | snd_soc_add_controls(socdev->card->codec, wm8903_snd_controls, |
3e8e1952 | 1713 | ARRAY_SIZE(wm8903_snd_controls)); |
6627a653 | 1714 | wm8903_add_widgets(socdev->card->codec); |
f1c0a02f | 1715 | |
f1c0a02f MB |
1716 | return ret; |
1717 | ||
d58d5d55 | 1718 | err: |
f1c0a02f MB |
1719 | return ret; |
1720 | } | |
1721 | ||
1722 | /* power down chip */ | |
1723 | static int wm8903_remove(struct platform_device *pdev) | |
1724 | { | |
1725 | struct snd_soc_device *socdev = platform_get_drvdata(pdev); | |
6627a653 | 1726 | struct snd_soc_codec *codec = socdev->card->codec; |
f1c0a02f MB |
1727 | |
1728 | if (codec->control_data) | |
1729 | wm8903_set_bias_level(codec, SND_SOC_BIAS_OFF); | |
1730 | ||
1731 | snd_soc_free_pcms(socdev); | |
1732 | snd_soc_dapm_free(socdev); | |
f1c0a02f MB |
1733 | |
1734 | return 0; | |
1735 | } | |
1736 | ||
1737 | struct snd_soc_codec_device soc_codec_dev_wm8903 = { | |
1738 | .probe = wm8903_probe, | |
1739 | .remove = wm8903_remove, | |
1740 | .suspend = wm8903_suspend, | |
1741 | .resume = wm8903_resume, | |
1742 | }; | |
1743 | EXPORT_SYMBOL_GPL(soc_codec_dev_wm8903); | |
1744 | ||
c9b3a40f | 1745 | static int __init wm8903_modinit(void) |
64089b84 | 1746 | { |
d58d5d55 | 1747 | return i2c_add_driver(&wm8903_i2c_driver); |
64089b84 MB |
1748 | } |
1749 | module_init(wm8903_modinit); | |
1750 | ||
1751 | static void __exit wm8903_exit(void) | |
1752 | { | |
d58d5d55 | 1753 | i2c_del_driver(&wm8903_i2c_driver); |
64089b84 MB |
1754 | } |
1755 | module_exit(wm8903_exit); | |
1756 | ||
f1c0a02f MB |
1757 | MODULE_DESCRIPTION("ASoC WM8903 driver"); |
1758 | MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.cm>"); | |
1759 | MODULE_LICENSE("GPL"); |