| 1 | /* BFD support for handling relocation entries. |
| 2 | Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, |
| 3 | 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 |
| 4 | Free Software Foundation, Inc. |
| 5 | Written by Cygnus Support. |
| 6 | |
| 7 | This file is part of BFD, the Binary File Descriptor library. |
| 8 | |
| 9 | This program is free software; you can redistribute it and/or modify |
| 10 | it under the terms of the GNU General Public License as published by |
| 11 | the Free Software Foundation; either version 3 of the License, or |
| 12 | (at your option) any later version. |
| 13 | |
| 14 | This program is distributed in the hope that it will be useful, |
| 15 | but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 16 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 17 | GNU General Public License for more details. |
| 18 | |
| 19 | You should have received a copy of the GNU General Public License |
| 20 | along with this program; if not, write to the Free Software |
| 21 | Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, |
| 22 | MA 02110-1301, USA. */ |
| 23 | |
| 24 | /* |
| 25 | SECTION |
| 26 | Relocations |
| 27 | |
| 28 | BFD maintains relocations in much the same way it maintains |
| 29 | symbols: they are left alone until required, then read in |
| 30 | en-masse and translated into an internal form. A common |
| 31 | routine <<bfd_perform_relocation>> acts upon the |
| 32 | canonical form to do the fixup. |
| 33 | |
| 34 | Relocations are maintained on a per section basis, |
| 35 | while symbols are maintained on a per BFD basis. |
| 36 | |
| 37 | All that a back end has to do to fit the BFD interface is to create |
| 38 | a <<struct reloc_cache_entry>> for each relocation |
| 39 | in a particular section, and fill in the right bits of the structures. |
| 40 | |
| 41 | @menu |
| 42 | @* typedef arelent:: |
| 43 | @* howto manager:: |
| 44 | @end menu |
| 45 | |
| 46 | */ |
| 47 | |
| 48 | /* DO compile in the reloc_code name table from libbfd.h. */ |
| 49 | #define _BFD_MAKE_TABLE_bfd_reloc_code_real |
| 50 | |
| 51 | #include "sysdep.h" |
| 52 | #include "bfd.h" |
| 53 | #include "bfdlink.h" |
| 54 | #include "libbfd.h" |
| 55 | /* |
| 56 | DOCDD |
| 57 | INODE |
| 58 | typedef arelent, howto manager, Relocations, Relocations |
| 59 | |
| 60 | SUBSECTION |
| 61 | typedef arelent |
| 62 | |
| 63 | This is the structure of a relocation entry: |
| 64 | |
| 65 | CODE_FRAGMENT |
| 66 | . |
| 67 | .typedef enum bfd_reloc_status |
| 68 | .{ |
| 69 | . {* No errors detected. *} |
| 70 | . bfd_reloc_ok, |
| 71 | . |
| 72 | . {* The relocation was performed, but there was an overflow. *} |
| 73 | . bfd_reloc_overflow, |
| 74 | . |
| 75 | . {* The address to relocate was not within the section supplied. *} |
| 76 | . bfd_reloc_outofrange, |
| 77 | . |
| 78 | . {* Used by special functions. *} |
| 79 | . bfd_reloc_continue, |
| 80 | . |
| 81 | . {* Unsupported relocation size requested. *} |
| 82 | . bfd_reloc_notsupported, |
| 83 | . |
| 84 | . {* Unused. *} |
| 85 | . bfd_reloc_other, |
| 86 | . |
| 87 | . {* The symbol to relocate against was undefined. *} |
| 88 | . bfd_reloc_undefined, |
| 89 | . |
| 90 | . {* The relocation was performed, but may not be ok - presently |
| 91 | . generated only when linking i960 coff files with i960 b.out |
| 92 | . symbols. If this type is returned, the error_message argument |
| 93 | . to bfd_perform_relocation will be set. *} |
| 94 | . bfd_reloc_dangerous |
| 95 | . } |
| 96 | . bfd_reloc_status_type; |
| 97 | . |
| 98 | . |
| 99 | .typedef struct reloc_cache_entry |
| 100 | .{ |
| 101 | . {* A pointer into the canonical table of pointers. *} |
| 102 | . struct bfd_symbol **sym_ptr_ptr; |
| 103 | . |
| 104 | . {* offset in section. *} |
| 105 | . bfd_size_type address; |
| 106 | . |
| 107 | . {* addend for relocation value. *} |
| 108 | . bfd_vma addend; |
| 109 | . |
| 110 | . {* Pointer to how to perform the required relocation. *} |
| 111 | . reloc_howto_type *howto; |
| 112 | . |
| 113 | .} |
| 114 | .arelent; |
| 115 | . |
| 116 | */ |
| 117 | |
| 118 | /* |
| 119 | DESCRIPTION |
| 120 | |
| 121 | Here is a description of each of the fields within an <<arelent>>: |
| 122 | |
| 123 | o <<sym_ptr_ptr>> |
| 124 | |
| 125 | The symbol table pointer points to a pointer to the symbol |
| 126 | associated with the relocation request. It is the pointer |
| 127 | into the table returned by the back end's |
| 128 | <<canonicalize_symtab>> action. @xref{Symbols}. The symbol is |
| 129 | referenced through a pointer to a pointer so that tools like |
| 130 | the linker can fix up all the symbols of the same name by |
| 131 | modifying only one pointer. The relocation routine looks in |
| 132 | the symbol and uses the base of the section the symbol is |
| 133 | attached to and the value of the symbol as the initial |
| 134 | relocation offset. If the symbol pointer is zero, then the |
| 135 | section provided is looked up. |
| 136 | |
| 137 | o <<address>> |
| 138 | |
| 139 | The <<address>> field gives the offset in bytes from the base of |
| 140 | the section data which owns the relocation record to the first |
| 141 | byte of relocatable information. The actual data relocated |
| 142 | will be relative to this point; for example, a relocation |
| 143 | type which modifies the bottom two bytes of a four byte word |
| 144 | would not touch the first byte pointed to in a big endian |
| 145 | world. |
| 146 | |
| 147 | o <<addend>> |
| 148 | |
| 149 | The <<addend>> is a value provided by the back end to be added (!) |
| 150 | to the relocation offset. Its interpretation is dependent upon |
| 151 | the howto. For example, on the 68k the code: |
| 152 | |
| 153 | | char foo[]; |
| 154 | | main() |
| 155 | | { |
| 156 | | return foo[0x12345678]; |
| 157 | | } |
| 158 | |
| 159 | Could be compiled into: |
| 160 | |
| 161 | | linkw fp,#-4 |
| 162 | | moveb @@#12345678,d0 |
| 163 | | extbl d0 |
| 164 | | unlk fp |
| 165 | | rts |
| 166 | |
| 167 | This could create a reloc pointing to <<foo>>, but leave the |
| 168 | offset in the data, something like: |
| 169 | |
| 170 | |RELOCATION RECORDS FOR [.text]: |
| 171 | |offset type value |
| 172 | |00000006 32 _foo |
| 173 | | |
| 174 | |00000000 4e56 fffc ; linkw fp,#-4 |
| 175 | |00000004 1039 1234 5678 ; moveb @@#12345678,d0 |
| 176 | |0000000a 49c0 ; extbl d0 |
| 177 | |0000000c 4e5e ; unlk fp |
| 178 | |0000000e 4e75 ; rts |
| 179 | |
| 180 | Using coff and an 88k, some instructions don't have enough |
| 181 | space in them to represent the full address range, and |
| 182 | pointers have to be loaded in two parts. So you'd get something like: |
| 183 | |
| 184 | | or.u r13,r0,hi16(_foo+0x12345678) |
| 185 | | ld.b r2,r13,lo16(_foo+0x12345678) |
| 186 | | jmp r1 |
| 187 | |
| 188 | This should create two relocs, both pointing to <<_foo>>, and with |
| 189 | 0x12340000 in their addend field. The data would consist of: |
| 190 | |
| 191 | |RELOCATION RECORDS FOR [.text]: |
| 192 | |offset type value |
| 193 | |00000002 HVRT16 _foo+0x12340000 |
| 194 | |00000006 LVRT16 _foo+0x12340000 |
| 195 | | |
| 196 | |00000000 5da05678 ; or.u r13,r0,0x5678 |
| 197 | |00000004 1c4d5678 ; ld.b r2,r13,0x5678 |
| 198 | |00000008 f400c001 ; jmp r1 |
| 199 | |
| 200 | The relocation routine digs out the value from the data, adds |
| 201 | it to the addend to get the original offset, and then adds the |
| 202 | value of <<_foo>>. Note that all 32 bits have to be kept around |
| 203 | somewhere, to cope with carry from bit 15 to bit 16. |
| 204 | |
| 205 | One further example is the sparc and the a.out format. The |
| 206 | sparc has a similar problem to the 88k, in that some |
| 207 | instructions don't have room for an entire offset, but on the |
| 208 | sparc the parts are created in odd sized lumps. The designers of |
| 209 | the a.out format chose to not use the data within the section |
| 210 | for storing part of the offset; all the offset is kept within |
| 211 | the reloc. Anything in the data should be ignored. |
| 212 | |
| 213 | | save %sp,-112,%sp |
| 214 | | sethi %hi(_foo+0x12345678),%g2 |
| 215 | | ldsb [%g2+%lo(_foo+0x12345678)],%i0 |
| 216 | | ret |
| 217 | | restore |
| 218 | |
| 219 | Both relocs contain a pointer to <<foo>>, and the offsets |
| 220 | contain junk. |
| 221 | |
| 222 | |RELOCATION RECORDS FOR [.text]: |
| 223 | |offset type value |
| 224 | |00000004 HI22 _foo+0x12345678 |
| 225 | |00000008 LO10 _foo+0x12345678 |
| 226 | | |
| 227 | |00000000 9de3bf90 ; save %sp,-112,%sp |
| 228 | |00000004 05000000 ; sethi %hi(_foo+0),%g2 |
| 229 | |00000008 f048a000 ; ldsb [%g2+%lo(_foo+0)],%i0 |
| 230 | |0000000c 81c7e008 ; ret |
| 231 | |00000010 81e80000 ; restore |
| 232 | |
| 233 | o <<howto>> |
| 234 | |
| 235 | The <<howto>> field can be imagined as a |
| 236 | relocation instruction. It is a pointer to a structure which |
| 237 | contains information on what to do with all of the other |
| 238 | information in the reloc record and data section. A back end |
| 239 | would normally have a relocation instruction set and turn |
| 240 | relocations into pointers to the correct structure on input - |
| 241 | but it would be possible to create each howto field on demand. |
| 242 | |
| 243 | */ |
| 244 | |
| 245 | /* |
| 246 | SUBSUBSECTION |
| 247 | <<enum complain_overflow>> |
| 248 | |
| 249 | Indicates what sort of overflow checking should be done when |
| 250 | performing a relocation. |
| 251 | |
| 252 | CODE_FRAGMENT |
| 253 | . |
| 254 | .enum complain_overflow |
| 255 | .{ |
| 256 | . {* Do not complain on overflow. *} |
| 257 | . complain_overflow_dont, |
| 258 | . |
| 259 | . {* Complain if the value overflows when considered as a signed |
| 260 | . number one bit larger than the field. ie. A bitfield of N bits |
| 261 | . is allowed to represent -2**n to 2**n-1. *} |
| 262 | . complain_overflow_bitfield, |
| 263 | . |
| 264 | . {* Complain if the value overflows when considered as a signed |
| 265 | . number. *} |
| 266 | . complain_overflow_signed, |
| 267 | . |
| 268 | . {* Complain if the value overflows when considered as an |
| 269 | . unsigned number. *} |
| 270 | . complain_overflow_unsigned |
| 271 | .}; |
| 272 | |
| 273 | */ |
| 274 | |
| 275 | /* |
| 276 | SUBSUBSECTION |
| 277 | <<reloc_howto_type>> |
| 278 | |
| 279 | The <<reloc_howto_type>> is a structure which contains all the |
| 280 | information that libbfd needs to know to tie up a back end's data. |
| 281 | |
| 282 | CODE_FRAGMENT |
| 283 | .struct bfd_symbol; {* Forward declaration. *} |
| 284 | . |
| 285 | .struct reloc_howto_struct |
| 286 | .{ |
| 287 | . {* The type field has mainly a documentary use - the back end can |
| 288 | . do what it wants with it, though normally the back end's |
| 289 | . external idea of what a reloc number is stored |
| 290 | . in this field. For example, a PC relative word relocation |
| 291 | . in a coff environment has the type 023 - because that's |
| 292 | . what the outside world calls a R_PCRWORD reloc. *} |
| 293 | . unsigned int type; |
| 294 | . |
| 295 | . {* The value the final relocation is shifted right by. This drops |
| 296 | . unwanted data from the relocation. *} |
| 297 | . unsigned int rightshift; |
| 298 | . |
| 299 | . {* The size of the item to be relocated. This is *not* a |
| 300 | . power-of-two measure. To get the number of bytes operated |
| 301 | . on by a type of relocation, use bfd_get_reloc_size. *} |
| 302 | . int size; |
| 303 | . |
| 304 | . {* The number of bits in the item to be relocated. This is used |
| 305 | . when doing overflow checking. *} |
| 306 | . unsigned int bitsize; |
| 307 | . |
| 308 | . {* Notes that the relocation is relative to the location in the |
| 309 | . data section of the addend. The relocation function will |
| 310 | . subtract from the relocation value the address of the location |
| 311 | . being relocated. *} |
| 312 | . bfd_boolean pc_relative; |
| 313 | . |
| 314 | . {* The bit position of the reloc value in the destination. |
| 315 | . The relocated value is left shifted by this amount. *} |
| 316 | . unsigned int bitpos; |
| 317 | . |
| 318 | . {* What type of overflow error should be checked for when |
| 319 | . relocating. *} |
| 320 | . enum complain_overflow complain_on_overflow; |
| 321 | . |
| 322 | . {* If this field is non null, then the supplied function is |
| 323 | . called rather than the normal function. This allows really |
| 324 | . strange relocation methods to be accommodated (e.g., i960 callj |
| 325 | . instructions). *} |
| 326 | . bfd_reloc_status_type (*special_function) |
| 327 | . (bfd *, arelent *, struct bfd_symbol *, void *, asection *, |
| 328 | . bfd *, char **); |
| 329 | . |
| 330 | . {* The textual name of the relocation type. *} |
| 331 | . char *name; |
| 332 | . |
| 333 | . {* Some formats record a relocation addend in the section contents |
| 334 | . rather than with the relocation. For ELF formats this is the |
| 335 | . distinction between USE_REL and USE_RELA (though the code checks |
| 336 | . for USE_REL == 1/0). The value of this field is TRUE if the |
| 337 | . addend is recorded with the section contents; when performing a |
| 338 | . partial link (ld -r) the section contents (the data) will be |
| 339 | . modified. The value of this field is FALSE if addends are |
| 340 | . recorded with the relocation (in arelent.addend); when performing |
| 341 | . a partial link the relocation will be modified. |
| 342 | . All relocations for all ELF USE_RELA targets should set this field |
| 343 | . to FALSE (values of TRUE should be looked on with suspicion). |
| 344 | . However, the converse is not true: not all relocations of all ELF |
| 345 | . USE_REL targets set this field to TRUE. Why this is so is peculiar |
| 346 | . to each particular target. For relocs that aren't used in partial |
| 347 | . links (e.g. GOT stuff) it doesn't matter what this is set to. *} |
| 348 | . bfd_boolean partial_inplace; |
| 349 | . |
| 350 | . {* src_mask selects the part of the instruction (or data) to be used |
| 351 | . in the relocation sum. If the target relocations don't have an |
| 352 | . addend in the reloc, eg. ELF USE_REL, src_mask will normally equal |
| 353 | . dst_mask to extract the addend from the section contents. If |
| 354 | . relocations do have an addend in the reloc, eg. ELF USE_RELA, this |
| 355 | . field should be zero. Non-zero values for ELF USE_RELA targets are |
| 356 | . bogus as in those cases the value in the dst_mask part of the |
| 357 | . section contents should be treated as garbage. *} |
| 358 | . bfd_vma src_mask; |
| 359 | . |
| 360 | . {* dst_mask selects which parts of the instruction (or data) are |
| 361 | . replaced with a relocated value. *} |
| 362 | . bfd_vma dst_mask; |
| 363 | . |
| 364 | . {* When some formats create PC relative instructions, they leave |
| 365 | . the value of the pc of the place being relocated in the offset |
| 366 | . slot of the instruction, so that a PC relative relocation can |
| 367 | . be made just by adding in an ordinary offset (e.g., sun3 a.out). |
| 368 | . Some formats leave the displacement part of an instruction |
| 369 | . empty (e.g., m88k bcs); this flag signals the fact. *} |
| 370 | . bfd_boolean pcrel_offset; |
| 371 | .}; |
| 372 | . |
| 373 | */ |
| 374 | |
| 375 | /* |
| 376 | FUNCTION |
| 377 | The HOWTO Macro |
| 378 | |
| 379 | DESCRIPTION |
| 380 | The HOWTO define is horrible and will go away. |
| 381 | |
| 382 | .#define HOWTO(C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC) \ |
| 383 | . { (unsigned) C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC } |
| 384 | |
| 385 | DESCRIPTION |
| 386 | And will be replaced with the totally magic way. But for the |
| 387 | moment, we are compatible, so do it this way. |
| 388 | |
| 389 | .#define NEWHOWTO(FUNCTION, NAME, SIZE, REL, IN) \ |
| 390 | . HOWTO (0, 0, SIZE, 0, REL, 0, complain_overflow_dont, FUNCTION, \ |
| 391 | . NAME, FALSE, 0, 0, IN) |
| 392 | . |
| 393 | |
| 394 | DESCRIPTION |
| 395 | This is used to fill in an empty howto entry in an array. |
| 396 | |
| 397 | .#define EMPTY_HOWTO(C) \ |
| 398 | . HOWTO ((C), 0, 0, 0, FALSE, 0, complain_overflow_dont, NULL, \ |
| 399 | . NULL, FALSE, 0, 0, FALSE) |
| 400 | . |
| 401 | |
| 402 | DESCRIPTION |
| 403 | Helper routine to turn a symbol into a relocation value. |
| 404 | |
| 405 | .#define HOWTO_PREPARE(relocation, symbol) \ |
| 406 | . { \ |
| 407 | . if (symbol != NULL) \ |
| 408 | . { \ |
| 409 | . if (bfd_is_com_section (symbol->section)) \ |
| 410 | . { \ |
| 411 | . relocation = 0; \ |
| 412 | . } \ |
| 413 | . else \ |
| 414 | . { \ |
| 415 | . relocation = symbol->value; \ |
| 416 | . } \ |
| 417 | . } \ |
| 418 | . } |
| 419 | . |
| 420 | */ |
| 421 | |
| 422 | /* |
| 423 | FUNCTION |
| 424 | bfd_get_reloc_size |
| 425 | |
| 426 | SYNOPSIS |
| 427 | unsigned int bfd_get_reloc_size (reloc_howto_type *); |
| 428 | |
| 429 | DESCRIPTION |
| 430 | For a reloc_howto_type that operates on a fixed number of bytes, |
| 431 | this returns the number of bytes operated on. |
| 432 | */ |
| 433 | |
| 434 | unsigned int |
| 435 | bfd_get_reloc_size (reloc_howto_type *howto) |
| 436 | { |
| 437 | switch (howto->size) |
| 438 | { |
| 439 | case 0: return 1; |
| 440 | case 1: return 2; |
| 441 | case 2: return 4; |
| 442 | case 3: return 0; |
| 443 | case 4: return 8; |
| 444 | case 8: return 16; |
| 445 | case -2: return 4; |
| 446 | default: abort (); |
| 447 | } |
| 448 | } |
| 449 | |
| 450 | /* |
| 451 | TYPEDEF |
| 452 | arelent_chain |
| 453 | |
| 454 | DESCRIPTION |
| 455 | |
| 456 | How relocs are tied together in an <<asection>>: |
| 457 | |
| 458 | .typedef struct relent_chain |
| 459 | .{ |
| 460 | . arelent relent; |
| 461 | . struct relent_chain *next; |
| 462 | .} |
| 463 | .arelent_chain; |
| 464 | . |
| 465 | */ |
| 466 | |
| 467 | /* N_ONES produces N one bits, without overflowing machine arithmetic. */ |
| 468 | #define N_ONES(n) (((((bfd_vma) 1 << ((n) - 1)) - 1) << 1) | 1) |
| 469 | |
| 470 | /* |
| 471 | FUNCTION |
| 472 | bfd_check_overflow |
| 473 | |
| 474 | SYNOPSIS |
| 475 | bfd_reloc_status_type bfd_check_overflow |
| 476 | (enum complain_overflow how, |
| 477 | unsigned int bitsize, |
| 478 | unsigned int rightshift, |
| 479 | unsigned int addrsize, |
| 480 | bfd_vma relocation); |
| 481 | |
| 482 | DESCRIPTION |
| 483 | Perform overflow checking on @var{relocation} which has |
| 484 | @var{bitsize} significant bits and will be shifted right by |
| 485 | @var{rightshift} bits, on a machine with addresses containing |
| 486 | @var{addrsize} significant bits. The result is either of |
| 487 | @code{bfd_reloc_ok} or @code{bfd_reloc_overflow}. |
| 488 | |
| 489 | */ |
| 490 | |
| 491 | bfd_reloc_status_type |
| 492 | bfd_check_overflow (enum complain_overflow how, |
| 493 | unsigned int bitsize, |
| 494 | unsigned int rightshift, |
| 495 | unsigned int addrsize, |
| 496 | bfd_vma relocation) |
| 497 | { |
| 498 | bfd_vma fieldmask, addrmask, signmask, ss, a; |
| 499 | bfd_reloc_status_type flag = bfd_reloc_ok; |
| 500 | |
| 501 | /* Note: BITSIZE should always be <= ADDRSIZE, but in case it's not, |
| 502 | we'll be permissive: extra bits in the field mask will |
| 503 | automatically extend the address mask for purposes of the |
| 504 | overflow check. */ |
| 505 | fieldmask = N_ONES (bitsize); |
| 506 | signmask = ~fieldmask; |
| 507 | addrmask = N_ONES (addrsize) | fieldmask; |
| 508 | a = (relocation & addrmask) >> rightshift;; |
| 509 | |
| 510 | switch (how) |
| 511 | { |
| 512 | case complain_overflow_dont: |
| 513 | break; |
| 514 | |
| 515 | case complain_overflow_signed: |
| 516 | /* If any sign bits are set, all sign bits must be set. That |
| 517 | is, A must be a valid negative address after shifting. */ |
| 518 | signmask = ~ (fieldmask >> 1); |
| 519 | /* Fall thru */ |
| 520 | |
| 521 | case complain_overflow_bitfield: |
| 522 | /* Bitfields are sometimes signed, sometimes unsigned. We |
| 523 | explicitly allow an address wrap too, which means a bitfield |
| 524 | of n bits is allowed to store -2**n to 2**n-1. Thus overflow |
| 525 | if the value has some, but not all, bits set outside the |
| 526 | field. */ |
| 527 | ss = a & signmask; |
| 528 | if (ss != 0 && ss != ((addrmask >> rightshift) & signmask)) |
| 529 | flag = bfd_reloc_overflow; |
| 530 | break; |
| 531 | |
| 532 | case complain_overflow_unsigned: |
| 533 | /* We have an overflow if the address does not fit in the field. */ |
| 534 | if ((a & signmask) != 0) |
| 535 | flag = bfd_reloc_overflow; |
| 536 | break; |
| 537 | |
| 538 | default: |
| 539 | abort (); |
| 540 | } |
| 541 | |
| 542 | return flag; |
| 543 | } |
| 544 | |
| 545 | /* |
| 546 | FUNCTION |
| 547 | bfd_perform_relocation |
| 548 | |
| 549 | SYNOPSIS |
| 550 | bfd_reloc_status_type bfd_perform_relocation |
| 551 | (bfd *abfd, |
| 552 | arelent *reloc_entry, |
| 553 | void *data, |
| 554 | asection *input_section, |
| 555 | bfd *output_bfd, |
| 556 | char **error_message); |
| 557 | |
| 558 | DESCRIPTION |
| 559 | If @var{output_bfd} is supplied to this function, the |
| 560 | generated image will be relocatable; the relocations are |
| 561 | copied to the output file after they have been changed to |
| 562 | reflect the new state of the world. There are two ways of |
| 563 | reflecting the results of partial linkage in an output file: |
| 564 | by modifying the output data in place, and by modifying the |
| 565 | relocation record. Some native formats (e.g., basic a.out and |
| 566 | basic coff) have no way of specifying an addend in the |
| 567 | relocation type, so the addend has to go in the output data. |
| 568 | This is no big deal since in these formats the output data |
| 569 | slot will always be big enough for the addend. Complex reloc |
| 570 | types with addends were invented to solve just this problem. |
| 571 | The @var{error_message} argument is set to an error message if |
| 572 | this return @code{bfd_reloc_dangerous}. |
| 573 | |
| 574 | */ |
| 575 | |
| 576 | bfd_reloc_status_type |
| 577 | bfd_perform_relocation (bfd *abfd, |
| 578 | arelent *reloc_entry, |
| 579 | void *data, |
| 580 | asection *input_section, |
| 581 | bfd *output_bfd, |
| 582 | char **error_message) |
| 583 | { |
| 584 | bfd_vma relocation; |
| 585 | bfd_reloc_status_type flag = bfd_reloc_ok; |
| 586 | bfd_size_type octets = reloc_entry->address * bfd_octets_per_byte (abfd); |
| 587 | bfd_vma output_base = 0; |
| 588 | reloc_howto_type *howto = reloc_entry->howto; |
| 589 | asection *reloc_target_output_section; |
| 590 | asymbol *symbol; |
| 591 | |
| 592 | symbol = *(reloc_entry->sym_ptr_ptr); |
| 593 | if (bfd_is_abs_section (symbol->section) |
| 594 | && output_bfd != NULL) |
| 595 | { |
| 596 | reloc_entry->address += input_section->output_offset; |
| 597 | return bfd_reloc_ok; |
| 598 | } |
| 599 | |
| 600 | /* If we are not producing relocatable output, return an error if |
| 601 | the symbol is not defined. An undefined weak symbol is |
| 602 | considered to have a value of zero (SVR4 ABI, p. 4-27). */ |
| 603 | if (bfd_is_und_section (symbol->section) |
| 604 | && (symbol->flags & BSF_WEAK) == 0 |
| 605 | && output_bfd == NULL) |
| 606 | flag = bfd_reloc_undefined; |
| 607 | |
| 608 | /* If there is a function supplied to handle this relocation type, |
| 609 | call it. It'll return `bfd_reloc_continue' if further processing |
| 610 | can be done. */ |
| 611 | if (howto->special_function) |
| 612 | { |
| 613 | bfd_reloc_status_type cont; |
| 614 | cont = howto->special_function (abfd, reloc_entry, symbol, data, |
| 615 | input_section, output_bfd, |
| 616 | error_message); |
| 617 | if (cont != bfd_reloc_continue) |
| 618 | return cont; |
| 619 | } |
| 620 | |
| 621 | /* Is the address of the relocation really within the section? */ |
| 622 | if (reloc_entry->address > bfd_get_section_limit (abfd, input_section)) |
| 623 | return bfd_reloc_outofrange; |
| 624 | |
| 625 | /* Work out which section the relocation is targeted at and the |
| 626 | initial relocation command value. */ |
| 627 | |
| 628 | /* Get symbol value. (Common symbols are special.) */ |
| 629 | if (bfd_is_com_section (symbol->section)) |
| 630 | relocation = 0; |
| 631 | else |
| 632 | relocation = symbol->value; |
| 633 | |
| 634 | reloc_target_output_section = symbol->section->output_section; |
| 635 | |
| 636 | /* Convert input-section-relative symbol value to absolute. */ |
| 637 | if ((output_bfd && ! howto->partial_inplace) |
| 638 | || reloc_target_output_section == NULL) |
| 639 | output_base = 0; |
| 640 | else |
| 641 | output_base = reloc_target_output_section->vma; |
| 642 | |
| 643 | relocation += output_base + symbol->section->output_offset; |
| 644 | |
| 645 | /* Add in supplied addend. */ |
| 646 | relocation += reloc_entry->addend; |
| 647 | |
| 648 | /* Here the variable relocation holds the final address of the |
| 649 | symbol we are relocating against, plus any addend. */ |
| 650 | |
| 651 | if (howto->pc_relative) |
| 652 | { |
| 653 | /* This is a PC relative relocation. We want to set RELOCATION |
| 654 | to the distance between the address of the symbol and the |
| 655 | location. RELOCATION is already the address of the symbol. |
| 656 | |
| 657 | We start by subtracting the address of the section containing |
| 658 | the location. |
| 659 | |
| 660 | If pcrel_offset is set, we must further subtract the position |
| 661 | of the location within the section. Some targets arrange for |
| 662 | the addend to be the negative of the position of the location |
| 663 | within the section; for example, i386-aout does this. For |
| 664 | i386-aout, pcrel_offset is FALSE. Some other targets do not |
| 665 | include the position of the location; for example, m88kbcs, |
| 666 | or ELF. For those targets, pcrel_offset is TRUE. |
| 667 | |
| 668 | If we are producing relocatable output, then we must ensure |
| 669 | that this reloc will be correctly computed when the final |
| 670 | relocation is done. If pcrel_offset is FALSE we want to wind |
| 671 | up with the negative of the location within the section, |
| 672 | which means we must adjust the existing addend by the change |
| 673 | in the location within the section. If pcrel_offset is TRUE |
| 674 | we do not want to adjust the existing addend at all. |
| 675 | |
| 676 | FIXME: This seems logical to me, but for the case of |
| 677 | producing relocatable output it is not what the code |
| 678 | actually does. I don't want to change it, because it seems |
| 679 | far too likely that something will break. */ |
| 680 | |
| 681 | relocation -= |
| 682 | input_section->output_section->vma + input_section->output_offset; |
| 683 | |
| 684 | if (howto->pcrel_offset) |
| 685 | relocation -= reloc_entry->address; |
| 686 | } |
| 687 | |
| 688 | if (output_bfd != NULL) |
| 689 | { |
| 690 | if (! howto->partial_inplace) |
| 691 | { |
| 692 | /* This is a partial relocation, and we want to apply the relocation |
| 693 | to the reloc entry rather than the raw data. Modify the reloc |
| 694 | inplace to reflect what we now know. */ |
| 695 | reloc_entry->addend = relocation; |
| 696 | reloc_entry->address += input_section->output_offset; |
| 697 | return flag; |
| 698 | } |
| 699 | else |
| 700 | { |
| 701 | /* This is a partial relocation, but inplace, so modify the |
| 702 | reloc record a bit. |
| 703 | |
| 704 | If we've relocated with a symbol with a section, change |
| 705 | into a ref to the section belonging to the symbol. */ |
| 706 | |
| 707 | reloc_entry->address += input_section->output_offset; |
| 708 | |
| 709 | /* WTF?? */ |
| 710 | if (abfd->xvec->flavour == bfd_target_coff_flavour |
| 711 | && strcmp (abfd->xvec->name, "coff-Intel-little") != 0 |
| 712 | && strcmp (abfd->xvec->name, "coff-Intel-big") != 0) |
| 713 | { |
| 714 | /* For m68k-coff, the addend was being subtracted twice during |
| 715 | relocation with -r. Removing the line below this comment |
| 716 | fixes that problem; see PR 2953. |
| 717 | |
| 718 | However, Ian wrote the following, regarding removing the line below, |
| 719 | which explains why it is still enabled: --djm |
| 720 | |
| 721 | If you put a patch like that into BFD you need to check all the COFF |
| 722 | linkers. I am fairly certain that patch will break coff-i386 (e.g., |
| 723 | SCO); see coff_i386_reloc in coff-i386.c where I worked around the |
| 724 | problem in a different way. There may very well be a reason that the |
| 725 | code works as it does. |
| 726 | |
| 727 | Hmmm. The first obvious point is that bfd_perform_relocation should |
| 728 | not have any tests that depend upon the flavour. It's seem like |
| 729 | entirely the wrong place for such a thing. The second obvious point |
| 730 | is that the current code ignores the reloc addend when producing |
| 731 | relocatable output for COFF. That's peculiar. In fact, I really |
| 732 | have no idea what the point of the line you want to remove is. |
| 733 | |
| 734 | A typical COFF reloc subtracts the old value of the symbol and adds in |
| 735 | the new value to the location in the object file (if it's a pc |
| 736 | relative reloc it adds the difference between the symbol value and the |
| 737 | location). When relocating we need to preserve that property. |
| 738 | |
| 739 | BFD handles this by setting the addend to the negative of the old |
| 740 | value of the symbol. Unfortunately it handles common symbols in a |
| 741 | non-standard way (it doesn't subtract the old value) but that's a |
| 742 | different story (we can't change it without losing backward |
| 743 | compatibility with old object files) (coff-i386 does subtract the old |
| 744 | value, to be compatible with existing coff-i386 targets, like SCO). |
| 745 | |
| 746 | So everything works fine when not producing relocatable output. When |
| 747 | we are producing relocatable output, logically we should do exactly |
| 748 | what we do when not producing relocatable output. Therefore, your |
| 749 | patch is correct. In fact, it should probably always just set |
| 750 | reloc_entry->addend to 0 for all cases, since it is, in fact, going to |
| 751 | add the value into the object file. This won't hurt the COFF code, |
| 752 | which doesn't use the addend; I'm not sure what it will do to other |
| 753 | formats (the thing to check for would be whether any formats both use |
| 754 | the addend and set partial_inplace). |
| 755 | |
| 756 | When I wanted to make coff-i386 produce relocatable output, I ran |
| 757 | into the problem that you are running into: I wanted to remove that |
| 758 | line. Rather than risk it, I made the coff-i386 relocs use a special |
| 759 | function; it's coff_i386_reloc in coff-i386.c. The function |
| 760 | specifically adds the addend field into the object file, knowing that |
| 761 | bfd_perform_relocation is not going to. If you remove that line, then |
| 762 | coff-i386.c will wind up adding the addend field in twice. It's |
| 763 | trivial to fix; it just needs to be done. |
| 764 | |
| 765 | The problem with removing the line is just that it may break some |
| 766 | working code. With BFD it's hard to be sure of anything. The right |
| 767 | way to deal with this is simply to build and test at least all the |
| 768 | supported COFF targets. It should be straightforward if time and disk |
| 769 | space consuming. For each target: |
| 770 | 1) build the linker |
| 771 | 2) generate some executable, and link it using -r (I would |
| 772 | probably use paranoia.o and link against newlib/libc.a, which |
| 773 | for all the supported targets would be available in |
| 774 | /usr/cygnus/progressive/H-host/target/lib/libc.a). |
| 775 | 3) make the change to reloc.c |
| 776 | 4) rebuild the linker |
| 777 | 5) repeat step 2 |
| 778 | 6) if the resulting object files are the same, you have at least |
| 779 | made it no worse |
| 780 | 7) if they are different you have to figure out which version is |
| 781 | right |
| 782 | */ |
| 783 | relocation -= reloc_entry->addend; |
| 784 | reloc_entry->addend = 0; |
| 785 | } |
| 786 | else |
| 787 | { |
| 788 | reloc_entry->addend = relocation; |
| 789 | } |
| 790 | } |
| 791 | } |
| 792 | else |
| 793 | { |
| 794 | reloc_entry->addend = 0; |
| 795 | } |
| 796 | |
| 797 | /* FIXME: This overflow checking is incomplete, because the value |
| 798 | might have overflowed before we get here. For a correct check we |
| 799 | need to compute the value in a size larger than bitsize, but we |
| 800 | can't reasonably do that for a reloc the same size as a host |
| 801 | machine word. |
| 802 | FIXME: We should also do overflow checking on the result after |
| 803 | adding in the value contained in the object file. */ |
| 804 | if (howto->complain_on_overflow != complain_overflow_dont |
| 805 | && flag == bfd_reloc_ok) |
| 806 | flag = bfd_check_overflow (howto->complain_on_overflow, |
| 807 | howto->bitsize, |
| 808 | howto->rightshift, |
| 809 | bfd_arch_bits_per_address (abfd), |
| 810 | relocation); |
| 811 | |
| 812 | /* Either we are relocating all the way, or we don't want to apply |
| 813 | the relocation to the reloc entry (probably because there isn't |
| 814 | any room in the output format to describe addends to relocs). */ |
| 815 | |
| 816 | /* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler |
| 817 | (OSF version 1.3, compiler version 3.11). It miscompiles the |
| 818 | following program: |
| 819 | |
| 820 | struct str |
| 821 | { |
| 822 | unsigned int i0; |
| 823 | } s = { 0 }; |
| 824 | |
| 825 | int |
| 826 | main () |
| 827 | { |
| 828 | unsigned long x; |
| 829 | |
| 830 | x = 0x100000000; |
| 831 | x <<= (unsigned long) s.i0; |
| 832 | if (x == 0) |
| 833 | printf ("failed\n"); |
| 834 | else |
| 835 | printf ("succeeded (%lx)\n", x); |
| 836 | } |
| 837 | */ |
| 838 | |
| 839 | relocation >>= (bfd_vma) howto->rightshift; |
| 840 | |
| 841 | /* Shift everything up to where it's going to be used. */ |
| 842 | relocation <<= (bfd_vma) howto->bitpos; |
| 843 | |
| 844 | /* Wait for the day when all have the mask in them. */ |
| 845 | |
| 846 | /* What we do: |
| 847 | i instruction to be left alone |
| 848 | o offset within instruction |
| 849 | r relocation offset to apply |
| 850 | S src mask |
| 851 | D dst mask |
| 852 | N ~dst mask |
| 853 | A part 1 |
| 854 | B part 2 |
| 855 | R result |
| 856 | |
| 857 | Do this: |
| 858 | (( i i i i i o o o o o from bfd_get<size> |
| 859 | and S S S S S) to get the size offset we want |
| 860 | + r r r r r r r r r r) to get the final value to place |
| 861 | and D D D D D to chop to right size |
| 862 | ----------------------- |
| 863 | = A A A A A |
| 864 | And this: |
| 865 | ( i i i i i o o o o o from bfd_get<size> |
| 866 | and N N N N N ) get instruction |
| 867 | ----------------------- |
| 868 | = B B B B B |
| 869 | |
| 870 | And then: |
| 871 | ( B B B B B |
| 872 | or A A A A A) |
| 873 | ----------------------- |
| 874 | = R R R R R R R R R R put into bfd_put<size> |
| 875 | */ |
| 876 | |
| 877 | #define DOIT(x) \ |
| 878 | x = ( (x & ~howto->dst_mask) | (((x & howto->src_mask) + relocation) & howto->dst_mask)) |
| 879 | |
| 880 | switch (howto->size) |
| 881 | { |
| 882 | case 0: |
| 883 | { |
| 884 | char x = bfd_get_8 (abfd, (char *) data + octets); |
| 885 | DOIT (x); |
| 886 | bfd_put_8 (abfd, x, (unsigned char *) data + octets); |
| 887 | } |
| 888 | break; |
| 889 | |
| 890 | case 1: |
| 891 | { |
| 892 | short x = bfd_get_16 (abfd, (bfd_byte *) data + octets); |
| 893 | DOIT (x); |
| 894 | bfd_put_16 (abfd, (bfd_vma) x, (unsigned char *) data + octets); |
| 895 | } |
| 896 | break; |
| 897 | case 2: |
| 898 | { |
| 899 | long x = bfd_get_32 (abfd, (bfd_byte *) data + octets); |
| 900 | DOIT (x); |
| 901 | bfd_put_32 (abfd, (bfd_vma) x, (bfd_byte *) data + octets); |
| 902 | } |
| 903 | break; |
| 904 | case -2: |
| 905 | { |
| 906 | long x = bfd_get_32 (abfd, (bfd_byte *) data + octets); |
| 907 | relocation = -relocation; |
| 908 | DOIT (x); |
| 909 | bfd_put_32 (abfd, (bfd_vma) x, (bfd_byte *) data + octets); |
| 910 | } |
| 911 | break; |
| 912 | |
| 913 | case -1: |
| 914 | { |
| 915 | long x = bfd_get_16 (abfd, (bfd_byte *) data + octets); |
| 916 | relocation = -relocation; |
| 917 | DOIT (x); |
| 918 | bfd_put_16 (abfd, (bfd_vma) x, (bfd_byte *) data + octets); |
| 919 | } |
| 920 | break; |
| 921 | |
| 922 | case 3: |
| 923 | /* Do nothing */ |
| 924 | break; |
| 925 | |
| 926 | case 4: |
| 927 | #ifdef BFD64 |
| 928 | { |
| 929 | bfd_vma x = bfd_get_64 (abfd, (bfd_byte *) data + octets); |
| 930 | DOIT (x); |
| 931 | bfd_put_64 (abfd, x, (bfd_byte *) data + octets); |
| 932 | } |
| 933 | #else |
| 934 | abort (); |
| 935 | #endif |
| 936 | break; |
| 937 | default: |
| 938 | return bfd_reloc_other; |
| 939 | } |
| 940 | |
| 941 | return flag; |
| 942 | } |
| 943 | |
| 944 | /* |
| 945 | FUNCTION |
| 946 | bfd_install_relocation |
| 947 | |
| 948 | SYNOPSIS |
| 949 | bfd_reloc_status_type bfd_install_relocation |
| 950 | (bfd *abfd, |
| 951 | arelent *reloc_entry, |
| 952 | void *data, bfd_vma data_start, |
| 953 | asection *input_section, |
| 954 | char **error_message); |
| 955 | |
| 956 | DESCRIPTION |
| 957 | This looks remarkably like <<bfd_perform_relocation>>, except it |
| 958 | does not expect that the section contents have been filled in. |
| 959 | I.e., it's suitable for use when creating, rather than applying |
| 960 | a relocation. |
| 961 | |
| 962 | For now, this function should be considered reserved for the |
| 963 | assembler. |
| 964 | */ |
| 965 | |
| 966 | bfd_reloc_status_type |
| 967 | bfd_install_relocation (bfd *abfd, |
| 968 | arelent *reloc_entry, |
| 969 | void *data_start, |
| 970 | bfd_vma data_start_offset, |
| 971 | asection *input_section, |
| 972 | char **error_message) |
| 973 | { |
| 974 | bfd_vma relocation; |
| 975 | bfd_reloc_status_type flag = bfd_reloc_ok; |
| 976 | bfd_size_type octets = reloc_entry->address * bfd_octets_per_byte (abfd); |
| 977 | bfd_vma output_base = 0; |
| 978 | reloc_howto_type *howto = reloc_entry->howto; |
| 979 | asection *reloc_target_output_section; |
| 980 | asymbol *symbol; |
| 981 | bfd_byte *data; |
| 982 | |
| 983 | symbol = *(reloc_entry->sym_ptr_ptr); |
| 984 | if (bfd_is_abs_section (symbol->section)) |
| 985 | { |
| 986 | reloc_entry->address += input_section->output_offset; |
| 987 | return bfd_reloc_ok; |
| 988 | } |
| 989 | |
| 990 | /* If there is a function supplied to handle this relocation type, |
| 991 | call it. It'll return `bfd_reloc_continue' if further processing |
| 992 | can be done. */ |
| 993 | if (howto->special_function) |
| 994 | { |
| 995 | bfd_reloc_status_type cont; |
| 996 | |
| 997 | /* XXX - The special_function calls haven't been fixed up to deal |
| 998 | with creating new relocations and section contents. */ |
| 999 | cont = howto->special_function (abfd, reloc_entry, symbol, |
| 1000 | /* XXX - Non-portable! */ |
| 1001 | ((bfd_byte *) data_start |
| 1002 | - data_start_offset), |
| 1003 | input_section, abfd, error_message); |
| 1004 | if (cont != bfd_reloc_continue) |
| 1005 | return cont; |
| 1006 | } |
| 1007 | |
| 1008 | /* Is the address of the relocation really within the section? */ |
| 1009 | if (reloc_entry->address > bfd_get_section_limit (abfd, input_section)) |
| 1010 | return bfd_reloc_outofrange; |
| 1011 | |
| 1012 | /* Work out which section the relocation is targeted at and the |
| 1013 | initial relocation command value. */ |
| 1014 | |
| 1015 | /* Get symbol value. (Common symbols are special.) */ |
| 1016 | if (bfd_is_com_section (symbol->section)) |
| 1017 | relocation = 0; |
| 1018 | else |
| 1019 | relocation = symbol->value; |
| 1020 | |
| 1021 | reloc_target_output_section = symbol->section->output_section; |
| 1022 | |
| 1023 | /* Convert input-section-relative symbol value to absolute. */ |
| 1024 | if (! howto->partial_inplace) |
| 1025 | output_base = 0; |
| 1026 | else |
| 1027 | output_base = reloc_target_output_section->vma; |
| 1028 | |
| 1029 | relocation += output_base + symbol->section->output_offset; |
| 1030 | |
| 1031 | /* Add in supplied addend. */ |
| 1032 | relocation += reloc_entry->addend; |
| 1033 | |
| 1034 | /* Here the variable relocation holds the final address of the |
| 1035 | symbol we are relocating against, plus any addend. */ |
| 1036 | |
| 1037 | if (howto->pc_relative) |
| 1038 | { |
| 1039 | /* This is a PC relative relocation. We want to set RELOCATION |
| 1040 | to the distance between the address of the symbol and the |
| 1041 | location. RELOCATION is already the address of the symbol. |
| 1042 | |
| 1043 | We start by subtracting the address of the section containing |
| 1044 | the location. |
| 1045 | |
| 1046 | If pcrel_offset is set, we must further subtract the position |
| 1047 | of the location within the section. Some targets arrange for |
| 1048 | the addend to be the negative of the position of the location |
| 1049 | within the section; for example, i386-aout does this. For |
| 1050 | i386-aout, pcrel_offset is FALSE. Some other targets do not |
| 1051 | include the position of the location; for example, m88kbcs, |
| 1052 | or ELF. For those targets, pcrel_offset is TRUE. |
| 1053 | |
| 1054 | If we are producing relocatable output, then we must ensure |
| 1055 | that this reloc will be correctly computed when the final |
| 1056 | relocation is done. If pcrel_offset is FALSE we want to wind |
| 1057 | up with the negative of the location within the section, |
| 1058 | which means we must adjust the existing addend by the change |
| 1059 | in the location within the section. If pcrel_offset is TRUE |
| 1060 | we do not want to adjust the existing addend at all. |
| 1061 | |
| 1062 | FIXME: This seems logical to me, but for the case of |
| 1063 | producing relocatable output it is not what the code |
| 1064 | actually does. I don't want to change it, because it seems |
| 1065 | far too likely that something will break. */ |
| 1066 | |
| 1067 | relocation -= |
| 1068 | input_section->output_section->vma + input_section->output_offset; |
| 1069 | |
| 1070 | if (howto->pcrel_offset && howto->partial_inplace) |
| 1071 | relocation -= reloc_entry->address; |
| 1072 | } |
| 1073 | |
| 1074 | if (! howto->partial_inplace) |
| 1075 | { |
| 1076 | /* This is a partial relocation, and we want to apply the relocation |
| 1077 | to the reloc entry rather than the raw data. Modify the reloc |
| 1078 | inplace to reflect what we now know. */ |
| 1079 | reloc_entry->addend = relocation; |
| 1080 | reloc_entry->address += input_section->output_offset; |
| 1081 | return flag; |
| 1082 | } |
| 1083 | else |
| 1084 | { |
| 1085 | /* This is a partial relocation, but inplace, so modify the |
| 1086 | reloc record a bit. |
| 1087 | |
| 1088 | If we've relocated with a symbol with a section, change |
| 1089 | into a ref to the section belonging to the symbol. */ |
| 1090 | reloc_entry->address += input_section->output_offset; |
| 1091 | |
| 1092 | /* WTF?? */ |
| 1093 | if (abfd->xvec->flavour == bfd_target_coff_flavour |
| 1094 | && strcmp (abfd->xvec->name, "coff-Intel-little") != 0 |
| 1095 | && strcmp (abfd->xvec->name, "coff-Intel-big") != 0) |
| 1096 | { |
| 1097 | |
| 1098 | /* For m68k-coff, the addend was being subtracted twice during |
| 1099 | relocation with -r. Removing the line below this comment |
| 1100 | fixes that problem; see PR 2953. |
| 1101 | |
| 1102 | However, Ian wrote the following, regarding removing the line below, |
| 1103 | which explains why it is still enabled: --djm |
| 1104 | |
| 1105 | If you put a patch like that into BFD you need to check all the COFF |
| 1106 | linkers. I am fairly certain that patch will break coff-i386 (e.g., |
| 1107 | SCO); see coff_i386_reloc in coff-i386.c where I worked around the |
| 1108 | problem in a different way. There may very well be a reason that the |
| 1109 | code works as it does. |
| 1110 | |
| 1111 | Hmmm. The first obvious point is that bfd_install_relocation should |
| 1112 | not have any tests that depend upon the flavour. It's seem like |
| 1113 | entirely the wrong place for such a thing. The second obvious point |
| 1114 | is that the current code ignores the reloc addend when producing |
| 1115 | relocatable output for COFF. That's peculiar. In fact, I really |
| 1116 | have no idea what the point of the line you want to remove is. |
| 1117 | |
| 1118 | A typical COFF reloc subtracts the old value of the symbol and adds in |
| 1119 | the new value to the location in the object file (if it's a pc |
| 1120 | relative reloc it adds the difference between the symbol value and the |
| 1121 | location). When relocating we need to preserve that property. |
| 1122 | |
| 1123 | BFD handles this by setting the addend to the negative of the old |
| 1124 | value of the symbol. Unfortunately it handles common symbols in a |
| 1125 | non-standard way (it doesn't subtract the old value) but that's a |
| 1126 | different story (we can't change it without losing backward |
| 1127 | compatibility with old object files) (coff-i386 does subtract the old |
| 1128 | value, to be compatible with existing coff-i386 targets, like SCO). |
| 1129 | |
| 1130 | So everything works fine when not producing relocatable output. When |
| 1131 | we are producing relocatable output, logically we should do exactly |
| 1132 | what we do when not producing relocatable output. Therefore, your |
| 1133 | patch is correct. In fact, it should probably always just set |
| 1134 | reloc_entry->addend to 0 for all cases, since it is, in fact, going to |
| 1135 | add the value into the object file. This won't hurt the COFF code, |
| 1136 | which doesn't use the addend; I'm not sure what it will do to other |
| 1137 | formats (the thing to check for would be whether any formats both use |
| 1138 | the addend and set partial_inplace). |
| 1139 | |
| 1140 | When I wanted to make coff-i386 produce relocatable output, I ran |
| 1141 | into the problem that you are running into: I wanted to remove that |
| 1142 | line. Rather than risk it, I made the coff-i386 relocs use a special |
| 1143 | function; it's coff_i386_reloc in coff-i386.c. The function |
| 1144 | specifically adds the addend field into the object file, knowing that |
| 1145 | bfd_install_relocation is not going to. If you remove that line, then |
| 1146 | coff-i386.c will wind up adding the addend field in twice. It's |
| 1147 | trivial to fix; it just needs to be done. |
| 1148 | |
| 1149 | The problem with removing the line is just that it may break some |
| 1150 | working code. With BFD it's hard to be sure of anything. The right |
| 1151 | way to deal with this is simply to build and test at least all the |
| 1152 | supported COFF targets. It should be straightforward if time and disk |
| 1153 | space consuming. For each target: |
| 1154 | 1) build the linker |
| 1155 | 2) generate some executable, and link it using -r (I would |
| 1156 | probably use paranoia.o and link against newlib/libc.a, which |
| 1157 | for all the supported targets would be available in |
| 1158 | /usr/cygnus/progressive/H-host/target/lib/libc.a). |
| 1159 | 3) make the change to reloc.c |
| 1160 | 4) rebuild the linker |
| 1161 | 5) repeat step 2 |
| 1162 | 6) if the resulting object files are the same, you have at least |
| 1163 | made it no worse |
| 1164 | 7) if they are different you have to figure out which version is |
| 1165 | right. */ |
| 1166 | relocation -= reloc_entry->addend; |
| 1167 | /* FIXME: There should be no target specific code here... */ |
| 1168 | if (strcmp (abfd->xvec->name, "coff-z8k") != 0) |
| 1169 | reloc_entry->addend = 0; |
| 1170 | } |
| 1171 | else |
| 1172 | { |
| 1173 | reloc_entry->addend = relocation; |
| 1174 | } |
| 1175 | } |
| 1176 | |
| 1177 | /* FIXME: This overflow checking is incomplete, because the value |
| 1178 | might have overflowed before we get here. For a correct check we |
| 1179 | need to compute the value in a size larger than bitsize, but we |
| 1180 | can't reasonably do that for a reloc the same size as a host |
| 1181 | machine word. |
| 1182 | FIXME: We should also do overflow checking on the result after |
| 1183 | adding in the value contained in the object file. */ |
| 1184 | if (howto->complain_on_overflow != complain_overflow_dont) |
| 1185 | flag = bfd_check_overflow (howto->complain_on_overflow, |
| 1186 | howto->bitsize, |
| 1187 | howto->rightshift, |
| 1188 | bfd_arch_bits_per_address (abfd), |
| 1189 | relocation); |
| 1190 | |
| 1191 | /* Either we are relocating all the way, or we don't want to apply |
| 1192 | the relocation to the reloc entry (probably because there isn't |
| 1193 | any room in the output format to describe addends to relocs). */ |
| 1194 | |
| 1195 | /* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler |
| 1196 | (OSF version 1.3, compiler version 3.11). It miscompiles the |
| 1197 | following program: |
| 1198 | |
| 1199 | struct str |
| 1200 | { |
| 1201 | unsigned int i0; |
| 1202 | } s = { 0 }; |
| 1203 | |
| 1204 | int |
| 1205 | main () |
| 1206 | { |
| 1207 | unsigned long x; |
| 1208 | |
| 1209 | x = 0x100000000; |
| 1210 | x <<= (unsigned long) s.i0; |
| 1211 | if (x == 0) |
| 1212 | printf ("failed\n"); |
| 1213 | else |
| 1214 | printf ("succeeded (%lx)\n", x); |
| 1215 | } |
| 1216 | */ |
| 1217 | |
| 1218 | relocation >>= (bfd_vma) howto->rightshift; |
| 1219 | |
| 1220 | /* Shift everything up to where it's going to be used. */ |
| 1221 | relocation <<= (bfd_vma) howto->bitpos; |
| 1222 | |
| 1223 | /* Wait for the day when all have the mask in them. */ |
| 1224 | |
| 1225 | /* What we do: |
| 1226 | i instruction to be left alone |
| 1227 | o offset within instruction |
| 1228 | r relocation offset to apply |
| 1229 | S src mask |
| 1230 | D dst mask |
| 1231 | N ~dst mask |
| 1232 | A part 1 |
| 1233 | B part 2 |
| 1234 | R result |
| 1235 | |
| 1236 | Do this: |
| 1237 | (( i i i i i o o o o o from bfd_get<size> |
| 1238 | and S S S S S) to get the size offset we want |
| 1239 | + r r r r r r r r r r) to get the final value to place |
| 1240 | and D D D D D to chop to right size |
| 1241 | ----------------------- |
| 1242 | = A A A A A |
| 1243 | And this: |
| 1244 | ( i i i i i o o o o o from bfd_get<size> |
| 1245 | and N N N N N ) get instruction |
| 1246 | ----------------------- |
| 1247 | = B B B B B |
| 1248 | |
| 1249 | And then: |
| 1250 | ( B B B B B |
| 1251 | or A A A A A) |
| 1252 | ----------------------- |
| 1253 | = R R R R R R R R R R put into bfd_put<size> |
| 1254 | */ |
| 1255 | |
| 1256 | #define DOIT(x) \ |
| 1257 | x = ( (x & ~howto->dst_mask) | (((x & howto->src_mask) + relocation) & howto->dst_mask)) |
| 1258 | |
| 1259 | data = (bfd_byte *) data_start + (octets - data_start_offset); |
| 1260 | |
| 1261 | switch (howto->size) |
| 1262 | { |
| 1263 | case 0: |
| 1264 | { |
| 1265 | char x = bfd_get_8 (abfd, data); |
| 1266 | DOIT (x); |
| 1267 | bfd_put_8 (abfd, x, data); |
| 1268 | } |
| 1269 | break; |
| 1270 | |
| 1271 | case 1: |
| 1272 | { |
| 1273 | short x = bfd_get_16 (abfd, data); |
| 1274 | DOIT (x); |
| 1275 | bfd_put_16 (abfd, (bfd_vma) x, data); |
| 1276 | } |
| 1277 | break; |
| 1278 | case 2: |
| 1279 | { |
| 1280 | long x = bfd_get_32 (abfd, data); |
| 1281 | DOIT (x); |
| 1282 | bfd_put_32 (abfd, (bfd_vma) x, data); |
| 1283 | } |
| 1284 | break; |
| 1285 | case -2: |
| 1286 | { |
| 1287 | long x = bfd_get_32 (abfd, data); |
| 1288 | relocation = -relocation; |
| 1289 | DOIT (x); |
| 1290 | bfd_put_32 (abfd, (bfd_vma) x, data); |
| 1291 | } |
| 1292 | break; |
| 1293 | |
| 1294 | case 3: |
| 1295 | /* Do nothing */ |
| 1296 | break; |
| 1297 | |
| 1298 | case 4: |
| 1299 | { |
| 1300 | bfd_vma x = bfd_get_64 (abfd, data); |
| 1301 | DOIT (x); |
| 1302 | bfd_put_64 (abfd, x, data); |
| 1303 | } |
| 1304 | break; |
| 1305 | default: |
| 1306 | return bfd_reloc_other; |
| 1307 | } |
| 1308 | |
| 1309 | return flag; |
| 1310 | } |
| 1311 | |
| 1312 | /* This relocation routine is used by some of the backend linkers. |
| 1313 | They do not construct asymbol or arelent structures, so there is no |
| 1314 | reason for them to use bfd_perform_relocation. Also, |
| 1315 | bfd_perform_relocation is so hacked up it is easier to write a new |
| 1316 | function than to try to deal with it. |
| 1317 | |
| 1318 | This routine does a final relocation. Whether it is useful for a |
| 1319 | relocatable link depends upon how the object format defines |
| 1320 | relocations. |
| 1321 | |
| 1322 | FIXME: This routine ignores any special_function in the HOWTO, |
| 1323 | since the existing special_function values have been written for |
| 1324 | bfd_perform_relocation. |
| 1325 | |
| 1326 | HOWTO is the reloc howto information. |
| 1327 | INPUT_BFD is the BFD which the reloc applies to. |
| 1328 | INPUT_SECTION is the section which the reloc applies to. |
| 1329 | CONTENTS is the contents of the section. |
| 1330 | ADDRESS is the address of the reloc within INPUT_SECTION. |
| 1331 | VALUE is the value of the symbol the reloc refers to. |
| 1332 | ADDEND is the addend of the reloc. */ |
| 1333 | |
| 1334 | bfd_reloc_status_type |
| 1335 | _bfd_final_link_relocate (reloc_howto_type *howto, |
| 1336 | bfd *input_bfd, |
| 1337 | asection *input_section, |
| 1338 | bfd_byte *contents, |
| 1339 | bfd_vma address, |
| 1340 | bfd_vma value, |
| 1341 | bfd_vma addend) |
| 1342 | { |
| 1343 | bfd_vma relocation; |
| 1344 | |
| 1345 | /* Sanity check the address. */ |
| 1346 | if (address > bfd_get_section_limit (input_bfd, input_section)) |
| 1347 | return bfd_reloc_outofrange; |
| 1348 | |
| 1349 | /* This function assumes that we are dealing with a basic relocation |
| 1350 | against a symbol. We want to compute the value of the symbol to |
| 1351 | relocate to. This is just VALUE, the value of the symbol, plus |
| 1352 | ADDEND, any addend associated with the reloc. */ |
| 1353 | relocation = value + addend; |
| 1354 | |
| 1355 | /* If the relocation is PC relative, we want to set RELOCATION to |
| 1356 | the distance between the symbol (currently in RELOCATION) and the |
| 1357 | location we are relocating. Some targets (e.g., i386-aout) |
| 1358 | arrange for the contents of the section to be the negative of the |
| 1359 | offset of the location within the section; for such targets |
| 1360 | pcrel_offset is FALSE. Other targets (e.g., m88kbcs or ELF) |
| 1361 | simply leave the contents of the section as zero; for such |
| 1362 | targets pcrel_offset is TRUE. If pcrel_offset is FALSE we do not |
| 1363 | need to subtract out the offset of the location within the |
| 1364 | section (which is just ADDRESS). */ |
| 1365 | if (howto->pc_relative) |
| 1366 | { |
| 1367 | relocation -= (input_section->output_section->vma |
| 1368 | + input_section->output_offset); |
| 1369 | if (howto->pcrel_offset) |
| 1370 | relocation -= address; |
| 1371 | } |
| 1372 | |
| 1373 | return _bfd_relocate_contents (howto, input_bfd, relocation, |
| 1374 | contents + address); |
| 1375 | } |
| 1376 | |
| 1377 | /* Relocate a given location using a given value and howto. */ |
| 1378 | |
| 1379 | bfd_reloc_status_type |
| 1380 | _bfd_relocate_contents (reloc_howto_type *howto, |
| 1381 | bfd *input_bfd, |
| 1382 | bfd_vma relocation, |
| 1383 | bfd_byte *location) |
| 1384 | { |
| 1385 | int size; |
| 1386 | bfd_vma x = 0; |
| 1387 | bfd_reloc_status_type flag; |
| 1388 | unsigned int rightshift = howto->rightshift; |
| 1389 | unsigned int bitpos = howto->bitpos; |
| 1390 | |
| 1391 | /* If the size is negative, negate RELOCATION. This isn't very |
| 1392 | general. */ |
| 1393 | if (howto->size < 0) |
| 1394 | relocation = -relocation; |
| 1395 | |
| 1396 | /* Get the value we are going to relocate. */ |
| 1397 | size = bfd_get_reloc_size (howto); |
| 1398 | switch (size) |
| 1399 | { |
| 1400 | default: |
| 1401 | case 0: |
| 1402 | abort (); |
| 1403 | case 1: |
| 1404 | x = bfd_get_8 (input_bfd, location); |
| 1405 | break; |
| 1406 | case 2: |
| 1407 | x = bfd_get_16 (input_bfd, location); |
| 1408 | break; |
| 1409 | case 4: |
| 1410 | x = bfd_get_32 (input_bfd, location); |
| 1411 | break; |
| 1412 | case 8: |
| 1413 | #ifdef BFD64 |
| 1414 | x = bfd_get_64 (input_bfd, location); |
| 1415 | #else |
| 1416 | abort (); |
| 1417 | #endif |
| 1418 | break; |
| 1419 | } |
| 1420 | |
| 1421 | /* Check for overflow. FIXME: We may drop bits during the addition |
| 1422 | which we don't check for. We must either check at every single |
| 1423 | operation, which would be tedious, or we must do the computations |
| 1424 | in a type larger than bfd_vma, which would be inefficient. */ |
| 1425 | flag = bfd_reloc_ok; |
| 1426 | if (howto->complain_on_overflow != complain_overflow_dont) |
| 1427 | { |
| 1428 | bfd_vma addrmask, fieldmask, signmask, ss; |
| 1429 | bfd_vma a, b, sum; |
| 1430 | |
| 1431 | /* Get the values to be added together. For signed and unsigned |
| 1432 | relocations, we assume that all values should be truncated to |
| 1433 | the size of an address. For bitfields, all the bits matter. |
| 1434 | See also bfd_check_overflow. */ |
| 1435 | fieldmask = N_ONES (howto->bitsize); |
| 1436 | signmask = ~fieldmask; |
| 1437 | addrmask = N_ONES (bfd_arch_bits_per_address (input_bfd)) | fieldmask; |
| 1438 | a = (relocation & addrmask) >> rightshift; |
| 1439 | b = (x & howto->src_mask & addrmask) >> bitpos; |
| 1440 | |
| 1441 | switch (howto->complain_on_overflow) |
| 1442 | { |
| 1443 | case complain_overflow_signed: |
| 1444 | /* If any sign bits are set, all sign bits must be set. |
| 1445 | That is, A must be a valid negative address after |
| 1446 | shifting. */ |
| 1447 | signmask = ~(fieldmask >> 1); |
| 1448 | /* Fall thru */ |
| 1449 | |
| 1450 | case complain_overflow_bitfield: |
| 1451 | /* Much like the signed check, but for a field one bit |
| 1452 | wider. We allow a bitfield to represent numbers in the |
| 1453 | range -2**n to 2**n-1, where n is the number of bits in the |
| 1454 | field. Note that when bfd_vma is 32 bits, a 32-bit reloc |
| 1455 | can't overflow, which is exactly what we want. */ |
| 1456 | ss = a & signmask; |
| 1457 | if (ss != 0 && ss != ((addrmask >> rightshift) & signmask)) |
| 1458 | flag = bfd_reloc_overflow; |
| 1459 | |
| 1460 | /* We only need this next bit of code if the sign bit of B |
| 1461 | is below the sign bit of A. This would only happen if |
| 1462 | SRC_MASK had fewer bits than BITSIZE. Note that if |
| 1463 | SRC_MASK has more bits than BITSIZE, we can get into |
| 1464 | trouble; we would need to verify that B is in range, as |
| 1465 | we do for A above. */ |
| 1466 | ss = ((~howto->src_mask) >> 1) & howto->src_mask; |
| 1467 | ss >>= bitpos; |
| 1468 | |
| 1469 | /* Set all the bits above the sign bit. */ |
| 1470 | b = (b ^ ss) - ss; |
| 1471 | |
| 1472 | /* Now we can do the addition. */ |
| 1473 | sum = a + b; |
| 1474 | |
| 1475 | /* See if the result has the correct sign. Bits above the |
| 1476 | sign bit are junk now; ignore them. If the sum is |
| 1477 | positive, make sure we did not have all negative inputs; |
| 1478 | if the sum is negative, make sure we did not have all |
| 1479 | positive inputs. The test below looks only at the sign |
| 1480 | bits, and it really just |
| 1481 | SIGN (A) == SIGN (B) && SIGN (A) != SIGN (SUM) |
| 1482 | |
| 1483 | We mask with addrmask here to explicitly allow an address |
| 1484 | wrap-around. The Linux kernel relies on it, and it is |
| 1485 | the only way to write assembler code which can run when |
| 1486 | loaded at a location 0x80000000 away from the location at |
| 1487 | which it is linked. */ |
| 1488 | if (((~(a ^ b)) & (a ^ sum)) & signmask & addrmask) |
| 1489 | flag = bfd_reloc_overflow; |
| 1490 | break; |
| 1491 | |
| 1492 | case complain_overflow_unsigned: |
| 1493 | /* Checking for an unsigned overflow is relatively easy: |
| 1494 | trim the addresses and add, and trim the result as well. |
| 1495 | Overflow is normally indicated when the result does not |
| 1496 | fit in the field. However, we also need to consider the |
| 1497 | case when, e.g., fieldmask is 0x7fffffff or smaller, an |
| 1498 | input is 0x80000000, and bfd_vma is only 32 bits; then we |
| 1499 | will get sum == 0, but there is an overflow, since the |
| 1500 | inputs did not fit in the field. Instead of doing a |
| 1501 | separate test, we can check for this by or-ing in the |
| 1502 | operands when testing for the sum overflowing its final |
| 1503 | field. */ |
| 1504 | sum = (a + b) & addrmask; |
| 1505 | if ((a | b | sum) & signmask) |
| 1506 | flag = bfd_reloc_overflow; |
| 1507 | break; |
| 1508 | |
| 1509 | default: |
| 1510 | abort (); |
| 1511 | } |
| 1512 | } |
| 1513 | |
| 1514 | /* Put RELOCATION in the right bits. */ |
| 1515 | relocation >>= (bfd_vma) rightshift; |
| 1516 | relocation <<= (bfd_vma) bitpos; |
| 1517 | |
| 1518 | /* Add RELOCATION to the right bits of X. */ |
| 1519 | x = ((x & ~howto->dst_mask) |
| 1520 | | (((x & howto->src_mask) + relocation) & howto->dst_mask)); |
| 1521 | |
| 1522 | /* Put the relocated value back in the object file. */ |
| 1523 | switch (size) |
| 1524 | { |
| 1525 | default: |
| 1526 | abort (); |
| 1527 | case 1: |
| 1528 | bfd_put_8 (input_bfd, x, location); |
| 1529 | break; |
| 1530 | case 2: |
| 1531 | bfd_put_16 (input_bfd, x, location); |
| 1532 | break; |
| 1533 | case 4: |
| 1534 | bfd_put_32 (input_bfd, x, location); |
| 1535 | break; |
| 1536 | case 8: |
| 1537 | #ifdef BFD64 |
| 1538 | bfd_put_64 (input_bfd, x, location); |
| 1539 | #else |
| 1540 | abort (); |
| 1541 | #endif |
| 1542 | break; |
| 1543 | } |
| 1544 | |
| 1545 | return flag; |
| 1546 | } |
| 1547 | |
| 1548 | /* Clear a given location using a given howto, by applying a relocation value |
| 1549 | of zero and discarding any in-place addend. This is used for fixed-up |
| 1550 | relocations against discarded symbols, to make ignorable debug or unwind |
| 1551 | information more obvious. */ |
| 1552 | |
| 1553 | void |
| 1554 | _bfd_clear_contents (reloc_howto_type *howto, |
| 1555 | bfd *input_bfd, |
| 1556 | bfd_byte *location) |
| 1557 | { |
| 1558 | int size; |
| 1559 | bfd_vma x = 0; |
| 1560 | |
| 1561 | /* Get the value we are going to relocate. */ |
| 1562 | size = bfd_get_reloc_size (howto); |
| 1563 | switch (size) |
| 1564 | { |
| 1565 | default: |
| 1566 | case 0: |
| 1567 | abort (); |
| 1568 | case 1: |
| 1569 | x = bfd_get_8 (input_bfd, location); |
| 1570 | break; |
| 1571 | case 2: |
| 1572 | x = bfd_get_16 (input_bfd, location); |
| 1573 | break; |
| 1574 | case 4: |
| 1575 | x = bfd_get_32 (input_bfd, location); |
| 1576 | break; |
| 1577 | case 8: |
| 1578 | #ifdef BFD64 |
| 1579 | x = bfd_get_64 (input_bfd, location); |
| 1580 | #else |
| 1581 | abort (); |
| 1582 | #endif |
| 1583 | break; |
| 1584 | } |
| 1585 | |
| 1586 | /* Zero out the unwanted bits of X. */ |
| 1587 | x &= ~howto->dst_mask; |
| 1588 | |
| 1589 | /* Put the relocated value back in the object file. */ |
| 1590 | switch (size) |
| 1591 | { |
| 1592 | default: |
| 1593 | case 0: |
| 1594 | abort (); |
| 1595 | case 1: |
| 1596 | bfd_put_8 (input_bfd, x, location); |
| 1597 | break; |
| 1598 | case 2: |
| 1599 | bfd_put_16 (input_bfd, x, location); |
| 1600 | break; |
| 1601 | case 4: |
| 1602 | bfd_put_32 (input_bfd, x, location); |
| 1603 | break; |
| 1604 | case 8: |
| 1605 | #ifdef BFD64 |
| 1606 | bfd_put_64 (input_bfd, x, location); |
| 1607 | #else |
| 1608 | abort (); |
| 1609 | #endif |
| 1610 | break; |
| 1611 | } |
| 1612 | } |
| 1613 | |
| 1614 | /* |
| 1615 | DOCDD |
| 1616 | INODE |
| 1617 | howto manager, , typedef arelent, Relocations |
| 1618 | |
| 1619 | SUBSECTION |
| 1620 | The howto manager |
| 1621 | |
| 1622 | When an application wants to create a relocation, but doesn't |
| 1623 | know what the target machine might call it, it can find out by |
| 1624 | using this bit of code. |
| 1625 | |
| 1626 | */ |
| 1627 | |
| 1628 | /* |
| 1629 | TYPEDEF |
| 1630 | bfd_reloc_code_type |
| 1631 | |
| 1632 | DESCRIPTION |
| 1633 | The insides of a reloc code. The idea is that, eventually, there |
| 1634 | will be one enumerator for every type of relocation we ever do. |
| 1635 | Pass one of these values to <<bfd_reloc_type_lookup>>, and it'll |
| 1636 | return a howto pointer. |
| 1637 | |
| 1638 | This does mean that the application must determine the correct |
| 1639 | enumerator value; you can't get a howto pointer from a random set |
| 1640 | of attributes. |
| 1641 | |
| 1642 | SENUM |
| 1643 | bfd_reloc_code_real |
| 1644 | |
| 1645 | ENUM |
| 1646 | BFD_RELOC_64 |
| 1647 | ENUMX |
| 1648 | BFD_RELOC_32 |
| 1649 | ENUMX |
| 1650 | BFD_RELOC_26 |
| 1651 | ENUMX |
| 1652 | BFD_RELOC_24 |
| 1653 | ENUMX |
| 1654 | BFD_RELOC_16 |
| 1655 | ENUMX |
| 1656 | BFD_RELOC_14 |
| 1657 | ENUMX |
| 1658 | BFD_RELOC_8 |
| 1659 | ENUMDOC |
| 1660 | Basic absolute relocations of N bits. |
| 1661 | |
| 1662 | ENUM |
| 1663 | BFD_RELOC_64_PCREL |
| 1664 | ENUMX |
| 1665 | BFD_RELOC_32_PCREL |
| 1666 | ENUMX |
| 1667 | BFD_RELOC_24_PCREL |
| 1668 | ENUMX |
| 1669 | BFD_RELOC_16_PCREL |
| 1670 | ENUMX |
| 1671 | BFD_RELOC_12_PCREL |
| 1672 | ENUMX |
| 1673 | BFD_RELOC_8_PCREL |
| 1674 | ENUMDOC |
| 1675 | PC-relative relocations. Sometimes these are relative to the address |
| 1676 | of the relocation itself; sometimes they are relative to the start of |
| 1677 | the section containing the relocation. It depends on the specific target. |
| 1678 | |
| 1679 | The 24-bit relocation is used in some Intel 960 configurations. |
| 1680 | |
| 1681 | ENUM |
| 1682 | BFD_RELOC_32_SECREL |
| 1683 | ENUMDOC |
| 1684 | Section relative relocations. Some targets need this for DWARF2. |
| 1685 | |
| 1686 | ENUM |
| 1687 | BFD_RELOC_32_GOT_PCREL |
| 1688 | ENUMX |
| 1689 | BFD_RELOC_16_GOT_PCREL |
| 1690 | ENUMX |
| 1691 | BFD_RELOC_8_GOT_PCREL |
| 1692 | ENUMX |
| 1693 | BFD_RELOC_32_GOTOFF |
| 1694 | ENUMX |
| 1695 | BFD_RELOC_16_GOTOFF |
| 1696 | ENUMX |
| 1697 | BFD_RELOC_LO16_GOTOFF |
| 1698 | ENUMX |
| 1699 | BFD_RELOC_HI16_GOTOFF |
| 1700 | ENUMX |
| 1701 | BFD_RELOC_HI16_S_GOTOFF |
| 1702 | ENUMX |
| 1703 | BFD_RELOC_8_GOTOFF |
| 1704 | ENUMX |
| 1705 | BFD_RELOC_64_PLT_PCREL |
| 1706 | ENUMX |
| 1707 | BFD_RELOC_32_PLT_PCREL |
| 1708 | ENUMX |
| 1709 | BFD_RELOC_24_PLT_PCREL |
| 1710 | ENUMX |
| 1711 | BFD_RELOC_16_PLT_PCREL |
| 1712 | ENUMX |
| 1713 | BFD_RELOC_8_PLT_PCREL |
| 1714 | ENUMX |
| 1715 | BFD_RELOC_64_PLTOFF |
| 1716 | ENUMX |
| 1717 | BFD_RELOC_32_PLTOFF |
| 1718 | ENUMX |
| 1719 | BFD_RELOC_16_PLTOFF |
| 1720 | ENUMX |
| 1721 | BFD_RELOC_LO16_PLTOFF |
| 1722 | ENUMX |
| 1723 | BFD_RELOC_HI16_PLTOFF |
| 1724 | ENUMX |
| 1725 | BFD_RELOC_HI16_S_PLTOFF |
| 1726 | ENUMX |
| 1727 | BFD_RELOC_8_PLTOFF |
| 1728 | ENUMDOC |
| 1729 | For ELF. |
| 1730 | |
| 1731 | ENUM |
| 1732 | BFD_RELOC_68K_GLOB_DAT |
| 1733 | ENUMX |
| 1734 | BFD_RELOC_68K_JMP_SLOT |
| 1735 | ENUMX |
| 1736 | BFD_RELOC_68K_RELATIVE |
| 1737 | ENUMX |
| 1738 | BFD_RELOC_68K_TLS_GD32 |
| 1739 | ENUMX |
| 1740 | BFD_RELOC_68K_TLS_GD16 |
| 1741 | ENUMX |
| 1742 | BFD_RELOC_68K_TLS_GD8 |
| 1743 | ENUMX |
| 1744 | BFD_RELOC_68K_TLS_LDM32 |
| 1745 | ENUMX |
| 1746 | BFD_RELOC_68K_TLS_LDM16 |
| 1747 | ENUMX |
| 1748 | BFD_RELOC_68K_TLS_LDM8 |
| 1749 | ENUMX |
| 1750 | BFD_RELOC_68K_TLS_LDO32 |
| 1751 | ENUMX |
| 1752 | BFD_RELOC_68K_TLS_LDO16 |
| 1753 | ENUMX |
| 1754 | BFD_RELOC_68K_TLS_LDO8 |
| 1755 | ENUMX |
| 1756 | BFD_RELOC_68K_TLS_IE32 |
| 1757 | ENUMX |
| 1758 | BFD_RELOC_68K_TLS_IE16 |
| 1759 | ENUMX |
| 1760 | BFD_RELOC_68K_TLS_IE8 |
| 1761 | ENUMX |
| 1762 | BFD_RELOC_68K_TLS_LE32 |
| 1763 | ENUMX |
| 1764 | BFD_RELOC_68K_TLS_LE16 |
| 1765 | ENUMX |
| 1766 | BFD_RELOC_68K_TLS_LE8 |
| 1767 | ENUMDOC |
| 1768 | Relocations used by 68K ELF. |
| 1769 | |
| 1770 | ENUM |
| 1771 | BFD_RELOC_32_BASEREL |
| 1772 | ENUMX |
| 1773 | BFD_RELOC_16_BASEREL |
| 1774 | ENUMX |
| 1775 | BFD_RELOC_LO16_BASEREL |
| 1776 | ENUMX |
| 1777 | BFD_RELOC_HI16_BASEREL |
| 1778 | ENUMX |
| 1779 | BFD_RELOC_HI16_S_BASEREL |
| 1780 | ENUMX |
| 1781 | BFD_RELOC_8_BASEREL |
| 1782 | ENUMX |
| 1783 | BFD_RELOC_RVA |
| 1784 | ENUMDOC |
| 1785 | Linkage-table relative. |
| 1786 | |
| 1787 | ENUM |
| 1788 | BFD_RELOC_8_FFnn |
| 1789 | ENUMDOC |
| 1790 | Absolute 8-bit relocation, but used to form an address like 0xFFnn. |
| 1791 | |
| 1792 | ENUM |
| 1793 | BFD_RELOC_32_PCREL_S2 |
| 1794 | ENUMX |
| 1795 | BFD_RELOC_16_PCREL_S2 |
| 1796 | ENUMX |
| 1797 | BFD_RELOC_23_PCREL_S2 |
| 1798 | ENUMDOC |
| 1799 | These PC-relative relocations are stored as word displacements -- |
| 1800 | i.e., byte displacements shifted right two bits. The 30-bit word |
| 1801 | displacement (<<32_PCREL_S2>> -- 32 bits, shifted 2) is used on the |
| 1802 | SPARC. (SPARC tools generally refer to this as <<WDISP30>>.) The |
| 1803 | signed 16-bit displacement is used on the MIPS, and the 23-bit |
| 1804 | displacement is used on the Alpha. |
| 1805 | |
| 1806 | ENUM |
| 1807 | BFD_RELOC_HI22 |
| 1808 | ENUMX |
| 1809 | BFD_RELOC_LO10 |
| 1810 | ENUMDOC |
| 1811 | High 22 bits and low 10 bits of 32-bit value, placed into lower bits of |
| 1812 | the target word. These are used on the SPARC. |
| 1813 | |
| 1814 | ENUM |
| 1815 | BFD_RELOC_GPREL16 |
| 1816 | ENUMX |
| 1817 | BFD_RELOC_GPREL32 |
| 1818 | ENUMDOC |
| 1819 | For systems that allocate a Global Pointer register, these are |
| 1820 | displacements off that register. These relocation types are |
| 1821 | handled specially, because the value the register will have is |
| 1822 | decided relatively late. |
| 1823 | |
| 1824 | ENUM |
| 1825 | BFD_RELOC_I960_CALLJ |
| 1826 | ENUMDOC |
| 1827 | Reloc types used for i960/b.out. |
| 1828 | |
| 1829 | ENUM |
| 1830 | BFD_RELOC_NONE |
| 1831 | ENUMX |
| 1832 | BFD_RELOC_SPARC_WDISP22 |
| 1833 | ENUMX |
| 1834 | BFD_RELOC_SPARC22 |
| 1835 | ENUMX |
| 1836 | BFD_RELOC_SPARC13 |
| 1837 | ENUMX |
| 1838 | BFD_RELOC_SPARC_GOT10 |
| 1839 | ENUMX |
| 1840 | BFD_RELOC_SPARC_GOT13 |
| 1841 | ENUMX |
| 1842 | BFD_RELOC_SPARC_GOT22 |
| 1843 | ENUMX |
| 1844 | BFD_RELOC_SPARC_PC10 |
| 1845 | ENUMX |
| 1846 | BFD_RELOC_SPARC_PC22 |
| 1847 | ENUMX |
| 1848 | BFD_RELOC_SPARC_WPLT30 |
| 1849 | ENUMX |
| 1850 | BFD_RELOC_SPARC_COPY |
| 1851 | ENUMX |
| 1852 | BFD_RELOC_SPARC_GLOB_DAT |
| 1853 | ENUMX |
| 1854 | BFD_RELOC_SPARC_JMP_SLOT |
| 1855 | ENUMX |
| 1856 | BFD_RELOC_SPARC_RELATIVE |
| 1857 | ENUMX |
| 1858 | BFD_RELOC_SPARC_UA16 |
| 1859 | ENUMX |
| 1860 | BFD_RELOC_SPARC_UA32 |
| 1861 | ENUMX |
| 1862 | BFD_RELOC_SPARC_UA64 |
| 1863 | ENUMX |
| 1864 | BFD_RELOC_SPARC_GOTDATA_HIX22 |
| 1865 | ENUMX |
| 1866 | BFD_RELOC_SPARC_GOTDATA_LOX10 |
| 1867 | ENUMX |
| 1868 | BFD_RELOC_SPARC_GOTDATA_OP_HIX22 |
| 1869 | ENUMX |
| 1870 | BFD_RELOC_SPARC_GOTDATA_OP_LOX10 |
| 1871 | ENUMX |
| 1872 | BFD_RELOC_SPARC_GOTDATA_OP |
| 1873 | ENUMDOC |
| 1874 | SPARC ELF relocations. There is probably some overlap with other |
| 1875 | relocation types already defined. |
| 1876 | |
| 1877 | ENUM |
| 1878 | BFD_RELOC_SPARC_BASE13 |
| 1879 | ENUMX |
| 1880 | BFD_RELOC_SPARC_BASE22 |
| 1881 | ENUMDOC |
| 1882 | I think these are specific to SPARC a.out (e.g., Sun 4). |
| 1883 | |
| 1884 | ENUMEQ |
| 1885 | BFD_RELOC_SPARC_64 |
| 1886 | BFD_RELOC_64 |
| 1887 | ENUMX |
| 1888 | BFD_RELOC_SPARC_10 |
| 1889 | ENUMX |
| 1890 | BFD_RELOC_SPARC_11 |
| 1891 | ENUMX |
| 1892 | BFD_RELOC_SPARC_OLO10 |
| 1893 | ENUMX |
| 1894 | BFD_RELOC_SPARC_HH22 |
| 1895 | ENUMX |
| 1896 | BFD_RELOC_SPARC_HM10 |
| 1897 | ENUMX |
| 1898 | BFD_RELOC_SPARC_LM22 |
| 1899 | ENUMX |
| 1900 | BFD_RELOC_SPARC_PC_HH22 |
| 1901 | ENUMX |
| 1902 | BFD_RELOC_SPARC_PC_HM10 |
| 1903 | ENUMX |
| 1904 | BFD_RELOC_SPARC_PC_LM22 |
| 1905 | ENUMX |
| 1906 | BFD_RELOC_SPARC_WDISP16 |
| 1907 | ENUMX |
| 1908 | BFD_RELOC_SPARC_WDISP19 |
| 1909 | ENUMX |
| 1910 | BFD_RELOC_SPARC_7 |
| 1911 | ENUMX |
| 1912 | BFD_RELOC_SPARC_6 |
| 1913 | ENUMX |
| 1914 | BFD_RELOC_SPARC_5 |
| 1915 | ENUMEQX |
| 1916 | BFD_RELOC_SPARC_DISP64 |
| 1917 | BFD_RELOC_64_PCREL |
| 1918 | ENUMX |
| 1919 | BFD_RELOC_SPARC_PLT32 |
| 1920 | ENUMX |
| 1921 | BFD_RELOC_SPARC_PLT64 |
| 1922 | ENUMX |
| 1923 | BFD_RELOC_SPARC_HIX22 |
| 1924 | ENUMX |
| 1925 | BFD_RELOC_SPARC_LOX10 |
| 1926 | ENUMX |
| 1927 | BFD_RELOC_SPARC_H44 |
| 1928 | ENUMX |
| 1929 | BFD_RELOC_SPARC_M44 |
| 1930 | ENUMX |
| 1931 | BFD_RELOC_SPARC_L44 |
| 1932 | ENUMX |
| 1933 | BFD_RELOC_SPARC_REGISTER |
| 1934 | ENUMDOC |
| 1935 | SPARC64 relocations |
| 1936 | |
| 1937 | ENUM |
| 1938 | BFD_RELOC_SPARC_REV32 |
| 1939 | ENUMDOC |
| 1940 | SPARC little endian relocation |
| 1941 | ENUM |
| 1942 | BFD_RELOC_SPARC_TLS_GD_HI22 |
| 1943 | ENUMX |
| 1944 | BFD_RELOC_SPARC_TLS_GD_LO10 |
| 1945 | ENUMX |
| 1946 | BFD_RELOC_SPARC_TLS_GD_ADD |
| 1947 | ENUMX |
| 1948 | BFD_RELOC_SPARC_TLS_GD_CALL |
| 1949 | ENUMX |
| 1950 | BFD_RELOC_SPARC_TLS_LDM_HI22 |
| 1951 | ENUMX |
| 1952 | BFD_RELOC_SPARC_TLS_LDM_LO10 |
| 1953 | ENUMX |
| 1954 | BFD_RELOC_SPARC_TLS_LDM_ADD |
| 1955 | ENUMX |
| 1956 | BFD_RELOC_SPARC_TLS_LDM_CALL |
| 1957 | ENUMX |
| 1958 | BFD_RELOC_SPARC_TLS_LDO_HIX22 |
| 1959 | ENUMX |
| 1960 | BFD_RELOC_SPARC_TLS_LDO_LOX10 |
| 1961 | ENUMX |
| 1962 | BFD_RELOC_SPARC_TLS_LDO_ADD |
| 1963 | ENUMX |
| 1964 | BFD_RELOC_SPARC_TLS_IE_HI22 |
| 1965 | ENUMX |
| 1966 | BFD_RELOC_SPARC_TLS_IE_LO10 |
| 1967 | ENUMX |
| 1968 | BFD_RELOC_SPARC_TLS_IE_LD |
| 1969 | ENUMX |
| 1970 | BFD_RELOC_SPARC_TLS_IE_LDX |
| 1971 | ENUMX |
| 1972 | BFD_RELOC_SPARC_TLS_IE_ADD |
| 1973 | ENUMX |
| 1974 | BFD_RELOC_SPARC_TLS_LE_HIX22 |
| 1975 | ENUMX |
| 1976 | BFD_RELOC_SPARC_TLS_LE_LOX10 |
| 1977 | ENUMX |
| 1978 | BFD_RELOC_SPARC_TLS_DTPMOD32 |
| 1979 | ENUMX |
| 1980 | BFD_RELOC_SPARC_TLS_DTPMOD64 |
| 1981 | ENUMX |
| 1982 | BFD_RELOC_SPARC_TLS_DTPOFF32 |
| 1983 | ENUMX |
| 1984 | BFD_RELOC_SPARC_TLS_DTPOFF64 |
| 1985 | ENUMX |
| 1986 | BFD_RELOC_SPARC_TLS_TPOFF32 |
| 1987 | ENUMX |
| 1988 | BFD_RELOC_SPARC_TLS_TPOFF64 |
| 1989 | ENUMDOC |
| 1990 | SPARC TLS relocations |
| 1991 | |
| 1992 | ENUM |
| 1993 | BFD_RELOC_SPU_IMM7 |
| 1994 | ENUMX |
| 1995 | BFD_RELOC_SPU_IMM8 |
| 1996 | ENUMX |
| 1997 | BFD_RELOC_SPU_IMM10 |
| 1998 | ENUMX |
| 1999 | BFD_RELOC_SPU_IMM10W |
| 2000 | ENUMX |
| 2001 | BFD_RELOC_SPU_IMM16 |
| 2002 | ENUMX |
| 2003 | BFD_RELOC_SPU_IMM16W |
| 2004 | ENUMX |
| 2005 | BFD_RELOC_SPU_IMM18 |
| 2006 | ENUMX |
| 2007 | BFD_RELOC_SPU_PCREL9a |
| 2008 | ENUMX |
| 2009 | BFD_RELOC_SPU_PCREL9b |
| 2010 | ENUMX |
| 2011 | BFD_RELOC_SPU_PCREL16 |
| 2012 | ENUMX |
| 2013 | BFD_RELOC_SPU_LO16 |
| 2014 | ENUMX |
| 2015 | BFD_RELOC_SPU_HI16 |
| 2016 | ENUMX |
| 2017 | BFD_RELOC_SPU_PPU32 |
| 2018 | ENUMX |
| 2019 | BFD_RELOC_SPU_PPU64 |
| 2020 | ENUMDOC |
| 2021 | SPU Relocations. |
| 2022 | |
| 2023 | ENUM |
| 2024 | BFD_RELOC_ALPHA_GPDISP_HI16 |
| 2025 | ENUMDOC |
| 2026 | Alpha ECOFF and ELF relocations. Some of these treat the symbol or |
| 2027 | "addend" in some special way. |
| 2028 | For GPDISP_HI16 ("gpdisp") relocations, the symbol is ignored when |
| 2029 | writing; when reading, it will be the absolute section symbol. The |
| 2030 | addend is the displacement in bytes of the "lda" instruction from |
| 2031 | the "ldah" instruction (which is at the address of this reloc). |
| 2032 | ENUM |
| 2033 | BFD_RELOC_ALPHA_GPDISP_LO16 |
| 2034 | ENUMDOC |
| 2035 | For GPDISP_LO16 ("ignore") relocations, the symbol is handled as |
| 2036 | with GPDISP_HI16 relocs. The addend is ignored when writing the |
| 2037 | relocations out, and is filled in with the file's GP value on |
| 2038 | reading, for convenience. |
| 2039 | |
| 2040 | ENUM |
| 2041 | BFD_RELOC_ALPHA_GPDISP |
| 2042 | ENUMDOC |
| 2043 | The ELF GPDISP relocation is exactly the same as the GPDISP_HI16 |
| 2044 | relocation except that there is no accompanying GPDISP_LO16 |
| 2045 | relocation. |
| 2046 | |
| 2047 | ENUM |
| 2048 | BFD_RELOC_ALPHA_LITERAL |
| 2049 | ENUMX |
| 2050 | BFD_RELOC_ALPHA_ELF_LITERAL |
| 2051 | ENUMX |
| 2052 | BFD_RELOC_ALPHA_LITUSE |
| 2053 | ENUMDOC |
| 2054 | The Alpha LITERAL/LITUSE relocs are produced by a symbol reference; |
| 2055 | the assembler turns it into a LDQ instruction to load the address of |
| 2056 | the symbol, and then fills in a register in the real instruction. |
| 2057 | |
| 2058 | The LITERAL reloc, at the LDQ instruction, refers to the .lita |
| 2059 | section symbol. The addend is ignored when writing, but is filled |
| 2060 | in with the file's GP value on reading, for convenience, as with the |
| 2061 | GPDISP_LO16 reloc. |
| 2062 | |
| 2063 | The ELF_LITERAL reloc is somewhere between 16_GOTOFF and GPDISP_LO16. |
| 2064 | It should refer to the symbol to be referenced, as with 16_GOTOFF, |
| 2065 | but it generates output not based on the position within the .got |
| 2066 | section, but relative to the GP value chosen for the file during the |
| 2067 | final link stage. |
| 2068 | |
| 2069 | The LITUSE reloc, on the instruction using the loaded address, gives |
| 2070 | information to the linker that it might be able to use to optimize |
| 2071 | away some literal section references. The symbol is ignored (read |
| 2072 | as the absolute section symbol), and the "addend" indicates the type |
| 2073 | of instruction using the register: |
| 2074 | 1 - "memory" fmt insn |
| 2075 | 2 - byte-manipulation (byte offset reg) |
| 2076 | 3 - jsr (target of branch) |
| 2077 | |
| 2078 | ENUM |
| 2079 | BFD_RELOC_ALPHA_HINT |
| 2080 | ENUMDOC |
| 2081 | The HINT relocation indicates a value that should be filled into the |
| 2082 | "hint" field of a jmp/jsr/ret instruction, for possible branch- |
| 2083 | prediction logic which may be provided on some processors. |
| 2084 | |
| 2085 | ENUM |
| 2086 | BFD_RELOC_ALPHA_LINKAGE |
| 2087 | ENUMDOC |
| 2088 | The LINKAGE relocation outputs a linkage pair in the object file, |
| 2089 | which is filled by the linker. |
| 2090 | |
| 2091 | ENUM |
| 2092 | BFD_RELOC_ALPHA_CODEADDR |
| 2093 | ENUMDOC |
| 2094 | The CODEADDR relocation outputs a STO_CA in the object file, |
| 2095 | which is filled by the linker. |
| 2096 | |
| 2097 | ENUM |
| 2098 | BFD_RELOC_ALPHA_GPREL_HI16 |
| 2099 | ENUMX |
| 2100 | BFD_RELOC_ALPHA_GPREL_LO16 |
| 2101 | ENUMDOC |
| 2102 | The GPREL_HI/LO relocations together form a 32-bit offset from the |
| 2103 | GP register. |
| 2104 | |
| 2105 | ENUM |
| 2106 | BFD_RELOC_ALPHA_BRSGP |
| 2107 | ENUMDOC |
| 2108 | Like BFD_RELOC_23_PCREL_S2, except that the source and target must |
| 2109 | share a common GP, and the target address is adjusted for |
| 2110 | STO_ALPHA_STD_GPLOAD. |
| 2111 | |
| 2112 | ENUM |
| 2113 | BFD_RELOC_ALPHA_NOP |
| 2114 | ENUMDOC |
| 2115 | The NOP relocation outputs a NOP if the longword displacement |
| 2116 | between two procedure entry points is < 2^21. |
| 2117 | |
| 2118 | ENUM |
| 2119 | BFD_RELOC_ALPHA_BSR |
| 2120 | ENUMDOC |
| 2121 | The BSR relocation outputs a BSR if the longword displacement |
| 2122 | between two procedure entry points is < 2^21. |
| 2123 | |
| 2124 | ENUM |
| 2125 | BFD_RELOC_ALPHA_LDA |
| 2126 | ENUMDOC |
| 2127 | The LDA relocation outputs a LDA if the longword displacement |
| 2128 | between two procedure entry points is < 2^16. |
| 2129 | |
| 2130 | ENUM |
| 2131 | BFD_RELOC_ALPHA_BOH |
| 2132 | ENUMDOC |
| 2133 | The BOH relocation outputs a BSR if the longword displacement |
| 2134 | between two procedure entry points is < 2^21, or else a hint. |
| 2135 | |
| 2136 | ENUM |
| 2137 | BFD_RELOC_ALPHA_TLSGD |
| 2138 | ENUMX |
| 2139 | BFD_RELOC_ALPHA_TLSLDM |
| 2140 | ENUMX |
| 2141 | BFD_RELOC_ALPHA_DTPMOD64 |
| 2142 | ENUMX |
| 2143 | BFD_RELOC_ALPHA_GOTDTPREL16 |
| 2144 | ENUMX |
| 2145 | BFD_RELOC_ALPHA_DTPREL64 |
| 2146 | ENUMX |
| 2147 | BFD_RELOC_ALPHA_DTPREL_HI16 |
| 2148 | ENUMX |
| 2149 | BFD_RELOC_ALPHA_DTPREL_LO16 |
| 2150 | ENUMX |
| 2151 | BFD_RELOC_ALPHA_DTPREL16 |
| 2152 | ENUMX |
| 2153 | BFD_RELOC_ALPHA_GOTTPREL16 |
| 2154 | ENUMX |
| 2155 | BFD_RELOC_ALPHA_TPREL64 |
| 2156 | ENUMX |
| 2157 | BFD_RELOC_ALPHA_TPREL_HI16 |
| 2158 | ENUMX |
| 2159 | BFD_RELOC_ALPHA_TPREL_LO16 |
| 2160 | ENUMX |
| 2161 | BFD_RELOC_ALPHA_TPREL16 |
| 2162 | ENUMDOC |
| 2163 | Alpha thread-local storage relocations. |
| 2164 | |
| 2165 | ENUM |
| 2166 | BFD_RELOC_MIPS_JMP |
| 2167 | ENUMDOC |
| 2168 | Bits 27..2 of the relocation address shifted right 2 bits; |
| 2169 | simple reloc otherwise. |
| 2170 | |
| 2171 | ENUM |
| 2172 | BFD_RELOC_MIPS16_JMP |
| 2173 | ENUMDOC |
| 2174 | The MIPS16 jump instruction. |
| 2175 | |
| 2176 | ENUM |
| 2177 | BFD_RELOC_MIPS16_GPREL |
| 2178 | ENUMDOC |
| 2179 | MIPS16 GP relative reloc. |
| 2180 | |
| 2181 | ENUM |
| 2182 | BFD_RELOC_HI16 |
| 2183 | ENUMDOC |
| 2184 | High 16 bits of 32-bit value; simple reloc. |
| 2185 | ENUM |
| 2186 | BFD_RELOC_HI16_S |
| 2187 | ENUMDOC |
| 2188 | High 16 bits of 32-bit value but the low 16 bits will be sign |
| 2189 | extended and added to form the final result. If the low 16 |
| 2190 | bits form a negative number, we need to add one to the high value |
| 2191 | to compensate for the borrow when the low bits are added. |
| 2192 | ENUM |
| 2193 | BFD_RELOC_LO16 |
| 2194 | ENUMDOC |
| 2195 | Low 16 bits. |
| 2196 | |
| 2197 | ENUM |
| 2198 | BFD_RELOC_HI16_PCREL |
| 2199 | ENUMDOC |
| 2200 | High 16 bits of 32-bit pc-relative value |
| 2201 | ENUM |
| 2202 | BFD_RELOC_HI16_S_PCREL |
| 2203 | ENUMDOC |
| 2204 | High 16 bits of 32-bit pc-relative value, adjusted |
| 2205 | ENUM |
| 2206 | BFD_RELOC_LO16_PCREL |
| 2207 | ENUMDOC |
| 2208 | Low 16 bits of pc-relative value |
| 2209 | |
| 2210 | ENUM |
| 2211 | BFD_RELOC_MIPS16_GOT16 |
| 2212 | ENUMX |
| 2213 | BFD_RELOC_MIPS16_CALL16 |
| 2214 | ENUMDOC |
| 2215 | Equivalent of BFD_RELOC_MIPS_*, but with the MIPS16 layout of |
| 2216 | 16-bit immediate fields |
| 2217 | ENUM |
| 2218 | BFD_RELOC_MIPS16_HI16 |
| 2219 | ENUMDOC |
| 2220 | MIPS16 high 16 bits of 32-bit value. |
| 2221 | ENUM |
| 2222 | BFD_RELOC_MIPS16_HI16_S |
| 2223 | ENUMDOC |
| 2224 | MIPS16 high 16 bits of 32-bit value but the low 16 bits will be sign |
| 2225 | extended and added to form the final result. If the low 16 |
| 2226 | bits form a negative number, we need to add one to the high value |
| 2227 | to compensate for the borrow when the low bits are added. |
| 2228 | ENUM |
| 2229 | BFD_RELOC_MIPS16_LO16 |
| 2230 | ENUMDOC |
| 2231 | MIPS16 low 16 bits. |
| 2232 | |
| 2233 | ENUM |
| 2234 | BFD_RELOC_MIPS_LITERAL |
| 2235 | ENUMDOC |
| 2236 | Relocation against a MIPS literal section. |
| 2237 | |
| 2238 | ENUM |
| 2239 | BFD_RELOC_MIPS_GOT16 |
| 2240 | ENUMX |
| 2241 | BFD_RELOC_MIPS_CALL16 |
| 2242 | ENUMX |
| 2243 | BFD_RELOC_MIPS_GOT_HI16 |
| 2244 | ENUMX |
| 2245 | BFD_RELOC_MIPS_GOT_LO16 |
| 2246 | ENUMX |
| 2247 | BFD_RELOC_MIPS_CALL_HI16 |
| 2248 | ENUMX |
| 2249 | BFD_RELOC_MIPS_CALL_LO16 |
| 2250 | ENUMX |
| 2251 | BFD_RELOC_MIPS_SUB |
| 2252 | ENUMX |
| 2253 | BFD_RELOC_MIPS_GOT_PAGE |
| 2254 | ENUMX |
| 2255 | BFD_RELOC_MIPS_GOT_OFST |
| 2256 | ENUMX |
| 2257 | BFD_RELOC_MIPS_GOT_DISP |
| 2258 | ENUMX |
| 2259 | BFD_RELOC_MIPS_SHIFT5 |
| 2260 | ENUMX |
| 2261 | BFD_RELOC_MIPS_SHIFT6 |
| 2262 | ENUMX |
| 2263 | BFD_RELOC_MIPS_INSERT_A |
| 2264 | ENUMX |
| 2265 | BFD_RELOC_MIPS_INSERT_B |
| 2266 | ENUMX |
| 2267 | BFD_RELOC_MIPS_DELETE |
| 2268 | ENUMX |
| 2269 | BFD_RELOC_MIPS_HIGHEST |
| 2270 | ENUMX |
| 2271 | BFD_RELOC_MIPS_HIGHER |
| 2272 | ENUMX |
| 2273 | BFD_RELOC_MIPS_SCN_DISP |
| 2274 | ENUMX |
| 2275 | BFD_RELOC_MIPS_REL16 |
| 2276 | ENUMX |
| 2277 | BFD_RELOC_MIPS_RELGOT |
| 2278 | ENUMX |
| 2279 | BFD_RELOC_MIPS_JALR |
| 2280 | ENUMX |
| 2281 | BFD_RELOC_MIPS_TLS_DTPMOD32 |
| 2282 | ENUMX |
| 2283 | BFD_RELOC_MIPS_TLS_DTPREL32 |
| 2284 | ENUMX |
| 2285 | BFD_RELOC_MIPS_TLS_DTPMOD64 |
| 2286 | ENUMX |
| 2287 | BFD_RELOC_MIPS_TLS_DTPREL64 |
| 2288 | ENUMX |
| 2289 | BFD_RELOC_MIPS_TLS_GD |
| 2290 | ENUMX |
| 2291 | BFD_RELOC_MIPS_TLS_LDM |
| 2292 | ENUMX |
| 2293 | BFD_RELOC_MIPS_TLS_DTPREL_HI16 |
| 2294 | ENUMX |
| 2295 | BFD_RELOC_MIPS_TLS_DTPREL_LO16 |
| 2296 | ENUMX |
| 2297 | BFD_RELOC_MIPS_TLS_GOTTPREL |
| 2298 | ENUMX |
| 2299 | BFD_RELOC_MIPS_TLS_TPREL32 |
| 2300 | ENUMX |
| 2301 | BFD_RELOC_MIPS_TLS_TPREL64 |
| 2302 | ENUMX |
| 2303 | BFD_RELOC_MIPS_TLS_TPREL_HI16 |
| 2304 | ENUMX |
| 2305 | BFD_RELOC_MIPS_TLS_TPREL_LO16 |
| 2306 | ENUMDOC |
| 2307 | MIPS ELF relocations. |
| 2308 | COMMENT |
| 2309 | |
| 2310 | ENUM |
| 2311 | BFD_RELOC_MIPS_COPY |
| 2312 | ENUMX |
| 2313 | BFD_RELOC_MIPS_JUMP_SLOT |
| 2314 | ENUMDOC |
| 2315 | MIPS ELF relocations (VxWorks and PLT extensions). |
| 2316 | COMMENT |
| 2317 | |
| 2318 | ENUM |
| 2319 | BFD_RELOC_FRV_LABEL16 |
| 2320 | ENUMX |
| 2321 | BFD_RELOC_FRV_LABEL24 |
| 2322 | ENUMX |
| 2323 | BFD_RELOC_FRV_LO16 |
| 2324 | ENUMX |
| 2325 | BFD_RELOC_FRV_HI16 |
| 2326 | ENUMX |
| 2327 | BFD_RELOC_FRV_GPREL12 |
| 2328 | ENUMX |
| 2329 | BFD_RELOC_FRV_GPRELU12 |
| 2330 | ENUMX |
| 2331 | BFD_RELOC_FRV_GPREL32 |
| 2332 | ENUMX |
| 2333 | BFD_RELOC_FRV_GPRELHI |
| 2334 | ENUMX |
| 2335 | BFD_RELOC_FRV_GPRELLO |
| 2336 | ENUMX |
| 2337 | BFD_RELOC_FRV_GOT12 |
| 2338 | ENUMX |
| 2339 | BFD_RELOC_FRV_GOTHI |
| 2340 | ENUMX |
| 2341 | BFD_RELOC_FRV_GOTLO |
| 2342 | ENUMX |
| 2343 | BFD_RELOC_FRV_FUNCDESC |
| 2344 | ENUMX |
| 2345 | BFD_RELOC_FRV_FUNCDESC_GOT12 |
| 2346 | ENUMX |
| 2347 | BFD_RELOC_FRV_FUNCDESC_GOTHI |
| 2348 | ENUMX |
| 2349 | BFD_RELOC_FRV_FUNCDESC_GOTLO |
| 2350 | ENUMX |
| 2351 | BFD_RELOC_FRV_FUNCDESC_VALUE |
| 2352 | ENUMX |
| 2353 | BFD_RELOC_FRV_FUNCDESC_GOTOFF12 |
| 2354 | ENUMX |
| 2355 | BFD_RELOC_FRV_FUNCDESC_GOTOFFHI |
| 2356 | ENUMX |
| 2357 | BFD_RELOC_FRV_FUNCDESC_GOTOFFLO |
| 2358 | ENUMX |
| 2359 | BFD_RELOC_FRV_GOTOFF12 |
| 2360 | ENUMX |
| 2361 | BFD_RELOC_FRV_GOTOFFHI |
| 2362 | ENUMX |
| 2363 | BFD_RELOC_FRV_GOTOFFLO |
| 2364 | ENUMX |
| 2365 | BFD_RELOC_FRV_GETTLSOFF |
| 2366 | ENUMX |
| 2367 | BFD_RELOC_FRV_TLSDESC_VALUE |
| 2368 | ENUMX |
| 2369 | BFD_RELOC_FRV_GOTTLSDESC12 |
| 2370 | ENUMX |
| 2371 | BFD_RELOC_FRV_GOTTLSDESCHI |
| 2372 | ENUMX |
| 2373 | BFD_RELOC_FRV_GOTTLSDESCLO |
| 2374 | ENUMX |
| 2375 | BFD_RELOC_FRV_TLSMOFF12 |
| 2376 | ENUMX |
| 2377 | BFD_RELOC_FRV_TLSMOFFHI |
| 2378 | ENUMX |
| 2379 | BFD_RELOC_FRV_TLSMOFFLO |
| 2380 | ENUMX |
| 2381 | BFD_RELOC_FRV_GOTTLSOFF12 |
| 2382 | ENUMX |
| 2383 | BFD_RELOC_FRV_GOTTLSOFFHI |
| 2384 | ENUMX |
| 2385 | BFD_RELOC_FRV_GOTTLSOFFLO |
| 2386 | ENUMX |
| 2387 | BFD_RELOC_FRV_TLSOFF |
| 2388 | ENUMX |
| 2389 | BFD_RELOC_FRV_TLSDESC_RELAX |
| 2390 | ENUMX |
| 2391 | BFD_RELOC_FRV_GETTLSOFF_RELAX |
| 2392 | ENUMX |
| 2393 | BFD_RELOC_FRV_TLSOFF_RELAX |
| 2394 | ENUMX |
| 2395 | BFD_RELOC_FRV_TLSMOFF |
| 2396 | ENUMDOC |
| 2397 | Fujitsu Frv Relocations. |
| 2398 | COMMENT |
| 2399 | |
| 2400 | ENUM |
| 2401 | BFD_RELOC_MN10300_GOTOFF24 |
| 2402 | ENUMDOC |
| 2403 | This is a 24bit GOT-relative reloc for the mn10300. |
| 2404 | ENUM |
| 2405 | BFD_RELOC_MN10300_GOT32 |
| 2406 | ENUMDOC |
| 2407 | This is a 32bit GOT-relative reloc for the mn10300, offset by two bytes |
| 2408 | in the instruction. |
| 2409 | ENUM |
| 2410 | BFD_RELOC_MN10300_GOT24 |
| 2411 | ENUMDOC |
| 2412 | This is a 24bit GOT-relative reloc for the mn10300, offset by two bytes |
| 2413 | in the instruction. |
| 2414 | ENUM |
| 2415 | BFD_RELOC_MN10300_GOT16 |
| 2416 | ENUMDOC |
| 2417 | This is a 16bit GOT-relative reloc for the mn10300, offset by two bytes |
| 2418 | in the instruction. |
| 2419 | ENUM |
| 2420 | BFD_RELOC_MN10300_COPY |
| 2421 | ENUMDOC |
| 2422 | Copy symbol at runtime. |
| 2423 | ENUM |
| 2424 | BFD_RELOC_MN10300_GLOB_DAT |
| 2425 | ENUMDOC |
| 2426 | Create GOT entry. |
| 2427 | ENUM |
| 2428 | BFD_RELOC_MN10300_JMP_SLOT |
| 2429 | ENUMDOC |
| 2430 | Create PLT entry. |
| 2431 | ENUM |
| 2432 | BFD_RELOC_MN10300_RELATIVE |
| 2433 | ENUMDOC |
| 2434 | Adjust by program base. |
| 2435 | ENUM |
| 2436 | BFD_RELOC_MN10300_SYM_DIFF |
| 2437 | ENUMDOC |
| 2438 | Together with another reloc targeted at the same location, |
| 2439 | allows for a value that is the difference of two symbols |
| 2440 | in the same section. |
| 2441 | ENUM |
| 2442 | BFD_RELOC_MN10300_ALIGN |
| 2443 | ENUMDOC |
| 2444 | The addend of this reloc is an alignment power that must |
| 2445 | be honoured at the offset's location, regardless of linker |
| 2446 | relaxation. |
| 2447 | COMMENT |
| 2448 | |
| 2449 | ENUM |
| 2450 | BFD_RELOC_386_GOT32 |
| 2451 | ENUMX |
| 2452 | BFD_RELOC_386_PLT32 |
| 2453 | ENUMX |
| 2454 | BFD_RELOC_386_COPY |
| 2455 | ENUMX |
| 2456 | BFD_RELOC_386_GLOB_DAT |
| 2457 | ENUMX |
| 2458 | BFD_RELOC_386_JUMP_SLOT |
| 2459 | ENUMX |
| 2460 | BFD_RELOC_386_RELATIVE |
| 2461 | ENUMX |
| 2462 | BFD_RELOC_386_GOTOFF |
| 2463 | ENUMX |
| 2464 | BFD_RELOC_386_GOTPC |
| 2465 | ENUMX |
| 2466 | BFD_RELOC_386_TLS_TPOFF |
| 2467 | ENUMX |
| 2468 | BFD_RELOC_386_TLS_IE |
| 2469 | ENUMX |
| 2470 | BFD_RELOC_386_TLS_GOTIE |
| 2471 | ENUMX |
| 2472 | BFD_RELOC_386_TLS_LE |
| 2473 | ENUMX |
| 2474 | BFD_RELOC_386_TLS_GD |
| 2475 | ENUMX |
| 2476 | BFD_RELOC_386_TLS_LDM |
| 2477 | ENUMX |
| 2478 | BFD_RELOC_386_TLS_LDO_32 |
| 2479 | ENUMX |
| 2480 | BFD_RELOC_386_TLS_IE_32 |
| 2481 | ENUMX |
| 2482 | BFD_RELOC_386_TLS_LE_32 |
| 2483 | ENUMX |
| 2484 | BFD_RELOC_386_TLS_DTPMOD32 |
| 2485 | ENUMX |
| 2486 | BFD_RELOC_386_TLS_DTPOFF32 |
| 2487 | ENUMX |
| 2488 | BFD_RELOC_386_TLS_TPOFF32 |
| 2489 | ENUMX |
| 2490 | BFD_RELOC_386_TLS_GOTDESC |
| 2491 | ENUMX |
| 2492 | BFD_RELOC_386_TLS_DESC_CALL |
| 2493 | ENUMX |
| 2494 | BFD_RELOC_386_TLS_DESC |
| 2495 | ENUMDOC |
| 2496 | i386/elf relocations |
| 2497 | |
| 2498 | ENUM |
| 2499 | BFD_RELOC_X86_64_GOT32 |
| 2500 | ENUMX |
| 2501 | BFD_RELOC_X86_64_PLT32 |
| 2502 | ENUMX |
| 2503 | BFD_RELOC_X86_64_COPY |
| 2504 | ENUMX |
| 2505 | BFD_RELOC_X86_64_GLOB_DAT |
| 2506 | ENUMX |
| 2507 | BFD_RELOC_X86_64_JUMP_SLOT |
| 2508 | ENUMX |
| 2509 | BFD_RELOC_X86_64_RELATIVE |
| 2510 | ENUMX |
| 2511 | BFD_RELOC_X86_64_GOTPCREL |
| 2512 | ENUMX |
| 2513 | BFD_RELOC_X86_64_32S |
| 2514 | ENUMX |
| 2515 | BFD_RELOC_X86_64_DTPMOD64 |
| 2516 | ENUMX |
| 2517 | BFD_RELOC_X86_64_DTPOFF64 |
| 2518 | ENUMX |
| 2519 | BFD_RELOC_X86_64_TPOFF64 |
| 2520 | ENUMX |
| 2521 | BFD_RELOC_X86_64_TLSGD |
| 2522 | ENUMX |
| 2523 | BFD_RELOC_X86_64_TLSLD |
| 2524 | ENUMX |
| 2525 | BFD_RELOC_X86_64_DTPOFF32 |
| 2526 | ENUMX |
| 2527 | BFD_RELOC_X86_64_GOTTPOFF |
| 2528 | ENUMX |
| 2529 | BFD_RELOC_X86_64_TPOFF32 |
| 2530 | ENUMX |
| 2531 | BFD_RELOC_X86_64_GOTOFF64 |
| 2532 | ENUMX |
| 2533 | BFD_RELOC_X86_64_GOTPC32 |
| 2534 | ENUMX |
| 2535 | BFD_RELOC_X86_64_GOT64 |
| 2536 | ENUMX |
| 2537 | BFD_RELOC_X86_64_GOTPCREL64 |
| 2538 | ENUMX |
| 2539 | BFD_RELOC_X86_64_GOTPC64 |
| 2540 | ENUMX |
| 2541 | BFD_RELOC_X86_64_GOTPLT64 |
| 2542 | ENUMX |
| 2543 | BFD_RELOC_X86_64_PLTOFF64 |
| 2544 | ENUMX |
| 2545 | BFD_RELOC_X86_64_GOTPC32_TLSDESC |
| 2546 | ENUMX |
| 2547 | BFD_RELOC_X86_64_TLSDESC_CALL |
| 2548 | ENUMX |
| 2549 | BFD_RELOC_X86_64_TLSDESC |
| 2550 | ENUMDOC |
| 2551 | x86-64/elf relocations |
| 2552 | |
| 2553 | ENUM |
| 2554 | BFD_RELOC_NS32K_IMM_8 |
| 2555 | ENUMX |
| 2556 | BFD_RELOC_NS32K_IMM_16 |
| 2557 | ENUMX |
| 2558 | BFD_RELOC_NS32K_IMM_32 |
| 2559 | ENUMX |
| 2560 | BFD_RELOC_NS32K_IMM_8_PCREL |
| 2561 | ENUMX |
| 2562 | BFD_RELOC_NS32K_IMM_16_PCREL |
| 2563 | ENUMX |
| 2564 | BFD_RELOC_NS32K_IMM_32_PCREL |
| 2565 | ENUMX |
| 2566 | BFD_RELOC_NS32K_DISP_8 |
| 2567 | ENUMX |
| 2568 | BFD_RELOC_NS32K_DISP_16 |
| 2569 | ENUMX |
| 2570 | BFD_RELOC_NS32K_DISP_32 |
| 2571 | ENUMX |
| 2572 | BFD_RELOC_NS32K_DISP_8_PCREL |
| 2573 | ENUMX |
| 2574 | BFD_RELOC_NS32K_DISP_16_PCREL |
| 2575 | ENUMX |
| 2576 | BFD_RELOC_NS32K_DISP_32_PCREL |
| 2577 | ENUMDOC |
| 2578 | ns32k relocations |
| 2579 | |
| 2580 | ENUM |
| 2581 | BFD_RELOC_PDP11_DISP_8_PCREL |
| 2582 | ENUMX |
| 2583 | BFD_RELOC_PDP11_DISP_6_PCREL |
| 2584 | ENUMDOC |
| 2585 | PDP11 relocations |
| 2586 | |
| 2587 | ENUM |
| 2588 | BFD_RELOC_PJ_CODE_HI16 |
| 2589 | ENUMX |
| 2590 | BFD_RELOC_PJ_CODE_LO16 |
| 2591 | ENUMX |
| 2592 | BFD_RELOC_PJ_CODE_DIR16 |
| 2593 | ENUMX |
| 2594 | BFD_RELOC_PJ_CODE_DIR32 |
| 2595 | ENUMX |
| 2596 | BFD_RELOC_PJ_CODE_REL16 |
| 2597 | ENUMX |
| 2598 | BFD_RELOC_PJ_CODE_REL32 |
| 2599 | ENUMDOC |
| 2600 | Picojava relocs. Not all of these appear in object files. |
| 2601 | |
| 2602 | ENUM |
| 2603 | BFD_RELOC_PPC_B26 |
| 2604 | ENUMX |
| 2605 | BFD_RELOC_PPC_BA26 |
| 2606 | ENUMX |
| 2607 | BFD_RELOC_PPC_TOC16 |
| 2608 | ENUMX |
| 2609 | BFD_RELOC_PPC_B16 |
| 2610 | ENUMX |
| 2611 | BFD_RELOC_PPC_B16_BRTAKEN |
| 2612 | ENUMX |
| 2613 | BFD_RELOC_PPC_B16_BRNTAKEN |
| 2614 | ENUMX |
| 2615 | BFD_RELOC_PPC_BA16 |
| 2616 | ENUMX |
| 2617 | BFD_RELOC_PPC_BA16_BRTAKEN |
| 2618 | ENUMX |
| 2619 | BFD_RELOC_PPC_BA16_BRNTAKEN |
| 2620 | ENUMX |
| 2621 | BFD_RELOC_PPC_COPY |
| 2622 | ENUMX |
| 2623 | BFD_RELOC_PPC_GLOB_DAT |
| 2624 | ENUMX |
| 2625 | BFD_RELOC_PPC_JMP_SLOT |
| 2626 | ENUMX |
| 2627 | BFD_RELOC_PPC_RELATIVE |
| 2628 | ENUMX |
| 2629 | BFD_RELOC_PPC_LOCAL24PC |
| 2630 | ENUMX |
| 2631 | BFD_RELOC_PPC_EMB_NADDR32 |
| 2632 | ENUMX |
| 2633 | BFD_RELOC_PPC_EMB_NADDR16 |
| 2634 | ENUMX |
| 2635 | BFD_RELOC_PPC_EMB_NADDR16_LO |
| 2636 | ENUMX |
| 2637 | BFD_RELOC_PPC_EMB_NADDR16_HI |
| 2638 | ENUMX |
| 2639 | BFD_RELOC_PPC_EMB_NADDR16_HA |
| 2640 | ENUMX |
| 2641 | BFD_RELOC_PPC_EMB_SDAI16 |
| 2642 | ENUMX |
| 2643 | BFD_RELOC_PPC_EMB_SDA2I16 |
| 2644 | ENUMX |
| 2645 | BFD_RELOC_PPC_EMB_SDA2REL |
| 2646 | ENUMX |
| 2647 | BFD_RELOC_PPC_EMB_SDA21 |
| 2648 | ENUMX |
| 2649 | BFD_RELOC_PPC_EMB_MRKREF |
| 2650 | ENUMX |
| 2651 | BFD_RELOC_PPC_EMB_RELSEC16 |
| 2652 | ENUMX |
| 2653 | BFD_RELOC_PPC_EMB_RELST_LO |
| 2654 | ENUMX |
| 2655 | BFD_RELOC_PPC_EMB_RELST_HI |
| 2656 | ENUMX |
| 2657 | BFD_RELOC_PPC_EMB_RELST_HA |
| 2658 | ENUMX |
| 2659 | BFD_RELOC_PPC_EMB_BIT_FLD |
| 2660 | ENUMX |
| 2661 | BFD_RELOC_PPC_EMB_RELSDA |
| 2662 | ENUMX |
| 2663 | BFD_RELOC_PPC64_HIGHER |
| 2664 | ENUMX |
| 2665 | BFD_RELOC_PPC64_HIGHER_S |
| 2666 | ENUMX |
| 2667 | BFD_RELOC_PPC64_HIGHEST |
| 2668 | ENUMX |
| 2669 | BFD_RELOC_PPC64_HIGHEST_S |
| 2670 | ENUMX |
| 2671 | BFD_RELOC_PPC64_TOC16_LO |
| 2672 | ENUMX |
| 2673 | BFD_RELOC_PPC64_TOC16_HI |
| 2674 | ENUMX |
| 2675 | BFD_RELOC_PPC64_TOC16_HA |
| 2676 | ENUMX |
| 2677 | BFD_RELOC_PPC64_TOC |
| 2678 | ENUMX |
| 2679 | BFD_RELOC_PPC64_PLTGOT16 |
| 2680 | ENUMX |
| 2681 | BFD_RELOC_PPC64_PLTGOT16_LO |
| 2682 | ENUMX |
| 2683 | BFD_RELOC_PPC64_PLTGOT16_HI |
| 2684 | ENUMX |
| 2685 | BFD_RELOC_PPC64_PLTGOT16_HA |
| 2686 | ENUMX |
| 2687 | BFD_RELOC_PPC64_ADDR16_DS |
| 2688 | ENUMX |
| 2689 | BFD_RELOC_PPC64_ADDR16_LO_DS |
| 2690 | ENUMX |
| 2691 | BFD_RELOC_PPC64_GOT16_DS |
| 2692 | ENUMX |
| 2693 | BFD_RELOC_PPC64_GOT16_LO_DS |
| 2694 | ENUMX |
| 2695 | BFD_RELOC_PPC64_PLT16_LO_DS |
| 2696 | ENUMX |
| 2697 | BFD_RELOC_PPC64_SECTOFF_DS |
| 2698 | ENUMX |
| 2699 | BFD_RELOC_PPC64_SECTOFF_LO_DS |
| 2700 | ENUMX |
| 2701 | BFD_RELOC_PPC64_TOC16_DS |
| 2702 | ENUMX |
| 2703 | BFD_RELOC_PPC64_TOC16_LO_DS |
| 2704 | ENUMX |
| 2705 | BFD_RELOC_PPC64_PLTGOT16_DS |
| 2706 | ENUMX |
| 2707 | BFD_RELOC_PPC64_PLTGOT16_LO_DS |
| 2708 | ENUMDOC |
| 2709 | Power(rs6000) and PowerPC relocations. |
| 2710 | |
| 2711 | ENUM |
| 2712 | BFD_RELOC_PPC_TLS |
| 2713 | ENUMX |
| 2714 | BFD_RELOC_PPC_TLSGD |
| 2715 | ENUMX |
| 2716 | BFD_RELOC_PPC_TLSLD |
| 2717 | ENUMX |
| 2718 | BFD_RELOC_PPC_DTPMOD |
| 2719 | ENUMX |
| 2720 | BFD_RELOC_PPC_TPREL16 |
| 2721 | ENUMX |
| 2722 | BFD_RELOC_PPC_TPREL16_LO |
| 2723 | ENUMX |
| 2724 | BFD_RELOC_PPC_TPREL16_HI |
| 2725 | ENUMX |
| 2726 | BFD_RELOC_PPC_TPREL16_HA |
| 2727 | ENUMX |
| 2728 | BFD_RELOC_PPC_TPREL |
| 2729 | ENUMX |
| 2730 | BFD_RELOC_PPC_DTPREL16 |
| 2731 | ENUMX |
| 2732 | BFD_RELOC_PPC_DTPREL16_LO |
| 2733 | ENUMX |
| 2734 | BFD_RELOC_PPC_DTPREL16_HI |
| 2735 | ENUMX |
| 2736 | BFD_RELOC_PPC_DTPREL16_HA |
| 2737 | ENUMX |
| 2738 | BFD_RELOC_PPC_DTPREL |
| 2739 | ENUMX |
| 2740 | BFD_RELOC_PPC_GOT_TLSGD16 |
| 2741 | ENUMX |
| 2742 | BFD_RELOC_PPC_GOT_TLSGD16_LO |
| 2743 | ENUMX |
| 2744 | BFD_RELOC_PPC_GOT_TLSGD16_HI |
| 2745 | ENUMX |
| 2746 | BFD_RELOC_PPC_GOT_TLSGD16_HA |
| 2747 | ENUMX |
| 2748 | BFD_RELOC_PPC_GOT_TLSLD16 |
| 2749 | ENUMX |
| 2750 | BFD_RELOC_PPC_GOT_TLSLD16_LO |
| 2751 | ENUMX |
| 2752 | BFD_RELOC_PPC_GOT_TLSLD16_HI |
| 2753 | ENUMX |
| 2754 | BFD_RELOC_PPC_GOT_TLSLD16_HA |
| 2755 | ENUMX |
| 2756 | BFD_RELOC_PPC_GOT_TPREL16 |
| 2757 | ENUMX |
| 2758 | BFD_RELOC_PPC_GOT_TPREL16_LO |
| 2759 | ENUMX |
| 2760 | BFD_RELOC_PPC_GOT_TPREL16_HI |
| 2761 | ENUMX |
| 2762 | BFD_RELOC_PPC_GOT_TPREL16_HA |
| 2763 | ENUMX |
| 2764 | BFD_RELOC_PPC_GOT_DTPREL16 |
| 2765 | ENUMX |
| 2766 | BFD_RELOC_PPC_GOT_DTPREL16_LO |
| 2767 | ENUMX |
| 2768 | BFD_RELOC_PPC_GOT_DTPREL16_HI |
| 2769 | ENUMX |
| 2770 | BFD_RELOC_PPC_GOT_DTPREL16_HA |
| 2771 | ENUMX |
| 2772 | BFD_RELOC_PPC64_TPREL16_DS |
| 2773 | ENUMX |
| 2774 | BFD_RELOC_PPC64_TPREL16_LO_DS |
| 2775 | ENUMX |
| 2776 | BFD_RELOC_PPC64_TPREL16_HIGHER |
| 2777 | ENUMX |
| 2778 | BFD_RELOC_PPC64_TPREL16_HIGHERA |
| 2779 | ENUMX |
| 2780 | BFD_RELOC_PPC64_TPREL16_HIGHEST |
| 2781 | ENUMX |
| 2782 | BFD_RELOC_PPC64_TPREL16_HIGHESTA |
| 2783 | ENUMX |
| 2784 | BFD_RELOC_PPC64_DTPREL16_DS |
| 2785 | ENUMX |
| 2786 | BFD_RELOC_PPC64_DTPREL16_LO_DS |
| 2787 | ENUMX |
| 2788 | BFD_RELOC_PPC64_DTPREL16_HIGHER |
| 2789 | ENUMX |
| 2790 | BFD_RELOC_PPC64_DTPREL16_HIGHERA |
| 2791 | ENUMX |
| 2792 | BFD_RELOC_PPC64_DTPREL16_HIGHEST |
| 2793 | ENUMX |
| 2794 | BFD_RELOC_PPC64_DTPREL16_HIGHESTA |
| 2795 | ENUMDOC |
| 2796 | PowerPC and PowerPC64 thread-local storage relocations. |
| 2797 | |
| 2798 | ENUM |
| 2799 | BFD_RELOC_I370_D12 |
| 2800 | ENUMDOC |
| 2801 | IBM 370/390 relocations |
| 2802 | |
| 2803 | ENUM |
| 2804 | BFD_RELOC_CTOR |
| 2805 | ENUMDOC |
| 2806 | The type of reloc used to build a constructor table - at the moment |
| 2807 | probably a 32 bit wide absolute relocation, but the target can choose. |
| 2808 | It generally does map to one of the other relocation types. |
| 2809 | |
| 2810 | ENUM |
| 2811 | BFD_RELOC_ARM_PCREL_BRANCH |
| 2812 | ENUMDOC |
| 2813 | ARM 26 bit pc-relative branch. The lowest two bits must be zero and are |
| 2814 | not stored in the instruction. |
| 2815 | ENUM |
| 2816 | BFD_RELOC_ARM_PCREL_BLX |
| 2817 | ENUMDOC |
| 2818 | ARM 26 bit pc-relative branch. The lowest bit must be zero and is |
| 2819 | not stored in the instruction. The 2nd lowest bit comes from a 1 bit |
| 2820 | field in the instruction. |
| 2821 | ENUM |
| 2822 | BFD_RELOC_THUMB_PCREL_BLX |
| 2823 | ENUMDOC |
| 2824 | Thumb 22 bit pc-relative branch. The lowest bit must be zero and is |
| 2825 | not stored in the instruction. The 2nd lowest bit comes from a 1 bit |
| 2826 | field in the instruction. |
| 2827 | ENUM |
| 2828 | BFD_RELOC_ARM_PCREL_CALL |
| 2829 | ENUMDOC |
| 2830 | ARM 26-bit pc-relative branch for an unconditional BL or BLX instruction. |
| 2831 | ENUM |
| 2832 | BFD_RELOC_ARM_PCREL_JUMP |
| 2833 | ENUMDOC |
| 2834 | ARM 26-bit pc-relative branch for B or conditional BL instruction. |
| 2835 | |
| 2836 | ENUM |
| 2837 | BFD_RELOC_THUMB_PCREL_BRANCH7 |
| 2838 | ENUMX |
| 2839 | BFD_RELOC_THUMB_PCREL_BRANCH9 |
| 2840 | ENUMX |
| 2841 | BFD_RELOC_THUMB_PCREL_BRANCH12 |
| 2842 | ENUMX |
| 2843 | BFD_RELOC_THUMB_PCREL_BRANCH20 |
| 2844 | ENUMX |
| 2845 | BFD_RELOC_THUMB_PCREL_BRANCH23 |
| 2846 | ENUMX |
| 2847 | BFD_RELOC_THUMB_PCREL_BRANCH25 |
| 2848 | ENUMDOC |
| 2849 | Thumb 7-, 9-, 12-, 20-, 23-, and 25-bit pc-relative branches. |
| 2850 | The lowest bit must be zero and is not stored in the instruction. |
| 2851 | Note that the corresponding ELF R_ARM_THM_JUMPnn constant has an |
| 2852 | "nn" one smaller in all cases. Note further that BRANCH23 |
| 2853 | corresponds to R_ARM_THM_CALL. |
| 2854 | |
| 2855 | ENUM |
| 2856 | BFD_RELOC_ARM_OFFSET_IMM |
| 2857 | ENUMDOC |
| 2858 | 12-bit immediate offset, used in ARM-format ldr and str instructions. |
| 2859 | |
| 2860 | ENUM |
| 2861 | BFD_RELOC_ARM_THUMB_OFFSET |
| 2862 | ENUMDOC |
| 2863 | 5-bit immediate offset, used in Thumb-format ldr and str instructions. |
| 2864 | |
| 2865 | ENUM |
| 2866 | BFD_RELOC_ARM_TARGET1 |
| 2867 | ENUMDOC |
| 2868 | Pc-relative or absolute relocation depending on target. Used for |
| 2869 | entries in .init_array sections. |
| 2870 | ENUM |
| 2871 | BFD_RELOC_ARM_ROSEGREL32 |
| 2872 | ENUMDOC |
| 2873 | Read-only segment base relative address. |
| 2874 | ENUM |
| 2875 | BFD_RELOC_ARM_SBREL32 |
| 2876 | ENUMDOC |
| 2877 | Data segment base relative address. |
| 2878 | ENUM |
| 2879 | BFD_RELOC_ARM_TARGET2 |
| 2880 | ENUMDOC |
| 2881 | This reloc is used for references to RTTI data from exception handling |
| 2882 | tables. The actual definition depends on the target. It may be a |
| 2883 | pc-relative or some form of GOT-indirect relocation. |
| 2884 | ENUM |
| 2885 | BFD_RELOC_ARM_PREL31 |
| 2886 | ENUMDOC |
| 2887 | 31-bit PC relative address. |
| 2888 | ENUM |
| 2889 | BFD_RELOC_ARM_MOVW |
| 2890 | ENUMX |
| 2891 | BFD_RELOC_ARM_MOVT |
| 2892 | ENUMX |
| 2893 | BFD_RELOC_ARM_MOVW_PCREL |
| 2894 | ENUMX |
| 2895 | BFD_RELOC_ARM_MOVT_PCREL |
| 2896 | ENUMX |
| 2897 | BFD_RELOC_ARM_THUMB_MOVW |
| 2898 | ENUMX |
| 2899 | BFD_RELOC_ARM_THUMB_MOVT |
| 2900 | ENUMX |
| 2901 | BFD_RELOC_ARM_THUMB_MOVW_PCREL |
| 2902 | ENUMX |
| 2903 | BFD_RELOC_ARM_THUMB_MOVT_PCREL |
| 2904 | ENUMDOC |
| 2905 | Low and High halfword relocations for MOVW and MOVT instructions. |
| 2906 | |
| 2907 | ENUM |
| 2908 | BFD_RELOC_ARM_JUMP_SLOT |
| 2909 | ENUMX |
| 2910 | BFD_RELOC_ARM_GLOB_DAT |
| 2911 | ENUMX |
| 2912 | BFD_RELOC_ARM_GOT32 |
| 2913 | ENUMX |
| 2914 | BFD_RELOC_ARM_PLT32 |
| 2915 | ENUMX |
| 2916 | BFD_RELOC_ARM_RELATIVE |
| 2917 | ENUMX |
| 2918 | BFD_RELOC_ARM_GOTOFF |
| 2919 | ENUMX |
| 2920 | BFD_RELOC_ARM_GOTPC |
| 2921 | ENUMDOC |
| 2922 | Relocations for setting up GOTs and PLTs for shared libraries. |
| 2923 | |
| 2924 | ENUM |
| 2925 | BFD_RELOC_ARM_TLS_GD32 |
| 2926 | ENUMX |
| 2927 | BFD_RELOC_ARM_TLS_LDO32 |
| 2928 | ENUMX |
| 2929 | BFD_RELOC_ARM_TLS_LDM32 |
| 2930 | ENUMX |
| 2931 | BFD_RELOC_ARM_TLS_DTPOFF32 |
| 2932 | ENUMX |
| 2933 | BFD_RELOC_ARM_TLS_DTPMOD32 |
| 2934 | ENUMX |
| 2935 | BFD_RELOC_ARM_TLS_TPOFF32 |
| 2936 | ENUMX |
| 2937 | BFD_RELOC_ARM_TLS_IE32 |
| 2938 | ENUMX |
| 2939 | BFD_RELOC_ARM_TLS_LE32 |
| 2940 | ENUMDOC |
| 2941 | ARM thread-local storage relocations. |
| 2942 | |
| 2943 | ENUM |
| 2944 | BFD_RELOC_ARM_ALU_PC_G0_NC |
| 2945 | ENUMX |
| 2946 | BFD_RELOC_ARM_ALU_PC_G0 |
| 2947 | ENUMX |
| 2948 | BFD_RELOC_ARM_ALU_PC_G1_NC |
| 2949 | ENUMX |
| 2950 | BFD_RELOC_ARM_ALU_PC_G1 |
| 2951 | ENUMX |
| 2952 | BFD_RELOC_ARM_ALU_PC_G2 |
| 2953 | ENUMX |
| 2954 | BFD_RELOC_ARM_LDR_PC_G0 |
| 2955 | ENUMX |
| 2956 | BFD_RELOC_ARM_LDR_PC_G1 |
| 2957 | ENUMX |
| 2958 | BFD_RELOC_ARM_LDR_PC_G2 |
| 2959 | ENUMX |
| 2960 | BFD_RELOC_ARM_LDRS_PC_G0 |
| 2961 | ENUMX |
| 2962 | BFD_RELOC_ARM_LDRS_PC_G1 |
| 2963 | ENUMX |
| 2964 | BFD_RELOC_ARM_LDRS_PC_G2 |
| 2965 | ENUMX |
| 2966 | BFD_RELOC_ARM_LDC_PC_G0 |
| 2967 | ENUMX |
| 2968 | BFD_RELOC_ARM_LDC_PC_G1 |
| 2969 | ENUMX |
| 2970 | BFD_RELOC_ARM_LDC_PC_G2 |
| 2971 | ENUMX |
| 2972 | BFD_RELOC_ARM_ALU_SB_G0_NC |
| 2973 | ENUMX |
| 2974 | BFD_RELOC_ARM_ALU_SB_G0 |
| 2975 | ENUMX |
| 2976 | BFD_RELOC_ARM_ALU_SB_G1_NC |
| 2977 | ENUMX |
| 2978 | BFD_RELOC_ARM_ALU_SB_G1 |
| 2979 | ENUMX |
| 2980 | BFD_RELOC_ARM_ALU_SB_G2 |
| 2981 | ENUMX |
| 2982 | BFD_RELOC_ARM_LDR_SB_G0 |
| 2983 | ENUMX |
| 2984 | BFD_RELOC_ARM_LDR_SB_G1 |
| 2985 | ENUMX |
| 2986 | BFD_RELOC_ARM_LDR_SB_G2 |
| 2987 | ENUMX |
| 2988 | BFD_RELOC_ARM_LDRS_SB_G0 |
| 2989 | ENUMX |
| 2990 | BFD_RELOC_ARM_LDRS_SB_G1 |
| 2991 | ENUMX |
| 2992 | BFD_RELOC_ARM_LDRS_SB_G2 |
| 2993 | ENUMX |
| 2994 | BFD_RELOC_ARM_LDC_SB_G0 |
| 2995 | ENUMX |
| 2996 | BFD_RELOC_ARM_LDC_SB_G1 |
| 2997 | ENUMX |
| 2998 | BFD_RELOC_ARM_LDC_SB_G2 |
| 2999 | ENUMDOC |
| 3000 | ARM group relocations. |
| 3001 | |
| 3002 | ENUM |
| 3003 | BFD_RELOC_ARM_V4BX |
| 3004 | ENUMDOC |
| 3005 | Annotation of BX instructions. |
| 3006 | |
| 3007 | ENUM |
| 3008 | BFD_RELOC_ARM_IMMEDIATE |
| 3009 | ENUMX |
| 3010 | BFD_RELOC_ARM_ADRL_IMMEDIATE |
| 3011 | ENUMX |
| 3012 | BFD_RELOC_ARM_T32_IMMEDIATE |
| 3013 | ENUMX |
| 3014 | BFD_RELOC_ARM_T32_ADD_IMM |
| 3015 | ENUMX |
| 3016 | BFD_RELOC_ARM_T32_IMM12 |
| 3017 | ENUMX |
| 3018 | BFD_RELOC_ARM_T32_ADD_PC12 |
| 3019 | ENUMX |
| 3020 | BFD_RELOC_ARM_SHIFT_IMM |
| 3021 | ENUMX |
| 3022 | BFD_RELOC_ARM_SMC |
| 3023 | ENUMX |
| 3024 | BFD_RELOC_ARM_SWI |
| 3025 | ENUMX |
| 3026 | BFD_RELOC_ARM_MULTI |
| 3027 | ENUMX |
| 3028 | BFD_RELOC_ARM_CP_OFF_IMM |
| 3029 | ENUMX |
| 3030 | BFD_RELOC_ARM_CP_OFF_IMM_S2 |
| 3031 | ENUMX |
| 3032 | BFD_RELOC_ARM_T32_CP_OFF_IMM |
| 3033 | ENUMX |
| 3034 | BFD_RELOC_ARM_T32_CP_OFF_IMM_S2 |
| 3035 | ENUMX |
| 3036 | BFD_RELOC_ARM_ADR_IMM |
| 3037 | ENUMX |
| 3038 | BFD_RELOC_ARM_LDR_IMM |
| 3039 | ENUMX |
| 3040 | BFD_RELOC_ARM_LITERAL |
| 3041 | ENUMX |
| 3042 | BFD_RELOC_ARM_IN_POOL |
| 3043 | ENUMX |
| 3044 | BFD_RELOC_ARM_OFFSET_IMM8 |
| 3045 | ENUMX |
| 3046 | BFD_RELOC_ARM_T32_OFFSET_U8 |
| 3047 | ENUMX |
| 3048 | BFD_RELOC_ARM_T32_OFFSET_IMM |
| 3049 | ENUMX |
| 3050 | BFD_RELOC_ARM_HWLITERAL |
| 3051 | ENUMX |
| 3052 | BFD_RELOC_ARM_THUMB_ADD |
| 3053 | ENUMX |
| 3054 | BFD_RELOC_ARM_THUMB_IMM |
| 3055 | ENUMX |
| 3056 | BFD_RELOC_ARM_THUMB_SHIFT |
| 3057 | ENUMDOC |
| 3058 | These relocs are only used within the ARM assembler. They are not |
| 3059 | (at present) written to any object files. |
| 3060 | |
| 3061 | ENUM |
| 3062 | BFD_RELOC_SH_PCDISP8BY2 |
| 3063 | ENUMX |
| 3064 | BFD_RELOC_SH_PCDISP12BY2 |
| 3065 | ENUMX |
| 3066 | BFD_RELOC_SH_IMM3 |
| 3067 | ENUMX |
| 3068 | BFD_RELOC_SH_IMM3U |
| 3069 | ENUMX |
| 3070 | BFD_RELOC_SH_DISP12 |
| 3071 | ENUMX |
| 3072 | BFD_RELOC_SH_DISP12BY2 |
| 3073 | ENUMX |
| 3074 | BFD_RELOC_SH_DISP12BY4 |
| 3075 | ENUMX |
| 3076 | BFD_RELOC_SH_DISP12BY8 |
| 3077 | ENUMX |
| 3078 | BFD_RELOC_SH_DISP20 |
| 3079 | ENUMX |
| 3080 | BFD_RELOC_SH_DISP20BY8 |
| 3081 | ENUMX |
| 3082 | BFD_RELOC_SH_IMM4 |
| 3083 | ENUMX |
| 3084 | BFD_RELOC_SH_IMM4BY2 |
| 3085 | ENUMX |
| 3086 | BFD_RELOC_SH_IMM4BY4 |
| 3087 | ENUMX |
| 3088 | BFD_RELOC_SH_IMM8 |
| 3089 | ENUMX |
| 3090 | BFD_RELOC_SH_IMM8BY2 |
| 3091 | ENUMX |
| 3092 | BFD_RELOC_SH_IMM8BY4 |
| 3093 | ENUMX |
| 3094 | BFD_RELOC_SH_PCRELIMM8BY2 |
| 3095 | ENUMX |
| 3096 | BFD_RELOC_SH_PCRELIMM8BY4 |
| 3097 | ENUMX |
| 3098 | BFD_RELOC_SH_SWITCH16 |
| 3099 | ENUMX |
| 3100 | BFD_RELOC_SH_SWITCH32 |
| 3101 | ENUMX |
| 3102 | BFD_RELOC_SH_USES |
| 3103 | ENUMX |
| 3104 | BFD_RELOC_SH_COUNT |
| 3105 | ENUMX |
| 3106 | BFD_RELOC_SH_ALIGN |
| 3107 | ENUMX |
| 3108 | BFD_RELOC_SH_CODE |
| 3109 | ENUMX |
| 3110 | BFD_RELOC_SH_DATA |
| 3111 | ENUMX |
| 3112 | BFD_RELOC_SH_LABEL |
| 3113 | ENUMX |
| 3114 | BFD_RELOC_SH_LOOP_START |
| 3115 | ENUMX |
| 3116 | BFD_RELOC_SH_LOOP_END |
| 3117 | ENUMX |
| 3118 | BFD_RELOC_SH_COPY |
| 3119 | ENUMX |
| 3120 | BFD_RELOC_SH_GLOB_DAT |
| 3121 | ENUMX |
| 3122 | BFD_RELOC_SH_JMP_SLOT |
| 3123 | ENUMX |
| 3124 | BFD_RELOC_SH_RELATIVE |
| 3125 | ENUMX |
| 3126 | BFD_RELOC_SH_GOTPC |
| 3127 | ENUMX |
| 3128 | BFD_RELOC_SH_GOT_LOW16 |
| 3129 | ENUMX |
| 3130 | BFD_RELOC_SH_GOT_MEDLOW16 |
| 3131 | ENUMX |
| 3132 | BFD_RELOC_SH_GOT_MEDHI16 |
| 3133 | ENUMX |
| 3134 | BFD_RELOC_SH_GOT_HI16 |
| 3135 | ENUMX |
| 3136 | BFD_RELOC_SH_GOTPLT_LOW16 |
| 3137 | ENUMX |
| 3138 | BFD_RELOC_SH_GOTPLT_MEDLOW16 |
| 3139 | ENUMX |
| 3140 | BFD_RELOC_SH_GOTPLT_MEDHI16 |
| 3141 | ENUMX |
| 3142 | BFD_RELOC_SH_GOTPLT_HI16 |
| 3143 | ENUMX |
| 3144 | BFD_RELOC_SH_PLT_LOW16 |
| 3145 | ENUMX |
| 3146 | BFD_RELOC_SH_PLT_MEDLOW16 |
| 3147 | ENUMX |
| 3148 | BFD_RELOC_SH_PLT_MEDHI16 |
| 3149 | ENUMX |
| 3150 | BFD_RELOC_SH_PLT_HI16 |
| 3151 | ENUMX |
| 3152 | BFD_RELOC_SH_GOTOFF_LOW16 |
| 3153 | ENUMX |
| 3154 | BFD_RELOC_SH_GOTOFF_MEDLOW16 |
| 3155 | ENUMX |
| 3156 | BFD_RELOC_SH_GOTOFF_MEDHI16 |
| 3157 | ENUMX |
| 3158 | BFD_RELOC_SH_GOTOFF_HI16 |
| 3159 | ENUMX |
| 3160 | BFD_RELOC_SH_GOTPC_LOW16 |
| 3161 | ENUMX |
| 3162 | BFD_RELOC_SH_GOTPC_MEDLOW16 |
| 3163 | ENUMX |
| 3164 | BFD_RELOC_SH_GOTPC_MEDHI16 |
| 3165 | ENUMX |
| 3166 | BFD_RELOC_SH_GOTPC_HI16 |
| 3167 | ENUMX |
| 3168 | BFD_RELOC_SH_COPY64 |
| 3169 | ENUMX |
| 3170 | BFD_RELOC_SH_GLOB_DAT64 |
| 3171 | ENUMX |
| 3172 | BFD_RELOC_SH_JMP_SLOT64 |
| 3173 | ENUMX |
| 3174 | BFD_RELOC_SH_RELATIVE64 |
| 3175 | ENUMX |
| 3176 | BFD_RELOC_SH_GOT10BY4 |
| 3177 | ENUMX |
| 3178 | BFD_RELOC_SH_GOT10BY8 |
| 3179 | ENUMX |
| 3180 | BFD_RELOC_SH_GOTPLT10BY4 |
| 3181 | ENUMX |
| 3182 | BFD_RELOC_SH_GOTPLT10BY8 |
| 3183 | ENUMX |
| 3184 | BFD_RELOC_SH_GOTPLT32 |
| 3185 | ENUMX |
| 3186 | BFD_RELOC_SH_SHMEDIA_CODE |
| 3187 | ENUMX |
| 3188 | BFD_RELOC_SH_IMMU5 |
| 3189 | ENUMX |
| 3190 | BFD_RELOC_SH_IMMS6 |
| 3191 | ENUMX |
| 3192 | BFD_RELOC_SH_IMMS6BY32 |
| 3193 | ENUMX |
| 3194 | BFD_RELOC_SH_IMMU6 |
| 3195 | ENUMX |
| 3196 | BFD_RELOC_SH_IMMS10 |
| 3197 | ENUMX |
| 3198 | BFD_RELOC_SH_IMMS10BY2 |
| 3199 | ENUMX |
| 3200 | BFD_RELOC_SH_IMMS10BY4 |
| 3201 | ENUMX |
| 3202 | BFD_RELOC_SH_IMMS10BY8 |
| 3203 | ENUMX |
| 3204 | BFD_RELOC_SH_IMMS16 |
| 3205 | ENUMX |
| 3206 | BFD_RELOC_SH_IMMU16 |
| 3207 | ENUMX |
| 3208 | BFD_RELOC_SH_IMM_LOW16 |
| 3209 | ENUMX |
| 3210 | BFD_RELOC_SH_IMM_LOW16_PCREL |
| 3211 | ENUMX |
| 3212 | BFD_RELOC_SH_IMM_MEDLOW16 |
| 3213 | ENUMX |
| 3214 | BFD_RELOC_SH_IMM_MEDLOW16_PCREL |
| 3215 | ENUMX |
| 3216 | BFD_RELOC_SH_IMM_MEDHI16 |
| 3217 | ENUMX |
| 3218 | BFD_RELOC_SH_IMM_MEDHI16_PCREL |
| 3219 | ENUMX |
| 3220 | BFD_RELOC_SH_IMM_HI16 |
| 3221 | ENUMX |
| 3222 | BFD_RELOC_SH_IMM_HI16_PCREL |
| 3223 | ENUMX |
| 3224 | BFD_RELOC_SH_PT_16 |
| 3225 | ENUMX |
| 3226 | BFD_RELOC_SH_TLS_GD_32 |
| 3227 | ENUMX |
| 3228 | BFD_RELOC_SH_TLS_LD_32 |
| 3229 | ENUMX |
| 3230 | BFD_RELOC_SH_TLS_LDO_32 |
| 3231 | ENUMX |
| 3232 | BFD_RELOC_SH_TLS_IE_32 |
| 3233 | ENUMX |
| 3234 | BFD_RELOC_SH_TLS_LE_32 |
| 3235 | ENUMX |
| 3236 | BFD_RELOC_SH_TLS_DTPMOD32 |
| 3237 | ENUMX |
| 3238 | BFD_RELOC_SH_TLS_DTPOFF32 |
| 3239 | ENUMX |
| 3240 | BFD_RELOC_SH_TLS_TPOFF32 |
| 3241 | ENUMDOC |
| 3242 | Renesas / SuperH SH relocs. Not all of these appear in object files. |
| 3243 | |
| 3244 | ENUM |
| 3245 | BFD_RELOC_ARC_B22_PCREL |
| 3246 | ENUMDOC |
| 3247 | ARC Cores relocs. |
| 3248 | ARC 22 bit pc-relative branch. The lowest two bits must be zero and are |
| 3249 | not stored in the instruction. The high 20 bits are installed in bits 26 |
| 3250 | through 7 of the instruction. |
| 3251 | ENUM |
| 3252 | BFD_RELOC_ARC_B26 |
| 3253 | ENUMDOC |
| 3254 | ARC 26 bit absolute branch. The lowest two bits must be zero and are not |
| 3255 | stored in the instruction. The high 24 bits are installed in bits 23 |
| 3256 | through 0. |
| 3257 | |
| 3258 | ENUM |
| 3259 | BFD_RELOC_BFIN_16_IMM |
| 3260 | ENUMDOC |
| 3261 | ADI Blackfin 16 bit immediate absolute reloc. |
| 3262 | ENUM |
| 3263 | BFD_RELOC_BFIN_16_HIGH |
| 3264 | ENUMDOC |
| 3265 | ADI Blackfin 16 bit immediate absolute reloc higher 16 bits. |
| 3266 | ENUM |
| 3267 | BFD_RELOC_BFIN_4_PCREL |
| 3268 | ENUMDOC |
| 3269 | ADI Blackfin 'a' part of LSETUP. |
| 3270 | ENUM |
| 3271 | BFD_RELOC_BFIN_5_PCREL |
| 3272 | ENUMDOC |
| 3273 | ADI Blackfin. |
| 3274 | ENUM |
| 3275 | BFD_RELOC_BFIN_16_LOW |
| 3276 | ENUMDOC |
| 3277 | ADI Blackfin 16 bit immediate absolute reloc lower 16 bits. |
| 3278 | ENUM |
| 3279 | BFD_RELOC_BFIN_10_PCREL |
| 3280 | ENUMDOC |
| 3281 | ADI Blackfin. |
| 3282 | ENUM |
| 3283 | BFD_RELOC_BFIN_11_PCREL |
| 3284 | ENUMDOC |
| 3285 | ADI Blackfin 'b' part of LSETUP. |
| 3286 | ENUM |
| 3287 | BFD_RELOC_BFIN_12_PCREL_JUMP |
| 3288 | ENUMDOC |
| 3289 | ADI Blackfin. |
| 3290 | ENUM |
| 3291 | BFD_RELOC_BFIN_12_PCREL_JUMP_S |
| 3292 | ENUMDOC |
| 3293 | ADI Blackfin Short jump, pcrel. |
| 3294 | ENUM |
| 3295 | BFD_RELOC_BFIN_24_PCREL_CALL_X |
| 3296 | ENUMDOC |
| 3297 | ADI Blackfin Call.x not implemented. |
| 3298 | ENUM |
| 3299 | BFD_RELOC_BFIN_24_PCREL_JUMP_L |
| 3300 | ENUMDOC |
| 3301 | ADI Blackfin Long Jump pcrel. |
| 3302 | ENUM |
| 3303 | BFD_RELOC_BFIN_GOT17M4 |
| 3304 | ENUMX |
| 3305 | BFD_RELOC_BFIN_GOTHI |
| 3306 | ENUMX |
| 3307 | BFD_RELOC_BFIN_GOTLO |
| 3308 | ENUMX |
| 3309 | BFD_RELOC_BFIN_FUNCDESC |
| 3310 | ENUMX |
| 3311 | BFD_RELOC_BFIN_FUNCDESC_GOT17M4 |
| 3312 | ENUMX |
| 3313 | BFD_RELOC_BFIN_FUNCDESC_GOTHI |
| 3314 | ENUMX |
| 3315 | BFD_RELOC_BFIN_FUNCDESC_GOTLO |
| 3316 | ENUMX |
| 3317 | BFD_RELOC_BFIN_FUNCDESC_VALUE |
| 3318 | ENUMX |
| 3319 | BFD_RELOC_BFIN_FUNCDESC_GOTOFF17M4 |
| 3320 | ENUMX |
| 3321 | BFD_RELOC_BFIN_FUNCDESC_GOTOFFHI |
| 3322 | ENUMX |
| 3323 | BFD_RELOC_BFIN_FUNCDESC_GOTOFFLO |
| 3324 | ENUMX |
| 3325 | BFD_RELOC_BFIN_GOTOFF17M4 |
| 3326 | ENUMX |
| 3327 | BFD_RELOC_BFIN_GOTOFFHI |
| 3328 | ENUMX |
| 3329 | BFD_RELOC_BFIN_GOTOFFLO |
| 3330 | ENUMDOC |
| 3331 | ADI Blackfin FD-PIC relocations. |
| 3332 | ENUM |
| 3333 | BFD_RELOC_BFIN_GOT |
| 3334 | ENUMDOC |
| 3335 | ADI Blackfin GOT relocation. |
| 3336 | ENUM |
| 3337 | BFD_RELOC_BFIN_PLTPC |
| 3338 | ENUMDOC |
| 3339 | ADI Blackfin PLTPC relocation. |
| 3340 | ENUM |
| 3341 | BFD_ARELOC_BFIN_PUSH |
| 3342 | ENUMDOC |
| 3343 | ADI Blackfin arithmetic relocation. |
| 3344 | ENUM |
| 3345 | BFD_ARELOC_BFIN_CONST |
| 3346 | ENUMDOC |
| 3347 | ADI Blackfin arithmetic relocation. |
| 3348 | ENUM |
| 3349 | BFD_ARELOC_BFIN_ADD |
| 3350 | ENUMDOC |
| 3351 | ADI Blackfin arithmetic relocation. |
| 3352 | ENUM |
| 3353 | BFD_ARELOC_BFIN_SUB |
| 3354 | ENUMDOC |
| 3355 | ADI Blackfin arithmetic relocation. |
| 3356 | ENUM |
| 3357 | BFD_ARELOC_BFIN_MULT |
| 3358 | ENUMDOC |
| 3359 | ADI Blackfin arithmetic relocation. |
| 3360 | ENUM |
| 3361 | BFD_ARELOC_BFIN_DIV |
| 3362 | ENUMDOC |
| 3363 | ADI Blackfin arithmetic relocation. |
| 3364 | ENUM |
| 3365 | BFD_ARELOC_BFIN_MOD |
| 3366 | ENUMDOC |
| 3367 | ADI Blackfin arithmetic relocation. |
| 3368 | ENUM |
| 3369 | BFD_ARELOC_BFIN_LSHIFT |
| 3370 | ENUMDOC |
| 3371 | ADI Blackfin arithmetic relocation. |
| 3372 | ENUM |
| 3373 | BFD_ARELOC_BFIN_RSHIFT |
| 3374 | ENUMDOC |
| 3375 | ADI Blackfin arithmetic relocation. |
| 3376 | ENUM |
| 3377 | BFD_ARELOC_BFIN_AND |
| 3378 | ENUMDOC |
| 3379 | ADI Blackfin arithmetic relocation. |
| 3380 | ENUM |
| 3381 | BFD_ARELOC_BFIN_OR |
| 3382 | ENUMDOC |
| 3383 | ADI Blackfin arithmetic relocation. |
| 3384 | ENUM |
| 3385 | BFD_ARELOC_BFIN_XOR |
| 3386 | ENUMDOC |
| 3387 | ADI Blackfin arithmetic relocation. |
| 3388 | ENUM |
| 3389 | BFD_ARELOC_BFIN_LAND |
| 3390 | ENUMDOC |
| 3391 | ADI Blackfin arithmetic relocation. |
| 3392 | ENUM |
| 3393 | BFD_ARELOC_BFIN_LOR |
| 3394 | ENUMDOC |
| 3395 | ADI Blackfin arithmetic relocation. |
| 3396 | ENUM |
| 3397 | BFD_ARELOC_BFIN_LEN |
| 3398 | ENUMDOC |
| 3399 | ADI Blackfin arithmetic relocation. |
| 3400 | ENUM |
| 3401 | BFD_ARELOC_BFIN_NEG |
| 3402 | ENUMDOC |
| 3403 | ADI Blackfin arithmetic relocation. |
| 3404 | ENUM |
| 3405 | BFD_ARELOC_BFIN_COMP |
| 3406 | ENUMDOC |
| 3407 | ADI Blackfin arithmetic relocation. |
| 3408 | ENUM |
| 3409 | BFD_ARELOC_BFIN_PAGE |
| 3410 | ENUMDOC |
| 3411 | ADI Blackfin arithmetic relocation. |
| 3412 | ENUM |
| 3413 | BFD_ARELOC_BFIN_HWPAGE |
| 3414 | ENUMDOC |
| 3415 | ADI Blackfin arithmetic relocation. |
| 3416 | ENUM |
| 3417 | BFD_ARELOC_BFIN_ADDR |
| 3418 | ENUMDOC |
| 3419 | ADI Blackfin arithmetic relocation. |
| 3420 | |
| 3421 | ENUM |
| 3422 | BFD_RELOC_D10V_10_PCREL_R |
| 3423 | ENUMDOC |
| 3424 | Mitsubishi D10V relocs. |
| 3425 | This is a 10-bit reloc with the right 2 bits |
| 3426 | assumed to be 0. |
| 3427 | ENUM |
| 3428 | BFD_RELOC_D10V_10_PCREL_L |
| 3429 | ENUMDOC |
| 3430 | Mitsubishi D10V relocs. |
| 3431 | This is a 10-bit reloc with the right 2 bits |
| 3432 | assumed to be 0. This is the same as the previous reloc |
| 3433 | except it is in the left container, i.e., |
| 3434 | shifted left 15 bits. |
| 3435 | ENUM |
| 3436 | BFD_RELOC_D10V_18 |
| 3437 | ENUMDOC |
| 3438 | This is an 18-bit reloc with the right 2 bits |
| 3439 | assumed to be 0. |
| 3440 | ENUM |
| 3441 | BFD_RELOC_D10V_18_PCREL |
| 3442 | ENUMDOC |
| 3443 | This is an 18-bit reloc with the right 2 bits |
| 3444 | assumed to be 0. |
| 3445 | |
| 3446 | ENUM |
| 3447 | BFD_RELOC_D30V_6 |
| 3448 | ENUMDOC |
| 3449 | Mitsubishi D30V relocs. |
| 3450 | This is a 6-bit absolute reloc. |
| 3451 | ENUM |
| 3452 | BFD_RELOC_D30V_9_PCREL |
| 3453 | ENUMDOC |
| 3454 | This is a 6-bit pc-relative reloc with |
| 3455 | the right 3 bits assumed to be 0. |
| 3456 | ENUM |
| 3457 | BFD_RELOC_D30V_9_PCREL_R |
| 3458 | ENUMDOC |
| 3459 | This is a 6-bit pc-relative reloc with |
| 3460 | the right 3 bits assumed to be 0. Same |
| 3461 | as the previous reloc but on the right side |
| 3462 | of the container. |
| 3463 | ENUM |
| 3464 | BFD_RELOC_D30V_15 |
| 3465 | ENUMDOC |
| 3466 | This is a 12-bit absolute reloc with the |
| 3467 | right 3 bitsassumed to be 0. |
| 3468 | ENUM |
| 3469 | BFD_RELOC_D30V_15_PCREL |
| 3470 | ENUMDOC |
| 3471 | This is a 12-bit pc-relative reloc with |
| 3472 | the right 3 bits assumed to be 0. |
| 3473 | ENUM |
| 3474 | BFD_RELOC_D30V_15_PCREL_R |
| 3475 | ENUMDOC |
| 3476 | This is a 12-bit pc-relative reloc with |
| 3477 | the right 3 bits assumed to be 0. Same |
| 3478 | as the previous reloc but on the right side |
| 3479 | of the container. |
| 3480 | ENUM |
| 3481 | BFD_RELOC_D30V_21 |
| 3482 | ENUMDOC |
| 3483 | This is an 18-bit absolute reloc with |
| 3484 | the right 3 bits assumed to be 0. |
| 3485 | ENUM |
| 3486 | BFD_RELOC_D30V_21_PCREL |
| 3487 | ENUMDOC |
| 3488 | This is an 18-bit pc-relative reloc with |
| 3489 | the right 3 bits assumed to be 0. |
| 3490 | ENUM |
| 3491 | BFD_RELOC_D30V_21_PCREL_R |
| 3492 | ENUMDOC |
| 3493 | This is an 18-bit pc-relative reloc with |
| 3494 | the right 3 bits assumed to be 0. Same |
| 3495 | as the previous reloc but on the right side |
| 3496 | of the container. |
| 3497 | ENUM |
| 3498 | BFD_RELOC_D30V_32 |
| 3499 | ENUMDOC |
| 3500 | This is a 32-bit absolute reloc. |
| 3501 | ENUM |
| 3502 | BFD_RELOC_D30V_32_PCREL |
| 3503 | ENUMDOC |
| 3504 | This is a 32-bit pc-relative reloc. |
| 3505 | |
| 3506 | ENUM |
| 3507 | BFD_RELOC_DLX_HI16_S |
| 3508 | ENUMDOC |
| 3509 | DLX relocs |
| 3510 | ENUM |
| 3511 | BFD_RELOC_DLX_LO16 |
| 3512 | ENUMDOC |
| 3513 | DLX relocs |
| 3514 | ENUM |
| 3515 | BFD_RELOC_DLX_JMP26 |
| 3516 | ENUMDOC |
| 3517 | DLX relocs |
| 3518 | |
| 3519 | ENUM |
| 3520 | BFD_RELOC_M32C_HI8 |
| 3521 | ENUMX |
| 3522 | BFD_RELOC_M32C_RL_JUMP |
| 3523 | ENUMX |
| 3524 | BFD_RELOC_M32C_RL_1ADDR |
| 3525 | ENUMX |
| 3526 | BFD_RELOC_M32C_RL_2ADDR |
| 3527 | ENUMDOC |
| 3528 | Renesas M16C/M32C Relocations. |
| 3529 | |
| 3530 | ENUM |
| 3531 | BFD_RELOC_M32R_24 |
| 3532 | ENUMDOC |
| 3533 | Renesas M32R (formerly Mitsubishi M32R) relocs. |
| 3534 | This is a 24 bit absolute address. |
| 3535 | ENUM |
| 3536 | BFD_RELOC_M32R_10_PCREL |
| 3537 | ENUMDOC |
| 3538 | This is a 10-bit pc-relative reloc with the right 2 bits assumed to be 0. |
| 3539 | ENUM |
| 3540 | BFD_RELOC_M32R_18_PCREL |
| 3541 | ENUMDOC |
| 3542 | This is an 18-bit reloc with the right 2 bits assumed to be 0. |
| 3543 | ENUM |
| 3544 | BFD_RELOC_M32R_26_PCREL |
| 3545 | ENUMDOC |
| 3546 | This is a 26-bit reloc with the right 2 bits assumed to be 0. |
| 3547 | ENUM |
| 3548 | BFD_RELOC_M32R_HI16_ULO |
| 3549 | ENUMDOC |
| 3550 | This is a 16-bit reloc containing the high 16 bits of an address |
| 3551 | used when the lower 16 bits are treated as unsigned. |
| 3552 | ENUM |
| 3553 | BFD_RELOC_M32R_HI16_SLO |
| 3554 | ENUMDOC |
| 3555 | This is a 16-bit reloc containing the high 16 bits of an address |
| 3556 | used when the lower 16 bits are treated as signed. |
| 3557 | ENUM |
| 3558 | BFD_RELOC_M32R_LO16 |
| 3559 | ENUMDOC |
| 3560 | This is a 16-bit reloc containing the lower 16 bits of an address. |
| 3561 | ENUM |
| 3562 | BFD_RELOC_M32R_SDA16 |
| 3563 | ENUMDOC |
| 3564 | This is a 16-bit reloc containing the small data area offset for use in |
| 3565 | add3, load, and store instructions. |
| 3566 | ENUM |
| 3567 | BFD_RELOC_M32R_GOT24 |
| 3568 | ENUMX |
| 3569 | BFD_RELOC_M32R_26_PLTREL |
| 3570 | ENUMX |
| 3571 | BFD_RELOC_M32R_COPY |
| 3572 | ENUMX |
| 3573 | BFD_RELOC_M32R_GLOB_DAT |
| 3574 | ENUMX |
| 3575 | BFD_RELOC_M32R_JMP_SLOT |
| 3576 | ENUMX |
| 3577 | BFD_RELOC_M32R_RELATIVE |
| 3578 | ENUMX |
| 3579 | BFD_RELOC_M32R_GOTOFF |
| 3580 | ENUMX |
| 3581 | BFD_RELOC_M32R_GOTOFF_HI_ULO |
| 3582 | ENUMX |
| 3583 | BFD_RELOC_M32R_GOTOFF_HI_SLO |
| 3584 | ENUMX |
| 3585 | BFD_RELOC_M32R_GOTOFF_LO |
| 3586 | ENUMX |
| 3587 | BFD_RELOC_M32R_GOTPC24 |
| 3588 | ENUMX |
| 3589 | BFD_RELOC_M32R_GOT16_HI_ULO |
| 3590 | ENUMX |
| 3591 | BFD_RELOC_M32R_GOT16_HI_SLO |
| 3592 | ENUMX |
| 3593 | BFD_RELOC_M32R_GOT16_LO |
| 3594 | ENUMX |
| 3595 | BFD_RELOC_M32R_GOTPC_HI_ULO |
| 3596 | ENUMX |
| 3597 | BFD_RELOC_M32R_GOTPC_HI_SLO |
| 3598 | ENUMX |
| 3599 | BFD_RELOC_M32R_GOTPC_LO |
| 3600 | ENUMDOC |
| 3601 | For PIC. |
| 3602 | |
| 3603 | |
| 3604 | ENUM |
| 3605 | BFD_RELOC_V850_9_PCREL |
| 3606 | ENUMDOC |
| 3607 | This is a 9-bit reloc |
| 3608 | ENUM |
| 3609 | BFD_RELOC_V850_22_PCREL |
| 3610 | ENUMDOC |
| 3611 | This is a 22-bit reloc |
| 3612 | |
| 3613 | ENUM |
| 3614 | BFD_RELOC_V850_SDA_16_16_OFFSET |
| 3615 | ENUMDOC |
| 3616 | This is a 16 bit offset from the short data area pointer. |
| 3617 | ENUM |
| 3618 | BFD_RELOC_V850_SDA_15_16_OFFSET |
| 3619 | ENUMDOC |
| 3620 | This is a 16 bit offset (of which only 15 bits are used) from the |
| 3621 | short data area pointer. |
| 3622 | ENUM |
| 3623 | BFD_RELOC_V850_ZDA_16_16_OFFSET |
| 3624 | ENUMDOC |
| 3625 | This is a 16 bit offset from the zero data area pointer. |
| 3626 | ENUM |
| 3627 | BFD_RELOC_V850_ZDA_15_16_OFFSET |
| 3628 | ENUMDOC |
| 3629 | This is a 16 bit offset (of which only 15 bits are used) from the |
| 3630 | zero data area pointer. |
| 3631 | ENUM |
| 3632 | BFD_RELOC_V850_TDA_6_8_OFFSET |
| 3633 | ENUMDOC |
| 3634 | This is an 8 bit offset (of which only 6 bits are used) from the |
| 3635 | tiny data area pointer. |
| 3636 | ENUM |
| 3637 | BFD_RELOC_V850_TDA_7_8_OFFSET |
| 3638 | ENUMDOC |
| 3639 | This is an 8bit offset (of which only 7 bits are used) from the tiny |
| 3640 | data area pointer. |
| 3641 | ENUM |
| 3642 | BFD_RELOC_V850_TDA_7_7_OFFSET |
| 3643 | ENUMDOC |
| 3644 | This is a 7 bit offset from the tiny data area pointer. |
| 3645 | ENUM |
| 3646 | BFD_RELOC_V850_TDA_16_16_OFFSET |
| 3647 | ENUMDOC |
| 3648 | This is a 16 bit offset from the tiny data area pointer. |
| 3649 | COMMENT |
| 3650 | ENUM |
| 3651 | BFD_RELOC_V850_TDA_4_5_OFFSET |
| 3652 | ENUMDOC |
| 3653 | This is a 5 bit offset (of which only 4 bits are used) from the tiny |
| 3654 | data area pointer. |
| 3655 | ENUM |
| 3656 | BFD_RELOC_V850_TDA_4_4_OFFSET |
| 3657 | ENUMDOC |
| 3658 | This is a 4 bit offset from the tiny data area pointer. |
| 3659 | ENUM |
| 3660 | BFD_RELOC_V850_SDA_16_16_SPLIT_OFFSET |
| 3661 | ENUMDOC |
| 3662 | This is a 16 bit offset from the short data area pointer, with the |
| 3663 | bits placed non-contiguously in the instruction. |
| 3664 | ENUM |
| 3665 | BFD_RELOC_V850_ZDA_16_16_SPLIT_OFFSET |
| 3666 | ENUMDOC |
| 3667 | This is a 16 bit offset from the zero data area pointer, with the |
| 3668 | bits placed non-contiguously in the instruction. |
| 3669 | ENUM |
| 3670 | BFD_RELOC_V850_CALLT_6_7_OFFSET |
| 3671 | ENUMDOC |
| 3672 | This is a 6 bit offset from the call table base pointer. |
| 3673 | ENUM |
| 3674 | BFD_RELOC_V850_CALLT_16_16_OFFSET |
| 3675 | ENUMDOC |
| 3676 | This is a 16 bit offset from the call table base pointer. |
| 3677 | ENUM |
| 3678 | BFD_RELOC_V850_LONGCALL |
| 3679 | ENUMDOC |
| 3680 | Used for relaxing indirect function calls. |
| 3681 | ENUM |
| 3682 | BFD_RELOC_V850_LONGJUMP |
| 3683 | ENUMDOC |
| 3684 | Used for relaxing indirect jumps. |
| 3685 | ENUM |
| 3686 | BFD_RELOC_V850_ALIGN |
| 3687 | ENUMDOC |
| 3688 | Used to maintain alignment whilst relaxing. |
| 3689 | ENUM |
| 3690 | BFD_RELOC_V850_LO16_SPLIT_OFFSET |
| 3691 | ENUMDOC |
| 3692 | This is a variation of BFD_RELOC_LO16 that can be used in v850e ld.bu |
| 3693 | instructions. |
| 3694 | ENUM |
| 3695 | BFD_RELOC_MN10300_32_PCREL |
| 3696 | ENUMDOC |
| 3697 | This is a 32bit pcrel reloc for the mn10300, offset by two bytes in the |
| 3698 | instruction. |
| 3699 | ENUM |
| 3700 | BFD_RELOC_MN10300_16_PCREL |
| 3701 | ENUMDOC |
| 3702 | This is a 16bit pcrel reloc for the mn10300, offset by two bytes in the |
| 3703 | instruction. |
| 3704 | |
| 3705 | ENUM |
| 3706 | BFD_RELOC_TIC30_LDP |
| 3707 | ENUMDOC |
| 3708 | This is a 8bit DP reloc for the tms320c30, where the most |
| 3709 | significant 8 bits of a 24 bit word are placed into the least |
| 3710 | significant 8 bits of the opcode. |
| 3711 | |
| 3712 | ENUM |
| 3713 | BFD_RELOC_TIC54X_PARTLS7 |
| 3714 | ENUMDOC |
| 3715 | This is a 7bit reloc for the tms320c54x, where the least |
| 3716 | significant 7 bits of a 16 bit word are placed into the least |
| 3717 | significant 7 bits of the opcode. |
| 3718 | |
| 3719 | ENUM |
| 3720 | BFD_RELOC_TIC54X_PARTMS9 |
| 3721 | ENUMDOC |
| 3722 | This is a 9bit DP reloc for the tms320c54x, where the most |
| 3723 | significant 9 bits of a 16 bit word are placed into the least |
| 3724 | significant 9 bits of the opcode. |
| 3725 | |
| 3726 | ENUM |
| 3727 | BFD_RELOC_TIC54X_23 |
| 3728 | ENUMDOC |
| 3729 | This is an extended address 23-bit reloc for the tms320c54x. |
| 3730 | |
| 3731 | ENUM |
| 3732 | BFD_RELOC_TIC54X_16_OF_23 |
| 3733 | ENUMDOC |
| 3734 | This is a 16-bit reloc for the tms320c54x, where the least |
| 3735 | significant 16 bits of a 23-bit extended address are placed into |
| 3736 | the opcode. |
| 3737 | |
| 3738 | ENUM |
| 3739 | BFD_RELOC_TIC54X_MS7_OF_23 |
| 3740 | ENUMDOC |
| 3741 | This is a reloc for the tms320c54x, where the most |
| 3742 | significant 7 bits of a 23-bit extended address are placed into |
| 3743 | the opcode. |
| 3744 | |
| 3745 | ENUM |
| 3746 | BFD_RELOC_FR30_48 |
| 3747 | ENUMDOC |
| 3748 | This is a 48 bit reloc for the FR30 that stores 32 bits. |
| 3749 | ENUM |
| 3750 | BFD_RELOC_FR30_20 |
| 3751 | ENUMDOC |
| 3752 | This is a 32 bit reloc for the FR30 that stores 20 bits split up into |
| 3753 | two sections. |
| 3754 | ENUM |
| 3755 | BFD_RELOC_FR30_6_IN_4 |
| 3756 | ENUMDOC |
| 3757 | This is a 16 bit reloc for the FR30 that stores a 6 bit word offset in |
| 3758 | 4 bits. |
| 3759 | ENUM |
| 3760 | BFD_RELOC_FR30_8_IN_8 |
| 3761 | ENUMDOC |
| 3762 | This is a 16 bit reloc for the FR30 that stores an 8 bit byte offset |
| 3763 | into 8 bits. |
| 3764 | ENUM |
| 3765 | BFD_RELOC_FR30_9_IN_8 |
| 3766 | ENUMDOC |
| 3767 | This is a 16 bit reloc for the FR30 that stores a 9 bit short offset |
| 3768 | into 8 bits. |
| 3769 | ENUM |
| 3770 | BFD_RELOC_FR30_10_IN_8 |
| 3771 | ENUMDOC |
| 3772 | This is a 16 bit reloc for the FR30 that stores a 10 bit word offset |
| 3773 | into 8 bits. |
| 3774 | ENUM |
| 3775 | BFD_RELOC_FR30_9_PCREL |
| 3776 | ENUMDOC |
| 3777 | This is a 16 bit reloc for the FR30 that stores a 9 bit pc relative |
| 3778 | short offset into 8 bits. |
| 3779 | ENUM |
| 3780 | BFD_RELOC_FR30_12_PCREL |
| 3781 | ENUMDOC |
| 3782 | This is a 16 bit reloc for the FR30 that stores a 12 bit pc relative |
| 3783 | short offset into 11 bits. |
| 3784 | |
| 3785 | ENUM |
| 3786 | BFD_RELOC_MCORE_PCREL_IMM8BY4 |
| 3787 | ENUMX |
| 3788 | BFD_RELOC_MCORE_PCREL_IMM11BY2 |
| 3789 | ENUMX |
| 3790 | BFD_RELOC_MCORE_PCREL_IMM4BY2 |
| 3791 | ENUMX |
| 3792 | BFD_RELOC_MCORE_PCREL_32 |
| 3793 | ENUMX |
| 3794 | BFD_RELOC_MCORE_PCREL_JSR_IMM11BY2 |
| 3795 | ENUMX |
| 3796 | BFD_RELOC_MCORE_RVA |
| 3797 | ENUMDOC |
| 3798 | Motorola Mcore relocations. |
| 3799 | |
| 3800 | ENUM |
| 3801 | BFD_RELOC_MEP_8 |
| 3802 | ENUMX |
| 3803 | BFD_RELOC_MEP_16 |
| 3804 | ENUMX |
| 3805 | BFD_RELOC_MEP_32 |
| 3806 | ENUMX |
| 3807 | BFD_RELOC_MEP_PCREL8A2 |
| 3808 | ENUMX |
| 3809 | BFD_RELOC_MEP_PCREL12A2 |
| 3810 | ENUMX |
| 3811 | BFD_RELOC_MEP_PCREL17A2 |
| 3812 | ENUMX |
| 3813 | BFD_RELOC_MEP_PCREL24A2 |
| 3814 | ENUMX |
| 3815 | BFD_RELOC_MEP_PCABS24A2 |
| 3816 | ENUMX |
| 3817 | BFD_RELOC_MEP_LOW16 |
| 3818 | ENUMX |
| 3819 | BFD_RELOC_MEP_HI16U |
| 3820 | ENUMX |
| 3821 | BFD_RELOC_MEP_HI16S |
| 3822 | ENUMX |
| 3823 | BFD_RELOC_MEP_GPREL |
| 3824 | ENUMX |
| 3825 | BFD_RELOC_MEP_TPREL |
| 3826 | ENUMX |
| 3827 | BFD_RELOC_MEP_TPREL7 |
| 3828 | ENUMX |
| 3829 | BFD_RELOC_MEP_TPREL7A2 |
| 3830 | ENUMX |
| 3831 | BFD_RELOC_MEP_TPREL7A4 |
| 3832 | ENUMX |
| 3833 | BFD_RELOC_MEP_UIMM24 |
| 3834 | ENUMX |
| 3835 | BFD_RELOC_MEP_ADDR24A4 |
| 3836 | ENUMX |
| 3837 | BFD_RELOC_MEP_GNU_VTINHERIT |
| 3838 | ENUMX |
| 3839 | BFD_RELOC_MEP_GNU_VTENTRY |
| 3840 | ENUMDOC |
| 3841 | Toshiba Media Processor Relocations. |
| 3842 | COMMENT |
| 3843 | |
| 3844 | ENUM |
| 3845 | BFD_RELOC_MMIX_GETA |
| 3846 | ENUMX |
| 3847 | BFD_RELOC_MMIX_GETA_1 |
| 3848 | ENUMX |
| 3849 | BFD_RELOC_MMIX_GETA_2 |
| 3850 | ENUMX |
| 3851 | BFD_RELOC_MMIX_GETA_3 |
| 3852 | ENUMDOC |
| 3853 | These are relocations for the GETA instruction. |
| 3854 | ENUM |
| 3855 | BFD_RELOC_MMIX_CBRANCH |
| 3856 | ENUMX |
| 3857 | BFD_RELOC_MMIX_CBRANCH_J |
| 3858 | ENUMX |
| 3859 | BFD_RELOC_MMIX_CBRANCH_1 |
| 3860 | ENUMX |
| 3861 | BFD_RELOC_MMIX_CBRANCH_2 |
| 3862 | ENUMX |
| 3863 | BFD_RELOC_MMIX_CBRANCH_3 |
| 3864 | ENUMDOC |
| 3865 | These are relocations for a conditional branch instruction. |
| 3866 | ENUM |
| 3867 | BFD_RELOC_MMIX_PUSHJ |
| 3868 | ENUMX |
| 3869 | BFD_RELOC_MMIX_PUSHJ_1 |
| 3870 | ENUMX |
| 3871 | BFD_RELOC_MMIX_PUSHJ_2 |
| 3872 | ENUMX |
| 3873 | BFD_RELOC_MMIX_PUSHJ_3 |
| 3874 | ENUMX |
| 3875 | BFD_RELOC_MMIX_PUSHJ_STUBBABLE |
| 3876 | ENUMDOC |
| 3877 | These are relocations for the PUSHJ instruction. |
| 3878 | ENUM |
| 3879 | BFD_RELOC_MMIX_JMP |
| 3880 | ENUMX |
| 3881 | BFD_RELOC_MMIX_JMP_1 |
| 3882 | ENUMX |
| 3883 | BFD_RELOC_MMIX_JMP_2 |
| 3884 | ENUMX |
| 3885 | BFD_RELOC_MMIX_JMP_3 |
| 3886 | ENUMDOC |
| 3887 | These are relocations for the JMP instruction. |
| 3888 | ENUM |
| 3889 | BFD_RELOC_MMIX_ADDR19 |
| 3890 | ENUMDOC |
| 3891 | This is a relocation for a relative address as in a GETA instruction or |
| 3892 | a branch. |
| 3893 | ENUM |
| 3894 | BFD_RELOC_MMIX_ADDR27 |
| 3895 | ENUMDOC |
| 3896 | This is a relocation for a relative address as in a JMP instruction. |
| 3897 | ENUM |
| 3898 | BFD_RELOC_MMIX_REG_OR_BYTE |
| 3899 | ENUMDOC |
| 3900 | This is a relocation for an instruction field that may be a general |
| 3901 | register or a value 0..255. |
| 3902 | ENUM |
| 3903 | BFD_RELOC_MMIX_REG |
| 3904 | ENUMDOC |
| 3905 | This is a relocation for an instruction field that may be a general |
| 3906 | register. |
| 3907 | ENUM |
| 3908 | BFD_RELOC_MMIX_BASE_PLUS_OFFSET |
| 3909 | ENUMDOC |
| 3910 | This is a relocation for two instruction fields holding a register and |
| 3911 | an offset, the equivalent of the relocation. |
| 3912 | ENUM |
| 3913 | BFD_RELOC_MMIX_LOCAL |
| 3914 | ENUMDOC |
| 3915 | This relocation is an assertion that the expression is not allocated as |
| 3916 | a global register. It does not modify contents. |
| 3917 | |
| 3918 | ENUM |
| 3919 | BFD_RELOC_AVR_7_PCREL |
| 3920 | ENUMDOC |
| 3921 | This is a 16 bit reloc for the AVR that stores 8 bit pc relative |
| 3922 | short offset into 7 bits. |
| 3923 | ENUM |
| 3924 | BFD_RELOC_AVR_13_PCREL |
| 3925 | ENUMDOC |
| 3926 | This is a 16 bit reloc for the AVR that stores 13 bit pc relative |
| 3927 | short offset into 12 bits. |
| 3928 | ENUM |
| 3929 | BFD_RELOC_AVR_16_PM |
| 3930 | ENUMDOC |
| 3931 | This is a 16 bit reloc for the AVR that stores 17 bit value (usually |
| 3932 | program memory address) into 16 bits. |
| 3933 | ENUM |
| 3934 | BFD_RELOC_AVR_LO8_LDI |
| 3935 | ENUMDOC |
| 3936 | This is a 16 bit reloc for the AVR that stores 8 bit value (usually |
| 3937 | data memory address) into 8 bit immediate value of LDI insn. |
| 3938 | ENUM |
| 3939 | BFD_RELOC_AVR_HI8_LDI |
| 3940 | ENUMDOC |
| 3941 | This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit |
| 3942 | of data memory address) into 8 bit immediate value of LDI insn. |
| 3943 | ENUM |
| 3944 | BFD_RELOC_AVR_HH8_LDI |
| 3945 | ENUMDOC |
| 3946 | This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit |
| 3947 | of program memory address) into 8 bit immediate value of LDI insn. |
| 3948 | ENUM |
| 3949 | BFD_RELOC_AVR_MS8_LDI |
| 3950 | ENUMDOC |
| 3951 | This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit |
| 3952 | of 32 bit value) into 8 bit immediate value of LDI insn. |
| 3953 | ENUM |
| 3954 | BFD_RELOC_AVR_LO8_LDI_NEG |
| 3955 | ENUMDOC |
| 3956 | This is a 16 bit reloc for the AVR that stores negated 8 bit value |
| 3957 | (usually data memory address) into 8 bit immediate value of SUBI insn. |
| 3958 | ENUM |
| 3959 | BFD_RELOC_AVR_HI8_LDI_NEG |
| 3960 | ENUMDOC |
| 3961 | This is a 16 bit reloc for the AVR that stores negated 8 bit value |
| 3962 | (high 8 bit of data memory address) into 8 bit immediate value of |
| 3963 | SUBI insn. |
| 3964 | ENUM |
| 3965 | BFD_RELOC_AVR_HH8_LDI_NEG |
| 3966 | ENUMDOC |
| 3967 | This is a 16 bit reloc for the AVR that stores negated 8 bit value |
| 3968 | (most high 8 bit of program memory address) into 8 bit immediate value |
| 3969 | of LDI or SUBI insn. |
| 3970 | ENUM |
| 3971 | BFD_RELOC_AVR_MS8_LDI_NEG |
| 3972 | ENUMDOC |
| 3973 | This is a 16 bit reloc for the AVR that stores negated 8 bit value (msb |
| 3974 | of 32 bit value) into 8 bit immediate value of LDI insn. |
| 3975 | ENUM |
| 3976 | BFD_RELOC_AVR_LO8_LDI_PM |
| 3977 | ENUMDOC |
| 3978 | This is a 16 bit reloc for the AVR that stores 8 bit value (usually |
| 3979 | command address) into 8 bit immediate value of LDI insn. |
| 3980 | ENUM |
| 3981 | BFD_RELOC_AVR_LO8_LDI_GS |
| 3982 | ENUMDOC |
| 3983 | This is a 16 bit reloc for the AVR that stores 8 bit value |
| 3984 | (command address) into 8 bit immediate value of LDI insn. If the address |
| 3985 | is beyond the 128k boundary, the linker inserts a jump stub for this reloc |
| 3986 | in the lower 128k. |
| 3987 | ENUM |
| 3988 | BFD_RELOC_AVR_HI8_LDI_PM |
| 3989 | ENUMDOC |
| 3990 | This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit |
| 3991 | of command address) into 8 bit immediate value of LDI insn. |
| 3992 | ENUM |
| 3993 | BFD_RELOC_AVR_HI8_LDI_GS |
| 3994 | ENUMDOC |
| 3995 | This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit |
| 3996 | of command address) into 8 bit immediate value of LDI insn. If the address |
| 3997 | is beyond the 128k boundary, the linker inserts a jump stub for this reloc |
| 3998 | below 128k. |
| 3999 | ENUM |
| 4000 | BFD_RELOC_AVR_HH8_LDI_PM |
| 4001 | ENUMDOC |
| 4002 | This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit |
| 4003 | of command address) into 8 bit immediate value of LDI insn. |
| 4004 | ENUM |
| 4005 | BFD_RELOC_AVR_LO8_LDI_PM_NEG |
| 4006 | ENUMDOC |
| 4007 | This is a 16 bit reloc for the AVR that stores negated 8 bit value |
| 4008 | (usually command address) into 8 bit immediate value of SUBI insn. |
| 4009 | ENUM |
| 4010 | BFD_RELOC_AVR_HI8_LDI_PM_NEG |
| 4011 | ENUMDOC |
| 4012 | This is a 16 bit reloc for the AVR that stores negated 8 bit value |
| 4013 | (high 8 bit of 16 bit command address) into 8 bit immediate value |
| 4014 | of SUBI insn. |
| 4015 | ENUM |
| 4016 | BFD_RELOC_AVR_HH8_LDI_PM_NEG |
| 4017 | ENUMDOC |
| 4018 | This is a 16 bit reloc for the AVR that stores negated 8 bit value |
| 4019 | (high 6 bit of 22 bit command address) into 8 bit immediate |
| 4020 | value of SUBI insn. |
| 4021 | ENUM |
| 4022 | BFD_RELOC_AVR_CALL |
| 4023 | ENUMDOC |
| 4024 | This is a 32 bit reloc for the AVR that stores 23 bit value |
| 4025 | into 22 bits. |
| 4026 | ENUM |
| 4027 | BFD_RELOC_AVR_LDI |
| 4028 | ENUMDOC |
| 4029 | This is a 16 bit reloc for the AVR that stores all needed bits |
| 4030 | for absolute addressing with ldi with overflow check to linktime |
| 4031 | ENUM |
| 4032 | BFD_RELOC_AVR_6 |
| 4033 | ENUMDOC |
| 4034 | This is a 6 bit reloc for the AVR that stores offset for ldd/std |
| 4035 | instructions |
| 4036 | ENUM |
| 4037 | BFD_RELOC_AVR_6_ADIW |
| 4038 | ENUMDOC |
| 4039 | This is a 6 bit reloc for the AVR that stores offset for adiw/sbiw |
| 4040 | instructions |
| 4041 | |
| 4042 | ENUM |
| 4043 | BFD_RELOC_390_12 |
| 4044 | ENUMDOC |
| 4045 | Direct 12 bit. |
| 4046 | ENUM |
| 4047 | BFD_RELOC_390_GOT12 |
| 4048 | ENUMDOC |
| 4049 | 12 bit GOT offset. |
| 4050 | ENUM |
| 4051 | BFD_RELOC_390_PLT32 |
| 4052 | ENUMDOC |
| 4053 | 32 bit PC relative PLT address. |
| 4054 | ENUM |
| 4055 | BFD_RELOC_390_COPY |
| 4056 | ENUMDOC |
| 4057 | Copy symbol at runtime. |
| 4058 | ENUM |
| 4059 | BFD_RELOC_390_GLOB_DAT |
| 4060 | ENUMDOC |
| 4061 | Create GOT entry. |
| 4062 | ENUM |
| 4063 | BFD_RELOC_390_JMP_SLOT |
| 4064 | ENUMDOC |
| 4065 | Create PLT entry. |
| 4066 | ENUM |
| 4067 | BFD_RELOC_390_RELATIVE |
| 4068 | ENUMDOC |
| 4069 | Adjust by program base. |
| 4070 | ENUM |
| 4071 | BFD_RELOC_390_GOTPC |
| 4072 | ENUMDOC |
| 4073 | 32 bit PC relative offset to GOT. |
| 4074 | ENUM |
| 4075 | BFD_RELOC_390_GOT16 |
| 4076 | ENUMDOC |
| 4077 | 16 bit GOT offset. |
| 4078 | ENUM |
| 4079 | BFD_RELOC_390_PC16DBL |
| 4080 | ENUMDOC |
| 4081 | PC relative 16 bit shifted by 1. |
| 4082 | ENUM |
| 4083 | BFD_RELOC_390_PLT16DBL |
| 4084 | ENUMDOC |
| 4085 | 16 bit PC rel. PLT shifted by 1. |
| 4086 | ENUM |
| 4087 | BFD_RELOC_390_PC32DBL |
| 4088 | ENUMDOC |
| 4089 | PC relative 32 bit shifted by 1. |
| 4090 | ENUM |
| 4091 | BFD_RELOC_390_PLT32DBL |
| 4092 | ENUMDOC |
| 4093 | 32 bit PC rel. PLT shifted by 1. |
| 4094 | ENUM |
| 4095 | BFD_RELOC_390_GOTPCDBL |
| 4096 | ENUMDOC |
| 4097 | 32 bit PC rel. GOT shifted by 1. |
| 4098 | ENUM |
| 4099 | BFD_RELOC_390_GOT64 |
| 4100 | ENUMDOC |
| 4101 | 64 bit GOT offset. |
| 4102 | ENUM |
| 4103 | BFD_RELOC_390_PLT64 |
| 4104 | ENUMDOC |
| 4105 | 64 bit PC relative PLT address. |
| 4106 | ENUM |
| 4107 | BFD_RELOC_390_GOTENT |
| 4108 | ENUMDOC |
| 4109 | 32 bit rel. offset to GOT entry. |
| 4110 | ENUM |
| 4111 | BFD_RELOC_390_GOTOFF64 |
| 4112 | ENUMDOC |
| 4113 | 64 bit offset to GOT. |
| 4114 | ENUM |
| 4115 | BFD_RELOC_390_GOTPLT12 |
| 4116 | ENUMDOC |
| 4117 | 12-bit offset to symbol-entry within GOT, with PLT handling. |
| 4118 | ENUM |
| 4119 | BFD_RELOC_390_GOTPLT16 |
| 4120 | ENUMDOC |
| 4121 | 16-bit offset to symbol-entry within GOT, with PLT handling. |
| 4122 | ENUM |
| 4123 | BFD_RELOC_390_GOTPLT32 |
| 4124 | ENUMDOC |
| 4125 | 32-bit offset to symbol-entry within GOT, with PLT handling. |
| 4126 | ENUM |
| 4127 | BFD_RELOC_390_GOTPLT64 |
| 4128 | ENUMDOC |
| 4129 | 64-bit offset to symbol-entry within GOT, with PLT handling. |
| 4130 | ENUM |
| 4131 | BFD_RELOC_390_GOTPLTENT |
| 4132 | ENUMDOC |
| 4133 | 32-bit rel. offset to symbol-entry within GOT, with PLT handling. |
| 4134 | ENUM |
| 4135 | BFD_RELOC_390_PLTOFF16 |
| 4136 | ENUMDOC |
| 4137 | 16-bit rel. offset from the GOT to a PLT entry. |
| 4138 | ENUM |
| 4139 | BFD_RELOC_390_PLTOFF32 |
| 4140 | ENUMDOC |
| 4141 | 32-bit rel. offset from the GOT to a PLT entry. |
| 4142 | ENUM |
| 4143 | BFD_RELOC_390_PLTOFF64 |
| 4144 | ENUMDOC |
| 4145 | 64-bit rel. offset from the GOT to a PLT entry. |
| 4146 | |
| 4147 | ENUM |
| 4148 | BFD_RELOC_390_TLS_LOAD |
| 4149 | ENUMX |
| 4150 | BFD_RELOC_390_TLS_GDCALL |
| 4151 | ENUMX |
| 4152 | BFD_RELOC_390_TLS_LDCALL |
| 4153 | ENUMX |
| 4154 | BFD_RELOC_390_TLS_GD32 |
| 4155 | ENUMX |
| 4156 | BFD_RELOC_390_TLS_GD64 |
| 4157 | ENUMX |
| 4158 | BFD_RELOC_390_TLS_GOTIE12 |
| 4159 | ENUMX |
| 4160 | BFD_RELOC_390_TLS_GOTIE32 |
| 4161 | ENUMX |
| 4162 | BFD_RELOC_390_TLS_GOTIE64 |
| 4163 | ENUMX |
| 4164 | BFD_RELOC_390_TLS_LDM32 |
| 4165 | ENUMX |
| 4166 | BFD_RELOC_390_TLS_LDM64 |
| 4167 | ENUMX |
| 4168 | BFD_RELOC_390_TLS_IE32 |
| 4169 | ENUMX |
| 4170 | BFD_RELOC_390_TLS_IE64 |
| 4171 | ENUMX |
| 4172 | BFD_RELOC_390_TLS_IEENT |
| 4173 | ENUMX |
| 4174 | BFD_RELOC_390_TLS_LE32 |
| 4175 | ENUMX |
| 4176 | BFD_RELOC_390_TLS_LE64 |
| 4177 | ENUMX |
| 4178 | BFD_RELOC_390_TLS_LDO32 |
| 4179 | ENUMX |
| 4180 | BFD_RELOC_390_TLS_LDO64 |
| 4181 | ENUMX |
| 4182 | BFD_RELOC_390_TLS_DTPMOD |
| 4183 | ENUMX |
| 4184 | BFD_RELOC_390_TLS_DTPOFF |
| 4185 | ENUMX |
| 4186 | BFD_RELOC_390_TLS_TPOFF |
| 4187 | ENUMDOC |
| 4188 | s390 tls relocations. |
| 4189 | |
| 4190 | ENUM |
| 4191 | BFD_RELOC_390_20 |
| 4192 | ENUMX |
| 4193 | BFD_RELOC_390_GOT20 |
| 4194 | ENUMX |
| 4195 | BFD_RELOC_390_GOTPLT20 |
| 4196 | ENUMX |
| 4197 | BFD_RELOC_390_TLS_GOTIE20 |
| 4198 | ENUMDOC |
| 4199 | Long displacement extension. |
| 4200 | |
| 4201 | ENUM |
| 4202 | BFD_RELOC_SCORE_GPREL15 |
| 4203 | ENUMDOC |
| 4204 | Score relocations |
| 4205 | Low 16 bit for load/store |
| 4206 | ENUM |
| 4207 | BFD_RELOC_SCORE_DUMMY2 |
| 4208 | ENUMX |
| 4209 | BFD_RELOC_SCORE_JMP |
| 4210 | ENUMDOC |
| 4211 | This is a 24-bit reloc with the right 1 bit assumed to be 0 |
| 4212 | ENUM |
| 4213 | BFD_RELOC_SCORE_BRANCH |
| 4214 | ENUMDOC |
| 4215 | This is a 19-bit reloc with the right 1 bit assumed to be 0 |
| 4216 | ENUM |
| 4217 | BFD_RELOC_SCORE_IMM30 |
| 4218 | ENUMDOC |
| 4219 | This is a 32-bit reloc for 48-bit instructions. |
| 4220 | ENUM |
| 4221 | BFD_RELOC_SCORE_IMM32 |
| 4222 | ENUMDOC |
| 4223 | This is a 32-bit reloc for 48-bit instructions. |
| 4224 | ENUM |
| 4225 | BFD_RELOC_SCORE16_JMP |
| 4226 | ENUMDOC |
| 4227 | This is a 11-bit reloc with the right 1 bit assumed to be 0 |
| 4228 | ENUM |
| 4229 | BFD_RELOC_SCORE16_BRANCH |
| 4230 | ENUMDOC |
| 4231 | This is a 8-bit reloc with the right 1 bit assumed to be 0 |
| 4232 | ENUM |
| 4233 | BFD_RELOC_SCORE_BCMP |
| 4234 | ENUMDOC |
| 4235 | This is a 9-bit reloc with the right 1 bit assumed to be 0 |
| 4236 | ENUM |
| 4237 | BFD_RELOC_SCORE_GOT15 |
| 4238 | ENUMX |
| 4239 | BFD_RELOC_SCORE_GOT_LO16 |
| 4240 | ENUMX |
| 4241 | BFD_RELOC_SCORE_CALL15 |
| 4242 | ENUMX |
| 4243 | BFD_RELOC_SCORE_DUMMY_HI16 |
| 4244 | ENUMDOC |
| 4245 | Undocumented Score relocs |
| 4246 | |
| 4247 | ENUM |
| 4248 | BFD_RELOC_IP2K_FR9 |
| 4249 | ENUMDOC |
| 4250 | Scenix IP2K - 9-bit register number / data address |
| 4251 | ENUM |
| 4252 | BFD_RELOC_IP2K_BANK |
| 4253 | ENUMDOC |
| 4254 | Scenix IP2K - 4-bit register/data bank number |
| 4255 | ENUM |
| 4256 | BFD_RELOC_IP2K_ADDR16CJP |
| 4257 | ENUMDOC |
| 4258 | Scenix IP2K - low 13 bits of instruction word address |
| 4259 | ENUM |
| 4260 | BFD_RELOC_IP2K_PAGE3 |
| 4261 | ENUMDOC |
| 4262 | Scenix IP2K - high 3 bits of instruction word address |
| 4263 | ENUM |
| 4264 | BFD_RELOC_IP2K_LO8DATA |
| 4265 | ENUMX |
| 4266 | BFD_RELOC_IP2K_HI8DATA |
| 4267 | ENUMX |
| 4268 | BFD_RELOC_IP2K_EX8DATA |
| 4269 | ENUMDOC |
| 4270 | Scenix IP2K - ext/low/high 8 bits of data address |
| 4271 | ENUM |
| 4272 | BFD_RELOC_IP2K_LO8INSN |
| 4273 | ENUMX |
| 4274 | BFD_RELOC_IP2K_HI8INSN |
| 4275 | ENUMDOC |
| 4276 | Scenix IP2K - low/high 8 bits of instruction word address |
| 4277 | ENUM |
| 4278 | BFD_RELOC_IP2K_PC_SKIP |
| 4279 | ENUMDOC |
| 4280 | Scenix IP2K - even/odd PC modifier to modify snb pcl.0 |
| 4281 | ENUM |
| 4282 | BFD_RELOC_IP2K_TEXT |
| 4283 | ENUMDOC |
| 4284 | Scenix IP2K - 16 bit word address in text section. |
| 4285 | ENUM |
| 4286 | BFD_RELOC_IP2K_FR_OFFSET |
| 4287 | ENUMDOC |
| 4288 | Scenix IP2K - 7-bit sp or dp offset |
| 4289 | ENUM |
| 4290 | BFD_RELOC_VPE4KMATH_DATA |
| 4291 | ENUMX |
| 4292 | BFD_RELOC_VPE4KMATH_INSN |
| 4293 | ENUMDOC |
| 4294 | Scenix VPE4K coprocessor - data/insn-space addressing |
| 4295 | |
| 4296 | ENUM |
| 4297 | BFD_RELOC_VTABLE_INHERIT |
| 4298 | ENUMX |
| 4299 | BFD_RELOC_VTABLE_ENTRY |
| 4300 | ENUMDOC |
| 4301 | These two relocations are used by the linker to determine which of |
| 4302 | the entries in a C++ virtual function table are actually used. When |
| 4303 | the --gc-sections option is given, the linker will zero out the entries |
| 4304 | that are not used, so that the code for those functions need not be |
| 4305 | included in the output. |
| 4306 | |
| 4307 | VTABLE_INHERIT is a zero-space relocation used to describe to the |
| 4308 | linker the inheritance tree of a C++ virtual function table. The |
| 4309 | relocation's symbol should be the parent class' vtable, and the |
| 4310 | relocation should be located at the child vtable. |
| 4311 | |
| 4312 | VTABLE_ENTRY is a zero-space relocation that describes the use of a |
| 4313 | virtual function table entry. The reloc's symbol should refer to the |
| 4314 | table of the class mentioned in the code. Off of that base, an offset |
| 4315 | describes the entry that is being used. For Rela hosts, this offset |
| 4316 | is stored in the reloc's addend. For Rel hosts, we are forced to put |
| 4317 | this offset in the reloc's section offset. |
| 4318 | |
| 4319 | ENUM |
| 4320 | BFD_RELOC_IA64_IMM14 |
| 4321 | ENUMX |
| 4322 | BFD_RELOC_IA64_IMM22 |
| 4323 | ENUMX |
| 4324 | BFD_RELOC_IA64_IMM64 |
| 4325 | ENUMX |
| 4326 | BFD_RELOC_IA64_DIR32MSB |
| 4327 | ENUMX |
| 4328 | BFD_RELOC_IA64_DIR32LSB |
| 4329 | ENUMX |
| 4330 | BFD_RELOC_IA64_DIR64MSB |
| 4331 | ENUMX |
| 4332 | BFD_RELOC_IA64_DIR64LSB |
| 4333 | ENUMX |
| 4334 | BFD_RELOC_IA64_GPREL22 |
| 4335 | ENUMX |
| 4336 | BFD_RELOC_IA64_GPREL64I |
| 4337 | ENUMX |
| 4338 | BFD_RELOC_IA64_GPREL32MSB |
| 4339 | ENUMX |
| 4340 | BFD_RELOC_IA64_GPREL32LSB |
| 4341 | ENUMX |
| 4342 | BFD_RELOC_IA64_GPREL64MSB |
| 4343 | ENUMX |
| 4344 | BFD_RELOC_IA64_GPREL64LSB |
| 4345 | ENUMX |
| 4346 | BFD_RELOC_IA64_LTOFF22 |
| 4347 | ENUMX |
| 4348 | BFD_RELOC_IA64_LTOFF64I |
| 4349 | ENUMX |
| 4350 | BFD_RELOC_IA64_PLTOFF22 |
| 4351 | ENUMX |
| 4352 | BFD_RELOC_IA64_PLTOFF64I |
| 4353 | ENUMX |
| 4354 | BFD_RELOC_IA64_PLTOFF64MSB |
| 4355 | ENUMX |
| 4356 | BFD_RELOC_IA64_PLTOFF64LSB |
| 4357 | ENUMX |
| 4358 | BFD_RELOC_IA64_FPTR64I |
| 4359 | ENUMX |
| 4360 | BFD_RELOC_IA64_FPTR32MSB |
| 4361 | ENUMX |
| 4362 | BFD_RELOC_IA64_FPTR32LSB |
| 4363 | ENUMX |
| 4364 | BFD_RELOC_IA64_FPTR64MSB |
| 4365 | ENUMX |
| 4366 | BFD_RELOC_IA64_FPTR64LSB |
| 4367 | ENUMX |
| 4368 | BFD_RELOC_IA64_PCREL21B |
| 4369 | ENUMX |
| 4370 | BFD_RELOC_IA64_PCREL21BI |
| 4371 | ENUMX |
| 4372 | BFD_RELOC_IA64_PCREL21M |
| 4373 | ENUMX |
| 4374 | BFD_RELOC_IA64_PCREL21F |
| 4375 | ENUMX |
| 4376 | BFD_RELOC_IA64_PCREL22 |
| 4377 | ENUMX |
| 4378 | BFD_RELOC_IA64_PCREL60B |
| 4379 | ENUMX |
| 4380 | BFD_RELOC_IA64_PCREL64I |
| 4381 | ENUMX |
| 4382 | BFD_RELOC_IA64_PCREL32MSB |
| 4383 | ENUMX |
| 4384 | BFD_RELOC_IA64_PCREL32LSB |
| 4385 | ENUMX |
| 4386 | BFD_RELOC_IA64_PCREL64MSB |
| 4387 | ENUMX |
| 4388 | BFD_RELOC_IA64_PCREL64LSB |
| 4389 | ENUMX |
| 4390 | BFD_RELOC_IA64_LTOFF_FPTR22 |
| 4391 | ENUMX |
| 4392 | BFD_RELOC_IA64_LTOFF_FPTR64I |
| 4393 | ENUMX |
| 4394 | BFD_RELOC_IA64_LTOFF_FPTR32MSB |
| 4395 | ENUMX |
| 4396 | BFD_RELOC_IA64_LTOFF_FPTR32LSB |
| 4397 | ENUMX |
| 4398 | BFD_RELOC_IA64_LTOFF_FPTR64MSB |
| 4399 | ENUMX |
| 4400 | BFD_RELOC_IA64_LTOFF_FPTR64LSB |
| 4401 | ENUMX |
| 4402 | BFD_RELOC_IA64_SEGREL32MSB |
| 4403 | ENUMX |
| 4404 | BFD_RELOC_IA64_SEGREL32LSB |
| 4405 | ENUMX |
| 4406 | BFD_RELOC_IA64_SEGREL64MSB |
| 4407 | ENUMX |
| 4408 | BFD_RELOC_IA64_SEGREL64LSB |
| 4409 | ENUMX |
| 4410 | BFD_RELOC_IA64_SECREL32MSB |
| 4411 | ENUMX |
| 4412 | BFD_RELOC_IA64_SECREL32LSB |
| 4413 | ENUMX |
| 4414 | BFD_RELOC_IA64_SECREL64MSB |
| 4415 | ENUMX |
| 4416 | BFD_RELOC_IA64_SECREL64LSB |
| 4417 | ENUMX |
| 4418 | BFD_RELOC_IA64_REL32MSB |
| 4419 | ENUMX |
| 4420 | BFD_RELOC_IA64_REL32LSB |
| 4421 | ENUMX |
| 4422 | BFD_RELOC_IA64_REL64MSB |
| 4423 | ENUMX |
| 4424 | BFD_RELOC_IA64_REL64LSB |
| 4425 | ENUMX |
| 4426 | BFD_RELOC_IA64_LTV32MSB |
| 4427 | ENUMX |
| 4428 | BFD_RELOC_IA64_LTV32LSB |
| 4429 | ENUMX |
| 4430 | BFD_RELOC_IA64_LTV64MSB |
| 4431 | ENUMX |
| 4432 | BFD_RELOC_IA64_LTV64LSB |
| 4433 | ENUMX |
| 4434 | BFD_RELOC_IA64_IPLTMSB |
| 4435 | ENUMX |
| 4436 | BFD_RELOC_IA64_IPLTLSB |
| 4437 | ENUMX |
| 4438 | BFD_RELOC_IA64_COPY |
| 4439 | ENUMX |
| 4440 | BFD_RELOC_IA64_LTOFF22X |
| 4441 | ENUMX |
| 4442 | BFD_RELOC_IA64_LDXMOV |
| 4443 | ENUMX |
| 4444 | BFD_RELOC_IA64_TPREL14 |
| 4445 | ENUMX |
| 4446 | BFD_RELOC_IA64_TPREL22 |
| 4447 | ENUMX |
| 4448 | BFD_RELOC_IA64_TPREL64I |
| 4449 | ENUMX |
| 4450 | BFD_RELOC_IA64_TPREL64MSB |
| 4451 | ENUMX |
| 4452 | BFD_RELOC_IA64_TPREL64LSB |
| 4453 | ENUMX |
| 4454 | BFD_RELOC_IA64_LTOFF_TPREL22 |
| 4455 | ENUMX |
| 4456 | BFD_RELOC_IA64_DTPMOD64MSB |
| 4457 | ENUMX |
| 4458 | BFD_RELOC_IA64_DTPMOD64LSB |
| 4459 | ENUMX |
| 4460 | BFD_RELOC_IA64_LTOFF_DTPMOD22 |
| 4461 | ENUMX |
| 4462 | BFD_RELOC_IA64_DTPREL14 |
| 4463 | ENUMX |
| 4464 | BFD_RELOC_IA64_DTPREL22 |
| 4465 | ENUMX |
| 4466 | BFD_RELOC_IA64_DTPREL64I |
| 4467 | ENUMX |
| 4468 | BFD_RELOC_IA64_DTPREL32MSB |
| 4469 | ENUMX |
| 4470 | BFD_RELOC_IA64_DTPREL32LSB |
| 4471 | ENUMX |
| 4472 | BFD_RELOC_IA64_DTPREL64MSB |
| 4473 | ENUMX |
| 4474 | BFD_RELOC_IA64_DTPREL64LSB |
| 4475 | ENUMX |
| 4476 | BFD_RELOC_IA64_LTOFF_DTPREL22 |
| 4477 | ENUMDOC |
| 4478 | Intel IA64 Relocations. |
| 4479 | |
| 4480 | ENUM |
| 4481 | BFD_RELOC_M68HC11_HI8 |
| 4482 | ENUMDOC |
| 4483 | Motorola 68HC11 reloc. |
| 4484 | This is the 8 bit high part of an absolute address. |
| 4485 | ENUM |
| 4486 | BFD_RELOC_M68HC11_LO8 |
| 4487 | ENUMDOC |
| 4488 | Motorola 68HC11 reloc. |
| 4489 | This is the 8 bit low part of an absolute address. |
| 4490 | ENUM |
| 4491 | BFD_RELOC_M68HC11_3B |
| 4492 | ENUMDOC |
| 4493 | Motorola 68HC11 reloc. |
| 4494 | This is the 3 bit of a value. |
| 4495 | ENUM |
| 4496 | BFD_RELOC_M68HC11_RL_JUMP |
| 4497 | ENUMDOC |
| 4498 | Motorola 68HC11 reloc. |
| 4499 | This reloc marks the beginning of a jump/call instruction. |
| 4500 | It is used for linker relaxation to correctly identify beginning |
| 4501 | of instruction and change some branches to use PC-relative |
| 4502 | addressing mode. |
| 4503 | ENUM |
| 4504 | BFD_RELOC_M68HC11_RL_GROUP |
| 4505 | ENUMDOC |
| 4506 | Motorola 68HC11 reloc. |
| 4507 | This reloc marks a group of several instructions that gcc generates |
| 4508 | and for which the linker relaxation pass can modify and/or remove |
| 4509 | some of them. |
| 4510 | ENUM |
| 4511 | BFD_RELOC_M68HC11_LO16 |
| 4512 | ENUMDOC |
| 4513 | Motorola 68HC11 reloc. |
| 4514 | This is the 16-bit lower part of an address. It is used for 'call' |
| 4515 | instruction to specify the symbol address without any special |
| 4516 | transformation (due to memory bank window). |
| 4517 | ENUM |
| 4518 | BFD_RELOC_M68HC11_PAGE |
| 4519 | ENUMDOC |
| 4520 | Motorola 68HC11 reloc. |
| 4521 | This is a 8-bit reloc that specifies the page number of an address. |
| 4522 | It is used by 'call' instruction to specify the page number of |
| 4523 | the symbol. |
| 4524 | ENUM |
| 4525 | BFD_RELOC_M68HC11_24 |
| 4526 | ENUMDOC |
| 4527 | Motorola 68HC11 reloc. |
| 4528 | This is a 24-bit reloc that represents the address with a 16-bit |
| 4529 | value and a 8-bit page number. The symbol address is transformed |
| 4530 | to follow the 16K memory bank of 68HC12 (seen as mapped in the window). |
| 4531 | ENUM |
| 4532 | BFD_RELOC_M68HC12_5B |
| 4533 | ENUMDOC |
| 4534 | Motorola 68HC12 reloc. |
| 4535 | This is the 5 bits of a value. |
| 4536 | |
| 4537 | ENUM |
| 4538 | BFD_RELOC_16C_NUM08 |
| 4539 | ENUMX |
| 4540 | BFD_RELOC_16C_NUM08_C |
| 4541 | ENUMX |
| 4542 | BFD_RELOC_16C_NUM16 |
| 4543 | ENUMX |
| 4544 | BFD_RELOC_16C_NUM16_C |
| 4545 | ENUMX |
| 4546 | BFD_RELOC_16C_NUM32 |
| 4547 | ENUMX |
| 4548 | BFD_RELOC_16C_NUM32_C |
| 4549 | ENUMX |
| 4550 | BFD_RELOC_16C_DISP04 |
| 4551 | ENUMX |
| 4552 | BFD_RELOC_16C_DISP04_C |
| 4553 | ENUMX |
| 4554 | BFD_RELOC_16C_DISP08 |
| 4555 | ENUMX |
| 4556 | BFD_RELOC_16C_DISP08_C |
| 4557 | ENUMX |
| 4558 | BFD_RELOC_16C_DISP16 |
| 4559 | ENUMX |
| 4560 | BFD_RELOC_16C_DISP16_C |
| 4561 | ENUMX |
| 4562 | BFD_RELOC_16C_DISP24 |
| 4563 | ENUMX |
| 4564 | BFD_RELOC_16C_DISP24_C |
| 4565 | ENUMX |
| 4566 | BFD_RELOC_16C_DISP24a |
| 4567 | ENUMX |
| 4568 | BFD_RELOC_16C_DISP24a_C |
| 4569 | ENUMX |
| 4570 | BFD_RELOC_16C_REG04 |
| 4571 | ENUMX |
| 4572 | BFD_RELOC_16C_REG04_C |
| 4573 | ENUMX |
| 4574 | BFD_RELOC_16C_REG04a |
| 4575 | ENUMX |
| 4576 | BFD_RELOC_16C_REG04a_C |
| 4577 | ENUMX |
| 4578 | BFD_RELOC_16C_REG14 |
| 4579 | ENUMX |
| 4580 | BFD_RELOC_16C_REG14_C |
| 4581 | ENUMX |
| 4582 | BFD_RELOC_16C_REG16 |
| 4583 | ENUMX |
| 4584 | BFD_RELOC_16C_REG16_C |
| 4585 | ENUMX |
| 4586 | BFD_RELOC_16C_REG20 |
| 4587 | ENUMX |
| 4588 | BFD_RELOC_16C_REG20_C |
| 4589 | ENUMX |
| 4590 | BFD_RELOC_16C_ABS20 |
| 4591 | ENUMX |
| 4592 | BFD_RELOC_16C_ABS20_C |
| 4593 | ENUMX |
| 4594 | BFD_RELOC_16C_ABS24 |
| 4595 | ENUMX |
| 4596 | BFD_RELOC_16C_ABS24_C |
| 4597 | ENUMX |
| 4598 | BFD_RELOC_16C_IMM04 |
| 4599 | ENUMX |
| 4600 | BFD_RELOC_16C_IMM04_C |
| 4601 | ENUMX |
| 4602 | BFD_RELOC_16C_IMM16 |
| 4603 | ENUMX |
| 4604 | BFD_RELOC_16C_IMM16_C |
| 4605 | ENUMX |
| 4606 | BFD_RELOC_16C_IMM20 |
| 4607 | ENUMX |
| 4608 | BFD_RELOC_16C_IMM20_C |
| 4609 | ENUMX |
| 4610 | BFD_RELOC_16C_IMM24 |
| 4611 | ENUMX |
| 4612 | BFD_RELOC_16C_IMM24_C |
| 4613 | ENUMX |
| 4614 | BFD_RELOC_16C_IMM32 |
| 4615 | ENUMX |
| 4616 | BFD_RELOC_16C_IMM32_C |
| 4617 | ENUMDOC |
| 4618 | NS CR16C Relocations. |
| 4619 | |
| 4620 | ENUM |
| 4621 | BFD_RELOC_CR16_NUM8 |
| 4622 | ENUMX |
| 4623 | BFD_RELOC_CR16_NUM16 |
| 4624 | ENUMX |
| 4625 | BFD_RELOC_CR16_NUM32 |
| 4626 | ENUMX |
| 4627 | BFD_RELOC_CR16_NUM32a |
| 4628 | ENUMX |
| 4629 | BFD_RELOC_CR16_REGREL0 |
| 4630 | ENUMX |
| 4631 | BFD_RELOC_CR16_REGREL4 |
| 4632 | ENUMX |
| 4633 | BFD_RELOC_CR16_REGREL4a |
| 4634 | ENUMX |
| 4635 | BFD_RELOC_CR16_REGREL14 |
| 4636 | ENUMX |
| 4637 | BFD_RELOC_CR16_REGREL14a |
| 4638 | ENUMX |
| 4639 | BFD_RELOC_CR16_REGREL16 |
| 4640 | ENUMX |
| 4641 | BFD_RELOC_CR16_REGREL20 |
| 4642 | ENUMX |
| 4643 | BFD_RELOC_CR16_REGREL20a |
| 4644 | ENUMX |
| 4645 | BFD_RELOC_CR16_ABS20 |
| 4646 | ENUMX |
| 4647 | BFD_RELOC_CR16_ABS24 |
| 4648 | ENUMX |
| 4649 | BFD_RELOC_CR16_IMM4 |
| 4650 | ENUMX |
| 4651 | BFD_RELOC_CR16_IMM8 |
| 4652 | ENUMX |
| 4653 | BFD_RELOC_CR16_IMM16 |
| 4654 | ENUMX |
| 4655 | BFD_RELOC_CR16_IMM20 |
| 4656 | ENUMX |
| 4657 | BFD_RELOC_CR16_IMM24 |
| 4658 | ENUMX |
| 4659 | BFD_RELOC_CR16_IMM32 |
| 4660 | ENUMX |
| 4661 | BFD_RELOC_CR16_IMM32a |
| 4662 | ENUMX |
| 4663 | BFD_RELOC_CR16_DISP4 |
| 4664 | ENUMX |
| 4665 | BFD_RELOC_CR16_DISP8 |
| 4666 | ENUMX |
| 4667 | BFD_RELOC_CR16_DISP16 |
| 4668 | ENUMX |
| 4669 | BFD_RELOC_CR16_DISP20 |
| 4670 | ENUMX |
| 4671 | BFD_RELOC_CR16_DISP24 |
| 4672 | ENUMX |
| 4673 | BFD_RELOC_CR16_DISP24a |
| 4674 | ENUMX |
| 4675 | BFD_RELOC_CR16_SWITCH8 |
| 4676 | ENUMX |
| 4677 | BFD_RELOC_CR16_SWITCH16 |
| 4678 | ENUMX |
| 4679 | BFD_RELOC_CR16_SWITCH32 |
| 4680 | ENUMX |
| 4681 | BFD_RELOC_CR16_GOT_REGREL20 |
| 4682 | ENUMX |
| 4683 | BFD_RELOC_CR16_GOTC_REGREL20 |
| 4684 | ENUMX |
| 4685 | BFD_RELOC_CR16_GLOB_DAT |
| 4686 | ENUMDOC |
| 4687 | NS CR16 Relocations. |
| 4688 | |
| 4689 | ENUM |
| 4690 | BFD_RELOC_CRX_REL4 |
| 4691 | ENUMX |
| 4692 | BFD_RELOC_CRX_REL8 |
| 4693 | ENUMX |
| 4694 | BFD_RELOC_CRX_REL8_CMP |
| 4695 | ENUMX |
| 4696 | BFD_RELOC_CRX_REL16 |
| 4697 | ENUMX |
| 4698 | BFD_RELOC_CRX_REL24 |
| 4699 | ENUMX |
| 4700 | BFD_RELOC_CRX_REL32 |
| 4701 | ENUMX |
| 4702 | BFD_RELOC_CRX_REGREL12 |
| 4703 | ENUMX |
| 4704 | BFD_RELOC_CRX_REGREL22 |
| 4705 | ENUMX |
| 4706 | BFD_RELOC_CRX_REGREL28 |
| 4707 | ENUMX |
| 4708 | BFD_RELOC_CRX_REGREL32 |
| 4709 | ENUMX |
| 4710 | BFD_RELOC_CRX_ABS16 |
| 4711 | ENUMX |
| 4712 | BFD_RELOC_CRX_ABS32 |
| 4713 | ENUMX |
| 4714 | BFD_RELOC_CRX_NUM8 |
| 4715 | ENUMX |
| 4716 | BFD_RELOC_CRX_NUM16 |
| 4717 | ENUMX |
| 4718 | BFD_RELOC_CRX_NUM32 |
| 4719 | ENUMX |
| 4720 | BFD_RELOC_CRX_IMM16 |
| 4721 | ENUMX |
| 4722 | BFD_RELOC_CRX_IMM32 |
| 4723 | ENUMX |
| 4724 | BFD_RELOC_CRX_SWITCH8 |
| 4725 | ENUMX |
| 4726 | BFD_RELOC_CRX_SWITCH16 |
| 4727 | ENUMX |
| 4728 | BFD_RELOC_CRX_SWITCH32 |
| 4729 | ENUMDOC |
| 4730 | NS CRX Relocations. |
| 4731 | |
| 4732 | ENUM |
| 4733 | BFD_RELOC_CRIS_BDISP8 |
| 4734 | ENUMX |
| 4735 | BFD_RELOC_CRIS_UNSIGNED_5 |
| 4736 | ENUMX |
| 4737 | BFD_RELOC_CRIS_SIGNED_6 |
| 4738 | ENUMX |
| 4739 | BFD_RELOC_CRIS_UNSIGNED_6 |
| 4740 | ENUMX |
| 4741 | BFD_RELOC_CRIS_SIGNED_8 |
| 4742 | ENUMX |
| 4743 | BFD_RELOC_CRIS_UNSIGNED_8 |
| 4744 | ENUMX |
| 4745 | BFD_RELOC_CRIS_SIGNED_16 |
| 4746 | ENUMX |
| 4747 | BFD_RELOC_CRIS_UNSIGNED_16 |
| 4748 | ENUMX |
| 4749 | BFD_RELOC_CRIS_LAPCQ_OFFSET |
| 4750 | ENUMX |
| 4751 | BFD_RELOC_CRIS_UNSIGNED_4 |
| 4752 | ENUMDOC |
| 4753 | These relocs are only used within the CRIS assembler. They are not |
| 4754 | (at present) written to any object files. |
| 4755 | ENUM |
| 4756 | BFD_RELOC_CRIS_COPY |
| 4757 | ENUMX |
| 4758 | BFD_RELOC_CRIS_GLOB_DAT |
| 4759 | ENUMX |
| 4760 | BFD_RELOC_CRIS_JUMP_SLOT |
| 4761 | ENUMX |
| 4762 | BFD_RELOC_CRIS_RELATIVE |
| 4763 | ENUMDOC |
| 4764 | Relocs used in ELF shared libraries for CRIS. |
| 4765 | ENUM |
| 4766 | BFD_RELOC_CRIS_32_GOT |
| 4767 | ENUMDOC |
| 4768 | 32-bit offset to symbol-entry within GOT. |
| 4769 | ENUM |
| 4770 | BFD_RELOC_CRIS_16_GOT |
| 4771 | ENUMDOC |
| 4772 | 16-bit offset to symbol-entry within GOT. |
| 4773 | ENUM |
| 4774 | BFD_RELOC_CRIS_32_GOTPLT |
| 4775 | ENUMDOC |
| 4776 | 32-bit offset to symbol-entry within GOT, with PLT handling. |
| 4777 | ENUM |
| 4778 | BFD_RELOC_CRIS_16_GOTPLT |
| 4779 | ENUMDOC |
| 4780 | 16-bit offset to symbol-entry within GOT, with PLT handling. |
| 4781 | ENUM |
| 4782 | BFD_RELOC_CRIS_32_GOTREL |
| 4783 | ENUMDOC |
| 4784 | 32-bit offset to symbol, relative to GOT. |
| 4785 | ENUM |
| 4786 | BFD_RELOC_CRIS_32_PLT_GOTREL |
| 4787 | ENUMDOC |
| 4788 | 32-bit offset to symbol with PLT entry, relative to GOT. |
| 4789 | ENUM |
| 4790 | BFD_RELOC_CRIS_32_PLT_PCREL |
| 4791 | ENUMDOC |
| 4792 | 32-bit offset to symbol with PLT entry, relative to this relocation. |
| 4793 | |
| 4794 | ENUM |
| 4795 | BFD_RELOC_CRIS_32_GOT_GD |
| 4796 | ENUMX |
| 4797 | BFD_RELOC_CRIS_16_GOT_GD |
| 4798 | ENUMX |
| 4799 | BFD_RELOC_CRIS_32_GD |
| 4800 | ENUMX |
| 4801 | BFD_RELOC_CRIS_DTP |
| 4802 | ENUMX |
| 4803 | BFD_RELOC_CRIS_32_DTPREL |
| 4804 | ENUMX |
| 4805 | BFD_RELOC_CRIS_16_DTPREL |
| 4806 | ENUMX |
| 4807 | BFD_RELOC_CRIS_32_GOT_TPREL |
| 4808 | ENUMX |
| 4809 | BFD_RELOC_CRIS_16_GOT_TPREL |
| 4810 | ENUMX |
| 4811 | BFD_RELOC_CRIS_32_TPREL |
| 4812 | ENUMX |
| 4813 | BFD_RELOC_CRIS_16_TPREL |
| 4814 | ENUMX |
| 4815 | BFD_RELOC_CRIS_DTPMOD |
| 4816 | ENUMX |
| 4817 | BFD_RELOC_CRIS_32_IE |
| 4818 | ENUMDOC |
| 4819 | Relocs used in TLS code for CRIS. |
| 4820 | |
| 4821 | ENUM |
| 4822 | BFD_RELOC_860_COPY |
| 4823 | ENUMX |
| 4824 | BFD_RELOC_860_GLOB_DAT |
| 4825 | ENUMX |
| 4826 | BFD_RELOC_860_JUMP_SLOT |
| 4827 | ENUMX |
| 4828 | BFD_RELOC_860_RELATIVE |
| 4829 | ENUMX |
| 4830 | BFD_RELOC_860_PC26 |
| 4831 | ENUMX |
| 4832 | BFD_RELOC_860_PLT26 |
| 4833 | ENUMX |
| 4834 | BFD_RELOC_860_PC16 |
| 4835 | ENUMX |
| 4836 | BFD_RELOC_860_LOW0 |
| 4837 | ENUMX |
| 4838 | BFD_RELOC_860_SPLIT0 |
| 4839 | ENUMX |
| 4840 | BFD_RELOC_860_LOW1 |
| 4841 | ENUMX |
| 4842 | BFD_RELOC_860_SPLIT1 |
| 4843 | ENUMX |
| 4844 | BFD_RELOC_860_LOW2 |
| 4845 | ENUMX |
| 4846 | BFD_RELOC_860_SPLIT2 |
| 4847 | ENUMX |
| 4848 | BFD_RELOC_860_LOW3 |
| 4849 | ENUMX |
| 4850 | BFD_RELOC_860_LOGOT0 |
| 4851 | ENUMX |
| 4852 | BFD_RELOC_860_SPGOT0 |
| 4853 | ENUMX |
| 4854 | BFD_RELOC_860_LOGOT1 |
| 4855 | ENUMX |
| 4856 | BFD_RELOC_860_SPGOT1 |
| 4857 | ENUMX |
| 4858 | BFD_RELOC_860_LOGOTOFF0 |
| 4859 | ENUMX |
| 4860 | BFD_RELOC_860_SPGOTOFF0 |
| 4861 | ENUMX |
| 4862 | BFD_RELOC_860_LOGOTOFF1 |
| 4863 | ENUMX |
| 4864 | BFD_RELOC_860_SPGOTOFF1 |
| 4865 | ENUMX |
| 4866 | BFD_RELOC_860_LOGOTOFF2 |
| 4867 | ENUMX |
| 4868 | BFD_RELOC_860_LOGOTOFF3 |
| 4869 | ENUMX |
| 4870 | BFD_RELOC_860_LOPC |
| 4871 | ENUMX |
| 4872 | BFD_RELOC_860_HIGHADJ |
| 4873 | ENUMX |
| 4874 | BFD_RELOC_860_HAGOT |
| 4875 | ENUMX |
| 4876 | BFD_RELOC_860_HAGOTOFF |
| 4877 | ENUMX |
| 4878 | BFD_RELOC_860_HAPC |
| 4879 | ENUMX |
| 4880 | BFD_RELOC_860_HIGH |
| 4881 | ENUMX |
| 4882 | BFD_RELOC_860_HIGOT |
| 4883 | ENUMX |
| 4884 | BFD_RELOC_860_HIGOTOFF |
| 4885 | ENUMDOC |
| 4886 | Intel i860 Relocations. |
| 4887 | |
| 4888 | ENUM |
| 4889 | BFD_RELOC_OPENRISC_ABS_26 |
| 4890 | ENUMX |
| 4891 | BFD_RELOC_OPENRISC_REL_26 |
| 4892 | ENUMDOC |
| 4893 | OpenRISC Relocations. |
| 4894 | |
| 4895 | ENUM |
| 4896 | BFD_RELOC_H8_DIR16A8 |
| 4897 | ENUMX |
| 4898 | BFD_RELOC_H8_DIR16R8 |
| 4899 | ENUMX |
| 4900 | BFD_RELOC_H8_DIR24A8 |
| 4901 | ENUMX |
| 4902 | BFD_RELOC_H8_DIR24R8 |
| 4903 | ENUMX |
| 4904 | BFD_RELOC_H8_DIR32A16 |
| 4905 | ENUMDOC |
| 4906 | H8 elf Relocations. |
| 4907 | |
| 4908 | ENUM |
| 4909 | BFD_RELOC_XSTORMY16_REL_12 |
| 4910 | ENUMX |
| 4911 | BFD_RELOC_XSTORMY16_12 |
| 4912 | ENUMX |
| 4913 | BFD_RELOC_XSTORMY16_24 |
| 4914 | ENUMX |
| 4915 | BFD_RELOC_XSTORMY16_FPTR16 |
| 4916 | ENUMDOC |
| 4917 | Sony Xstormy16 Relocations. |
| 4918 | |
| 4919 | ENUM |
| 4920 | BFD_RELOC_RELC |
| 4921 | ENUMDOC |
| 4922 | Self-describing complex relocations. |
| 4923 | COMMENT |
| 4924 | |
| 4925 | ENUM |
| 4926 | BFD_RELOC_XC16X_PAG |
| 4927 | ENUMX |
| 4928 | BFD_RELOC_XC16X_POF |
| 4929 | ENUMX |
| 4930 | BFD_RELOC_XC16X_SEG |
| 4931 | ENUMX |
| 4932 | BFD_RELOC_XC16X_SOF |
| 4933 | ENUMDOC |
| 4934 | Infineon Relocations. |
| 4935 | |
| 4936 | ENUM |
| 4937 | BFD_RELOC_VAX_GLOB_DAT |
| 4938 | ENUMX |
| 4939 | BFD_RELOC_VAX_JMP_SLOT |
| 4940 | ENUMX |
| 4941 | BFD_RELOC_VAX_RELATIVE |
| 4942 | ENUMDOC |
| 4943 | Relocations used by VAX ELF. |
| 4944 | |
| 4945 | ENUM |
| 4946 | BFD_RELOC_MT_PC16 |
| 4947 | ENUMDOC |
| 4948 | Morpho MT - 16 bit immediate relocation. |
| 4949 | ENUM |
| 4950 | BFD_RELOC_MT_HI16 |
| 4951 | ENUMDOC |
| 4952 | Morpho MT - Hi 16 bits of an address. |
| 4953 | ENUM |
| 4954 | BFD_RELOC_MT_LO16 |
| 4955 | ENUMDOC |
| 4956 | Morpho MT - Low 16 bits of an address. |
| 4957 | ENUM |
| 4958 | BFD_RELOC_MT_GNU_VTINHERIT |
| 4959 | ENUMDOC |
| 4960 | Morpho MT - Used to tell the linker which vtable entries are used. |
| 4961 | ENUM |
| 4962 | BFD_RELOC_MT_GNU_VTENTRY |
| 4963 | ENUMDOC |
| 4964 | Morpho MT - Used to tell the linker which vtable entries are used. |
| 4965 | ENUM |
| 4966 | BFD_RELOC_MT_PCINSN8 |
| 4967 | ENUMDOC |
| 4968 | Morpho MT - 8 bit immediate relocation. |
| 4969 | |
| 4970 | ENUM |
| 4971 | BFD_RELOC_MSP430_10_PCREL |
| 4972 | ENUMX |
| 4973 | BFD_RELOC_MSP430_16_PCREL |
| 4974 | ENUMX |
| 4975 | BFD_RELOC_MSP430_16 |
| 4976 | ENUMX |
| 4977 | BFD_RELOC_MSP430_16_PCREL_BYTE |
| 4978 | ENUMX |
| 4979 | BFD_RELOC_MSP430_16_BYTE |
| 4980 | ENUMX |
| 4981 | BFD_RELOC_MSP430_2X_PCREL |
| 4982 | ENUMX |
| 4983 | BFD_RELOC_MSP430_RL_PCREL |
| 4984 | ENUMDOC |
| 4985 | msp430 specific relocation codes |
| 4986 | |
| 4987 | ENUM |
| 4988 | BFD_RELOC_IQ2000_OFFSET_16 |
| 4989 | ENUMX |
| 4990 | BFD_RELOC_IQ2000_OFFSET_21 |
| 4991 | ENUMX |
| 4992 | BFD_RELOC_IQ2000_UHI16 |
| 4993 | ENUMDOC |
| 4994 | IQ2000 Relocations. |
| 4995 | |
| 4996 | ENUM |
| 4997 | BFD_RELOC_XTENSA_RTLD |
| 4998 | ENUMDOC |
| 4999 | Special Xtensa relocation used only by PLT entries in ELF shared |
| 5000 | objects to indicate that the runtime linker should set the value |
| 5001 | to one of its own internal functions or data structures. |
| 5002 | ENUM |
| 5003 | BFD_RELOC_XTENSA_GLOB_DAT |
| 5004 | ENUMX |
| 5005 | BFD_RELOC_XTENSA_JMP_SLOT |
| 5006 | ENUMX |
| 5007 | BFD_RELOC_XTENSA_RELATIVE |
| 5008 | ENUMDOC |
| 5009 | Xtensa relocations for ELF shared objects. |
| 5010 | ENUM |
| 5011 | BFD_RELOC_XTENSA_PLT |
| 5012 | ENUMDOC |
| 5013 | Xtensa relocation used in ELF object files for symbols that may require |
| 5014 | PLT entries. Otherwise, this is just a generic 32-bit relocation. |
| 5015 | ENUM |
| 5016 | BFD_RELOC_XTENSA_DIFF8 |
| 5017 | ENUMX |
| 5018 | BFD_RELOC_XTENSA_DIFF16 |
| 5019 | ENUMX |
| 5020 | BFD_RELOC_XTENSA_DIFF32 |
| 5021 | ENUMDOC |
| 5022 | Xtensa relocations to mark the difference of two local symbols. |
| 5023 | These are only needed to support linker relaxation and can be ignored |
| 5024 | when not relaxing. The field is set to the value of the difference |
| 5025 | assuming no relaxation. The relocation encodes the position of the |
| 5026 | first symbol so the linker can determine whether to adjust the field |
| 5027 | value. |
| 5028 | ENUM |
| 5029 | BFD_RELOC_XTENSA_SLOT0_OP |
| 5030 | ENUMX |
| 5031 | BFD_RELOC_XTENSA_SLOT1_OP |
| 5032 | ENUMX |
| 5033 | BFD_RELOC_XTENSA_SLOT2_OP |
| 5034 | ENUMX |
| 5035 | BFD_RELOC_XTENSA_SLOT3_OP |
| 5036 | ENUMX |
| 5037 | BFD_RELOC_XTENSA_SLOT4_OP |
| 5038 | ENUMX |
| 5039 | BFD_RELOC_XTENSA_SLOT5_OP |
| 5040 | ENUMX |
| 5041 | BFD_RELOC_XTENSA_SLOT6_OP |
| 5042 | ENUMX |
| 5043 | BFD_RELOC_XTENSA_SLOT7_OP |
| 5044 | ENUMX |
| 5045 | BFD_RELOC_XTENSA_SLOT8_OP |
| 5046 | ENUMX |
| 5047 | BFD_RELOC_XTENSA_SLOT9_OP |
| 5048 | ENUMX |
| 5049 | BFD_RELOC_XTENSA_SLOT10_OP |
| 5050 | ENUMX |
| 5051 | BFD_RELOC_XTENSA_SLOT11_OP |
| 5052 | ENUMX |
| 5053 | BFD_RELOC_XTENSA_SLOT12_OP |
| 5054 | ENUMX |
| 5055 | BFD_RELOC_XTENSA_SLOT13_OP |
| 5056 | ENUMX |
| 5057 | BFD_RELOC_XTENSA_SLOT14_OP |
| 5058 | ENUMDOC |
| 5059 | Generic Xtensa relocations for instruction operands. Only the slot |
| 5060 | number is encoded in the relocation. The relocation applies to the |
| 5061 | last PC-relative immediate operand, or if there are no PC-relative |
| 5062 | immediates, to the last immediate operand. |
| 5063 | ENUM |
| 5064 | BFD_RELOC_XTENSA_SLOT0_ALT |
| 5065 | ENUMX |
| 5066 | BFD_RELOC_XTENSA_SLOT1_ALT |
| 5067 | ENUMX |
| 5068 | BFD_RELOC_XTENSA_SLOT2_ALT |
| 5069 | ENUMX |
| 5070 | BFD_RELOC_XTENSA_SLOT3_ALT |
| 5071 | ENUMX |
| 5072 | BFD_RELOC_XTENSA_SLOT4_ALT |
| 5073 | ENUMX |
| 5074 | BFD_RELOC_XTENSA_SLOT5_ALT |
| 5075 | ENUMX |
| 5076 | BFD_RELOC_XTENSA_SLOT6_ALT |
| 5077 | ENUMX |
| 5078 | BFD_RELOC_XTENSA_SLOT7_ALT |
| 5079 | ENUMX |
| 5080 | BFD_RELOC_XTENSA_SLOT8_ALT |
| 5081 | ENUMX |
| 5082 | BFD_RELOC_XTENSA_SLOT9_ALT |
| 5083 | ENUMX |
| 5084 | BFD_RELOC_XTENSA_SLOT10_ALT |
| 5085 | ENUMX |
| 5086 | BFD_RELOC_XTENSA_SLOT11_ALT |
| 5087 | ENUMX |
| 5088 | BFD_RELOC_XTENSA_SLOT12_ALT |
| 5089 | ENUMX |
| 5090 | BFD_RELOC_XTENSA_SLOT13_ALT |
| 5091 | ENUMX |
| 5092 | BFD_RELOC_XTENSA_SLOT14_ALT |
| 5093 | ENUMDOC |
| 5094 | Alternate Xtensa relocations. Only the slot is encoded in the |
| 5095 | relocation. The meaning of these relocations is opcode-specific. |
| 5096 | ENUM |
| 5097 | BFD_RELOC_XTENSA_OP0 |
| 5098 | ENUMX |
| 5099 | BFD_RELOC_XTENSA_OP1 |
| 5100 | ENUMX |
| 5101 | BFD_RELOC_XTENSA_OP2 |
| 5102 | ENUMDOC |
| 5103 | Xtensa relocations for backward compatibility. These have all been |
| 5104 | replaced by BFD_RELOC_XTENSA_SLOT0_OP. |
| 5105 | ENUM |
| 5106 | BFD_RELOC_XTENSA_ASM_EXPAND |
| 5107 | ENUMDOC |
| 5108 | Xtensa relocation to mark that the assembler expanded the |
| 5109 | instructions from an original target. The expansion size is |
| 5110 | encoded in the reloc size. |
| 5111 | ENUM |
| 5112 | BFD_RELOC_XTENSA_ASM_SIMPLIFY |
| 5113 | ENUMDOC |
| 5114 | Xtensa relocation to mark that the linker should simplify |
| 5115 | assembler-expanded instructions. This is commonly used |
| 5116 | internally by the linker after analysis of a |
| 5117 | BFD_RELOC_XTENSA_ASM_EXPAND. |
| 5118 | ENUM |
| 5119 | BFD_RELOC_XTENSA_TLSDESC_FN |
| 5120 | ENUMX |
| 5121 | BFD_RELOC_XTENSA_TLSDESC_ARG |
| 5122 | ENUMX |
| 5123 | BFD_RELOC_XTENSA_TLS_DTPOFF |
| 5124 | ENUMX |
| 5125 | BFD_RELOC_XTENSA_TLS_TPOFF |
| 5126 | ENUMX |
| 5127 | BFD_RELOC_XTENSA_TLS_FUNC |
| 5128 | ENUMX |
| 5129 | BFD_RELOC_XTENSA_TLS_ARG |
| 5130 | ENUMX |
| 5131 | BFD_RELOC_XTENSA_TLS_CALL |
| 5132 | ENUMDOC |
| 5133 | Xtensa TLS relocations. |
| 5134 | |
| 5135 | ENUM |
| 5136 | BFD_RELOC_Z80_DISP8 |
| 5137 | ENUMDOC |
| 5138 | 8 bit signed offset in (ix+d) or (iy+d). |
| 5139 | |
| 5140 | ENUM |
| 5141 | BFD_RELOC_Z8K_DISP7 |
| 5142 | ENUMDOC |
| 5143 | DJNZ offset. |
| 5144 | ENUM |
| 5145 | BFD_RELOC_Z8K_CALLR |
| 5146 | ENUMDOC |
| 5147 | CALR offset. |
| 5148 | ENUM |
| 5149 | BFD_RELOC_Z8K_IMM4L |
| 5150 | ENUMDOC |
| 5151 | 4 bit value. |
| 5152 | |
| 5153 | ENUM |
| 5154 | BFD_RELOC_LM32_CALL |
| 5155 | ENUMX |
| 5156 | BFD_RELOC_LM32_BRANCH |
| 5157 | ENUMX |
| 5158 | BFD_RELOC_LM32_16_GOT |
| 5159 | ENUMX |
| 5160 | BFD_RELOC_LM32_GOTOFF_HI16 |
| 5161 | ENUMX |
| 5162 | BFD_RELOC_LM32_GOTOFF_LO16 |
| 5163 | ENUMX |
| 5164 | BFD_RELOC_LM32_COPY |
| 5165 | ENUMX |
| 5166 | BFD_RELOC_LM32_GLOB_DAT |
| 5167 | ENUMX |
| 5168 | BFD_RELOC_LM32_JMP_SLOT |
| 5169 | ENUMX |
| 5170 | BFD_RELOC_LM32_RELATIVE |
| 5171 | ENUMDOC |
| 5172 | Lattice Mico32 relocations. |
| 5173 | |
| 5174 | ENDSENUM |
| 5175 | BFD_RELOC_UNUSED |
| 5176 | CODE_FRAGMENT |
| 5177 | . |
| 5178 | .typedef enum bfd_reloc_code_real bfd_reloc_code_real_type; |
| 5179 | */ |
| 5180 | |
| 5181 | /* |
| 5182 | FUNCTION |
| 5183 | bfd_reloc_type_lookup |
| 5184 | bfd_reloc_name_lookup |
| 5185 | |
| 5186 | SYNOPSIS |
| 5187 | reloc_howto_type *bfd_reloc_type_lookup |
| 5188 | (bfd *abfd, bfd_reloc_code_real_type code); |
| 5189 | reloc_howto_type *bfd_reloc_name_lookup |
| 5190 | (bfd *abfd, const char *reloc_name); |
| 5191 | |
| 5192 | DESCRIPTION |
| 5193 | Return a pointer to a howto structure which, when |
| 5194 | invoked, will perform the relocation @var{code} on data from the |
| 5195 | architecture noted. |
| 5196 | |
| 5197 | */ |
| 5198 | |
| 5199 | reloc_howto_type * |
| 5200 | bfd_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code) |
| 5201 | { |
| 5202 | return BFD_SEND (abfd, reloc_type_lookup, (abfd, code)); |
| 5203 | } |
| 5204 | |
| 5205 | reloc_howto_type * |
| 5206 | bfd_reloc_name_lookup (bfd *abfd, const char *reloc_name) |
| 5207 | { |
| 5208 | return BFD_SEND (abfd, reloc_name_lookup, (abfd, reloc_name)); |
| 5209 | } |
| 5210 | |
| 5211 | static reloc_howto_type bfd_howto_32 = |
| 5212 | HOWTO (0, 00, 2, 32, FALSE, 0, complain_overflow_dont, 0, "VRT32", FALSE, 0xffffffff, 0xffffffff, TRUE); |
| 5213 | |
| 5214 | /* |
| 5215 | INTERNAL_FUNCTION |
| 5216 | bfd_default_reloc_type_lookup |
| 5217 | |
| 5218 | SYNOPSIS |
| 5219 | reloc_howto_type *bfd_default_reloc_type_lookup |
| 5220 | (bfd *abfd, bfd_reloc_code_real_type code); |
| 5221 | |
| 5222 | DESCRIPTION |
| 5223 | Provides a default relocation lookup routine for any architecture. |
| 5224 | |
| 5225 | */ |
| 5226 | |
| 5227 | reloc_howto_type * |
| 5228 | bfd_default_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code) |
| 5229 | { |
| 5230 | switch (code) |
| 5231 | { |
| 5232 | case BFD_RELOC_CTOR: |
| 5233 | /* The type of reloc used in a ctor, which will be as wide as the |
| 5234 | address - so either a 64, 32, or 16 bitter. */ |
| 5235 | switch (bfd_get_arch_info (abfd)->bits_per_address) |
| 5236 | { |
| 5237 | case 64: |
| 5238 | BFD_FAIL (); |
| 5239 | case 32: |
| 5240 | return &bfd_howto_32; |
| 5241 | case 16: |
| 5242 | BFD_FAIL (); |
| 5243 | default: |
| 5244 | BFD_FAIL (); |
| 5245 | } |
| 5246 | default: |
| 5247 | BFD_FAIL (); |
| 5248 | } |
| 5249 | return NULL; |
| 5250 | } |
| 5251 | |
| 5252 | /* |
| 5253 | FUNCTION |
| 5254 | bfd_get_reloc_code_name |
| 5255 | |
| 5256 | SYNOPSIS |
| 5257 | const char *bfd_get_reloc_code_name (bfd_reloc_code_real_type code); |
| 5258 | |
| 5259 | DESCRIPTION |
| 5260 | Provides a printable name for the supplied relocation code. |
| 5261 | Useful mainly for printing error messages. |
| 5262 | */ |
| 5263 | |
| 5264 | const char * |
| 5265 | bfd_get_reloc_code_name (bfd_reloc_code_real_type code) |
| 5266 | { |
| 5267 | if (code > BFD_RELOC_UNUSED) |
| 5268 | return 0; |
| 5269 | return bfd_reloc_code_real_names[code]; |
| 5270 | } |
| 5271 | |
| 5272 | /* |
| 5273 | INTERNAL_FUNCTION |
| 5274 | bfd_generic_relax_section |
| 5275 | |
| 5276 | SYNOPSIS |
| 5277 | bfd_boolean bfd_generic_relax_section |
| 5278 | (bfd *abfd, |
| 5279 | asection *section, |
| 5280 | struct bfd_link_info *, |
| 5281 | bfd_boolean *); |
| 5282 | |
| 5283 | DESCRIPTION |
| 5284 | Provides default handling for relaxing for back ends which |
| 5285 | don't do relaxing. |
| 5286 | */ |
| 5287 | |
| 5288 | bfd_boolean |
| 5289 | bfd_generic_relax_section (bfd *abfd ATTRIBUTE_UNUSED, |
| 5290 | asection *section ATTRIBUTE_UNUSED, |
| 5291 | struct bfd_link_info *link_info ATTRIBUTE_UNUSED, |
| 5292 | bfd_boolean *again) |
| 5293 | { |
| 5294 | *again = FALSE; |
| 5295 | return TRUE; |
| 5296 | } |
| 5297 | |
| 5298 | /* |
| 5299 | INTERNAL_FUNCTION |
| 5300 | bfd_generic_gc_sections |
| 5301 | |
| 5302 | SYNOPSIS |
| 5303 | bfd_boolean bfd_generic_gc_sections |
| 5304 | (bfd *, struct bfd_link_info *); |
| 5305 | |
| 5306 | DESCRIPTION |
| 5307 | Provides default handling for relaxing for back ends which |
| 5308 | don't do section gc -- i.e., does nothing. |
| 5309 | */ |
| 5310 | |
| 5311 | bfd_boolean |
| 5312 | bfd_generic_gc_sections (bfd *abfd ATTRIBUTE_UNUSED, |
| 5313 | struct bfd_link_info *info ATTRIBUTE_UNUSED) |
| 5314 | { |
| 5315 | return TRUE; |
| 5316 | } |
| 5317 | |
| 5318 | /* |
| 5319 | INTERNAL_FUNCTION |
| 5320 | bfd_generic_merge_sections |
| 5321 | |
| 5322 | SYNOPSIS |
| 5323 | bfd_boolean bfd_generic_merge_sections |
| 5324 | (bfd *, struct bfd_link_info *); |
| 5325 | |
| 5326 | DESCRIPTION |
| 5327 | Provides default handling for SEC_MERGE section merging for back ends |
| 5328 | which don't have SEC_MERGE support -- i.e., does nothing. |
| 5329 | */ |
| 5330 | |
| 5331 | bfd_boolean |
| 5332 | bfd_generic_merge_sections (bfd *abfd ATTRIBUTE_UNUSED, |
| 5333 | struct bfd_link_info *link_info ATTRIBUTE_UNUSED) |
| 5334 | { |
| 5335 | return TRUE; |
| 5336 | } |
| 5337 | |
| 5338 | /* |
| 5339 | INTERNAL_FUNCTION |
| 5340 | bfd_generic_get_relocated_section_contents |
| 5341 | |
| 5342 | SYNOPSIS |
| 5343 | bfd_byte *bfd_generic_get_relocated_section_contents |
| 5344 | (bfd *abfd, |
| 5345 | struct bfd_link_info *link_info, |
| 5346 | struct bfd_link_order *link_order, |
| 5347 | bfd_byte *data, |
| 5348 | bfd_boolean relocatable, |
| 5349 | asymbol **symbols); |
| 5350 | |
| 5351 | DESCRIPTION |
| 5352 | Provides default handling of relocation effort for back ends |
| 5353 | which can't be bothered to do it efficiently. |
| 5354 | |
| 5355 | */ |
| 5356 | |
| 5357 | bfd_byte * |
| 5358 | bfd_generic_get_relocated_section_contents (bfd *abfd, |
| 5359 | struct bfd_link_info *link_info, |
| 5360 | struct bfd_link_order *link_order, |
| 5361 | bfd_byte *data, |
| 5362 | bfd_boolean relocatable, |
| 5363 | asymbol **symbols) |
| 5364 | { |
| 5365 | bfd *input_bfd = link_order->u.indirect.section->owner; |
| 5366 | asection *input_section = link_order->u.indirect.section; |
| 5367 | long reloc_size; |
| 5368 | arelent **reloc_vector; |
| 5369 | long reloc_count; |
| 5370 | bfd_size_type sz; |
| 5371 | |
| 5372 | reloc_size = bfd_get_reloc_upper_bound (input_bfd, input_section); |
| 5373 | if (reloc_size < 0) |
| 5374 | return NULL; |
| 5375 | |
| 5376 | /* Read in the section. */ |
| 5377 | sz = input_section->rawsize ? input_section->rawsize : input_section->size; |
| 5378 | if (!bfd_get_section_contents (input_bfd, input_section, data, 0, sz)) |
| 5379 | return NULL; |
| 5380 | |
| 5381 | if (reloc_size == 0) |
| 5382 | return data; |
| 5383 | |
| 5384 | reloc_vector = bfd_malloc (reloc_size); |
| 5385 | if (reloc_vector == NULL) |
| 5386 | return NULL; |
| 5387 | |
| 5388 | reloc_count = bfd_canonicalize_reloc (input_bfd, |
| 5389 | input_section, |
| 5390 | reloc_vector, |
| 5391 | symbols); |
| 5392 | if (reloc_count < 0) |
| 5393 | goto error_return; |
| 5394 | |
| 5395 | if (reloc_count > 0) |
| 5396 | { |
| 5397 | arelent **parent; |
| 5398 | for (parent = reloc_vector; *parent != NULL; parent++) |
| 5399 | { |
| 5400 | char *error_message = NULL; |
| 5401 | asymbol *symbol; |
| 5402 | bfd_reloc_status_type r; |
| 5403 | |
| 5404 | symbol = *(*parent)->sym_ptr_ptr; |
| 5405 | if (symbol->section && elf_discarded_section (symbol->section)) |
| 5406 | { |
| 5407 | bfd_byte *p; |
| 5408 | static reloc_howto_type none_howto |
| 5409 | = HOWTO (0, 0, 0, 0, FALSE, 0, complain_overflow_dont, NULL, |
| 5410 | "unused", FALSE, 0, 0, FALSE); |
| 5411 | |
| 5412 | p = data + (*parent)->address * bfd_octets_per_byte (input_bfd); |
| 5413 | _bfd_clear_contents ((*parent)->howto, input_bfd, p); |
| 5414 | (*parent)->sym_ptr_ptr = bfd_abs_section.symbol_ptr_ptr; |
| 5415 | (*parent)->addend = 0; |
| 5416 | (*parent)->howto = &none_howto; |
| 5417 | r = bfd_reloc_ok; |
| 5418 | } |
| 5419 | else |
| 5420 | r = bfd_perform_relocation (input_bfd, |
| 5421 | *parent, |
| 5422 | data, |
| 5423 | input_section, |
| 5424 | relocatable ? abfd : NULL, |
| 5425 | &error_message); |
| 5426 | |
| 5427 | if (relocatable) |
| 5428 | { |
| 5429 | asection *os = input_section->output_section; |
| 5430 | |
| 5431 | /* A partial link, so keep the relocs. */ |
| 5432 | os->orelocation[os->reloc_count] = *parent; |
| 5433 | os->reloc_count++; |
| 5434 | } |
| 5435 | |
| 5436 | if (r != bfd_reloc_ok) |
| 5437 | { |
| 5438 | switch (r) |
| 5439 | { |
| 5440 | case bfd_reloc_undefined: |
| 5441 | if (!((*link_info->callbacks->undefined_symbol) |
| 5442 | (link_info, bfd_asymbol_name (*(*parent)->sym_ptr_ptr), |
| 5443 | input_bfd, input_section, (*parent)->address, |
| 5444 | TRUE))) |
| 5445 | goto error_return; |
| 5446 | break; |
| 5447 | case bfd_reloc_dangerous: |
| 5448 | BFD_ASSERT (error_message != NULL); |
| 5449 | if (!((*link_info->callbacks->reloc_dangerous) |
| 5450 | (link_info, error_message, input_bfd, input_section, |
| 5451 | (*parent)->address))) |
| 5452 | goto error_return; |
| 5453 | break; |
| 5454 | case bfd_reloc_overflow: |
| 5455 | if (!((*link_info->callbacks->reloc_overflow) |
| 5456 | (link_info, NULL, |
| 5457 | bfd_asymbol_name (*(*parent)->sym_ptr_ptr), |
| 5458 | (*parent)->howto->name, (*parent)->addend, |
| 5459 | input_bfd, input_section, (*parent)->address))) |
| 5460 | goto error_return; |
| 5461 | break; |
| 5462 | case bfd_reloc_outofrange: |
| 5463 | default: |
| 5464 | abort (); |
| 5465 | break; |
| 5466 | } |
| 5467 | |
| 5468 | } |
| 5469 | } |
| 5470 | } |
| 5471 | |
| 5472 | free (reloc_vector); |
| 5473 | return data; |
| 5474 | |
| 5475 | error_return: |
| 5476 | free (reloc_vector); |
| 5477 | return NULL; |
| 5478 | } |