| 1 | if ARCH_PXA |
| 2 | |
| 3 | menu "Intel PXA2xx/PXA3xx Implementations" |
| 4 | |
| 5 | comment "Intel/Marvell Dev Platforms (sorted by hardware release time)" |
| 6 | |
| 7 | config MACH_PXA27X_DT |
| 8 | bool "Support PXA27x platforms from device tree" |
| 9 | select PINCTRL |
| 10 | select POWER_SUPPLY |
| 11 | select PXA27x |
| 12 | select USE_OF |
| 13 | help |
| 14 | Include support for Marvell PXA27x based platforms using |
| 15 | the device tree. Needn't select any other machine while |
| 16 | MACH_PXA27X_DT is enabled. |
| 17 | |
| 18 | config MACH_PXA3XX_DT |
| 19 | bool "Support PXA3xx platforms from device tree" |
| 20 | select CPU_PXA300 |
| 21 | select PINCTRL |
| 22 | select POWER_SUPPLY |
| 23 | select PXA3xx |
| 24 | select USE_OF |
| 25 | help |
| 26 | Include support for Marvell PXA3xx based platforms using |
| 27 | the device tree. Needn't select any other machine while |
| 28 | MACH_PXA3XX_DT is enabled. |
| 29 | |
| 30 | config ARCH_LUBBOCK |
| 31 | bool "Intel DBPXA250 Development Platform (aka Lubbock)" |
| 32 | select PXA25x |
| 33 | select SA1111 |
| 34 | |
| 35 | config MACH_MAINSTONE |
| 36 | bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)" |
| 37 | select PXA27x |
| 38 | |
| 39 | config MACH_ZYLONITE |
| 40 | bool |
| 41 | select PXA3xx |
| 42 | |
| 43 | config MACH_ZYLONITE300 |
| 44 | bool "PXA3xx Development Platform (aka Zylonite) PXA300/310" |
| 45 | select CPU_PXA300 |
| 46 | select CPU_PXA310 |
| 47 | select MACH_ZYLONITE |
| 48 | |
| 49 | config MACH_ZYLONITE320 |
| 50 | bool "PXA3xx Development Platform (aka Zylonite) PXA320" |
| 51 | select CPU_PXA320 |
| 52 | select MACH_ZYLONITE |
| 53 | |
| 54 | config MACH_LITTLETON |
| 55 | bool "PXA3xx Form Factor Platform (aka Littleton)" |
| 56 | select CPU_PXA300 |
| 57 | select CPU_PXA310 |
| 58 | select PXA3xx |
| 59 | |
| 60 | config MACH_TAVOREVB |
| 61 | bool "PXA930 Evaluation Board (aka TavorEVB)" |
| 62 | select CPU_PXA930 |
| 63 | select CPU_PXA935 |
| 64 | select PXA3xx |
| 65 | select FB |
| 66 | select FB_PXA |
| 67 | |
| 68 | config MACH_SAAR |
| 69 | bool "PXA930 Handheld Platform (aka SAAR)" |
| 70 | select CPU_PXA930 |
| 71 | select CPU_PXA935 |
| 72 | select PXA3xx |
| 73 | select FB |
| 74 | select FB_PXA |
| 75 | |
| 76 | comment "Third Party Dev Platforms (sorted by vendor name)" |
| 77 | |
| 78 | config ARCH_PXA_IDP |
| 79 | bool "Accelent Xscale IDP" |
| 80 | select PXA25x |
| 81 | |
| 82 | config ARCH_VIPER |
| 83 | bool "Arcom/Eurotech VIPER SBC" |
| 84 | select ARCOM_PCMCIA |
| 85 | select I2C_GPIO if I2C=y |
| 86 | select ISA |
| 87 | select PXA25x |
| 88 | |
| 89 | config MACH_ARCOM_ZEUS |
| 90 | bool "Arcom/Eurotech ZEUS SBC" |
| 91 | select ARCOM_PCMCIA |
| 92 | select ISA |
| 93 | select PXA27x |
| 94 | |
| 95 | config MACH_BALLOON3 |
| 96 | bool "Balloon 3 board" |
| 97 | select IWMMXT |
| 98 | select PXA27x |
| 99 | |
| 100 | config MACH_CSB726 |
| 101 | bool "Enable Cogent CSB726 System On a Module" |
| 102 | select IWMMXT |
| 103 | select PXA27x |
| 104 | help |
| 105 | Say Y here if you intend to run this kernel on a Cogent |
| 106 | CSB726 System On Module. |
| 107 | |
| 108 | config CSB726_CSB701 |
| 109 | bool "Enable support for CSB701 baseboard" |
| 110 | depends on MACH_CSB726 |
| 111 | |
| 112 | config MACH_ARMCORE |
| 113 | bool "CompuLab CM-X255/CM-X270 modules" |
| 114 | select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI |
| 115 | select IWMMXT |
| 116 | select MIGHT_HAVE_PCI |
| 117 | select NEED_MACH_IO_H if PCI |
| 118 | select PXA25x |
| 119 | select PXA27x |
| 120 | |
| 121 | config MACH_EM_X270 |
| 122 | bool "CompuLab EM-x270 platform" |
| 123 | select PXA27x |
| 124 | |
| 125 | config MACH_EXEDA |
| 126 | bool "CompuLab eXeda platform" |
| 127 | select PXA27x |
| 128 | |
| 129 | config MACH_CM_X300 |
| 130 | bool "CompuLab CM-X300 modules" |
| 131 | select CPU_PXA300 |
| 132 | select CPU_PXA310 |
| 133 | select PXA3xx |
| 134 | |
| 135 | config MACH_CAPC7117 |
| 136 | bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM" |
| 137 | select CPU_PXA320 |
| 138 | select PXA3xx |
| 139 | |
| 140 | config ARCH_GUMSTIX |
| 141 | bool "Gumstix XScale 255 boards" |
| 142 | select PXA25x |
| 143 | help |
| 144 | Say Y here if you intend to run this kernel on |
| 145 | Basix, Connex, ws-200ax, ws-400ax systems |
| 146 | |
| 147 | choice |
| 148 | prompt "Gumstix Carrier/Expansion Board" |
| 149 | depends on ARCH_GUMSTIX |
| 150 | |
| 151 | config GUMSTIX_AM200EPD |
| 152 | bool "Enable AM200EPD board support" |
| 153 | |
| 154 | config GUMSTIX_AM300EPD |
| 155 | bool "Enable AM300EPD board support" |
| 156 | |
| 157 | endchoice |
| 158 | |
| 159 | config MACH_INTELMOTE2 |
| 160 | bool "Intel Mote 2 Platform" |
| 161 | select IWMMXT |
| 162 | select PXA27x |
| 163 | |
| 164 | config MACH_STARGATE2 |
| 165 | bool "Intel Stargate 2 Platform" |
| 166 | select IWMMXT |
| 167 | select PXA27x |
| 168 | |
| 169 | config MACH_XCEP |
| 170 | bool "Iskratel Electronics XCEP" |
| 171 | select MTD |
| 172 | select MTD_CFI |
| 173 | select MTD_CFI_INTELEXT |
| 174 | select MTD_PHYSMAP |
| 175 | select PXA25x |
| 176 | help |
| 177 | PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash. |
| 178 | Tuned for usage in Libera instruments for particle accelerators. |
| 179 | |
| 180 | config TRIZEPS_PXA |
| 181 | bool "PXA based Keith und Koep Trizeps DIMM-Modules" |
| 182 | |
| 183 | config MACH_TRIZEPS4 |
| 184 | bool "Keith und Koep Trizeps4 DIMM-Module" |
| 185 | depends on TRIZEPS_PXA |
| 186 | select PXA27x |
| 187 | select TRIZEPS_PCMCIA |
| 188 | |
| 189 | config MACH_TRIZEPS4WL |
| 190 | bool "Keith und Koep Trizeps4-WL DIMM-Module" |
| 191 | depends on TRIZEPS_PXA |
| 192 | select MACH_TRIZEPS4 |
| 193 | select PXA27x |
| 194 | select TRIZEPS_PCMCIA |
| 195 | |
| 196 | choice |
| 197 | prompt "Select base board for Trizeps module" |
| 198 | depends on TRIZEPS_PXA |
| 199 | |
| 200 | config MACH_TRIZEPS_CONXS |
| 201 | bool "ConXS Eval Board" |
| 202 | |
| 203 | config MACH_TRIZEPS_UCONXS |
| 204 | bool "uConXS Eval Board" |
| 205 | |
| 206 | config MACH_TRIZEPS_ANY |
| 207 | bool "another Board" |
| 208 | |
| 209 | endchoice |
| 210 | |
| 211 | config ARCOM_PCMCIA |
| 212 | bool |
| 213 | help |
| 214 | Generic option for Arcom Viper/Zeus PCMCIA |
| 215 | |
| 216 | config TRIZEPS_PCMCIA |
| 217 | bool |
| 218 | help |
| 219 | Enable PCMCIA support for Trizeps modules |
| 220 | |
| 221 | config MACH_LOGICPD_PXA270 |
| 222 | bool "LogicPD PXA270 Card Engine Development Platform" |
| 223 | select PXA27x |
| 224 | |
| 225 | config MACH_PCM027 |
| 226 | bool "Phytec phyCORE-PXA270 CPU module (PCM-027)" |
| 227 | select IWMMXT |
| 228 | select PXA27x |
| 229 | |
| 230 | config MACH_PCM990_BASEBOARD |
| 231 | bool "PHYTEC PCM-990 development board" |
| 232 | depends on MACH_PCM027 |
| 233 | |
| 234 | choice |
| 235 | prompt "display on pcm990" |
| 236 | depends on MACH_PCM990_BASEBOARD |
| 237 | |
| 238 | config PCM990_DISPLAY_SHARP |
| 239 | bool "sharp lq084v1dg21 stn display" |
| 240 | |
| 241 | config PCM990_DISPLAY_NEC |
| 242 | bool "nec nl6448bc20_18d tft display" |
| 243 | |
| 244 | config PCM990_DISPLAY_NONE |
| 245 | bool "no display" |
| 246 | |
| 247 | endchoice |
| 248 | |
| 249 | config MACH_COLIBRI |
| 250 | bool "Toradex Colibri PXA270" |
| 251 | select PXA27x |
| 252 | |
| 253 | config MACH_COLIBRI_PXA270_INCOME |
| 254 | bool "Income s.r.o. PXA270 SBC" |
| 255 | depends on MACH_COLIBRI |
| 256 | select PXA27x |
| 257 | |
| 258 | config MACH_COLIBRI300 |
| 259 | bool "Toradex Colibri PXA300/310" |
| 260 | select CPU_PXA300 |
| 261 | select CPU_PXA310 |
| 262 | select PXA3xx |
| 263 | |
| 264 | config MACH_COLIBRI320 |
| 265 | bool "Toradex Colibri PXA320" |
| 266 | select CPU_PXA320 |
| 267 | select PXA3xx |
| 268 | |
| 269 | config MACH_COLIBRI_EVALBOARD |
| 270 | bool "Toradex Colibri Evaluation Carrier Board support" |
| 271 | depends on MACH_COLIBRI || MACH_COLIBRI300 || MACH_COLIBRI320 |
| 272 | |
| 273 | config MACH_VPAC270 |
| 274 | bool "Voipac PXA270" |
| 275 | select HAVE_PATA_PLATFORM |
| 276 | select PXA27x |
| 277 | help |
| 278 | PXA270 based Single Board Computer. |
| 279 | |
| 280 | comment "End-user Products (sorted by vendor name)" |
| 281 | |
| 282 | config MACH_H4700 |
| 283 | bool "HP iPAQ hx4700" |
| 284 | select IWMMXT |
| 285 | select PXA27x |
| 286 | |
| 287 | config MACH_H5000 |
| 288 | bool "HP iPAQ h5000" |
| 289 | select PXA25x |
| 290 | |
| 291 | config MACH_HIMALAYA |
| 292 | bool "HTC Himalaya Support" |
| 293 | select CPU_PXA26x |
| 294 | |
| 295 | config MACH_MAGICIAN |
| 296 | bool "Enable HTC Magician Support" |
| 297 | select IWMMXT |
| 298 | select PXA27x |
| 299 | |
| 300 | config MACH_MIOA701 |
| 301 | bool "Mitac Mio A701 Support" |
| 302 | select IWMMXT |
| 303 | select PXA27x |
| 304 | help |
| 305 | Say Y here if you intend to run this kernel on a |
| 306 | MIO A701. Currently there is only basic support |
| 307 | for this PDA. |
| 308 | |
| 309 | config PXA_EZX |
| 310 | bool "Motorola EZX Platform" |
| 311 | select IWMMXT |
| 312 | select PXA27x |
| 313 | |
| 314 | config MACH_EZX_A780 |
| 315 | bool "Motorola EZX A780" |
| 316 | default y |
| 317 | depends on PXA_EZX |
| 318 | |
| 319 | config MACH_EZX_E680 |
| 320 | bool "Motorola EZX E680" |
| 321 | default y |
| 322 | depends on PXA_EZX |
| 323 | |
| 324 | config MACH_EZX_A1200 |
| 325 | bool "Motorola EZX A1200" |
| 326 | default y |
| 327 | depends on PXA_EZX |
| 328 | |
| 329 | config MACH_EZX_A910 |
| 330 | bool "Motorola EZX A910" |
| 331 | default y |
| 332 | depends on PXA_EZX |
| 333 | |
| 334 | config MACH_EZX_E6 |
| 335 | bool "Motorola EZX E6" |
| 336 | default y |
| 337 | depends on PXA_EZX |
| 338 | |
| 339 | config MACH_EZX_E2 |
| 340 | bool "Motorola EZX E2" |
| 341 | default y |
| 342 | depends on PXA_EZX |
| 343 | |
| 344 | config MACH_MP900C |
| 345 | bool "Nec Mobilepro 900/c" |
| 346 | select PXA25x |
| 347 | |
| 348 | config ARCH_PXA_PALM |
| 349 | bool "PXA based Palm PDAs" |
| 350 | |
| 351 | config MACH_PALM27X |
| 352 | bool |
| 353 | |
| 354 | config MACH_PALMTE2 |
| 355 | bool "Palm Tungsten|E2" |
| 356 | default y |
| 357 | depends on ARCH_PXA_PALM |
| 358 | select PXA25x |
| 359 | help |
| 360 | Say Y here if you intend to run this kernel on a Palm Tungsten|E2 |
| 361 | handheld computer. |
| 362 | |
| 363 | config MACH_PALMTC |
| 364 | bool "Palm Tungsten|C" |
| 365 | default y |
| 366 | depends on ARCH_PXA_PALM |
| 367 | select PXA25x |
| 368 | help |
| 369 | Say Y here if you intend to run this kernel on a Palm Tungsten|C |
| 370 | handheld computer. |
| 371 | |
| 372 | config MACH_PALMT5 |
| 373 | bool "Palm Tungsten|T5" |
| 374 | default y |
| 375 | depends on ARCH_PXA_PALM |
| 376 | select IWMMXT |
| 377 | select MACH_PALM27X |
| 378 | select PXA27x |
| 379 | help |
| 380 | Say Y here if you intend to run this kernel on a Palm Tungsten|T5 |
| 381 | handheld computer. |
| 382 | |
| 383 | config MACH_PALMTX |
| 384 | bool "Palm T|X" |
| 385 | default y |
| 386 | depends on ARCH_PXA_PALM |
| 387 | select IWMMXT |
| 388 | select MACH_PALM27X |
| 389 | select PXA27x |
| 390 | help |
| 391 | Say Y here if you intend to run this kernel on a Palm T|X |
| 392 | handheld computer. |
| 393 | |
| 394 | config MACH_PALMZ72 |
| 395 | bool "Palm Zire 72" |
| 396 | default y |
| 397 | depends on ARCH_PXA_PALM |
| 398 | select IWMMXT |
| 399 | select MACH_PALM27X |
| 400 | select PXA27x |
| 401 | help |
| 402 | Say Y here if you intend to run this kernel on Palm Zire 72 |
| 403 | handheld computer. |
| 404 | |
| 405 | config MACH_PALMLD |
| 406 | bool "Palm LifeDrive" |
| 407 | default y |
| 408 | depends on ARCH_PXA_PALM |
| 409 | select IWMMXT |
| 410 | select MACH_PALM27X |
| 411 | select PXA27x |
| 412 | help |
| 413 | Say Y here if you intend to run this kernel on a Palm LifeDrive |
| 414 | handheld computer. |
| 415 | |
| 416 | config PALM_TREO |
| 417 | bool |
| 418 | depends on ARCH_PXA_PALM |
| 419 | |
| 420 | config MACH_CENTRO |
| 421 | bool "Palm Centro 685 (GSM)" |
| 422 | default y |
| 423 | depends on ARCH_PXA_PALM |
| 424 | select IWMMXT |
| 425 | select MACH_PALM27X |
| 426 | select PALM_TREO |
| 427 | select PXA27x |
| 428 | help |
| 429 | Say Y here if you intend to run this kernel on Palm Centro 685 (GSM) |
| 430 | smartphone. |
| 431 | |
| 432 | config MACH_TREO680 |
| 433 | bool "Palm Treo 680" |
| 434 | default y |
| 435 | depends on ARCH_PXA_PALM |
| 436 | select IWMMXT |
| 437 | select MACH_PALM27X |
| 438 | select PALM_TREO |
| 439 | select PXA27x |
| 440 | help |
| 441 | Say Y here if you intend to run this kernel on Palm Treo 680 |
| 442 | smartphone. |
| 443 | |
| 444 | config MACH_RAUMFELD_RC |
| 445 | bool "Raumfeld Controller" |
| 446 | select CPU_PXA300 |
| 447 | select POWER_SUPPLY |
| 448 | select PXA3xx |
| 449 | |
| 450 | config MACH_RAUMFELD_CONNECTOR |
| 451 | bool "Raumfeld Connector" |
| 452 | select CPU_PXA300 |
| 453 | select POWER_SUPPLY |
| 454 | select PXA3xx |
| 455 | |
| 456 | config MACH_RAUMFELD_SPEAKER |
| 457 | bool "Raumfeld Speaker" |
| 458 | select CPU_PXA300 |
| 459 | select POWER_SUPPLY |
| 460 | select PXA3xx |
| 461 | |
| 462 | config PXA_SHARPSL |
| 463 | bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models" |
| 464 | select SHARP_PARAM |
| 465 | select SHARP_SCOOP |
| 466 | help |
| 467 | Say Y here if you intend to run this kernel on a |
| 468 | Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi), |
| 469 | SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita), |
| 470 | SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa) |
| 471 | handheld computer. |
| 472 | |
| 473 | config PXA_SHARPSL_DETECT_MACH_ID |
| 474 | bool "Detect machine ID at run-time in the decompressor" |
| 475 | depends on PXA_SHARPSL |
| 476 | help |
| 477 | Say Y here if you want the zImage decompressor to detect |
| 478 | the Zaurus machine ID at run-time. For latest kexec-based |
| 479 | boot loader, this is not necessary. |
| 480 | |
| 481 | config MACH_POODLE |
| 482 | bool "Enable Sharp SL-5600 (Poodle) Support" |
| 483 | depends on PXA_SHARPSL |
| 484 | select PXA25x |
| 485 | select SHARP_LOCOMO |
| 486 | |
| 487 | config MACH_CORGI |
| 488 | bool "Enable Sharp SL-C700 (Corgi) Support" |
| 489 | depends on PXA_SHARPSL |
| 490 | select PXA25x |
| 491 | select PXA_SHARP_C7xx |
| 492 | |
| 493 | config MACH_SHEPHERD |
| 494 | bool "Enable Sharp SL-C750 (Shepherd) Support" |
| 495 | depends on PXA_SHARPSL |
| 496 | select PXA25x |
| 497 | select PXA_SHARP_C7xx |
| 498 | |
| 499 | config MACH_HUSKY |
| 500 | bool "Enable Sharp SL-C760 (Husky) Support" |
| 501 | depends on PXA_SHARPSL |
| 502 | select PXA25x |
| 503 | select PXA_SHARP_C7xx |
| 504 | |
| 505 | config MACH_AKITA |
| 506 | bool "Enable Sharp SL-1000 (Akita) Support" |
| 507 | depends on PXA_SHARPSL |
| 508 | select I2C |
| 509 | select I2C_PXA |
| 510 | select MACH_SPITZ |
| 511 | select PXA27x |
| 512 | select PXA_SHARP_Cxx00 |
| 513 | |
| 514 | config MACH_SPITZ |
| 515 | bool "Enable Sharp Zaurus SL-3000 (Spitz) Support" |
| 516 | depends on PXA_SHARPSL |
| 517 | select PXA27x |
| 518 | select PXA_SHARP_Cxx00 |
| 519 | |
| 520 | config MACH_BORZOI |
| 521 | bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support" |
| 522 | depends on PXA_SHARPSL |
| 523 | select PXA27x |
| 524 | select PXA_SHARP_Cxx00 |
| 525 | |
| 526 | config MACH_TOSA |
| 527 | bool "Enable Sharp SL-6000x (Tosa) Support" |
| 528 | depends on PXA_SHARPSL |
| 529 | select PXA25x |
| 530 | |
| 531 | config TOSA_BT |
| 532 | tristate "Control the state of built-in bluetooth chip on Sharp SL-6000" |
| 533 | depends on MACH_TOSA && NET |
| 534 | select RFKILL |
| 535 | help |
| 536 | This is a simple driver that is able to control |
| 537 | the state of built in bluetooth chip on tosa. |
| 538 | |
| 539 | config TOSA_USE_EXT_KEYCODES |
| 540 | bool "Tosa keyboard: use extended keycodes" |
| 541 | depends on MACH_TOSA |
| 542 | default n |
| 543 | help |
| 544 | Say Y here to enable the tosa keyboard driver to generate extended |
| 545 | (>= 127) keycodes. Be aware, that they can't be correctly interpreted |
| 546 | by either console keyboard driver or by Kdrive keybd driver. |
| 547 | |
| 548 | Say Y only if you know, what you are doing! |
| 549 | |
| 550 | config MACH_ICONTROL |
| 551 | bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM" |
| 552 | select CPU_PXA320 |
| 553 | select PXA3xx |
| 554 | |
| 555 | config ARCH_PXA_ESERIES |
| 556 | bool "PXA based Toshiba e-series PDAs" |
| 557 | select FB_W100 |
| 558 | select PXA25x |
| 559 | |
| 560 | config MACH_E330 |
| 561 | bool "Toshiba e330" |
| 562 | default y |
| 563 | depends on ARCH_PXA_ESERIES |
| 564 | help |
| 565 | Say Y here if you intend to run this kernel on a Toshiba |
| 566 | e330 family PDA. |
| 567 | |
| 568 | config MACH_E350 |
| 569 | bool "Toshiba e350" |
| 570 | default y |
| 571 | depends on ARCH_PXA_ESERIES |
| 572 | help |
| 573 | Say Y here if you intend to run this kernel on a Toshiba |
| 574 | e350 family PDA. |
| 575 | |
| 576 | config MACH_E740 |
| 577 | bool "Toshiba e740" |
| 578 | default y |
| 579 | depends on ARCH_PXA_ESERIES |
| 580 | help |
| 581 | Say Y here if you intend to run this kernel on a Toshiba |
| 582 | e740 family PDA. |
| 583 | |
| 584 | config MACH_E750 |
| 585 | bool "Toshiba e750" |
| 586 | default y |
| 587 | depends on ARCH_PXA_ESERIES |
| 588 | help |
| 589 | Say Y here if you intend to run this kernel on a Toshiba |
| 590 | e750 family PDA. |
| 591 | |
| 592 | config MACH_E400 |
| 593 | bool "Toshiba e400" |
| 594 | default y |
| 595 | depends on ARCH_PXA_ESERIES |
| 596 | help |
| 597 | Say Y here if you intend to run this kernel on a Toshiba |
| 598 | e400 family PDA. |
| 599 | |
| 600 | config MACH_E800 |
| 601 | bool "Toshiba e800" |
| 602 | default y |
| 603 | depends on ARCH_PXA_ESERIES |
| 604 | help |
| 605 | Say Y here if you intend to run this kernel on a Toshiba |
| 606 | e800 family PDA. |
| 607 | |
| 608 | config MACH_ZIPIT2 |
| 609 | bool "Zipit Z2 Handheld" |
| 610 | select PXA27x |
| 611 | endmenu |
| 612 | |
| 613 | config PXA25x |
| 614 | bool |
| 615 | select CPU_XSCALE |
| 616 | help |
| 617 | Select code specific to PXA21x/25x/26x variants |
| 618 | |
| 619 | config PXA27x |
| 620 | bool |
| 621 | select CPU_XSCALE |
| 622 | help |
| 623 | Select code specific to PXA27x variants |
| 624 | |
| 625 | config CPU_PXA26x |
| 626 | bool |
| 627 | select PXA25x |
| 628 | help |
| 629 | Select code specific to PXA26x (codename Dalhart) |
| 630 | |
| 631 | config PXA3xx |
| 632 | bool |
| 633 | select CPU_XSC3 |
| 634 | help |
| 635 | Select code specific to PXA3xx variants |
| 636 | |
| 637 | config CPU_PXA300 |
| 638 | bool |
| 639 | select PXA3xx |
| 640 | help |
| 641 | PXA300 (codename Monahans-L) |
| 642 | |
| 643 | config CPU_PXA310 |
| 644 | bool |
| 645 | select CPU_PXA300 |
| 646 | select PXA310_ULPI if USB_ULPI |
| 647 | help |
| 648 | PXA310 (codename Monahans-LV) |
| 649 | |
| 650 | config CPU_PXA320 |
| 651 | bool |
| 652 | select PXA3xx |
| 653 | help |
| 654 | PXA320 (codename Monahans-P) |
| 655 | |
| 656 | config CPU_PXA930 |
| 657 | bool |
| 658 | select PXA3xx |
| 659 | help |
| 660 | PXA930 (codename Tavor-P) |
| 661 | |
| 662 | config CPU_PXA935 |
| 663 | bool |
| 664 | select CPU_PXA930 |
| 665 | help |
| 666 | PXA935 (codename Tavor-P65) |
| 667 | |
| 668 | config PXA_SHARP_C7xx |
| 669 | bool |
| 670 | select SHARPSL_PM |
| 671 | help |
| 672 | Enable support for all Sharp C7xx models |
| 673 | |
| 674 | config PXA_SHARP_Cxx00 |
| 675 | bool |
| 676 | select SHARPSL_PM |
| 677 | help |
| 678 | Enable common support for Sharp Cxx00 models |
| 679 | |
| 680 | config SHARPSL_PM |
| 681 | bool |
| 682 | select APM_EMULATION |
| 683 | select SHARPSL_PM_MAX1111 |
| 684 | |
| 685 | config SHARPSL_PM_MAX1111 |
| 686 | bool |
| 687 | select HWMON |
| 688 | select SENSORS_MAX1111 |
| 689 | select SPI |
| 690 | select SPI_MASTER |
| 691 | |
| 692 | config PXA310_ULPI |
| 693 | bool |
| 694 | |
| 695 | config PXA_SYSTEMS_CPLDS |
| 696 | tristate "Motherboard cplds" |
| 697 | default ARCH_LUBBOCK || MACH_MAINSTONE |
| 698 | help |
| 699 | This driver supports the Lubbock and Mainstone multifunction chip |
| 700 | found on the pxa25x development platform system (Lubbock) and pxa27x |
| 701 | development platform system (Mainstone). This IO board supports the |
| 702 | interrupts handling, ethernet controller, flash chips, etc ... |
| 703 | |
| 704 | endif |