| 1 | /* BFD back-end for Hitachi H8/300 COFF binaries. |
| 2 | Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, |
| 3 | 2000, 2001, 2002 |
| 4 | Free Software Foundation, Inc. |
| 5 | Written by Steve Chamberlain, <sac@cygnus.com>. |
| 6 | |
| 7 | This file is part of BFD, the Binary File Descriptor library. |
| 8 | |
| 9 | This program is free software; you can redistribute it and/or modify |
| 10 | it under the terms of the GNU General Public License as published by |
| 11 | the Free Software Foundation; either version 2 of the License, or |
| 12 | (at your option) any later version. |
| 13 | |
| 14 | This program is distributed in the hope that it will be useful, |
| 15 | but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 16 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 17 | GNU General Public License for more details. |
| 18 | |
| 19 | You should have received a copy of the GNU General Public License |
| 20 | along with this program; if not, write to the Free Software |
| 21 | Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ |
| 22 | |
| 23 | #include "bfd.h" |
| 24 | #include "sysdep.h" |
| 25 | #include "libbfd.h" |
| 26 | #include "bfdlink.h" |
| 27 | #include "genlink.h" |
| 28 | #include "coff/h8300.h" |
| 29 | #include "coff/internal.h" |
| 30 | #include "libcoff.h" |
| 31 | |
| 32 | #define COFF_DEFAULT_SECTION_ALIGNMENT_POWER (1) |
| 33 | |
| 34 | /* We derive a hash table from the basic BFD hash table to |
| 35 | hold entries in the function vector. Aside from the |
| 36 | info stored by the basic hash table, we need the offset |
| 37 | of a particular entry within the hash table as well as |
| 38 | the offset where we'll add the next entry. */ |
| 39 | |
| 40 | struct funcvec_hash_entry |
| 41 | { |
| 42 | /* The basic hash table entry. */ |
| 43 | struct bfd_hash_entry root; |
| 44 | |
| 45 | /* The offset within the vectors section where |
| 46 | this entry lives. */ |
| 47 | bfd_vma offset; |
| 48 | }; |
| 49 | |
| 50 | struct funcvec_hash_table |
| 51 | { |
| 52 | /* The basic hash table. */ |
| 53 | struct bfd_hash_table root; |
| 54 | |
| 55 | bfd *abfd; |
| 56 | |
| 57 | /* Offset at which we'll add the next entry. */ |
| 58 | unsigned int offset; |
| 59 | }; |
| 60 | |
| 61 | static struct bfd_hash_entry * |
| 62 | funcvec_hash_newfunc |
| 63 | PARAMS ((struct bfd_hash_entry *, struct bfd_hash_table *, const char *)); |
| 64 | |
| 65 | static bfd_boolean |
| 66 | funcvec_hash_table_init |
| 67 | PARAMS ((struct funcvec_hash_table *, bfd *, |
| 68 | struct bfd_hash_entry *(*) (struct bfd_hash_entry *, |
| 69 | struct bfd_hash_table *, |
| 70 | const char *))); |
| 71 | |
| 72 | static bfd_reloc_status_type special |
| 73 | PARAMS ((bfd *, arelent *, asymbol *, PTR, asection *, bfd *, char **)); |
| 74 | static int select_reloc |
| 75 | PARAMS ((reloc_howto_type *)); |
| 76 | static void rtype2howto |
| 77 | PARAMS ((arelent *, struct internal_reloc *)); |
| 78 | static void reloc_processing |
| 79 | PARAMS ((arelent *, struct internal_reloc *, asymbol **, bfd *, asection *)); |
| 80 | static bfd_boolean h8300_symbol_address_p |
| 81 | PARAMS ((bfd *, asection *, bfd_vma)); |
| 82 | static int h8300_reloc16_estimate |
| 83 | PARAMS ((bfd *, asection *, arelent *, unsigned int, |
| 84 | struct bfd_link_info *)); |
| 85 | static void h8300_reloc16_extra_cases |
| 86 | PARAMS ((bfd *, struct bfd_link_info *, struct bfd_link_order *, arelent *, |
| 87 | bfd_byte *, unsigned int *, unsigned int *)); |
| 88 | static bfd_boolean h8300_bfd_link_add_symbols |
| 89 | PARAMS ((bfd *, struct bfd_link_info *)); |
| 90 | |
| 91 | /* To lookup a value in the function vector hash table. */ |
| 92 | #define funcvec_hash_lookup(table, string, create, copy) \ |
| 93 | ((struct funcvec_hash_entry *) \ |
| 94 | bfd_hash_lookup (&(table)->root, (string), (create), (copy))) |
| 95 | |
| 96 | /* The derived h8300 COFF linker table. Note it's derived from |
| 97 | the generic linker hash table, not the COFF backend linker hash |
| 98 | table! We use this to attach additional data structures we |
| 99 | need while linking on the h8300. */ |
| 100 | struct h8300_coff_link_hash_table { |
| 101 | /* The main hash table. */ |
| 102 | struct generic_link_hash_table root; |
| 103 | |
| 104 | /* Section for the vectors table. This gets attached to a |
| 105 | random input bfd, we keep it here for easy access. */ |
| 106 | asection *vectors_sec; |
| 107 | |
| 108 | /* Hash table of the functions we need to enter into the function |
| 109 | vector. */ |
| 110 | struct funcvec_hash_table *funcvec_hash_table; |
| 111 | }; |
| 112 | |
| 113 | static struct bfd_link_hash_table *h8300_coff_link_hash_table_create |
| 114 | PARAMS ((bfd *)); |
| 115 | |
| 116 | /* Get the H8/300 COFF linker hash table from a link_info structure. */ |
| 117 | |
| 118 | #define h8300_coff_hash_table(p) \ |
| 119 | ((struct h8300_coff_link_hash_table *) ((coff_hash_table (p)))) |
| 120 | |
| 121 | /* Initialize fields within a funcvec hash table entry. Called whenever |
| 122 | a new entry is added to the funcvec hash table. */ |
| 123 | |
| 124 | static struct bfd_hash_entry * |
| 125 | funcvec_hash_newfunc (entry, gen_table, string) |
| 126 | struct bfd_hash_entry *entry; |
| 127 | struct bfd_hash_table *gen_table; |
| 128 | const char *string; |
| 129 | { |
| 130 | struct funcvec_hash_entry *ret; |
| 131 | struct funcvec_hash_table *table; |
| 132 | |
| 133 | ret = (struct funcvec_hash_entry *) entry; |
| 134 | table = (struct funcvec_hash_table *) gen_table; |
| 135 | |
| 136 | /* Allocate the structure if it has not already been allocated by a |
| 137 | subclass. */ |
| 138 | if (ret == NULL) |
| 139 | ret = ((struct funcvec_hash_entry *) |
| 140 | bfd_hash_allocate (gen_table, |
| 141 | sizeof (struct funcvec_hash_entry))); |
| 142 | if (ret == NULL) |
| 143 | return NULL; |
| 144 | |
| 145 | /* Call the allocation method of the superclass. */ |
| 146 | ret = ((struct funcvec_hash_entry *) |
| 147 | bfd_hash_newfunc ((struct bfd_hash_entry *) ret, gen_table, string)); |
| 148 | |
| 149 | if (ret == NULL) |
| 150 | return NULL; |
| 151 | |
| 152 | /* Note where this entry will reside in the function vector table. */ |
| 153 | ret->offset = table->offset; |
| 154 | |
| 155 | /* Bump the offset at which we store entries in the function |
| 156 | vector. We'd like to bump up the size of the vectors section, |
| 157 | but it's not easily available here. */ |
| 158 | if (bfd_get_mach (table->abfd) == bfd_mach_h8300) |
| 159 | table->offset += 2; |
| 160 | else if (bfd_get_mach (table->abfd) == bfd_mach_h8300h |
| 161 | || bfd_get_mach (table->abfd) == bfd_mach_h8300s) |
| 162 | table->offset += 4; |
| 163 | else |
| 164 | return NULL; |
| 165 | |
| 166 | /* Everything went OK. */ |
| 167 | return (struct bfd_hash_entry *) ret; |
| 168 | } |
| 169 | |
| 170 | /* Initialize the function vector hash table. */ |
| 171 | |
| 172 | static bfd_boolean |
| 173 | funcvec_hash_table_init (table, abfd, newfunc) |
| 174 | struct funcvec_hash_table *table; |
| 175 | bfd *abfd; |
| 176 | struct bfd_hash_entry *(*newfunc) |
| 177 | PARAMS ((struct bfd_hash_entry *, struct bfd_hash_table *, |
| 178 | const char *)); |
| 179 | { |
| 180 | /* Initialize our local fields, then call the generic initialization |
| 181 | routine. */ |
| 182 | table->offset = 0; |
| 183 | table->abfd = abfd; |
| 184 | return (bfd_hash_table_init (&table->root, newfunc)); |
| 185 | } |
| 186 | |
| 187 | /* Create the derived linker hash table. We use a derived hash table |
| 188 | basically to hold "static" information during an h8/300 coff link |
| 189 | without using static variables. */ |
| 190 | |
| 191 | static struct bfd_link_hash_table * |
| 192 | h8300_coff_link_hash_table_create (abfd) |
| 193 | bfd *abfd; |
| 194 | { |
| 195 | struct h8300_coff_link_hash_table *ret; |
| 196 | bfd_size_type amt = sizeof (struct h8300_coff_link_hash_table); |
| 197 | |
| 198 | ret = (struct h8300_coff_link_hash_table *) bfd_malloc (amt); |
| 199 | if (ret == NULL) |
| 200 | return NULL; |
| 201 | if (!_bfd_link_hash_table_init (&ret->root.root, abfd, |
| 202 | _bfd_generic_link_hash_newfunc)) |
| 203 | { |
| 204 | free (ret); |
| 205 | return NULL; |
| 206 | } |
| 207 | |
| 208 | /* Initialize our data. */ |
| 209 | ret->vectors_sec = NULL; |
| 210 | ret->funcvec_hash_table = NULL; |
| 211 | |
| 212 | /* OK. Everything's intialized, return the base pointer. */ |
| 213 | return &ret->root.root; |
| 214 | } |
| 215 | |
| 216 | /* Special handling for H8/300 relocs. |
| 217 | We only come here for pcrel stuff and return normally if not an -r link. |
| 218 | When doing -r, we can't do any arithmetic for the pcrel stuff, because |
| 219 | the code in reloc.c assumes that we can manipulate the targets of |
| 220 | the pcrel branches. This isn't so, since the H8/300 can do relaxing, |
| 221 | which means that the gap after the instruction may not be enough to |
| 222 | contain the offset required for the branch, so we have to use only |
| 223 | the addend until the final link. */ |
| 224 | |
| 225 | static bfd_reloc_status_type |
| 226 | special (abfd, reloc_entry, symbol, data, input_section, output_bfd, |
| 227 | error_message) |
| 228 | bfd *abfd ATTRIBUTE_UNUSED; |
| 229 | arelent *reloc_entry ATTRIBUTE_UNUSED; |
| 230 | asymbol *symbol ATTRIBUTE_UNUSED; |
| 231 | PTR data ATTRIBUTE_UNUSED; |
| 232 | asection *input_section ATTRIBUTE_UNUSED; |
| 233 | bfd *output_bfd; |
| 234 | char **error_message ATTRIBUTE_UNUSED; |
| 235 | { |
| 236 | if (output_bfd == (bfd *) NULL) |
| 237 | return bfd_reloc_continue; |
| 238 | |
| 239 | /* Adjust the reloc address to that in the output section. */ |
| 240 | reloc_entry->address += input_section->output_offset; |
| 241 | return bfd_reloc_ok; |
| 242 | } |
| 243 | |
| 244 | static reloc_howto_type howto_table[] = { |
| 245 | HOWTO (R_RELBYTE, 0, 0, 8, FALSE, 0, complain_overflow_bitfield, special, "8", FALSE, 0x000000ff, 0x000000ff, FALSE), |
| 246 | HOWTO (R_RELWORD, 0, 1, 16, FALSE, 0, complain_overflow_bitfield, special, "16", FALSE, 0x0000ffff, 0x0000ffff, FALSE), |
| 247 | HOWTO (R_RELLONG, 0, 2, 32, FALSE, 0, complain_overflow_bitfield, special, "32", FALSE, 0xffffffff, 0xffffffff, FALSE), |
| 248 | HOWTO (R_PCRBYTE, 0, 0, 8, TRUE, 0, complain_overflow_signed, special, "DISP8", FALSE, 0x000000ff, 0x000000ff, TRUE), |
| 249 | HOWTO (R_PCRWORD, 0, 1, 16, TRUE, 0, complain_overflow_signed, special, "DISP16", FALSE, 0x0000ffff, 0x0000ffff, TRUE), |
| 250 | HOWTO (R_PCRLONG, 0, 2, 32, TRUE, 0, complain_overflow_signed, special, "DISP32", FALSE, 0xffffffff, 0xffffffff, TRUE), |
| 251 | HOWTO (R_MOV16B1, 0, 1, 16, FALSE, 0, complain_overflow_bitfield, special, "relaxable mov.b:16", FALSE, 0x0000ffff, 0x0000ffff, FALSE), |
| 252 | HOWTO (R_MOV16B2, 0, 1, 8, FALSE, 0, complain_overflow_bitfield, special, "relaxed mov.b:16", FALSE, 0x000000ff, 0x000000ff, FALSE), |
| 253 | HOWTO (R_JMP1, 0, 1, 16, FALSE, 0, complain_overflow_bitfield, special, "16/pcrel", FALSE, 0x0000ffff, 0x0000ffff, FALSE), |
| 254 | HOWTO (R_JMP2, 0, 0, 8, FALSE, 0, complain_overflow_bitfield, special, "pcrecl/16", FALSE, 0x000000ff, 0x000000ff, FALSE), |
| 255 | HOWTO (R_JMPL1, 0, 2, 32, FALSE, 0, complain_overflow_bitfield, special, "24/pcrell", FALSE, 0x00ffffff, 0x00ffffff, FALSE), |
| 256 | HOWTO (R_JMPL2, 0, 0, 8, FALSE, 0, complain_overflow_bitfield, special, "pc8/24", FALSE, 0x000000ff, 0x000000ff, FALSE), |
| 257 | HOWTO (R_MOV24B1, 0, 1, 32, FALSE, 0, complain_overflow_bitfield, special, "relaxable mov.b:24", FALSE, 0xffffffff, 0xffffffff, FALSE), |
| 258 | HOWTO (R_MOV24B2, 0, 1, 8, FALSE, 0, complain_overflow_bitfield, special, "relaxed mov.b:24", FALSE, 0x0000ffff, 0x0000ffff, FALSE), |
| 259 | |
| 260 | /* An indirect reference to a function. This causes the function's address |
| 261 | to be added to the function vector in lo-mem and puts the address of |
| 262 | the function vector's entry in the jsr instruction. */ |
| 263 | HOWTO (R_MEM_INDIRECT, 0, 0, 8, FALSE, 0, complain_overflow_bitfield, special, "8/indirect", FALSE, 0x000000ff, 0x000000ff, FALSE), |
| 264 | |
| 265 | /* Internal reloc for relaxing. This is created when a 16bit pc-relative |
| 266 | branch is turned into an 8bit pc-relative branch. */ |
| 267 | HOWTO (R_PCRWORD_B, 0, 0, 8, TRUE, 0, complain_overflow_bitfield, special, "relaxed bCC:16", FALSE, 0x000000ff, 0x000000ff, FALSE), |
| 268 | |
| 269 | HOWTO (R_MOVL1, 0, 2, 32, FALSE, 0, complain_overflow_bitfield,special, "32/24 relaxable move", FALSE, 0xffffffff, 0xffffffff, FALSE), |
| 270 | |
| 271 | HOWTO (R_MOVL2, 0, 1, 16, FALSE, 0, complain_overflow_bitfield, special, "32/24 relaxed move", FALSE, 0x0000ffff, 0x0000ffff, FALSE), |
| 272 | |
| 273 | HOWTO (R_BCC_INV, 0, 0, 8, TRUE, 0, complain_overflow_signed, special, "DISP8 inverted", FALSE, 0x000000ff, 0x000000ff, TRUE), |
| 274 | |
| 275 | HOWTO (R_JMP_DEL, 0, 0, 8, TRUE, 0, complain_overflow_signed, special, "Deleted jump", FALSE, 0x000000ff, 0x000000ff, TRUE), |
| 276 | }; |
| 277 | |
| 278 | /* Turn a howto into a reloc number. */ |
| 279 | |
| 280 | #define SELECT_RELOC(x,howto) \ |
| 281 | { x.r_type = select_reloc (howto); } |
| 282 | |
| 283 | #define BADMAG(x) (H8300BADMAG (x) && H8300HBADMAG (x) && H8300SBADMAG (x)) |
| 284 | #define H8300 1 /* Customize coffcode.h */ |
| 285 | #define __A_MAGIC_SET__ |
| 286 | |
| 287 | /* Code to swap in the reloc. */ |
| 288 | #define SWAP_IN_RELOC_OFFSET H_GET_32 |
| 289 | #define SWAP_OUT_RELOC_OFFSET H_PUT_32 |
| 290 | #define SWAP_OUT_RELOC_EXTRA(abfd, src, dst) \ |
| 291 | dst->r_stuff[0] = 'S'; \ |
| 292 | dst->r_stuff[1] = 'C'; |
| 293 | |
| 294 | static int |
| 295 | select_reloc (howto) |
| 296 | reloc_howto_type *howto; |
| 297 | { |
| 298 | return howto->type; |
| 299 | } |
| 300 | |
| 301 | /* Code to turn a r_type into a howto ptr, uses the above howto table. */ |
| 302 | |
| 303 | static void |
| 304 | rtype2howto (internal, dst) |
| 305 | arelent *internal; |
| 306 | struct internal_reloc *dst; |
| 307 | { |
| 308 | switch (dst->r_type) |
| 309 | { |
| 310 | case R_RELBYTE: |
| 311 | internal->howto = howto_table + 0; |
| 312 | break; |
| 313 | case R_RELWORD: |
| 314 | internal->howto = howto_table + 1; |
| 315 | break; |
| 316 | case R_RELLONG: |
| 317 | internal->howto = howto_table + 2; |
| 318 | break; |
| 319 | case R_PCRBYTE: |
| 320 | internal->howto = howto_table + 3; |
| 321 | break; |
| 322 | case R_PCRWORD: |
| 323 | internal->howto = howto_table + 4; |
| 324 | break; |
| 325 | case R_PCRLONG: |
| 326 | internal->howto = howto_table + 5; |
| 327 | break; |
| 328 | case R_MOV16B1: |
| 329 | internal->howto = howto_table + 6; |
| 330 | break; |
| 331 | case R_MOV16B2: |
| 332 | internal->howto = howto_table + 7; |
| 333 | break; |
| 334 | case R_JMP1: |
| 335 | internal->howto = howto_table + 8; |
| 336 | break; |
| 337 | case R_JMP2: |
| 338 | internal->howto = howto_table + 9; |
| 339 | break; |
| 340 | case R_JMPL1: |
| 341 | internal->howto = howto_table + 10; |
| 342 | break; |
| 343 | case R_JMPL2: |
| 344 | internal->howto = howto_table + 11; |
| 345 | break; |
| 346 | case R_MOV24B1: |
| 347 | internal->howto = howto_table + 12; |
| 348 | break; |
| 349 | case R_MOV24B2: |
| 350 | internal->howto = howto_table + 13; |
| 351 | break; |
| 352 | case R_MEM_INDIRECT: |
| 353 | internal->howto = howto_table + 14; |
| 354 | break; |
| 355 | case R_PCRWORD_B: |
| 356 | internal->howto = howto_table + 15; |
| 357 | break; |
| 358 | case R_MOVL1: |
| 359 | internal->howto = howto_table + 16; |
| 360 | break; |
| 361 | case R_MOVL2: |
| 362 | internal->howto = howto_table + 17; |
| 363 | break; |
| 364 | case R_BCC_INV: |
| 365 | internal->howto = howto_table + 18; |
| 366 | break; |
| 367 | case R_JMP_DEL: |
| 368 | internal->howto = howto_table + 19; |
| 369 | break; |
| 370 | default: |
| 371 | abort (); |
| 372 | break; |
| 373 | } |
| 374 | } |
| 375 | |
| 376 | #define RTYPE2HOWTO(internal, relocentry) rtype2howto (internal, relocentry) |
| 377 | |
| 378 | /* Perform any necessary magic to the addend in a reloc entry. */ |
| 379 | |
| 380 | #define CALC_ADDEND(abfd, symbol, ext_reloc, cache_ptr) \ |
| 381 | cache_ptr->addend = ext_reloc.r_offset; |
| 382 | |
| 383 | #define RELOC_PROCESSING(relent,reloc,symbols,abfd,section) \ |
| 384 | reloc_processing (relent, reloc, symbols, abfd, section) |
| 385 | |
| 386 | static void |
| 387 | reloc_processing (relent, reloc, symbols, abfd, section) |
| 388 | arelent *relent; |
| 389 | struct internal_reloc *reloc; |
| 390 | asymbol **symbols; |
| 391 | bfd *abfd; |
| 392 | asection *section; |
| 393 | { |
| 394 | relent->address = reloc->r_vaddr; |
| 395 | rtype2howto (relent, reloc); |
| 396 | |
| 397 | if (((int) reloc->r_symndx) > 0) |
| 398 | { |
| 399 | relent->sym_ptr_ptr = symbols + obj_convert (abfd)[reloc->r_symndx]; |
| 400 | } |
| 401 | else |
| 402 | { |
| 403 | relent->sym_ptr_ptr = bfd_abs_section_ptr->symbol_ptr_ptr; |
| 404 | } |
| 405 | |
| 406 | relent->addend = reloc->r_offset; |
| 407 | |
| 408 | relent->address -= section->vma; |
| 409 | #if 0 |
| 410 | relent->section = 0; |
| 411 | #endif |
| 412 | } |
| 413 | |
| 414 | static bfd_boolean |
| 415 | h8300_symbol_address_p (abfd, input_section, address) |
| 416 | bfd *abfd; |
| 417 | asection *input_section; |
| 418 | bfd_vma address; |
| 419 | { |
| 420 | asymbol **s; |
| 421 | |
| 422 | s = _bfd_generic_link_get_symbols (abfd); |
| 423 | BFD_ASSERT (s != (asymbol **) NULL); |
| 424 | |
| 425 | /* Search all the symbols for one in INPUT_SECTION with |
| 426 | address ADDRESS. */ |
| 427 | while (*s) |
| 428 | { |
| 429 | asymbol *p = *s; |
| 430 | if (p->section == input_section |
| 431 | && (input_section->output_section->vma |
| 432 | + input_section->output_offset |
| 433 | + p->value) == address) |
| 434 | return TRUE; |
| 435 | s++; |
| 436 | } |
| 437 | return FALSE; |
| 438 | } |
| 439 | |
| 440 | /* If RELOC represents a relaxable instruction/reloc, change it into |
| 441 | the relaxed reloc, notify the linker that symbol addresses |
| 442 | have changed (bfd_perform_slip) and return how much the current |
| 443 | section has shrunk by. |
| 444 | |
| 445 | FIXME: Much of this code has knowledge of the ordering of entries |
| 446 | in the howto table. This needs to be fixed. */ |
| 447 | |
| 448 | static int |
| 449 | h8300_reloc16_estimate (abfd, input_section, reloc, shrink, link_info) |
| 450 | bfd *abfd; |
| 451 | asection *input_section; |
| 452 | arelent *reloc; |
| 453 | unsigned int shrink; |
| 454 | struct bfd_link_info *link_info; |
| 455 | { |
| 456 | bfd_vma value; |
| 457 | bfd_vma dot; |
| 458 | bfd_vma gap; |
| 459 | static asection *last_input_section = NULL; |
| 460 | static arelent *last_reloc = NULL; |
| 461 | |
| 462 | /* The address of the thing to be relocated will have moved back by |
| 463 | the size of the shrink - but we don't change reloc->address here, |
| 464 | since we need it to know where the relocation lives in the source |
| 465 | uncooked section. */ |
| 466 | bfd_vma address = reloc->address - shrink; |
| 467 | |
| 468 | if (input_section != last_input_section) |
| 469 | last_reloc = NULL; |
| 470 | |
| 471 | /* Only examine the relocs which might be relaxable. */ |
| 472 | switch (reloc->howto->type) |
| 473 | { |
| 474 | /* This is the 16/24 bit absolute branch which could become an 8 bit |
| 475 | pc-relative branch. */ |
| 476 | case R_JMP1: |
| 477 | case R_JMPL1: |
| 478 | /* Get the address of the target of this branch. */ |
| 479 | value = bfd_coff_reloc16_get_value (reloc, link_info, input_section); |
| 480 | |
| 481 | /* Get the address of the next instruction (not the reloc). */ |
| 482 | dot = (input_section->output_section->vma |
| 483 | + input_section->output_offset + address); |
| 484 | |
| 485 | /* Adjust for R_JMP1 vs R_JMPL1. */ |
| 486 | dot += (reloc->howto->type == R_JMP1 ? 1 : 2); |
| 487 | |
| 488 | /* Compute the distance from this insn to the branch target. */ |
| 489 | gap = value - dot; |
| 490 | |
| 491 | /* If the distance is within -128..+128 inclusive, then we can relax |
| 492 | this jump. +128 is valid since the target will move two bytes |
| 493 | closer if we do relax this branch. */ |
| 494 | if ((int) gap >= -128 && (int) gap <= 128) |
| 495 | { |
| 496 | bfd_byte code; |
| 497 | |
| 498 | if (!bfd_get_section_contents (abfd, input_section, & code, |
| 499 | reloc->address, 1)) |
| 500 | break; |
| 501 | code = bfd_get_8 (abfd, & code); |
| 502 | |
| 503 | /* It's possible we may be able to eliminate this branch entirely; |
| 504 | if the previous instruction is a branch around this instruction, |
| 505 | and there's no label at this instruction, then we can reverse |
| 506 | the condition on the previous branch and eliminate this jump. |
| 507 | |
| 508 | original: new: |
| 509 | bCC lab1 bCC' lab2 |
| 510 | jmp lab2 |
| 511 | lab1: lab1: |
| 512 | |
| 513 | This saves 4 bytes instead of two, and should be relatively |
| 514 | common. |
| 515 | |
| 516 | Only perform this optimisation for jumps (code 0x5a) not |
| 517 | subroutine calls, as otherwise it could transform: |
| 518 | |
| 519 | mov.w r0,r0 |
| 520 | beq .L1 |
| 521 | jsr @_bar |
| 522 | .L1: rts |
| 523 | _bar: rts |
| 524 | into: |
| 525 | mov.w r0,r0 |
| 526 | bne _bar |
| 527 | rts |
| 528 | _bar: rts |
| 529 | |
| 530 | which changes the call (jsr) into a branch (bne). */ |
| 531 | if (code == 0x5a |
| 532 | && gap <= 126 |
| 533 | && last_reloc |
| 534 | && last_reloc->howto->type == R_PCRBYTE) |
| 535 | { |
| 536 | bfd_vma last_value; |
| 537 | last_value = bfd_coff_reloc16_get_value (last_reloc, link_info, |
| 538 | input_section) + 1; |
| 539 | |
| 540 | if (last_value == dot + 2 |
| 541 | && last_reloc->address + 1 == reloc->address |
| 542 | && !h8300_symbol_address_p (abfd, input_section, dot - 2)) |
| 543 | { |
| 544 | reloc->howto = howto_table + 19; |
| 545 | last_reloc->howto = howto_table + 18; |
| 546 | last_reloc->sym_ptr_ptr = reloc->sym_ptr_ptr; |
| 547 | last_reloc->addend = reloc->addend; |
| 548 | shrink += 4; |
| 549 | bfd_perform_slip (abfd, 4, input_section, address); |
| 550 | break; |
| 551 | } |
| 552 | } |
| 553 | |
| 554 | /* Change the reloc type. */ |
| 555 | reloc->howto = reloc->howto + 1; |
| 556 | |
| 557 | /* This shrinks this section by two bytes. */ |
| 558 | shrink += 2; |
| 559 | bfd_perform_slip (abfd, 2, input_section, address); |
| 560 | } |
| 561 | break; |
| 562 | |
| 563 | /* This is the 16 bit pc-relative branch which could become an 8 bit |
| 564 | pc-relative branch. */ |
| 565 | case R_PCRWORD: |
| 566 | /* Get the address of the target of this branch, add one to the value |
| 567 | because the addend field in PCrel jumps is off by -1. */ |
| 568 | value = bfd_coff_reloc16_get_value (reloc, link_info, input_section) + 1; |
| 569 | |
| 570 | /* Get the address of the next instruction if we were to relax. */ |
| 571 | dot = input_section->output_section->vma + |
| 572 | input_section->output_offset + address; |
| 573 | |
| 574 | /* Compute the distance from this insn to the branch target. */ |
| 575 | gap = value - dot; |
| 576 | |
| 577 | /* If the distance is within -128..+128 inclusive, then we can relax |
| 578 | this jump. +128 is valid since the target will move two bytes |
| 579 | closer if we do relax this branch. */ |
| 580 | if ((int) gap >= -128 && (int) gap <= 128) |
| 581 | { |
| 582 | /* Change the reloc type. */ |
| 583 | reloc->howto = howto_table + 15; |
| 584 | |
| 585 | /* This shrinks this section by two bytes. */ |
| 586 | shrink += 2; |
| 587 | bfd_perform_slip (abfd, 2, input_section, address); |
| 588 | } |
| 589 | break; |
| 590 | |
| 591 | /* This is a 16 bit absolute address in a mov.b insn, which can |
| 592 | become an 8 bit absolute address if it's in the right range. */ |
| 593 | case R_MOV16B1: |
| 594 | /* Get the address of the data referenced by this mov.b insn. */ |
| 595 | value = bfd_coff_reloc16_get_value (reloc, link_info, input_section); |
| 596 | |
| 597 | /* The address is in 0xff00..0xffff inclusive on the h8300 or |
| 598 | 0xffff00..0xffffff inclusive on the h8300h, then we can |
| 599 | relax this mov.b */ |
| 600 | if ((bfd_get_mach (abfd) == bfd_mach_h8300 |
| 601 | && value >= 0xff00 |
| 602 | && value <= 0xffff) |
| 603 | || ((bfd_get_mach (abfd) == bfd_mach_h8300h |
| 604 | || bfd_get_mach (abfd) == bfd_mach_h8300s) |
| 605 | && value >= 0xffff00 |
| 606 | && value <= 0xffffff)) |
| 607 | { |
| 608 | /* Change the reloc type. */ |
| 609 | reloc->howto = reloc->howto + 1; |
| 610 | |
| 611 | /* This shrinks this section by two bytes. */ |
| 612 | shrink += 2; |
| 613 | bfd_perform_slip (abfd, 2, input_section, address); |
| 614 | } |
| 615 | break; |
| 616 | |
| 617 | /* Similarly for a 24 bit absolute address in a mov.b. Note that |
| 618 | if we can't relax this into an 8 bit absolute, we'll fall through |
| 619 | and try to relax it into a 16bit absolute. */ |
| 620 | case R_MOV24B1: |
| 621 | /* Get the address of the data referenced by this mov.b insn. */ |
| 622 | value = bfd_coff_reloc16_get_value (reloc, link_info, input_section); |
| 623 | |
| 624 | /* The address is in 0xffff00..0xffffff inclusive on the h8300h, |
| 625 | then we can relax this mov.b */ |
| 626 | if ((bfd_get_mach (abfd) == bfd_mach_h8300h |
| 627 | || bfd_get_mach (abfd) == bfd_mach_h8300s) |
| 628 | && value >= 0xffff00 |
| 629 | && value <= 0xffffff) |
| 630 | { |
| 631 | /* Change the reloc type. */ |
| 632 | reloc->howto = reloc->howto + 1; |
| 633 | |
| 634 | /* This shrinks this section by four bytes. */ |
| 635 | shrink += 4; |
| 636 | bfd_perform_slip (abfd, 4, input_section, address); |
| 637 | |
| 638 | /* Done with this reloc. */ |
| 639 | break; |
| 640 | } |
| 641 | |
| 642 | /* FALLTHROUGH and try to turn the 32/24 bit reloc into a 16 bit |
| 643 | reloc. */ |
| 644 | |
| 645 | /* This is a 24/32 bit absolute address in a mov insn, which can |
| 646 | become an 16 bit absolute address if it's in the right range. */ |
| 647 | case R_MOVL1: |
| 648 | /* Get the address of the data referenced by this mov insn. */ |
| 649 | value = bfd_coff_reloc16_get_value (reloc, link_info, input_section); |
| 650 | |
| 651 | /* If this address is in 0x0000..0x7fff inclusive or |
| 652 | 0xff8000..0xffffff inclusive, then it can be relaxed. */ |
| 653 | if (value <= 0x7fff || value >= 0xff8000) |
| 654 | { |
| 655 | /* Change the reloc type. */ |
| 656 | reloc->howto = howto_table + 17; |
| 657 | |
| 658 | /* This shrinks this section by two bytes. */ |
| 659 | shrink += 2; |
| 660 | bfd_perform_slip (abfd, 2, input_section, address); |
| 661 | } |
| 662 | break; |
| 663 | |
| 664 | /* No other reloc types represent relaxing opportunities. */ |
| 665 | default: |
| 666 | break; |
| 667 | } |
| 668 | |
| 669 | last_reloc = reloc; |
| 670 | last_input_section = input_section; |
| 671 | return shrink; |
| 672 | } |
| 673 | |
| 674 | /* Handle relocations for the H8/300, including relocs for relaxed |
| 675 | instructions. |
| 676 | |
| 677 | FIXME: Not all relocations check for overflow! */ |
| 678 | |
| 679 | static void |
| 680 | h8300_reloc16_extra_cases (abfd, link_info, link_order, reloc, data, src_ptr, |
| 681 | dst_ptr) |
| 682 | bfd *abfd; |
| 683 | struct bfd_link_info *link_info; |
| 684 | struct bfd_link_order *link_order; |
| 685 | arelent *reloc; |
| 686 | bfd_byte *data; |
| 687 | unsigned int *src_ptr; |
| 688 | unsigned int *dst_ptr; |
| 689 | { |
| 690 | unsigned int src_address = *src_ptr; |
| 691 | unsigned int dst_address = *dst_ptr; |
| 692 | asection *input_section = link_order->u.indirect.section; |
| 693 | bfd_vma value; |
| 694 | bfd_vma dot; |
| 695 | int gap, tmp; |
| 696 | |
| 697 | switch (reloc->howto->type) |
| 698 | { |
| 699 | /* Generic 8bit pc-relative relocation. */ |
| 700 | case R_PCRBYTE: |
| 701 | /* Get the address of the target of this branch. */ |
| 702 | value = bfd_coff_reloc16_get_value (reloc, link_info, input_section); |
| 703 | |
| 704 | dot = (link_order->offset |
| 705 | + dst_address |
| 706 | + link_order->u.indirect.section->output_section->vma); |
| 707 | |
| 708 | gap = value - dot; |
| 709 | |
| 710 | /* Sanity check. */ |
| 711 | if (gap < -128 || gap > 126) |
| 712 | { |
| 713 | if (! ((*link_info->callbacks->reloc_overflow) |
| 714 | (link_info, bfd_asymbol_name (*reloc->sym_ptr_ptr), |
| 715 | reloc->howto->name, reloc->addend, input_section->owner, |
| 716 | input_section, reloc->address))) |
| 717 | abort (); |
| 718 | } |
| 719 | |
| 720 | /* Everything looks OK. Apply the relocation and update the |
| 721 | src/dst address appropriately. */ |
| 722 | |
| 723 | bfd_put_8 (abfd, gap, data + dst_address); |
| 724 | dst_address++; |
| 725 | src_address++; |
| 726 | |
| 727 | /* All done. */ |
| 728 | break; |
| 729 | |
| 730 | /* Generic 16bit pc-relative relocation. */ |
| 731 | case R_PCRWORD: |
| 732 | /* Get the address of the target of this branch. */ |
| 733 | value = bfd_coff_reloc16_get_value (reloc, link_info, input_section); |
| 734 | |
| 735 | /* Get the address of the instruction (not the reloc). */ |
| 736 | dot = (link_order->offset |
| 737 | + dst_address |
| 738 | + link_order->u.indirect.section->output_section->vma + 1); |
| 739 | |
| 740 | gap = value - dot; |
| 741 | |
| 742 | /* Sanity check. */ |
| 743 | if (gap > 32766 || gap < -32768) |
| 744 | { |
| 745 | if (! ((*link_info->callbacks->reloc_overflow) |
| 746 | (link_info, bfd_asymbol_name (*reloc->sym_ptr_ptr), |
| 747 | reloc->howto->name, reloc->addend, input_section->owner, |
| 748 | input_section, reloc->address))) |
| 749 | abort (); |
| 750 | } |
| 751 | |
| 752 | /* Everything looks OK. Apply the relocation and update the |
| 753 | src/dst address appropriately. */ |
| 754 | |
| 755 | bfd_put_16 (abfd, (bfd_vma) gap, data + dst_address); |
| 756 | dst_address += 2; |
| 757 | src_address += 2; |
| 758 | |
| 759 | /* All done. */ |
| 760 | break; |
| 761 | |
| 762 | /* Generic 8bit absolute relocation. */ |
| 763 | case R_RELBYTE: |
| 764 | /* Get the address of the object referenced by this insn. */ |
| 765 | value = bfd_coff_reloc16_get_value (reloc, link_info, input_section); |
| 766 | |
| 767 | /* Sanity check. */ |
| 768 | if (value <= 0xff |
| 769 | || (value >= 0x0000ff00 && value <= 0x0000ffff) |
| 770 | || (value >= 0x00ffff00 && value <= 0x00ffffff) |
| 771 | || (value >= 0xffffff00 && value <= 0xffffffff)) |
| 772 | { |
| 773 | /* Everything looks OK. Apply the relocation and update the |
| 774 | src/dst address appropriately. */ |
| 775 | |
| 776 | bfd_put_8 (abfd, value & 0xff, data + dst_address); |
| 777 | dst_address += 1; |
| 778 | src_address += 1; |
| 779 | } |
| 780 | else |
| 781 | { |
| 782 | if (! ((*link_info->callbacks->reloc_overflow) |
| 783 | (link_info, bfd_asymbol_name (*reloc->sym_ptr_ptr), |
| 784 | reloc->howto->name, reloc->addend, input_section->owner, |
| 785 | input_section, reloc->address))) |
| 786 | abort (); |
| 787 | } |
| 788 | |
| 789 | /* All done. */ |
| 790 | break; |
| 791 | |
| 792 | /* Various simple 16bit absolute relocations. */ |
| 793 | case R_MOV16B1: |
| 794 | case R_JMP1: |
| 795 | case R_RELWORD: |
| 796 | value = bfd_coff_reloc16_get_value (reloc, link_info, input_section); |
| 797 | bfd_put_16 (abfd, value, data + dst_address); |
| 798 | dst_address += 2; |
| 799 | src_address += 2; |
| 800 | break; |
| 801 | |
| 802 | /* Various simple 24/32bit absolute relocations. */ |
| 803 | case R_MOV24B1: |
| 804 | case R_MOVL1: |
| 805 | case R_RELLONG: |
| 806 | /* Get the address of the target of this branch. */ |
| 807 | value = bfd_coff_reloc16_get_value (reloc, link_info, input_section); |
| 808 | bfd_put_32 (abfd, value, data + dst_address); |
| 809 | dst_address += 4; |
| 810 | src_address += 4; |
| 811 | break; |
| 812 | |
| 813 | /* Another 24/32bit absolute relocation. */ |
| 814 | case R_JMPL1: |
| 815 | /* Get the address of the target of this branch. */ |
| 816 | value = bfd_coff_reloc16_get_value (reloc, link_info, input_section); |
| 817 | |
| 818 | value = ((value & 0x00ffffff) |
| 819 | | (bfd_get_32 (abfd, data + src_address) & 0xff000000)); |
| 820 | bfd_put_32 (abfd, value, data + dst_address); |
| 821 | dst_address += 4; |
| 822 | src_address += 4; |
| 823 | break; |
| 824 | |
| 825 | /* A 16bit abolute relocation that was formerlly a 24/32bit |
| 826 | absolute relocation. */ |
| 827 | case R_MOVL2: |
| 828 | value = bfd_coff_reloc16_get_value (reloc, link_info, input_section); |
| 829 | |
| 830 | /* Sanity check. */ |
| 831 | if (value <= 0x7fff || value >= 0xff8000) |
| 832 | { |
| 833 | /* Insert the 16bit value into the proper location. */ |
| 834 | bfd_put_16 (abfd, value, data + dst_address); |
| 835 | |
| 836 | /* Fix the opcode. For all the move insns, we simply |
| 837 | need to turn off bit 0x20 in the previous byte. */ |
| 838 | data[dst_address - 1] &= ~0x20; |
| 839 | dst_address += 2; |
| 840 | src_address += 4; |
| 841 | } |
| 842 | else |
| 843 | { |
| 844 | if (! ((*link_info->callbacks->reloc_overflow) |
| 845 | (link_info, bfd_asymbol_name (*reloc->sym_ptr_ptr), |
| 846 | reloc->howto->name, reloc->addend, input_section->owner, |
| 847 | input_section, reloc->address))) |
| 848 | abort (); |
| 849 | } |
| 850 | break; |
| 851 | |
| 852 | /* A 16bit absolute branch that is now an 8-bit pc-relative branch. */ |
| 853 | case R_JMP2: |
| 854 | /* Get the address of the target of this branch. */ |
| 855 | value = bfd_coff_reloc16_get_value (reloc, link_info, input_section); |
| 856 | |
| 857 | /* Get the address of the next instruction. */ |
| 858 | dot = (link_order->offset |
| 859 | + dst_address |
| 860 | + link_order->u.indirect.section->output_section->vma + 1); |
| 861 | |
| 862 | gap = value - dot; |
| 863 | |
| 864 | /* Sanity check. */ |
| 865 | if (gap < -128 || gap > 126) |
| 866 | { |
| 867 | if (! ((*link_info->callbacks->reloc_overflow) |
| 868 | (link_info, bfd_asymbol_name (*reloc->sym_ptr_ptr), |
| 869 | reloc->howto->name, reloc->addend, input_section->owner, |
| 870 | input_section, reloc->address))) |
| 871 | abort (); |
| 872 | } |
| 873 | |
| 874 | /* Now fix the instruction itself. */ |
| 875 | switch (data[dst_address - 1]) |
| 876 | { |
| 877 | case 0x5e: |
| 878 | /* jsr -> bsr */ |
| 879 | bfd_put_8 (abfd, 0x55, data + dst_address - 1); |
| 880 | break; |
| 881 | case 0x5a: |
| 882 | /* jmp ->bra */ |
| 883 | bfd_put_8 (abfd, 0x40, data + dst_address - 1); |
| 884 | break; |
| 885 | |
| 886 | default: |
| 887 | abort (); |
| 888 | } |
| 889 | |
| 890 | /* Write out the 8bit value. */ |
| 891 | bfd_put_8 (abfd, gap, data + dst_address); |
| 892 | |
| 893 | dst_address += 1; |
| 894 | src_address += 3; |
| 895 | |
| 896 | break; |
| 897 | |
| 898 | /* A 16bit pc-relative branch that is now an 8-bit pc-relative branch. */ |
| 899 | case R_PCRWORD_B: |
| 900 | /* Get the address of the target of this branch. */ |
| 901 | value = bfd_coff_reloc16_get_value (reloc, link_info, input_section); |
| 902 | |
| 903 | /* Get the address of the instruction (not the reloc). */ |
| 904 | dot = (link_order->offset |
| 905 | + dst_address |
| 906 | + link_order->u.indirect.section->output_section->vma - 1); |
| 907 | |
| 908 | gap = value - dot; |
| 909 | |
| 910 | /* Sanity check. */ |
| 911 | if (gap < -128 || gap > 126) |
| 912 | { |
| 913 | if (! ((*link_info->callbacks->reloc_overflow) |
| 914 | (link_info, bfd_asymbol_name (*reloc->sym_ptr_ptr), |
| 915 | reloc->howto->name, reloc->addend, input_section->owner, |
| 916 | input_section, reloc->address))) |
| 917 | abort (); |
| 918 | } |
| 919 | |
| 920 | /* Now fix the instruction. */ |
| 921 | switch (data[dst_address - 2]) |
| 922 | { |
| 923 | case 0x58: |
| 924 | /* bCC:16 -> bCC:8 */ |
| 925 | /* Get the condition code from the original insn. */ |
| 926 | tmp = data[dst_address - 1]; |
| 927 | tmp &= 0xf0; |
| 928 | tmp >>= 4; |
| 929 | |
| 930 | /* Now or in the high nibble of the opcode. */ |
| 931 | tmp |= 0x40; |
| 932 | |
| 933 | /* Write it. */ |
| 934 | bfd_put_8 (abfd, tmp, data + dst_address - 2); |
| 935 | break; |
| 936 | |
| 937 | case 0x5c: |
| 938 | /* bsr:16 -> bsr:8 */ |
| 939 | bfd_put_8 (abfd, 0x55, data + dst_address - 2); |
| 940 | break; |
| 941 | |
| 942 | default: |
| 943 | abort (); |
| 944 | } |
| 945 | |
| 946 | /* Output the target. */ |
| 947 | bfd_put_8 (abfd, gap, data + dst_address - 1); |
| 948 | |
| 949 | /* We don't advance dst_address -- the 8bit reloc is applied at |
| 950 | dst_address - 1, so the next insn should begin at dst_address. */ |
| 951 | src_address += 2; |
| 952 | |
| 953 | break; |
| 954 | |
| 955 | /* Similarly for a 24bit absolute that is now 8 bits. */ |
| 956 | case R_JMPL2: |
| 957 | /* Get the address of the target of this branch. */ |
| 958 | value = bfd_coff_reloc16_get_value (reloc, link_info, input_section); |
| 959 | |
| 960 | /* Get the address of the instruction (not the reloc). */ |
| 961 | dot = (link_order->offset |
| 962 | + dst_address |
| 963 | + link_order->u.indirect.section->output_section->vma + 2); |
| 964 | |
| 965 | gap = value - dot; |
| 966 | |
| 967 | /* Fix the instruction. */ |
| 968 | switch (data[src_address]) |
| 969 | { |
| 970 | case 0x5e: |
| 971 | /* jsr -> bsr */ |
| 972 | bfd_put_8 (abfd, 0x55, data + dst_address); |
| 973 | break; |
| 974 | case 0x5a: |
| 975 | /* jmp ->bra */ |
| 976 | bfd_put_8 (abfd, 0x40, data + dst_address); |
| 977 | break; |
| 978 | default: |
| 979 | abort (); |
| 980 | } |
| 981 | |
| 982 | bfd_put_8 (abfd, gap, data + dst_address + 1); |
| 983 | dst_address += 2; |
| 984 | src_address += 4; |
| 985 | |
| 986 | break; |
| 987 | |
| 988 | /* A 16bit absolute mov.b that is now an 8bit absolute mov.b. */ |
| 989 | case R_MOV16B2: |
| 990 | value = bfd_coff_reloc16_get_value (reloc, link_info, input_section); |
| 991 | |
| 992 | /* Sanity check. */ |
| 993 | if (data[dst_address - 2] != 0x6a) |
| 994 | abort (); |
| 995 | |
| 996 | /* Fix up the opcode. */ |
| 997 | switch (data[src_address - 1] & 0xf0) |
| 998 | { |
| 999 | case 0x00: |
| 1000 | data[dst_address - 2] = (data[src_address - 1] & 0xf) | 0x20; |
| 1001 | break; |
| 1002 | case 0x80: |
| 1003 | data[dst_address - 2] = (data[src_address - 1] & 0xf) | 0x30; |
| 1004 | break; |
| 1005 | default: |
| 1006 | abort (); |
| 1007 | } |
| 1008 | |
| 1009 | bfd_put_8 (abfd, value & 0xff, data + dst_address - 1); |
| 1010 | src_address += 2; |
| 1011 | break; |
| 1012 | |
| 1013 | /* Similarly for a 24bit mov.b */ |
| 1014 | case R_MOV24B2: |
| 1015 | value = bfd_coff_reloc16_get_value (reloc, link_info, input_section); |
| 1016 | |
| 1017 | /* Sanity check. */ |
| 1018 | if (data[dst_address - 2] != 0x6a) |
| 1019 | abort (); |
| 1020 | |
| 1021 | /* Fix up the opcode. */ |
| 1022 | switch (data[src_address - 1] & 0xf0) |
| 1023 | { |
| 1024 | case 0x20: |
| 1025 | data[dst_address - 2] = (data[src_address - 1] & 0xf) | 0x20; |
| 1026 | break; |
| 1027 | case 0xa0: |
| 1028 | data[dst_address - 2] = (data[src_address - 1] & 0xf) | 0x30; |
| 1029 | break; |
| 1030 | default: |
| 1031 | abort (); |
| 1032 | } |
| 1033 | |
| 1034 | bfd_put_8 (abfd, value & 0xff, data + dst_address - 1); |
| 1035 | src_address += 4; |
| 1036 | break; |
| 1037 | |
| 1038 | case R_BCC_INV: |
| 1039 | /* Get the address of the target of this branch. */ |
| 1040 | value = bfd_coff_reloc16_get_value (reloc, link_info, input_section); |
| 1041 | |
| 1042 | dot = (link_order->offset |
| 1043 | + dst_address |
| 1044 | + link_order->u.indirect.section->output_section->vma) + 1; |
| 1045 | |
| 1046 | gap = value - dot; |
| 1047 | |
| 1048 | /* Sanity check. */ |
| 1049 | if (gap < -128 || gap > 126) |
| 1050 | { |
| 1051 | if (! ((*link_info->callbacks->reloc_overflow) |
| 1052 | (link_info, bfd_asymbol_name (*reloc->sym_ptr_ptr), |
| 1053 | reloc->howto->name, reloc->addend, input_section->owner, |
| 1054 | input_section, reloc->address))) |
| 1055 | abort (); |
| 1056 | } |
| 1057 | |
| 1058 | /* Everything looks OK. Fix the condition in the instruction, apply |
| 1059 | the relocation, and update the src/dst address appropriately. */ |
| 1060 | |
| 1061 | bfd_put_8 (abfd, bfd_get_8 (abfd, data + dst_address - 1) ^ 1, |
| 1062 | data + dst_address - 1); |
| 1063 | bfd_put_8 (abfd, gap, data + dst_address); |
| 1064 | dst_address++; |
| 1065 | src_address++; |
| 1066 | |
| 1067 | /* All done. */ |
| 1068 | break; |
| 1069 | |
| 1070 | case R_JMP_DEL: |
| 1071 | src_address += 4; |
| 1072 | break; |
| 1073 | |
| 1074 | /* An 8bit memory indirect instruction (jmp/jsr). |
| 1075 | |
| 1076 | There's several things that need to be done to handle |
| 1077 | this relocation. |
| 1078 | |
| 1079 | If this is a reloc against the absolute symbol, then |
| 1080 | we should handle it just R_RELBYTE. Likewise if it's |
| 1081 | for a symbol with a value ge 0 and le 0xff. |
| 1082 | |
| 1083 | Otherwise it's a jump/call through the function vector, |
| 1084 | and the linker is expected to set up the function vector |
| 1085 | and put the right value into the jump/call instruction. */ |
| 1086 | case R_MEM_INDIRECT: |
| 1087 | { |
| 1088 | /* We need to find the symbol so we can determine it's |
| 1089 | address in the function vector table. */ |
| 1090 | asymbol *symbol; |
| 1091 | const char *name; |
| 1092 | struct funcvec_hash_table *ftab; |
| 1093 | struct funcvec_hash_entry *h; |
| 1094 | asection *vectors_sec = h8300_coff_hash_table (link_info)->vectors_sec; |
| 1095 | |
| 1096 | /* First see if this is a reloc against the absolute symbol |
| 1097 | or against a symbol with a nonnegative value <= 0xff. */ |
| 1098 | symbol = *(reloc->sym_ptr_ptr); |
| 1099 | value = bfd_coff_reloc16_get_value (reloc, link_info, input_section); |
| 1100 | if (symbol == bfd_abs_section_ptr->symbol |
| 1101 | || value <= 0xff) |
| 1102 | { |
| 1103 | /* This should be handled in a manner very similar to |
| 1104 | R_RELBYTES. If the value is in range, then just slam |
| 1105 | the value into the right location. Else trigger a |
| 1106 | reloc overflow callback. */ |
| 1107 | if (value <= 0xff) |
| 1108 | { |
| 1109 | bfd_put_8 (abfd, value, data + dst_address); |
| 1110 | dst_address += 1; |
| 1111 | src_address += 1; |
| 1112 | } |
| 1113 | else |
| 1114 | { |
| 1115 | if (! ((*link_info->callbacks->reloc_overflow) |
| 1116 | (link_info, bfd_asymbol_name (*reloc->sym_ptr_ptr), |
| 1117 | reloc->howto->name, reloc->addend, input_section->owner, |
| 1118 | input_section, reloc->address))) |
| 1119 | abort (); |
| 1120 | } |
| 1121 | break; |
| 1122 | } |
| 1123 | |
| 1124 | /* This is a jump/call through a function vector, and we're |
| 1125 | expected to create the function vector ourselves. |
| 1126 | |
| 1127 | First look up this symbol in the linker hash table -- we need |
| 1128 | the derived linker symbol which holds this symbol's index |
| 1129 | in the function vector. */ |
| 1130 | name = symbol->name; |
| 1131 | if (symbol->flags & BSF_LOCAL) |
| 1132 | { |
| 1133 | char *new_name = bfd_malloc ((bfd_size_type) strlen (name) + 9); |
| 1134 | if (new_name == NULL) |
| 1135 | abort (); |
| 1136 | |
| 1137 | strcpy (new_name, name); |
| 1138 | sprintf (new_name + strlen (name), "_%08x", |
| 1139 | (int) symbol->section); |
| 1140 | name = new_name; |
| 1141 | } |
| 1142 | |
| 1143 | ftab = h8300_coff_hash_table (link_info)->funcvec_hash_table; |
| 1144 | h = funcvec_hash_lookup (ftab, name, FALSE, FALSE); |
| 1145 | |
| 1146 | /* This shouldn't ever happen. If it does that means we've got |
| 1147 | data corruption of some kind. Aborting seems like a reasonable |
| 1148 | think to do here. */ |
| 1149 | if (h == NULL || vectors_sec == NULL) |
| 1150 | abort (); |
| 1151 | |
| 1152 | /* Place the address of the function vector entry into the |
| 1153 | reloc's address. */ |
| 1154 | bfd_put_8 (abfd, |
| 1155 | vectors_sec->output_offset + h->offset, |
| 1156 | data + dst_address); |
| 1157 | |
| 1158 | dst_address++; |
| 1159 | src_address++; |
| 1160 | |
| 1161 | /* Now create an entry in the function vector itself. */ |
| 1162 | if (bfd_get_mach (input_section->owner) == bfd_mach_h8300) |
| 1163 | bfd_put_16 (abfd, |
| 1164 | bfd_coff_reloc16_get_value (reloc, |
| 1165 | link_info, |
| 1166 | input_section), |
| 1167 | vectors_sec->contents + h->offset); |
| 1168 | else if (bfd_get_mach (input_section->owner) == bfd_mach_h8300h |
| 1169 | || bfd_get_mach (input_section->owner) == bfd_mach_h8300s) |
| 1170 | bfd_put_32 (abfd, |
| 1171 | bfd_coff_reloc16_get_value (reloc, |
| 1172 | link_info, |
| 1173 | input_section), |
| 1174 | vectors_sec->contents + h->offset); |
| 1175 | else |
| 1176 | abort (); |
| 1177 | |
| 1178 | /* Gross. We've already written the contents of the vector section |
| 1179 | before we get here... So we write it again with the new data. */ |
| 1180 | bfd_set_section_contents (vectors_sec->output_section->owner, |
| 1181 | vectors_sec->output_section, |
| 1182 | vectors_sec->contents, |
| 1183 | (file_ptr) vectors_sec->output_offset, |
| 1184 | vectors_sec->_raw_size); |
| 1185 | break; |
| 1186 | } |
| 1187 | |
| 1188 | default: |
| 1189 | abort (); |
| 1190 | break; |
| 1191 | |
| 1192 | } |
| 1193 | |
| 1194 | *src_ptr = src_address; |
| 1195 | *dst_ptr = dst_address; |
| 1196 | } |
| 1197 | |
| 1198 | /* Routine for the h8300 linker. |
| 1199 | |
| 1200 | This routine is necessary to handle the special R_MEM_INDIRECT |
| 1201 | relocs on the h8300. It's responsible for generating a vectors |
| 1202 | section and attaching it to an input bfd as well as sizing |
| 1203 | the vectors section. It also creates our vectors hash table. |
| 1204 | |
| 1205 | It uses the generic linker routines to actually add the symbols. |
| 1206 | from this BFD to the bfd linker hash table. It may add a few |
| 1207 | selected static symbols to the bfd linker hash table. */ |
| 1208 | |
| 1209 | static bfd_boolean |
| 1210 | h8300_bfd_link_add_symbols (abfd, info) |
| 1211 | bfd *abfd; |
| 1212 | struct bfd_link_info *info; |
| 1213 | { |
| 1214 | asection *sec; |
| 1215 | struct funcvec_hash_table *funcvec_hash_table; |
| 1216 | bfd_size_type amt; |
| 1217 | |
| 1218 | /* If we haven't created a vectors section, do so now. */ |
| 1219 | if (!h8300_coff_hash_table (info)->vectors_sec) |
| 1220 | { |
| 1221 | flagword flags; |
| 1222 | |
| 1223 | /* Make sure the appropriate flags are set, including SEC_IN_MEMORY. */ |
| 1224 | flags = (SEC_ALLOC | SEC_LOAD |
| 1225 | | SEC_HAS_CONTENTS | SEC_IN_MEMORY | SEC_READONLY); |
| 1226 | h8300_coff_hash_table (info)->vectors_sec = bfd_make_section (abfd, |
| 1227 | ".vectors"); |
| 1228 | |
| 1229 | /* If the section wasn't created, or we couldn't set the flags, |
| 1230 | quit quickly now, rather than dieing a painful death later. */ |
| 1231 | if (! h8300_coff_hash_table (info)->vectors_sec |
| 1232 | || ! bfd_set_section_flags (abfd, |
| 1233 | h8300_coff_hash_table(info)->vectors_sec, |
| 1234 | flags)) |
| 1235 | return FALSE; |
| 1236 | |
| 1237 | /* Also create the vector hash table. */ |
| 1238 | amt = sizeof (struct funcvec_hash_table); |
| 1239 | funcvec_hash_table = (struct funcvec_hash_table *) bfd_alloc (abfd, amt); |
| 1240 | |
| 1241 | if (!funcvec_hash_table) |
| 1242 | return FALSE; |
| 1243 | |
| 1244 | /* And initialize the funcvec hash table. */ |
| 1245 | if (!funcvec_hash_table_init (funcvec_hash_table, abfd, |
| 1246 | funcvec_hash_newfunc)) |
| 1247 | { |
| 1248 | bfd_release (abfd, funcvec_hash_table); |
| 1249 | return FALSE; |
| 1250 | } |
| 1251 | |
| 1252 | /* Store away a pointer to the funcvec hash table. */ |
| 1253 | h8300_coff_hash_table (info)->funcvec_hash_table = funcvec_hash_table; |
| 1254 | } |
| 1255 | |
| 1256 | /* Load up the function vector hash table. */ |
| 1257 | funcvec_hash_table = h8300_coff_hash_table (info)->funcvec_hash_table; |
| 1258 | |
| 1259 | /* Add the symbols using the generic code. */ |
| 1260 | _bfd_generic_link_add_symbols (abfd, info); |
| 1261 | |
| 1262 | /* Now scan the relocs for all the sections in this bfd; create |
| 1263 | additional space in the .vectors section as needed. */ |
| 1264 | for (sec = abfd->sections; sec; sec = sec->next) |
| 1265 | { |
| 1266 | long reloc_size, reloc_count, i; |
| 1267 | asymbol **symbols; |
| 1268 | arelent **relocs; |
| 1269 | |
| 1270 | /* Suck in the relocs, symbols & canonicalize them. */ |
| 1271 | reloc_size = bfd_get_reloc_upper_bound (abfd, sec); |
| 1272 | if (reloc_size <= 0) |
| 1273 | continue; |
| 1274 | |
| 1275 | relocs = (arelent **) bfd_malloc ((bfd_size_type) reloc_size); |
| 1276 | if (!relocs) |
| 1277 | return FALSE; |
| 1278 | |
| 1279 | /* The symbols should have been read in by _bfd_generic link_add_symbols |
| 1280 | call abovec, so we can cheat and use the pointer to them that was |
| 1281 | saved in the above call. */ |
| 1282 | symbols = _bfd_generic_link_get_symbols(abfd); |
| 1283 | reloc_count = bfd_canonicalize_reloc (abfd, sec, relocs, symbols); |
| 1284 | if (reloc_count <= 0) |
| 1285 | { |
| 1286 | free (relocs); |
| 1287 | continue; |
| 1288 | } |
| 1289 | |
| 1290 | /* Now walk through all the relocations in this section. */ |
| 1291 | for (i = 0; i < reloc_count; i++) |
| 1292 | { |
| 1293 | arelent *reloc = relocs[i]; |
| 1294 | asymbol *symbol = *(reloc->sym_ptr_ptr); |
| 1295 | const char *name; |
| 1296 | |
| 1297 | /* We've got an indirect reloc. See if we need to add it |
| 1298 | to the function vector table. At this point, we have |
| 1299 | to add a new entry for each unique symbol referenced |
| 1300 | by an R_MEM_INDIRECT relocation except for a reloc |
| 1301 | against the absolute section symbol. */ |
| 1302 | if (reloc->howto->type == R_MEM_INDIRECT |
| 1303 | && symbol != bfd_abs_section_ptr->symbol) |
| 1304 | |
| 1305 | { |
| 1306 | struct funcvec_hash_table *ftab; |
| 1307 | struct funcvec_hash_entry *h; |
| 1308 | |
| 1309 | name = symbol->name; |
| 1310 | if (symbol->flags & BSF_LOCAL) |
| 1311 | { |
| 1312 | char *new_name; |
| 1313 | |
| 1314 | new_name = bfd_malloc ((bfd_size_type) strlen (name) + 9); |
| 1315 | if (new_name == NULL) |
| 1316 | abort (); |
| 1317 | |
| 1318 | strcpy (new_name, name); |
| 1319 | sprintf (new_name + strlen (name), "_%08x", |
| 1320 | (int) symbol->section); |
| 1321 | name = new_name; |
| 1322 | } |
| 1323 | |
| 1324 | /* Look this symbol up in the function vector hash table. */ |
| 1325 | ftab = h8300_coff_hash_table (info)->funcvec_hash_table; |
| 1326 | h = funcvec_hash_lookup (ftab, name, FALSE, FALSE); |
| 1327 | |
| 1328 | /* If this symbol isn't already in the hash table, add |
| 1329 | it and bump up the size of the hash table. */ |
| 1330 | if (h == NULL) |
| 1331 | { |
| 1332 | h = funcvec_hash_lookup (ftab, name, TRUE, TRUE); |
| 1333 | if (h == NULL) |
| 1334 | { |
| 1335 | free (relocs); |
| 1336 | return FALSE; |
| 1337 | } |
| 1338 | |
| 1339 | /* Bump the size of the vectors section. Each vector |
| 1340 | takes 2 bytes on the h8300 and 4 bytes on the h8300h. */ |
| 1341 | if (bfd_get_mach (abfd) == bfd_mach_h8300) |
| 1342 | h8300_coff_hash_table (info)->vectors_sec->_raw_size += 2; |
| 1343 | else if (bfd_get_mach (abfd) == bfd_mach_h8300h |
| 1344 | || bfd_get_mach (abfd) == bfd_mach_h8300s) |
| 1345 | h8300_coff_hash_table (info)->vectors_sec->_raw_size += 4; |
| 1346 | } |
| 1347 | } |
| 1348 | } |
| 1349 | |
| 1350 | /* We're done with the relocations, release them. */ |
| 1351 | free (relocs); |
| 1352 | } |
| 1353 | |
| 1354 | /* Now actually allocate some space for the function vector. It's |
| 1355 | wasteful to do this more than once, but this is easier. */ |
| 1356 | sec = h8300_coff_hash_table (info)->vectors_sec; |
| 1357 | if (sec->_raw_size != 0) |
| 1358 | { |
| 1359 | /* Free the old contents. */ |
| 1360 | if (sec->contents) |
| 1361 | free (sec->contents); |
| 1362 | |
| 1363 | /* Allocate new contents. */ |
| 1364 | sec->contents = bfd_malloc (sec->_raw_size); |
| 1365 | } |
| 1366 | |
| 1367 | return TRUE; |
| 1368 | } |
| 1369 | |
| 1370 | #define coff_reloc16_extra_cases h8300_reloc16_extra_cases |
| 1371 | #define coff_reloc16_estimate h8300_reloc16_estimate |
| 1372 | #define coff_bfd_link_add_symbols h8300_bfd_link_add_symbols |
| 1373 | #define coff_bfd_link_hash_table_create h8300_coff_link_hash_table_create |
| 1374 | |
| 1375 | #define COFF_LONG_FILENAMES |
| 1376 | #include "coffcode.h" |
| 1377 | |
| 1378 | #undef coff_bfd_get_relocated_section_contents |
| 1379 | #undef coff_bfd_relax_section |
| 1380 | #define coff_bfd_get_relocated_section_contents \ |
| 1381 | bfd_coff_reloc16_get_relocated_section_contents |
| 1382 | #define coff_bfd_relax_section bfd_coff_reloc16_relax_section |
| 1383 | |
| 1384 | CREATE_BIG_COFF_TARGET_VEC (h8300coff_vec, "coff-h8300", BFD_IS_RELAXABLE, 0, '_', NULL) |