[deliverable/binutils-gdb.git] / build-all.mk

# Build all of the targets for any given host.....
#
# This file is going to be ugly.  It will be VERY specific to the
# Cygnus environment and build-process.
#
# Useful targets (rt = recursion target):
# (please correct or expand on this)
# FIXME: Might some of these be superfluous?
#
# all-emacs
# all-cygnus	- set up install directories, build 3stage native and all
#		supported cross targets, then check 3stage'd native
#		(rt = $(canonhost)-stamp-3stage-done, do-cygnus for cross)
# native	- set up install directories, build 3stage native
#		(rt = $(canonhost)-stamp-3stage-1)
# build-cygnus	- build 3stage native and all supported cross targets
#		(rt = $(canonhost)-stamp-3stage-done, build-cygnus for cross)
# build-latest	- build all supported cross targets
#		(rt = build-latest)
# all-native	- set up install directories, build native
#		(rt = do-native)
# all-cross	- set up install directories, build all targets
#		(rt = do-cygnus)
# config	- configure native and all supported cross targets
#		(rt = do1-config, do-native-config for cross)
# build		- build native and all supported cross targets
#		(rt = do1-build, build-native for cross)
# 3build	- build 3stage native and all supported cross targets
#		(rt = all, build-cygnus for cross)
# build-all-latest - build 3stage native and all supported cross targets
#		(rt = $(canonhost)-stamp-3stage-done, build-latest for cross)
# clean		- remove objdir directories, stamp files
#		(rt = clean)
#
# To configure/build for fewer targets, specify TARGETS="native cross1 ...".
  
TREE = devo
include $(TREE)/release-info

TEST_INSTALL_DISK = /dumbo

INSTALLDIR = $(TEST_INSTALL_DISK)/$(TREE)-test/$(RELEASE_TAG)

ifndef host
host := $(shell $(TREE)/config.guess)
endif

NATIVE  = native

GCC	 = gcc
CFLAGS	 = -g
GNUCFLAGS= -g -O2
CXXFLAGS = -g -O2
MAKEINFOFLAGS =

log	= 1>$(canonhost)-build-log 2>&1
clog	= 1>$(canonhost)-check-log 2>&1
cyglog    = 1> $(canonhost)-x-$$i-cygnus-build-log 2>&1
latestlog = 1> $(canonhost)-x-$$i-latest-build-log 2>&1
natlog    = 1> $(canonhost)-x-$$i-native-build-log 2>&1

canonhost := $(shell $(TREE)/config.sub $(host))

# Convert config.guess results to a simpler form.
ifeq ($(canonhost),sparc-sun-solaris2.1)
canonhost := sparc-sun-solaris2
endif
ifeq ($(canonhost),sparc-sun-solaris2.3)
canonhost := sparc-sun-solaris2
endif
ifeq ($(canonhost),mips-dec-ultrix4.2)
canonhost := mips-dec-ultrix
endif
ifeq ($(canonhost),mips-dec-ultrix4.4)
canonhost := mips-dec-ultrix
endif
ifeq ($(canonhost),mips-sgi-irix4.0.1)
canonhost := mips-sgi-irix4
endif
ifeq ($(canonhost),mips-sgi-irix4.0.5H)
canonhost := mips-sgi-irix4
endif
ifeq ($(canonhost),mips-sgi-irix5.2)
canonhost := mips-sgi-irix5
endif
ifeq ($(canonhost),rs6000-ibm-aix3.2)
canonhost := rs6000-ibm-aix
endif
ifeq ($(canonhost),i486-unknown-sco3.2v4.0)
canonhost := i386-sco3.2v4
endif
ifeq ($(canonhost),i386-unknown-sco3.2v4.0)
canonhost := i386-sco3.2v4
endif
ifeq ($(canonhost),i386-unknown-sco3.2v4)
canonhost := i386-sco3.2v4
endif
ifeq ($(canonhost),i386-unknown-go32)
canonhost := i386-go32
endif
ifeq ($(canonhost),i386-unknown-sysv4.2)
canonhost := i386-sysv4.2
endif
ifeq ($(canonhost),i386-lynx-lynxos)
canonhost := i386-lynx
endif
ifeq ($(canonhost),m68k-lynx-lynxos)
canonhost := m68k-lynx
endif
ifeq ($(canonhost),sparc-lynx-lynxos)
canonhost := sparc-lynx
endif
ifeq ($(canonhost),rs6000-lynx-lynxos)
canonhost := rs6000-lynx
endif
ifeq ($(canonhost),i386-unknown-linux)
canonhost := i386-linux
endif
ifeq ($(canonhost),i486-unknown-linux)
canonhost := i486-linux
endif
ifeq ($(canonhost),i586-unknown-linux)
canonhost := i486-linux
endif
ifeq ($(canonhost),i386-unknown-linuxaout)
canonhost := i386-linuxaout
endif
ifeq ($(canonhost),i486-unknown-linuxaout)
canonhost := i486-linuxaout
endif
ifeq ($(canonhost),i586-unknown-linuxaout)
canonhost := i486-linuxaout
endif

#
# The following TARGETS variable settings probably ought to
# be made automatically from the 
# /s1/cygnus/progressive/host-target-pairs.tbl file, using
# the /s1/cygnus/progressive/targets script.  But, be sure
# that the native is spelled 'native'.
#

ifeq ($(canonhost),sparc-sun-sunos4.1)
TARGETS = $(NATIVE) \
	i386-go32 \
	a29k-amd-udi a29k-vxworks5.1 \
	sh-hms h8300-hms \
	powerpc-eabi hppa1.1-hp-proelf \
	i386-aout i386-elf \
	i960-nindy-coff i960-vxworks5.0 i960-vxworks5.1 \
	m68k-aout m68k-coff m68k-elf m68k-vxworks5.1 \
	mips-elf mips-idt-ecoff mips64-elf \
	sparc-aout sparclite-aout sparclite-coff \
	z8k-coff i386-unixware mips-ncd-elf \
	OSE68000 OSE68k
GCC = gcc -O2 -pipe
all: all-cygnus
endif

ifeq ($(canonhost),sparc-sun-sunos4.1.3)
TARGETS = $(NATIVE) \
	i386-go32 	\
	a29k-amd-udi 	\
	h8300-hms 	h8500-hms \
	hppa1.1-hp-proelf \
	i386-aout	i386-elf \
	i960-nindy-coff	i960-vxworks5.0	i960-vxworks5.1 \
	m68k-aout	m68k-coff 	m68k-elf	m68k-vxworks5.1 \
	mips-idt-ecoff	mips64-elf	mips-elf \
	sh-hms 	\
	sparc-aout	sparc64-aout	sparc-vxworks \
	sparclite-aout  sparclite-coff	sparclite-vxworks \
	z8k-coff \
	OSE68000 OSE68k mips-ncd-elf i386-unixware
# The OSE68000 and OSE68k targets are for Ericsson only.
GCC = gcc -O2 -pipe
all: all-cygnus
endif

ifeq ($(canonhost),m68k-sun-sunos4.1.1)
TARGETS = $(NATIVE)
GCC = gcc -O2 -msoft-float
CC = cc -J
all: all-cygnus
endif

ifeq ($(canonhost),sparc-sun-solaris2)
TARGETS = $(NATIVE) \
	a29k-amd-udi \
	h8300-hms 	h8500-hms \
	hppa1.1-hp-proelf \
	i960-vxworks5.0 i960-vxworks5.1 \
	m68k-aout	m68k-coff 	m68k-vxworks5.1	m88k-coff \
	mips-idt-ecoff	mips-elf \
	sparc64-elf	sparclite-aout sparclite-coff \
	OSE68000 OSE68k \
	sparc-sun-sunos4.1.3
# The latter assures that BNR's special build (which they now
# do for themselves from sources) hasn't developed bit-rot.
# The OSE68000 and OSE68k targets are for Ericsson only.

CC = cc
GCC = gcc -O2 -pipe
all: all-cygnus
endif

ifeq ($(canonhost),mips-dec-ultrix)
TARGETS = $(NATIVE)
CC = cc -Wf,-XNg1000
all: all-cygnus
SHELL = /usr/unsupported/bin/bash
CONFIG_SHELL = /usr/unsupported/bin/bash
TMPDIR = $(shell mkdir $(canonhost)-tmpdir; cd $(canonhost)-tmpdir ; pwd)
endif

ifeq ($(patsubst alpha-dec-osf%,alpha,$(canonhost)),alpha)
TARGETS = $(NATIVE)
CC = cc
all: all-cygnus
endif

ifeq ($(canonhost),mips-sgi-irix4)
TARGETS	= $(NATIVE) \
	mips-idt-ecoff \
	mips-elf mips64-elf \
	sh-hms
CC = cc -cckr -Wf,-XNg1500 -Wf,-XNk1000 -Wf,-XNh2000
all: all-cygnus
endif

ifeq ($(canonhost),mips-sgi-irix5)
TARGETS	= $(NATIVE) \
	mips-idt-ecoff \
	mips-elf mips64-elf \
	sh-hms
CC = cc -cckr -Wf,-XNg1500 -Wf,-XNk1000 -Wf,-XNh2000
all: all-cygnus
endif

ifeq ($(canonhost),powerpc-ibm-aix4.1)
TARGETS	= $(NATIVE)
all: all-cygnus
endif

ifeq ($(canonhost),rs6000-ibm-aix)
TARGETS	= $(NATIVE) \
	i960-vxworks5.0 i960-vxworks5.1 \
	m68k-aout
all: all-cygnus
endif

ifeq ($(canonhost),rs6000-ibm-aix3.2.5)
TARGETS	= $(NATIVE) \
	i960-vxworks5.0 i960-vxworks5.1 \
	m68k-aout
all: all-cygnus
endif

ifeq ($(canonhost),rs6000-ibm-aix4.1)
TARGETS	= $(NATIVE)
all: all-cygnus
endif

ifeq ($(canonhost),m68k-hp-hpux9)
TARGETS	= $(NATIVE)
TMPDIR := $(shell mkdir $(canonhost)-tmpdir; cd $(canonhost)-tmpdir ; pwd)
CC = cc -Wp,-P,-H256000
#CFLAGS = +O1000 
CFLAGS = -g
all: all-cygnus
endif

ifeq ($(canonhost),hppa1.1-hp-hpux9)
TARGETS = \
	$(NATIVE) \
	h8300-hms \
	hppa1.1-hp-proelf \
	i960-vxworks5.0 i960-vxworks5.1 \
	m68k-aout  m68k-coff  m68k-vxworks5.1
CC = cc -Wp,-H256000
#CFLAGS = +Obb2000
CFLAGS = -g
all: all-cygnus
endif

#ifeq ($(canonhost),hppa1.1-hp-hpux10)
ifeq ($(patsubst hppa1.1-hp-hpux10%,hpux10,$(canonhost)),hpux10)
TARGETS = $(NATIVE)
CC = cc -Wp,-H256000
#CFLAGS = +Obb2000
CFLAGS = -g
all: all-cygnus
endif

ifeq ($(canonhost),i386-sco3.2v4)
TARGETS = $(NATIVE)
all: all-cygnus
endif

ifeq ($(canonhost),i386-go32)
TARGETS = \
	a29k-amd-udi \
	h8300-hms 	hppa1.1-hp-proelf \
	i386-aout 	\
	m68k-aout	m68k-coff \
	mips-elf	mips-idt-ecoff	mips64-elf \
	sh-hms 		\
	sparc-aout	sparclite-aout	sparclite-coff
CC = i386-go32-gcc
GCC = i386-go32-gcc -O2
CFLAGS =
CXXFLAGS = -O2
MAKEINFOFLAGS = --no-split
all: all-dos
endif

ifeq ($(canonhost),i386-sysv4.2)
TARGETS = $(NATIVE) i386-netware
CC = cc
all: all-cygnus
endif

ifeq ($(canonhost),i386-ncr-sysv4.3)
TARGETS = $(NATIVE)
CC = cc -Hnocopyr
SHELL = /usr/unsupported/bin/bash
CONFIG_SHELL = /usr/unsupported/bin/bash
all: all-cygnus
endif

ifeq ($(canonhost),i386-lynx)
TARGETS = $(NATIVE)
CC = /usr/cygnus/progressive/bin/gcc
all: all-cygnus
SHELL=/bin/bash
endif

ifeq ($(canonhost),m68k-lynx)
TARGETS = $(NATIVE)
CC = /usr/cygnus/progressive/bin/gcc
all: all-cygnus
SHELL=/bin/bash
endif

ifeq ($(canonhost),sparc-lynx)
TARGETS = $(NATIVE)
CC = /usr/cygnus/progressive/bin/gcc
all: all-cygnus
SHELL=/bin/bash
endif

ifeq ($(canonhost),rs6000-lynx)
TARGETS = $(NATIVE)
CC = /usr/cygnus/progressive/bin/gcc
all: all-cygnus
SHELL=/bin/bash
endif

ifeq ($(patsubst %-linux,linux,$(patsubst %-linuxaout,linux,$(canonhost))),linux)
TARGETS = $(NATIVE)
all: all-cygnus
endif

FLAGS_TO_PASS := \
	"GCC=$(GCC)" \
	"CC=$(CC)" \
	"CFLAGS=$(CFLAGS)" \
	"GNUCFLAGS=$(GNUCFLAGS)" \
	"CXXFLAGS=$(CXXFLAGS)" \
	"host=$(canonhost)" \
	"MAKEINFOFLAGS=$(MAKEINFOFLAGS)" \
	"RELEASE_TAG=$(RELEASE_TAG)" \
	"SHELL=$(SHELL)"

# set GNU_MAKE and CONFIG_SHELL correctly in sub-builds
ifeq ($(patsubst %-lynx,lynx,$(canonhost)),lynx)
FLAGS_TO_PASS := $(FLAGS_TO_PASS) "GNU_MAKE=$(MAKE)" "CONFIG_SHELL=/bin/bash"
endif

ifeq ($(patsubst %-linux,linux,$(patsubst %-linuxaout,linux,$(canonhost))),linux)
FLAGS_TO_PASS := $(FLAGS_TO_PASS) "GNU_MAKE=$(MAKE)"
endif

ifeq ($(patsubst %i386-ncr-sysv4.3,ncr,$(canonhost)),ncr)
FLAGS_TO_PASS := $(FLAGS_TO_PASS) "CONFIG_SHELL=/usr/unsupported/bin/bash"
endif

all-emacs:
	@echo build started at `date`
	test -d $(INSTALLDIR) || mkdir $(INSTALLDIR)
	-rm -f $(ROOTING)/$(RELEASE_TAG)
	ln -s $(INSTALLDIR) $(ROOTING)/$(RELEASE_TAG) 
	$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) do1 > $(canonhost)-emacs-native-log 2>&1 
	$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) do-latest > $(canonhost)-emacs-latest-log 2>&1 
	@echo done at `date`

all-cygnus:
	@echo build started at `date`
	test -d $(INSTALLDIR) || mkdir $(INSTALLDIR)
	-rm -f $(ROOTING)/$(RELEASE_TAG) && ln -s $(INSTALLDIR) $(ROOTING)/$(RELEASE_TAG) 
#
#      The following line to be used during regular progressive builds
#      to help developers test, but should be commented out for final
#      progressive build.
#
#      -rm -f $(ROOTING)/progressive-beta && ln -s $(RELEASE_TAG) $(ROOTING)/progresssive
	@for i in $(TARGETS) ; do \
	  if [ "$$i" = "native" ] ; then \
            if [ ! -f $(canonhost)-stamp-3stage-done ] ; then \
	      echo "3staging $(canonhost) native" ; \
	      echo Flags passed to make: $(FLAGS_TO_PASS) ; \
	      if $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) $(canonhost)-stamp-3stage-done $(log); then \
	        echo "     completed successfully" ; \
	      else \
		exit 1; \
	      fi; \
	    else \
	      true ; \
	    fi ; \
	  else \
	    echo "building $(canonhost) cross to $$i" ; \
            $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i do-cygnus $(cyglog) && \
	       echo "     completed successfully" ; \
	  fi ; \
	done
	@if [ ! -f $(canonhost)-stamp-3stage-checked ] ; then \
	  echo checking $(canonhost) native ; \
	  $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) $(canonhost)-check-3stage $(clog) ; \
	  touch $(canonhost)-stamp-3stage-checked ; \
	else \
	  true ; \
	fi
	@echo done at `date`

native:
	@echo build started at `date`
	test -d $(INSTALLDIR) || mkdir $(INSTALLDIR)
	-rm -f $(ROOTING)/$(RELEASE_TAG) && ln -s $(INSTALLDIR) $(ROOTING)/$(RELEASE_TAG)
#	-rm -f $(ROOTING)/progressive-beta && ln -s $(RELEASE_TAG) $(ROOTING)/progressive-beta
	$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) $(canonhost)-stamp-3stage-done $(log)
	@echo done at `date`

build-cygnus:
	@echo build started at `date`
	@for i in $(TARGETS) ; do \
	  if [ "$$i" = "native" ] ; then \
            if [ ! -f $(canonhost)-3stage-done ] ; then \
	      echo "3staging $(canonhost) native" ; \
	      $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) $(canonhost)-stamp-3stage-done $(log) && \
	         echo "     completed successfully" ; \
	    fi ; \
	  else \
	    echo "building $(canonhost) cross to $$i:" `date` ; \
            $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i build-cygnus $(cyglog) && \
	       echo "     completed successfully" ; \
	  fi ; \
	done
	@echo done at `date`

build-latest:
	@echo build started at `date`
	@for i in $(TARGETS) ; do \
	  if [ "$$i" != "native" ] ; then \
	    echo "building $(canonhost) cross to $$i:" `date` ; \
	    $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i build-latest $(latestlog) && \
	       echo "     completed successfully" ; \
	  fi ; \
	done
	@echo done at `date`

all-native:
	test -d $(INSTALLDIR) || mkdir $(INSTALLDIR)
	rm -f $(ROOTING)/$(RELEASE_TAG)
	ln -s $(INSTALLDIR) $(ROOTING)/$(RELEASE_TAG)
	@for i in $(TARGETS) ; do \
	    echo "building $(canonhost) cross to $$i" ; \
            $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i do-native $(natlog) && \
	       echo "     completed successfully" ; \
	done

all-cross:
	test -d $(INSTALLDIR) || mkdir $(INSTALLDIR)
	rm -f $(ROOTING)/$(RELEASE_TAG)
	ln -s $(INSTALLDIR) $(ROOTING)/$(RELEASE_TAG)
	@for i in $(TARGETS) ; do \
	    echo "building $(canonhost) cross to $$i" ; \
            $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i build=$(build) do-cygnus $(cyglog) && \
	       echo "     completed successfully" ; \
	done

do-dos:
        $(MAKE) -f build-all.mk build=$(host) host=i386-go32 all-dos
all-dos:
        @for i in $(TARGETS) ; do \
            echo "building $(canonhost) cross to $$i" ; \
            $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) host=$(host) target=$$i do-dos $(cyglog) && \
               echo "     completed successfully at `date`" ; \
        done

config:
	@for i in $(TARGETS) ; do \
	  if [ "$$i" = "native" ] ; then \
	    echo "config stage1 for $(canonhost)" ; \
	    $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) do1-config $(log) && \
	       echo "     completed successfully" ; \
	  else \
	    echo "config $(canonhost) cross to $$i" ; \
            $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i do-native-config $(cyglog) && \
	       echo "     completed successfully" ;  \
	  fi ; \
	done


build:
	@for i in $(TARGETS) ; do \
	  if [ "$$i" = "native" ] ; then \
	    $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) do1-build $(log) && \
	       echo "     completed successfully" ; \
	  else \
	    echo "building $(canonhost) cross to $$i" ; \
            $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i build-native $(natlog) && \
	       echo "     completed successfully" ; \
	  fi ; \
	done


3build:
	@for i in $(TARGETS) ; do \
	  if [ "$$i" = "native" ] ; then \
	    echo "building 3stage for $(canonhost)" ; \
	    $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) all $(log) && \
	       echo "     completed successfully" ; \
	  else \
	    echo "building $(canonhost) cross to $$i" ; \
            $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i build-cygnus $(cyglog) && \
	       echo "     completed successfully" ; \
	  fi ; \
	done

build-all-latest:
	@for i in $(TARGETS) ; do \
	  if [ "$$i" = "native" ] ; then \
	    echo "building 3stage for $(canonhost)" ; \
	    $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) $(canonhost)-stamp-3stage-done $(log) && \
	       echo "     completed successfully" ; \
	  else \
	    echo "building $(canonhost) cross to $$i" ; \
            $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i build-latest $(cyglog) && \
	       echo "     completed successfully" ; \
	  fi ; \
	done

clean:
	$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) clean $(log)

### Local Variables:
### fill-column: 131
### End:
Commit	Line	Data
	1	# Build all of the targets for any given host.....
	2	#
	3	# This file is going to be ugly. It will be VERY specific to the
	4	# Cygnus environment and build-process.
	5	#
	6	# Useful targets (rt = recursion target):
	7	# (please correct or expand on this)
	8	# FIXME: Might some of these be superfluous?
	9	#
	10	# all-emacs
	11	# all-cygnus - set up install directories, build 3stage native and all
	12	# supported cross targets, then check 3stage'd native
	13	# (rt = $(canonhost)-stamp-3stage-done, do-cygnus for cross)
	14	# native - set up install directories, build 3stage native
	15	# (rt = $(canonhost)-stamp-3stage-1)
	16	# build-cygnus - build 3stage native and all supported cross targets
	17	# (rt = $(canonhost)-stamp-3stage-done, build-cygnus for cross)
	18	# build-latest - build all supported cross targets
	19	# (rt = build-latest)
	20	# all-native - set up install directories, build native
	21	# (rt = do-native)
	22	# all-cross - set up install directories, build all targets
	23	# (rt = do-cygnus)
	24	# config - configure native and all supported cross targets
	25	# (rt = do1-config, do-native-config for cross)
	26	# build - build native and all supported cross targets
	27	# (rt = do1-build, build-native for cross)
	28	# 3build - build 3stage native and all supported cross targets
	29	# (rt = all, build-cygnus for cross)
	30	# build-all-latest - build 3stage native and all supported cross targets
	31	# (rt = $(canonhost)-stamp-3stage-done, build-latest for cross)
	32	# clean - remove objdir directories, stamp files
	33	# (rt = clean)
	34	#
	35	# To configure/build for fewer targets, specify TARGETS="native cross1 ...".
	36
	37	TREE = devo
	38	include $(TREE)/release-info
	39
	40	TEST_INSTALL_DISK = /dumbo
	41
	42	INSTALLDIR = $(TEST_INSTALL_DISK)/$(TREE)-test/$(RELEASE_TAG)
	43
	44	ifndef host
	45	host := $(shell $(TREE)/config.guess)
	46	endif
	47
	48	NATIVE = native
	49
	50	GCC = gcc
	51	CFLAGS = -g
	52	GNUCFLAGS= -g -O2
	53	CXXFLAGS = -g -O2
	54	MAKEINFOFLAGS =
	55
	56	log = 1>$(canonhost)-build-log 2>&1
	57	clog = 1>$(canonhost)-check-log 2>&1
	58	cyglog = 1> $(canonhost)-x-$$i-cygnus-build-log 2>&1
	59	latestlog = 1> $(canonhost)-x-$$i-latest-build-log 2>&1
	60	natlog = 1> $(canonhost)-x-$$i-native-build-log 2>&1
	61
	62	canonhost := $(shell $(TREE)/config.sub $(host))
	63
	64	# Convert config.guess results to a simpler form.
	65	ifeq ($(canonhost),sparc-sun-solaris2.1)
	66	canonhost := sparc-sun-solaris2
	67	endif
	68	ifeq ($(canonhost),sparc-sun-solaris2.3)
	69	canonhost := sparc-sun-solaris2
	70	endif
	71	ifeq ($(canonhost),mips-dec-ultrix4.2)
	72	canonhost := mips-dec-ultrix
	73	endif
	74	ifeq ($(canonhost),mips-dec-ultrix4.4)
	75	canonhost := mips-dec-ultrix
	76	endif
	77	ifeq ($(canonhost),mips-sgi-irix4.0.1)
	78	canonhost := mips-sgi-irix4
	79	endif
	80	ifeq ($(canonhost),mips-sgi-irix4.0.5H)
	81	canonhost := mips-sgi-irix4
	82	endif
	83	ifeq ($(canonhost),mips-sgi-irix5.2)
	84	canonhost := mips-sgi-irix5
	85	endif
	86	ifeq ($(canonhost),rs6000-ibm-aix3.2)
	87	canonhost := rs6000-ibm-aix
	88	endif
	89	ifeq ($(canonhost),i486-unknown-sco3.2v4.0)
	90	canonhost := i386-sco3.2v4
	91	endif
	92	ifeq ($(canonhost),i386-unknown-sco3.2v4.0)
	93	canonhost := i386-sco3.2v4
	94	endif
	95	ifeq ($(canonhost),i386-unknown-sco3.2v4)
	96	canonhost := i386-sco3.2v4
	97	endif
	98	ifeq ($(canonhost),i386-unknown-go32)
	99	canonhost := i386-go32
	100	endif
	101	ifeq ($(canonhost),i386-unknown-sysv4.2)
	102	canonhost := i386-sysv4.2
	103	endif
	104	ifeq ($(canonhost),i386-lynx-lynxos)
	105	canonhost := i386-lynx
	106	endif
	107	ifeq ($(canonhost),m68k-lynx-lynxos)
	108	canonhost := m68k-lynx
	109	endif
	110	ifeq ($(canonhost),sparc-lynx-lynxos)
	111	canonhost := sparc-lynx
	112	endif
	113	ifeq ($(canonhost),rs6000-lynx-lynxos)
	114	canonhost := rs6000-lynx
	115	endif
	116	ifeq ($(canonhost),i386-unknown-linux)
	117	canonhost := i386-linux
	118	endif
	119	ifeq ($(canonhost),i486-unknown-linux)
	120	canonhost := i486-linux
	121	endif
	122	ifeq ($(canonhost),i586-unknown-linux)
	123	canonhost := i486-linux
	124	endif
	125	ifeq ($(canonhost),i386-unknown-linuxaout)
	126	canonhost := i386-linuxaout
	127	endif
	128	ifeq ($(canonhost),i486-unknown-linuxaout)
	129	canonhost := i486-linuxaout
	130	endif
	131	ifeq ($(canonhost),i586-unknown-linuxaout)
	132	canonhost := i486-linuxaout
	133	endif
	134
	135	#
	136	# The following TARGETS variable settings probably ought to
	137	# be made automatically from the
	138	# /s1/cygnus/progressive/host-target-pairs.tbl file, using
	139	# the /s1/cygnus/progressive/targets script. But, be sure
	140	# that the native is spelled 'native'.
	141	#
	142
	143	ifeq ($(canonhost),sparc-sun-sunos4.1)
	144	TARGETS = $(NATIVE) \
	145	i386-go32 \
	146	a29k-amd-udi a29k-vxworks5.1 \
	147	sh-hms h8300-hms \
	148	powerpc-eabi hppa1.1-hp-proelf \
	149	i386-aout i386-elf \
	150	i960-nindy-coff i960-vxworks5.0 i960-vxworks5.1 \
	151	m68k-aout m68k-coff m68k-elf m68k-vxworks5.1 \
	152	mips-elf mips-idt-ecoff mips64-elf \
	153	sparc-aout sparclite-aout sparclite-coff \
	154	z8k-coff i386-unixware mips-ncd-elf \
	155	OSE68000 OSE68k
	156	GCC = gcc -O2 -pipe
	157	all: all-cygnus
	158	endif
	159
	160	ifeq ($(canonhost),sparc-sun-sunos4.1.3)
	161	TARGETS = $(NATIVE) \
	162	i386-go32 \
	163	a29k-amd-udi \
	164	h8300-hms h8500-hms \
	165	hppa1.1-hp-proelf \
	166	i386-aout i386-elf \
	167	i960-nindy-coff i960-vxworks5.0 i960-vxworks5.1 \
	168	m68k-aout m68k-coff m68k-elf m68k-vxworks5.1 \
	169	mips-idt-ecoff mips64-elf mips-elf \
	170	sh-hms \
	171	sparc-aout sparc64-aout sparc-vxworks \
	172	sparclite-aout sparclite-coff sparclite-vxworks \
	173	z8k-coff \
	174	OSE68000 OSE68k mips-ncd-elf i386-unixware
	175	# The OSE68000 and OSE68k targets are for Ericsson only.
	176	GCC = gcc -O2 -pipe
	177	all: all-cygnus
	178	endif
	179
	180	ifeq ($(canonhost),m68k-sun-sunos4.1.1)
	181	TARGETS = $(NATIVE)
	182	GCC = gcc -O2 -msoft-float
	183	CC = cc -J
	184	all: all-cygnus
	185	endif
	186
	187	ifeq ($(canonhost),sparc-sun-solaris2)
	188	TARGETS = $(NATIVE) \
	189	a29k-amd-udi \
	190	h8300-hms h8500-hms \
	191	hppa1.1-hp-proelf \
	192	i960-vxworks5.0 i960-vxworks5.1 \
	193	m68k-aout m68k-coff m68k-vxworks5.1 m88k-coff \
	194	mips-idt-ecoff mips-elf \
	195	sparc64-elf sparclite-aout sparclite-coff \
	196	OSE68000 OSE68k \
	197	sparc-sun-sunos4.1.3
	198	# The latter assures that BNR's special build (which they now
	199	# do for themselves from sources) hasn't developed bit-rot.
	200	# The OSE68000 and OSE68k targets are for Ericsson only.
	201
	202	CC = cc
	203	GCC = gcc -O2 -pipe
	204	all: all-cygnus
	205	endif
	206
	207	ifeq ($(canonhost),mips-dec-ultrix)
	208	TARGETS = $(NATIVE)
	209	CC = cc -Wf,-XNg1000
	210	all: all-cygnus
	211	SHELL = /usr/unsupported/bin/bash
	212	CONFIG_SHELL = /usr/unsupported/bin/bash
	213	TMPDIR = $(shell mkdir $(canonhost)-tmpdir; cd $(canonhost)-tmpdir ; pwd)
	214	endif
	215
	216	ifeq ($(patsubst alpha-dec-osf%,alpha,$(canonhost)),alpha)
	217	TARGETS = $(NATIVE)
	218	CC = cc
	219	all: all-cygnus
	220	endif
	221
	222	ifeq ($(canonhost),mips-sgi-irix4)
	223	TARGETS = $(NATIVE) \
	224	mips-idt-ecoff \
	225	mips-elf mips64-elf \
	226	sh-hms
	227	CC = cc -cckr -Wf,-XNg1500 -Wf,-XNk1000 -Wf,-XNh2000
	228	all: all-cygnus
	229	endif
	230
	231	ifeq ($(canonhost),mips-sgi-irix5)
	232	TARGETS = $(NATIVE) \
	233	mips-idt-ecoff \
	234	mips-elf mips64-elf \
	235	sh-hms
	236	CC = cc -cckr -Wf,-XNg1500 -Wf,-XNk1000 -Wf,-XNh2000
	237	all: all-cygnus
	238	endif
	239
	240	ifeq ($(canonhost),powerpc-ibm-aix4.1)
	241	TARGETS = $(NATIVE)
	242	all: all-cygnus
	243	endif
	244
	245	ifeq ($(canonhost),rs6000-ibm-aix)
	246	TARGETS = $(NATIVE) \
	247	i960-vxworks5.0 i960-vxworks5.1 \
	248	m68k-aout
	249	all: all-cygnus
	250	endif
	251
	252	ifeq ($(canonhost),rs6000-ibm-aix3.2.5)
	253	TARGETS = $(NATIVE) \
	254	i960-vxworks5.0 i960-vxworks5.1 \
	255	m68k-aout
	256	all: all-cygnus
	257	endif
	258
	259	ifeq ($(canonhost),rs6000-ibm-aix4.1)
	260	TARGETS = $(NATIVE)
	261	all: all-cygnus
	262	endif
	263
	264	ifeq ($(canonhost),m68k-hp-hpux9)
	265	TARGETS = $(NATIVE)
	266	TMPDIR := $(shell mkdir $(canonhost)-tmpdir; cd $(canonhost)-tmpdir ; pwd)
	267	CC = cc -Wp,-P,-H256000
	268	#CFLAGS = +O1000
	269	CFLAGS = -g
	270	all: all-cygnus
	271	endif
	272
	273	ifeq ($(canonhost),hppa1.1-hp-hpux9)
	274	TARGETS = \
	275	$(NATIVE) \
	276	h8300-hms \
	277	hppa1.1-hp-proelf \
	278	i960-vxworks5.0 i960-vxworks5.1 \
	279	m68k-aout m68k-coff m68k-vxworks5.1
	280	CC = cc -Wp,-H256000
	281	#CFLAGS = +Obb2000
	282	CFLAGS = -g
	283	all: all-cygnus
	284	endif
	285
	286	#ifeq ($(canonhost),hppa1.1-hp-hpux10)
	287	ifeq ($(patsubst hppa1.1-hp-hpux10%,hpux10,$(canonhost)),hpux10)
	288	TARGETS = $(NATIVE)
	289	CC = cc -Wp,-H256000
	290	#CFLAGS = +Obb2000
	291	CFLAGS = -g
	292	all: all-cygnus
	293	endif
	294
	295	ifeq ($(canonhost),i386-sco3.2v4)
	296	TARGETS = $(NATIVE)
	297	all: all-cygnus
	298	endif
	299
	300	ifeq ($(canonhost),i386-go32)
	301	TARGETS = \
	302	a29k-amd-udi \
	303	h8300-hms hppa1.1-hp-proelf \
	304	i386-aout \
	305	m68k-aout m68k-coff \
	306	mips-elf mips-idt-ecoff mips64-elf \
	307	sh-hms \
	308	sparc-aout sparclite-aout sparclite-coff
	309	CC = i386-go32-gcc
	310	GCC = i386-go32-gcc -O2
	311	CFLAGS =
	312	CXXFLAGS = -O2
	313	MAKEINFOFLAGS = --no-split
	314	all: all-dos
	315	endif
	316
	317	ifeq ($(canonhost),i386-sysv4.2)
	318	TARGETS = $(NATIVE) i386-netware
	319	CC = cc
	320	all: all-cygnus
	321	endif
	322
	323	ifeq ($(canonhost),i386-ncr-sysv4.3)
	324	TARGETS = $(NATIVE)
	325	CC = cc -Hnocopyr
	326	SHELL = /usr/unsupported/bin/bash
	327	CONFIG_SHELL = /usr/unsupported/bin/bash
	328	all: all-cygnus
	329	endif
	330
	331	ifeq ($(canonhost),i386-lynx)
	332	TARGETS = $(NATIVE)
	333	CC = /usr/cygnus/progressive/bin/gcc
	334	all: all-cygnus
	335	SHELL=/bin/bash
	336	endif
	337
	338	ifeq ($(canonhost),m68k-lynx)
	339	TARGETS = $(NATIVE)
	340	CC = /usr/cygnus/progressive/bin/gcc
	341	all: all-cygnus
	342	SHELL=/bin/bash
	343	endif
	344
	345	ifeq ($(canonhost),sparc-lynx)
	346	TARGETS = $(NATIVE)
	347	CC = /usr/cygnus/progressive/bin/gcc
	348	all: all-cygnus
	349	SHELL=/bin/bash
	350	endif
	351
	352	ifeq ($(canonhost),rs6000-lynx)
	353	TARGETS = $(NATIVE)
	354	CC = /usr/cygnus/progressive/bin/gcc
	355	all: all-cygnus
	356	SHELL=/bin/bash
	357	endif
	358
	359	ifeq ($(patsubst %-linux,linux,$(patsubst %-linuxaout,linux,$(canonhost))),linux)
	360	TARGETS = $(NATIVE)
	361	all: all-cygnus
	362	endif
	363
	364	FLAGS_TO_PASS := \
	365	"GCC=$(GCC)" \
	366	"CC=$(CC)" \
	367	"CFLAGS=$(CFLAGS)" \
	368	"GNUCFLAGS=$(GNUCFLAGS)" \
	369	"CXXFLAGS=$(CXXFLAGS)" \
	370	"host=$(canonhost)" \
	371	"MAKEINFOFLAGS=$(MAKEINFOFLAGS)" \
	372	"RELEASE_TAG=$(RELEASE_TAG)" \
	373	"SHELL=$(SHELL)"
	374
	375	# set GNU_MAKE and CONFIG_SHELL correctly in sub-builds
	376	ifeq ($(patsubst %-lynx,lynx,$(canonhost)),lynx)
	377	FLAGS_TO_PASS := $(FLAGS_TO_PASS) "GNU_MAKE=$(MAKE)" "CONFIG_SHELL=/bin/bash"
	378	endif
	379
	380	ifeq ($(patsubst %-linux,linux,$(patsubst %-linuxaout,linux,$(canonhost))),linux)
	381	FLAGS_TO_PASS := $(FLAGS_TO_PASS) "GNU_MAKE=$(MAKE)"
	382	endif
	383
	384	ifeq ($(patsubst %i386-ncr-sysv4.3,ncr,$(canonhost)),ncr)
	385	FLAGS_TO_PASS := $(FLAGS_TO_PASS) "CONFIG_SHELL=/usr/unsupported/bin/bash"
	386	endif
	387
	388	all-emacs:
	389	@echo build started at `date`
	390	test -d $(INSTALLDIR) \|\| mkdir $(INSTALLDIR)
	391	-rm -f $(ROOTING)/$(RELEASE_TAG)
	392	ln -s $(INSTALLDIR) $(ROOTING)/$(RELEASE_TAG)
	393	$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) do1 > $(canonhost)-emacs-native-log 2>&1
	394	$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) do-latest > $(canonhost)-emacs-latest-log 2>&1
	395	@echo done at `date`
	396
	397	all-cygnus:
	398	@echo build started at `date`
	399	test -d $(INSTALLDIR) \|\| mkdir $(INSTALLDIR)
	400	-rm -f $(ROOTING)/$(RELEASE_TAG) && ln -s $(INSTALLDIR) $(ROOTING)/$(RELEASE_TAG)
	401	#
	402	# The following line to be used during regular progressive builds
	403	# to help developers test, but should be commented out for final
	404	# progressive build.
	405	#
	406	# -rm -f $(ROOTING)/progressive-beta && ln -s $(RELEASE_TAG) $(ROOTING)/progresssive
	407	@for i in $(TARGETS) ; do \
	408	if [ "$$i" = "native" ] ; then \
	409	if [ ! -f $(canonhost)-stamp-3stage-done ] ; then \
	410	echo "3staging $(canonhost) native" ; \
	411	echo Flags passed to make: $(FLAGS_TO_PASS) ; \
	412	if $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) $(canonhost)-stamp-3stage-done $(log); then \
	413	echo " completed successfully" ; \
	414	else \
	415	exit 1; \
	416	fi; \
	417	else \
	418	true ; \
	419	fi ; \
	420	else \
	421	echo "building $(canonhost) cross to $$i" ; \
	422	$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i do-cygnus $(cyglog) && \
	423	echo " completed successfully" ; \
	424	fi ; \
	425	done
	426	@if [ ! -f $(canonhost)-stamp-3stage-checked ] ; then \
	427	echo checking $(canonhost) native ; \
	428	$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) $(canonhost)-check-3stage $(clog) ; \
	429	touch $(canonhost)-stamp-3stage-checked ; \
	430	else \
	431	true ; \
	432	fi
	433	@echo done at `date`
	434
	435	native:
	436	@echo build started at `date`
	437	test -d $(INSTALLDIR) \|\| mkdir $(INSTALLDIR)
	438	-rm -f $(ROOTING)/$(RELEASE_TAG) && ln -s $(INSTALLDIR) $(ROOTING)/$(RELEASE_TAG)
	439	# -rm -f $(ROOTING)/progressive-beta && ln -s $(RELEASE_TAG) $(ROOTING)/progressive-beta
	440	$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) $(canonhost)-stamp-3stage-done $(log)
	441	@echo done at `date`
	442
	443	build-cygnus:
	444	@echo build started at `date`
	445	@for i in $(TARGETS) ; do \
	446	if [ "$$i" = "native" ] ; then \
	447	if [ ! -f $(canonhost)-3stage-done ] ; then \
	448	echo "3staging $(canonhost) native" ; \
	449	$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) $(canonhost)-stamp-3stage-done $(log) && \
	450	echo " completed successfully" ; \
	451	fi ; \
	452	else \
	453	echo "building $(canonhost) cross to $$i:" `date` ; \
	454	$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i build-cygnus $(cyglog) && \
	455	echo " completed successfully" ; \
	456	fi ; \
	457	done
	458	@echo done at `date`
	459
	460	build-latest:
	461	@echo build started at `date`
	462	@for i in $(TARGETS) ; do \
	463	if [ "$$i" != "native" ] ; then \
	464	echo "building $(canonhost) cross to $$i:" `date` ; \
	465	$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i build-latest $(latestlog) && \
	466	echo " completed successfully" ; \
	467	fi ; \
	468	done
	469	@echo done at `date`
	470
	471	all-native:
	472	test -d $(INSTALLDIR) \|\| mkdir $(INSTALLDIR)
	473	rm -f $(ROOTING)/$(RELEASE_TAG)
	474	ln -s $(INSTALLDIR) $(ROOTING)/$(RELEASE_TAG)
	475	@for i in $(TARGETS) ; do \
	476	echo "building $(canonhost) cross to $$i" ; \
	477	$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i do-native $(natlog) && \
	478	echo " completed successfully" ; \
	479	done
	480
	481	all-cross:
	482	test -d $(INSTALLDIR) \|\| mkdir $(INSTALLDIR)
	483	rm -f $(ROOTING)/$(RELEASE_TAG)
	484	ln -s $(INSTALLDIR) $(ROOTING)/$(RELEASE_TAG)
	485	@for i in $(TARGETS) ; do \
	486	echo "building $(canonhost) cross to $$i" ; \
	487	$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i build=$(build) do-cygnus $(cyglog) && \
	488	echo " completed successfully" ; \
	489	done
	490
	491	do-dos:
	492	$(MAKE) -f build-all.mk build=$(host) host=i386-go32 all-dos
	493	all-dos:
	494	@for i in $(TARGETS) ; do \
	495	echo "building $(canonhost) cross to $$i" ; \
	496	$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) host=$(host) target=$$i do-dos $(cyglog) && \
	497	echo " completed successfully at `date`" ; \
	498	done
	499
	500	config:
	501	@for i in $(TARGETS) ; do \
	502	if [ "$$i" = "native" ] ; then \
	503	echo "config stage1 for $(canonhost)" ; \
	504	$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) do1-config $(log) && \
	505	echo " completed successfully" ; \
	506	else \
	507	echo "config $(canonhost) cross to $$i" ; \
	508	$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i do-native-config $(cyglog) && \
	509	echo " completed successfully" ; \
	510	fi ; \
	511	done
	512
	513
	514	build:
	515	@for i in $(TARGETS) ; do \
	516	if [ "$$i" = "native" ] ; then \
	517	$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) do1-build $(log) && \
	518	echo " completed successfully" ; \
	519	else \
	520	echo "building $(canonhost) cross to $$i" ; \
	521	$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i build-native $(natlog) && \
	522	echo " completed successfully" ; \
	523	fi ; \
	524	done
	525
	526
	527	3build:
	528	@for i in $(TARGETS) ; do \
	529	if [ "$$i" = "native" ] ; then \
	530	echo "building 3stage for $(canonhost)" ; \
	531	$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) all $(log) && \
	532	echo " completed successfully" ; \
	533	else \
	534	echo "building $(canonhost) cross to $$i" ; \
	535	$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i build-cygnus $(cyglog) && \
	536	echo " completed successfully" ; \
	537	fi ; \
	538	done
	539
	540	build-all-latest:
	541	@for i in $(TARGETS) ; do \
	542	if [ "$$i" = "native" ] ; then \
	543	echo "building 3stage for $(canonhost)" ; \
	544	$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) $(canonhost)-stamp-3stage-done $(log) && \
	545	echo " completed successfully" ; \
	546	else \
	547	echo "building $(canonhost) cross to $$i" ; \
	548	$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i build-latest $(cyglog) && \
	549	echo " completed successfully" ; \
	550	fi ; \
	551	done
	552
	553	clean:
	554	$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) clean $(log)
	555
	556	### Local Variables:
	557	### fill-column: 131
	558	### End: