| | 1 | [+ AutoGen5 template -*- Mode: Makefile -*- |
| | 2 | in |
| | 3 | +] |
| | 4 | |
| | 5 | # Makefile.in is generated from Makefile.tpl by 'autogen Makefile.def'. |
| | 6 | # |
| | 7 | # Makefile for directory with subdirs to build. |
| | 8 | # Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, |
| | 9 | # 1999, 2000, 2001, 2002, 2003 Free Software Foundation |
| | 10 | # |
| | 11 | # This file is free software; you can redistribute it and/or modify |
| | 12 | # it under the terms of the GNU General Public License as published by |
| | 13 | # the Free Software Foundation; either version 2 of the License, or |
| | 14 | # (at your option) any later version. |
| | 15 | # |
| | 16 | # This program is distributed in the hope that it will be useful, |
| | 17 | # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| | 18 | # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| | 19 | # GNU General Public License for more details. |
| | 20 | # |
| | 21 | # You should have received a copy of the GNU General Public License |
| | 22 | # along with this program; if not, write to the Free Software |
| | 23 | # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| | 24 | # |
| | 25 | |
| | 26 | # ------------------------------- |
| | 27 | # Standard Autoconf-set variables |
| | 28 | # ------------------------------- |
| | 29 | VPATH=@srcdir@ |
| | 30 | |
| | 31 | build_alias=@build_alias@ |
| | 32 | build=@build@ |
| | 33 | host_alias=@host_alias@ |
| | 34 | host=@host@ |
| | 35 | target_alias=@target_alias@ |
| | 36 | target=@target@ |
| | 37 | |
| | 38 | program_transform_name = @program_transform_name@ |
| | 39 | |
| | 40 | prefix = @prefix@ |
| | 41 | exec_prefix = @exec_prefix@ |
| | 42 | |
| | 43 | srcdir = @srcdir@ |
| | 44 | |
| | 45 | bindir = @bindir@ |
| | 46 | sbindir = @sbindir@ |
| | 47 | libexecdir = @libexecdir@ |
| | 48 | datadir = @datadir@ |
| | 49 | sysconfdir = @sysconfdir@ |
| | 50 | sharedstatedir = @sharedstatedir@ |
| | 51 | localstatedir = @localstatedir@ |
| | 52 | libdir = @libdir@ |
| | 53 | includedir = @includedir@ |
| | 54 | oldincludedir = @oldincludedir@ |
| | 55 | infodir = @infodir@ |
| | 56 | mandir = @mandir@ |
| | 57 | man1dir = $(mandir)/man1 |
| | 58 | man2dir = $(mandir)/man2 |
| | 59 | man3dir = $(mandir)/man3 |
| | 60 | man4dir = $(mandir)/man4 |
| | 61 | man5dir = $(mandir)/man5 |
| | 62 | man6dir = $(mandir)/man6 |
| | 63 | man7dir = $(mandir)/man7 |
| | 64 | man8dir = $(mandir)/man8 |
| | 65 | man9dir = $(mandir)/man9 |
| | 66 | |
| | 67 | INSTALL = @INSTALL@ |
| | 68 | INSTALL_PROGRAM = @INSTALL_PROGRAM@ |
| | 69 | INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
| | 70 | INSTALL_DATA = @INSTALL_DATA@ |
| | 71 | |
| | 72 | # ------------------------------------------------- |
| | 73 | # Miscellaneous non-standard autoconf-set variables |
| | 74 | # ------------------------------------------------- |
| | 75 | |
| | 76 | # The file containing GCC's version number. |
| | 77 | gcc_version_trigger = @gcc_version_trigger@ |
| | 78 | gcc_version = @gcc_version@ |
| | 79 | |
| | 80 | # The gcc driver likes to know the arguments it was configured with. |
| | 81 | TOPLEVEL_CONFIGURE_ARGUMENTS=@TOPLEVEL_CONFIGURE_ARGUMENTS@ |
| | 82 | |
| | 83 | gxx_include_dir = @gxx_include_dir@ |
| | 84 | libstdcxx_incdir = @libstdcxx_incdir@ |
| | 85 | |
| | 86 | tooldir = @tooldir@ |
| | 87 | build_tooldir = @build_tooldir@ |
| | 88 | |
| | 89 | # Directory in which the compiler finds executables, libraries, etc. |
| | 90 | libsubdir = $(libdir)/gcc/$(target_alias)/$(gcc_version) |
| | 91 | GDB_NLM_DEPS = |
| | 92 | |
| | 93 | # This is the name of the environment variable used for the path to |
| | 94 | # the libraries. |
| | 95 | RPATH_ENVVAR = @RPATH_ENVVAR@ |
| | 96 | |
| | 97 | # This is set by configure to REALLY_SET_LIB_PATH if --enable-shared |
| | 98 | # was used. |
| | 99 | SET_LIB_PATH = @SET_LIB_PATH@ |
| | 100 | |
| | 101 | # configure.in sets SET_LIB_PATH to this if --enable-shared was used. |
| | 102 | # Some platforms don't like blank entries, so we remove duplicate, |
| | 103 | # leading and trailing colons. |
| | 104 | REALLY_SET_LIB_PATH = \ |
| | 105 | $(RPATH_ENVVAR)=`echo "$(HOST_LIB_PATH):$(TARGET_LIB_PATH):$$$(RPATH_ENVVAR)" | sed 's,::*,:,g;s,^:*,,;s,:*$$,,'`; export $(RPATH_ENVVAR); |
| | 106 | |
| | 107 | # This is the list of directories to be built for the build system. |
| | 108 | BUILD_CONFIGDIRS = libiberty |
| | 109 | # Build programs are put under this directory. |
| | 110 | BUILD_SUBDIR = @build_subdir@ |
| | 111 | # This is set by the configure script to the arguments to use when configuring |
| | 112 | # directories built for the build system. |
| | 113 | BUILD_CONFIGARGS = @build_configargs@ |
| | 114 | |
| | 115 | # This is the list of directories to built for the host system. |
| | 116 | SUBDIRS = @configdirs@ |
| | 117 | # This is set by the configure script to the arguments to use when configuring |
| | 118 | # directories built for the host system. |
| | 119 | HOST_CONFIGARGS = @host_configargs@ |
| | 120 | |
| | 121 | # This is set by the configure script to the list of directories which |
| | 122 | # should be built using the target tools. |
| | 123 | TARGET_CONFIGDIRS = @target_configdirs@ |
| | 124 | # Target libraries are put under this directory: |
| | 125 | TARGET_SUBDIR = @target_subdir@ |
| | 126 | # This is set by the configure script to the arguments to use when configuring |
| | 127 | # directories built for the target. |
| | 128 | TARGET_CONFIGARGS = @target_configargs@ |
| | 129 | |
| | 130 | # ---------------------------------------------- |
| | 131 | # Programs producing files for the BUILD machine |
| | 132 | # ---------------------------------------------- |
| | 133 | |
| | 134 | SHELL = @config_shell@ |
| | 135 | |
| | 136 | # pwd command to use. Allow user to override default by setting PWDCMD in |
| | 137 | # the environment to account for automounters. The make variable must not |
| | 138 | # be called PWDCMD, otherwise the value set here is passed to make |
| | 139 | # subprocesses and overrides the setting from the user's environment. |
| | 140 | # Don't use PWD since it is a common shell environment variable and we |
| | 141 | # don't want to corrupt it. |
| | 142 | PWD_COMMAND = $${PWDCMD-pwd} |
| | 143 | |
| | 144 | # compilers to use to create programs which must be run in the build |
| | 145 | # environment. |
| | 146 | CC_FOR_BUILD = @CC_FOR_BUILD@ |
| | 147 | CFLAGS_FOR_BUILD = @CFLAGS_FOR_BUILD@ |
| | 148 | |
| | 149 | CXX_FOR_BUILD = $(CXX) |
| | 150 | |
| | 151 | # Special variables passed down in EXTRA_GCC_FLAGS. They are defined |
| | 152 | # here so that they can be overridden by Makefile fragments. |
| | 153 | BUILD_PREFIX = @BUILD_PREFIX@ |
| | 154 | BUILD_PREFIX_1 = @BUILD_PREFIX_1@ |
| | 155 | |
| | 156 | BISON=@BISON@ |
| | 157 | USUAL_BISON = `if [ -f $$r/bison/bison ] ; then \ |
| | 158 | echo $$r/bison/bison -L $$s/bison/ ; \ |
| | 159 | else \ |
| | 160 | echo bison ; \ |
| | 161 | fi` |
| | 162 | |
| | 163 | DEFAULT_YACC = @DEFAULT_YACC@ |
| | 164 | YACC=@YACC@ |
| | 165 | USUAL_YACC = `if [ -f $$r/bison/bison ] ; then \ |
| | 166 | echo $$r/bison/bison -y -L $$s/bison/ ; \ |
| | 167 | elif [ -f $$r/byacc/byacc ] ; then \ |
| | 168 | echo $$r/byacc/byacc ; \ |
| | 169 | else \ |
| | 170 | echo ${DEFAULT_YACC} ; \ |
| | 171 | fi` |
| | 172 | |
| | 173 | DEFAULT_LEX = @DEFAULT_LEX@ |
| | 174 | LEX=@LEX@ |
| | 175 | USUAL_LEX = `if [ -f $$r/flex/flex ] ; \ |
| | 176 | then echo $$r/flex/flex ; \ |
| | 177 | else echo ${DEFAULT_LEX} ; fi` |
| | 178 | |
| | 179 | DEFAULT_M4 = @DEFAULT_M4@ |
| | 180 | M4 = `if [ -f $$r/m4/m4 ] ; \ |
| | 181 | then echo $$r/m4/m4 ; \ |
| | 182 | else echo ${DEFAULT_M4} ; fi` |
| | 183 | |
| | 184 | # For an installed makeinfo, we require it to be from texinfo 4.2 or |
| | 185 | # higher, else we use the "missing" dummy. |
| | 186 | MAKEINFO=@MAKEINFO@ |
| | 187 | USUAL_MAKEINFO = `if [ -f $$r/texinfo/makeinfo/makeinfo ] ; \ |
| | 188 | then echo $$r/texinfo/makeinfo/makeinfo ; \ |
| | 189 | else if (makeinfo --version \ |
| | 190 | | egrep 'texinfo[^0-9]*([1-3][0-9]|4\.[2-9]|[5-9])') >/dev/null 2>&1; \ |
| | 191 | then echo makeinfo; else echo $$s/missing makeinfo; fi; fi` |
| | 192 | |
| | 193 | # This just becomes part of the MAKEINFO definition passed down to |
| | 194 | # sub-makes. It lets flags be given on the command line while still |
| | 195 | # using the makeinfo from the object tree. |
| | 196 | # (Default to avoid splitting info files by setting the threshold high.) |
| | 197 | MAKEINFOFLAGS = --split-size=5000000 |
| | 198 | |
| | 199 | EXPECT = `if [ -f $$r/expect/expect ] ; \ |
| | 200 | then echo $$r/expect/expect ; \ |
| | 201 | else echo expect ; fi` |
| | 202 | |
| | 203 | RUNTEST = `if [ -f $$s/dejagnu/runtest ] ; \ |
| | 204 | then echo $$s/dejagnu/runtest ; \ |
| | 205 | else echo runtest ; fi` |
| | 206 | |
| | 207 | # --------------------------------------------- |
| | 208 | # Programs producing files for the HOST machine |
| | 209 | # --------------------------------------------- |
| | 210 | |
| | 211 | # This is the list of directories that may be needed in RPATH_ENVVAR |
| | 212 | # so that programs built for the host machine work. |
| | 213 | HOST_LIB_PATH = $$r/bfd:$$r/opcodes |
| | 214 | |
| | 215 | AS = @AS@ |
| | 216 | |
| | 217 | AR = @AR@ |
| | 218 | AR_FLAGS = rc |
| | 219 | |
| | 220 | CC = @CC@ |
| | 221 | CFLAGS = @CFLAGS@ |
| | 222 | LIBCFLAGS = $(CFLAGS) |
| | 223 | |
| | 224 | CXX = @CXX@ |
| | 225 | CXXFLAGS = @CXXFLAGS@ |
| | 226 | LIBCXXFLAGS = $(CXXFLAGS) -fno-implicit-templates |
| | 227 | |
| | 228 | DLLTOOL = @DLLTOOL@ |
| | 229 | |
| | 230 | NM = @NM@ |
| | 231 | |
| | 232 | LD = @LD@ |
| | 233 | LDFLAGS = |
| | 234 | |
| | 235 | RANLIB = @RANLIB@ |
| | 236 | |
| | 237 | WINDRES = @WINDRES@ |
| | 238 | |
| | 239 | PICFLAG = |
| | 240 | |
| | 241 | # ----------------------------------------------- |
| | 242 | # Programs producing files for the TARGET machine |
| | 243 | # ----------------------------------------------- |
| | 244 | |
| | 245 | # This is the list of directories that may be needed in RPATH_ENVVAR |
| | 246 | # so that prorgams built for the target machine work. |
| | 247 | TARGET_LIB_PATH = $$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs: |
| | 248 | |
| | 249 | FLAGS_FOR_TARGET = @FLAGS_FOR_TARGET@ |
| | 250 | |
| | 251 | AR_FOR_TARGET=@AR_FOR_TARGET@ |
| | 252 | CONFIGURED_AR_FOR_TARGET=@CONFIGURED_AR_FOR_TARGET@ |
| | 253 | USUAL_AR_FOR_TARGET = ` \ |
| | 254 | if [ -f $$r/binutils/ar ] ; then \ |
| | 255 | echo $$r/binutils/ar ; \ |
| | 256 | else \ |
| | 257 | if [ '$(host)' = '$(target)' ] ; then \ |
| | 258 | echo $(AR); \ |
| | 259 | else \ |
| | 260 | echo $(CONFIGURED_AR_FOR_TARGET) ; \ |
| | 261 | fi; \ |
| | 262 | fi` |
| | 263 | |
| | 264 | AS_FOR_TARGET=@AS_FOR_TARGET@ |
| | 265 | CONFIGURED_AS_FOR_TARGET=@CONFIGURED_AS_FOR_TARGET@ |
| | 266 | USUAL_AS_FOR_TARGET = ` \ |
| | 267 | if [ -f $$r/gas/as-new ] ; then \ |
| | 268 | echo $$r/gas/as-new ; \ |
| | 269 | elif [ -f $$r/gcc/xgcc ]; then \ |
| | 270 | $(CC_FOR_TARGET) -print-prog-name=as ; \ |
| | 271 | else \ |
| | 272 | if [ '$(host)' = '$(target)' ] ; then \ |
| | 273 | echo $(AS); \ |
| | 274 | else \ |
| | 275 | echo $(CONFIGURED_AS_FOR_TARGET) ; \ |
| | 276 | fi; \ |
| | 277 | fi` |
| | 278 | |
| | 279 | CC_FOR_TARGET = @CC_FOR_TARGET@ |
| | 280 | # During gcc bootstrap, if we use some random cc for stage1 then |
| | 281 | # CFLAGS will be just -g. We want to ensure that TARGET libraries |
| | 282 | # (which we know are built with gcc) are built with optimizations so |
| | 283 | # prepend -O2 when setting CFLAGS_FOR_TARGET. |
| | 284 | CFLAGS_FOR_TARGET = -O2 $(CFLAGS) |
| | 285 | # If GCC_FOR_TARGET is not overriden on the command line, then this |
| | 286 | # variable is passed down to the gcc Makefile, where it is used to |
| | 287 | # build libgcc2.a. We define it here so that it can itself be |
| | 288 | # overridden on the command line. |
| | 289 | GCC_FOR_TARGET=@GCC_FOR_TARGET@ |
| | 290 | USUAL_GCC_FOR_TARGET = $(STAGE_CC_WRAPPER) $$r/gcc/xgcc -B$$r/gcc/ $(FLAGS_FOR_TARGET) |
| | 291 | LIBCFLAGS_FOR_TARGET = $(CFLAGS_FOR_TARGET) |
| | 292 | |
| | 293 | CXX_FOR_TARGET = @CXX_FOR_TARGET@ |
| | 294 | RAW_CXX_FOR_TARGET = @RAW_CXX_FOR_TARGET@ |
| | 295 | CXX_FOR_TARGET_FOR_RECURSIVE_MAKE = @CXX_FOR_TARGET_FOR_RECURSIVE_MAKE@ |
| | 296 | RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE = @RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE@ |
| | 297 | CXXFLAGS_FOR_TARGET = $(CXXFLAGS) |
| | 298 | LIBCXXFLAGS_FOR_TARGET = $(CXXFLAGS_FOR_TARGET) -fno-implicit-templates |
| | 299 | |
| | 300 | DLLTOOL_FOR_TARGET=@DLLTOOL_FOR_TARGET@ |
| | 301 | CONFIGURED_DLLTOOL_FOR_TARGET=@CONFIGURED_DLLTOOL_FOR_TARGET@ |
| | 302 | USUAL_DLLTOOL_FOR_TARGET = ` \ |
| | 303 | if [ -f $$r/binutils/dlltool ] ; then \ |
| | 304 | echo $$r/binutils/dlltool ; \ |
| | 305 | else \ |
| | 306 | if [ '$(host)' = '$(target)' ] ; then \ |
| | 307 | echo $(DLLTOOL); \ |
| | 308 | else \ |
| | 309 | echo $(CONFIGURED_DLLTOOL_FOR_TARGET) ; \ |
| | 310 | fi; \ |
| | 311 | fi` |
| | 312 | |
| | 313 | GCJ_FOR_TARGET = @GCJ_FOR_TARGET@ |
| | 314 | |
| | 315 | LD_FOR_TARGET=@LD_FOR_TARGET@ |
| | 316 | CONFIGURED_LD_FOR_TARGET=@CONFIGURED_LD_FOR_TARGET@ |
| | 317 | USUAL_LD_FOR_TARGET = ` \ |
| | 318 | if [ -f $$r/ld/ld-new ] ; then \ |
| | 319 | echo $$r/ld/ld-new ; \ |
| | 320 | elif [ -f $$r/gcc/xgcc ]; then \ |
| | 321 | $(CC_FOR_TARGET) -print-prog-name=ld ; \ |
| | 322 | else \ |
| | 323 | if [ '$(host)' = '$(target)' ] ; then \ |
| | 324 | echo $(LD); \ |
| | 325 | else \ |
| | 326 | echo $(CONFIGURED_LD_FOR_TARGET) ; \ |
| | 327 | fi; \ |
| | 328 | fi` |
| | 329 | |
| | 330 | LDFLAGS_FOR_TARGET = |
| | 331 | |
| | 332 | NM_FOR_TARGET=@NM_FOR_TARGET@ |
| | 333 | CONFIGURED_NM_FOR_TARGET=@CONFIGURED_NM_FOR_TARGET@ |
| | 334 | USUAL_NM_FOR_TARGET = ` \ |
| | 335 | if [ -f $$r/binutils/nm-new ] ; then \ |
| | 336 | echo $$r/binutils/nm-new ; \ |
| | 337 | elif [ -f $$r/gcc/xgcc ]; then \ |
| | 338 | $(CC_FOR_TARGET) -print-prog-name=nm ; \ |
| | 339 | else \ |
| | 340 | if [ '$(host)' = '$(target)' ] ; then \ |
| | 341 | echo $(NM); \ |
| | 342 | else \ |
| | 343 | echo $(CONFIGURED_NM_FOR_TARGET) ; \ |
| | 344 | fi; \ |
| | 345 | fi` |
| | 346 | |
| | 347 | RANLIB_FOR_TARGET=@RANLIB_FOR_TARGET@ |
| | 348 | CONFIGURED_RANLIB_FOR_TARGET=@CONFIGURED_RANLIB_FOR_TARGET@ |
| | 349 | USUAL_RANLIB_FOR_TARGET = ` \ |
| | 350 | if [ -f $$r/binutils/ranlib ] ; then \ |
| | 351 | echo $$r/binutils/ranlib ; \ |
| | 352 | else \ |
| | 353 | if [ '$(host)' = '$(target)' ] ; then \ |
| | 354 | if [ x'$(RANLIB)' != x ]; then \ |
| | 355 | echo $(RANLIB); \ |
| | 356 | else \ |
| | 357 | echo ranlib; \ |
| | 358 | fi; \ |
| | 359 | else \ |
| | 360 | echo $(CONFIGURED_RANLIB_FOR_TARGET) ; \ |
| | 361 | fi; \ |
| | 362 | fi` |
| | 363 | |
| | 364 | WINDRES_FOR_TARGET=@WINDRES_FOR_TARGET@ |
| | 365 | CONFIGURED_WINDRES_FOR_TARGET=@CONFIGURED_WINDRES_FOR_TARGET@ |
| | 366 | USUAL_WINDRES_FOR_TARGET = ` \ |
| | 367 | if [ -f $$r/binutils/windres ] ; then \ |
| | 368 | echo $$r/binutils/windres ; \ |
| | 369 | else \ |
| | 370 | if [ '$(host)' = '$(target)' ] ; then \ |
| | 371 | echo $(WINDRES); \ |
| | 372 | else \ |
| | 373 | echo $(CONFIGURED_WINDRES_FOR_TARGET) ; \ |
| | 374 | fi; \ |
| | 375 | fi` |
| | 376 | |
| | 377 | PICFLAG_FOR_TARGET = |
| | 378 | |
| | 379 | # ------------------------------------ |
| | 380 | # Miscellaneous targets and flag lists |
| | 381 | # ------------------------------------ |
| | 382 | |
| | 383 | # The first rule in the file had better be this one. Don't put any above it. |
| | 384 | # This lives here to allow makefile fragments to contain dependencies. |
| | 385 | all: all.normal |
| | 386 | .PHONY: all |
| | 387 | |
| | 388 | #### host and target specific makefile fragments come in here. |
| | 389 | @target_makefile_frag@ |
| | 390 | @alphaieee_frag@ |
| | 391 | @ospace_frag@ |
| | 392 | @host_makefile_frag@ |
| | 393 | ### |
| | 394 | |
| | 395 | # Flags to pass down to all sub-makes. |
| | 396 | BASE_FLAGS_TO_PASS = [+ FOR flags_to_pass +]\ |
| | 397 | "[+flag+]=$([+flag+])" [+ ENDFOR flags_to_pass +]\ |
| | 398 | "CONFIG_SHELL=$(SHELL)" \ |
| | 399 | "MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" |
| | 400 | |
| | 401 | # For any flags above that may contain shell code that varies from one |
| | 402 | # target library to another. When doing recursive invocations of the |
| | 403 | # top-level Makefile, we don't want the outer make to evaluate them, |
| | 404 | # so we pass these variables down unchanged. They must not contain |
| | 405 | # single nor double quotes. |
| | 406 | RECURSE_FLAGS = \ |
| | 407 | CXX_FOR_TARGET='$(CXX_FOR_TARGET_FOR_RECURSIVE_MAKE)' \ |
| | 408 | RAW_CXX_FOR_TARGET='$(RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE)' \ |
| | 409 | |
| | 410 | # Flags to pass down to most sub-makes, in which we're building with |
| | 411 | # the host environment. |
| | 412 | EXTRA_HOST_FLAGS = \ |
| | 413 | 'AR=$(AR)' \ |
| | 414 | 'AS=$(AS)' \ |
| | 415 | 'CC=$(CC)' \ |
| | 416 | 'CXX=$(CXX)' \ |
| | 417 | 'DLLTOOL=$(DLLTOOL)' \ |
| | 418 | 'LD=$(LD)' \ |
| | 419 | 'NM=$(NM)' \ |
| | 420 | 'RANLIB=$(RANLIB)' \ |
| | 421 | 'WINDRES=$(WINDRES)' |
| | 422 | |
| | 423 | FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_HOST_FLAGS) |
| | 424 | |
| | 425 | # Flags that are concerned with the location of the X11 include files |
| | 426 | # and library files |
| | 427 | # |
| | 428 | # NOTE: until the top-level is getting the values via autoconf, it only |
| | 429 | # causes problems to have this top-level Makefile overriding the autoconf-set |
| | 430 | # values in child directories. Only variables that don't conflict with |
| | 431 | # autoconf'ed ones should be passed by X11_FLAGS_TO_PASS for now. |
| | 432 | # |
| | 433 | X11_FLAGS_TO_PASS = \ |
| | 434 | 'X11_EXTRA_CFLAGS=$(X11_EXTRA_CFLAGS)' \ |
| | 435 | 'X11_EXTRA_LIBS=$(X11_EXTRA_LIBS)' |
| | 436 | |
| | 437 | # Flags to pass down to makes which are built with the target environment. |
| | 438 | # The double $ decreases the length of the command line; the variables |
| | 439 | # are set in BASE_FLAGS_TO_PASS, and the sub-make will expand them. |
| | 440 | EXTRA_TARGET_FLAGS = \ |
| | 441 | 'AR=$$(AR_FOR_TARGET)' \ |
| | 442 | 'AS=$$(AS_FOR_TARGET)' \ |
| | 443 | 'CC=$$(CC_FOR_TARGET)' \ |
| | 444 | 'CFLAGS=$$(CFLAGS_FOR_TARGET)' \ |
| | 445 | 'CXX=$$(CXX_FOR_TARGET)' \ |
| | 446 | 'CXXFLAGS=$$(CXXFLAGS_FOR_TARGET)' \ |
| | 447 | 'DLLTOOL=$$(DLLTOOL_FOR_TARGET)' \ |
| | 448 | 'LD=$$(LD_FOR_TARGET)' \ |
| | 449 | 'LIBCFLAGS=$$(LIBCFLAGS_FOR_TARGET)' \ |
| | 450 | 'LIBCXXFLAGS=$$(LIBCXXFLAGS_FOR_TARGET)' \ |
| | 451 | 'NM=$$(NM_FOR_TARGET)' \ |
| | 452 | 'RANLIB=$$(RANLIB_FOR_TARGET)' \ |
| | 453 | 'WINDRES=$$(WINDRES_FOR_TARGET)' |
| | 454 | |
| | 455 | TARGET_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_TARGET_FLAGS) |
| | 456 | |
| | 457 | # Flags to pass down to gcc. gcc builds a library, libgcc.a, so it |
| | 458 | # unfortunately needs the native compiler and the target ar and |
| | 459 | # ranlib. |
| | 460 | # If any variables are added here, they must be added to do-*, below. |
| | 461 | # The BUILD_* variables are a special case, which are used for the gcc |
| | 462 | # cross-building scheme. |
| | 463 | EXTRA_GCC_FLAGS = \ |
| | 464 | 'BUILD_PREFIX=$(BUILD_PREFIX)' \ |
| | 465 | 'BUILD_PREFIX_1=$(BUILD_PREFIX_1)' \ |
| | 466 | "GCC_FOR_TARGET=$(GCC_FOR_TARGET)" \ |
| | 467 | "CFLAGS_FOR_BUILD=$(CFLAGS_FOR_BUILD)" \ |
| | 468 | "`echo 'LANGUAGES=$(LANGUAGES)' | sed -e s'/[^=][^=]*=$$/XFOO=/'`" \ |
| | 469 | "`echo 'STMP_FIXPROTO=$(STMP_FIXPROTO)' | sed -e s'/[^=][^=]*=$$/XFOO=/'`" \ |
| | 470 | "`echo 'LIMITS_H_TEST=$(LIMITS_H_TEST)' | sed -e s'/[^=][^=]*=$$/XFOO=/'`" \ |
| | 471 | "`echo 'LIBGCC2_CFLAGS=$(LIBGCC2_CFLAGS)' | sed -e s'/[^=][^=]*=$$/XFOO=/'`" \ |
| | 472 | "`echo 'LIBGCC2_DEBUG_CFLAGS=$(LIBGCC2_DEBUG_CFLAGS)' | sed -e s'/[^=][^=]*=$$/XFOO=/'`" \ |
| | 473 | "`echo 'LIBGCC2_INCLUDES=$(LIBGCC2_INCLUDES)' | sed -e s'/[^=][^=]*=$$/XFOO=/'`" \ |
| | 474 | "`echo 'STAGE1_CFLAGS=$(STAGE1_CFLAGS)' | sed -e s'/[^=][^=]*=$$/XFOO=/'`" \ |
| | 475 | "`echo 'BOOT_CFLAGS=$(BOOT_CFLAGS)' | sed -e s'/[^=][^=]*=$$/XFOO=/'`" \ |
| | 476 | "`echo 'BOOT_ADAFLAGS=$(BOOT_ADAFLAGS)' | sed -e s'/[^=][^=]*=$$/XFOO=/'`" |
| | 477 | |
| | 478 | GCC_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_HOST_FLAGS) $(EXTRA_GCC_FLAGS) |
| | 479 | |
| | 480 | .PHONY: configure-host |
| | 481 | configure-host: maybe-configure-gcc [+ |
| | 482 | FOR host_modules +] \ |
| | 483 | maybe-configure-[+module+][+ |
| | 484 | ENDFOR host_modules +] |
| | 485 | .PHONY: configure-target |
| | 486 | configure-target: [+ |
| | 487 | FOR target_modules +] \ |
| | 488 | maybe-configure-target-[+module+][+ |
| | 489 | ENDFOR target_modules +] |
| | 490 | |
| | 491 | # The target built for a native build. |
| | 492 | .PHONY: all.normal |
| | 493 | all.normal: @all_build_modules@ all-host all-target |
| | 494 | |
| | 495 | .PHONY: all-host |
| | 496 | all-host: maybe-all-gcc [+ |
| | 497 | FOR host_modules +] \ |
| | 498 | maybe-all-[+module+][+ |
| | 499 | ENDFOR host_modules +] |
| | 500 | .PHONY: all-target |
| | 501 | all-target: [+ |
| | 502 | FOR target_modules +] \ |
| | 503 | maybe-all-target-[+module+][+ |
| | 504 | ENDFOR target_modules +] |
| | 505 | |
| | 506 | # Do a target for all the subdirectories. A ``make do-X'' will do a |
| | 507 | # ``make X'' in all subdirectories (because, in general, there is a |
| | 508 | # dependency (below) of X upon do-X, a ``make X'' will also do this, |
| | 509 | # but it may do additional work as well). |
| | 510 | [+ FOR recursive_targets +] |
| | 511 | .PHONY: do-[+make_target+] |
| | 512 | do-[+make_target+]: [+make_target+]-host [+make_target+]-target |
| | 513 | |
| | 514 | .PHONY: [+make_target+]-host |
| | 515 | [+make_target+]-host: maybe-[+make_target+]-gcc [+ |
| | 516 | FOR host_modules +] \ |
| | 517 | maybe-[+make_target+]-[+module+][+ |
| | 518 | ENDFOR host_modules +] |
| | 519 | |
| | 520 | .PHONY: [+make_target+]-target |
| | 521 | [+make_target+]-target: [+ |
| | 522 | FOR target_modules +] \ |
| | 523 | maybe-[+make_target+]-target-[+module+][+ |
| | 524 | ENDFOR target_modules +] |
| | 525 | [+ ENDFOR recursive_targets +] |
| | 526 | |
| | 527 | # Here are the targets which correspond to the do-X targets. |
| | 528 | |
| | 529 | .PHONY: info installcheck dvi install-info |
| | 530 | .PHONY: clean distclean mostlyclean maintainer-clean realclean |
| | 531 | .PHONY: local-clean local-distclean local-maintainer-clean |
| | 532 | info: do-info |
| | 533 | installcheck: do-installcheck |
| | 534 | dvi: do-dvi |
| | 535 | |
| | 536 | # Make sure makeinfo is built before we do a `make info', if we're |
| | 537 | # in fact building texinfo. |
| | 538 | do-info: maybe-all-texinfo |
| | 539 | |
| | 540 | install-info: do-install-info dir.info |
| | 541 | s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ |
| | 542 | if [ -f dir.info ] ; then \ |
| | 543 | $(INSTALL_DATA) dir.info $(DESTDIR)$(infodir)/dir.info ; \ |
| | 544 | else true ; fi |
| | 545 | |
| | 546 | local-clean: |
| | 547 | -rm -f *.a TEMP errs core *.o *~ \#* TAGS *.E *.log |
| | 548 | |
| | 549 | local-distclean: |
| | 550 | -rm -f Makefile config.status config.cache mh-frag mt-frag |
| | 551 | -rm -f multilib.out multilib.tmp maybedep.tmp serdep.tmp |
| | 552 | -if [ "$(TARGET_SUBDIR)" != "." ]; then \ |
| | 553 | rm -rf $(TARGET_SUBDIR); \ |
| | 554 | else true; fi |
| | 555 | -rm -rf $(BUILD_SUBDIR) |
| | 556 | -rm -f texinfo/po/Makefile texinfo/po/Makefile.in texinfo/info/Makefile |
| | 557 | -rm -f texinfo/doc/Makefile texinfo/po/POTFILES |
| | 558 | -rmdir texinfo/doc texinfo/info texinfo/intl texinfo/lib 2>/dev/null |
| | 559 | -rmdir texinfo/makeinfo texinfo/po texinfo/util 2>/dev/null |
| | 560 | -rmdir fastjar gcc libiberty texinfo zlib 2>/dev/null |
| | 561 | |
| | 562 | local-maintainer-clean: |
| | 563 | @echo "This command is intended for maintainers to use;" |
| | 564 | @echo "it deletes files that may require special tools to rebuild." |
| | 565 | |
| | 566 | clean: do-clean local-clean |
| | 567 | mostlyclean: do-mostlyclean local-clean |
| | 568 | distclean: do-distclean local-clean local-distclean |
| | 569 | maintainer-clean: local-maintainer-clean do-maintainer-clean local-clean |
| | 570 | maintainer-clean: local-distclean |
| | 571 | realclean: maintainer-clean |
| | 572 | |
| | 573 | # Extra dependency for clean-target, owing to the mixed nature of gcc |
| | 574 | clean-target: clean-target-libgcc |
| | 575 | clean-target-libgcc: |
| | 576 | test ! -d gcc/libgcc || \ |
| | 577 | (cd gcc/libgcc && find . -type d -print) | \ |
| | 578 | while read d; do rm -f gcc/$$d/libgcc.a || : ; done |
| | 579 | -rm -rf gcc/libgcc |
| | 580 | |
| | 581 | # Check target. |
| | 582 | |
| | 583 | .PHONY: check do-check |
| | 584 | check: do-check |
| | 585 | |
| | 586 | # Only include modules actually being configured and built. |
| | 587 | do-check: maybe-check-gcc [+ |
| | 588 | FOR host_modules +] \ |
| | 589 | maybe-check-[+module+][+ |
| | 590 | ENDFOR host_modules +][+ |
| | 591 | FOR target_modules +] \ |
| | 592 | maybe-check-target-[+module+][+ |
| | 593 | ENDFOR target_modules +] |
| | 594 | |
| | 595 | # Automated reporting of test results. |
| | 596 | |
| | 597 | warning.log: build.log |
| | 598 | $(srcdir)/contrib/warn_summary build.log > $@ |
| | 599 | |
| | 600 | mail-report.log: |
| | 601 | if test x'$(BOOT_CFLAGS)' != x''; then \ |
| | 602 | BOOT_CFLAGS='$(BOOT_CFLAGS)'; export BOOT_CFLAGS; \ |
| | 603 | fi; \ |
| | 604 | $(srcdir)/contrib/test_summary -t >$@ |
| | 605 | chmod +x $@ |
| | 606 | echo If you really want to send e-mail, run ./$@ now |
| | 607 | |
| | 608 | mail-report-with-warnings.log: warning.log |
| | 609 | if test x'$(BOOT_CFLAGS)' != x''; then \ |
| | 610 | BOOT_CFLAGS='$(BOOT_CFLAGS)'; export BOOT_CFLAGS; \ |
| | 611 | fi; \ |
| | 612 | $(srcdir)/contrib/test_summary -t -i warning.log >$@ |
| | 613 | chmod +x $@ |
| | 614 | echo If you really want to send e-mail, run ./$@ now |
| | 615 | |
| | 616 | # Installation targets. |
| | 617 | |
| | 618 | .PHONY: install uninstall |
| | 619 | install: installdirs install-host install-target |
| | 620 | |
| | 621 | .PHONY: install-host-nogcc |
| | 622 | install-host-nogcc: [+ |
| | 623 | FOR host_modules +] \ |
| | 624 | maybe-install-[+module+][+ |
| | 625 | ENDFOR host_modules +] |
| | 626 | |
| | 627 | .PHONY: install-host |
| | 628 | install-host: maybe-install-gcc [+ |
| | 629 | FOR host_modules +] \ |
| | 630 | maybe-install-[+module+][+ |
| | 631 | ENDFOR host_modules +] |
| | 632 | |
| | 633 | .PHONY: install-target |
| | 634 | install-target: [+ |
| | 635 | FOR target_modules +] \ |
| | 636 | maybe-install-target-[+module+][+ |
| | 637 | ENDFOR target_modules +] |
| | 638 | |
| | 639 | uninstall: |
| | 640 | @echo "the uninstall target is not supported in this tree" |
| | 641 | |
| | 642 | .PHONY: install.all |
| | 643 | install.all: install-no-fixedincludes |
| | 644 | @if [ -f ./gcc/Makefile ] ; then \ |
| | 645 | r=`${PWD_COMMAND}` ; export r ; \ |
| | 646 | $(SET_LIB_PATH) \ |
| | 647 | (cd ./gcc && \ |
| | 648 | $(MAKE) $(FLAGS_TO_PASS) install-headers) ; \ |
| | 649 | else \ |
| | 650 | true ; \ |
| | 651 | fi |
| | 652 | |
| | 653 | # install-no-fixedincludes is used because Cygnus can not distribute |
| | 654 | # the fixed header files. |
| | 655 | .PHONY: install-no-fixedincludes |
| | 656 | install-no-fixedincludes: installdirs install-host-nogcc \ |
| | 657 | install-target gcc-no-fixedincludes |
| | 658 | |
| | 659 | ### other supporting targets |
| | 660 | |
| | 661 | MAKEDIRS= \ |
| | 662 | $(DESTDIR)$(prefix) \ |
| | 663 | $(DESTDIR)$(exec_prefix) |
| | 664 | .PHONY: installdirs |
| | 665 | installdirs: mkinstalldirs |
| | 666 | $(SHELL) $(srcdir)/mkinstalldirs $(MAKEDIRS) |
| | 667 | |
| | 668 | dir.info: do-install-info |
| | 669 | if [ -f $(srcdir)/texinfo/gen-info-dir ] ; then \ |
| | 670 | $(srcdir)/texinfo/gen-info-dir $(DESTDIR)$(infodir) $(srcdir)/texinfo/dir.info-template > dir.info.new ; \ |
| | 671 | mv -f dir.info.new dir.info ; \ |
| | 672 | else true ; \ |
| | 673 | fi |
| | 674 | |
| | 675 | dist: |
| | 676 | @echo "Building a full distribution of this tree isn't done" |
| | 677 | @echo "via 'make dist'. Check out the etc/ subdirectory" |
| | 678 | |
| | 679 | etags tags: TAGS |
| | 680 | |
| | 681 | # Right now this just builds TAGS in each subdirectory. emacs19 has the |
| | 682 | # ability to use several tags files at once, so there is probably no need |
| | 683 | # to combine them into one big TAGS file (like CVS 1.3 does). We could |
| | 684 | # (if we felt like it) have this Makefile write a piece of elisp which |
| | 685 | # the user could load to tell emacs19 where all the TAGS files we just |
| | 686 | # built are. |
| | 687 | TAGS: do-TAGS |
| | 688 | |
| | 689 | # -------------------------------------- |
| | 690 | # Modules which run on the build machine |
| | 691 | # -------------------------------------- |
| | 692 | [+ FOR build_modules +] |
| | 693 | .PHONY: configure-build-[+module+] maybe-configure-build-[+module+] |
| | 694 | maybe-configure-build-[+module+]: |
| | 695 | configure-build-[+module+]: |
| | 696 | @test ! -f $(BUILD_SUBDIR)/[+module+]/Makefile || exit 0; \ |
| | 697 | $(SHELL) $(srcdir)/mkinstalldirs $(BUILD_SUBDIR)/[+module+] ; \ |
| | 698 | r=`${PWD_COMMAND}`; export r; \ |
| | 699 | s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ |
| | 700 | AR="$(AR_FOR_BUILD)"; export AR; \ |
| | 701 | AS="$(AS_FOR_BUILD)"; export AS; \ |
| | 702 | CC="$(CC_FOR_BUILD)"; export CC; \ |
| | 703 | CFLAGS="$(CFLAGS_FOR_BUILD)"; export CFLAGS; \ |
| | 704 | CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ |
| | 705 | CXX="$(CXX_FOR_BUILD)"; export CXX; \ |
| | 706 | CXXFLAGS="$(CXXFLAGS_FOR_BUILD)"; export CXXFLAGS; \ |
| | 707 | GCJ="$(GCJ_FOR_BUILD)"; export GCJ; \ |
| | 708 | DLLTOOL="$(DLLTOOL_FOR_BUILD)"; export DLLTOOL; \ |
| | 709 | LD="$(LD_FOR_BUILD)"; export LD; \ |
| | 710 | LDFLAGS="$(LDFLAGS_FOR_BUILD)"; export LDFLAGS; \ |
| | 711 | NM="$(NM_FOR_BUILD)"; export NM; \ |
| | 712 | RANLIB="$(RANLIB_FOR_BUILD)"; export RANLIB; \ |
| | 713 | WINDRES="$(WINDRES_FOR_BUILD)"; export WINDRES; \ |
| | 714 | echo Configuring in $(BUILD_SUBDIR)/[+module+]; \ |
| | 715 | cd "$(BUILD_SUBDIR)/[+module+]" || exit 1; \ |
| | 716 | case $(srcdir) in \ |
| | 717 | /* | [A-Za-z]:[\\/]*) \ |
| | 718 | topdir=$(srcdir) ;; \ |
| | 719 | *) \ |
| | 720 | case "$(BUILD_SUBDIR)" in \ |
| | 721 | .) topdir="../$(srcdir)" ;; \ |
| | 722 | *) topdir="../../$(srcdir)" ;; \ |
| | 723 | esac ;; \ |
| | 724 | esac; \ |
| | 725 | if [ "$(srcdir)" = "." ] ; then \ |
| | 726 | if [ "$(BUILD_SUBDIR)" != "." ] ; then \ |
| | 727 | if $(SHELL) $$s/symlink-tree $${topdir}/[+module+] "no-such-file" ; then \ |
| | 728 | if [ -f Makefile ]; then \ |
| | 729 | if $(MAKE) distclean; then \ |
| | 730 | true; \ |
| | 731 | else \ |
| | 732 | exit 1; \ |
| | 733 | fi; \ |
| | 734 | else \ |
| | 735 | true; \ |
| | 736 | fi; \ |
| | 737 | else \ |
| | 738 | exit 1; \ |
| | 739 | fi; \ |
| | 740 | else \ |
| | 741 | true; \ |
| | 742 | fi; \ |
| | 743 | srcdiroption="--srcdir=."; \ |
| | 744 | libsrcdir="."; \ |
| | 745 | else \ |
| | 746 | srcdiroption="--srcdir=$${topdir}/[+module+]"; \ |
| | 747 | libsrcdir="$$s/[+module+]"; \ |
| | 748 | fi; \ |
| | 749 | rm -f no-such-file || : ; \ |
| | 750 | CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \ |
| | 751 | $(BUILD_CONFIGARGS) $${srcdiroption} \ |
| | 752 | --with-build-subdir="$(BUILD_SUBDIR)" \ |
| | 753 | || exit 1 |
| | 754 | |
| | 755 | .PHONY: all-build-[+module+] maybe-all-build-[+module+] |
| | 756 | maybe-all-build-[+module+]: |
| | 757 | all-build-[+module+]: configure-build-[+module+] |
| | 758 | @r=`${PWD_COMMAND}`; export r; \ |
| | 759 | s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ |
| | 760 | (cd $(BUILD_SUBDIR)/[+module+] && $(MAKE) all) |
| | 761 | [+ ENDFOR build_modules +] |
| | 762 | |
| | 763 | # -------------------------------------- |
| | 764 | # Modules which run on the host machine |
| | 765 | # -------------------------------------- |
| | 766 | [+ FOR host_modules +] |
| | 767 | .PHONY: configure-[+module+] maybe-configure-[+module+] |
| | 768 | maybe-configure-[+module+]: |
| | 769 | configure-[+module+]: |
| | 770 | @test ! -f [+module+]/Makefile || exit 0; \ |
| | 771 | [ -d [+module+] ] || mkdir [+module+]; \ |
| | 772 | r=`${PWD_COMMAND}`; export r; \ |
| | 773 | s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ |
| | 774 | CC="$(CC)"; export CC; \ |
| | 775 | CFLAGS="$(CFLAGS)"; export CFLAGS; \ |
| | 776 | CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ |
| | 777 | CXX="$(CXX)"; export CXX; \ |
| | 778 | CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ |
| | 779 | AR="$(AR)"; export AR; \ |
| | 780 | AS="$(AS)"; export AS; \ |
| | 781 | CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ |
| | 782 | DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ |
| | 783 | LD="$(LD)"; export LD; \ |
| | 784 | NM="$(NM)"; export NM; \ |
| | 785 | RANLIB="$(RANLIB)"; export RANLIB; \ |
| | 786 | WINDRES="$(WINDRES)"; export WINDRES; \ |
| | 787 | OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ |
| | 788 | OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ |
| | 789 | echo Configuring in [+module+]; \ |
| | 790 | cd [+module+] || exit 1; \ |
| | 791 | case $(srcdir) in \ |
| | 792 | \.) \ |
| | 793 | srcdiroption="--srcdir=."; \ |
| | 794 | libsrcdir=".";; \ |
| | 795 | /* | [A-Za-z]:[\\/]*) \ |
| | 796 | srcdiroption="--srcdir=$(srcdir)/[+module+]"; \ |
| | 797 | libsrcdir="$$s/[+module+]";; \ |
| | 798 | *) \ |
| | 799 | srcdiroption="--srcdir=../$(srcdir)/[+module+]"; \ |
| | 800 | libsrcdir="$$s/[+module+]";; \ |
| | 801 | esac; \ |
| | 802 | $(SHELL) $${libsrcdir}/configure \ |
| | 803 | $(HOST_CONFIGARGS) $${srcdiroption} \ |
| | 804 | || exit 1 |
| | 805 | |
| | 806 | .PHONY: all-[+module+] maybe-all-[+module+] |
| | 807 | maybe-all-[+module+]: |
| | 808 | all-[+module+]: configure-[+module+] |
| | 809 | @r=`${PWD_COMMAND}`; export r; \ |
| | 810 | s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ |
| | 811 | $(SET_LIB_PATH) \ |
| | 812 | (cd [+module+] && $(MAKE) $(FLAGS_TO_PASS)[+ |
| | 813 | IF with_x |
| | 814 | +] $(X11_FLAGS_TO_PASS)[+ |
| | 815 | ENDIF with_x +] all) |
| | 816 | |
| | 817 | .PHONY: check-[+module+] maybe-check-[+module+] |
| | 818 | maybe-check-[+module+]: |
| | 819 | [+ IF no_check +] |
| | 820 | check-[+module+]: |
| | 821 | [+ ELIF no_check_cross +] |
| | 822 | # This module is only tested in a native toolchain. |
| | 823 | check-[+module+]: |
| | 824 | @if [ '$(host)' = '$(target)' ] ; then \ |
| | 825 | r=`${PWD_COMMAND}`; export r; \ |
| | 826 | s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ |
| | 827 | $(SET_LIB_PATH) \ |
| | 828 | (cd [+module+] && $(MAKE) $(FLAGS_TO_PASS)[+ |
| | 829 | IF with_x |
| | 830 | +] $(X11_FLAGS_TO_PASS)[+ |
| | 831 | ENDIF with_x +] check); \ |
| | 832 | fi |
| | 833 | [+ ELSE check +] |
| | 834 | check-[+module+]: |
| | 835 | @r=`${PWD_COMMAND}`; export r; \ |
| | 836 | s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ |
| | 837 | $(SET_LIB_PATH) \ |
| | 838 | (cd [+module+] && $(MAKE) $(FLAGS_TO_PASS)[+ |
| | 839 | IF with_x |
| | 840 | +] $(X11_FLAGS_TO_PASS)[+ |
| | 841 | ENDIF with_x +] check) |
| | 842 | [+ ENDIF no_check +] |
| | 843 | |
| | 844 | .PHONY: install-[+module+] maybe-install-[+module+] |
| | 845 | maybe-install-[+module+]: |
| | 846 | [+ IF no_install +] |
| | 847 | install-[+module+]: |
| | 848 | [+ ELSE install +] |
| | 849 | install-[+module+]: installdirs |
| | 850 | @r=`${PWD_COMMAND}`; export r; \ |
| | 851 | s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ |
| | 852 | $(SET_LIB_PATH) \ |
| | 853 | (cd [+module+] && $(MAKE) $(FLAGS_TO_PASS)[+ |
| | 854 | IF with_x |
| | 855 | +] $(X11_FLAGS_TO_PASS)[+ |
| | 856 | ENDIF with_x +] install) |
| | 857 | [+ ENDIF no_install +] |
| | 858 | |
| | 859 | # Other targets (info, dvi, etc.) |
| | 860 | [+ FOR recursive_targets +] |
| | 861 | .PHONY: maybe-[+make_target+]-[+module+] [+make_target+]-[+module+] |
| | 862 | maybe-[+make_target+]-[+module+]: |
| | 863 | [+ IF (match-value? = "missing" (get "make_target") ) +] |
| | 864 | # [+module+] doesn't support [+make_target+]. |
| | 865 | [+make_target+]-[+module+]: |
| | 866 | [+ ELSE +] |
| | 867 | [+make_target+]-[+module+]: [+ |
| | 868 | FOR depend +]\ |
| | 869 | [+depend+]-[+module+] [+ |
| | 870 | ENDFOR depend +] |
| | 871 | @[ -f ./[+module+]/Makefile ] || exit 0; \ |
| | 872 | r=`${PWD_COMMAND}`; export r; \ |
| | 873 | s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ |
| | 874 | $(SET_LIB_PATH) \ |
| | 875 | for flag in $(EXTRA_HOST_FLAGS); do \ |
| | 876 | eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ |
| | 877 | done; \ |
| | 878 | echo "Doing [+make_target+] in [+module+]" ; \ |
| | 879 | (cd [+module+] && \ |
| | 880 | $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ |
| | 881 | "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ |
| | 882 | "RANLIB=$${RANLIB}" \ |
| | 883 | "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ |
| | 884 | [+make_target+]) \ |
| | 885 | || exit 1 |
| | 886 | [+ ENDIF +] |
| | 887 | [+ ENDFOR recursive_targets +] |
| | 888 | [+ ENDFOR host_modules +] |
| | 889 | |
| | 890 | # --------------------------------------- |
| | 891 | # Modules which run on the target machine |
| | 892 | # --------------------------------------- |
| | 893 | [+ FOR target_modules +] |
| | 894 | .PHONY: configure-target-[+module+] maybe-configure-target-[+module+] |
| | 895 | maybe-configure-target-[+module+]: |
| | 896 | |
| | 897 | # There's only one multilib.out. Cleverer subdirs shouldn't need it copied. |
| | 898 | $(TARGET_SUBDIR)/[+module+]/multilib.out: multilib.out |
| | 899 | $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/[+module+] ; \ |
| | 900 | rm -f $(TARGET_SUBDIR)/[+module+]/Makefile || : ; \ |
| | 901 | cp multilib.out $(TARGET_SUBDIR)/[+module+]/multilib.out |
| | 902 | |
| | 903 | configure-target-[+module+]: $(TARGET_SUBDIR)/[+module+]/multilib.out |
| | 904 | @test ! -f $(TARGET_SUBDIR)/[+module+]/Makefile || exit 0; \ |
| | 905 | $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/[+module+] ; \ |
| | 906 | r=`${PWD_COMMAND}`; export r; \ |
| | 907 | s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ |
| | 908 | $(SET_LIB_PATH) \ |
| | 909 | AR="$(AR_FOR_TARGET)"; export AR; \ |
| | 910 | AS="$(AS_FOR_TARGET)"; export AS; \ |
| | 911 | CC="$(CC_FOR_TARGET)"; export CC; \ |
| | 912 | CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \ |
| | 913 | CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ |
| | 914 | CPPFLAGS="$(CFLAGS_FOR_TARGET)"; export CPPFLAGS; \[+ |
| | 915 | IF raw_cxx +] |
| | 916 | CXX_FOR_TARGET="$(RAW_CXX_FOR_TARGET)"; export CXX_FOR_TARGET; \ |
| | 917 | CXX="$(RAW_CXX_FOR_TARGET)"; export CXX; \[+ |
| | 918 | ELSE normal_cxx +] |
| | 919 | CXX="$(CXX_FOR_TARGET)"; export CXX; \[+ |
| | 920 | ENDIF raw_cxx +] |
| | 921 | CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \ |
| | 922 | GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \ |
| | 923 | DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \ |
| | 924 | LD="$(LD_FOR_TARGET)"; export LD; \ |
| | 925 | LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \ |
| | 926 | NM="$(NM_FOR_TARGET)"; export NM; \ |
| | 927 | RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \ |
| | 928 | WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \ |
| | 929 | echo Configuring in $(TARGET_SUBDIR)/[+module+]; \ |
| | 930 | cd "$(TARGET_SUBDIR)/[+module+]" || exit 1; \ |
| | 931 | case $(srcdir) in \ |
| | 932 | /* | [A-Za-z]:[\\/]*) \ |
| | 933 | topdir=$(srcdir) ;; \ |
| | 934 | *) \ |
| | 935 | case "$(TARGET_SUBDIR)" in \ |
| | 936 | .) topdir="../$(srcdir)" ;; \ |
| | 937 | *) topdir="../../$(srcdir)" ;; \ |
| | 938 | esac ;; \ |
| | 939 | esac; \[+ IF stage +] |
| | 940 | if [ "$(srcdir)" = "." ] ; then \ |
| | 941 | if [ "$(TARGET_SUBDIR)" != "." ] ; then \ |
| | 942 | if $(SHELL) $$s/symlink-tree $${topdir}/[+module+] "no-such-file" ; then \ |
| | 943 | if [ -f Makefile ]; then \ |
| | 944 | if $(MAKE) distclean; then \ |
| | 945 | true; \ |
| | 946 | else \ |
| | 947 | exit 1; \ |
| | 948 | fi; \ |
| | 949 | else \ |
| | 950 | true; \ |
| | 951 | fi; \ |
| | 952 | else \ |
| | 953 | exit 1; \ |
| | 954 | fi; \ |
| | 955 | else \ |
| | 956 | true; \ |
| | 957 | fi; \ |
| | 958 | srcdiroption="--srcdir=."; \ |
| | 959 | libsrcdir="."; \ |
| | 960 | else \[+ ENDIF stage +] |
| | 961 | srcdiroption="--srcdir=$${topdir}/[+module+]"; \ |
| | 962 | libsrcdir="$$s/[+module+]"; \[+ IF stage +] |
| | 963 | fi; \[+ ENDIF stage +] |
| | 964 | rm -f no-such-file || : ; \ |
| | 965 | CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \ |
| | 966 | $(TARGET_CONFIGARGS) $${srcdiroption} \ |
| | 967 | --with-target-subdir="$(TARGET_SUBDIR)" \ |
| | 968 | || exit 1 |
| | 969 | |
| | 970 | .PHONY: all-target-[+module+] maybe-all-target-[+module+] |
| | 971 | maybe-all-target-[+module+]: |
| | 972 | all-target-[+module+]: configure-target-[+module+] |
| | 973 | @r=`${PWD_COMMAND}`; export r; \ |
| | 974 | s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ |
| | 975 | $(SET_LIB_PATH) \ |
| | 976 | (cd $(TARGET_SUBDIR)/[+module+] && \ |
| | 977 | $(MAKE) $(TARGET_FLAGS_TO_PASS) [+ |
| | 978 | IF raw_cxx |
| | 979 | +] 'CXX=$$(RAW_CXX_FOR_TARGET)' 'CXX_FOR_TARGET=$$(RAW_CXX_FOR_TARGET)' [+ |
| | 980 | ENDIF raw_cxx |
| | 981 | +] all) |
| | 982 | |
| | 983 | .PHONY: check-target-[+module+] maybe-check-target-[+module+] |
| | 984 | maybe-check-target-[+module+]: |
| | 985 | [+ IF no_check +] |
| | 986 | # Dummy target for uncheckable module. |
| | 987 | check-target-[+module+]: |
| | 988 | [+ ELSE check +] |
| | 989 | check-target-[+module+]: |
| | 990 | @r=`${PWD_COMMAND}`; export r; \ |
| | 991 | s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ |
| | 992 | $(SET_LIB_PATH) \ |
| | 993 | (cd $(TARGET_SUBDIR)/[+module+] && \ |
| | 994 | $(MAKE) $(TARGET_FLAGS_TO_PASS) [+ |
| | 995 | IF raw_cxx |
| | 996 | +] 'CXX=$$(RAW_CXX_FOR_TARGET)' 'CXX_FOR_TARGET=$$(RAW_CXX_FOR_TARGET)' [+ |
| | 997 | ENDIF raw_cxx |
| | 998 | +] check) |
| | 999 | [+ ENDIF no_check +] |
| | 1000 | |
| | 1001 | .PHONY: install-target-[+module+] maybe-install-target-[+module+] |
| | 1002 | maybe-install-target-[+module+]: |
| | 1003 | [+ IF no_install +] |
| | 1004 | # Dummy target for uninstallable. |
| | 1005 | install-target-[+module+]: |
| | 1006 | [+ ELSE install +] |
| | 1007 | install-target-[+module+]: installdirs |
| | 1008 | @r=`${PWD_COMMAND}`; export r; \ |
| | 1009 | s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ |
| | 1010 | $(SET_LIB_PATH) \ |
| | 1011 | (cd $(TARGET_SUBDIR)/[+module+] && \ |
| | 1012 | $(MAKE) $(TARGET_FLAGS_TO_PASS) install) |
| | 1013 | [+ ENDIF no_install +] |
| | 1014 | |
| | 1015 | # Other targets (info, dvi, etc.) |
| | 1016 | [+ FOR recursive_targets +] |
| | 1017 | .PHONY: maybe-[+make_target+]-target-[+module+] [+make_target+]-target-[+module+] |
| | 1018 | maybe-[+make_target+]-target-[+module+]: |
| | 1019 | [+ IF (match-value? = "missing" (get "make_target") ) +] |
| | 1020 | # [+module+] doesn't support [+make_target+]. |
| | 1021 | [+make_target+]-target-[+module+]: |
| | 1022 | [+ ELSE +] |
| | 1023 | [+make_target+]-target-[+module+]: [+ |
| | 1024 | FOR depend +]\ |
| | 1025 | [+depend+]-target-[+module+] [+ |
| | 1026 | ENDFOR depend +] |
| | 1027 | @[ -f $(TARGET_SUBDIR)/[+module+]/Makefile ] || exit 0 ; \ |
| | 1028 | r=`${PWD_COMMAND}`; export r; \ |
| | 1029 | s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ |
| | 1030 | $(SET_LIB_PATH) \ |
| | 1031 | echo "Doing [+make_target+] in $(TARGET_SUBDIR)/[+module+]" ; \ |
| | 1032 | for flag in $(EXTRA_TARGET_FLAGS); do \ |
| | 1033 | eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ |
| | 1034 | done; \ |
| | 1035 | (cd $(TARGET_SUBDIR)/[+module+] && \ |
| | 1036 | $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ |
| | 1037 | "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ |
| | 1038 | "RANLIB=$${RANLIB}" \ |
| | 1039 | "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ |
| | 1040 | [+make_target+]) \ |
| | 1041 | || exit 1 |
| | 1042 | [+ ENDIF +] |
| | 1043 | [+ ENDFOR recursive_targets +] |
| | 1044 | [+ ENDFOR target_modules +] |
| | 1045 | |
| | 1046 | # ---------- |
| | 1047 | # GCC module |
| | 1048 | # ---------- |
| | 1049 | |
| | 1050 | # Unfortunately, while gcc _should_ be a host module, |
| | 1051 | # libgcc is a target module, and gen* programs are |
| | 1052 | # build modules. So GCC is a sort of hybrid. |
| | 1053 | |
| | 1054 | # gcc is the only module which uses GCC_FLAGS_TO_PASS. |
| | 1055 | # Don't use shared host config.cache, as it will confuse later |
| | 1056 | # directories; GCC wants slightly different values for some |
| | 1057 | # precious variables. *sigh* |
| | 1058 | |
| | 1059 | # We must skip configuring if toplevel bootstrap is going. |
| | 1060 | .PHONY: configure-gcc maybe-configure-gcc |
| | 1061 | maybe-configure-gcc: |
| | 1062 | configure-gcc: |
| | 1063 | @test ! -f gcc/Makefile || exit 0; \ |
| | 1064 | [ -f stage_last ] && exit 0; \ |
| | 1065 | [ -d gcc ] || mkdir gcc; \ |
| | 1066 | r=`${PWD_COMMAND}`; export r; \ |
| | 1067 | s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ |
| | 1068 | CC="$(CC)"; export CC; \ |
| | 1069 | CFLAGS="$(CFLAGS)"; export CFLAGS; \ |
| | 1070 | CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ |
| | 1071 | CXX="$(CXX)"; export CXX; \ |
| | 1072 | CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ |
| | 1073 | TOPLEVEL_CONFIGURE_ARGUMENTS="$(TOPLEVEL_CONFIGURE_ARGUMENTS)"; export TOPLEVEL_CONFIGURE_ARGUMENTS; \ |
| | 1074 | AR="$(AR)"; export AR; \ |
| | 1075 | AS="$(AS)"; export AS; \ |
| | 1076 | CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ |
| | 1077 | DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ |
| | 1078 | LD="$(LD)"; export LD; \ |
| | 1079 | NM="$(NM)"; export NM; \ |
| | 1080 | RANLIB="$(RANLIB)"; export RANLIB; \ |
| | 1081 | WINDRES="$(WINDRES)"; export WINDRES; \ |
| | 1082 | OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ |
| | 1083 | OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ |
| | 1084 | echo Configuring in gcc; \ |
| | 1085 | cd gcc || exit 1; \ |
| | 1086 | case $(srcdir) in \ |
| | 1087 | \.) \ |
| | 1088 | srcdiroption="--srcdir=."; \ |
| | 1089 | libsrcdir=".";; \ |
| | 1090 | /* | [A-Za-z]:[\\/]*) \ |
| | 1091 | srcdiroption="--srcdir=$(srcdir)/gcc"; \ |
| | 1092 | libsrcdir="$$s/gcc";; \ |
| | 1093 | *) \ |
| | 1094 | srcdiroption="--srcdir=../$(srcdir)/gcc"; \ |
| | 1095 | libsrcdir="$$s/gcc";; \ |
| | 1096 | esac; \ |
| | 1097 | $(SHELL) $${libsrcdir}/configure \ |
| | 1098 | $(HOST_CONFIGARGS) $${srcdiroption} \ |
| | 1099 | || exit 1 |
| | 1100 | |
| | 1101 | # Don't 'make all' in gcc if it's already been made by 'bootstrap'; that |
| | 1102 | # causes trouble. This wart will be fixed eventually by moving |
| | 1103 | # the bootstrap behavior to this file. |
| | 1104 | .PHONY: all-gcc maybe-all-gcc |
| | 1105 | maybe-all-gcc: |
| | 1106 | all-gcc: configure-gcc |
| | 1107 | r=`${PWD_COMMAND}`; export r; \ |
| | 1108 | s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ |
| | 1109 | if [ -f stage_last ] ; then \ |
| | 1110 | true ; \ |
| | 1111 | elif [ -f gcc/stage_last ] ; then \ |
| | 1112 | $(SET_LIB_PATH) \ |
| | 1113 | (cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) quickstrap); \ |
| | 1114 | else \ |
| | 1115 | $(SET_LIB_PATH) \ |
| | 1116 | (cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) all); \ |
| | 1117 | fi |
| | 1118 | |
| | 1119 | # Building GCC uses some tools for rebuilding "source" files |
| | 1120 | # like texinfo, bison/byacc, etc. So we must depend on those. |
| | 1121 | # |
| | 1122 | # While building GCC, it may be necessary to run various target |
| | 1123 | # programs like the assembler, linker, etc. So we depend on |
| | 1124 | # those too. |
| | 1125 | # |
| | 1126 | # In theory, on an SMP all those dependencies can be resolved |
| | 1127 | # in parallel. |
| | 1128 | # |
| | 1129 | GCC_STRAP_TARGETS = bootstrap bootstrap-lean bootstrap2 bootstrap2-lean bootstrap3 bootstrap3-lean bootstrap4 bootstrap4-lean bubblestrap quickstrap cleanstrap restrap |
| | 1130 | .PHONY: $(GCC_STRAP_TARGETS) |
| | 1131 | $(GCC_STRAP_TARGETS): all-bootstrap configure-gcc |
| | 1132 | @r=`${PWD_COMMAND}`; export r; \ |
| | 1133 | s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ |
| | 1134 | $(SET_LIB_PATH) \ |
| | 1135 | echo "Bootstrapping the compiler"; \ |
| | 1136 | cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) $@ |
| | 1137 | @r=`${PWD_COMMAND}`; export r; \ |
| | 1138 | s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ |
| | 1139 | case "$@" in \ |
| | 1140 | *bootstrap4-lean ) \ |
| | 1141 | msg="Comparing stage3 and stage4 of the compiler"; \ |
| | 1142 | compare=compare3-lean ;; \ |
| | 1143 | *bootstrap4 ) \ |
| | 1144 | msg="Comparing stage3 and stage4 of the compiler"; \ |
| | 1145 | compare=compare3 ;; \ |
| | 1146 | *-lean ) \ |
| | 1147 | msg="Comparing stage2 and stage3 of the compiler"; \ |
| | 1148 | compare=compare-lean ;; \ |
| | 1149 | * ) \ |
| | 1150 | msg="Comparing stage2 and stage3 of the compiler"; \ |
| | 1151 | compare=compare ;; \ |
| | 1152 | esac; \ |
| | 1153 | $(SET_LIB_PATH) \ |
| | 1154 | echo "$$msg"; \ |
| | 1155 | cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) $$compare |
| | 1156 | @r=`${PWD_COMMAND}`; export r; \ |
| | 1157 | s=`cd $(srcdir); ${PWD_COMMAND}` ; export s; \ |
| | 1158 | $(SET_LIB_PATH) \ |
| | 1159 | echo "Building runtime libraries"; \ |
| | 1160 | $(MAKE) $(BASE_FLAGS_TO_PASS) $(RECURSE_FLAGS) all |
| | 1161 | |
| | 1162 | profiledbootstrap: all-bootstrap configure-gcc |
| | 1163 | @r=`${PWD_COMMAND}`; export r; \ |
| | 1164 | s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ |
| | 1165 | $(SET_LIB_PATH) \ |
| | 1166 | echo "Bootstrapping the compiler"; \ |
| | 1167 | cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) stageprofile_build |
| | 1168 | @r=`${PWD_COMMAND}`; export r; \ |
| | 1169 | s=`cd $(srcdir); ${PWD_COMMAND}` ; export s; \ |
| | 1170 | $(SET_LIB_PATH) \ |
| | 1171 | echo "Building runtime libraries and training compiler"; \ |
| | 1172 | $(MAKE) $(BASE_FLAGS_TO_PASS) $(RECURSE_FLAGS) all |
| | 1173 | @r=`${PWD_COMMAND}`; export r; \ |
| | 1174 | s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ |
| | 1175 | $(SET_LIB_PATH) \ |
| | 1176 | echo "Building feedback based compiler"; \ |
| | 1177 | cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) stagefeedback_build |
| | 1178 | |
| | 1179 | .PHONY: cross |
| | 1180 | cross: all-texinfo all-bison all-byacc all-binutils all-gas all-ld |
| | 1181 | @r=`${PWD_COMMAND}`; export r; \ |
| | 1182 | s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ |
| | 1183 | $(SET_LIB_PATH) \ |
| | 1184 | echo "Building the C and C++ compiler"; \ |
| | 1185 | cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) LANGUAGES="c c++" |
| | 1186 | @r=`${PWD_COMMAND}`; export r; \ |
| | 1187 | s=`cd $(srcdir); ${PWD_COMMAND}` ; export s; \ |
| | 1188 | $(SET_LIB_PATH) \ |
| | 1189 | echo "Building runtime libraries"; \ |
| | 1190 | $(MAKE) $(BASE_FLAGS_TO_PASS) $(RECURSE_FLAGS) \ |
| | 1191 | LANGUAGES="c c++" all |
| | 1192 | |
| | 1193 | .PHONY: check-gcc maybe-check-gcc |
| | 1194 | maybe-check-gcc: |
| | 1195 | check-gcc: |
| | 1196 | @if [ -f ./gcc/Makefile ] ; then \ |
| | 1197 | r=`${PWD_COMMAND}`; export r; \ |
| | 1198 | s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ |
| | 1199 | $(SET_LIB_PATH) \ |
| | 1200 | (cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) check); \ |
| | 1201 | else \ |
| | 1202 | true; \ |
| | 1203 | fi |
| | 1204 | |
| | 1205 | .PHONY: check-gcc-c++ |
| | 1206 | check-gcc-c++: |
| | 1207 | @if [ -f ./gcc/Makefile ] ; then \ |
| | 1208 | r=`${PWD_COMMAND}`; export r; \ |
| | 1209 | s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ |
| | 1210 | $(SET_LIB_PATH) \ |
| | 1211 | (cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) check-c++); \ |
| | 1212 | else \ |
| | 1213 | true; \ |
| | 1214 | fi |
| | 1215 | |
| | 1216 | .PHONY: check-c++ |
| | 1217 | check-c++: check-target-libstdc++-v3 check-gcc-c++ |
| | 1218 | |
| | 1219 | .PHONY: install-gcc maybe-install-gcc |
| | 1220 | maybe-install-gcc: |
| | 1221 | install-gcc: |
| | 1222 | @if [ -f ./gcc/Makefile ] ; then \ |
| | 1223 | r=`${PWD_COMMAND}`; export r; \ |
| | 1224 | s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ |
| | 1225 | $(SET_LIB_PATH) \ |
| | 1226 | (cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) install); \ |
| | 1227 | else \ |
| | 1228 | true; \ |
| | 1229 | fi |
| | 1230 | |
| | 1231 | # Install the gcc headers files, but not the fixed include files, |
| | 1232 | # which Cygnus is not allowed to distribute. This rule is very |
| | 1233 | # dependent on the workings of the gcc Makefile.in. |
| | 1234 | .PHONY: gcc-no-fixedincludes |
| | 1235 | gcc-no-fixedincludes: |
| | 1236 | @if [ -f ./gcc/Makefile ]; then \ |
| | 1237 | rm -rf gcc/tmp-include; \ |
| | 1238 | mv gcc/include gcc/tmp-include 2>/dev/null; \ |
| | 1239 | mkdir gcc/include; \ |
| | 1240 | cp $(srcdir)/gcc/gsyslimits.h gcc/include/syslimits.h; \ |
| | 1241 | touch gcc/stmp-fixinc gcc/include/fixed; \ |
| | 1242 | rm -f gcc/stmp-headers gcc/stmp-int-hdrs; \ |
| | 1243 | r=`${PWD_COMMAND}`; export r; \ |
| | 1244 | s=`cd $(srcdir); ${PWD_COMMAND}` ; export s; \ |
| | 1245 | $(SET_LIB_PATH) \ |
| | 1246 | (cd ./gcc && \ |
| | 1247 | $(MAKE) $(GCC_FLAGS_TO_PASS) install); \ |
| | 1248 | rm -rf gcc/include; \ |
| | 1249 | mv gcc/tmp-include gcc/include 2>/dev/null; \ |
| | 1250 | else true; fi |
| | 1251 | |
| | 1252 | # Other targets (dvi, info, etc.) |
| | 1253 | [+ FOR recursive_targets +] |
| | 1254 | .PHONY: maybe-[+make_target+]-gcc [+make_target+]-gcc |
| | 1255 | maybe-[+make_target+]-gcc: |
| | 1256 | [+make_target+]-gcc: [+ |
| | 1257 | FOR depend +]\ |
| | 1258 | [+depend+]-gcc [+ |
| | 1259 | ENDFOR depend +] |
| | 1260 | @[ -f ./gcc/Makefile ] || exit 0; \ |
| | 1261 | r=`${PWD_COMMAND}`; export r; \ |
| | 1262 | s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ |
| | 1263 | $(SET_LIB_PATH) \ |
| | 1264 | for flag in $(EXTRA_GCC_FLAGS); do \ |
| | 1265 | eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ |
| | 1266 | done; \ |
| | 1267 | echo "Doing [+make_target+] in gcc" ; \ |
| | 1268 | (cd gcc && \ |
| | 1269 | $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ |
| | 1270 | "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ |
| | 1271 | "RANLIB=$${RANLIB}" \ |
| | 1272 | "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ |
| | 1273 | [+make_target+]) \ |
| | 1274 | || exit 1 |
| | 1275 | |
| | 1276 | [+ ENDFOR recursive_targets +] |
| | 1277 | |
| | 1278 | # --------------------- |
| | 1279 | # GCC bootstrap support |
| | 1280 | # --------------------- |
| | 1281 | |
| | 1282 | # We name the directories for the various stages "stage1-gcc", |
| | 1283 | # "stage2-gcc","stage3-gcc", etc. |
| | 1284 | # Unfortunately, the 'compare' process will fail (on debugging information) |
| | 1285 | # if any directory names are different! |
| | 1286 | # So in the building rule for each stage, we relocate them before and after. |
| | 1287 | # The current one is 'gcc', while the previous one is 'prev-gcc'. (The |
| | 1288 | # current one must be 'gcc' for now because the scripts in that directory |
| | 1289 | # assume it.) |
| | 1290 | # At the end of the bootstrap, 'stage3-gcc' must be moved to 'gcc' so that |
| | 1291 | # libraries can find it. Ick! |
| | 1292 | |
| | 1293 | # Bugs: This is almost certainly not parallel-make safe. |
| | 1294 | |
| | 1295 | # 'touch' doesn't work right on some platforms. |
| | 1296 | STAMP = echo timestamp > |
| | 1297 | |
| | 1298 | # Only build the C compiler for stage1, because that is the only one that |
| | 1299 | # we can guarantee will build with the native compiler, and also it is the |
| | 1300 | # only thing useful for building stage2. STAGE1_CFLAGS (via CFLAGS), |
| | 1301 | # MAKEINFO and MAKEINFOFLAGS are explicitly passed here to make them |
| | 1302 | # overrideable (for a bootstrap build stage1 also builds gcc.info). |
| | 1303 | |
| | 1304 | STAGE1_CFLAGS=@stage1_cflags@ |
| | 1305 | STAGE1_LANGUAGES=@stage1_languages@ |
| | 1306 | |
| | 1307 | # For stage 1: |
| | 1308 | # * We force-disable intermodule optimizations, even if |
| | 1309 | # --enable-intermodule was passed, since the installed compiler probably |
| | 1310 | # can't handle them. Luckily, autoconf always respects |
| | 1311 | # the last argument when conflicting --enable arguments are passed. |
| | 1312 | # * Likewise, we force-disable coverage flags, since the installed compiler |
| | 1313 | # probably has never heard of them. |
| | 1314 | # * We build only C (and possibly Ada). |
| | 1315 | configure-stage1-gcc: |
| | 1316 | echo configure-stage1-gcc > stage_last ; \ |
| | 1317 | if [ -f stage1-gcc/Makefile ] ; then \ |
| | 1318 | $(STAMP) configure-stage1-gcc ; \ |
| | 1319 | exit 0; \ |
| | 1320 | else \ |
| | 1321 | true ; \ |
| | 1322 | fi ; \ |
| | 1323 | [ -d stage1-gcc ] || mkdir stage1-gcc; \ |
| | 1324 | mv stage1-gcc gcc ; \ |
| | 1325 | r=`${PWD_COMMAND}`; export r; \ |
| | 1326 | s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ |
| | 1327 | CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ |
| | 1328 | TOPLEVEL_CONFIGURE_ARGUMENTS="$(TOPLEVEL_CONFIGURE_ARGUMENTS)"; export TOPLEVEL_CONFIGURE_ARGUMENTS; \ |
| | 1329 | CC="$(CC)"; export CC; \ |
| | 1330 | CFLAGS="$(CFLAGS)"; export CFLAGS; \ |
| | 1331 | CXX="$(CXX)"; export CXX; \ |
| | 1332 | CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ |
| | 1333 | AR="$(AR)"; export AR; \ |
| | 1334 | AS="$(AS)"; export AS; \ |
| | 1335 | CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ |
| | 1336 | DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ |
| | 1337 | LD="$(LD)"; export LD; \ |
| | 1338 | NM="$(NM)"; export NM; \ |
| | 1339 | RANLIB="$(RANLIB)"; export RANLIB; \ |
| | 1340 | WINDRES="$(WINDRES)"; export WINDRES; \ |
| | 1341 | OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ |
| | 1342 | OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ |
| | 1343 | echo Configuring stage 1 in gcc; \ |
| | 1344 | cd gcc || exit 1; \ |
| | 1345 | case $(srcdir) in \ |
| | 1346 | \.) \ |
| | 1347 | srcdiroption="--srcdir=."; \ |
| | 1348 | libsrcdir=".";; \ |
| | 1349 | /* | [A-Za-z]:[\\/]*) \ |
| | 1350 | srcdiroption="--srcdir=$(srcdir)/gcc"; \ |
| | 1351 | libsrcdir="$$s/gcc";; \ |
| | 1352 | *) \ |
| | 1353 | srcdiroption="--srcdir=../$(srcdir)/gcc"; \ |
| | 1354 | libsrcdir="$$s/gcc";; \ |
| | 1355 | esac; \ |
| | 1356 | $(SHELL) $${libsrcdir}/configure \ |
| | 1357 | $(HOST_CONFIGARGS) $${srcdiroption} \ |
| | 1358 | --disable-intermodule --disable-coverage \ |
| | 1359 | --enable-languages="$(STAGE1_LANGUAGES)"; \ |
| | 1360 | cd .. ; \ |
| | 1361 | mv gcc stage1-gcc ; \ |
| | 1362 | $(STAMP) configure-stage1-gcc |
| | 1363 | |
| | 1364 | # Real targets act phony if they depend on phony targets; this hack |
| | 1365 | # prevents gratuitous rebuilding of stage 1. |
| | 1366 | prebootstrap: |
| | 1367 | $(MAKE) all-bootstrap |
| | 1368 | $(STAMP) prebootstrap |
| | 1369 | |
| | 1370 | all-stage1-gcc: configure-stage1-gcc prebootstrap |
| | 1371 | echo all-stage1-gcc > stage_last ; \ |
| | 1372 | r=`${PWD_COMMAND}`; export r; \ |
| | 1373 | s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ |
| | 1374 | mv stage1-gcc gcc ; \ |
| | 1375 | cd gcc && \ |
| | 1376 | $(MAKE) $(GCC_FLAGS_TO_PASS) \ |
| | 1377 | CFLAGS="$(STAGE1_CFLAGS)" \ |
| | 1378 | || exit 1 ; \ |
| | 1379 | cd .. ; \ |
| | 1380 | mv gcc stage1-gcc ; \ |
| | 1381 | $(STAMP) all-stage1-gcc |
| | 1382 | |
| | 1383 | # TODO: Deal with STAGE_PREFIX (which is only for ada, incidentally) |
| | 1384 | # Possibly pass --enable-werror-always (depending on --enable-werror); |
| | 1385 | # that's what @stage2_werror_flag@ is for |
| | 1386 | configure-stage2-gcc: all-stage1-gcc |
| | 1387 | echo configure-stage2-gcc > stage_last ; \ |
| | 1388 | if [ -f stage2-gcc/Makefile ] ; then \ |
| | 1389 | $(STAMP) configure-stage2-gcc ; \ |
| | 1390 | exit 0; \ |
| | 1391 | else \ |
| | 1392 | true ; \ |
| | 1393 | fi ; \ |
| | 1394 | [ -d stage2-gcc ] || mkdir stage2-gcc; \ |
| | 1395 | mv stage2-gcc gcc ; \ |
| | 1396 | mv stage1-gcc prev-gcc ; \ |
| | 1397 | r=`${PWD_COMMAND}`; export r; \ |
| | 1398 | s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ |
| | 1399 | CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ |
| | 1400 | TOPLEVEL_CONFIGURE_ARGUMENTS="$(TOPLEVEL_CONFIGURE_ARGUMENTS)"; export TOPLEVEL_CONFIGURE_ARGUMENTS; \ |
| | 1401 | CFLAGS="$(CFLAGS)"; export CFLAGS; \ |
| | 1402 | CXX="$(CXX)"; export CXX; \ |
| | 1403 | CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ |
| | 1404 | AR="$(AR)"; export AR; \ |
| | 1405 | AS="$(AS)"; export AS; \ |
| | 1406 | DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ |
| | 1407 | LD="$(LD)"; export LD; \ |
| | 1408 | NM="$(NM)"; export NM; \ |
| | 1409 | RANLIB="$(RANLIB)"; export RANLIB; \ |
| | 1410 | WINDRES="$(WINDRES)"; export WINDRES; \ |
| | 1411 | OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ |
| | 1412 | OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ |
| | 1413 | CC="$(STAGE_CC_WRAPPER) $$r/prev-gcc/xgcc$(exeext) -B$$r/prev-gcc/ -B$(build_tooldir)/bin/"; export CC; \ |
| | 1414 | CC_FOR_BUILD="$(STAGE_CC_WRAPPER) $$r/prev-gcc/xgcc$(exeext) -B$$r/prev-gcc/ -B$(build_tooldir)/bin/"; export CC_FOR_BUILD; \ |
| | 1415 | echo Configuring stage 2 in gcc; \ |
| | 1416 | cd gcc || exit 1; \ |
| | 1417 | case $(srcdir) in \ |
| | 1418 | \.) \ |
| | 1419 | srcdiroption="--srcdir=."; \ |
| | 1420 | libsrcdir=".";; \ |
| | 1421 | /* | [A-Za-z]:[\\/]*) \ |
| | 1422 | srcdiroption="--srcdir=$(srcdir)/gcc"; \ |
| | 1423 | libsrcdir="$$s/gcc";; \ |
| | 1424 | *) \ |
| | 1425 | srcdiroption="--srcdir=../$(srcdir)/gcc"; \ |
| | 1426 | libsrcdir="$$s/gcc";; \ |
| | 1427 | esac; \ |
| | 1428 | $(SHELL) $${libsrcdir}/configure \ |
| | 1429 | $(HOST_CONFIGARGS) $${srcdiroption} @stage2_werror_flag@ ; \ |
| | 1430 | cd .. ; \ |
| | 1431 | mv gcc stage2-gcc ; \ |
| | 1432 | mv prev-gcc stage1-gcc ; \ |
| | 1433 | $(STAMP) configure-stage2-gcc |
| | 1434 | |
| | 1435 | # Flags to pass to stage2 and later makes. |
| | 1436 | BOOT_CFLAGS= -g -O2 |
| | 1437 | POSTSTAGE1_FLAGS_TO_PASS = \ |
| | 1438 | CFLAGS="$(BOOT_CFLAGS)" \ |
| | 1439 | ADAC="\$$(CC)" |
| | 1440 | |
| | 1441 | all-stage2-gcc: all-stage1-gcc configure-stage2-gcc |
| | 1442 | echo all-stage2-gcc > stage_last ; \ |
| | 1443 | r=`${PWD_COMMAND}`; export r; \ |
| | 1444 | s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ |
| | 1445 | mv stage2-gcc gcc ; \ |
| | 1446 | mv stage1-gcc prev-gcc ; \ |
| | 1447 | cd gcc && \ |
| | 1448 | $(MAKE) $(GCC_FLAGS_TO_PASS) \ |
| | 1449 | CC="$(STAGE_CC_WRAPPER) $$r/prev-gcc/xgcc$(exeext) -B$$r/prev-gcc/ -B$(build_tooldir)/bin/" \ |
| | 1450 | CC_FOR_BUILD="$(STAGE_CC_WRAPPER) $$r/prev-gcc/xgcc$(exeext) -B$$r/prev-gcc/ -B$(build_tooldir)/bin/" \ |
| | 1451 | STAGE_PREFIX=$$r/prev-gcc/ \ |
| | 1452 | $(POSTSTAGE1_FLAGS_TO_PASS) || exit 1 ; \ |
| | 1453 | cd .. ; \ |
| | 1454 | mv prev-gcc stage1-gcc ; \ |
| | 1455 | mv gcc stage2-gcc ; \ |
| | 1456 | $(STAMP) all-stage2-gcc |
| | 1457 | |
| | 1458 | configure-stage3-gcc: all-stage2-gcc |
| | 1459 | echo configure-stage3-gcc > stage_last ; \ |
| | 1460 | if [ -f stage3-gcc/Makefile ] ; then \ |
| | 1461 | $(STAMP) configure-stage3-gcc ; \ |
| | 1462 | exit 0; \ |
| | 1463 | else \ |
| | 1464 | true ; \ |
| | 1465 | fi ; \ |
| | 1466 | [ -d stage3-gcc ] || mkdir stage3-gcc; \ |
| | 1467 | mv stage3-gcc gcc ; \ |
| | 1468 | mv stage2-gcc prev-gcc ; \ |
| | 1469 | r=`${PWD_COMMAND}`; export r; \ |
| | 1470 | s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ |
| | 1471 | CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ |
| | 1472 | TOPLEVEL_CONFIGURE_ARGUMENTS="$(TOPLEVEL_CONFIGURE_ARGUMENTS)"; export TOPLEVEL_CONFIGURE_ARGUMENTS; \ |
| | 1473 | CFLAGS="$(CFLAGS)"; export CFLAGS; \ |
| | 1474 | CXX="$(CXX)"; export CXX; \ |
| | 1475 | CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ |
| | 1476 | AR="$(AR)"; export AR; \ |
| | 1477 | AS="$(AS)"; export AS; \ |
| | 1478 | DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ |
| | 1479 | LD="$(LD)"; export LD; \ |
| | 1480 | NM="$(NM)"; export NM; \ |
| | 1481 | RANLIB="$(RANLIB)"; export RANLIB; \ |
| | 1482 | WINDRES="$(WINDRES)"; export WINDRES; \ |
| | 1483 | OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ |
| | 1484 | OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ |
| | 1485 | CC="$(STAGE_CC_WRAPPER) $$r/prev-gcc/xgcc$(exeext) -B$$r/prev-gcc/ -B$(build_tooldir)/bin/"; export CC; \ |
| | 1486 | CC_FOR_BUILD="$(STAGE_CC_WRAPPER) $$r/prev-gcc/xgcc$(exeext) -B$$r/prev-gcc/ -B$(build_tooldir)/bin/"; export CC_FOR_BUILD; \ |
| | 1487 | echo Configuring stage 3 in gcc; \ |
| | 1488 | cd gcc || exit 1; \ |
| | 1489 | case $(srcdir) in \ |
| | 1490 | \.) \ |
| | 1491 | srcdiroption="--srcdir=."; \ |
| | 1492 | libsrcdir=".";; \ |
| | 1493 | /* | [A-Za-z]:[\\/]*) \ |
| | 1494 | srcdiroption="--srcdir=$(srcdir)/gcc"; \ |
| | 1495 | libsrcdir="$$s/gcc";; \ |
| | 1496 | *) \ |
| | 1497 | srcdiroption="--srcdir=../$(srcdir)/gcc"; \ |
| | 1498 | libsrcdir="$$s/gcc";; \ |
| | 1499 | esac; \ |
| | 1500 | $(SHELL) $${libsrcdir}/configure \ |
| | 1501 | $(HOST_CONFIGARGS) $${srcdiroption} @stage2_werror_flag@ ; \ |
| | 1502 | cd .. ; \ |
| | 1503 | mv gcc stage3-gcc ; \ |
| | 1504 | mv prev-gcc stage2-gcc ; \ |
| | 1505 | $(STAMP) configure-stage3-gcc |
| | 1506 | |
| | 1507 | all-stage3-gcc: all-stage2-gcc configure-stage3-gcc |
| | 1508 | echo all-stage3-gcc > stage_last ; \ |
| | 1509 | r=`${PWD_COMMAND}`; export r; \ |
| | 1510 | s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ |
| | 1511 | mv stage2-gcc prev-gcc ; \ |
| | 1512 | mv stage3-gcc gcc ; \ |
| | 1513 | cd gcc && \ |
| | 1514 | $(MAKE) $(GCC_FLAGS_TO_PASS) \ |
| | 1515 | CC="$(STAGE_CC_WRAPPER) $$r/prev-gcc/xgcc$(exeext) -B$$r/prev-gcc/ -B$(build_tooldir)/bin/" \ |
| | 1516 | CC_FOR_BUILD="$(STAGE_CC_WRAPPER) $$r/prev-gcc/xgcc$(exeext) -B$$r/prev-gcc/ -B$(build_tooldir)/bin/" \ |
| | 1517 | STAGE_PREFIX=$$r/prev-gcc/ \ |
| | 1518 | $(POSTSTAGE1_FLAGS_TO_PASS) || exit 1 ; \ |
| | 1519 | cd .. ; \ |
| | 1520 | mv prev-gcc stage2-gcc ; \ |
| | 1521 | mv gcc stage3-gcc ; \ |
| | 1522 | $(STAMP) all-stage3-gcc |
| | 1523 | |
| | 1524 | # We only want to compare .o files, so set this! |
| | 1525 | objext = .o |
| | 1526 | |
| | 1527 | compare: all-stage3-gcc |
| | 1528 | r=`${PWD_COMMAND}`; export r; \ |
| | 1529 | s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ |
| | 1530 | rm -f .bad_compare ; \ |
| | 1531 | cd stage3-gcc; \ |
| | 1532 | files=`find . -name "*$(objext)" -print` ; \ |
| | 1533 | cd .. ; \ |
| | 1534 | for file in $${files} ; do \ |
| | 1535 | cmp --ignore-initial=16 $$r/stage2-gcc/$$file $$r/stage3-gcc/$$file \ |
| | 1536 | > /dev/null 2>&1; \ |
| | 1537 | test $$? -eq 1 && echo $$file differs >> .bad_compare || true; \ |
| | 1538 | done ; \ |
| | 1539 | if [ -f .bad_compare ]; then \ |
| | 1540 | echo "Bootstrap comparison failure!"; \ |
| | 1541 | cat .bad_compare; \ |
| | 1542 | exit 1; \ |
| | 1543 | else \ |
| | 1544 | true; \ |
| | 1545 | fi ; \ |
| | 1546 | $(STAMP) compare |
| | 1547 | |
| | 1548 | .PHONY: new-bootstrap |
| | 1549 | # This target exists so that everything can be made in one pass. |
| | 1550 | # 'all-gcc' has to avoid stomping on the bootstrap-generated gcc for |
| | 1551 | # this to work. |
| | 1552 | new-bootstrap: compare |
| | 1553 | mv stage3-gcc gcc ; \ |
| | 1554 | $(MAKE) all ; \ |
| | 1555 | mv gcc stage3-gcc |
| | 1556 | |
| | 1557 | # -------------------------------------- |
| | 1558 | # Dependencies between different modules |
| | 1559 | # -------------------------------------- |
| | 1560 | |
| | 1561 | # There are two types of dependencies here: 'hard' dependencies, where one |
| | 1562 | # module simply won't build without the other; and 'soft' dependencies, where |
| | 1563 | # if the depended-on module is missing, the depending module will do without |
| | 1564 | # or find a substitute somewhere (perhaps installed). Soft dependencies |
| | 1565 | # are specified by depending on a 'maybe-' target. If you're not sure, |
| | 1566 | # it's safer to use a soft dependency. |
| | 1567 | |
| | 1568 | # Host modules specific to gcc. |
| | 1569 | # GCC needs to identify certain tools. |
| | 1570 | # GCC also needs the information exported by the intl configure script. |
| | 1571 | configure-gcc: maybe-configure-intl maybe-configure-binutils maybe-configure-gas maybe-configure-ld maybe-configure-bison maybe-configure-flex |
| | 1572 | all-gcc: maybe-all-libiberty maybe-all-intl maybe-all-bison maybe-all-byacc maybe-all-binutils maybe-all-gas maybe-all-ld maybe-all-zlib |
| | 1573 | # This is a slightly kludgy method of getting dependencies on |
| | 1574 | # all-build-libiberty correct; it would be better to build it every time. |
| | 1575 | all-gcc: maybe-all-build-libiberty |
| | 1576 | all-bootstrap: maybe-all-libiberty maybe-all-intl maybe-all-texinfo maybe-all-bison maybe-all-byacc maybe-all-binutils maybe-all-gas maybe-all-ld maybe-all-zlib |
| | 1577 | |
| | 1578 | # Host modules specific to gdb. |
| | 1579 | # GDB needs to know that the simulator is being built. |
| | 1580 | configure-gdb: maybe-configure-itcl maybe-configure-tcl maybe-configure-tk maybe-configure-sim |
| | 1581 | GDB_TK = @GDB_TK@ |
| | 1582 | all-gdb: maybe-all-libiberty maybe-all-opcodes maybe-all-bfd maybe-all-mmalloc maybe-all-readline maybe-all-bison maybe-all-byacc maybe-all-sim $(gdbnlmrequirements) $(GDB_TK) |
| | 1583 | install-gdb: maybe-install-tcl maybe-install-tk maybe-install-itcl maybe-install-tix maybe-install-libgui |
| | 1584 | configure-libgui: maybe-configure-tcl maybe-configure-tk |
| | 1585 | all-libgui: maybe-all-tcl maybe-all-tk maybe-all-itcl |
| | 1586 | |
| | 1587 | # Host modules specific to binutils. |
| | 1588 | configure-bfd: configure-libiberty |
| | 1589 | all-bfd: maybe-all-libiberty maybe-all-intl |
| | 1590 | all-binutils: maybe-all-libiberty maybe-all-opcodes maybe-all-bfd maybe-all-flex maybe-all-bison maybe-all-byacc maybe-all-intl |
| | 1591 | # We put install-opcodes before install-binutils because the installed |
| | 1592 | # binutils might be on PATH, and they might need the shared opcodes |
| | 1593 | # library. |
| | 1594 | install-binutils: maybe-install-opcodes |
| | 1595 | # libopcodes depends on libbfd |
| | 1596 | install-opcodes: maybe-install-bfd |
| | 1597 | all-gas: maybe-all-libiberty maybe-all-opcodes maybe-all-bfd maybe-all-intl |
| | 1598 | all-gprof: maybe-all-libiberty maybe-all-bfd maybe-all-opcodes maybe-all-intl |
| | 1599 | all-ld: maybe-all-libiberty maybe-all-bfd maybe-all-opcodes maybe-all-bison maybe-all-byacc maybe-all-flex maybe-all-intl |
| | 1600 | all-opcodes: maybe-all-bfd maybe-all-libiberty |
| | 1601 | |
| | 1602 | # Other host modules in the 'src' repository. |
| | 1603 | all-dejagnu: maybe-all-tcl maybe-all-expect maybe-all-tk |
| | 1604 | configure-expect: maybe-configure-tcl maybe-configure-tk |
| | 1605 | all-expect: maybe-all-tcl maybe-all-tk |
| | 1606 | configure-itcl: maybe-configure-tcl maybe-configure-tk |
| | 1607 | all-itcl: maybe-all-tcl maybe-all-tk |
| | 1608 | # We put install-tcl before install-itcl because itcl wants to run a |
| | 1609 | # program on installation which uses the Tcl libraries. |
| | 1610 | install-itcl: maybe-install-tcl |
| | 1611 | all-sid: maybe-all-libiberty maybe-all-bfd maybe-all-opcodes maybe-all-tcl maybe-all-tk |
| | 1612 | install-sid: maybe-install-tcl maybe-install-tk |
| | 1613 | all-sim: maybe-all-libiberty maybe-all-bfd maybe-all-opcodes maybe-all-readline maybe-configure-gdb |
| | 1614 | configure-tk: maybe-configure-tcl |
| | 1615 | all-tk: maybe-all-tcl |
| | 1616 | configure-tix: maybe-configure-tcl maybe-configure-tk |
| | 1617 | all-tix: maybe-all-tcl maybe-all-tk |
| | 1618 | all-texinfo: maybe-all-libiberty |
| | 1619 | |
| | 1620 | # Other host modules. Warning, these are not well tested. |
| | 1621 | all-autoconf: maybe-all-m4 maybe-all-texinfo |
| | 1622 | all-automake: maybe-all-m4 maybe-all-texinfo |
| | 1623 | all-bison: maybe-all-texinfo |
| | 1624 | all-diff: maybe-all-libiberty |
| | 1625 | all-fastjar: maybe-all-zlib maybe-all-libiberty |
| | 1626 | all-fileutils: maybe-all-libiberty |
| | 1627 | all-flex: maybe-all-libiberty maybe-all-bison maybe-all-byacc |
| | 1628 | all-gzip: maybe-all-libiberty |
| | 1629 | all-hello: maybe-all-libiberty |
| | 1630 | all-m4: maybe-all-libiberty maybe-all-texinfo |
| | 1631 | all-make: maybe-all-libiberty maybe-all-intl |
| | 1632 | all-patch: maybe-all-libiberty |
| | 1633 | all-prms: maybe-all-libiberty |
| | 1634 | all-recode: maybe-all-libiberty |
| | 1635 | all-sed: maybe-all-libiberty |
| | 1636 | all-send-pr: maybe-all-prms |
| | 1637 | all-tar: maybe-all-libiberty |
| | 1638 | all-uudecode: maybe-all-libiberty |
| | 1639 | |
| | 1640 | ALL_GCC = maybe-all-gcc |
| | 1641 | ALL_GCC_C = $(ALL_GCC) maybe-all-target-newlib maybe-all-target-libgloss |
| | 1642 | ALL_GCC_CXX = $(ALL_GCC_C) maybe-all-target-libstdc++-v3 |
| | 1643 | |
| | 1644 | # Target modules specific to gcc. |
| | 1645 | configure-target-boehm-gc: $(ALL_GCC_C) maybe-configure-target-qthreads |
| | 1646 | configure-target-fastjar: maybe-configure-target-zlib |
| | 1647 | all-target-fastjar: maybe-all-target-zlib maybe-all-target-libiberty |
| | 1648 | configure-target-libada: $(ALL_GCC_C) |
| | 1649 | configure-target-libf2c: $(ALL_GCC_C) |
| | 1650 | all-target-libf2c: maybe-all-target-libiberty |
| | 1651 | configure-target-libffi: $(ALL_GCC_C) |
| | 1652 | configure-target-libjava: $(ALL_GCC_C) maybe-configure-target-zlib maybe-configure-target-boehm-gc maybe-configure-target-qthreads maybe-configure-target-libffi |
| | 1653 | all-target-libjava: maybe-all-fastjar maybe-all-target-zlib maybe-all-target-boehm-gc maybe-all-target-qthreads maybe-all-target-libffi |
| | 1654 | configure-target-libobjc: $(ALL_GCC_C) |
| | 1655 | all-target-libobjc: maybe-all-target-libiberty |
| | 1656 | configure-target-libstdc++-v3: $(ALL_GCC_C) |
| | 1657 | all-target-libstdc++-v3: maybe-all-target-libiberty |
| | 1658 | configure-target-zlib: $(ALL_GCC_C) |
| | 1659 | |
| | 1660 | # Target modules in the 'src' repository. |
| | 1661 | configure-target-examples: $(ALL_GCC_C) |
| | 1662 | configure-target-libgloss: $(ALL_GCC) |
| | 1663 | all-target-libgloss: maybe-configure-target-newlib |
| | 1664 | configure-target-libiberty: $(ALL_GCC) |
| | 1665 | configure-target-libtermcap: $(ALL_GCC_C) |
| | 1666 | configure-target-newlib: $(ALL_GCC) |
| | 1667 | configure-target-rda: $(ALL_GCC_C) |
| | 1668 | configure-target-winsup: $(ALL_GCC_C) |
| | 1669 | all-target-winsup: maybe-all-target-libiberty maybe-all-target-libtermcap |
| | 1670 | |
| | 1671 | # Other target modules. Warning, these are not well tested. |
| | 1672 | configure-target-gperf: $(ALL_GCC_CXX) |
| | 1673 | all-target-gperf: maybe-all-target-libiberty maybe-all-target-libstdc++-v3 |
| | 1674 | configure-target-qthreads: $(ALL_GCC_C) |
| | 1675 | |
| | 1676 | # Dependencies of maybe-foo on foo. These are used because, for example, |
| | 1677 | # all-gcc only depends on all-gas if gas is present and being configured. |
| | 1678 | @maybe_dependencies@ |
| | 1679 | |
| | 1680 | # Serialization dependencies. Host configures don't work well in parallel to |
| | 1681 | # each other, due to contention over config.cache. Target configures and |
| | 1682 | # build configures are similar. |
| | 1683 | @serialization_dependencies@ |
| | 1684 | |
| | 1685 | # -------------------------------- |
| | 1686 | # Regenerating top level configury |
| | 1687 | # -------------------------------- |
| | 1688 | |
| | 1689 | # Multilib.out tells target dirs what multilibs they should build. |
| | 1690 | # There is really only one copy. We use the 'timestamp' method to |
| | 1691 | # work around various timestamp bugs on some systems. |
| | 1692 | # We use move-if-change so that it's only considered updated when it |
| | 1693 | # actually changes, because it has to depend on a phony target. |
| | 1694 | multilib.out: maybe-all-gcc |
| | 1695 | @r=`${PWD_COMMAND}`; export r; \ |
| | 1696 | echo "Checking multilib configuration..."; \ |
| | 1697 | $(CC_FOR_TARGET) --print-multi-lib > multilib.tmp 2> /dev/null ; \ |
| | 1698 | $(SHELL) $(srcdir)/move-if-change multilib.tmp multilib.out ; \ |
| | 1699 | |
| | 1700 | # Rebuilding Makefile.in, using autogen. |
| | 1701 | AUTOGEN = autogen |
| | 1702 | $(srcdir)/Makefile.in: @MAINT@ $(srcdir)/Makefile.tpl $(srcdir)/Makefile.def |
| | 1703 | cd $(srcdir) && $(AUTOGEN) Makefile.def |
| | 1704 | |
| | 1705 | # Rebuilding Makefile. |
| | 1706 | Makefile: $(srcdir)/Makefile.in config.status |
| | 1707 | CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status |
| | 1708 | |
| | 1709 | config.status: configure $(gcc_version_trigger) |
| | 1710 | CONFIG_SHELL="$(SHELL)" $(SHELL) ./config.status --recheck |
| | 1711 | |
| | 1712 | # Rebuilding configure. |
| | 1713 | AUTOCONF = autoconf |
| | 1714 | $(srcdir)/configure: @MAINT@ $(srcdir)/configure.in $(srcdir)/config/acx.m4 |
| | 1715 | cd $(srcdir) && $(AUTOCONF) |
| | 1716 | |
| | 1717 | # ------------------------------ |
| | 1718 | # Special directives to GNU Make |
| | 1719 | # ------------------------------ |
| | 1720 | |
| | 1721 | # Don't pass command-line variables to submakes. |
| | 1722 | .NOEXPORT: |
| | 1723 | MAKEOVERRIDES= |
| | 1724 | |
| | 1725 | # end of Makefile.in |
projects / deliverable / binutils-gdb.git / blame_incremental