[deliverable/binutils-gdb.git] / build-all.mk

#  Build all of the targets for any given host.....
#
#  This file is going to be ugly.  It will be VERY specific to the
#  Cygnus environment and build-process.
#
# Useful targets (rt = recursion target):
# (please correct or expand on this)
# FIXME: Might some of these be superfluous?
#
# all-emacs
# all-cygnus	- set up install directories, build 3stage native and all
#		supported cross targets, then check 3stage'd native
#		(rt = $(canonhost)-stamp-3stage-done, do-cygnus for cross)
# native	- set up install directories, build 3stage native
#		(rt = $(canonhost)-stamp-3stage-1)
# build-cygnus	- build 3stage native and all supported cross targets
#		(rt = $(canonhost)-stamp-3stage-done, build-cygnus for cross)
# build-latest	- build native and all supported cross targets
#		(rt = build-latest)
# all-native	- set up install directories, build native
#		(rt = do-native)
# all-cross	- set up install directories, build all targets
#		(rt = do-cygnus)
# config	- configure native and all supported cross targets
#		(rt = do1-config, do-native-config for cross)
# build		- build native and all supported cross targets
#		(rt = do1-build, build-native for cross)
# 3build	- build 3stage native and all supported cross targets
#		(rt = all, build-cygnus for cross)
# build-all-latest - build 3stage native and all supported cross targets
#		(rt = $(canonhost)-stamp-3stage-done, build-latest for cross)
# clean		- remove objdir directories, stamp files
#		(rt = clean)
#
# To configure/build for fewer targets, specify TARGETS="native cross1 ...".
  
TREE	= devo
include $(TREE)/release-info

TEST_INSTALL_DISK = /tug

INSTALLDIR = $(TEST_INSTALL_DISK)/$(TREE)-test/$(RELEASE_TAG)

ifndef host
host := $(shell $(TREE)/config.guess)
endif

NATIVE  = native

GCC	 = gcc -O 
CFLAGS	 = -g
CXXFLAGS = -g -O
MAKEINFOFLAGS =

log	= 1>$(canonhost)-build-log 2>&1
clog	= 1>$(canonhost)-check-log 2>&1
cyglog    = 1> $(canonhost)-x-$$i-cygnus-build-log 2>&1
latestlog = 1> $(canonhost)-x-$$i-latest-build-log 2>&1
natlog    = 1> $(canonhost)-x-$$i-native-build-log 2>&1

canonhost := $(shell $(TREE)/config.sub $(host))

# Convert config.guess results to a simpler form.
ifeq ($(canonhost),sparc-sun-solaris2.1)
canonhost := sparc-sun-solaris2
endif
ifeq ($(canonhost),sparc-sun-solaris2.3)
canonhost := sparc-sun-solaris2
endif
ifeq ($(canonhost),mips-dec-ultrix4.2)
canonhost := mips-dec-ultrix
endif
ifeq ($(canonhost),mips-sgi-irix4.0.1)
canonhost := mips-sgi-irix4
endif
ifeq ($(canonhost),mips-sgi-irix4.0.5H)
canonhost := mips-sgi-irix4
endif
ifeq ($(canonhost),rs6000-ibm-aix3.2)
canonhost := rs6000-ibm-aix
endif
ifeq ($(canonhost),i486-unknown-sco3.2v4.0)
canonhost := i386-sco3.2v4
endif
ifeq ($(canonhost),i386-unknown-sco3.2v4.0)
canonhost := i386-sco3.2v4
endif
ifeq ($(canonhost),i386-unknown-sco3.2v4)
canonhost := i386-sco3.2v4
endif
ifeq ($(canonhost),i386-unknown-go32)
canonhost := i386-go32
endif
ifeq ($(canonhost),i386-unknown-sysv4.2)
canonhost := i386-sysv4.2
endif
ifeq ($(canonhost),i386-lynx-lynxos)
canonhost := i386-lynxos
endif
ifeq ($(canonhost),m68k-lynx-lynxos)
canonhost := m68k-lynxos
endif

ifeq ($(canonhost),sparc-sun-sunos4.1.3)
TARGETS = $(NATIVE) \
	i386-go32 	\
	a29k-amd-udi 	\
	h8300-hms 	\
	i386-aout	\
	i386-lynx 	\
	i386-netware 	\
	i960-vxworks 	i960-intel-nindy \
	mips-idt-ecoff	\
	m68k-aout	m68k-vxworks 	m68k-coff \
	m68k-lynx 	\
	sh-hms 		\
	sparc-aout	sparc-vxworks	\
	sparclite-aout  sparclite-vxworks \
	z8k-coff
GCC = gcc -O -pipe
all: all-cygnus
endif

ifeq ($(canonhost),m68k-sun-sunos4.1.1)
TARGETS = $(NATIVE) \
	m68k-coff 
GCC = gcc -O -msoft-float
CC = cc -J
all: all-cygnus
endif

ifeq ($(canonhost),sparc-sun-solaris2)
TARGETS = $(NATIVE) \
	a29k-amd-udi \
	i960-vxworks \
	m68k-aout	m68k-coff \
	m88k-coff	\
	mipsel-idt-ecoff \
	sparclite-aout
CC = cc -Xs
GCC = gcc -O -pipe
all: all-cygnus
endif

ifeq ($(canonhost),mips-dec-ultrix)
TARGETS = $(NATIVE) m68k-aout
CC = cc -Wf,-XNg1000
all: all-cygnus
endif

ifeq ($(canonhost),mips-sgi-irix4)
TARGETS	= $(NATIVE) \
	mips-idt-ecoff	sh-hms
CC = cc -cckr -Wf,-XNg1500 -Wf,-XNk1000 -Wf,-XNh1500
all: all-cygnus
endif

ifeq ($(canonhost),rs6000-ibm-aix)
TARGETS	= $(NATIVE) \
	i960-vxworks \
	m68k-aout
all: all-cygnus
endif

ifeq ($(canonhost),m68k-hp-hpux)
TARGETS	= $(NATIVE)	m68k-aout
TMPDIR := $(shell mkdir $(canonhost)-tmpdir; cd $(canonhost)-tmpdir ; pwd)
CC = cc -Wp,-P 
#CFLAGS = +O1000 
CFLAGS = 
all: all-cygnus
endif

ifeq ($(canonhost),hppa1.1-hp-hpux)
TARGETS = \
	$(NATIVE) \
	i960-vxworks \
	m68k-aout	m68k-vxworks
CC = cc 
#CFLAGS = +Obb2000
CFLAGS = -g
all: all-native
endif

ifeq ($(canonhost),i386-sco3.2v4)
TARGETS = $(NATIVE) i386-aout
all: all-cygnus
endif

ifeq ($(canonhost),i386-go32)
TARGETS = \
	a29k-amd-udi \
	h8300-hms 	\
	i386-aout 	\
	m68k-aout	m68k-coff \
	mips-idt-ecoff 	\
	sh-hms 		\
	sparclite-aout
CC = i386-go32-gcc
GCC = i386-go32-gcc -O
CFLAGS =
CXXFLAGS = -O
MAKEINFOFLAGS = --no-split
all: all-cross
endif

ifeq ($(canonhost),i386-sysv4.2)
TARGETS = $(NATIVE) i386-netware
CC = cc
all: all-cygnus
endif

ifeq ($(canonhost),i386-lynxos)
TARGETS = $(NATIVE)
CC = /bin/gcc
all: all-cygnus
SHELL=/bin/bash
endif

ifeq ($(canonhost),m68k-lynxos)
TARGETS = $(NATIVE)
CC = /bin/gcc
all: all-cygnus
SHELL=/bin/bash
endif


FLAGS_TO_PASS := \
	"GCC=$(GCC)" \
	"CC=$(CC)" \
	"CFLAGS=$(CFLAGS)" \
	"CXXFLAGS=$(CXXFLAGS)" \
	"host=$(canonhost)" \
	"MAKEINFOFLAGS=$(MAKEINFOFLAGS)" \
	"RELEASE_TAG=$(RELEASE_TAG)" \
	"SHELL=$(SHELL)"

# set GNU_MAKE and CONFIG_SHELL correctly in sub-builds
ifeq ($(patsubst %-lynxos,lynxos,$(canonhost)),lynxos)
FLAGS_TO_PASS := $(FLAGS_TO_PASS) "GNU_MAKE=$(MAKE)" "CONFIG_SHELL=/bin/bash"
endif

all-emacs:
	@echo build started at `date`
	[ -d $(INSTALLDIR) ] || mkdir $(INSTALLDIR)
	-rm -f $(ROOTING)/$(RELEASE_TAG)
	ln -s $(INSTALLDIR) $(ROOTING)/$(RELEASE_TAG) 
	$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) do1 > $(canonhost)-emacs-native-log 2>&1 
	$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) do-latest > $(canonhost)-emacs-latest-log 2>&1 
	@echo done at `date`

all-cygnus:
	@echo build started at `date`
	[ -d $(INSTALLDIR) ] || mkdir $(INSTALLDIR)
	-rm -f $(ROOTING)/$(RELEASE_TAG) && ln -s $(INSTALLDIR) $(ROOTING)/$(RELEASE_TAG) 
	@for i in $(TARGETS) ; do \
	  if [ "$$i" = "native" ] ; then \
            if [ ! -f $(canonhost)-stamp-3stage-done ] ; then \
	      echo "3staging $(canonhost) native" ; \
	      $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) $(canonhost)-stamp-3stage-done $(log) && \
	         echo "     completed successfully" ; \
	    else \
	      true ; \
	    fi ; \
	  else \
	    echo "building $(canonhost) cross to $$i" ; \
            $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i do-cygnus $(cyglog) && \
	       echo "     completed successfully" ; \
	  fi ; \
	done
	@if [ ! -f $(canonhost)-stamp-3stage-checked ] ; then \
	  echo checking $(canonhost) native ; \
	  $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) $(canonhost)-check-3stage $(clog) ; \
	  touch $(canonhost)-stamp-3stage-checked ; \
	else \
	  true ; \
	fi
	@echo done at `date`

native:
	@echo build started at `date`
	[ -d $(INSTALLDIR) ] || mkdir $(INSTALLDIR)
	rm -f $(ROOTING)/$(RELEASE_TAG)
	ln -s $(INSTALLDIR) $(ROOTING)/$(RELEASE_TAG) 
	$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) $(canonhost)-stamp-3stage-done $(log)
	@echo done at `date`

build-cygnus:
	@echo build started at `date`
	@for i in $(TARGETS) ; do \
	  if [ "$$i" = "native" ] ; then \
            if [ ! -f $(canonhost)-3stage-done ] ; then \
	      echo "3staging $(canonhost) native" ; \
	      $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) $(canonhost)-stamp-3stage-done $(log) && \
	         echo "     completed successfully" ; \
	    fi ; \
	  else \
	    echo "building $(canonhost) cross to $$i:" `date` ; \
            $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i build-cygnus $(cyglog) && \
	       echo "     completed successfully" ; \
	  fi ; \
	done
	@echo done at `date`

build-latest:
	@echo build started at `date`
	@for i in $(TARGETS) ; do \
	  if [ "$$i" != "native" ] ; then \
	    echo "building $(canonhost) cross to $$i:" `date` ; \
	    $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i build-latest $(latestlog) && \
	       echo "     completed successfully" ; \
	  fi ; \
	done
	@echo done at `date`

all-native:
	[ -d $(INSTALLDIR) ] || mkdir $(INSTALLDIR)
	rm -f $(ROOTING)/$(RELEASE_TAG)
	ln -s $(INSTALLDIR) $(ROOTING)/$(RELEASE_TAG)
	@for i in $(TARGETS) ; do \
	    echo "building $(canonhost) cross to $$i" ; \
            $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i do-native $(natlog) && \
	       echo "     completed successfully" ; \
	done

all-cross:
	[ -d $(INSTALLDIR) ] || mkdir $(INSTALLDIR)
	rm -f $(ROOTING)/$(RELEASE_TAG)
	ln -s $(INSTALLDIR) $(ROOTING)/$(RELEASE_TAG)
	@for i in $(TARGETS) ; do \
	    echo "building $(canonhost) cross to $$i" ; \
            $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i build=$(build) do-cygnus $(cyglog) && \
	       echo "     completed successfully" ; \
	done

config:
	@for i in $(TARGETS) ; do \
	  if [ "$$i" = "native" ] ; then \
	    echo "config stage1 for $(canonhost)" ; \
	    $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) do1-config $(log) && \
	       echo "     completed successfully" ; \
	  else \
	    echo "config $(canonhost) cross to $$i" ; \
            $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i do-native-config $(cyglog) && \
	       echo "     completed successfully" ;  \
	  fi ; \
	done


build:
	@for i in $(TARGETS) ; do \
	  if [ "$$i" = "native" ] ; then \
	    $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) do1-build $(log) && \
	       echo "     completed successfully" ; \
	  else \
	    echo "building $(canonhost) cross to $$i" ; \
            $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i build-native $(natlog) && \
	       echo "     completed successfully" ; \
	  fi ; \
	done


3build:
	@for i in $(TARGETS) ; do \
	  if [ "$$i" = "native" ] ; then \
	    echo "building 3stage for $(canonhost)" ; \
	    $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) all $(log) && \
	       echo "     completed successfully" ; \
	  else \
	    echo "building $(canonhost) cross to $$i" ; \
            $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i build-cygnus $(cyglog) && \
	       echo "     completed successfully" ; \
	  fi ; \
	done

build-all-latest:
	@for i in $(TARGETS) ; do \
	  if [ "$$i" = "native" ] ; then \
	    echo "building 3stage for $(canonhost)" ; \
	    $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) $(canonhost)-stamp-3stage-done $(log) && \
	       echo "     completed successfully" ; \
	  else \
	    echo "building $(canonhost) cross to $$i" ; \
            $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i build-latest $(cyglog) && \
	       echo "     completed successfully" ; \
	  fi ; \
	done

clean:
	$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) clean $(log)

### Local Variables:
### fill-column: 131
### End:
Commit	Line	Data
	1	# Build all of the targets for any given host.....
	2	#
	3	# This file is going to be ugly. It will be VERY specific to the
	4	# Cygnus environment and build-process.
	5	#
	6	# Useful targets (rt = recursion target):
	7	# (please correct or expand on this)
	8	# FIXME: Might some of these be superfluous?
	9	#
	10	# all-emacs
	11	# all-cygnus - set up install directories, build 3stage native and all
	12	# supported cross targets, then check 3stage'd native
	13	# (rt = $(canonhost)-stamp-3stage-done, do-cygnus for cross)
	14	# native - set up install directories, build 3stage native
	15	# (rt = $(canonhost)-stamp-3stage-1)
	16	# build-cygnus - build 3stage native and all supported cross targets
	17	# (rt = $(canonhost)-stamp-3stage-done, build-cygnus for cross)
	18	# build-latest - build native and all supported cross targets
	19	# (rt = build-latest)
	20	# all-native - set up install directories, build native
	21	# (rt = do-native)
	22	# all-cross - set up install directories, build all targets
	23	# (rt = do-cygnus)
	24	# config - configure native and all supported cross targets
	25	# (rt = do1-config, do-native-config for cross)
	26	# build - build native and all supported cross targets
	27	# (rt = do1-build, build-native for cross)
	28	# 3build - build 3stage native and all supported cross targets
	29	# (rt = all, build-cygnus for cross)
	30	# build-all-latest - build 3stage native and all supported cross targets
	31	# (rt = $(canonhost)-stamp-3stage-done, build-latest for cross)
	32	# clean - remove objdir directories, stamp files
	33	# (rt = clean)
	34	#
	35	# To configure/build for fewer targets, specify TARGETS="native cross1 ...".
	36
	37	TREE = devo
	38	include $(TREE)/release-info
	39
	40	TEST_INSTALL_DISK = /tug
	41
	42	INSTALLDIR = $(TEST_INSTALL_DISK)/$(TREE)-test/$(RELEASE_TAG)
	43
	44	ifndef host
	45	host := $(shell $(TREE)/config.guess)
	46	endif
	47
	48	NATIVE = native
	49
	50	GCC = gcc -O
	51	CFLAGS = -g
	52	CXXFLAGS = -g -O
	53	MAKEINFOFLAGS =
	54
	55	log = 1>$(canonhost)-build-log 2>&1
	56	clog = 1>$(canonhost)-check-log 2>&1
	57	cyglog = 1> $(canonhost)-x-$$i-cygnus-build-log 2>&1
	58	latestlog = 1> $(canonhost)-x-$$i-latest-build-log 2>&1
	59	natlog = 1> $(canonhost)-x-$$i-native-build-log 2>&1
	60
	61	canonhost := $(shell $(TREE)/config.sub $(host))
	62
	63	# Convert config.guess results to a simpler form.
	64	ifeq ($(canonhost),sparc-sun-solaris2.1)
	65	canonhost := sparc-sun-solaris2
	66	endif
	67	ifeq ($(canonhost),sparc-sun-solaris2.3)
	68	canonhost := sparc-sun-solaris2
	69	endif
	70	ifeq ($(canonhost),mips-dec-ultrix4.2)
	71	canonhost := mips-dec-ultrix
	72	endif
	73	ifeq ($(canonhost),mips-sgi-irix4.0.1)
	74	canonhost := mips-sgi-irix4
	75	endif
	76	ifeq ($(canonhost),mips-sgi-irix4.0.5H)
	77	canonhost := mips-sgi-irix4
	78	endif
	79	ifeq ($(canonhost),rs6000-ibm-aix3.2)
	80	canonhost := rs6000-ibm-aix
	81	endif
	82	ifeq ($(canonhost),i486-unknown-sco3.2v4.0)
	83	canonhost := i386-sco3.2v4
	84	endif
	85	ifeq ($(canonhost),i386-unknown-sco3.2v4.0)
	86	canonhost := i386-sco3.2v4
	87	endif
	88	ifeq ($(canonhost),i386-unknown-sco3.2v4)
	89	canonhost := i386-sco3.2v4
	90	endif
	91	ifeq ($(canonhost),i386-unknown-go32)
	92	canonhost := i386-go32
	93	endif
	94	ifeq ($(canonhost),i386-unknown-sysv4.2)
	95	canonhost := i386-sysv4.2
	96	endif
	97	ifeq ($(canonhost),i386-lynx-lynxos)
	98	canonhost := i386-lynxos
	99	endif
	100	ifeq ($(canonhost),m68k-lynx-lynxos)
	101	canonhost := m68k-lynxos
	102	endif
	103
	104	ifeq ($(canonhost),sparc-sun-sunos4.1.3)
	105	TARGETS = $(NATIVE) \
	106	i386-go32 \
	107	a29k-amd-udi \
	108	h8300-hms \
	109	i386-aout \
	110	i386-lynx \
	111	i386-netware \
	112	i960-vxworks i960-intel-nindy \
	113	mips-idt-ecoff \
	114	m68k-aout m68k-vxworks m68k-coff \
	115	m68k-lynx \
	116	sh-hms \
	117	sparc-aout sparc-vxworks \
	118	sparclite-aout sparclite-vxworks \
	119	z8k-coff
	120	GCC = gcc -O -pipe
	121	all: all-cygnus
	122	endif
	123
	124	ifeq ($(canonhost),m68k-sun-sunos4.1.1)
	125	TARGETS = $(NATIVE) \
	126	m68k-coff
	127	GCC = gcc -O -msoft-float
	128	CC = cc -J
	129	all: all-cygnus
	130	endif
	131
	132	ifeq ($(canonhost),sparc-sun-solaris2)
	133	TARGETS = $(NATIVE) \
	134	a29k-amd-udi \
	135	i960-vxworks \
	136	m68k-aout m68k-coff \
	137	m88k-coff \
	138	mipsel-idt-ecoff \
	139	sparclite-aout
	140	CC = cc -Xs
	141	GCC = gcc -O -pipe
	142	all: all-cygnus
	143	endif
	144
	145	ifeq ($(canonhost),mips-dec-ultrix)
	146	TARGETS = $(NATIVE) m68k-aout
	147	CC = cc -Wf,-XNg1000
	148	all: all-cygnus
	149	endif
	150
	151	ifeq ($(canonhost),mips-sgi-irix4)
	152	TARGETS = $(NATIVE) \
	153	mips-idt-ecoff sh-hms
	154	CC = cc -cckr -Wf,-XNg1500 -Wf,-XNk1000 -Wf,-XNh1500
	155	all: all-cygnus
	156	endif
	157
	158	ifeq ($(canonhost),rs6000-ibm-aix)
	159	TARGETS = $(NATIVE) \
	160	i960-vxworks \
	161	m68k-aout
	162	all: all-cygnus
	163	endif
	164
	165	ifeq ($(canonhost),m68k-hp-hpux)
	166	TARGETS = $(NATIVE) m68k-aout
	167	TMPDIR := $(shell mkdir $(canonhost)-tmpdir; cd $(canonhost)-tmpdir ; pwd)
	168	CC = cc -Wp,-P
	169	#CFLAGS = +O1000
	170	CFLAGS =
	171	all: all-cygnus
	172	endif
	173
	174	ifeq ($(canonhost),hppa1.1-hp-hpux)
	175	TARGETS = \
	176	$(NATIVE) \
	177	i960-vxworks \
	178	m68k-aout m68k-vxworks
	179	CC = cc
	180	#CFLAGS = +Obb2000
	181	CFLAGS = -g
	182	all: all-native
	183	endif
	184
	185	ifeq ($(canonhost),i386-sco3.2v4)
	186	TARGETS = $(NATIVE) i386-aout
	187	all: all-cygnus
	188	endif
	189
	190	ifeq ($(canonhost),i386-go32)
	191	TARGETS = \
	192	a29k-amd-udi \
	193	h8300-hms \
	194	i386-aout \
	195	m68k-aout m68k-coff \
	196	mips-idt-ecoff \
	197	sh-hms \
	198	sparclite-aout
	199	CC = i386-go32-gcc
	200	GCC = i386-go32-gcc -O
	201	CFLAGS =
	202	CXXFLAGS = -O
	203	MAKEINFOFLAGS = --no-split
	204	all: all-cross
	205	endif
	206
	207	ifeq ($(canonhost),i386-sysv4.2)
	208	TARGETS = $(NATIVE) i386-netware
	209	CC = cc
	210	all: all-cygnus
	211	endif
	212
	213	ifeq ($(canonhost),i386-lynxos)
	214	TARGETS = $(NATIVE)
	215	CC = /bin/gcc
	216	all: all-cygnus
	217	SHELL=/bin/bash
	218	endif
	219
	220	ifeq ($(canonhost),m68k-lynxos)
	221	TARGETS = $(NATIVE)
	222	CC = /bin/gcc
	223	all: all-cygnus
	224	SHELL=/bin/bash
	225	endif
	226
	227
	228	FLAGS_TO_PASS := \
	229	"GCC=$(GCC)" \
	230	"CC=$(CC)" \
	231	"CFLAGS=$(CFLAGS)" \
	232	"CXXFLAGS=$(CXXFLAGS)" \
	233	"host=$(canonhost)" \
	234	"MAKEINFOFLAGS=$(MAKEINFOFLAGS)" \
	235	"RELEASE_TAG=$(RELEASE_TAG)" \
	236	"SHELL=$(SHELL)"
	237
	238	# set GNU_MAKE and CONFIG_SHELL correctly in sub-builds
	239	ifeq ($(patsubst %-lynxos,lynxos,$(canonhost)),lynxos)
	240	FLAGS_TO_PASS := $(FLAGS_TO_PASS) "GNU_MAKE=$(MAKE)" "CONFIG_SHELL=/bin/bash"
	241	endif
	242
	243	all-emacs:
	244	@echo build started at `date`
	245	[ -d $(INSTALLDIR) ] \|\| mkdir $(INSTALLDIR)
	246	-rm -f $(ROOTING)/$(RELEASE_TAG)
	247	ln -s $(INSTALLDIR) $(ROOTING)/$(RELEASE_TAG)
	248	$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) do1 > $(canonhost)-emacs-native-log 2>&1
	249	$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) do-latest > $(canonhost)-emacs-latest-log 2>&1
	250	@echo done at `date`
	251
	252	all-cygnus:
	253	@echo build started at `date`
	254	[ -d $(INSTALLDIR) ] \|\| mkdir $(INSTALLDIR)
	255	-rm -f $(ROOTING)/$(RELEASE_TAG) && ln -s $(INSTALLDIR) $(ROOTING)/$(RELEASE_TAG)
	256	@for i in $(TARGETS) ; do \
	257	if [ "$$i" = "native" ] ; then \
	258	if [ ! -f $(canonhost)-stamp-3stage-done ] ; then \
	259	echo "3staging $(canonhost) native" ; \
	260	$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) $(canonhost)-stamp-3stage-done $(log) && \
	261	echo " completed successfully" ; \
	262	else \
	263	true ; \
	264	fi ; \
	265	else \
	266	echo "building $(canonhost) cross to $$i" ; \
	267	$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i do-cygnus $(cyglog) && \
	268	echo " completed successfully" ; \
	269	fi ; \
	270	done
	271	@if [ ! -f $(canonhost)-stamp-3stage-checked ] ; then \
	272	echo checking $(canonhost) native ; \
	273	$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) $(canonhost)-check-3stage $(clog) ; \
	274	touch $(canonhost)-stamp-3stage-checked ; \
	275	else \
	276	true ; \
	277	fi
	278	@echo done at `date`
	279
	280	native:
	281	@echo build started at `date`
	282	[ -d $(INSTALLDIR) ] \|\| mkdir $(INSTALLDIR)
	283	rm -f $(ROOTING)/$(RELEASE_TAG)
	284	ln -s $(INSTALLDIR) $(ROOTING)/$(RELEASE_TAG)
	285	$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) $(canonhost)-stamp-3stage-done $(log)
	286	@echo done at `date`
	287
	288	build-cygnus:
	289	@echo build started at `date`
	290	@for i in $(TARGETS) ; do \
	291	if [ "$$i" = "native" ] ; then \
	292	if [ ! -f $(canonhost)-3stage-done ] ; then \
	293	echo "3staging $(canonhost) native" ; \
	294	$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) $(canonhost)-stamp-3stage-done $(log) && \
	295	echo " completed successfully" ; \
	296	fi ; \
	297	else \
	298	echo "building $(canonhost) cross to $$i:" `date` ; \
	299	$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i build-cygnus $(cyglog) && \
	300	echo " completed successfully" ; \
	301	fi ; \
	302	done
	303	@echo done at `date`
	304
	305	build-latest:
	306	@echo build started at `date`
	307	@for i in $(TARGETS) ; do \
	308	if [ "$$i" != "native" ] ; then \
	309	echo "building $(canonhost) cross to $$i:" `date` ; \
	310	$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i build-latest $(latestlog) && \
	311	echo " completed successfully" ; \
	312	fi ; \
	313	done
	314	@echo done at `date`
	315
	316	all-native:
	317	[ -d $(INSTALLDIR) ] \|\| mkdir $(INSTALLDIR)
	318	rm -f $(ROOTING)/$(RELEASE_TAG)
	319	ln -s $(INSTALLDIR) $(ROOTING)/$(RELEASE_TAG)
	320	@for i in $(TARGETS) ; do \
	321	echo "building $(canonhost) cross to $$i" ; \
	322	$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i do-native $(natlog) && \
	323	echo " completed successfully" ; \
	324	done
	325
	326	all-cross:
	327	[ -d $(INSTALLDIR) ] \|\| mkdir $(INSTALLDIR)
	328	rm -f $(ROOTING)/$(RELEASE_TAG)
	329	ln -s $(INSTALLDIR) $(ROOTING)/$(RELEASE_TAG)
	330	@for i in $(TARGETS) ; do \
	331	echo "building $(canonhost) cross to $$i" ; \
	332	$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i build=$(build) do-cygnus $(cyglog) && \
	333	echo " completed successfully" ; \
	334	done
	335
	336	config:
	337	@for i in $(TARGETS) ; do \
	338	if [ "$$i" = "native" ] ; then \
	339	echo "config stage1 for $(canonhost)" ; \
	340	$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) do1-config $(log) && \
	341	echo " completed successfully" ; \
	342	else \
	343	echo "config $(canonhost) cross to $$i" ; \
	344	$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i do-native-config $(cyglog) && \
	345	echo " completed successfully" ; \
	346	fi ; \
	347	done
	348
	349
	350	build:
	351	@for i in $(TARGETS) ; do \
	352	if [ "$$i" = "native" ] ; then \
	353	$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) do1-build $(log) && \
	354	echo " completed successfully" ; \
	355	else \
	356	echo "building $(canonhost) cross to $$i" ; \
	357	$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i build-native $(natlog) && \
	358	echo " completed successfully" ; \
	359	fi ; \
	360	done
	361
	362
	363	3build:
	364	@for i in $(TARGETS) ; do \
	365	if [ "$$i" = "native" ] ; then \
	366	echo "building 3stage for $(canonhost)" ; \
	367	$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) all $(log) && \
	368	echo " completed successfully" ; \
	369	else \
	370	echo "building $(canonhost) cross to $$i" ; \
	371	$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i build-cygnus $(cyglog) && \
	372	echo " completed successfully" ; \
	373	fi ; \
	374	done
	375
	376	build-all-latest:
	377	@for i in $(TARGETS) ; do \
	378	if [ "$$i" = "native" ] ; then \
	379	echo "building 3stage for $(canonhost)" ; \
	380	$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) $(canonhost)-stamp-3stage-done $(log) && \
	381	echo " completed successfully" ; \
	382	else \
	383	echo "building $(canonhost) cross to $$i" ; \
	384	$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i build-latest $(cyglog) && \
	385	echo " completed successfully" ; \
	386	fi ; \
	387	done
	388
	389	clean:
	390	$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) clean $(log)
	391
	392	### Local Variables:
	393	### fill-column: 131
	394	### End: