projects / deliverable / linux.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
ASoC: samsung: Add devm_clk_get to pcm.c
[deliverable/linux.git] / sound / soc / ux500 / ux500_msp_i2s.c
CommitLineData
3592b7f6
OL		 1/*
2 * Copyright (C) ST-Ericsson SA 2012
3 *
4 * Author: Ola Lilja <ola.o.lilja@stericsson.com>,
5 * Roger Nilsson <roger.xr.nilsson@stericsson.com>,
6 * Sandeep Kaushik <sandeep.kaushik@st.com>
7 * for ST-Ericsson.
8 *
9 * License terms:
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License version 2 as published
13 * by the Free Software Foundation.
14 */
15
16#include <linux/module.h>
17#include <linux/platform_device.h>
18#include <linux/delay.h>
19#include <linux/slab.h>
05304949 20#include <linux/io.h>
49731c23 21#include <linux/of.h>
ab0fc6ce 22#include <linux/platform_data/asoc-ux500-msp.h>
3592b7f6 23
3592b7f6
OL		 24#include <sound/soc.h>
25
26#include "ux500_msp_i2s.h"
27
28 /* Protocol desciptors */
29static const struct msp_protdesc prot_descs[] = {
30 { /* I2S */
31 MSP_SINGLE_PHASE,
32 MSP_SINGLE_PHASE,
33 MSP_PHASE2_START_MODE_IMEDIATE,
34 MSP_PHASE2_START_MODE_IMEDIATE,
35 MSP_BTF_MS_BIT_FIRST,
36 MSP_BTF_MS_BIT_FIRST,
37 MSP_FRAME_LEN_1,
38 MSP_FRAME_LEN_1,
39 MSP_FRAME_LEN_1,
40 MSP_FRAME_LEN_1,
41 MSP_ELEM_LEN_32,
42 MSP_ELEM_LEN_32,
43 MSP_ELEM_LEN_32,
44 MSP_ELEM_LEN_32,
45 MSP_DELAY_1,
46 MSP_DELAY_1,
47 MSP_RISING_EDGE,
48 MSP_FALLING_EDGE,
49 MSP_FSYNC_POL_ACT_LO,
50 MSP_FSYNC_POL_ACT_LO,
51 MSP_SWAP_NONE,
52 MSP_SWAP_NONE,
53 MSP_COMPRESS_MODE_LINEAR,
54 MSP_EXPAND_MODE_LINEAR,
55 MSP_FSYNC_IGNORE,
56 31,
57 15,
58 32,
59 }, { /* PCM */
60 MSP_DUAL_PHASE,
61 MSP_DUAL_PHASE,
62 MSP_PHASE2_START_MODE_FSYNC,
63 MSP_PHASE2_START_MODE_FSYNC,
64 MSP_BTF_MS_BIT_FIRST,
65 MSP_BTF_MS_BIT_FIRST,
66 MSP_FRAME_LEN_1,
67 MSP_FRAME_LEN_1,
68 MSP_FRAME_LEN_1,
69 MSP_FRAME_LEN_1,
70 MSP_ELEM_LEN_16,
71 MSP_ELEM_LEN_16,
72 MSP_ELEM_LEN_16,
73 MSP_ELEM_LEN_16,
74 MSP_DELAY_0,
75 MSP_DELAY_0,
76 MSP_RISING_EDGE,
77 MSP_FALLING_EDGE,
78 MSP_FSYNC_POL_ACT_HI,
79 MSP_FSYNC_POL_ACT_HI,
80 MSP_SWAP_NONE,
81 MSP_SWAP_NONE,
82 MSP_COMPRESS_MODE_LINEAR,
83 MSP_EXPAND_MODE_LINEAR,
84 MSP_FSYNC_IGNORE,
85 255,
86 0,
87 256,
88 }, { /* Companded PCM */
89 MSP_SINGLE_PHASE,
90 MSP_SINGLE_PHASE,
91 MSP_PHASE2_START_MODE_FSYNC,
92 MSP_PHASE2_START_MODE_FSYNC,
93 MSP_BTF_MS_BIT_FIRST,
94 MSP_BTF_MS_BIT_FIRST,
95 MSP_FRAME_LEN_1,
96 MSP_FRAME_LEN_1,
97 MSP_FRAME_LEN_1,
98 MSP_FRAME_LEN_1,
99 MSP_ELEM_LEN_8,
100 MSP_ELEM_LEN_8,
101 MSP_ELEM_LEN_8,
102 MSP_ELEM_LEN_8,
103 MSP_DELAY_0,
104 MSP_DELAY_0,
105 MSP_RISING_EDGE,
106 MSP_RISING_EDGE,
107 MSP_FSYNC_POL_ACT_HI,
108 MSP_FSYNC_POL_ACT_HI,
109 MSP_SWAP_NONE,
110 MSP_SWAP_NONE,
111 MSP_COMPRESS_MODE_LINEAR,
112 MSP_EXPAND_MODE_LINEAR,
113 MSP_FSYNC_IGNORE,
114 255,
115 0,
116 256,
117 },
118};
119
120static void set_prot_desc_tx(struct ux500_msp *msp,
121 struct msp_protdesc *protdesc,
122 enum msp_data_size data_size)
123{
124 u32 temp_reg = 0;
125
126 temp_reg |= MSP_P2_ENABLE_BIT(protdesc->tx_phase_mode);
127 temp_reg |= MSP_P2_START_MODE_BIT(protdesc->tx_phase2_start_mode);
128 temp_reg |= MSP_P1_FRAME_LEN_BITS(protdesc->tx_frame_len_1);
129 temp_reg |= MSP_P2_FRAME_LEN_BITS(protdesc->tx_frame_len_2);
130 if (msp->def_elem_len) {
131 temp_reg |= MSP_P1_ELEM_LEN_BITS(protdesc->tx_elem_len_1);
132 temp_reg |= MSP_P2_ELEM_LEN_BITS(protdesc->tx_elem_len_2);
133 } else {
134 temp_reg |= MSP_P1_ELEM_LEN_BITS(data_size);
135 temp_reg |= MSP_P2_ELEM_LEN_BITS(data_size);
136 }
137 temp_reg |= MSP_DATA_DELAY_BITS(protdesc->tx_data_delay);
138 temp_reg |= MSP_SET_ENDIANNES_BIT(protdesc->tx_byte_order);
139 temp_reg |= MSP_FSYNC_POL(protdesc->tx_fsync_pol);
140 temp_reg |= MSP_DATA_WORD_SWAP(protdesc->tx_half_word_swap);
141 temp_reg |= MSP_SET_COMPANDING_MODE(protdesc->compression_mode);
142 temp_reg |= MSP_SET_FSYNC_IGNORE(protdesc->frame_sync_ignore);
143
144 writel(temp_reg, msp->registers + MSP_TCF);
145}
146
147static void set_prot_desc_rx(struct ux500_msp *msp,
148 struct msp_protdesc *protdesc,
149 enum msp_data_size data_size)
150{
151 u32 temp_reg = 0;
152
153 temp_reg |= MSP_P2_ENABLE_BIT(protdesc->rx_phase_mode);
154 temp_reg |= MSP_P2_START_MODE_BIT(protdesc->rx_phase2_start_mode);
155 temp_reg |= MSP_P1_FRAME_LEN_BITS(protdesc->rx_frame_len_1);
156 temp_reg |= MSP_P2_FRAME_LEN_BITS(protdesc->rx_frame_len_2);
157 if (msp->def_elem_len) {
158 temp_reg |= MSP_P1_ELEM_LEN_BITS(protdesc->rx_elem_len_1);
159 temp_reg |= MSP_P2_ELEM_LEN_BITS(protdesc->rx_elem_len_2);
160 } else {
161 temp_reg |= MSP_P1_ELEM_LEN_BITS(data_size);
162 temp_reg |= MSP_P2_ELEM_LEN_BITS(data_size);
163 }
164
165 temp_reg |= MSP_DATA_DELAY_BITS(protdesc->rx_data_delay);
166 temp_reg |= MSP_SET_ENDIANNES_BIT(protdesc->rx_byte_order);
167 temp_reg |= MSP_FSYNC_POL(protdesc->rx_fsync_pol);
168 temp_reg |= MSP_DATA_WORD_SWAP(protdesc->rx_half_word_swap);
169 temp_reg |= MSP_SET_COMPANDING_MODE(protdesc->expansion_mode);
170 temp_reg |= MSP_SET_FSYNC_IGNORE(protdesc->frame_sync_ignore);
171
172 writel(temp_reg, msp->registers + MSP_RCF);
173}
174
175static int configure_protocol(struct ux500_msp *msp,
176 struct ux500_msp_config *config)
177{
178 struct msp_protdesc *protdesc;
179 enum msp_data_size data_size;
180 u32 temp_reg = 0;
181
182 data_size = config->data_size;
183 msp->def_elem_len = config->def_elem_len;
184 if (config->default_protdesc == 1) {
185 if (config->protocol >= MSP_INVALID_PROTOCOL) {
186 dev_err(msp->dev, "%s: ERROR: Invalid protocol!\n",
187 __func__);
188 return -EINVAL;
189 }
190 protdesc =
191 (struct msp_protdesc *)&prot_descs[config->protocol];
192 } else {
193 protdesc = (struct msp_protdesc *)&config->protdesc;
194 }
195
196 if (data_size < MSP_DATA_BITS_DEFAULT || data_size > MSP_DATA_BITS_32) {
197 dev_err(msp->dev,
198 "%s: ERROR: Invalid data-size requested (data_size = %d)!\n",
199 __func__, data_size);
200 return -EINVAL;
201 }
202
203 if (config->direction & MSP_DIR_TX)
204 set_prot_desc_tx(msp, protdesc, data_size);
205 if (config->direction & MSP_DIR_RX)
206 set_prot_desc_rx(msp, protdesc, data_size);
207
208 /* The code below should not be separated. */
209 temp_reg = readl(msp->registers + MSP_GCR) & ~TX_CLK_POL_RISING;
210 temp_reg |= MSP_TX_CLKPOL_BIT(~protdesc->tx_clk_pol);
211 writel(temp_reg, msp->registers + MSP_GCR);
212 temp_reg = readl(msp->registers + MSP_GCR) & ~RX_CLK_POL_RISING;
213 temp_reg |= MSP_RX_CLKPOL_BIT(protdesc->rx_clk_pol);
214 writel(temp_reg, msp->registers + MSP_GCR);
215
216 return 0;
217}
218
219static int setup_bitclk(struct ux500_msp *msp, struct ux500_msp_config *config)
220{
221 u32 reg_val_GCR;
222 u32 frame_per = 0;
223 u32 sck_div = 0;
224 u32 frame_width = 0;
225 u32 temp_reg = 0;
226 struct msp_protdesc *protdesc = NULL;
227
228 reg_val_GCR = readl(msp->registers + MSP_GCR);
229 writel(reg_val_GCR & ~SRG_ENABLE, msp->registers + MSP_GCR);
230
231 if (config->default_protdesc)
232 protdesc =
233 (struct msp_protdesc *)&prot_descs[config->protocol];
234 else
235 protdesc = (struct msp_protdesc *)&config->protdesc;
236
237 switch (config->protocol) {
238 case MSP_PCM_PROTOCOL:
239 case MSP_PCM_COMPAND_PROTOCOL:
240 frame_width = protdesc->frame_width;
241 sck_div = config->f_inputclk / (config->frame_freq *
242 (protdesc->clocks_per_frame));
243 frame_per = protdesc->frame_period;
244 break;
245 case MSP_I2S_PROTOCOL:
246 frame_width = protdesc->frame_width;
247 sck_div = config->f_inputclk / (config->frame_freq *
248 (protdesc->clocks_per_frame));
249 frame_per = protdesc->frame_period;
250 break;
251 default:
252 dev_err(msp->dev, "%s: ERROR: Unknown protocol (%d)!\n",
253 __func__,
254 config->protocol);
255 return -EINVAL;
256 }
257
258 temp_reg = (sck_div - 1) & SCK_DIV_MASK;
259 temp_reg |= FRAME_WIDTH_BITS(frame_width);
260 temp_reg |= FRAME_PERIOD_BITS(frame_per);
261 writel(temp_reg, msp->registers + MSP_SRG);
262
263 msp->f_bitclk = (config->f_inputclk)/(sck_div + 1);
264
265 /* Enable bit-clock */
266 udelay(100);
267 reg_val_GCR = readl(msp->registers + MSP_GCR);
268 writel(reg_val_GCR | SRG_ENABLE, msp->registers + MSP_GCR);
269 udelay(100);
270
271 return 0;
272}
273
274static int configure_multichannel(struct ux500_msp *msp,
275 struct ux500_msp_config *config)
276{
277 struct msp_protdesc *protdesc;
278 struct msp_multichannel_config *mcfg;
279 u32 reg_val_MCR;
280
281 if (config->default_protdesc == 1) {
282 if (config->protocol >= MSP_INVALID_PROTOCOL) {
283 dev_err(msp->dev,
284 "%s: ERROR: Invalid protocol (%d)!\n",
285 __func__, config->protocol);
286 return -EINVAL;
287 }
288 protdesc = (struct msp_protdesc *)
289 &prot_descs[config->protocol];
290 } else {
291 protdesc = (struct msp_protdesc *)&config->protdesc;
292 }
293
294 mcfg = &config->multichannel_config;
295 if (mcfg->tx_multichannel_enable) {
296 if (protdesc->tx_phase_mode == MSP_SINGLE_PHASE) {
297 reg_val_MCR = readl(msp->registers + MSP_MCR);
298 writel(reg_val_MCR | (mcfg->tx_multichannel_enable ?
299 1 << TMCEN_BIT : 0),
300 msp->registers + MSP_MCR);
301 writel(mcfg->tx_channel_0_enable,
302 msp->registers + MSP_TCE0);
303 writel(mcfg->tx_channel_1_enable,
304 msp->registers + MSP_TCE1);
305 writel(mcfg->tx_channel_2_enable,
306 msp->registers + MSP_TCE2);
307 writel(mcfg->tx_channel_3_enable,
308 msp->registers + MSP_TCE3);
309 } else {
310 dev_err(msp->dev,
311 "%s: ERROR: Only single-phase supported (TX-mode: %d)!\n",
312 __func__, protdesc->tx_phase_mode);
313 return -EINVAL;
314 }
315 }
316 if (mcfg->rx_multichannel_enable) {
317 if (protdesc->rx_phase_mode == MSP_SINGLE_PHASE) {
318 reg_val_MCR = readl(msp->registers + MSP_MCR);
319 writel(reg_val_MCR | (mcfg->rx_multichannel_enable ?
320 1 << RMCEN_BIT : 0),
321 msp->registers + MSP_MCR);
322 writel(mcfg->rx_channel_0_enable,
323 msp->registers + MSP_RCE0);
324 writel(mcfg->rx_channel_1_enable,
325 msp->registers + MSP_RCE1);
326 writel(mcfg->rx_channel_2_enable,
327 msp->registers + MSP_RCE2);
328 writel(mcfg->rx_channel_3_enable,
329 msp->registers + MSP_RCE3);
330 } else {
331 dev_err(msp->dev,
332 "%s: ERROR: Only single-phase supported (RX-mode: %d)!\n",
333 __func__, protdesc->rx_phase_mode);
334 return -EINVAL;
335 }
336 if (mcfg->rx_comparison_enable_mode) {
337 reg_val_MCR = readl(msp->registers + MSP_MCR);
338 writel(reg_val_MCR |
339 (mcfg->rx_comparison_enable_mode << RCMPM_BIT),
340 msp->registers + MSP_MCR);
341
342 writel(mcfg->comparison_mask,
343 msp->registers + MSP_RCM);
344 writel(mcfg->comparison_value,
345 msp->registers + MSP_RCV);
346
347 }
348 }
349
350 return 0;
351}
352
353static int enable_msp(struct ux500_msp *msp, struct ux500_msp_config *config)
354{
6ee0b4b0 355 int status = 0;
3592b7f6 356 u32 reg_val_DMACR, reg_val_GCR;
3592b7f6
OL		 357
358 /* Configure msp with protocol dependent settings */
359 configure_protocol(msp, config);
360 setup_bitclk(msp, config);
361 if (config->multichannel_configured == 1) {
362 status = configure_multichannel(msp, config);
363 if (status)
364 dev_warn(msp->dev,
365 "%s: WARN: configure_multichannel failed (%d)!\n",
366 __func__, status);
367 }
368
369 /* Make sure the correct DMA-directions are configured */
f3fe53dd
FB		 370 if ((config->direction & MSP_DIR_RX) &&
371 !msp->capture_dma_data.dma_cfg) {
3592b7f6
OL		 372 dev_err(msp->dev, "%s: ERROR: MSP RX-mode is not configured!",
373 __func__);
374 return -EINVAL;
375 }
f3fe53dd
FB		 376 if ((config->direction == MSP_DIR_TX) &&
377 !msp->playback_dma_data.dma_cfg) {
3592b7f6
OL		 378 dev_err(msp->dev, "%s: ERROR: MSP TX-mode is not configured!",
379 __func__);
380 return -EINVAL;
381 }
382
383 reg_val_DMACR = readl(msp->registers + MSP_DMACR);
384 if (config->direction & MSP_DIR_RX)
385 reg_val_DMACR |= RX_DMA_ENABLE;
386 if (config->direction & MSP_DIR_TX)
387 reg_val_DMACR |= TX_DMA_ENABLE;
388 writel(reg_val_DMACR, msp->registers + MSP_DMACR);
389
390 writel(config->iodelay, msp->registers + MSP_IODLY);
391
392 /* Enable frame generation logic */
393 reg_val_GCR = readl(msp->registers + MSP_GCR);
394 writel(reg_val_GCR | FRAME_GEN_ENABLE, msp->registers + MSP_GCR);
395
396 return status;
397}
398
399static void flush_fifo_rx(struct ux500_msp *msp)
400{
401 u32 reg_val_DR, reg_val_GCR, reg_val_FLR;
402 u32 limit = 32;
403
404 reg_val_GCR = readl(msp->registers + MSP_GCR);
405 writel(reg_val_GCR | RX_ENABLE, msp->registers + MSP_GCR);
406
407 reg_val_FLR = readl(msp->registers + MSP_FLR);
408 while (!(reg_val_FLR & RX_FIFO_EMPTY) && limit--) {
409 reg_val_DR = readl(msp->registers + MSP_DR);
410 reg_val_FLR = readl(msp->registers + MSP_FLR);
411 }
412
413 writel(reg_val_GCR, msp->registers + MSP_GCR);
414}
415
416static void flush_fifo_tx(struct ux500_msp *msp)
417{
418 u32 reg_val_TSTDR, reg_val_GCR, reg_val_FLR;
419 u32 limit = 32;
420
421 reg_val_GCR = readl(msp->registers + MSP_GCR);
422 writel(reg_val_GCR | TX_ENABLE, msp->registers + MSP_GCR);
423 writel(MSP_ITCR_ITEN | MSP_ITCR_TESTFIFO, msp->registers + MSP_ITCR);
424
425 reg_val_FLR = readl(msp->registers + MSP_FLR);
426 while (!(reg_val_FLR & TX_FIFO_EMPTY) && limit--) {
427 reg_val_TSTDR = readl(msp->registers + MSP_TSTDR);
428 reg_val_FLR = readl(msp->registers + MSP_FLR);
429 }
430 writel(0x0, msp->registers + MSP_ITCR);
431 writel(reg_val_GCR, msp->registers + MSP_GCR);
432}
433
434int ux500_msp_i2s_open(struct ux500_msp *msp,
435 struct ux500_msp_config *config)
436{
437 u32 old_reg, new_reg, mask;
438 int res;
439 unsigned int tx_sel, rx_sel, tx_busy, rx_busy;
440
441 if (in_interrupt()) {
442 dev_err(msp->dev,
443 "%s: ERROR: Open called in interrupt context!\n",
444 __func__);
445 return -1;
446 }
447
448 tx_sel = (config->direction & MSP_DIR_TX) > 0;
449 rx_sel = (config->direction & MSP_DIR_RX) > 0;
450 if (!tx_sel && !rx_sel) {
451 dev_err(msp->dev, "%s: Error: No direction selected!\n",
452 __func__);
453 return -EINVAL;
454 }
455
456 tx_busy = (msp->dir_busy & MSP_DIR_TX) > 0;
457 rx_busy = (msp->dir_busy & MSP_DIR_RX) > 0;
458 if (tx_busy && tx_sel) {
459 dev_err(msp->dev, "%s: Error: TX is in use!\n", __func__);
460 return -EBUSY;
461 }
462 if (rx_busy && rx_sel) {
463 dev_err(msp->dev, "%s: Error: RX is in use!\n", __func__);
464 return -EBUSY;
465 }
466
467 msp->dir_busy |= (tx_sel ? MSP_DIR_TX : 0) | (rx_sel ? MSP_DIR_RX : 0);
468
469 /* First do the global config register */
470 mask = RX_CLK_SEL_MASK | TX_CLK_SEL_MASK | RX_FSYNC_MASK |
471 TX_FSYNC_MASK | RX_SYNC_SEL_MASK | TX_SYNC_SEL_MASK |
472 RX_FIFO_ENABLE_MASK | TX_FIFO_ENABLE_MASK | SRG_CLK_SEL_MASK |
473 LOOPBACK_MASK | TX_EXTRA_DELAY_MASK;
474
475 new_reg = (config->tx_clk_sel | config->rx_clk_sel |
476 config->rx_fsync_pol | config->tx_fsync_pol |
477 config->rx_fsync_sel | config->tx_fsync_sel |
478 config->rx_fifo_config | config->tx_fifo_config |
479 config->srg_clk_sel | config->loopback_enable |
480 config->tx_data_enable);
481
482 old_reg = readl(msp->registers + MSP_GCR);
483 old_reg &= ~mask;
484 new_reg |= old_reg;
485 writel(new_reg, msp->registers + MSP_GCR);
486
487 res = enable_msp(msp, config);
488 if (res < 0) {
489 dev_err(msp->dev, "%s: ERROR: enable_msp failed (%d)!\n",
490 __func__, res);
491 return -EBUSY;
492 }
493 if (config->loopback_enable & 0x80)
494 msp->loopback_enable = 1;
495
496 /* Flush FIFOs */
497 flush_fifo_tx(msp);
498 flush_fifo_rx(msp);
499
500 msp->msp_state = MSP_STATE_CONFIGURED;
501 return 0;
502}
503
504static void disable_msp_rx(struct ux500_msp *msp)
505{
506 u32 reg_val_GCR, reg_val_DMACR, reg_val_IMSC;
507
508 reg_val_GCR = readl(msp->registers + MSP_GCR);
509 writel(reg_val_GCR & ~RX_ENABLE, msp->registers + MSP_GCR);
510 reg_val_DMACR = readl(msp->registers + MSP_DMACR);
511 writel(reg_val_DMACR & ~RX_DMA_ENABLE, msp->registers + MSP_DMACR);
512 reg_val_IMSC = readl(msp->registers + MSP_IMSC);
513 writel(reg_val_IMSC &
514 ~(RX_SERVICE_INT | RX_OVERRUN_ERROR_INT),
515 msp->registers + MSP_IMSC);
516
517 msp->dir_busy &= ~MSP_DIR_RX;
518}
519
520static void disable_msp_tx(struct ux500_msp *msp)
521{
522 u32 reg_val_GCR, reg_val_DMACR, reg_val_IMSC;
523
524 reg_val_GCR = readl(msp->registers + MSP_GCR);
525 writel(reg_val_GCR & ~TX_ENABLE, msp->registers + MSP_GCR);
526 reg_val_DMACR = readl(msp->registers + MSP_DMACR);
527 writel(reg_val_DMACR & ~TX_DMA_ENABLE, msp->registers + MSP_DMACR);
528 reg_val_IMSC = readl(msp->registers + MSP_IMSC);
529 writel(reg_val_IMSC &
530 ~(TX_SERVICE_INT | TX_UNDERRUN_ERR_INT),
531 msp->registers + MSP_IMSC);
532
533 msp->dir_busy &= ~MSP_DIR_TX;
534}
535
536static int disable_msp(struct ux500_msp *msp, unsigned int dir)
537{
538 u32 reg_val_GCR;
539 int status = 0;
540 unsigned int disable_tx, disable_rx;
541
542 reg_val_GCR = readl(msp->registers + MSP_GCR);
543 disable_tx = dir & MSP_DIR_TX;
544 disable_rx = dir & MSP_DIR_TX;
545 if (disable_tx && disable_rx) {
546 reg_val_GCR = readl(msp->registers + MSP_GCR);
547 writel(reg_val_GCR | LOOPBACK_MASK,
548 msp->registers + MSP_GCR);
549
550 /* Flush TX-FIFO */
551 flush_fifo_tx(msp);
552
553 /* Disable TX-channel */
554 writel((readl(msp->registers + MSP_GCR) &
555 (~TX_ENABLE)), msp->registers + MSP_GCR);
556
557 /* Flush RX-FIFO */
558 flush_fifo_rx(msp);
559
560 /* Disable Loopback and Receive channel */
561 writel((readl(msp->registers + MSP_GCR) &
562 (~(RX_ENABLE | LOOPBACK_MASK))),
563 msp->registers + MSP_GCR);
564
565 disable_msp_tx(msp);
566 disable_msp_rx(msp);
567 } else if (disable_tx)
568 disable_msp_tx(msp);
569 else if (disable_rx)
570 disable_msp_rx(msp);
571
572 return status;
573}
574
575int ux500_msp_i2s_trigger(struct ux500_msp *msp, int cmd, int direction)
576{
577 u32 reg_val_GCR, enable_bit;
578
579 if (msp->msp_state == MSP_STATE_IDLE) {
580 dev_err(msp->dev, "%s: ERROR: MSP is not configured!\n",
581 __func__);
582 return -EINVAL;
583 }
584
585 switch (cmd) {
586 case SNDRV_PCM_TRIGGER_START:
587 case SNDRV_PCM_TRIGGER_RESUME:
588 case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
589 if (direction == SNDRV_PCM_STREAM_PLAYBACK)
590 enable_bit = TX_ENABLE;
591 else
592 enable_bit = RX_ENABLE;
593 reg_val_GCR = readl(msp->registers + MSP_GCR);
594 writel(reg_val_GCR | enable_bit, msp->registers + MSP_GCR);
595 break;
596
597 case SNDRV_PCM_TRIGGER_STOP:
598 case SNDRV_PCM_TRIGGER_SUSPEND:
599 case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
600 if (direction == SNDRV_PCM_STREAM_PLAYBACK)
601 disable_msp_tx(msp);
602 else
603 disable_msp_rx(msp);
604 break;
605 default:
606 return -EINVAL;
607 break;
608 }
609
610 return 0;
611}
612
613int ux500_msp_i2s_close(struct ux500_msp *msp, unsigned int dir)
614{
6ee0b4b0 615 int status = 0;
3592b7f6
OL		 616
617 dev_dbg(msp->dev, "%s: Enter (dir = 0x%01x).\n", __func__, dir);
618
619 status = disable_msp(msp, dir);
620 if (msp->dir_busy == 0) {
621 /* disable sample rate and frame generators */
622 msp->msp_state = MSP_STATE_IDLE;
623 writel((readl(msp->registers + MSP_GCR) &
624 (~(FRAME_GEN_ENABLE | SRG_ENABLE))),
625 msp->registers + MSP_GCR);
5ca032ee 626
3592b7f6
OL		 627 writel(0, msp->registers + MSP_GCR);
628 writel(0, msp->registers + MSP_TCF);
629 writel(0, msp->registers + MSP_RCF);
630 writel(0, msp->registers + MSP_DMACR);
631 writel(0, msp->registers + MSP_SRG);
632 writel(0, msp->registers + MSP_MCR);
633 writel(0, msp->registers + MSP_RCM);
634 writel(0, msp->registers + MSP_RCV);
635 writel(0, msp->registers + MSP_TCE0);
636 writel(0, msp->registers + MSP_TCE1);
637 writel(0, msp->registers + MSP_TCE2);
638 writel(0, msp->registers + MSP_TCE3);
639 writel(0, msp->registers + MSP_RCE0);
640 writel(0, msp->registers + MSP_RCE1);
641 writel(0, msp->registers + MSP_RCE2);
642 writel(0, msp->registers + MSP_RCE3);
643 }
644
645 return status;
646
647}
648
7ee4518a
WY		 649static int ux500_msp_i2s_of_init_msp(struct platform_device *pdev,
650 struct ux500_msp *msp,
651 struct msp_i2s_platform_data **platform_data)
05c56c24
LJ		 652{
653 struct msp_i2s_platform_data *pdata;
654
655 *platform_data = devm_kzalloc(&pdev->dev,
656 sizeof(struct msp_i2s_platform_data),
657 GFP_KERNEL);
658 pdata = *platform_data;
659 if (!pdata)
660 return -ENOMEM;
661
662 msp->playback_dma_data.dma_cfg = devm_kzalloc(&pdev->dev,
663 sizeof(struct stedma40_chan_cfg),
664 GFP_KERNEL);
665 if (!msp->playback_dma_data.dma_cfg)
666 return -ENOMEM;
667
668 msp->capture_dma_data.dma_cfg = devm_kzalloc(&pdev->dev,
669 sizeof(struct stedma40_chan_cfg),
670 GFP_KERNEL);
671 if (!msp->capture_dma_data.dma_cfg)
672 return -ENOMEM;
673
674 return 0;
675}
676
3592b7f6
OL		 677int ux500_msp_i2s_init_msp(struct platform_device *pdev,
678 struct ux500_msp **msp_p,
679 struct msp_i2s_platform_data *platform_data)
680{
3592b7f6 681 struct resource *res = NULL;
49731c23 682 struct device_node *np = pdev->dev.of_node;
3592b7f6 683 struct ux500_msp *msp;
05c56c24 684 int ret;
3592b7f6 685
3592b7f6
OL		 686 *msp_p = devm_kzalloc(&pdev->dev, sizeof(struct ux500_msp), GFP_KERNEL);
687 msp = *msp_p;
0dcd4742
LJ		 688 if (!msp)
689 return -ENOMEM;
3592b7f6 690
05c56c24
LJ		 691 if (!platform_data) {
692 if (np) {
693 ret = ux500_msp_i2s_of_init_msp(pdev, msp,
694 &platform_data);
695 if (ret)
696 return ret;
697 } else
05304949 698 return -EINVAL;
05c56c24
LJ		 699 } else {
700 msp->playback_dma_data.dma_cfg = platform_data->msp_i2s_dma_tx;
701 msp->capture_dma_data.dma_cfg = platform_data->msp_i2s_dma_rx;
702 msp->id = platform_data->id;
703 }
49731c23 704
3592b7f6 705 msp->dev = &pdev->dev;
3592b7f6
OL		 706
707 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
708 if (res == NULL) {
709 dev_err(&pdev->dev, "%s: ERROR: Unable to get resource!\n",
710 __func__);
b18e93a4 711 return -ENOMEM;
3592b7f6
OL		 712 }
713
20413113
FB		 714 msp->playback_dma_data.tx_rx_addr = res->start + MSP_DR;
715 msp->capture_dma_data.tx_rx_addr = res->start + MSP_DR;
716
b18e93a4
JL		 717 msp->registers = devm_ioremap(&pdev->dev, res->start,
718 resource_size(res));
3592b7f6
OL		 719 if (msp->registers == NULL) {
720 dev_err(&pdev->dev, "%s: ERROR: ioremap failed!\n", __func__);
b18e93a4 721 return -ENOMEM;
3592b7f6
OL		 722 }
723
724 msp->msp_state = MSP_STATE_IDLE;
725 msp->loopback_enable = 0;
726
3592b7f6 727 return 0;
3592b7f6
OL		 728}
729
730void ux500_msp_i2s_cleanup_msp(struct platform_device *pdev,
731 struct ux500_msp *msp)
732{
733 dev_dbg(msp->dev, "%s: Enter (id = %d).\n", __func__, msp->id);
3592b7f6
OL		 734}
735
85f24391 736MODULE_LICENSE("GPL v2");
Linux kernel - Deliverables
This page took 0.120451 seconds and 5 git commands to generate.