| 1 | config ARM |
| 2 | bool |
| 3 | default y |
| 4 | select ARCH_BINFMT_ELF_RANDOMIZE_PIE |
| 5 | select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE |
| 6 | select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST |
| 7 | select ARCH_HAVE_CUSTOM_GPIO_H |
| 8 | select ARCH_MIGHT_HAVE_PC_PARPORT |
| 9 | select ARCH_USE_CMPXCHG_LOCKREF |
| 10 | select ARCH_WANT_IPC_PARSE_VERSION |
| 11 | select BUILDTIME_EXTABLE_SORT if MMU |
| 12 | select CLONE_BACKWARDS |
| 13 | select CPU_PM if (SUSPEND || CPU_IDLE) |
| 14 | select DCACHE_WORD_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && !CPU_BIG_ENDIAN && MMU |
| 15 | select GENERIC_ATOMIC64 if (CPU_V7M || CPU_V6 || !CPU_32v6K || !AEABI) |
| 16 | select GENERIC_CLOCKEVENTS_BROADCAST if SMP |
| 17 | select GENERIC_IDLE_POLL_SETUP |
| 18 | select GENERIC_IRQ_PROBE |
| 19 | select GENERIC_IRQ_SHOW |
| 20 | select GENERIC_PCI_IOMAP |
| 21 | select GENERIC_SCHED_CLOCK |
| 22 | select GENERIC_SMP_IDLE_THREAD |
| 23 | select GENERIC_STRNCPY_FROM_USER |
| 24 | select GENERIC_STRNLEN_USER |
| 25 | select HARDIRQS_SW_RESEND |
| 26 | select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL |
| 27 | select HAVE_ARCH_KGDB |
| 28 | select HAVE_ARCH_SECCOMP_FILTER if (AEABI && !OABI_COMPAT) |
| 29 | select HAVE_ARCH_TRACEHOOK |
| 30 | select HAVE_BPF_JIT |
| 31 | select HAVE_CONTEXT_TRACKING |
| 32 | select HAVE_C_RECORDMCOUNT |
| 33 | select HAVE_DEBUG_KMEMLEAK |
| 34 | select HAVE_DMA_API_DEBUG |
| 35 | select HAVE_DMA_ATTRS |
| 36 | select HAVE_DMA_CONTIGUOUS if MMU |
| 37 | select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL) |
| 38 | select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL) |
| 39 | select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL) |
| 40 | select HAVE_FUNCTION_TRACER if (!XIP_KERNEL) |
| 41 | select HAVE_GENERIC_DMA_COHERENT |
| 42 | select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7)) |
| 43 | select HAVE_IDE if PCI || ISA || PCMCIA |
| 44 | select HAVE_IRQ_TIME_ACCOUNTING |
| 45 | select HAVE_KERNEL_GZIP |
| 46 | select HAVE_KERNEL_LZ4 |
| 47 | select HAVE_KERNEL_LZMA |
| 48 | select HAVE_KERNEL_LZO |
| 49 | select HAVE_KERNEL_XZ |
| 50 | select HAVE_KPROBES if !XIP_KERNEL |
| 51 | select HAVE_KRETPROBES if (HAVE_KPROBES) |
| 52 | select HAVE_MEMBLOCK |
| 53 | select HAVE_MOD_ARCH_SPECIFIC if ARM_UNWIND |
| 54 | select HAVE_OPROFILE if (HAVE_PERF_EVENTS) |
| 55 | select HAVE_PERF_EVENTS |
| 56 | select HAVE_PERF_REGS |
| 57 | select HAVE_PERF_USER_STACK_DUMP |
| 58 | select HAVE_REGS_AND_STACK_ACCESS_API |
| 59 | select HAVE_SYSCALL_TRACEPOINTS |
| 60 | select HAVE_UID16 |
| 61 | select HAVE_VIRT_CPU_ACCOUNTING_GEN |
| 62 | select IRQ_FORCED_THREADING |
| 63 | select KTIME_SCALAR |
| 64 | select MODULES_USE_ELF_REL |
| 65 | select OLD_SIGACTION |
| 66 | select OLD_SIGSUSPEND3 |
| 67 | select PERF_USE_VMALLOC |
| 68 | select RTC_LIB |
| 69 | select SYS_SUPPORTS_APM_EMULATION |
| 70 | # Above selects are sorted alphabetically; please add new ones |
| 71 | # according to that. Thanks. |
| 72 | help |
| 73 | The ARM series is a line of low-power-consumption RISC chip designs |
| 74 | licensed by ARM Ltd and targeted at embedded applications and |
| 75 | handhelds such as the Compaq IPAQ. ARM-based PCs are no longer |
| 76 | manufactured, but legacy ARM-based PC hardware remains popular in |
| 77 | Europe. There is an ARM Linux project with a web page at |
| 78 | <http://www.arm.linux.org.uk/>. |
| 79 | |
| 80 | config ARM_HAS_SG_CHAIN |
| 81 | bool |
| 82 | |
| 83 | config NEED_SG_DMA_LENGTH |
| 84 | bool |
| 85 | |
| 86 | config ARM_DMA_USE_IOMMU |
| 87 | bool |
| 88 | select ARM_HAS_SG_CHAIN |
| 89 | select NEED_SG_DMA_LENGTH |
| 90 | |
| 91 | if ARM_DMA_USE_IOMMU |
| 92 | |
| 93 | config ARM_DMA_IOMMU_ALIGNMENT |
| 94 | int "Maximum PAGE_SIZE order of alignment for DMA IOMMU buffers" |
| 95 | range 4 9 |
| 96 | default 8 |
| 97 | help |
| 98 | DMA mapping framework by default aligns all buffers to the smallest |
| 99 | PAGE_SIZE order which is greater than or equal to the requested buffer |
| 100 | size. This works well for buffers up to a few hundreds kilobytes, but |
| 101 | for larger buffers it just a waste of address space. Drivers which has |
| 102 | relatively small addressing window (like 64Mib) might run out of |
| 103 | virtual space with just a few allocations. |
| 104 | |
| 105 | With this parameter you can specify the maximum PAGE_SIZE order for |
| 106 | DMA IOMMU buffers. Larger buffers will be aligned only to this |
| 107 | specified order. The order is expressed as a power of two multiplied |
| 108 | by the PAGE_SIZE. |
| 109 | |
| 110 | endif |
| 111 | |
| 112 | config HAVE_PWM |
| 113 | bool |
| 114 | |
| 115 | config MIGHT_HAVE_PCI |
| 116 | bool |
| 117 | |
| 118 | config SYS_SUPPORTS_APM_EMULATION |
| 119 | bool |
| 120 | |
| 121 | config HAVE_TCM |
| 122 | bool |
| 123 | select GENERIC_ALLOCATOR |
| 124 | |
| 125 | config HAVE_PROC_CPU |
| 126 | bool |
| 127 | |
| 128 | config NO_IOPORT |
| 129 | bool |
| 130 | |
| 131 | config EISA |
| 132 | bool |
| 133 | ---help--- |
| 134 | The Extended Industry Standard Architecture (EISA) bus was |
| 135 | developed as an open alternative to the IBM MicroChannel bus. |
| 136 | |
| 137 | The EISA bus provided some of the features of the IBM MicroChannel |
| 138 | bus while maintaining backward compatibility with cards made for |
| 139 | the older ISA bus. The EISA bus saw limited use between 1988 and |
| 140 | 1995 when it was made obsolete by the PCI bus. |
| 141 | |
| 142 | Say Y here if you are building a kernel for an EISA-based machine. |
| 143 | |
| 144 | Otherwise, say N. |
| 145 | |
| 146 | config SBUS |
| 147 | bool |
| 148 | |
| 149 | config STACKTRACE_SUPPORT |
| 150 | bool |
| 151 | default y |
| 152 | |
| 153 | config HAVE_LATENCYTOP_SUPPORT |
| 154 | bool |
| 155 | depends on !SMP |
| 156 | default y |
| 157 | |
| 158 | config LOCKDEP_SUPPORT |
| 159 | bool |
| 160 | default y |
| 161 | |
| 162 | config TRACE_IRQFLAGS_SUPPORT |
| 163 | bool |
| 164 | default y |
| 165 | |
| 166 | config RWSEM_GENERIC_SPINLOCK |
| 167 | bool |
| 168 | default y |
| 169 | |
| 170 | config RWSEM_XCHGADD_ALGORITHM |
| 171 | bool |
| 172 | |
| 173 | config ARCH_HAS_ILOG2_U32 |
| 174 | bool |
| 175 | |
| 176 | config ARCH_HAS_ILOG2_U64 |
| 177 | bool |
| 178 | |
| 179 | config ARCH_HAS_CPUFREQ |
| 180 | bool |
| 181 | help |
| 182 | Internal node to signify that the ARCH has CPUFREQ support |
| 183 | and that the relevant menu configurations are displayed for |
| 184 | it. |
| 185 | |
| 186 | config ARCH_HAS_BANDGAP |
| 187 | bool |
| 188 | |
| 189 | config GENERIC_HWEIGHT |
| 190 | bool |
| 191 | default y |
| 192 | |
| 193 | config GENERIC_CALIBRATE_DELAY |
| 194 | bool |
| 195 | default y |
| 196 | |
| 197 | config ARCH_MAY_HAVE_PC_FDC |
| 198 | bool |
| 199 | |
| 200 | config ZONE_DMA |
| 201 | bool |
| 202 | |
| 203 | config NEED_DMA_MAP_STATE |
| 204 | def_bool y |
| 205 | |
| 206 | config ARCH_HAS_DMA_SET_COHERENT_MASK |
| 207 | bool |
| 208 | |
| 209 | config GENERIC_ISA_DMA |
| 210 | bool |
| 211 | |
| 212 | config FIQ |
| 213 | bool |
| 214 | |
| 215 | config NEED_RET_TO_USER |
| 216 | bool |
| 217 | |
| 218 | config ARCH_MTD_XIP |
| 219 | bool |
| 220 | |
| 221 | config VECTORS_BASE |
| 222 | hex |
| 223 | default 0xffff0000 if MMU || CPU_HIGH_VECTOR |
| 224 | default DRAM_BASE if REMAP_VECTORS_TO_RAM |
| 225 | default 0x00000000 |
| 226 | help |
| 227 | The base address of exception vectors. This must be two pages |
| 228 | in size. |
| 229 | |
| 230 | config ARM_PATCH_PHYS_VIRT |
| 231 | bool "Patch physical to virtual translations at runtime" if EMBEDDED |
| 232 | default y |
| 233 | depends on !XIP_KERNEL && MMU |
| 234 | depends on !ARCH_REALVIEW || !SPARSEMEM |
| 235 | help |
| 236 | Patch phys-to-virt and virt-to-phys translation functions at |
| 237 | boot and module load time according to the position of the |
| 238 | kernel in system memory. |
| 239 | |
| 240 | This can only be used with non-XIP MMU kernels where the base |
| 241 | of physical memory is at a 16MB boundary. |
| 242 | |
| 243 | Only disable this option if you know that you do not require |
| 244 | this feature (eg, building a kernel for a single machine) and |
| 245 | you need to shrink the kernel to the minimal size. |
| 246 | |
| 247 | config NEED_MACH_GPIO_H |
| 248 | bool |
| 249 | help |
| 250 | Select this when mach/gpio.h is required to provide special |
| 251 | definitions for this platform. The need for mach/gpio.h should |
| 252 | be avoided when possible. |
| 253 | |
| 254 | config NEED_MACH_IO_H |
| 255 | bool |
| 256 | help |
| 257 | Select this when mach/io.h is required to provide special |
| 258 | definitions for this platform. The need for mach/io.h should |
| 259 | be avoided when possible. |
| 260 | |
| 261 | config NEED_MACH_MEMORY_H |
| 262 | bool |
| 263 | help |
| 264 | Select this when mach/memory.h is required to provide special |
| 265 | definitions for this platform. The need for mach/memory.h should |
| 266 | be avoided when possible. |
| 267 | |
| 268 | config PHYS_OFFSET |
| 269 | hex "Physical address of main memory" if MMU |
| 270 | depends on !ARM_PATCH_PHYS_VIRT && !NEED_MACH_MEMORY_H |
| 271 | default DRAM_BASE if !MMU |
| 272 | help |
| 273 | Please provide the physical address corresponding to the |
| 274 | location of main memory in your system. |
| 275 | |
| 276 | config GENERIC_BUG |
| 277 | def_bool y |
| 278 | depends on BUG |
| 279 | |
| 280 | source "init/Kconfig" |
| 281 | |
| 282 | source "kernel/Kconfig.freezer" |
| 283 | |
| 284 | menu "System Type" |
| 285 | |
| 286 | config MMU |
| 287 | bool "MMU-based Paged Memory Management Support" |
| 288 | default y |
| 289 | help |
| 290 | Select if you want MMU-based virtualised addressing space |
| 291 | support by paged memory management. If unsure, say 'Y'. |
| 292 | |
| 293 | # |
| 294 | # The "ARM system type" choice list is ordered alphabetically by option |
| 295 | # text. Please add new entries in the option alphabetic order. |
| 296 | # |
| 297 | choice |
| 298 | prompt "ARM system type" |
| 299 | default ARCH_VERSATILE if !MMU |
| 300 | default ARCH_MULTIPLATFORM if MMU |
| 301 | |
| 302 | config ARCH_MULTIPLATFORM |
| 303 | bool "Allow multiple platforms to be selected" |
| 304 | depends on MMU |
| 305 | select ARM_PATCH_PHYS_VIRT |
| 306 | select AUTO_ZRELADDR |
| 307 | select COMMON_CLK |
| 308 | select MULTI_IRQ_HANDLER |
| 309 | select SPARSE_IRQ |
| 310 | select USE_OF |
| 311 | |
| 312 | config ARCH_INTEGRATOR |
| 313 | bool "ARM Ltd. Integrator family" |
| 314 | select ARCH_HAS_CPUFREQ |
| 315 | select ARM_AMBA |
| 316 | select COMMON_CLK |
| 317 | select COMMON_CLK_VERSATILE |
| 318 | select GENERIC_CLOCKEVENTS |
| 319 | select HAVE_TCM |
| 320 | select ICST |
| 321 | select MULTI_IRQ_HANDLER |
| 322 | select NEED_MACH_MEMORY_H |
| 323 | select PLAT_VERSATILE |
| 324 | select SPARSE_IRQ |
| 325 | select USE_OF |
| 326 | select VERSATILE_FPGA_IRQ |
| 327 | help |
| 328 | Support for ARM's Integrator platform. |
| 329 | |
| 330 | config ARCH_REALVIEW |
| 331 | bool "ARM Ltd. RealView family" |
| 332 | select ARCH_WANT_OPTIONAL_GPIOLIB |
| 333 | select ARM_AMBA |
| 334 | select ARM_TIMER_SP804 |
| 335 | select COMMON_CLK |
| 336 | select COMMON_CLK_VERSATILE |
| 337 | select GENERIC_CLOCKEVENTS |
| 338 | select GPIO_PL061 if GPIOLIB |
| 339 | select ICST |
| 340 | select NEED_MACH_MEMORY_H |
| 341 | select PLAT_VERSATILE |
| 342 | select PLAT_VERSATILE_CLCD |
| 343 | help |
| 344 | This enables support for ARM Ltd RealView boards. |
| 345 | |
| 346 | config ARCH_VERSATILE |
| 347 | bool "ARM Ltd. Versatile family" |
| 348 | select ARCH_WANT_OPTIONAL_GPIOLIB |
| 349 | select ARM_AMBA |
| 350 | select ARM_TIMER_SP804 |
| 351 | select ARM_VIC |
| 352 | select CLKDEV_LOOKUP |
| 353 | select GENERIC_CLOCKEVENTS |
| 354 | select HAVE_MACH_CLKDEV |
| 355 | select ICST |
| 356 | select PLAT_VERSATILE |
| 357 | select PLAT_VERSATILE_CLCD |
| 358 | select PLAT_VERSATILE_CLOCK |
| 359 | select VERSATILE_FPGA_IRQ |
| 360 | help |
| 361 | This enables support for ARM Ltd Versatile board. |
| 362 | |
| 363 | config ARCH_AT91 |
| 364 | bool "Atmel AT91" |
| 365 | select ARCH_REQUIRE_GPIOLIB |
| 366 | select CLKDEV_LOOKUP |
| 367 | select IRQ_DOMAIN |
| 368 | select NEED_MACH_GPIO_H |
| 369 | select NEED_MACH_IO_H if PCCARD |
| 370 | select PINCTRL |
| 371 | select PINCTRL_AT91 if USE_OF |
| 372 | help |
| 373 | This enables support for systems based on Atmel |
| 374 | AT91RM9200 and AT91SAM9* processors. |
| 375 | |
| 376 | config ARCH_CLPS711X |
| 377 | bool "Cirrus Logic CLPS711x/EP721x/EP731x-based" |
| 378 | select ARCH_REQUIRE_GPIOLIB |
| 379 | select AUTO_ZRELADDR |
| 380 | select CLKSRC_MMIO |
| 381 | select COMMON_CLK |
| 382 | select CPU_ARM720T |
| 383 | select GENERIC_CLOCKEVENTS |
| 384 | select MFD_SYSCON |
| 385 | select MULTI_IRQ_HANDLER |
| 386 | select SPARSE_IRQ |
| 387 | help |
| 388 | Support for Cirrus Logic 711x/721x/731x based boards. |
| 389 | |
| 390 | config ARCH_GEMINI |
| 391 | bool "Cortina Systems Gemini" |
| 392 | select ARCH_REQUIRE_GPIOLIB |
| 393 | select CLKSRC_MMIO |
| 394 | select CPU_FA526 |
| 395 | select GENERIC_CLOCKEVENTS |
| 396 | help |
| 397 | Support for the Cortina Systems Gemini family SoCs |
| 398 | |
| 399 | config ARCH_EBSA110 |
| 400 | bool "EBSA-110" |
| 401 | select ARCH_USES_GETTIMEOFFSET |
| 402 | select CPU_SA110 |
| 403 | select ISA |
| 404 | select NEED_MACH_IO_H |
| 405 | select NEED_MACH_MEMORY_H |
| 406 | select NO_IOPORT |
| 407 | help |
| 408 | This is an evaluation board for the StrongARM processor available |
| 409 | from Digital. It has limited hardware on-board, including an |
| 410 | Ethernet interface, two PCMCIA sockets, two serial ports and a |
| 411 | parallel port. |
| 412 | |
| 413 | config ARCH_EP93XX |
| 414 | bool "EP93xx-based" |
| 415 | select ARCH_HAS_HOLES_MEMORYMODEL |
| 416 | select ARCH_REQUIRE_GPIOLIB |
| 417 | select ARCH_USES_GETTIMEOFFSET |
| 418 | select ARM_AMBA |
| 419 | select ARM_VIC |
| 420 | select CLKDEV_LOOKUP |
| 421 | select CPU_ARM920T |
| 422 | select NEED_MACH_MEMORY_H |
| 423 | help |
| 424 | This enables support for the Cirrus EP93xx series of CPUs. |
| 425 | |
| 426 | config ARCH_FOOTBRIDGE |
| 427 | bool "FootBridge" |
| 428 | select CPU_SA110 |
| 429 | select FOOTBRIDGE |
| 430 | select GENERIC_CLOCKEVENTS |
| 431 | select HAVE_IDE |
| 432 | select NEED_MACH_IO_H if !MMU |
| 433 | select NEED_MACH_MEMORY_H |
| 434 | help |
| 435 | Support for systems based on the DC21285 companion chip |
| 436 | ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. |
| 437 | |
| 438 | config ARCH_NETX |
| 439 | bool "Hilscher NetX based" |
| 440 | select ARM_VIC |
| 441 | select CLKSRC_MMIO |
| 442 | select CPU_ARM926T |
| 443 | select GENERIC_CLOCKEVENTS |
| 444 | help |
| 445 | This enables support for systems based on the Hilscher NetX Soc |
| 446 | |
| 447 | config ARCH_IOP13XX |
| 448 | bool "IOP13xx-based" |
| 449 | depends on MMU |
| 450 | select CPU_XSC3 |
| 451 | select NEED_MACH_MEMORY_H |
| 452 | select NEED_RET_TO_USER |
| 453 | select PCI |
| 454 | select PLAT_IOP |
| 455 | select VMSPLIT_1G |
| 456 | help |
| 457 | Support for Intel's IOP13XX (XScale) family of processors. |
| 458 | |
| 459 | config ARCH_IOP32X |
| 460 | bool "IOP32x-based" |
| 461 | depends on MMU |
| 462 | select ARCH_REQUIRE_GPIOLIB |
| 463 | select CPU_XSCALE |
| 464 | select GPIO_IOP |
| 465 | select NEED_RET_TO_USER |
| 466 | select PCI |
| 467 | select PLAT_IOP |
| 468 | help |
| 469 | Support for Intel's 80219 and IOP32X (XScale) family of |
| 470 | processors. |
| 471 | |
| 472 | config ARCH_IOP33X |
| 473 | bool "IOP33x-based" |
| 474 | depends on MMU |
| 475 | select ARCH_REQUIRE_GPIOLIB |
| 476 | select CPU_XSCALE |
| 477 | select GPIO_IOP |
| 478 | select NEED_RET_TO_USER |
| 479 | select PCI |
| 480 | select PLAT_IOP |
| 481 | help |
| 482 | Support for Intel's IOP33X (XScale) family of processors. |
| 483 | |
| 484 | config ARCH_IXP4XX |
| 485 | bool "IXP4xx-based" |
| 486 | depends on MMU |
| 487 | select ARCH_HAS_DMA_SET_COHERENT_MASK |
| 488 | select ARCH_SUPPORTS_BIG_ENDIAN |
| 489 | select ARCH_REQUIRE_GPIOLIB |
| 490 | select CLKSRC_MMIO |
| 491 | select CPU_XSCALE |
| 492 | select DMABOUNCE if PCI |
| 493 | select GENERIC_CLOCKEVENTS |
| 494 | select MIGHT_HAVE_PCI |
| 495 | select NEED_MACH_IO_H |
| 496 | select USB_EHCI_BIG_ENDIAN_DESC |
| 497 | select USB_EHCI_BIG_ENDIAN_MMIO |
| 498 | help |
| 499 | Support for Intel's IXP4XX (XScale) family of processors. |
| 500 | |
| 501 | config ARCH_DOVE |
| 502 | bool "Marvell Dove" |
| 503 | select ARCH_REQUIRE_GPIOLIB |
| 504 | select CPU_PJ4 |
| 505 | select GENERIC_CLOCKEVENTS |
| 506 | select MIGHT_HAVE_PCI |
| 507 | select MVEBU_MBUS |
| 508 | select PINCTRL |
| 509 | select PINCTRL_DOVE |
| 510 | select PLAT_ORION_LEGACY |
| 511 | select USB_ARCH_HAS_EHCI |
| 512 | help |
| 513 | Support for the Marvell Dove SoC 88AP510 |
| 514 | |
| 515 | config ARCH_KIRKWOOD |
| 516 | bool "Marvell Kirkwood" |
| 517 | select ARCH_HAS_CPUFREQ |
| 518 | select ARCH_REQUIRE_GPIOLIB |
| 519 | select CPU_FEROCEON |
| 520 | select GENERIC_CLOCKEVENTS |
| 521 | select MVEBU_MBUS |
| 522 | select PCI |
| 523 | select PCI_QUIRKS |
| 524 | select PINCTRL |
| 525 | select PINCTRL_KIRKWOOD |
| 526 | select PLAT_ORION_LEGACY |
| 527 | help |
| 528 | Support for the following Marvell Kirkwood series SoCs: |
| 529 | 88F6180, 88F6192 and 88F6281. |
| 530 | |
| 531 | config ARCH_MV78XX0 |
| 532 | bool "Marvell MV78xx0" |
| 533 | select ARCH_REQUIRE_GPIOLIB |
| 534 | select CPU_FEROCEON |
| 535 | select GENERIC_CLOCKEVENTS |
| 536 | select MVEBU_MBUS |
| 537 | select PCI |
| 538 | select PLAT_ORION_LEGACY |
| 539 | help |
| 540 | Support for the following Marvell MV78xx0 series SoCs: |
| 541 | MV781x0, MV782x0. |
| 542 | |
| 543 | config ARCH_ORION5X |
| 544 | bool "Marvell Orion" |
| 545 | depends on MMU |
| 546 | select ARCH_REQUIRE_GPIOLIB |
| 547 | select CPU_FEROCEON |
| 548 | select GENERIC_CLOCKEVENTS |
| 549 | select MVEBU_MBUS |
| 550 | select PCI |
| 551 | select PLAT_ORION_LEGACY |
| 552 | help |
| 553 | Support for the following Marvell Orion 5x series SoCs: |
| 554 | Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182), |
| 555 | Orion-2 (5281), Orion-1-90 (6183). |
| 556 | |
| 557 | config ARCH_MMP |
| 558 | bool "Marvell PXA168/910/MMP2" |
| 559 | depends on MMU |
| 560 | select ARCH_REQUIRE_GPIOLIB |
| 561 | select CLKDEV_LOOKUP |
| 562 | select GENERIC_ALLOCATOR |
| 563 | select GENERIC_CLOCKEVENTS |
| 564 | select GPIO_PXA |
| 565 | select IRQ_DOMAIN |
| 566 | select MULTI_IRQ_HANDLER |
| 567 | select PINCTRL |
| 568 | select PLAT_PXA |
| 569 | select SPARSE_IRQ |
| 570 | help |
| 571 | Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line. |
| 572 | |
| 573 | config ARCH_KS8695 |
| 574 | bool "Micrel/Kendin KS8695" |
| 575 | select ARCH_REQUIRE_GPIOLIB |
| 576 | select CLKSRC_MMIO |
| 577 | select CPU_ARM922T |
| 578 | select GENERIC_CLOCKEVENTS |
| 579 | select NEED_MACH_MEMORY_H |
| 580 | help |
| 581 | Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based |
| 582 | System-on-Chip devices. |
| 583 | |
| 584 | config ARCH_W90X900 |
| 585 | bool "Nuvoton W90X900 CPU" |
| 586 | select ARCH_REQUIRE_GPIOLIB |
| 587 | select CLKDEV_LOOKUP |
| 588 | select CLKSRC_MMIO |
| 589 | select CPU_ARM926T |
| 590 | select GENERIC_CLOCKEVENTS |
| 591 | help |
| 592 | Support for Nuvoton (Winbond logic dept.) ARM9 processor, |
| 593 | At present, the w90x900 has been renamed nuc900, regarding |
| 594 | the ARM series product line, you can login the following |
| 595 | link address to know more. |
| 596 | |
| 597 | <http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/ |
| 598 | ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller> |
| 599 | |
| 600 | config ARCH_LPC32XX |
| 601 | bool "NXP LPC32XX" |
| 602 | select ARCH_REQUIRE_GPIOLIB |
| 603 | select ARM_AMBA |
| 604 | select CLKDEV_LOOKUP |
| 605 | select CLKSRC_MMIO |
| 606 | select CPU_ARM926T |
| 607 | select GENERIC_CLOCKEVENTS |
| 608 | select HAVE_IDE |
| 609 | select HAVE_PWM |
| 610 | select USB_ARCH_HAS_OHCI |
| 611 | select USE_OF |
| 612 | help |
| 613 | Support for the NXP LPC32XX family of processors |
| 614 | |
| 615 | config ARCH_PXA |
| 616 | bool "PXA2xx/PXA3xx-based" |
| 617 | depends on MMU |
| 618 | select ARCH_HAS_CPUFREQ |
| 619 | select ARCH_MTD_XIP |
| 620 | select ARCH_REQUIRE_GPIOLIB |
| 621 | select ARM_CPU_SUSPEND if PM |
| 622 | select AUTO_ZRELADDR |
| 623 | select CLKDEV_LOOKUP |
| 624 | select CLKSRC_MMIO |
| 625 | select GENERIC_CLOCKEVENTS |
| 626 | select GPIO_PXA |
| 627 | select HAVE_IDE |
| 628 | select MULTI_IRQ_HANDLER |
| 629 | select PLAT_PXA |
| 630 | select SPARSE_IRQ |
| 631 | help |
| 632 | Support for Intel/Marvell's PXA2xx/PXA3xx processor line. |
| 633 | |
| 634 | config ARCH_MSM |
| 635 | bool "Qualcomm MSM" |
| 636 | select ARCH_REQUIRE_GPIOLIB |
| 637 | select CLKSRC_OF if OF |
| 638 | select COMMON_CLK |
| 639 | select GENERIC_CLOCKEVENTS |
| 640 | help |
| 641 | Support for Qualcomm MSM/QSD based systems. This runs on the |
| 642 | apps processor of the MSM/QSD and depends on a shared memory |
| 643 | interface to the modem processor which runs the baseband |
| 644 | stack and controls some vital subsystems |
| 645 | (clock and power control, etc). |
| 646 | |
| 647 | config ARCH_SHMOBILE |
| 648 | bool "Renesas SH-Mobile / R-Mobile" |
| 649 | select ARM_PATCH_PHYS_VIRT |
| 650 | select CLKDEV_LOOKUP |
| 651 | select GENERIC_CLOCKEVENTS |
| 652 | select HAVE_ARM_SCU if SMP |
| 653 | select HAVE_ARM_TWD if SMP |
| 654 | select HAVE_MACH_CLKDEV |
| 655 | select HAVE_SMP |
| 656 | select MIGHT_HAVE_CACHE_L2X0 |
| 657 | select MULTI_IRQ_HANDLER |
| 658 | select NO_IOPORT |
| 659 | select PINCTRL |
| 660 | select PM_GENERIC_DOMAINS if PM |
| 661 | select SPARSE_IRQ |
| 662 | help |
| 663 | Support for Renesas's SH-Mobile and R-Mobile ARM platforms. |
| 664 | |
| 665 | config ARCH_RPC |
| 666 | bool "RiscPC" |
| 667 | select ARCH_ACORN |
| 668 | select ARCH_MAY_HAVE_PC_FDC |
| 669 | select ARCH_SPARSEMEM_ENABLE |
| 670 | select ARCH_USES_GETTIMEOFFSET |
| 671 | select FIQ |
| 672 | select HAVE_IDE |
| 673 | select HAVE_PATA_PLATFORM |
| 674 | select ISA_DMA_API |
| 675 | select NEED_MACH_IO_H |
| 676 | select NEED_MACH_MEMORY_H |
| 677 | select NO_IOPORT |
| 678 | select VIRT_TO_BUS |
| 679 | help |
| 680 | On the Acorn Risc-PC, Linux can support the internal IDE disk and |
| 681 | CD-ROM interface, serial and parallel port, and the floppy drive. |
| 682 | |
| 683 | config ARCH_SA1100 |
| 684 | bool "SA1100-based" |
| 685 | select ARCH_HAS_CPUFREQ |
| 686 | select ARCH_MTD_XIP |
| 687 | select ARCH_REQUIRE_GPIOLIB |
| 688 | select ARCH_SPARSEMEM_ENABLE |
| 689 | select CLKDEV_LOOKUP |
| 690 | select CLKSRC_MMIO |
| 691 | select CPU_FREQ |
| 692 | select CPU_SA1100 |
| 693 | select GENERIC_CLOCKEVENTS |
| 694 | select HAVE_IDE |
| 695 | select ISA |
| 696 | select NEED_MACH_MEMORY_H |
| 697 | select SPARSE_IRQ |
| 698 | help |
| 699 | Support for StrongARM 11x0 based boards. |
| 700 | |
| 701 | config ARCH_S3C24XX |
| 702 | bool "Samsung S3C24XX SoCs" |
| 703 | select ARCH_HAS_CPUFREQ |
| 704 | select ARCH_REQUIRE_GPIOLIB |
| 705 | select CLKDEV_LOOKUP |
| 706 | select CLKSRC_SAMSUNG_PWM |
| 707 | select GENERIC_CLOCKEVENTS |
| 708 | select GPIO_SAMSUNG |
| 709 | select HAVE_S3C2410_I2C if I2C |
| 710 | select HAVE_S3C2410_WATCHDOG if WATCHDOG |
| 711 | select HAVE_S3C_RTC if RTC_CLASS |
| 712 | select MULTI_IRQ_HANDLER |
| 713 | select NEED_MACH_GPIO_H |
| 714 | select NEED_MACH_IO_H |
| 715 | select SAMSUNG_ATAGS |
| 716 | help |
| 717 | Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443 |
| 718 | and S3C2450 SoCs based systems, such as the Simtec Electronics BAST |
| 719 | (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the |
| 720 | Samsung SMDK2410 development board (and derivatives). |
| 721 | |
| 722 | config ARCH_S3C64XX |
| 723 | bool "Samsung S3C64XX" |
| 724 | select ARCH_HAS_CPUFREQ |
| 725 | select ARCH_REQUIRE_GPIOLIB |
| 726 | select ARM_VIC |
| 727 | select CLKDEV_LOOKUP |
| 728 | select CLKSRC_SAMSUNG_PWM |
| 729 | select COMMON_CLK |
| 730 | select CPU_V6 |
| 731 | select GENERIC_CLOCKEVENTS |
| 732 | select GPIO_SAMSUNG |
| 733 | select HAVE_S3C2410_I2C if I2C |
| 734 | select HAVE_S3C2410_WATCHDOG if WATCHDOG |
| 735 | select HAVE_TCM |
| 736 | select NEED_MACH_GPIO_H |
| 737 | select NO_IOPORT |
| 738 | select PLAT_SAMSUNG |
| 739 | select PM_GENERIC_DOMAINS |
| 740 | select S3C_DEV_NAND |
| 741 | select S3C_GPIO_TRACK |
| 742 | select SAMSUNG_ATAGS |
| 743 | select SAMSUNG_GPIOLIB_4BIT |
| 744 | select SAMSUNG_WAKEMASK |
| 745 | select SAMSUNG_WDT_RESET |
| 746 | select USB_ARCH_HAS_OHCI |
| 747 | help |
| 748 | Samsung S3C64XX series based systems |
| 749 | |
| 750 | config ARCH_S5P64X0 |
| 751 | bool "Samsung S5P6440 S5P6450" |
| 752 | select CLKDEV_LOOKUP |
| 753 | select CLKSRC_SAMSUNG_PWM |
| 754 | select CPU_V6 |
| 755 | select GENERIC_CLOCKEVENTS |
| 756 | select GPIO_SAMSUNG |
| 757 | select HAVE_S3C2410_I2C if I2C |
| 758 | select HAVE_S3C2410_WATCHDOG if WATCHDOG |
| 759 | select HAVE_S3C_RTC if RTC_CLASS |
| 760 | select NEED_MACH_GPIO_H |
| 761 | select SAMSUNG_ATAGS |
| 762 | select SAMSUNG_WDT_RESET |
| 763 | help |
| 764 | Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440, |
| 765 | SMDK6450. |
| 766 | |
| 767 | config ARCH_S5PC100 |
| 768 | bool "Samsung S5PC100" |
| 769 | select ARCH_REQUIRE_GPIOLIB |
| 770 | select CLKDEV_LOOKUP |
| 771 | select CLKSRC_SAMSUNG_PWM |
| 772 | select CPU_V7 |
| 773 | select GENERIC_CLOCKEVENTS |
| 774 | select GPIO_SAMSUNG |
| 775 | select HAVE_S3C2410_I2C if I2C |
| 776 | select HAVE_S3C2410_WATCHDOG if WATCHDOG |
| 777 | select HAVE_S3C_RTC if RTC_CLASS |
| 778 | select NEED_MACH_GPIO_H |
| 779 | select SAMSUNG_ATAGS |
| 780 | select SAMSUNG_WDT_RESET |
| 781 | help |
| 782 | Samsung S5PC100 series based systems |
| 783 | |
| 784 | config ARCH_S5PV210 |
| 785 | bool "Samsung S5PV210/S5PC110" |
| 786 | select ARCH_HAS_CPUFREQ |
| 787 | select ARCH_HAS_HOLES_MEMORYMODEL |
| 788 | select ARCH_SPARSEMEM_ENABLE |
| 789 | select CLKDEV_LOOKUP |
| 790 | select CLKSRC_SAMSUNG_PWM |
| 791 | select CPU_V7 |
| 792 | select GENERIC_CLOCKEVENTS |
| 793 | select GPIO_SAMSUNG |
| 794 | select HAVE_S3C2410_I2C if I2C |
| 795 | select HAVE_S3C2410_WATCHDOG if WATCHDOG |
| 796 | select HAVE_S3C_RTC if RTC_CLASS |
| 797 | select NEED_MACH_GPIO_H |
| 798 | select NEED_MACH_MEMORY_H |
| 799 | select SAMSUNG_ATAGS |
| 800 | help |
| 801 | Samsung S5PV210/S5PC110 series based systems |
| 802 | |
| 803 | config ARCH_EXYNOS |
| 804 | bool "Samsung EXYNOS" |
| 805 | select ARCH_HAS_CPUFREQ |
| 806 | select ARCH_HAS_HOLES_MEMORYMODEL |
| 807 | select ARCH_REQUIRE_GPIOLIB |
| 808 | select ARCH_SPARSEMEM_ENABLE |
| 809 | select ARM_GIC |
| 810 | select COMMON_CLK |
| 811 | select CPU_V7 |
| 812 | select GENERIC_CLOCKEVENTS |
| 813 | select HAVE_S3C2410_I2C if I2C |
| 814 | select HAVE_S3C2410_WATCHDOG if WATCHDOG |
| 815 | select HAVE_S3C_RTC if RTC_CLASS |
| 816 | select NEED_MACH_MEMORY_H |
| 817 | select SPARSE_IRQ |
| 818 | select USE_OF |
| 819 | help |
| 820 | Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5) |
| 821 | |
| 822 | config ARCH_DAVINCI |
| 823 | bool "TI DaVinci" |
| 824 | select ARCH_HAS_HOLES_MEMORYMODEL |
| 825 | select ARCH_REQUIRE_GPIOLIB |
| 826 | select CLKDEV_LOOKUP |
| 827 | select GENERIC_ALLOCATOR |
| 828 | select GENERIC_CLOCKEVENTS |
| 829 | select GENERIC_IRQ_CHIP |
| 830 | select HAVE_IDE |
| 831 | select TI_PRIV_EDMA |
| 832 | select USE_OF |
| 833 | select ZONE_DMA |
| 834 | help |
| 835 | Support for TI's DaVinci platform. |
| 836 | |
| 837 | config ARCH_OMAP1 |
| 838 | bool "TI OMAP1" |
| 839 | depends on MMU |
| 840 | select ARCH_HAS_CPUFREQ |
| 841 | select ARCH_HAS_HOLES_MEMORYMODEL |
| 842 | select ARCH_OMAP |
| 843 | select ARCH_REQUIRE_GPIOLIB |
| 844 | select CLKDEV_LOOKUP |
| 845 | select CLKSRC_MMIO |
| 846 | select GENERIC_CLOCKEVENTS |
| 847 | select GENERIC_IRQ_CHIP |
| 848 | select HAVE_IDE |
| 849 | select IRQ_DOMAIN |
| 850 | select NEED_MACH_IO_H if PCCARD |
| 851 | select NEED_MACH_MEMORY_H |
| 852 | help |
| 853 | Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx) |
| 854 | |
| 855 | endchoice |
| 856 | |
| 857 | menu "Multiple platform selection" |
| 858 | depends on ARCH_MULTIPLATFORM |
| 859 | |
| 860 | comment "CPU Core family selection" |
| 861 | |
| 862 | config ARCH_MULTI_V4T |
| 863 | bool "ARMv4T based platforms (ARM720T, ARM920T, ...)" |
| 864 | depends on !ARCH_MULTI_V6_V7 |
| 865 | select ARCH_MULTI_V4_V5 |
| 866 | select CPU_ARM920T if !(CPU_ARM7TDMI || CPU_ARM720T || \ |
| 867 | CPU_ARM740T || CPU_ARM9TDMI || CPU_ARM922T || \ |
| 868 | CPU_ARM925T || CPU_ARM940T) |
| 869 | |
| 870 | config ARCH_MULTI_V5 |
| 871 | bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)" |
| 872 | depends on !ARCH_MULTI_V6_V7 |
| 873 | select ARCH_MULTI_V4_V5 |
| 874 | select CPU_ARM926T if (!CPU_ARM946E || CPU_ARM1020 || \ |
| 875 | CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || \ |
| 876 | CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_FEROCEON) |
| 877 | |
| 878 | config ARCH_MULTI_V4_V5 |
| 879 | bool |
| 880 | |
| 881 | config ARCH_MULTI_V6 |
| 882 | bool "ARMv6 based platforms (ARM11)" |
| 883 | select ARCH_MULTI_V6_V7 |
| 884 | select CPU_V6 |
| 885 | |
| 886 | config ARCH_MULTI_V7 |
| 887 | bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)" |
| 888 | default y |
| 889 | select ARCH_MULTI_V6_V7 |
| 890 | select CPU_V7 |
| 891 | |
| 892 | config ARCH_MULTI_V6_V7 |
| 893 | bool |
| 894 | |
| 895 | config ARCH_MULTI_CPU_AUTO |
| 896 | def_bool !(ARCH_MULTI_V4 || ARCH_MULTI_V4T || ARCH_MULTI_V6_V7) |
| 897 | select ARCH_MULTI_V5 |
| 898 | |
| 899 | endmenu |
| 900 | |
| 901 | # |
| 902 | # This is sorted alphabetically by mach-* pathname. However, plat-* |
| 903 | # Kconfigs may be included either alphabetically (according to the |
| 904 | # plat- suffix) or along side the corresponding mach-* source. |
| 905 | # |
| 906 | source "arch/arm/mach-mvebu/Kconfig" |
| 907 | |
| 908 | source "arch/arm/mach-at91/Kconfig" |
| 909 | |
| 910 | source "arch/arm/mach-bcm/Kconfig" |
| 911 | |
| 912 | source "arch/arm/mach-bcm2835/Kconfig" |
| 913 | |
| 914 | source "arch/arm/mach-clps711x/Kconfig" |
| 915 | |
| 916 | source "arch/arm/mach-cns3xxx/Kconfig" |
| 917 | |
| 918 | source "arch/arm/mach-davinci/Kconfig" |
| 919 | |
| 920 | source "arch/arm/mach-dove/Kconfig" |
| 921 | |
| 922 | source "arch/arm/mach-ep93xx/Kconfig" |
| 923 | |
| 924 | source "arch/arm/mach-footbridge/Kconfig" |
| 925 | |
| 926 | source "arch/arm/mach-gemini/Kconfig" |
| 927 | |
| 928 | source "arch/arm/mach-highbank/Kconfig" |
| 929 | |
| 930 | source "arch/arm/mach-integrator/Kconfig" |
| 931 | |
| 932 | source "arch/arm/mach-iop32x/Kconfig" |
| 933 | |
| 934 | source "arch/arm/mach-iop33x/Kconfig" |
| 935 | |
| 936 | source "arch/arm/mach-iop13xx/Kconfig" |
| 937 | |
| 938 | source "arch/arm/mach-ixp4xx/Kconfig" |
| 939 | |
| 940 | source "arch/arm/mach-keystone/Kconfig" |
| 941 | |
| 942 | source "arch/arm/mach-kirkwood/Kconfig" |
| 943 | |
| 944 | source "arch/arm/mach-ks8695/Kconfig" |
| 945 | |
| 946 | source "arch/arm/mach-msm/Kconfig" |
| 947 | |
| 948 | source "arch/arm/mach-mv78xx0/Kconfig" |
| 949 | |
| 950 | source "arch/arm/mach-imx/Kconfig" |
| 951 | |
| 952 | source "arch/arm/mach-mxs/Kconfig" |
| 953 | |
| 954 | source "arch/arm/mach-netx/Kconfig" |
| 955 | |
| 956 | source "arch/arm/mach-nomadik/Kconfig" |
| 957 | |
| 958 | source "arch/arm/mach-nspire/Kconfig" |
| 959 | |
| 960 | source "arch/arm/plat-omap/Kconfig" |
| 961 | |
| 962 | source "arch/arm/mach-omap1/Kconfig" |
| 963 | |
| 964 | source "arch/arm/mach-omap2/Kconfig" |
| 965 | |
| 966 | source "arch/arm/mach-orion5x/Kconfig" |
| 967 | |
| 968 | source "arch/arm/mach-picoxcell/Kconfig" |
| 969 | |
| 970 | source "arch/arm/mach-pxa/Kconfig" |
| 971 | source "arch/arm/plat-pxa/Kconfig" |
| 972 | |
| 973 | source "arch/arm/mach-mmp/Kconfig" |
| 974 | |
| 975 | source "arch/arm/mach-realview/Kconfig" |
| 976 | |
| 977 | source "arch/arm/mach-rockchip/Kconfig" |
| 978 | |
| 979 | source "arch/arm/mach-sa1100/Kconfig" |
| 980 | |
| 981 | source "arch/arm/plat-samsung/Kconfig" |
| 982 | |
| 983 | source "arch/arm/mach-socfpga/Kconfig" |
| 984 | |
| 985 | source "arch/arm/mach-spear/Kconfig" |
| 986 | |
| 987 | source "arch/arm/mach-sti/Kconfig" |
| 988 | |
| 989 | source "arch/arm/mach-s3c24xx/Kconfig" |
| 990 | |
| 991 | source "arch/arm/mach-s3c64xx/Kconfig" |
| 992 | |
| 993 | source "arch/arm/mach-s5p64x0/Kconfig" |
| 994 | |
| 995 | source "arch/arm/mach-s5pc100/Kconfig" |
| 996 | |
| 997 | source "arch/arm/mach-s5pv210/Kconfig" |
| 998 | |
| 999 | source "arch/arm/mach-exynos/Kconfig" |
| 1000 | |
| 1001 | source "arch/arm/mach-shmobile/Kconfig" |
| 1002 | |
| 1003 | source "arch/arm/mach-sunxi/Kconfig" |
| 1004 | |
| 1005 | source "arch/arm/mach-prima2/Kconfig" |
| 1006 | |
| 1007 | source "arch/arm/mach-tegra/Kconfig" |
| 1008 | |
| 1009 | source "arch/arm/mach-u300/Kconfig" |
| 1010 | |
| 1011 | source "arch/arm/mach-ux500/Kconfig" |
| 1012 | |
| 1013 | source "arch/arm/mach-versatile/Kconfig" |
| 1014 | |
| 1015 | source "arch/arm/mach-vexpress/Kconfig" |
| 1016 | source "arch/arm/plat-versatile/Kconfig" |
| 1017 | |
| 1018 | source "arch/arm/mach-virt/Kconfig" |
| 1019 | |
| 1020 | source "arch/arm/mach-vt8500/Kconfig" |
| 1021 | |
| 1022 | source "arch/arm/mach-w90x900/Kconfig" |
| 1023 | |
| 1024 | source "arch/arm/mach-zynq/Kconfig" |
| 1025 | |
| 1026 | # Definitions to make life easier |
| 1027 | config ARCH_ACORN |
| 1028 | bool |
| 1029 | |
| 1030 | config PLAT_IOP |
| 1031 | bool |
| 1032 | select GENERIC_CLOCKEVENTS |
| 1033 | |
| 1034 | config PLAT_ORION |
| 1035 | bool |
| 1036 | select CLKSRC_MMIO |
| 1037 | select COMMON_CLK |
| 1038 | select GENERIC_IRQ_CHIP |
| 1039 | select IRQ_DOMAIN |
| 1040 | |
| 1041 | config PLAT_ORION_LEGACY |
| 1042 | bool |
| 1043 | select PLAT_ORION |
| 1044 | |
| 1045 | config PLAT_PXA |
| 1046 | bool |
| 1047 | |
| 1048 | config PLAT_VERSATILE |
| 1049 | bool |
| 1050 | |
| 1051 | config ARM_TIMER_SP804 |
| 1052 | bool |
| 1053 | select CLKSRC_MMIO |
| 1054 | select CLKSRC_OF if OF |
| 1055 | |
| 1056 | source arch/arm/mm/Kconfig |
| 1057 | |
| 1058 | config ARM_NR_BANKS |
| 1059 | int |
| 1060 | default 16 if ARCH_EP93XX |
| 1061 | default 8 |
| 1062 | |
| 1063 | config IWMMXT |
| 1064 | bool "Enable iWMMXt support" if !CPU_PJ4 |
| 1065 | depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4 |
| 1066 | default y if PXA27x || PXA3xx || ARCH_MMP || CPU_PJ4 |
| 1067 | help |
| 1068 | Enable support for iWMMXt context switching at run time if |
| 1069 | running on a CPU that supports it. |
| 1070 | |
| 1071 | config MULTI_IRQ_HANDLER |
| 1072 | bool |
| 1073 | help |
| 1074 | Allow each machine to specify it's own IRQ handler at run time. |
| 1075 | |
| 1076 | if !MMU |
| 1077 | source "arch/arm/Kconfig-nommu" |
| 1078 | endif |
| 1079 | |
| 1080 | config PJ4B_ERRATA_4742 |
| 1081 | bool "PJ4B Errata 4742: IDLE Wake Up Commands can Cause the CPU Core to Cease Operation" |
| 1082 | depends on CPU_PJ4B && MACH_ARMADA_370 |
| 1083 | default y |
| 1084 | help |
| 1085 | When coming out of either a Wait for Interrupt (WFI) or a Wait for |
| 1086 | Event (WFE) IDLE states, a specific timing sensitivity exists between |
| 1087 | the retiring WFI/WFE instructions and the newly issued subsequent |
| 1088 | instructions. This sensitivity can result in a CPU hang scenario. |
| 1089 | Workaround: |
| 1090 | The software must insert either a Data Synchronization Barrier (DSB) |
| 1091 | or Data Memory Barrier (DMB) command immediately after the WFI/WFE |
| 1092 | instruction |
| 1093 | |
| 1094 | config ARM_ERRATA_326103 |
| 1095 | bool "ARM errata: FSR write bit incorrect on a SWP to read-only memory" |
| 1096 | depends on CPU_V6 |
| 1097 | help |
| 1098 | Executing a SWP instruction to read-only memory does not set bit 11 |
| 1099 | of the FSR on the ARM 1136 prior to r1p0. This causes the kernel to |
| 1100 | treat the access as a read, preventing a COW from occurring and |
| 1101 | causing the faulting task to livelock. |
| 1102 | |
| 1103 | config ARM_ERRATA_411920 |
| 1104 | bool "ARM errata: Invalidation of the Instruction Cache operation can fail" |
| 1105 | depends on CPU_V6 || CPU_V6K |
| 1106 | help |
| 1107 | Invalidation of the Instruction Cache operation can |
| 1108 | fail. This erratum is present in 1136 (before r1p4), 1156 and 1176. |
| 1109 | It does not affect the MPCore. This option enables the ARM Ltd. |
| 1110 | recommended workaround. |
| 1111 | |
| 1112 | config ARM_ERRATA_430973 |
| 1113 | bool "ARM errata: Stale prediction on replaced interworking branch" |
| 1114 | depends on CPU_V7 |
| 1115 | help |
| 1116 | This option enables the workaround for the 430973 Cortex-A8 |
| 1117 | (r1p0..r1p2) erratum. If a code sequence containing an ARM/Thumb |
| 1118 | interworking branch is replaced with another code sequence at the |
| 1119 | same virtual address, whether due to self-modifying code or virtual |
| 1120 | to physical address re-mapping, Cortex-A8 does not recover from the |
| 1121 | stale interworking branch prediction. This results in Cortex-A8 |
| 1122 | executing the new code sequence in the incorrect ARM or Thumb state. |
| 1123 | The workaround enables the BTB/BTAC operations by setting ACTLR.IBE |
| 1124 | and also flushes the branch target cache at every context switch. |
| 1125 | Note that setting specific bits in the ACTLR register may not be |
| 1126 | available in non-secure mode. |
| 1127 | |
| 1128 | config ARM_ERRATA_458693 |
| 1129 | bool "ARM errata: Processor deadlock when a false hazard is created" |
| 1130 | depends on CPU_V7 |
| 1131 | depends on !ARCH_MULTIPLATFORM |
| 1132 | help |
| 1133 | This option enables the workaround for the 458693 Cortex-A8 (r2p0) |
| 1134 | erratum. For very specific sequences of memory operations, it is |
| 1135 | possible for a hazard condition intended for a cache line to instead |
| 1136 | be incorrectly associated with a different cache line. This false |
| 1137 | hazard might then cause a processor deadlock. The workaround enables |
| 1138 | the L1 caching of the NEON accesses and disables the PLD instruction |
| 1139 | in the ACTLR register. Note that setting specific bits in the ACTLR |
| 1140 | register may not be available in non-secure mode. |
| 1141 | |
| 1142 | config ARM_ERRATA_460075 |
| 1143 | bool "ARM errata: Data written to the L2 cache can be overwritten with stale data" |
| 1144 | depends on CPU_V7 |
| 1145 | depends on !ARCH_MULTIPLATFORM |
| 1146 | help |
| 1147 | This option enables the workaround for the 460075 Cortex-A8 (r2p0) |
| 1148 | erratum. Any asynchronous access to the L2 cache may encounter a |
| 1149 | situation in which recent store transactions to the L2 cache are lost |
| 1150 | and overwritten with stale memory contents from external memory. The |
| 1151 | workaround disables the write-allocate mode for the L2 cache via the |
| 1152 | ACTLR register. Note that setting specific bits in the ACTLR register |
| 1153 | may not be available in non-secure mode. |
| 1154 | |
| 1155 | config ARM_ERRATA_742230 |
| 1156 | bool "ARM errata: DMB operation may be faulty" |
| 1157 | depends on CPU_V7 && SMP |
| 1158 | depends on !ARCH_MULTIPLATFORM |
| 1159 | help |
| 1160 | This option enables the workaround for the 742230 Cortex-A9 |
| 1161 | (r1p0..r2p2) erratum. Under rare circumstances, a DMB instruction |
| 1162 | between two write operations may not ensure the correct visibility |
| 1163 | ordering of the two writes. This workaround sets a specific bit in |
| 1164 | the diagnostic register of the Cortex-A9 which causes the DMB |
| 1165 | instruction to behave as a DSB, ensuring the correct behaviour of |
| 1166 | the two writes. |
| 1167 | |
| 1168 | config ARM_ERRATA_742231 |
| 1169 | bool "ARM errata: Incorrect hazard handling in the SCU may lead to data corruption" |
| 1170 | depends on CPU_V7 && SMP |
| 1171 | depends on !ARCH_MULTIPLATFORM |
| 1172 | help |
| 1173 | This option enables the workaround for the 742231 Cortex-A9 |
| 1174 | (r2p0..r2p2) erratum. Under certain conditions, specific to the |
| 1175 | Cortex-A9 MPCore micro-architecture, two CPUs working in SMP mode, |
| 1176 | accessing some data located in the same cache line, may get corrupted |
| 1177 | data due to bad handling of the address hazard when the line gets |
| 1178 | replaced from one of the CPUs at the same time as another CPU is |
| 1179 | accessing it. This workaround sets specific bits in the diagnostic |
| 1180 | register of the Cortex-A9 which reduces the linefill issuing |
| 1181 | capabilities of the processor. |
| 1182 | |
| 1183 | config PL310_ERRATA_588369 |
| 1184 | bool "PL310 errata: Clean & Invalidate maintenance operations do not invalidate clean lines" |
| 1185 | depends on CACHE_L2X0 |
| 1186 | help |
| 1187 | The PL310 L2 cache controller implements three types of Clean & |
| 1188 | Invalidate maintenance operations: by Physical Address |
| 1189 | (offset 0x7F0), by Index/Way (0x7F8) and by Way (0x7FC). |
| 1190 | They are architecturally defined to behave as the execution of a |
| 1191 | clean operation followed immediately by an invalidate operation, |
| 1192 | both performing to the same memory location. This functionality |
| 1193 | is not correctly implemented in PL310 as clean lines are not |
| 1194 | invalidated as a result of these operations. |
| 1195 | |
| 1196 | config ARM_ERRATA_643719 |
| 1197 | bool "ARM errata: LoUIS bit field in CLIDR register is incorrect" |
| 1198 | depends on CPU_V7 && SMP |
| 1199 | help |
| 1200 | This option enables the workaround for the 643719 Cortex-A9 (prior to |
| 1201 | r1p0) erratum. On affected cores the LoUIS bit field of the CLIDR |
| 1202 | register returns zero when it should return one. The workaround |
| 1203 | corrects this value, ensuring cache maintenance operations which use |
| 1204 | it behave as intended and avoiding data corruption. |
| 1205 | |
| 1206 | config ARM_ERRATA_720789 |
| 1207 | bool "ARM errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID" |
| 1208 | depends on CPU_V7 |
| 1209 | help |
| 1210 | This option enables the workaround for the 720789 Cortex-A9 (prior to |
| 1211 | r2p0) erratum. A faulty ASID can be sent to the other CPUs for the |
| 1212 | broadcasted CP15 TLB maintenance operations TLBIASIDIS and TLBIMVAIS. |
| 1213 | As a consequence of this erratum, some TLB entries which should be |
| 1214 | invalidated are not, resulting in an incoherency in the system page |
| 1215 | tables. The workaround changes the TLB flushing routines to invalidate |
| 1216 | entries regardless of the ASID. |
| 1217 | |
| 1218 | config PL310_ERRATA_727915 |
| 1219 | bool "PL310 errata: Background Clean & Invalidate by Way operation can cause data corruption" |
| 1220 | depends on CACHE_L2X0 |
| 1221 | help |
| 1222 | PL310 implements the Clean & Invalidate by Way L2 cache maintenance |
| 1223 | operation (offset 0x7FC). This operation runs in background so that |
| 1224 | PL310 can handle normal accesses while it is in progress. Under very |
| 1225 | rare circumstances, due to this erratum, write data can be lost when |
| 1226 | PL310 treats a cacheable write transaction during a Clean & |
| 1227 | Invalidate by Way operation. |
| 1228 | |
| 1229 | config ARM_ERRATA_743622 |
| 1230 | bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption" |
| 1231 | depends on CPU_V7 |
| 1232 | depends on !ARCH_MULTIPLATFORM |
| 1233 | help |
| 1234 | This option enables the workaround for the 743622 Cortex-A9 |
| 1235 | (r2p*) erratum. Under very rare conditions, a faulty |
| 1236 | optimisation in the Cortex-A9 Store Buffer may lead to data |
| 1237 | corruption. This workaround sets a specific bit in the diagnostic |
| 1238 | register of the Cortex-A9 which disables the Store Buffer |
| 1239 | optimisation, preventing the defect from occurring. This has no |
| 1240 | visible impact on the overall performance or power consumption of the |
| 1241 | processor. |
| 1242 | |
| 1243 | config ARM_ERRATA_751472 |
| 1244 | bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation" |
| 1245 | depends on CPU_V7 |
| 1246 | depends on !ARCH_MULTIPLATFORM |
| 1247 | help |
| 1248 | This option enables the workaround for the 751472 Cortex-A9 (prior |
| 1249 | to r3p0) erratum. An interrupted ICIALLUIS operation may prevent the |
| 1250 | completion of a following broadcasted operation if the second |
| 1251 | operation is received by a CPU before the ICIALLUIS has completed, |
| 1252 | potentially leading to corrupted entries in the cache or TLB. |
| 1253 | |
| 1254 | config PL310_ERRATA_753970 |
| 1255 | bool "PL310 errata: cache sync operation may be faulty" |
| 1256 | depends on CACHE_PL310 |
| 1257 | help |
| 1258 | This option enables the workaround for the 753970 PL310 (r3p0) erratum. |
| 1259 | |
| 1260 | Under some condition the effect of cache sync operation on |
| 1261 | the store buffer still remains when the operation completes. |
| 1262 | This means that the store buffer is always asked to drain and |
| 1263 | this prevents it from merging any further writes. The workaround |
| 1264 | is to replace the normal offset of cache sync operation (0x730) |
| 1265 | by another offset targeting an unmapped PL310 register 0x740. |
| 1266 | This has the same effect as the cache sync operation: store buffer |
| 1267 | drain and waiting for all buffers empty. |
| 1268 | |
| 1269 | config ARM_ERRATA_754322 |
| 1270 | bool "ARM errata: possible faulty MMU translations following an ASID switch" |
| 1271 | depends on CPU_V7 |
| 1272 | help |
| 1273 | This option enables the workaround for the 754322 Cortex-A9 (r2p*, |
| 1274 | r3p*) erratum. A speculative memory access may cause a page table walk |
| 1275 | which starts prior to an ASID switch but completes afterwards. This |
| 1276 | can populate the micro-TLB with a stale entry which may be hit with |
| 1277 | the new ASID. This workaround places two dsb instructions in the mm |
| 1278 | switching code so that no page table walks can cross the ASID switch. |
| 1279 | |
| 1280 | config ARM_ERRATA_754327 |
| 1281 | bool "ARM errata: no automatic Store Buffer drain" |
| 1282 | depends on CPU_V7 && SMP |
| 1283 | help |
| 1284 | This option enables the workaround for the 754327 Cortex-A9 (prior to |
| 1285 | r2p0) erratum. The Store Buffer does not have any automatic draining |
| 1286 | mechanism and therefore a livelock may occur if an external agent |
| 1287 | continuously polls a memory location waiting to observe an update. |
| 1288 | This workaround defines cpu_relax() as smp_mb(), preventing correctly |
| 1289 | written polling loops from denying visibility of updates to memory. |
| 1290 | |
| 1291 | config ARM_ERRATA_364296 |
| 1292 | bool "ARM errata: Possible cache data corruption with hit-under-miss enabled" |
| 1293 | depends on CPU_V6 |
| 1294 | help |
| 1295 | This options enables the workaround for the 364296 ARM1136 |
| 1296 | r0p2 erratum (possible cache data corruption with |
| 1297 | hit-under-miss enabled). It sets the undocumented bit 31 in |
| 1298 | the auxiliary control register and the FI bit in the control |
| 1299 | register, thus disabling hit-under-miss without putting the |
| 1300 | processor into full low interrupt latency mode. ARM11MPCore |
| 1301 | is not affected. |
| 1302 | |
| 1303 | config ARM_ERRATA_764369 |
| 1304 | bool "ARM errata: Data cache line maintenance operation by MVA may not succeed" |
| 1305 | depends on CPU_V7 && SMP |
| 1306 | help |
| 1307 | This option enables the workaround for erratum 764369 |
| 1308 | affecting Cortex-A9 MPCore with two or more processors (all |
| 1309 | current revisions). Under certain timing circumstances, a data |
| 1310 | cache line maintenance operation by MVA targeting an Inner |
| 1311 | Shareable memory region may fail to proceed up to either the |
| 1312 | Point of Coherency or to the Point of Unification of the |
| 1313 | system. This workaround adds a DSB instruction before the |
| 1314 | relevant cache maintenance functions and sets a specific bit |
| 1315 | in the diagnostic control register of the SCU. |
| 1316 | |
| 1317 | config PL310_ERRATA_769419 |
| 1318 | bool "PL310 errata: no automatic Store Buffer drain" |
| 1319 | depends on CACHE_L2X0 |
| 1320 | help |
| 1321 | On revisions of the PL310 prior to r3p2, the Store Buffer does |
| 1322 | not automatically drain. This can cause normal, non-cacheable |
| 1323 | writes to be retained when the memory system is idle, leading |
| 1324 | to suboptimal I/O performance for drivers using coherent DMA. |
| 1325 | This option adds a write barrier to the cpu_idle loop so that, |
| 1326 | on systems with an outer cache, the store buffer is drained |
| 1327 | explicitly. |
| 1328 | |
| 1329 | config ARM_ERRATA_775420 |
| 1330 | bool "ARM errata: A data cache maintenance operation which aborts, might lead to deadlock" |
| 1331 | depends on CPU_V7 |
| 1332 | help |
| 1333 | This option enables the workaround for the 775420 Cortex-A9 (r2p2, |
| 1334 | r2p6,r2p8,r2p10,r3p0) erratum. In case a date cache maintenance |
| 1335 | operation aborts with MMU exception, it might cause the processor |
| 1336 | to deadlock. This workaround puts DSB before executing ISB if |
| 1337 | an abort may occur on cache maintenance. |
| 1338 | |
| 1339 | config ARM_ERRATA_798181 |
| 1340 | bool "ARM errata: TLBI/DSB failure on Cortex-A15" |
| 1341 | depends on CPU_V7 && SMP |
| 1342 | help |
| 1343 | On Cortex-A15 (r0p0..r3p2) the TLBI*IS/DSB operations are not |
| 1344 | adequately shooting down all use of the old entries. This |
| 1345 | option enables the Linux kernel workaround for this erratum |
| 1346 | which sends an IPI to the CPUs that are running the same ASID |
| 1347 | as the one being invalidated. |
| 1348 | |
| 1349 | config ARM_ERRATA_773022 |
| 1350 | bool "ARM errata: incorrect instructions may be executed from loop buffer" |
| 1351 | depends on CPU_V7 |
| 1352 | help |
| 1353 | This option enables the workaround for the 773022 Cortex-A15 |
| 1354 | (up to r0p4) erratum. In certain rare sequences of code, the |
| 1355 | loop buffer may deliver incorrect instructions. This |
| 1356 | workaround disables the loop buffer to avoid the erratum. |
| 1357 | |
| 1358 | endmenu |
| 1359 | |
| 1360 | source "arch/arm/common/Kconfig" |
| 1361 | |
| 1362 | menu "Bus support" |
| 1363 | |
| 1364 | config ARM_AMBA |
| 1365 | bool |
| 1366 | |
| 1367 | config ISA |
| 1368 | bool |
| 1369 | help |
| 1370 | Find out whether you have ISA slots on your motherboard. ISA is the |
| 1371 | name of a bus system, i.e. the way the CPU talks to the other stuff |
| 1372 | inside your box. Other bus systems are PCI, EISA, MicroChannel |
| 1373 | (MCA) or VESA. ISA is an older system, now being displaced by PCI; |
| 1374 | newer boards don't support it. If you have ISA, say Y, otherwise N. |
| 1375 | |
| 1376 | # Select ISA DMA controller support |
| 1377 | config ISA_DMA |
| 1378 | bool |
| 1379 | select ISA_DMA_API |
| 1380 | |
| 1381 | # Select ISA DMA interface |
| 1382 | config ISA_DMA_API |
| 1383 | bool |
| 1384 | |
| 1385 | config PCI |
| 1386 | bool "PCI support" if MIGHT_HAVE_PCI |
| 1387 | help |
| 1388 | Find out whether you have a PCI motherboard. PCI is the name of a |
| 1389 | bus system, i.e. the way the CPU talks to the other stuff inside |
| 1390 | your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or |
| 1391 | VESA. If you have PCI, say Y, otherwise N. |
| 1392 | |
| 1393 | config PCI_DOMAINS |
| 1394 | bool |
| 1395 | depends on PCI |
| 1396 | |
| 1397 | config PCI_NANOENGINE |
| 1398 | bool "BSE nanoEngine PCI support" |
| 1399 | depends on SA1100_NANOENGINE |
| 1400 | help |
| 1401 | Enable PCI on the BSE nanoEngine board. |
| 1402 | |
| 1403 | config PCI_SYSCALL |
| 1404 | def_bool PCI |
| 1405 | |
| 1406 | config PCI_HOST_ITE8152 |
| 1407 | bool |
| 1408 | depends on PCI && MACH_ARMCORE |
| 1409 | default y |
| 1410 | select DMABOUNCE |
| 1411 | |
| 1412 | source "drivers/pci/Kconfig" |
| 1413 | source "drivers/pci/pcie/Kconfig" |
| 1414 | |
| 1415 | source "drivers/pcmcia/Kconfig" |
| 1416 | |
| 1417 | endmenu |
| 1418 | |
| 1419 | menu "Kernel Features" |
| 1420 | |
| 1421 | config HAVE_SMP |
| 1422 | bool |
| 1423 | help |
| 1424 | This option should be selected by machines which have an SMP- |
| 1425 | capable CPU. |
| 1426 | |
| 1427 | The only effect of this option is to make the SMP-related |
| 1428 | options available to the user for configuration. |
| 1429 | |
| 1430 | config SMP |
| 1431 | bool "Symmetric Multi-Processing" |
| 1432 | depends on CPU_V6K || CPU_V7 |
| 1433 | depends on GENERIC_CLOCKEVENTS |
| 1434 | depends on HAVE_SMP |
| 1435 | depends on MMU || ARM_MPU |
| 1436 | help |
| 1437 | This enables support for systems with more than one CPU. If you have |
| 1438 | a system with only one CPU, like most personal computers, say N. If |
| 1439 | you have a system with more than one CPU, say Y. |
| 1440 | |
| 1441 | If you say N here, the kernel will run on single and multiprocessor |
| 1442 | machines, but will use only one CPU of a multiprocessor machine. If |
| 1443 | you say Y here, the kernel will run on many, but not all, single |
| 1444 | processor machines. On a single processor machine, the kernel will |
| 1445 | run faster if you say N here. |
| 1446 | |
| 1447 | See also <file:Documentation/x86/i386/IO-APIC.txt>, |
| 1448 | <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at |
| 1449 | <http://tldp.org/HOWTO/SMP-HOWTO.html>. |
| 1450 | |
| 1451 | If you don't know what to do here, say N. |
| 1452 | |
| 1453 | config SMP_ON_UP |
| 1454 | bool "Allow booting SMP kernel on uniprocessor systems (EXPERIMENTAL)" |
| 1455 | depends on SMP && !XIP_KERNEL && MMU |
| 1456 | default y |
| 1457 | help |
| 1458 | SMP kernels contain instructions which fail on non-SMP processors. |
| 1459 | Enabling this option allows the kernel to modify itself to make |
| 1460 | these instructions safe. Disabling it allows about 1K of space |
| 1461 | savings. |
| 1462 | |
| 1463 | If you don't know what to do here, say Y. |
| 1464 | |
| 1465 | config ARM_CPU_TOPOLOGY |
| 1466 | bool "Support cpu topology definition" |
| 1467 | depends on SMP && CPU_V7 |
| 1468 | default y |
| 1469 | help |
| 1470 | Support ARM cpu topology definition. The MPIDR register defines |
| 1471 | affinity between processors which is then used to describe the cpu |
| 1472 | topology of an ARM System. |
| 1473 | |
| 1474 | config SCHED_MC |
| 1475 | bool "Multi-core scheduler support" |
| 1476 | depends on ARM_CPU_TOPOLOGY |
| 1477 | help |
| 1478 | Multi-core scheduler support improves the CPU scheduler's decision |
| 1479 | making when dealing with multi-core CPU chips at a cost of slightly |
| 1480 | increased overhead in some places. If unsure say N here. |
| 1481 | |
| 1482 | config SCHED_SMT |
| 1483 | bool "SMT scheduler support" |
| 1484 | depends on ARM_CPU_TOPOLOGY |
| 1485 | help |
| 1486 | Improves the CPU scheduler's decision making when dealing with |
| 1487 | MultiThreading at a cost of slightly increased overhead in some |
| 1488 | places. If unsure say N here. |
| 1489 | |
| 1490 | config HAVE_ARM_SCU |
| 1491 | bool |
| 1492 | help |
| 1493 | This option enables support for the ARM system coherency unit |
| 1494 | |
| 1495 | config HAVE_ARM_ARCH_TIMER |
| 1496 | bool "Architected timer support" |
| 1497 | depends on CPU_V7 |
| 1498 | select ARM_ARCH_TIMER |
| 1499 | select GENERIC_CLOCKEVENTS |
| 1500 | help |
| 1501 | This option enables support for the ARM architected timer |
| 1502 | |
| 1503 | config HAVE_ARM_TWD |
| 1504 | bool |
| 1505 | depends on SMP |
| 1506 | select CLKSRC_OF if OF |
| 1507 | help |
| 1508 | This options enables support for the ARM timer and watchdog unit |
| 1509 | |
| 1510 | config MCPM |
| 1511 | bool "Multi-Cluster Power Management" |
| 1512 | depends on CPU_V7 && SMP |
| 1513 | help |
| 1514 | This option provides the common power management infrastructure |
| 1515 | for (multi-)cluster based systems, such as big.LITTLE based |
| 1516 | systems. |
| 1517 | |
| 1518 | config BIG_LITTLE |
| 1519 | bool "big.LITTLE support (Experimental)" |
| 1520 | depends on CPU_V7 && SMP |
| 1521 | select MCPM |
| 1522 | help |
| 1523 | This option enables support selections for the big.LITTLE |
| 1524 | system architecture. |
| 1525 | |
| 1526 | config BL_SWITCHER |
| 1527 | bool "big.LITTLE switcher support" |
| 1528 | depends on BIG_LITTLE && MCPM && HOTPLUG_CPU |
| 1529 | select CPU_PM |
| 1530 | select ARM_CPU_SUSPEND |
| 1531 | help |
| 1532 | The big.LITTLE "switcher" provides the core functionality to |
| 1533 | transparently handle transition between a cluster of A15's |
| 1534 | and a cluster of A7's in a big.LITTLE system. |
| 1535 | |
| 1536 | config BL_SWITCHER_DUMMY_IF |
| 1537 | tristate "Simple big.LITTLE switcher user interface" |
| 1538 | depends on BL_SWITCHER && DEBUG_KERNEL |
| 1539 | help |
| 1540 | This is a simple and dummy char dev interface to control |
| 1541 | the big.LITTLE switcher core code. It is meant for |
| 1542 | debugging purposes only. |
| 1543 | |
| 1544 | choice |
| 1545 | prompt "Memory split" |
| 1546 | default VMSPLIT_3G |
| 1547 | help |
| 1548 | Select the desired split between kernel and user memory. |
| 1549 | |
| 1550 | If you are not absolutely sure what you are doing, leave this |
| 1551 | option alone! |
| 1552 | |
| 1553 | config VMSPLIT_3G |
| 1554 | bool "3G/1G user/kernel split" |
| 1555 | config VMSPLIT_2G |
| 1556 | bool "2G/2G user/kernel split" |
| 1557 | config VMSPLIT_1G |
| 1558 | bool "1G/3G user/kernel split" |
| 1559 | endchoice |
| 1560 | |
| 1561 | config PAGE_OFFSET |
| 1562 | hex |
| 1563 | default 0x40000000 if VMSPLIT_1G |
| 1564 | default 0x80000000 if VMSPLIT_2G |
| 1565 | default 0xC0000000 |
| 1566 | |
| 1567 | config NR_CPUS |
| 1568 | int "Maximum number of CPUs (2-32)" |
| 1569 | range 2 32 |
| 1570 | depends on SMP |
| 1571 | default "4" |
| 1572 | |
| 1573 | config HOTPLUG_CPU |
| 1574 | bool "Support for hot-pluggable CPUs" |
| 1575 | depends on SMP |
| 1576 | help |
| 1577 | Say Y here to experiment with turning CPUs off and on. CPUs |
| 1578 | can be controlled through /sys/devices/system/cpu. |
| 1579 | |
| 1580 | config ARM_PSCI |
| 1581 | bool "Support for the ARM Power State Coordination Interface (PSCI)" |
| 1582 | depends on CPU_V7 |
| 1583 | help |
| 1584 | Say Y here if you want Linux to communicate with system firmware |
| 1585 | implementing the PSCI specification for CPU-centric power |
| 1586 | management operations described in ARM document number ARM DEN |
| 1587 | 0022A ("Power State Coordination Interface System Software on |
| 1588 | ARM processors"). |
| 1589 | |
| 1590 | # The GPIO number here must be sorted by descending number. In case of |
| 1591 | # a multiplatform kernel, we just want the highest value required by the |
| 1592 | # selected platforms. |
| 1593 | config ARCH_NR_GPIO |
| 1594 | int |
| 1595 | default 1024 if ARCH_SHMOBILE || ARCH_TEGRA |
| 1596 | default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || SOC_DRA7XX |
| 1597 | default 392 if ARCH_U8500 |
| 1598 | default 352 if ARCH_VT8500 |
| 1599 | default 288 if ARCH_SUNXI |
| 1600 | default 264 if MACH_H4700 |
| 1601 | default 0 |
| 1602 | help |
| 1603 | Maximum number of GPIOs in the system. |
| 1604 | |
| 1605 | If unsure, leave the default value. |
| 1606 | |
| 1607 | source kernel/Kconfig.preempt |
| 1608 | |
| 1609 | config HZ_FIXED |
| 1610 | int |
| 1611 | default 200 if ARCH_EBSA110 || ARCH_S3C24XX || ARCH_S5P64X0 || \ |
| 1612 | ARCH_S5PV210 || ARCH_EXYNOS4 |
| 1613 | default AT91_TIMER_HZ if ARCH_AT91 |
| 1614 | default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE |
| 1615 | default 0 |
| 1616 | |
| 1617 | choice |
| 1618 | depends on HZ_FIXED = 0 |
| 1619 | prompt "Timer frequency" |
| 1620 | |
| 1621 | config HZ_100 |
| 1622 | bool "100 Hz" |
| 1623 | |
| 1624 | config HZ_200 |
| 1625 | bool "200 Hz" |
| 1626 | |
| 1627 | config HZ_250 |
| 1628 | bool "250 Hz" |
| 1629 | |
| 1630 | config HZ_300 |
| 1631 | bool "300 Hz" |
| 1632 | |
| 1633 | config HZ_500 |
| 1634 | bool "500 Hz" |
| 1635 | |
| 1636 | config HZ_1000 |
| 1637 | bool "1000 Hz" |
| 1638 | |
| 1639 | endchoice |
| 1640 | |
| 1641 | config HZ |
| 1642 | int |
| 1643 | default HZ_FIXED if HZ_FIXED != 0 |
| 1644 | default 100 if HZ_100 |
| 1645 | default 200 if HZ_200 |
| 1646 | default 250 if HZ_250 |
| 1647 | default 300 if HZ_300 |
| 1648 | default 500 if HZ_500 |
| 1649 | default 1000 |
| 1650 | |
| 1651 | config SCHED_HRTICK |
| 1652 | def_bool HIGH_RES_TIMERS |
| 1653 | |
| 1654 | config SCHED_HRTICK |
| 1655 | def_bool HIGH_RES_TIMERS |
| 1656 | |
| 1657 | config THUMB2_KERNEL |
| 1658 | bool "Compile the kernel in Thumb-2 mode" if !CPU_THUMBONLY |
| 1659 | depends on (CPU_V7 || CPU_V7M) && !CPU_V6 && !CPU_V6K |
| 1660 | default y if CPU_THUMBONLY |
| 1661 | select AEABI |
| 1662 | select ARM_ASM_UNIFIED |
| 1663 | select ARM_UNWIND |
| 1664 | help |
| 1665 | By enabling this option, the kernel will be compiled in |
| 1666 | Thumb-2 mode. A compiler/assembler that understand the unified |
| 1667 | ARM-Thumb syntax is needed. |
| 1668 | |
| 1669 | If unsure, say N. |
| 1670 | |
| 1671 | config THUMB2_AVOID_R_ARM_THM_JUMP11 |
| 1672 | bool "Work around buggy Thumb-2 short branch relocations in gas" |
| 1673 | depends on THUMB2_KERNEL && MODULES |
| 1674 | default y |
| 1675 | help |
| 1676 | Various binutils versions can resolve Thumb-2 branches to |
| 1677 | locally-defined, preemptible global symbols as short-range "b.n" |
| 1678 | branch instructions. |
| 1679 | |
| 1680 | This is a problem, because there's no guarantee the final |
| 1681 | destination of the symbol, or any candidate locations for a |
| 1682 | trampoline, are within range of the branch. For this reason, the |
| 1683 | kernel does not support fixing up the R_ARM_THM_JUMP11 (102) |
| 1684 | relocation in modules at all, and it makes little sense to add |
| 1685 | support. |
| 1686 | |
| 1687 | The symptom is that the kernel fails with an "unsupported |
| 1688 | relocation" error when loading some modules. |
| 1689 | |
| 1690 | Until fixed tools are available, passing |
| 1691 | -fno-optimize-sibling-calls to gcc should prevent gcc generating |
| 1692 | code which hits this problem, at the cost of a bit of extra runtime |
| 1693 | stack usage in some cases. |
| 1694 | |
| 1695 | The problem is described in more detail at: |
| 1696 | https://bugs.launchpad.net/binutils-linaro/+bug/725126 |
| 1697 | |
| 1698 | Only Thumb-2 kernels are affected. |
| 1699 | |
| 1700 | Unless you are sure your tools don't have this problem, say Y. |
| 1701 | |
| 1702 | config ARM_ASM_UNIFIED |
| 1703 | bool |
| 1704 | |
| 1705 | config AEABI |
| 1706 | bool "Use the ARM EABI to compile the kernel" |
| 1707 | help |
| 1708 | This option allows for the kernel to be compiled using the latest |
| 1709 | ARM ABI (aka EABI). This is only useful if you are using a user |
| 1710 | space environment that is also compiled with EABI. |
| 1711 | |
| 1712 | Since there are major incompatibilities between the legacy ABI and |
| 1713 | EABI, especially with regard to structure member alignment, this |
| 1714 | option also changes the kernel syscall calling convention to |
| 1715 | disambiguate both ABIs and allow for backward compatibility support |
| 1716 | (selected with CONFIG_OABI_COMPAT). |
| 1717 | |
| 1718 | To use this you need GCC version 4.0.0 or later. |
| 1719 | |
| 1720 | config OABI_COMPAT |
| 1721 | bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)" |
| 1722 | depends on AEABI && !THUMB2_KERNEL |
| 1723 | help |
| 1724 | This option preserves the old syscall interface along with the |
| 1725 | new (ARM EABI) one. It also provides a compatibility layer to |
| 1726 | intercept syscalls that have structure arguments which layout |
| 1727 | in memory differs between the legacy ABI and the new ARM EABI |
| 1728 | (only for non "thumb" binaries). This option adds a tiny |
| 1729 | overhead to all syscalls and produces a slightly larger kernel. |
| 1730 | |
| 1731 | The seccomp filter system will not be available when this is |
| 1732 | selected, since there is no way yet to sensibly distinguish |
| 1733 | between calling conventions during filtering. |
| 1734 | |
| 1735 | If you know you'll be using only pure EABI user space then you |
| 1736 | can say N here. If this option is not selected and you attempt |
| 1737 | to execute a legacy ABI binary then the result will be |
| 1738 | UNPREDICTABLE (in fact it can be predicted that it won't work |
| 1739 | at all). If in doubt say N. |
| 1740 | |
| 1741 | config ARCH_HAS_HOLES_MEMORYMODEL |
| 1742 | bool |
| 1743 | |
| 1744 | config ARCH_SPARSEMEM_ENABLE |
| 1745 | bool |
| 1746 | |
| 1747 | config ARCH_SPARSEMEM_DEFAULT |
| 1748 | def_bool ARCH_SPARSEMEM_ENABLE |
| 1749 | |
| 1750 | config ARCH_SELECT_MEMORY_MODEL |
| 1751 | def_bool ARCH_SPARSEMEM_ENABLE |
| 1752 | |
| 1753 | config HAVE_ARCH_PFN_VALID |
| 1754 | def_bool ARCH_HAS_HOLES_MEMORYMODEL || !SPARSEMEM |
| 1755 | |
| 1756 | config HIGHMEM |
| 1757 | bool "High Memory Support" |
| 1758 | depends on MMU |
| 1759 | help |
| 1760 | The address space of ARM processors is only 4 Gigabytes large |
| 1761 | and it has to accommodate user address space, kernel address |
| 1762 | space as well as some memory mapped IO. That means that, if you |
| 1763 | have a large amount of physical memory and/or IO, not all of the |
| 1764 | memory can be "permanently mapped" by the kernel. The physical |
| 1765 | memory that is not permanently mapped is called "high memory". |
| 1766 | |
| 1767 | Depending on the selected kernel/user memory split, minimum |
| 1768 | vmalloc space and actual amount of RAM, you may not need this |
| 1769 | option which should result in a slightly faster kernel. |
| 1770 | |
| 1771 | If unsure, say n. |
| 1772 | |
| 1773 | config HIGHPTE |
| 1774 | bool "Allocate 2nd-level pagetables from highmem" |
| 1775 | depends on HIGHMEM |
| 1776 | |
| 1777 | config HW_PERF_EVENTS |
| 1778 | bool "Enable hardware performance counter support for perf events" |
| 1779 | depends on PERF_EVENTS |
| 1780 | default y |
| 1781 | help |
| 1782 | Enable hardware performance counter support for perf events. If |
| 1783 | disabled, perf events will use software events only. |
| 1784 | |
| 1785 | config SYS_SUPPORTS_HUGETLBFS |
| 1786 | def_bool y |
| 1787 | depends on ARM_LPAE |
| 1788 | |
| 1789 | config HAVE_ARCH_TRANSPARENT_HUGEPAGE |
| 1790 | def_bool y |
| 1791 | depends on ARM_LPAE |
| 1792 | |
| 1793 | config ARCH_WANT_GENERAL_HUGETLB |
| 1794 | def_bool y |
| 1795 | |
| 1796 | source "mm/Kconfig" |
| 1797 | |
| 1798 | config FORCE_MAX_ZONEORDER |
| 1799 | int "Maximum zone order" if ARCH_SHMOBILE |
| 1800 | range 11 64 if ARCH_SHMOBILE |
| 1801 | default "12" if SOC_AM33XX |
| 1802 | default "9" if SA1111 |
| 1803 | default "11" |
| 1804 | help |
| 1805 | The kernel memory allocator divides physically contiguous memory |
| 1806 | blocks into "zones", where each zone is a power of two number of |
| 1807 | pages. This option selects the largest power of two that the kernel |
| 1808 | keeps in the memory allocator. If you need to allocate very large |
| 1809 | blocks of physically contiguous memory, then you may need to |
| 1810 | increase this value. |
| 1811 | |
| 1812 | This config option is actually maximum order plus one. For example, |
| 1813 | a value of 11 means that the largest free memory block is 2^10 pages. |
| 1814 | |
| 1815 | config ALIGNMENT_TRAP |
| 1816 | bool |
| 1817 | depends on CPU_CP15_MMU |
| 1818 | default y if !ARCH_EBSA110 |
| 1819 | select HAVE_PROC_CPU if PROC_FS |
| 1820 | help |
| 1821 | ARM processors cannot fetch/store information which is not |
| 1822 | naturally aligned on the bus, i.e., a 4 byte fetch must start at an |
| 1823 | address divisible by 4. On 32-bit ARM processors, these non-aligned |
| 1824 | fetch/store instructions will be emulated in software if you say |
| 1825 | here, which has a severe performance impact. This is necessary for |
| 1826 | correct operation of some network protocols. With an IP-only |
| 1827 | configuration it is safe to say N, otherwise say Y. |
| 1828 | |
| 1829 | config UACCESS_WITH_MEMCPY |
| 1830 | bool "Use kernel mem{cpy,set}() for {copy_to,clear}_user()" |
| 1831 | depends on MMU |
| 1832 | default y if CPU_FEROCEON |
| 1833 | help |
| 1834 | Implement faster copy_to_user and clear_user methods for CPU |
| 1835 | cores where a 8-word STM instruction give significantly higher |
| 1836 | memory write throughput than a sequence of individual 32bit stores. |
| 1837 | |
| 1838 | A possible side effect is a slight increase in scheduling latency |
| 1839 | between threads sharing the same address space if they invoke |
| 1840 | such copy operations with large buffers. |
| 1841 | |
| 1842 | However, if the CPU data cache is using a write-allocate mode, |
| 1843 | this option is unlikely to provide any performance gain. |
| 1844 | |
| 1845 | config SECCOMP |
| 1846 | bool |
| 1847 | prompt "Enable seccomp to safely compute untrusted bytecode" |
| 1848 | ---help--- |
| 1849 | This kernel feature is useful for number crunching applications |
| 1850 | that may need to compute untrusted bytecode during their |
| 1851 | execution. By using pipes or other transports made available to |
| 1852 | the process as file descriptors supporting the read/write |
| 1853 | syscalls, it's possible to isolate those applications in |
| 1854 | their own address space using seccomp. Once seccomp is |
| 1855 | enabled via prctl(PR_SET_SECCOMP), it cannot be disabled |
| 1856 | and the task is only allowed to execute a few safe syscalls |
| 1857 | defined by each seccomp mode. |
| 1858 | |
| 1859 | config CC_STACKPROTECTOR |
| 1860 | bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)" |
| 1861 | help |
| 1862 | This option turns on the -fstack-protector GCC feature. This |
| 1863 | feature puts, at the beginning of functions, a canary value on |
| 1864 | the stack just before the return address, and validates |
| 1865 | the value just before actually returning. Stack based buffer |
| 1866 | overflows (that need to overwrite this return address) now also |
| 1867 | overwrite the canary, which gets detected and the attack is then |
| 1868 | neutralized via a kernel panic. |
| 1869 | This feature requires gcc version 4.2 or above. |
| 1870 | |
| 1871 | config SWIOTLB |
| 1872 | def_bool y |
| 1873 | |
| 1874 | config IOMMU_HELPER |
| 1875 | def_bool SWIOTLB |
| 1876 | |
| 1877 | config XEN_DOM0 |
| 1878 | def_bool y |
| 1879 | depends on XEN |
| 1880 | |
| 1881 | config XEN |
| 1882 | bool "Xen guest support on ARM (EXPERIMENTAL)" |
| 1883 | depends on ARM && AEABI && OF |
| 1884 | depends on CPU_V7 && !CPU_V6 |
| 1885 | depends on !GENERIC_ATOMIC64 |
| 1886 | select ARM_PSCI |
| 1887 | select SWIOTLB_XEN |
| 1888 | help |
| 1889 | Say Y if you want to run Linux in a Virtual Machine on Xen on ARM. |
| 1890 | |
| 1891 | endmenu |
| 1892 | |
| 1893 | menu "Boot options" |
| 1894 | |
| 1895 | config USE_OF |
| 1896 | bool "Flattened Device Tree support" |
| 1897 | select IRQ_DOMAIN |
| 1898 | select OF |
| 1899 | select OF_EARLY_FLATTREE |
| 1900 | help |
| 1901 | Include support for flattened device tree machine descriptions. |
| 1902 | |
| 1903 | config ATAGS |
| 1904 | bool "Support for the traditional ATAGS boot data passing" if USE_OF |
| 1905 | default y |
| 1906 | help |
| 1907 | This is the traditional way of passing data to the kernel at boot |
| 1908 | time. If you are solely relying on the flattened device tree (or |
| 1909 | the ARM_ATAG_DTB_COMPAT option) then you may unselect this option |
| 1910 | to remove ATAGS support from your kernel binary. If unsure, |
| 1911 | leave this to y. |
| 1912 | |
| 1913 | config DEPRECATED_PARAM_STRUCT |
| 1914 | bool "Provide old way to pass kernel parameters" |
| 1915 | depends on ATAGS |
| 1916 | help |
| 1917 | This was deprecated in 2001 and announced to live on for 5 years. |
| 1918 | Some old boot loaders still use this way. |
| 1919 | |
| 1920 | # Compressed boot loader in ROM. Yes, we really want to ask about |
| 1921 | # TEXT and BSS so we preserve their values in the config files. |
| 1922 | config ZBOOT_ROM_TEXT |
| 1923 | hex "Compressed ROM boot loader base address" |
| 1924 | default "0" |
| 1925 | help |
| 1926 | The physical address at which the ROM-able zImage is to be |
| 1927 | placed in the target. Platforms which normally make use of |
| 1928 | ROM-able zImage formats normally set this to a suitable |
| 1929 | value in their defconfig file. |
| 1930 | |
| 1931 | If ZBOOT_ROM is not enabled, this has no effect. |
| 1932 | |
| 1933 | config ZBOOT_ROM_BSS |
| 1934 | hex "Compressed ROM boot loader BSS address" |
| 1935 | default "0" |
| 1936 | help |
| 1937 | The base address of an area of read/write memory in the target |
| 1938 | for the ROM-able zImage which must be available while the |
| 1939 | decompressor is running. It must be large enough to hold the |
| 1940 | entire decompressed kernel plus an additional 128 KiB. |
| 1941 | Platforms which normally make use of ROM-able zImage formats |
| 1942 | normally set this to a suitable value in their defconfig file. |
| 1943 | |
| 1944 | If ZBOOT_ROM is not enabled, this has no effect. |
| 1945 | |
| 1946 | config ZBOOT_ROM |
| 1947 | bool "Compressed boot loader in ROM/flash" |
| 1948 | depends on ZBOOT_ROM_TEXT != ZBOOT_ROM_BSS |
| 1949 | help |
| 1950 | Say Y here if you intend to execute your compressed kernel image |
| 1951 | (zImage) directly from ROM or flash. If unsure, say N. |
| 1952 | |
| 1953 | choice |
| 1954 | prompt "Include SD/MMC loader in zImage (EXPERIMENTAL)" |
| 1955 | depends on ZBOOT_ROM && ARCH_SH7372 |
| 1956 | default ZBOOT_ROM_NONE |
| 1957 | help |
| 1958 | Include experimental SD/MMC loading code in the ROM-able zImage. |
| 1959 | With this enabled it is possible to write the ROM-able zImage |
| 1960 | kernel image to an MMC or SD card and boot the kernel straight |
| 1961 | from the reset vector. At reset the processor Mask ROM will load |
| 1962 | the first part of the ROM-able zImage which in turn loads the |
| 1963 | rest the kernel image to RAM. |
| 1964 | |
| 1965 | config ZBOOT_ROM_NONE |
| 1966 | bool "No SD/MMC loader in zImage (EXPERIMENTAL)" |
| 1967 | help |
| 1968 | Do not load image from SD or MMC |
| 1969 | |
| 1970 | config ZBOOT_ROM_MMCIF |
| 1971 | bool "Include MMCIF loader in zImage (EXPERIMENTAL)" |
| 1972 | help |
| 1973 | Load image from MMCIF hardware block. |
| 1974 | |
| 1975 | config ZBOOT_ROM_SH_MOBILE_SDHI |
| 1976 | bool "Include SuperH Mobile SDHI loader in zImage (EXPERIMENTAL)" |
| 1977 | help |
| 1978 | Load image from SDHI hardware block |
| 1979 | |
| 1980 | endchoice |
| 1981 | |
| 1982 | config ARM_APPENDED_DTB |
| 1983 | bool "Use appended device tree blob to zImage (EXPERIMENTAL)" |
| 1984 | depends on OF && !ZBOOT_ROM |
| 1985 | help |
| 1986 | With this option, the boot code will look for a device tree binary |
| 1987 | (DTB) appended to zImage |
| 1988 | (e.g. cat zImage <filename>.dtb > zImage_w_dtb). |
| 1989 | |
| 1990 | This is meant as a backward compatibility convenience for those |
| 1991 | systems with a bootloader that can't be upgraded to accommodate |
| 1992 | the documented boot protocol using a device tree. |
| 1993 | |
| 1994 | Beware that there is very little in terms of protection against |
| 1995 | this option being confused by leftover garbage in memory that might |
| 1996 | look like a DTB header after a reboot if no actual DTB is appended |
| 1997 | to zImage. Do not leave this option active in a production kernel |
| 1998 | if you don't intend to always append a DTB. Proper passing of the |
| 1999 | location into r2 of a bootloader provided DTB is always preferable |
| 2000 | to this option. |
| 2001 | |
| 2002 | config ARM_ATAG_DTB_COMPAT |
| 2003 | bool "Supplement the appended DTB with traditional ATAG information" |
| 2004 | depends on ARM_APPENDED_DTB |
| 2005 | help |
| 2006 | Some old bootloaders can't be updated to a DTB capable one, yet |
| 2007 | they provide ATAGs with memory configuration, the ramdisk address, |
| 2008 | the kernel cmdline string, etc. Such information is dynamically |
| 2009 | provided by the bootloader and can't always be stored in a static |
| 2010 | DTB. To allow a device tree enabled kernel to be used with such |
| 2011 | bootloaders, this option allows zImage to extract the information |
| 2012 | from the ATAG list and store it at run time into the appended DTB. |
| 2013 | |
| 2014 | choice |
| 2015 | prompt "Kernel command line type" if ARM_ATAG_DTB_COMPAT |
| 2016 | default ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER |
| 2017 | |
| 2018 | config ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER |
| 2019 | bool "Use bootloader kernel arguments if available" |
| 2020 | help |
| 2021 | Uses the command-line options passed by the boot loader instead of |
| 2022 | the device tree bootargs property. If the boot loader doesn't provide |
| 2023 | any, the device tree bootargs property will be used. |
| 2024 | |
| 2025 | config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND |
| 2026 | bool "Extend with bootloader kernel arguments" |
| 2027 | help |
| 2028 | The command-line arguments provided by the boot loader will be |
| 2029 | appended to the the device tree bootargs property. |
| 2030 | |
| 2031 | endchoice |
| 2032 | |
| 2033 | config CMDLINE |
| 2034 | string "Default kernel command string" |
| 2035 | default "" |
| 2036 | help |
| 2037 | On some architectures (EBSA110 and CATS), there is currently no way |
| 2038 | for the boot loader to pass arguments to the kernel. For these |
| 2039 | architectures, you should supply some command-line options at build |
| 2040 | time by entering them here. As a minimum, you should specify the |
| 2041 | memory size and the root device (e.g., mem=64M root=/dev/nfs). |
| 2042 | |
| 2043 | choice |
| 2044 | prompt "Kernel command line type" if CMDLINE != "" |
| 2045 | default CMDLINE_FROM_BOOTLOADER |
| 2046 | depends on ATAGS |
| 2047 | |
| 2048 | config CMDLINE_FROM_BOOTLOADER |
| 2049 | bool "Use bootloader kernel arguments if available" |
| 2050 | help |
| 2051 | Uses the command-line options passed by the boot loader. If |
| 2052 | the boot loader doesn't provide any, the default kernel command |
| 2053 | string provided in CMDLINE will be used. |
| 2054 | |
| 2055 | config CMDLINE_EXTEND |
| 2056 | bool "Extend bootloader kernel arguments" |
| 2057 | help |
| 2058 | The command-line arguments provided by the boot loader will be |
| 2059 | appended to the default kernel command string. |
| 2060 | |
| 2061 | config CMDLINE_FORCE |
| 2062 | bool "Always use the default kernel command string" |
| 2063 | help |
| 2064 | Always use the default kernel command string, even if the boot |
| 2065 | loader passes other arguments to the kernel. |
| 2066 | This is useful if you cannot or don't want to change the |
| 2067 | command-line options your boot loader passes to the kernel. |
| 2068 | endchoice |
| 2069 | |
| 2070 | config XIP_KERNEL |
| 2071 | bool "Kernel Execute-In-Place from ROM" |
| 2072 | depends on !ZBOOT_ROM && !ARM_LPAE && !ARCH_MULTIPLATFORM |
| 2073 | help |
| 2074 | Execute-In-Place allows the kernel to run from non-volatile storage |
| 2075 | directly addressable by the CPU, such as NOR flash. This saves RAM |
| 2076 | space since the text section of the kernel is not loaded from flash |
| 2077 | to RAM. Read-write sections, such as the data section and stack, |
| 2078 | are still copied to RAM. The XIP kernel is not compressed since |
| 2079 | it has to run directly from flash, so it will take more space to |
| 2080 | store it. The flash address used to link the kernel object files, |
| 2081 | and for storing it, is configuration dependent. Therefore, if you |
| 2082 | say Y here, you must know the proper physical address where to |
| 2083 | store the kernel image depending on your own flash memory usage. |
| 2084 | |
| 2085 | Also note that the make target becomes "make xipImage" rather than |
| 2086 | "make zImage" or "make Image". The final kernel binary to put in |
| 2087 | ROM memory will be arch/arm/boot/xipImage. |
| 2088 | |
| 2089 | If unsure, say N. |
| 2090 | |
| 2091 | config XIP_PHYS_ADDR |
| 2092 | hex "XIP Kernel Physical Location" |
| 2093 | depends on XIP_KERNEL |
| 2094 | default "0x00080000" |
| 2095 | help |
| 2096 | This is the physical address in your flash memory the kernel will |
| 2097 | be linked for and stored to. This address is dependent on your |
| 2098 | own flash usage. |
| 2099 | |
| 2100 | config KEXEC |
| 2101 | bool "Kexec system call (EXPERIMENTAL)" |
| 2102 | depends on (!SMP || PM_SLEEP_SMP) |
| 2103 | help |
| 2104 | kexec is a system call that implements the ability to shutdown your |
| 2105 | current kernel, and to start another kernel. It is like a reboot |
| 2106 | but it is independent of the system firmware. And like a reboot |
| 2107 | you can start any kernel with it, not just Linux. |
| 2108 | |
| 2109 | It is an ongoing process to be certain the hardware in a machine |
| 2110 | is properly shutdown, so do not be surprised if this code does not |
| 2111 | initially work for you. |
| 2112 | |
| 2113 | config ATAGS_PROC |
| 2114 | bool "Export atags in procfs" |
| 2115 | depends on ATAGS && KEXEC |
| 2116 | default y |
| 2117 | help |
| 2118 | Should the atags used to boot the kernel be exported in an "atags" |
| 2119 | file in procfs. Useful with kexec. |
| 2120 | |
| 2121 | config CRASH_DUMP |
| 2122 | bool "Build kdump crash kernel (EXPERIMENTAL)" |
| 2123 | help |
| 2124 | Generate crash dump after being started by kexec. This should |
| 2125 | be normally only set in special crash dump kernels which are |
| 2126 | loaded in the main kernel with kexec-tools into a specially |
| 2127 | reserved region and then later executed after a crash by |
| 2128 | kdump/kexec. The crash dump kernel must be compiled to a |
| 2129 | memory address not used by the main kernel |
| 2130 | |
| 2131 | For more details see Documentation/kdump/kdump.txt |
| 2132 | |
| 2133 | config AUTO_ZRELADDR |
| 2134 | bool "Auto calculation of the decompressed kernel image address" |
| 2135 | depends on !ZBOOT_ROM |
| 2136 | help |
| 2137 | ZRELADDR is the physical address where the decompressed kernel |
| 2138 | image will be placed. If AUTO_ZRELADDR is selected, the address |
| 2139 | will be determined at run-time by masking the current IP with |
| 2140 | 0xf8000000. This assumes the zImage being placed in the first 128MB |
| 2141 | from start of memory. |
| 2142 | |
| 2143 | endmenu |
| 2144 | |
| 2145 | menu "CPU Power Management" |
| 2146 | |
| 2147 | if ARCH_HAS_CPUFREQ |
| 2148 | source "drivers/cpufreq/Kconfig" |
| 2149 | endif |
| 2150 | |
| 2151 | source "drivers/cpuidle/Kconfig" |
| 2152 | |
| 2153 | endmenu |
| 2154 | |
| 2155 | menu "Floating point emulation" |
| 2156 | |
| 2157 | comment "At least one emulation must be selected" |
| 2158 | |
| 2159 | config FPE_NWFPE |
| 2160 | bool "NWFPE math emulation" |
| 2161 | depends on (!AEABI || OABI_COMPAT) && !THUMB2_KERNEL |
| 2162 | ---help--- |
| 2163 | Say Y to include the NWFPE floating point emulator in the kernel. |
| 2164 | This is necessary to run most binaries. Linux does not currently |
| 2165 | support floating point hardware so you need to say Y here even if |
| 2166 | your machine has an FPA or floating point co-processor podule. |
| 2167 | |
| 2168 | You may say N here if you are going to load the Acorn FPEmulator |
| 2169 | early in the bootup. |
| 2170 | |
| 2171 | config FPE_NWFPE_XP |
| 2172 | bool "Support extended precision" |
| 2173 | depends on FPE_NWFPE |
| 2174 | help |
| 2175 | Say Y to include 80-bit support in the kernel floating-point |
| 2176 | emulator. Otherwise, only 32 and 64-bit support is compiled in. |
| 2177 | Note that gcc does not generate 80-bit operations by default, |
| 2178 | so in most cases this option only enlarges the size of the |
| 2179 | floating point emulator without any good reason. |
| 2180 | |
| 2181 | You almost surely want to say N here. |
| 2182 | |
| 2183 | config FPE_FASTFPE |
| 2184 | bool "FastFPE math emulation (EXPERIMENTAL)" |
| 2185 | depends on (!AEABI || OABI_COMPAT) && !CPU_32v3 |
| 2186 | ---help--- |
| 2187 | Say Y here to include the FAST floating point emulator in the kernel. |
| 2188 | This is an experimental much faster emulator which now also has full |
| 2189 | precision for the mantissa. It does not support any exceptions. |
| 2190 | It is very simple, and approximately 3-6 times faster than NWFPE. |
| 2191 | |
| 2192 | It should be sufficient for most programs. It may be not suitable |
| 2193 | for scientific calculations, but you have to check this for yourself. |
| 2194 | If you do not feel you need a faster FP emulation you should better |
| 2195 | choose NWFPE. |
| 2196 | |
| 2197 | config VFP |
| 2198 | bool "VFP-format floating point maths" |
| 2199 | depends on CPU_V6 || CPU_V6K || CPU_ARM926T || CPU_V7 || CPU_FEROCEON |
| 2200 | help |
| 2201 | Say Y to include VFP support code in the kernel. This is needed |
| 2202 | if your hardware includes a VFP unit. |
| 2203 | |
| 2204 | Please see <file:Documentation/arm/VFP/release-notes.txt> for |
| 2205 | release notes and additional status information. |
| 2206 | |
| 2207 | Say N if your target does not have VFP hardware. |
| 2208 | |
| 2209 | config VFPv3 |
| 2210 | bool |
| 2211 | depends on VFP |
| 2212 | default y if CPU_V7 |
| 2213 | |
| 2214 | config NEON |
| 2215 | bool "Advanced SIMD (NEON) Extension support" |
| 2216 | depends on VFPv3 && CPU_V7 |
| 2217 | help |
| 2218 | Say Y to include support code for NEON, the ARMv7 Advanced SIMD |
| 2219 | Extension. |
| 2220 | |
| 2221 | config KERNEL_MODE_NEON |
| 2222 | bool "Support for NEON in kernel mode" |
| 2223 | depends on NEON && AEABI |
| 2224 | help |
| 2225 | Say Y to include support for NEON in kernel mode. |
| 2226 | |
| 2227 | endmenu |
| 2228 | |
| 2229 | menu "Userspace binary formats" |
| 2230 | |
| 2231 | source "fs/Kconfig.binfmt" |
| 2232 | |
| 2233 | config ARTHUR |
| 2234 | tristate "RISC OS personality" |
| 2235 | depends on !AEABI |
| 2236 | help |
| 2237 | Say Y here to include the kernel code necessary if you want to run |
| 2238 | Acorn RISC OS/Arthur binaries under Linux. This code is still very |
| 2239 | experimental; if this sounds frightening, say N and sleep in peace. |
| 2240 | You can also say M here to compile this support as a module (which |
| 2241 | will be called arthur). |
| 2242 | |
| 2243 | endmenu |
| 2244 | |
| 2245 | menu "Power management options" |
| 2246 | |
| 2247 | source "kernel/power/Kconfig" |
| 2248 | |
| 2249 | config ARCH_SUSPEND_POSSIBLE |
| 2250 | depends on !ARCH_S5PC100 |
| 2251 | depends on CPU_ARM920T || CPU_ARM926T || CPU_FEROCEON || CPU_SA1100 || \ |
| 2252 | CPU_V6 || CPU_V6K || CPU_V7 || CPU_XSC3 || CPU_XSCALE || CPU_MOHAWK |
| 2253 | def_bool y |
| 2254 | |
| 2255 | config ARM_CPU_SUSPEND |
| 2256 | def_bool PM_SLEEP |
| 2257 | |
| 2258 | endmenu |
| 2259 | |
| 2260 | source "net/Kconfig" |
| 2261 | |
| 2262 | source "drivers/Kconfig" |
| 2263 | |
| 2264 | source "fs/Kconfig" |
| 2265 | |
| 2266 | source "arch/arm/Kconfig.debug" |
| 2267 | |
| 2268 | source "security/Kconfig" |
| 2269 | |
| 2270 | source "crypto/Kconfig" |
| 2271 | |
| 2272 | source "lib/Kconfig" |
| 2273 | |
| 2274 | source "arch/arm/kvm/Kconfig" |