[deliverable/linux.git] / drivers / gpu / drm / Kconfig

#
# Drm device configuration
#
# This driver provides support for the
# Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
#
menuconfig DRM
	tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
	depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && MMU && HAS_DMA
	select HDMI
	select FB_CMDLINE
	select I2C
	select I2C_ALGOBIT
	select DMA_SHARED_BUFFER
	help
	  Kernel-level support for the Direct Rendering Infrastructure (DRI)
	  introduced in XFree86 4.0. If you say Y here, you need to select
	  the module that's right for your graphics card from the list below.
	  These modules provide support for synchronization, security, and
	  DMA transfers. Please see <http://dri.sourceforge.net/> for more
	  details.  You should also select and configure AGP
	  (/dev/agpgart) support if it is available for your platform.

config DRM_MIPI_DSI
	bool
	depends on DRM

config DRM_KMS_HELPER
	tristate
	depends on DRM
	help
	  CRTC helpers for KMS drivers.

config DRM_KMS_FB_HELPER
	bool
	depends on DRM_KMS_HELPER
	select FB
	select FRAMEBUFFER_CONSOLE if !EXPERT
	select FRAMEBUFFER_CONSOLE_DETECT_PRIMARY if FRAMEBUFFER_CONSOLE
	help
	  FBDEV helpers for KMS drivers.

config DRM_LOAD_EDID_FIRMWARE
	bool "Allow to specify an EDID data set instead of probing for it"
	depends on DRM_KMS_HELPER
	help
	  Say Y here, if you want to use EDID data to be loaded from the
	  /lib/firmware directory or one of the provided built-in
	  data sets. This may be necessary, if the graphics adapter or
	  monitor are unable to provide appropriate EDID data. Since this
	  feature is provided as a workaround for broken hardware, the
	  default case is N. Details and instructions how to build your own
	  EDID data are given in Documentation/EDID/HOWTO.txt.

config DRM_TTM
	tristate
	depends on DRM
	help
	  GPU memory management subsystem for devices with multiple
	  GPU memory types. Will be enabled automatically if a device driver
	  uses it.

config DRM_GEM_CMA_HELPER
	bool
	depends on DRM
	help
	  Choose this if you need the GEM CMA helper functions

config DRM_KMS_CMA_HELPER
	bool
	select DRM_GEM_CMA_HELPER
	select DRM_KMS_FB_HELPER
	select FB_SYS_FILLRECT
	select FB_SYS_COPYAREA
	select FB_SYS_IMAGEBLIT
	help
	  Choose this if you need the KMS CMA helper functions

source "drivers/gpu/drm/i2c/Kconfig"

source "drivers/gpu/drm/bridge/Kconfig"

config DRM_TDFX
	tristate "3dfx Banshee/Voodoo3+"
	depends on DRM && PCI
	help
	  Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
	  graphics card.  If M is selected, the module will be called tdfx.

config DRM_R128
	tristate "ATI Rage 128"
	depends on DRM && PCI
	select FW_LOADER
	help
	  Choose this option if you have an ATI Rage 128 graphics card.  If M
	  is selected, the module will be called r128.  AGP support for
	  this card is strongly suggested (unless you have a PCI version).

config DRM_RADEON
	tristate "ATI Radeon"
	depends on DRM && PCI
	select FB_CFB_FILLRECT
	select FB_CFB_COPYAREA
	select FB_CFB_IMAGEBLIT
	select FW_LOADER
        select DRM_KMS_HELPER
	select DRM_KMS_FB_HELPER
        select DRM_TTM
	select POWER_SUPPLY
	select HWMON
	select BACKLIGHT_CLASS_DEVICE
	select INTERVAL_TREE
	help
	  Choose this option if you have an ATI Radeon graphics card.  There
	  are both PCI and AGP versions.  You don't need to choose this to
	  run the Radeon in plain VGA mode.

	  If M is selected, the module will be called radeon.

source "drivers/gpu/drm/radeon/Kconfig"

source "drivers/gpu/drm/nouveau/Kconfig"

config DRM_I810
	tristate "Intel I810"
	# !PREEMPT because of missing ioctl locking
	depends on DRM && AGP && AGP_INTEL && (!PREEMPT || BROKEN)
	help
	  Choose this option if you have an Intel I810 graphics card.  If M is
	  selected, the module will be called i810.  AGP support is required
	  for this driver to work.

source "drivers/gpu/drm/i915/Kconfig"

config DRM_MGA
	tristate "Matrox g200/g400"
	depends on DRM && PCI
	select FW_LOADER
	help
	  Choose this option if you have a Matrox G200, G400 or G450 graphics
	  card.  If M is selected, the module will be called mga.  AGP
	  support is required for this driver to work.

config DRM_SIS
	tristate "SiS video cards"
	depends on DRM && AGP
	depends on FB_SIS || FB_SIS=n
	help
	  Choose this option if you have a SiS 630 or compatible video
          chipset. If M is selected the module will be called sis. AGP
          support is required for this driver to work.

config DRM_VIA
	tristate "Via unichrome video cards"
	depends on DRM && PCI
	help
	  Choose this option if you have a Via unichrome or compatible video
	  chipset. If M is selected the module will be called via.

config DRM_SAVAGE
	tristate "Savage video cards"
	depends on DRM && PCI
	help
	  Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister
	  chipset. If M is selected the module will be called savage.

source "drivers/gpu/drm/exynos/Kconfig"

source "drivers/gpu/drm/rockchip/Kconfig"

source "drivers/gpu/drm/vmwgfx/Kconfig"

source "drivers/gpu/drm/gma500/Kconfig"

source "drivers/gpu/drm/udl/Kconfig"

source "drivers/gpu/drm/ast/Kconfig"

source "drivers/gpu/drm/mgag200/Kconfig"

source "drivers/gpu/drm/cirrus/Kconfig"

source "drivers/gpu/drm/armada/Kconfig"

source "drivers/gpu/drm/atmel-hlcdc/Kconfig"

source "drivers/gpu/drm/rcar-du/Kconfig"

source "drivers/gpu/drm/shmobile/Kconfig"

source "drivers/gpu/drm/omapdrm/Kconfig"

source "drivers/gpu/drm/tilcdc/Kconfig"

source "drivers/gpu/drm/qxl/Kconfig"

source "drivers/gpu/drm/bochs/Kconfig"

source "drivers/gpu/drm/msm/Kconfig"

source "drivers/gpu/drm/tegra/Kconfig"

source "drivers/gpu/drm/panel/Kconfig"

source "drivers/gpu/drm/sti/Kconfig"

source "drivers/gpu/drm/amd/amdkfd/Kconfig"

source "drivers/gpu/drm/imx/Kconfig"
Commit	Line	Data
	1	#
	2	# Drm device configuration
	3	#
	4	# This driver provides support for the
	5	# Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
	6	#
	7	menuconfig DRM
	8	tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
	9	depends on (AGP \|\| AGP=n) && !EMULATED_CMPXCHG && MMU && HAS_DMA
	10	select HDMI
	11	select FB_CMDLINE
	12	select I2C
	13	select I2C_ALGOBIT
	14	select DMA_SHARED_BUFFER
	15	help
	16	Kernel-level support for the Direct Rendering Infrastructure (DRI)
	17	introduced in XFree86 4.0. If you say Y here, you need to select
	18	the module that's right for your graphics card from the list below.
	19	These modules provide support for synchronization, security, and
	20	DMA transfers. Please see <http://dri.sourceforge.net/> for more
	21	details. You should also select and configure AGP
	22	(/dev/agpgart) support if it is available for your platform.
	23
	24	config DRM_MIPI_DSI
	25	bool
	26	depends on DRM
	27
	28	config DRM_KMS_HELPER
	29	tristate
	30	depends on DRM
	31	help
	32	CRTC helpers for KMS drivers.
	33
	34	config DRM_KMS_FB_HELPER
	35	bool
	36	depends on DRM_KMS_HELPER
	37	select FB
	38	select FRAMEBUFFER_CONSOLE if !EXPERT
	39	select FRAMEBUFFER_CONSOLE_DETECT_PRIMARY if FRAMEBUFFER_CONSOLE
	40	help
	41	FBDEV helpers for KMS drivers.
	42
	43	config DRM_LOAD_EDID_FIRMWARE
	44	bool "Allow to specify an EDID data set instead of probing for it"
	45	depends on DRM_KMS_HELPER
	46	help
	47	Say Y here, if you want to use EDID data to be loaded from the
	48	/lib/firmware directory or one of the provided built-in
	49	data sets. This may be necessary, if the graphics adapter or
	50	monitor are unable to provide appropriate EDID data. Since this
	51	feature is provided as a workaround for broken hardware, the
	52	default case is N. Details and instructions how to build your own
	53	EDID data are given in Documentation/EDID/HOWTO.txt.
	54
	55	config DRM_TTM
	56	tristate
	57	depends on DRM
	58	help
	59	GPU memory management subsystem for devices with multiple
	60	GPU memory types. Will be enabled automatically if a device driver
	61	uses it.
	62
	63	config DRM_GEM_CMA_HELPER
	64	bool
	65	depends on DRM
	66	help
	67	Choose this if you need the GEM CMA helper functions
	68
	69	config DRM_KMS_CMA_HELPER
	70	bool
	71	select DRM_GEM_CMA_HELPER
	72	select DRM_KMS_FB_HELPER
	73	select FB_SYS_FILLRECT
	74	select FB_SYS_COPYAREA
	75	select FB_SYS_IMAGEBLIT
	76	help
	77	Choose this if you need the KMS CMA helper functions
	78
	79	source "drivers/gpu/drm/i2c/Kconfig"
	80
	81	source "drivers/gpu/drm/bridge/Kconfig"
	82
	83	config DRM_TDFX
	84	tristate "3dfx Banshee/Voodoo3+"
	85	depends on DRM && PCI
	86	help
	87	Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
	88	graphics card. If M is selected, the module will be called tdfx.
	89
	90	config DRM_R128
	91	tristate "ATI Rage 128"
	92	depends on DRM && PCI
	93	select FW_LOADER
	94	help
	95	Choose this option if you have an ATI Rage 128 graphics card. If M
	96	is selected, the module will be called r128. AGP support for
	97	this card is strongly suggested (unless you have a PCI version).
	98
	99	config DRM_RADEON
	100	tristate "ATI Radeon"
	101	depends on DRM && PCI
	102	select FB_CFB_FILLRECT
	103	select FB_CFB_COPYAREA
	104	select FB_CFB_IMAGEBLIT
	105	select FW_LOADER
	106	select DRM_KMS_HELPER
	107	select DRM_KMS_FB_HELPER
	108	select DRM_TTM
	109	select POWER_SUPPLY
	110	select HWMON
	111	select BACKLIGHT_CLASS_DEVICE
	112	select INTERVAL_TREE
	113	help
	114	Choose this option if you have an ATI Radeon graphics card. There
	115	are both PCI and AGP versions. You don't need to choose this to
	116	run the Radeon in plain VGA mode.
	117
	118	If M is selected, the module will be called radeon.
	119
	120	source "drivers/gpu/drm/radeon/Kconfig"
	121
	122	source "drivers/gpu/drm/nouveau/Kconfig"
	123
	124	config DRM_I810
	125	tristate "Intel I810"
	126	# !PREEMPT because of missing ioctl locking
	127	depends on DRM && AGP && AGP_INTEL && (!PREEMPT \|\| BROKEN)
	128	help
	129	Choose this option if you have an Intel I810 graphics card. If M is
	130	selected, the module will be called i810. AGP support is required
	131	for this driver to work.
	132
	133	source "drivers/gpu/drm/i915/Kconfig"
	134
	135	config DRM_MGA
	136	tristate "Matrox g200/g400"
	137	depends on DRM && PCI
	138	select FW_LOADER
	139	help
	140	Choose this option if you have a Matrox G200, G400 or G450 graphics
	141	card. If M is selected, the module will be called mga. AGP
	142	support is required for this driver to work.
	143
	144	config DRM_SIS
	145	tristate "SiS video cards"
	146	depends on DRM && AGP
	147	depends on FB_SIS \|\| FB_SIS=n
	148	help
	149	Choose this option if you have a SiS 630 or compatible video
	150	chipset. If M is selected the module will be called sis. AGP
	151	support is required for this driver to work.
	152
	153	config DRM_VIA
	154	tristate "Via unichrome video cards"
	155	depends on DRM && PCI
	156	help
	157	Choose this option if you have a Via unichrome or compatible video
	158	chipset. If M is selected the module will be called via.
	159
	160	config DRM_SAVAGE
	161	tristate "Savage video cards"
	162	depends on DRM && PCI
	163	help
	164	Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister
	165	chipset. If M is selected the module will be called savage.
	166
	167	source "drivers/gpu/drm/exynos/Kconfig"
	168
	169	source "drivers/gpu/drm/rockchip/Kconfig"
	170
	171	source "drivers/gpu/drm/vmwgfx/Kconfig"
	172
	173	source "drivers/gpu/drm/gma500/Kconfig"
	174
	175	source "drivers/gpu/drm/udl/Kconfig"
	176
	177	source "drivers/gpu/drm/ast/Kconfig"
	178
	179	source "drivers/gpu/drm/mgag200/Kconfig"
	180
	181	source "drivers/gpu/drm/cirrus/Kconfig"
	182
	183	source "drivers/gpu/drm/armada/Kconfig"
	184
	185	source "drivers/gpu/drm/atmel-hlcdc/Kconfig"
	186
	187	source "drivers/gpu/drm/rcar-du/Kconfig"
	188
	189	source "drivers/gpu/drm/shmobile/Kconfig"
	190
	191	source "drivers/gpu/drm/omapdrm/Kconfig"
	192
	193	source "drivers/gpu/drm/tilcdc/Kconfig"
	194
	195	source "drivers/gpu/drm/qxl/Kconfig"
	196
	197	source "drivers/gpu/drm/bochs/Kconfig"
	198
	199	source "drivers/gpu/drm/msm/Kconfig"
	200
	201	source "drivers/gpu/drm/tegra/Kconfig"
	202
	203	source "drivers/gpu/drm/panel/Kconfig"
	204
	205	source "drivers/gpu/drm/sti/Kconfig"
	206
	207	source "drivers/gpu/drm/amd/amdkfd/Kconfig"
	208
	209	source "drivers/gpu/drm/imx/Kconfig"