[deliverable/linux.git] / arch / arm / mach-omap2 / board-3430sdp.c

/*
 * linux/arch/arm/mach-omap2/board-3430sdp.c
 *
 * Copyright (C) 2007 Texas Instruments
 *
 * Modified from mach-omap2/board-generic.c
 *
 * Initial code: Syed Mohammed Khasim
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/input.h>
#include <linux/input/matrix_keypad.h>
#include <linux/spi/spi.h>
#include <linux/i2c/twl.h>
#include <linux/regulator/machine.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/mmc/host.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <linux/platform_data/omap-twl4030.h>
#include <linux/usb/phy.h>

#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>

#include "common.h"
#include <linux/omap-dma.h>
#include <video/omapdss.h>
#include <video/omap-panel-tfp410.h>

#include "gpmc.h"
#include "gpmc-smc91x.h"

#include "soc.h"
#include "board-flash.h"
#include "mux.h"
#include "sdram-qimonda-hyb18m512160af-6.h"
#include "hsmmc.h"
#include "pm.h"
#include "control.h"
#include "common-board-devices.h"

#define CONFIG_DISABLE_HFCLK 1

#define SDP3430_TS_GPIO_IRQ_SDPV1	3
#define SDP3430_TS_GPIO_IRQ_SDPV2	2

#define ENABLE_VAUX3_DEDICATED	0x03
#define ENABLE_VAUX3_DEV_GRP	0x20

#define TWL4030_MSECURE_GPIO 22

static uint32_t board_keymap[] = {
	KEY(0, 0, KEY_LEFT),
	KEY(0, 1, KEY_RIGHT),
	KEY(0, 2, KEY_A),
	KEY(0, 3, KEY_B),
	KEY(0, 4, KEY_C),
	KEY(1, 0, KEY_DOWN),
	KEY(1, 1, KEY_UP),
	KEY(1, 2, KEY_E),
	KEY(1, 3, KEY_F),
	KEY(1, 4, KEY_G),
	KEY(2, 0, KEY_ENTER),
	KEY(2, 1, KEY_I),
	KEY(2, 2, KEY_J),
	KEY(2, 3, KEY_K),
	KEY(2, 4, KEY_3),
	KEY(3, 0, KEY_M),
	KEY(3, 1, KEY_N),
	KEY(3, 2, KEY_O),
	KEY(3, 3, KEY_P),
	KEY(3, 4, KEY_Q),
	KEY(4, 0, KEY_R),
	KEY(4, 1, KEY_4),
	KEY(4, 2, KEY_T),
	KEY(4, 3, KEY_U),
	KEY(4, 4, KEY_D),
	KEY(5, 0, KEY_V),
	KEY(5, 1, KEY_W),
	KEY(5, 2, KEY_L),
	KEY(5, 3, KEY_S),
	KEY(5, 4, KEY_H),
	0
};

static struct matrix_keymap_data board_map_data = {
	.keymap			= board_keymap,
	.keymap_size		= ARRAY_SIZE(board_keymap),
};

static struct twl4030_keypad_data sdp3430_kp_data = {
	.keymap_data	= &board_map_data,
	.rows		= 5,
	.cols		= 6,
	.rep		= 1,
};

#define SDP3430_LCD_PANEL_BACKLIGHT_GPIO	8
#define SDP3430_LCD_PANEL_ENABLE_GPIO		5

static struct gpio sdp3430_dss_gpios[] __initdata = {
	{SDP3430_LCD_PANEL_ENABLE_GPIO,    GPIOF_OUT_INIT_LOW, "LCD reset"    },
	{SDP3430_LCD_PANEL_BACKLIGHT_GPIO, GPIOF_OUT_INIT_LOW, "LCD Backlight"},
};

static void __init sdp3430_display_init(void)
{
	int r;

	r = gpio_request_array(sdp3430_dss_gpios,
			       ARRAY_SIZE(sdp3430_dss_gpios));
	if (r)
		printk(KERN_ERR "failed to get LCD control GPIOs\n");

}

static int sdp3430_panel_enable_lcd(struct omap_dss_device *dssdev)
{
	gpio_direction_output(SDP3430_LCD_PANEL_ENABLE_GPIO, 1);
	gpio_direction_output(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, 1);

	return 0;
}

static void sdp3430_panel_disable_lcd(struct omap_dss_device *dssdev)
{
	gpio_direction_output(SDP3430_LCD_PANEL_ENABLE_GPIO, 0);
	gpio_direction_output(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, 0);
}

static int sdp3430_panel_enable_tv(struct omap_dss_device *dssdev)
{
	return 0;
}

static void sdp3430_panel_disable_tv(struct omap_dss_device *dssdev)
{
}


static struct omap_dss_device sdp3430_lcd_device = {
	.name			= "lcd",
	.driver_name		= "sharp_ls_panel",
	.type			= OMAP_DISPLAY_TYPE_DPI,
	.phy.dpi.data_lines	= 16,
	.platform_enable	= sdp3430_panel_enable_lcd,
	.platform_disable	= sdp3430_panel_disable_lcd,
};

static struct tfp410_platform_data dvi_panel = {
	.power_down_gpio	= -1,
	.i2c_bus_num		= -1,
};

static struct omap_dss_device sdp3430_dvi_device = {
	.name			= "dvi",
	.type			= OMAP_DISPLAY_TYPE_DPI,
	.driver_name		= "tfp410",
	.data			= &dvi_panel,
	.phy.dpi.data_lines	= 24,
};

static struct omap_dss_device sdp3430_tv_device = {
	.name			= "tv",
	.driver_name		= "venc",
	.type			= OMAP_DISPLAY_TYPE_VENC,
	.phy.venc.type		= OMAP_DSS_VENC_TYPE_SVIDEO,
	.platform_enable	= sdp3430_panel_enable_tv,
	.platform_disable	= sdp3430_panel_disable_tv,
};


static struct omap_dss_device *sdp3430_dss_devices[] = {
	&sdp3430_lcd_device,
	&sdp3430_dvi_device,
	&sdp3430_tv_device,
};

static struct omap_dss_board_info sdp3430_dss_data = {
	.num_devices	= ARRAY_SIZE(sdp3430_dss_devices),
	.devices	= sdp3430_dss_devices,
	.default_device	= &sdp3430_lcd_device,
};

static struct omap2_hsmmc_info mmc[] = {
	{
		.mmc		= 1,
		/* 8 bits (default) requires S6.3 == ON,
		 * so the SIM card isn't used; else 4 bits.
		 */
		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
		.gpio_wp	= 4,
		.deferred	= true,
	},
	{
		.mmc		= 2,
		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
		.gpio_wp	= 7,
		.deferred	= true,
	},
	{}	/* Terminator */
};

static struct omap_tw4030_pdata omap_twl4030_audio_data = {
	.voice_connected = true,
	.custom_routing	= true,

	.has_hs		= OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT,
	.has_hf		= OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT,

	.has_mainmic	= true,
	.has_submic	= true,
	.has_hsmic	= true,
	.has_linein	= OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT,
};

static int sdp3430_twl_gpio_setup(struct device *dev,
		unsigned gpio, unsigned ngpio)
{
	/* gpio + 0 is "mmc0_cd" (input/IRQ),
	 * gpio + 1 is "mmc1_cd" (input/IRQ)
	 */
	mmc[0].gpio_cd = gpio + 0;
	mmc[1].gpio_cd = gpio + 1;
	omap_hsmmc_late_init(mmc);

	/* gpio + 7 is "sub_lcd_en_bkl" (output/PWM1) */
	gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "sub_lcd_en_bkl");

	/* gpio + 15 is "sub_lcd_nRST" (output) */
	gpio_request_one(gpio + 15, GPIOF_OUT_INIT_LOW, "sub_lcd_nRST");

	omap_twl4030_audio_data.jack_detect = gpio + 2;
	omap_twl4030_audio_init("SDP3430", &omap_twl4030_audio_data);

	return 0;
}

static struct twl4030_gpio_platform_data sdp3430_gpio_data = {
	.pulldowns	= BIT(2) | BIT(6) | BIT(8) | BIT(13)
				| BIT(16) | BIT(17),
	.setup		= sdp3430_twl_gpio_setup,
};

/* regulator consumer mappings */

/* ads7846 on SPI */
static struct regulator_consumer_supply sdp3430_vaux3_supplies[] = {
	REGULATOR_SUPPLY("vcc", "spi1.0"),
};

static struct regulator_consumer_supply sdp3430_vmmc1_supplies[] = {
	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};

static struct regulator_consumer_supply sdp3430_vsim_supplies[] = {
	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
};

static struct regulator_consumer_supply sdp3430_vmmc2_supplies[] = {
	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
};

/*
 * Apply all the fixed voltages since most versions of U-Boot
 * don't bother with that initialization.
 */

/* VAUX1 for mainboard (irda and sub-lcd) */
static struct regulator_init_data sdp3430_vaux1 = {
	.constraints = {
		.min_uV			= 2800000,
		.max_uV			= 2800000,
		.apply_uV		= true,
		.valid_modes_mask	= REGULATOR_MODE_NORMAL
					| REGULATOR_MODE_STANDBY,
		.valid_ops_mask		= REGULATOR_CHANGE_MODE
					| REGULATOR_CHANGE_STATUS,
	},
};

/* VAUX2 for camera module */
static struct regulator_init_data sdp3430_vaux2 = {
	.constraints = {
		.min_uV			= 2800000,
		.max_uV			= 2800000,
		.apply_uV		= true,
		.valid_modes_mask	= REGULATOR_MODE_NORMAL
					| REGULATOR_MODE_STANDBY,
		.valid_ops_mask		= REGULATOR_CHANGE_MODE
					| REGULATOR_CHANGE_STATUS,
	},
};

/* VAUX3 for LCD board */
static struct regulator_init_data sdp3430_vaux3 = {
	.constraints = {
		.min_uV			= 2800000,
		.max_uV			= 2800000,
		.apply_uV		= true,
		.valid_modes_mask	= REGULATOR_MODE_NORMAL
					| REGULATOR_MODE_STANDBY,
		.valid_ops_mask		= REGULATOR_CHANGE_MODE
					| REGULATOR_CHANGE_STATUS,
	},
	.num_consumer_supplies		= ARRAY_SIZE(sdp3430_vaux3_supplies),
	.consumer_supplies		= sdp3430_vaux3_supplies,
};

/* VAUX4 for OMAP VDD_CSI2 (camera) */
static struct regulator_init_data sdp3430_vaux4 = {
	.constraints = {
		.min_uV			= 1800000,
		.max_uV			= 1800000,
		.apply_uV		= true,
		.valid_modes_mask	= REGULATOR_MODE_NORMAL
					| REGULATOR_MODE_STANDBY,
		.valid_ops_mask		= REGULATOR_CHANGE_MODE
					| REGULATOR_CHANGE_STATUS,
	},
};

/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
static struct regulator_init_data sdp3430_vmmc1 = {
	.constraints = {
		.min_uV			= 1850000,
		.max_uV			= 3150000,
		.valid_modes_mask	= REGULATOR_MODE_NORMAL
					| REGULATOR_MODE_STANDBY,
		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
					| REGULATOR_CHANGE_MODE
					| REGULATOR_CHANGE_STATUS,
	},
	.num_consumer_supplies	= ARRAY_SIZE(sdp3430_vmmc1_supplies),
	.consumer_supplies	= sdp3430_vmmc1_supplies,
};

/* VMMC2 for MMC2 card */
static struct regulator_init_data sdp3430_vmmc2 = {
	.constraints = {
		.min_uV			= 1850000,
		.max_uV			= 1850000,
		.apply_uV		= true,
		.valid_modes_mask	= REGULATOR_MODE_NORMAL
					| REGULATOR_MODE_STANDBY,
		.valid_ops_mask		= REGULATOR_CHANGE_MODE
					| REGULATOR_CHANGE_STATUS,
	},
	.num_consumer_supplies	= ARRAY_SIZE(sdp3430_vmmc2_supplies),
	.consumer_supplies	= sdp3430_vmmc2_supplies,
};

/* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
static struct regulator_init_data sdp3430_vsim = {
	.constraints = {
		.min_uV			= 1800000,
		.max_uV			= 3000000,
		.valid_modes_mask	= REGULATOR_MODE_NORMAL
					| REGULATOR_MODE_STANDBY,
		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
					| REGULATOR_CHANGE_MODE
					| REGULATOR_CHANGE_STATUS,
	},
	.num_consumer_supplies	= ARRAY_SIZE(sdp3430_vsim_supplies),
	.consumer_supplies	= sdp3430_vsim_supplies,
};

static struct twl4030_platform_data sdp3430_twldata = {
	/* platform_data for children goes here */
	.gpio		= &sdp3430_gpio_data,
	.keypad		= &sdp3430_kp_data,

	.vaux1		= &sdp3430_vaux1,
	.vaux2		= &sdp3430_vaux2,
	.vaux3		= &sdp3430_vaux3,
	.vaux4		= &sdp3430_vaux4,
	.vmmc1		= &sdp3430_vmmc1,
	.vmmc2		= &sdp3430_vmmc2,
	.vsim		= &sdp3430_vsim,
};

static int __init omap3430_i2c_init(void)
{
	/* i2c1 for PMIC only */
	omap3_pmic_get_config(&sdp3430_twldata,
			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_BCI |
			TWL_COMMON_PDATA_MADC | TWL_COMMON_PDATA_AUDIO,
			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
	sdp3430_twldata.vdac->constraints.apply_uV = true;
	sdp3430_twldata.vpll2->constraints.apply_uV = true;
	sdp3430_twldata.vpll2->constraints.name = "VDVI";

	sdp3430_twldata.audio->codec->hs_extmute = 1;
	sdp3430_twldata.audio->codec->hs_extmute_gpio = -EINVAL;

	omap3_pmic_init("twl4030", &sdp3430_twldata);

	/* i2c2 on camera connector (for sensor control) and optional isp1301 */
	omap_register_i2c_bus(2, 400, NULL, 0);
	/* i2c3 on display connector (for DVI, tfp410) */
	omap_register_i2c_bus(3, 400, NULL, 0);
	return 0;
}

#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)

static struct omap_smc91x_platform_data board_smc91x_data = {
	.cs		= 3,
	.flags		= GPMC_MUX_ADD_DATA | GPMC_TIMINGS_SMC91C96 |
				IORESOURCE_IRQ_LOWLEVEL,
};

static void __init board_smc91x_init(void)
{
	if (omap_rev() > OMAP3430_REV_ES1_0)
		board_smc91x_data.gpio_irq = 6;
	else
		board_smc91x_data.gpio_irq = 29;

	gpmc_smc91x_init(&board_smc91x_data);
}

#else

static inline void board_smc91x_init(void)
{
}

#endif

static void enable_board_wakeup_source(void)
{
	/* T2 interrupt line (keypad) */
	omap_mux_init_signal("sys_nirq",
		OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
}

static struct usbhs_omap_platform_data usbhs_bdata __initdata = {

	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,

	.phy_reset  = true,
	.reset_gpio_port[0]  = 57,
	.reset_gpio_port[1]  = 61,
	.reset_gpio_port[2]  = -EINVAL
};

#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
	{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#else
#define board_mux	NULL
#endif

/*
 * SDP3430 V2 Board CS organization
 * Different from SDP3430 V1. Now 4 switches used to specify CS
 *
 * See also the Switch S8 settings in the comments.
 */
static char chip_sel_3430[][GPMC_CS_NUM] = {
	{PDC_NOR, PDC_NAND, PDC_ONENAND, DBG_MPDB, 0, 0, 0, 0}, /* S8:1111 */
	{PDC_ONENAND, PDC_NAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1110 */
	{PDC_NAND, PDC_ONENAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1101 */
};

static struct mtd_partition sdp_nor_partitions[] = {
	/* bootloader (U-Boot, etc) in first sector */
	{
		.name		= "Bootloader-NOR",
		.offset		= 0,
		.size		= SZ_256K,
		.mask_flags	= MTD_WRITEABLE, /* force read-only */
	},
	/* bootloader params in the next sector */
	{
		.name		= "Params-NOR",
		.offset		= MTDPART_OFS_APPEND,
		.size		= SZ_256K,
		.mask_flags	= 0,
	},
	/* kernel */
	{
		.name		= "Kernel-NOR",
		.offset		= MTDPART_OFS_APPEND,
		.size		= SZ_2M,
		.mask_flags	= 0
	},
	/* file system */
	{
		.name		= "Filesystem-NOR",
		.offset		= MTDPART_OFS_APPEND,
		.size		= MTDPART_SIZ_FULL,
		.mask_flags	= 0
	}
};

static struct mtd_partition sdp_onenand_partitions[] = {
	{
		.name		= "X-Loader-OneNAND",
		.offset		= 0,
		.size		= 4 * (64 * 2048),
		.mask_flags	= MTD_WRITEABLE  /* force read-only */
	},
	{
		.name		= "U-Boot-OneNAND",
		.offset		= MTDPART_OFS_APPEND,
		.size		= 2 * (64 * 2048),
		.mask_flags	= MTD_WRITEABLE  /* force read-only */
	},
	{
		.name		= "U-Boot Environment-OneNAND",
		.offset		= MTDPART_OFS_APPEND,
		.size		= 1 * (64 * 2048),
	},
	{
		.name		= "Kernel-OneNAND",
		.offset		= MTDPART_OFS_APPEND,
		.size		= 16 * (64 * 2048),
	},
	{
		.name		= "File System-OneNAND",
		.offset		= MTDPART_OFS_APPEND,
		.size		= MTDPART_SIZ_FULL,
	},
};

static struct mtd_partition sdp_nand_partitions[] = {
	/* All the partition sizes are listed in terms of NAND block size */
	{
		.name		= "X-Loader-NAND",
		.offset		= 0,
		.size		= 4 * (64 * 2048),
		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
	},
	{
		.name		= "U-Boot-NAND",
		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
		.size		= 10 * (64 * 2048),
		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
	},
	{
		.name		= "Boot Env-NAND",

		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x1c0000 */
		.size		= 6 * (64 * 2048),
	},
	{
		.name		= "Kernel-NAND",
		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x280000 */
		.size		= 40 * (64 * 2048),
	},
	{
		.name		= "File System - NAND",
		.size		= MTDPART_SIZ_FULL,
		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x780000 */
	},
};

static struct flash_partitions sdp_flash_partitions[] = {
	{
		.parts = sdp_nor_partitions,
		.nr_parts = ARRAY_SIZE(sdp_nor_partitions),
	},
	{
		.parts = sdp_onenand_partitions,
		.nr_parts = ARRAY_SIZE(sdp_onenand_partitions),
	},
	{
		.parts = sdp_nand_partitions,
		.nr_parts = ARRAY_SIZE(sdp_nand_partitions),
	},
};

static void __init omap_3430sdp_init(void)
{
	int gpio_pendown;

	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
	omap_hsmmc_init(mmc);
	omap3430_i2c_init();
	omap_display_init(&sdp3430_dss_data);
	if (omap_rev() > OMAP3430_REV_ES1_0)
		gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV2;
	else
		gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV1;
	omap_ads7846_init(1, gpio_pendown, 310, NULL);
	omap_serial_init();
	omap_sdrc_init(hyb18m512160af6_sdrc_params, NULL);
	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
	usb_musb_init(NULL);
	board_smc91x_init();
	board_flash_init(sdp_flash_partitions, chip_sel_3430, 0);
	sdp3430_display_init();
	enable_board_wakeup_source();
	usbhs_init(&usbhs_bdata);
}

MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
	/* Maintainer: Syed Khasim - Texas Instruments Inc */
	.atag_offset	= 0x100,
	.reserve	= omap_reserve,
	.map_io		= omap3_map_io,
	.init_early	= omap3430_init_early,
	.init_irq	= omap3_init_irq,
	.handle_irq	= omap3_intc_handle_irq,
	.init_machine	= omap_3430sdp_init,
	.init_late	= omap3430_init_late,
	.init_time	= omap3_sync32k_timer_init,
	.restart	= omap3xxx_restart,
MACHINE_END
Commit	Line	Data
	1	/*
	2	* linux/arch/arm/mach-omap2/board-3430sdp.c
	3	*
	4	* Copyright (C) 2007 Texas Instruments
	5	*
	6	* Modified from mach-omap2/board-generic.c
	7	*
	8	* Initial code: Syed Mohammed Khasim
	9	*
	10	* This program is free software; you can redistribute it and/or modify
	11	* it under the terms of the GNU General Public License version 2 as
	12	* published by the Free Software Foundation.
	13	*/
	14
	15	#include <linux/kernel.h>
	16	#include <linux/init.h>
	17	#include <linux/platform_device.h>
	18	#include <linux/delay.h>
	19	#include <linux/input.h>
	20	#include <linux/input/matrix_keypad.h>
	21	#include <linux/spi/spi.h>
	22	#include <linux/i2c/twl.h>
	23	#include <linux/regulator/machine.h>
	24	#include <linux/io.h>
	25	#include <linux/gpio.h>
	26	#include <linux/mmc/host.h>
	27	#include <linux/platform_data/spi-omap2-mcspi.h>
	28	#include <linux/platform_data/omap-twl4030.h>
	29	#include <linux/usb/phy.h>
	30
	31	#include <asm/mach-types.h>
	32	#include <asm/mach/arch.h>
	33	#include <asm/mach/map.h>
	34
	35	#include "common.h"
	36	#include <linux/omap-dma.h>
	37	#include <video/omapdss.h>
	38	#include <video/omap-panel-tfp410.h>
	39
	40	#include "gpmc.h"
	41	#include "gpmc-smc91x.h"
	42
	43	#include "soc.h"
	44	#include "board-flash.h"
	45	#include "mux.h"
	46	#include "sdram-qimonda-hyb18m512160af-6.h"
	47	#include "hsmmc.h"
	48	#include "pm.h"
	49	#include "control.h"
	50	#include "common-board-devices.h"
	51
	52	#define CONFIG_DISABLE_HFCLK 1
	53
	54	#define SDP3430_TS_GPIO_IRQ_SDPV1 3
	55	#define SDP3430_TS_GPIO_IRQ_SDPV2 2
	56
	57	#define ENABLE_VAUX3_DEDICATED 0x03
	58	#define ENABLE_VAUX3_DEV_GRP 0x20
	59
	60	#define TWL4030_MSECURE_GPIO 22
	61
	62	static uint32_t board_keymap[] = {
	63	KEY(0, 0, KEY_LEFT),
	64	KEY(0, 1, KEY_RIGHT),
	65	KEY(0, 2, KEY_A),
	66	KEY(0, 3, KEY_B),
	67	KEY(0, 4, KEY_C),
	68	KEY(1, 0, KEY_DOWN),
	69	KEY(1, 1, KEY_UP),
	70	KEY(1, 2, KEY_E),
	71	KEY(1, 3, KEY_F),
	72	KEY(1, 4, KEY_G),
	73	KEY(2, 0, KEY_ENTER),
	74	KEY(2, 1, KEY_I),
	75	KEY(2, 2, KEY_J),
	76	KEY(2, 3, KEY_K),
	77	KEY(2, 4, KEY_3),
	78	KEY(3, 0, KEY_M),
	79	KEY(3, 1, KEY_N),
	80	KEY(3, 2, KEY_O),
	81	KEY(3, 3, KEY_P),
	82	KEY(3, 4, KEY_Q),
	83	KEY(4, 0, KEY_R),
	84	KEY(4, 1, KEY_4),
	85	KEY(4, 2, KEY_T),
	86	KEY(4, 3, KEY_U),
	87	KEY(4, 4, KEY_D),
	88	KEY(5, 0, KEY_V),
	89	KEY(5, 1, KEY_W),
	90	KEY(5, 2, KEY_L),
	91	KEY(5, 3, KEY_S),
	92	KEY(5, 4, KEY_H),
	93	0
	94	};
	95
	96	static struct matrix_keymap_data board_map_data = {
	97	.keymap = board_keymap,
	98	.keymap_size = ARRAY_SIZE(board_keymap),
	99	};
	100
	101	static struct twl4030_keypad_data sdp3430_kp_data = {
	102	.keymap_data = &board_map_data,
	103	.rows = 5,
	104	.cols = 6,
	105	.rep = 1,
	106	};
	107
	108	#define SDP3430_LCD_PANEL_BACKLIGHT_GPIO 8
	109	#define SDP3430_LCD_PANEL_ENABLE_GPIO 5
	110
	111	static struct gpio sdp3430_dss_gpios[] __initdata = {
	112	{SDP3430_LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW, "LCD reset" },
	113	{SDP3430_LCD_PANEL_BACKLIGHT_GPIO, GPIOF_OUT_INIT_LOW, "LCD Backlight"},
	114	};
	115
	116	static void __init sdp3430_display_init(void)
	117	{
	118	int r;
	119
	120	r = gpio_request_array(sdp3430_dss_gpios,
	121	ARRAY_SIZE(sdp3430_dss_gpios));
	122	if (r)
	123	printk(KERN_ERR "failed to get LCD control GPIOs\n");
	124
	125	}
	126
	127	static int sdp3430_panel_enable_lcd(struct omap_dss_device *dssdev)
	128	{
	129	gpio_direction_output(SDP3430_LCD_PANEL_ENABLE_GPIO, 1);
	130	gpio_direction_output(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, 1);
	131
	132	return 0;
	133	}
	134
	135	static void sdp3430_panel_disable_lcd(struct omap_dss_device *dssdev)
	136	{
	137	gpio_direction_output(SDP3430_LCD_PANEL_ENABLE_GPIO, 0);
	138	gpio_direction_output(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, 0);
	139	}
	140
	141	static int sdp3430_panel_enable_tv(struct omap_dss_device *dssdev)
	142	{
	143	return 0;
	144	}
	145
	146	static void sdp3430_panel_disable_tv(struct omap_dss_device *dssdev)
	147	{
	148	}
	149
	150
	151	static struct omap_dss_device sdp3430_lcd_device = {
	152	.name = "lcd",
	153	.driver_name = "sharp_ls_panel",
	154	.type = OMAP_DISPLAY_TYPE_DPI,
	155	.phy.dpi.data_lines = 16,
	156	.platform_enable = sdp3430_panel_enable_lcd,
	157	.platform_disable = sdp3430_panel_disable_lcd,
	158	};
	159
	160	static struct tfp410_platform_data dvi_panel = {
	161	.power_down_gpio = -1,
	162	.i2c_bus_num = -1,
	163	};
	164
	165	static struct omap_dss_device sdp3430_dvi_device = {
	166	.name = "dvi",
	167	.type = OMAP_DISPLAY_TYPE_DPI,
	168	.driver_name = "tfp410",
	169	.data = &dvi_panel,
	170	.phy.dpi.data_lines = 24,
	171	};
	172
	173	static struct omap_dss_device sdp3430_tv_device = {
	174	.name = "tv",
	175	.driver_name = "venc",
	176	.type = OMAP_DISPLAY_TYPE_VENC,
	177	.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
	178	.platform_enable = sdp3430_panel_enable_tv,
	179	.platform_disable = sdp3430_panel_disable_tv,
	180	};
	181
	182
	183	static struct omap_dss_device *sdp3430_dss_devices[] = {
	184	&sdp3430_lcd_device,
	185	&sdp3430_dvi_device,
	186	&sdp3430_tv_device,
	187	};
	188
	189	static struct omap_dss_board_info sdp3430_dss_data = {
	190	.num_devices = ARRAY_SIZE(sdp3430_dss_devices),
	191	.devices = sdp3430_dss_devices,
	192	.default_device = &sdp3430_lcd_device,
	193	};
	194
	195	static struct omap2_hsmmc_info mmc[] = {
	196	{
	197	.mmc = 1,
	198	/* 8 bits (default) requires S6.3 == ON,
	199	* so the SIM card isn't used; else 4 bits.
	200	*/
	201	.caps = MMC_CAP_4_BIT_DATA \| MMC_CAP_8_BIT_DATA,
	202	.gpio_wp = 4,
	203	.deferred = true,
	204	},
	205	{
	206	.mmc = 2,
	207	.caps = MMC_CAP_4_BIT_DATA \| MMC_CAP_8_BIT_DATA,
	208	.gpio_wp = 7,
	209	.deferred = true,
	210	},
	211	{} /* Terminator */
	212	};
	213
	214	static struct omap_tw4030_pdata omap_twl4030_audio_data = {
	215	.voice_connected = true,
	216	.custom_routing = true,
	217
	218	.has_hs = OMAP_TWL4030_LEFT \| OMAP_TWL4030_RIGHT,
	219	.has_hf = OMAP_TWL4030_LEFT \| OMAP_TWL4030_RIGHT,
	220
	221	.has_mainmic = true,
	222	.has_submic = true,
	223	.has_hsmic = true,
	224	.has_linein = OMAP_TWL4030_LEFT \| OMAP_TWL4030_RIGHT,
	225	};
	226
	227	static int sdp3430_twl_gpio_setup(struct device *dev,
	228	unsigned gpio, unsigned ngpio)
	229	{
	230	/* gpio + 0 is "mmc0_cd" (input/IRQ),
	231	* gpio + 1 is "mmc1_cd" (input/IRQ)
	232	*/
	233	mmc[0].gpio_cd = gpio + 0;
	234	mmc[1].gpio_cd = gpio + 1;
	235	omap_hsmmc_late_init(mmc);
	236
	237	/* gpio + 7 is "sub_lcd_en_bkl" (output/PWM1) */
	238	gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "sub_lcd_en_bkl");
	239
	240	/* gpio + 15 is "sub_lcd_nRST" (output) */
	241	gpio_request_one(gpio + 15, GPIOF_OUT_INIT_LOW, "sub_lcd_nRST");
	242
	243	omap_twl4030_audio_data.jack_detect = gpio + 2;
	244	omap_twl4030_audio_init("SDP3430", &omap_twl4030_audio_data);
	245
	246	return 0;
	247	}
	248
	249	static struct twl4030_gpio_platform_data sdp3430_gpio_data = {
	250	.pulldowns = BIT(2) \| BIT(6) \| BIT(8) \| BIT(13)
	251	\| BIT(16) \| BIT(17),
	252	.setup = sdp3430_twl_gpio_setup,
	253	};
	254
	255	/* regulator consumer mappings */
	256
	257	/* ads7846 on SPI */
	258	static struct regulator_consumer_supply sdp3430_vaux3_supplies[] = {
	259	REGULATOR_SUPPLY("vcc", "spi1.0"),
	260	};
	261
	262	static struct regulator_consumer_supply sdp3430_vmmc1_supplies[] = {
	263	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
	264	};
	265
	266	static struct regulator_consumer_supply sdp3430_vsim_supplies[] = {
	267	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
	268	};
	269
	270	static struct regulator_consumer_supply sdp3430_vmmc2_supplies[] = {
	271	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
	272	};
	273
	274	/*
	275	* Apply all the fixed voltages since most versions of U-Boot
	276	* don't bother with that initialization.
	277	*/
	278
	279	/* VAUX1 for mainboard (irda and sub-lcd) */
	280	static struct regulator_init_data sdp3430_vaux1 = {
	281	.constraints = {
	282	.min_uV = 2800000,
	283	.max_uV = 2800000,
	284	.apply_uV = true,
	285	.valid_modes_mask = REGULATOR_MODE_NORMAL
	286	\| REGULATOR_MODE_STANDBY,
	287	.valid_ops_mask = REGULATOR_CHANGE_MODE
	288	\| REGULATOR_CHANGE_STATUS,
	289	},
	290	};
	291
	292	/* VAUX2 for camera module */
	293	static struct regulator_init_data sdp3430_vaux2 = {
	294	.constraints = {
	295	.min_uV = 2800000,
	296	.max_uV = 2800000,
	297	.apply_uV = true,
	298	.valid_modes_mask = REGULATOR_MODE_NORMAL
	299	\| REGULATOR_MODE_STANDBY,
	300	.valid_ops_mask = REGULATOR_CHANGE_MODE
	301	\| REGULATOR_CHANGE_STATUS,
	302	},
	303	};
	304
	305	/* VAUX3 for LCD board */
	306	static struct regulator_init_data sdp3430_vaux3 = {
	307	.constraints = {
	308	.min_uV = 2800000,
	309	.max_uV = 2800000,
	310	.apply_uV = true,
	311	.valid_modes_mask = REGULATOR_MODE_NORMAL
	312	\| REGULATOR_MODE_STANDBY,
	313	.valid_ops_mask = REGULATOR_CHANGE_MODE
	314	\| REGULATOR_CHANGE_STATUS,
	315	},
	316	.num_consumer_supplies = ARRAY_SIZE(sdp3430_vaux3_supplies),
	317	.consumer_supplies = sdp3430_vaux3_supplies,
	318	};
	319
	320	/* VAUX4 for OMAP VDD_CSI2 (camera) */
	321	static struct regulator_init_data sdp3430_vaux4 = {
	322	.constraints = {
	323	.min_uV = 1800000,
	324	.max_uV = 1800000,
	325	.apply_uV = true,
	326	.valid_modes_mask = REGULATOR_MODE_NORMAL
	327	\| REGULATOR_MODE_STANDBY,
	328	.valid_ops_mask = REGULATOR_CHANGE_MODE
	329	\| REGULATOR_CHANGE_STATUS,
	330	},
	331	};
	332
	333	/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
	334	static struct regulator_init_data sdp3430_vmmc1 = {
	335	.constraints = {
	336	.min_uV = 1850000,
	337	.max_uV = 3150000,
	338	.valid_modes_mask = REGULATOR_MODE_NORMAL
	339	\| REGULATOR_MODE_STANDBY,
	340	.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
	341	\| REGULATOR_CHANGE_MODE
	342	\| REGULATOR_CHANGE_STATUS,
	343	},
	344	.num_consumer_supplies = ARRAY_SIZE(sdp3430_vmmc1_supplies),
	345	.consumer_supplies = sdp3430_vmmc1_supplies,
	346	};
	347
	348	/* VMMC2 for MMC2 card */
	349	static struct regulator_init_data sdp3430_vmmc2 = {
	350	.constraints = {
	351	.min_uV = 1850000,
	352	.max_uV = 1850000,
	353	.apply_uV = true,
	354	.valid_modes_mask = REGULATOR_MODE_NORMAL
	355	\| REGULATOR_MODE_STANDBY,
	356	.valid_ops_mask = REGULATOR_CHANGE_MODE
	357	\| REGULATOR_CHANGE_STATUS,
	358	},
	359	.num_consumer_supplies = ARRAY_SIZE(sdp3430_vmmc2_supplies),
	360	.consumer_supplies = sdp3430_vmmc2_supplies,
	361	};
	362
	363	/* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
	364	static struct regulator_init_data sdp3430_vsim = {
	365	.constraints = {
	366	.min_uV = 1800000,
	367	.max_uV = 3000000,
	368	.valid_modes_mask = REGULATOR_MODE_NORMAL
	369	\| REGULATOR_MODE_STANDBY,
	370	.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
	371	\| REGULATOR_CHANGE_MODE
	372	\| REGULATOR_CHANGE_STATUS,
	373	},
	374	.num_consumer_supplies = ARRAY_SIZE(sdp3430_vsim_supplies),
	375	.consumer_supplies = sdp3430_vsim_supplies,
	376	};
	377
	378	static struct twl4030_platform_data sdp3430_twldata = {
	379	/* platform_data for children goes here */
	380	.gpio = &sdp3430_gpio_data,
	381	.keypad = &sdp3430_kp_data,
	382
	383	.vaux1 = &sdp3430_vaux1,
	384	.vaux2 = &sdp3430_vaux2,
	385	.vaux3 = &sdp3430_vaux3,
	386	.vaux4 = &sdp3430_vaux4,
	387	.vmmc1 = &sdp3430_vmmc1,
	388	.vmmc2 = &sdp3430_vmmc2,
	389	.vsim = &sdp3430_vsim,
	390	};
	391
	392	static int __init omap3430_i2c_init(void)
	393	{
	394	/* i2c1 for PMIC only */
	395	omap3_pmic_get_config(&sdp3430_twldata,
	396	TWL_COMMON_PDATA_USB \| TWL_COMMON_PDATA_BCI \|
	397	TWL_COMMON_PDATA_MADC \| TWL_COMMON_PDATA_AUDIO,
	398	TWL_COMMON_REGULATOR_VDAC \| TWL_COMMON_REGULATOR_VPLL2);
	399	sdp3430_twldata.vdac->constraints.apply_uV = true;
	400	sdp3430_twldata.vpll2->constraints.apply_uV = true;
	401	sdp3430_twldata.vpll2->constraints.name = "VDVI";
	402
	403	sdp3430_twldata.audio->codec->hs_extmute = 1;
	404	sdp3430_twldata.audio->codec->hs_extmute_gpio = -EINVAL;
	405
	406	omap3_pmic_init("twl4030", &sdp3430_twldata);
	407
	408	/* i2c2 on camera connector (for sensor control) and optional isp1301 */
	409	omap_register_i2c_bus(2, 400, NULL, 0);
	410	/* i2c3 on display connector (for DVI, tfp410) */
	411	omap_register_i2c_bus(3, 400, NULL, 0);
	412	return 0;
	413	}
	414
	415	#if defined(CONFIG_SMC91X) \|\| defined(CONFIG_SMC91X_MODULE)
	416
	417	static struct omap_smc91x_platform_data board_smc91x_data = {
	418	.cs = 3,
	419	.flags = GPMC_MUX_ADD_DATA \| GPMC_TIMINGS_SMC91C96 \|
	420	IORESOURCE_IRQ_LOWLEVEL,
	421	};
	422
	423	static void __init board_smc91x_init(void)
	424	{
	425	if (omap_rev() > OMAP3430_REV_ES1_0)
	426	board_smc91x_data.gpio_irq = 6;
	427	else
	428	board_smc91x_data.gpio_irq = 29;
	429
	430	gpmc_smc91x_init(&board_smc91x_data);
	431	}
	432
	433	#else
	434
	435	static inline void board_smc91x_init(void)
	436	{
	437	}
	438
	439	#endif
	440
	441	static void enable_board_wakeup_source(void)
	442	{
	443	/* T2 interrupt line (keypad) */
	444	omap_mux_init_signal("sys_nirq",
	445	OMAP_WAKEUP_EN \| OMAP_PIN_INPUT_PULLUP);
	446	}
	447
	448	static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
	449
	450	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
	451	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
	452	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
	453
	454	.phy_reset = true,
	455	.reset_gpio_port[0] = 57,
	456	.reset_gpio_port[1] = 61,
	457	.reset_gpio_port[2] = -EINVAL
	458	};
	459
	460	#ifdef CONFIG_OMAP_MUX
	461	static struct omap_board_mux board_mux[] __initdata = {
	462	{ .reg_offset = OMAP_MUX_TERMINATOR },
	463	};
	464	#else
	465	#define board_mux NULL
	466	#endif
	467
	468	/*
	469	* SDP3430 V2 Board CS organization
	470	* Different from SDP3430 V1. Now 4 switches used to specify CS
	471	*
	472	* See also the Switch S8 settings in the comments.
	473	*/
	474	static char chip_sel_3430[][GPMC_CS_NUM] = {
	475	{PDC_NOR, PDC_NAND, PDC_ONENAND, DBG_MPDB, 0, 0, 0, 0}, /* S8:1111 */
	476	{PDC_ONENAND, PDC_NAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1110 */
	477	{PDC_NAND, PDC_ONENAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1101 */
	478	};
	479
	480	static struct mtd_partition sdp_nor_partitions[] = {
	481	/* bootloader (U-Boot, etc) in first sector */
	482	{
	483	.name = "Bootloader-NOR",
	484	.offset = 0,
	485	.size = SZ_256K,
	486	.mask_flags = MTD_WRITEABLE, /* force read-only */
	487	},
	488	/* bootloader params in the next sector */
	489	{
	490	.name = "Params-NOR",
	491	.offset = MTDPART_OFS_APPEND,
	492	.size = SZ_256K,
	493	.mask_flags = 0,
	494	},
	495	/* kernel */
	496	{
	497	.name = "Kernel-NOR",
	498	.offset = MTDPART_OFS_APPEND,
	499	.size = SZ_2M,
	500	.mask_flags = 0
	501	},
	502	/* file system */
	503	{
	504	.name = "Filesystem-NOR",
	505	.offset = MTDPART_OFS_APPEND,
	506	.size = MTDPART_SIZ_FULL,
	507	.mask_flags = 0
	508	}
	509	};
	510
	511	static struct mtd_partition sdp_onenand_partitions[] = {
	512	{
	513	.name = "X-Loader-OneNAND",
	514	.offset = 0,
	515	.size = 4 * (64 * 2048),
	516	.mask_flags = MTD_WRITEABLE /* force read-only */
	517	},
	518	{
	519	.name = "U-Boot-OneNAND",
	520	.offset = MTDPART_OFS_APPEND,
	521	.size = 2 * (64 * 2048),
	522	.mask_flags = MTD_WRITEABLE /* force read-only */
	523	},
	524	{
	525	.name = "U-Boot Environment-OneNAND",
	526	.offset = MTDPART_OFS_APPEND,
	527	.size = 1 * (64 * 2048),
	528	},
	529	{
	530	.name = "Kernel-OneNAND",
	531	.offset = MTDPART_OFS_APPEND,
	532	.size = 16 * (64 * 2048),
	533	},
	534	{
	535	.name = "File System-OneNAND",
	536	.offset = MTDPART_OFS_APPEND,
	537	.size = MTDPART_SIZ_FULL,
	538	},
	539	};
	540
	541	static struct mtd_partition sdp_nand_partitions[] = {
	542	/* All the partition sizes are listed in terms of NAND block size */
	543	{
	544	.name = "X-Loader-NAND",
	545	.offset = 0,
	546	.size = 4 * (64 * 2048),
	547	.mask_flags = MTD_WRITEABLE, /* force read-only */
	548	},
	549	{
	550	.name = "U-Boot-NAND",
	551	.offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */
	552	.size = 10 * (64 * 2048),
	553	.mask_flags = MTD_WRITEABLE, /* force read-only */
	554	},
	555	{
	556	.name = "Boot Env-NAND",
	557
	558	.offset = MTDPART_OFS_APPEND, /* Offset = 0x1c0000 */
	559	.size = 6 * (64 * 2048),
	560	},
	561	{
	562	.name = "Kernel-NAND",
	563	.offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */
	564	.size = 40 * (64 * 2048),
	565	},
	566	{
	567	.name = "File System - NAND",
	568	.size = MTDPART_SIZ_FULL,
	569	.offset = MTDPART_OFS_APPEND, /* Offset = 0x780000 */
	570	},
	571	};
	572
	573	static struct flash_partitions sdp_flash_partitions[] = {
	574	{
	575	.parts = sdp_nor_partitions,
	576	.nr_parts = ARRAY_SIZE(sdp_nor_partitions),
	577	},
	578	{
	579	.parts = sdp_onenand_partitions,
	580	.nr_parts = ARRAY_SIZE(sdp_onenand_partitions),
	581	},
	582	{
	583	.parts = sdp_nand_partitions,
	584	.nr_parts = ARRAY_SIZE(sdp_nand_partitions),
	585	},
	586	};
	587
	588	static void __init omap_3430sdp_init(void)
	589	{
	590	int gpio_pendown;
	591
	592	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
	593	omap_hsmmc_init(mmc);
	594	omap3430_i2c_init();
	595	omap_display_init(&sdp3430_dss_data);
	596	if (omap_rev() > OMAP3430_REV_ES1_0)
	597	gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV2;
	598	else
	599	gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV1;
	600	omap_ads7846_init(1, gpio_pendown, 310, NULL);
	601	omap_serial_init();
	602	omap_sdrc_init(hyb18m512160af6_sdrc_params, NULL);
	603	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
	604	usb_musb_init(NULL);
	605	board_smc91x_init();
	606	board_flash_init(sdp_flash_partitions, chip_sel_3430, 0);
	607	sdp3430_display_init();
	608	enable_board_wakeup_source();
	609	usbhs_init(&usbhs_bdata);
	610	}
	611
	612	MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
	613	/* Maintainer: Syed Khasim - Texas Instruments Inc */
	614	.atag_offset = 0x100,
	615	.reserve = omap_reserve,
	616	.map_io = omap3_map_io,
	617	.init_early = omap3430_init_early,
	618	.init_irq = omap3_init_irq,
	619	.handle_irq = omap3_intc_handle_irq,
	620	.init_machine = omap_3430sdp_init,
	621	.init_late = omap3430_init_late,
	622	.init_time = omap3_sync32k_timer_init,
	623	.restart = omap3xxx_restart,
	624	MACHINE_END