[deliverable/linux.git] / sound / soc / samsung / s3c24xx_simtec.c

/* sound/soc/samsung/s3c24xx_simtec.c
 *
 * Copyright 2009 Simtec Electronics
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
*/

#include <linux/gpio.h>
#include <linux/clk.h>
#include <linux/module.h>

#include <sound/soc.h>

#include <linux/platform_data/asoc-s3c24xx_simtec.h>

#include "s3c24xx-i2s.h"
#include "s3c24xx_simtec.h"

static struct s3c24xx_audio_simtec_pdata *pdata;
static struct clk *xtal_clk;

static int spk_gain;
static int spk_unmute;

/**
 * speaker_gain_get - read the speaker gain setting.
 * @kcontrol: The control for the speaker gain.
 * @ucontrol: The value that needs to be updated.
 *
 * Read the value for the AMP gain control.
 */
static int speaker_gain_get(struct snd_kcontrol *kcontrol,
			    struct snd_ctl_elem_value *ucontrol)
{
	ucontrol->value.integer.value[0] = spk_gain;
	return 0;
}

/**
 * speaker_gain_set - set the value of the speaker amp gain
 * @value: The value to write.
 */
static void speaker_gain_set(int value)
{
	gpio_set_value_cansleep(pdata->amp_gain[0], value & 1);
	gpio_set_value_cansleep(pdata->amp_gain[1], value >> 1);
}

/**
 * speaker_gain_put - set the speaker gain setting.
 * @kcontrol: The control for the speaker gain.
 * @ucontrol: The value that needs to be set.
 *
 * Set the value of the speaker gain from the specified
 * @ucontrol setting.
 *
 * Note, if the speaker amp is muted, then we do not set a gain value
 * as at-least one of the ICs that is fitted will try and power up even
 * if the main control is set to off.
 */
static int speaker_gain_put(struct snd_kcontrol *kcontrol,
			    struct snd_ctl_elem_value *ucontrol)
{
	int value = ucontrol->value.integer.value[0];

	spk_gain = value;

	if (!spk_unmute)
		speaker_gain_set(value);

	return 0;
}

static const struct snd_kcontrol_new amp_gain_controls[] = {
	SOC_SINGLE_EXT("Speaker Gain", 0, 0, 3, 0,
		       speaker_gain_get, speaker_gain_put),
};

/**
 * spk_unmute_state - set the unmute state of the speaker
 * @to: zero to unmute, non-zero to ununmute.
 */
static void spk_unmute_state(int to)
{
	pr_debug("%s: to=%d\n", __func__, to);

	spk_unmute = to;
	gpio_set_value(pdata->amp_gpio, to);

	/* if we're umuting, also re-set the gain */
	if (to && pdata->amp_gain[0] > 0)
		speaker_gain_set(spk_gain);
}

/**
 * speaker_unmute_get - read the speaker unmute setting.
 * @kcontrol: The control for the speaker gain.
 * @ucontrol: The value that needs to be updated.
 *
 * Read the value for the AMP gain control.
 */
static int speaker_unmute_get(struct snd_kcontrol *kcontrol,
			    struct snd_ctl_elem_value *ucontrol)
{
	ucontrol->value.integer.value[0] = spk_unmute;
	return 0;
}

/**
 * speaker_unmute_put - set the speaker unmute setting.
 * @kcontrol: The control for the speaker gain.
 * @ucontrol: The value that needs to be set.
 *
 * Set the value of the speaker gain from the specified
 * @ucontrol setting.
 */
static int speaker_unmute_put(struct snd_kcontrol *kcontrol,
			    struct snd_ctl_elem_value *ucontrol)
{
	spk_unmute_state(ucontrol->value.integer.value[0]);
	return 0;
}

/* This is added as a manual control as the speaker amps create clicks
 * when their power state is changed, which are far more noticeable than
 * anything produced by the CODEC itself.
 */
static const struct snd_kcontrol_new amp_unmute_controls[] = {
	SOC_SINGLE_EXT("Speaker Switch", 0, 0, 1, 0,
		       speaker_unmute_get, speaker_unmute_put),
};

void simtec_audio_init(struct snd_soc_pcm_runtime *rtd)
{
	struct snd_soc_card *card = rtd->card;

	if (pdata->amp_gpio > 0) {
		pr_debug("%s: adding amp routes\n", __func__);

		snd_soc_add_card_controls(card, amp_unmute_controls,
				     ARRAY_SIZE(amp_unmute_controls));
	}

	if (pdata->amp_gain[0] > 0) {
		pr_debug("%s: adding amp controls\n", __func__);
		snd_soc_add_card_controls(card, amp_gain_controls,
				     ARRAY_SIZE(amp_gain_controls));
	}
}
EXPORT_SYMBOL_GPL(simtec_audio_init);

#define CODEC_CLOCK 12000000

/**
 * simtec_hw_params - update hardware parameters
 * @substream: The audio substream instance.
 * @params: The parameters requested.
 *
 * Update the codec data routing and configuration  settings
 * from the supplied data.
 */
static int simtec_hw_params(struct snd_pcm_substream *substream,
			    struct snd_pcm_hw_params *params)
{
	struct snd_soc_pcm_runtime *rtd = substream->private_data;
	struct snd_soc_dai *codec_dai = rtd->codec_dai;
	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
	int ret;

	ret = snd_soc_dai_set_sysclk(codec_dai, 0,
				     CODEC_CLOCK, SND_SOC_CLOCK_IN);
	if (ret) {
		pr_err( "%s: failed setting codec sysclk\n", __func__);
		return ret;
	}

	if (pdata->use_mpllin) {
		ret = snd_soc_dai_set_sysclk(cpu_dai, S3C24XX_CLKSRC_MPLL,
					     0, SND_SOC_CLOCK_OUT);

		if (ret) {
			pr_err("%s: failed to set MPLLin as clksrc\n",
			       __func__);
			return ret;
		}
	}

	if (pdata->output_cdclk) {
		int cdclk_scale;

		cdclk_scale = clk_get_rate(xtal_clk) / CODEC_CLOCK;
		cdclk_scale--;

		ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER,
					     cdclk_scale);
	}

	return 0;
}

static int simtec_call_startup(struct s3c24xx_audio_simtec_pdata *pd)
{
	/* call any board supplied startup code, this currently only
	 * covers the bast/vr1000 which have a CPLD in the way of the
	 * LRCLK */
	if (pd->startup)
		pd->startup();

	return 0;
}

static struct snd_soc_ops simtec_snd_ops = {
	.hw_params	= simtec_hw_params,
};

/**
 * attach_gpio_amp - get and configure the necessary gpios
 * @dev: The device we're probing.
 * @pd: The platform data supplied by the board.
 *
 * If there is a GPIO based amplifier attached to the board, claim
 * the necessary GPIO lines for it, and set default values.
 */
static int attach_gpio_amp(struct device *dev,
			   struct s3c24xx_audio_simtec_pdata *pd)
{
	int ret;

	/* attach gpio amp gain (if any) */
	if (pdata->amp_gain[0] > 0) {
		ret = gpio_request(pd->amp_gain[0], "gpio-amp-gain0");
		if (ret) {
			dev_err(dev, "cannot get amp gpio gain0\n");
			return ret;
		}

		ret = gpio_request(pd->amp_gain[1], "gpio-amp-gain1");
		if (ret) {
			dev_err(dev, "cannot get amp gpio gain1\n");
			gpio_free(pdata->amp_gain[0]);
			return ret;
		}

		gpio_direction_output(pd->amp_gain[0], 0);
		gpio_direction_output(pd->amp_gain[1], 0);
	}

	/* note, currently we assume GPA0 isn't valid amp */
	if (pdata->amp_gpio > 0) {
		ret = gpio_request(pd->amp_gpio, "gpio-amp");
		if (ret) {
			dev_err(dev, "cannot get amp gpio %d (%d)\n",
				pd->amp_gpio, ret);
			goto err_amp;
		}

		/* set the amp off at startup */
		spk_unmute_state(0);
	}

	return 0;

err_amp:
	if (pd->amp_gain[0] > 0) {
		gpio_free(pd->amp_gain[0]);
		gpio_free(pd->amp_gain[1]);
	}

	return ret;
}

static void detach_gpio_amp(struct s3c24xx_audio_simtec_pdata *pd)
{
	if (pd->amp_gain[0] > 0) {
		gpio_free(pd->amp_gain[0]);
		gpio_free(pd->amp_gain[1]);
	}

	if (pd->amp_gpio > 0)
		gpio_free(pd->amp_gpio);
}

#ifdef CONFIG_PM
static int simtec_audio_resume(struct device *dev)
{
	simtec_call_startup(pdata);
	return 0;
}

const struct dev_pm_ops simtec_audio_pmops = {
	.resume	= simtec_audio_resume,
};
EXPORT_SYMBOL_GPL(simtec_audio_pmops);
#endif

int simtec_audio_core_probe(struct platform_device *pdev,
			    struct snd_soc_card *card)
{
	struct platform_device *snd_dev;
	int ret;

	card->dai_link->ops = &simtec_snd_ops;
	card->dai_link->dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
				  SND_SOC_DAIFMT_CBM_CFM;

	pdata = pdev->dev.platform_data;
	if (!pdata) {
		dev_err(&pdev->dev, "no platform data supplied\n");
		return -EINVAL;
	}

	simtec_call_startup(pdata);

	xtal_clk = clk_get(&pdev->dev, "xtal");
	if (IS_ERR(xtal_clk)) {
		dev_err(&pdev->dev, "could not get clkout0\n");
		return -EINVAL;
	}

	dev_info(&pdev->dev, "xtal rate is %ld\n", clk_get_rate(xtal_clk));

	ret = attach_gpio_amp(&pdev->dev, pdata);
	if (ret)
		goto err_clk;

	snd_dev = platform_device_alloc("soc-audio", -1);
	if (!snd_dev) {
		dev_err(&pdev->dev, "failed to alloc soc-audio devicec\n");
		ret = -ENOMEM;
		goto err_gpio;
	}

	platform_set_drvdata(snd_dev, card);

	ret = platform_device_add(snd_dev);
	if (ret) {
		dev_err(&pdev->dev, "failed to add soc-audio dev\n");
		goto err_pdev;
	}

	platform_set_drvdata(pdev, snd_dev);
	return 0;

err_pdev:
	platform_device_put(snd_dev);

err_gpio:
	detach_gpio_amp(pdata);

err_clk:
	clk_put(xtal_clk);
	return ret;
}
EXPORT_SYMBOL_GPL(simtec_audio_core_probe);

int simtec_audio_remove(struct platform_device *pdev)
{
	struct platform_device *snd_dev = platform_get_drvdata(pdev);

	platform_device_unregister(snd_dev);

	detach_gpio_amp(pdata);
	clk_put(xtal_clk);
	return 0;
}
EXPORT_SYMBOL_GPL(simtec_audio_remove);

MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
MODULE_DESCRIPTION("ALSA SoC Simtec Audio common support");
MODULE_LICENSE("GPL");
Commit	Line	Data
5033f43c	1	/* sound/soc/samsung/s3c24xx_simtec.c
14412acd BD	2	*
	3	* Copyright 2009 Simtec Electronics
	4	*
	5	* This program is free software; you can redistribute it and/or modify
	6	* it under the terms of the GNU General Public License version 2 as
	7	* published by the Free Software Foundation.
	8	*/
	9
14412acd BD	10	#include <linux/gpio.h>
14412acd BD	11	#include <linux/clk.h>
da155d5b	12	#include <linux/module.h>
14412acd	13
14412acd	14	#include <sound/soc.h>
14412acd	15
436d42c6	16	#include <linux/platform_data/asoc-s3c24xx_simtec.h>
14412acd	17
14412acd BD	18	#include "s3c24xx-i2s.h"
	19	#include "s3c24xx_simtec.h"
	20
	21	static struct s3c24xx_audio_simtec_pdata *pdata;
	22	static struct clk *xtal_clk;
	23
	24	static int spk_gain;
	25	static int spk_unmute;
	26
	27	/**
	28	* speaker_gain_get - read the speaker gain setting.
	29	* @kcontrol: The control for the speaker gain.
	30	* @ucontrol: The value that needs to be updated.
	31	*
	32	* Read the value for the AMP gain control.
	33	*/
	34	static int speaker_gain_get(struct snd_kcontrol *kcontrol,
	35	struct snd_ctl_elem_value *ucontrol)
	36	{
	37	ucontrol->value.integer.value[0] = spk_gain;
	38	return 0;
	39	}
	40
	41	/**
	42	* speaker_gain_set - set the value of the speaker amp gain
	43	* @value: The value to write.
	44	*/
	45	static void speaker_gain_set(int value)
	46	{
	47	gpio_set_value_cansleep(pdata->amp_gain[0], value & 1);
	48	gpio_set_value_cansleep(pdata->amp_gain[1], value >> 1);
	49	}
	50
	51	/**
	52	* speaker_gain_put - set the speaker gain setting.
	53	* @kcontrol: The control for the speaker gain.
	54	* @ucontrol: The value that needs to be set.
	55	*
	56	* Set the value of the speaker gain from the specified
	57	* @ucontrol setting.
	58	*
	59	* Note, if the speaker amp is muted, then we do not set a gain value
	60	* as at-least one of the ICs that is fitted will try and power up even
	61	* if the main control is set to off.
	62	*/
	63	static int speaker_gain_put(struct snd_kcontrol *kcontrol,
	64	struct snd_ctl_elem_value *ucontrol)
	65	{
	66	int value = ucontrol->value.integer.value[0];
	67
	68	spk_gain = value;
	69
	70	if (!spk_unmute)
	71	speaker_gain_set(value);
	72
	73	return 0;
	74	}
	75
	76	static const struct snd_kcontrol_new amp_gain_controls[] = {
	77	SOC_SINGLE_EXT("Speaker Gain", 0, 0, 3, 0,
	78	speaker_gain_get, speaker_gain_put),
	79	};
	80
	81	/**
82	* spk_unmute_state - set the unmute state of the speaker
83	* @to: zero to unmute, non-zero to ununmute.
84	*/
85	static void spk_unmute_state(int to)
86	{
87	pr_debug("%s: to=%d\n", __func__, to);
88
89	spk_unmute = to;
90	gpio_set_value(pdata->amp_gpio, to);
91
92	/* if we're umuting, also re-set the gain */
93	if (to && pdata->amp_gain[0] > 0)
94	speaker_gain_set(spk_gain);
95	}
96
97	/**
98	* speaker_unmute_get - read the speaker unmute setting.
99	* @kcontrol: The control for the speaker gain.
100	* @ucontrol: The value that needs to be updated.
101	*
102	* Read the value for the AMP gain control.
103	*/
104	static int speaker_unmute_get(struct snd_kcontrol *kcontrol,
105	struct snd_ctl_elem_value *ucontrol)
106	{
107	ucontrol->value.integer.value[0] = spk_unmute;
108	return 0;
109	}
110
111	/**
112	* speaker_unmute_put - set the speaker unmute setting.
113	* @kcontrol: The control for the speaker gain.
114	* @ucontrol: The value that needs to be set.
115	*
116	* Set the value of the speaker gain from the specified
117	* @ucontrol setting.
118	*/
119	static int speaker_unmute_put(struct snd_kcontrol *kcontrol,
120	struct snd_ctl_elem_value *ucontrol)
121	{
122	spk_unmute_state(ucontrol->value.integer.value[0]);
123	return 0;
124	}
125
126	/* This is added as a manual control as the speaker amps create clicks
127	* when their power state is changed, which are far more noticeable than
128	* anything produced by the CODEC itself.
129	*/
130	static const struct snd_kcontrol_new amp_unmute_controls[] = {
131	SOC_SINGLE_EXT("Speaker Switch", 0, 0, 1, 0,
132	speaker_unmute_get, speaker_unmute_put),
133	};
134
f0fba2ad	135	void simtec_audio_init(struct snd_soc_pcm_runtime *rtd)
14412acd	136	{
022658be	137	struct snd_soc_card *card = rtd->card;
f0fba2ad	138
14412acd BD	139	if (pdata->amp_gpio > 0) {
	140	pr_debug("%s: adding amp routes\n", __func__);
	141
022658be	142	snd_soc_add_card_controls(card, amp_unmute_controls,
14412acd BD	143	ARRAY_SIZE(amp_unmute_controls));
	144	}
	145
	146	if (pdata->amp_gain[0] > 0) {
	147	pr_debug("%s: adding amp controls\n", __func__);
022658be	148	snd_soc_add_card_controls(card, amp_gain_controls,
14412acd BD	149	ARRAY_SIZE(amp_gain_controls));
	150	}
	151	}
	152	EXPORT_SYMBOL_GPL(simtec_audio_init);
	153
	154	#define CODEC_CLOCK 12000000
	155
	156	/**
	157	* simtec_hw_params - update hardware parameters
	158	* @substream: The audio substream instance.
	159	* @params: The parameters requested.
	160	*
	161	* Update the codec data routing and configuration settings
	162	* from the supplied data.
	163	*/
	164	static int simtec_hw_params(struct snd_pcm_substream *substream,
	165	struct snd_pcm_hw_params *params)
	166	{
	167	struct snd_soc_pcm_runtime *rtd = substream->private_data;
f0fba2ad LG	168	struct snd_soc_dai *codec_dai = rtd->codec_dai;
f0fba2ad LG	169	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
14412acd BD	170	int ret;
14412acd BD	171
14412acd BD	172	ret = snd_soc_dai_set_sysclk(codec_dai, 0,
	173	CODEC_CLOCK, SND_SOC_CLOCK_IN);
	174	if (ret) {
	175	pr_err( "%s: failed setting codec sysclk\n", __func__);
	176	return ret;
	177	}
	178
	179	if (pdata->use_mpllin) {
	180	ret = snd_soc_dai_set_sysclk(cpu_dai, S3C24XX_CLKSRC_MPLL,
	181	0, SND_SOC_CLOCK_OUT);
	182
	183	if (ret) {
	184	pr_err("%s: failed to set MPLLin as clksrc\n",
	185	__func__);
	186	return ret;
	187	}
	188	}
	189
	190	if (pdata->output_cdclk) {
	191	int cdclk_scale;
	192
	193	cdclk_scale = clk_get_rate(xtal_clk) / CODEC_CLOCK;
	194	cdclk_scale--;
	195
	196	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER,
	197	cdclk_scale);
	198	}
	199
	200	return 0;
	201	}
	202
	203	static int simtec_call_startup(struct s3c24xx_audio_simtec_pdata *pd)
	204	{
	205	/* call any board supplied startup code, this currently only
	206	* covers the bast/vr1000 which have a CPLD in the way of the
	207	* LRCLK */
	208	if (pd->startup)
	209	pd->startup();
	210
	211	return 0;
	212	}
	213
	214	static struct snd_soc_ops simtec_snd_ops = {
	215	.hw_params = simtec_hw_params,
	216	};
	217
	218	/**
	219	* attach_gpio_amp - get and configure the necessary gpios
	220	* @dev: The device we're probing.
	221	* @pd: The platform data supplied by the board.
	222	*
	223	* If there is a GPIO based amplifier attached to the board, claim
	224	* the necessary GPIO lines for it, and set default values.
	225	*/
	226	static int attach_gpio_amp(struct device *dev,
	227	struct s3c24xx_audio_simtec_pdata *pd)
	228	{
	229	int ret;
	230
	231	/* attach gpio amp gain (if any) */
	232	if (pdata->amp_gain[0] > 0) {
	233	ret = gpio_request(pd->amp_gain[0], "gpio-amp-gain0");
	234	if (ret) {
	235	dev_err(dev, "cannot get amp gpio gain0\n");
236	return ret;
237	}
238
239	ret = gpio_request(pd->amp_gain[1], "gpio-amp-gain1");
240	if (ret) {
241	dev_err(dev, "cannot get amp gpio gain1\n");
242	gpio_free(pdata->amp_gain[0]);
243	return ret;
244	}
245
246	gpio_direction_output(pd->amp_gain[0], 0);
247	gpio_direction_output(pd->amp_gain[1], 0);
248	}
249
af901ca1	250	/* note, currently we assume GPA0 isn't valid amp */
14412acd BD	251	if (pdata->amp_gpio > 0) {
	252	ret = gpio_request(pd->amp_gpio, "gpio-amp");
	253	if (ret) {
	254	dev_err(dev, "cannot get amp gpio %d (%d)\n",
	255	pd->amp_gpio, ret);
	256	goto err_amp;
	257	}
	258
	259	/* set the amp off at startup */
	260	spk_unmute_state(0);
	261	}
	262
	263	return 0;
	264
	265	err_amp:
	266	if (pd->amp_gain[0] > 0) {
	267	gpio_free(pd->amp_gain[0]);
	268	gpio_free(pd->amp_gain[1]);
	269	}
	270
	271	return ret;
	272	}
	273
	274	static void detach_gpio_amp(struct s3c24xx_audio_simtec_pdata *pd)
	275	{
	276	if (pd->amp_gain[0] > 0) {
	277	gpio_free(pd->amp_gain[0]);
	278	gpio_free(pd->amp_gain[1]);
	279	}
	280
	281	if (pd->amp_gpio > 0)
	282	gpio_free(pd->amp_gpio);
	283	}
	284
	285	#ifdef CONFIG_PM
2e4891a5	286	static int simtec_audio_resume(struct device *dev)
14412acd BD	287	{
	288	simtec_call_startup(pdata);
	289	return 0;
	290	}
	291
47145210	292	const struct dev_pm_ops simtec_audio_pmops = {
14412acd BD	293	.resume = simtec_audio_resume,
	294	};
	295	EXPORT_SYMBOL_GPL(simtec_audio_pmops);
	296	#endif
	297
fdca21ad BP	298	int simtec_audio_core_probe(struct platform_device *pdev,
fdca21ad BP	299	struct snd_soc_card *card)
14412acd BD	300	{
	301	struct platform_device *snd_dev;
	302	int ret;
	303
f0fba2ad	304	card->dai_link->ops = &simtec_snd_ops;
d27e51da LPC	305	card->dai_link->dai_fmt = SND_SOC_DAIFMT_I2S \| SND_SOC_DAIFMT_NB_NF \|
d27e51da LPC	306	SND_SOC_DAIFMT_CBM_CFM;
14412acd BD	307
	308	pdata = pdev->dev.platform_data;
	309	if (!pdata) {
	310	dev_err(&pdev->dev, "no platform data supplied\n");
	311	return -EINVAL;
	312	}
	313
	314	simtec_call_startup(pdata);
	315
	316	xtal_clk = clk_get(&pdev->dev, "xtal");
	317	if (IS_ERR(xtal_clk)) {
	318	dev_err(&pdev->dev, "could not get clkout0\n");
	319	return -EINVAL;
	320	}
	321
	322	dev_info(&pdev->dev, "xtal rate is %ld\n", clk_get_rate(xtal_clk));
	323
	324	ret = attach_gpio_amp(&pdev->dev, pdata);
	325	if (ret)
	326	goto err_clk;
	327
	328	snd_dev = platform_device_alloc("soc-audio", -1);
	329	if (!snd_dev) {
	330	dev_err(&pdev->dev, "failed to alloc soc-audio devicec\n");
	331	ret = -ENOMEM;
	332	goto err_gpio;
	333	}
	334
f0fba2ad	335	platform_set_drvdata(snd_dev, card);
14412acd BD	336
	337	ret = platform_device_add(snd_dev);
	338	if (ret) {
	339	dev_err(&pdev->dev, "failed to add soc-audio dev\n");
	340	goto err_pdev;
	341	}
	342
	343	platform_set_drvdata(pdev, snd_dev);
	344	return 0;
	345
	346	err_pdev:
	347	platform_device_put(snd_dev);
	348
	349	err_gpio:
	350	detach_gpio_amp(pdata);
	351
	352	err_clk:
	353	clk_put(xtal_clk);
	354	return ret;
	355	}
	356	EXPORT_SYMBOL_GPL(simtec_audio_core_probe);
	357
fdca21ad	358	int simtec_audio_remove(struct platform_device *pdev)
14412acd BD	359	{
	360	struct platform_device *snd_dev = platform_get_drvdata(pdev);
	361
	362	platform_device_unregister(snd_dev);
	363
	364	detach_gpio_amp(pdata);
	365	clk_put(xtal_clk);
	366	return 0;
	367	}
	368	EXPORT_SYMBOL_GPL(simtec_audio_remove);
	369
	370	MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
	371	MODULE_DESCRIPTION("ALSA SoC Simtec Audio common support");
	372	MODULE_LICENSE("GPL");