| 1 | /* |
| 2 | * Copyright © 2006-2007 Intel Corporation |
| 3 | * |
| 4 | * Permission is hereby granted, free of charge, to any person obtaining a |
| 5 | * copy of this software and associated documentation files (the "Software"), |
| 6 | * to deal in the Software without restriction, including without limitation |
| 7 | * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| 8 | * and/or sell copies of the Software, and to permit persons to whom the |
| 9 | * Software is furnished to do so, subject to the following conditions: |
| 10 | * |
| 11 | * The above copyright notice and this permission notice (including the next |
| 12 | * paragraph) shall be included in all copies or substantial portions of the |
| 13 | * Software. |
| 14 | * |
| 15 | * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| 16 | * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| 17 | * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| 18 | * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| 19 | * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| 20 | * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER |
| 21 | * DEALINGS IN THE SOFTWARE. |
| 22 | * |
| 23 | * Authors: |
| 24 | * Eric Anholt <eric@anholt.net> |
| 25 | */ |
| 26 | |
| 27 | #include <linux/dmi.h> |
| 28 | #include <linux/module.h> |
| 29 | #include <linux/input.h> |
| 30 | #include <linux/i2c.h> |
| 31 | #include <linux/kernel.h> |
| 32 | #include <linux/slab.h> |
| 33 | #include <linux/vgaarb.h> |
| 34 | #include <drm/drm_edid.h> |
| 35 | #include <drm/drmP.h> |
| 36 | #include "intel_drv.h" |
| 37 | #include <drm/i915_drm.h> |
| 38 | #include "i915_drv.h" |
| 39 | #include "i915_trace.h" |
| 40 | #include <drm/drm_dp_helper.h> |
| 41 | #include <drm/drm_crtc_helper.h> |
| 42 | #include <linux/dma_remapping.h> |
| 43 | |
| 44 | static void intel_increase_pllclock(struct drm_crtc *crtc); |
| 45 | static void intel_crtc_update_cursor(struct drm_crtc *crtc, bool on); |
| 46 | |
| 47 | static void i9xx_crtc_clock_get(struct intel_crtc *crtc, |
| 48 | struct intel_crtc_config *pipe_config); |
| 49 | static void ironlake_pch_clock_get(struct intel_crtc *crtc, |
| 50 | struct intel_crtc_config *pipe_config); |
| 51 | |
| 52 | static int intel_set_mode(struct drm_crtc *crtc, struct drm_display_mode *mode, |
| 53 | int x, int y, struct drm_framebuffer *old_fb); |
| 54 | static int intel_framebuffer_init(struct drm_device *dev, |
| 55 | struct intel_framebuffer *ifb, |
| 56 | struct drm_mode_fb_cmd2 *mode_cmd, |
| 57 | struct drm_i915_gem_object *obj); |
| 58 | |
| 59 | typedef struct { |
| 60 | int min, max; |
| 61 | } intel_range_t; |
| 62 | |
| 63 | typedef struct { |
| 64 | int dot_limit; |
| 65 | int p2_slow, p2_fast; |
| 66 | } intel_p2_t; |
| 67 | |
| 68 | typedef struct intel_limit intel_limit_t; |
| 69 | struct intel_limit { |
| 70 | intel_range_t dot, vco, n, m, m1, m2, p, p1; |
| 71 | intel_p2_t p2; |
| 72 | }; |
| 73 | |
| 74 | int |
| 75 | intel_pch_rawclk(struct drm_device *dev) |
| 76 | { |
| 77 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 78 | |
| 79 | WARN_ON(!HAS_PCH_SPLIT(dev)); |
| 80 | |
| 81 | return I915_READ(PCH_RAWCLK_FREQ) & RAWCLK_FREQ_MASK; |
| 82 | } |
| 83 | |
| 84 | static inline u32 /* units of 100MHz */ |
| 85 | intel_fdi_link_freq(struct drm_device *dev) |
| 86 | { |
| 87 | if (IS_GEN5(dev)) { |
| 88 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 89 | return (I915_READ(FDI_PLL_BIOS_0) & FDI_PLL_FB_CLOCK_MASK) + 2; |
| 90 | } else |
| 91 | return 27; |
| 92 | } |
| 93 | |
| 94 | static const intel_limit_t intel_limits_i8xx_dac = { |
| 95 | .dot = { .min = 25000, .max = 350000 }, |
| 96 | .vco = { .min = 908000, .max = 1512000 }, |
| 97 | .n = { .min = 2, .max = 16 }, |
| 98 | .m = { .min = 96, .max = 140 }, |
| 99 | .m1 = { .min = 18, .max = 26 }, |
| 100 | .m2 = { .min = 6, .max = 16 }, |
| 101 | .p = { .min = 4, .max = 128 }, |
| 102 | .p1 = { .min = 2, .max = 33 }, |
| 103 | .p2 = { .dot_limit = 165000, |
| 104 | .p2_slow = 4, .p2_fast = 2 }, |
| 105 | }; |
| 106 | |
| 107 | static const intel_limit_t intel_limits_i8xx_dvo = { |
| 108 | .dot = { .min = 25000, .max = 350000 }, |
| 109 | .vco = { .min = 908000, .max = 1512000 }, |
| 110 | .n = { .min = 2, .max = 16 }, |
| 111 | .m = { .min = 96, .max = 140 }, |
| 112 | .m1 = { .min = 18, .max = 26 }, |
| 113 | .m2 = { .min = 6, .max = 16 }, |
| 114 | .p = { .min = 4, .max = 128 }, |
| 115 | .p1 = { .min = 2, .max = 33 }, |
| 116 | .p2 = { .dot_limit = 165000, |
| 117 | .p2_slow = 4, .p2_fast = 4 }, |
| 118 | }; |
| 119 | |
| 120 | static const intel_limit_t intel_limits_i8xx_lvds = { |
| 121 | .dot = { .min = 25000, .max = 350000 }, |
| 122 | .vco = { .min = 908000, .max = 1512000 }, |
| 123 | .n = { .min = 2, .max = 16 }, |
| 124 | .m = { .min = 96, .max = 140 }, |
| 125 | .m1 = { .min = 18, .max = 26 }, |
| 126 | .m2 = { .min = 6, .max = 16 }, |
| 127 | .p = { .min = 4, .max = 128 }, |
| 128 | .p1 = { .min = 1, .max = 6 }, |
| 129 | .p2 = { .dot_limit = 165000, |
| 130 | .p2_slow = 14, .p2_fast = 7 }, |
| 131 | }; |
| 132 | |
| 133 | static const intel_limit_t intel_limits_i9xx_sdvo = { |
| 134 | .dot = { .min = 20000, .max = 400000 }, |
| 135 | .vco = { .min = 1400000, .max = 2800000 }, |
| 136 | .n = { .min = 1, .max = 6 }, |
| 137 | .m = { .min = 70, .max = 120 }, |
| 138 | .m1 = { .min = 8, .max = 18 }, |
| 139 | .m2 = { .min = 3, .max = 7 }, |
| 140 | .p = { .min = 5, .max = 80 }, |
| 141 | .p1 = { .min = 1, .max = 8 }, |
| 142 | .p2 = { .dot_limit = 200000, |
| 143 | .p2_slow = 10, .p2_fast = 5 }, |
| 144 | }; |
| 145 | |
| 146 | static const intel_limit_t intel_limits_i9xx_lvds = { |
| 147 | .dot = { .min = 20000, .max = 400000 }, |
| 148 | .vco = { .min = 1400000, .max = 2800000 }, |
| 149 | .n = { .min = 1, .max = 6 }, |
| 150 | .m = { .min = 70, .max = 120 }, |
| 151 | .m1 = { .min = 8, .max = 18 }, |
| 152 | .m2 = { .min = 3, .max = 7 }, |
| 153 | .p = { .min = 7, .max = 98 }, |
| 154 | .p1 = { .min = 1, .max = 8 }, |
| 155 | .p2 = { .dot_limit = 112000, |
| 156 | .p2_slow = 14, .p2_fast = 7 }, |
| 157 | }; |
| 158 | |
| 159 | |
| 160 | static const intel_limit_t intel_limits_g4x_sdvo = { |
| 161 | .dot = { .min = 25000, .max = 270000 }, |
| 162 | .vco = { .min = 1750000, .max = 3500000}, |
| 163 | .n = { .min = 1, .max = 4 }, |
| 164 | .m = { .min = 104, .max = 138 }, |
| 165 | .m1 = { .min = 17, .max = 23 }, |
| 166 | .m2 = { .min = 5, .max = 11 }, |
| 167 | .p = { .min = 10, .max = 30 }, |
| 168 | .p1 = { .min = 1, .max = 3}, |
| 169 | .p2 = { .dot_limit = 270000, |
| 170 | .p2_slow = 10, |
| 171 | .p2_fast = 10 |
| 172 | }, |
| 173 | }; |
| 174 | |
| 175 | static const intel_limit_t intel_limits_g4x_hdmi = { |
| 176 | .dot = { .min = 22000, .max = 400000 }, |
| 177 | .vco = { .min = 1750000, .max = 3500000}, |
| 178 | .n = { .min = 1, .max = 4 }, |
| 179 | .m = { .min = 104, .max = 138 }, |
| 180 | .m1 = { .min = 16, .max = 23 }, |
| 181 | .m2 = { .min = 5, .max = 11 }, |
| 182 | .p = { .min = 5, .max = 80 }, |
| 183 | .p1 = { .min = 1, .max = 8}, |
| 184 | .p2 = { .dot_limit = 165000, |
| 185 | .p2_slow = 10, .p2_fast = 5 }, |
| 186 | }; |
| 187 | |
| 188 | static const intel_limit_t intel_limits_g4x_single_channel_lvds = { |
| 189 | .dot = { .min = 20000, .max = 115000 }, |
| 190 | .vco = { .min = 1750000, .max = 3500000 }, |
| 191 | .n = { .min = 1, .max = 3 }, |
| 192 | .m = { .min = 104, .max = 138 }, |
| 193 | .m1 = { .min = 17, .max = 23 }, |
| 194 | .m2 = { .min = 5, .max = 11 }, |
| 195 | .p = { .min = 28, .max = 112 }, |
| 196 | .p1 = { .min = 2, .max = 8 }, |
| 197 | .p2 = { .dot_limit = 0, |
| 198 | .p2_slow = 14, .p2_fast = 14 |
| 199 | }, |
| 200 | }; |
| 201 | |
| 202 | static const intel_limit_t intel_limits_g4x_dual_channel_lvds = { |
| 203 | .dot = { .min = 80000, .max = 224000 }, |
| 204 | .vco = { .min = 1750000, .max = 3500000 }, |
| 205 | .n = { .min = 1, .max = 3 }, |
| 206 | .m = { .min = 104, .max = 138 }, |
| 207 | .m1 = { .min = 17, .max = 23 }, |
| 208 | .m2 = { .min = 5, .max = 11 }, |
| 209 | .p = { .min = 14, .max = 42 }, |
| 210 | .p1 = { .min = 2, .max = 6 }, |
| 211 | .p2 = { .dot_limit = 0, |
| 212 | .p2_slow = 7, .p2_fast = 7 |
| 213 | }, |
| 214 | }; |
| 215 | |
| 216 | static const intel_limit_t intel_limits_pineview_sdvo = { |
| 217 | .dot = { .min = 20000, .max = 400000}, |
| 218 | .vco = { .min = 1700000, .max = 3500000 }, |
| 219 | /* Pineview's Ncounter is a ring counter */ |
| 220 | .n = { .min = 3, .max = 6 }, |
| 221 | .m = { .min = 2, .max = 256 }, |
| 222 | /* Pineview only has one combined m divider, which we treat as m2. */ |
| 223 | .m1 = { .min = 0, .max = 0 }, |
| 224 | .m2 = { .min = 0, .max = 254 }, |
| 225 | .p = { .min = 5, .max = 80 }, |
| 226 | .p1 = { .min = 1, .max = 8 }, |
| 227 | .p2 = { .dot_limit = 200000, |
| 228 | .p2_slow = 10, .p2_fast = 5 }, |
| 229 | }; |
| 230 | |
| 231 | static const intel_limit_t intel_limits_pineview_lvds = { |
| 232 | .dot = { .min = 20000, .max = 400000 }, |
| 233 | .vco = { .min = 1700000, .max = 3500000 }, |
| 234 | .n = { .min = 3, .max = 6 }, |
| 235 | .m = { .min = 2, .max = 256 }, |
| 236 | .m1 = { .min = 0, .max = 0 }, |
| 237 | .m2 = { .min = 0, .max = 254 }, |
| 238 | .p = { .min = 7, .max = 112 }, |
| 239 | .p1 = { .min = 1, .max = 8 }, |
| 240 | .p2 = { .dot_limit = 112000, |
| 241 | .p2_slow = 14, .p2_fast = 14 }, |
| 242 | }; |
| 243 | |
| 244 | /* Ironlake / Sandybridge |
| 245 | * |
| 246 | * We calculate clock using (register_value + 2) for N/M1/M2, so here |
| 247 | * the range value for them is (actual_value - 2). |
| 248 | */ |
| 249 | static const intel_limit_t intel_limits_ironlake_dac = { |
| 250 | .dot = { .min = 25000, .max = 350000 }, |
| 251 | .vco = { .min = 1760000, .max = 3510000 }, |
| 252 | .n = { .min = 1, .max = 5 }, |
| 253 | .m = { .min = 79, .max = 127 }, |
| 254 | .m1 = { .min = 12, .max = 22 }, |
| 255 | .m2 = { .min = 5, .max = 9 }, |
| 256 | .p = { .min = 5, .max = 80 }, |
| 257 | .p1 = { .min = 1, .max = 8 }, |
| 258 | .p2 = { .dot_limit = 225000, |
| 259 | .p2_slow = 10, .p2_fast = 5 }, |
| 260 | }; |
| 261 | |
| 262 | static const intel_limit_t intel_limits_ironlake_single_lvds = { |
| 263 | .dot = { .min = 25000, .max = 350000 }, |
| 264 | .vco = { .min = 1760000, .max = 3510000 }, |
| 265 | .n = { .min = 1, .max = 3 }, |
| 266 | .m = { .min = 79, .max = 118 }, |
| 267 | .m1 = { .min = 12, .max = 22 }, |
| 268 | .m2 = { .min = 5, .max = 9 }, |
| 269 | .p = { .min = 28, .max = 112 }, |
| 270 | .p1 = { .min = 2, .max = 8 }, |
| 271 | .p2 = { .dot_limit = 225000, |
| 272 | .p2_slow = 14, .p2_fast = 14 }, |
| 273 | }; |
| 274 | |
| 275 | static const intel_limit_t intel_limits_ironlake_dual_lvds = { |
| 276 | .dot = { .min = 25000, .max = 350000 }, |
| 277 | .vco = { .min = 1760000, .max = 3510000 }, |
| 278 | .n = { .min = 1, .max = 3 }, |
| 279 | .m = { .min = 79, .max = 127 }, |
| 280 | .m1 = { .min = 12, .max = 22 }, |
| 281 | .m2 = { .min = 5, .max = 9 }, |
| 282 | .p = { .min = 14, .max = 56 }, |
| 283 | .p1 = { .min = 2, .max = 8 }, |
| 284 | .p2 = { .dot_limit = 225000, |
| 285 | .p2_slow = 7, .p2_fast = 7 }, |
| 286 | }; |
| 287 | |
| 288 | /* LVDS 100mhz refclk limits. */ |
| 289 | static const intel_limit_t intel_limits_ironlake_single_lvds_100m = { |
| 290 | .dot = { .min = 25000, .max = 350000 }, |
| 291 | .vco = { .min = 1760000, .max = 3510000 }, |
| 292 | .n = { .min = 1, .max = 2 }, |
| 293 | .m = { .min = 79, .max = 126 }, |
| 294 | .m1 = { .min = 12, .max = 22 }, |
| 295 | .m2 = { .min = 5, .max = 9 }, |
| 296 | .p = { .min = 28, .max = 112 }, |
| 297 | .p1 = { .min = 2, .max = 8 }, |
| 298 | .p2 = { .dot_limit = 225000, |
| 299 | .p2_slow = 14, .p2_fast = 14 }, |
| 300 | }; |
| 301 | |
| 302 | static const intel_limit_t intel_limits_ironlake_dual_lvds_100m = { |
| 303 | .dot = { .min = 25000, .max = 350000 }, |
| 304 | .vco = { .min = 1760000, .max = 3510000 }, |
| 305 | .n = { .min = 1, .max = 3 }, |
| 306 | .m = { .min = 79, .max = 126 }, |
| 307 | .m1 = { .min = 12, .max = 22 }, |
| 308 | .m2 = { .min = 5, .max = 9 }, |
| 309 | .p = { .min = 14, .max = 42 }, |
| 310 | .p1 = { .min = 2, .max = 6 }, |
| 311 | .p2 = { .dot_limit = 225000, |
| 312 | .p2_slow = 7, .p2_fast = 7 }, |
| 313 | }; |
| 314 | |
| 315 | static const intel_limit_t intel_limits_vlv = { |
| 316 | /* |
| 317 | * These are the data rate limits (measured in fast clocks) |
| 318 | * since those are the strictest limits we have. The fast |
| 319 | * clock and actual rate limits are more relaxed, so checking |
| 320 | * them would make no difference. |
| 321 | */ |
| 322 | .dot = { .min = 25000 * 5, .max = 270000 * 5 }, |
| 323 | .vco = { .min = 4000000, .max = 6000000 }, |
| 324 | .n = { .min = 1, .max = 7 }, |
| 325 | .m1 = { .min = 2, .max = 3 }, |
| 326 | .m2 = { .min = 11, .max = 156 }, |
| 327 | .p1 = { .min = 2, .max = 3 }, |
| 328 | .p2 = { .p2_slow = 2, .p2_fast = 20 }, /* slow=min, fast=max */ |
| 329 | }; |
| 330 | |
| 331 | static void vlv_clock(int refclk, intel_clock_t *clock) |
| 332 | { |
| 333 | clock->m = clock->m1 * clock->m2; |
| 334 | clock->p = clock->p1 * clock->p2; |
| 335 | if (WARN_ON(clock->n == 0 || clock->p == 0)) |
| 336 | return; |
| 337 | clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n); |
| 338 | clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p); |
| 339 | } |
| 340 | |
| 341 | /** |
| 342 | * Returns whether any output on the specified pipe is of the specified type |
| 343 | */ |
| 344 | static bool intel_pipe_has_type(struct drm_crtc *crtc, int type) |
| 345 | { |
| 346 | struct drm_device *dev = crtc->dev; |
| 347 | struct intel_encoder *encoder; |
| 348 | |
| 349 | for_each_encoder_on_crtc(dev, crtc, encoder) |
| 350 | if (encoder->type == type) |
| 351 | return true; |
| 352 | |
| 353 | return false; |
| 354 | } |
| 355 | |
| 356 | static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc, |
| 357 | int refclk) |
| 358 | { |
| 359 | struct drm_device *dev = crtc->dev; |
| 360 | const intel_limit_t *limit; |
| 361 | |
| 362 | if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { |
| 363 | if (intel_is_dual_link_lvds(dev)) { |
| 364 | if (refclk == 100000) |
| 365 | limit = &intel_limits_ironlake_dual_lvds_100m; |
| 366 | else |
| 367 | limit = &intel_limits_ironlake_dual_lvds; |
| 368 | } else { |
| 369 | if (refclk == 100000) |
| 370 | limit = &intel_limits_ironlake_single_lvds_100m; |
| 371 | else |
| 372 | limit = &intel_limits_ironlake_single_lvds; |
| 373 | } |
| 374 | } else |
| 375 | limit = &intel_limits_ironlake_dac; |
| 376 | |
| 377 | return limit; |
| 378 | } |
| 379 | |
| 380 | static const intel_limit_t *intel_g4x_limit(struct drm_crtc *crtc) |
| 381 | { |
| 382 | struct drm_device *dev = crtc->dev; |
| 383 | const intel_limit_t *limit; |
| 384 | |
| 385 | if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { |
| 386 | if (intel_is_dual_link_lvds(dev)) |
| 387 | limit = &intel_limits_g4x_dual_channel_lvds; |
| 388 | else |
| 389 | limit = &intel_limits_g4x_single_channel_lvds; |
| 390 | } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI) || |
| 391 | intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG)) { |
| 392 | limit = &intel_limits_g4x_hdmi; |
| 393 | } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) { |
| 394 | limit = &intel_limits_g4x_sdvo; |
| 395 | } else /* The option is for other outputs */ |
| 396 | limit = &intel_limits_i9xx_sdvo; |
| 397 | |
| 398 | return limit; |
| 399 | } |
| 400 | |
| 401 | static const intel_limit_t *intel_limit(struct drm_crtc *crtc, int refclk) |
| 402 | { |
| 403 | struct drm_device *dev = crtc->dev; |
| 404 | const intel_limit_t *limit; |
| 405 | |
| 406 | if (HAS_PCH_SPLIT(dev)) |
| 407 | limit = intel_ironlake_limit(crtc, refclk); |
| 408 | else if (IS_G4X(dev)) { |
| 409 | limit = intel_g4x_limit(crtc); |
| 410 | } else if (IS_PINEVIEW(dev)) { |
| 411 | if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) |
| 412 | limit = &intel_limits_pineview_lvds; |
| 413 | else |
| 414 | limit = &intel_limits_pineview_sdvo; |
| 415 | } else if (IS_VALLEYVIEW(dev)) { |
| 416 | limit = &intel_limits_vlv; |
| 417 | } else if (!IS_GEN2(dev)) { |
| 418 | if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) |
| 419 | limit = &intel_limits_i9xx_lvds; |
| 420 | else |
| 421 | limit = &intel_limits_i9xx_sdvo; |
| 422 | } else { |
| 423 | if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) |
| 424 | limit = &intel_limits_i8xx_lvds; |
| 425 | else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DVO)) |
| 426 | limit = &intel_limits_i8xx_dvo; |
| 427 | else |
| 428 | limit = &intel_limits_i8xx_dac; |
| 429 | } |
| 430 | return limit; |
| 431 | } |
| 432 | |
| 433 | /* m1 is reserved as 0 in Pineview, n is a ring counter */ |
| 434 | static void pineview_clock(int refclk, intel_clock_t *clock) |
| 435 | { |
| 436 | clock->m = clock->m2 + 2; |
| 437 | clock->p = clock->p1 * clock->p2; |
| 438 | if (WARN_ON(clock->n == 0 || clock->p == 0)) |
| 439 | return; |
| 440 | clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n); |
| 441 | clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p); |
| 442 | } |
| 443 | |
| 444 | static uint32_t i9xx_dpll_compute_m(struct dpll *dpll) |
| 445 | { |
| 446 | return 5 * (dpll->m1 + 2) + (dpll->m2 + 2); |
| 447 | } |
| 448 | |
| 449 | static void i9xx_clock(int refclk, intel_clock_t *clock) |
| 450 | { |
| 451 | clock->m = i9xx_dpll_compute_m(clock); |
| 452 | clock->p = clock->p1 * clock->p2; |
| 453 | if (WARN_ON(clock->n + 2 == 0 || clock->p == 0)) |
| 454 | return; |
| 455 | clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n + 2); |
| 456 | clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p); |
| 457 | } |
| 458 | |
| 459 | #define INTELPllInvalid(s) do { /* DRM_DEBUG(s); */ return false; } while (0) |
| 460 | /** |
| 461 | * Returns whether the given set of divisors are valid for a given refclk with |
| 462 | * the given connectors. |
| 463 | */ |
| 464 | |
| 465 | static bool intel_PLL_is_valid(struct drm_device *dev, |
| 466 | const intel_limit_t *limit, |
| 467 | const intel_clock_t *clock) |
| 468 | { |
| 469 | if (clock->n < limit->n.min || limit->n.max < clock->n) |
| 470 | INTELPllInvalid("n out of range\n"); |
| 471 | if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1) |
| 472 | INTELPllInvalid("p1 out of range\n"); |
| 473 | if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2) |
| 474 | INTELPllInvalid("m2 out of range\n"); |
| 475 | if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1) |
| 476 | INTELPllInvalid("m1 out of range\n"); |
| 477 | |
| 478 | if (!IS_PINEVIEW(dev) && !IS_VALLEYVIEW(dev)) |
| 479 | if (clock->m1 <= clock->m2) |
| 480 | INTELPllInvalid("m1 <= m2\n"); |
| 481 | |
| 482 | if (!IS_VALLEYVIEW(dev)) { |
| 483 | if (clock->p < limit->p.min || limit->p.max < clock->p) |
| 484 | INTELPllInvalid("p out of range\n"); |
| 485 | if (clock->m < limit->m.min || limit->m.max < clock->m) |
| 486 | INTELPllInvalid("m out of range\n"); |
| 487 | } |
| 488 | |
| 489 | if (clock->vco < limit->vco.min || limit->vco.max < clock->vco) |
| 490 | INTELPllInvalid("vco out of range\n"); |
| 491 | /* XXX: We may need to be checking "Dot clock" depending on the multiplier, |
| 492 | * connector, etc., rather than just a single range. |
| 493 | */ |
| 494 | if (clock->dot < limit->dot.min || limit->dot.max < clock->dot) |
| 495 | INTELPllInvalid("dot out of range\n"); |
| 496 | |
| 497 | return true; |
| 498 | } |
| 499 | |
| 500 | static bool |
| 501 | i9xx_find_best_dpll(const intel_limit_t *limit, struct drm_crtc *crtc, |
| 502 | int target, int refclk, intel_clock_t *match_clock, |
| 503 | intel_clock_t *best_clock) |
| 504 | { |
| 505 | struct drm_device *dev = crtc->dev; |
| 506 | intel_clock_t clock; |
| 507 | int err = target; |
| 508 | |
| 509 | if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { |
| 510 | /* |
| 511 | * For LVDS just rely on its current settings for dual-channel. |
| 512 | * We haven't figured out how to reliably set up different |
| 513 | * single/dual channel state, if we even can. |
| 514 | */ |
| 515 | if (intel_is_dual_link_lvds(dev)) |
| 516 | clock.p2 = limit->p2.p2_fast; |
| 517 | else |
| 518 | clock.p2 = limit->p2.p2_slow; |
| 519 | } else { |
| 520 | if (target < limit->p2.dot_limit) |
| 521 | clock.p2 = limit->p2.p2_slow; |
| 522 | else |
| 523 | clock.p2 = limit->p2.p2_fast; |
| 524 | } |
| 525 | |
| 526 | memset(best_clock, 0, sizeof(*best_clock)); |
| 527 | |
| 528 | for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; |
| 529 | clock.m1++) { |
| 530 | for (clock.m2 = limit->m2.min; |
| 531 | clock.m2 <= limit->m2.max; clock.m2++) { |
| 532 | if (clock.m2 >= clock.m1) |
| 533 | break; |
| 534 | for (clock.n = limit->n.min; |
| 535 | clock.n <= limit->n.max; clock.n++) { |
| 536 | for (clock.p1 = limit->p1.min; |
| 537 | clock.p1 <= limit->p1.max; clock.p1++) { |
| 538 | int this_err; |
| 539 | |
| 540 | i9xx_clock(refclk, &clock); |
| 541 | if (!intel_PLL_is_valid(dev, limit, |
| 542 | &clock)) |
| 543 | continue; |
| 544 | if (match_clock && |
| 545 | clock.p != match_clock->p) |
| 546 | continue; |
| 547 | |
| 548 | this_err = abs(clock.dot - target); |
| 549 | if (this_err < err) { |
| 550 | *best_clock = clock; |
| 551 | err = this_err; |
| 552 | } |
| 553 | } |
| 554 | } |
| 555 | } |
| 556 | } |
| 557 | |
| 558 | return (err != target); |
| 559 | } |
| 560 | |
| 561 | static bool |
| 562 | pnv_find_best_dpll(const intel_limit_t *limit, struct drm_crtc *crtc, |
| 563 | int target, int refclk, intel_clock_t *match_clock, |
| 564 | intel_clock_t *best_clock) |
| 565 | { |
| 566 | struct drm_device *dev = crtc->dev; |
| 567 | intel_clock_t clock; |
| 568 | int err = target; |
| 569 | |
| 570 | if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { |
| 571 | /* |
| 572 | * For LVDS just rely on its current settings for dual-channel. |
| 573 | * We haven't figured out how to reliably set up different |
| 574 | * single/dual channel state, if we even can. |
| 575 | */ |
| 576 | if (intel_is_dual_link_lvds(dev)) |
| 577 | clock.p2 = limit->p2.p2_fast; |
| 578 | else |
| 579 | clock.p2 = limit->p2.p2_slow; |
| 580 | } else { |
| 581 | if (target < limit->p2.dot_limit) |
| 582 | clock.p2 = limit->p2.p2_slow; |
| 583 | else |
| 584 | clock.p2 = limit->p2.p2_fast; |
| 585 | } |
| 586 | |
| 587 | memset(best_clock, 0, sizeof(*best_clock)); |
| 588 | |
| 589 | for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; |
| 590 | clock.m1++) { |
| 591 | for (clock.m2 = limit->m2.min; |
| 592 | clock.m2 <= limit->m2.max; clock.m2++) { |
| 593 | for (clock.n = limit->n.min; |
| 594 | clock.n <= limit->n.max; clock.n++) { |
| 595 | for (clock.p1 = limit->p1.min; |
| 596 | clock.p1 <= limit->p1.max; clock.p1++) { |
| 597 | int this_err; |
| 598 | |
| 599 | pineview_clock(refclk, &clock); |
| 600 | if (!intel_PLL_is_valid(dev, limit, |
| 601 | &clock)) |
| 602 | continue; |
| 603 | if (match_clock && |
| 604 | clock.p != match_clock->p) |
| 605 | continue; |
| 606 | |
| 607 | this_err = abs(clock.dot - target); |
| 608 | if (this_err < err) { |
| 609 | *best_clock = clock; |
| 610 | err = this_err; |
| 611 | } |
| 612 | } |
| 613 | } |
| 614 | } |
| 615 | } |
| 616 | |
| 617 | return (err != target); |
| 618 | } |
| 619 | |
| 620 | static bool |
| 621 | g4x_find_best_dpll(const intel_limit_t *limit, struct drm_crtc *crtc, |
| 622 | int target, int refclk, intel_clock_t *match_clock, |
| 623 | intel_clock_t *best_clock) |
| 624 | { |
| 625 | struct drm_device *dev = crtc->dev; |
| 626 | intel_clock_t clock; |
| 627 | int max_n; |
| 628 | bool found; |
| 629 | /* approximately equals target * 0.00585 */ |
| 630 | int err_most = (target >> 8) + (target >> 9); |
| 631 | found = false; |
| 632 | |
| 633 | if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { |
| 634 | if (intel_is_dual_link_lvds(dev)) |
| 635 | clock.p2 = limit->p2.p2_fast; |
| 636 | else |
| 637 | clock.p2 = limit->p2.p2_slow; |
| 638 | } else { |
| 639 | if (target < limit->p2.dot_limit) |
| 640 | clock.p2 = limit->p2.p2_slow; |
| 641 | else |
| 642 | clock.p2 = limit->p2.p2_fast; |
| 643 | } |
| 644 | |
| 645 | memset(best_clock, 0, sizeof(*best_clock)); |
| 646 | max_n = limit->n.max; |
| 647 | /* based on hardware requirement, prefer smaller n to precision */ |
| 648 | for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) { |
| 649 | /* based on hardware requirement, prefere larger m1,m2 */ |
| 650 | for (clock.m1 = limit->m1.max; |
| 651 | clock.m1 >= limit->m1.min; clock.m1--) { |
| 652 | for (clock.m2 = limit->m2.max; |
| 653 | clock.m2 >= limit->m2.min; clock.m2--) { |
| 654 | for (clock.p1 = limit->p1.max; |
| 655 | clock.p1 >= limit->p1.min; clock.p1--) { |
| 656 | int this_err; |
| 657 | |
| 658 | i9xx_clock(refclk, &clock); |
| 659 | if (!intel_PLL_is_valid(dev, limit, |
| 660 | &clock)) |
| 661 | continue; |
| 662 | |
| 663 | this_err = abs(clock.dot - target); |
| 664 | if (this_err < err_most) { |
| 665 | *best_clock = clock; |
| 666 | err_most = this_err; |
| 667 | max_n = clock.n; |
| 668 | found = true; |
| 669 | } |
| 670 | } |
| 671 | } |
| 672 | } |
| 673 | } |
| 674 | return found; |
| 675 | } |
| 676 | |
| 677 | static bool |
| 678 | vlv_find_best_dpll(const intel_limit_t *limit, struct drm_crtc *crtc, |
| 679 | int target, int refclk, intel_clock_t *match_clock, |
| 680 | intel_clock_t *best_clock) |
| 681 | { |
| 682 | struct drm_device *dev = crtc->dev; |
| 683 | intel_clock_t clock; |
| 684 | unsigned int bestppm = 1000000; |
| 685 | /* min update 19.2 MHz */ |
| 686 | int max_n = min(limit->n.max, refclk / 19200); |
| 687 | bool found = false; |
| 688 | |
| 689 | target *= 5; /* fast clock */ |
| 690 | |
| 691 | memset(best_clock, 0, sizeof(*best_clock)); |
| 692 | |
| 693 | /* based on hardware requirement, prefer smaller n to precision */ |
| 694 | for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) { |
| 695 | for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) { |
| 696 | for (clock.p2 = limit->p2.p2_fast; clock.p2 >= limit->p2.p2_slow; |
| 697 | clock.p2 -= clock.p2 > 10 ? 2 : 1) { |
| 698 | clock.p = clock.p1 * clock.p2; |
| 699 | /* based on hardware requirement, prefer bigger m1,m2 values */ |
| 700 | for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) { |
| 701 | unsigned int ppm, diff; |
| 702 | |
| 703 | clock.m2 = DIV_ROUND_CLOSEST(target * clock.p * clock.n, |
| 704 | refclk * clock.m1); |
| 705 | |
| 706 | vlv_clock(refclk, &clock); |
| 707 | |
| 708 | if (!intel_PLL_is_valid(dev, limit, |
| 709 | &clock)) |
| 710 | continue; |
| 711 | |
| 712 | diff = abs(clock.dot - target); |
| 713 | ppm = div_u64(1000000ULL * diff, target); |
| 714 | |
| 715 | if (ppm < 100 && clock.p > best_clock->p) { |
| 716 | bestppm = 0; |
| 717 | *best_clock = clock; |
| 718 | found = true; |
| 719 | } |
| 720 | |
| 721 | if (bestppm >= 10 && ppm < bestppm - 10) { |
| 722 | bestppm = ppm; |
| 723 | *best_clock = clock; |
| 724 | found = true; |
| 725 | } |
| 726 | } |
| 727 | } |
| 728 | } |
| 729 | } |
| 730 | |
| 731 | return found; |
| 732 | } |
| 733 | |
| 734 | bool intel_crtc_active(struct drm_crtc *crtc) |
| 735 | { |
| 736 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 737 | |
| 738 | /* Be paranoid as we can arrive here with only partial |
| 739 | * state retrieved from the hardware during setup. |
| 740 | * |
| 741 | * We can ditch the adjusted_mode.crtc_clock check as soon |
| 742 | * as Haswell has gained clock readout/fastboot support. |
| 743 | * |
| 744 | * We can ditch the crtc->fb check as soon as we can |
| 745 | * properly reconstruct framebuffers. |
| 746 | */ |
| 747 | return intel_crtc->active && crtc->fb && |
| 748 | intel_crtc->config.adjusted_mode.crtc_clock; |
| 749 | } |
| 750 | |
| 751 | enum transcoder intel_pipe_to_cpu_transcoder(struct drm_i915_private *dev_priv, |
| 752 | enum pipe pipe) |
| 753 | { |
| 754 | struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe]; |
| 755 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 756 | |
| 757 | return intel_crtc->config.cpu_transcoder; |
| 758 | } |
| 759 | |
| 760 | static void g4x_wait_for_vblank(struct drm_device *dev, int pipe) |
| 761 | { |
| 762 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 763 | u32 frame, frame_reg = PIPE_FRMCOUNT_GM45(pipe); |
| 764 | |
| 765 | frame = I915_READ(frame_reg); |
| 766 | |
| 767 | if (wait_for(I915_READ_NOTRACE(frame_reg) != frame, 50)) |
| 768 | DRM_DEBUG_KMS("vblank wait timed out\n"); |
| 769 | } |
| 770 | |
| 771 | /** |
| 772 | * intel_wait_for_vblank - wait for vblank on a given pipe |
| 773 | * @dev: drm device |
| 774 | * @pipe: pipe to wait for |
| 775 | * |
| 776 | * Wait for vblank to occur on a given pipe. Needed for various bits of |
| 777 | * mode setting code. |
| 778 | */ |
| 779 | void intel_wait_for_vblank(struct drm_device *dev, int pipe) |
| 780 | { |
| 781 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 782 | int pipestat_reg = PIPESTAT(pipe); |
| 783 | |
| 784 | if (IS_G4X(dev) || INTEL_INFO(dev)->gen >= 5) { |
| 785 | g4x_wait_for_vblank(dev, pipe); |
| 786 | return; |
| 787 | } |
| 788 | |
| 789 | /* Clear existing vblank status. Note this will clear any other |
| 790 | * sticky status fields as well. |
| 791 | * |
| 792 | * This races with i915_driver_irq_handler() with the result |
| 793 | * that either function could miss a vblank event. Here it is not |
| 794 | * fatal, as we will either wait upon the next vblank interrupt or |
| 795 | * timeout. Generally speaking intel_wait_for_vblank() is only |
| 796 | * called during modeset at which time the GPU should be idle and |
| 797 | * should *not* be performing page flips and thus not waiting on |
| 798 | * vblanks... |
| 799 | * Currently, the result of us stealing a vblank from the irq |
| 800 | * handler is that a single frame will be skipped during swapbuffers. |
| 801 | */ |
| 802 | I915_WRITE(pipestat_reg, |
| 803 | I915_READ(pipestat_reg) | PIPE_VBLANK_INTERRUPT_STATUS); |
| 804 | |
| 805 | /* Wait for vblank interrupt bit to set */ |
| 806 | if (wait_for(I915_READ(pipestat_reg) & |
| 807 | PIPE_VBLANK_INTERRUPT_STATUS, |
| 808 | 50)) |
| 809 | DRM_DEBUG_KMS("vblank wait timed out\n"); |
| 810 | } |
| 811 | |
| 812 | static bool pipe_dsl_stopped(struct drm_device *dev, enum pipe pipe) |
| 813 | { |
| 814 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 815 | u32 reg = PIPEDSL(pipe); |
| 816 | u32 line1, line2; |
| 817 | u32 line_mask; |
| 818 | |
| 819 | if (IS_GEN2(dev)) |
| 820 | line_mask = DSL_LINEMASK_GEN2; |
| 821 | else |
| 822 | line_mask = DSL_LINEMASK_GEN3; |
| 823 | |
| 824 | line1 = I915_READ(reg) & line_mask; |
| 825 | mdelay(5); |
| 826 | line2 = I915_READ(reg) & line_mask; |
| 827 | |
| 828 | return line1 == line2; |
| 829 | } |
| 830 | |
| 831 | /* |
| 832 | * intel_wait_for_pipe_off - wait for pipe to turn off |
| 833 | * @dev: drm device |
| 834 | * @pipe: pipe to wait for |
| 835 | * |
| 836 | * After disabling a pipe, we can't wait for vblank in the usual way, |
| 837 | * spinning on the vblank interrupt status bit, since we won't actually |
| 838 | * see an interrupt when the pipe is disabled. |
| 839 | * |
| 840 | * On Gen4 and above: |
| 841 | * wait for the pipe register state bit to turn off |
| 842 | * |
| 843 | * Otherwise: |
| 844 | * wait for the display line value to settle (it usually |
| 845 | * ends up stopping at the start of the next frame). |
| 846 | * |
| 847 | */ |
| 848 | void intel_wait_for_pipe_off(struct drm_device *dev, int pipe) |
| 849 | { |
| 850 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 851 | enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv, |
| 852 | pipe); |
| 853 | |
| 854 | if (INTEL_INFO(dev)->gen >= 4) { |
| 855 | int reg = PIPECONF(cpu_transcoder); |
| 856 | |
| 857 | /* Wait for the Pipe State to go off */ |
| 858 | if (wait_for((I915_READ(reg) & I965_PIPECONF_ACTIVE) == 0, |
| 859 | 100)) |
| 860 | WARN(1, "pipe_off wait timed out\n"); |
| 861 | } else { |
| 862 | /* Wait for the display line to settle */ |
| 863 | if (wait_for(pipe_dsl_stopped(dev, pipe), 100)) |
| 864 | WARN(1, "pipe_off wait timed out\n"); |
| 865 | } |
| 866 | } |
| 867 | |
| 868 | /* |
| 869 | * ibx_digital_port_connected - is the specified port connected? |
| 870 | * @dev_priv: i915 private structure |
| 871 | * @port: the port to test |
| 872 | * |
| 873 | * Returns true if @port is connected, false otherwise. |
| 874 | */ |
| 875 | bool ibx_digital_port_connected(struct drm_i915_private *dev_priv, |
| 876 | struct intel_digital_port *port) |
| 877 | { |
| 878 | u32 bit; |
| 879 | |
| 880 | if (HAS_PCH_IBX(dev_priv->dev)) { |
| 881 | switch(port->port) { |
| 882 | case PORT_B: |
| 883 | bit = SDE_PORTB_HOTPLUG; |
| 884 | break; |
| 885 | case PORT_C: |
| 886 | bit = SDE_PORTC_HOTPLUG; |
| 887 | break; |
| 888 | case PORT_D: |
| 889 | bit = SDE_PORTD_HOTPLUG; |
| 890 | break; |
| 891 | default: |
| 892 | return true; |
| 893 | } |
| 894 | } else { |
| 895 | switch(port->port) { |
| 896 | case PORT_B: |
| 897 | bit = SDE_PORTB_HOTPLUG_CPT; |
| 898 | break; |
| 899 | case PORT_C: |
| 900 | bit = SDE_PORTC_HOTPLUG_CPT; |
| 901 | break; |
| 902 | case PORT_D: |
| 903 | bit = SDE_PORTD_HOTPLUG_CPT; |
| 904 | break; |
| 905 | default: |
| 906 | return true; |
| 907 | } |
| 908 | } |
| 909 | |
| 910 | return I915_READ(SDEISR) & bit; |
| 911 | } |
| 912 | |
| 913 | static const char *state_string(bool enabled) |
| 914 | { |
| 915 | return enabled ? "on" : "off"; |
| 916 | } |
| 917 | |
| 918 | /* Only for pre-ILK configs */ |
| 919 | void assert_pll(struct drm_i915_private *dev_priv, |
| 920 | enum pipe pipe, bool state) |
| 921 | { |
| 922 | int reg; |
| 923 | u32 val; |
| 924 | bool cur_state; |
| 925 | |
| 926 | reg = DPLL(pipe); |
| 927 | val = I915_READ(reg); |
| 928 | cur_state = !!(val & DPLL_VCO_ENABLE); |
| 929 | WARN(cur_state != state, |
| 930 | "PLL state assertion failure (expected %s, current %s)\n", |
| 931 | state_string(state), state_string(cur_state)); |
| 932 | } |
| 933 | |
| 934 | /* XXX: the dsi pll is shared between MIPI DSI ports */ |
| 935 | static void assert_dsi_pll(struct drm_i915_private *dev_priv, bool state) |
| 936 | { |
| 937 | u32 val; |
| 938 | bool cur_state; |
| 939 | |
| 940 | mutex_lock(&dev_priv->dpio_lock); |
| 941 | val = vlv_cck_read(dev_priv, CCK_REG_DSI_PLL_CONTROL); |
| 942 | mutex_unlock(&dev_priv->dpio_lock); |
| 943 | |
| 944 | cur_state = val & DSI_PLL_VCO_EN; |
| 945 | WARN(cur_state != state, |
| 946 | "DSI PLL state assertion failure (expected %s, current %s)\n", |
| 947 | state_string(state), state_string(cur_state)); |
| 948 | } |
| 949 | #define assert_dsi_pll_enabled(d) assert_dsi_pll(d, true) |
| 950 | #define assert_dsi_pll_disabled(d) assert_dsi_pll(d, false) |
| 951 | |
| 952 | struct intel_shared_dpll * |
| 953 | intel_crtc_to_shared_dpll(struct intel_crtc *crtc) |
| 954 | { |
| 955 | struct drm_i915_private *dev_priv = crtc->base.dev->dev_private; |
| 956 | |
| 957 | if (crtc->config.shared_dpll < 0) |
| 958 | return NULL; |
| 959 | |
| 960 | return &dev_priv->shared_dplls[crtc->config.shared_dpll]; |
| 961 | } |
| 962 | |
| 963 | /* For ILK+ */ |
| 964 | void assert_shared_dpll(struct drm_i915_private *dev_priv, |
| 965 | struct intel_shared_dpll *pll, |
| 966 | bool state) |
| 967 | { |
| 968 | bool cur_state; |
| 969 | struct intel_dpll_hw_state hw_state; |
| 970 | |
| 971 | if (HAS_PCH_LPT(dev_priv->dev)) { |
| 972 | DRM_DEBUG_DRIVER("LPT detected: skipping PCH PLL test\n"); |
| 973 | return; |
| 974 | } |
| 975 | |
| 976 | if (WARN (!pll, |
| 977 | "asserting DPLL %s with no DPLL\n", state_string(state))) |
| 978 | return; |
| 979 | |
| 980 | cur_state = pll->get_hw_state(dev_priv, pll, &hw_state); |
| 981 | WARN(cur_state != state, |
| 982 | "%s assertion failure (expected %s, current %s)\n", |
| 983 | pll->name, state_string(state), state_string(cur_state)); |
| 984 | } |
| 985 | |
| 986 | static void assert_fdi_tx(struct drm_i915_private *dev_priv, |
| 987 | enum pipe pipe, bool state) |
| 988 | { |
| 989 | int reg; |
| 990 | u32 val; |
| 991 | bool cur_state; |
| 992 | enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv, |
| 993 | pipe); |
| 994 | |
| 995 | if (HAS_DDI(dev_priv->dev)) { |
| 996 | /* DDI does not have a specific FDI_TX register */ |
| 997 | reg = TRANS_DDI_FUNC_CTL(cpu_transcoder); |
| 998 | val = I915_READ(reg); |
| 999 | cur_state = !!(val & TRANS_DDI_FUNC_ENABLE); |
| 1000 | } else { |
| 1001 | reg = FDI_TX_CTL(pipe); |
| 1002 | val = I915_READ(reg); |
| 1003 | cur_state = !!(val & FDI_TX_ENABLE); |
| 1004 | } |
| 1005 | WARN(cur_state != state, |
| 1006 | "FDI TX state assertion failure (expected %s, current %s)\n", |
| 1007 | state_string(state), state_string(cur_state)); |
| 1008 | } |
| 1009 | #define assert_fdi_tx_enabled(d, p) assert_fdi_tx(d, p, true) |
| 1010 | #define assert_fdi_tx_disabled(d, p) assert_fdi_tx(d, p, false) |
| 1011 | |
| 1012 | static void assert_fdi_rx(struct drm_i915_private *dev_priv, |
| 1013 | enum pipe pipe, bool state) |
| 1014 | { |
| 1015 | int reg; |
| 1016 | u32 val; |
| 1017 | bool cur_state; |
| 1018 | |
| 1019 | reg = FDI_RX_CTL(pipe); |
| 1020 | val = I915_READ(reg); |
| 1021 | cur_state = !!(val & FDI_RX_ENABLE); |
| 1022 | WARN(cur_state != state, |
| 1023 | "FDI RX state assertion failure (expected %s, current %s)\n", |
| 1024 | state_string(state), state_string(cur_state)); |
| 1025 | } |
| 1026 | #define assert_fdi_rx_enabled(d, p) assert_fdi_rx(d, p, true) |
| 1027 | #define assert_fdi_rx_disabled(d, p) assert_fdi_rx(d, p, false) |
| 1028 | |
| 1029 | static void assert_fdi_tx_pll_enabled(struct drm_i915_private *dev_priv, |
| 1030 | enum pipe pipe) |
| 1031 | { |
| 1032 | int reg; |
| 1033 | u32 val; |
| 1034 | |
| 1035 | /* ILK FDI PLL is always enabled */ |
| 1036 | if (INTEL_INFO(dev_priv->dev)->gen == 5) |
| 1037 | return; |
| 1038 | |
| 1039 | /* On Haswell, DDI ports are responsible for the FDI PLL setup */ |
| 1040 | if (HAS_DDI(dev_priv->dev)) |
| 1041 | return; |
| 1042 | |
| 1043 | reg = FDI_TX_CTL(pipe); |
| 1044 | val = I915_READ(reg); |
| 1045 | WARN(!(val & FDI_TX_PLL_ENABLE), "FDI TX PLL assertion failure, should be active but is disabled\n"); |
| 1046 | } |
| 1047 | |
| 1048 | void assert_fdi_rx_pll(struct drm_i915_private *dev_priv, |
| 1049 | enum pipe pipe, bool state) |
| 1050 | { |
| 1051 | int reg; |
| 1052 | u32 val; |
| 1053 | bool cur_state; |
| 1054 | |
| 1055 | reg = FDI_RX_CTL(pipe); |
| 1056 | val = I915_READ(reg); |
| 1057 | cur_state = !!(val & FDI_RX_PLL_ENABLE); |
| 1058 | WARN(cur_state != state, |
| 1059 | "FDI RX PLL assertion failure (expected %s, current %s)\n", |
| 1060 | state_string(state), state_string(cur_state)); |
| 1061 | } |
| 1062 | |
| 1063 | static void assert_panel_unlocked(struct drm_i915_private *dev_priv, |
| 1064 | enum pipe pipe) |
| 1065 | { |
| 1066 | int pp_reg, lvds_reg; |
| 1067 | u32 val; |
| 1068 | enum pipe panel_pipe = PIPE_A; |
| 1069 | bool locked = true; |
| 1070 | |
| 1071 | if (HAS_PCH_SPLIT(dev_priv->dev)) { |
| 1072 | pp_reg = PCH_PP_CONTROL; |
| 1073 | lvds_reg = PCH_LVDS; |
| 1074 | } else { |
| 1075 | pp_reg = PP_CONTROL; |
| 1076 | lvds_reg = LVDS; |
| 1077 | } |
| 1078 | |
| 1079 | val = I915_READ(pp_reg); |
| 1080 | if (!(val & PANEL_POWER_ON) || |
| 1081 | ((val & PANEL_UNLOCK_REGS) == PANEL_UNLOCK_REGS)) |
| 1082 | locked = false; |
| 1083 | |
| 1084 | if (I915_READ(lvds_reg) & LVDS_PIPEB_SELECT) |
| 1085 | panel_pipe = PIPE_B; |
| 1086 | |
| 1087 | WARN(panel_pipe == pipe && locked, |
| 1088 | "panel assertion failure, pipe %c regs locked\n", |
| 1089 | pipe_name(pipe)); |
| 1090 | } |
| 1091 | |
| 1092 | static void assert_cursor(struct drm_i915_private *dev_priv, |
| 1093 | enum pipe pipe, bool state) |
| 1094 | { |
| 1095 | struct drm_device *dev = dev_priv->dev; |
| 1096 | bool cur_state; |
| 1097 | |
| 1098 | if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev)) |
| 1099 | cur_state = I915_READ(CURCNTR_IVB(pipe)) & CURSOR_MODE; |
| 1100 | else if (IS_845G(dev) || IS_I865G(dev)) |
| 1101 | cur_state = I915_READ(_CURACNTR) & CURSOR_ENABLE; |
| 1102 | else |
| 1103 | cur_state = I915_READ(CURCNTR(pipe)) & CURSOR_MODE; |
| 1104 | |
| 1105 | WARN(cur_state != state, |
| 1106 | "cursor on pipe %c assertion failure (expected %s, current %s)\n", |
| 1107 | pipe_name(pipe), state_string(state), state_string(cur_state)); |
| 1108 | } |
| 1109 | #define assert_cursor_enabled(d, p) assert_cursor(d, p, true) |
| 1110 | #define assert_cursor_disabled(d, p) assert_cursor(d, p, false) |
| 1111 | |
| 1112 | void assert_pipe(struct drm_i915_private *dev_priv, |
| 1113 | enum pipe pipe, bool state) |
| 1114 | { |
| 1115 | int reg; |
| 1116 | u32 val; |
| 1117 | bool cur_state; |
| 1118 | enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv, |
| 1119 | pipe); |
| 1120 | |
| 1121 | /* if we need the pipe A quirk it must be always on */ |
| 1122 | if (pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) |
| 1123 | state = true; |
| 1124 | |
| 1125 | if (!intel_display_power_enabled(dev_priv, |
| 1126 | POWER_DOMAIN_TRANSCODER(cpu_transcoder))) { |
| 1127 | cur_state = false; |
| 1128 | } else { |
| 1129 | reg = PIPECONF(cpu_transcoder); |
| 1130 | val = I915_READ(reg); |
| 1131 | cur_state = !!(val & PIPECONF_ENABLE); |
| 1132 | } |
| 1133 | |
| 1134 | WARN(cur_state != state, |
| 1135 | "pipe %c assertion failure (expected %s, current %s)\n", |
| 1136 | pipe_name(pipe), state_string(state), state_string(cur_state)); |
| 1137 | } |
| 1138 | |
| 1139 | static void assert_plane(struct drm_i915_private *dev_priv, |
| 1140 | enum plane plane, bool state) |
| 1141 | { |
| 1142 | int reg; |
| 1143 | u32 val; |
| 1144 | bool cur_state; |
| 1145 | |
| 1146 | reg = DSPCNTR(plane); |
| 1147 | val = I915_READ(reg); |
| 1148 | cur_state = !!(val & DISPLAY_PLANE_ENABLE); |
| 1149 | WARN(cur_state != state, |
| 1150 | "plane %c assertion failure (expected %s, current %s)\n", |
| 1151 | plane_name(plane), state_string(state), state_string(cur_state)); |
| 1152 | } |
| 1153 | |
| 1154 | #define assert_plane_enabled(d, p) assert_plane(d, p, true) |
| 1155 | #define assert_plane_disabled(d, p) assert_plane(d, p, false) |
| 1156 | |
| 1157 | static void assert_planes_disabled(struct drm_i915_private *dev_priv, |
| 1158 | enum pipe pipe) |
| 1159 | { |
| 1160 | struct drm_device *dev = dev_priv->dev; |
| 1161 | int reg, i; |
| 1162 | u32 val; |
| 1163 | int cur_pipe; |
| 1164 | |
| 1165 | /* Primary planes are fixed to pipes on gen4+ */ |
| 1166 | if (INTEL_INFO(dev)->gen >= 4) { |
| 1167 | reg = DSPCNTR(pipe); |
| 1168 | val = I915_READ(reg); |
| 1169 | WARN((val & DISPLAY_PLANE_ENABLE), |
| 1170 | "plane %c assertion failure, should be disabled but not\n", |
| 1171 | plane_name(pipe)); |
| 1172 | return; |
| 1173 | } |
| 1174 | |
| 1175 | /* Need to check both planes against the pipe */ |
| 1176 | for_each_pipe(i) { |
| 1177 | reg = DSPCNTR(i); |
| 1178 | val = I915_READ(reg); |
| 1179 | cur_pipe = (val & DISPPLANE_SEL_PIPE_MASK) >> |
| 1180 | DISPPLANE_SEL_PIPE_SHIFT; |
| 1181 | WARN((val & DISPLAY_PLANE_ENABLE) && pipe == cur_pipe, |
| 1182 | "plane %c assertion failure, should be off on pipe %c but is still active\n", |
| 1183 | plane_name(i), pipe_name(pipe)); |
| 1184 | } |
| 1185 | } |
| 1186 | |
| 1187 | static void assert_sprites_disabled(struct drm_i915_private *dev_priv, |
| 1188 | enum pipe pipe) |
| 1189 | { |
| 1190 | struct drm_device *dev = dev_priv->dev; |
| 1191 | int reg, sprite; |
| 1192 | u32 val; |
| 1193 | |
| 1194 | if (IS_VALLEYVIEW(dev)) { |
| 1195 | for_each_sprite(pipe, sprite) { |
| 1196 | reg = SPCNTR(pipe, sprite); |
| 1197 | val = I915_READ(reg); |
| 1198 | WARN((val & SP_ENABLE), |
| 1199 | "sprite %c assertion failure, should be off on pipe %c but is still active\n", |
| 1200 | sprite_name(pipe, sprite), pipe_name(pipe)); |
| 1201 | } |
| 1202 | } else if (INTEL_INFO(dev)->gen >= 7) { |
| 1203 | reg = SPRCTL(pipe); |
| 1204 | val = I915_READ(reg); |
| 1205 | WARN((val & SPRITE_ENABLE), |
| 1206 | "sprite %c assertion failure, should be off on pipe %c but is still active\n", |
| 1207 | plane_name(pipe), pipe_name(pipe)); |
| 1208 | } else if (INTEL_INFO(dev)->gen >= 5) { |
| 1209 | reg = DVSCNTR(pipe); |
| 1210 | val = I915_READ(reg); |
| 1211 | WARN((val & DVS_ENABLE), |
| 1212 | "sprite %c assertion failure, should be off on pipe %c but is still active\n", |
| 1213 | plane_name(pipe), pipe_name(pipe)); |
| 1214 | } |
| 1215 | } |
| 1216 | |
| 1217 | static void ibx_assert_pch_refclk_enabled(struct drm_i915_private *dev_priv) |
| 1218 | { |
| 1219 | u32 val; |
| 1220 | bool enabled; |
| 1221 | |
| 1222 | WARN_ON(!(HAS_PCH_IBX(dev_priv->dev) || HAS_PCH_CPT(dev_priv->dev))); |
| 1223 | |
| 1224 | val = I915_READ(PCH_DREF_CONTROL); |
| 1225 | enabled = !!(val & (DREF_SSC_SOURCE_MASK | DREF_NONSPREAD_SOURCE_MASK | |
| 1226 | DREF_SUPERSPREAD_SOURCE_MASK)); |
| 1227 | WARN(!enabled, "PCH refclk assertion failure, should be active but is disabled\n"); |
| 1228 | } |
| 1229 | |
| 1230 | static void assert_pch_transcoder_disabled(struct drm_i915_private *dev_priv, |
| 1231 | enum pipe pipe) |
| 1232 | { |
| 1233 | int reg; |
| 1234 | u32 val; |
| 1235 | bool enabled; |
| 1236 | |
| 1237 | reg = PCH_TRANSCONF(pipe); |
| 1238 | val = I915_READ(reg); |
| 1239 | enabled = !!(val & TRANS_ENABLE); |
| 1240 | WARN(enabled, |
| 1241 | "transcoder assertion failed, should be off on pipe %c but is still active\n", |
| 1242 | pipe_name(pipe)); |
| 1243 | } |
| 1244 | |
| 1245 | static bool dp_pipe_enabled(struct drm_i915_private *dev_priv, |
| 1246 | enum pipe pipe, u32 port_sel, u32 val) |
| 1247 | { |
| 1248 | if ((val & DP_PORT_EN) == 0) |
| 1249 | return false; |
| 1250 | |
| 1251 | if (HAS_PCH_CPT(dev_priv->dev)) { |
| 1252 | u32 trans_dp_ctl_reg = TRANS_DP_CTL(pipe); |
| 1253 | u32 trans_dp_ctl = I915_READ(trans_dp_ctl_reg); |
| 1254 | if ((trans_dp_ctl & TRANS_DP_PORT_SEL_MASK) != port_sel) |
| 1255 | return false; |
| 1256 | } else { |
| 1257 | if ((val & DP_PIPE_MASK) != (pipe << 30)) |
| 1258 | return false; |
| 1259 | } |
| 1260 | return true; |
| 1261 | } |
| 1262 | |
| 1263 | static bool hdmi_pipe_enabled(struct drm_i915_private *dev_priv, |
| 1264 | enum pipe pipe, u32 val) |
| 1265 | { |
| 1266 | if ((val & SDVO_ENABLE) == 0) |
| 1267 | return false; |
| 1268 | |
| 1269 | if (HAS_PCH_CPT(dev_priv->dev)) { |
| 1270 | if ((val & SDVO_PIPE_SEL_MASK_CPT) != SDVO_PIPE_SEL_CPT(pipe)) |
| 1271 | return false; |
| 1272 | } else { |
| 1273 | if ((val & SDVO_PIPE_SEL_MASK) != SDVO_PIPE_SEL(pipe)) |
| 1274 | return false; |
| 1275 | } |
| 1276 | return true; |
| 1277 | } |
| 1278 | |
| 1279 | static bool lvds_pipe_enabled(struct drm_i915_private *dev_priv, |
| 1280 | enum pipe pipe, u32 val) |
| 1281 | { |
| 1282 | if ((val & LVDS_PORT_EN) == 0) |
| 1283 | return false; |
| 1284 | |
| 1285 | if (HAS_PCH_CPT(dev_priv->dev)) { |
| 1286 | if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe)) |
| 1287 | return false; |
| 1288 | } else { |
| 1289 | if ((val & LVDS_PIPE_MASK) != LVDS_PIPE(pipe)) |
| 1290 | return false; |
| 1291 | } |
| 1292 | return true; |
| 1293 | } |
| 1294 | |
| 1295 | static bool adpa_pipe_enabled(struct drm_i915_private *dev_priv, |
| 1296 | enum pipe pipe, u32 val) |
| 1297 | { |
| 1298 | if ((val & ADPA_DAC_ENABLE) == 0) |
| 1299 | return false; |
| 1300 | if (HAS_PCH_CPT(dev_priv->dev)) { |
| 1301 | if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe)) |
| 1302 | return false; |
| 1303 | } else { |
| 1304 | if ((val & ADPA_PIPE_SELECT_MASK) != ADPA_PIPE_SELECT(pipe)) |
| 1305 | return false; |
| 1306 | } |
| 1307 | return true; |
| 1308 | } |
| 1309 | |
| 1310 | static void assert_pch_dp_disabled(struct drm_i915_private *dev_priv, |
| 1311 | enum pipe pipe, int reg, u32 port_sel) |
| 1312 | { |
| 1313 | u32 val = I915_READ(reg); |
| 1314 | WARN(dp_pipe_enabled(dev_priv, pipe, port_sel, val), |
| 1315 | "PCH DP (0x%08x) enabled on transcoder %c, should be disabled\n", |
| 1316 | reg, pipe_name(pipe)); |
| 1317 | |
| 1318 | WARN(HAS_PCH_IBX(dev_priv->dev) && (val & DP_PORT_EN) == 0 |
| 1319 | && (val & DP_PIPEB_SELECT), |
| 1320 | "IBX PCH dp port still using transcoder B\n"); |
| 1321 | } |
| 1322 | |
| 1323 | static void assert_pch_hdmi_disabled(struct drm_i915_private *dev_priv, |
| 1324 | enum pipe pipe, int reg) |
| 1325 | { |
| 1326 | u32 val = I915_READ(reg); |
| 1327 | WARN(hdmi_pipe_enabled(dev_priv, pipe, val), |
| 1328 | "PCH HDMI (0x%08x) enabled on transcoder %c, should be disabled\n", |
| 1329 | reg, pipe_name(pipe)); |
| 1330 | |
| 1331 | WARN(HAS_PCH_IBX(dev_priv->dev) && (val & SDVO_ENABLE) == 0 |
| 1332 | && (val & SDVO_PIPE_B_SELECT), |
| 1333 | "IBX PCH hdmi port still using transcoder B\n"); |
| 1334 | } |
| 1335 | |
| 1336 | static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv, |
| 1337 | enum pipe pipe) |
| 1338 | { |
| 1339 | int reg; |
| 1340 | u32 val; |
| 1341 | |
| 1342 | assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_B, TRANS_DP_PORT_SEL_B); |
| 1343 | assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_C, TRANS_DP_PORT_SEL_C); |
| 1344 | assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_D, TRANS_DP_PORT_SEL_D); |
| 1345 | |
| 1346 | reg = PCH_ADPA; |
| 1347 | val = I915_READ(reg); |
| 1348 | WARN(adpa_pipe_enabled(dev_priv, pipe, val), |
| 1349 | "PCH VGA enabled on transcoder %c, should be disabled\n", |
| 1350 | pipe_name(pipe)); |
| 1351 | |
| 1352 | reg = PCH_LVDS; |
| 1353 | val = I915_READ(reg); |
| 1354 | WARN(lvds_pipe_enabled(dev_priv, pipe, val), |
| 1355 | "PCH LVDS enabled on transcoder %c, should be disabled\n", |
| 1356 | pipe_name(pipe)); |
| 1357 | |
| 1358 | assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMIB); |
| 1359 | assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMIC); |
| 1360 | assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMID); |
| 1361 | } |
| 1362 | |
| 1363 | static void intel_init_dpio(struct drm_device *dev) |
| 1364 | { |
| 1365 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 1366 | |
| 1367 | if (!IS_VALLEYVIEW(dev)) |
| 1368 | return; |
| 1369 | |
| 1370 | DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO; |
| 1371 | } |
| 1372 | |
| 1373 | static void intel_reset_dpio(struct drm_device *dev) |
| 1374 | { |
| 1375 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 1376 | |
| 1377 | if (!IS_VALLEYVIEW(dev)) |
| 1378 | return; |
| 1379 | |
| 1380 | /* |
| 1381 | * Enable the CRI clock source so we can get at the display and the |
| 1382 | * reference clock for VGA hotplug / manual detection. |
| 1383 | */ |
| 1384 | I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) | |
| 1385 | DPLL_REFA_CLK_ENABLE_VLV | |
| 1386 | DPLL_INTEGRATED_CRI_CLK_VLV); |
| 1387 | |
| 1388 | /* |
| 1389 | * From VLV2A0_DP_eDP_DPIO_driver_vbios_notes_10.docx - |
| 1390 | * 6. De-assert cmn_reset/side_reset. Same as VLV X0. |
| 1391 | * a. GUnit 0x2110 bit[0] set to 1 (def 0) |
| 1392 | * b. The other bits such as sfr settings / modesel may all be set |
| 1393 | * to 0. |
| 1394 | * |
| 1395 | * This should only be done on init and resume from S3 with both |
| 1396 | * PLLs disabled, or we risk losing DPIO and PLL synchronization. |
| 1397 | */ |
| 1398 | I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) | DPIO_CMNRST); |
| 1399 | } |
| 1400 | |
| 1401 | static void vlv_enable_pll(struct intel_crtc *crtc) |
| 1402 | { |
| 1403 | struct drm_device *dev = crtc->base.dev; |
| 1404 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 1405 | int reg = DPLL(crtc->pipe); |
| 1406 | u32 dpll = crtc->config.dpll_hw_state.dpll; |
| 1407 | |
| 1408 | assert_pipe_disabled(dev_priv, crtc->pipe); |
| 1409 | |
| 1410 | /* No really, not for ILK+ */ |
| 1411 | BUG_ON(!IS_VALLEYVIEW(dev_priv->dev)); |
| 1412 | |
| 1413 | /* PLL is protected by panel, make sure we can write it */ |
| 1414 | if (IS_MOBILE(dev_priv->dev) && !IS_I830(dev_priv->dev)) |
| 1415 | assert_panel_unlocked(dev_priv, crtc->pipe); |
| 1416 | |
| 1417 | I915_WRITE(reg, dpll); |
| 1418 | POSTING_READ(reg); |
| 1419 | udelay(150); |
| 1420 | |
| 1421 | if (wait_for(((I915_READ(reg) & DPLL_LOCK_VLV) == DPLL_LOCK_VLV), 1)) |
| 1422 | DRM_ERROR("DPLL %d failed to lock\n", crtc->pipe); |
| 1423 | |
| 1424 | I915_WRITE(DPLL_MD(crtc->pipe), crtc->config.dpll_hw_state.dpll_md); |
| 1425 | POSTING_READ(DPLL_MD(crtc->pipe)); |
| 1426 | |
| 1427 | /* We do this three times for luck */ |
| 1428 | I915_WRITE(reg, dpll); |
| 1429 | POSTING_READ(reg); |
| 1430 | udelay(150); /* wait for warmup */ |
| 1431 | I915_WRITE(reg, dpll); |
| 1432 | POSTING_READ(reg); |
| 1433 | udelay(150); /* wait for warmup */ |
| 1434 | I915_WRITE(reg, dpll); |
| 1435 | POSTING_READ(reg); |
| 1436 | udelay(150); /* wait for warmup */ |
| 1437 | } |
| 1438 | |
| 1439 | static void i9xx_enable_pll(struct intel_crtc *crtc) |
| 1440 | { |
| 1441 | struct drm_device *dev = crtc->base.dev; |
| 1442 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 1443 | int reg = DPLL(crtc->pipe); |
| 1444 | u32 dpll = crtc->config.dpll_hw_state.dpll; |
| 1445 | |
| 1446 | assert_pipe_disabled(dev_priv, crtc->pipe); |
| 1447 | |
| 1448 | /* No really, not for ILK+ */ |
| 1449 | BUG_ON(INTEL_INFO(dev)->gen >= 5); |
| 1450 | |
| 1451 | /* PLL is protected by panel, make sure we can write it */ |
| 1452 | if (IS_MOBILE(dev) && !IS_I830(dev)) |
| 1453 | assert_panel_unlocked(dev_priv, crtc->pipe); |
| 1454 | |
| 1455 | I915_WRITE(reg, dpll); |
| 1456 | |
| 1457 | /* Wait for the clocks to stabilize. */ |
| 1458 | POSTING_READ(reg); |
| 1459 | udelay(150); |
| 1460 | |
| 1461 | if (INTEL_INFO(dev)->gen >= 4) { |
| 1462 | I915_WRITE(DPLL_MD(crtc->pipe), |
| 1463 | crtc->config.dpll_hw_state.dpll_md); |
| 1464 | } else { |
| 1465 | /* The pixel multiplier can only be updated once the |
| 1466 | * DPLL is enabled and the clocks are stable. |
| 1467 | * |
| 1468 | * So write it again. |
| 1469 | */ |
| 1470 | I915_WRITE(reg, dpll); |
| 1471 | } |
| 1472 | |
| 1473 | /* We do this three times for luck */ |
| 1474 | I915_WRITE(reg, dpll); |
| 1475 | POSTING_READ(reg); |
| 1476 | udelay(150); /* wait for warmup */ |
| 1477 | I915_WRITE(reg, dpll); |
| 1478 | POSTING_READ(reg); |
| 1479 | udelay(150); /* wait for warmup */ |
| 1480 | I915_WRITE(reg, dpll); |
| 1481 | POSTING_READ(reg); |
| 1482 | udelay(150); /* wait for warmup */ |
| 1483 | } |
| 1484 | |
| 1485 | /** |
| 1486 | * i9xx_disable_pll - disable a PLL |
| 1487 | * @dev_priv: i915 private structure |
| 1488 | * @pipe: pipe PLL to disable |
| 1489 | * |
| 1490 | * Disable the PLL for @pipe, making sure the pipe is off first. |
| 1491 | * |
| 1492 | * Note! This is for pre-ILK only. |
| 1493 | */ |
| 1494 | static void i9xx_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe) |
| 1495 | { |
| 1496 | /* Don't disable pipe A or pipe A PLLs if needed */ |
| 1497 | if (pipe == PIPE_A && (dev_priv->quirks & QUIRK_PIPEA_FORCE)) |
| 1498 | return; |
| 1499 | |
| 1500 | /* Make sure the pipe isn't still relying on us */ |
| 1501 | assert_pipe_disabled(dev_priv, pipe); |
| 1502 | |
| 1503 | I915_WRITE(DPLL(pipe), 0); |
| 1504 | POSTING_READ(DPLL(pipe)); |
| 1505 | } |
| 1506 | |
| 1507 | static void vlv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe) |
| 1508 | { |
| 1509 | u32 val = 0; |
| 1510 | |
| 1511 | /* Make sure the pipe isn't still relying on us */ |
| 1512 | assert_pipe_disabled(dev_priv, pipe); |
| 1513 | |
| 1514 | /* |
| 1515 | * Leave integrated clock source and reference clock enabled for pipe B. |
| 1516 | * The latter is needed for VGA hotplug / manual detection. |
| 1517 | */ |
| 1518 | if (pipe == PIPE_B) |
| 1519 | val = DPLL_INTEGRATED_CRI_CLK_VLV | DPLL_REFA_CLK_ENABLE_VLV; |
| 1520 | I915_WRITE(DPLL(pipe), val); |
| 1521 | POSTING_READ(DPLL(pipe)); |
| 1522 | } |
| 1523 | |
| 1524 | void vlv_wait_port_ready(struct drm_i915_private *dev_priv, |
| 1525 | struct intel_digital_port *dport) |
| 1526 | { |
| 1527 | u32 port_mask; |
| 1528 | |
| 1529 | switch (dport->port) { |
| 1530 | case PORT_B: |
| 1531 | port_mask = DPLL_PORTB_READY_MASK; |
| 1532 | break; |
| 1533 | case PORT_C: |
| 1534 | port_mask = DPLL_PORTC_READY_MASK; |
| 1535 | break; |
| 1536 | default: |
| 1537 | BUG(); |
| 1538 | } |
| 1539 | |
| 1540 | if (wait_for((I915_READ(DPLL(0)) & port_mask) == 0, 1000)) |
| 1541 | WARN(1, "timed out waiting for port %c ready: 0x%08x\n", |
| 1542 | port_name(dport->port), I915_READ(DPLL(0))); |
| 1543 | } |
| 1544 | |
| 1545 | /** |
| 1546 | * ironlake_enable_shared_dpll - enable PCH PLL |
| 1547 | * @dev_priv: i915 private structure |
| 1548 | * @pipe: pipe PLL to enable |
| 1549 | * |
| 1550 | * The PCH PLL needs to be enabled before the PCH transcoder, since it |
| 1551 | * drives the transcoder clock. |
| 1552 | */ |
| 1553 | static void ironlake_enable_shared_dpll(struct intel_crtc *crtc) |
| 1554 | { |
| 1555 | struct drm_device *dev = crtc->base.dev; |
| 1556 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 1557 | struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc); |
| 1558 | |
| 1559 | /* PCH PLLs only available on ILK, SNB and IVB */ |
| 1560 | BUG_ON(INTEL_INFO(dev)->gen < 5); |
| 1561 | if (WARN_ON(pll == NULL)) |
| 1562 | return; |
| 1563 | |
| 1564 | if (WARN_ON(pll->refcount == 0)) |
| 1565 | return; |
| 1566 | |
| 1567 | DRM_DEBUG_KMS("enable %s (active %d, on? %d)for crtc %d\n", |
| 1568 | pll->name, pll->active, pll->on, |
| 1569 | crtc->base.base.id); |
| 1570 | |
| 1571 | if (pll->active++) { |
| 1572 | WARN_ON(!pll->on); |
| 1573 | assert_shared_dpll_enabled(dev_priv, pll); |
| 1574 | return; |
| 1575 | } |
| 1576 | WARN_ON(pll->on); |
| 1577 | |
| 1578 | DRM_DEBUG_KMS("enabling %s\n", pll->name); |
| 1579 | pll->enable(dev_priv, pll); |
| 1580 | pll->on = true; |
| 1581 | } |
| 1582 | |
| 1583 | static void intel_disable_shared_dpll(struct intel_crtc *crtc) |
| 1584 | { |
| 1585 | struct drm_device *dev = crtc->base.dev; |
| 1586 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 1587 | struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc); |
| 1588 | |
| 1589 | /* PCH only available on ILK+ */ |
| 1590 | BUG_ON(INTEL_INFO(dev)->gen < 5); |
| 1591 | if (WARN_ON(pll == NULL)) |
| 1592 | return; |
| 1593 | |
| 1594 | if (WARN_ON(pll->refcount == 0)) |
| 1595 | return; |
| 1596 | |
| 1597 | DRM_DEBUG_KMS("disable %s (active %d, on? %d) for crtc %d\n", |
| 1598 | pll->name, pll->active, pll->on, |
| 1599 | crtc->base.base.id); |
| 1600 | |
| 1601 | if (WARN_ON(pll->active == 0)) { |
| 1602 | assert_shared_dpll_disabled(dev_priv, pll); |
| 1603 | return; |
| 1604 | } |
| 1605 | |
| 1606 | assert_shared_dpll_enabled(dev_priv, pll); |
| 1607 | WARN_ON(!pll->on); |
| 1608 | if (--pll->active) |
| 1609 | return; |
| 1610 | |
| 1611 | DRM_DEBUG_KMS("disabling %s\n", pll->name); |
| 1612 | pll->disable(dev_priv, pll); |
| 1613 | pll->on = false; |
| 1614 | } |
| 1615 | |
| 1616 | static void ironlake_enable_pch_transcoder(struct drm_i915_private *dev_priv, |
| 1617 | enum pipe pipe) |
| 1618 | { |
| 1619 | struct drm_device *dev = dev_priv->dev; |
| 1620 | struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe]; |
| 1621 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 1622 | uint32_t reg, val, pipeconf_val; |
| 1623 | |
| 1624 | /* PCH only available on ILK+ */ |
| 1625 | BUG_ON(INTEL_INFO(dev)->gen < 5); |
| 1626 | |
| 1627 | /* Make sure PCH DPLL is enabled */ |
| 1628 | assert_shared_dpll_enabled(dev_priv, |
| 1629 | intel_crtc_to_shared_dpll(intel_crtc)); |
| 1630 | |
| 1631 | /* FDI must be feeding us bits for PCH ports */ |
| 1632 | assert_fdi_tx_enabled(dev_priv, pipe); |
| 1633 | assert_fdi_rx_enabled(dev_priv, pipe); |
| 1634 | |
| 1635 | if (HAS_PCH_CPT(dev)) { |
| 1636 | /* Workaround: Set the timing override bit before enabling the |
| 1637 | * pch transcoder. */ |
| 1638 | reg = TRANS_CHICKEN2(pipe); |
| 1639 | val = I915_READ(reg); |
| 1640 | val |= TRANS_CHICKEN2_TIMING_OVERRIDE; |
| 1641 | I915_WRITE(reg, val); |
| 1642 | } |
| 1643 | |
| 1644 | reg = PCH_TRANSCONF(pipe); |
| 1645 | val = I915_READ(reg); |
| 1646 | pipeconf_val = I915_READ(PIPECONF(pipe)); |
| 1647 | |
| 1648 | if (HAS_PCH_IBX(dev_priv->dev)) { |
| 1649 | /* |
| 1650 | * make the BPC in transcoder be consistent with |
| 1651 | * that in pipeconf reg. |
| 1652 | */ |
| 1653 | val &= ~PIPECONF_BPC_MASK; |
| 1654 | val |= pipeconf_val & PIPECONF_BPC_MASK; |
| 1655 | } |
| 1656 | |
| 1657 | val &= ~TRANS_INTERLACE_MASK; |
| 1658 | if ((pipeconf_val & PIPECONF_INTERLACE_MASK) == PIPECONF_INTERLACED_ILK) |
| 1659 | if (HAS_PCH_IBX(dev_priv->dev) && |
| 1660 | intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) |
| 1661 | val |= TRANS_LEGACY_INTERLACED_ILK; |
| 1662 | else |
| 1663 | val |= TRANS_INTERLACED; |
| 1664 | else |
| 1665 | val |= TRANS_PROGRESSIVE; |
| 1666 | |
| 1667 | I915_WRITE(reg, val | TRANS_ENABLE); |
| 1668 | if (wait_for(I915_READ(reg) & TRANS_STATE_ENABLE, 100)) |
| 1669 | DRM_ERROR("failed to enable transcoder %c\n", pipe_name(pipe)); |
| 1670 | } |
| 1671 | |
| 1672 | static void lpt_enable_pch_transcoder(struct drm_i915_private *dev_priv, |
| 1673 | enum transcoder cpu_transcoder) |
| 1674 | { |
| 1675 | u32 val, pipeconf_val; |
| 1676 | |
| 1677 | /* PCH only available on ILK+ */ |
| 1678 | BUG_ON(INTEL_INFO(dev_priv->dev)->gen < 5); |
| 1679 | |
| 1680 | /* FDI must be feeding us bits for PCH ports */ |
| 1681 | assert_fdi_tx_enabled(dev_priv, (enum pipe) cpu_transcoder); |
| 1682 | assert_fdi_rx_enabled(dev_priv, TRANSCODER_A); |
| 1683 | |
| 1684 | /* Workaround: set timing override bit. */ |
| 1685 | val = I915_READ(_TRANSA_CHICKEN2); |
| 1686 | val |= TRANS_CHICKEN2_TIMING_OVERRIDE; |
| 1687 | I915_WRITE(_TRANSA_CHICKEN2, val); |
| 1688 | |
| 1689 | val = TRANS_ENABLE; |
| 1690 | pipeconf_val = I915_READ(PIPECONF(cpu_transcoder)); |
| 1691 | |
| 1692 | if ((pipeconf_val & PIPECONF_INTERLACE_MASK_HSW) == |
| 1693 | PIPECONF_INTERLACED_ILK) |
| 1694 | val |= TRANS_INTERLACED; |
| 1695 | else |
| 1696 | val |= TRANS_PROGRESSIVE; |
| 1697 | |
| 1698 | I915_WRITE(LPT_TRANSCONF, val); |
| 1699 | if (wait_for(I915_READ(LPT_TRANSCONF) & TRANS_STATE_ENABLE, 100)) |
| 1700 | DRM_ERROR("Failed to enable PCH transcoder\n"); |
| 1701 | } |
| 1702 | |
| 1703 | static void ironlake_disable_pch_transcoder(struct drm_i915_private *dev_priv, |
| 1704 | enum pipe pipe) |
| 1705 | { |
| 1706 | struct drm_device *dev = dev_priv->dev; |
| 1707 | uint32_t reg, val; |
| 1708 | |
| 1709 | /* FDI relies on the transcoder */ |
| 1710 | assert_fdi_tx_disabled(dev_priv, pipe); |
| 1711 | assert_fdi_rx_disabled(dev_priv, pipe); |
| 1712 | |
| 1713 | /* Ports must be off as well */ |
| 1714 | assert_pch_ports_disabled(dev_priv, pipe); |
| 1715 | |
| 1716 | reg = PCH_TRANSCONF(pipe); |
| 1717 | val = I915_READ(reg); |
| 1718 | val &= ~TRANS_ENABLE; |
| 1719 | I915_WRITE(reg, val); |
| 1720 | /* wait for PCH transcoder off, transcoder state */ |
| 1721 | if (wait_for((I915_READ(reg) & TRANS_STATE_ENABLE) == 0, 50)) |
| 1722 | DRM_ERROR("failed to disable transcoder %c\n", pipe_name(pipe)); |
| 1723 | |
| 1724 | if (!HAS_PCH_IBX(dev)) { |
| 1725 | /* Workaround: Clear the timing override chicken bit again. */ |
| 1726 | reg = TRANS_CHICKEN2(pipe); |
| 1727 | val = I915_READ(reg); |
| 1728 | val &= ~TRANS_CHICKEN2_TIMING_OVERRIDE; |
| 1729 | I915_WRITE(reg, val); |
| 1730 | } |
| 1731 | } |
| 1732 | |
| 1733 | static void lpt_disable_pch_transcoder(struct drm_i915_private *dev_priv) |
| 1734 | { |
| 1735 | u32 val; |
| 1736 | |
| 1737 | val = I915_READ(LPT_TRANSCONF); |
| 1738 | val &= ~TRANS_ENABLE; |
| 1739 | I915_WRITE(LPT_TRANSCONF, val); |
| 1740 | /* wait for PCH transcoder off, transcoder state */ |
| 1741 | if (wait_for((I915_READ(LPT_TRANSCONF) & TRANS_STATE_ENABLE) == 0, 50)) |
| 1742 | DRM_ERROR("Failed to disable PCH transcoder\n"); |
| 1743 | |
| 1744 | /* Workaround: clear timing override bit. */ |
| 1745 | val = I915_READ(_TRANSA_CHICKEN2); |
| 1746 | val &= ~TRANS_CHICKEN2_TIMING_OVERRIDE; |
| 1747 | I915_WRITE(_TRANSA_CHICKEN2, val); |
| 1748 | } |
| 1749 | |
| 1750 | /** |
| 1751 | * intel_enable_pipe - enable a pipe, asserting requirements |
| 1752 | * @crtc: crtc responsible for the pipe |
| 1753 | * |
| 1754 | * Enable @crtc's pipe, making sure that various hardware specific requirements |
| 1755 | * are met, if applicable, e.g. PLL enabled, LVDS pairs enabled, etc. |
| 1756 | */ |
| 1757 | static void intel_enable_pipe(struct intel_crtc *crtc) |
| 1758 | { |
| 1759 | struct drm_device *dev = crtc->base.dev; |
| 1760 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 1761 | enum pipe pipe = crtc->pipe; |
| 1762 | enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv, |
| 1763 | pipe); |
| 1764 | enum pipe pch_transcoder; |
| 1765 | int reg; |
| 1766 | u32 val; |
| 1767 | |
| 1768 | assert_planes_disabled(dev_priv, pipe); |
| 1769 | assert_cursor_disabled(dev_priv, pipe); |
| 1770 | assert_sprites_disabled(dev_priv, pipe); |
| 1771 | |
| 1772 | if (HAS_PCH_LPT(dev_priv->dev)) |
| 1773 | pch_transcoder = TRANSCODER_A; |
| 1774 | else |
| 1775 | pch_transcoder = pipe; |
| 1776 | |
| 1777 | /* |
| 1778 | * A pipe without a PLL won't actually be able to drive bits from |
| 1779 | * a plane. On ILK+ the pipe PLLs are integrated, so we don't |
| 1780 | * need the check. |
| 1781 | */ |
| 1782 | if (!HAS_PCH_SPLIT(dev_priv->dev)) |
| 1783 | if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DSI)) |
| 1784 | assert_dsi_pll_enabled(dev_priv); |
| 1785 | else |
| 1786 | assert_pll_enabled(dev_priv, pipe); |
| 1787 | else { |
| 1788 | if (crtc->config.has_pch_encoder) { |
| 1789 | /* if driving the PCH, we need FDI enabled */ |
| 1790 | assert_fdi_rx_pll_enabled(dev_priv, pch_transcoder); |
| 1791 | assert_fdi_tx_pll_enabled(dev_priv, |
| 1792 | (enum pipe) cpu_transcoder); |
| 1793 | } |
| 1794 | /* FIXME: assert CPU port conditions for SNB+ */ |
| 1795 | } |
| 1796 | |
| 1797 | reg = PIPECONF(cpu_transcoder); |
| 1798 | val = I915_READ(reg); |
| 1799 | if (val & PIPECONF_ENABLE) { |
| 1800 | WARN_ON(!(pipe == PIPE_A && |
| 1801 | dev_priv->quirks & QUIRK_PIPEA_FORCE)); |
| 1802 | return; |
| 1803 | } |
| 1804 | |
| 1805 | I915_WRITE(reg, val | PIPECONF_ENABLE); |
| 1806 | POSTING_READ(reg); |
| 1807 | |
| 1808 | /* |
| 1809 | * There's no guarantee the pipe will really start running now. It |
| 1810 | * depends on the Gen, the output type and the relative order between |
| 1811 | * pipe and plane enabling. Avoid waiting on HSW+ since it's not |
| 1812 | * necessary. |
| 1813 | * TODO: audit the previous gens. |
| 1814 | */ |
| 1815 | if (INTEL_INFO(dev)->gen <= 7 && !IS_HASWELL(dev)) |
| 1816 | intel_wait_for_vblank(dev_priv->dev, pipe); |
| 1817 | } |
| 1818 | |
| 1819 | /** |
| 1820 | * intel_disable_pipe - disable a pipe, asserting requirements |
| 1821 | * @dev_priv: i915 private structure |
| 1822 | * @pipe: pipe to disable |
| 1823 | * |
| 1824 | * Disable @pipe, making sure that various hardware specific requirements |
| 1825 | * are met, if applicable, e.g. plane disabled, panel fitter off, etc. |
| 1826 | * |
| 1827 | * @pipe should be %PIPE_A or %PIPE_B. |
| 1828 | * |
| 1829 | * Will wait until the pipe has shut down before returning. |
| 1830 | */ |
| 1831 | static void intel_disable_pipe(struct drm_i915_private *dev_priv, |
| 1832 | enum pipe pipe) |
| 1833 | { |
| 1834 | enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv, |
| 1835 | pipe); |
| 1836 | int reg; |
| 1837 | u32 val; |
| 1838 | |
| 1839 | /* |
| 1840 | * Make sure planes won't keep trying to pump pixels to us, |
| 1841 | * or we might hang the display. |
| 1842 | */ |
| 1843 | assert_planes_disabled(dev_priv, pipe); |
| 1844 | assert_cursor_disabled(dev_priv, pipe); |
| 1845 | assert_sprites_disabled(dev_priv, pipe); |
| 1846 | |
| 1847 | /* Don't disable pipe A or pipe A PLLs if needed */ |
| 1848 | if (pipe == PIPE_A && (dev_priv->quirks & QUIRK_PIPEA_FORCE)) |
| 1849 | return; |
| 1850 | |
| 1851 | reg = PIPECONF(cpu_transcoder); |
| 1852 | val = I915_READ(reg); |
| 1853 | if ((val & PIPECONF_ENABLE) == 0) |
| 1854 | return; |
| 1855 | |
| 1856 | I915_WRITE(reg, val & ~PIPECONF_ENABLE); |
| 1857 | intel_wait_for_pipe_off(dev_priv->dev, pipe); |
| 1858 | } |
| 1859 | |
| 1860 | /* |
| 1861 | * Plane regs are double buffered, going from enabled->disabled needs a |
| 1862 | * trigger in order to latch. The display address reg provides this. |
| 1863 | */ |
| 1864 | void intel_flush_primary_plane(struct drm_i915_private *dev_priv, |
| 1865 | enum plane plane) |
| 1866 | { |
| 1867 | struct drm_device *dev = dev_priv->dev; |
| 1868 | u32 reg = INTEL_INFO(dev)->gen >= 4 ? DSPSURF(plane) : DSPADDR(plane); |
| 1869 | |
| 1870 | I915_WRITE(reg, I915_READ(reg)); |
| 1871 | POSTING_READ(reg); |
| 1872 | } |
| 1873 | |
| 1874 | /** |
| 1875 | * intel_enable_primary_plane - enable the primary plane on a given pipe |
| 1876 | * @dev_priv: i915 private structure |
| 1877 | * @plane: plane to enable |
| 1878 | * @pipe: pipe being fed |
| 1879 | * |
| 1880 | * Enable @plane on @pipe, making sure that @pipe is running first. |
| 1881 | */ |
| 1882 | static void intel_enable_primary_plane(struct drm_i915_private *dev_priv, |
| 1883 | enum plane plane, enum pipe pipe) |
| 1884 | { |
| 1885 | struct intel_crtc *intel_crtc = |
| 1886 | to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]); |
| 1887 | int reg; |
| 1888 | u32 val; |
| 1889 | |
| 1890 | /* If the pipe isn't enabled, we can't pump pixels and may hang */ |
| 1891 | assert_pipe_enabled(dev_priv, pipe); |
| 1892 | |
| 1893 | WARN(intel_crtc->primary_enabled, "Primary plane already enabled\n"); |
| 1894 | |
| 1895 | intel_crtc->primary_enabled = true; |
| 1896 | |
| 1897 | reg = DSPCNTR(plane); |
| 1898 | val = I915_READ(reg); |
| 1899 | if (val & DISPLAY_PLANE_ENABLE) |
| 1900 | return; |
| 1901 | |
| 1902 | I915_WRITE(reg, val | DISPLAY_PLANE_ENABLE); |
| 1903 | intel_flush_primary_plane(dev_priv, plane); |
| 1904 | intel_wait_for_vblank(dev_priv->dev, pipe); |
| 1905 | } |
| 1906 | |
| 1907 | /** |
| 1908 | * intel_disable_primary_plane - disable the primary plane |
| 1909 | * @dev_priv: i915 private structure |
| 1910 | * @plane: plane to disable |
| 1911 | * @pipe: pipe consuming the data |
| 1912 | * |
| 1913 | * Disable @plane; should be an independent operation. |
| 1914 | */ |
| 1915 | static void intel_disable_primary_plane(struct drm_i915_private *dev_priv, |
| 1916 | enum plane plane, enum pipe pipe) |
| 1917 | { |
| 1918 | struct intel_crtc *intel_crtc = |
| 1919 | to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]); |
| 1920 | int reg; |
| 1921 | u32 val; |
| 1922 | |
| 1923 | WARN(!intel_crtc->primary_enabled, "Primary plane already disabled\n"); |
| 1924 | |
| 1925 | intel_crtc->primary_enabled = false; |
| 1926 | |
| 1927 | reg = DSPCNTR(plane); |
| 1928 | val = I915_READ(reg); |
| 1929 | if ((val & DISPLAY_PLANE_ENABLE) == 0) |
| 1930 | return; |
| 1931 | |
| 1932 | I915_WRITE(reg, val & ~DISPLAY_PLANE_ENABLE); |
| 1933 | intel_flush_primary_plane(dev_priv, plane); |
| 1934 | intel_wait_for_vblank(dev_priv->dev, pipe); |
| 1935 | } |
| 1936 | |
| 1937 | static bool need_vtd_wa(struct drm_device *dev) |
| 1938 | { |
| 1939 | #ifdef CONFIG_INTEL_IOMMU |
| 1940 | if (INTEL_INFO(dev)->gen >= 6 && intel_iommu_gfx_mapped) |
| 1941 | return true; |
| 1942 | #endif |
| 1943 | return false; |
| 1944 | } |
| 1945 | |
| 1946 | static int intel_align_height(struct drm_device *dev, int height, bool tiled) |
| 1947 | { |
| 1948 | int tile_height; |
| 1949 | |
| 1950 | tile_height = tiled ? (IS_GEN2(dev) ? 16 : 8) : 1; |
| 1951 | return ALIGN(height, tile_height); |
| 1952 | } |
| 1953 | |
| 1954 | int |
| 1955 | intel_pin_and_fence_fb_obj(struct drm_device *dev, |
| 1956 | struct drm_i915_gem_object *obj, |
| 1957 | struct intel_ring_buffer *pipelined) |
| 1958 | { |
| 1959 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 1960 | u32 alignment; |
| 1961 | int ret; |
| 1962 | |
| 1963 | switch (obj->tiling_mode) { |
| 1964 | case I915_TILING_NONE: |
| 1965 | if (IS_BROADWATER(dev) || IS_CRESTLINE(dev)) |
| 1966 | alignment = 128 * 1024; |
| 1967 | else if (INTEL_INFO(dev)->gen >= 4) |
| 1968 | alignment = 4 * 1024; |
| 1969 | else |
| 1970 | alignment = 64 * 1024; |
| 1971 | break; |
| 1972 | case I915_TILING_X: |
| 1973 | /* pin() will align the object as required by fence */ |
| 1974 | alignment = 0; |
| 1975 | break; |
| 1976 | case I915_TILING_Y: |
| 1977 | WARN(1, "Y tiled bo slipped through, driver bug!\n"); |
| 1978 | return -EINVAL; |
| 1979 | default: |
| 1980 | BUG(); |
| 1981 | } |
| 1982 | |
| 1983 | /* Note that the w/a also requires 64 PTE of padding following the |
| 1984 | * bo. We currently fill all unused PTE with the shadow page and so |
| 1985 | * we should always have valid PTE following the scanout preventing |
| 1986 | * the VT-d warning. |
| 1987 | */ |
| 1988 | if (need_vtd_wa(dev) && alignment < 256 * 1024) |
| 1989 | alignment = 256 * 1024; |
| 1990 | |
| 1991 | dev_priv->mm.interruptible = false; |
| 1992 | ret = i915_gem_object_pin_to_display_plane(obj, alignment, pipelined); |
| 1993 | if (ret) |
| 1994 | goto err_interruptible; |
| 1995 | |
| 1996 | /* Install a fence for tiled scan-out. Pre-i965 always needs a |
| 1997 | * fence, whereas 965+ only requires a fence if using |
| 1998 | * framebuffer compression. For simplicity, we always install |
| 1999 | * a fence as the cost is not that onerous. |
| 2000 | */ |
| 2001 | ret = i915_gem_object_get_fence(obj); |
| 2002 | if (ret) |
| 2003 | goto err_unpin; |
| 2004 | |
| 2005 | i915_gem_object_pin_fence(obj); |
| 2006 | |
| 2007 | dev_priv->mm.interruptible = true; |
| 2008 | return 0; |
| 2009 | |
| 2010 | err_unpin: |
| 2011 | i915_gem_object_unpin_from_display_plane(obj); |
| 2012 | err_interruptible: |
| 2013 | dev_priv->mm.interruptible = true; |
| 2014 | return ret; |
| 2015 | } |
| 2016 | |
| 2017 | void intel_unpin_fb_obj(struct drm_i915_gem_object *obj) |
| 2018 | { |
| 2019 | i915_gem_object_unpin_fence(obj); |
| 2020 | i915_gem_object_unpin_from_display_plane(obj); |
| 2021 | } |
| 2022 | |
| 2023 | /* Computes the linear offset to the base tile and adjusts x, y. bytes per pixel |
| 2024 | * is assumed to be a power-of-two. */ |
| 2025 | unsigned long intel_gen4_compute_page_offset(int *x, int *y, |
| 2026 | unsigned int tiling_mode, |
| 2027 | unsigned int cpp, |
| 2028 | unsigned int pitch) |
| 2029 | { |
| 2030 | if (tiling_mode != I915_TILING_NONE) { |
| 2031 | unsigned int tile_rows, tiles; |
| 2032 | |
| 2033 | tile_rows = *y / 8; |
| 2034 | *y %= 8; |
| 2035 | |
| 2036 | tiles = *x / (512/cpp); |
| 2037 | *x %= 512/cpp; |
| 2038 | |
| 2039 | return tile_rows * pitch * 8 + tiles * 4096; |
| 2040 | } else { |
| 2041 | unsigned int offset; |
| 2042 | |
| 2043 | offset = *y * pitch + *x * cpp; |
| 2044 | *y = 0; |
| 2045 | *x = (offset & 4095) / cpp; |
| 2046 | return offset & -4096; |
| 2047 | } |
| 2048 | } |
| 2049 | |
| 2050 | int intel_format_to_fourcc(int format) |
| 2051 | { |
| 2052 | switch (format) { |
| 2053 | case DISPPLANE_8BPP: |
| 2054 | return DRM_FORMAT_C8; |
| 2055 | case DISPPLANE_BGRX555: |
| 2056 | return DRM_FORMAT_XRGB1555; |
| 2057 | case DISPPLANE_BGRX565: |
| 2058 | return DRM_FORMAT_RGB565; |
| 2059 | default: |
| 2060 | case DISPPLANE_BGRX888: |
| 2061 | return DRM_FORMAT_XRGB8888; |
| 2062 | case DISPPLANE_RGBX888: |
| 2063 | return DRM_FORMAT_XBGR8888; |
| 2064 | case DISPPLANE_BGRX101010: |
| 2065 | return DRM_FORMAT_XRGB2101010; |
| 2066 | case DISPPLANE_RGBX101010: |
| 2067 | return DRM_FORMAT_XBGR2101010; |
| 2068 | } |
| 2069 | } |
| 2070 | |
| 2071 | static bool intel_alloc_plane_obj(struct intel_crtc *crtc, |
| 2072 | struct intel_plane_config *plane_config) |
| 2073 | { |
| 2074 | struct drm_device *dev = crtc->base.dev; |
| 2075 | struct drm_i915_gem_object *obj = NULL; |
| 2076 | struct drm_mode_fb_cmd2 mode_cmd = { 0 }; |
| 2077 | u32 base = plane_config->base; |
| 2078 | |
| 2079 | if (plane_config->size == 0) |
| 2080 | return false; |
| 2081 | |
| 2082 | obj = i915_gem_object_create_stolen_for_preallocated(dev, base, base, |
| 2083 | plane_config->size); |
| 2084 | if (!obj) |
| 2085 | return false; |
| 2086 | |
| 2087 | if (plane_config->tiled) { |
| 2088 | obj->tiling_mode = I915_TILING_X; |
| 2089 | obj->stride = crtc->base.fb->pitches[0]; |
| 2090 | } |
| 2091 | |
| 2092 | mode_cmd.pixel_format = crtc->base.fb->pixel_format; |
| 2093 | mode_cmd.width = crtc->base.fb->width; |
| 2094 | mode_cmd.height = crtc->base.fb->height; |
| 2095 | mode_cmd.pitches[0] = crtc->base.fb->pitches[0]; |
| 2096 | |
| 2097 | mutex_lock(&dev->struct_mutex); |
| 2098 | |
| 2099 | if (intel_framebuffer_init(dev, to_intel_framebuffer(crtc->base.fb), |
| 2100 | &mode_cmd, obj)) { |
| 2101 | DRM_DEBUG_KMS("intel fb init failed\n"); |
| 2102 | goto out_unref_obj; |
| 2103 | } |
| 2104 | |
| 2105 | mutex_unlock(&dev->struct_mutex); |
| 2106 | |
| 2107 | DRM_DEBUG_KMS("plane fb obj %p\n", obj); |
| 2108 | return true; |
| 2109 | |
| 2110 | out_unref_obj: |
| 2111 | drm_gem_object_unreference(&obj->base); |
| 2112 | mutex_unlock(&dev->struct_mutex); |
| 2113 | return false; |
| 2114 | } |
| 2115 | |
| 2116 | static void intel_find_plane_obj(struct intel_crtc *intel_crtc, |
| 2117 | struct intel_plane_config *plane_config) |
| 2118 | { |
| 2119 | struct drm_device *dev = intel_crtc->base.dev; |
| 2120 | struct drm_crtc *c; |
| 2121 | struct intel_crtc *i; |
| 2122 | struct intel_framebuffer *fb; |
| 2123 | |
| 2124 | if (!intel_crtc->base.fb) |
| 2125 | return; |
| 2126 | |
| 2127 | if (intel_alloc_plane_obj(intel_crtc, plane_config)) |
| 2128 | return; |
| 2129 | |
| 2130 | kfree(intel_crtc->base.fb); |
| 2131 | intel_crtc->base.fb = NULL; |
| 2132 | |
| 2133 | /* |
| 2134 | * Failed to alloc the obj, check to see if we should share |
| 2135 | * an fb with another CRTC instead |
| 2136 | */ |
| 2137 | list_for_each_entry(c, &dev->mode_config.crtc_list, head) { |
| 2138 | i = to_intel_crtc(c); |
| 2139 | |
| 2140 | if (c == &intel_crtc->base) |
| 2141 | continue; |
| 2142 | |
| 2143 | if (!i->active || !c->fb) |
| 2144 | continue; |
| 2145 | |
| 2146 | fb = to_intel_framebuffer(c->fb); |
| 2147 | if (i915_gem_obj_ggtt_offset(fb->obj) == plane_config->base) { |
| 2148 | drm_framebuffer_reference(c->fb); |
| 2149 | intel_crtc->base.fb = c->fb; |
| 2150 | break; |
| 2151 | } |
| 2152 | } |
| 2153 | } |
| 2154 | |
| 2155 | static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb, |
| 2156 | int x, int y) |
| 2157 | { |
| 2158 | struct drm_device *dev = crtc->dev; |
| 2159 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 2160 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 2161 | struct intel_framebuffer *intel_fb; |
| 2162 | struct drm_i915_gem_object *obj; |
| 2163 | int plane = intel_crtc->plane; |
| 2164 | unsigned long linear_offset; |
| 2165 | u32 dspcntr; |
| 2166 | u32 reg; |
| 2167 | |
| 2168 | switch (plane) { |
| 2169 | case 0: |
| 2170 | case 1: |
| 2171 | break; |
| 2172 | default: |
| 2173 | DRM_ERROR("Can't update plane %c in SAREA\n", plane_name(plane)); |
| 2174 | return -EINVAL; |
| 2175 | } |
| 2176 | |
| 2177 | intel_fb = to_intel_framebuffer(fb); |
| 2178 | obj = intel_fb->obj; |
| 2179 | |
| 2180 | reg = DSPCNTR(plane); |
| 2181 | dspcntr = I915_READ(reg); |
| 2182 | /* Mask out pixel format bits in case we change it */ |
| 2183 | dspcntr &= ~DISPPLANE_PIXFORMAT_MASK; |
| 2184 | switch (fb->pixel_format) { |
| 2185 | case DRM_FORMAT_C8: |
| 2186 | dspcntr |= DISPPLANE_8BPP; |
| 2187 | break; |
| 2188 | case DRM_FORMAT_XRGB1555: |
| 2189 | case DRM_FORMAT_ARGB1555: |
| 2190 | dspcntr |= DISPPLANE_BGRX555; |
| 2191 | break; |
| 2192 | case DRM_FORMAT_RGB565: |
| 2193 | dspcntr |= DISPPLANE_BGRX565; |
| 2194 | break; |
| 2195 | case DRM_FORMAT_XRGB8888: |
| 2196 | case DRM_FORMAT_ARGB8888: |
| 2197 | dspcntr |= DISPPLANE_BGRX888; |
| 2198 | break; |
| 2199 | case DRM_FORMAT_XBGR8888: |
| 2200 | case DRM_FORMAT_ABGR8888: |
| 2201 | dspcntr |= DISPPLANE_RGBX888; |
| 2202 | break; |
| 2203 | case DRM_FORMAT_XRGB2101010: |
| 2204 | case DRM_FORMAT_ARGB2101010: |
| 2205 | dspcntr |= DISPPLANE_BGRX101010; |
| 2206 | break; |
| 2207 | case DRM_FORMAT_XBGR2101010: |
| 2208 | case DRM_FORMAT_ABGR2101010: |
| 2209 | dspcntr |= DISPPLANE_RGBX101010; |
| 2210 | break; |
| 2211 | default: |
| 2212 | BUG(); |
| 2213 | } |
| 2214 | |
| 2215 | if (INTEL_INFO(dev)->gen >= 4) { |
| 2216 | if (obj->tiling_mode != I915_TILING_NONE) |
| 2217 | dspcntr |= DISPPLANE_TILED; |
| 2218 | else |
| 2219 | dspcntr &= ~DISPPLANE_TILED; |
| 2220 | } |
| 2221 | |
| 2222 | if (IS_G4X(dev)) |
| 2223 | dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE; |
| 2224 | |
| 2225 | I915_WRITE(reg, dspcntr); |
| 2226 | |
| 2227 | linear_offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8); |
| 2228 | |
| 2229 | if (INTEL_INFO(dev)->gen >= 4) { |
| 2230 | intel_crtc->dspaddr_offset = |
| 2231 | intel_gen4_compute_page_offset(&x, &y, obj->tiling_mode, |
| 2232 | fb->bits_per_pixel / 8, |
| 2233 | fb->pitches[0]); |
| 2234 | linear_offset -= intel_crtc->dspaddr_offset; |
| 2235 | } else { |
| 2236 | intel_crtc->dspaddr_offset = linear_offset; |
| 2237 | } |
| 2238 | |
| 2239 | DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n", |
| 2240 | i915_gem_obj_ggtt_offset(obj), linear_offset, x, y, |
| 2241 | fb->pitches[0]); |
| 2242 | I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]); |
| 2243 | if (INTEL_INFO(dev)->gen >= 4) { |
| 2244 | I915_WRITE(DSPSURF(plane), |
| 2245 | i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset); |
| 2246 | I915_WRITE(DSPTILEOFF(plane), (y << 16) | x); |
| 2247 | I915_WRITE(DSPLINOFF(plane), linear_offset); |
| 2248 | } else |
| 2249 | I915_WRITE(DSPADDR(plane), i915_gem_obj_ggtt_offset(obj) + linear_offset); |
| 2250 | POSTING_READ(reg); |
| 2251 | |
| 2252 | return 0; |
| 2253 | } |
| 2254 | |
| 2255 | static int ironlake_update_plane(struct drm_crtc *crtc, |
| 2256 | struct drm_framebuffer *fb, int x, int y) |
| 2257 | { |
| 2258 | struct drm_device *dev = crtc->dev; |
| 2259 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 2260 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 2261 | struct intel_framebuffer *intel_fb; |
| 2262 | struct drm_i915_gem_object *obj; |
| 2263 | int plane = intel_crtc->plane; |
| 2264 | unsigned long linear_offset; |
| 2265 | u32 dspcntr; |
| 2266 | u32 reg; |
| 2267 | |
| 2268 | switch (plane) { |
| 2269 | case 0: |
| 2270 | case 1: |
| 2271 | case 2: |
| 2272 | break; |
| 2273 | default: |
| 2274 | DRM_ERROR("Can't update plane %c in SAREA\n", plane_name(plane)); |
| 2275 | return -EINVAL; |
| 2276 | } |
| 2277 | |
| 2278 | intel_fb = to_intel_framebuffer(fb); |
| 2279 | obj = intel_fb->obj; |
| 2280 | |
| 2281 | reg = DSPCNTR(plane); |
| 2282 | dspcntr = I915_READ(reg); |
| 2283 | /* Mask out pixel format bits in case we change it */ |
| 2284 | dspcntr &= ~DISPPLANE_PIXFORMAT_MASK; |
| 2285 | switch (fb->pixel_format) { |
| 2286 | case DRM_FORMAT_C8: |
| 2287 | dspcntr |= DISPPLANE_8BPP; |
| 2288 | break; |
| 2289 | case DRM_FORMAT_RGB565: |
| 2290 | dspcntr |= DISPPLANE_BGRX565; |
| 2291 | break; |
| 2292 | case DRM_FORMAT_XRGB8888: |
| 2293 | case DRM_FORMAT_ARGB8888: |
| 2294 | dspcntr |= DISPPLANE_BGRX888; |
| 2295 | break; |
| 2296 | case DRM_FORMAT_XBGR8888: |
| 2297 | case DRM_FORMAT_ABGR8888: |
| 2298 | dspcntr |= DISPPLANE_RGBX888; |
| 2299 | break; |
| 2300 | case DRM_FORMAT_XRGB2101010: |
| 2301 | case DRM_FORMAT_ARGB2101010: |
| 2302 | dspcntr |= DISPPLANE_BGRX101010; |
| 2303 | break; |
| 2304 | case DRM_FORMAT_XBGR2101010: |
| 2305 | case DRM_FORMAT_ABGR2101010: |
| 2306 | dspcntr |= DISPPLANE_RGBX101010; |
| 2307 | break; |
| 2308 | default: |
| 2309 | BUG(); |
| 2310 | } |
| 2311 | |
| 2312 | if (obj->tiling_mode != I915_TILING_NONE) |
| 2313 | dspcntr |= DISPPLANE_TILED; |
| 2314 | else |
| 2315 | dspcntr &= ~DISPPLANE_TILED; |
| 2316 | |
| 2317 | if (IS_HASWELL(dev) || IS_BROADWELL(dev)) |
| 2318 | dspcntr &= ~DISPPLANE_TRICKLE_FEED_DISABLE; |
| 2319 | else |
| 2320 | dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE; |
| 2321 | |
| 2322 | I915_WRITE(reg, dspcntr); |
| 2323 | |
| 2324 | linear_offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8); |
| 2325 | intel_crtc->dspaddr_offset = |
| 2326 | intel_gen4_compute_page_offset(&x, &y, obj->tiling_mode, |
| 2327 | fb->bits_per_pixel / 8, |
| 2328 | fb->pitches[0]); |
| 2329 | linear_offset -= intel_crtc->dspaddr_offset; |
| 2330 | |
| 2331 | DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n", |
| 2332 | i915_gem_obj_ggtt_offset(obj), linear_offset, x, y, |
| 2333 | fb->pitches[0]); |
| 2334 | I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]); |
| 2335 | I915_WRITE(DSPSURF(plane), |
| 2336 | i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset); |
| 2337 | if (IS_HASWELL(dev) || IS_BROADWELL(dev)) { |
| 2338 | I915_WRITE(DSPOFFSET(plane), (y << 16) | x); |
| 2339 | } else { |
| 2340 | I915_WRITE(DSPTILEOFF(plane), (y << 16) | x); |
| 2341 | I915_WRITE(DSPLINOFF(plane), linear_offset); |
| 2342 | } |
| 2343 | POSTING_READ(reg); |
| 2344 | |
| 2345 | return 0; |
| 2346 | } |
| 2347 | |
| 2348 | /* Assume fb object is pinned & idle & fenced and just update base pointers */ |
| 2349 | static int |
| 2350 | intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb, |
| 2351 | int x, int y, enum mode_set_atomic state) |
| 2352 | { |
| 2353 | struct drm_device *dev = crtc->dev; |
| 2354 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 2355 | |
| 2356 | if (dev_priv->display.disable_fbc) |
| 2357 | dev_priv->display.disable_fbc(dev); |
| 2358 | intel_increase_pllclock(crtc); |
| 2359 | |
| 2360 | return dev_priv->display.update_plane(crtc, fb, x, y); |
| 2361 | } |
| 2362 | |
| 2363 | void intel_display_handle_reset(struct drm_device *dev) |
| 2364 | { |
| 2365 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 2366 | struct drm_crtc *crtc; |
| 2367 | |
| 2368 | /* |
| 2369 | * Flips in the rings have been nuked by the reset, |
| 2370 | * so complete all pending flips so that user space |
| 2371 | * will get its events and not get stuck. |
| 2372 | * |
| 2373 | * Also update the base address of all primary |
| 2374 | * planes to the the last fb to make sure we're |
| 2375 | * showing the correct fb after a reset. |
| 2376 | * |
| 2377 | * Need to make two loops over the crtcs so that we |
| 2378 | * don't try to grab a crtc mutex before the |
| 2379 | * pending_flip_queue really got woken up. |
| 2380 | */ |
| 2381 | |
| 2382 | list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { |
| 2383 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 2384 | enum plane plane = intel_crtc->plane; |
| 2385 | |
| 2386 | intel_prepare_page_flip(dev, plane); |
| 2387 | intel_finish_page_flip_plane(dev, plane); |
| 2388 | } |
| 2389 | |
| 2390 | list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { |
| 2391 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 2392 | |
| 2393 | mutex_lock(&crtc->mutex); |
| 2394 | /* |
| 2395 | * FIXME: Once we have proper support for primary planes (and |
| 2396 | * disabling them without disabling the entire crtc) allow again |
| 2397 | * a NULL crtc->fb. |
| 2398 | */ |
| 2399 | if (intel_crtc->active && crtc->fb) |
| 2400 | dev_priv->display.update_plane(crtc, crtc->fb, |
| 2401 | crtc->x, crtc->y); |
| 2402 | mutex_unlock(&crtc->mutex); |
| 2403 | } |
| 2404 | } |
| 2405 | |
| 2406 | static int |
| 2407 | intel_finish_fb(struct drm_framebuffer *old_fb) |
| 2408 | { |
| 2409 | struct drm_i915_gem_object *obj = to_intel_framebuffer(old_fb)->obj; |
| 2410 | struct drm_i915_private *dev_priv = obj->base.dev->dev_private; |
| 2411 | bool was_interruptible = dev_priv->mm.interruptible; |
| 2412 | int ret; |
| 2413 | |
| 2414 | /* Big Hammer, we also need to ensure that any pending |
| 2415 | * MI_WAIT_FOR_EVENT inside a user batch buffer on the |
| 2416 | * current scanout is retired before unpinning the old |
| 2417 | * framebuffer. |
| 2418 | * |
| 2419 | * This should only fail upon a hung GPU, in which case we |
| 2420 | * can safely continue. |
| 2421 | */ |
| 2422 | dev_priv->mm.interruptible = false; |
| 2423 | ret = i915_gem_object_finish_gpu(obj); |
| 2424 | dev_priv->mm.interruptible = was_interruptible; |
| 2425 | |
| 2426 | return ret; |
| 2427 | } |
| 2428 | |
| 2429 | static bool intel_crtc_has_pending_flip(struct drm_crtc *crtc) |
| 2430 | { |
| 2431 | struct drm_device *dev = crtc->dev; |
| 2432 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 2433 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 2434 | unsigned long flags; |
| 2435 | bool pending; |
| 2436 | |
| 2437 | if (i915_reset_in_progress(&dev_priv->gpu_error) || |
| 2438 | intel_crtc->reset_counter != atomic_read(&dev_priv->gpu_error.reset_counter)) |
| 2439 | return false; |
| 2440 | |
| 2441 | spin_lock_irqsave(&dev->event_lock, flags); |
| 2442 | pending = to_intel_crtc(crtc)->unpin_work != NULL; |
| 2443 | spin_unlock_irqrestore(&dev->event_lock, flags); |
| 2444 | |
| 2445 | return pending; |
| 2446 | } |
| 2447 | |
| 2448 | static int |
| 2449 | intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, |
| 2450 | struct drm_framebuffer *fb) |
| 2451 | { |
| 2452 | struct drm_device *dev = crtc->dev; |
| 2453 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 2454 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 2455 | struct drm_framebuffer *old_fb; |
| 2456 | int ret; |
| 2457 | |
| 2458 | if (intel_crtc_has_pending_flip(crtc)) { |
| 2459 | DRM_ERROR("pipe is still busy with an old pageflip\n"); |
| 2460 | return -EBUSY; |
| 2461 | } |
| 2462 | |
| 2463 | /* no fb bound */ |
| 2464 | if (!fb) { |
| 2465 | DRM_ERROR("No FB bound\n"); |
| 2466 | return 0; |
| 2467 | } |
| 2468 | |
| 2469 | if (intel_crtc->plane > INTEL_INFO(dev)->num_pipes) { |
| 2470 | DRM_ERROR("no plane for crtc: plane %c, num_pipes %d\n", |
| 2471 | plane_name(intel_crtc->plane), |
| 2472 | INTEL_INFO(dev)->num_pipes); |
| 2473 | return -EINVAL; |
| 2474 | } |
| 2475 | |
| 2476 | mutex_lock(&dev->struct_mutex); |
| 2477 | ret = intel_pin_and_fence_fb_obj(dev, |
| 2478 | to_intel_framebuffer(fb)->obj, |
| 2479 | NULL); |
| 2480 | if (ret != 0) { |
| 2481 | mutex_unlock(&dev->struct_mutex); |
| 2482 | DRM_ERROR("pin & fence failed\n"); |
| 2483 | return ret; |
| 2484 | } |
| 2485 | |
| 2486 | /* |
| 2487 | * Update pipe size and adjust fitter if needed: the reason for this is |
| 2488 | * that in compute_mode_changes we check the native mode (not the pfit |
| 2489 | * mode) to see if we can flip rather than do a full mode set. In the |
| 2490 | * fastboot case, we'll flip, but if we don't update the pipesrc and |
| 2491 | * pfit state, we'll end up with a big fb scanned out into the wrong |
| 2492 | * sized surface. |
| 2493 | * |
| 2494 | * To fix this properly, we need to hoist the checks up into |
| 2495 | * compute_mode_changes (or above), check the actual pfit state and |
| 2496 | * whether the platform allows pfit disable with pipe active, and only |
| 2497 | * then update the pipesrc and pfit state, even on the flip path. |
| 2498 | */ |
| 2499 | if (i915.fastboot) { |
| 2500 | const struct drm_display_mode *adjusted_mode = |
| 2501 | &intel_crtc->config.adjusted_mode; |
| 2502 | |
| 2503 | I915_WRITE(PIPESRC(intel_crtc->pipe), |
| 2504 | ((adjusted_mode->crtc_hdisplay - 1) << 16) | |
| 2505 | (adjusted_mode->crtc_vdisplay - 1)); |
| 2506 | if (!intel_crtc->config.pch_pfit.enabled && |
| 2507 | (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) || |
| 2508 | intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) { |
| 2509 | I915_WRITE(PF_CTL(intel_crtc->pipe), 0); |
| 2510 | I915_WRITE(PF_WIN_POS(intel_crtc->pipe), 0); |
| 2511 | I915_WRITE(PF_WIN_SZ(intel_crtc->pipe), 0); |
| 2512 | } |
| 2513 | intel_crtc->config.pipe_src_w = adjusted_mode->crtc_hdisplay; |
| 2514 | intel_crtc->config.pipe_src_h = adjusted_mode->crtc_vdisplay; |
| 2515 | } |
| 2516 | |
| 2517 | ret = dev_priv->display.update_plane(crtc, fb, x, y); |
| 2518 | if (ret) { |
| 2519 | intel_unpin_fb_obj(to_intel_framebuffer(fb)->obj); |
| 2520 | mutex_unlock(&dev->struct_mutex); |
| 2521 | DRM_ERROR("failed to update base address\n"); |
| 2522 | return ret; |
| 2523 | } |
| 2524 | |
| 2525 | old_fb = crtc->fb; |
| 2526 | crtc->fb = fb; |
| 2527 | crtc->x = x; |
| 2528 | crtc->y = y; |
| 2529 | |
| 2530 | if (old_fb) { |
| 2531 | if (intel_crtc->active && old_fb != fb) |
| 2532 | intel_wait_for_vblank(dev, intel_crtc->pipe); |
| 2533 | intel_unpin_fb_obj(to_intel_framebuffer(old_fb)->obj); |
| 2534 | } |
| 2535 | |
| 2536 | intel_update_fbc(dev); |
| 2537 | intel_edp_psr_update(dev); |
| 2538 | mutex_unlock(&dev->struct_mutex); |
| 2539 | |
| 2540 | return 0; |
| 2541 | } |
| 2542 | |
| 2543 | static void intel_fdi_normal_train(struct drm_crtc *crtc) |
| 2544 | { |
| 2545 | struct drm_device *dev = crtc->dev; |
| 2546 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 2547 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 2548 | int pipe = intel_crtc->pipe; |
| 2549 | u32 reg, temp; |
| 2550 | |
| 2551 | /* enable normal train */ |
| 2552 | reg = FDI_TX_CTL(pipe); |
| 2553 | temp = I915_READ(reg); |
| 2554 | if (IS_IVYBRIDGE(dev)) { |
| 2555 | temp &= ~FDI_LINK_TRAIN_NONE_IVB; |
| 2556 | temp |= FDI_LINK_TRAIN_NONE_IVB | FDI_TX_ENHANCE_FRAME_ENABLE; |
| 2557 | } else { |
| 2558 | temp &= ~FDI_LINK_TRAIN_NONE; |
| 2559 | temp |= FDI_LINK_TRAIN_NONE | FDI_TX_ENHANCE_FRAME_ENABLE; |
| 2560 | } |
| 2561 | I915_WRITE(reg, temp); |
| 2562 | |
| 2563 | reg = FDI_RX_CTL(pipe); |
| 2564 | temp = I915_READ(reg); |
| 2565 | if (HAS_PCH_CPT(dev)) { |
| 2566 | temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT; |
| 2567 | temp |= FDI_LINK_TRAIN_NORMAL_CPT; |
| 2568 | } else { |
| 2569 | temp &= ~FDI_LINK_TRAIN_NONE; |
| 2570 | temp |= FDI_LINK_TRAIN_NONE; |
| 2571 | } |
| 2572 | I915_WRITE(reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE); |
| 2573 | |
| 2574 | /* wait one idle pattern time */ |
| 2575 | POSTING_READ(reg); |
| 2576 | udelay(1000); |
| 2577 | |
| 2578 | /* IVB wants error correction enabled */ |
| 2579 | if (IS_IVYBRIDGE(dev)) |
| 2580 | I915_WRITE(reg, I915_READ(reg) | FDI_FS_ERRC_ENABLE | |
| 2581 | FDI_FE_ERRC_ENABLE); |
| 2582 | } |
| 2583 | |
| 2584 | static bool pipe_has_enabled_pch(struct intel_crtc *crtc) |
| 2585 | { |
| 2586 | return crtc->base.enabled && crtc->active && |
| 2587 | crtc->config.has_pch_encoder; |
| 2588 | } |
| 2589 | |
| 2590 | static void ivb_modeset_global_resources(struct drm_device *dev) |
| 2591 | { |
| 2592 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 2593 | struct intel_crtc *pipe_B_crtc = |
| 2594 | to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_B]); |
| 2595 | struct intel_crtc *pipe_C_crtc = |
| 2596 | to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_C]); |
| 2597 | uint32_t temp; |
| 2598 | |
| 2599 | /* |
| 2600 | * When everything is off disable fdi C so that we could enable fdi B |
| 2601 | * with all lanes. Note that we don't care about enabled pipes without |
| 2602 | * an enabled pch encoder. |
| 2603 | */ |
| 2604 | if (!pipe_has_enabled_pch(pipe_B_crtc) && |
| 2605 | !pipe_has_enabled_pch(pipe_C_crtc)) { |
| 2606 | WARN_ON(I915_READ(FDI_RX_CTL(PIPE_B)) & FDI_RX_ENABLE); |
| 2607 | WARN_ON(I915_READ(FDI_RX_CTL(PIPE_C)) & FDI_RX_ENABLE); |
| 2608 | |
| 2609 | temp = I915_READ(SOUTH_CHICKEN1); |
| 2610 | temp &= ~FDI_BC_BIFURCATION_SELECT; |
| 2611 | DRM_DEBUG_KMS("disabling fdi C rx\n"); |
| 2612 | I915_WRITE(SOUTH_CHICKEN1, temp); |
| 2613 | } |
| 2614 | } |
| 2615 | |
| 2616 | /* The FDI link training functions for ILK/Ibexpeak. */ |
| 2617 | static void ironlake_fdi_link_train(struct drm_crtc *crtc) |
| 2618 | { |
| 2619 | struct drm_device *dev = crtc->dev; |
| 2620 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 2621 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 2622 | int pipe = intel_crtc->pipe; |
| 2623 | int plane = intel_crtc->plane; |
| 2624 | u32 reg, temp, tries; |
| 2625 | |
| 2626 | /* FDI needs bits from pipe & plane first */ |
| 2627 | assert_pipe_enabled(dev_priv, pipe); |
| 2628 | assert_plane_enabled(dev_priv, plane); |
| 2629 | |
| 2630 | /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit |
| 2631 | for train result */ |
| 2632 | reg = FDI_RX_IMR(pipe); |
| 2633 | temp = I915_READ(reg); |
| 2634 | temp &= ~FDI_RX_SYMBOL_LOCK; |
| 2635 | temp &= ~FDI_RX_BIT_LOCK; |
| 2636 | I915_WRITE(reg, temp); |
| 2637 | I915_READ(reg); |
| 2638 | udelay(150); |
| 2639 | |
| 2640 | /* enable CPU FDI TX and PCH FDI RX */ |
| 2641 | reg = FDI_TX_CTL(pipe); |
| 2642 | temp = I915_READ(reg); |
| 2643 | temp &= ~FDI_DP_PORT_WIDTH_MASK; |
| 2644 | temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes); |
| 2645 | temp &= ~FDI_LINK_TRAIN_NONE; |
| 2646 | temp |= FDI_LINK_TRAIN_PATTERN_1; |
| 2647 | I915_WRITE(reg, temp | FDI_TX_ENABLE); |
| 2648 | |
| 2649 | reg = FDI_RX_CTL(pipe); |
| 2650 | temp = I915_READ(reg); |
| 2651 | temp &= ~FDI_LINK_TRAIN_NONE; |
| 2652 | temp |= FDI_LINK_TRAIN_PATTERN_1; |
| 2653 | I915_WRITE(reg, temp | FDI_RX_ENABLE); |
| 2654 | |
| 2655 | POSTING_READ(reg); |
| 2656 | udelay(150); |
| 2657 | |
| 2658 | /* Ironlake workaround, enable clock pointer after FDI enable*/ |
| 2659 | I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR); |
| 2660 | I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR | |
| 2661 | FDI_RX_PHASE_SYNC_POINTER_EN); |
| 2662 | |
| 2663 | reg = FDI_RX_IIR(pipe); |
| 2664 | for (tries = 0; tries < 5; tries++) { |
| 2665 | temp = I915_READ(reg); |
| 2666 | DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp); |
| 2667 | |
| 2668 | if ((temp & FDI_RX_BIT_LOCK)) { |
| 2669 | DRM_DEBUG_KMS("FDI train 1 done.\n"); |
| 2670 | I915_WRITE(reg, temp | FDI_RX_BIT_LOCK); |
| 2671 | break; |
| 2672 | } |
| 2673 | } |
| 2674 | if (tries == 5) |
| 2675 | DRM_ERROR("FDI train 1 fail!\n"); |
| 2676 | |
| 2677 | /* Train 2 */ |
| 2678 | reg = FDI_TX_CTL(pipe); |
| 2679 | temp = I915_READ(reg); |
| 2680 | temp &= ~FDI_LINK_TRAIN_NONE; |
| 2681 | temp |= FDI_LINK_TRAIN_PATTERN_2; |
| 2682 | I915_WRITE(reg, temp); |
| 2683 | |
| 2684 | reg = FDI_RX_CTL(pipe); |
| 2685 | temp = I915_READ(reg); |
| 2686 | temp &= ~FDI_LINK_TRAIN_NONE; |
| 2687 | temp |= FDI_LINK_TRAIN_PATTERN_2; |
| 2688 | I915_WRITE(reg, temp); |
| 2689 | |
| 2690 | POSTING_READ(reg); |
| 2691 | udelay(150); |
| 2692 | |
| 2693 | reg = FDI_RX_IIR(pipe); |
| 2694 | for (tries = 0; tries < 5; tries++) { |
| 2695 | temp = I915_READ(reg); |
| 2696 | DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp); |
| 2697 | |
| 2698 | if (temp & FDI_RX_SYMBOL_LOCK) { |
| 2699 | I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK); |
| 2700 | DRM_DEBUG_KMS("FDI train 2 done.\n"); |
| 2701 | break; |
| 2702 | } |
| 2703 | } |
| 2704 | if (tries == 5) |
| 2705 | DRM_ERROR("FDI train 2 fail!\n"); |
| 2706 | |
| 2707 | DRM_DEBUG_KMS("FDI train done\n"); |
| 2708 | |
| 2709 | } |
| 2710 | |
| 2711 | static const int snb_b_fdi_train_param[] = { |
| 2712 | FDI_LINK_TRAIN_400MV_0DB_SNB_B, |
| 2713 | FDI_LINK_TRAIN_400MV_6DB_SNB_B, |
| 2714 | FDI_LINK_TRAIN_600MV_3_5DB_SNB_B, |
| 2715 | FDI_LINK_TRAIN_800MV_0DB_SNB_B, |
| 2716 | }; |
| 2717 | |
| 2718 | /* The FDI link training functions for SNB/Cougarpoint. */ |
| 2719 | static void gen6_fdi_link_train(struct drm_crtc *crtc) |
| 2720 | { |
| 2721 | struct drm_device *dev = crtc->dev; |
| 2722 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 2723 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 2724 | int pipe = intel_crtc->pipe; |
| 2725 | u32 reg, temp, i, retry; |
| 2726 | |
| 2727 | /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit |
| 2728 | for train result */ |
| 2729 | reg = FDI_RX_IMR(pipe); |
| 2730 | temp = I915_READ(reg); |
| 2731 | temp &= ~FDI_RX_SYMBOL_LOCK; |
| 2732 | temp &= ~FDI_RX_BIT_LOCK; |
| 2733 | I915_WRITE(reg, temp); |
| 2734 | |
| 2735 | POSTING_READ(reg); |
| 2736 | udelay(150); |
| 2737 | |
| 2738 | /* enable CPU FDI TX and PCH FDI RX */ |
| 2739 | reg = FDI_TX_CTL(pipe); |
| 2740 | temp = I915_READ(reg); |
| 2741 | temp &= ~FDI_DP_PORT_WIDTH_MASK; |
| 2742 | temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes); |
| 2743 | temp &= ~FDI_LINK_TRAIN_NONE; |
| 2744 | temp |= FDI_LINK_TRAIN_PATTERN_1; |
| 2745 | temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK; |
| 2746 | /* SNB-B */ |
| 2747 | temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B; |
| 2748 | I915_WRITE(reg, temp | FDI_TX_ENABLE); |
| 2749 | |
| 2750 | I915_WRITE(FDI_RX_MISC(pipe), |
| 2751 | FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90); |
| 2752 | |
| 2753 | reg = FDI_RX_CTL(pipe); |
| 2754 | temp = I915_READ(reg); |
| 2755 | if (HAS_PCH_CPT(dev)) { |
| 2756 | temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT; |
| 2757 | temp |= FDI_LINK_TRAIN_PATTERN_1_CPT; |
| 2758 | } else { |
| 2759 | temp &= ~FDI_LINK_TRAIN_NONE; |
| 2760 | temp |= FDI_LINK_TRAIN_PATTERN_1; |
| 2761 | } |
| 2762 | I915_WRITE(reg, temp | FDI_RX_ENABLE); |
| 2763 | |
| 2764 | POSTING_READ(reg); |
| 2765 | udelay(150); |
| 2766 | |
| 2767 | for (i = 0; i < 4; i++) { |
| 2768 | reg = FDI_TX_CTL(pipe); |
| 2769 | temp = I915_READ(reg); |
| 2770 | temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK; |
| 2771 | temp |= snb_b_fdi_train_param[i]; |
| 2772 | I915_WRITE(reg, temp); |
| 2773 | |
| 2774 | POSTING_READ(reg); |
| 2775 | udelay(500); |
| 2776 | |
| 2777 | for (retry = 0; retry < 5; retry++) { |
| 2778 | reg = FDI_RX_IIR(pipe); |
| 2779 | temp = I915_READ(reg); |
| 2780 | DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp); |
| 2781 | if (temp & FDI_RX_BIT_LOCK) { |
| 2782 | I915_WRITE(reg, temp | FDI_RX_BIT_LOCK); |
| 2783 | DRM_DEBUG_KMS("FDI train 1 done.\n"); |
| 2784 | break; |
| 2785 | } |
| 2786 | udelay(50); |
| 2787 | } |
| 2788 | if (retry < 5) |
| 2789 | break; |
| 2790 | } |
| 2791 | if (i == 4) |
| 2792 | DRM_ERROR("FDI train 1 fail!\n"); |
| 2793 | |
| 2794 | /* Train 2 */ |
| 2795 | reg = FDI_TX_CTL(pipe); |
| 2796 | temp = I915_READ(reg); |
| 2797 | temp &= ~FDI_LINK_TRAIN_NONE; |
| 2798 | temp |= FDI_LINK_TRAIN_PATTERN_2; |
| 2799 | if (IS_GEN6(dev)) { |
| 2800 | temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK; |
| 2801 | /* SNB-B */ |
| 2802 | temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B; |
| 2803 | } |
| 2804 | I915_WRITE(reg, temp); |
| 2805 | |
| 2806 | reg = FDI_RX_CTL(pipe); |
| 2807 | temp = I915_READ(reg); |
| 2808 | if (HAS_PCH_CPT(dev)) { |
| 2809 | temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT; |
| 2810 | temp |= FDI_LINK_TRAIN_PATTERN_2_CPT; |
| 2811 | } else { |
| 2812 | temp &= ~FDI_LINK_TRAIN_NONE; |
| 2813 | temp |= FDI_LINK_TRAIN_PATTERN_2; |
| 2814 | } |
| 2815 | I915_WRITE(reg, temp); |
| 2816 | |
| 2817 | POSTING_READ(reg); |
| 2818 | udelay(150); |
| 2819 | |
| 2820 | for (i = 0; i < 4; i++) { |
| 2821 | reg = FDI_TX_CTL(pipe); |
| 2822 | temp = I915_READ(reg); |
| 2823 | temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK; |
| 2824 | temp |= snb_b_fdi_train_param[i]; |
| 2825 | I915_WRITE(reg, temp); |
| 2826 | |
| 2827 | POSTING_READ(reg); |
| 2828 | udelay(500); |
| 2829 | |
| 2830 | for (retry = 0; retry < 5; retry++) { |
| 2831 | reg = FDI_RX_IIR(pipe); |
| 2832 | temp = I915_READ(reg); |
| 2833 | DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp); |
| 2834 | if (temp & FDI_RX_SYMBOL_LOCK) { |
| 2835 | I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK); |
| 2836 | DRM_DEBUG_KMS("FDI train 2 done.\n"); |
| 2837 | break; |
| 2838 | } |
| 2839 | udelay(50); |
| 2840 | } |
| 2841 | if (retry < 5) |
| 2842 | break; |
| 2843 | } |
| 2844 | if (i == 4) |
| 2845 | DRM_ERROR("FDI train 2 fail!\n"); |
| 2846 | |
| 2847 | DRM_DEBUG_KMS("FDI train done.\n"); |
| 2848 | } |
| 2849 | |
| 2850 | /* Manual link training for Ivy Bridge A0 parts */ |
| 2851 | static void ivb_manual_fdi_link_train(struct drm_crtc *crtc) |
| 2852 | { |
| 2853 | struct drm_device *dev = crtc->dev; |
| 2854 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 2855 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 2856 | int pipe = intel_crtc->pipe; |
| 2857 | u32 reg, temp, i, j; |
| 2858 | |
| 2859 | /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit |
| 2860 | for train result */ |
| 2861 | reg = FDI_RX_IMR(pipe); |
| 2862 | temp = I915_READ(reg); |
| 2863 | temp &= ~FDI_RX_SYMBOL_LOCK; |
| 2864 | temp &= ~FDI_RX_BIT_LOCK; |
| 2865 | I915_WRITE(reg, temp); |
| 2866 | |
| 2867 | POSTING_READ(reg); |
| 2868 | udelay(150); |
| 2869 | |
| 2870 | DRM_DEBUG_KMS("FDI_RX_IIR before link train 0x%x\n", |
| 2871 | I915_READ(FDI_RX_IIR(pipe))); |
| 2872 | |
| 2873 | /* Try each vswing and preemphasis setting twice before moving on */ |
| 2874 | for (j = 0; j < ARRAY_SIZE(snb_b_fdi_train_param) * 2; j++) { |
| 2875 | /* disable first in case we need to retry */ |
| 2876 | reg = FDI_TX_CTL(pipe); |
| 2877 | temp = I915_READ(reg); |
| 2878 | temp &= ~(FDI_LINK_TRAIN_AUTO | FDI_LINK_TRAIN_NONE_IVB); |
| 2879 | temp &= ~FDI_TX_ENABLE; |
| 2880 | I915_WRITE(reg, temp); |
| 2881 | |
| 2882 | reg = FDI_RX_CTL(pipe); |
| 2883 | temp = I915_READ(reg); |
| 2884 | temp &= ~FDI_LINK_TRAIN_AUTO; |
| 2885 | temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT; |
| 2886 | temp &= ~FDI_RX_ENABLE; |
| 2887 | I915_WRITE(reg, temp); |
| 2888 | |
| 2889 | /* enable CPU FDI TX and PCH FDI RX */ |
| 2890 | reg = FDI_TX_CTL(pipe); |
| 2891 | temp = I915_READ(reg); |
| 2892 | temp &= ~FDI_DP_PORT_WIDTH_MASK; |
| 2893 | temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes); |
| 2894 | temp |= FDI_LINK_TRAIN_PATTERN_1_IVB; |
| 2895 | temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK; |
| 2896 | temp |= snb_b_fdi_train_param[j/2]; |
| 2897 | temp |= FDI_COMPOSITE_SYNC; |
| 2898 | I915_WRITE(reg, temp | FDI_TX_ENABLE); |
| 2899 | |
| 2900 | I915_WRITE(FDI_RX_MISC(pipe), |
| 2901 | FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90); |
| 2902 | |
| 2903 | reg = FDI_RX_CTL(pipe); |
| 2904 | temp = I915_READ(reg); |
| 2905 | temp |= FDI_LINK_TRAIN_PATTERN_1_CPT; |
| 2906 | temp |= FDI_COMPOSITE_SYNC; |
| 2907 | I915_WRITE(reg, temp | FDI_RX_ENABLE); |
| 2908 | |
| 2909 | POSTING_READ(reg); |
| 2910 | udelay(1); /* should be 0.5us */ |
| 2911 | |
| 2912 | for (i = 0; i < 4; i++) { |
| 2913 | reg = FDI_RX_IIR(pipe); |
| 2914 | temp = I915_READ(reg); |
| 2915 | DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp); |
| 2916 | |
| 2917 | if (temp & FDI_RX_BIT_LOCK || |
| 2918 | (I915_READ(reg) & FDI_RX_BIT_LOCK)) { |
| 2919 | I915_WRITE(reg, temp | FDI_RX_BIT_LOCK); |
| 2920 | DRM_DEBUG_KMS("FDI train 1 done, level %i.\n", |
| 2921 | i); |
| 2922 | break; |
| 2923 | } |
| 2924 | udelay(1); /* should be 0.5us */ |
| 2925 | } |
| 2926 | if (i == 4) { |
| 2927 | DRM_DEBUG_KMS("FDI train 1 fail on vswing %d\n", j / 2); |
| 2928 | continue; |
| 2929 | } |
| 2930 | |
| 2931 | /* Train 2 */ |
| 2932 | reg = FDI_TX_CTL(pipe); |
| 2933 | temp = I915_READ(reg); |
| 2934 | temp &= ~FDI_LINK_TRAIN_NONE_IVB; |
| 2935 | temp |= FDI_LINK_TRAIN_PATTERN_2_IVB; |
| 2936 | I915_WRITE(reg, temp); |
| 2937 | |
| 2938 | reg = FDI_RX_CTL(pipe); |
| 2939 | temp = I915_READ(reg); |
| 2940 | temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT; |
| 2941 | temp |= FDI_LINK_TRAIN_PATTERN_2_CPT; |
| 2942 | I915_WRITE(reg, temp); |
| 2943 | |
| 2944 | POSTING_READ(reg); |
| 2945 | udelay(2); /* should be 1.5us */ |
| 2946 | |
| 2947 | for (i = 0; i < 4; i++) { |
| 2948 | reg = FDI_RX_IIR(pipe); |
| 2949 | temp = I915_READ(reg); |
| 2950 | DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp); |
| 2951 | |
| 2952 | if (temp & FDI_RX_SYMBOL_LOCK || |
| 2953 | (I915_READ(reg) & FDI_RX_SYMBOL_LOCK)) { |
| 2954 | I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK); |
| 2955 | DRM_DEBUG_KMS("FDI train 2 done, level %i.\n", |
| 2956 | i); |
| 2957 | goto train_done; |
| 2958 | } |
| 2959 | udelay(2); /* should be 1.5us */ |
| 2960 | } |
| 2961 | if (i == 4) |
| 2962 | DRM_DEBUG_KMS("FDI train 2 fail on vswing %d\n", j / 2); |
| 2963 | } |
| 2964 | |
| 2965 | train_done: |
| 2966 | DRM_DEBUG_KMS("FDI train done.\n"); |
| 2967 | } |
| 2968 | |
| 2969 | static void ironlake_fdi_pll_enable(struct intel_crtc *intel_crtc) |
| 2970 | { |
| 2971 | struct drm_device *dev = intel_crtc->base.dev; |
| 2972 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 2973 | int pipe = intel_crtc->pipe; |
| 2974 | u32 reg, temp; |
| 2975 | |
| 2976 | |
| 2977 | /* enable PCH FDI RX PLL, wait warmup plus DMI latency */ |
| 2978 | reg = FDI_RX_CTL(pipe); |
| 2979 | temp = I915_READ(reg); |
| 2980 | temp &= ~(FDI_DP_PORT_WIDTH_MASK | (0x7 << 16)); |
| 2981 | temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes); |
| 2982 | temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11; |
| 2983 | I915_WRITE(reg, temp | FDI_RX_PLL_ENABLE); |
| 2984 | |
| 2985 | POSTING_READ(reg); |
| 2986 | udelay(200); |
| 2987 | |
| 2988 | /* Switch from Rawclk to PCDclk */ |
| 2989 | temp = I915_READ(reg); |
| 2990 | I915_WRITE(reg, temp | FDI_PCDCLK); |
| 2991 | |
| 2992 | POSTING_READ(reg); |
| 2993 | udelay(200); |
| 2994 | |
| 2995 | /* Enable CPU FDI TX PLL, always on for Ironlake */ |
| 2996 | reg = FDI_TX_CTL(pipe); |
| 2997 | temp = I915_READ(reg); |
| 2998 | if ((temp & FDI_TX_PLL_ENABLE) == 0) { |
| 2999 | I915_WRITE(reg, temp | FDI_TX_PLL_ENABLE); |
| 3000 | |
| 3001 | POSTING_READ(reg); |
| 3002 | udelay(100); |
| 3003 | } |
| 3004 | } |
| 3005 | |
| 3006 | static void ironlake_fdi_pll_disable(struct intel_crtc *intel_crtc) |
| 3007 | { |
| 3008 | struct drm_device *dev = intel_crtc->base.dev; |
| 3009 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 3010 | int pipe = intel_crtc->pipe; |
| 3011 | u32 reg, temp; |
| 3012 | |
| 3013 | /* Switch from PCDclk to Rawclk */ |
| 3014 | reg = FDI_RX_CTL(pipe); |
| 3015 | temp = I915_READ(reg); |
| 3016 | I915_WRITE(reg, temp & ~FDI_PCDCLK); |
| 3017 | |
| 3018 | /* Disable CPU FDI TX PLL */ |
| 3019 | reg = FDI_TX_CTL(pipe); |
| 3020 | temp = I915_READ(reg); |
| 3021 | I915_WRITE(reg, temp & ~FDI_TX_PLL_ENABLE); |
| 3022 | |
| 3023 | POSTING_READ(reg); |
| 3024 | udelay(100); |
| 3025 | |
| 3026 | reg = FDI_RX_CTL(pipe); |
| 3027 | temp = I915_READ(reg); |
| 3028 | I915_WRITE(reg, temp & ~FDI_RX_PLL_ENABLE); |
| 3029 | |
| 3030 | /* Wait for the clocks to turn off. */ |
| 3031 | POSTING_READ(reg); |
| 3032 | udelay(100); |
| 3033 | } |
| 3034 | |
| 3035 | static void ironlake_fdi_disable(struct drm_crtc *crtc) |
| 3036 | { |
| 3037 | struct drm_device *dev = crtc->dev; |
| 3038 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 3039 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 3040 | int pipe = intel_crtc->pipe; |
| 3041 | u32 reg, temp; |
| 3042 | |
| 3043 | /* disable CPU FDI tx and PCH FDI rx */ |
| 3044 | reg = FDI_TX_CTL(pipe); |
| 3045 | temp = I915_READ(reg); |
| 3046 | I915_WRITE(reg, temp & ~FDI_TX_ENABLE); |
| 3047 | POSTING_READ(reg); |
| 3048 | |
| 3049 | reg = FDI_RX_CTL(pipe); |
| 3050 | temp = I915_READ(reg); |
| 3051 | temp &= ~(0x7 << 16); |
| 3052 | temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11; |
| 3053 | I915_WRITE(reg, temp & ~FDI_RX_ENABLE); |
| 3054 | |
| 3055 | POSTING_READ(reg); |
| 3056 | udelay(100); |
| 3057 | |
| 3058 | /* Ironlake workaround, disable clock pointer after downing FDI */ |
| 3059 | if (HAS_PCH_IBX(dev)) { |
| 3060 | I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR); |
| 3061 | } |
| 3062 | |
| 3063 | /* still set train pattern 1 */ |
| 3064 | reg = FDI_TX_CTL(pipe); |
| 3065 | temp = I915_READ(reg); |
| 3066 | temp &= ~FDI_LINK_TRAIN_NONE; |
| 3067 | temp |= FDI_LINK_TRAIN_PATTERN_1; |
| 3068 | I915_WRITE(reg, temp); |
| 3069 | |
| 3070 | reg = FDI_RX_CTL(pipe); |
| 3071 | temp = I915_READ(reg); |
| 3072 | if (HAS_PCH_CPT(dev)) { |
| 3073 | temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT; |
| 3074 | temp |= FDI_LINK_TRAIN_PATTERN_1_CPT; |
| 3075 | } else { |
| 3076 | temp &= ~FDI_LINK_TRAIN_NONE; |
| 3077 | temp |= FDI_LINK_TRAIN_PATTERN_1; |
| 3078 | } |
| 3079 | /* BPC in FDI rx is consistent with that in PIPECONF */ |
| 3080 | temp &= ~(0x07 << 16); |
| 3081 | temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11; |
| 3082 | I915_WRITE(reg, temp); |
| 3083 | |
| 3084 | POSTING_READ(reg); |
| 3085 | udelay(100); |
| 3086 | } |
| 3087 | |
| 3088 | bool intel_has_pending_fb_unpin(struct drm_device *dev) |
| 3089 | { |
| 3090 | struct intel_crtc *crtc; |
| 3091 | |
| 3092 | /* Note that we don't need to be called with mode_config.lock here |
| 3093 | * as our list of CRTC objects is static for the lifetime of the |
| 3094 | * device and so cannot disappear as we iterate. Similarly, we can |
| 3095 | * happily treat the predicates as racy, atomic checks as userspace |
| 3096 | * cannot claim and pin a new fb without at least acquring the |
| 3097 | * struct_mutex and so serialising with us. |
| 3098 | */ |
| 3099 | list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head) { |
| 3100 | if (atomic_read(&crtc->unpin_work_count) == 0) |
| 3101 | continue; |
| 3102 | |
| 3103 | if (crtc->unpin_work) |
| 3104 | intel_wait_for_vblank(dev, crtc->pipe); |
| 3105 | |
| 3106 | return true; |
| 3107 | } |
| 3108 | |
| 3109 | return false; |
| 3110 | } |
| 3111 | |
| 3112 | static void intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc) |
| 3113 | { |
| 3114 | struct drm_device *dev = crtc->dev; |
| 3115 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 3116 | |
| 3117 | if (crtc->fb == NULL) |
| 3118 | return; |
| 3119 | |
| 3120 | WARN_ON(waitqueue_active(&dev_priv->pending_flip_queue)); |
| 3121 | |
| 3122 | wait_event(dev_priv->pending_flip_queue, |
| 3123 | !intel_crtc_has_pending_flip(crtc)); |
| 3124 | |
| 3125 | mutex_lock(&dev->struct_mutex); |
| 3126 | intel_finish_fb(crtc->fb); |
| 3127 | mutex_unlock(&dev->struct_mutex); |
| 3128 | } |
| 3129 | |
| 3130 | /* Program iCLKIP clock to the desired frequency */ |
| 3131 | static void lpt_program_iclkip(struct drm_crtc *crtc) |
| 3132 | { |
| 3133 | struct drm_device *dev = crtc->dev; |
| 3134 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 3135 | int clock = to_intel_crtc(crtc)->config.adjusted_mode.crtc_clock; |
| 3136 | u32 divsel, phaseinc, auxdiv, phasedir = 0; |
| 3137 | u32 temp; |
| 3138 | |
| 3139 | mutex_lock(&dev_priv->dpio_lock); |
| 3140 | |
| 3141 | /* It is necessary to ungate the pixclk gate prior to programming |
| 3142 | * the divisors, and gate it back when it is done. |
| 3143 | */ |
| 3144 | I915_WRITE(PIXCLK_GATE, PIXCLK_GATE_GATE); |
| 3145 | |
| 3146 | /* Disable SSCCTL */ |
| 3147 | intel_sbi_write(dev_priv, SBI_SSCCTL6, |
| 3148 | intel_sbi_read(dev_priv, SBI_SSCCTL6, SBI_ICLK) | |
| 3149 | SBI_SSCCTL_DISABLE, |
| 3150 | SBI_ICLK); |
| 3151 | |
| 3152 | /* 20MHz is a corner case which is out of range for the 7-bit divisor */ |
| 3153 | if (clock == 20000) { |
| 3154 | auxdiv = 1; |
| 3155 | divsel = 0x41; |
| 3156 | phaseinc = 0x20; |
| 3157 | } else { |
| 3158 | /* The iCLK virtual clock root frequency is in MHz, |
| 3159 | * but the adjusted_mode->crtc_clock in in KHz. To get the |
| 3160 | * divisors, it is necessary to divide one by another, so we |
| 3161 | * convert the virtual clock precision to KHz here for higher |
| 3162 | * precision. |
| 3163 | */ |
| 3164 | u32 iclk_virtual_root_freq = 172800 * 1000; |
| 3165 | u32 iclk_pi_range = 64; |
| 3166 | u32 desired_divisor, msb_divisor_value, pi_value; |
| 3167 | |
| 3168 | desired_divisor = (iclk_virtual_root_freq / clock); |
| 3169 | msb_divisor_value = desired_divisor / iclk_pi_range; |
| 3170 | pi_value = desired_divisor % iclk_pi_range; |
| 3171 | |
| 3172 | auxdiv = 0; |
| 3173 | divsel = msb_divisor_value - 2; |
| 3174 | phaseinc = pi_value; |
| 3175 | } |
| 3176 | |
| 3177 | /* This should not happen with any sane values */ |
| 3178 | WARN_ON(SBI_SSCDIVINTPHASE_DIVSEL(divsel) & |
| 3179 | ~SBI_SSCDIVINTPHASE_DIVSEL_MASK); |
| 3180 | WARN_ON(SBI_SSCDIVINTPHASE_DIR(phasedir) & |
| 3181 | ~SBI_SSCDIVINTPHASE_INCVAL_MASK); |
| 3182 | |
| 3183 | DRM_DEBUG_KMS("iCLKIP clock: found settings for %dKHz refresh rate: auxdiv=%x, divsel=%x, phasedir=%x, phaseinc=%x\n", |
| 3184 | clock, |
| 3185 | auxdiv, |
| 3186 | divsel, |
| 3187 | phasedir, |
| 3188 | phaseinc); |
| 3189 | |
| 3190 | /* Program SSCDIVINTPHASE6 */ |
| 3191 | temp = intel_sbi_read(dev_priv, SBI_SSCDIVINTPHASE6, SBI_ICLK); |
| 3192 | temp &= ~SBI_SSCDIVINTPHASE_DIVSEL_MASK; |
| 3193 | temp |= SBI_SSCDIVINTPHASE_DIVSEL(divsel); |
| 3194 | temp &= ~SBI_SSCDIVINTPHASE_INCVAL_MASK; |
| 3195 | temp |= SBI_SSCDIVINTPHASE_INCVAL(phaseinc); |
| 3196 | temp |= SBI_SSCDIVINTPHASE_DIR(phasedir); |
| 3197 | temp |= SBI_SSCDIVINTPHASE_PROPAGATE; |
| 3198 | intel_sbi_write(dev_priv, SBI_SSCDIVINTPHASE6, temp, SBI_ICLK); |
| 3199 | |
| 3200 | /* Program SSCAUXDIV */ |
| 3201 | temp = intel_sbi_read(dev_priv, SBI_SSCAUXDIV6, SBI_ICLK); |
| 3202 | temp &= ~SBI_SSCAUXDIV_FINALDIV2SEL(1); |
| 3203 | temp |= SBI_SSCAUXDIV_FINALDIV2SEL(auxdiv); |
| 3204 | intel_sbi_write(dev_priv, SBI_SSCAUXDIV6, temp, SBI_ICLK); |
| 3205 | |
| 3206 | /* Enable modulator and associated divider */ |
| 3207 | temp = intel_sbi_read(dev_priv, SBI_SSCCTL6, SBI_ICLK); |
| 3208 | temp &= ~SBI_SSCCTL_DISABLE; |
| 3209 | intel_sbi_write(dev_priv, SBI_SSCCTL6, temp, SBI_ICLK); |
| 3210 | |
| 3211 | /* Wait for initialization time */ |
| 3212 | udelay(24); |
| 3213 | |
| 3214 | I915_WRITE(PIXCLK_GATE, PIXCLK_GATE_UNGATE); |
| 3215 | |
| 3216 | mutex_unlock(&dev_priv->dpio_lock); |
| 3217 | } |
| 3218 | |
| 3219 | static void ironlake_pch_transcoder_set_timings(struct intel_crtc *crtc, |
| 3220 | enum pipe pch_transcoder) |
| 3221 | { |
| 3222 | struct drm_device *dev = crtc->base.dev; |
| 3223 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 3224 | enum transcoder cpu_transcoder = crtc->config.cpu_transcoder; |
| 3225 | |
| 3226 | I915_WRITE(PCH_TRANS_HTOTAL(pch_transcoder), |
| 3227 | I915_READ(HTOTAL(cpu_transcoder))); |
| 3228 | I915_WRITE(PCH_TRANS_HBLANK(pch_transcoder), |
| 3229 | I915_READ(HBLANK(cpu_transcoder))); |
| 3230 | I915_WRITE(PCH_TRANS_HSYNC(pch_transcoder), |
| 3231 | I915_READ(HSYNC(cpu_transcoder))); |
| 3232 | |
| 3233 | I915_WRITE(PCH_TRANS_VTOTAL(pch_transcoder), |
| 3234 | I915_READ(VTOTAL(cpu_transcoder))); |
| 3235 | I915_WRITE(PCH_TRANS_VBLANK(pch_transcoder), |
| 3236 | I915_READ(VBLANK(cpu_transcoder))); |
| 3237 | I915_WRITE(PCH_TRANS_VSYNC(pch_transcoder), |
| 3238 | I915_READ(VSYNC(cpu_transcoder))); |
| 3239 | I915_WRITE(PCH_TRANS_VSYNCSHIFT(pch_transcoder), |
| 3240 | I915_READ(VSYNCSHIFT(cpu_transcoder))); |
| 3241 | } |
| 3242 | |
| 3243 | static void cpt_enable_fdi_bc_bifurcation(struct drm_device *dev) |
| 3244 | { |
| 3245 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 3246 | uint32_t temp; |
| 3247 | |
| 3248 | temp = I915_READ(SOUTH_CHICKEN1); |
| 3249 | if (temp & FDI_BC_BIFURCATION_SELECT) |
| 3250 | return; |
| 3251 | |
| 3252 | WARN_ON(I915_READ(FDI_RX_CTL(PIPE_B)) & FDI_RX_ENABLE); |
| 3253 | WARN_ON(I915_READ(FDI_RX_CTL(PIPE_C)) & FDI_RX_ENABLE); |
| 3254 | |
| 3255 | temp |= FDI_BC_BIFURCATION_SELECT; |
| 3256 | DRM_DEBUG_KMS("enabling fdi C rx\n"); |
| 3257 | I915_WRITE(SOUTH_CHICKEN1, temp); |
| 3258 | POSTING_READ(SOUTH_CHICKEN1); |
| 3259 | } |
| 3260 | |
| 3261 | static void ivybridge_update_fdi_bc_bifurcation(struct intel_crtc *intel_crtc) |
| 3262 | { |
| 3263 | struct drm_device *dev = intel_crtc->base.dev; |
| 3264 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 3265 | |
| 3266 | switch (intel_crtc->pipe) { |
| 3267 | case PIPE_A: |
| 3268 | break; |
| 3269 | case PIPE_B: |
| 3270 | if (intel_crtc->config.fdi_lanes > 2) |
| 3271 | WARN_ON(I915_READ(SOUTH_CHICKEN1) & FDI_BC_BIFURCATION_SELECT); |
| 3272 | else |
| 3273 | cpt_enable_fdi_bc_bifurcation(dev); |
| 3274 | |
| 3275 | break; |
| 3276 | case PIPE_C: |
| 3277 | cpt_enable_fdi_bc_bifurcation(dev); |
| 3278 | |
| 3279 | break; |
| 3280 | default: |
| 3281 | BUG(); |
| 3282 | } |
| 3283 | } |
| 3284 | |
| 3285 | /* |
| 3286 | * Enable PCH resources required for PCH ports: |
| 3287 | * - PCH PLLs |
| 3288 | * - FDI training & RX/TX |
| 3289 | * - update transcoder timings |
| 3290 | * - DP transcoding bits |
| 3291 | * - transcoder |
| 3292 | */ |
| 3293 | static void ironlake_pch_enable(struct drm_crtc *crtc) |
| 3294 | { |
| 3295 | struct drm_device *dev = crtc->dev; |
| 3296 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 3297 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 3298 | int pipe = intel_crtc->pipe; |
| 3299 | u32 reg, temp; |
| 3300 | |
| 3301 | assert_pch_transcoder_disabled(dev_priv, pipe); |
| 3302 | |
| 3303 | if (IS_IVYBRIDGE(dev)) |
| 3304 | ivybridge_update_fdi_bc_bifurcation(intel_crtc); |
| 3305 | |
| 3306 | /* Write the TU size bits before fdi link training, so that error |
| 3307 | * detection works. */ |
| 3308 | I915_WRITE(FDI_RX_TUSIZE1(pipe), |
| 3309 | I915_READ(PIPE_DATA_M1(pipe)) & TU_SIZE_MASK); |
| 3310 | |
| 3311 | /* For PCH output, training FDI link */ |
| 3312 | dev_priv->display.fdi_link_train(crtc); |
| 3313 | |
| 3314 | /* We need to program the right clock selection before writing the pixel |
| 3315 | * mutliplier into the DPLL. */ |
| 3316 | if (HAS_PCH_CPT(dev)) { |
| 3317 | u32 sel; |
| 3318 | |
| 3319 | temp = I915_READ(PCH_DPLL_SEL); |
| 3320 | temp |= TRANS_DPLL_ENABLE(pipe); |
| 3321 | sel = TRANS_DPLLB_SEL(pipe); |
| 3322 | if (intel_crtc->config.shared_dpll == DPLL_ID_PCH_PLL_B) |
| 3323 | temp |= sel; |
| 3324 | else |
| 3325 | temp &= ~sel; |
| 3326 | I915_WRITE(PCH_DPLL_SEL, temp); |
| 3327 | } |
| 3328 | |
| 3329 | /* XXX: pch pll's can be enabled any time before we enable the PCH |
| 3330 | * transcoder, and we actually should do this to not upset any PCH |
| 3331 | * transcoder that already use the clock when we share it. |
| 3332 | * |
| 3333 | * Note that enable_shared_dpll tries to do the right thing, but |
| 3334 | * get_shared_dpll unconditionally resets the pll - we need that to have |
| 3335 | * the right LVDS enable sequence. */ |
| 3336 | ironlake_enable_shared_dpll(intel_crtc); |
| 3337 | |
| 3338 | /* set transcoder timing, panel must allow it */ |
| 3339 | assert_panel_unlocked(dev_priv, pipe); |
| 3340 | ironlake_pch_transcoder_set_timings(intel_crtc, pipe); |
| 3341 | |
| 3342 | intel_fdi_normal_train(crtc); |
| 3343 | |
| 3344 | /* For PCH DP, enable TRANS_DP_CTL */ |
| 3345 | if (HAS_PCH_CPT(dev) && |
| 3346 | (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) || |
| 3347 | intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) { |
| 3348 | u32 bpc = (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) >> 5; |
| 3349 | reg = TRANS_DP_CTL(pipe); |
| 3350 | temp = I915_READ(reg); |
| 3351 | temp &= ~(TRANS_DP_PORT_SEL_MASK | |
| 3352 | TRANS_DP_SYNC_MASK | |
| 3353 | TRANS_DP_BPC_MASK); |
| 3354 | temp |= (TRANS_DP_OUTPUT_ENABLE | |
| 3355 | TRANS_DP_ENH_FRAMING); |
| 3356 | temp |= bpc << 9; /* same format but at 11:9 */ |
| 3357 | |
| 3358 | if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC) |
| 3359 | temp |= TRANS_DP_HSYNC_ACTIVE_HIGH; |
| 3360 | if (crtc->mode.flags & DRM_MODE_FLAG_PVSYNC) |
| 3361 | temp |= TRANS_DP_VSYNC_ACTIVE_HIGH; |
| 3362 | |
| 3363 | switch (intel_trans_dp_port_sel(crtc)) { |
| 3364 | case PCH_DP_B: |
| 3365 | temp |= TRANS_DP_PORT_SEL_B; |
| 3366 | break; |
| 3367 | case PCH_DP_C: |
| 3368 | temp |= TRANS_DP_PORT_SEL_C; |
| 3369 | break; |
| 3370 | case PCH_DP_D: |
| 3371 | temp |= TRANS_DP_PORT_SEL_D; |
| 3372 | break; |
| 3373 | default: |
| 3374 | BUG(); |
| 3375 | } |
| 3376 | |
| 3377 | I915_WRITE(reg, temp); |
| 3378 | } |
| 3379 | |
| 3380 | ironlake_enable_pch_transcoder(dev_priv, pipe); |
| 3381 | } |
| 3382 | |
| 3383 | static void lpt_pch_enable(struct drm_crtc *crtc) |
| 3384 | { |
| 3385 | struct drm_device *dev = crtc->dev; |
| 3386 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 3387 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 3388 | enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder; |
| 3389 | |
| 3390 | assert_pch_transcoder_disabled(dev_priv, TRANSCODER_A); |
| 3391 | |
| 3392 | lpt_program_iclkip(crtc); |
| 3393 | |
| 3394 | /* Set transcoder timing. */ |
| 3395 | ironlake_pch_transcoder_set_timings(intel_crtc, PIPE_A); |
| 3396 | |
| 3397 | lpt_enable_pch_transcoder(dev_priv, cpu_transcoder); |
| 3398 | } |
| 3399 | |
| 3400 | static void intel_put_shared_dpll(struct intel_crtc *crtc) |
| 3401 | { |
| 3402 | struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc); |
| 3403 | |
| 3404 | if (pll == NULL) |
| 3405 | return; |
| 3406 | |
| 3407 | if (pll->refcount == 0) { |
| 3408 | WARN(1, "bad %s refcount\n", pll->name); |
| 3409 | return; |
| 3410 | } |
| 3411 | |
| 3412 | if (--pll->refcount == 0) { |
| 3413 | WARN_ON(pll->on); |
| 3414 | WARN_ON(pll->active); |
| 3415 | } |
| 3416 | |
| 3417 | crtc->config.shared_dpll = DPLL_ID_PRIVATE; |
| 3418 | } |
| 3419 | |
| 3420 | static struct intel_shared_dpll *intel_get_shared_dpll(struct intel_crtc *crtc) |
| 3421 | { |
| 3422 | struct drm_i915_private *dev_priv = crtc->base.dev->dev_private; |
| 3423 | struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc); |
| 3424 | enum intel_dpll_id i; |
| 3425 | |
| 3426 | if (pll) { |
| 3427 | DRM_DEBUG_KMS("CRTC:%d dropping existing %s\n", |
| 3428 | crtc->base.base.id, pll->name); |
| 3429 | intel_put_shared_dpll(crtc); |
| 3430 | } |
| 3431 | |
| 3432 | if (HAS_PCH_IBX(dev_priv->dev)) { |
| 3433 | /* Ironlake PCH has a fixed PLL->PCH pipe mapping. */ |
| 3434 | i = (enum intel_dpll_id) crtc->pipe; |
| 3435 | pll = &dev_priv->shared_dplls[i]; |
| 3436 | |
| 3437 | DRM_DEBUG_KMS("CRTC:%d using pre-allocated %s\n", |
| 3438 | crtc->base.base.id, pll->name); |
| 3439 | |
| 3440 | goto found; |
| 3441 | } |
| 3442 | |
| 3443 | for (i = 0; i < dev_priv->num_shared_dpll; i++) { |
| 3444 | pll = &dev_priv->shared_dplls[i]; |
| 3445 | |
| 3446 | /* Only want to check enabled timings first */ |
| 3447 | if (pll->refcount == 0) |
| 3448 | continue; |
| 3449 | |
| 3450 | if (memcmp(&crtc->config.dpll_hw_state, &pll->hw_state, |
| 3451 | sizeof(pll->hw_state)) == 0) { |
| 3452 | DRM_DEBUG_KMS("CRTC:%d sharing existing %s (refcount %d, ative %d)\n", |
| 3453 | crtc->base.base.id, |
| 3454 | pll->name, pll->refcount, pll->active); |
| 3455 | |
| 3456 | goto found; |
| 3457 | } |
| 3458 | } |
| 3459 | |
| 3460 | /* Ok no matching timings, maybe there's a free one? */ |
| 3461 | for (i = 0; i < dev_priv->num_shared_dpll; i++) { |
| 3462 | pll = &dev_priv->shared_dplls[i]; |
| 3463 | if (pll->refcount == 0) { |
| 3464 | DRM_DEBUG_KMS("CRTC:%d allocated %s\n", |
| 3465 | crtc->base.base.id, pll->name); |
| 3466 | goto found; |
| 3467 | } |
| 3468 | } |
| 3469 | |
| 3470 | return NULL; |
| 3471 | |
| 3472 | found: |
| 3473 | crtc->config.shared_dpll = i; |
| 3474 | DRM_DEBUG_DRIVER("using %s for pipe %c\n", pll->name, |
| 3475 | pipe_name(crtc->pipe)); |
| 3476 | |
| 3477 | if (pll->active == 0) { |
| 3478 | memcpy(&pll->hw_state, &crtc->config.dpll_hw_state, |
| 3479 | sizeof(pll->hw_state)); |
| 3480 | |
| 3481 | DRM_DEBUG_DRIVER("setting up %s\n", pll->name); |
| 3482 | WARN_ON(pll->on); |
| 3483 | assert_shared_dpll_disabled(dev_priv, pll); |
| 3484 | |
| 3485 | pll->mode_set(dev_priv, pll); |
| 3486 | } |
| 3487 | pll->refcount++; |
| 3488 | |
| 3489 | return pll; |
| 3490 | } |
| 3491 | |
| 3492 | static void cpt_verify_modeset(struct drm_device *dev, int pipe) |
| 3493 | { |
| 3494 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 3495 | int dslreg = PIPEDSL(pipe); |
| 3496 | u32 temp; |
| 3497 | |
| 3498 | temp = I915_READ(dslreg); |
| 3499 | udelay(500); |
| 3500 | if (wait_for(I915_READ(dslreg) != temp, 5)) { |
| 3501 | if (wait_for(I915_READ(dslreg) != temp, 5)) |
| 3502 | DRM_ERROR("mode set failed: pipe %c stuck\n", pipe_name(pipe)); |
| 3503 | } |
| 3504 | } |
| 3505 | |
| 3506 | static void ironlake_pfit_enable(struct intel_crtc *crtc) |
| 3507 | { |
| 3508 | struct drm_device *dev = crtc->base.dev; |
| 3509 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 3510 | int pipe = crtc->pipe; |
| 3511 | |
| 3512 | if (crtc->config.pch_pfit.enabled) { |
| 3513 | /* Force use of hard-coded filter coefficients |
| 3514 | * as some pre-programmed values are broken, |
| 3515 | * e.g. x201. |
| 3516 | */ |
| 3517 | if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev)) |
| 3518 | I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3 | |
| 3519 | PF_PIPE_SEL_IVB(pipe)); |
| 3520 | else |
| 3521 | I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3); |
| 3522 | I915_WRITE(PF_WIN_POS(pipe), crtc->config.pch_pfit.pos); |
| 3523 | I915_WRITE(PF_WIN_SZ(pipe), crtc->config.pch_pfit.size); |
| 3524 | } |
| 3525 | } |
| 3526 | |
| 3527 | static void intel_enable_planes(struct drm_crtc *crtc) |
| 3528 | { |
| 3529 | struct drm_device *dev = crtc->dev; |
| 3530 | enum pipe pipe = to_intel_crtc(crtc)->pipe; |
| 3531 | struct intel_plane *intel_plane; |
| 3532 | |
| 3533 | list_for_each_entry(intel_plane, &dev->mode_config.plane_list, base.head) |
| 3534 | if (intel_plane->pipe == pipe) |
| 3535 | intel_plane_restore(&intel_plane->base); |
| 3536 | } |
| 3537 | |
| 3538 | static void intel_disable_planes(struct drm_crtc *crtc) |
| 3539 | { |
| 3540 | struct drm_device *dev = crtc->dev; |
| 3541 | enum pipe pipe = to_intel_crtc(crtc)->pipe; |
| 3542 | struct intel_plane *intel_plane; |
| 3543 | |
| 3544 | list_for_each_entry(intel_plane, &dev->mode_config.plane_list, base.head) |
| 3545 | if (intel_plane->pipe == pipe) |
| 3546 | intel_plane_disable(&intel_plane->base); |
| 3547 | } |
| 3548 | |
| 3549 | void hsw_enable_ips(struct intel_crtc *crtc) |
| 3550 | { |
| 3551 | struct drm_i915_private *dev_priv = crtc->base.dev->dev_private; |
| 3552 | |
| 3553 | if (!crtc->config.ips_enabled) |
| 3554 | return; |
| 3555 | |
| 3556 | /* We can only enable IPS after we enable a plane and wait for a vblank. |
| 3557 | * We guarantee that the plane is enabled by calling intel_enable_ips |
| 3558 | * only after intel_enable_plane. And intel_enable_plane already waits |
| 3559 | * for a vblank, so all we need to do here is to enable the IPS bit. */ |
| 3560 | assert_plane_enabled(dev_priv, crtc->plane); |
| 3561 | if (IS_BROADWELL(crtc->base.dev)) { |
| 3562 | mutex_lock(&dev_priv->rps.hw_lock); |
| 3563 | WARN_ON(sandybridge_pcode_write(dev_priv, DISPLAY_IPS_CONTROL, 0xc0000000)); |
| 3564 | mutex_unlock(&dev_priv->rps.hw_lock); |
| 3565 | /* Quoting Art Runyan: "its not safe to expect any particular |
| 3566 | * value in IPS_CTL bit 31 after enabling IPS through the |
| 3567 | * mailbox." Moreover, the mailbox may return a bogus state, |
| 3568 | * so we need to just enable it and continue on. |
| 3569 | */ |
| 3570 | } else { |
| 3571 | I915_WRITE(IPS_CTL, IPS_ENABLE); |
| 3572 | /* The bit only becomes 1 in the next vblank, so this wait here |
| 3573 | * is essentially intel_wait_for_vblank. If we don't have this |
| 3574 | * and don't wait for vblanks until the end of crtc_enable, then |
| 3575 | * the HW state readout code will complain that the expected |
| 3576 | * IPS_CTL value is not the one we read. */ |
| 3577 | if (wait_for(I915_READ_NOTRACE(IPS_CTL) & IPS_ENABLE, 50)) |
| 3578 | DRM_ERROR("Timed out waiting for IPS enable\n"); |
| 3579 | } |
| 3580 | } |
| 3581 | |
| 3582 | void hsw_disable_ips(struct intel_crtc *crtc) |
| 3583 | { |
| 3584 | struct drm_device *dev = crtc->base.dev; |
| 3585 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 3586 | |
| 3587 | if (!crtc->config.ips_enabled) |
| 3588 | return; |
| 3589 | |
| 3590 | assert_plane_enabled(dev_priv, crtc->plane); |
| 3591 | if (IS_BROADWELL(crtc->base.dev)) { |
| 3592 | mutex_lock(&dev_priv->rps.hw_lock); |
| 3593 | WARN_ON(sandybridge_pcode_write(dev_priv, DISPLAY_IPS_CONTROL, 0)); |
| 3594 | mutex_unlock(&dev_priv->rps.hw_lock); |
| 3595 | } else { |
| 3596 | I915_WRITE(IPS_CTL, 0); |
| 3597 | POSTING_READ(IPS_CTL); |
| 3598 | } |
| 3599 | |
| 3600 | /* We need to wait for a vblank before we can disable the plane. */ |
| 3601 | intel_wait_for_vblank(dev, crtc->pipe); |
| 3602 | } |
| 3603 | |
| 3604 | /** Loads the palette/gamma unit for the CRTC with the prepared values */ |
| 3605 | static void intel_crtc_load_lut(struct drm_crtc *crtc) |
| 3606 | { |
| 3607 | struct drm_device *dev = crtc->dev; |
| 3608 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 3609 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 3610 | enum pipe pipe = intel_crtc->pipe; |
| 3611 | int palreg = PALETTE(pipe); |
| 3612 | int i; |
| 3613 | bool reenable_ips = false; |
| 3614 | |
| 3615 | /* The clocks have to be on to load the palette. */ |
| 3616 | if (!crtc->enabled || !intel_crtc->active) |
| 3617 | return; |
| 3618 | |
| 3619 | if (!HAS_PCH_SPLIT(dev_priv->dev)) { |
| 3620 | if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DSI)) |
| 3621 | assert_dsi_pll_enabled(dev_priv); |
| 3622 | else |
| 3623 | assert_pll_enabled(dev_priv, pipe); |
| 3624 | } |
| 3625 | |
| 3626 | /* use legacy palette for Ironlake */ |
| 3627 | if (HAS_PCH_SPLIT(dev)) |
| 3628 | palreg = LGC_PALETTE(pipe); |
| 3629 | |
| 3630 | /* Workaround : Do not read or write the pipe palette/gamma data while |
| 3631 | * GAMMA_MODE is configured for split gamma and IPS_CTL has IPS enabled. |
| 3632 | */ |
| 3633 | if (IS_HASWELL(dev) && intel_crtc->config.ips_enabled && |
| 3634 | ((I915_READ(GAMMA_MODE(pipe)) & GAMMA_MODE_MODE_MASK) == |
| 3635 | GAMMA_MODE_MODE_SPLIT)) { |
| 3636 | hsw_disable_ips(intel_crtc); |
| 3637 | reenable_ips = true; |
| 3638 | } |
| 3639 | |
| 3640 | for (i = 0; i < 256; i++) { |
| 3641 | I915_WRITE(palreg + 4 * i, |
| 3642 | (intel_crtc->lut_r[i] << 16) | |
| 3643 | (intel_crtc->lut_g[i] << 8) | |
| 3644 | intel_crtc->lut_b[i]); |
| 3645 | } |
| 3646 | |
| 3647 | if (reenable_ips) |
| 3648 | hsw_enable_ips(intel_crtc); |
| 3649 | } |
| 3650 | |
| 3651 | static void ironlake_crtc_enable(struct drm_crtc *crtc) |
| 3652 | { |
| 3653 | struct drm_device *dev = crtc->dev; |
| 3654 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 3655 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 3656 | struct intel_encoder *encoder; |
| 3657 | int pipe = intel_crtc->pipe; |
| 3658 | int plane = intel_crtc->plane; |
| 3659 | |
| 3660 | WARN_ON(!crtc->enabled); |
| 3661 | |
| 3662 | if (intel_crtc->active) |
| 3663 | return; |
| 3664 | |
| 3665 | intel_crtc->active = true; |
| 3666 | |
| 3667 | intel_set_cpu_fifo_underrun_reporting(dev, pipe, true); |
| 3668 | intel_set_pch_fifo_underrun_reporting(dev, pipe, true); |
| 3669 | |
| 3670 | for_each_encoder_on_crtc(dev, crtc, encoder) |
| 3671 | if (encoder->pre_enable) |
| 3672 | encoder->pre_enable(encoder); |
| 3673 | |
| 3674 | if (intel_crtc->config.has_pch_encoder) { |
| 3675 | /* Note: FDI PLL enabling _must_ be done before we enable the |
| 3676 | * cpu pipes, hence this is separate from all the other fdi/pch |
| 3677 | * enabling. */ |
| 3678 | ironlake_fdi_pll_enable(intel_crtc); |
| 3679 | } else { |
| 3680 | assert_fdi_tx_disabled(dev_priv, pipe); |
| 3681 | assert_fdi_rx_disabled(dev_priv, pipe); |
| 3682 | } |
| 3683 | |
| 3684 | ironlake_pfit_enable(intel_crtc); |
| 3685 | |
| 3686 | /* |
| 3687 | * On ILK+ LUT must be loaded before the pipe is running but with |
| 3688 | * clocks enabled |
| 3689 | */ |
| 3690 | intel_crtc_load_lut(crtc); |
| 3691 | |
| 3692 | intel_update_watermarks(crtc); |
| 3693 | intel_enable_pipe(intel_crtc); |
| 3694 | intel_enable_primary_plane(dev_priv, plane, pipe); |
| 3695 | intel_enable_planes(crtc); |
| 3696 | intel_crtc_update_cursor(crtc, true); |
| 3697 | |
| 3698 | if (intel_crtc->config.has_pch_encoder) |
| 3699 | ironlake_pch_enable(crtc); |
| 3700 | |
| 3701 | mutex_lock(&dev->struct_mutex); |
| 3702 | intel_update_fbc(dev); |
| 3703 | mutex_unlock(&dev->struct_mutex); |
| 3704 | |
| 3705 | for_each_encoder_on_crtc(dev, crtc, encoder) |
| 3706 | encoder->enable(encoder); |
| 3707 | |
| 3708 | if (HAS_PCH_CPT(dev)) |
| 3709 | cpt_verify_modeset(dev, intel_crtc->pipe); |
| 3710 | |
| 3711 | /* |
| 3712 | * There seems to be a race in PCH platform hw (at least on some |
| 3713 | * outputs) where an enabled pipe still completes any pageflip right |
| 3714 | * away (as if the pipe is off) instead of waiting for vblank. As soon |
| 3715 | * as the first vblank happend, everything works as expected. Hence just |
| 3716 | * wait for one vblank before returning to avoid strange things |
| 3717 | * happening. |
| 3718 | */ |
| 3719 | intel_wait_for_vblank(dev, intel_crtc->pipe); |
| 3720 | } |
| 3721 | |
| 3722 | /* IPS only exists on ULT machines and is tied to pipe A. */ |
| 3723 | static bool hsw_crtc_supports_ips(struct intel_crtc *crtc) |
| 3724 | { |
| 3725 | return HAS_IPS(crtc->base.dev) && crtc->pipe == PIPE_A; |
| 3726 | } |
| 3727 | |
| 3728 | static void haswell_crtc_enable_planes(struct drm_crtc *crtc) |
| 3729 | { |
| 3730 | struct drm_device *dev = crtc->dev; |
| 3731 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 3732 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 3733 | int pipe = intel_crtc->pipe; |
| 3734 | int plane = intel_crtc->plane; |
| 3735 | |
| 3736 | intel_enable_primary_plane(dev_priv, plane, pipe); |
| 3737 | intel_enable_planes(crtc); |
| 3738 | intel_crtc_update_cursor(crtc, true); |
| 3739 | |
| 3740 | hsw_enable_ips(intel_crtc); |
| 3741 | |
| 3742 | mutex_lock(&dev->struct_mutex); |
| 3743 | intel_update_fbc(dev); |
| 3744 | mutex_unlock(&dev->struct_mutex); |
| 3745 | } |
| 3746 | |
| 3747 | static void haswell_crtc_disable_planes(struct drm_crtc *crtc) |
| 3748 | { |
| 3749 | struct drm_device *dev = crtc->dev; |
| 3750 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 3751 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 3752 | int pipe = intel_crtc->pipe; |
| 3753 | int plane = intel_crtc->plane; |
| 3754 | |
| 3755 | intel_crtc_wait_for_pending_flips(crtc); |
| 3756 | drm_vblank_off(dev, pipe); |
| 3757 | |
| 3758 | /* FBC must be disabled before disabling the plane on HSW. */ |
| 3759 | if (dev_priv->fbc.plane == plane) |
| 3760 | intel_disable_fbc(dev); |
| 3761 | |
| 3762 | hsw_disable_ips(intel_crtc); |
| 3763 | |
| 3764 | intel_crtc_update_cursor(crtc, false); |
| 3765 | intel_disable_planes(crtc); |
| 3766 | intel_disable_primary_plane(dev_priv, plane, pipe); |
| 3767 | } |
| 3768 | |
| 3769 | /* |
| 3770 | * This implements the workaround described in the "notes" section of the mode |
| 3771 | * set sequence documentation. When going from no pipes or single pipe to |
| 3772 | * multiple pipes, and planes are enabled after the pipe, we need to wait at |
| 3773 | * least 2 vblanks on the first pipe before enabling planes on the second pipe. |
| 3774 | */ |
| 3775 | static void haswell_mode_set_planes_workaround(struct intel_crtc *crtc) |
| 3776 | { |
| 3777 | struct drm_device *dev = crtc->base.dev; |
| 3778 | struct intel_crtc *crtc_it, *other_active_crtc = NULL; |
| 3779 | |
| 3780 | /* We want to get the other_active_crtc only if there's only 1 other |
| 3781 | * active crtc. */ |
| 3782 | list_for_each_entry(crtc_it, &dev->mode_config.crtc_list, base.head) { |
| 3783 | if (!crtc_it->active || crtc_it == crtc) |
| 3784 | continue; |
| 3785 | |
| 3786 | if (other_active_crtc) |
| 3787 | return; |
| 3788 | |
| 3789 | other_active_crtc = crtc_it; |
| 3790 | } |
| 3791 | if (!other_active_crtc) |
| 3792 | return; |
| 3793 | |
| 3794 | intel_wait_for_vblank(dev, other_active_crtc->pipe); |
| 3795 | intel_wait_for_vblank(dev, other_active_crtc->pipe); |
| 3796 | } |
| 3797 | |
| 3798 | static void haswell_crtc_enable(struct drm_crtc *crtc) |
| 3799 | { |
| 3800 | struct drm_device *dev = crtc->dev; |
| 3801 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 3802 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 3803 | struct intel_encoder *encoder; |
| 3804 | int pipe = intel_crtc->pipe; |
| 3805 | |
| 3806 | WARN_ON(!crtc->enabled); |
| 3807 | |
| 3808 | if (intel_crtc->active) |
| 3809 | return; |
| 3810 | |
| 3811 | intel_crtc->active = true; |
| 3812 | |
| 3813 | intel_set_cpu_fifo_underrun_reporting(dev, pipe, true); |
| 3814 | if (intel_crtc->config.has_pch_encoder) |
| 3815 | intel_set_pch_fifo_underrun_reporting(dev, TRANSCODER_A, true); |
| 3816 | |
| 3817 | if (intel_crtc->config.has_pch_encoder) |
| 3818 | dev_priv->display.fdi_link_train(crtc); |
| 3819 | |
| 3820 | for_each_encoder_on_crtc(dev, crtc, encoder) |
| 3821 | if (encoder->pre_enable) |
| 3822 | encoder->pre_enable(encoder); |
| 3823 | |
| 3824 | intel_ddi_enable_pipe_clock(intel_crtc); |
| 3825 | |
| 3826 | ironlake_pfit_enable(intel_crtc); |
| 3827 | |
| 3828 | /* |
| 3829 | * On ILK+ LUT must be loaded before the pipe is running but with |
| 3830 | * clocks enabled |
| 3831 | */ |
| 3832 | intel_crtc_load_lut(crtc); |
| 3833 | |
| 3834 | intel_ddi_set_pipe_settings(crtc); |
| 3835 | intel_ddi_enable_transcoder_func(crtc); |
| 3836 | |
| 3837 | intel_update_watermarks(crtc); |
| 3838 | intel_enable_pipe(intel_crtc); |
| 3839 | |
| 3840 | if (intel_crtc->config.has_pch_encoder) |
| 3841 | lpt_pch_enable(crtc); |
| 3842 | |
| 3843 | for_each_encoder_on_crtc(dev, crtc, encoder) { |
| 3844 | encoder->enable(encoder); |
| 3845 | intel_opregion_notify_encoder(encoder, true); |
| 3846 | } |
| 3847 | |
| 3848 | /* If we change the relative order between pipe/planes enabling, we need |
| 3849 | * to change the workaround. */ |
| 3850 | haswell_mode_set_planes_workaround(intel_crtc); |
| 3851 | haswell_crtc_enable_planes(crtc); |
| 3852 | } |
| 3853 | |
| 3854 | static void ironlake_pfit_disable(struct intel_crtc *crtc) |
| 3855 | { |
| 3856 | struct drm_device *dev = crtc->base.dev; |
| 3857 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 3858 | int pipe = crtc->pipe; |
| 3859 | |
| 3860 | /* To avoid upsetting the power well on haswell only disable the pfit if |
| 3861 | * it's in use. The hw state code will make sure we get this right. */ |
| 3862 | if (crtc->config.pch_pfit.enabled) { |
| 3863 | I915_WRITE(PF_CTL(pipe), 0); |
| 3864 | I915_WRITE(PF_WIN_POS(pipe), 0); |
| 3865 | I915_WRITE(PF_WIN_SZ(pipe), 0); |
| 3866 | } |
| 3867 | } |
| 3868 | |
| 3869 | static void ironlake_crtc_disable(struct drm_crtc *crtc) |
| 3870 | { |
| 3871 | struct drm_device *dev = crtc->dev; |
| 3872 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 3873 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 3874 | struct intel_encoder *encoder; |
| 3875 | int pipe = intel_crtc->pipe; |
| 3876 | int plane = intel_crtc->plane; |
| 3877 | u32 reg, temp; |
| 3878 | |
| 3879 | |
| 3880 | if (!intel_crtc->active) |
| 3881 | return; |
| 3882 | |
| 3883 | for_each_encoder_on_crtc(dev, crtc, encoder) |
| 3884 | encoder->disable(encoder); |
| 3885 | |
| 3886 | intel_crtc_wait_for_pending_flips(crtc); |
| 3887 | drm_vblank_off(dev, pipe); |
| 3888 | |
| 3889 | if (dev_priv->fbc.plane == plane) |
| 3890 | intel_disable_fbc(dev); |
| 3891 | |
| 3892 | intel_crtc_update_cursor(crtc, false); |
| 3893 | intel_disable_planes(crtc); |
| 3894 | intel_disable_primary_plane(dev_priv, plane, pipe); |
| 3895 | |
| 3896 | if (intel_crtc->config.has_pch_encoder) |
| 3897 | intel_set_pch_fifo_underrun_reporting(dev, pipe, false); |
| 3898 | |
| 3899 | intel_disable_pipe(dev_priv, pipe); |
| 3900 | |
| 3901 | ironlake_pfit_disable(intel_crtc); |
| 3902 | |
| 3903 | for_each_encoder_on_crtc(dev, crtc, encoder) |
| 3904 | if (encoder->post_disable) |
| 3905 | encoder->post_disable(encoder); |
| 3906 | |
| 3907 | if (intel_crtc->config.has_pch_encoder) { |
| 3908 | ironlake_fdi_disable(crtc); |
| 3909 | |
| 3910 | ironlake_disable_pch_transcoder(dev_priv, pipe); |
| 3911 | intel_set_pch_fifo_underrun_reporting(dev, pipe, true); |
| 3912 | |
| 3913 | if (HAS_PCH_CPT(dev)) { |
| 3914 | /* disable TRANS_DP_CTL */ |
| 3915 | reg = TRANS_DP_CTL(pipe); |
| 3916 | temp = I915_READ(reg); |
| 3917 | temp &= ~(TRANS_DP_OUTPUT_ENABLE | |
| 3918 | TRANS_DP_PORT_SEL_MASK); |
| 3919 | temp |= TRANS_DP_PORT_SEL_NONE; |
| 3920 | I915_WRITE(reg, temp); |
| 3921 | |
| 3922 | /* disable DPLL_SEL */ |
| 3923 | temp = I915_READ(PCH_DPLL_SEL); |
| 3924 | temp &= ~(TRANS_DPLL_ENABLE(pipe) | TRANS_DPLLB_SEL(pipe)); |
| 3925 | I915_WRITE(PCH_DPLL_SEL, temp); |
| 3926 | } |
| 3927 | |
| 3928 | /* disable PCH DPLL */ |
| 3929 | intel_disable_shared_dpll(intel_crtc); |
| 3930 | |
| 3931 | ironlake_fdi_pll_disable(intel_crtc); |
| 3932 | } |
| 3933 | |
| 3934 | intel_crtc->active = false; |
| 3935 | intel_update_watermarks(crtc); |
| 3936 | |
| 3937 | mutex_lock(&dev->struct_mutex); |
| 3938 | intel_update_fbc(dev); |
| 3939 | mutex_unlock(&dev->struct_mutex); |
| 3940 | } |
| 3941 | |
| 3942 | static void haswell_crtc_disable(struct drm_crtc *crtc) |
| 3943 | { |
| 3944 | struct drm_device *dev = crtc->dev; |
| 3945 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 3946 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 3947 | struct intel_encoder *encoder; |
| 3948 | int pipe = intel_crtc->pipe; |
| 3949 | enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder; |
| 3950 | |
| 3951 | if (!intel_crtc->active) |
| 3952 | return; |
| 3953 | |
| 3954 | haswell_crtc_disable_planes(crtc); |
| 3955 | |
| 3956 | for_each_encoder_on_crtc(dev, crtc, encoder) { |
| 3957 | intel_opregion_notify_encoder(encoder, false); |
| 3958 | encoder->disable(encoder); |
| 3959 | } |
| 3960 | |
| 3961 | if (intel_crtc->config.has_pch_encoder) |
| 3962 | intel_set_pch_fifo_underrun_reporting(dev, TRANSCODER_A, false); |
| 3963 | intel_disable_pipe(dev_priv, pipe); |
| 3964 | |
| 3965 | intel_ddi_disable_transcoder_func(dev_priv, cpu_transcoder); |
| 3966 | |
| 3967 | ironlake_pfit_disable(intel_crtc); |
| 3968 | |
| 3969 | intel_ddi_disable_pipe_clock(intel_crtc); |
| 3970 | |
| 3971 | for_each_encoder_on_crtc(dev, crtc, encoder) |
| 3972 | if (encoder->post_disable) |
| 3973 | encoder->post_disable(encoder); |
| 3974 | |
| 3975 | if (intel_crtc->config.has_pch_encoder) { |
| 3976 | lpt_disable_pch_transcoder(dev_priv); |
| 3977 | intel_set_pch_fifo_underrun_reporting(dev, TRANSCODER_A, true); |
| 3978 | intel_ddi_fdi_disable(crtc); |
| 3979 | } |
| 3980 | |
| 3981 | intel_crtc->active = false; |
| 3982 | intel_update_watermarks(crtc); |
| 3983 | |
| 3984 | mutex_lock(&dev->struct_mutex); |
| 3985 | intel_update_fbc(dev); |
| 3986 | mutex_unlock(&dev->struct_mutex); |
| 3987 | } |
| 3988 | |
| 3989 | static void ironlake_crtc_off(struct drm_crtc *crtc) |
| 3990 | { |
| 3991 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 3992 | intel_put_shared_dpll(intel_crtc); |
| 3993 | } |
| 3994 | |
| 3995 | static void haswell_crtc_off(struct drm_crtc *crtc) |
| 3996 | { |
| 3997 | intel_ddi_put_crtc_pll(crtc); |
| 3998 | } |
| 3999 | |
| 4000 | static void intel_crtc_dpms_overlay(struct intel_crtc *intel_crtc, bool enable) |
| 4001 | { |
| 4002 | if (!enable && intel_crtc->overlay) { |
| 4003 | struct drm_device *dev = intel_crtc->base.dev; |
| 4004 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 4005 | |
| 4006 | mutex_lock(&dev->struct_mutex); |
| 4007 | dev_priv->mm.interruptible = false; |
| 4008 | (void) intel_overlay_switch_off(intel_crtc->overlay); |
| 4009 | dev_priv->mm.interruptible = true; |
| 4010 | mutex_unlock(&dev->struct_mutex); |
| 4011 | } |
| 4012 | |
| 4013 | /* Let userspace switch the overlay on again. In most cases userspace |
| 4014 | * has to recompute where to put it anyway. |
| 4015 | */ |
| 4016 | } |
| 4017 | |
| 4018 | /** |
| 4019 | * i9xx_fixup_plane - ugly workaround for G45 to fire up the hardware |
| 4020 | * cursor plane briefly if not already running after enabling the display |
| 4021 | * plane. |
| 4022 | * This workaround avoids occasional blank screens when self refresh is |
| 4023 | * enabled. |
| 4024 | */ |
| 4025 | static void |
| 4026 | g4x_fixup_plane(struct drm_i915_private *dev_priv, enum pipe pipe) |
| 4027 | { |
| 4028 | u32 cntl = I915_READ(CURCNTR(pipe)); |
| 4029 | |
| 4030 | if ((cntl & CURSOR_MODE) == 0) { |
| 4031 | u32 fw_bcl_self = I915_READ(FW_BLC_SELF); |
| 4032 | |
| 4033 | I915_WRITE(FW_BLC_SELF, fw_bcl_self & ~FW_BLC_SELF_EN); |
| 4034 | I915_WRITE(CURCNTR(pipe), CURSOR_MODE_64_ARGB_AX); |
| 4035 | intel_wait_for_vblank(dev_priv->dev, pipe); |
| 4036 | I915_WRITE(CURCNTR(pipe), cntl); |
| 4037 | I915_WRITE(CURBASE(pipe), I915_READ(CURBASE(pipe))); |
| 4038 | I915_WRITE(FW_BLC_SELF, fw_bcl_self); |
| 4039 | } |
| 4040 | } |
| 4041 | |
| 4042 | static void i9xx_pfit_enable(struct intel_crtc *crtc) |
| 4043 | { |
| 4044 | struct drm_device *dev = crtc->base.dev; |
| 4045 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 4046 | struct intel_crtc_config *pipe_config = &crtc->config; |
| 4047 | |
| 4048 | if (!crtc->config.gmch_pfit.control) |
| 4049 | return; |
| 4050 | |
| 4051 | /* |
| 4052 | * The panel fitter should only be adjusted whilst the pipe is disabled, |
| 4053 | * according to register description and PRM. |
| 4054 | */ |
| 4055 | WARN_ON(I915_READ(PFIT_CONTROL) & PFIT_ENABLE); |
| 4056 | assert_pipe_disabled(dev_priv, crtc->pipe); |
| 4057 | |
| 4058 | I915_WRITE(PFIT_PGM_RATIOS, pipe_config->gmch_pfit.pgm_ratios); |
| 4059 | I915_WRITE(PFIT_CONTROL, pipe_config->gmch_pfit.control); |
| 4060 | |
| 4061 | /* Border color in case we don't scale up to the full screen. Black by |
| 4062 | * default, change to something else for debugging. */ |
| 4063 | I915_WRITE(BCLRPAT(crtc->pipe), 0); |
| 4064 | } |
| 4065 | |
| 4066 | #define for_each_power_domain(domain, mask) \ |
| 4067 | for ((domain) = 0; (domain) < POWER_DOMAIN_NUM; (domain)++) \ |
| 4068 | if ((1 << (domain)) & (mask)) |
| 4069 | |
| 4070 | enum intel_display_power_domain |
| 4071 | intel_display_port_power_domain(struct intel_encoder *intel_encoder) |
| 4072 | { |
| 4073 | struct drm_device *dev = intel_encoder->base.dev; |
| 4074 | struct intel_digital_port *intel_dig_port; |
| 4075 | |
| 4076 | switch (intel_encoder->type) { |
| 4077 | case INTEL_OUTPUT_UNKNOWN: |
| 4078 | /* Only DDI platforms should ever use this output type */ |
| 4079 | WARN_ON_ONCE(!HAS_DDI(dev)); |
| 4080 | case INTEL_OUTPUT_DISPLAYPORT: |
| 4081 | case INTEL_OUTPUT_HDMI: |
| 4082 | case INTEL_OUTPUT_EDP: |
| 4083 | intel_dig_port = enc_to_dig_port(&intel_encoder->base); |
| 4084 | switch (intel_dig_port->port) { |
| 4085 | case PORT_A: |
| 4086 | return POWER_DOMAIN_PORT_DDI_A_4_LANES; |
| 4087 | case PORT_B: |
| 4088 | return POWER_DOMAIN_PORT_DDI_B_4_LANES; |
| 4089 | case PORT_C: |
| 4090 | return POWER_DOMAIN_PORT_DDI_C_4_LANES; |
| 4091 | case PORT_D: |
| 4092 | return POWER_DOMAIN_PORT_DDI_D_4_LANES; |
| 4093 | default: |
| 4094 | WARN_ON_ONCE(1); |
| 4095 | return POWER_DOMAIN_PORT_OTHER; |
| 4096 | } |
| 4097 | case INTEL_OUTPUT_ANALOG: |
| 4098 | return POWER_DOMAIN_PORT_CRT; |
| 4099 | case INTEL_OUTPUT_DSI: |
| 4100 | return POWER_DOMAIN_PORT_DSI; |
| 4101 | default: |
| 4102 | return POWER_DOMAIN_PORT_OTHER; |
| 4103 | } |
| 4104 | } |
| 4105 | |
| 4106 | static unsigned long get_crtc_power_domains(struct drm_crtc *crtc) |
| 4107 | { |
| 4108 | struct drm_device *dev = crtc->dev; |
| 4109 | struct intel_encoder *intel_encoder; |
| 4110 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 4111 | enum pipe pipe = intel_crtc->pipe; |
| 4112 | bool pfit_enabled = intel_crtc->config.pch_pfit.enabled; |
| 4113 | unsigned long mask; |
| 4114 | enum transcoder transcoder; |
| 4115 | |
| 4116 | transcoder = intel_pipe_to_cpu_transcoder(dev->dev_private, pipe); |
| 4117 | |
| 4118 | mask = BIT(POWER_DOMAIN_PIPE(pipe)); |
| 4119 | mask |= BIT(POWER_DOMAIN_TRANSCODER(transcoder)); |
| 4120 | if (pfit_enabled) |
| 4121 | mask |= BIT(POWER_DOMAIN_PIPE_PANEL_FITTER(pipe)); |
| 4122 | |
| 4123 | for_each_encoder_on_crtc(dev, crtc, intel_encoder) |
| 4124 | mask |= BIT(intel_display_port_power_domain(intel_encoder)); |
| 4125 | |
| 4126 | return mask; |
| 4127 | } |
| 4128 | |
| 4129 | void intel_display_set_init_power(struct drm_i915_private *dev_priv, |
| 4130 | bool enable) |
| 4131 | { |
| 4132 | if (dev_priv->power_domains.init_power_on == enable) |
| 4133 | return; |
| 4134 | |
| 4135 | if (enable) |
| 4136 | intel_display_power_get(dev_priv, POWER_DOMAIN_INIT); |
| 4137 | else |
| 4138 | intel_display_power_put(dev_priv, POWER_DOMAIN_INIT); |
| 4139 | |
| 4140 | dev_priv->power_domains.init_power_on = enable; |
| 4141 | } |
| 4142 | |
| 4143 | static void modeset_update_crtc_power_domains(struct drm_device *dev) |
| 4144 | { |
| 4145 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 4146 | unsigned long pipe_domains[I915_MAX_PIPES] = { 0, }; |
| 4147 | struct intel_crtc *crtc; |
| 4148 | |
| 4149 | /* |
| 4150 | * First get all needed power domains, then put all unneeded, to avoid |
| 4151 | * any unnecessary toggling of the power wells. |
| 4152 | */ |
| 4153 | list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head) { |
| 4154 | enum intel_display_power_domain domain; |
| 4155 | |
| 4156 | if (!crtc->base.enabled) |
| 4157 | continue; |
| 4158 | |
| 4159 | pipe_domains[crtc->pipe] = get_crtc_power_domains(&crtc->base); |
| 4160 | |
| 4161 | for_each_power_domain(domain, pipe_domains[crtc->pipe]) |
| 4162 | intel_display_power_get(dev_priv, domain); |
| 4163 | } |
| 4164 | |
| 4165 | list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head) { |
| 4166 | enum intel_display_power_domain domain; |
| 4167 | |
| 4168 | for_each_power_domain(domain, crtc->enabled_power_domains) |
| 4169 | intel_display_power_put(dev_priv, domain); |
| 4170 | |
| 4171 | crtc->enabled_power_domains = pipe_domains[crtc->pipe]; |
| 4172 | } |
| 4173 | |
| 4174 | intel_display_set_init_power(dev_priv, false); |
| 4175 | } |
| 4176 | |
| 4177 | int valleyview_get_vco(struct drm_i915_private *dev_priv) |
| 4178 | { |
| 4179 | int hpll_freq, vco_freq[] = { 800, 1600, 2000, 2400 }; |
| 4180 | |
| 4181 | /* Obtain SKU information */ |
| 4182 | mutex_lock(&dev_priv->dpio_lock); |
| 4183 | hpll_freq = vlv_cck_read(dev_priv, CCK_FUSE_REG) & |
| 4184 | CCK_FUSE_HPLL_FREQ_MASK; |
| 4185 | mutex_unlock(&dev_priv->dpio_lock); |
| 4186 | |
| 4187 | return vco_freq[hpll_freq]; |
| 4188 | } |
| 4189 | |
| 4190 | /* Adjust CDclk dividers to allow high res or save power if possible */ |
| 4191 | static void valleyview_set_cdclk(struct drm_device *dev, int cdclk) |
| 4192 | { |
| 4193 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 4194 | u32 val, cmd; |
| 4195 | |
| 4196 | if (cdclk >= 320) /* jump to highest voltage for 400MHz too */ |
| 4197 | cmd = 2; |
| 4198 | else if (cdclk == 266) |
| 4199 | cmd = 1; |
| 4200 | else |
| 4201 | cmd = 0; |
| 4202 | |
| 4203 | mutex_lock(&dev_priv->rps.hw_lock); |
| 4204 | val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); |
| 4205 | val &= ~DSPFREQGUAR_MASK; |
| 4206 | val |= (cmd << DSPFREQGUAR_SHIFT); |
| 4207 | vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val); |
| 4208 | if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & |
| 4209 | DSPFREQSTAT_MASK) == (cmd << DSPFREQSTAT_SHIFT), |
| 4210 | 50)) { |
| 4211 | DRM_ERROR("timed out waiting for CDclk change\n"); |
| 4212 | } |
| 4213 | mutex_unlock(&dev_priv->rps.hw_lock); |
| 4214 | |
| 4215 | if (cdclk == 400) { |
| 4216 | u32 divider, vco; |
| 4217 | |
| 4218 | vco = valleyview_get_vco(dev_priv); |
| 4219 | divider = ((vco << 1) / cdclk) - 1; |
| 4220 | |
| 4221 | mutex_lock(&dev_priv->dpio_lock); |
| 4222 | /* adjust cdclk divider */ |
| 4223 | val = vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL); |
| 4224 | val &= ~0xf; |
| 4225 | val |= divider; |
| 4226 | vlv_cck_write(dev_priv, CCK_DISPLAY_CLOCK_CONTROL, val); |
| 4227 | mutex_unlock(&dev_priv->dpio_lock); |
| 4228 | } |
| 4229 | |
| 4230 | mutex_lock(&dev_priv->dpio_lock); |
| 4231 | /* adjust self-refresh exit latency value */ |
| 4232 | val = vlv_bunit_read(dev_priv, BUNIT_REG_BISOC); |
| 4233 | val &= ~0x7f; |
| 4234 | |
| 4235 | /* |
| 4236 | * For high bandwidth configs, we set a higher latency in the bunit |
| 4237 | * so that the core display fetch happens in time to avoid underruns. |
| 4238 | */ |
| 4239 | if (cdclk == 400) |
| 4240 | val |= 4500 / 250; /* 4.5 usec */ |
| 4241 | else |
| 4242 | val |= 3000 / 250; /* 3.0 usec */ |
| 4243 | vlv_bunit_write(dev_priv, BUNIT_REG_BISOC, val); |
| 4244 | mutex_unlock(&dev_priv->dpio_lock); |
| 4245 | |
| 4246 | /* Since we changed the CDclk, we need to update the GMBUSFREQ too */ |
| 4247 | intel_i2c_reset(dev); |
| 4248 | } |
| 4249 | |
| 4250 | static int valleyview_cur_cdclk(struct drm_i915_private *dev_priv) |
| 4251 | { |
| 4252 | int cur_cdclk, vco; |
| 4253 | int divider; |
| 4254 | |
| 4255 | vco = valleyview_get_vco(dev_priv); |
| 4256 | |
| 4257 | mutex_lock(&dev_priv->dpio_lock); |
| 4258 | divider = vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL); |
| 4259 | mutex_unlock(&dev_priv->dpio_lock); |
| 4260 | |
| 4261 | divider &= 0xf; |
| 4262 | |
| 4263 | cur_cdclk = (vco << 1) / (divider + 1); |
| 4264 | |
| 4265 | return cur_cdclk; |
| 4266 | } |
| 4267 | |
| 4268 | static int valleyview_calc_cdclk(struct drm_i915_private *dev_priv, |
| 4269 | int max_pixclk) |
| 4270 | { |
| 4271 | int cur_cdclk; |
| 4272 | |
| 4273 | cur_cdclk = valleyview_cur_cdclk(dev_priv); |
| 4274 | |
| 4275 | /* |
| 4276 | * Really only a few cases to deal with, as only 4 CDclks are supported: |
| 4277 | * 200MHz |
| 4278 | * 267MHz |
| 4279 | * 320MHz |
| 4280 | * 400MHz |
| 4281 | * So we check to see whether we're above 90% of the lower bin and |
| 4282 | * adjust if needed. |
| 4283 | */ |
| 4284 | if (max_pixclk > 288000) { |
| 4285 | return 400; |
| 4286 | } else if (max_pixclk > 240000) { |
| 4287 | return 320; |
| 4288 | } else |
| 4289 | return 266; |
| 4290 | /* Looks like the 200MHz CDclk freq doesn't work on some configs */ |
| 4291 | } |
| 4292 | |
| 4293 | /* compute the max pixel clock for new configuration */ |
| 4294 | static int intel_mode_max_pixclk(struct drm_i915_private *dev_priv) |
| 4295 | { |
| 4296 | struct drm_device *dev = dev_priv->dev; |
| 4297 | struct intel_crtc *intel_crtc; |
| 4298 | int max_pixclk = 0; |
| 4299 | |
| 4300 | list_for_each_entry(intel_crtc, &dev->mode_config.crtc_list, |
| 4301 | base.head) { |
| 4302 | if (intel_crtc->new_enabled) |
| 4303 | max_pixclk = max(max_pixclk, |
| 4304 | intel_crtc->new_config->adjusted_mode.crtc_clock); |
| 4305 | } |
| 4306 | |
| 4307 | return max_pixclk; |
| 4308 | } |
| 4309 | |
| 4310 | static void valleyview_modeset_global_pipes(struct drm_device *dev, |
| 4311 | unsigned *prepare_pipes) |
| 4312 | { |
| 4313 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 4314 | struct intel_crtc *intel_crtc; |
| 4315 | int max_pixclk = intel_mode_max_pixclk(dev_priv); |
| 4316 | int cur_cdclk = valleyview_cur_cdclk(dev_priv); |
| 4317 | |
| 4318 | if (valleyview_calc_cdclk(dev_priv, max_pixclk) == cur_cdclk) |
| 4319 | return; |
| 4320 | |
| 4321 | /* disable/enable all currently active pipes while we change cdclk */ |
| 4322 | list_for_each_entry(intel_crtc, &dev->mode_config.crtc_list, |
| 4323 | base.head) |
| 4324 | if (intel_crtc->base.enabled) |
| 4325 | *prepare_pipes |= (1 << intel_crtc->pipe); |
| 4326 | } |
| 4327 | |
| 4328 | static void valleyview_modeset_global_resources(struct drm_device *dev) |
| 4329 | { |
| 4330 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 4331 | int max_pixclk = intel_mode_max_pixclk(dev_priv); |
| 4332 | int cur_cdclk = valleyview_cur_cdclk(dev_priv); |
| 4333 | int req_cdclk = valleyview_calc_cdclk(dev_priv, max_pixclk); |
| 4334 | |
| 4335 | if (req_cdclk != cur_cdclk) |
| 4336 | valleyview_set_cdclk(dev, req_cdclk); |
| 4337 | modeset_update_crtc_power_domains(dev); |
| 4338 | } |
| 4339 | |
| 4340 | static void valleyview_crtc_enable(struct drm_crtc *crtc) |
| 4341 | { |
| 4342 | struct drm_device *dev = crtc->dev; |
| 4343 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 4344 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 4345 | struct intel_encoder *encoder; |
| 4346 | int pipe = intel_crtc->pipe; |
| 4347 | int plane = intel_crtc->plane; |
| 4348 | bool is_dsi; |
| 4349 | |
| 4350 | WARN_ON(!crtc->enabled); |
| 4351 | |
| 4352 | if (intel_crtc->active) |
| 4353 | return; |
| 4354 | |
| 4355 | intel_crtc->active = true; |
| 4356 | |
| 4357 | for_each_encoder_on_crtc(dev, crtc, encoder) |
| 4358 | if (encoder->pre_pll_enable) |
| 4359 | encoder->pre_pll_enable(encoder); |
| 4360 | |
| 4361 | is_dsi = intel_pipe_has_type(crtc, INTEL_OUTPUT_DSI); |
| 4362 | |
| 4363 | if (!is_dsi) |
| 4364 | vlv_enable_pll(intel_crtc); |
| 4365 | |
| 4366 | for_each_encoder_on_crtc(dev, crtc, encoder) |
| 4367 | if (encoder->pre_enable) |
| 4368 | encoder->pre_enable(encoder); |
| 4369 | |
| 4370 | i9xx_pfit_enable(intel_crtc); |
| 4371 | |
| 4372 | intel_crtc_load_lut(crtc); |
| 4373 | |
| 4374 | intel_update_watermarks(crtc); |
| 4375 | intel_enable_pipe(intel_crtc); |
| 4376 | intel_set_cpu_fifo_underrun_reporting(dev, pipe, true); |
| 4377 | intel_enable_primary_plane(dev_priv, plane, pipe); |
| 4378 | intel_enable_planes(crtc); |
| 4379 | intel_crtc_update_cursor(crtc, true); |
| 4380 | |
| 4381 | intel_update_fbc(dev); |
| 4382 | |
| 4383 | for_each_encoder_on_crtc(dev, crtc, encoder) |
| 4384 | encoder->enable(encoder); |
| 4385 | } |
| 4386 | |
| 4387 | static void i9xx_crtc_enable(struct drm_crtc *crtc) |
| 4388 | { |
| 4389 | struct drm_device *dev = crtc->dev; |
| 4390 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 4391 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 4392 | struct intel_encoder *encoder; |
| 4393 | int pipe = intel_crtc->pipe; |
| 4394 | int plane = intel_crtc->plane; |
| 4395 | |
| 4396 | WARN_ON(!crtc->enabled); |
| 4397 | |
| 4398 | if (intel_crtc->active) |
| 4399 | return; |
| 4400 | |
| 4401 | intel_crtc->active = true; |
| 4402 | |
| 4403 | for_each_encoder_on_crtc(dev, crtc, encoder) |
| 4404 | if (encoder->pre_enable) |
| 4405 | encoder->pre_enable(encoder); |
| 4406 | |
| 4407 | i9xx_enable_pll(intel_crtc); |
| 4408 | |
| 4409 | i9xx_pfit_enable(intel_crtc); |
| 4410 | |
| 4411 | intel_crtc_load_lut(crtc); |
| 4412 | |
| 4413 | intel_update_watermarks(crtc); |
| 4414 | intel_enable_pipe(intel_crtc); |
| 4415 | intel_set_cpu_fifo_underrun_reporting(dev, pipe, true); |
| 4416 | intel_enable_primary_plane(dev_priv, plane, pipe); |
| 4417 | intel_enable_planes(crtc); |
| 4418 | /* The fixup needs to happen before cursor is enabled */ |
| 4419 | if (IS_G4X(dev)) |
| 4420 | g4x_fixup_plane(dev_priv, pipe); |
| 4421 | intel_crtc_update_cursor(crtc, true); |
| 4422 | |
| 4423 | /* Give the overlay scaler a chance to enable if it's on this pipe */ |
| 4424 | intel_crtc_dpms_overlay(intel_crtc, true); |
| 4425 | |
| 4426 | intel_update_fbc(dev); |
| 4427 | |
| 4428 | for_each_encoder_on_crtc(dev, crtc, encoder) |
| 4429 | encoder->enable(encoder); |
| 4430 | } |
| 4431 | |
| 4432 | static void i9xx_pfit_disable(struct intel_crtc *crtc) |
| 4433 | { |
| 4434 | struct drm_device *dev = crtc->base.dev; |
| 4435 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 4436 | |
| 4437 | if (!crtc->config.gmch_pfit.control) |
| 4438 | return; |
| 4439 | |
| 4440 | assert_pipe_disabled(dev_priv, crtc->pipe); |
| 4441 | |
| 4442 | DRM_DEBUG_DRIVER("disabling pfit, current: 0x%08x\n", |
| 4443 | I915_READ(PFIT_CONTROL)); |
| 4444 | I915_WRITE(PFIT_CONTROL, 0); |
| 4445 | } |
| 4446 | |
| 4447 | static void i9xx_crtc_disable(struct drm_crtc *crtc) |
| 4448 | { |
| 4449 | struct drm_device *dev = crtc->dev; |
| 4450 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 4451 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 4452 | struct intel_encoder *encoder; |
| 4453 | int pipe = intel_crtc->pipe; |
| 4454 | int plane = intel_crtc->plane; |
| 4455 | |
| 4456 | if (!intel_crtc->active) |
| 4457 | return; |
| 4458 | |
| 4459 | for_each_encoder_on_crtc(dev, crtc, encoder) |
| 4460 | encoder->disable(encoder); |
| 4461 | |
| 4462 | /* Give the overlay scaler a chance to disable if it's on this pipe */ |
| 4463 | intel_crtc_wait_for_pending_flips(crtc); |
| 4464 | drm_vblank_off(dev, pipe); |
| 4465 | |
| 4466 | if (dev_priv->fbc.plane == plane) |
| 4467 | intel_disable_fbc(dev); |
| 4468 | |
| 4469 | intel_crtc_dpms_overlay(intel_crtc, false); |
| 4470 | intel_crtc_update_cursor(crtc, false); |
| 4471 | intel_disable_planes(crtc); |
| 4472 | intel_disable_primary_plane(dev_priv, plane, pipe); |
| 4473 | |
| 4474 | intel_set_cpu_fifo_underrun_reporting(dev, pipe, false); |
| 4475 | intel_disable_pipe(dev_priv, pipe); |
| 4476 | |
| 4477 | i9xx_pfit_disable(intel_crtc); |
| 4478 | |
| 4479 | for_each_encoder_on_crtc(dev, crtc, encoder) |
| 4480 | if (encoder->post_disable) |
| 4481 | encoder->post_disable(encoder); |
| 4482 | |
| 4483 | if (IS_VALLEYVIEW(dev) && !intel_pipe_has_type(crtc, INTEL_OUTPUT_DSI)) |
| 4484 | vlv_disable_pll(dev_priv, pipe); |
| 4485 | else if (!IS_VALLEYVIEW(dev)) |
| 4486 | i9xx_disable_pll(dev_priv, pipe); |
| 4487 | |
| 4488 | intel_crtc->active = false; |
| 4489 | intel_update_watermarks(crtc); |
| 4490 | |
| 4491 | intel_update_fbc(dev); |
| 4492 | } |
| 4493 | |
| 4494 | static void i9xx_crtc_off(struct drm_crtc *crtc) |
| 4495 | { |
| 4496 | } |
| 4497 | |
| 4498 | static void intel_crtc_update_sarea(struct drm_crtc *crtc, |
| 4499 | bool enabled) |
| 4500 | { |
| 4501 | struct drm_device *dev = crtc->dev; |
| 4502 | struct drm_i915_master_private *master_priv; |
| 4503 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 4504 | int pipe = intel_crtc->pipe; |
| 4505 | |
| 4506 | if (!dev->primary->master) |
| 4507 | return; |
| 4508 | |
| 4509 | master_priv = dev->primary->master->driver_priv; |
| 4510 | if (!master_priv->sarea_priv) |
| 4511 | return; |
| 4512 | |
| 4513 | switch (pipe) { |
| 4514 | case 0: |
| 4515 | master_priv->sarea_priv->pipeA_w = enabled ? crtc->mode.hdisplay : 0; |
| 4516 | master_priv->sarea_priv->pipeA_h = enabled ? crtc->mode.vdisplay : 0; |
| 4517 | break; |
| 4518 | case 1: |
| 4519 | master_priv->sarea_priv->pipeB_w = enabled ? crtc->mode.hdisplay : 0; |
| 4520 | master_priv->sarea_priv->pipeB_h = enabled ? crtc->mode.vdisplay : 0; |
| 4521 | break; |
| 4522 | default: |
| 4523 | DRM_ERROR("Can't update pipe %c in SAREA\n", pipe_name(pipe)); |
| 4524 | break; |
| 4525 | } |
| 4526 | } |
| 4527 | |
| 4528 | /** |
| 4529 | * Sets the power management mode of the pipe and plane. |
| 4530 | */ |
| 4531 | void intel_crtc_update_dpms(struct drm_crtc *crtc) |
| 4532 | { |
| 4533 | struct drm_device *dev = crtc->dev; |
| 4534 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 4535 | struct intel_encoder *intel_encoder; |
| 4536 | bool enable = false; |
| 4537 | |
| 4538 | for_each_encoder_on_crtc(dev, crtc, intel_encoder) |
| 4539 | enable |= intel_encoder->connectors_active; |
| 4540 | |
| 4541 | if (enable) |
| 4542 | dev_priv->display.crtc_enable(crtc); |
| 4543 | else |
| 4544 | dev_priv->display.crtc_disable(crtc); |
| 4545 | |
| 4546 | intel_crtc_update_sarea(crtc, enable); |
| 4547 | } |
| 4548 | |
| 4549 | static void intel_crtc_disable(struct drm_crtc *crtc) |
| 4550 | { |
| 4551 | struct drm_device *dev = crtc->dev; |
| 4552 | struct drm_connector *connector; |
| 4553 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 4554 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 4555 | |
| 4556 | /* crtc should still be enabled when we disable it. */ |
| 4557 | WARN_ON(!crtc->enabled); |
| 4558 | |
| 4559 | dev_priv->display.crtc_disable(crtc); |
| 4560 | intel_crtc->eld_vld = false; |
| 4561 | intel_crtc_update_sarea(crtc, false); |
| 4562 | dev_priv->display.off(crtc); |
| 4563 | |
| 4564 | assert_plane_disabled(dev->dev_private, to_intel_crtc(crtc)->plane); |
| 4565 | assert_cursor_disabled(dev_priv, to_intel_crtc(crtc)->pipe); |
| 4566 | assert_pipe_disabled(dev->dev_private, to_intel_crtc(crtc)->pipe); |
| 4567 | |
| 4568 | if (crtc->fb) { |
| 4569 | mutex_lock(&dev->struct_mutex); |
| 4570 | intel_unpin_fb_obj(to_intel_framebuffer(crtc->fb)->obj); |
| 4571 | mutex_unlock(&dev->struct_mutex); |
| 4572 | crtc->fb = NULL; |
| 4573 | } |
| 4574 | |
| 4575 | /* Update computed state. */ |
| 4576 | list_for_each_entry(connector, &dev->mode_config.connector_list, head) { |
| 4577 | if (!connector->encoder || !connector->encoder->crtc) |
| 4578 | continue; |
| 4579 | |
| 4580 | if (connector->encoder->crtc != crtc) |
| 4581 | continue; |
| 4582 | |
| 4583 | connector->dpms = DRM_MODE_DPMS_OFF; |
| 4584 | to_intel_encoder(connector->encoder)->connectors_active = false; |
| 4585 | } |
| 4586 | } |
| 4587 | |
| 4588 | void intel_encoder_destroy(struct drm_encoder *encoder) |
| 4589 | { |
| 4590 | struct intel_encoder *intel_encoder = to_intel_encoder(encoder); |
| 4591 | |
| 4592 | drm_encoder_cleanup(encoder); |
| 4593 | kfree(intel_encoder); |
| 4594 | } |
| 4595 | |
| 4596 | /* Simple dpms helper for encoders with just one connector, no cloning and only |
| 4597 | * one kind of off state. It clamps all !ON modes to fully OFF and changes the |
| 4598 | * state of the entire output pipe. */ |
| 4599 | static void intel_encoder_dpms(struct intel_encoder *encoder, int mode) |
| 4600 | { |
| 4601 | if (mode == DRM_MODE_DPMS_ON) { |
| 4602 | encoder->connectors_active = true; |
| 4603 | |
| 4604 | intel_crtc_update_dpms(encoder->base.crtc); |
| 4605 | } else { |
| 4606 | encoder->connectors_active = false; |
| 4607 | |
| 4608 | intel_crtc_update_dpms(encoder->base.crtc); |
| 4609 | } |
| 4610 | } |
| 4611 | |
| 4612 | /* Cross check the actual hw state with our own modeset state tracking (and it's |
| 4613 | * internal consistency). */ |
| 4614 | static void intel_connector_check_state(struct intel_connector *connector) |
| 4615 | { |
| 4616 | if (connector->get_hw_state(connector)) { |
| 4617 | struct intel_encoder *encoder = connector->encoder; |
| 4618 | struct drm_crtc *crtc; |
| 4619 | bool encoder_enabled; |
| 4620 | enum pipe pipe; |
| 4621 | |
| 4622 | DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", |
| 4623 | connector->base.base.id, |
| 4624 | drm_get_connector_name(&connector->base)); |
| 4625 | |
| 4626 | WARN(connector->base.dpms == DRM_MODE_DPMS_OFF, |
| 4627 | "wrong connector dpms state\n"); |
| 4628 | WARN(connector->base.encoder != &encoder->base, |
| 4629 | "active connector not linked to encoder\n"); |
| 4630 | WARN(!encoder->connectors_active, |
| 4631 | "encoder->connectors_active not set\n"); |
| 4632 | |
| 4633 | encoder_enabled = encoder->get_hw_state(encoder, &pipe); |
| 4634 | WARN(!encoder_enabled, "encoder not enabled\n"); |
| 4635 | if (WARN_ON(!encoder->base.crtc)) |
| 4636 | return; |
| 4637 | |
| 4638 | crtc = encoder->base.crtc; |
| 4639 | |
| 4640 | WARN(!crtc->enabled, "crtc not enabled\n"); |
| 4641 | WARN(!to_intel_crtc(crtc)->active, "crtc not active\n"); |
| 4642 | WARN(pipe != to_intel_crtc(crtc)->pipe, |
| 4643 | "encoder active on the wrong pipe\n"); |
| 4644 | } |
| 4645 | } |
| 4646 | |
| 4647 | /* Even simpler default implementation, if there's really no special case to |
| 4648 | * consider. */ |
| 4649 | void intel_connector_dpms(struct drm_connector *connector, int mode) |
| 4650 | { |
| 4651 | /* All the simple cases only support two dpms states. */ |
| 4652 | if (mode != DRM_MODE_DPMS_ON) |
| 4653 | mode = DRM_MODE_DPMS_OFF; |
| 4654 | |
| 4655 | if (mode == connector->dpms) |
| 4656 | return; |
| 4657 | |
| 4658 | connector->dpms = mode; |
| 4659 | |
| 4660 | /* Only need to change hw state when actually enabled */ |
| 4661 | if (connector->encoder) |
| 4662 | intel_encoder_dpms(to_intel_encoder(connector->encoder), mode); |
| 4663 | |
| 4664 | intel_modeset_check_state(connector->dev); |
| 4665 | } |
| 4666 | |
| 4667 | /* Simple connector->get_hw_state implementation for encoders that support only |
| 4668 | * one connector and no cloning and hence the encoder state determines the state |
| 4669 | * of the connector. */ |
| 4670 | bool intel_connector_get_hw_state(struct intel_connector *connector) |
| 4671 | { |
| 4672 | enum pipe pipe = 0; |
| 4673 | struct intel_encoder *encoder = connector->encoder; |
| 4674 | |
| 4675 | return encoder->get_hw_state(encoder, &pipe); |
| 4676 | } |
| 4677 | |
| 4678 | static bool ironlake_check_fdi_lanes(struct drm_device *dev, enum pipe pipe, |
| 4679 | struct intel_crtc_config *pipe_config) |
| 4680 | { |
| 4681 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 4682 | struct intel_crtc *pipe_B_crtc = |
| 4683 | to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_B]); |
| 4684 | |
| 4685 | DRM_DEBUG_KMS("checking fdi config on pipe %c, lanes %i\n", |
| 4686 | pipe_name(pipe), pipe_config->fdi_lanes); |
| 4687 | if (pipe_config->fdi_lanes > 4) { |
| 4688 | DRM_DEBUG_KMS("invalid fdi lane config on pipe %c: %i lanes\n", |
| 4689 | pipe_name(pipe), pipe_config->fdi_lanes); |
| 4690 | return false; |
| 4691 | } |
| 4692 | |
| 4693 | if (IS_HASWELL(dev) || IS_BROADWELL(dev)) { |
| 4694 | if (pipe_config->fdi_lanes > 2) { |
| 4695 | DRM_DEBUG_KMS("only 2 lanes on haswell, required: %i lanes\n", |
| 4696 | pipe_config->fdi_lanes); |
| 4697 | return false; |
| 4698 | } else { |
| 4699 | return true; |
| 4700 | } |
| 4701 | } |
| 4702 | |
| 4703 | if (INTEL_INFO(dev)->num_pipes == 2) |
| 4704 | return true; |
| 4705 | |
| 4706 | /* Ivybridge 3 pipe is really complicated */ |
| 4707 | switch (pipe) { |
| 4708 | case PIPE_A: |
| 4709 | return true; |
| 4710 | case PIPE_B: |
| 4711 | if (dev_priv->pipe_to_crtc_mapping[PIPE_C]->enabled && |
| 4712 | pipe_config->fdi_lanes > 2) { |
| 4713 | DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %c: %i lanes\n", |
| 4714 | pipe_name(pipe), pipe_config->fdi_lanes); |
| 4715 | return false; |
| 4716 | } |
| 4717 | return true; |
| 4718 | case PIPE_C: |
| 4719 | if (!pipe_has_enabled_pch(pipe_B_crtc) || |
| 4720 | pipe_B_crtc->config.fdi_lanes <= 2) { |
| 4721 | if (pipe_config->fdi_lanes > 2) { |
| 4722 | DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %c: %i lanes\n", |
| 4723 | pipe_name(pipe), pipe_config->fdi_lanes); |
| 4724 | return false; |
| 4725 | } |
| 4726 | } else { |
| 4727 | DRM_DEBUG_KMS("fdi link B uses too many lanes to enable link C\n"); |
| 4728 | return false; |
| 4729 | } |
| 4730 | return true; |
| 4731 | default: |
| 4732 | BUG(); |
| 4733 | } |
| 4734 | } |
| 4735 | |
| 4736 | #define RETRY 1 |
| 4737 | static int ironlake_fdi_compute_config(struct intel_crtc *intel_crtc, |
| 4738 | struct intel_crtc_config *pipe_config) |
| 4739 | { |
| 4740 | struct drm_device *dev = intel_crtc->base.dev; |
| 4741 | struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode; |
| 4742 | int lane, link_bw, fdi_dotclock; |
| 4743 | bool setup_ok, needs_recompute = false; |
| 4744 | |
| 4745 | retry: |
| 4746 | /* FDI is a binary signal running at ~2.7GHz, encoding |
| 4747 | * each output octet as 10 bits. The actual frequency |
| 4748 | * is stored as a divider into a 100MHz clock, and the |
| 4749 | * mode pixel clock is stored in units of 1KHz. |
| 4750 | * Hence the bw of each lane in terms of the mode signal |
| 4751 | * is: |
| 4752 | */ |
| 4753 | link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10; |
| 4754 | |
| 4755 | fdi_dotclock = adjusted_mode->crtc_clock; |
| 4756 | |
| 4757 | lane = ironlake_get_lanes_required(fdi_dotclock, link_bw, |
| 4758 | pipe_config->pipe_bpp); |
| 4759 | |
| 4760 | pipe_config->fdi_lanes = lane; |
| 4761 | |
| 4762 | intel_link_compute_m_n(pipe_config->pipe_bpp, lane, fdi_dotclock, |
| 4763 | link_bw, &pipe_config->fdi_m_n); |
| 4764 | |
| 4765 | setup_ok = ironlake_check_fdi_lanes(intel_crtc->base.dev, |
| 4766 | intel_crtc->pipe, pipe_config); |
| 4767 | if (!setup_ok && pipe_config->pipe_bpp > 6*3) { |
| 4768 | pipe_config->pipe_bpp -= 2*3; |
| 4769 | DRM_DEBUG_KMS("fdi link bw constraint, reducing pipe bpp to %i\n", |
| 4770 | pipe_config->pipe_bpp); |
| 4771 | needs_recompute = true; |
| 4772 | pipe_config->bw_constrained = true; |
| 4773 | |
| 4774 | goto retry; |
| 4775 | } |
| 4776 | |
| 4777 | if (needs_recompute) |
| 4778 | return RETRY; |
| 4779 | |
| 4780 | return setup_ok ? 0 : -EINVAL; |
| 4781 | } |
| 4782 | |
| 4783 | static void hsw_compute_ips_config(struct intel_crtc *crtc, |
| 4784 | struct intel_crtc_config *pipe_config) |
| 4785 | { |
| 4786 | pipe_config->ips_enabled = i915.enable_ips && |
| 4787 | hsw_crtc_supports_ips(crtc) && |
| 4788 | pipe_config->pipe_bpp <= 24; |
| 4789 | } |
| 4790 | |
| 4791 | static int intel_crtc_compute_config(struct intel_crtc *crtc, |
| 4792 | struct intel_crtc_config *pipe_config) |
| 4793 | { |
| 4794 | struct drm_device *dev = crtc->base.dev; |
| 4795 | struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode; |
| 4796 | |
| 4797 | /* FIXME should check pixel clock limits on all platforms */ |
| 4798 | if (INTEL_INFO(dev)->gen < 4) { |
| 4799 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 4800 | int clock_limit = |
| 4801 | dev_priv->display.get_display_clock_speed(dev); |
| 4802 | |
| 4803 | /* |
| 4804 | * Enable pixel doubling when the dot clock |
| 4805 | * is > 90% of the (display) core speed. |
| 4806 | * |
| 4807 | * GDG double wide on either pipe, |
| 4808 | * otherwise pipe A only. |
| 4809 | */ |
| 4810 | if ((crtc->pipe == PIPE_A || IS_I915G(dev)) && |
| 4811 | adjusted_mode->crtc_clock > clock_limit * 9 / 10) { |
| 4812 | clock_limit *= 2; |
| 4813 | pipe_config->double_wide = true; |
| 4814 | } |
| 4815 | |
| 4816 | if (adjusted_mode->crtc_clock > clock_limit * 9 / 10) |
| 4817 | return -EINVAL; |
| 4818 | } |
| 4819 | |
| 4820 | /* |
| 4821 | * Pipe horizontal size must be even in: |
| 4822 | * - DVO ganged mode |
| 4823 | * - LVDS dual channel mode |
| 4824 | * - Double wide pipe |
| 4825 | */ |
| 4826 | if ((intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) && |
| 4827 | intel_is_dual_link_lvds(dev)) || pipe_config->double_wide) |
| 4828 | pipe_config->pipe_src_w &= ~1; |
| 4829 | |
| 4830 | /* Cantiga+ cannot handle modes with a hsync front porch of 0. |
| 4831 | * WaPruneModeWithIncorrectHsyncOffset:ctg,elk,ilk,snb,ivb,vlv,hsw. |
| 4832 | */ |
| 4833 | if ((INTEL_INFO(dev)->gen > 4 || IS_G4X(dev)) && |
| 4834 | adjusted_mode->hsync_start == adjusted_mode->hdisplay) |
| 4835 | return -EINVAL; |
| 4836 | |
| 4837 | if ((IS_G4X(dev) || IS_VALLEYVIEW(dev)) && pipe_config->pipe_bpp > 10*3) { |
| 4838 | pipe_config->pipe_bpp = 10*3; /* 12bpc is gen5+ */ |
| 4839 | } else if (INTEL_INFO(dev)->gen <= 4 && pipe_config->pipe_bpp > 8*3) { |
| 4840 | /* only a 8bpc pipe, with 6bpc dither through the panel fitter |
| 4841 | * for lvds. */ |
| 4842 | pipe_config->pipe_bpp = 8*3; |
| 4843 | } |
| 4844 | |
| 4845 | if (HAS_IPS(dev)) |
| 4846 | hsw_compute_ips_config(crtc, pipe_config); |
| 4847 | |
| 4848 | /* XXX: PCH clock sharing is done in ->mode_set, so make sure the old |
| 4849 | * clock survives for now. */ |
| 4850 | if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) |
| 4851 | pipe_config->shared_dpll = crtc->config.shared_dpll; |
| 4852 | |
| 4853 | if (pipe_config->has_pch_encoder) |
| 4854 | return ironlake_fdi_compute_config(crtc, pipe_config); |
| 4855 | |
| 4856 | return 0; |
| 4857 | } |
| 4858 | |
| 4859 | static int valleyview_get_display_clock_speed(struct drm_device *dev) |
| 4860 | { |
| 4861 | return 400000; /* FIXME */ |
| 4862 | } |
| 4863 | |
| 4864 | static int i945_get_display_clock_speed(struct drm_device *dev) |
| 4865 | { |
| 4866 | return 400000; |
| 4867 | } |
| 4868 | |
| 4869 | static int i915_get_display_clock_speed(struct drm_device *dev) |
| 4870 | { |
| 4871 | return 333000; |
| 4872 | } |
| 4873 | |
| 4874 | static int i9xx_misc_get_display_clock_speed(struct drm_device *dev) |
| 4875 | { |
| 4876 | return 200000; |
| 4877 | } |
| 4878 | |
| 4879 | static int pnv_get_display_clock_speed(struct drm_device *dev) |
| 4880 | { |
| 4881 | u16 gcfgc = 0; |
| 4882 | |
| 4883 | pci_read_config_word(dev->pdev, GCFGC, &gcfgc); |
| 4884 | |
| 4885 | switch (gcfgc & GC_DISPLAY_CLOCK_MASK) { |
| 4886 | case GC_DISPLAY_CLOCK_267_MHZ_PNV: |
| 4887 | return 267000; |
| 4888 | case GC_DISPLAY_CLOCK_333_MHZ_PNV: |
| 4889 | return 333000; |
| 4890 | case GC_DISPLAY_CLOCK_444_MHZ_PNV: |
| 4891 | return 444000; |
| 4892 | case GC_DISPLAY_CLOCK_200_MHZ_PNV: |
| 4893 | return 200000; |
| 4894 | default: |
| 4895 | DRM_ERROR("Unknown pnv display core clock 0x%04x\n", gcfgc); |
| 4896 | case GC_DISPLAY_CLOCK_133_MHZ_PNV: |
| 4897 | return 133000; |
| 4898 | case GC_DISPLAY_CLOCK_167_MHZ_PNV: |
| 4899 | return 167000; |
| 4900 | } |
| 4901 | } |
| 4902 | |
| 4903 | static int i915gm_get_display_clock_speed(struct drm_device *dev) |
| 4904 | { |
| 4905 | u16 gcfgc = 0; |
| 4906 | |
| 4907 | pci_read_config_word(dev->pdev, GCFGC, &gcfgc); |
| 4908 | |
| 4909 | if (gcfgc & GC_LOW_FREQUENCY_ENABLE) |
| 4910 | return 133000; |
| 4911 | else { |
| 4912 | switch (gcfgc & GC_DISPLAY_CLOCK_MASK) { |
| 4913 | case GC_DISPLAY_CLOCK_333_MHZ: |
| 4914 | return 333000; |
| 4915 | default: |
| 4916 | case GC_DISPLAY_CLOCK_190_200_MHZ: |
| 4917 | return 190000; |
| 4918 | } |
| 4919 | } |
| 4920 | } |
| 4921 | |
| 4922 | static int i865_get_display_clock_speed(struct drm_device *dev) |
| 4923 | { |
| 4924 | return 266000; |
| 4925 | } |
| 4926 | |
| 4927 | static int i855_get_display_clock_speed(struct drm_device *dev) |
| 4928 | { |
| 4929 | u16 hpllcc = 0; |
| 4930 | /* Assume that the hardware is in the high speed state. This |
| 4931 | * should be the default. |
| 4932 | */ |
| 4933 | switch (hpllcc & GC_CLOCK_CONTROL_MASK) { |
| 4934 | case GC_CLOCK_133_200: |
| 4935 | case GC_CLOCK_100_200: |
| 4936 | return 200000; |
| 4937 | case GC_CLOCK_166_250: |
| 4938 | return 250000; |
| 4939 | case GC_CLOCK_100_133: |
| 4940 | return 133000; |
| 4941 | } |
| 4942 | |
| 4943 | /* Shouldn't happen */ |
| 4944 | return 0; |
| 4945 | } |
| 4946 | |
| 4947 | static int i830_get_display_clock_speed(struct drm_device *dev) |
| 4948 | { |
| 4949 | return 133000; |
| 4950 | } |
| 4951 | |
| 4952 | static void |
| 4953 | intel_reduce_m_n_ratio(uint32_t *num, uint32_t *den) |
| 4954 | { |
| 4955 | while (*num > DATA_LINK_M_N_MASK || |
| 4956 | *den > DATA_LINK_M_N_MASK) { |
| 4957 | *num >>= 1; |
| 4958 | *den >>= 1; |
| 4959 | } |
| 4960 | } |
| 4961 | |
| 4962 | static void compute_m_n(unsigned int m, unsigned int n, |
| 4963 | uint32_t *ret_m, uint32_t *ret_n) |
| 4964 | { |
| 4965 | *ret_n = min_t(unsigned int, roundup_pow_of_two(n), DATA_LINK_N_MAX); |
| 4966 | *ret_m = div_u64((uint64_t) m * *ret_n, n); |
| 4967 | intel_reduce_m_n_ratio(ret_m, ret_n); |
| 4968 | } |
| 4969 | |
| 4970 | void |
| 4971 | intel_link_compute_m_n(int bits_per_pixel, int nlanes, |
| 4972 | int pixel_clock, int link_clock, |
| 4973 | struct intel_link_m_n *m_n) |
| 4974 | { |
| 4975 | m_n->tu = 64; |
| 4976 | |
| 4977 | compute_m_n(bits_per_pixel * pixel_clock, |
| 4978 | link_clock * nlanes * 8, |
| 4979 | &m_n->gmch_m, &m_n->gmch_n); |
| 4980 | |
| 4981 | compute_m_n(pixel_clock, link_clock, |
| 4982 | &m_n->link_m, &m_n->link_n); |
| 4983 | } |
| 4984 | |
| 4985 | static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv) |
| 4986 | { |
| 4987 | if (i915.panel_use_ssc >= 0) |
| 4988 | return i915.panel_use_ssc != 0; |
| 4989 | return dev_priv->vbt.lvds_use_ssc |
| 4990 | && !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE); |
| 4991 | } |
| 4992 | |
| 4993 | static int i9xx_get_refclk(struct drm_crtc *crtc, int num_connectors) |
| 4994 | { |
| 4995 | struct drm_device *dev = crtc->dev; |
| 4996 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 4997 | int refclk; |
| 4998 | |
| 4999 | if (IS_VALLEYVIEW(dev)) { |
| 5000 | refclk = 100000; |
| 5001 | } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) && |
| 5002 | intel_panel_use_ssc(dev_priv) && num_connectors < 2) { |
| 5003 | refclk = dev_priv->vbt.lvds_ssc_freq; |
| 5004 | DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n", refclk); |
| 5005 | } else if (!IS_GEN2(dev)) { |
| 5006 | refclk = 96000; |
| 5007 | } else { |
| 5008 | refclk = 48000; |
| 5009 | } |
| 5010 | |
| 5011 | return refclk; |
| 5012 | } |
| 5013 | |
| 5014 | static uint32_t pnv_dpll_compute_fp(struct dpll *dpll) |
| 5015 | { |
| 5016 | return (1 << dpll->n) << 16 | dpll->m2; |
| 5017 | } |
| 5018 | |
| 5019 | static uint32_t i9xx_dpll_compute_fp(struct dpll *dpll) |
| 5020 | { |
| 5021 | return dpll->n << 16 | dpll->m1 << 8 | dpll->m2; |
| 5022 | } |
| 5023 | |
| 5024 | static void i9xx_update_pll_dividers(struct intel_crtc *crtc, |
| 5025 | intel_clock_t *reduced_clock) |
| 5026 | { |
| 5027 | struct drm_device *dev = crtc->base.dev; |
| 5028 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 5029 | int pipe = crtc->pipe; |
| 5030 | u32 fp, fp2 = 0; |
| 5031 | |
| 5032 | if (IS_PINEVIEW(dev)) { |
| 5033 | fp = pnv_dpll_compute_fp(&crtc->config.dpll); |
| 5034 | if (reduced_clock) |
| 5035 | fp2 = pnv_dpll_compute_fp(reduced_clock); |
| 5036 | } else { |
| 5037 | fp = i9xx_dpll_compute_fp(&crtc->config.dpll); |
| 5038 | if (reduced_clock) |
| 5039 | fp2 = i9xx_dpll_compute_fp(reduced_clock); |
| 5040 | } |
| 5041 | |
| 5042 | I915_WRITE(FP0(pipe), fp); |
| 5043 | crtc->config.dpll_hw_state.fp0 = fp; |
| 5044 | |
| 5045 | crtc->lowfreq_avail = false; |
| 5046 | if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) && |
| 5047 | reduced_clock && i915.powersave) { |
| 5048 | I915_WRITE(FP1(pipe), fp2); |
| 5049 | crtc->config.dpll_hw_state.fp1 = fp2; |
| 5050 | crtc->lowfreq_avail = true; |
| 5051 | } else { |
| 5052 | I915_WRITE(FP1(pipe), fp); |
| 5053 | crtc->config.dpll_hw_state.fp1 = fp; |
| 5054 | } |
| 5055 | } |
| 5056 | |
| 5057 | static void vlv_pllb_recal_opamp(struct drm_i915_private *dev_priv, enum pipe |
| 5058 | pipe) |
| 5059 | { |
| 5060 | u32 reg_val; |
| 5061 | |
| 5062 | /* |
| 5063 | * PLLB opamp always calibrates to max value of 0x3f, force enable it |
| 5064 | * and set it to a reasonable value instead. |
| 5065 | */ |
| 5066 | reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW9(1)); |
| 5067 | reg_val &= 0xffffff00; |
| 5068 | reg_val |= 0x00000030; |
| 5069 | vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9(1), reg_val); |
| 5070 | |
| 5071 | reg_val = vlv_dpio_read(dev_priv, pipe, VLV_REF_DW13); |
| 5072 | reg_val &= 0x8cffffff; |
| 5073 | reg_val = 0x8c000000; |
| 5074 | vlv_dpio_write(dev_priv, pipe, VLV_REF_DW13, reg_val); |
| 5075 | |
| 5076 | reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW9(1)); |
| 5077 | reg_val &= 0xffffff00; |
| 5078 | vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9(1), reg_val); |
| 5079 | |
| 5080 | reg_val = vlv_dpio_read(dev_priv, pipe, VLV_REF_DW13); |
| 5081 | reg_val &= 0x00ffffff; |
| 5082 | reg_val |= 0xb0000000; |
| 5083 | vlv_dpio_write(dev_priv, pipe, VLV_REF_DW13, reg_val); |
| 5084 | } |
| 5085 | |
| 5086 | static void intel_pch_transcoder_set_m_n(struct intel_crtc *crtc, |
| 5087 | struct intel_link_m_n *m_n) |
| 5088 | { |
| 5089 | struct drm_device *dev = crtc->base.dev; |
| 5090 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 5091 | int pipe = crtc->pipe; |
| 5092 | |
| 5093 | I915_WRITE(PCH_TRANS_DATA_M1(pipe), TU_SIZE(m_n->tu) | m_n->gmch_m); |
| 5094 | I915_WRITE(PCH_TRANS_DATA_N1(pipe), m_n->gmch_n); |
| 5095 | I915_WRITE(PCH_TRANS_LINK_M1(pipe), m_n->link_m); |
| 5096 | I915_WRITE(PCH_TRANS_LINK_N1(pipe), m_n->link_n); |
| 5097 | } |
| 5098 | |
| 5099 | static void intel_cpu_transcoder_set_m_n(struct intel_crtc *crtc, |
| 5100 | struct intel_link_m_n *m_n) |
| 5101 | { |
| 5102 | struct drm_device *dev = crtc->base.dev; |
| 5103 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 5104 | int pipe = crtc->pipe; |
| 5105 | enum transcoder transcoder = crtc->config.cpu_transcoder; |
| 5106 | |
| 5107 | if (INTEL_INFO(dev)->gen >= 5) { |
| 5108 | I915_WRITE(PIPE_DATA_M1(transcoder), TU_SIZE(m_n->tu) | m_n->gmch_m); |
| 5109 | I915_WRITE(PIPE_DATA_N1(transcoder), m_n->gmch_n); |
| 5110 | I915_WRITE(PIPE_LINK_M1(transcoder), m_n->link_m); |
| 5111 | I915_WRITE(PIPE_LINK_N1(transcoder), m_n->link_n); |
| 5112 | } else { |
| 5113 | I915_WRITE(PIPE_DATA_M_G4X(pipe), TU_SIZE(m_n->tu) | m_n->gmch_m); |
| 5114 | I915_WRITE(PIPE_DATA_N_G4X(pipe), m_n->gmch_n); |
| 5115 | I915_WRITE(PIPE_LINK_M_G4X(pipe), m_n->link_m); |
| 5116 | I915_WRITE(PIPE_LINK_N_G4X(pipe), m_n->link_n); |
| 5117 | } |
| 5118 | } |
| 5119 | |
| 5120 | static void intel_dp_set_m_n(struct intel_crtc *crtc) |
| 5121 | { |
| 5122 | if (crtc->config.has_pch_encoder) |
| 5123 | intel_pch_transcoder_set_m_n(crtc, &crtc->config.dp_m_n); |
| 5124 | else |
| 5125 | intel_cpu_transcoder_set_m_n(crtc, &crtc->config.dp_m_n); |
| 5126 | } |
| 5127 | |
| 5128 | static void vlv_update_pll(struct intel_crtc *crtc) |
| 5129 | { |
| 5130 | struct drm_device *dev = crtc->base.dev; |
| 5131 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 5132 | int pipe = crtc->pipe; |
| 5133 | u32 dpll, mdiv; |
| 5134 | u32 bestn, bestm1, bestm2, bestp1, bestp2; |
| 5135 | u32 coreclk, reg_val, dpll_md; |
| 5136 | |
| 5137 | mutex_lock(&dev_priv->dpio_lock); |
| 5138 | |
| 5139 | bestn = crtc->config.dpll.n; |
| 5140 | bestm1 = crtc->config.dpll.m1; |
| 5141 | bestm2 = crtc->config.dpll.m2; |
| 5142 | bestp1 = crtc->config.dpll.p1; |
| 5143 | bestp2 = crtc->config.dpll.p2; |
| 5144 | |
| 5145 | /* See eDP HDMI DPIO driver vbios notes doc */ |
| 5146 | |
| 5147 | /* PLL B needs special handling */ |
| 5148 | if (pipe) |
| 5149 | vlv_pllb_recal_opamp(dev_priv, pipe); |
| 5150 | |
| 5151 | /* Set up Tx target for periodic Rcomp update */ |
| 5152 | vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9_BCAST, 0x0100000f); |
| 5153 | |
| 5154 | /* Disable target IRef on PLL */ |
| 5155 | reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW8(pipe)); |
| 5156 | reg_val &= 0x00ffffff; |
| 5157 | vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW8(pipe), reg_val); |
| 5158 | |
| 5159 | /* Disable fast lock */ |
| 5160 | vlv_dpio_write(dev_priv, pipe, VLV_CMN_DW0, 0x610); |
| 5161 | |
| 5162 | /* Set idtafcrecal before PLL is enabled */ |
| 5163 | mdiv = ((bestm1 << DPIO_M1DIV_SHIFT) | (bestm2 & DPIO_M2DIV_MASK)); |
| 5164 | mdiv |= ((bestp1 << DPIO_P1_SHIFT) | (bestp2 << DPIO_P2_SHIFT)); |
| 5165 | mdiv |= ((bestn << DPIO_N_SHIFT)); |
| 5166 | mdiv |= (1 << DPIO_K_SHIFT); |
| 5167 | |
| 5168 | /* |
| 5169 | * Post divider depends on pixel clock rate, DAC vs digital (and LVDS, |
| 5170 | * but we don't support that). |
| 5171 | * Note: don't use the DAC post divider as it seems unstable. |
| 5172 | */ |
| 5173 | mdiv |= (DPIO_POST_DIV_HDMIDP << DPIO_POST_DIV_SHIFT); |
| 5174 | vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW3(pipe), mdiv); |
| 5175 | |
| 5176 | mdiv |= DPIO_ENABLE_CALIBRATION; |
| 5177 | vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW3(pipe), mdiv); |
| 5178 | |
| 5179 | /* Set HBR and RBR LPF coefficients */ |
| 5180 | if (crtc->config.port_clock == 162000 || |
| 5181 | intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_ANALOG) || |
| 5182 | intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_HDMI)) |
| 5183 | vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW10(pipe), |
| 5184 | 0x009f0003); |
| 5185 | else |
| 5186 | vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW10(pipe), |
| 5187 | 0x00d0000f); |
| 5188 | |
| 5189 | if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_EDP) || |
| 5190 | intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DISPLAYPORT)) { |
| 5191 | /* Use SSC source */ |
| 5192 | if (!pipe) |
| 5193 | vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe), |
| 5194 | 0x0df40000); |
| 5195 | else |
| 5196 | vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe), |
| 5197 | 0x0df70000); |
| 5198 | } else { /* HDMI or VGA */ |
| 5199 | /* Use bend source */ |
| 5200 | if (!pipe) |
| 5201 | vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe), |
| 5202 | 0x0df70000); |
| 5203 | else |
| 5204 | vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe), |
| 5205 | 0x0df40000); |
| 5206 | } |
| 5207 | |
| 5208 | coreclk = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW7(pipe)); |
| 5209 | coreclk = (coreclk & 0x0000ff00) | 0x01c00000; |
| 5210 | if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DISPLAYPORT) || |
| 5211 | intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_EDP)) |
| 5212 | coreclk |= 0x01000000; |
| 5213 | vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW7(pipe), coreclk); |
| 5214 | |
| 5215 | vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW11(pipe), 0x87871000); |
| 5216 | |
| 5217 | /* |
| 5218 | * Enable DPIO clock input. We should never disable the reference |
| 5219 | * clock for pipe B, since VGA hotplug / manual detection depends |
| 5220 | * on it. |
| 5221 | */ |
| 5222 | dpll = DPLL_EXT_BUFFER_ENABLE_VLV | DPLL_REFA_CLK_ENABLE_VLV | |
| 5223 | DPLL_VGA_MODE_DIS | DPLL_INTEGRATED_CLOCK_VLV; |
| 5224 | /* We should never disable this, set it here for state tracking */ |
| 5225 | if (pipe == PIPE_B) |
| 5226 | dpll |= DPLL_INTEGRATED_CRI_CLK_VLV; |
| 5227 | dpll |= DPLL_VCO_ENABLE; |
| 5228 | crtc->config.dpll_hw_state.dpll = dpll; |
| 5229 | |
| 5230 | dpll_md = (crtc->config.pixel_multiplier - 1) |
| 5231 | << DPLL_MD_UDI_MULTIPLIER_SHIFT; |
| 5232 | crtc->config.dpll_hw_state.dpll_md = dpll_md; |
| 5233 | |
| 5234 | if (crtc->config.has_dp_encoder) |
| 5235 | intel_dp_set_m_n(crtc); |
| 5236 | |
| 5237 | mutex_unlock(&dev_priv->dpio_lock); |
| 5238 | } |
| 5239 | |
| 5240 | static void i9xx_update_pll(struct intel_crtc *crtc, |
| 5241 | intel_clock_t *reduced_clock, |
| 5242 | int num_connectors) |
| 5243 | { |
| 5244 | struct drm_device *dev = crtc->base.dev; |
| 5245 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 5246 | u32 dpll; |
| 5247 | bool is_sdvo; |
| 5248 | struct dpll *clock = &crtc->config.dpll; |
| 5249 | |
| 5250 | i9xx_update_pll_dividers(crtc, reduced_clock); |
| 5251 | |
| 5252 | is_sdvo = intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_SDVO) || |
| 5253 | intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_HDMI); |
| 5254 | |
| 5255 | dpll = DPLL_VGA_MODE_DIS; |
| 5256 | |
| 5257 | if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS)) |
| 5258 | dpll |= DPLLB_MODE_LVDS; |
| 5259 | else |
| 5260 | dpll |= DPLLB_MODE_DAC_SERIAL; |
| 5261 | |
| 5262 | if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) { |
| 5263 | dpll |= (crtc->config.pixel_multiplier - 1) |
| 5264 | << SDVO_MULTIPLIER_SHIFT_HIRES; |
| 5265 | } |
| 5266 | |
| 5267 | if (is_sdvo) |
| 5268 | dpll |= DPLL_SDVO_HIGH_SPEED; |
| 5269 | |
| 5270 | if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DISPLAYPORT)) |
| 5271 | dpll |= DPLL_SDVO_HIGH_SPEED; |
| 5272 | |
| 5273 | /* compute bitmask from p1 value */ |
| 5274 | if (IS_PINEVIEW(dev)) |
| 5275 | dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW; |
| 5276 | else { |
| 5277 | dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT; |
| 5278 | if (IS_G4X(dev) && reduced_clock) |
| 5279 | dpll |= (1 << (reduced_clock->p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT; |
| 5280 | } |
| 5281 | switch (clock->p2) { |
| 5282 | case 5: |
| 5283 | dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5; |
| 5284 | break; |
| 5285 | case 7: |
| 5286 | dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7; |
| 5287 | break; |
| 5288 | case 10: |
| 5289 | dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10; |
| 5290 | break; |
| 5291 | case 14: |
| 5292 | dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14; |
| 5293 | break; |
| 5294 | } |
| 5295 | if (INTEL_INFO(dev)->gen >= 4) |
| 5296 | dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT); |
| 5297 | |
| 5298 | if (crtc->config.sdvo_tv_clock) |
| 5299 | dpll |= PLL_REF_INPUT_TVCLKINBC; |
| 5300 | else if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) && |
| 5301 | intel_panel_use_ssc(dev_priv) && num_connectors < 2) |
| 5302 | dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN; |
| 5303 | else |
| 5304 | dpll |= PLL_REF_INPUT_DREFCLK; |
| 5305 | |
| 5306 | dpll |= DPLL_VCO_ENABLE; |
| 5307 | crtc->config.dpll_hw_state.dpll = dpll; |
| 5308 | |
| 5309 | if (INTEL_INFO(dev)->gen >= 4) { |
| 5310 | u32 dpll_md = (crtc->config.pixel_multiplier - 1) |
| 5311 | << DPLL_MD_UDI_MULTIPLIER_SHIFT; |
| 5312 | crtc->config.dpll_hw_state.dpll_md = dpll_md; |
| 5313 | } |
| 5314 | |
| 5315 | if (crtc->config.has_dp_encoder) |
| 5316 | intel_dp_set_m_n(crtc); |
| 5317 | } |
| 5318 | |
| 5319 | static void i8xx_update_pll(struct intel_crtc *crtc, |
| 5320 | intel_clock_t *reduced_clock, |
| 5321 | int num_connectors) |
| 5322 | { |
| 5323 | struct drm_device *dev = crtc->base.dev; |
| 5324 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 5325 | u32 dpll; |
| 5326 | struct dpll *clock = &crtc->config.dpll; |
| 5327 | |
| 5328 | i9xx_update_pll_dividers(crtc, reduced_clock); |
| 5329 | |
| 5330 | dpll = DPLL_VGA_MODE_DIS; |
| 5331 | |
| 5332 | if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS)) { |
| 5333 | dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT; |
| 5334 | } else { |
| 5335 | if (clock->p1 == 2) |
| 5336 | dpll |= PLL_P1_DIVIDE_BY_TWO; |
| 5337 | else |
| 5338 | dpll |= (clock->p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT; |
| 5339 | if (clock->p2 == 4) |
| 5340 | dpll |= PLL_P2_DIVIDE_BY_4; |
| 5341 | } |
| 5342 | |
| 5343 | if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DVO)) |
| 5344 | dpll |= DPLL_DVO_2X_MODE; |
| 5345 | |
| 5346 | if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) && |
| 5347 | intel_panel_use_ssc(dev_priv) && num_connectors < 2) |
| 5348 | dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN; |
| 5349 | else |
| 5350 | dpll |= PLL_REF_INPUT_DREFCLK; |
| 5351 | |
| 5352 | dpll |= DPLL_VCO_ENABLE; |
| 5353 | crtc->config.dpll_hw_state.dpll = dpll; |
| 5354 | } |
| 5355 | |
| 5356 | static void intel_set_pipe_timings(struct intel_crtc *intel_crtc) |
| 5357 | { |
| 5358 | struct drm_device *dev = intel_crtc->base.dev; |
| 5359 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 5360 | enum pipe pipe = intel_crtc->pipe; |
| 5361 | enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder; |
| 5362 | struct drm_display_mode *adjusted_mode = |
| 5363 | &intel_crtc->config.adjusted_mode; |
| 5364 | uint32_t vsyncshift, crtc_vtotal, crtc_vblank_end; |
| 5365 | |
| 5366 | /* We need to be careful not to changed the adjusted mode, for otherwise |
| 5367 | * the hw state checker will get angry at the mismatch. */ |
| 5368 | crtc_vtotal = adjusted_mode->crtc_vtotal; |
| 5369 | crtc_vblank_end = adjusted_mode->crtc_vblank_end; |
| 5370 | |
| 5371 | if (!IS_GEN2(dev) && adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) { |
| 5372 | /* the chip adds 2 halflines automatically */ |
| 5373 | crtc_vtotal -= 1; |
| 5374 | crtc_vblank_end -= 1; |
| 5375 | vsyncshift = adjusted_mode->crtc_hsync_start |
| 5376 | - adjusted_mode->crtc_htotal / 2; |
| 5377 | } else { |
| 5378 | vsyncshift = 0; |
| 5379 | } |
| 5380 | |
| 5381 | if (INTEL_INFO(dev)->gen > 3) |
| 5382 | I915_WRITE(VSYNCSHIFT(cpu_transcoder), vsyncshift); |
| 5383 | |
| 5384 | I915_WRITE(HTOTAL(cpu_transcoder), |
| 5385 | (adjusted_mode->crtc_hdisplay - 1) | |
| 5386 | ((adjusted_mode->crtc_htotal - 1) << 16)); |
| 5387 | I915_WRITE(HBLANK(cpu_transcoder), |
| 5388 | (adjusted_mode->crtc_hblank_start - 1) | |
| 5389 | ((adjusted_mode->crtc_hblank_end - 1) << 16)); |
| 5390 | I915_WRITE(HSYNC(cpu_transcoder), |
| 5391 | (adjusted_mode->crtc_hsync_start - 1) | |
| 5392 | ((adjusted_mode->crtc_hsync_end - 1) << 16)); |
| 5393 | |
| 5394 | I915_WRITE(VTOTAL(cpu_transcoder), |
| 5395 | (adjusted_mode->crtc_vdisplay - 1) | |
| 5396 | ((crtc_vtotal - 1) << 16)); |
| 5397 | I915_WRITE(VBLANK(cpu_transcoder), |
| 5398 | (adjusted_mode->crtc_vblank_start - 1) | |
| 5399 | ((crtc_vblank_end - 1) << 16)); |
| 5400 | I915_WRITE(VSYNC(cpu_transcoder), |
| 5401 | (adjusted_mode->crtc_vsync_start - 1) | |
| 5402 | ((adjusted_mode->crtc_vsync_end - 1) << 16)); |
| 5403 | |
| 5404 | /* Workaround: when the EDP input selection is B, the VTOTAL_B must be |
| 5405 | * programmed with the VTOTAL_EDP value. Same for VTOTAL_C. This is |
| 5406 | * documented on the DDI_FUNC_CTL register description, EDP Input Select |
| 5407 | * bits. */ |
| 5408 | if (IS_HASWELL(dev) && cpu_transcoder == TRANSCODER_EDP && |
| 5409 | (pipe == PIPE_B || pipe == PIPE_C)) |
| 5410 | I915_WRITE(VTOTAL(pipe), I915_READ(VTOTAL(cpu_transcoder))); |
| 5411 | |
| 5412 | /* pipesrc controls the size that is scaled from, which should |
| 5413 | * always be the user's requested size. |
| 5414 | */ |
| 5415 | I915_WRITE(PIPESRC(pipe), |
| 5416 | ((intel_crtc->config.pipe_src_w - 1) << 16) | |
| 5417 | (intel_crtc->config.pipe_src_h - 1)); |
| 5418 | } |
| 5419 | |
| 5420 | static void intel_get_pipe_timings(struct intel_crtc *crtc, |
| 5421 | struct intel_crtc_config *pipe_config) |
| 5422 | { |
| 5423 | struct drm_device *dev = crtc->base.dev; |
| 5424 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 5425 | enum transcoder cpu_transcoder = pipe_config->cpu_transcoder; |
| 5426 | uint32_t tmp; |
| 5427 | |
| 5428 | tmp = I915_READ(HTOTAL(cpu_transcoder)); |
| 5429 | pipe_config->adjusted_mode.crtc_hdisplay = (tmp & 0xffff) + 1; |
| 5430 | pipe_config->adjusted_mode.crtc_htotal = ((tmp >> 16) & 0xffff) + 1; |
| 5431 | tmp = I915_READ(HBLANK(cpu_transcoder)); |
| 5432 | pipe_config->adjusted_mode.crtc_hblank_start = (tmp & 0xffff) + 1; |
| 5433 | pipe_config->adjusted_mode.crtc_hblank_end = ((tmp >> 16) & 0xffff) + 1; |
| 5434 | tmp = I915_READ(HSYNC(cpu_transcoder)); |
| 5435 | pipe_config->adjusted_mode.crtc_hsync_start = (tmp & 0xffff) + 1; |
| 5436 | pipe_config->adjusted_mode.crtc_hsync_end = ((tmp >> 16) & 0xffff) + 1; |
| 5437 | |
| 5438 | tmp = I915_READ(VTOTAL(cpu_transcoder)); |
| 5439 | pipe_config->adjusted_mode.crtc_vdisplay = (tmp & 0xffff) + 1; |
| 5440 | pipe_config->adjusted_mode.crtc_vtotal = ((tmp >> 16) & 0xffff) + 1; |
| 5441 | tmp = I915_READ(VBLANK(cpu_transcoder)); |
| 5442 | pipe_config->adjusted_mode.crtc_vblank_start = (tmp & 0xffff) + 1; |
| 5443 | pipe_config->adjusted_mode.crtc_vblank_end = ((tmp >> 16) & 0xffff) + 1; |
| 5444 | tmp = I915_READ(VSYNC(cpu_transcoder)); |
| 5445 | pipe_config->adjusted_mode.crtc_vsync_start = (tmp & 0xffff) + 1; |
| 5446 | pipe_config->adjusted_mode.crtc_vsync_end = ((tmp >> 16) & 0xffff) + 1; |
| 5447 | |
| 5448 | if (I915_READ(PIPECONF(cpu_transcoder)) & PIPECONF_INTERLACE_MASK) { |
| 5449 | pipe_config->adjusted_mode.flags |= DRM_MODE_FLAG_INTERLACE; |
| 5450 | pipe_config->adjusted_mode.crtc_vtotal += 1; |
| 5451 | pipe_config->adjusted_mode.crtc_vblank_end += 1; |
| 5452 | } |
| 5453 | |
| 5454 | tmp = I915_READ(PIPESRC(crtc->pipe)); |
| 5455 | pipe_config->pipe_src_h = (tmp & 0xffff) + 1; |
| 5456 | pipe_config->pipe_src_w = ((tmp >> 16) & 0xffff) + 1; |
| 5457 | |
| 5458 | pipe_config->requested_mode.vdisplay = pipe_config->pipe_src_h; |
| 5459 | pipe_config->requested_mode.hdisplay = pipe_config->pipe_src_w; |
| 5460 | } |
| 5461 | |
| 5462 | void intel_mode_from_pipe_config(struct drm_display_mode *mode, |
| 5463 | struct intel_crtc_config *pipe_config) |
| 5464 | { |
| 5465 | mode->hdisplay = pipe_config->adjusted_mode.crtc_hdisplay; |
| 5466 | mode->htotal = pipe_config->adjusted_mode.crtc_htotal; |
| 5467 | mode->hsync_start = pipe_config->adjusted_mode.crtc_hsync_start; |
| 5468 | mode->hsync_end = pipe_config->adjusted_mode.crtc_hsync_end; |
| 5469 | |
| 5470 | mode->vdisplay = pipe_config->adjusted_mode.crtc_vdisplay; |
| 5471 | mode->vtotal = pipe_config->adjusted_mode.crtc_vtotal; |
| 5472 | mode->vsync_start = pipe_config->adjusted_mode.crtc_vsync_start; |
| 5473 | mode->vsync_end = pipe_config->adjusted_mode.crtc_vsync_end; |
| 5474 | |
| 5475 | mode->flags = pipe_config->adjusted_mode.flags; |
| 5476 | |
| 5477 | mode->clock = pipe_config->adjusted_mode.crtc_clock; |
| 5478 | mode->flags |= pipe_config->adjusted_mode.flags; |
| 5479 | } |
| 5480 | |
| 5481 | static void i9xx_set_pipeconf(struct intel_crtc *intel_crtc) |
| 5482 | { |
| 5483 | struct drm_device *dev = intel_crtc->base.dev; |
| 5484 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 5485 | uint32_t pipeconf; |
| 5486 | |
| 5487 | pipeconf = 0; |
| 5488 | |
| 5489 | if (dev_priv->quirks & QUIRK_PIPEA_FORCE && |
| 5490 | I915_READ(PIPECONF(intel_crtc->pipe)) & PIPECONF_ENABLE) |
| 5491 | pipeconf |= PIPECONF_ENABLE; |
| 5492 | |
| 5493 | if (intel_crtc->config.double_wide) |
| 5494 | pipeconf |= PIPECONF_DOUBLE_WIDE; |
| 5495 | |
| 5496 | /* only g4x and later have fancy bpc/dither controls */ |
| 5497 | if (IS_G4X(dev) || IS_VALLEYVIEW(dev)) { |
| 5498 | /* Bspec claims that we can't use dithering for 30bpp pipes. */ |
| 5499 | if (intel_crtc->config.dither && intel_crtc->config.pipe_bpp != 30) |
| 5500 | pipeconf |= PIPECONF_DITHER_EN | |
| 5501 | PIPECONF_DITHER_TYPE_SP; |
| 5502 | |
| 5503 | switch (intel_crtc->config.pipe_bpp) { |
| 5504 | case 18: |
| 5505 | pipeconf |= PIPECONF_6BPC; |
| 5506 | break; |
| 5507 | case 24: |
| 5508 | pipeconf |= PIPECONF_8BPC; |
| 5509 | break; |
| 5510 | case 30: |
| 5511 | pipeconf |= PIPECONF_10BPC; |
| 5512 | break; |
| 5513 | default: |
| 5514 | /* Case prevented by intel_choose_pipe_bpp_dither. */ |
| 5515 | BUG(); |
| 5516 | } |
| 5517 | } |
| 5518 | |
| 5519 | if (HAS_PIPE_CXSR(dev)) { |
| 5520 | if (intel_crtc->lowfreq_avail) { |
| 5521 | DRM_DEBUG_KMS("enabling CxSR downclocking\n"); |
| 5522 | pipeconf |= PIPECONF_CXSR_DOWNCLOCK; |
| 5523 | } else { |
| 5524 | DRM_DEBUG_KMS("disabling CxSR downclocking\n"); |
| 5525 | } |
| 5526 | } |
| 5527 | |
| 5528 | if (!IS_GEN2(dev) && |
| 5529 | intel_crtc->config.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE) |
| 5530 | pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION; |
| 5531 | else |
| 5532 | pipeconf |= PIPECONF_PROGRESSIVE; |
| 5533 | |
| 5534 | if (IS_VALLEYVIEW(dev) && intel_crtc->config.limited_color_range) |
| 5535 | pipeconf |= PIPECONF_COLOR_RANGE_SELECT; |
| 5536 | |
| 5537 | I915_WRITE(PIPECONF(intel_crtc->pipe), pipeconf); |
| 5538 | POSTING_READ(PIPECONF(intel_crtc->pipe)); |
| 5539 | } |
| 5540 | |
| 5541 | static int i9xx_crtc_mode_set(struct drm_crtc *crtc, |
| 5542 | int x, int y, |
| 5543 | struct drm_framebuffer *fb) |
| 5544 | { |
| 5545 | struct drm_device *dev = crtc->dev; |
| 5546 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 5547 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 5548 | int pipe = intel_crtc->pipe; |
| 5549 | int plane = intel_crtc->plane; |
| 5550 | int refclk, num_connectors = 0; |
| 5551 | intel_clock_t clock, reduced_clock; |
| 5552 | u32 dspcntr; |
| 5553 | bool ok, has_reduced_clock = false; |
| 5554 | bool is_lvds = false, is_dsi = false; |
| 5555 | struct intel_encoder *encoder; |
| 5556 | const intel_limit_t *limit; |
| 5557 | int ret; |
| 5558 | |
| 5559 | for_each_encoder_on_crtc(dev, crtc, encoder) { |
| 5560 | switch (encoder->type) { |
| 5561 | case INTEL_OUTPUT_LVDS: |
| 5562 | is_lvds = true; |
| 5563 | break; |
| 5564 | case INTEL_OUTPUT_DSI: |
| 5565 | is_dsi = true; |
| 5566 | break; |
| 5567 | } |
| 5568 | |
| 5569 | num_connectors++; |
| 5570 | } |
| 5571 | |
| 5572 | if (is_dsi) |
| 5573 | goto skip_dpll; |
| 5574 | |
| 5575 | if (!intel_crtc->config.clock_set) { |
| 5576 | refclk = i9xx_get_refclk(crtc, num_connectors); |
| 5577 | |
| 5578 | /* |
| 5579 | * Returns a set of divisors for the desired target clock with |
| 5580 | * the given refclk, or FALSE. The returned values represent |
| 5581 | * the clock equation: reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + |
| 5582 | * 2) / p1 / p2. |
| 5583 | */ |
| 5584 | limit = intel_limit(crtc, refclk); |
| 5585 | ok = dev_priv->display.find_dpll(limit, crtc, |
| 5586 | intel_crtc->config.port_clock, |
| 5587 | refclk, NULL, &clock); |
| 5588 | if (!ok) { |
| 5589 | DRM_ERROR("Couldn't find PLL settings for mode!\n"); |
| 5590 | return -EINVAL; |
| 5591 | } |
| 5592 | |
| 5593 | if (is_lvds && dev_priv->lvds_downclock_avail) { |
| 5594 | /* |
| 5595 | * Ensure we match the reduced clock's P to the target |
| 5596 | * clock. If the clocks don't match, we can't switch |
| 5597 | * the display clock by using the FP0/FP1. In such case |
| 5598 | * we will disable the LVDS downclock feature. |
| 5599 | */ |
| 5600 | has_reduced_clock = |
| 5601 | dev_priv->display.find_dpll(limit, crtc, |
| 5602 | dev_priv->lvds_downclock, |
| 5603 | refclk, &clock, |
| 5604 | &reduced_clock); |
| 5605 | } |
| 5606 | /* Compat-code for transition, will disappear. */ |
| 5607 | intel_crtc->config.dpll.n = clock.n; |
| 5608 | intel_crtc->config.dpll.m1 = clock.m1; |
| 5609 | intel_crtc->config.dpll.m2 = clock.m2; |
| 5610 | intel_crtc->config.dpll.p1 = clock.p1; |
| 5611 | intel_crtc->config.dpll.p2 = clock.p2; |
| 5612 | } |
| 5613 | |
| 5614 | if (IS_GEN2(dev)) { |
| 5615 | i8xx_update_pll(intel_crtc, |
| 5616 | has_reduced_clock ? &reduced_clock : NULL, |
| 5617 | num_connectors); |
| 5618 | } else if (IS_VALLEYVIEW(dev)) { |
| 5619 | vlv_update_pll(intel_crtc); |
| 5620 | } else { |
| 5621 | i9xx_update_pll(intel_crtc, |
| 5622 | has_reduced_clock ? &reduced_clock : NULL, |
| 5623 | num_connectors); |
| 5624 | } |
| 5625 | |
| 5626 | skip_dpll: |
| 5627 | /* Set up the display plane register */ |
| 5628 | dspcntr = DISPPLANE_GAMMA_ENABLE; |
| 5629 | |
| 5630 | if (!IS_VALLEYVIEW(dev)) { |
| 5631 | if (pipe == 0) |
| 5632 | dspcntr &= ~DISPPLANE_SEL_PIPE_MASK; |
| 5633 | else |
| 5634 | dspcntr |= DISPPLANE_SEL_PIPE_B; |
| 5635 | } |
| 5636 | |
| 5637 | intel_set_pipe_timings(intel_crtc); |
| 5638 | |
| 5639 | /* pipesrc and dspsize control the size that is scaled from, |
| 5640 | * which should always be the user's requested size. |
| 5641 | */ |
| 5642 | I915_WRITE(DSPSIZE(plane), |
| 5643 | ((intel_crtc->config.pipe_src_h - 1) << 16) | |
| 5644 | (intel_crtc->config.pipe_src_w - 1)); |
| 5645 | I915_WRITE(DSPPOS(plane), 0); |
| 5646 | |
| 5647 | i9xx_set_pipeconf(intel_crtc); |
| 5648 | |
| 5649 | I915_WRITE(DSPCNTR(plane), dspcntr); |
| 5650 | POSTING_READ(DSPCNTR(plane)); |
| 5651 | |
| 5652 | ret = intel_pipe_set_base(crtc, x, y, fb); |
| 5653 | |
| 5654 | return ret; |
| 5655 | } |
| 5656 | |
| 5657 | static void i9xx_get_pfit_config(struct intel_crtc *crtc, |
| 5658 | struct intel_crtc_config *pipe_config) |
| 5659 | { |
| 5660 | struct drm_device *dev = crtc->base.dev; |
| 5661 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 5662 | uint32_t tmp; |
| 5663 | |
| 5664 | if (INTEL_INFO(dev)->gen <= 3 && (IS_I830(dev) || !IS_MOBILE(dev))) |
| 5665 | return; |
| 5666 | |
| 5667 | tmp = I915_READ(PFIT_CONTROL); |
| 5668 | if (!(tmp & PFIT_ENABLE)) |
| 5669 | return; |
| 5670 | |
| 5671 | /* Check whether the pfit is attached to our pipe. */ |
| 5672 | if (INTEL_INFO(dev)->gen < 4) { |
| 5673 | if (crtc->pipe != PIPE_B) |
| 5674 | return; |
| 5675 | } else { |
| 5676 | if ((tmp & PFIT_PIPE_MASK) != (crtc->pipe << PFIT_PIPE_SHIFT)) |
| 5677 | return; |
| 5678 | } |
| 5679 | |
| 5680 | pipe_config->gmch_pfit.control = tmp; |
| 5681 | pipe_config->gmch_pfit.pgm_ratios = I915_READ(PFIT_PGM_RATIOS); |
| 5682 | if (INTEL_INFO(dev)->gen < 5) |
| 5683 | pipe_config->gmch_pfit.lvds_border_bits = |
| 5684 | I915_READ(LVDS) & LVDS_BORDER_ENABLE; |
| 5685 | } |
| 5686 | |
| 5687 | static void vlv_crtc_clock_get(struct intel_crtc *crtc, |
| 5688 | struct intel_crtc_config *pipe_config) |
| 5689 | { |
| 5690 | struct drm_device *dev = crtc->base.dev; |
| 5691 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 5692 | int pipe = pipe_config->cpu_transcoder; |
| 5693 | intel_clock_t clock; |
| 5694 | u32 mdiv; |
| 5695 | int refclk = 100000; |
| 5696 | |
| 5697 | mutex_lock(&dev_priv->dpio_lock); |
| 5698 | mdiv = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW3(pipe)); |
| 5699 | mutex_unlock(&dev_priv->dpio_lock); |
| 5700 | |
| 5701 | clock.m1 = (mdiv >> DPIO_M1DIV_SHIFT) & 7; |
| 5702 | clock.m2 = mdiv & DPIO_M2DIV_MASK; |
| 5703 | clock.n = (mdiv >> DPIO_N_SHIFT) & 0xf; |
| 5704 | clock.p1 = (mdiv >> DPIO_P1_SHIFT) & 7; |
| 5705 | clock.p2 = (mdiv >> DPIO_P2_SHIFT) & 0x1f; |
| 5706 | |
| 5707 | vlv_clock(refclk, &clock); |
| 5708 | |
| 5709 | /* clock.dot is the fast clock */ |
| 5710 | pipe_config->port_clock = clock.dot / 5; |
| 5711 | } |
| 5712 | |
| 5713 | static void i9xx_get_plane_config(struct intel_crtc *crtc, |
| 5714 | struct intel_plane_config *plane_config) |
| 5715 | { |
| 5716 | struct drm_device *dev = crtc->base.dev; |
| 5717 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 5718 | u32 val, base, offset; |
| 5719 | int pipe = crtc->pipe, plane = crtc->plane; |
| 5720 | int fourcc, pixel_format; |
| 5721 | int aligned_height; |
| 5722 | |
| 5723 | crtc->base.fb = kzalloc(sizeof(struct intel_framebuffer), GFP_KERNEL); |
| 5724 | if (!crtc->base.fb) { |
| 5725 | DRM_DEBUG_KMS("failed to alloc fb\n"); |
| 5726 | return; |
| 5727 | } |
| 5728 | |
| 5729 | val = I915_READ(DSPCNTR(plane)); |
| 5730 | |
| 5731 | if (INTEL_INFO(dev)->gen >= 4) |
| 5732 | if (val & DISPPLANE_TILED) |
| 5733 | plane_config->tiled = true; |
| 5734 | |
| 5735 | pixel_format = val & DISPPLANE_PIXFORMAT_MASK; |
| 5736 | fourcc = intel_format_to_fourcc(pixel_format); |
| 5737 | crtc->base.fb->pixel_format = fourcc; |
| 5738 | crtc->base.fb->bits_per_pixel = |
| 5739 | drm_format_plane_cpp(fourcc, 0) * 8; |
| 5740 | |
| 5741 | if (INTEL_INFO(dev)->gen >= 4) { |
| 5742 | if (plane_config->tiled) |
| 5743 | offset = I915_READ(DSPTILEOFF(plane)); |
| 5744 | else |
| 5745 | offset = I915_READ(DSPLINOFF(plane)); |
| 5746 | base = I915_READ(DSPSURF(plane)) & 0xfffff000; |
| 5747 | } else { |
| 5748 | base = I915_READ(DSPADDR(plane)); |
| 5749 | } |
| 5750 | plane_config->base = base; |
| 5751 | |
| 5752 | val = I915_READ(PIPESRC(pipe)); |
| 5753 | crtc->base.fb->width = ((val >> 16) & 0xfff) + 1; |
| 5754 | crtc->base.fb->height = ((val >> 0) & 0xfff) + 1; |
| 5755 | |
| 5756 | val = I915_READ(DSPSTRIDE(pipe)); |
| 5757 | crtc->base.fb->pitches[0] = val & 0xffffff80; |
| 5758 | |
| 5759 | aligned_height = intel_align_height(dev, crtc->base.fb->height, |
| 5760 | plane_config->tiled); |
| 5761 | |
| 5762 | plane_config->size = ALIGN(crtc->base.fb->pitches[0] * |
| 5763 | aligned_height, PAGE_SIZE); |
| 5764 | |
| 5765 | DRM_DEBUG_KMS("pipe/plane %d/%d with fb: size=%dx%d@%d, offset=%x, pitch %d, size 0x%x\n", |
| 5766 | pipe, plane, crtc->base.fb->width, |
| 5767 | crtc->base.fb->height, |
| 5768 | crtc->base.fb->bits_per_pixel, base, |
| 5769 | crtc->base.fb->pitches[0], |
| 5770 | plane_config->size); |
| 5771 | |
| 5772 | } |
| 5773 | |
| 5774 | static bool i9xx_get_pipe_config(struct intel_crtc *crtc, |
| 5775 | struct intel_crtc_config *pipe_config) |
| 5776 | { |
| 5777 | struct drm_device *dev = crtc->base.dev; |
| 5778 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 5779 | uint32_t tmp; |
| 5780 | |
| 5781 | if (!intel_display_power_enabled(dev_priv, |
| 5782 | POWER_DOMAIN_PIPE(crtc->pipe))) |
| 5783 | return false; |
| 5784 | |
| 5785 | pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe; |
| 5786 | pipe_config->shared_dpll = DPLL_ID_PRIVATE; |
| 5787 | |
| 5788 | tmp = I915_READ(PIPECONF(crtc->pipe)); |
| 5789 | if (!(tmp & PIPECONF_ENABLE)) |
| 5790 | return false; |
| 5791 | |
| 5792 | if (IS_G4X(dev) || IS_VALLEYVIEW(dev)) { |
| 5793 | switch (tmp & PIPECONF_BPC_MASK) { |
| 5794 | case PIPECONF_6BPC: |
| 5795 | pipe_config->pipe_bpp = 18; |
| 5796 | break; |
| 5797 | case PIPECONF_8BPC: |
| 5798 | pipe_config->pipe_bpp = 24; |
| 5799 | break; |
| 5800 | case PIPECONF_10BPC: |
| 5801 | pipe_config->pipe_bpp = 30; |
| 5802 | break; |
| 5803 | default: |
| 5804 | break; |
| 5805 | } |
| 5806 | } |
| 5807 | |
| 5808 | if (INTEL_INFO(dev)->gen < 4) |
| 5809 | pipe_config->double_wide = tmp & PIPECONF_DOUBLE_WIDE; |
| 5810 | |
| 5811 | intel_get_pipe_timings(crtc, pipe_config); |
| 5812 | |
| 5813 | i9xx_get_pfit_config(crtc, pipe_config); |
| 5814 | |
| 5815 | if (INTEL_INFO(dev)->gen >= 4) { |
| 5816 | tmp = I915_READ(DPLL_MD(crtc->pipe)); |
| 5817 | pipe_config->pixel_multiplier = |
| 5818 | ((tmp & DPLL_MD_UDI_MULTIPLIER_MASK) |
| 5819 | >> DPLL_MD_UDI_MULTIPLIER_SHIFT) + 1; |
| 5820 | pipe_config->dpll_hw_state.dpll_md = tmp; |
| 5821 | } else if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) { |
| 5822 | tmp = I915_READ(DPLL(crtc->pipe)); |
| 5823 | pipe_config->pixel_multiplier = |
| 5824 | ((tmp & SDVO_MULTIPLIER_MASK) |
| 5825 | >> SDVO_MULTIPLIER_SHIFT_HIRES) + 1; |
| 5826 | } else { |
| 5827 | /* Note that on i915G/GM the pixel multiplier is in the sdvo |
| 5828 | * port and will be fixed up in the encoder->get_config |
| 5829 | * function. */ |
| 5830 | pipe_config->pixel_multiplier = 1; |
| 5831 | } |
| 5832 | pipe_config->dpll_hw_state.dpll = I915_READ(DPLL(crtc->pipe)); |
| 5833 | if (!IS_VALLEYVIEW(dev)) { |
| 5834 | pipe_config->dpll_hw_state.fp0 = I915_READ(FP0(crtc->pipe)); |
| 5835 | pipe_config->dpll_hw_state.fp1 = I915_READ(FP1(crtc->pipe)); |
| 5836 | } else { |
| 5837 | /* Mask out read-only status bits. */ |
| 5838 | pipe_config->dpll_hw_state.dpll &= ~(DPLL_LOCK_VLV | |
| 5839 | DPLL_PORTC_READY_MASK | |
| 5840 | DPLL_PORTB_READY_MASK); |
| 5841 | } |
| 5842 | |
| 5843 | if (IS_VALLEYVIEW(dev)) |
| 5844 | vlv_crtc_clock_get(crtc, pipe_config); |
| 5845 | else |
| 5846 | i9xx_crtc_clock_get(crtc, pipe_config); |
| 5847 | |
| 5848 | return true; |
| 5849 | } |
| 5850 | |
| 5851 | static void ironlake_init_pch_refclk(struct drm_device *dev) |
| 5852 | { |
| 5853 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 5854 | struct drm_mode_config *mode_config = &dev->mode_config; |
| 5855 | struct intel_encoder *encoder; |
| 5856 | u32 val, final; |
| 5857 | bool has_lvds = false; |
| 5858 | bool has_cpu_edp = false; |
| 5859 | bool has_panel = false; |
| 5860 | bool has_ck505 = false; |
| 5861 | bool can_ssc = false; |
| 5862 | |
| 5863 | /* We need to take the global config into account */ |
| 5864 | list_for_each_entry(encoder, &mode_config->encoder_list, |
| 5865 | base.head) { |
| 5866 | switch (encoder->type) { |
| 5867 | case INTEL_OUTPUT_LVDS: |
| 5868 | has_panel = true; |
| 5869 | has_lvds = true; |
| 5870 | break; |
| 5871 | case INTEL_OUTPUT_EDP: |
| 5872 | has_panel = true; |
| 5873 | if (enc_to_dig_port(&encoder->base)->port == PORT_A) |
| 5874 | has_cpu_edp = true; |
| 5875 | break; |
| 5876 | } |
| 5877 | } |
| 5878 | |
| 5879 | if (HAS_PCH_IBX(dev)) { |
| 5880 | has_ck505 = dev_priv->vbt.display_clock_mode; |
| 5881 | can_ssc = has_ck505; |
| 5882 | } else { |
| 5883 | has_ck505 = false; |
| 5884 | can_ssc = true; |
| 5885 | } |
| 5886 | |
| 5887 | DRM_DEBUG_KMS("has_panel %d has_lvds %d has_ck505 %d\n", |
| 5888 | has_panel, has_lvds, has_ck505); |
| 5889 | |
| 5890 | /* Ironlake: try to setup display ref clock before DPLL |
| 5891 | * enabling. This is only under driver's control after |
| 5892 | * PCH B stepping, previous chipset stepping should be |
| 5893 | * ignoring this setting. |
| 5894 | */ |
| 5895 | val = I915_READ(PCH_DREF_CONTROL); |
| 5896 | |
| 5897 | /* As we must carefully and slowly disable/enable each source in turn, |
| 5898 | * compute the final state we want first and check if we need to |
| 5899 | * make any changes at all. |
| 5900 | */ |
| 5901 | final = val; |
| 5902 | final &= ~DREF_NONSPREAD_SOURCE_MASK; |
| 5903 | if (has_ck505) |
| 5904 | final |= DREF_NONSPREAD_CK505_ENABLE; |
| 5905 | else |
| 5906 | final |= DREF_NONSPREAD_SOURCE_ENABLE; |
| 5907 | |
| 5908 | final &= ~DREF_SSC_SOURCE_MASK; |
| 5909 | final &= ~DREF_CPU_SOURCE_OUTPUT_MASK; |
| 5910 | final &= ~DREF_SSC1_ENABLE; |
| 5911 | |
| 5912 | if (has_panel) { |
| 5913 | final |= DREF_SSC_SOURCE_ENABLE; |
| 5914 | |
| 5915 | if (intel_panel_use_ssc(dev_priv) && can_ssc) |
| 5916 | final |= DREF_SSC1_ENABLE; |
| 5917 | |
| 5918 | if (has_cpu_edp) { |
| 5919 | if (intel_panel_use_ssc(dev_priv) && can_ssc) |
| 5920 | final |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD; |
| 5921 | else |
| 5922 | final |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD; |
| 5923 | } else |
| 5924 | final |= DREF_CPU_SOURCE_OUTPUT_DISABLE; |
| 5925 | } else { |
| 5926 | final |= DREF_SSC_SOURCE_DISABLE; |
| 5927 | final |= DREF_CPU_SOURCE_OUTPUT_DISABLE; |
| 5928 | } |
| 5929 | |
| 5930 | if (final == val) |
| 5931 | return; |
| 5932 | |
| 5933 | /* Always enable nonspread source */ |
| 5934 | val &= ~DREF_NONSPREAD_SOURCE_MASK; |
| 5935 | |
| 5936 | if (has_ck505) |
| 5937 | val |= DREF_NONSPREAD_CK505_ENABLE; |
| 5938 | else |
| 5939 | val |= DREF_NONSPREAD_SOURCE_ENABLE; |
| 5940 | |
| 5941 | if (has_panel) { |
| 5942 | val &= ~DREF_SSC_SOURCE_MASK; |
| 5943 | val |= DREF_SSC_SOURCE_ENABLE; |
| 5944 | |
| 5945 | /* SSC must be turned on before enabling the CPU output */ |
| 5946 | if (intel_panel_use_ssc(dev_priv) && can_ssc) { |
| 5947 | DRM_DEBUG_KMS("Using SSC on panel\n"); |
| 5948 | val |= DREF_SSC1_ENABLE; |
| 5949 | } else |
| 5950 | val &= ~DREF_SSC1_ENABLE; |
| 5951 | |
| 5952 | /* Get SSC going before enabling the outputs */ |
| 5953 | I915_WRITE(PCH_DREF_CONTROL, val); |
| 5954 | POSTING_READ(PCH_DREF_CONTROL); |
| 5955 | udelay(200); |
| 5956 | |
| 5957 | val &= ~DREF_CPU_SOURCE_OUTPUT_MASK; |
| 5958 | |
| 5959 | /* Enable CPU source on CPU attached eDP */ |
| 5960 | if (has_cpu_edp) { |
| 5961 | if (intel_panel_use_ssc(dev_priv) && can_ssc) { |
| 5962 | DRM_DEBUG_KMS("Using SSC on eDP\n"); |
| 5963 | val |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD; |
| 5964 | } |
| 5965 | else |
| 5966 | val |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD; |
| 5967 | } else |
| 5968 | val |= DREF_CPU_SOURCE_OUTPUT_DISABLE; |
| 5969 | |
| 5970 | I915_WRITE(PCH_DREF_CONTROL, val); |
| 5971 | POSTING_READ(PCH_DREF_CONTROL); |
| 5972 | udelay(200); |
| 5973 | } else { |
| 5974 | DRM_DEBUG_KMS("Disabling SSC entirely\n"); |
| 5975 | |
| 5976 | val &= ~DREF_CPU_SOURCE_OUTPUT_MASK; |
| 5977 | |
| 5978 | /* Turn off CPU output */ |
| 5979 | val |= DREF_CPU_SOURCE_OUTPUT_DISABLE; |
| 5980 | |
| 5981 | I915_WRITE(PCH_DREF_CONTROL, val); |
| 5982 | POSTING_READ(PCH_DREF_CONTROL); |
| 5983 | udelay(200); |
| 5984 | |
| 5985 | /* Turn off the SSC source */ |
| 5986 | val &= ~DREF_SSC_SOURCE_MASK; |
| 5987 | val |= DREF_SSC_SOURCE_DISABLE; |
| 5988 | |
| 5989 | /* Turn off SSC1 */ |
| 5990 | val &= ~DREF_SSC1_ENABLE; |
| 5991 | |
| 5992 | I915_WRITE(PCH_DREF_CONTROL, val); |
| 5993 | POSTING_READ(PCH_DREF_CONTROL); |
| 5994 | udelay(200); |
| 5995 | } |
| 5996 | |
| 5997 | BUG_ON(val != final); |
| 5998 | } |
| 5999 | |
| 6000 | static void lpt_reset_fdi_mphy(struct drm_i915_private *dev_priv) |
| 6001 | { |
| 6002 | uint32_t tmp; |
| 6003 | |
| 6004 | tmp = I915_READ(SOUTH_CHICKEN2); |
| 6005 | tmp |= FDI_MPHY_IOSFSB_RESET_CTL; |
| 6006 | I915_WRITE(SOUTH_CHICKEN2, tmp); |
| 6007 | |
| 6008 | if (wait_for_atomic_us(I915_READ(SOUTH_CHICKEN2) & |
| 6009 | FDI_MPHY_IOSFSB_RESET_STATUS, 100)) |
| 6010 | DRM_ERROR("FDI mPHY reset assert timeout\n"); |
| 6011 | |
| 6012 | tmp = I915_READ(SOUTH_CHICKEN2); |
| 6013 | tmp &= ~FDI_MPHY_IOSFSB_RESET_CTL; |
| 6014 | I915_WRITE(SOUTH_CHICKEN2, tmp); |
| 6015 | |
| 6016 | if (wait_for_atomic_us((I915_READ(SOUTH_CHICKEN2) & |
| 6017 | FDI_MPHY_IOSFSB_RESET_STATUS) == 0, 100)) |
| 6018 | DRM_ERROR("FDI mPHY reset de-assert timeout\n"); |
| 6019 | } |
| 6020 | |
| 6021 | /* WaMPhyProgramming:hsw */ |
| 6022 | static void lpt_program_fdi_mphy(struct drm_i915_private *dev_priv) |
| 6023 | { |
| 6024 | uint32_t tmp; |
| 6025 | |
| 6026 | tmp = intel_sbi_read(dev_priv, 0x8008, SBI_MPHY); |
| 6027 | tmp &= ~(0xFF << 24); |
| 6028 | tmp |= (0x12 << 24); |
| 6029 | intel_sbi_write(dev_priv, 0x8008, tmp, SBI_MPHY); |
| 6030 | |
| 6031 | tmp = intel_sbi_read(dev_priv, 0x2008, SBI_MPHY); |
| 6032 | tmp |= (1 << 11); |
| 6033 | intel_sbi_write(dev_priv, 0x2008, tmp, SBI_MPHY); |
| 6034 | |
| 6035 | tmp = intel_sbi_read(dev_priv, 0x2108, SBI_MPHY); |
| 6036 | tmp |= (1 << 11); |
| 6037 | intel_sbi_write(dev_priv, 0x2108, tmp, SBI_MPHY); |
| 6038 | |
| 6039 | tmp = intel_sbi_read(dev_priv, 0x206C, SBI_MPHY); |
| 6040 | tmp |= (1 << 24) | (1 << 21) | (1 << 18); |
| 6041 | intel_sbi_write(dev_priv, 0x206C, tmp, SBI_MPHY); |
| 6042 | |
| 6043 | tmp = intel_sbi_read(dev_priv, 0x216C, SBI_MPHY); |
| 6044 | tmp |= (1 << 24) | (1 << 21) | (1 << 18); |
| 6045 | intel_sbi_write(dev_priv, 0x216C, tmp, SBI_MPHY); |
| 6046 | |
| 6047 | tmp = intel_sbi_read(dev_priv, 0x2080, SBI_MPHY); |
| 6048 | tmp &= ~(7 << 13); |
| 6049 | tmp |= (5 << 13); |
| 6050 | intel_sbi_write(dev_priv, 0x2080, tmp, SBI_MPHY); |
| 6051 | |
| 6052 | tmp = intel_sbi_read(dev_priv, 0x2180, SBI_MPHY); |
| 6053 | tmp &= ~(7 << 13); |
| 6054 | tmp |= (5 << 13); |
| 6055 | intel_sbi_write(dev_priv, 0x2180, tmp, SBI_MPHY); |
| 6056 | |
| 6057 | tmp = intel_sbi_read(dev_priv, 0x208C, SBI_MPHY); |
| 6058 | tmp &= ~0xFF; |
| 6059 | tmp |= 0x1C; |
| 6060 | intel_sbi_write(dev_priv, 0x208C, tmp, SBI_MPHY); |
| 6061 | |
| 6062 | tmp = intel_sbi_read(dev_priv, 0x218C, SBI_MPHY); |
| 6063 | tmp &= ~0xFF; |
| 6064 | tmp |= 0x1C; |
| 6065 | intel_sbi_write(dev_priv, 0x218C, tmp, SBI_MPHY); |
| 6066 | |
| 6067 | tmp = intel_sbi_read(dev_priv, 0x2098, SBI_MPHY); |
| 6068 | tmp &= ~(0xFF << 16); |
| 6069 | tmp |= (0x1C << 16); |
| 6070 | intel_sbi_write(dev_priv, 0x2098, tmp, SBI_MPHY); |
| 6071 | |
| 6072 | tmp = intel_sbi_read(dev_priv, 0x2198, SBI_MPHY); |
| 6073 | tmp &= ~(0xFF << 16); |
| 6074 | tmp |= (0x1C << 16); |
| 6075 | intel_sbi_write(dev_priv, 0x2198, tmp, SBI_MPHY); |
| 6076 | |
| 6077 | tmp = intel_sbi_read(dev_priv, 0x20C4, SBI_MPHY); |
| 6078 | tmp |= (1 << 27); |
| 6079 | intel_sbi_write(dev_priv, 0x20C4, tmp, SBI_MPHY); |
| 6080 | |
| 6081 | tmp = intel_sbi_read(dev_priv, 0x21C4, SBI_MPHY); |
| 6082 | tmp |= (1 << 27); |
| 6083 | intel_sbi_write(dev_priv, 0x21C4, tmp, SBI_MPHY); |
| 6084 | |
| 6085 | tmp = intel_sbi_read(dev_priv, 0x20EC, SBI_MPHY); |
| 6086 | tmp &= ~(0xF << 28); |
| 6087 | tmp |= (4 << 28); |
| 6088 | intel_sbi_write(dev_priv, 0x20EC, tmp, SBI_MPHY); |
| 6089 | |
| 6090 | tmp = intel_sbi_read(dev_priv, 0x21EC, SBI_MPHY); |
| 6091 | tmp &= ~(0xF << 28); |
| 6092 | tmp |= (4 << 28); |
| 6093 | intel_sbi_write(dev_priv, 0x21EC, tmp, SBI_MPHY); |
| 6094 | } |
| 6095 | |
| 6096 | /* Implements 3 different sequences from BSpec chapter "Display iCLK |
| 6097 | * Programming" based on the parameters passed: |
| 6098 | * - Sequence to enable CLKOUT_DP |
| 6099 | * - Sequence to enable CLKOUT_DP without spread |
| 6100 | * - Sequence to enable CLKOUT_DP for FDI usage and configure PCH FDI I/O |
| 6101 | */ |
| 6102 | static void lpt_enable_clkout_dp(struct drm_device *dev, bool with_spread, |
| 6103 | bool with_fdi) |
| 6104 | { |
| 6105 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 6106 | uint32_t reg, tmp; |
| 6107 | |
| 6108 | if (WARN(with_fdi && !with_spread, "FDI requires downspread\n")) |
| 6109 | with_spread = true; |
| 6110 | if (WARN(dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE && |
| 6111 | with_fdi, "LP PCH doesn't have FDI\n")) |
| 6112 | with_fdi = false; |
| 6113 | |
| 6114 | mutex_lock(&dev_priv->dpio_lock); |
| 6115 | |
| 6116 | tmp = intel_sbi_read(dev_priv, SBI_SSCCTL, SBI_ICLK); |
| 6117 | tmp &= ~SBI_SSCCTL_DISABLE; |
| 6118 | tmp |= SBI_SSCCTL_PATHALT; |
| 6119 | intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK); |
| 6120 | |
| 6121 | udelay(24); |
| 6122 | |
| 6123 | if (with_spread) { |
| 6124 | tmp = intel_sbi_read(dev_priv, SBI_SSCCTL, SBI_ICLK); |
| 6125 | tmp &= ~SBI_SSCCTL_PATHALT; |
| 6126 | intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK); |
| 6127 | |
| 6128 | if (with_fdi) { |
| 6129 | lpt_reset_fdi_mphy(dev_priv); |
| 6130 | lpt_program_fdi_mphy(dev_priv); |
| 6131 | } |
| 6132 | } |
| 6133 | |
| 6134 | reg = (dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) ? |
| 6135 | SBI_GEN0 : SBI_DBUFF0; |
| 6136 | tmp = intel_sbi_read(dev_priv, reg, SBI_ICLK); |
| 6137 | tmp |= SBI_GEN0_CFG_BUFFENABLE_DISABLE; |
| 6138 | intel_sbi_write(dev_priv, reg, tmp, SBI_ICLK); |
| 6139 | |
| 6140 | mutex_unlock(&dev_priv->dpio_lock); |
| 6141 | } |
| 6142 | |
| 6143 | /* Sequence to disable CLKOUT_DP */ |
| 6144 | static void lpt_disable_clkout_dp(struct drm_device *dev) |
| 6145 | { |
| 6146 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 6147 | uint32_t reg, tmp; |
| 6148 | |
| 6149 | mutex_lock(&dev_priv->dpio_lock); |
| 6150 | |
| 6151 | reg = (dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) ? |
| 6152 | SBI_GEN0 : SBI_DBUFF0; |
| 6153 | tmp = intel_sbi_read(dev_priv, reg, SBI_ICLK); |
| 6154 | tmp &= ~SBI_GEN0_CFG_BUFFENABLE_DISABLE; |
| 6155 | intel_sbi_write(dev_priv, reg, tmp, SBI_ICLK); |
| 6156 | |
| 6157 | tmp = intel_sbi_read(dev_priv, SBI_SSCCTL, SBI_ICLK); |
| 6158 | if (!(tmp & SBI_SSCCTL_DISABLE)) { |
| 6159 | if (!(tmp & SBI_SSCCTL_PATHALT)) { |
| 6160 | tmp |= SBI_SSCCTL_PATHALT; |
| 6161 | intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK); |
| 6162 | udelay(32); |
| 6163 | } |
| 6164 | tmp |= SBI_SSCCTL_DISABLE; |
| 6165 | intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK); |
| 6166 | } |
| 6167 | |
| 6168 | mutex_unlock(&dev_priv->dpio_lock); |
| 6169 | } |
| 6170 | |
| 6171 | static void lpt_init_pch_refclk(struct drm_device *dev) |
| 6172 | { |
| 6173 | struct drm_mode_config *mode_config = &dev->mode_config; |
| 6174 | struct intel_encoder *encoder; |
| 6175 | bool has_vga = false; |
| 6176 | |
| 6177 | list_for_each_entry(encoder, &mode_config->encoder_list, base.head) { |
| 6178 | switch (encoder->type) { |
| 6179 | case INTEL_OUTPUT_ANALOG: |
| 6180 | has_vga = true; |
| 6181 | break; |
| 6182 | } |
| 6183 | } |
| 6184 | |
| 6185 | if (has_vga) |
| 6186 | lpt_enable_clkout_dp(dev, true, true); |
| 6187 | else |
| 6188 | lpt_disable_clkout_dp(dev); |
| 6189 | } |
| 6190 | |
| 6191 | /* |
| 6192 | * Initialize reference clocks when the driver loads |
| 6193 | */ |
| 6194 | void intel_init_pch_refclk(struct drm_device *dev) |
| 6195 | { |
| 6196 | if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) |
| 6197 | ironlake_init_pch_refclk(dev); |
| 6198 | else if (HAS_PCH_LPT(dev)) |
| 6199 | lpt_init_pch_refclk(dev); |
| 6200 | } |
| 6201 | |
| 6202 | static int ironlake_get_refclk(struct drm_crtc *crtc) |
| 6203 | { |
| 6204 | struct drm_device *dev = crtc->dev; |
| 6205 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 6206 | struct intel_encoder *encoder; |
| 6207 | int num_connectors = 0; |
| 6208 | bool is_lvds = false; |
| 6209 | |
| 6210 | for_each_encoder_on_crtc(dev, crtc, encoder) { |
| 6211 | switch (encoder->type) { |
| 6212 | case INTEL_OUTPUT_LVDS: |
| 6213 | is_lvds = true; |
| 6214 | break; |
| 6215 | } |
| 6216 | num_connectors++; |
| 6217 | } |
| 6218 | |
| 6219 | if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2) { |
| 6220 | DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n", |
| 6221 | dev_priv->vbt.lvds_ssc_freq); |
| 6222 | return dev_priv->vbt.lvds_ssc_freq; |
| 6223 | } |
| 6224 | |
| 6225 | return 120000; |
| 6226 | } |
| 6227 | |
| 6228 | static void ironlake_set_pipeconf(struct drm_crtc *crtc) |
| 6229 | { |
| 6230 | struct drm_i915_private *dev_priv = crtc->dev->dev_private; |
| 6231 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 6232 | int pipe = intel_crtc->pipe; |
| 6233 | uint32_t val; |
| 6234 | |
| 6235 | val = 0; |
| 6236 | |
| 6237 | switch (intel_crtc->config.pipe_bpp) { |
| 6238 | case 18: |
| 6239 | val |= PIPECONF_6BPC; |
| 6240 | break; |
| 6241 | case 24: |
| 6242 | val |= PIPECONF_8BPC; |
| 6243 | break; |
| 6244 | case 30: |
| 6245 | val |= PIPECONF_10BPC; |
| 6246 | break; |
| 6247 | case 36: |
| 6248 | val |= PIPECONF_12BPC; |
| 6249 | break; |
| 6250 | default: |
| 6251 | /* Case prevented by intel_choose_pipe_bpp_dither. */ |
| 6252 | BUG(); |
| 6253 | } |
| 6254 | |
| 6255 | if (intel_crtc->config.dither) |
| 6256 | val |= (PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_SP); |
| 6257 | |
| 6258 | if (intel_crtc->config.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE) |
| 6259 | val |= PIPECONF_INTERLACED_ILK; |
| 6260 | else |
| 6261 | val |= PIPECONF_PROGRESSIVE; |
| 6262 | |
| 6263 | if (intel_crtc->config.limited_color_range) |
| 6264 | val |= PIPECONF_COLOR_RANGE_SELECT; |
| 6265 | |
| 6266 | I915_WRITE(PIPECONF(pipe), val); |
| 6267 | POSTING_READ(PIPECONF(pipe)); |
| 6268 | } |
| 6269 | |
| 6270 | /* |
| 6271 | * Set up the pipe CSC unit. |
| 6272 | * |
| 6273 | * Currently only full range RGB to limited range RGB conversion |
| 6274 | * is supported, but eventually this should handle various |
| 6275 | * RGB<->YCbCr scenarios as well. |
| 6276 | */ |
| 6277 | static void intel_set_pipe_csc(struct drm_crtc *crtc) |
| 6278 | { |
| 6279 | struct drm_device *dev = crtc->dev; |
| 6280 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 6281 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 6282 | int pipe = intel_crtc->pipe; |
| 6283 | uint16_t coeff = 0x7800; /* 1.0 */ |
| 6284 | |
| 6285 | /* |
| 6286 | * TODO: Check what kind of values actually come out of the pipe |
| 6287 | * with these coeff/postoff values and adjust to get the best |
| 6288 | * accuracy. Perhaps we even need to take the bpc value into |
| 6289 | * consideration. |
| 6290 | */ |
| 6291 | |
| 6292 | if (intel_crtc->config.limited_color_range) |
| 6293 | coeff = ((235 - 16) * (1 << 12) / 255) & 0xff8; /* 0.xxx... */ |
| 6294 | |
| 6295 | /* |
| 6296 | * GY/GU and RY/RU should be the other way around according |
| 6297 | * to BSpec, but reality doesn't agree. Just set them up in |
| 6298 | * a way that results in the correct picture. |
| 6299 | */ |
| 6300 | I915_WRITE(PIPE_CSC_COEFF_RY_GY(pipe), coeff << 16); |
| 6301 | I915_WRITE(PIPE_CSC_COEFF_BY(pipe), 0); |
| 6302 | |
| 6303 | I915_WRITE(PIPE_CSC_COEFF_RU_GU(pipe), coeff); |
| 6304 | I915_WRITE(PIPE_CSC_COEFF_BU(pipe), 0); |
| 6305 | |
| 6306 | I915_WRITE(PIPE_CSC_COEFF_RV_GV(pipe), 0); |
| 6307 | I915_WRITE(PIPE_CSC_COEFF_BV(pipe), coeff << 16); |
| 6308 | |
| 6309 | I915_WRITE(PIPE_CSC_PREOFF_HI(pipe), 0); |
| 6310 | I915_WRITE(PIPE_CSC_PREOFF_ME(pipe), 0); |
| 6311 | I915_WRITE(PIPE_CSC_PREOFF_LO(pipe), 0); |
| 6312 | |
| 6313 | if (INTEL_INFO(dev)->gen > 6) { |
| 6314 | uint16_t postoff = 0; |
| 6315 | |
| 6316 | if (intel_crtc->config.limited_color_range) |
| 6317 | postoff = (16 * (1 << 12) / 255) & 0x1fff; |
| 6318 | |
| 6319 | I915_WRITE(PIPE_CSC_POSTOFF_HI(pipe), postoff); |
| 6320 | I915_WRITE(PIPE_CSC_POSTOFF_ME(pipe), postoff); |
| 6321 | I915_WRITE(PIPE_CSC_POSTOFF_LO(pipe), postoff); |
| 6322 | |
| 6323 | I915_WRITE(PIPE_CSC_MODE(pipe), 0); |
| 6324 | } else { |
| 6325 | uint32_t mode = CSC_MODE_YUV_TO_RGB; |
| 6326 | |
| 6327 | if (intel_crtc->config.limited_color_range) |
| 6328 | mode |= CSC_BLACK_SCREEN_OFFSET; |
| 6329 | |
| 6330 | I915_WRITE(PIPE_CSC_MODE(pipe), mode); |
| 6331 | } |
| 6332 | } |
| 6333 | |
| 6334 | static void haswell_set_pipeconf(struct drm_crtc *crtc) |
| 6335 | { |
| 6336 | struct drm_device *dev = crtc->dev; |
| 6337 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 6338 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 6339 | enum pipe pipe = intel_crtc->pipe; |
| 6340 | enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder; |
| 6341 | uint32_t val; |
| 6342 | |
| 6343 | val = 0; |
| 6344 | |
| 6345 | if (IS_HASWELL(dev) && intel_crtc->config.dither) |
| 6346 | val |= (PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_SP); |
| 6347 | |
| 6348 | if (intel_crtc->config.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE) |
| 6349 | val |= PIPECONF_INTERLACED_ILK; |
| 6350 | else |
| 6351 | val |= PIPECONF_PROGRESSIVE; |
| 6352 | |
| 6353 | I915_WRITE(PIPECONF(cpu_transcoder), val); |
| 6354 | POSTING_READ(PIPECONF(cpu_transcoder)); |
| 6355 | |
| 6356 | I915_WRITE(GAMMA_MODE(intel_crtc->pipe), GAMMA_MODE_MODE_8BIT); |
| 6357 | POSTING_READ(GAMMA_MODE(intel_crtc->pipe)); |
| 6358 | |
| 6359 | if (IS_BROADWELL(dev)) { |
| 6360 | val = 0; |
| 6361 | |
| 6362 | switch (intel_crtc->config.pipe_bpp) { |
| 6363 | case 18: |
| 6364 | val |= PIPEMISC_DITHER_6_BPC; |
| 6365 | break; |
| 6366 | case 24: |
| 6367 | val |= PIPEMISC_DITHER_8_BPC; |
| 6368 | break; |
| 6369 | case 30: |
| 6370 | val |= PIPEMISC_DITHER_10_BPC; |
| 6371 | break; |
| 6372 | case 36: |
| 6373 | val |= PIPEMISC_DITHER_12_BPC; |
| 6374 | break; |
| 6375 | default: |
| 6376 | /* Case prevented by pipe_config_set_bpp. */ |
| 6377 | BUG(); |
| 6378 | } |
| 6379 | |
| 6380 | if (intel_crtc->config.dither) |
| 6381 | val |= PIPEMISC_DITHER_ENABLE | PIPEMISC_DITHER_TYPE_SP; |
| 6382 | |
| 6383 | I915_WRITE(PIPEMISC(pipe), val); |
| 6384 | } |
| 6385 | } |
| 6386 | |
| 6387 | static bool ironlake_compute_clocks(struct drm_crtc *crtc, |
| 6388 | intel_clock_t *clock, |
| 6389 | bool *has_reduced_clock, |
| 6390 | intel_clock_t *reduced_clock) |
| 6391 | { |
| 6392 | struct drm_device *dev = crtc->dev; |
| 6393 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 6394 | struct intel_encoder *intel_encoder; |
| 6395 | int refclk; |
| 6396 | const intel_limit_t *limit; |
| 6397 | bool ret, is_lvds = false; |
| 6398 | |
| 6399 | for_each_encoder_on_crtc(dev, crtc, intel_encoder) { |
| 6400 | switch (intel_encoder->type) { |
| 6401 | case INTEL_OUTPUT_LVDS: |
| 6402 | is_lvds = true; |
| 6403 | break; |
| 6404 | } |
| 6405 | } |
| 6406 | |
| 6407 | refclk = ironlake_get_refclk(crtc); |
| 6408 | |
| 6409 | /* |
| 6410 | * Returns a set of divisors for the desired target clock with the given |
| 6411 | * refclk, or FALSE. The returned values represent the clock equation: |
| 6412 | * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2. |
| 6413 | */ |
| 6414 | limit = intel_limit(crtc, refclk); |
| 6415 | ret = dev_priv->display.find_dpll(limit, crtc, |
| 6416 | to_intel_crtc(crtc)->config.port_clock, |
| 6417 | refclk, NULL, clock); |
| 6418 | if (!ret) |
| 6419 | return false; |
| 6420 | |
| 6421 | if (is_lvds && dev_priv->lvds_downclock_avail) { |
| 6422 | /* |
| 6423 | * Ensure we match the reduced clock's P to the target clock. |
| 6424 | * If the clocks don't match, we can't switch the display clock |
| 6425 | * by using the FP0/FP1. In such case we will disable the LVDS |
| 6426 | * downclock feature. |
| 6427 | */ |
| 6428 | *has_reduced_clock = |
| 6429 | dev_priv->display.find_dpll(limit, crtc, |
| 6430 | dev_priv->lvds_downclock, |
| 6431 | refclk, clock, |
| 6432 | reduced_clock); |
| 6433 | } |
| 6434 | |
| 6435 | return true; |
| 6436 | } |
| 6437 | |
| 6438 | int ironlake_get_lanes_required(int target_clock, int link_bw, int bpp) |
| 6439 | { |
| 6440 | /* |
| 6441 | * Account for spread spectrum to avoid |
| 6442 | * oversubscribing the link. Max center spread |
| 6443 | * is 2.5%; use 5% for safety's sake. |
| 6444 | */ |
| 6445 | u32 bps = target_clock * bpp * 21 / 20; |
| 6446 | return DIV_ROUND_UP(bps, link_bw * 8); |
| 6447 | } |
| 6448 | |
| 6449 | static bool ironlake_needs_fb_cb_tune(struct dpll *dpll, int factor) |
| 6450 | { |
| 6451 | return i9xx_dpll_compute_m(dpll) < factor * dpll->n; |
| 6452 | } |
| 6453 | |
| 6454 | static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc, |
| 6455 | u32 *fp, |
| 6456 | intel_clock_t *reduced_clock, u32 *fp2) |
| 6457 | { |
| 6458 | struct drm_crtc *crtc = &intel_crtc->base; |
| 6459 | struct drm_device *dev = crtc->dev; |
| 6460 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 6461 | struct intel_encoder *intel_encoder; |
| 6462 | uint32_t dpll; |
| 6463 | int factor, num_connectors = 0; |
| 6464 | bool is_lvds = false, is_sdvo = false; |
| 6465 | |
| 6466 | for_each_encoder_on_crtc(dev, crtc, intel_encoder) { |
| 6467 | switch (intel_encoder->type) { |
| 6468 | case INTEL_OUTPUT_LVDS: |
| 6469 | is_lvds = true; |
| 6470 | break; |
| 6471 | case INTEL_OUTPUT_SDVO: |
| 6472 | case INTEL_OUTPUT_HDMI: |
| 6473 | is_sdvo = true; |
| 6474 | break; |
| 6475 | } |
| 6476 | |
| 6477 | num_connectors++; |
| 6478 | } |
| 6479 | |
| 6480 | /* Enable autotuning of the PLL clock (if permissible) */ |
| 6481 | factor = 21; |
| 6482 | if (is_lvds) { |
| 6483 | if ((intel_panel_use_ssc(dev_priv) && |
| 6484 | dev_priv->vbt.lvds_ssc_freq == 100000) || |
| 6485 | (HAS_PCH_IBX(dev) && intel_is_dual_link_lvds(dev))) |
| 6486 | factor = 25; |
| 6487 | } else if (intel_crtc->config.sdvo_tv_clock) |
| 6488 | factor = 20; |
| 6489 | |
| 6490 | if (ironlake_needs_fb_cb_tune(&intel_crtc->config.dpll, factor)) |
| 6491 | *fp |= FP_CB_TUNE; |
| 6492 | |
| 6493 | if (fp2 && (reduced_clock->m < factor * reduced_clock->n)) |
| 6494 | *fp2 |= FP_CB_TUNE; |
| 6495 | |
| 6496 | dpll = 0; |
| 6497 | |
| 6498 | if (is_lvds) |
| 6499 | dpll |= DPLLB_MODE_LVDS; |
| 6500 | else |
| 6501 | dpll |= DPLLB_MODE_DAC_SERIAL; |
| 6502 | |
| 6503 | dpll |= (intel_crtc->config.pixel_multiplier - 1) |
| 6504 | << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT; |
| 6505 | |
| 6506 | if (is_sdvo) |
| 6507 | dpll |= DPLL_SDVO_HIGH_SPEED; |
| 6508 | if (intel_crtc->config.has_dp_encoder) |
| 6509 | dpll |= DPLL_SDVO_HIGH_SPEED; |
| 6510 | |
| 6511 | /* compute bitmask from p1 value */ |
| 6512 | dpll |= (1 << (intel_crtc->config.dpll.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT; |
| 6513 | /* also FPA1 */ |
| 6514 | dpll |= (1 << (intel_crtc->config.dpll.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT; |
| 6515 | |
| 6516 | switch (intel_crtc->config.dpll.p2) { |
| 6517 | case 5: |
| 6518 | dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5; |
| 6519 | break; |
| 6520 | case 7: |
| 6521 | dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7; |
| 6522 | break; |
| 6523 | case 10: |
| 6524 | dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10; |
| 6525 | break; |
| 6526 | case 14: |
| 6527 | dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14; |
| 6528 | break; |
| 6529 | } |
| 6530 | |
| 6531 | if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2) |
| 6532 | dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN; |
| 6533 | else |
| 6534 | dpll |= PLL_REF_INPUT_DREFCLK; |
| 6535 | |
| 6536 | return dpll | DPLL_VCO_ENABLE; |
| 6537 | } |
| 6538 | |
| 6539 | static int ironlake_crtc_mode_set(struct drm_crtc *crtc, |
| 6540 | int x, int y, |
| 6541 | struct drm_framebuffer *fb) |
| 6542 | { |
| 6543 | struct drm_device *dev = crtc->dev; |
| 6544 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 6545 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 6546 | int pipe = intel_crtc->pipe; |
| 6547 | int plane = intel_crtc->plane; |
| 6548 | int num_connectors = 0; |
| 6549 | intel_clock_t clock, reduced_clock; |
| 6550 | u32 dpll = 0, fp = 0, fp2 = 0; |
| 6551 | bool ok, has_reduced_clock = false; |
| 6552 | bool is_lvds = false; |
| 6553 | struct intel_encoder *encoder; |
| 6554 | struct intel_shared_dpll *pll; |
| 6555 | int ret; |
| 6556 | |
| 6557 | for_each_encoder_on_crtc(dev, crtc, encoder) { |
| 6558 | switch (encoder->type) { |
| 6559 | case INTEL_OUTPUT_LVDS: |
| 6560 | is_lvds = true; |
| 6561 | break; |
| 6562 | } |
| 6563 | |
| 6564 | num_connectors++; |
| 6565 | } |
| 6566 | |
| 6567 | WARN(!(HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)), |
| 6568 | "Unexpected PCH type %d\n", INTEL_PCH_TYPE(dev)); |
| 6569 | |
| 6570 | ok = ironlake_compute_clocks(crtc, &clock, |
| 6571 | &has_reduced_clock, &reduced_clock); |
| 6572 | if (!ok && !intel_crtc->config.clock_set) { |
| 6573 | DRM_ERROR("Couldn't find PLL settings for mode!\n"); |
| 6574 | return -EINVAL; |
| 6575 | } |
| 6576 | /* Compat-code for transition, will disappear. */ |
| 6577 | if (!intel_crtc->config.clock_set) { |
| 6578 | intel_crtc->config.dpll.n = clock.n; |
| 6579 | intel_crtc->config.dpll.m1 = clock.m1; |
| 6580 | intel_crtc->config.dpll.m2 = clock.m2; |
| 6581 | intel_crtc->config.dpll.p1 = clock.p1; |
| 6582 | intel_crtc->config.dpll.p2 = clock.p2; |
| 6583 | } |
| 6584 | |
| 6585 | /* CPU eDP is the only output that doesn't need a PCH PLL of its own. */ |
| 6586 | if (intel_crtc->config.has_pch_encoder) { |
| 6587 | fp = i9xx_dpll_compute_fp(&intel_crtc->config.dpll); |
| 6588 | if (has_reduced_clock) |
| 6589 | fp2 = i9xx_dpll_compute_fp(&reduced_clock); |
| 6590 | |
| 6591 | dpll = ironlake_compute_dpll(intel_crtc, |
| 6592 | &fp, &reduced_clock, |
| 6593 | has_reduced_clock ? &fp2 : NULL); |
| 6594 | |
| 6595 | intel_crtc->config.dpll_hw_state.dpll = dpll; |
| 6596 | intel_crtc->config.dpll_hw_state.fp0 = fp; |
| 6597 | if (has_reduced_clock) |
| 6598 | intel_crtc->config.dpll_hw_state.fp1 = fp2; |
| 6599 | else |
| 6600 | intel_crtc->config.dpll_hw_state.fp1 = fp; |
| 6601 | |
| 6602 | pll = intel_get_shared_dpll(intel_crtc); |
| 6603 | if (pll == NULL) { |
| 6604 | DRM_DEBUG_DRIVER("failed to find PLL for pipe %c\n", |
| 6605 | pipe_name(pipe)); |
| 6606 | return -EINVAL; |
| 6607 | } |
| 6608 | } else |
| 6609 | intel_put_shared_dpll(intel_crtc); |
| 6610 | |
| 6611 | if (intel_crtc->config.has_dp_encoder) |
| 6612 | intel_dp_set_m_n(intel_crtc); |
| 6613 | |
| 6614 | if (is_lvds && has_reduced_clock && i915.powersave) |
| 6615 | intel_crtc->lowfreq_avail = true; |
| 6616 | else |
| 6617 | intel_crtc->lowfreq_avail = false; |
| 6618 | |
| 6619 | intel_set_pipe_timings(intel_crtc); |
| 6620 | |
| 6621 | if (intel_crtc->config.has_pch_encoder) { |
| 6622 | intel_cpu_transcoder_set_m_n(intel_crtc, |
| 6623 | &intel_crtc->config.fdi_m_n); |
| 6624 | } |
| 6625 | |
| 6626 | ironlake_set_pipeconf(crtc); |
| 6627 | |
| 6628 | /* Set up the display plane register */ |
| 6629 | I915_WRITE(DSPCNTR(plane), DISPPLANE_GAMMA_ENABLE); |
| 6630 | POSTING_READ(DSPCNTR(plane)); |
| 6631 | |
| 6632 | ret = intel_pipe_set_base(crtc, x, y, fb); |
| 6633 | |
| 6634 | return ret; |
| 6635 | } |
| 6636 | |
| 6637 | static void intel_pch_transcoder_get_m_n(struct intel_crtc *crtc, |
| 6638 | struct intel_link_m_n *m_n) |
| 6639 | { |
| 6640 | struct drm_device *dev = crtc->base.dev; |
| 6641 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 6642 | enum pipe pipe = crtc->pipe; |
| 6643 | |
| 6644 | m_n->link_m = I915_READ(PCH_TRANS_LINK_M1(pipe)); |
| 6645 | m_n->link_n = I915_READ(PCH_TRANS_LINK_N1(pipe)); |
| 6646 | m_n->gmch_m = I915_READ(PCH_TRANS_DATA_M1(pipe)) |
| 6647 | & ~TU_SIZE_MASK; |
| 6648 | m_n->gmch_n = I915_READ(PCH_TRANS_DATA_N1(pipe)); |
| 6649 | m_n->tu = ((I915_READ(PCH_TRANS_DATA_M1(pipe)) |
| 6650 | & TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1; |
| 6651 | } |
| 6652 | |
| 6653 | static void intel_cpu_transcoder_get_m_n(struct intel_crtc *crtc, |
| 6654 | enum transcoder transcoder, |
| 6655 | struct intel_link_m_n *m_n) |
| 6656 | { |
| 6657 | struct drm_device *dev = crtc->base.dev; |
| 6658 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 6659 | enum pipe pipe = crtc->pipe; |
| 6660 | |
| 6661 | if (INTEL_INFO(dev)->gen >= 5) { |
| 6662 | m_n->link_m = I915_READ(PIPE_LINK_M1(transcoder)); |
| 6663 | m_n->link_n = I915_READ(PIPE_LINK_N1(transcoder)); |
| 6664 | m_n->gmch_m = I915_READ(PIPE_DATA_M1(transcoder)) |
| 6665 | & ~TU_SIZE_MASK; |
| 6666 | m_n->gmch_n = I915_READ(PIPE_DATA_N1(transcoder)); |
| 6667 | m_n->tu = ((I915_READ(PIPE_DATA_M1(transcoder)) |
| 6668 | & TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1; |
| 6669 | } else { |
| 6670 | m_n->link_m = I915_READ(PIPE_LINK_M_G4X(pipe)); |
| 6671 | m_n->link_n = I915_READ(PIPE_LINK_N_G4X(pipe)); |
| 6672 | m_n->gmch_m = I915_READ(PIPE_DATA_M_G4X(pipe)) |
| 6673 | & ~TU_SIZE_MASK; |
| 6674 | m_n->gmch_n = I915_READ(PIPE_DATA_N_G4X(pipe)); |
| 6675 | m_n->tu = ((I915_READ(PIPE_DATA_M_G4X(pipe)) |
| 6676 | & TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1; |
| 6677 | } |
| 6678 | } |
| 6679 | |
| 6680 | void intel_dp_get_m_n(struct intel_crtc *crtc, |
| 6681 | struct intel_crtc_config *pipe_config) |
| 6682 | { |
| 6683 | if (crtc->config.has_pch_encoder) |
| 6684 | intel_pch_transcoder_get_m_n(crtc, &pipe_config->dp_m_n); |
| 6685 | else |
| 6686 | intel_cpu_transcoder_get_m_n(crtc, pipe_config->cpu_transcoder, |
| 6687 | &pipe_config->dp_m_n); |
| 6688 | } |
| 6689 | |
| 6690 | static void ironlake_get_fdi_m_n_config(struct intel_crtc *crtc, |
| 6691 | struct intel_crtc_config *pipe_config) |
| 6692 | { |
| 6693 | intel_cpu_transcoder_get_m_n(crtc, pipe_config->cpu_transcoder, |
| 6694 | &pipe_config->fdi_m_n); |
| 6695 | } |
| 6696 | |
| 6697 | static void ironlake_get_pfit_config(struct intel_crtc *crtc, |
| 6698 | struct intel_crtc_config *pipe_config) |
| 6699 | { |
| 6700 | struct drm_device *dev = crtc->base.dev; |
| 6701 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 6702 | uint32_t tmp; |
| 6703 | |
| 6704 | tmp = I915_READ(PF_CTL(crtc->pipe)); |
| 6705 | |
| 6706 | if (tmp & PF_ENABLE) { |
| 6707 | pipe_config->pch_pfit.enabled = true; |
| 6708 | pipe_config->pch_pfit.pos = I915_READ(PF_WIN_POS(crtc->pipe)); |
| 6709 | pipe_config->pch_pfit.size = I915_READ(PF_WIN_SZ(crtc->pipe)); |
| 6710 | |
| 6711 | /* We currently do not free assignements of panel fitters on |
| 6712 | * ivb/hsw (since we don't use the higher upscaling modes which |
| 6713 | * differentiates them) so just WARN about this case for now. */ |
| 6714 | if (IS_GEN7(dev)) { |
| 6715 | WARN_ON((tmp & PF_PIPE_SEL_MASK_IVB) != |
| 6716 | PF_PIPE_SEL_IVB(crtc->pipe)); |
| 6717 | } |
| 6718 | } |
| 6719 | } |
| 6720 | |
| 6721 | static void ironlake_get_plane_config(struct intel_crtc *crtc, |
| 6722 | struct intel_plane_config *plane_config) |
| 6723 | { |
| 6724 | struct drm_device *dev = crtc->base.dev; |
| 6725 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 6726 | u32 val, base, offset; |
| 6727 | int pipe = crtc->pipe, plane = crtc->plane; |
| 6728 | int fourcc, pixel_format; |
| 6729 | int aligned_height; |
| 6730 | |
| 6731 | crtc->base.fb = kzalloc(sizeof(struct intel_framebuffer), GFP_KERNEL); |
| 6732 | if (!crtc->base.fb) { |
| 6733 | DRM_DEBUG_KMS("failed to alloc fb\n"); |
| 6734 | return; |
| 6735 | } |
| 6736 | |
| 6737 | val = I915_READ(DSPCNTR(plane)); |
| 6738 | |
| 6739 | if (INTEL_INFO(dev)->gen >= 4) |
| 6740 | if (val & DISPPLANE_TILED) |
| 6741 | plane_config->tiled = true; |
| 6742 | |
| 6743 | pixel_format = val & DISPPLANE_PIXFORMAT_MASK; |
| 6744 | fourcc = intel_format_to_fourcc(pixel_format); |
| 6745 | crtc->base.fb->pixel_format = fourcc; |
| 6746 | crtc->base.fb->bits_per_pixel = |
| 6747 | drm_format_plane_cpp(fourcc, 0) * 8; |
| 6748 | |
| 6749 | base = I915_READ(DSPSURF(plane)) & 0xfffff000; |
| 6750 | if (IS_HASWELL(dev) || IS_BROADWELL(dev)) { |
| 6751 | offset = I915_READ(DSPOFFSET(plane)); |
| 6752 | } else { |
| 6753 | if (plane_config->tiled) |
| 6754 | offset = I915_READ(DSPTILEOFF(plane)); |
| 6755 | else |
| 6756 | offset = I915_READ(DSPLINOFF(plane)); |
| 6757 | } |
| 6758 | plane_config->base = base; |
| 6759 | |
| 6760 | val = I915_READ(PIPESRC(pipe)); |
| 6761 | crtc->base.fb->width = ((val >> 16) & 0xfff) + 1; |
| 6762 | crtc->base.fb->height = ((val >> 0) & 0xfff) + 1; |
| 6763 | |
| 6764 | val = I915_READ(DSPSTRIDE(pipe)); |
| 6765 | crtc->base.fb->pitches[0] = val & 0xffffff80; |
| 6766 | |
| 6767 | aligned_height = intel_align_height(dev, crtc->base.fb->height, |
| 6768 | plane_config->tiled); |
| 6769 | |
| 6770 | plane_config->size = ALIGN(crtc->base.fb->pitches[0] * |
| 6771 | aligned_height, PAGE_SIZE); |
| 6772 | |
| 6773 | DRM_DEBUG_KMS("pipe/plane %d/%d with fb: size=%dx%d@%d, offset=%x, pitch %d, size 0x%x\n", |
| 6774 | pipe, plane, crtc->base.fb->width, |
| 6775 | crtc->base.fb->height, |
| 6776 | crtc->base.fb->bits_per_pixel, base, |
| 6777 | crtc->base.fb->pitches[0], |
| 6778 | plane_config->size); |
| 6779 | } |
| 6780 | |
| 6781 | static bool ironlake_get_pipe_config(struct intel_crtc *crtc, |
| 6782 | struct intel_crtc_config *pipe_config) |
| 6783 | { |
| 6784 | struct drm_device *dev = crtc->base.dev; |
| 6785 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 6786 | uint32_t tmp; |
| 6787 | |
| 6788 | pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe; |
| 6789 | pipe_config->shared_dpll = DPLL_ID_PRIVATE; |
| 6790 | |
| 6791 | tmp = I915_READ(PIPECONF(crtc->pipe)); |
| 6792 | if (!(tmp & PIPECONF_ENABLE)) |
| 6793 | return false; |
| 6794 | |
| 6795 | switch (tmp & PIPECONF_BPC_MASK) { |
| 6796 | case PIPECONF_6BPC: |
| 6797 | pipe_config->pipe_bpp = 18; |
| 6798 | break; |
| 6799 | case PIPECONF_8BPC: |
| 6800 | pipe_config->pipe_bpp = 24; |
| 6801 | break; |
| 6802 | case PIPECONF_10BPC: |
| 6803 | pipe_config->pipe_bpp = 30; |
| 6804 | break; |
| 6805 | case PIPECONF_12BPC: |
| 6806 | pipe_config->pipe_bpp = 36; |
| 6807 | break; |
| 6808 | default: |
| 6809 | break; |
| 6810 | } |
| 6811 | |
| 6812 | if (I915_READ(PCH_TRANSCONF(crtc->pipe)) & TRANS_ENABLE) { |
| 6813 | struct intel_shared_dpll *pll; |
| 6814 | |
| 6815 | pipe_config->has_pch_encoder = true; |
| 6816 | |
| 6817 | tmp = I915_READ(FDI_RX_CTL(crtc->pipe)); |
| 6818 | pipe_config->fdi_lanes = ((FDI_DP_PORT_WIDTH_MASK & tmp) >> |
| 6819 | FDI_DP_PORT_WIDTH_SHIFT) + 1; |
| 6820 | |
| 6821 | ironlake_get_fdi_m_n_config(crtc, pipe_config); |
| 6822 | |
| 6823 | if (HAS_PCH_IBX(dev_priv->dev)) { |
| 6824 | pipe_config->shared_dpll = |
| 6825 | (enum intel_dpll_id) crtc->pipe; |
| 6826 | } else { |
| 6827 | tmp = I915_READ(PCH_DPLL_SEL); |
| 6828 | if (tmp & TRANS_DPLLB_SEL(crtc->pipe)) |
| 6829 | pipe_config->shared_dpll = DPLL_ID_PCH_PLL_B; |
| 6830 | else |
| 6831 | pipe_config->shared_dpll = DPLL_ID_PCH_PLL_A; |
| 6832 | } |
| 6833 | |
| 6834 | pll = &dev_priv->shared_dplls[pipe_config->shared_dpll]; |
| 6835 | |
| 6836 | WARN_ON(!pll->get_hw_state(dev_priv, pll, |
| 6837 | &pipe_config->dpll_hw_state)); |
| 6838 | |
| 6839 | tmp = pipe_config->dpll_hw_state.dpll; |
| 6840 | pipe_config->pixel_multiplier = |
| 6841 | ((tmp & PLL_REF_SDVO_HDMI_MULTIPLIER_MASK) |
| 6842 | >> PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT) + 1; |
| 6843 | |
| 6844 | ironlake_pch_clock_get(crtc, pipe_config); |
| 6845 | } else { |
| 6846 | pipe_config->pixel_multiplier = 1; |
| 6847 | } |
| 6848 | |
| 6849 | intel_get_pipe_timings(crtc, pipe_config); |
| 6850 | |
| 6851 | ironlake_get_pfit_config(crtc, pipe_config); |
| 6852 | |
| 6853 | return true; |
| 6854 | } |
| 6855 | |
| 6856 | static void assert_can_disable_lcpll(struct drm_i915_private *dev_priv) |
| 6857 | { |
| 6858 | struct drm_device *dev = dev_priv->dev; |
| 6859 | struct intel_ddi_plls *plls = &dev_priv->ddi_plls; |
| 6860 | struct intel_crtc *crtc; |
| 6861 | unsigned long irqflags; |
| 6862 | uint32_t val; |
| 6863 | |
| 6864 | list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head) |
| 6865 | WARN(crtc->active, "CRTC for pipe %c enabled\n", |
| 6866 | pipe_name(crtc->pipe)); |
| 6867 | |
| 6868 | WARN(I915_READ(HSW_PWR_WELL_DRIVER), "Power well on\n"); |
| 6869 | WARN(plls->spll_refcount, "SPLL enabled\n"); |
| 6870 | WARN(plls->wrpll1_refcount, "WRPLL1 enabled\n"); |
| 6871 | WARN(plls->wrpll2_refcount, "WRPLL2 enabled\n"); |
| 6872 | WARN(I915_READ(PCH_PP_STATUS) & PP_ON, "Panel power on\n"); |
| 6873 | WARN(I915_READ(BLC_PWM_CPU_CTL2) & BLM_PWM_ENABLE, |
| 6874 | "CPU PWM1 enabled\n"); |
| 6875 | WARN(I915_READ(HSW_BLC_PWM2_CTL) & BLM_PWM_ENABLE, |
| 6876 | "CPU PWM2 enabled\n"); |
| 6877 | WARN(I915_READ(BLC_PWM_PCH_CTL1) & BLM_PCH_PWM_ENABLE, |
| 6878 | "PCH PWM1 enabled\n"); |
| 6879 | WARN(I915_READ(UTIL_PIN_CTL) & UTIL_PIN_ENABLE, |
| 6880 | "Utility pin enabled\n"); |
| 6881 | WARN(I915_READ(PCH_GTC_CTL) & PCH_GTC_ENABLE, "PCH GTC enabled\n"); |
| 6882 | |
| 6883 | spin_lock_irqsave(&dev_priv->irq_lock, irqflags); |
| 6884 | val = I915_READ(DEIMR); |
| 6885 | WARN((val | DE_PCH_EVENT_IVB) != 0xffffffff, |
| 6886 | "Unexpected DEIMR bits enabled: 0x%x\n", val); |
| 6887 | val = I915_READ(SDEIMR); |
| 6888 | WARN((val | SDE_HOTPLUG_MASK_CPT) != 0xffffffff, |
| 6889 | "Unexpected SDEIMR bits enabled: 0x%x\n", val); |
| 6890 | spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); |
| 6891 | } |
| 6892 | |
| 6893 | /* |
| 6894 | * This function implements pieces of two sequences from BSpec: |
| 6895 | * - Sequence for display software to disable LCPLL |
| 6896 | * - Sequence for display software to allow package C8+ |
| 6897 | * The steps implemented here are just the steps that actually touch the LCPLL |
| 6898 | * register. Callers should take care of disabling all the display engine |
| 6899 | * functions, doing the mode unset, fixing interrupts, etc. |
| 6900 | */ |
| 6901 | static void hsw_disable_lcpll(struct drm_i915_private *dev_priv, |
| 6902 | bool switch_to_fclk, bool allow_power_down) |
| 6903 | { |
| 6904 | uint32_t val; |
| 6905 | |
| 6906 | assert_can_disable_lcpll(dev_priv); |
| 6907 | |
| 6908 | val = I915_READ(LCPLL_CTL); |
| 6909 | |
| 6910 | if (switch_to_fclk) { |
| 6911 | val |= LCPLL_CD_SOURCE_FCLK; |
| 6912 | I915_WRITE(LCPLL_CTL, val); |
| 6913 | |
| 6914 | if (wait_for_atomic_us(I915_READ(LCPLL_CTL) & |
| 6915 | LCPLL_CD_SOURCE_FCLK_DONE, 1)) |
| 6916 | DRM_ERROR("Switching to FCLK failed\n"); |
| 6917 | |
| 6918 | val = I915_READ(LCPLL_CTL); |
| 6919 | } |
| 6920 | |
| 6921 | val |= LCPLL_PLL_DISABLE; |
| 6922 | I915_WRITE(LCPLL_CTL, val); |
| 6923 | POSTING_READ(LCPLL_CTL); |
| 6924 | |
| 6925 | if (wait_for((I915_READ(LCPLL_CTL) & LCPLL_PLL_LOCK) == 0, 1)) |
| 6926 | DRM_ERROR("LCPLL still locked\n"); |
| 6927 | |
| 6928 | val = I915_READ(D_COMP); |
| 6929 | val |= D_COMP_COMP_DISABLE; |
| 6930 | mutex_lock(&dev_priv->rps.hw_lock); |
| 6931 | if (sandybridge_pcode_write(dev_priv, GEN6_PCODE_WRITE_D_COMP, val)) |
| 6932 | DRM_ERROR("Failed to disable D_COMP\n"); |
| 6933 | mutex_unlock(&dev_priv->rps.hw_lock); |
| 6934 | POSTING_READ(D_COMP); |
| 6935 | ndelay(100); |
| 6936 | |
| 6937 | if (wait_for((I915_READ(D_COMP) & D_COMP_RCOMP_IN_PROGRESS) == 0, 1)) |
| 6938 | DRM_ERROR("D_COMP RCOMP still in progress\n"); |
| 6939 | |
| 6940 | if (allow_power_down) { |
| 6941 | val = I915_READ(LCPLL_CTL); |
| 6942 | val |= LCPLL_POWER_DOWN_ALLOW; |
| 6943 | I915_WRITE(LCPLL_CTL, val); |
| 6944 | POSTING_READ(LCPLL_CTL); |
| 6945 | } |
| 6946 | } |
| 6947 | |
| 6948 | /* |
| 6949 | * Fully restores LCPLL, disallowing power down and switching back to LCPLL |
| 6950 | * source. |
| 6951 | */ |
| 6952 | static void hsw_restore_lcpll(struct drm_i915_private *dev_priv) |
| 6953 | { |
| 6954 | uint32_t val; |
| 6955 | |
| 6956 | val = I915_READ(LCPLL_CTL); |
| 6957 | |
| 6958 | if ((val & (LCPLL_PLL_LOCK | LCPLL_PLL_DISABLE | LCPLL_CD_SOURCE_FCLK | |
| 6959 | LCPLL_POWER_DOWN_ALLOW)) == LCPLL_PLL_LOCK) |
| 6960 | return; |
| 6961 | |
| 6962 | /* Make sure we're not on PC8 state before disabling PC8, otherwise |
| 6963 | * we'll hang the machine! */ |
| 6964 | gen6_gt_force_wake_get(dev_priv, FORCEWAKE_ALL); |
| 6965 | |
| 6966 | if (val & LCPLL_POWER_DOWN_ALLOW) { |
| 6967 | val &= ~LCPLL_POWER_DOWN_ALLOW; |
| 6968 | I915_WRITE(LCPLL_CTL, val); |
| 6969 | POSTING_READ(LCPLL_CTL); |
| 6970 | } |
| 6971 | |
| 6972 | val = I915_READ(D_COMP); |
| 6973 | val |= D_COMP_COMP_FORCE; |
| 6974 | val &= ~D_COMP_COMP_DISABLE; |
| 6975 | mutex_lock(&dev_priv->rps.hw_lock); |
| 6976 | if (sandybridge_pcode_write(dev_priv, GEN6_PCODE_WRITE_D_COMP, val)) |
| 6977 | DRM_ERROR("Failed to enable D_COMP\n"); |
| 6978 | mutex_unlock(&dev_priv->rps.hw_lock); |
| 6979 | POSTING_READ(D_COMP); |
| 6980 | |
| 6981 | val = I915_READ(LCPLL_CTL); |
| 6982 | val &= ~LCPLL_PLL_DISABLE; |
| 6983 | I915_WRITE(LCPLL_CTL, val); |
| 6984 | |
| 6985 | if (wait_for(I915_READ(LCPLL_CTL) & LCPLL_PLL_LOCK, 5)) |
| 6986 | DRM_ERROR("LCPLL not locked yet\n"); |
| 6987 | |
| 6988 | if (val & LCPLL_CD_SOURCE_FCLK) { |
| 6989 | val = I915_READ(LCPLL_CTL); |
| 6990 | val &= ~LCPLL_CD_SOURCE_FCLK; |
| 6991 | I915_WRITE(LCPLL_CTL, val); |
| 6992 | |
| 6993 | if (wait_for_atomic_us((I915_READ(LCPLL_CTL) & |
| 6994 | LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1)) |
| 6995 | DRM_ERROR("Switching back to LCPLL failed\n"); |
| 6996 | } |
| 6997 | |
| 6998 | gen6_gt_force_wake_put(dev_priv, FORCEWAKE_ALL); |
| 6999 | } |
| 7000 | |
| 7001 | void hsw_enable_pc8_work(struct work_struct *__work) |
| 7002 | { |
| 7003 | struct drm_i915_private *dev_priv = |
| 7004 | container_of(to_delayed_work(__work), struct drm_i915_private, |
| 7005 | pc8.enable_work); |
| 7006 | struct drm_device *dev = dev_priv->dev; |
| 7007 | uint32_t val; |
| 7008 | |
| 7009 | WARN_ON(!HAS_PC8(dev)); |
| 7010 | |
| 7011 | if (dev_priv->pc8.enabled) |
| 7012 | return; |
| 7013 | |
| 7014 | DRM_DEBUG_KMS("Enabling package C8+\n"); |
| 7015 | |
| 7016 | dev_priv->pc8.enabled = true; |
| 7017 | |
| 7018 | if (dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) { |
| 7019 | val = I915_READ(SOUTH_DSPCLK_GATE_D); |
| 7020 | val &= ~PCH_LP_PARTITION_LEVEL_DISABLE; |
| 7021 | I915_WRITE(SOUTH_DSPCLK_GATE_D, val); |
| 7022 | } |
| 7023 | |
| 7024 | lpt_disable_clkout_dp(dev); |
| 7025 | hsw_pc8_disable_interrupts(dev); |
| 7026 | hsw_disable_lcpll(dev_priv, true, true); |
| 7027 | |
| 7028 | intel_runtime_pm_put(dev_priv); |
| 7029 | } |
| 7030 | |
| 7031 | static void __hsw_enable_package_c8(struct drm_i915_private *dev_priv) |
| 7032 | { |
| 7033 | WARN_ON(!mutex_is_locked(&dev_priv->pc8.lock)); |
| 7034 | WARN(dev_priv->pc8.disable_count < 1, |
| 7035 | "pc8.disable_count: %d\n", dev_priv->pc8.disable_count); |
| 7036 | |
| 7037 | dev_priv->pc8.disable_count--; |
| 7038 | if (dev_priv->pc8.disable_count != 0) |
| 7039 | return; |
| 7040 | |
| 7041 | schedule_delayed_work(&dev_priv->pc8.enable_work, |
| 7042 | msecs_to_jiffies(i915.pc8_timeout)); |
| 7043 | } |
| 7044 | |
| 7045 | static void __hsw_disable_package_c8(struct drm_i915_private *dev_priv) |
| 7046 | { |
| 7047 | struct drm_device *dev = dev_priv->dev; |
| 7048 | uint32_t val; |
| 7049 | |
| 7050 | WARN_ON(!mutex_is_locked(&dev_priv->pc8.lock)); |
| 7051 | WARN(dev_priv->pc8.disable_count < 0, |
| 7052 | "pc8.disable_count: %d\n", dev_priv->pc8.disable_count); |
| 7053 | |
| 7054 | dev_priv->pc8.disable_count++; |
| 7055 | if (dev_priv->pc8.disable_count != 1) |
| 7056 | return; |
| 7057 | |
| 7058 | WARN_ON(!HAS_PC8(dev)); |
| 7059 | |
| 7060 | cancel_delayed_work_sync(&dev_priv->pc8.enable_work); |
| 7061 | if (!dev_priv->pc8.enabled) |
| 7062 | return; |
| 7063 | |
| 7064 | DRM_DEBUG_KMS("Disabling package C8+\n"); |
| 7065 | |
| 7066 | intel_runtime_pm_get(dev_priv); |
| 7067 | |
| 7068 | hsw_restore_lcpll(dev_priv); |
| 7069 | hsw_pc8_restore_interrupts(dev); |
| 7070 | lpt_init_pch_refclk(dev); |
| 7071 | |
| 7072 | if (dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) { |
| 7073 | val = I915_READ(SOUTH_DSPCLK_GATE_D); |
| 7074 | val |= PCH_LP_PARTITION_LEVEL_DISABLE; |
| 7075 | I915_WRITE(SOUTH_DSPCLK_GATE_D, val); |
| 7076 | } |
| 7077 | |
| 7078 | intel_prepare_ddi(dev); |
| 7079 | i915_gem_init_swizzling(dev); |
| 7080 | mutex_lock(&dev_priv->rps.hw_lock); |
| 7081 | gen6_update_ring_freq(dev); |
| 7082 | mutex_unlock(&dev_priv->rps.hw_lock); |
| 7083 | dev_priv->pc8.enabled = false; |
| 7084 | } |
| 7085 | |
| 7086 | void hsw_enable_package_c8(struct drm_i915_private *dev_priv) |
| 7087 | { |
| 7088 | if (!HAS_PC8(dev_priv->dev)) |
| 7089 | return; |
| 7090 | |
| 7091 | mutex_lock(&dev_priv->pc8.lock); |
| 7092 | __hsw_enable_package_c8(dev_priv); |
| 7093 | mutex_unlock(&dev_priv->pc8.lock); |
| 7094 | } |
| 7095 | |
| 7096 | void hsw_disable_package_c8(struct drm_i915_private *dev_priv) |
| 7097 | { |
| 7098 | if (!HAS_PC8(dev_priv->dev)) |
| 7099 | return; |
| 7100 | |
| 7101 | mutex_lock(&dev_priv->pc8.lock); |
| 7102 | __hsw_disable_package_c8(dev_priv); |
| 7103 | mutex_unlock(&dev_priv->pc8.lock); |
| 7104 | } |
| 7105 | |
| 7106 | static bool hsw_can_enable_package_c8(struct drm_i915_private *dev_priv) |
| 7107 | { |
| 7108 | struct drm_device *dev = dev_priv->dev; |
| 7109 | struct intel_crtc *crtc; |
| 7110 | uint32_t val; |
| 7111 | |
| 7112 | list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head) |
| 7113 | if (crtc->base.enabled) |
| 7114 | return false; |
| 7115 | |
| 7116 | /* This case is still possible since we have the i915.disable_power_well |
| 7117 | * parameter and also the KVMr or something else might be requesting the |
| 7118 | * power well. */ |
| 7119 | val = I915_READ(HSW_PWR_WELL_DRIVER); |
| 7120 | if (val != 0) { |
| 7121 | DRM_DEBUG_KMS("Not enabling PC8: power well on\n"); |
| 7122 | return false; |
| 7123 | } |
| 7124 | |
| 7125 | return true; |
| 7126 | } |
| 7127 | |
| 7128 | /* Since we're called from modeset_global_resources there's no way to |
| 7129 | * symmetrically increase and decrease the refcount, so we use |
| 7130 | * dev_priv->pc8.requirements_met to track whether we already have the refcount |
| 7131 | * or not. |
| 7132 | */ |
| 7133 | static void hsw_update_package_c8(struct drm_device *dev) |
| 7134 | { |
| 7135 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 7136 | bool allow; |
| 7137 | |
| 7138 | if (!HAS_PC8(dev_priv->dev)) |
| 7139 | return; |
| 7140 | |
| 7141 | if (!i915.enable_pc8) |
| 7142 | return; |
| 7143 | |
| 7144 | mutex_lock(&dev_priv->pc8.lock); |
| 7145 | |
| 7146 | allow = hsw_can_enable_package_c8(dev_priv); |
| 7147 | |
| 7148 | if (allow == dev_priv->pc8.requirements_met) |
| 7149 | goto done; |
| 7150 | |
| 7151 | dev_priv->pc8.requirements_met = allow; |
| 7152 | |
| 7153 | if (allow) |
| 7154 | __hsw_enable_package_c8(dev_priv); |
| 7155 | else |
| 7156 | __hsw_disable_package_c8(dev_priv); |
| 7157 | |
| 7158 | done: |
| 7159 | mutex_unlock(&dev_priv->pc8.lock); |
| 7160 | } |
| 7161 | |
| 7162 | static void haswell_modeset_global_resources(struct drm_device *dev) |
| 7163 | { |
| 7164 | modeset_update_crtc_power_domains(dev); |
| 7165 | hsw_update_package_c8(dev); |
| 7166 | } |
| 7167 | |
| 7168 | static int haswell_crtc_mode_set(struct drm_crtc *crtc, |
| 7169 | int x, int y, |
| 7170 | struct drm_framebuffer *fb) |
| 7171 | { |
| 7172 | struct drm_device *dev = crtc->dev; |
| 7173 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 7174 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 7175 | int plane = intel_crtc->plane; |
| 7176 | int ret; |
| 7177 | |
| 7178 | if (!intel_ddi_pll_select(intel_crtc)) |
| 7179 | return -EINVAL; |
| 7180 | intel_ddi_pll_enable(intel_crtc); |
| 7181 | |
| 7182 | if (intel_crtc->config.has_dp_encoder) |
| 7183 | intel_dp_set_m_n(intel_crtc); |
| 7184 | |
| 7185 | intel_crtc->lowfreq_avail = false; |
| 7186 | |
| 7187 | intel_set_pipe_timings(intel_crtc); |
| 7188 | |
| 7189 | if (intel_crtc->config.has_pch_encoder) { |
| 7190 | intel_cpu_transcoder_set_m_n(intel_crtc, |
| 7191 | &intel_crtc->config.fdi_m_n); |
| 7192 | } |
| 7193 | |
| 7194 | haswell_set_pipeconf(crtc); |
| 7195 | |
| 7196 | intel_set_pipe_csc(crtc); |
| 7197 | |
| 7198 | /* Set up the display plane register */ |
| 7199 | I915_WRITE(DSPCNTR(plane), DISPPLANE_GAMMA_ENABLE | DISPPLANE_PIPE_CSC_ENABLE); |
| 7200 | POSTING_READ(DSPCNTR(plane)); |
| 7201 | |
| 7202 | ret = intel_pipe_set_base(crtc, x, y, fb); |
| 7203 | |
| 7204 | return ret; |
| 7205 | } |
| 7206 | |
| 7207 | static bool haswell_get_pipe_config(struct intel_crtc *crtc, |
| 7208 | struct intel_crtc_config *pipe_config) |
| 7209 | { |
| 7210 | struct drm_device *dev = crtc->base.dev; |
| 7211 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 7212 | enum intel_display_power_domain pfit_domain; |
| 7213 | uint32_t tmp; |
| 7214 | |
| 7215 | if (!intel_display_power_enabled(dev_priv, |
| 7216 | POWER_DOMAIN_PIPE(crtc->pipe))) |
| 7217 | return false; |
| 7218 | |
| 7219 | pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe; |
| 7220 | pipe_config->shared_dpll = DPLL_ID_PRIVATE; |
| 7221 | |
| 7222 | tmp = I915_READ(TRANS_DDI_FUNC_CTL(TRANSCODER_EDP)); |
| 7223 | if (tmp & TRANS_DDI_FUNC_ENABLE) { |
| 7224 | enum pipe trans_edp_pipe; |
| 7225 | switch (tmp & TRANS_DDI_EDP_INPUT_MASK) { |
| 7226 | default: |
| 7227 | WARN(1, "unknown pipe linked to edp transcoder\n"); |
| 7228 | case TRANS_DDI_EDP_INPUT_A_ONOFF: |
| 7229 | case TRANS_DDI_EDP_INPUT_A_ON: |
| 7230 | trans_edp_pipe = PIPE_A; |
| 7231 | break; |
| 7232 | case TRANS_DDI_EDP_INPUT_B_ONOFF: |
| 7233 | trans_edp_pipe = PIPE_B; |
| 7234 | break; |
| 7235 | case TRANS_DDI_EDP_INPUT_C_ONOFF: |
| 7236 | trans_edp_pipe = PIPE_C; |
| 7237 | break; |
| 7238 | } |
| 7239 | |
| 7240 | if (trans_edp_pipe == crtc->pipe) |
| 7241 | pipe_config->cpu_transcoder = TRANSCODER_EDP; |
| 7242 | } |
| 7243 | |
| 7244 | if (!intel_display_power_enabled(dev_priv, |
| 7245 | POWER_DOMAIN_TRANSCODER(pipe_config->cpu_transcoder))) |
| 7246 | return false; |
| 7247 | |
| 7248 | tmp = I915_READ(PIPECONF(pipe_config->cpu_transcoder)); |
| 7249 | if (!(tmp & PIPECONF_ENABLE)) |
| 7250 | return false; |
| 7251 | |
| 7252 | /* |
| 7253 | * Haswell has only FDI/PCH transcoder A. It is which is connected to |
| 7254 | * DDI E. So just check whether this pipe is wired to DDI E and whether |
| 7255 | * the PCH transcoder is on. |
| 7256 | */ |
| 7257 | tmp = I915_READ(TRANS_DDI_FUNC_CTL(pipe_config->cpu_transcoder)); |
| 7258 | if ((tmp & TRANS_DDI_PORT_MASK) == TRANS_DDI_SELECT_PORT(PORT_E) && |
| 7259 | I915_READ(LPT_TRANSCONF) & TRANS_ENABLE) { |
| 7260 | pipe_config->has_pch_encoder = true; |
| 7261 | |
| 7262 | tmp = I915_READ(FDI_RX_CTL(PIPE_A)); |
| 7263 | pipe_config->fdi_lanes = ((FDI_DP_PORT_WIDTH_MASK & tmp) >> |
| 7264 | FDI_DP_PORT_WIDTH_SHIFT) + 1; |
| 7265 | |
| 7266 | ironlake_get_fdi_m_n_config(crtc, pipe_config); |
| 7267 | } |
| 7268 | |
| 7269 | intel_get_pipe_timings(crtc, pipe_config); |
| 7270 | |
| 7271 | pfit_domain = POWER_DOMAIN_PIPE_PANEL_FITTER(crtc->pipe); |
| 7272 | if (intel_display_power_enabled(dev_priv, pfit_domain)) |
| 7273 | ironlake_get_pfit_config(crtc, pipe_config); |
| 7274 | |
| 7275 | if (IS_HASWELL(dev)) |
| 7276 | pipe_config->ips_enabled = hsw_crtc_supports_ips(crtc) && |
| 7277 | (I915_READ(IPS_CTL) & IPS_ENABLE); |
| 7278 | |
| 7279 | pipe_config->pixel_multiplier = 1; |
| 7280 | |
| 7281 | return true; |
| 7282 | } |
| 7283 | |
| 7284 | static int intel_crtc_mode_set(struct drm_crtc *crtc, |
| 7285 | int x, int y, |
| 7286 | struct drm_framebuffer *fb) |
| 7287 | { |
| 7288 | struct drm_device *dev = crtc->dev; |
| 7289 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 7290 | struct intel_encoder *encoder; |
| 7291 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 7292 | struct drm_display_mode *mode = &intel_crtc->config.requested_mode; |
| 7293 | int pipe = intel_crtc->pipe; |
| 7294 | int ret; |
| 7295 | |
| 7296 | drm_vblank_pre_modeset(dev, pipe); |
| 7297 | |
| 7298 | ret = dev_priv->display.crtc_mode_set(crtc, x, y, fb); |
| 7299 | |
| 7300 | drm_vblank_post_modeset(dev, pipe); |
| 7301 | |
| 7302 | if (ret != 0) |
| 7303 | return ret; |
| 7304 | |
| 7305 | for_each_encoder_on_crtc(dev, crtc, encoder) { |
| 7306 | DRM_DEBUG_KMS("[ENCODER:%d:%s] set [MODE:%d:%s]\n", |
| 7307 | encoder->base.base.id, |
| 7308 | drm_get_encoder_name(&encoder->base), |
| 7309 | mode->base.id, mode->name); |
| 7310 | encoder->mode_set(encoder); |
| 7311 | } |
| 7312 | |
| 7313 | return 0; |
| 7314 | } |
| 7315 | |
| 7316 | static struct { |
| 7317 | int clock; |
| 7318 | u32 config; |
| 7319 | } hdmi_audio_clock[] = { |
| 7320 | { DIV_ROUND_UP(25200 * 1000, 1001), AUD_CONFIG_PIXEL_CLOCK_HDMI_25175 }, |
| 7321 | { 25200, AUD_CONFIG_PIXEL_CLOCK_HDMI_25200 }, /* default per bspec */ |
| 7322 | { 27000, AUD_CONFIG_PIXEL_CLOCK_HDMI_27000 }, |
| 7323 | { 27000 * 1001 / 1000, AUD_CONFIG_PIXEL_CLOCK_HDMI_27027 }, |
| 7324 | { 54000, AUD_CONFIG_PIXEL_CLOCK_HDMI_54000 }, |
| 7325 | { 54000 * 1001 / 1000, AUD_CONFIG_PIXEL_CLOCK_HDMI_54054 }, |
| 7326 | { DIV_ROUND_UP(74250 * 1000, 1001), AUD_CONFIG_PIXEL_CLOCK_HDMI_74176 }, |
| 7327 | { 74250, AUD_CONFIG_PIXEL_CLOCK_HDMI_74250 }, |
| 7328 | { DIV_ROUND_UP(148500 * 1000, 1001), AUD_CONFIG_PIXEL_CLOCK_HDMI_148352 }, |
| 7329 | { 148500, AUD_CONFIG_PIXEL_CLOCK_HDMI_148500 }, |
| 7330 | }; |
| 7331 | |
| 7332 | /* get AUD_CONFIG_PIXEL_CLOCK_HDMI_* value for mode */ |
| 7333 | static u32 audio_config_hdmi_pixel_clock(struct drm_display_mode *mode) |
| 7334 | { |
| 7335 | int i; |
| 7336 | |
| 7337 | for (i = 0; i < ARRAY_SIZE(hdmi_audio_clock); i++) { |
| 7338 | if (mode->clock == hdmi_audio_clock[i].clock) |
| 7339 | break; |
| 7340 | } |
| 7341 | |
| 7342 | if (i == ARRAY_SIZE(hdmi_audio_clock)) { |
| 7343 | DRM_DEBUG_KMS("HDMI audio pixel clock setting for %d not found, falling back to defaults\n", mode->clock); |
| 7344 | i = 1; |
| 7345 | } |
| 7346 | |
| 7347 | DRM_DEBUG_KMS("Configuring HDMI audio for pixel clock %d (0x%08x)\n", |
| 7348 | hdmi_audio_clock[i].clock, |
| 7349 | hdmi_audio_clock[i].config); |
| 7350 | |
| 7351 | return hdmi_audio_clock[i].config; |
| 7352 | } |
| 7353 | |
| 7354 | static bool intel_eld_uptodate(struct drm_connector *connector, |
| 7355 | int reg_eldv, uint32_t bits_eldv, |
| 7356 | int reg_elda, uint32_t bits_elda, |
| 7357 | int reg_edid) |
| 7358 | { |
| 7359 | struct drm_i915_private *dev_priv = connector->dev->dev_private; |
| 7360 | uint8_t *eld = connector->eld; |
| 7361 | uint32_t i; |
| 7362 | |
| 7363 | i = I915_READ(reg_eldv); |
| 7364 | i &= bits_eldv; |
| 7365 | |
| 7366 | if (!eld[0]) |
| 7367 | return !i; |
| 7368 | |
| 7369 | if (!i) |
| 7370 | return false; |
| 7371 | |
| 7372 | i = I915_READ(reg_elda); |
| 7373 | i &= ~bits_elda; |
| 7374 | I915_WRITE(reg_elda, i); |
| 7375 | |
| 7376 | for (i = 0; i < eld[2]; i++) |
| 7377 | if (I915_READ(reg_edid) != *((uint32_t *)eld + i)) |
| 7378 | return false; |
| 7379 | |
| 7380 | return true; |
| 7381 | } |
| 7382 | |
| 7383 | static void g4x_write_eld(struct drm_connector *connector, |
| 7384 | struct drm_crtc *crtc, |
| 7385 | struct drm_display_mode *mode) |
| 7386 | { |
| 7387 | struct drm_i915_private *dev_priv = connector->dev->dev_private; |
| 7388 | uint8_t *eld = connector->eld; |
| 7389 | uint32_t eldv; |
| 7390 | uint32_t len; |
| 7391 | uint32_t i; |
| 7392 | |
| 7393 | i = I915_READ(G4X_AUD_VID_DID); |
| 7394 | |
| 7395 | if (i == INTEL_AUDIO_DEVBLC || i == INTEL_AUDIO_DEVCL) |
| 7396 | eldv = G4X_ELDV_DEVCL_DEVBLC; |
| 7397 | else |
| 7398 | eldv = G4X_ELDV_DEVCTG; |
| 7399 | |
| 7400 | if (intel_eld_uptodate(connector, |
| 7401 | G4X_AUD_CNTL_ST, eldv, |
| 7402 | G4X_AUD_CNTL_ST, G4X_ELD_ADDR, |
| 7403 | G4X_HDMIW_HDMIEDID)) |
| 7404 | return; |
| 7405 | |
| 7406 | i = I915_READ(G4X_AUD_CNTL_ST); |
| 7407 | i &= ~(eldv | G4X_ELD_ADDR); |
| 7408 | len = (i >> 9) & 0x1f; /* ELD buffer size */ |
| 7409 | I915_WRITE(G4X_AUD_CNTL_ST, i); |
| 7410 | |
| 7411 | if (!eld[0]) |
| 7412 | return; |
| 7413 | |
| 7414 | len = min_t(uint8_t, eld[2], len); |
| 7415 | DRM_DEBUG_DRIVER("ELD size %d\n", len); |
| 7416 | for (i = 0; i < len; i++) |
| 7417 | I915_WRITE(G4X_HDMIW_HDMIEDID, *((uint32_t *)eld + i)); |
| 7418 | |
| 7419 | i = I915_READ(G4X_AUD_CNTL_ST); |
| 7420 | i |= eldv; |
| 7421 | I915_WRITE(G4X_AUD_CNTL_ST, i); |
| 7422 | } |
| 7423 | |
| 7424 | static void haswell_write_eld(struct drm_connector *connector, |
| 7425 | struct drm_crtc *crtc, |
| 7426 | struct drm_display_mode *mode) |
| 7427 | { |
| 7428 | struct drm_i915_private *dev_priv = connector->dev->dev_private; |
| 7429 | uint8_t *eld = connector->eld; |
| 7430 | struct drm_device *dev = crtc->dev; |
| 7431 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 7432 | uint32_t eldv; |
| 7433 | uint32_t i; |
| 7434 | int len; |
| 7435 | int pipe = to_intel_crtc(crtc)->pipe; |
| 7436 | int tmp; |
| 7437 | |
| 7438 | int hdmiw_hdmiedid = HSW_AUD_EDID_DATA(pipe); |
| 7439 | int aud_cntl_st = HSW_AUD_DIP_ELD_CTRL(pipe); |
| 7440 | int aud_config = HSW_AUD_CFG(pipe); |
| 7441 | int aud_cntrl_st2 = HSW_AUD_PIN_ELD_CP_VLD; |
| 7442 | |
| 7443 | |
| 7444 | DRM_DEBUG_DRIVER("HDMI: Haswell Audio initialize....\n"); |
| 7445 | |
| 7446 | /* Audio output enable */ |
| 7447 | DRM_DEBUG_DRIVER("HDMI audio: enable codec\n"); |
| 7448 | tmp = I915_READ(aud_cntrl_st2); |
| 7449 | tmp |= (AUDIO_OUTPUT_ENABLE_A << (pipe * 4)); |
| 7450 | I915_WRITE(aud_cntrl_st2, tmp); |
| 7451 | |
| 7452 | /* Wait for 1 vertical blank */ |
| 7453 | intel_wait_for_vblank(dev, pipe); |
| 7454 | |
| 7455 | /* Set ELD valid state */ |
| 7456 | tmp = I915_READ(aud_cntrl_st2); |
| 7457 | DRM_DEBUG_DRIVER("HDMI audio: pin eld vld status=0x%08x\n", tmp); |
| 7458 | tmp |= (AUDIO_ELD_VALID_A << (pipe * 4)); |
| 7459 | I915_WRITE(aud_cntrl_st2, tmp); |
| 7460 | tmp = I915_READ(aud_cntrl_st2); |
| 7461 | DRM_DEBUG_DRIVER("HDMI audio: eld vld status=0x%08x\n", tmp); |
| 7462 | |
| 7463 | /* Enable HDMI mode */ |
| 7464 | tmp = I915_READ(aud_config); |
| 7465 | DRM_DEBUG_DRIVER("HDMI audio: audio conf: 0x%08x\n", tmp); |
| 7466 | /* clear N_programing_enable and N_value_index */ |
| 7467 | tmp &= ~(AUD_CONFIG_N_VALUE_INDEX | AUD_CONFIG_N_PROG_ENABLE); |
| 7468 | I915_WRITE(aud_config, tmp); |
| 7469 | |
| 7470 | DRM_DEBUG_DRIVER("ELD on pipe %c\n", pipe_name(pipe)); |
| 7471 | |
| 7472 | eldv = AUDIO_ELD_VALID_A << (pipe * 4); |
| 7473 | intel_crtc->eld_vld = true; |
| 7474 | |
| 7475 | if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) { |
| 7476 | DRM_DEBUG_DRIVER("ELD: DisplayPort detected\n"); |
| 7477 | eld[5] |= (1 << 2); /* Conn_Type, 0x1 = DisplayPort */ |
| 7478 | I915_WRITE(aud_config, AUD_CONFIG_N_VALUE_INDEX); /* 0x1 = DP */ |
| 7479 | } else { |
| 7480 | I915_WRITE(aud_config, audio_config_hdmi_pixel_clock(mode)); |
| 7481 | } |
| 7482 | |
| 7483 | if (intel_eld_uptodate(connector, |
| 7484 | aud_cntrl_st2, eldv, |
| 7485 | aud_cntl_st, IBX_ELD_ADDRESS, |
| 7486 | hdmiw_hdmiedid)) |
| 7487 | return; |
| 7488 | |
| 7489 | i = I915_READ(aud_cntrl_st2); |
| 7490 | i &= ~eldv; |
| 7491 | I915_WRITE(aud_cntrl_st2, i); |
| 7492 | |
| 7493 | if (!eld[0]) |
| 7494 | return; |
| 7495 | |
| 7496 | i = I915_READ(aud_cntl_st); |
| 7497 | i &= ~IBX_ELD_ADDRESS; |
| 7498 | I915_WRITE(aud_cntl_st, i); |
| 7499 | i = (i >> 29) & DIP_PORT_SEL_MASK; /* DIP_Port_Select, 0x1 = PortB */ |
| 7500 | DRM_DEBUG_DRIVER("port num:%d\n", i); |
| 7501 | |
| 7502 | len = min_t(uint8_t, eld[2], 21); /* 84 bytes of hw ELD buffer */ |
| 7503 | DRM_DEBUG_DRIVER("ELD size %d\n", len); |
| 7504 | for (i = 0; i < len; i++) |
| 7505 | I915_WRITE(hdmiw_hdmiedid, *((uint32_t *)eld + i)); |
| 7506 | |
| 7507 | i = I915_READ(aud_cntrl_st2); |
| 7508 | i |= eldv; |
| 7509 | I915_WRITE(aud_cntrl_st2, i); |
| 7510 | |
| 7511 | } |
| 7512 | |
| 7513 | static void ironlake_write_eld(struct drm_connector *connector, |
| 7514 | struct drm_crtc *crtc, |
| 7515 | struct drm_display_mode *mode) |
| 7516 | { |
| 7517 | struct drm_i915_private *dev_priv = connector->dev->dev_private; |
| 7518 | uint8_t *eld = connector->eld; |
| 7519 | uint32_t eldv; |
| 7520 | uint32_t i; |
| 7521 | int len; |
| 7522 | int hdmiw_hdmiedid; |
| 7523 | int aud_config; |
| 7524 | int aud_cntl_st; |
| 7525 | int aud_cntrl_st2; |
| 7526 | int pipe = to_intel_crtc(crtc)->pipe; |
| 7527 | |
| 7528 | if (HAS_PCH_IBX(connector->dev)) { |
| 7529 | hdmiw_hdmiedid = IBX_HDMIW_HDMIEDID(pipe); |
| 7530 | aud_config = IBX_AUD_CFG(pipe); |
| 7531 | aud_cntl_st = IBX_AUD_CNTL_ST(pipe); |
| 7532 | aud_cntrl_st2 = IBX_AUD_CNTL_ST2; |
| 7533 | } else if (IS_VALLEYVIEW(connector->dev)) { |
| 7534 | hdmiw_hdmiedid = VLV_HDMIW_HDMIEDID(pipe); |
| 7535 | aud_config = VLV_AUD_CFG(pipe); |
| 7536 | aud_cntl_st = VLV_AUD_CNTL_ST(pipe); |
| 7537 | aud_cntrl_st2 = VLV_AUD_CNTL_ST2; |
| 7538 | } else { |
| 7539 | hdmiw_hdmiedid = CPT_HDMIW_HDMIEDID(pipe); |
| 7540 | aud_config = CPT_AUD_CFG(pipe); |
| 7541 | aud_cntl_st = CPT_AUD_CNTL_ST(pipe); |
| 7542 | aud_cntrl_st2 = CPT_AUD_CNTRL_ST2; |
| 7543 | } |
| 7544 | |
| 7545 | DRM_DEBUG_DRIVER("ELD on pipe %c\n", pipe_name(pipe)); |
| 7546 | |
| 7547 | if (IS_VALLEYVIEW(connector->dev)) { |
| 7548 | struct intel_encoder *intel_encoder; |
| 7549 | struct intel_digital_port *intel_dig_port; |
| 7550 | |
| 7551 | intel_encoder = intel_attached_encoder(connector); |
| 7552 | intel_dig_port = enc_to_dig_port(&intel_encoder->base); |
| 7553 | i = intel_dig_port->port; |
| 7554 | } else { |
| 7555 | i = I915_READ(aud_cntl_st); |
| 7556 | i = (i >> 29) & DIP_PORT_SEL_MASK; |
| 7557 | /* DIP_Port_Select, 0x1 = PortB */ |
| 7558 | } |
| 7559 | |
| 7560 | if (!i) { |
| 7561 | DRM_DEBUG_DRIVER("Audio directed to unknown port\n"); |
| 7562 | /* operate blindly on all ports */ |
| 7563 | eldv = IBX_ELD_VALIDB; |
| 7564 | eldv |= IBX_ELD_VALIDB << 4; |
| 7565 | eldv |= IBX_ELD_VALIDB << 8; |
| 7566 | } else { |
| 7567 | DRM_DEBUG_DRIVER("ELD on port %c\n", port_name(i)); |
| 7568 | eldv = IBX_ELD_VALIDB << ((i - 1) * 4); |
| 7569 | } |
| 7570 | |
| 7571 | if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) { |
| 7572 | DRM_DEBUG_DRIVER("ELD: DisplayPort detected\n"); |
| 7573 | eld[5] |= (1 << 2); /* Conn_Type, 0x1 = DisplayPort */ |
| 7574 | I915_WRITE(aud_config, AUD_CONFIG_N_VALUE_INDEX); /* 0x1 = DP */ |
| 7575 | } else { |
| 7576 | I915_WRITE(aud_config, audio_config_hdmi_pixel_clock(mode)); |
| 7577 | } |
| 7578 | |
| 7579 | if (intel_eld_uptodate(connector, |
| 7580 | aud_cntrl_st2, eldv, |
| 7581 | aud_cntl_st, IBX_ELD_ADDRESS, |
| 7582 | hdmiw_hdmiedid)) |
| 7583 | return; |
| 7584 | |
| 7585 | i = I915_READ(aud_cntrl_st2); |
| 7586 | i &= ~eldv; |
| 7587 | I915_WRITE(aud_cntrl_st2, i); |
| 7588 | |
| 7589 | if (!eld[0]) |
| 7590 | return; |
| 7591 | |
| 7592 | i = I915_READ(aud_cntl_st); |
| 7593 | i &= ~IBX_ELD_ADDRESS; |
| 7594 | I915_WRITE(aud_cntl_st, i); |
| 7595 | |
| 7596 | len = min_t(uint8_t, eld[2], 21); /* 84 bytes of hw ELD buffer */ |
| 7597 | DRM_DEBUG_DRIVER("ELD size %d\n", len); |
| 7598 | for (i = 0; i < len; i++) |
| 7599 | I915_WRITE(hdmiw_hdmiedid, *((uint32_t *)eld + i)); |
| 7600 | |
| 7601 | i = I915_READ(aud_cntrl_st2); |
| 7602 | i |= eldv; |
| 7603 | I915_WRITE(aud_cntrl_st2, i); |
| 7604 | } |
| 7605 | |
| 7606 | void intel_write_eld(struct drm_encoder *encoder, |
| 7607 | struct drm_display_mode *mode) |
| 7608 | { |
| 7609 | struct drm_crtc *crtc = encoder->crtc; |
| 7610 | struct drm_connector *connector; |
| 7611 | struct drm_device *dev = encoder->dev; |
| 7612 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 7613 | |
| 7614 | connector = drm_select_eld(encoder, mode); |
| 7615 | if (!connector) |
| 7616 | return; |
| 7617 | |
| 7618 | DRM_DEBUG_DRIVER("ELD on [CONNECTOR:%d:%s], [ENCODER:%d:%s]\n", |
| 7619 | connector->base.id, |
| 7620 | drm_get_connector_name(connector), |
| 7621 | connector->encoder->base.id, |
| 7622 | drm_get_encoder_name(connector->encoder)); |
| 7623 | |
| 7624 | connector->eld[6] = drm_av_sync_delay(connector, mode) / 2; |
| 7625 | |
| 7626 | if (dev_priv->display.write_eld) |
| 7627 | dev_priv->display.write_eld(connector, crtc, mode); |
| 7628 | } |
| 7629 | |
| 7630 | static void i845_update_cursor(struct drm_crtc *crtc, u32 base) |
| 7631 | { |
| 7632 | struct drm_device *dev = crtc->dev; |
| 7633 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 7634 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 7635 | bool visible = base != 0; |
| 7636 | u32 cntl; |
| 7637 | |
| 7638 | if (intel_crtc->cursor_visible == visible) |
| 7639 | return; |
| 7640 | |
| 7641 | cntl = I915_READ(_CURACNTR); |
| 7642 | if (visible) { |
| 7643 | /* On these chipsets we can only modify the base whilst |
| 7644 | * the cursor is disabled. |
| 7645 | */ |
| 7646 | I915_WRITE(_CURABASE, base); |
| 7647 | |
| 7648 | cntl &= ~(CURSOR_FORMAT_MASK); |
| 7649 | /* XXX width must be 64, stride 256 => 0x00 << 28 */ |
| 7650 | cntl |= CURSOR_ENABLE | |
| 7651 | CURSOR_GAMMA_ENABLE | |
| 7652 | CURSOR_FORMAT_ARGB; |
| 7653 | } else |
| 7654 | cntl &= ~(CURSOR_ENABLE | CURSOR_GAMMA_ENABLE); |
| 7655 | I915_WRITE(_CURACNTR, cntl); |
| 7656 | |
| 7657 | intel_crtc->cursor_visible = visible; |
| 7658 | } |
| 7659 | |
| 7660 | static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base) |
| 7661 | { |
| 7662 | struct drm_device *dev = crtc->dev; |
| 7663 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 7664 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 7665 | int pipe = intel_crtc->pipe; |
| 7666 | bool visible = base != 0; |
| 7667 | |
| 7668 | if (intel_crtc->cursor_visible != visible) { |
| 7669 | uint32_t cntl = I915_READ(CURCNTR(pipe)); |
| 7670 | if (base) { |
| 7671 | cntl &= ~(CURSOR_MODE | MCURSOR_PIPE_SELECT); |
| 7672 | cntl |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE; |
| 7673 | cntl |= pipe << 28; /* Connect to correct pipe */ |
| 7674 | } else { |
| 7675 | cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE); |
| 7676 | cntl |= CURSOR_MODE_DISABLE; |
| 7677 | } |
| 7678 | I915_WRITE(CURCNTR(pipe), cntl); |
| 7679 | |
| 7680 | intel_crtc->cursor_visible = visible; |
| 7681 | } |
| 7682 | /* and commit changes on next vblank */ |
| 7683 | POSTING_READ(CURCNTR(pipe)); |
| 7684 | I915_WRITE(CURBASE(pipe), base); |
| 7685 | POSTING_READ(CURBASE(pipe)); |
| 7686 | } |
| 7687 | |
| 7688 | static void ivb_update_cursor(struct drm_crtc *crtc, u32 base) |
| 7689 | { |
| 7690 | struct drm_device *dev = crtc->dev; |
| 7691 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 7692 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 7693 | int pipe = intel_crtc->pipe; |
| 7694 | bool visible = base != 0; |
| 7695 | |
| 7696 | if (intel_crtc->cursor_visible != visible) { |
| 7697 | uint32_t cntl = I915_READ(CURCNTR_IVB(pipe)); |
| 7698 | if (base) { |
| 7699 | cntl &= ~CURSOR_MODE; |
| 7700 | cntl |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE; |
| 7701 | } else { |
| 7702 | cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE); |
| 7703 | cntl |= CURSOR_MODE_DISABLE; |
| 7704 | } |
| 7705 | if (IS_HASWELL(dev) || IS_BROADWELL(dev)) { |
| 7706 | cntl |= CURSOR_PIPE_CSC_ENABLE; |
| 7707 | cntl &= ~CURSOR_TRICKLE_FEED_DISABLE; |
| 7708 | } |
| 7709 | I915_WRITE(CURCNTR_IVB(pipe), cntl); |
| 7710 | |
| 7711 | intel_crtc->cursor_visible = visible; |
| 7712 | } |
| 7713 | /* and commit changes on next vblank */ |
| 7714 | POSTING_READ(CURCNTR_IVB(pipe)); |
| 7715 | I915_WRITE(CURBASE_IVB(pipe), base); |
| 7716 | POSTING_READ(CURBASE_IVB(pipe)); |
| 7717 | } |
| 7718 | |
| 7719 | /* If no-part of the cursor is visible on the framebuffer, then the GPU may hang... */ |
| 7720 | static void intel_crtc_update_cursor(struct drm_crtc *crtc, |
| 7721 | bool on) |
| 7722 | { |
| 7723 | struct drm_device *dev = crtc->dev; |
| 7724 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 7725 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 7726 | int pipe = intel_crtc->pipe; |
| 7727 | int x = intel_crtc->cursor_x; |
| 7728 | int y = intel_crtc->cursor_y; |
| 7729 | u32 base = 0, pos = 0; |
| 7730 | bool visible; |
| 7731 | |
| 7732 | if (on) |
| 7733 | base = intel_crtc->cursor_addr; |
| 7734 | |
| 7735 | if (x >= intel_crtc->config.pipe_src_w) |
| 7736 | base = 0; |
| 7737 | |
| 7738 | if (y >= intel_crtc->config.pipe_src_h) |
| 7739 | base = 0; |
| 7740 | |
| 7741 | if (x < 0) { |
| 7742 | if (x + intel_crtc->cursor_width <= 0) |
| 7743 | base = 0; |
| 7744 | |
| 7745 | pos |= CURSOR_POS_SIGN << CURSOR_X_SHIFT; |
| 7746 | x = -x; |
| 7747 | } |
| 7748 | pos |= x << CURSOR_X_SHIFT; |
| 7749 | |
| 7750 | if (y < 0) { |
| 7751 | if (y + intel_crtc->cursor_height <= 0) |
| 7752 | base = 0; |
| 7753 | |
| 7754 | pos |= CURSOR_POS_SIGN << CURSOR_Y_SHIFT; |
| 7755 | y = -y; |
| 7756 | } |
| 7757 | pos |= y << CURSOR_Y_SHIFT; |
| 7758 | |
| 7759 | visible = base != 0; |
| 7760 | if (!visible && !intel_crtc->cursor_visible) |
| 7761 | return; |
| 7762 | |
| 7763 | if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev) || IS_BROADWELL(dev)) { |
| 7764 | I915_WRITE(CURPOS_IVB(pipe), pos); |
| 7765 | ivb_update_cursor(crtc, base); |
| 7766 | } else { |
| 7767 | I915_WRITE(CURPOS(pipe), pos); |
| 7768 | if (IS_845G(dev) || IS_I865G(dev)) |
| 7769 | i845_update_cursor(crtc, base); |
| 7770 | else |
| 7771 | i9xx_update_cursor(crtc, base); |
| 7772 | } |
| 7773 | } |
| 7774 | |
| 7775 | static int intel_crtc_cursor_set(struct drm_crtc *crtc, |
| 7776 | struct drm_file *file, |
| 7777 | uint32_t handle, |
| 7778 | uint32_t width, uint32_t height) |
| 7779 | { |
| 7780 | struct drm_device *dev = crtc->dev; |
| 7781 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 7782 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 7783 | struct drm_i915_gem_object *obj; |
| 7784 | uint32_t addr; |
| 7785 | int ret; |
| 7786 | |
| 7787 | /* if we want to turn off the cursor ignore width and height */ |
| 7788 | if (!handle) { |
| 7789 | DRM_DEBUG_KMS("cursor off\n"); |
| 7790 | addr = 0; |
| 7791 | obj = NULL; |
| 7792 | mutex_lock(&dev->struct_mutex); |
| 7793 | goto finish; |
| 7794 | } |
| 7795 | |
| 7796 | /* Currently we only support 64x64 cursors */ |
| 7797 | if (width != 64 || height != 64) { |
| 7798 | DRM_ERROR("we currently only support 64x64 cursors\n"); |
| 7799 | return -EINVAL; |
| 7800 | } |
| 7801 | |
| 7802 | obj = to_intel_bo(drm_gem_object_lookup(dev, file, handle)); |
| 7803 | if (&obj->base == NULL) |
| 7804 | return -ENOENT; |
| 7805 | |
| 7806 | if (obj->base.size < width * height * 4) { |
| 7807 | DRM_DEBUG_KMS("buffer is to small\n"); |
| 7808 | ret = -ENOMEM; |
| 7809 | goto fail; |
| 7810 | } |
| 7811 | |
| 7812 | /* we only need to pin inside GTT if cursor is non-phy */ |
| 7813 | mutex_lock(&dev->struct_mutex); |
| 7814 | if (!INTEL_INFO(dev)->cursor_needs_physical) { |
| 7815 | unsigned alignment; |
| 7816 | |
| 7817 | if (obj->tiling_mode) { |
| 7818 | DRM_DEBUG_KMS("cursor cannot be tiled\n"); |
| 7819 | ret = -EINVAL; |
| 7820 | goto fail_locked; |
| 7821 | } |
| 7822 | |
| 7823 | /* Note that the w/a also requires 2 PTE of padding following |
| 7824 | * the bo. We currently fill all unused PTE with the shadow |
| 7825 | * page and so we should always have valid PTE following the |
| 7826 | * cursor preventing the VT-d warning. |
| 7827 | */ |
| 7828 | alignment = 0; |
| 7829 | if (need_vtd_wa(dev)) |
| 7830 | alignment = 64*1024; |
| 7831 | |
| 7832 | ret = i915_gem_object_pin_to_display_plane(obj, alignment, NULL); |
| 7833 | if (ret) { |
| 7834 | DRM_DEBUG_KMS("failed to move cursor bo into the GTT\n"); |
| 7835 | goto fail_locked; |
| 7836 | } |
| 7837 | |
| 7838 | ret = i915_gem_object_put_fence(obj); |
| 7839 | if (ret) { |
| 7840 | DRM_DEBUG_KMS("failed to release fence for cursor"); |
| 7841 | goto fail_unpin; |
| 7842 | } |
| 7843 | |
| 7844 | addr = i915_gem_obj_ggtt_offset(obj); |
| 7845 | } else { |
| 7846 | int align = IS_I830(dev) ? 16 * 1024 : 256; |
| 7847 | ret = i915_gem_attach_phys_object(dev, obj, |
| 7848 | (intel_crtc->pipe == 0) ? I915_GEM_PHYS_CURSOR_0 : I915_GEM_PHYS_CURSOR_1, |
| 7849 | align); |
| 7850 | if (ret) { |
| 7851 | DRM_DEBUG_KMS("failed to attach phys object\n"); |
| 7852 | goto fail_locked; |
| 7853 | } |
| 7854 | addr = obj->phys_obj->handle->busaddr; |
| 7855 | } |
| 7856 | |
| 7857 | if (IS_GEN2(dev)) |
| 7858 | I915_WRITE(CURSIZE, (height << 12) | width); |
| 7859 | |
| 7860 | finish: |
| 7861 | if (intel_crtc->cursor_bo) { |
| 7862 | if (INTEL_INFO(dev)->cursor_needs_physical) { |
| 7863 | if (intel_crtc->cursor_bo != obj) |
| 7864 | i915_gem_detach_phys_object(dev, intel_crtc->cursor_bo); |
| 7865 | } else |
| 7866 | i915_gem_object_unpin_from_display_plane(intel_crtc->cursor_bo); |
| 7867 | drm_gem_object_unreference(&intel_crtc->cursor_bo->base); |
| 7868 | } |
| 7869 | |
| 7870 | mutex_unlock(&dev->struct_mutex); |
| 7871 | |
| 7872 | intel_crtc->cursor_addr = addr; |
| 7873 | intel_crtc->cursor_bo = obj; |
| 7874 | intel_crtc->cursor_width = width; |
| 7875 | intel_crtc->cursor_height = height; |
| 7876 | |
| 7877 | if (intel_crtc->active) |
| 7878 | intel_crtc_update_cursor(crtc, intel_crtc->cursor_bo != NULL); |
| 7879 | |
| 7880 | return 0; |
| 7881 | fail_unpin: |
| 7882 | i915_gem_object_unpin_from_display_plane(obj); |
| 7883 | fail_locked: |
| 7884 | mutex_unlock(&dev->struct_mutex); |
| 7885 | fail: |
| 7886 | drm_gem_object_unreference_unlocked(&obj->base); |
| 7887 | return ret; |
| 7888 | } |
| 7889 | |
| 7890 | static int intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y) |
| 7891 | { |
| 7892 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 7893 | |
| 7894 | intel_crtc->cursor_x = clamp_t(int, x, SHRT_MIN, SHRT_MAX); |
| 7895 | intel_crtc->cursor_y = clamp_t(int, y, SHRT_MIN, SHRT_MAX); |
| 7896 | |
| 7897 | if (intel_crtc->active) |
| 7898 | intel_crtc_update_cursor(crtc, intel_crtc->cursor_bo != NULL); |
| 7899 | |
| 7900 | return 0; |
| 7901 | } |
| 7902 | |
| 7903 | static void intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green, |
| 7904 | u16 *blue, uint32_t start, uint32_t size) |
| 7905 | { |
| 7906 | int end = (start + size > 256) ? 256 : start + size, i; |
| 7907 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 7908 | |
| 7909 | for (i = start; i < end; i++) { |
| 7910 | intel_crtc->lut_r[i] = red[i] >> 8; |
| 7911 | intel_crtc->lut_g[i] = green[i] >> 8; |
| 7912 | intel_crtc->lut_b[i] = blue[i] >> 8; |
| 7913 | } |
| 7914 | |
| 7915 | intel_crtc_load_lut(crtc); |
| 7916 | } |
| 7917 | |
| 7918 | /* VESA 640x480x72Hz mode to set on the pipe */ |
| 7919 | static struct drm_display_mode load_detect_mode = { |
| 7920 | DRM_MODE("640x480", DRM_MODE_TYPE_DEFAULT, 31500, 640, 664, |
| 7921 | 704, 832, 0, 480, 489, 491, 520, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), |
| 7922 | }; |
| 7923 | |
| 7924 | struct drm_framebuffer * |
| 7925 | __intel_framebuffer_create(struct drm_device *dev, |
| 7926 | struct drm_mode_fb_cmd2 *mode_cmd, |
| 7927 | struct drm_i915_gem_object *obj) |
| 7928 | { |
| 7929 | struct intel_framebuffer *intel_fb; |
| 7930 | int ret; |
| 7931 | |
| 7932 | intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL); |
| 7933 | if (!intel_fb) { |
| 7934 | drm_gem_object_unreference_unlocked(&obj->base); |
| 7935 | return ERR_PTR(-ENOMEM); |
| 7936 | } |
| 7937 | |
| 7938 | ret = intel_framebuffer_init(dev, intel_fb, mode_cmd, obj); |
| 7939 | if (ret) |
| 7940 | goto err; |
| 7941 | |
| 7942 | return &intel_fb->base; |
| 7943 | err: |
| 7944 | drm_gem_object_unreference_unlocked(&obj->base); |
| 7945 | kfree(intel_fb); |
| 7946 | |
| 7947 | return ERR_PTR(ret); |
| 7948 | } |
| 7949 | |
| 7950 | static struct drm_framebuffer * |
| 7951 | intel_framebuffer_create(struct drm_device *dev, |
| 7952 | struct drm_mode_fb_cmd2 *mode_cmd, |
| 7953 | struct drm_i915_gem_object *obj) |
| 7954 | { |
| 7955 | struct drm_framebuffer *fb; |
| 7956 | int ret; |
| 7957 | |
| 7958 | ret = i915_mutex_lock_interruptible(dev); |
| 7959 | if (ret) |
| 7960 | return ERR_PTR(ret); |
| 7961 | fb = __intel_framebuffer_create(dev, mode_cmd, obj); |
| 7962 | mutex_unlock(&dev->struct_mutex); |
| 7963 | |
| 7964 | return fb; |
| 7965 | } |
| 7966 | |
| 7967 | static u32 |
| 7968 | intel_framebuffer_pitch_for_width(int width, int bpp) |
| 7969 | { |
| 7970 | u32 pitch = DIV_ROUND_UP(width * bpp, 8); |
| 7971 | return ALIGN(pitch, 64); |
| 7972 | } |
| 7973 | |
| 7974 | static u32 |
| 7975 | intel_framebuffer_size_for_mode(struct drm_display_mode *mode, int bpp) |
| 7976 | { |
| 7977 | u32 pitch = intel_framebuffer_pitch_for_width(mode->hdisplay, bpp); |
| 7978 | return ALIGN(pitch * mode->vdisplay, PAGE_SIZE); |
| 7979 | } |
| 7980 | |
| 7981 | static struct drm_framebuffer * |
| 7982 | intel_framebuffer_create_for_mode(struct drm_device *dev, |
| 7983 | struct drm_display_mode *mode, |
| 7984 | int depth, int bpp) |
| 7985 | { |
| 7986 | struct drm_i915_gem_object *obj; |
| 7987 | struct drm_mode_fb_cmd2 mode_cmd = { 0 }; |
| 7988 | |
| 7989 | obj = i915_gem_alloc_object(dev, |
| 7990 | intel_framebuffer_size_for_mode(mode, bpp)); |
| 7991 | if (obj == NULL) |
| 7992 | return ERR_PTR(-ENOMEM); |
| 7993 | |
| 7994 | mode_cmd.width = mode->hdisplay; |
| 7995 | mode_cmd.height = mode->vdisplay; |
| 7996 | mode_cmd.pitches[0] = intel_framebuffer_pitch_for_width(mode_cmd.width, |
| 7997 | bpp); |
| 7998 | mode_cmd.pixel_format = drm_mode_legacy_fb_format(bpp, depth); |
| 7999 | |
| 8000 | return intel_framebuffer_create(dev, &mode_cmd, obj); |
| 8001 | } |
| 8002 | |
| 8003 | static struct drm_framebuffer * |
| 8004 | mode_fits_in_fbdev(struct drm_device *dev, |
| 8005 | struct drm_display_mode *mode) |
| 8006 | { |
| 8007 | #ifdef CONFIG_DRM_I915_FBDEV |
| 8008 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 8009 | struct drm_i915_gem_object *obj; |
| 8010 | struct drm_framebuffer *fb; |
| 8011 | |
| 8012 | if (!dev_priv->fbdev) |
| 8013 | return NULL; |
| 8014 | |
| 8015 | if (!dev_priv->fbdev->fb) |
| 8016 | return NULL; |
| 8017 | |
| 8018 | obj = dev_priv->fbdev->fb->obj; |
| 8019 | BUG_ON(!obj); |
| 8020 | |
| 8021 | fb = &dev_priv->fbdev->fb->base; |
| 8022 | if (fb->pitches[0] < intel_framebuffer_pitch_for_width(mode->hdisplay, |
| 8023 | fb->bits_per_pixel)) |
| 8024 | return NULL; |
| 8025 | |
| 8026 | if (obj->base.size < mode->vdisplay * fb->pitches[0]) |
| 8027 | return NULL; |
| 8028 | |
| 8029 | return fb; |
| 8030 | #else |
| 8031 | return NULL; |
| 8032 | #endif |
| 8033 | } |
| 8034 | |
| 8035 | bool intel_get_load_detect_pipe(struct drm_connector *connector, |
| 8036 | struct drm_display_mode *mode, |
| 8037 | struct intel_load_detect_pipe *old) |
| 8038 | { |
| 8039 | struct intel_crtc *intel_crtc; |
| 8040 | struct intel_encoder *intel_encoder = |
| 8041 | intel_attached_encoder(connector); |
| 8042 | struct drm_crtc *possible_crtc; |
| 8043 | struct drm_encoder *encoder = &intel_encoder->base; |
| 8044 | struct drm_crtc *crtc = NULL; |
| 8045 | struct drm_device *dev = encoder->dev; |
| 8046 | struct drm_framebuffer *fb; |
| 8047 | int i = -1; |
| 8048 | |
| 8049 | DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n", |
| 8050 | connector->base.id, drm_get_connector_name(connector), |
| 8051 | encoder->base.id, drm_get_encoder_name(encoder)); |
| 8052 | |
| 8053 | /* |
| 8054 | * Algorithm gets a little messy: |
| 8055 | * |
| 8056 | * - if the connector already has an assigned crtc, use it (but make |
| 8057 | * sure it's on first) |
| 8058 | * |
| 8059 | * - try to find the first unused crtc that can drive this connector, |
| 8060 | * and use that if we find one |
| 8061 | */ |
| 8062 | |
| 8063 | /* See if we already have a CRTC for this connector */ |
| 8064 | if (encoder->crtc) { |
| 8065 | crtc = encoder->crtc; |
| 8066 | |
| 8067 | mutex_lock(&crtc->mutex); |
| 8068 | |
| 8069 | old->dpms_mode = connector->dpms; |
| 8070 | old->load_detect_temp = false; |
| 8071 | |
| 8072 | /* Make sure the crtc and connector are running */ |
| 8073 | if (connector->dpms != DRM_MODE_DPMS_ON) |
| 8074 | connector->funcs->dpms(connector, DRM_MODE_DPMS_ON); |
| 8075 | |
| 8076 | return true; |
| 8077 | } |
| 8078 | |
| 8079 | /* Find an unused one (if possible) */ |
| 8080 | list_for_each_entry(possible_crtc, &dev->mode_config.crtc_list, head) { |
| 8081 | i++; |
| 8082 | if (!(encoder->possible_crtcs & (1 << i))) |
| 8083 | continue; |
| 8084 | if (!possible_crtc->enabled) { |
| 8085 | crtc = possible_crtc; |
| 8086 | break; |
| 8087 | } |
| 8088 | } |
| 8089 | |
| 8090 | /* |
| 8091 | * If we didn't find an unused CRTC, don't use any. |
| 8092 | */ |
| 8093 | if (!crtc) { |
| 8094 | DRM_DEBUG_KMS("no pipe available for load-detect\n"); |
| 8095 | return false; |
| 8096 | } |
| 8097 | |
| 8098 | mutex_lock(&crtc->mutex); |
| 8099 | intel_encoder->new_crtc = to_intel_crtc(crtc); |
| 8100 | to_intel_connector(connector)->new_encoder = intel_encoder; |
| 8101 | |
| 8102 | intel_crtc = to_intel_crtc(crtc); |
| 8103 | intel_crtc->new_enabled = true; |
| 8104 | intel_crtc->new_config = &intel_crtc->config; |
| 8105 | old->dpms_mode = connector->dpms; |
| 8106 | old->load_detect_temp = true; |
| 8107 | old->release_fb = NULL; |
| 8108 | |
| 8109 | if (!mode) |
| 8110 | mode = &load_detect_mode; |
| 8111 | |
| 8112 | /* We need a framebuffer large enough to accommodate all accesses |
| 8113 | * that the plane may generate whilst we perform load detection. |
| 8114 | * We can not rely on the fbcon either being present (we get called |
| 8115 | * during its initialisation to detect all boot displays, or it may |
| 8116 | * not even exist) or that it is large enough to satisfy the |
| 8117 | * requested mode. |
| 8118 | */ |
| 8119 | fb = mode_fits_in_fbdev(dev, mode); |
| 8120 | if (fb == NULL) { |
| 8121 | DRM_DEBUG_KMS("creating tmp fb for load-detection\n"); |
| 8122 | fb = intel_framebuffer_create_for_mode(dev, mode, 24, 32); |
| 8123 | old->release_fb = fb; |
| 8124 | } else |
| 8125 | DRM_DEBUG_KMS("reusing fbdev for load-detection framebuffer\n"); |
| 8126 | if (IS_ERR(fb)) { |
| 8127 | DRM_DEBUG_KMS("failed to allocate framebuffer for load-detection\n"); |
| 8128 | goto fail; |
| 8129 | } |
| 8130 | |
| 8131 | if (intel_set_mode(crtc, mode, 0, 0, fb)) { |
| 8132 | DRM_DEBUG_KMS("failed to set mode on load-detect pipe\n"); |
| 8133 | if (old->release_fb) |
| 8134 | old->release_fb->funcs->destroy(old->release_fb); |
| 8135 | goto fail; |
| 8136 | } |
| 8137 | |
| 8138 | /* let the connector get through one full cycle before testing */ |
| 8139 | intel_wait_for_vblank(dev, intel_crtc->pipe); |
| 8140 | return true; |
| 8141 | |
| 8142 | fail: |
| 8143 | intel_crtc->new_enabled = crtc->enabled; |
| 8144 | if (intel_crtc->new_enabled) |
| 8145 | intel_crtc->new_config = &intel_crtc->config; |
| 8146 | else |
| 8147 | intel_crtc->new_config = NULL; |
| 8148 | mutex_unlock(&crtc->mutex); |
| 8149 | return false; |
| 8150 | } |
| 8151 | |
| 8152 | void intel_release_load_detect_pipe(struct drm_connector *connector, |
| 8153 | struct intel_load_detect_pipe *old) |
| 8154 | { |
| 8155 | struct intel_encoder *intel_encoder = |
| 8156 | intel_attached_encoder(connector); |
| 8157 | struct drm_encoder *encoder = &intel_encoder->base; |
| 8158 | struct drm_crtc *crtc = encoder->crtc; |
| 8159 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 8160 | |
| 8161 | DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n", |
| 8162 | connector->base.id, drm_get_connector_name(connector), |
| 8163 | encoder->base.id, drm_get_encoder_name(encoder)); |
| 8164 | |
| 8165 | if (old->load_detect_temp) { |
| 8166 | to_intel_connector(connector)->new_encoder = NULL; |
| 8167 | intel_encoder->new_crtc = NULL; |
| 8168 | intel_crtc->new_enabled = false; |
| 8169 | intel_crtc->new_config = NULL; |
| 8170 | intel_set_mode(crtc, NULL, 0, 0, NULL); |
| 8171 | |
| 8172 | if (old->release_fb) { |
| 8173 | drm_framebuffer_unregister_private(old->release_fb); |
| 8174 | drm_framebuffer_unreference(old->release_fb); |
| 8175 | } |
| 8176 | |
| 8177 | mutex_unlock(&crtc->mutex); |
| 8178 | return; |
| 8179 | } |
| 8180 | |
| 8181 | /* Switch crtc and encoder back off if necessary */ |
| 8182 | if (old->dpms_mode != DRM_MODE_DPMS_ON) |
| 8183 | connector->funcs->dpms(connector, old->dpms_mode); |
| 8184 | |
| 8185 | mutex_unlock(&crtc->mutex); |
| 8186 | } |
| 8187 | |
| 8188 | static int i9xx_pll_refclk(struct drm_device *dev, |
| 8189 | const struct intel_crtc_config *pipe_config) |
| 8190 | { |
| 8191 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 8192 | u32 dpll = pipe_config->dpll_hw_state.dpll; |
| 8193 | |
| 8194 | if ((dpll & PLL_REF_INPUT_MASK) == PLLB_REF_INPUT_SPREADSPECTRUMIN) |
| 8195 | return dev_priv->vbt.lvds_ssc_freq; |
| 8196 | else if (HAS_PCH_SPLIT(dev)) |
| 8197 | return 120000; |
| 8198 | else if (!IS_GEN2(dev)) |
| 8199 | return 96000; |
| 8200 | else |
| 8201 | return 48000; |
| 8202 | } |
| 8203 | |
| 8204 | /* Returns the clock of the currently programmed mode of the given pipe. */ |
| 8205 | static void i9xx_crtc_clock_get(struct intel_crtc *crtc, |
| 8206 | struct intel_crtc_config *pipe_config) |
| 8207 | { |
| 8208 | struct drm_device *dev = crtc->base.dev; |
| 8209 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 8210 | int pipe = pipe_config->cpu_transcoder; |
| 8211 | u32 dpll = pipe_config->dpll_hw_state.dpll; |
| 8212 | u32 fp; |
| 8213 | intel_clock_t clock; |
| 8214 | int refclk = i9xx_pll_refclk(dev, pipe_config); |
| 8215 | |
| 8216 | if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0) |
| 8217 | fp = pipe_config->dpll_hw_state.fp0; |
| 8218 | else |
| 8219 | fp = pipe_config->dpll_hw_state.fp1; |
| 8220 | |
| 8221 | clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT; |
| 8222 | if (IS_PINEVIEW(dev)) { |
| 8223 | clock.n = ffs((fp & FP_N_PINEVIEW_DIV_MASK) >> FP_N_DIV_SHIFT) - 1; |
| 8224 | clock.m2 = (fp & FP_M2_PINEVIEW_DIV_MASK) >> FP_M2_DIV_SHIFT; |
| 8225 | } else { |
| 8226 | clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT; |
| 8227 | clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT; |
| 8228 | } |
| 8229 | |
| 8230 | if (!IS_GEN2(dev)) { |
| 8231 | if (IS_PINEVIEW(dev)) |
| 8232 | clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_PINEVIEW) >> |
| 8233 | DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW); |
| 8234 | else |
| 8235 | clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK) >> |
| 8236 | DPLL_FPA01_P1_POST_DIV_SHIFT); |
| 8237 | |
| 8238 | switch (dpll & DPLL_MODE_MASK) { |
| 8239 | case DPLLB_MODE_DAC_SERIAL: |
| 8240 | clock.p2 = dpll & DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 ? |
| 8241 | 5 : 10; |
| 8242 | break; |
| 8243 | case DPLLB_MODE_LVDS: |
| 8244 | clock.p2 = dpll & DPLLB_LVDS_P2_CLOCK_DIV_7 ? |
| 8245 | 7 : 14; |
| 8246 | break; |
| 8247 | default: |
| 8248 | DRM_DEBUG_KMS("Unknown DPLL mode %08x in programmed " |
| 8249 | "mode\n", (int)(dpll & DPLL_MODE_MASK)); |
| 8250 | return; |
| 8251 | } |
| 8252 | |
| 8253 | if (IS_PINEVIEW(dev)) |
| 8254 | pineview_clock(refclk, &clock); |
| 8255 | else |
| 8256 | i9xx_clock(refclk, &clock); |
| 8257 | } else { |
| 8258 | u32 lvds = IS_I830(dev) ? 0 : I915_READ(LVDS); |
| 8259 | bool is_lvds = (pipe == 1) && (lvds & LVDS_PORT_EN); |
| 8260 | |
| 8261 | if (is_lvds) { |
| 8262 | clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >> |
| 8263 | DPLL_FPA01_P1_POST_DIV_SHIFT); |
| 8264 | |
| 8265 | if (lvds & LVDS_CLKB_POWER_UP) |
| 8266 | clock.p2 = 7; |
| 8267 | else |
| 8268 | clock.p2 = 14; |
| 8269 | } else { |
| 8270 | if (dpll & PLL_P1_DIVIDE_BY_TWO) |
| 8271 | clock.p1 = 2; |
| 8272 | else { |
| 8273 | clock.p1 = ((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830) >> |
| 8274 | DPLL_FPA01_P1_POST_DIV_SHIFT) + 2; |
| 8275 | } |
| 8276 | if (dpll & PLL_P2_DIVIDE_BY_4) |
| 8277 | clock.p2 = 4; |
| 8278 | else |
| 8279 | clock.p2 = 2; |
| 8280 | } |
| 8281 | |
| 8282 | i9xx_clock(refclk, &clock); |
| 8283 | } |
| 8284 | |
| 8285 | /* |
| 8286 | * This value includes pixel_multiplier. We will use |
| 8287 | * port_clock to compute adjusted_mode.crtc_clock in the |
| 8288 | * encoder's get_config() function. |
| 8289 | */ |
| 8290 | pipe_config->port_clock = clock.dot; |
| 8291 | } |
| 8292 | |
| 8293 | int intel_dotclock_calculate(int link_freq, |
| 8294 | const struct intel_link_m_n *m_n) |
| 8295 | { |
| 8296 | /* |
| 8297 | * The calculation for the data clock is: |
| 8298 | * pixel_clock = ((m/n)*(link_clock * nr_lanes))/bpp |
| 8299 | * But we want to avoid losing precison if possible, so: |
| 8300 | * pixel_clock = ((m * link_clock * nr_lanes)/(n*bpp)) |
| 8301 | * |
| 8302 | * and the link clock is simpler: |
| 8303 | * link_clock = (m * link_clock) / n |
| 8304 | */ |
| 8305 | |
| 8306 | if (!m_n->link_n) |
| 8307 | return 0; |
| 8308 | |
| 8309 | return div_u64((u64)m_n->link_m * link_freq, m_n->link_n); |
| 8310 | } |
| 8311 | |
| 8312 | static void ironlake_pch_clock_get(struct intel_crtc *crtc, |
| 8313 | struct intel_crtc_config *pipe_config) |
| 8314 | { |
| 8315 | struct drm_device *dev = crtc->base.dev; |
| 8316 | |
| 8317 | /* read out port_clock from the DPLL */ |
| 8318 | i9xx_crtc_clock_get(crtc, pipe_config); |
| 8319 | |
| 8320 | /* |
| 8321 | * This value does not include pixel_multiplier. |
| 8322 | * We will check that port_clock and adjusted_mode.crtc_clock |
| 8323 | * agree once we know their relationship in the encoder's |
| 8324 | * get_config() function. |
| 8325 | */ |
| 8326 | pipe_config->adjusted_mode.crtc_clock = |
| 8327 | intel_dotclock_calculate(intel_fdi_link_freq(dev) * 10000, |
| 8328 | &pipe_config->fdi_m_n); |
| 8329 | } |
| 8330 | |
| 8331 | /** Returns the currently programmed mode of the given pipe. */ |
| 8332 | struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev, |
| 8333 | struct drm_crtc *crtc) |
| 8334 | { |
| 8335 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 8336 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 8337 | enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder; |
| 8338 | struct drm_display_mode *mode; |
| 8339 | struct intel_crtc_config pipe_config; |
| 8340 | int htot = I915_READ(HTOTAL(cpu_transcoder)); |
| 8341 | int hsync = I915_READ(HSYNC(cpu_transcoder)); |
| 8342 | int vtot = I915_READ(VTOTAL(cpu_transcoder)); |
| 8343 | int vsync = I915_READ(VSYNC(cpu_transcoder)); |
| 8344 | enum pipe pipe = intel_crtc->pipe; |
| 8345 | |
| 8346 | mode = kzalloc(sizeof(*mode), GFP_KERNEL); |
| 8347 | if (!mode) |
| 8348 | return NULL; |
| 8349 | |
| 8350 | /* |
| 8351 | * Construct a pipe_config sufficient for getting the clock info |
| 8352 | * back out of crtc_clock_get. |
| 8353 | * |
| 8354 | * Note, if LVDS ever uses a non-1 pixel multiplier, we'll need |
| 8355 | * to use a real value here instead. |
| 8356 | */ |
| 8357 | pipe_config.cpu_transcoder = (enum transcoder) pipe; |
| 8358 | pipe_config.pixel_multiplier = 1; |
| 8359 | pipe_config.dpll_hw_state.dpll = I915_READ(DPLL(pipe)); |
| 8360 | pipe_config.dpll_hw_state.fp0 = I915_READ(FP0(pipe)); |
| 8361 | pipe_config.dpll_hw_state.fp1 = I915_READ(FP1(pipe)); |
| 8362 | i9xx_crtc_clock_get(intel_crtc, &pipe_config); |
| 8363 | |
| 8364 | mode->clock = pipe_config.port_clock / pipe_config.pixel_multiplier; |
| 8365 | mode->hdisplay = (htot & 0xffff) + 1; |
| 8366 | mode->htotal = ((htot & 0xffff0000) >> 16) + 1; |
| 8367 | mode->hsync_start = (hsync & 0xffff) + 1; |
| 8368 | mode->hsync_end = ((hsync & 0xffff0000) >> 16) + 1; |
| 8369 | mode->vdisplay = (vtot & 0xffff) + 1; |
| 8370 | mode->vtotal = ((vtot & 0xffff0000) >> 16) + 1; |
| 8371 | mode->vsync_start = (vsync & 0xffff) + 1; |
| 8372 | mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1; |
| 8373 | |
| 8374 | drm_mode_set_name(mode); |
| 8375 | |
| 8376 | return mode; |
| 8377 | } |
| 8378 | |
| 8379 | static void intel_increase_pllclock(struct drm_crtc *crtc) |
| 8380 | { |
| 8381 | struct drm_device *dev = crtc->dev; |
| 8382 | drm_i915_private_t *dev_priv = dev->dev_private; |
| 8383 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 8384 | int pipe = intel_crtc->pipe; |
| 8385 | int dpll_reg = DPLL(pipe); |
| 8386 | int dpll; |
| 8387 | |
| 8388 | if (HAS_PCH_SPLIT(dev)) |
| 8389 | return; |
| 8390 | |
| 8391 | if (!dev_priv->lvds_downclock_avail) |
| 8392 | return; |
| 8393 | |
| 8394 | dpll = I915_READ(dpll_reg); |
| 8395 | if (!HAS_PIPE_CXSR(dev) && (dpll & DISPLAY_RATE_SELECT_FPA1)) { |
| 8396 | DRM_DEBUG_DRIVER("upclocking LVDS\n"); |
| 8397 | |
| 8398 | assert_panel_unlocked(dev_priv, pipe); |
| 8399 | |
| 8400 | dpll &= ~DISPLAY_RATE_SELECT_FPA1; |
| 8401 | I915_WRITE(dpll_reg, dpll); |
| 8402 | intel_wait_for_vblank(dev, pipe); |
| 8403 | |
| 8404 | dpll = I915_READ(dpll_reg); |
| 8405 | if (dpll & DISPLAY_RATE_SELECT_FPA1) |
| 8406 | DRM_DEBUG_DRIVER("failed to upclock LVDS!\n"); |
| 8407 | } |
| 8408 | } |
| 8409 | |
| 8410 | static void intel_decrease_pllclock(struct drm_crtc *crtc) |
| 8411 | { |
| 8412 | struct drm_device *dev = crtc->dev; |
| 8413 | drm_i915_private_t *dev_priv = dev->dev_private; |
| 8414 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 8415 | |
| 8416 | if (HAS_PCH_SPLIT(dev)) |
| 8417 | return; |
| 8418 | |
| 8419 | if (!dev_priv->lvds_downclock_avail) |
| 8420 | return; |
| 8421 | |
| 8422 | /* |
| 8423 | * Since this is called by a timer, we should never get here in |
| 8424 | * the manual case. |
| 8425 | */ |
| 8426 | if (!HAS_PIPE_CXSR(dev) && intel_crtc->lowfreq_avail) { |
| 8427 | int pipe = intel_crtc->pipe; |
| 8428 | int dpll_reg = DPLL(pipe); |
| 8429 | int dpll; |
| 8430 | |
| 8431 | DRM_DEBUG_DRIVER("downclocking LVDS\n"); |
| 8432 | |
| 8433 | assert_panel_unlocked(dev_priv, pipe); |
| 8434 | |
| 8435 | dpll = I915_READ(dpll_reg); |
| 8436 | dpll |= DISPLAY_RATE_SELECT_FPA1; |
| 8437 | I915_WRITE(dpll_reg, dpll); |
| 8438 | intel_wait_for_vblank(dev, pipe); |
| 8439 | dpll = I915_READ(dpll_reg); |
| 8440 | if (!(dpll & DISPLAY_RATE_SELECT_FPA1)) |
| 8441 | DRM_DEBUG_DRIVER("failed to downclock LVDS!\n"); |
| 8442 | } |
| 8443 | |
| 8444 | } |
| 8445 | |
| 8446 | void intel_mark_busy(struct drm_device *dev) |
| 8447 | { |
| 8448 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 8449 | |
| 8450 | if (dev_priv->mm.busy) |
| 8451 | return; |
| 8452 | |
| 8453 | hsw_disable_package_c8(dev_priv); |
| 8454 | i915_update_gfx_val(dev_priv); |
| 8455 | dev_priv->mm.busy = true; |
| 8456 | } |
| 8457 | |
| 8458 | void intel_mark_idle(struct drm_device *dev) |
| 8459 | { |
| 8460 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 8461 | struct drm_crtc *crtc; |
| 8462 | |
| 8463 | if (!dev_priv->mm.busy) |
| 8464 | return; |
| 8465 | |
| 8466 | dev_priv->mm.busy = false; |
| 8467 | |
| 8468 | if (!i915.powersave) |
| 8469 | goto out; |
| 8470 | |
| 8471 | list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { |
| 8472 | if (!crtc->fb) |
| 8473 | continue; |
| 8474 | |
| 8475 | intel_decrease_pllclock(crtc); |
| 8476 | } |
| 8477 | |
| 8478 | if (INTEL_INFO(dev)->gen >= 6) |
| 8479 | gen6_rps_idle(dev->dev_private); |
| 8480 | |
| 8481 | out: |
| 8482 | hsw_enable_package_c8(dev_priv); |
| 8483 | } |
| 8484 | |
| 8485 | void intel_mark_fb_busy(struct drm_i915_gem_object *obj, |
| 8486 | struct intel_ring_buffer *ring) |
| 8487 | { |
| 8488 | struct drm_device *dev = obj->base.dev; |
| 8489 | struct drm_crtc *crtc; |
| 8490 | |
| 8491 | if (!i915.powersave) |
| 8492 | return; |
| 8493 | |
| 8494 | list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { |
| 8495 | if (!crtc->fb) |
| 8496 | continue; |
| 8497 | |
| 8498 | if (to_intel_framebuffer(crtc->fb)->obj != obj) |
| 8499 | continue; |
| 8500 | |
| 8501 | intel_increase_pllclock(crtc); |
| 8502 | if (ring && intel_fbc_enabled(dev)) |
| 8503 | ring->fbc_dirty = true; |
| 8504 | } |
| 8505 | } |
| 8506 | |
| 8507 | static void intel_crtc_destroy(struct drm_crtc *crtc) |
| 8508 | { |
| 8509 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 8510 | struct drm_device *dev = crtc->dev; |
| 8511 | struct intel_unpin_work *work; |
| 8512 | unsigned long flags; |
| 8513 | |
| 8514 | spin_lock_irqsave(&dev->event_lock, flags); |
| 8515 | work = intel_crtc->unpin_work; |
| 8516 | intel_crtc->unpin_work = NULL; |
| 8517 | spin_unlock_irqrestore(&dev->event_lock, flags); |
| 8518 | |
| 8519 | if (work) { |
| 8520 | cancel_work_sync(&work->work); |
| 8521 | kfree(work); |
| 8522 | } |
| 8523 | |
| 8524 | intel_crtc_cursor_set(crtc, NULL, 0, 0, 0); |
| 8525 | |
| 8526 | drm_crtc_cleanup(crtc); |
| 8527 | |
| 8528 | kfree(intel_crtc); |
| 8529 | } |
| 8530 | |
| 8531 | static void intel_unpin_work_fn(struct work_struct *__work) |
| 8532 | { |
| 8533 | struct intel_unpin_work *work = |
| 8534 | container_of(__work, struct intel_unpin_work, work); |
| 8535 | struct drm_device *dev = work->crtc->dev; |
| 8536 | |
| 8537 | mutex_lock(&dev->struct_mutex); |
| 8538 | intel_unpin_fb_obj(work->old_fb_obj); |
| 8539 | drm_gem_object_unreference(&work->pending_flip_obj->base); |
| 8540 | drm_gem_object_unreference(&work->old_fb_obj->base); |
| 8541 | |
| 8542 | intel_update_fbc(dev); |
| 8543 | mutex_unlock(&dev->struct_mutex); |
| 8544 | |
| 8545 | BUG_ON(atomic_read(&to_intel_crtc(work->crtc)->unpin_work_count) == 0); |
| 8546 | atomic_dec(&to_intel_crtc(work->crtc)->unpin_work_count); |
| 8547 | |
| 8548 | kfree(work); |
| 8549 | } |
| 8550 | |
| 8551 | static void do_intel_finish_page_flip(struct drm_device *dev, |
| 8552 | struct drm_crtc *crtc) |
| 8553 | { |
| 8554 | drm_i915_private_t *dev_priv = dev->dev_private; |
| 8555 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 8556 | struct intel_unpin_work *work; |
| 8557 | unsigned long flags; |
| 8558 | |
| 8559 | /* Ignore early vblank irqs */ |
| 8560 | if (intel_crtc == NULL) |
| 8561 | return; |
| 8562 | |
| 8563 | spin_lock_irqsave(&dev->event_lock, flags); |
| 8564 | work = intel_crtc->unpin_work; |
| 8565 | |
| 8566 | /* Ensure we don't miss a work->pending update ... */ |
| 8567 | smp_rmb(); |
| 8568 | |
| 8569 | if (work == NULL || atomic_read(&work->pending) < INTEL_FLIP_COMPLETE) { |
| 8570 | spin_unlock_irqrestore(&dev->event_lock, flags); |
| 8571 | return; |
| 8572 | } |
| 8573 | |
| 8574 | /* and that the unpin work is consistent wrt ->pending. */ |
| 8575 | smp_rmb(); |
| 8576 | |
| 8577 | intel_crtc->unpin_work = NULL; |
| 8578 | |
| 8579 | if (work->event) |
| 8580 | drm_send_vblank_event(dev, intel_crtc->pipe, work->event); |
| 8581 | |
| 8582 | drm_vblank_put(dev, intel_crtc->pipe); |
| 8583 | |
| 8584 | spin_unlock_irqrestore(&dev->event_lock, flags); |
| 8585 | |
| 8586 | wake_up_all(&dev_priv->pending_flip_queue); |
| 8587 | |
| 8588 | queue_work(dev_priv->wq, &work->work); |
| 8589 | |
| 8590 | trace_i915_flip_complete(intel_crtc->plane, work->pending_flip_obj); |
| 8591 | } |
| 8592 | |
| 8593 | void intel_finish_page_flip(struct drm_device *dev, int pipe) |
| 8594 | { |
| 8595 | drm_i915_private_t *dev_priv = dev->dev_private; |
| 8596 | struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe]; |
| 8597 | |
| 8598 | do_intel_finish_page_flip(dev, crtc); |
| 8599 | } |
| 8600 | |
| 8601 | void intel_finish_page_flip_plane(struct drm_device *dev, int plane) |
| 8602 | { |
| 8603 | drm_i915_private_t *dev_priv = dev->dev_private; |
| 8604 | struct drm_crtc *crtc = dev_priv->plane_to_crtc_mapping[plane]; |
| 8605 | |
| 8606 | do_intel_finish_page_flip(dev, crtc); |
| 8607 | } |
| 8608 | |
| 8609 | void intel_prepare_page_flip(struct drm_device *dev, int plane) |
| 8610 | { |
| 8611 | drm_i915_private_t *dev_priv = dev->dev_private; |
| 8612 | struct intel_crtc *intel_crtc = |
| 8613 | to_intel_crtc(dev_priv->plane_to_crtc_mapping[plane]); |
| 8614 | unsigned long flags; |
| 8615 | |
| 8616 | /* NB: An MMIO update of the plane base pointer will also |
| 8617 | * generate a page-flip completion irq, i.e. every modeset |
| 8618 | * is also accompanied by a spurious intel_prepare_page_flip(). |
| 8619 | */ |
| 8620 | spin_lock_irqsave(&dev->event_lock, flags); |
| 8621 | if (intel_crtc->unpin_work) |
| 8622 | atomic_inc_not_zero(&intel_crtc->unpin_work->pending); |
| 8623 | spin_unlock_irqrestore(&dev->event_lock, flags); |
| 8624 | } |
| 8625 | |
| 8626 | inline static void intel_mark_page_flip_active(struct intel_crtc *intel_crtc) |
| 8627 | { |
| 8628 | /* Ensure that the work item is consistent when activating it ... */ |
| 8629 | smp_wmb(); |
| 8630 | atomic_set(&intel_crtc->unpin_work->pending, INTEL_FLIP_PENDING); |
| 8631 | /* and that it is marked active as soon as the irq could fire. */ |
| 8632 | smp_wmb(); |
| 8633 | } |
| 8634 | |
| 8635 | static int intel_gen2_queue_flip(struct drm_device *dev, |
| 8636 | struct drm_crtc *crtc, |
| 8637 | struct drm_framebuffer *fb, |
| 8638 | struct drm_i915_gem_object *obj, |
| 8639 | uint32_t flags) |
| 8640 | { |
| 8641 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 8642 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 8643 | u32 flip_mask; |
| 8644 | struct intel_ring_buffer *ring = &dev_priv->ring[RCS]; |
| 8645 | int ret; |
| 8646 | |
| 8647 | ret = intel_pin_and_fence_fb_obj(dev, obj, ring); |
| 8648 | if (ret) |
| 8649 | goto err; |
| 8650 | |
| 8651 | ret = intel_ring_begin(ring, 6); |
| 8652 | if (ret) |
| 8653 | goto err_unpin; |
| 8654 | |
| 8655 | /* Can't queue multiple flips, so wait for the previous |
| 8656 | * one to finish before executing the next. |
| 8657 | */ |
| 8658 | if (intel_crtc->plane) |
| 8659 | flip_mask = MI_WAIT_FOR_PLANE_B_FLIP; |
| 8660 | else |
| 8661 | flip_mask = MI_WAIT_FOR_PLANE_A_FLIP; |
| 8662 | intel_ring_emit(ring, MI_WAIT_FOR_EVENT | flip_mask); |
| 8663 | intel_ring_emit(ring, MI_NOOP); |
| 8664 | intel_ring_emit(ring, MI_DISPLAY_FLIP | |
| 8665 | MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); |
| 8666 | intel_ring_emit(ring, fb->pitches[0]); |
| 8667 | intel_ring_emit(ring, i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset); |
| 8668 | intel_ring_emit(ring, 0); /* aux display base address, unused */ |
| 8669 | |
| 8670 | intel_mark_page_flip_active(intel_crtc); |
| 8671 | __intel_ring_advance(ring); |
| 8672 | return 0; |
| 8673 | |
| 8674 | err_unpin: |
| 8675 | intel_unpin_fb_obj(obj); |
| 8676 | err: |
| 8677 | return ret; |
| 8678 | } |
| 8679 | |
| 8680 | static int intel_gen3_queue_flip(struct drm_device *dev, |
| 8681 | struct drm_crtc *crtc, |
| 8682 | struct drm_framebuffer *fb, |
| 8683 | struct drm_i915_gem_object *obj, |
| 8684 | uint32_t flags) |
| 8685 | { |
| 8686 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 8687 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 8688 | u32 flip_mask; |
| 8689 | struct intel_ring_buffer *ring = &dev_priv->ring[RCS]; |
| 8690 | int ret; |
| 8691 | |
| 8692 | ret = intel_pin_and_fence_fb_obj(dev, obj, ring); |
| 8693 | if (ret) |
| 8694 | goto err; |
| 8695 | |
| 8696 | ret = intel_ring_begin(ring, 6); |
| 8697 | if (ret) |
| 8698 | goto err_unpin; |
| 8699 | |
| 8700 | if (intel_crtc->plane) |
| 8701 | flip_mask = MI_WAIT_FOR_PLANE_B_FLIP; |
| 8702 | else |
| 8703 | flip_mask = MI_WAIT_FOR_PLANE_A_FLIP; |
| 8704 | intel_ring_emit(ring, MI_WAIT_FOR_EVENT | flip_mask); |
| 8705 | intel_ring_emit(ring, MI_NOOP); |
| 8706 | intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 | |
| 8707 | MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); |
| 8708 | intel_ring_emit(ring, fb->pitches[0]); |
| 8709 | intel_ring_emit(ring, i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset); |
| 8710 | intel_ring_emit(ring, MI_NOOP); |
| 8711 | |
| 8712 | intel_mark_page_flip_active(intel_crtc); |
| 8713 | __intel_ring_advance(ring); |
| 8714 | return 0; |
| 8715 | |
| 8716 | err_unpin: |
| 8717 | intel_unpin_fb_obj(obj); |
| 8718 | err: |
| 8719 | return ret; |
| 8720 | } |
| 8721 | |
| 8722 | static int intel_gen4_queue_flip(struct drm_device *dev, |
| 8723 | struct drm_crtc *crtc, |
| 8724 | struct drm_framebuffer *fb, |
| 8725 | struct drm_i915_gem_object *obj, |
| 8726 | uint32_t flags) |
| 8727 | { |
| 8728 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 8729 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 8730 | uint32_t pf, pipesrc; |
| 8731 | struct intel_ring_buffer *ring = &dev_priv->ring[RCS]; |
| 8732 | int ret; |
| 8733 | |
| 8734 | ret = intel_pin_and_fence_fb_obj(dev, obj, ring); |
| 8735 | if (ret) |
| 8736 | goto err; |
| 8737 | |
| 8738 | ret = intel_ring_begin(ring, 4); |
| 8739 | if (ret) |
| 8740 | goto err_unpin; |
| 8741 | |
| 8742 | /* i965+ uses the linear or tiled offsets from the |
| 8743 | * Display Registers (which do not change across a page-flip) |
| 8744 | * so we need only reprogram the base address. |
| 8745 | */ |
| 8746 | intel_ring_emit(ring, MI_DISPLAY_FLIP | |
| 8747 | MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); |
| 8748 | intel_ring_emit(ring, fb->pitches[0]); |
| 8749 | intel_ring_emit(ring, |
| 8750 | (i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset) | |
| 8751 | obj->tiling_mode); |
| 8752 | |
| 8753 | /* XXX Enabling the panel-fitter across page-flip is so far |
| 8754 | * untested on non-native modes, so ignore it for now. |
| 8755 | * pf = I915_READ(pipe == 0 ? PFA_CTL_1 : PFB_CTL_1) & PF_ENABLE; |
| 8756 | */ |
| 8757 | pf = 0; |
| 8758 | pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff; |
| 8759 | intel_ring_emit(ring, pf | pipesrc); |
| 8760 | |
| 8761 | intel_mark_page_flip_active(intel_crtc); |
| 8762 | __intel_ring_advance(ring); |
| 8763 | return 0; |
| 8764 | |
| 8765 | err_unpin: |
| 8766 | intel_unpin_fb_obj(obj); |
| 8767 | err: |
| 8768 | return ret; |
| 8769 | } |
| 8770 | |
| 8771 | static int intel_gen6_queue_flip(struct drm_device *dev, |
| 8772 | struct drm_crtc *crtc, |
| 8773 | struct drm_framebuffer *fb, |
| 8774 | struct drm_i915_gem_object *obj, |
| 8775 | uint32_t flags) |
| 8776 | { |
| 8777 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 8778 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 8779 | struct intel_ring_buffer *ring = &dev_priv->ring[RCS]; |
| 8780 | uint32_t pf, pipesrc; |
| 8781 | int ret; |
| 8782 | |
| 8783 | ret = intel_pin_and_fence_fb_obj(dev, obj, ring); |
| 8784 | if (ret) |
| 8785 | goto err; |
| 8786 | |
| 8787 | ret = intel_ring_begin(ring, 4); |
| 8788 | if (ret) |
| 8789 | goto err_unpin; |
| 8790 | |
| 8791 | intel_ring_emit(ring, MI_DISPLAY_FLIP | |
| 8792 | MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); |
| 8793 | intel_ring_emit(ring, fb->pitches[0] | obj->tiling_mode); |
| 8794 | intel_ring_emit(ring, i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset); |
| 8795 | |
| 8796 | /* Contrary to the suggestions in the documentation, |
| 8797 | * "Enable Panel Fitter" does not seem to be required when page |
| 8798 | * flipping with a non-native mode, and worse causes a normal |
| 8799 | * modeset to fail. |
| 8800 | * pf = I915_READ(PF_CTL(intel_crtc->pipe)) & PF_ENABLE; |
| 8801 | */ |
| 8802 | pf = 0; |
| 8803 | pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff; |
| 8804 | intel_ring_emit(ring, pf | pipesrc); |
| 8805 | |
| 8806 | intel_mark_page_flip_active(intel_crtc); |
| 8807 | __intel_ring_advance(ring); |
| 8808 | return 0; |
| 8809 | |
| 8810 | err_unpin: |
| 8811 | intel_unpin_fb_obj(obj); |
| 8812 | err: |
| 8813 | return ret; |
| 8814 | } |
| 8815 | |
| 8816 | static int intel_gen7_queue_flip(struct drm_device *dev, |
| 8817 | struct drm_crtc *crtc, |
| 8818 | struct drm_framebuffer *fb, |
| 8819 | struct drm_i915_gem_object *obj, |
| 8820 | uint32_t flags) |
| 8821 | { |
| 8822 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 8823 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 8824 | struct intel_ring_buffer *ring; |
| 8825 | uint32_t plane_bit = 0; |
| 8826 | int len, ret; |
| 8827 | |
| 8828 | ring = obj->ring; |
| 8829 | if (IS_VALLEYVIEW(dev) || ring == NULL || ring->id != RCS) |
| 8830 | ring = &dev_priv->ring[BCS]; |
| 8831 | |
| 8832 | ret = intel_pin_and_fence_fb_obj(dev, obj, ring); |
| 8833 | if (ret) |
| 8834 | goto err; |
| 8835 | |
| 8836 | switch(intel_crtc->plane) { |
| 8837 | case PLANE_A: |
| 8838 | plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_A; |
| 8839 | break; |
| 8840 | case PLANE_B: |
| 8841 | plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_B; |
| 8842 | break; |
| 8843 | case PLANE_C: |
| 8844 | plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_C; |
| 8845 | break; |
| 8846 | default: |
| 8847 | WARN_ONCE(1, "unknown plane in flip command\n"); |
| 8848 | ret = -ENODEV; |
| 8849 | goto err_unpin; |
| 8850 | } |
| 8851 | |
| 8852 | len = 4; |
| 8853 | if (ring->id == RCS) |
| 8854 | len += 6; |
| 8855 | |
| 8856 | ret = intel_ring_begin(ring, len); |
| 8857 | if (ret) |
| 8858 | goto err_unpin; |
| 8859 | |
| 8860 | /* Unmask the flip-done completion message. Note that the bspec says that |
| 8861 | * we should do this for both the BCS and RCS, and that we must not unmask |
| 8862 | * more than one flip event at any time (or ensure that one flip message |
| 8863 | * can be sent by waiting for flip-done prior to queueing new flips). |
| 8864 | * Experimentation says that BCS works despite DERRMR masking all |
| 8865 | * flip-done completion events and that unmasking all planes at once |
| 8866 | * for the RCS also doesn't appear to drop events. Setting the DERRMR |
| 8867 | * to zero does lead to lockups within MI_DISPLAY_FLIP. |
| 8868 | */ |
| 8869 | if (ring->id == RCS) { |
| 8870 | intel_ring_emit(ring, MI_LOAD_REGISTER_IMM(1)); |
| 8871 | intel_ring_emit(ring, DERRMR); |
| 8872 | intel_ring_emit(ring, ~(DERRMR_PIPEA_PRI_FLIP_DONE | |
| 8873 | DERRMR_PIPEB_PRI_FLIP_DONE | |
| 8874 | DERRMR_PIPEC_PRI_FLIP_DONE)); |
| 8875 | intel_ring_emit(ring, MI_STORE_REGISTER_MEM(1) | |
| 8876 | MI_SRM_LRM_GLOBAL_GTT); |
| 8877 | intel_ring_emit(ring, DERRMR); |
| 8878 | intel_ring_emit(ring, ring->scratch.gtt_offset + 256); |
| 8879 | } |
| 8880 | |
| 8881 | intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 | plane_bit); |
| 8882 | intel_ring_emit(ring, (fb->pitches[0] | obj->tiling_mode)); |
| 8883 | intel_ring_emit(ring, i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset); |
| 8884 | intel_ring_emit(ring, (MI_NOOP)); |
| 8885 | |
| 8886 | intel_mark_page_flip_active(intel_crtc); |
| 8887 | __intel_ring_advance(ring); |
| 8888 | return 0; |
| 8889 | |
| 8890 | err_unpin: |
| 8891 | intel_unpin_fb_obj(obj); |
| 8892 | err: |
| 8893 | return ret; |
| 8894 | } |
| 8895 | |
| 8896 | static int intel_default_queue_flip(struct drm_device *dev, |
| 8897 | struct drm_crtc *crtc, |
| 8898 | struct drm_framebuffer *fb, |
| 8899 | struct drm_i915_gem_object *obj, |
| 8900 | uint32_t flags) |
| 8901 | { |
| 8902 | return -ENODEV; |
| 8903 | } |
| 8904 | |
| 8905 | static int intel_crtc_page_flip(struct drm_crtc *crtc, |
| 8906 | struct drm_framebuffer *fb, |
| 8907 | struct drm_pending_vblank_event *event, |
| 8908 | uint32_t page_flip_flags) |
| 8909 | { |
| 8910 | struct drm_device *dev = crtc->dev; |
| 8911 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 8912 | struct drm_framebuffer *old_fb = crtc->fb; |
| 8913 | struct drm_i915_gem_object *obj = to_intel_framebuffer(fb)->obj; |
| 8914 | struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| 8915 | struct intel_unpin_work *work; |
| 8916 | unsigned long flags; |
| 8917 | int ret; |
| 8918 | |
| 8919 | /* Can't change pixel format via MI display flips. */ |
| 8920 | if (fb->pixel_format != crtc->fb->pixel_format) |
| 8921 | return -EINVAL; |
| 8922 | |
| 8923 | /* |
| 8924 | * TILEOFF/LINOFF registers can't be changed via MI display flips. |
| 8925 | * Note that pitch changes could also affect these register. |
| 8926 | */ |
| 8927 | if (INTEL_INFO(dev)->gen > 3 && |
| 8928 | (fb->offsets[0] != crtc->fb->offsets[0] || |
| 8929 | fb->pitches[0] != crtc->fb->pitches[0])) |
| 8930 | return -EINVAL; |
| 8931 | |
| 8932 | if (i915_terminally_wedged(&dev_priv->gpu_error)) |
| 8933 | goto out_hang; |
| 8934 | |
| 8935 | work = kzalloc(sizeof(*work), GFP_KERNEL); |
| 8936 | if (work == NULL) |
| 8937 | return -ENOMEM; |
| 8938 | |
| 8939 | work->event = event; |
| 8940 | work->crtc = crtc; |
| 8941 | work->old_fb_obj = to_intel_framebuffer(old_fb)->obj; |
| 8942 | INIT_WORK(&work->work, intel_unpin_work_fn); |
| 8943 | |
| 8944 | ret = drm_vblank_get(dev, intel_crtc->pipe); |
| 8945 | if (ret) |
| 8946 | goto free_work; |
| 8947 | |
| 8948 | /* We borrow the event spin lock for protecting unpin_work */ |
| 8949 | spin_lock_irqsave(&dev->event_lock, flags); |
| 8950 | if (intel_crtc->unpin_work) { |
| 8951 | spin_unlock_irqrestore(&dev->event_lock, flags); |
| 8952 | kfree(work); |
| 8953 | drm_vblank_put(dev, intel_crtc->pipe); |
| 8954 | |
| 8955 | DRM_DEBUG_DRIVER("flip queue: crtc already busy\n"); |
| 8956 | return -EBUSY; |
| 8957 | } |
| 8958 | intel_crtc->unpin_work = work; |
| 8959 | spin_unlock_irqrestore(&dev->event_lock, flags); |
| 8960 | |
| 8961 | if (atomic_read(&intel_crtc->unpin_work_count) >= 2) |
| 8962 | flush_workqueue(dev_priv->wq); |
| 8963 | |
| 8964 | ret = i915_mutex_lock_interruptible(dev); |
| 8965 | if (ret) |
| 8966 | goto cleanup; |
| 8967 | |
| 8968 | /* Reference the objects for the scheduled work. */ |
| 8969 | drm_gem_object_reference(&work->old_fb_obj->base); |
| 8970 | drm_gem_object_reference(&obj->base); |
| 8971 | |
| 8972 | crtc->fb = fb; |
| 8973 | |
| 8974 | work->pending_flip_obj = obj; |
| 8975 | |
| 8976 | work->enable_stall_check = true; |
| 8977 | |
| 8978 | atomic_inc(&intel_crtc->unpin_work_count); |
| 8979 | intel_crtc->reset_counter = atomic_read(&dev_priv->gpu_error.reset_counter); |
| 8980 | |
| 8981 | ret = dev_priv->display.queue_flip(dev, crtc, fb, obj, page_flip_flags); |
| 8982 | if (ret) |
| 8983 | goto cleanup_pending; |
| 8984 | |
| 8985 | intel_disable_fbc(dev); |
| 8986 | intel_mark_fb_busy(obj, NULL); |
| 8987 | mutex_unlock(&dev->struct_mutex); |
| 8988 | |
| 8989 | trace_i915_flip_request(intel_crtc->plane, obj); |
| 8990 | |
| 8991 | return 0; |
| 8992 | |
| 8993 | cleanup_pending: |
| 8994 | atomic_dec(&intel_crtc->unpin_work_count); |
| 8995 | crtc->fb = old_fb; |
| 8996 | drm_gem_object_unreference(&work->old_fb_obj->base); |
| 8997 | drm_gem_object_unreference(&obj->base); |
| 8998 | mutex_unlock(&dev->struct_mutex); |
| 8999 | |
| 9000 | cleanup: |
| 9001 | spin_lock_irqsave(&dev->event_lock, flags); |
| 9002 | intel_crtc->unpin_work = NULL; |
| 9003 | spin_unlock_irqrestore(&dev->event_lock, flags); |
| 9004 | |
| 9005 | drm_vblank_put(dev, intel_crtc->pipe); |
| 9006 | free_work: |
| 9007 | kfree(work); |
| 9008 | |
| 9009 | if (ret == -EIO) { |
| 9010 | out_hang: |
| 9011 | intel_crtc_wait_for_pending_flips(crtc); |
| 9012 | ret = intel_pipe_set_base(crtc, crtc->x, crtc->y, fb); |
| 9013 | if (ret == 0 && event) |
| 9014 | drm_send_vblank_event(dev, intel_crtc->pipe, event); |
| 9015 | } |
| 9016 | return ret; |
| 9017 | } |
| 9018 | |
| 9019 | static struct drm_crtc_helper_funcs intel_helper_funcs = { |
| 9020 | .mode_set_base_atomic = intel_pipe_set_base_atomic, |
| 9021 | .load_lut = intel_crtc_load_lut, |
| 9022 | }; |
| 9023 | |
| 9024 | /** |
| 9025 | * intel_modeset_update_staged_output_state |
| 9026 | * |
| 9027 | * Updates the staged output configuration state, e.g. after we've read out the |
| 9028 | * current hw state. |
| 9029 | */ |
| 9030 | static void intel_modeset_update_staged_output_state(struct drm_device *dev) |
| 9031 | { |
| 9032 | struct intel_crtc *crtc; |
| 9033 | struct intel_encoder *encoder; |
| 9034 | struct intel_connector *connector; |
| 9035 | |
| 9036 | list_for_each_entry(connector, &dev->mode_config.connector_list, |
| 9037 | base.head) { |
| 9038 | connector->new_encoder = |
| 9039 | to_intel_encoder(connector->base.encoder); |
| 9040 | } |
| 9041 | |
| 9042 | list_for_each_entry(encoder, &dev->mode_config.encoder_list, |
| 9043 | base.head) { |
| 9044 | encoder->new_crtc = |
| 9045 | to_intel_crtc(encoder->base.crtc); |
| 9046 | } |
| 9047 | |
| 9048 | list_for_each_entry(crtc, &dev->mode_config.crtc_list, |
| 9049 | base.head) { |
| 9050 | crtc->new_enabled = crtc->base.enabled; |
| 9051 | |
| 9052 | if (crtc->new_enabled) |
| 9053 | crtc->new_config = &crtc->config; |
| 9054 | else |
| 9055 | crtc->new_config = NULL; |
| 9056 | } |
| 9057 | } |
| 9058 | |
| 9059 | /** |
| 9060 | * intel_modeset_commit_output_state |
| 9061 | * |
| 9062 | * This function copies the stage display pipe configuration to the real one. |
| 9063 | */ |
| 9064 | static void intel_modeset_commit_output_state(struct drm_device *dev) |
| 9065 | { |
| 9066 | struct intel_crtc *crtc; |
| 9067 | struct intel_encoder *encoder; |
| 9068 | struct intel_connector *connector; |
| 9069 | |
| 9070 | list_for_each_entry(connector, &dev->mode_config.connector_list, |
| 9071 | base.head) { |
| 9072 | connector->base.encoder = &connector->new_encoder->base; |
| 9073 | } |
| 9074 | |
| 9075 | list_for_each_entry(encoder, &dev->mode_config.encoder_list, |
| 9076 | base.head) { |
| 9077 | encoder->base.crtc = &encoder->new_crtc->base; |
| 9078 | } |
| 9079 | |
| 9080 | list_for_each_entry(crtc, &dev->mode_config.crtc_list, |
| 9081 | base.head) { |
| 9082 | crtc->base.enabled = crtc->new_enabled; |
| 9083 | } |
| 9084 | } |
| 9085 | |
| 9086 | static void |
| 9087 | connected_sink_compute_bpp(struct intel_connector * connector, |
| 9088 | struct intel_crtc_config *pipe_config) |
| 9089 | { |
| 9090 | int bpp = pipe_config->pipe_bpp; |
| 9091 | |
| 9092 | DRM_DEBUG_KMS("[CONNECTOR:%d:%s] checking for sink bpp constrains\n", |
| 9093 | connector->base.base.id, |
| 9094 | drm_get_connector_name(&connector->base)); |
| 9095 | |
| 9096 | /* Don't use an invalid EDID bpc value */ |
| 9097 | if (connector->base.display_info.bpc && |
| 9098 | connector->base.display_info.bpc * 3 < bpp) { |
| 9099 | DRM_DEBUG_KMS("clamping display bpp (was %d) to EDID reported max of %d\n", |
| 9100 | bpp, connector->base.display_info.bpc*3); |
| 9101 | pipe_config->pipe_bpp = connector->base.display_info.bpc*3; |
| 9102 | } |
| 9103 | |
| 9104 | /* Clamp bpp to 8 on screens without EDID 1.4 */ |
| 9105 | if (connector->base.display_info.bpc == 0 && bpp > 24) { |
| 9106 | DRM_DEBUG_KMS("clamping display bpp (was %d) to default limit of 24\n", |
| 9107 | bpp); |
| 9108 | pipe_config->pipe_bpp = 24; |
| 9109 | } |
| 9110 | } |
| 9111 | |
| 9112 | static int |
| 9113 | compute_baseline_pipe_bpp(struct intel_crtc *crtc, |
| 9114 | struct drm_framebuffer *fb, |
| 9115 | struct intel_crtc_config *pipe_config) |
| 9116 | { |
| 9117 | struct drm_device *dev = crtc->base.dev; |
| 9118 | struct intel_connector *connector; |
| 9119 | int bpp; |
| 9120 | |
| 9121 | switch (fb->pixel_format) { |
| 9122 | case DRM_FORMAT_C8: |
| 9123 | bpp = 8*3; /* since we go through a colormap */ |
| 9124 | break; |
| 9125 | case DRM_FORMAT_XRGB1555: |
| 9126 | case DRM_FORMAT_ARGB1555: |
| 9127 | /* checked in intel_framebuffer_init already */ |
| 9128 | if (WARN_ON(INTEL_INFO(dev)->gen > 3)) |
| 9129 | return -EINVAL; |
| 9130 | case DRM_FORMAT_RGB565: |
| 9131 | bpp = 6*3; /* min is 18bpp */ |
| 9132 | break; |
| 9133 | case DRM_FORMAT_XBGR8888: |
| 9134 | case DRM_FORMAT_ABGR8888: |
| 9135 | /* checked in intel_framebuffer_init already */ |
| 9136 | if (WARN_ON(INTEL_INFO(dev)->gen < 4)) |
| 9137 | return -EINVAL; |
| 9138 | case DRM_FORMAT_XRGB8888: |
| 9139 | case DRM_FORMAT_ARGB8888: |
| 9140 | bpp = 8*3; |
| 9141 | break; |
| 9142 | case DRM_FORMAT_XRGB2101010: |
| 9143 | case DRM_FORMAT_ARGB2101010: |
| 9144 | case DRM_FORMAT_XBGR2101010: |
| 9145 | case DRM_FORMAT_ABGR2101010: |
| 9146 | /* checked in intel_framebuffer_init already */ |
| 9147 | if (WARN_ON(INTEL_INFO(dev)->gen < 4)) |
| 9148 | return -EINVAL; |
| 9149 | bpp = 10*3; |
| 9150 | break; |
| 9151 | /* TODO: gen4+ supports 16 bpc floating point, too. */ |
| 9152 | default: |
| 9153 | DRM_DEBUG_KMS("unsupported depth\n"); |
| 9154 | return -EINVAL; |
| 9155 | } |
| 9156 | |
| 9157 | pipe_config->pipe_bpp = bpp; |
| 9158 | |
| 9159 | /* Clamp display bpp to EDID value */ |
| 9160 | list_for_each_entry(connector, &dev->mode_config.connector_list, |
| 9161 | base.head) { |
| 9162 | if (!connector->new_encoder || |
| 9163 | connector->new_encoder->new_crtc != crtc) |
| 9164 | continue; |
| 9165 | |
| 9166 | connected_sink_compute_bpp(connector, pipe_config); |
| 9167 | } |
| 9168 | |
| 9169 | return bpp; |
| 9170 | } |
| 9171 | |
| 9172 | static void intel_dump_crtc_timings(const struct drm_display_mode *mode) |
| 9173 | { |
| 9174 | DRM_DEBUG_KMS("crtc timings: %d %d %d %d %d %d %d %d %d, " |
| 9175 | "type: 0x%x flags: 0x%x\n", |
| 9176 | mode->crtc_clock, |
| 9177 | mode->crtc_hdisplay, mode->crtc_hsync_start, |
| 9178 | mode->crtc_hsync_end, mode->crtc_htotal, |
| 9179 | mode->crtc_vdisplay, mode->crtc_vsync_start, |
| 9180 | mode->crtc_vsync_end, mode->crtc_vtotal, mode->type, mode->flags); |
| 9181 | } |
| 9182 | |
| 9183 | static void intel_dump_pipe_config(struct intel_crtc *crtc, |
| 9184 | struct intel_crtc_config *pipe_config, |
| 9185 | const char *context) |
| 9186 | { |
| 9187 | DRM_DEBUG_KMS("[CRTC:%d]%s config for pipe %c\n", crtc->base.base.id, |
| 9188 | context, pipe_name(crtc->pipe)); |
| 9189 | |
| 9190 | DRM_DEBUG_KMS("cpu_transcoder: %c\n", transcoder_name(pipe_config->cpu_transcoder)); |
| 9191 | DRM_DEBUG_KMS("pipe bpp: %i, dithering: %i\n", |
| 9192 | pipe_config->pipe_bpp, pipe_config->dither); |
| 9193 | DRM_DEBUG_KMS("fdi/pch: %i, lanes: %i, gmch_m: %u, gmch_n: %u, link_m: %u, link_n: %u, tu: %u\n", |
| 9194 | pipe_config->has_pch_encoder, |
| 9195 | pipe_config->fdi_lanes, |
| 9196 | pipe_config->fdi_m_n.gmch_m, pipe_config->fdi_m_n.gmch_n, |
| 9197 | pipe_config->fdi_m_n.link_m, pipe_config->fdi_m_n.link_n, |
| 9198 | pipe_config->fdi_m_n.tu); |
| 9199 | DRM_DEBUG_KMS("dp: %i, gmch_m: %u, gmch_n: %u, link_m: %u, link_n: %u, tu: %u\n", |
| 9200 | pipe_config->has_dp_encoder, |
| 9201 | pipe_config->dp_m_n.gmch_m, pipe_config->dp_m_n.gmch_n, |
| 9202 | pipe_config->dp_m_n.link_m, pipe_config->dp_m_n.link_n, |
| 9203 | pipe_config->dp_m_n.tu); |
| 9204 | DRM_DEBUG_KMS("requested mode:\n"); |
| 9205 | drm_mode_debug_printmodeline(&pipe_config->requested_mode); |
| 9206 | DRM_DEBUG_KMS("adjusted mode:\n"); |
| 9207 | drm_mode_debug_printmodeline(&pipe_config->adjusted_mode); |
| 9208 | intel_dump_crtc_timings(&pipe_config->adjusted_mode); |
| 9209 | DRM_DEBUG_KMS("port clock: %d\n", pipe_config->port_clock); |
| 9210 | DRM_DEBUG_KMS("pipe src size: %dx%d\n", |
| 9211 | pipe_config->pipe_src_w, pipe_config->pipe_src_h); |
| 9212 | DRM_DEBUG_KMS("gmch pfit: control: 0x%08x, ratios: 0x%08x, lvds border: 0x%08x\n", |
| 9213 | pipe_config->gmch_pfit.control, |
| 9214 | pipe_config->gmch_pfit.pgm_ratios, |
| 9215 | pipe_config->gmch_pfit.lvds_border_bits); |
| 9216 | DRM_DEBUG_KMS("pch pfit: pos: 0x%08x, size: 0x%08x, %s\n", |
| 9217 | pipe_config->pch_pfit.pos, |
| 9218 | pipe_config->pch_pfit.size, |
| 9219 | pipe_config->pch_pfit.enabled ? "enabled" : "disabled"); |
| 9220 | DRM_DEBUG_KMS("ips: %i\n", pipe_config->ips_enabled); |
| 9221 | DRM_DEBUG_KMS("double wide: %i\n", pipe_config->double_wide); |
| 9222 | } |
| 9223 | |
| 9224 | static bool check_encoder_cloning(struct drm_crtc *crtc) |
| 9225 | { |
| 9226 | int num_encoders = 0; |
| 9227 | bool uncloneable_encoders = false; |
| 9228 | struct intel_encoder *encoder; |
| 9229 | |
| 9230 | list_for_each_entry(encoder, &crtc->dev->mode_config.encoder_list, |
| 9231 | base.head) { |
| 9232 | if (&encoder->new_crtc->base != crtc) |
| 9233 | continue; |
| 9234 | |
| 9235 | num_encoders++; |
| 9236 | if (!encoder->cloneable) |
| 9237 | uncloneable_encoders = true; |
| 9238 | } |
| 9239 | |
| 9240 | return !(num_encoders > 1 && uncloneable_encoders); |
| 9241 | } |
| 9242 | |
| 9243 | static struct intel_crtc_config * |
| 9244 | intel_modeset_pipe_config(struct drm_crtc *crtc, |
| 9245 | struct drm_framebuffer *fb, |
| 9246 | struct drm_display_mode *mode) |
| 9247 | { |
| 9248 | struct drm_device *dev = crtc->dev; |
| 9249 | struct intel_encoder *encoder; |
| 9250 | struct intel_crtc_config *pipe_config; |
| 9251 | int plane_bpp, ret = -EINVAL; |
| 9252 | bool retry = true; |
| 9253 | |
| 9254 | if (!check_encoder_cloning(crtc)) { |
| 9255 | DRM_DEBUG_KMS("rejecting invalid cloning configuration\n"); |
| 9256 | return ERR_PTR(-EINVAL); |
| 9257 | } |
| 9258 | |
| 9259 | pipe_config = kzalloc(sizeof(*pipe_config), GFP_KERNEL); |
| 9260 | if (!pipe_config) |
| 9261 | return ERR_PTR(-ENOMEM); |
| 9262 | |
| 9263 | drm_mode_copy(&pipe_config->adjusted_mode, mode); |
| 9264 | drm_mode_copy(&pipe_config->requested_mode, mode); |
| 9265 | |
| 9266 | pipe_config->cpu_transcoder = |
| 9267 | (enum transcoder) to_intel_crtc(crtc)->pipe; |
| 9268 | pipe_config->shared_dpll = DPLL_ID_PRIVATE; |
| 9269 | |
| 9270 | /* |
| 9271 | * Sanitize sync polarity flags based on requested ones. If neither |
| 9272 | * positive or negative polarity is requested, treat this as meaning |
| 9273 | * negative polarity. |
| 9274 | */ |
| 9275 | if (!(pipe_config->adjusted_mode.flags & |
| 9276 | (DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NHSYNC))) |
| 9277 | pipe_config->adjusted_mode.flags |= DRM_MODE_FLAG_NHSYNC; |
| 9278 | |
| 9279 | if (!(pipe_config->adjusted_mode.flags & |
| 9280 | (DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_NVSYNC))) |
| 9281 | pipe_config->adjusted_mode.flags |= DRM_MODE_FLAG_NVSYNC; |
| 9282 | |
| 9283 | /* Compute a starting value for pipe_config->pipe_bpp taking the source |
| 9284 | * plane pixel format and any sink constraints into account. Returns the |
| 9285 | * source plane bpp so that dithering can be selected on mismatches |
| 9286 | * after encoders and crtc also have had their say. */ |
| 9287 | plane_bpp = compute_baseline_pipe_bpp(to_intel_crtc(crtc), |
| 9288 | fb, pipe_config); |
| 9289 | if (plane_bpp < 0) |
| 9290 | goto fail; |
| 9291 | |
| 9292 | /* |
| 9293 | * Determine the real pipe dimensions. Note that stereo modes can |
| 9294 | * increase the actual pipe size due to the frame doubling and |
| 9295 | * insertion of additional space for blanks between the frame. This |
| 9296 | * is stored in the crtc timings. We use the requested mode to do this |
| 9297 | * computation to clearly distinguish it from the adjusted mode, which |
| 9298 | * can be changed by the connectors in the below retry loop. |
| 9299 | */ |
| 9300 | drm_mode_set_crtcinfo(&pipe_config->requested_mode, CRTC_STEREO_DOUBLE); |
| 9301 | pipe_config->pipe_src_w = pipe_config->requested_mode.crtc_hdisplay; |
| 9302 | pipe_config->pipe_src_h = pipe_config->requested_mode.crtc_vdisplay; |
| 9303 | |
| 9304 | encoder_retry: |
| 9305 | /* Ensure the port clock defaults are reset when retrying. */ |
| 9306 | pipe_config->port_clock = 0; |
| 9307 | pipe_config->pixel_multiplier = 1; |
| 9308 | |
| 9309 | /* Fill in default crtc timings, allow encoders to overwrite them. */ |
| 9310 | drm_mode_set_crtcinfo(&pipe_config->adjusted_mode, CRTC_STEREO_DOUBLE); |
| 9311 | |
| 9312 | /* Pass our mode to the connectors and the CRTC to give them a chance to |
| 9313 | * adjust it according to limitations or connector properties, and also |
| 9314 | * a chance to reject the mode entirely. |
| 9315 | */ |
| 9316 | list_for_each_entry(encoder, &dev->mode_config.encoder_list, |
| 9317 | base.head) { |
| 9318 | |
| 9319 | if (&encoder->new_crtc->base != crtc) |
| 9320 | continue; |
| 9321 | |
| 9322 | if (!(encoder->compute_config(encoder, pipe_config))) { |
| 9323 | DRM_DEBUG_KMS("Encoder config failure\n"); |
| 9324 | goto fail; |
| 9325 | } |
| 9326 | } |
| 9327 | |
| 9328 | /* Set default port clock if not overwritten by the encoder. Needs to be |
| 9329 | * done afterwards in case the encoder adjusts the mode. */ |
| 9330 | if (!pipe_config->port_clock) |
| 9331 | pipe_config->port_clock = pipe_config->adjusted_mode.crtc_clock |
| 9332 | * pipe_config->pixel_multiplier; |
| 9333 | |
| 9334 | ret = intel_crtc_compute_config(to_intel_crtc(crtc), pipe_config); |
| 9335 | if (ret < 0) { |
| 9336 | DRM_DEBUG_KMS("CRTC fixup failed\n"); |
| 9337 | goto fail; |
| 9338 | } |
| 9339 | |
| 9340 | if (ret == RETRY) { |
| 9341 | if (WARN(!retry, "loop in pipe configuration computation\n")) { |
| 9342 | ret = -EINVAL; |
| 9343 | goto fail; |
| 9344 | } |
| 9345 | |
| 9346 | DRM_DEBUG_KMS("CRTC bw constrained, retrying\n"); |
| 9347 | retry = false; |
| 9348 | goto encoder_retry; |
| 9349 | } |
| 9350 | |
| 9351 | pipe_config->dither = pipe_config->pipe_bpp != plane_bpp; |
| 9352 | DRM_DEBUG_KMS("plane bpp: %i, pipe bpp: %i, dithering: %i\n", |
| 9353 | plane_bpp, pipe_config->pipe_bpp, pipe_config->dither); |
| 9354 | |
| 9355 | return pipe_config; |
| 9356 | fail: |
| 9357 | kfree(pipe_config); |
| 9358 | return ERR_PTR(ret); |
| 9359 | } |
| 9360 | |
| 9361 | /* Computes which crtcs are affected and sets the relevant bits in the mask. For |
| 9362 | * simplicity we use the crtc's pipe number (because it's easier to obtain). */ |
| 9363 | static void |
| 9364 | intel_modeset_affected_pipes(struct drm_crtc *crtc, unsigned *modeset_pipes, |
| 9365 | unsigned *prepare_pipes, unsigned *disable_pipes) |
| 9366 | { |
| 9367 | struct intel_crtc *intel_crtc; |
| 9368 | struct drm_device *dev = crtc->dev; |
| 9369 | struct intel_encoder *encoder; |
| 9370 | struct intel_connector *connector; |
| 9371 | struct drm_crtc *tmp_crtc; |
| 9372 | |
| 9373 | *disable_pipes = *modeset_pipes = *prepare_pipes = 0; |
| 9374 | |
| 9375 | /* Check which crtcs have changed outputs connected to them, these need |
| 9376 | * to be part of the prepare_pipes mask. We don't (yet) support global |
| 9377 | * modeset across multiple crtcs, so modeset_pipes will only have one |
| 9378 | * bit set at most. */ |
| 9379 | list_for_each_entry(connector, &dev->mode_config.connector_list, |
| 9380 | base.head) { |
| 9381 | if (connector->base.encoder == &connector->new_encoder->base) |
| 9382 | continue; |
| 9383 | |
| 9384 | if (connector->base.encoder) { |
| 9385 | tmp_crtc = connector->base.encoder->crtc; |
| 9386 | |
| 9387 | *prepare_pipes |= 1 << to_intel_crtc(tmp_crtc)->pipe; |
| 9388 | } |
| 9389 | |
| 9390 | if (connector->new_encoder) |
| 9391 | *prepare_pipes |= |
| 9392 | 1 << connector->new_encoder->new_crtc->pipe; |
| 9393 | } |
| 9394 | |
| 9395 | list_for_each_entry(encoder, &dev->mode_config.encoder_list, |
| 9396 | base.head) { |
| 9397 | if (encoder->base.crtc == &encoder->new_crtc->base) |
| 9398 | continue; |
| 9399 | |
| 9400 | if (encoder->base.crtc) { |
| 9401 | tmp_crtc = encoder->base.crtc; |
| 9402 | |
| 9403 | *prepare_pipes |= 1 << to_intel_crtc(tmp_crtc)->pipe; |
| 9404 | } |
| 9405 | |
| 9406 | if (encoder->new_crtc) |
| 9407 | *prepare_pipes |= 1 << encoder->new_crtc->pipe; |
| 9408 | } |
| 9409 | |
| 9410 | /* Check for pipes that will be enabled/disabled ... */ |
| 9411 | list_for_each_entry(intel_crtc, &dev->mode_config.crtc_list, |
| 9412 | base.head) { |
| 9413 | if (intel_crtc->base.enabled == intel_crtc->new_enabled) |
| 9414 | continue; |
| 9415 | |
| 9416 | if (!intel_crtc->new_enabled) |
| 9417 | *disable_pipes |= 1 << intel_crtc->pipe; |
| 9418 | else |
| 9419 | *prepare_pipes |= 1 << intel_crtc->pipe; |
| 9420 | } |
| 9421 | |
| 9422 | |
| 9423 | /* set_mode is also used to update properties on life display pipes. */ |
| 9424 | intel_crtc = to_intel_crtc(crtc); |
| 9425 | if (intel_crtc->new_enabled) |
| 9426 | *prepare_pipes |= 1 << intel_crtc->pipe; |
| 9427 | |
| 9428 | /* |
| 9429 | * For simplicity do a full modeset on any pipe where the output routing |
| 9430 | * changed. We could be more clever, but that would require us to be |
| 9431 | * more careful with calling the relevant encoder->mode_set functions. |
| 9432 | */ |
| 9433 | if (*prepare_pipes) |
| 9434 | *modeset_pipes = *prepare_pipes; |
| 9435 | |
| 9436 | /* ... and mask these out. */ |
| 9437 | *modeset_pipes &= ~(*disable_pipes); |
| 9438 | *prepare_pipes &= ~(*disable_pipes); |
| 9439 | |
| 9440 | /* |
| 9441 | * HACK: We don't (yet) fully support global modesets. intel_set_config |
| 9442 | * obies this rule, but the modeset restore mode of |
| 9443 | * intel_modeset_setup_hw_state does not. |
| 9444 | */ |
| 9445 | *modeset_pipes &= 1 << intel_crtc->pipe; |
| 9446 | *prepare_pipes &= 1 << intel_crtc->pipe; |
| 9447 | |
| 9448 | DRM_DEBUG_KMS("set mode pipe masks: modeset: %x, prepare: %x, disable: %x\n", |
| 9449 | *modeset_pipes, *prepare_pipes, *disable_pipes); |
| 9450 | } |
| 9451 | |
| 9452 | static bool intel_crtc_in_use(struct drm_crtc *crtc) |
| 9453 | { |
| 9454 | struct drm_encoder *encoder; |
| 9455 | struct drm_device *dev = crtc->dev; |
| 9456 | |
| 9457 | list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) |
| 9458 | if (encoder->crtc == crtc) |
| 9459 | return true; |
| 9460 | |
| 9461 | return false; |
| 9462 | } |
| 9463 | |
| 9464 | static void |
| 9465 | intel_modeset_update_state(struct drm_device *dev, unsigned prepare_pipes) |
| 9466 | { |
| 9467 | struct intel_encoder *intel_encoder; |
| 9468 | struct intel_crtc *intel_crtc; |
| 9469 | struct drm_connector *connector; |
| 9470 | |
| 9471 | list_for_each_entry(intel_encoder, &dev->mode_config.encoder_list, |
| 9472 | base.head) { |
| 9473 | if (!intel_encoder->base.crtc) |
| 9474 | continue; |
| 9475 | |
| 9476 | intel_crtc = to_intel_crtc(intel_encoder->base.crtc); |
| 9477 | |
| 9478 | if (prepare_pipes & (1 << intel_crtc->pipe)) |
| 9479 | intel_encoder->connectors_active = false; |
| 9480 | } |
| 9481 | |
| 9482 | intel_modeset_commit_output_state(dev); |
| 9483 | |
| 9484 | /* Double check state. */ |
| 9485 | list_for_each_entry(intel_crtc, &dev->mode_config.crtc_list, |
| 9486 | base.head) { |
| 9487 | WARN_ON(intel_crtc->base.enabled != intel_crtc_in_use(&intel_crtc->base)); |
| 9488 | WARN_ON(intel_crtc->new_config && |
| 9489 | intel_crtc->new_config != &intel_crtc->config); |
| 9490 | WARN_ON(intel_crtc->base.enabled != !!intel_crtc->new_config); |
| 9491 | } |
| 9492 | |
| 9493 | list_for_each_entry(connector, &dev->mode_config.connector_list, head) { |
| 9494 | if (!connector->encoder || !connector->encoder->crtc) |
| 9495 | continue; |
| 9496 | |
| 9497 | intel_crtc = to_intel_crtc(connector->encoder->crtc); |
| 9498 | |
| 9499 | if (prepare_pipes & (1 << intel_crtc->pipe)) { |
| 9500 | struct drm_property *dpms_property = |
| 9501 | dev->mode_config.dpms_property; |
| 9502 | |
| 9503 | connector->dpms = DRM_MODE_DPMS_ON; |
| 9504 | drm_object_property_set_value(&connector->base, |
| 9505 | dpms_property, |
| 9506 | DRM_MODE_DPMS_ON); |
| 9507 | |
| 9508 | intel_encoder = to_intel_encoder(connector->encoder); |
| 9509 | intel_encoder->connectors_active = true; |
| 9510 | } |
| 9511 | } |
| 9512 | |
| 9513 | } |
| 9514 | |
| 9515 | static bool intel_fuzzy_clock_check(int clock1, int clock2) |
| 9516 | { |
| 9517 | int diff; |
| 9518 | |
| 9519 | if (clock1 == clock2) |
| 9520 | return true; |
| 9521 | |
| 9522 | if (!clock1 || !clock2) |
| 9523 | return false; |
| 9524 | |
| 9525 | diff = abs(clock1 - clock2); |
| 9526 | |
| 9527 | if (((((diff + clock1 + clock2) * 100)) / (clock1 + clock2)) < 105) |
| 9528 | return true; |
| 9529 | |
| 9530 | return false; |
| 9531 | } |
| 9532 | |
| 9533 | #define for_each_intel_crtc_masked(dev, mask, intel_crtc) \ |
| 9534 | list_for_each_entry((intel_crtc), \ |
| 9535 | &(dev)->mode_config.crtc_list, \ |
| 9536 | base.head) \ |
| 9537 | if (mask & (1 <<(intel_crtc)->pipe)) |
| 9538 | |
| 9539 | static bool |
| 9540 | intel_pipe_config_compare(struct drm_device *dev, |
| 9541 | struct intel_crtc_config *current_config, |
| 9542 | struct intel_crtc_config *pipe_config) |
| 9543 | { |
| 9544 | #define PIPE_CONF_CHECK_X(name) \ |
| 9545 | if (current_config->name != pipe_config->name) { \ |
| 9546 | DRM_ERROR("mismatch in " #name " " \ |
| 9547 | "(expected 0x%08x, found 0x%08x)\n", \ |
| 9548 | current_config->name, \ |
| 9549 | pipe_config->name); \ |
| 9550 | return false; \ |
| 9551 | } |
| 9552 | |
| 9553 | #define PIPE_CONF_CHECK_I(name) \ |
| 9554 | if (current_config->name != pipe_config->name) { \ |
| 9555 | DRM_ERROR("mismatch in " #name " " \ |
| 9556 | "(expected %i, found %i)\n", \ |
| 9557 | current_config->name, \ |
| 9558 | pipe_config->name); \ |
| 9559 | return false; \ |
| 9560 | } |
| 9561 | |
| 9562 | #define PIPE_CONF_CHECK_FLAGS(name, mask) \ |
| 9563 | if ((current_config->name ^ pipe_config->name) & (mask)) { \ |
| 9564 | DRM_ERROR("mismatch in " #name "(" #mask ") " \ |
| 9565 | "(expected %i, found %i)\n", \ |
| 9566 | current_config->name & (mask), \ |
| 9567 | pipe_config->name & (mask)); \ |
| 9568 | return false; \ |
| 9569 | } |
| 9570 | |
| 9571 | #define PIPE_CONF_CHECK_CLOCK_FUZZY(name) \ |
| 9572 | if (!intel_fuzzy_clock_check(current_config->name, pipe_config->name)) { \ |
| 9573 | DRM_ERROR("mismatch in " #name " " \ |
| 9574 | "(expected %i, found %i)\n", \ |
| 9575 | current_config->name, \ |
| 9576 | pipe_config->name); \ |
| 9577 | return false; \ |
| 9578 | } |
| 9579 | |
| 9580 | #define PIPE_CONF_QUIRK(quirk) \ |
| 9581 | ((current_config->quirks | pipe_config->quirks) & (quirk)) |
| 9582 | |
| 9583 | PIPE_CONF_CHECK_I(cpu_transcoder); |
| 9584 | |
| 9585 | PIPE_CONF_CHECK_I(has_pch_encoder); |
| 9586 | PIPE_CONF_CHECK_I(fdi_lanes); |
| 9587 | PIPE_CONF_CHECK_I(fdi_m_n.gmch_m); |
| 9588 | PIPE_CONF_CHECK_I(fdi_m_n.gmch_n); |
| 9589 | PIPE_CONF_CHECK_I(fdi_m_n.link_m); |
| 9590 | PIPE_CONF_CHECK_I(fdi_m_n.link_n); |
| 9591 | PIPE_CONF_CHECK_I(fdi_m_n.tu); |
| 9592 | |
| 9593 | PIPE_CONF_CHECK_I(has_dp_encoder); |
| 9594 | PIPE_CONF_CHECK_I(dp_m_n.gmch_m); |
| 9595 | PIPE_CONF_CHECK_I(dp_m_n.gmch_n); |
| 9596 | PIPE_CONF_CHECK_I(dp_m_n.link_m); |
| 9597 | PIPE_CONF_CHECK_I(dp_m_n.link_n); |
| 9598 | PIPE_CONF_CHECK_I(dp_m_n.tu); |
| 9599 | |
| 9600 | PIPE_CONF_CHECK_I(adjusted_mode.crtc_hdisplay); |
| 9601 | PIPE_CONF_CHECK_I(adjusted_mode.crtc_htotal); |
| 9602 | PIPE_CONF_CHECK_I(adjusted_mode.crtc_hblank_start); |
| 9603 | PIPE_CONF_CHECK_I(adjusted_mode.crtc_hblank_end); |
| 9604 | PIPE_CONF_CHECK_I(adjusted_mode.crtc_hsync_start); |
| 9605 | PIPE_CONF_CHECK_I(adjusted_mode.crtc_hsync_end); |
| 9606 | |
| 9607 | PIPE_CONF_CHECK_I(adjusted_mode.crtc_vdisplay); |
| 9608 | PIPE_CONF_CHECK_I(adjusted_mode.crtc_vtotal); |
| 9609 | PIPE_CONF_CHECK_I(adjusted_mode.crtc_vblank_start); |
| 9610 | PIPE_CONF_CHECK_I(adjusted_mode.crtc_vblank_end); |
| 9611 | PIPE_CONF_CHECK_I(adjusted_mode.crtc_vsync_start); |
| 9612 | PIPE_CONF_CHECK_I(adjusted_mode.crtc_vsync_end); |
| 9613 | |
| 9614 | PIPE_CONF_CHECK_I(pixel_multiplier); |
| 9615 | |
| 9616 | PIPE_CONF_CHECK_FLAGS(adjusted_mode.flags, |
| 9617 | DRM_MODE_FLAG_INTERLACE); |
| 9618 | |
| 9619 | if (!PIPE_CONF_QUIRK(PIPE_CONFIG_QUIRK_MODE_SYNC_FLAGS)) { |
| 9620 | PIPE_CONF_CHECK_FLAGS(adjusted_mode.flags, |
| 9621 | DRM_MODE_FLAG_PHSYNC); |
| 9622 | PIPE_CONF_CHECK_FLAGS(adjusted_mode.flags, |
| 9623 | DRM_MODE_FLAG_NHSYNC); |
| 9624 | PIPE_CONF_CHECK_FLAGS(adjusted_mode.flags, |
| 9625 | DRM_MODE_FLAG_PVSYNC); |
| 9626 | PIPE_CONF_CHECK_FLAGS(adjusted_mode.flags, |
| 9627 | DRM_MODE_FLAG_NVSYNC); |
| 9628 | } |
| 9629 | |
| 9630 | PIPE_CONF_CHECK_I(pipe_src_w); |
| 9631 | PIPE_CONF_CHECK_I(pipe_src_h); |
| 9632 | |
| 9633 | PIPE_CONF_CHECK_I(gmch_pfit.control); |
| 9634 | /* pfit ratios are autocomputed by the hw on gen4+ */ |
| 9635 | if (INTEL_INFO(dev)->gen < 4) |
| 9636 | PIPE_CONF_CHECK_I(gmch_pfit.pgm_ratios); |
| 9637 | PIPE_CONF_CHECK_I(gmch_pfit.lvds_border_bits); |
| 9638 | PIPE_CONF_CHECK_I(pch_pfit.enabled); |
| 9639 | if (current_config->pch_pfit.enabled) { |
| 9640 | PIPE_CONF_CHECK_I(pch_pfit.pos); |
| 9641 | PIPE_CONF_CHECK_I(pch_pfit.size); |
| 9642 | } |
| 9643 | |
| 9644 | /* BDW+ don't expose a synchronous way to read the state */ |
| 9645 | if (IS_HASWELL(dev)) |
| 9646 | PIPE_CONF_CHECK_I(ips_enabled); |
| 9647 | |
| 9648 | PIPE_CONF_CHECK_I(double_wide); |
| 9649 | |
| 9650 | PIPE_CONF_CHECK_I(shared_dpll); |
| 9651 | PIPE_CONF_CHECK_X(dpll_hw_state.dpll); |
| 9652 | PIPE_CONF_CHECK_X(dpll_hw_state.dpll_md); |
| 9653 | PIPE_CONF_CHECK_X(dpll_hw_state.fp0); |
| 9654 | PIPE_CONF_CHECK_X(dpll_hw_state.fp1); |
| 9655 | |
| 9656 | if (IS_G4X(dev) || INTEL_INFO(dev)->gen >= 5) |
| 9657 | PIPE_CONF_CHECK_I(pipe_bpp); |
| 9658 | |
| 9659 | PIPE_CONF_CHECK_CLOCK_FUZZY(adjusted_mode.crtc_clock); |
| 9660 | PIPE_CONF_CHECK_CLOCK_FUZZY(port_clock); |
| 9661 | |
| 9662 | #undef PIPE_CONF_CHECK_X |
| 9663 | #undef PIPE_CONF_CHECK_I |
| 9664 | #undef PIPE_CONF_CHECK_FLAGS |
| 9665 | #undef PIPE_CONF_CHECK_CLOCK_FUZZY |
| 9666 | #undef PIPE_CONF_QUIRK |
| 9667 | |
| 9668 | return true; |
| 9669 | } |
| 9670 | |
| 9671 | static void |
| 9672 | check_connector_state(struct drm_device *dev) |
| 9673 | { |
| 9674 | struct intel_connector *connector; |
| 9675 | |
| 9676 | list_for_each_entry(connector, &dev->mode_config.connector_list, |
| 9677 | base.head) { |
| 9678 | /* This also checks the encoder/connector hw state with the |
| 9679 | * ->get_hw_state callbacks. */ |
| 9680 | intel_connector_check_state(connector); |
| 9681 | |
| 9682 | WARN(&connector->new_encoder->base != connector->base.encoder, |
| 9683 | "connector's staged encoder doesn't match current encoder\n"); |
| 9684 | } |
| 9685 | } |
| 9686 | |
| 9687 | static void |
| 9688 | check_encoder_state(struct drm_device *dev) |
| 9689 | { |
| 9690 | struct intel_encoder *encoder; |
| 9691 | struct intel_connector *connector; |
| 9692 | |
| 9693 | list_for_each_entry(encoder, &dev->mode_config.encoder_list, |
| 9694 | base.head) { |
| 9695 | bool enabled = false; |
| 9696 | bool active = false; |
| 9697 | enum pipe pipe, tracked_pipe; |
| 9698 | |
| 9699 | DRM_DEBUG_KMS("[ENCODER:%d:%s]\n", |
| 9700 | encoder->base.base.id, |
| 9701 | drm_get_encoder_name(&encoder->base)); |
| 9702 | |
| 9703 | WARN(&encoder->new_crtc->base != encoder->base.crtc, |
| 9704 | "encoder's stage crtc doesn't match current crtc\n"); |
| 9705 | WARN(encoder->connectors_active && !encoder->base.crtc, |
| 9706 | "encoder's active_connectors set, but no crtc\n"); |
| 9707 | |
| 9708 | list_for_each_entry(connector, &dev->mode_config.connector_list, |
| 9709 | base.head) { |
| 9710 | if (connector->base.encoder != &encoder->base) |
| 9711 | continue; |
| 9712 | enabled = true; |
| 9713 | if (connector->base.dpms != DRM_MODE_DPMS_OFF) |
| 9714 | active = true; |
| 9715 | } |
| 9716 | WARN(!!encoder->base.crtc != enabled, |
| 9717 | "encoder's enabled state mismatch " |
| 9718 | "(expected %i, found %i)\n", |
| 9719 | !!encoder->base.crtc, enabled); |
| 9720 | WARN(active && !encoder->base.crtc, |
| 9721 | "active encoder with no crtc\n"); |
| 9722 | |
| 9723 | WARN(encoder->connectors_active != active, |
| 9724 | "encoder's computed active state doesn't match tracked active state " |
| 9725 | "(expected %i, found %i)\n", active, encoder->connectors_active); |
| 9726 | |
| 9727 | active = encoder->get_hw_state(encoder, &pipe); |
| 9728 | WARN(active != encoder->connectors_active, |
| 9729 | "encoder's hw state doesn't match sw tracking " |
| 9730 | "(expected %i, found %i)\n", |
| 9731 | encoder->connectors_active, active); |
| 9732 | |
| 9733 | if (!encoder->base.crtc) |
| 9734 | continue; |
| 9735 | |
| 9736 | tracked_pipe = to_intel_crtc(encoder->base.crtc)->pipe; |
| 9737 | WARN(active && pipe != tracked_pipe, |
| 9738 | "active encoder's pipe doesn't match" |
| 9739 | "(expected %i, found %i)\n", |
| 9740 | tracked_pipe, pipe); |
| 9741 | |
| 9742 | } |
| 9743 | } |
| 9744 | |
| 9745 | static void |
| 9746 | check_crtc_state(struct drm_device *dev) |
| 9747 | { |
| 9748 | drm_i915_private_t *dev_priv = dev->dev_private; |
| 9749 | struct intel_crtc *crtc; |
| 9750 | struct intel_encoder *encoder; |
| 9751 | struct intel_crtc_config pipe_config; |
| 9752 | |
| 9753 | list_for_each_entry(crtc, &dev->mode_config.crtc_list, |
| 9754 | base.head) { |
| 9755 | bool enabled = false; |
| 9756 | bool active = false; |
| 9757 | |
| 9758 | memset(&pipe_config, 0, sizeof(pipe_config)); |
| 9759 | |
| 9760 | DRM_DEBUG_KMS("[CRTC:%d]\n", |
| 9761 | crtc->base.base.id); |
| 9762 | |
| 9763 | WARN(crtc->active && !crtc->base.enabled, |
| 9764 | "active crtc, but not enabled in sw tracking\n"); |
| 9765 | |
| 9766 | list_for_each_entry(encoder, &dev->mode_config.encoder_list, |
| 9767 | base.head) { |
| 9768 | if (encoder->base.crtc != &crtc->base) |
| 9769 | continue; |
| 9770 | enabled = true; |
| 9771 | if (encoder->connectors_active) |
| 9772 | active = true; |
| 9773 | } |
| 9774 | |
| 9775 | WARN(active != crtc->active, |
| 9776 | "crtc's computed active state doesn't match tracked active state " |
| 9777 | "(expected %i, found %i)\n", active, crtc->active); |
| 9778 | WARN(enabled != crtc->base.enabled, |
| 9779 | "crtc's computed enabled state doesn't match tracked enabled state " |
| 9780 | "(expected %i, found %i)\n", enabled, crtc->base.enabled); |
| 9781 | |
| 9782 | active = dev_priv->display.get_pipe_config(crtc, |
| 9783 | &pipe_config); |
| 9784 | |
| 9785 | /* hw state is inconsistent with the pipe A quirk */ |
| 9786 | if (crtc->pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) |
| 9787 | active = crtc->active; |
| 9788 | |
| 9789 | list_for_each_entry(encoder, &dev->mode_config.encoder_list, |
| 9790 | base.head) { |
| 9791 | enum pipe pipe; |
| 9792 | if (encoder->base.crtc != &crtc->base) |
| 9793 | continue; |
| 9794 | if (encoder->get_hw_state(encoder, &pipe)) |
| 9795 | encoder->get_config(encoder, &pipe_config); |
| 9796 | } |
| 9797 | |
| 9798 | WARN(crtc->active != active, |
| 9799 | "crtc active state doesn't match with hw state " |
| 9800 | "(expected %i, found %i)\n", crtc->active, active); |
| 9801 | |
| 9802 | if (active && |
| 9803 | !intel_pipe_config_compare(dev, &crtc->config, &pipe_config)) { |
| 9804 | WARN(1, "pipe state doesn't match!\n"); |
| 9805 | intel_dump_pipe_config(crtc, &pipe_config, |
| 9806 | "[hw state]"); |
| 9807 | intel_dump_pipe_config(crtc, &crtc->config, |
| 9808 | "[sw state]"); |
| 9809 | } |
| 9810 | } |
| 9811 | } |
| 9812 | |
| 9813 | static void |
| 9814 | check_shared_dpll_state(struct drm_device *dev) |
| 9815 | { |
| 9816 | drm_i915_private_t *dev_priv = dev->dev_private; |
| 9817 | struct intel_crtc *crtc; |
| 9818 | struct intel_dpll_hw_state dpll_hw_state; |
| 9819 | int i; |
| 9820 | |
| 9821 | for (i = 0; i < dev_priv->num_shared_dpll; i++) { |
| 9822 | struct intel_shared_dpll *pll = &dev_priv->shared_dplls[i]; |
| 9823 | int enabled_crtcs = 0, active_crtcs = 0; |
| 9824 | bool active; |
| 9825 | |
| 9826 | memset(&dpll_hw_state, 0, sizeof(dpll_hw_state)); |
| 9827 | |
| 9828 | DRM_DEBUG_KMS("%s\n", pll->name); |
| 9829 | |
| 9830 | active = pll->get_hw_state(dev_priv, pll, &dpll_hw_state); |
| 9831 | |
| 9832 | WARN(pll->active > pll->refcount, |
| 9833 | "more active pll users than references: %i vs %i\n", |
| 9834 | pll->active, pll->refcount); |
| 9835 | WARN(pll->active && !pll->on, |
| 9836 | "pll in active use but not on in sw tracking\n"); |
| 9837 | WARN(pll->on && !pll->active, |
| 9838 | "pll in on but not on in use in sw tracking\n"); |
| 9839 | WARN(pll->on != active, |
| 9840 | "pll on state mismatch (expected %i, found %i)\n", |
| 9841 | pll->on, active); |
| 9842 | |
| 9843 | list_for_each_entry(crtc, &dev->mode_config.crtc_list, |
| 9844 | base.head) { |
| 9845 | if (crtc->base.enabled && intel_crtc_to_shared_dpll(crtc) == pll) |
| 9846 | enabled_crtcs++; |
| 9847 | if (crtc->active && intel_crtc_to_shared_dpll(crtc) == pll) |
| 9848 | active_crtcs++; |
| 9849 | } |
| 9850 | WARN(pll->active != active_crtcs, |
| 9851 | "pll active crtcs mismatch (expected %i, found %i)\n", |
| 9852 | pll->active, active_crtcs); |
| 9853 | WARN(pll->refcount != enabled_crtcs, |
| 9854 | "pll enabled crtcs mismatch (expected %i, found %i)\n", |
| 9855 | pll->refcount, enabled_crtcs); |
| 9856 | |
| 9857 | WARN(pll->on && memcmp(&pll->hw_state, &dpll_hw_state, |
| 9858 | sizeof(dpll_hw_state)), |
| 9859 | "pll hw state mismatch\n"); |
| 9860 | } |
| 9861 | } |
| 9862 | |
| 9863 | void |
| 9864 | intel_modeset_check_state(struct drm_device *dev) |
| 9865 | { |
| 9866 | check_connector_state(dev); |
| 9867 | check_encoder_state(dev); |
| 9868 | check_crtc_state(dev); |
| 9869 | check_shared_dpll_state(dev); |
| 9870 | } |
| 9871 | |
| 9872 | void ironlake_check_encoder_dotclock(const struct intel_crtc_config *pipe_config, |
| 9873 | int dotclock) |
| 9874 | { |
| 9875 | /* |
| 9876 | * FDI already provided one idea for the dotclock. |
| 9877 | * Yell if the encoder disagrees. |
| 9878 | */ |
| 9879 | WARN(!intel_fuzzy_clock_check(pipe_config->adjusted_mode.crtc_clock, dotclock), |
| 9880 | "FDI dotclock and encoder dotclock mismatch, fdi: %i, encoder: %i\n", |
| 9881 | pipe_config->adjusted_mode.crtc_clock, dotclock); |
| 9882 | } |
| 9883 | |
| 9884 | static int __intel_set_mode(struct drm_crtc *crtc, |
| 9885 | struct drm_display_mode *mode, |
| 9886 | int x, int y, struct drm_framebuffer *fb) |
| 9887 | { |
| 9888 | struct drm_device *dev = crtc->dev; |
| 9889 | drm_i915_private_t *dev_priv = dev->dev_private; |
| 9890 | struct drm_display_mode *saved_mode; |
| 9891 | struct intel_crtc_config *pipe_config = NULL; |
| 9892 | struct intel_crtc *intel_crtc; |
| 9893 | unsigned disable_pipes, prepare_pipes, modeset_pipes; |
| 9894 | int ret = 0; |
| 9895 | |
| 9896 | saved_mode = kmalloc(sizeof(*saved_mode), GFP_KERNEL); |
| 9897 | if (!saved_mode) |
| 9898 | return -ENOMEM; |
| 9899 | |
| 9900 | intel_modeset_affected_pipes(crtc, &modeset_pipes, |
| 9901 | &prepare_pipes, &disable_pipes); |
| 9902 | |
| 9903 | *saved_mode = crtc->mode; |
| 9904 | |
| 9905 | /* Hack: Because we don't (yet) support global modeset on multiple |
| 9906 | * crtcs, we don't keep track of the new mode for more than one crtc. |
| 9907 | * Hence simply check whether any bit is set in modeset_pipes in all the |
| 9908 | * pieces of code that are not yet converted to deal with mutliple crtcs |
| 9909 | * changing their mode at the same time. */ |
| 9910 | if (modeset_pipes) { |
| 9911 | pipe_config = intel_modeset_pipe_config(crtc, fb, mode); |
| 9912 | if (IS_ERR(pipe_config)) { |
| 9913 | ret = PTR_ERR(pipe_config); |
| 9914 | pipe_config = NULL; |
| 9915 | |
| 9916 | goto out; |
| 9917 | } |
| 9918 | intel_dump_pipe_config(to_intel_crtc(crtc), pipe_config, |
| 9919 | "[modeset]"); |
| 9920 | to_intel_crtc(crtc)->new_config = pipe_config; |
| 9921 | } |
| 9922 | |
| 9923 | /* |
| 9924 | * See if the config requires any additional preparation, e.g. |
| 9925 | * to adjust global state with pipes off. We need to do this |
| 9926 | * here so we can get the modeset_pipe updated config for the new |
| 9927 | * mode set on this crtc. For other crtcs we need to use the |
| 9928 | * adjusted_mode bits in the crtc directly. |
| 9929 | */ |
| 9930 | if (IS_VALLEYVIEW(dev)) { |
| 9931 | valleyview_modeset_global_pipes(dev, &prepare_pipes); |
| 9932 | |
| 9933 | /* may have added more to prepare_pipes than we should */ |
| 9934 | prepare_pipes &= ~disable_pipes; |
| 9935 | } |
| 9936 | |
| 9937 | for_each_intel_crtc_masked(dev, disable_pipes, intel_crtc) |
| 9938 | intel_crtc_disable(&intel_crtc->base); |
| 9939 | |
| 9940 | for_each_intel_crtc_masked(dev, prepare_pipes, intel_crtc) { |
| 9941 | if (intel_crtc->base.enabled) |
| 9942 | dev_priv->display.crtc_disable(&intel_crtc->base); |
| 9943 | } |
| 9944 | |
| 9945 | /* crtc->mode is already used by the ->mode_set callbacks, hence we need |
| 9946 | * to set it here already despite that we pass it down the callchain. |
| 9947 | */ |
| 9948 | if (modeset_pipes) { |
| 9949 | crtc->mode = *mode; |
| 9950 | /* mode_set/enable/disable functions rely on a correct pipe |
| 9951 | * config. */ |
| 9952 | to_intel_crtc(crtc)->config = *pipe_config; |
| 9953 | to_intel_crtc(crtc)->new_config = &to_intel_crtc(crtc)->config; |
| 9954 | |
| 9955 | /* |
| 9956 | * Calculate and store various constants which |
| 9957 | * are later needed by vblank and swap-completion |
| 9958 | * timestamping. They are derived from true hwmode. |
| 9959 | */ |
| 9960 | drm_calc_timestamping_constants(crtc, |
| 9961 | &pipe_config->adjusted_mode); |
| 9962 | } |
| 9963 | |
| 9964 | /* Only after disabling all output pipelines that will be changed can we |
| 9965 | * update the the output configuration. */ |
| 9966 | intel_modeset_update_state(dev, prepare_pipes); |
| 9967 | |
| 9968 | if (dev_priv->display.modeset_global_resources) |
| 9969 | dev_priv->display.modeset_global_resources(dev); |
| 9970 | |
| 9971 | /* Set up the DPLL and any encoders state that needs to adjust or depend |
| 9972 | * on the DPLL. |
| 9973 | */ |
| 9974 | for_each_intel_crtc_masked(dev, modeset_pipes, intel_crtc) { |
| 9975 | ret = intel_crtc_mode_set(&intel_crtc->base, |
| 9976 | x, y, fb); |
| 9977 | if (ret) |
| 9978 | goto done; |
| 9979 | } |
| 9980 | |
| 9981 | /* Now enable the clocks, plane, pipe, and connectors that we set up. */ |
| 9982 | for_each_intel_crtc_masked(dev, prepare_pipes, intel_crtc) |
| 9983 | dev_priv->display.crtc_enable(&intel_crtc->base); |
| 9984 | |
| 9985 | /* FIXME: add subpixel order */ |
| 9986 | done: |
| 9987 | if (ret && crtc->enabled) |
| 9988 | crtc->mode = *saved_mode; |
| 9989 | |
| 9990 | out: |
| 9991 | kfree(pipe_config); |
| 9992 | kfree(saved_mode); |
| 9993 | return ret; |
| 9994 | } |
| 9995 | |
| 9996 | static int intel_set_mode(struct drm_crtc *crtc, |
| 9997 | struct drm_display_mode *mode, |
| 9998 | int x, int y, struct drm_framebuffer *fb) |
| 9999 | { |
| 10000 | int ret; |
| 10001 | |
| 10002 | ret = __intel_set_mode(crtc, mode, x, y, fb); |
| 10003 | |
| 10004 | if (ret == 0) |
| 10005 | intel_modeset_check_state(crtc->dev); |
| 10006 | |
| 10007 | return ret; |
| 10008 | } |
| 10009 | |
| 10010 | void intel_crtc_restore_mode(struct drm_crtc *crtc) |
| 10011 | { |
| 10012 | intel_set_mode(crtc, &crtc->mode, crtc->x, crtc->y, crtc->fb); |
| 10013 | } |
| 10014 | |
| 10015 | #undef for_each_intel_crtc_masked |
| 10016 | |
| 10017 | static void intel_set_config_free(struct intel_set_config *config) |
| 10018 | { |
| 10019 | if (!config) |
| 10020 | return; |
| 10021 | |
| 10022 | kfree(config->save_connector_encoders); |
| 10023 | kfree(config->save_encoder_crtcs); |
| 10024 | kfree(config->save_crtc_enabled); |
| 10025 | kfree(config); |
| 10026 | } |
| 10027 | |
| 10028 | static int intel_set_config_save_state(struct drm_device *dev, |
| 10029 | struct intel_set_config *config) |
| 10030 | { |
| 10031 | struct drm_crtc *crtc; |
| 10032 | struct drm_encoder *encoder; |
| 10033 | struct drm_connector *connector; |
| 10034 | int count; |
| 10035 | |
| 10036 | config->save_crtc_enabled = |
| 10037 | kcalloc(dev->mode_config.num_crtc, |
| 10038 | sizeof(bool), GFP_KERNEL); |
| 10039 | if (!config->save_crtc_enabled) |
| 10040 | return -ENOMEM; |
| 10041 | |
| 10042 | config->save_encoder_crtcs = |
| 10043 | kcalloc(dev->mode_config.num_encoder, |
| 10044 | sizeof(struct drm_crtc *), GFP_KERNEL); |
| 10045 | if (!config->save_encoder_crtcs) |
| 10046 | return -ENOMEM; |
| 10047 | |
| 10048 | config->save_connector_encoders = |
| 10049 | kcalloc(dev->mode_config.num_connector, |
| 10050 | sizeof(struct drm_encoder *), GFP_KERNEL); |
| 10051 | if (!config->save_connector_encoders) |
| 10052 | return -ENOMEM; |
| 10053 | |
| 10054 | /* Copy data. Note that driver private data is not affected. |
| 10055 | * Should anything bad happen only the expected state is |
| 10056 | * restored, not the drivers personal bookkeeping. |
| 10057 | */ |
| 10058 | count = 0; |
| 10059 | list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { |
| 10060 | config->save_crtc_enabled[count++] = crtc->enabled; |
| 10061 | } |
| 10062 | |
| 10063 | count = 0; |
| 10064 | list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { |
| 10065 | config->save_encoder_crtcs[count++] = encoder->crtc; |
| 10066 | } |
| 10067 | |
| 10068 | count = 0; |
| 10069 | list_for_each_entry(connector, &dev->mode_config.connector_list, head) { |
| 10070 | config->save_connector_encoders[count++] = connector->encoder; |
| 10071 | } |
| 10072 | |
| 10073 | return 0; |
| 10074 | } |
| 10075 | |
| 10076 | static void intel_set_config_restore_state(struct drm_device *dev, |
| 10077 | struct intel_set_config *config) |
| 10078 | { |
| 10079 | struct intel_crtc *crtc; |
| 10080 | struct intel_encoder *encoder; |
| 10081 | struct intel_connector *connector; |
| 10082 | int count; |
| 10083 | |
| 10084 | count = 0; |
| 10085 | list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head) { |
| 10086 | crtc->new_enabled = config->save_crtc_enabled[count++]; |
| 10087 | |
| 10088 | if (crtc->new_enabled) |
| 10089 | crtc->new_config = &crtc->config; |
| 10090 | else |
| 10091 | crtc->new_config = NULL; |
| 10092 | } |
| 10093 | |
| 10094 | count = 0; |
| 10095 | list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) { |
| 10096 | encoder->new_crtc = |
| 10097 | to_intel_crtc(config->save_encoder_crtcs[count++]); |
| 10098 | } |
| 10099 | |
| 10100 | count = 0; |
| 10101 | list_for_each_entry(connector, &dev->mode_config.connector_list, base.head) { |
| 10102 | connector->new_encoder = |
| 10103 | to_intel_encoder(config->save_connector_encoders[count++]); |
| 10104 | } |
| 10105 | } |
| 10106 | |
| 10107 | static bool |
| 10108 | is_crtc_connector_off(struct drm_mode_set *set) |
| 10109 | { |
| 10110 | int i; |
| 10111 | |
| 10112 | if (set->num_connectors == 0) |
| 10113 | return false; |
| 10114 | |
| 10115 | if (WARN_ON(set->connectors == NULL)) |
| 10116 | return false; |
| 10117 | |
| 10118 | for (i = 0; i < set->num_connectors; i++) |
| 10119 | if (set->connectors[i]->encoder && |
| 10120 | set->connectors[i]->encoder->crtc == set->crtc && |
| 10121 | set->connectors[i]->dpms != DRM_MODE_DPMS_ON) |
| 10122 | return true; |
| 10123 | |
| 10124 | return false; |
| 10125 | } |
| 10126 | |
| 10127 | static void |
| 10128 | intel_set_config_compute_mode_changes(struct drm_mode_set *set, |
| 10129 | struct intel_set_config *config) |
| 10130 | { |
| 10131 | |
| 10132 | /* We should be able to check here if the fb has the same properties |
| 10133 | * and then just flip_or_move it */ |
| 10134 | if (is_crtc_connector_off(set)) { |
| 10135 | config->mode_changed = true; |
| 10136 | } else if (set->crtc->fb != set->fb) { |
| 10137 | /* If we have no fb then treat it as a full mode set */ |
| 10138 | if (set->crtc->fb == NULL) { |
| 10139 | struct intel_crtc *intel_crtc = |
| 10140 | to_intel_crtc(set->crtc); |
| 10141 | |
| 10142 | if (intel_crtc->active && i915.fastboot) { |
| 10143 | DRM_DEBUG_KMS("crtc has no fb, will flip\n"); |
| 10144 | config->fb_changed = true; |
| 10145 | } else { |
| 10146 | DRM_DEBUG_KMS("inactive crtc, full mode set\n"); |
| 10147 | config->mode_changed = true; |
| 10148 | } |
| 10149 | } else if (set->fb == NULL) { |
| 10150 | config->mode_changed = true; |
| 10151 | } else if (set->fb->pixel_format != |
| 10152 | set->crtc->fb->pixel_format) { |
| 10153 | config->mode_changed = true; |
| 10154 | } else { |
| 10155 | config->fb_changed = true; |
| 10156 | } |
| 10157 | } |
| 10158 | |
| 10159 | if (set->fb && (set->x != set->crtc->x || set->y != set->crtc->y)) |
| 10160 | config->fb_changed = true; |
| 10161 | |
| 10162 | if (set->mode && !drm_mode_equal(set->mode, &set->crtc->mode)) { |
| 10163 | DRM_DEBUG_KMS("modes are different, full mode set\n"); |
| 10164 | drm_mode_debug_printmodeline(&set->crtc->mode); |
| 10165 | drm_mode_debug_printmodeline(set->mode); |
| 10166 | config->mode_changed = true; |
| 10167 | } |
| 10168 | |
| 10169 | DRM_DEBUG_KMS("computed changes for [CRTC:%d], mode_changed=%d, fb_changed=%d\n", |
| 10170 | set->crtc->base.id, config->mode_changed, config->fb_changed); |
| 10171 | } |
| 10172 | |
| 10173 | static int |
| 10174 | intel_modeset_stage_output_state(struct drm_device *dev, |
| 10175 | struct drm_mode_set *set, |
| 10176 | struct intel_set_config *config) |
| 10177 | { |
| 10178 | struct intel_connector *connector; |
| 10179 | struct intel_encoder *encoder; |
| 10180 | struct intel_crtc *crtc; |
| 10181 | int ro; |
| 10182 | |
| 10183 | /* The upper layers ensure that we either disable a crtc or have a list |
| 10184 | * of connectors. For paranoia, double-check this. */ |
| 10185 | WARN_ON(!set->fb && (set->num_connectors != 0)); |
| 10186 | WARN_ON(set->fb && (set->num_connectors == 0)); |
| 10187 | |
| 10188 | list_for_each_entry(connector, &dev->mode_config.connector_list, |
| 10189 | base.head) { |
| 10190 | /* Otherwise traverse passed in connector list and get encoders |
| 10191 | * for them. */ |
| 10192 | for (ro = 0; ro < set->num_connectors; ro++) { |
| 10193 | if (set->connectors[ro] == &connector->base) { |
| 10194 | connector->new_encoder = connector->encoder; |
| 10195 | break; |
| 10196 | } |
| 10197 | } |
| 10198 | |
| 10199 | /* If we disable the crtc, disable all its connectors. Also, if |
| 10200 | * the connector is on the changing crtc but not on the new |
| 10201 | * connector list, disable it. */ |
| 10202 | if ((!set->fb || ro == set->num_connectors) && |
| 10203 | connector->base.encoder && |
| 10204 | connector->base.encoder->crtc == set->crtc) { |
| 10205 | connector->new_encoder = NULL; |
| 10206 | |
| 10207 | DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [NOCRTC]\n", |
| 10208 | connector->base.base.id, |
| 10209 | drm_get_connector_name(&connector->base)); |
| 10210 | } |
| 10211 | |
| 10212 | |
| 10213 | if (&connector->new_encoder->base != connector->base.encoder) { |
| 10214 | DRM_DEBUG_KMS("encoder changed, full mode switch\n"); |
| 10215 | config->mode_changed = true; |
| 10216 | } |
| 10217 | } |
| 10218 | /* connector->new_encoder is now updated for all connectors. */ |
| 10219 | |
| 10220 | /* Update crtc of enabled connectors. */ |
| 10221 | list_for_each_entry(connector, &dev->mode_config.connector_list, |
| 10222 | base.head) { |
| 10223 | struct drm_crtc *new_crtc; |
| 10224 | |
| 10225 | if (!connector->new_encoder) |
| 10226 | continue; |
| 10227 | |
| 10228 | new_crtc = connector->new_encoder->base.crtc; |
| 10229 | |
| 10230 | for (ro = 0; ro < set->num_connectors; ro++) { |
| 10231 | if (set->connectors[ro] == &connector->base) |
| 10232 | new_crtc = set->crtc; |
| 10233 | } |
| 10234 | |
| 10235 | /* Make sure the new CRTC will work with the encoder */ |
| 10236 | if (!drm_encoder_crtc_ok(&connector->new_encoder->base, |
| 10237 | new_crtc)) { |
| 10238 | return -EINVAL; |
| 10239 | } |
| 10240 | connector->encoder->new_crtc = to_intel_crtc(new_crtc); |
| 10241 | |
| 10242 | DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [CRTC:%d]\n", |
| 10243 | connector->base.base.id, |
| 10244 | drm_get_connector_name(&connector->base), |
| 10245 | new_crtc->base.id); |
| 10246 | } |
| 10247 | |
| 10248 | /* Check for any encoders that needs to be disabled. */ |
| 10249 | list_for_each_entry(encoder, &dev->mode_config.encoder_list, |
| 10250 | base.head) { |
| 10251 | int num_connectors = 0; |
| 10252 | list_for_each_entry(connector, |
| 10253 | &dev->mode_config.connector_list, |
| 10254 | base.head) { |
| 10255 | if (connector->new_encoder == encoder) { |
| 10256 | WARN_ON(!connector->new_encoder->new_crtc); |
| 10257 | num_connectors++; |
| 10258 | } |
| 10259 | } |
| 10260 | |
| 10261 | if (num_connectors == 0) |
| 10262 | encoder->new_crtc = NULL; |
| 10263 | else if (num_connectors > 1) |
| 10264 | return -EINVAL; |
| 10265 | |
| 10266 | /* Only now check for crtc changes so we don't miss encoders |
| 10267 | * that will be disabled. */ |
| 10268 | if (&encoder->new_crtc->base != encoder->base.crtc) { |
| 10269 | DRM_DEBUG_KMS("crtc changed, full mode switch\n"); |
| 10270 | config->mode_changed = true; |
| 10271 | } |
| 10272 | } |
| 10273 | /* Now we've also updated encoder->new_crtc for all encoders. */ |
| 10274 | |
| 10275 | list_for_each_entry(crtc, &dev->mode_config.crtc_list, |
| 10276 | base.head) { |
| 10277 | crtc->new_enabled = false; |
| 10278 | |
| 10279 | list_for_each_entry(encoder, |
| 10280 | &dev->mode_config.encoder_list, |
| 10281 | base.head) { |
| 10282 | if (encoder->new_crtc == crtc) { |
| 10283 | crtc->new_enabled = true; |
| 10284 | break; |
| 10285 | } |
| 10286 | } |
| 10287 | |
| 10288 | if (crtc->new_enabled != crtc->base.enabled) { |
| 10289 | DRM_DEBUG_KMS("crtc %sabled, full mode switch\n", |
| 10290 | crtc->new_enabled ? "en" : "dis"); |
| 10291 | config->mode_changed = true; |
| 10292 | } |
| 10293 | |
| 10294 | if (crtc->new_enabled) |
| 10295 | crtc->new_config = &crtc->config; |
| 10296 | else |
| 10297 | crtc->new_config = NULL; |
| 10298 | } |
| 10299 | |
| 10300 | return 0; |
| 10301 | } |
| 10302 | |
| 10303 | static void disable_crtc_nofb(struct intel_crtc *crtc) |
| 10304 | { |
| 10305 | struct drm_device *dev = crtc->base.dev; |
| 10306 | struct intel_encoder *encoder; |
| 10307 | struct intel_connector *connector; |
| 10308 | |
| 10309 | DRM_DEBUG_KMS("Trying to restore without FB -> disabling pipe %c\n", |
| 10310 | pipe_name(crtc->pipe)); |
| 10311 | |
| 10312 | list_for_each_entry(connector, &dev->mode_config.connector_list, base.head) { |
| 10313 | if (connector->new_encoder && |
| 10314 | connector->new_encoder->new_crtc == crtc) |
| 10315 | connector->new_encoder = NULL; |
| 10316 | } |
| 10317 | |
| 10318 | list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) { |
| 10319 | if (encoder->new_crtc == crtc) |
| 10320 | encoder->new_crtc = NULL; |
| 10321 | } |
| 10322 | |
| 10323 | crtc->new_enabled = false; |
| 10324 | crtc->new_config = NULL; |
| 10325 | } |
| 10326 | |
| 10327 | static int intel_crtc_set_config(struct drm_mode_set *set) |
| 10328 | { |
| 10329 | struct drm_device *dev; |
| 10330 | struct drm_mode_set save_set; |
| 10331 | struct intel_set_config *config; |
| 10332 | int ret; |
| 10333 | |
| 10334 | BUG_ON(!set); |
| 10335 | BUG_ON(!set->crtc); |
| 10336 | BUG_ON(!set->crtc->helper_private); |
| 10337 | |
| 10338 | /* Enforce sane interface api - has been abused by the fb helper. */ |
| 10339 | BUG_ON(!set->mode && set->fb); |
| 10340 | BUG_ON(set->fb && set->num_connectors == 0); |
| 10341 | |
| 10342 | if (set->fb) { |
| 10343 | DRM_DEBUG_KMS("[CRTC:%d] [FB:%d] #connectors=%d (x y) (%i %i)\n", |
| 10344 | set->crtc->base.id, set->fb->base.id, |
| 10345 | (int)set->num_connectors, set->x, set->y); |
| 10346 | } else { |
| 10347 | DRM_DEBUG_KMS("[CRTC:%d] [NOFB]\n", set->crtc->base.id); |
| 10348 | } |
| 10349 | |
| 10350 | dev = set->crtc->dev; |
| 10351 | |
| 10352 | ret = -ENOMEM; |
| 10353 | config = kzalloc(sizeof(*config), GFP_KERNEL); |
| 10354 | if (!config) |
| 10355 | goto out_config; |
| 10356 | |
| 10357 | ret = intel_set_config_save_state(dev, config); |
| 10358 | if (ret) |
| 10359 | goto out_config; |
| 10360 | |
| 10361 | save_set.crtc = set->crtc; |
| 10362 | save_set.mode = &set->crtc->mode; |
| 10363 | save_set.x = set->crtc->x; |
| 10364 | save_set.y = set->crtc->y; |
| 10365 | save_set.fb = set->crtc->fb; |
| 10366 | |
| 10367 | /* Compute whether we need a full modeset, only an fb base update or no |
| 10368 | * change at all. In the future we might also check whether only the |
| 10369 | * mode changed, e.g. for LVDS where we only change the panel fitter in |
| 10370 | * such cases. */ |
| 10371 | intel_set_config_compute_mode_changes(set, config); |
| 10372 | |
| 10373 | ret = intel_modeset_stage_output_state(dev, set, config); |
| 10374 | if (ret) |
| 10375 | goto fail; |
| 10376 | |
| 10377 | if (config->mode_changed) { |
| 10378 | ret = intel_set_mode(set->crtc, set->mode, |
| 10379 | set->x, set->y, set->fb); |
| 10380 | } else if (config->fb_changed) { |
| 10381 | intel_crtc_wait_for_pending_flips(set->crtc); |
| 10382 | |
| 10383 | ret = intel_pipe_set_base(set->crtc, |
| 10384 | set->x, set->y, set->fb); |
| 10385 | /* |
| 10386 | * In the fastboot case this may be our only check of the |
| 10387 | * state after boot. It would be better to only do it on |
| 10388 | * the first update, but we don't have a nice way of doing that |
| 10389 | * (and really, set_config isn't used much for high freq page |
| 10390 | * flipping, so increasing its cost here shouldn't be a big |
| 10391 | * deal). |
| 10392 | */ |
| 10393 | if (i915.fastboot && ret == 0) |
| 10394 | intel_modeset_check_state(set->crtc->dev); |
| 10395 | } |
| 10396 | |
| 10397 | if (ret) { |
| 10398 | DRM_DEBUG_KMS("failed to set mode on [CRTC:%d], err = %d\n", |
| 10399 | set->crtc->base.id, ret); |
| 10400 | fail: |
| 10401 | intel_set_config_restore_state(dev, config); |
| 10402 | |
| 10403 | /* |
| 10404 | * HACK: if the pipe was on, but we didn't have a framebuffer, |
| 10405 | * force the pipe off to avoid oopsing in the modeset code |
| 10406 | * due to fb==NULL. This should only happen during boot since |
| 10407 | * we don't yet reconstruct the FB from the hardware state. |
| 10408 | */ |
| 10409 | if (to_intel_crtc(save_set.crtc)->new_enabled && !save_set.fb) |
| 10410 | disable_crtc_nofb(to_intel_crtc(save_set.crtc)); |
| 10411 | |
| 10412 | /* Try to restore the config */ |
| 10413 | if (config->mode_changed && |
| 10414 | intel_set_mode(save_set.crtc, save_set.mode, |
| 10415 | save_set.x, save_set.y, save_set.fb)) |
| 10416 | DRM_ERROR("failed to restore config after modeset failure\n"); |
| 10417 | } |
| 10418 | |
| 10419 | out_config: |
| 10420 | intel_set_config_free(config); |
| 10421 | return ret; |
| 10422 | } |
| 10423 | |
| 10424 | static const struct drm_crtc_funcs intel_crtc_funcs = { |
| 10425 | .cursor_set = intel_crtc_cursor_set, |
| 10426 | .cursor_move = intel_crtc_cursor_move, |
| 10427 | .gamma_set = intel_crtc_gamma_set, |
| 10428 | .set_config = intel_crtc_set_config, |
| 10429 | .destroy = intel_crtc_destroy, |
| 10430 | .page_flip = intel_crtc_page_flip, |
| 10431 | }; |
| 10432 | |
| 10433 | static void intel_cpu_pll_init(struct drm_device *dev) |
| 10434 | { |
| 10435 | if (HAS_DDI(dev)) |
| 10436 | intel_ddi_pll_init(dev); |
| 10437 | } |
| 10438 | |
| 10439 | static bool ibx_pch_dpll_get_hw_state(struct drm_i915_private *dev_priv, |
| 10440 | struct intel_shared_dpll *pll, |
| 10441 | struct intel_dpll_hw_state *hw_state) |
| 10442 | { |
| 10443 | uint32_t val; |
| 10444 | |
| 10445 | val = I915_READ(PCH_DPLL(pll->id)); |
| 10446 | hw_state->dpll = val; |
| 10447 | hw_state->fp0 = I915_READ(PCH_FP0(pll->id)); |
| 10448 | hw_state->fp1 = I915_READ(PCH_FP1(pll->id)); |
| 10449 | |
| 10450 | return val & DPLL_VCO_ENABLE; |
| 10451 | } |
| 10452 | |
| 10453 | static void ibx_pch_dpll_mode_set(struct drm_i915_private *dev_priv, |
| 10454 | struct intel_shared_dpll *pll) |
| 10455 | { |
| 10456 | I915_WRITE(PCH_FP0(pll->id), pll->hw_state.fp0); |
| 10457 | I915_WRITE(PCH_FP1(pll->id), pll->hw_state.fp1); |
| 10458 | } |
| 10459 | |
| 10460 | static void ibx_pch_dpll_enable(struct drm_i915_private *dev_priv, |
| 10461 | struct intel_shared_dpll *pll) |
| 10462 | { |
| 10463 | /* PCH refclock must be enabled first */ |
| 10464 | ibx_assert_pch_refclk_enabled(dev_priv); |
| 10465 | |
| 10466 | I915_WRITE(PCH_DPLL(pll->id), pll->hw_state.dpll); |
| 10467 | |
| 10468 | /* Wait for the clocks to stabilize. */ |
| 10469 | POSTING_READ(PCH_DPLL(pll->id)); |
| 10470 | udelay(150); |
| 10471 | |
| 10472 | /* The pixel multiplier can only be updated once the |
| 10473 | * DPLL is enabled and the clocks are stable. |
| 10474 | * |
| 10475 | * So write it again. |
| 10476 | */ |
| 10477 | I915_WRITE(PCH_DPLL(pll->id), pll->hw_state.dpll); |
| 10478 | POSTING_READ(PCH_DPLL(pll->id)); |
| 10479 | udelay(200); |
| 10480 | } |
| 10481 | |
| 10482 | static void ibx_pch_dpll_disable(struct drm_i915_private *dev_priv, |
| 10483 | struct intel_shared_dpll *pll) |
| 10484 | { |
| 10485 | struct drm_device *dev = dev_priv->dev; |
| 10486 | struct intel_crtc *crtc; |
| 10487 | |
| 10488 | /* Make sure no transcoder isn't still depending on us. */ |
| 10489 | list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head) { |
| 10490 | if (intel_crtc_to_shared_dpll(crtc) == pll) |
| 10491 | assert_pch_transcoder_disabled(dev_priv, crtc->pipe); |
| 10492 | } |
| 10493 | |
| 10494 | I915_WRITE(PCH_DPLL(pll->id), 0); |
| 10495 | POSTING_READ(PCH_DPLL(pll->id)); |
| 10496 | udelay(200); |
| 10497 | } |
| 10498 | |
| 10499 | static char *ibx_pch_dpll_names[] = { |
| 10500 | "PCH DPLL A", |
| 10501 | "PCH DPLL B", |
| 10502 | }; |
| 10503 | |
| 10504 | static void ibx_pch_dpll_init(struct drm_device *dev) |
| 10505 | { |
| 10506 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 10507 | int i; |
| 10508 | |
| 10509 | dev_priv->num_shared_dpll = 2; |
| 10510 | |
| 10511 | for (i = 0; i < dev_priv->num_shared_dpll; i++) { |
| 10512 | dev_priv->shared_dplls[i].id = i; |
| 10513 | dev_priv->shared_dplls[i].name = ibx_pch_dpll_names[i]; |
| 10514 | dev_priv->shared_dplls[i].mode_set = ibx_pch_dpll_mode_set; |
| 10515 | dev_priv->shared_dplls[i].enable = ibx_pch_dpll_enable; |
| 10516 | dev_priv->shared_dplls[i].disable = ibx_pch_dpll_disable; |
| 10517 | dev_priv->shared_dplls[i].get_hw_state = |
| 10518 | ibx_pch_dpll_get_hw_state; |
| 10519 | } |
| 10520 | } |
| 10521 | |
| 10522 | static void intel_shared_dpll_init(struct drm_device *dev) |
| 10523 | { |
| 10524 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 10525 | |
| 10526 | if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) |
| 10527 | ibx_pch_dpll_init(dev); |
| 10528 | else |
| 10529 | dev_priv->num_shared_dpll = 0; |
| 10530 | |
| 10531 | BUG_ON(dev_priv->num_shared_dpll > I915_NUM_PLLS); |
| 10532 | } |
| 10533 | |
| 10534 | static void intel_crtc_init(struct drm_device *dev, int pipe) |
| 10535 | { |
| 10536 | drm_i915_private_t *dev_priv = dev->dev_private; |
| 10537 | struct intel_crtc *intel_crtc; |
| 10538 | int i; |
| 10539 | |
| 10540 | intel_crtc = kzalloc(sizeof(*intel_crtc), GFP_KERNEL); |
| 10541 | if (intel_crtc == NULL) |
| 10542 | return; |
| 10543 | |
| 10544 | drm_crtc_init(dev, &intel_crtc->base, &intel_crtc_funcs); |
| 10545 | |
| 10546 | drm_mode_crtc_set_gamma_size(&intel_crtc->base, 256); |
| 10547 | for (i = 0; i < 256; i++) { |
| 10548 | intel_crtc->lut_r[i] = i; |
| 10549 | intel_crtc->lut_g[i] = i; |
| 10550 | intel_crtc->lut_b[i] = i; |
| 10551 | } |
| 10552 | |
| 10553 | /* |
| 10554 | * On gen2/3 only plane A can do fbc, but the panel fitter and lvds port |
| 10555 | * is hooked to plane B. Hence we want plane A feeding pipe B. |
| 10556 | */ |
| 10557 | intel_crtc->pipe = pipe; |
| 10558 | intel_crtc->plane = pipe; |
| 10559 | if (HAS_FBC(dev) && INTEL_INFO(dev)->gen < 4) { |
| 10560 | DRM_DEBUG_KMS("swapping pipes & planes for FBC\n"); |
| 10561 | intel_crtc->plane = !pipe; |
| 10562 | } |
| 10563 | |
| 10564 | BUG_ON(pipe >= ARRAY_SIZE(dev_priv->plane_to_crtc_mapping) || |
| 10565 | dev_priv->plane_to_crtc_mapping[intel_crtc->plane] != NULL); |
| 10566 | dev_priv->plane_to_crtc_mapping[intel_crtc->plane] = &intel_crtc->base; |
| 10567 | dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = &intel_crtc->base; |
| 10568 | |
| 10569 | drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs); |
| 10570 | } |
| 10571 | |
| 10572 | enum pipe intel_get_pipe_from_connector(struct intel_connector *connector) |
| 10573 | { |
| 10574 | struct drm_encoder *encoder = connector->base.encoder; |
| 10575 | |
| 10576 | WARN_ON(!mutex_is_locked(&connector->base.dev->mode_config.mutex)); |
| 10577 | |
| 10578 | if (!encoder) |
| 10579 | return INVALID_PIPE; |
| 10580 | |
| 10581 | return to_intel_crtc(encoder->crtc)->pipe; |
| 10582 | } |
| 10583 | |
| 10584 | int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data, |
| 10585 | struct drm_file *file) |
| 10586 | { |
| 10587 | struct drm_i915_get_pipe_from_crtc_id *pipe_from_crtc_id = data; |
| 10588 | struct drm_mode_object *drmmode_obj; |
| 10589 | struct intel_crtc *crtc; |
| 10590 | |
| 10591 | if (!drm_core_check_feature(dev, DRIVER_MODESET)) |
| 10592 | return -ENODEV; |
| 10593 | |
| 10594 | drmmode_obj = drm_mode_object_find(dev, pipe_from_crtc_id->crtc_id, |
| 10595 | DRM_MODE_OBJECT_CRTC); |
| 10596 | |
| 10597 | if (!drmmode_obj) { |
| 10598 | DRM_ERROR("no such CRTC id\n"); |
| 10599 | return -ENOENT; |
| 10600 | } |
| 10601 | |
| 10602 | crtc = to_intel_crtc(obj_to_crtc(drmmode_obj)); |
| 10603 | pipe_from_crtc_id->pipe = crtc->pipe; |
| 10604 | |
| 10605 | return 0; |
| 10606 | } |
| 10607 | |
| 10608 | static int intel_encoder_clones(struct intel_encoder *encoder) |
| 10609 | { |
| 10610 | struct drm_device *dev = encoder->base.dev; |
| 10611 | struct intel_encoder *source_encoder; |
| 10612 | int index_mask = 0; |
| 10613 | int entry = 0; |
| 10614 | |
| 10615 | list_for_each_entry(source_encoder, |
| 10616 | &dev->mode_config.encoder_list, base.head) { |
| 10617 | |
| 10618 | if (encoder == source_encoder) |
| 10619 | index_mask |= (1 << entry); |
| 10620 | |
| 10621 | /* Intel hw has only one MUX where enocoders could be cloned. */ |
| 10622 | if (encoder->cloneable && source_encoder->cloneable) |
| 10623 | index_mask |= (1 << entry); |
| 10624 | |
| 10625 | entry++; |
| 10626 | } |
| 10627 | |
| 10628 | return index_mask; |
| 10629 | } |
| 10630 | |
| 10631 | static bool has_edp_a(struct drm_device *dev) |
| 10632 | { |
| 10633 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 10634 | |
| 10635 | if (!IS_MOBILE(dev)) |
| 10636 | return false; |
| 10637 | |
| 10638 | if ((I915_READ(DP_A) & DP_DETECTED) == 0) |
| 10639 | return false; |
| 10640 | |
| 10641 | if (IS_GEN5(dev) && (I915_READ(FUSE_STRAP) & ILK_eDP_A_DISABLE)) |
| 10642 | return false; |
| 10643 | |
| 10644 | return true; |
| 10645 | } |
| 10646 | |
| 10647 | const char *intel_output_name(int output) |
| 10648 | { |
| 10649 | static const char *names[] = { |
| 10650 | [INTEL_OUTPUT_UNUSED] = "Unused", |
| 10651 | [INTEL_OUTPUT_ANALOG] = "Analog", |
| 10652 | [INTEL_OUTPUT_DVO] = "DVO", |
| 10653 | [INTEL_OUTPUT_SDVO] = "SDVO", |
| 10654 | [INTEL_OUTPUT_LVDS] = "LVDS", |
| 10655 | [INTEL_OUTPUT_TVOUT] = "TV", |
| 10656 | [INTEL_OUTPUT_HDMI] = "HDMI", |
| 10657 | [INTEL_OUTPUT_DISPLAYPORT] = "DisplayPort", |
| 10658 | [INTEL_OUTPUT_EDP] = "eDP", |
| 10659 | [INTEL_OUTPUT_DSI] = "DSI", |
| 10660 | [INTEL_OUTPUT_UNKNOWN] = "Unknown", |
| 10661 | }; |
| 10662 | |
| 10663 | if (output < 0 || output >= ARRAY_SIZE(names) || !names[output]) |
| 10664 | return "Invalid"; |
| 10665 | |
| 10666 | return names[output]; |
| 10667 | } |
| 10668 | |
| 10669 | static void intel_setup_outputs(struct drm_device *dev) |
| 10670 | { |
| 10671 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 10672 | struct intel_encoder *encoder; |
| 10673 | bool dpd_is_edp = false; |
| 10674 | |
| 10675 | intel_lvds_init(dev); |
| 10676 | |
| 10677 | if (!IS_ULT(dev)) |
| 10678 | intel_crt_init(dev); |
| 10679 | |
| 10680 | if (HAS_DDI(dev)) { |
| 10681 | int found; |
| 10682 | |
| 10683 | /* Haswell uses DDI functions to detect digital outputs */ |
| 10684 | found = I915_READ(DDI_BUF_CTL_A) & DDI_INIT_DISPLAY_DETECTED; |
| 10685 | /* DDI A only supports eDP */ |
| 10686 | if (found) |
| 10687 | intel_ddi_init(dev, PORT_A); |
| 10688 | |
| 10689 | /* DDI B, C and D detection is indicated by the SFUSE_STRAP |
| 10690 | * register */ |
| 10691 | found = I915_READ(SFUSE_STRAP); |
| 10692 | |
| 10693 | if (found & SFUSE_STRAP_DDIB_DETECTED) |
| 10694 | intel_ddi_init(dev, PORT_B); |
| 10695 | if (found & SFUSE_STRAP_DDIC_DETECTED) |
| 10696 | intel_ddi_init(dev, PORT_C); |
| 10697 | if (found & SFUSE_STRAP_DDID_DETECTED) |
| 10698 | intel_ddi_init(dev, PORT_D); |
| 10699 | } else if (HAS_PCH_SPLIT(dev)) { |
| 10700 | int found; |
| 10701 | dpd_is_edp = intel_dp_is_edp(dev, PORT_D); |
| 10702 | |
| 10703 | if (has_edp_a(dev)) |
| 10704 | intel_dp_init(dev, DP_A, PORT_A); |
| 10705 | |
| 10706 | if (I915_READ(PCH_HDMIB) & SDVO_DETECTED) { |
| 10707 | /* PCH SDVOB multiplex with HDMIB */ |
| 10708 | found = intel_sdvo_init(dev, PCH_SDVOB, true); |
| 10709 | if (!found) |
| 10710 | intel_hdmi_init(dev, PCH_HDMIB, PORT_B); |
| 10711 | if (!found && (I915_READ(PCH_DP_B) & DP_DETECTED)) |
| 10712 | intel_dp_init(dev, PCH_DP_B, PORT_B); |
| 10713 | } |
| 10714 | |
| 10715 | if (I915_READ(PCH_HDMIC) & SDVO_DETECTED) |
| 10716 | intel_hdmi_init(dev, PCH_HDMIC, PORT_C); |
| 10717 | |
| 10718 | if (!dpd_is_edp && I915_READ(PCH_HDMID) & SDVO_DETECTED) |
| 10719 | intel_hdmi_init(dev, PCH_HDMID, PORT_D); |
| 10720 | |
| 10721 | if (I915_READ(PCH_DP_C) & DP_DETECTED) |
| 10722 | intel_dp_init(dev, PCH_DP_C, PORT_C); |
| 10723 | |
| 10724 | if (I915_READ(PCH_DP_D) & DP_DETECTED) |
| 10725 | intel_dp_init(dev, PCH_DP_D, PORT_D); |
| 10726 | } else if (IS_VALLEYVIEW(dev)) { |
| 10727 | if (I915_READ(VLV_DISPLAY_BASE + GEN4_HDMIB) & SDVO_DETECTED) { |
| 10728 | intel_hdmi_init(dev, VLV_DISPLAY_BASE + GEN4_HDMIB, |
| 10729 | PORT_B); |
| 10730 | if (I915_READ(VLV_DISPLAY_BASE + DP_B) & DP_DETECTED) |
| 10731 | intel_dp_init(dev, VLV_DISPLAY_BASE + DP_B, PORT_B); |
| 10732 | } |
| 10733 | |
| 10734 | if (I915_READ(VLV_DISPLAY_BASE + GEN4_HDMIC) & SDVO_DETECTED) { |
| 10735 | intel_hdmi_init(dev, VLV_DISPLAY_BASE + GEN4_HDMIC, |
| 10736 | PORT_C); |
| 10737 | if (I915_READ(VLV_DISPLAY_BASE + DP_C) & DP_DETECTED) |
| 10738 | intel_dp_init(dev, VLV_DISPLAY_BASE + DP_C, PORT_C); |
| 10739 | } |
| 10740 | |
| 10741 | intel_dsi_init(dev); |
| 10742 | } else if (SUPPORTS_DIGITAL_OUTPUTS(dev)) { |
| 10743 | bool found = false; |
| 10744 | |
| 10745 | if (I915_READ(GEN3_SDVOB) & SDVO_DETECTED) { |
| 10746 | DRM_DEBUG_KMS("probing SDVOB\n"); |
| 10747 | found = intel_sdvo_init(dev, GEN3_SDVOB, true); |
| 10748 | if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) { |
| 10749 | DRM_DEBUG_KMS("probing HDMI on SDVOB\n"); |
| 10750 | intel_hdmi_init(dev, GEN4_HDMIB, PORT_B); |
| 10751 | } |
| 10752 | |
| 10753 | if (!found && SUPPORTS_INTEGRATED_DP(dev)) |
| 10754 | intel_dp_init(dev, DP_B, PORT_B); |
| 10755 | } |
| 10756 | |
| 10757 | /* Before G4X SDVOC doesn't have its own detect register */ |
| 10758 | |
| 10759 | if (I915_READ(GEN3_SDVOB) & SDVO_DETECTED) { |
| 10760 | DRM_DEBUG_KMS("probing SDVOC\n"); |
| 10761 | found = intel_sdvo_init(dev, GEN3_SDVOC, false); |
| 10762 | } |
| 10763 | |
| 10764 | if (!found && (I915_READ(GEN3_SDVOC) & SDVO_DETECTED)) { |
| 10765 | |
| 10766 | if (SUPPORTS_INTEGRATED_HDMI(dev)) { |
| 10767 | DRM_DEBUG_KMS("probing HDMI on SDVOC\n"); |
| 10768 | intel_hdmi_init(dev, GEN4_HDMIC, PORT_C); |
| 10769 | } |
| 10770 | if (SUPPORTS_INTEGRATED_DP(dev)) |
| 10771 | intel_dp_init(dev, DP_C, PORT_C); |
| 10772 | } |
| 10773 | |
| 10774 | if (SUPPORTS_INTEGRATED_DP(dev) && |
| 10775 | (I915_READ(DP_D) & DP_DETECTED)) |
| 10776 | intel_dp_init(dev, DP_D, PORT_D); |
| 10777 | } else if (IS_GEN2(dev)) |
| 10778 | intel_dvo_init(dev); |
| 10779 | |
| 10780 | if (SUPPORTS_TV(dev)) |
| 10781 | intel_tv_init(dev); |
| 10782 | |
| 10783 | list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) { |
| 10784 | encoder->base.possible_crtcs = encoder->crtc_mask; |
| 10785 | encoder->base.possible_clones = |
| 10786 | intel_encoder_clones(encoder); |
| 10787 | } |
| 10788 | |
| 10789 | intel_init_pch_refclk(dev); |
| 10790 | |
| 10791 | drm_helper_move_panel_connectors_to_head(dev); |
| 10792 | } |
| 10793 | |
| 10794 | static void intel_user_framebuffer_destroy(struct drm_framebuffer *fb) |
| 10795 | { |
| 10796 | struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb); |
| 10797 | |
| 10798 | drm_framebuffer_cleanup(fb); |
| 10799 | WARN_ON(!intel_fb->obj->framebuffer_references--); |
| 10800 | drm_gem_object_unreference_unlocked(&intel_fb->obj->base); |
| 10801 | kfree(intel_fb); |
| 10802 | } |
| 10803 | |
| 10804 | static int intel_user_framebuffer_create_handle(struct drm_framebuffer *fb, |
| 10805 | struct drm_file *file, |
| 10806 | unsigned int *handle) |
| 10807 | { |
| 10808 | struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb); |
| 10809 | struct drm_i915_gem_object *obj = intel_fb->obj; |
| 10810 | |
| 10811 | return drm_gem_handle_create(file, &obj->base, handle); |
| 10812 | } |
| 10813 | |
| 10814 | static const struct drm_framebuffer_funcs intel_fb_funcs = { |
| 10815 | .destroy = intel_user_framebuffer_destroy, |
| 10816 | .create_handle = intel_user_framebuffer_create_handle, |
| 10817 | }; |
| 10818 | |
| 10819 | static int intel_framebuffer_init(struct drm_device *dev, |
| 10820 | struct intel_framebuffer *intel_fb, |
| 10821 | struct drm_mode_fb_cmd2 *mode_cmd, |
| 10822 | struct drm_i915_gem_object *obj) |
| 10823 | { |
| 10824 | int aligned_height; |
| 10825 | int pitch_limit; |
| 10826 | int ret; |
| 10827 | |
| 10828 | WARN_ON(!mutex_is_locked(&dev->struct_mutex)); |
| 10829 | |
| 10830 | if (obj->tiling_mode == I915_TILING_Y) { |
| 10831 | DRM_DEBUG("hardware does not support tiling Y\n"); |
| 10832 | return -EINVAL; |
| 10833 | } |
| 10834 | |
| 10835 | if (mode_cmd->pitches[0] & 63) { |
| 10836 | DRM_DEBUG("pitch (%d) must be at least 64 byte aligned\n", |
| 10837 | mode_cmd->pitches[0]); |
| 10838 | return -EINVAL; |
| 10839 | } |
| 10840 | |
| 10841 | if (INTEL_INFO(dev)->gen >= 5 && !IS_VALLEYVIEW(dev)) { |
| 10842 | pitch_limit = 32*1024; |
| 10843 | } else if (INTEL_INFO(dev)->gen >= 4) { |
| 10844 | if (obj->tiling_mode) |
| 10845 | pitch_limit = 16*1024; |
| 10846 | else |
| 10847 | pitch_limit = 32*1024; |
| 10848 | } else if (INTEL_INFO(dev)->gen >= 3) { |
| 10849 | if (obj->tiling_mode) |
| 10850 | pitch_limit = 8*1024; |
| 10851 | else |
| 10852 | pitch_limit = 16*1024; |
| 10853 | } else |
| 10854 | /* XXX DSPC is limited to 4k tiled */ |
| 10855 | pitch_limit = 8*1024; |
| 10856 | |
| 10857 | if (mode_cmd->pitches[0] > pitch_limit) { |
| 10858 | DRM_DEBUG("%s pitch (%d) must be at less than %d\n", |
| 10859 | obj->tiling_mode ? "tiled" : "linear", |
| 10860 | mode_cmd->pitches[0], pitch_limit); |
| 10861 | return -EINVAL; |
| 10862 | } |
| 10863 | |
| 10864 | if (obj->tiling_mode != I915_TILING_NONE && |
| 10865 | mode_cmd->pitches[0] != obj->stride) { |
| 10866 | DRM_DEBUG("pitch (%d) must match tiling stride (%d)\n", |
| 10867 | mode_cmd->pitches[0], obj->stride); |
| 10868 | return -EINVAL; |
| 10869 | } |
| 10870 | |
| 10871 | /* Reject formats not supported by any plane early. */ |
| 10872 | switch (mode_cmd->pixel_format) { |
| 10873 | case DRM_FORMAT_C8: |
| 10874 | case DRM_FORMAT_RGB565: |
| 10875 | case DRM_FORMAT_XRGB8888: |
| 10876 | case DRM_FORMAT_ARGB8888: |
| 10877 | break; |
| 10878 | case DRM_FORMAT_XRGB1555: |
| 10879 | case DRM_FORMAT_ARGB1555: |
| 10880 | if (INTEL_INFO(dev)->gen > 3) { |
| 10881 | DRM_DEBUG("unsupported pixel format: %s\n", |
| 10882 | drm_get_format_name(mode_cmd->pixel_format)); |
| 10883 | return -EINVAL; |
| 10884 | } |
| 10885 | break; |
| 10886 | case DRM_FORMAT_XBGR8888: |
| 10887 | case DRM_FORMAT_ABGR8888: |
| 10888 | case DRM_FORMAT_XRGB2101010: |
| 10889 | case DRM_FORMAT_ARGB2101010: |
| 10890 | case DRM_FORMAT_XBGR2101010: |
| 10891 | case DRM_FORMAT_ABGR2101010: |
| 10892 | if (INTEL_INFO(dev)->gen < 4) { |
| 10893 | DRM_DEBUG("unsupported pixel format: %s\n", |
| 10894 | drm_get_format_name(mode_cmd->pixel_format)); |
| 10895 | return -EINVAL; |
| 10896 | } |
| 10897 | break; |
| 10898 | case DRM_FORMAT_YUYV: |
| 10899 | case DRM_FORMAT_UYVY: |
| 10900 | case DRM_FORMAT_YVYU: |
| 10901 | case DRM_FORMAT_VYUY: |
| 10902 | if (INTEL_INFO(dev)->gen < 5) { |
| 10903 | DRM_DEBUG("unsupported pixel format: %s\n", |
| 10904 | drm_get_format_name(mode_cmd->pixel_format)); |
| 10905 | return -EINVAL; |
| 10906 | } |
| 10907 | break; |
| 10908 | default: |
| 10909 | DRM_DEBUG("unsupported pixel format: %s\n", |
| 10910 | drm_get_format_name(mode_cmd->pixel_format)); |
| 10911 | return -EINVAL; |
| 10912 | } |
| 10913 | |
| 10914 | /* FIXME need to adjust LINOFF/TILEOFF accordingly. */ |
| 10915 | if (mode_cmd->offsets[0] != 0) |
| 10916 | return -EINVAL; |
| 10917 | |
| 10918 | aligned_height = intel_align_height(dev, mode_cmd->height, |
| 10919 | obj->tiling_mode); |
| 10920 | /* FIXME drm helper for size checks (especially planar formats)? */ |
| 10921 | if (obj->base.size < aligned_height * mode_cmd->pitches[0]) |
| 10922 | return -EINVAL; |
| 10923 | |
| 10924 | drm_helper_mode_fill_fb_struct(&intel_fb->base, mode_cmd); |
| 10925 | intel_fb->obj = obj; |
| 10926 | intel_fb->obj->framebuffer_references++; |
| 10927 | |
| 10928 | ret = drm_framebuffer_init(dev, &intel_fb->base, &intel_fb_funcs); |
| 10929 | if (ret) { |
| 10930 | DRM_ERROR("framebuffer init failed %d\n", ret); |
| 10931 | return ret; |
| 10932 | } |
| 10933 | |
| 10934 | return 0; |
| 10935 | } |
| 10936 | |
| 10937 | static struct drm_framebuffer * |
| 10938 | intel_user_framebuffer_create(struct drm_device *dev, |
| 10939 | struct drm_file *filp, |
| 10940 | struct drm_mode_fb_cmd2 *mode_cmd) |
| 10941 | { |
| 10942 | struct drm_i915_gem_object *obj; |
| 10943 | |
| 10944 | obj = to_intel_bo(drm_gem_object_lookup(dev, filp, |
| 10945 | mode_cmd->handles[0])); |
| 10946 | if (&obj->base == NULL) |
| 10947 | return ERR_PTR(-ENOENT); |
| 10948 | |
| 10949 | return intel_framebuffer_create(dev, mode_cmd, obj); |
| 10950 | } |
| 10951 | |
| 10952 | #ifndef CONFIG_DRM_I915_FBDEV |
| 10953 | static inline void intel_fbdev_output_poll_changed(struct drm_device *dev) |
| 10954 | { |
| 10955 | } |
| 10956 | #endif |
| 10957 | |
| 10958 | static const struct drm_mode_config_funcs intel_mode_funcs = { |
| 10959 | .fb_create = intel_user_framebuffer_create, |
| 10960 | .output_poll_changed = intel_fbdev_output_poll_changed, |
| 10961 | }; |
| 10962 | |
| 10963 | /* Set up chip specific display functions */ |
| 10964 | static void intel_init_display(struct drm_device *dev) |
| 10965 | { |
| 10966 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 10967 | |
| 10968 | if (HAS_PCH_SPLIT(dev) || IS_G4X(dev)) |
| 10969 | dev_priv->display.find_dpll = g4x_find_best_dpll; |
| 10970 | else if (IS_VALLEYVIEW(dev)) |
| 10971 | dev_priv->display.find_dpll = vlv_find_best_dpll; |
| 10972 | else if (IS_PINEVIEW(dev)) |
| 10973 | dev_priv->display.find_dpll = pnv_find_best_dpll; |
| 10974 | else |
| 10975 | dev_priv->display.find_dpll = i9xx_find_best_dpll; |
| 10976 | |
| 10977 | if (HAS_DDI(dev)) { |
| 10978 | dev_priv->display.get_pipe_config = haswell_get_pipe_config; |
| 10979 | dev_priv->display.get_plane_config = ironlake_get_plane_config; |
| 10980 | dev_priv->display.crtc_mode_set = haswell_crtc_mode_set; |
| 10981 | dev_priv->display.crtc_enable = haswell_crtc_enable; |
| 10982 | dev_priv->display.crtc_disable = haswell_crtc_disable; |
| 10983 | dev_priv->display.off = haswell_crtc_off; |
| 10984 | dev_priv->display.update_plane = ironlake_update_plane; |
| 10985 | } else if (HAS_PCH_SPLIT(dev)) { |
| 10986 | dev_priv->display.get_pipe_config = ironlake_get_pipe_config; |
| 10987 | dev_priv->display.get_plane_config = ironlake_get_plane_config; |
| 10988 | dev_priv->display.crtc_mode_set = ironlake_crtc_mode_set; |
| 10989 | dev_priv->display.crtc_enable = ironlake_crtc_enable; |
| 10990 | dev_priv->display.crtc_disable = ironlake_crtc_disable; |
| 10991 | dev_priv->display.off = ironlake_crtc_off; |
| 10992 | dev_priv->display.update_plane = ironlake_update_plane; |
| 10993 | } else if (IS_VALLEYVIEW(dev)) { |
| 10994 | dev_priv->display.get_pipe_config = i9xx_get_pipe_config; |
| 10995 | dev_priv->display.get_plane_config = i9xx_get_plane_config; |
| 10996 | dev_priv->display.crtc_mode_set = i9xx_crtc_mode_set; |
| 10997 | dev_priv->display.crtc_enable = valleyview_crtc_enable; |
| 10998 | dev_priv->display.crtc_disable = i9xx_crtc_disable; |
| 10999 | dev_priv->display.off = i9xx_crtc_off; |
| 11000 | dev_priv->display.update_plane = i9xx_update_plane; |
| 11001 | } else { |
| 11002 | dev_priv->display.get_pipe_config = i9xx_get_pipe_config; |
| 11003 | dev_priv->display.get_plane_config = i9xx_get_plane_config; |
| 11004 | dev_priv->display.crtc_mode_set = i9xx_crtc_mode_set; |
| 11005 | dev_priv->display.crtc_enable = i9xx_crtc_enable; |
| 11006 | dev_priv->display.crtc_disable = i9xx_crtc_disable; |
| 11007 | dev_priv->display.off = i9xx_crtc_off; |
| 11008 | dev_priv->display.update_plane = i9xx_update_plane; |
| 11009 | } |
| 11010 | |
| 11011 | /* Returns the core display clock speed */ |
| 11012 | if (IS_VALLEYVIEW(dev)) |
| 11013 | dev_priv->display.get_display_clock_speed = |
| 11014 | valleyview_get_display_clock_speed; |
| 11015 | else if (IS_I945G(dev) || (IS_G33(dev) && !IS_PINEVIEW_M(dev))) |
| 11016 | dev_priv->display.get_display_clock_speed = |
| 11017 | i945_get_display_clock_speed; |
| 11018 | else if (IS_I915G(dev)) |
| 11019 | dev_priv->display.get_display_clock_speed = |
| 11020 | i915_get_display_clock_speed; |
| 11021 | else if (IS_I945GM(dev) || IS_845G(dev)) |
| 11022 | dev_priv->display.get_display_clock_speed = |
| 11023 | i9xx_misc_get_display_clock_speed; |
| 11024 | else if (IS_PINEVIEW(dev)) |
| 11025 | dev_priv->display.get_display_clock_speed = |
| 11026 | pnv_get_display_clock_speed; |
| 11027 | else if (IS_I915GM(dev)) |
| 11028 | dev_priv->display.get_display_clock_speed = |
| 11029 | i915gm_get_display_clock_speed; |
| 11030 | else if (IS_I865G(dev)) |
| 11031 | dev_priv->display.get_display_clock_speed = |
| 11032 | i865_get_display_clock_speed; |
| 11033 | else if (IS_I85X(dev)) |
| 11034 | dev_priv->display.get_display_clock_speed = |
| 11035 | i855_get_display_clock_speed; |
| 11036 | else /* 852, 830 */ |
| 11037 | dev_priv->display.get_display_clock_speed = |
| 11038 | i830_get_display_clock_speed; |
| 11039 | |
| 11040 | if (HAS_PCH_SPLIT(dev)) { |
| 11041 | if (IS_GEN5(dev)) { |
| 11042 | dev_priv->display.fdi_link_train = ironlake_fdi_link_train; |
| 11043 | dev_priv->display.write_eld = ironlake_write_eld; |
| 11044 | } else if (IS_GEN6(dev)) { |
| 11045 | dev_priv->display.fdi_link_train = gen6_fdi_link_train; |
| 11046 | dev_priv->display.write_eld = ironlake_write_eld; |
| 11047 | } else if (IS_IVYBRIDGE(dev)) { |
| 11048 | /* FIXME: detect B0+ stepping and use auto training */ |
| 11049 | dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train; |
| 11050 | dev_priv->display.write_eld = ironlake_write_eld; |
| 11051 | dev_priv->display.modeset_global_resources = |
| 11052 | ivb_modeset_global_resources; |
| 11053 | } else if (IS_HASWELL(dev) || IS_GEN8(dev)) { |
| 11054 | dev_priv->display.fdi_link_train = hsw_fdi_link_train; |
| 11055 | dev_priv->display.write_eld = haswell_write_eld; |
| 11056 | dev_priv->display.modeset_global_resources = |
| 11057 | haswell_modeset_global_resources; |
| 11058 | } |
| 11059 | } else if (IS_G4X(dev)) { |
| 11060 | dev_priv->display.write_eld = g4x_write_eld; |
| 11061 | } else if (IS_VALLEYVIEW(dev)) { |
| 11062 | dev_priv->display.modeset_global_resources = |
| 11063 | valleyview_modeset_global_resources; |
| 11064 | dev_priv->display.write_eld = ironlake_write_eld; |
| 11065 | } |
| 11066 | |
| 11067 | /* Default just returns -ENODEV to indicate unsupported */ |
| 11068 | dev_priv->display.queue_flip = intel_default_queue_flip; |
| 11069 | |
| 11070 | switch (INTEL_INFO(dev)->gen) { |
| 11071 | case 2: |
| 11072 | dev_priv->display.queue_flip = intel_gen2_queue_flip; |
| 11073 | break; |
| 11074 | |
| 11075 | case 3: |
| 11076 | dev_priv->display.queue_flip = intel_gen3_queue_flip; |
| 11077 | break; |
| 11078 | |
| 11079 | case 4: |
| 11080 | case 5: |
| 11081 | dev_priv->display.queue_flip = intel_gen4_queue_flip; |
| 11082 | break; |
| 11083 | |
| 11084 | case 6: |
| 11085 | dev_priv->display.queue_flip = intel_gen6_queue_flip; |
| 11086 | break; |
| 11087 | case 7: |
| 11088 | case 8: /* FIXME(BDW): Check that the gen8 RCS flip works. */ |
| 11089 | dev_priv->display.queue_flip = intel_gen7_queue_flip; |
| 11090 | break; |
| 11091 | } |
| 11092 | |
| 11093 | intel_panel_init_backlight_funcs(dev); |
| 11094 | } |
| 11095 | |
| 11096 | /* |
| 11097 | * Some BIOSes insist on assuming the GPU's pipe A is enabled at suspend, |
| 11098 | * resume, or other times. This quirk makes sure that's the case for |
| 11099 | * affected systems. |
| 11100 | */ |
| 11101 | static void quirk_pipea_force(struct drm_device *dev) |
| 11102 | { |
| 11103 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 11104 | |
| 11105 | dev_priv->quirks |= QUIRK_PIPEA_FORCE; |
| 11106 | DRM_INFO("applying pipe a force quirk\n"); |
| 11107 | } |
| 11108 | |
| 11109 | /* |
| 11110 | * Some machines (Lenovo U160) do not work with SSC on LVDS for some reason |
| 11111 | */ |
| 11112 | static void quirk_ssc_force_disable(struct drm_device *dev) |
| 11113 | { |
| 11114 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 11115 | dev_priv->quirks |= QUIRK_LVDS_SSC_DISABLE; |
| 11116 | DRM_INFO("applying lvds SSC disable quirk\n"); |
| 11117 | } |
| 11118 | |
| 11119 | /* |
| 11120 | * A machine (e.g. Acer Aspire 5734Z) may need to invert the panel backlight |
| 11121 | * brightness value |
| 11122 | */ |
| 11123 | static void quirk_invert_brightness(struct drm_device *dev) |
| 11124 | { |
| 11125 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 11126 | dev_priv->quirks |= QUIRK_INVERT_BRIGHTNESS; |
| 11127 | DRM_INFO("applying inverted panel brightness quirk\n"); |
| 11128 | } |
| 11129 | |
| 11130 | struct intel_quirk { |
| 11131 | int device; |
| 11132 | int subsystem_vendor; |
| 11133 | int subsystem_device; |
| 11134 | void (*hook)(struct drm_device *dev); |
| 11135 | }; |
| 11136 | |
| 11137 | /* For systems that don't have a meaningful PCI subdevice/subvendor ID */ |
| 11138 | struct intel_dmi_quirk { |
| 11139 | void (*hook)(struct drm_device *dev); |
| 11140 | const struct dmi_system_id (*dmi_id_list)[]; |
| 11141 | }; |
| 11142 | |
| 11143 | static int intel_dmi_reverse_brightness(const struct dmi_system_id *id) |
| 11144 | { |
| 11145 | DRM_INFO("Backlight polarity reversed on %s\n", id->ident); |
| 11146 | return 1; |
| 11147 | } |
| 11148 | |
| 11149 | static const struct intel_dmi_quirk intel_dmi_quirks[] = { |
| 11150 | { |
| 11151 | .dmi_id_list = &(const struct dmi_system_id[]) { |
| 11152 | { |
| 11153 | .callback = intel_dmi_reverse_brightness, |
| 11154 | .ident = "NCR Corporation", |
| 11155 | .matches = {DMI_MATCH(DMI_SYS_VENDOR, "NCR Corporation"), |
| 11156 | DMI_MATCH(DMI_PRODUCT_NAME, ""), |
| 11157 | }, |
| 11158 | }, |
| 11159 | { } /* terminating entry */ |
| 11160 | }, |
| 11161 | .hook = quirk_invert_brightness, |
| 11162 | }, |
| 11163 | }; |
| 11164 | |
| 11165 | static struct intel_quirk intel_quirks[] = { |
| 11166 | /* HP Mini needs pipe A force quirk (LP: #322104) */ |
| 11167 | { 0x27ae, 0x103c, 0x361a, quirk_pipea_force }, |
| 11168 | |
| 11169 | /* Toshiba Protege R-205, S-209 needs pipe A force quirk */ |
| 11170 | { 0x2592, 0x1179, 0x0001, quirk_pipea_force }, |
| 11171 | |
| 11172 | /* ThinkPad T60 needs pipe A force quirk (bug #16494) */ |
| 11173 | { 0x2782, 0x17aa, 0x201a, quirk_pipea_force }, |
| 11174 | |
| 11175 | /* 830 needs to leave pipe A & dpll A up */ |
| 11176 | { 0x3577, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force }, |
| 11177 | |
| 11178 | /* Lenovo U160 cannot use SSC on LVDS */ |
| 11179 | { 0x0046, 0x17aa, 0x3920, quirk_ssc_force_disable }, |
| 11180 | |
| 11181 | /* Sony Vaio Y cannot use SSC on LVDS */ |
| 11182 | { 0x0046, 0x104d, 0x9076, quirk_ssc_force_disable }, |
| 11183 | |
| 11184 | /* Acer Aspire 5734Z must invert backlight brightness */ |
| 11185 | { 0x2a42, 0x1025, 0x0459, quirk_invert_brightness }, |
| 11186 | |
| 11187 | /* Acer/eMachines G725 */ |
| 11188 | { 0x2a42, 0x1025, 0x0210, quirk_invert_brightness }, |
| 11189 | |
| 11190 | /* Acer/eMachines e725 */ |
| 11191 | { 0x2a42, 0x1025, 0x0212, quirk_invert_brightness }, |
| 11192 | |
| 11193 | /* Acer/Packard Bell NCL20 */ |
| 11194 | { 0x2a42, 0x1025, 0x034b, quirk_invert_brightness }, |
| 11195 | |
| 11196 | /* Acer Aspire 4736Z */ |
| 11197 | { 0x2a42, 0x1025, 0x0260, quirk_invert_brightness }, |
| 11198 | |
| 11199 | /* Acer Aspire 5336 */ |
| 11200 | { 0x2a42, 0x1025, 0x048a, quirk_invert_brightness }, |
| 11201 | }; |
| 11202 | |
| 11203 | static void intel_init_quirks(struct drm_device *dev) |
| 11204 | { |
| 11205 | struct pci_dev *d = dev->pdev; |
| 11206 | int i; |
| 11207 | |
| 11208 | for (i = 0; i < ARRAY_SIZE(intel_quirks); i++) { |
| 11209 | struct intel_quirk *q = &intel_quirks[i]; |
| 11210 | |
| 11211 | if (d->device == q->device && |
| 11212 | (d->subsystem_vendor == q->subsystem_vendor || |
| 11213 | q->subsystem_vendor == PCI_ANY_ID) && |
| 11214 | (d->subsystem_device == q->subsystem_device || |
| 11215 | q->subsystem_device == PCI_ANY_ID)) |
| 11216 | q->hook(dev); |
| 11217 | } |
| 11218 | for (i = 0; i < ARRAY_SIZE(intel_dmi_quirks); i++) { |
| 11219 | if (dmi_check_system(*intel_dmi_quirks[i].dmi_id_list) != 0) |
| 11220 | intel_dmi_quirks[i].hook(dev); |
| 11221 | } |
| 11222 | } |
| 11223 | |
| 11224 | /* Disable the VGA plane that we never use */ |
| 11225 | static void i915_disable_vga(struct drm_device *dev) |
| 11226 | { |
| 11227 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 11228 | u8 sr1; |
| 11229 | u32 vga_reg = i915_vgacntrl_reg(dev); |
| 11230 | |
| 11231 | /* WaEnableVGAAccessThroughIOPort:ctg,elk,ilk,snb,ivb,vlv,hsw */ |
| 11232 | vga_get_uninterruptible(dev->pdev, VGA_RSRC_LEGACY_IO); |
| 11233 | outb(SR01, VGA_SR_INDEX); |
| 11234 | sr1 = inb(VGA_SR_DATA); |
| 11235 | outb(sr1 | 1<<5, VGA_SR_DATA); |
| 11236 | vga_put(dev->pdev, VGA_RSRC_LEGACY_IO); |
| 11237 | udelay(300); |
| 11238 | |
| 11239 | I915_WRITE(vga_reg, VGA_DISP_DISABLE); |
| 11240 | POSTING_READ(vga_reg); |
| 11241 | } |
| 11242 | |
| 11243 | void intel_modeset_init_hw(struct drm_device *dev) |
| 11244 | { |
| 11245 | intel_prepare_ddi(dev); |
| 11246 | |
| 11247 | intel_init_clock_gating(dev); |
| 11248 | |
| 11249 | intel_reset_dpio(dev); |
| 11250 | |
| 11251 | mutex_lock(&dev->struct_mutex); |
| 11252 | intel_enable_gt_powersave(dev); |
| 11253 | mutex_unlock(&dev->struct_mutex); |
| 11254 | } |
| 11255 | |
| 11256 | void intel_modeset_suspend_hw(struct drm_device *dev) |
| 11257 | { |
| 11258 | intel_suspend_hw(dev); |
| 11259 | } |
| 11260 | |
| 11261 | void intel_modeset_init(struct drm_device *dev) |
| 11262 | { |
| 11263 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 11264 | int sprite, ret; |
| 11265 | enum pipe pipe; |
| 11266 | struct intel_crtc *crtc; |
| 11267 | |
| 11268 | drm_mode_config_init(dev); |
| 11269 | |
| 11270 | dev->mode_config.min_width = 0; |
| 11271 | dev->mode_config.min_height = 0; |
| 11272 | |
| 11273 | dev->mode_config.preferred_depth = 24; |
| 11274 | dev->mode_config.prefer_shadow = 1; |
| 11275 | |
| 11276 | dev->mode_config.funcs = &intel_mode_funcs; |
| 11277 | |
| 11278 | intel_init_quirks(dev); |
| 11279 | |
| 11280 | intel_init_pm(dev); |
| 11281 | |
| 11282 | if (INTEL_INFO(dev)->num_pipes == 0) |
| 11283 | return; |
| 11284 | |
| 11285 | intel_init_display(dev); |
| 11286 | |
| 11287 | if (IS_GEN2(dev)) { |
| 11288 | dev->mode_config.max_width = 2048; |
| 11289 | dev->mode_config.max_height = 2048; |
| 11290 | } else if (IS_GEN3(dev)) { |
| 11291 | dev->mode_config.max_width = 4096; |
| 11292 | dev->mode_config.max_height = 4096; |
| 11293 | } else { |
| 11294 | dev->mode_config.max_width = 8192; |
| 11295 | dev->mode_config.max_height = 8192; |
| 11296 | } |
| 11297 | dev->mode_config.fb_base = dev_priv->gtt.mappable_base; |
| 11298 | |
| 11299 | DRM_DEBUG_KMS("%d display pipe%s available.\n", |
| 11300 | INTEL_INFO(dev)->num_pipes, |
| 11301 | INTEL_INFO(dev)->num_pipes > 1 ? "s" : ""); |
| 11302 | |
| 11303 | for_each_pipe(pipe) { |
| 11304 | intel_crtc_init(dev, pipe); |
| 11305 | for_each_sprite(pipe, sprite) { |
| 11306 | ret = intel_plane_init(dev, pipe, sprite); |
| 11307 | if (ret) |
| 11308 | DRM_DEBUG_KMS("pipe %c sprite %c init failed: %d\n", |
| 11309 | pipe_name(pipe), sprite_name(pipe, sprite), ret); |
| 11310 | } |
| 11311 | } |
| 11312 | |
| 11313 | intel_init_dpio(dev); |
| 11314 | intel_reset_dpio(dev); |
| 11315 | |
| 11316 | intel_cpu_pll_init(dev); |
| 11317 | intel_shared_dpll_init(dev); |
| 11318 | |
| 11319 | /* Just disable it once at startup */ |
| 11320 | i915_disable_vga(dev); |
| 11321 | intel_setup_outputs(dev); |
| 11322 | |
| 11323 | /* Just in case the BIOS is doing something questionable. */ |
| 11324 | intel_disable_fbc(dev); |
| 11325 | |
| 11326 | mutex_lock(&dev->mode_config.mutex); |
| 11327 | intel_modeset_setup_hw_state(dev, false); |
| 11328 | mutex_unlock(&dev->mode_config.mutex); |
| 11329 | |
| 11330 | list_for_each_entry(crtc, &dev->mode_config.crtc_list, |
| 11331 | base.head) { |
| 11332 | if (!crtc->active) |
| 11333 | continue; |
| 11334 | |
| 11335 | /* |
| 11336 | * Note that reserving the BIOS fb up front prevents us |
| 11337 | * from stuffing other stolen allocations like the ring |
| 11338 | * on top. This prevents some ugliness at boot time, and |
| 11339 | * can even allow for smooth boot transitions if the BIOS |
| 11340 | * fb is large enough for the active pipe configuration. |
| 11341 | */ |
| 11342 | if (dev_priv->display.get_plane_config) { |
| 11343 | dev_priv->display.get_plane_config(crtc, |
| 11344 | &crtc->plane_config); |
| 11345 | /* |
| 11346 | * If the fb is shared between multiple heads, we'll |
| 11347 | * just get the first one. |
| 11348 | */ |
| 11349 | intel_find_plane_obj(crtc, &crtc->plane_config); |
| 11350 | } |
| 11351 | } |
| 11352 | } |
| 11353 | |
| 11354 | static void |
| 11355 | intel_connector_break_all_links(struct intel_connector *connector) |
| 11356 | { |
| 11357 | connector->base.dpms = DRM_MODE_DPMS_OFF; |
| 11358 | connector->base.encoder = NULL; |
| 11359 | connector->encoder->connectors_active = false; |
| 11360 | connector->encoder->base.crtc = NULL; |
| 11361 | } |
| 11362 | |
| 11363 | static void intel_enable_pipe_a(struct drm_device *dev) |
| 11364 | { |
| 11365 | struct intel_connector *connector; |
| 11366 | struct drm_connector *crt = NULL; |
| 11367 | struct intel_load_detect_pipe load_detect_temp; |
| 11368 | |
| 11369 | /* We can't just switch on the pipe A, we need to set things up with a |
| 11370 | * proper mode and output configuration. As a gross hack, enable pipe A |
| 11371 | * by enabling the load detect pipe once. */ |
| 11372 | list_for_each_entry(connector, |
| 11373 | &dev->mode_config.connector_list, |
| 11374 | base.head) { |
| 11375 | if (connector->encoder->type == INTEL_OUTPUT_ANALOG) { |
| 11376 | crt = &connector->base; |
| 11377 | break; |
| 11378 | } |
| 11379 | } |
| 11380 | |
| 11381 | if (!crt) |
| 11382 | return; |
| 11383 | |
| 11384 | if (intel_get_load_detect_pipe(crt, NULL, &load_detect_temp)) |
| 11385 | intel_release_load_detect_pipe(crt, &load_detect_temp); |
| 11386 | |
| 11387 | |
| 11388 | } |
| 11389 | |
| 11390 | static bool |
| 11391 | intel_check_plane_mapping(struct intel_crtc *crtc) |
| 11392 | { |
| 11393 | struct drm_device *dev = crtc->base.dev; |
| 11394 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 11395 | u32 reg, val; |
| 11396 | |
| 11397 | if (INTEL_INFO(dev)->num_pipes == 1) |
| 11398 | return true; |
| 11399 | |
| 11400 | reg = DSPCNTR(!crtc->plane); |
| 11401 | val = I915_READ(reg); |
| 11402 | |
| 11403 | if ((val & DISPLAY_PLANE_ENABLE) && |
| 11404 | (!!(val & DISPPLANE_SEL_PIPE_MASK) == crtc->pipe)) |
| 11405 | return false; |
| 11406 | |
| 11407 | return true; |
| 11408 | } |
| 11409 | |
| 11410 | static void intel_sanitize_crtc(struct intel_crtc *crtc) |
| 11411 | { |
| 11412 | struct drm_device *dev = crtc->base.dev; |
| 11413 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 11414 | u32 reg; |
| 11415 | |
| 11416 | /* Clear any frame start delays used for debugging left by the BIOS */ |
| 11417 | reg = PIPECONF(crtc->config.cpu_transcoder); |
| 11418 | I915_WRITE(reg, I915_READ(reg) & ~PIPECONF_FRAME_START_DELAY_MASK); |
| 11419 | |
| 11420 | /* We need to sanitize the plane -> pipe mapping first because this will |
| 11421 | * disable the crtc (and hence change the state) if it is wrong. Note |
| 11422 | * that gen4+ has a fixed plane -> pipe mapping. */ |
| 11423 | if (INTEL_INFO(dev)->gen < 4 && !intel_check_plane_mapping(crtc)) { |
| 11424 | struct intel_connector *connector; |
| 11425 | bool plane; |
| 11426 | |
| 11427 | DRM_DEBUG_KMS("[CRTC:%d] wrong plane connection detected!\n", |
| 11428 | crtc->base.base.id); |
| 11429 | |
| 11430 | /* Pipe has the wrong plane attached and the plane is active. |
| 11431 | * Temporarily change the plane mapping and disable everything |
| 11432 | * ... */ |
| 11433 | plane = crtc->plane; |
| 11434 | crtc->plane = !plane; |
| 11435 | dev_priv->display.crtc_disable(&crtc->base); |
| 11436 | crtc->plane = plane; |
| 11437 | |
| 11438 | /* ... and break all links. */ |
| 11439 | list_for_each_entry(connector, &dev->mode_config.connector_list, |
| 11440 | base.head) { |
| 11441 | if (connector->encoder->base.crtc != &crtc->base) |
| 11442 | continue; |
| 11443 | |
| 11444 | intel_connector_break_all_links(connector); |
| 11445 | } |
| 11446 | |
| 11447 | WARN_ON(crtc->active); |
| 11448 | crtc->base.enabled = false; |
| 11449 | } |
| 11450 | |
| 11451 | if (dev_priv->quirks & QUIRK_PIPEA_FORCE && |
| 11452 | crtc->pipe == PIPE_A && !crtc->active) { |
| 11453 | /* BIOS forgot to enable pipe A, this mostly happens after |
| 11454 | * resume. Force-enable the pipe to fix this, the update_dpms |
| 11455 | * call below we restore the pipe to the right state, but leave |
| 11456 | * the required bits on. */ |
| 11457 | intel_enable_pipe_a(dev); |
| 11458 | } |
| 11459 | |
| 11460 | /* Adjust the state of the output pipe according to whether we |
| 11461 | * have active connectors/encoders. */ |
| 11462 | intel_crtc_update_dpms(&crtc->base); |
| 11463 | |
| 11464 | if (crtc->active != crtc->base.enabled) { |
| 11465 | struct intel_encoder *encoder; |
| 11466 | |
| 11467 | /* This can happen either due to bugs in the get_hw_state |
| 11468 | * functions or because the pipe is force-enabled due to the |
| 11469 | * pipe A quirk. */ |
| 11470 | DRM_DEBUG_KMS("[CRTC:%d] hw state adjusted, was %s, now %s\n", |
| 11471 | crtc->base.base.id, |
| 11472 | crtc->base.enabled ? "enabled" : "disabled", |
| 11473 | crtc->active ? "enabled" : "disabled"); |
| 11474 | |
| 11475 | crtc->base.enabled = crtc->active; |
| 11476 | |
| 11477 | /* Because we only establish the connector -> encoder -> |
| 11478 | * crtc links if something is active, this means the |
| 11479 | * crtc is now deactivated. Break the links. connector |
| 11480 | * -> encoder links are only establish when things are |
| 11481 | * actually up, hence no need to break them. */ |
| 11482 | WARN_ON(crtc->active); |
| 11483 | |
| 11484 | for_each_encoder_on_crtc(dev, &crtc->base, encoder) { |
| 11485 | WARN_ON(encoder->connectors_active); |
| 11486 | encoder->base.crtc = NULL; |
| 11487 | } |
| 11488 | } |
| 11489 | } |
| 11490 | |
| 11491 | static void intel_sanitize_encoder(struct intel_encoder *encoder) |
| 11492 | { |
| 11493 | struct intel_connector *connector; |
| 11494 | struct drm_device *dev = encoder->base.dev; |
| 11495 | |
| 11496 | /* We need to check both for a crtc link (meaning that the |
| 11497 | * encoder is active and trying to read from a pipe) and the |
| 11498 | * pipe itself being active. */ |
| 11499 | bool has_active_crtc = encoder->base.crtc && |
| 11500 | to_intel_crtc(encoder->base.crtc)->active; |
| 11501 | |
| 11502 | if (encoder->connectors_active && !has_active_crtc) { |
| 11503 | DRM_DEBUG_KMS("[ENCODER:%d:%s] has active connectors but no active pipe!\n", |
| 11504 | encoder->base.base.id, |
| 11505 | drm_get_encoder_name(&encoder->base)); |
| 11506 | |
| 11507 | /* Connector is active, but has no active pipe. This is |
| 11508 | * fallout from our resume register restoring. Disable |
| 11509 | * the encoder manually again. */ |
| 11510 | if (encoder->base.crtc) { |
| 11511 | DRM_DEBUG_KMS("[ENCODER:%d:%s] manually disabled\n", |
| 11512 | encoder->base.base.id, |
| 11513 | drm_get_encoder_name(&encoder->base)); |
| 11514 | encoder->disable(encoder); |
| 11515 | } |
| 11516 | |
| 11517 | /* Inconsistent output/port/pipe state happens presumably due to |
| 11518 | * a bug in one of the get_hw_state functions. Or someplace else |
| 11519 | * in our code, like the register restore mess on resume. Clamp |
| 11520 | * things to off as a safer default. */ |
| 11521 | list_for_each_entry(connector, |
| 11522 | &dev->mode_config.connector_list, |
| 11523 | base.head) { |
| 11524 | if (connector->encoder != encoder) |
| 11525 | continue; |
| 11526 | |
| 11527 | intel_connector_break_all_links(connector); |
| 11528 | } |
| 11529 | } |
| 11530 | /* Enabled encoders without active connectors will be fixed in |
| 11531 | * the crtc fixup. */ |
| 11532 | } |
| 11533 | |
| 11534 | void i915_redisable_vga_power_on(struct drm_device *dev) |
| 11535 | { |
| 11536 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 11537 | u32 vga_reg = i915_vgacntrl_reg(dev); |
| 11538 | |
| 11539 | if (!(I915_READ(vga_reg) & VGA_DISP_DISABLE)) { |
| 11540 | DRM_DEBUG_KMS("Something enabled VGA plane, disabling it\n"); |
| 11541 | i915_disable_vga(dev); |
| 11542 | } |
| 11543 | } |
| 11544 | |
| 11545 | void i915_redisable_vga(struct drm_device *dev) |
| 11546 | { |
| 11547 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 11548 | |
| 11549 | /* This function can be called both from intel_modeset_setup_hw_state or |
| 11550 | * at a very early point in our resume sequence, where the power well |
| 11551 | * structures are not yet restored. Since this function is at a very |
| 11552 | * paranoid "someone might have enabled VGA while we were not looking" |
| 11553 | * level, just check if the power well is enabled instead of trying to |
| 11554 | * follow the "don't touch the power well if we don't need it" policy |
| 11555 | * the rest of the driver uses. */ |
| 11556 | if (!intel_display_power_enabled(dev_priv, POWER_DOMAIN_VGA)) |
| 11557 | return; |
| 11558 | |
| 11559 | i915_redisable_vga_power_on(dev); |
| 11560 | } |
| 11561 | |
| 11562 | static void intel_modeset_readout_hw_state(struct drm_device *dev) |
| 11563 | { |
| 11564 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 11565 | enum pipe pipe; |
| 11566 | struct intel_crtc *crtc; |
| 11567 | struct intel_encoder *encoder; |
| 11568 | struct intel_connector *connector; |
| 11569 | int i; |
| 11570 | |
| 11571 | list_for_each_entry(crtc, &dev->mode_config.crtc_list, |
| 11572 | base.head) { |
| 11573 | memset(&crtc->config, 0, sizeof(crtc->config)); |
| 11574 | |
| 11575 | crtc->active = dev_priv->display.get_pipe_config(crtc, |
| 11576 | &crtc->config); |
| 11577 | |
| 11578 | crtc->base.enabled = crtc->active; |
| 11579 | crtc->primary_enabled = crtc->active; |
| 11580 | |
| 11581 | DRM_DEBUG_KMS("[CRTC:%d] hw state readout: %s\n", |
| 11582 | crtc->base.base.id, |
| 11583 | crtc->active ? "enabled" : "disabled"); |
| 11584 | } |
| 11585 | |
| 11586 | /* FIXME: Smash this into the new shared dpll infrastructure. */ |
| 11587 | if (HAS_DDI(dev)) |
| 11588 | intel_ddi_setup_hw_pll_state(dev); |
| 11589 | |
| 11590 | for (i = 0; i < dev_priv->num_shared_dpll; i++) { |
| 11591 | struct intel_shared_dpll *pll = &dev_priv->shared_dplls[i]; |
| 11592 | |
| 11593 | pll->on = pll->get_hw_state(dev_priv, pll, &pll->hw_state); |
| 11594 | pll->active = 0; |
| 11595 | list_for_each_entry(crtc, &dev->mode_config.crtc_list, |
| 11596 | base.head) { |
| 11597 | if (crtc->active && intel_crtc_to_shared_dpll(crtc) == pll) |
| 11598 | pll->active++; |
| 11599 | } |
| 11600 | pll->refcount = pll->active; |
| 11601 | |
| 11602 | DRM_DEBUG_KMS("%s hw state readout: refcount %i, on %i\n", |
| 11603 | pll->name, pll->refcount, pll->on); |
| 11604 | } |
| 11605 | |
| 11606 | list_for_each_entry(encoder, &dev->mode_config.encoder_list, |
| 11607 | base.head) { |
| 11608 | pipe = 0; |
| 11609 | |
| 11610 | if (encoder->get_hw_state(encoder, &pipe)) { |
| 11611 | crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]); |
| 11612 | encoder->base.crtc = &crtc->base; |
| 11613 | encoder->get_config(encoder, &crtc->config); |
| 11614 | } else { |
| 11615 | encoder->base.crtc = NULL; |
| 11616 | } |
| 11617 | |
| 11618 | encoder->connectors_active = false; |
| 11619 | DRM_DEBUG_KMS("[ENCODER:%d:%s] hw state readout: %s, pipe %c\n", |
| 11620 | encoder->base.base.id, |
| 11621 | drm_get_encoder_name(&encoder->base), |
| 11622 | encoder->base.crtc ? "enabled" : "disabled", |
| 11623 | pipe_name(pipe)); |
| 11624 | } |
| 11625 | |
| 11626 | list_for_each_entry(connector, &dev->mode_config.connector_list, |
| 11627 | base.head) { |
| 11628 | if (connector->get_hw_state(connector)) { |
| 11629 | connector->base.dpms = DRM_MODE_DPMS_ON; |
| 11630 | connector->encoder->connectors_active = true; |
| 11631 | connector->base.encoder = &connector->encoder->base; |
| 11632 | } else { |
| 11633 | connector->base.dpms = DRM_MODE_DPMS_OFF; |
| 11634 | connector->base.encoder = NULL; |
| 11635 | } |
| 11636 | DRM_DEBUG_KMS("[CONNECTOR:%d:%s] hw state readout: %s\n", |
| 11637 | connector->base.base.id, |
| 11638 | drm_get_connector_name(&connector->base), |
| 11639 | connector->base.encoder ? "enabled" : "disabled"); |
| 11640 | } |
| 11641 | } |
| 11642 | |
| 11643 | /* Scan out the current hw modeset state, sanitizes it and maps it into the drm |
| 11644 | * and i915 state tracking structures. */ |
| 11645 | void intel_modeset_setup_hw_state(struct drm_device *dev, |
| 11646 | bool force_restore) |
| 11647 | { |
| 11648 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 11649 | enum pipe pipe; |
| 11650 | struct intel_crtc *crtc; |
| 11651 | struct intel_encoder *encoder; |
| 11652 | int i; |
| 11653 | |
| 11654 | intel_modeset_readout_hw_state(dev); |
| 11655 | |
| 11656 | /* |
| 11657 | * Now that we have the config, copy it to each CRTC struct |
| 11658 | * Note that this could go away if we move to using crtc_config |
| 11659 | * checking everywhere. |
| 11660 | */ |
| 11661 | list_for_each_entry(crtc, &dev->mode_config.crtc_list, |
| 11662 | base.head) { |
| 11663 | if (crtc->active && i915.fastboot) { |
| 11664 | intel_mode_from_pipe_config(&crtc->base.mode, &crtc->config); |
| 11665 | DRM_DEBUG_KMS("[CRTC:%d] found active mode: ", |
| 11666 | crtc->base.base.id); |
| 11667 | drm_mode_debug_printmodeline(&crtc->base.mode); |
| 11668 | } |
| 11669 | } |
| 11670 | |
| 11671 | /* HW state is read out, now we need to sanitize this mess. */ |
| 11672 | list_for_each_entry(encoder, &dev->mode_config.encoder_list, |
| 11673 | base.head) { |
| 11674 | intel_sanitize_encoder(encoder); |
| 11675 | } |
| 11676 | |
| 11677 | for_each_pipe(pipe) { |
| 11678 | crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]); |
| 11679 | intel_sanitize_crtc(crtc); |
| 11680 | intel_dump_pipe_config(crtc, &crtc->config, "[setup_hw_state]"); |
| 11681 | } |
| 11682 | |
| 11683 | for (i = 0; i < dev_priv->num_shared_dpll; i++) { |
| 11684 | struct intel_shared_dpll *pll = &dev_priv->shared_dplls[i]; |
| 11685 | |
| 11686 | if (!pll->on || pll->active) |
| 11687 | continue; |
| 11688 | |
| 11689 | DRM_DEBUG_KMS("%s enabled but not in use, disabling\n", pll->name); |
| 11690 | |
| 11691 | pll->disable(dev_priv, pll); |
| 11692 | pll->on = false; |
| 11693 | } |
| 11694 | |
| 11695 | if (HAS_PCH_SPLIT(dev)) |
| 11696 | ilk_wm_get_hw_state(dev); |
| 11697 | |
| 11698 | if (force_restore) { |
| 11699 | i915_redisable_vga(dev); |
| 11700 | |
| 11701 | /* |
| 11702 | * We need to use raw interfaces for restoring state to avoid |
| 11703 | * checking (bogus) intermediate states. |
| 11704 | */ |
| 11705 | for_each_pipe(pipe) { |
| 11706 | struct drm_crtc *crtc = |
| 11707 | dev_priv->pipe_to_crtc_mapping[pipe]; |
| 11708 | |
| 11709 | __intel_set_mode(crtc, &crtc->mode, crtc->x, crtc->y, |
| 11710 | crtc->fb); |
| 11711 | } |
| 11712 | } else { |
| 11713 | intel_modeset_update_staged_output_state(dev); |
| 11714 | } |
| 11715 | |
| 11716 | intel_modeset_check_state(dev); |
| 11717 | } |
| 11718 | |
| 11719 | void intel_modeset_gem_init(struct drm_device *dev) |
| 11720 | { |
| 11721 | struct drm_crtc *c; |
| 11722 | struct intel_framebuffer *fb; |
| 11723 | |
| 11724 | intel_modeset_init_hw(dev); |
| 11725 | |
| 11726 | intel_setup_overlay(dev); |
| 11727 | |
| 11728 | /* |
| 11729 | * Make sure any fbs we allocated at startup are properly |
| 11730 | * pinned & fenced. When we do the allocation it's too early |
| 11731 | * for this. |
| 11732 | */ |
| 11733 | mutex_lock(&dev->struct_mutex); |
| 11734 | list_for_each_entry(c, &dev->mode_config.crtc_list, head) { |
| 11735 | if (!c->fb) |
| 11736 | continue; |
| 11737 | |
| 11738 | fb = to_intel_framebuffer(c->fb); |
| 11739 | if (intel_pin_and_fence_fb_obj(dev, fb->obj, NULL)) { |
| 11740 | DRM_ERROR("failed to pin boot fb on pipe %d\n", |
| 11741 | to_intel_crtc(c)->pipe); |
| 11742 | drm_framebuffer_unreference(c->fb); |
| 11743 | c->fb = NULL; |
| 11744 | } |
| 11745 | } |
| 11746 | mutex_unlock(&dev->struct_mutex); |
| 11747 | } |
| 11748 | |
| 11749 | void intel_connector_unregister(struct intel_connector *intel_connector) |
| 11750 | { |
| 11751 | struct drm_connector *connector = &intel_connector->base; |
| 11752 | |
| 11753 | intel_panel_destroy_backlight(connector); |
| 11754 | drm_sysfs_connector_remove(connector); |
| 11755 | } |
| 11756 | |
| 11757 | void intel_modeset_cleanup(struct drm_device *dev) |
| 11758 | { |
| 11759 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 11760 | struct drm_crtc *crtc; |
| 11761 | struct drm_connector *connector; |
| 11762 | |
| 11763 | /* |
| 11764 | * Interrupts and polling as the first thing to avoid creating havoc. |
| 11765 | * Too much stuff here (turning of rps, connectors, ...) would |
| 11766 | * experience fancy races otherwise. |
| 11767 | */ |
| 11768 | drm_irq_uninstall(dev); |
| 11769 | cancel_work_sync(&dev_priv->hotplug_work); |
| 11770 | /* |
| 11771 | * Due to the hpd irq storm handling the hotplug work can re-arm the |
| 11772 | * poll handlers. Hence disable polling after hpd handling is shut down. |
| 11773 | */ |
| 11774 | drm_kms_helper_poll_fini(dev); |
| 11775 | |
| 11776 | mutex_lock(&dev->struct_mutex); |
| 11777 | |
| 11778 | intel_unregister_dsm_handler(); |
| 11779 | |
| 11780 | list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { |
| 11781 | /* Skip inactive CRTCs */ |
| 11782 | if (!crtc->fb) |
| 11783 | continue; |
| 11784 | |
| 11785 | intel_increase_pllclock(crtc); |
| 11786 | } |
| 11787 | |
| 11788 | intel_disable_fbc(dev); |
| 11789 | |
| 11790 | intel_disable_gt_powersave(dev); |
| 11791 | |
| 11792 | ironlake_teardown_rc6(dev); |
| 11793 | |
| 11794 | mutex_unlock(&dev->struct_mutex); |
| 11795 | |
| 11796 | /* flush any delayed tasks or pending work */ |
| 11797 | flush_scheduled_work(); |
| 11798 | |
| 11799 | /* destroy the backlight and sysfs files before encoders/connectors */ |
| 11800 | list_for_each_entry(connector, &dev->mode_config.connector_list, head) { |
| 11801 | struct intel_connector *intel_connector; |
| 11802 | |
| 11803 | intel_connector = to_intel_connector(connector); |
| 11804 | intel_connector->unregister(intel_connector); |
| 11805 | } |
| 11806 | |
| 11807 | drm_mode_config_cleanup(dev); |
| 11808 | |
| 11809 | intel_cleanup_overlay(dev); |
| 11810 | } |
| 11811 | |
| 11812 | /* |
| 11813 | * Return which encoder is currently attached for connector. |
| 11814 | */ |
| 11815 | struct drm_encoder *intel_best_encoder(struct drm_connector *connector) |
| 11816 | { |
| 11817 | return &intel_attached_encoder(connector)->base; |
| 11818 | } |
| 11819 | |
| 11820 | void intel_connector_attach_encoder(struct intel_connector *connector, |
| 11821 | struct intel_encoder *encoder) |
| 11822 | { |
| 11823 | connector->encoder = encoder; |
| 11824 | drm_mode_connector_attach_encoder(&connector->base, |
| 11825 | &encoder->base); |
| 11826 | } |
| 11827 | |
| 11828 | /* |
| 11829 | * set vga decode state - true == enable VGA decode |
| 11830 | */ |
| 11831 | int intel_modeset_vga_set_state(struct drm_device *dev, bool state) |
| 11832 | { |
| 11833 | struct drm_i915_private *dev_priv = dev->dev_private; |
| 11834 | unsigned reg = INTEL_INFO(dev)->gen >= 6 ? SNB_GMCH_CTRL : INTEL_GMCH_CTRL; |
| 11835 | u16 gmch_ctrl; |
| 11836 | |
| 11837 | if (pci_read_config_word(dev_priv->bridge_dev, reg, &gmch_ctrl)) { |
| 11838 | DRM_ERROR("failed to read control word\n"); |
| 11839 | return -EIO; |
| 11840 | } |
| 11841 | |
| 11842 | if (!!(gmch_ctrl & INTEL_GMCH_VGA_DISABLE) == !state) |
| 11843 | return 0; |
| 11844 | |
| 11845 | if (state) |
| 11846 | gmch_ctrl &= ~INTEL_GMCH_VGA_DISABLE; |
| 11847 | else |
| 11848 | gmch_ctrl |= INTEL_GMCH_VGA_DISABLE; |
| 11849 | |
| 11850 | if (pci_write_config_word(dev_priv->bridge_dev, reg, gmch_ctrl)) { |
| 11851 | DRM_ERROR("failed to write control word\n"); |
| 11852 | return -EIO; |
| 11853 | } |
| 11854 | |
| 11855 | return 0; |
| 11856 | } |
| 11857 | |
| 11858 | struct intel_display_error_state { |
| 11859 | |
| 11860 | u32 power_well_driver; |
| 11861 | |
| 11862 | int num_transcoders; |
| 11863 | |
| 11864 | struct intel_cursor_error_state { |
| 11865 | u32 control; |
| 11866 | u32 position; |
| 11867 | u32 base; |
| 11868 | u32 size; |
| 11869 | } cursor[I915_MAX_PIPES]; |
| 11870 | |
| 11871 | struct intel_pipe_error_state { |
| 11872 | bool power_domain_on; |
| 11873 | u32 source; |
| 11874 | } pipe[I915_MAX_PIPES]; |
| 11875 | |
| 11876 | struct intel_plane_error_state { |
| 11877 | u32 control; |
| 11878 | u32 stride; |
| 11879 | u32 size; |
| 11880 | u32 pos; |
| 11881 | u32 addr; |
| 11882 | u32 surface; |
| 11883 | u32 tile_offset; |
| 11884 | } plane[I915_MAX_PIPES]; |
| 11885 | |
| 11886 | struct intel_transcoder_error_state { |
| 11887 | bool power_domain_on; |
| 11888 | enum transcoder cpu_transcoder; |
| 11889 | |
| 11890 | u32 conf; |
| 11891 | |
| 11892 | u32 htotal; |
| 11893 | u32 hblank; |
| 11894 | u32 hsync; |
| 11895 | u32 vtotal; |
| 11896 | u32 vblank; |
| 11897 | u32 vsync; |
| 11898 | } transcoder[4]; |
| 11899 | }; |
| 11900 | |
| 11901 | struct intel_display_error_state * |
| 11902 | intel_display_capture_error_state(struct drm_device *dev) |
| 11903 | { |
| 11904 | drm_i915_private_t *dev_priv = dev->dev_private; |
| 11905 | struct intel_display_error_state *error; |
| 11906 | int transcoders[] = { |
| 11907 | TRANSCODER_A, |
| 11908 | TRANSCODER_B, |
| 11909 | TRANSCODER_C, |
| 11910 | TRANSCODER_EDP, |
| 11911 | }; |
| 11912 | int i; |
| 11913 | |
| 11914 | if (INTEL_INFO(dev)->num_pipes == 0) |
| 11915 | return NULL; |
| 11916 | |
| 11917 | error = kzalloc(sizeof(*error), GFP_ATOMIC); |
| 11918 | if (error == NULL) |
| 11919 | return NULL; |
| 11920 | |
| 11921 | if (IS_HASWELL(dev) || IS_BROADWELL(dev)) |
| 11922 | error->power_well_driver = I915_READ(HSW_PWR_WELL_DRIVER); |
| 11923 | |
| 11924 | for_each_pipe(i) { |
| 11925 | error->pipe[i].power_domain_on = |
| 11926 | intel_display_power_enabled_sw(dev_priv, |
| 11927 | POWER_DOMAIN_PIPE(i)); |
| 11928 | if (!error->pipe[i].power_domain_on) |
| 11929 | continue; |
| 11930 | |
| 11931 | if (INTEL_INFO(dev)->gen <= 6 || IS_VALLEYVIEW(dev)) { |
| 11932 | error->cursor[i].control = I915_READ(CURCNTR(i)); |
| 11933 | error->cursor[i].position = I915_READ(CURPOS(i)); |
| 11934 | error->cursor[i].base = I915_READ(CURBASE(i)); |
| 11935 | } else { |
| 11936 | error->cursor[i].control = I915_READ(CURCNTR_IVB(i)); |
| 11937 | error->cursor[i].position = I915_READ(CURPOS_IVB(i)); |
| 11938 | error->cursor[i].base = I915_READ(CURBASE_IVB(i)); |
| 11939 | } |
| 11940 | |
| 11941 | error->plane[i].control = I915_READ(DSPCNTR(i)); |
| 11942 | error->plane[i].stride = I915_READ(DSPSTRIDE(i)); |
| 11943 | if (INTEL_INFO(dev)->gen <= 3) { |
| 11944 | error->plane[i].size = I915_READ(DSPSIZE(i)); |
| 11945 | error->plane[i].pos = I915_READ(DSPPOS(i)); |
| 11946 | } |
| 11947 | if (INTEL_INFO(dev)->gen <= 7 && !IS_HASWELL(dev)) |
| 11948 | error->plane[i].addr = I915_READ(DSPADDR(i)); |
| 11949 | if (INTEL_INFO(dev)->gen >= 4) { |
| 11950 | error->plane[i].surface = I915_READ(DSPSURF(i)); |
| 11951 | error->plane[i].tile_offset = I915_READ(DSPTILEOFF(i)); |
| 11952 | } |
| 11953 | |
| 11954 | error->pipe[i].source = I915_READ(PIPESRC(i)); |
| 11955 | } |
| 11956 | |
| 11957 | error->num_transcoders = INTEL_INFO(dev)->num_pipes; |
| 11958 | if (HAS_DDI(dev_priv->dev)) |
| 11959 | error->num_transcoders++; /* Account for eDP. */ |
| 11960 | |
| 11961 | for (i = 0; i < error->num_transcoders; i++) { |
| 11962 | enum transcoder cpu_transcoder = transcoders[i]; |
| 11963 | |
| 11964 | error->transcoder[i].power_domain_on = |
| 11965 | intel_display_power_enabled_sw(dev_priv, |
| 11966 | POWER_DOMAIN_TRANSCODER(cpu_transcoder)); |
| 11967 | if (!error->transcoder[i].power_domain_on) |
| 11968 | continue; |
| 11969 | |
| 11970 | error->transcoder[i].cpu_transcoder = cpu_transcoder; |
| 11971 | |
| 11972 | error->transcoder[i].conf = I915_READ(PIPECONF(cpu_transcoder)); |
| 11973 | error->transcoder[i].htotal = I915_READ(HTOTAL(cpu_transcoder)); |
| 11974 | error->transcoder[i].hblank = I915_READ(HBLANK(cpu_transcoder)); |
| 11975 | error->transcoder[i].hsync = I915_READ(HSYNC(cpu_transcoder)); |
| 11976 | error->transcoder[i].vtotal = I915_READ(VTOTAL(cpu_transcoder)); |
| 11977 | error->transcoder[i].vblank = I915_READ(VBLANK(cpu_transcoder)); |
| 11978 | error->transcoder[i].vsync = I915_READ(VSYNC(cpu_transcoder)); |
| 11979 | } |
| 11980 | |
| 11981 | return error; |
| 11982 | } |
| 11983 | |
| 11984 | #define err_printf(e, ...) i915_error_printf(e, __VA_ARGS__) |
| 11985 | |
| 11986 | void |
| 11987 | intel_display_print_error_state(struct drm_i915_error_state_buf *m, |
| 11988 | struct drm_device *dev, |
| 11989 | struct intel_display_error_state *error) |
| 11990 | { |
| 11991 | int i; |
| 11992 | |
| 11993 | if (!error) |
| 11994 | return; |
| 11995 | |
| 11996 | err_printf(m, "Num Pipes: %d\n", INTEL_INFO(dev)->num_pipes); |
| 11997 | if (IS_HASWELL(dev) || IS_BROADWELL(dev)) |
| 11998 | err_printf(m, "PWR_WELL_CTL2: %08x\n", |
| 11999 | error->power_well_driver); |
| 12000 | for_each_pipe(i) { |
| 12001 | err_printf(m, "Pipe [%d]:\n", i); |
| 12002 | err_printf(m, " Power: %s\n", |
| 12003 | error->pipe[i].power_domain_on ? "on" : "off"); |
| 12004 | err_printf(m, " SRC: %08x\n", error->pipe[i].source); |
| 12005 | |
| 12006 | err_printf(m, "Plane [%d]:\n", i); |
| 12007 | err_printf(m, " CNTR: %08x\n", error->plane[i].control); |
| 12008 | err_printf(m, " STRIDE: %08x\n", error->plane[i].stride); |
| 12009 | if (INTEL_INFO(dev)->gen <= 3) { |
| 12010 | err_printf(m, " SIZE: %08x\n", error->plane[i].size); |
| 12011 | err_printf(m, " POS: %08x\n", error->plane[i].pos); |
| 12012 | } |
| 12013 | if (INTEL_INFO(dev)->gen <= 7 && !IS_HASWELL(dev)) |
| 12014 | err_printf(m, " ADDR: %08x\n", error->plane[i].addr); |
| 12015 | if (INTEL_INFO(dev)->gen >= 4) { |
| 12016 | err_printf(m, " SURF: %08x\n", error->plane[i].surface); |
| 12017 | err_printf(m, " TILEOFF: %08x\n", error->plane[i].tile_offset); |
| 12018 | } |
| 12019 | |
| 12020 | err_printf(m, "Cursor [%d]:\n", i); |
| 12021 | err_printf(m, " CNTR: %08x\n", error->cursor[i].control); |
| 12022 | err_printf(m, " POS: %08x\n", error->cursor[i].position); |
| 12023 | err_printf(m, " BASE: %08x\n", error->cursor[i].base); |
| 12024 | } |
| 12025 | |
| 12026 | for (i = 0; i < error->num_transcoders; i++) { |
| 12027 | err_printf(m, "CPU transcoder: %c\n", |
| 12028 | transcoder_name(error->transcoder[i].cpu_transcoder)); |
| 12029 | err_printf(m, " Power: %s\n", |
| 12030 | error->transcoder[i].power_domain_on ? "on" : "off"); |
| 12031 | err_printf(m, " CONF: %08x\n", error->transcoder[i].conf); |
| 12032 | err_printf(m, " HTOTAL: %08x\n", error->transcoder[i].htotal); |
| 12033 | err_printf(m, " HBLANK: %08x\n", error->transcoder[i].hblank); |
| 12034 | err_printf(m, " HSYNC: %08x\n", error->transcoder[i].hsync); |
| 12035 | err_printf(m, " VTOTAL: %08x\n", error->transcoder[i].vtotal); |
| 12036 | err_printf(m, " VBLANK: %08x\n", error->transcoder[i].vblank); |
| 12037 | err_printf(m, " VSYNC: %08x\n", error->transcoder[i].vsync); |
| 12038 | } |
| 12039 | } |