| 1 | # |
| 2 | # Hardware monitoring chip drivers configuration |
| 3 | # |
| 4 | |
| 5 | menuconfig HWMON |
| 6 | tristate "Hardware Monitoring support" |
| 7 | depends on HAS_IOMEM |
| 8 | default y |
| 9 | help |
| 10 | Hardware monitoring devices let you monitor the hardware health |
| 11 | of a system. Most modern motherboards include such a device. It |
| 12 | can include temperature sensors, voltage sensors, fan speed |
| 13 | sensors and various additional features such as the ability to |
| 14 | control the speed of the fans. If you want this support you |
| 15 | should say Y here and also to the specific driver(s) for your |
| 16 | sensors chip(s) below. |
| 17 | |
| 18 | To find out which specific driver(s) you need, use the |
| 19 | sensors-detect script from the lm_sensors package. Read |
| 20 | <file:Documentation/hwmon/userspace-tools> for details. |
| 21 | |
| 22 | This support can also be built as a module. If so, the module |
| 23 | will be called hwmon. |
| 24 | |
| 25 | if HWMON |
| 26 | |
| 27 | config HWMON_VID |
| 28 | tristate |
| 29 | default n |
| 30 | |
| 31 | config HWMON_DEBUG_CHIP |
| 32 | bool "Hardware Monitoring Chip debugging messages" |
| 33 | default n |
| 34 | help |
| 35 | Say Y here if you want the I2C chip drivers to produce a bunch of |
| 36 | debug messages to the system log. Select this if you are having |
| 37 | a problem with I2C support and want to see more of what is going |
| 38 | on. |
| 39 | |
| 40 | comment "Native drivers" |
| 41 | |
| 42 | config SENSORS_AB8500 |
| 43 | tristate "AB8500 thermal monitoring" |
| 44 | depends on AB8500_GPADC && AB8500_BM |
| 45 | default n |
| 46 | help |
| 47 | If you say yes here you get support for the thermal sensor part |
| 48 | of the AB8500 chip. The driver includes thermal management for |
| 49 | AB8500 die and two GPADC channels. The GPADC channel are preferably |
| 50 | used to access sensors outside the AB8500 chip. |
| 51 | |
| 52 | This driver can also be built as a module. If so, the module |
| 53 | will be called abx500-temp. |
| 54 | |
| 55 | config SENSORS_ABITUGURU |
| 56 | tristate "Abit uGuru (rev 1 & 2)" |
| 57 | depends on X86 && DMI |
| 58 | help |
| 59 | If you say yes here you get support for the sensor part of the first |
| 60 | and second revision of the Abit uGuru chip. The voltage and frequency |
| 61 | control parts of the Abit uGuru are not supported. The Abit uGuru |
| 62 | chip can be found on Abit uGuru featuring motherboards (most modern |
| 63 | Abit motherboards from before end 2005). For more info and a list |
| 64 | of which motherboards have which revision see |
| 65 | Documentation/hwmon/abituguru |
| 66 | |
| 67 | This driver can also be built as a module. If so, the module |
| 68 | will be called abituguru. |
| 69 | |
| 70 | config SENSORS_ABITUGURU3 |
| 71 | tristate "Abit uGuru (rev 3)" |
| 72 | depends on X86 && DMI |
| 73 | help |
| 74 | If you say yes here you get support for the sensor part of the |
| 75 | third revision of the Abit uGuru chip. Only reading the sensors |
| 76 | and their settings is supported. The third revision of the Abit |
| 77 | uGuru chip can be found on recent Abit motherboards (since end |
| 78 | 2005). For more info and a list of which motherboards have which |
| 79 | revision see Documentation/hwmon/abituguru3 |
| 80 | |
| 81 | This driver can also be built as a module. If so, the module |
| 82 | will be called abituguru3. |
| 83 | |
| 84 | config SENSORS_AD7314 |
| 85 | tristate "Analog Devices AD7314 and compatibles" |
| 86 | depends on SPI |
| 87 | help |
| 88 | If you say yes here you get support for the Analog Devices |
| 89 | AD7314, ADT7301 and ADT7302 temperature sensors. |
| 90 | |
| 91 | This driver can also be built as a module. If so, the module |
| 92 | will be called ad7314. |
| 93 | |
| 94 | config SENSORS_AD7414 |
| 95 | tristate "Analog Devices AD7414" |
| 96 | depends on I2C |
| 97 | help |
| 98 | If you say yes here you get support for the Analog Devices |
| 99 | AD7414 temperature monitoring chip. |
| 100 | |
| 101 | This driver can also be built as a module. If so, the module |
| 102 | will be called ad7414. |
| 103 | |
| 104 | config SENSORS_AD7418 |
| 105 | tristate "Analog Devices AD7416, AD7417 and AD7418" |
| 106 | depends on I2C |
| 107 | help |
| 108 | If you say yes here you get support for the Analog Devices |
| 109 | AD7416, AD7417 and AD7418 temperature monitoring chips. |
| 110 | |
| 111 | This driver can also be built as a module. If so, the module |
| 112 | will be called ad7418. |
| 113 | |
| 114 | config SENSORS_ADCXX |
| 115 | tristate "National Semiconductor ADCxxxSxxx" |
| 116 | depends on SPI_MASTER |
| 117 | help |
| 118 | If you say yes here you get support for the National Semiconductor |
| 119 | ADC<bb><c>S<sss> chip family, where |
| 120 | * bb is the resolution in number of bits (8, 10, 12) |
| 121 | * c is the number of channels (1, 2, 4, 8) |
| 122 | * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500 |
| 123 | kSPS and 101 for 1 MSPS) |
| 124 | |
| 125 | Examples : ADC081S101, ADC124S501, ... |
| 126 | |
| 127 | This driver can also be built as a module. If so, the module |
| 128 | will be called adcxx. |
| 129 | |
| 130 | config SENSORS_ADM1021 |
| 131 | tristate "Analog Devices ADM1021 and compatibles" |
| 132 | depends on I2C |
| 133 | help |
| 134 | If you say yes here you get support for Analog Devices ADM1021 |
| 135 | and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A, |
| 136 | Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10. |
| 137 | |
| 138 | This driver can also be built as a module. If so, the module |
| 139 | will be called adm1021. |
| 140 | |
| 141 | config SENSORS_ADM1025 |
| 142 | tristate "Analog Devices ADM1025 and compatibles" |
| 143 | depends on I2C |
| 144 | select HWMON_VID |
| 145 | help |
| 146 | If you say yes here you get support for Analog Devices ADM1025 |
| 147 | and Philips NE1619 sensor chips. |
| 148 | |
| 149 | This driver can also be built as a module. If so, the module |
| 150 | will be called adm1025. |
| 151 | |
| 152 | config SENSORS_ADM1026 |
| 153 | tristate "Analog Devices ADM1026 and compatibles" |
| 154 | depends on I2C |
| 155 | select HWMON_VID |
| 156 | help |
| 157 | If you say yes here you get support for Analog Devices ADM1026 |
| 158 | sensor chip. |
| 159 | |
| 160 | This driver can also be built as a module. If so, the module |
| 161 | will be called adm1026. |
| 162 | |
| 163 | config SENSORS_ADM1029 |
| 164 | tristate "Analog Devices ADM1029" |
| 165 | depends on I2C |
| 166 | help |
| 167 | If you say yes here you get support for Analog Devices ADM1029 |
| 168 | sensor chip. |
| 169 | Very rare chip, please let us know you use it. |
| 170 | |
| 171 | This driver can also be built as a module. If so, the module |
| 172 | will be called adm1029. |
| 173 | |
| 174 | config SENSORS_ADM1031 |
| 175 | tristate "Analog Devices ADM1031 and compatibles" |
| 176 | depends on I2C |
| 177 | help |
| 178 | If you say yes here you get support for Analog Devices ADM1031 |
| 179 | and ADM1030 sensor chips. |
| 180 | |
| 181 | This driver can also be built as a module. If so, the module |
| 182 | will be called adm1031. |
| 183 | |
| 184 | config SENSORS_ADM9240 |
| 185 | tristate "Analog Devices ADM9240 and compatibles" |
| 186 | depends on I2C |
| 187 | select HWMON_VID |
| 188 | help |
| 189 | If you say yes here you get support for Analog Devices ADM9240, |
| 190 | Dallas DS1780, National Semiconductor LM81 sensor chips. |
| 191 | |
| 192 | This driver can also be built as a module. If so, the module |
| 193 | will be called adm9240. |
| 194 | |
| 195 | config SENSORS_ADT7X10 |
| 196 | tristate |
| 197 | help |
| 198 | This module contains common code shared by the ADT7310/ADT7320 and |
| 199 | ADT7410/ADT7420 temperature monitoring chip drivers. |
| 200 | |
| 201 | If build as a module, the module will be called adt7x10. |
| 202 | |
| 203 | config SENSORS_ADT7310 |
| 204 | tristate "Analog Devices ADT7310/ADT7320" |
| 205 | depends on SPI_MASTER |
| 206 | select SENSORS_ADT7X10 |
| 207 | help |
| 208 | If you say yes here you get support for the Analog Devices |
| 209 | ADT7310 and ADT7320 temperature monitoring chips. |
| 210 | |
| 211 | This driver can also be built as a module. If so, the module |
| 212 | will be called adt7310. |
| 213 | |
| 214 | config SENSORS_ADT7410 |
| 215 | tristate "Analog Devices ADT7410/ADT7420" |
| 216 | depends on I2C |
| 217 | select SENSORS_ADT7X10 |
| 218 | help |
| 219 | If you say yes here you get support for the Analog Devices |
| 220 | ADT7410 and ADT7420 temperature monitoring chips. |
| 221 | |
| 222 | This driver can also be built as a module. If so, the module |
| 223 | will be called adt7410. |
| 224 | |
| 225 | config SENSORS_ADT7411 |
| 226 | tristate "Analog Devices ADT7411" |
| 227 | depends on I2C |
| 228 | help |
| 229 | If you say yes here you get support for the Analog Devices |
| 230 | ADT7411 voltage and temperature monitoring chip. |
| 231 | |
| 232 | This driver can also be built as a module. If so, the module |
| 233 | will be called adt7411. |
| 234 | |
| 235 | config SENSORS_ADT7462 |
| 236 | tristate "Analog Devices ADT7462" |
| 237 | depends on I2C |
| 238 | help |
| 239 | If you say yes here you get support for the Analog Devices |
| 240 | ADT7462 temperature monitoring chips. |
| 241 | |
| 242 | This driver can also be built as a module. If so, the module |
| 243 | will be called adt7462. |
| 244 | |
| 245 | config SENSORS_ADT7470 |
| 246 | tristate "Analog Devices ADT7470" |
| 247 | depends on I2C |
| 248 | help |
| 249 | If you say yes here you get support for the Analog Devices |
| 250 | ADT7470 temperature monitoring chips. |
| 251 | |
| 252 | This driver can also be built as a module. If so, the module |
| 253 | will be called adt7470. |
| 254 | |
| 255 | config SENSORS_ADT7475 |
| 256 | tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490" |
| 257 | depends on I2C |
| 258 | select HWMON_VID |
| 259 | help |
| 260 | If you say yes here you get support for the Analog Devices |
| 261 | ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring |
| 262 | chips. |
| 263 | |
| 264 | This driver can also be build as a module. If so, the module |
| 265 | will be called adt7475. |
| 266 | |
| 267 | config SENSORS_ASC7621 |
| 268 | tristate "Andigilog aSC7621" |
| 269 | depends on I2C |
| 270 | help |
| 271 | If you say yes here you get support for the aSC7621 |
| 272 | family of SMBus sensors chip found on most Intel X38, X48, X58, |
| 273 | 945, 965 and 975 desktop boards. Currently supported chips: |
| 274 | aSC7621 |
| 275 | aSC7621a |
| 276 | |
| 277 | This driver can also be built as a module. If so, the module |
| 278 | will be called asc7621. |
| 279 | |
| 280 | config SENSORS_K8TEMP |
| 281 | tristate "AMD Athlon64/FX or Opteron temperature sensor" |
| 282 | depends on X86 && PCI |
| 283 | help |
| 284 | If you say yes here you get support for the temperature |
| 285 | sensor(s) inside your CPU. Supported is whole AMD K8 |
| 286 | microarchitecture. Please note that you will need at least |
| 287 | lm-sensors 2.10.1 for proper userspace support. |
| 288 | |
| 289 | This driver can also be built as a module. If so, the module |
| 290 | will be called k8temp. |
| 291 | |
| 292 | config SENSORS_K10TEMP |
| 293 | tristate "AMD Family 10h+ temperature sensor" |
| 294 | depends on X86 && PCI |
| 295 | help |
| 296 | If you say yes here you get support for the temperature |
| 297 | sensor(s) inside your CPU. Supported are later revisions of |
| 298 | the AMD Family 10h and all revisions of the AMD Family 11h, |
| 299 | 12h (Llano), 14h (Brazos), 15h (Bulldozer/Trinity) and |
| 300 | 16h (Kabini) microarchitectures. |
| 301 | |
| 302 | This driver can also be built as a module. If so, the module |
| 303 | will be called k10temp. |
| 304 | |
| 305 | config SENSORS_FAM15H_POWER |
| 306 | tristate "AMD Family 15h processor power" |
| 307 | depends on X86 && PCI |
| 308 | help |
| 309 | If you say yes here you get support for processor power |
| 310 | information of your AMD family 15h CPU. |
| 311 | |
| 312 | This driver can also be built as a module. If so, the module |
| 313 | will be called fam15h_power. |
| 314 | |
| 315 | config SENSORS_ASB100 |
| 316 | tristate "Asus ASB100 Bach" |
| 317 | depends on X86 && I2C |
| 318 | select HWMON_VID |
| 319 | help |
| 320 | If you say yes here you get support for the ASB100 Bach sensor |
| 321 | chip found on some Asus mainboards. |
| 322 | |
| 323 | This driver can also be built as a module. If so, the module |
| 324 | will be called asb100. |
| 325 | |
| 326 | config SENSORS_ATXP1 |
| 327 | tristate "Attansic ATXP1 VID controller" |
| 328 | depends on I2C |
| 329 | select HWMON_VID |
| 330 | help |
| 331 | If you say yes here you get support for the Attansic ATXP1 VID |
| 332 | controller. |
| 333 | |
| 334 | If your board have such a chip, you are able to control your CPU |
| 335 | core and other voltages. |
| 336 | |
| 337 | This driver can also be built as a module. If so, the module |
| 338 | will be called atxp1. |
| 339 | |
| 340 | config SENSORS_DS620 |
| 341 | tristate "Dallas Semiconductor DS620" |
| 342 | depends on I2C |
| 343 | help |
| 344 | If you say yes here you get support for Dallas Semiconductor |
| 345 | DS620 sensor chip. |
| 346 | |
| 347 | This driver can also be built as a module. If so, the module |
| 348 | will be called ds620. |
| 349 | |
| 350 | config SENSORS_DS1621 |
| 351 | tristate "Dallas Semiconductor DS1621 and compatibles" |
| 352 | depends on I2C |
| 353 | help |
| 354 | If you say yes here you get support for Dallas Semiconductor/Maxim |
| 355 | Integrated DS1621 sensor chips and compatible models including: |
| 356 | |
| 357 | - Dallas Semiconductor DS1625 |
| 358 | - Maxim Integrated DS1631 |
| 359 | - Maxim Integrated DS1721 |
| 360 | - Maxim Integrated DS1731 |
| 361 | |
| 362 | This driver can also be built as a module. If so, the module |
| 363 | will be called ds1621. |
| 364 | |
| 365 | config SENSORS_DA9052_ADC |
| 366 | tristate "Dialog DA9052/DA9053 ADC" |
| 367 | depends on PMIC_DA9052 |
| 368 | help |
| 369 | Say y here to support the ADC found on Dialog Semiconductor |
| 370 | DA9052-BC and DA9053-AA/Bx PMICs. |
| 371 | |
| 372 | This driver can also be built as module. If so, the module |
| 373 | will be called da9052-hwmon. |
| 374 | |
| 375 | config SENSORS_DA9055 |
| 376 | tristate "Dialog Semiconductor DA9055 ADC" |
| 377 | depends on MFD_DA9055 |
| 378 | help |
| 379 | If you say yes here you get support for ADC on the Dialog |
| 380 | Semiconductor DA9055 PMIC. |
| 381 | |
| 382 | This driver can also be built as a module. If so, the module |
| 383 | will be called da9055-hwmon. |
| 384 | |
| 385 | config SENSORS_I5K_AMB |
| 386 | tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets" |
| 387 | depends on PCI |
| 388 | help |
| 389 | If you say yes here you get support for FB-DIMM AMB temperature |
| 390 | monitoring chips on systems with the Intel 5000 series chipset. |
| 391 | |
| 392 | This driver can also be built as a module. If so, the module |
| 393 | will be called i5k_amb. |
| 394 | |
| 395 | config SENSORS_F71805F |
| 396 | tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG" |
| 397 | depends on !PPC |
| 398 | help |
| 399 | If you say yes here you get support for hardware monitoring |
| 400 | features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG |
| 401 | Super-I/O chips. |
| 402 | |
| 403 | This driver can also be built as a module. If so, the module |
| 404 | will be called f71805f. |
| 405 | |
| 406 | config SENSORS_F71882FG |
| 407 | tristate "Fintek F71882FG and compatibles" |
| 408 | depends on !PPC |
| 409 | help |
| 410 | If you say yes here you get support for hardware monitoring |
| 411 | features of many Fintek Super-I/O (LPC) chips. The currently |
| 412 | supported chips are: |
| 413 | F71808E/A |
| 414 | F71858FG |
| 415 | F71862FG |
| 416 | F71863FG |
| 417 | F71869F/E/A |
| 418 | F71882FG |
| 419 | F71883FG |
| 420 | F71889FG/ED/A |
| 421 | F8000 |
| 422 | F81801U |
| 423 | F81865F |
| 424 | |
| 425 | This driver can also be built as a module. If so, the module |
| 426 | will be called f71882fg. |
| 427 | |
| 428 | config SENSORS_F75375S |
| 429 | tristate "Fintek F75375S/SP, F75373 and F75387" |
| 430 | depends on I2C |
| 431 | help |
| 432 | If you say yes here you get support for hardware monitoring |
| 433 | features of the Fintek F75375S/SP, F75373 and F75387 |
| 434 | |
| 435 | This driver can also be built as a module. If so, the module |
| 436 | will be called f75375s. |
| 437 | |
| 438 | config SENSORS_FSCHMD |
| 439 | tristate "Fujitsu Siemens Computers sensor chips" |
| 440 | depends on X86 && I2C |
| 441 | help |
| 442 | If you say yes here you get support for the following Fujitsu |
| 443 | Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes, |
| 444 | Heimdall, Heracles, Hades and Syleus including support for the |
| 445 | integrated watchdog. |
| 446 | |
| 447 | This is a merged driver for FSC sensor chips replacing the fscpos, |
| 448 | fscscy and fscher drivers and adding support for several other FSC |
| 449 | sensor chips. |
| 450 | |
| 451 | This driver can also be built as a module. If so, the module |
| 452 | will be called fschmd. |
| 453 | |
| 454 | config SENSORS_G760A |
| 455 | tristate "GMT G760A" |
| 456 | depends on I2C |
| 457 | help |
| 458 | If you say yes here you get support for Global Mixed-mode |
| 459 | Technology Inc G760A fan speed PWM controller chips. |
| 460 | |
| 461 | This driver can also be built as a module. If so, the module |
| 462 | will be called g760a. |
| 463 | |
| 464 | config SENSORS_G762 |
| 465 | tristate "GMT G762 and G763" |
| 466 | depends on I2C |
| 467 | help |
| 468 | If you say yes here you get support for Global Mixed-mode |
| 469 | Technology Inc G762 and G763 fan speed PWM controller chips. |
| 470 | |
| 471 | This driver can also be built as a module. If so, the module |
| 472 | will be called g762. |
| 473 | |
| 474 | config SENSORS_GL518SM |
| 475 | tristate "Genesys Logic GL518SM" |
| 476 | depends on I2C |
| 477 | help |
| 478 | If you say yes here you get support for Genesys Logic GL518SM |
| 479 | sensor chips. |
| 480 | |
| 481 | This driver can also be built as a module. If so, the module |
| 482 | will be called gl518sm. |
| 483 | |
| 484 | config SENSORS_GL520SM |
| 485 | tristate "Genesys Logic GL520SM" |
| 486 | depends on I2C |
| 487 | select HWMON_VID |
| 488 | help |
| 489 | If you say yes here you get support for Genesys Logic GL520SM |
| 490 | sensor chips. |
| 491 | |
| 492 | This driver can also be built as a module. If so, the module |
| 493 | will be called gl520sm. |
| 494 | |
| 495 | config SENSORS_GPIO_FAN |
| 496 | tristate "GPIO fan" |
| 497 | depends on GPIOLIB |
| 498 | help |
| 499 | If you say yes here you get support for fans connected to GPIO lines. |
| 500 | |
| 501 | This driver can also be built as a module. If so, the module |
| 502 | will be called gpio-fan. |
| 503 | |
| 504 | config SENSORS_HIH6130 |
| 505 | tristate "Honeywell Humidicon HIH-6130 humidity/temperature sensor" |
| 506 | depends on I2C |
| 507 | help |
| 508 | If you say yes here you get support for Honeywell Humidicon |
| 509 | HIH-6130 and HIH-6131 Humidicon humidity sensors. |
| 510 | |
| 511 | This driver can also be built as a module. If so, the module |
| 512 | will be called hih6130. |
| 513 | |
| 514 | config SENSORS_HTU21 |
| 515 | tristate "Measurement Specialties HTU21D humidity/temperature sensors" |
| 516 | depends on I2C |
| 517 | help |
| 518 | If you say yes here you get support for the Measurement Specialties |
| 519 | HTU21D humidity and temperature sensors. |
| 520 | |
| 521 | This driver can also be built as a module. If so, the module |
| 522 | will be called htu21. |
| 523 | |
| 524 | config SENSORS_CORETEMP |
| 525 | tristate "Intel Core/Core2/Atom temperature sensor" |
| 526 | depends on X86 |
| 527 | help |
| 528 | If you say yes here you get support for the temperature |
| 529 | sensor inside your CPU. Most of the family 6 CPUs |
| 530 | are supported. Check Documentation/hwmon/coretemp for details. |
| 531 | |
| 532 | config SENSORS_IBMAEM |
| 533 | tristate "IBM Active Energy Manager temperature/power sensors and control" |
| 534 | select IPMI_SI |
| 535 | depends on IPMI_HANDLER |
| 536 | help |
| 537 | If you say yes here you get support for the temperature and |
| 538 | power sensors and capping hardware in various IBM System X |
| 539 | servers that support Active Energy Manager. This includes |
| 540 | the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2, |
| 541 | and certain HC10/HS2x/LS2x/QS2x blades. |
| 542 | |
| 543 | This driver can also be built as a module. If so, the module |
| 544 | will be called ibmaem. |
| 545 | |
| 546 | config SENSORS_IBMPEX |
| 547 | tristate "IBM PowerExecutive temperature/power sensors" |
| 548 | select IPMI_SI |
| 549 | depends on IPMI_HANDLER |
| 550 | help |
| 551 | If you say yes here you get support for the temperature and |
| 552 | power sensors in various IBM System X servers that support |
| 553 | PowerExecutive. So far this includes the x3350, x3550, x3650, |
| 554 | x3655, and x3755; the x3800, x3850, and x3950 models that have |
| 555 | PCI Express; and some of the HS2x, LS2x, and QS2x blades. |
| 556 | |
| 557 | This driver can also be built as a module. If so, the module |
| 558 | will be called ibmpex. |
| 559 | |
| 560 | config SENSORS_IIO_HWMON |
| 561 | tristate "Hwmon driver that uses channels specified via iio maps" |
| 562 | depends on IIO |
| 563 | help |
| 564 | This is a platform driver that in combination with a suitable |
| 565 | map allows IIO devices to provide basic hwmon functionality |
| 566 | for those channels specified in the map. This map can be provided |
| 567 | either via platform data or the device tree bindings. |
| 568 | |
| 569 | config SENSORS_IT87 |
| 570 | tristate "ITE IT87xx and compatibles" |
| 571 | depends on !PPC |
| 572 | select HWMON_VID |
| 573 | help |
| 574 | If you say yes here you get support for ITE IT8705F, IT8712F, |
| 575 | IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E, |
| 576 | IT8771E, IT8772E, IT8782F, and IT8783E/F sensor chips, and the |
| 577 | SiS950 clone. |
| 578 | |
| 579 | This driver can also be built as a module. If so, the module |
| 580 | will be called it87. |
| 581 | |
| 582 | config SENSORS_JZ4740 |
| 583 | tristate "Ingenic JZ4740 SoC ADC driver" |
| 584 | depends on MACH_JZ4740 && MFD_JZ4740_ADC |
| 585 | help |
| 586 | If you say yes here you get support for reading adc values from the ADCIN |
| 587 | pin on Ingenic JZ4740 SoC based boards. |
| 588 | |
| 589 | This driver can also be build as a module. If so, the module will be |
| 590 | called jz4740-hwmon. |
| 591 | |
| 592 | config SENSORS_JC42 |
| 593 | tristate "JEDEC JC42.4 compliant memory module temperature sensors" |
| 594 | depends on I2C |
| 595 | help |
| 596 | If you say yes here, you get support for JEDEC JC42.4 compliant |
| 597 | temperature sensors, which are used on many DDR3 memory modules for |
| 598 | mobile devices and servers. Support will include, but not be limited |
| 599 | to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805, |
| 600 | MCP98242, MCP98243, MCP98244, MCP9843, SE97, SE98, STTS424(E), |
| 601 | STTS2002, STTS3000, TSE2002B3, TSE2002GB2, TS3000B3, and TS3000GB2. |
| 602 | |
| 603 | This driver can also be built as a module. If so, the module |
| 604 | will be called jc42. |
| 605 | |
| 606 | config SENSORS_LINEAGE |
| 607 | tristate "Lineage Compact Power Line Power Entry Module" |
| 608 | depends on I2C |
| 609 | help |
| 610 | If you say yes here you get support for the Lineage Compact Power Line |
| 611 | series of DC/DC and AC/DC converters such as CP1800, CP2000AC, |
| 612 | CP2000DC, CP2725, and others. |
| 613 | |
| 614 | This driver can also be built as a module. If so, the module |
| 615 | will be called lineage-pem. |
| 616 | |
| 617 | config SENSORS_LM63 |
| 618 | tristate "National Semiconductor LM63 and compatibles" |
| 619 | depends on I2C |
| 620 | help |
| 621 | If you say yes here you get support for the National |
| 622 | Semiconductor LM63, LM64, and LM96163 remote diode digital temperature |
| 623 | sensors with integrated fan control. Such chips are found |
| 624 | on the Tyan S4882 (Thunder K8QS Pro) motherboard, among |
| 625 | others. |
| 626 | |
| 627 | This driver can also be built as a module. If so, the module |
| 628 | will be called lm63. |
| 629 | |
| 630 | config SENSORS_LM70 |
| 631 | tristate "National Semiconductor LM70 and compatibles" |
| 632 | depends on SPI_MASTER |
| 633 | help |
| 634 | If you say yes here you get support for the National Semiconductor |
| 635 | LM70, LM71, LM74 and Texas Instruments TMP121/TMP123 digital tempera- |
| 636 | ture sensor chips. |
| 637 | |
| 638 | This driver can also be built as a module. If so, the module |
| 639 | will be called lm70. |
| 640 | |
| 641 | config SENSORS_LM73 |
| 642 | tristate "National Semiconductor LM73" |
| 643 | depends on I2C |
| 644 | help |
| 645 | If you say yes here you get support for National Semiconductor LM73 |
| 646 | sensor chips. |
| 647 | This driver can also be built as a module. If so, the module |
| 648 | will be called lm73. |
| 649 | |
| 650 | config SENSORS_LM75 |
| 651 | tristate "National Semiconductor LM75 and compatibles" |
| 652 | depends on I2C |
| 653 | help |
| 654 | If you say yes here you get support for one common type of |
| 655 | temperature sensor chip, with models including: |
| 656 | |
| 657 | - Analog Devices ADT75 |
| 658 | - Dallas Semiconductor DS75, DS1775 and DS7505 |
| 659 | - Maxim MAX6625 and MAX6626 |
| 660 | - Microchip MCP980x |
| 661 | - National Semiconductor LM75, LM75A |
| 662 | - NXP's LM75A |
| 663 | - ST Microelectronics STDS75 |
| 664 | - TelCom (now Microchip) TCN75 |
| 665 | - Texas Instruments TMP100, TMP101, TMP105, TMP75, TMP175, |
| 666 | TMP275 |
| 667 | |
| 668 | This driver supports driver model based binding through board |
| 669 | specific I2C device tables. |
| 670 | |
| 671 | It also supports the "legacy" style of driver binding. To use |
| 672 | that with some chips which don't replicate LM75 quirks exactly, |
| 673 | you may need the "force" module parameter. |
| 674 | |
| 675 | This driver can also be built as a module. If so, the module |
| 676 | will be called lm75. |
| 677 | |
| 678 | config SENSORS_LM77 |
| 679 | tristate "National Semiconductor LM77" |
| 680 | depends on I2C |
| 681 | help |
| 682 | If you say yes here you get support for National Semiconductor LM77 |
| 683 | sensor chips. |
| 684 | |
| 685 | This driver can also be built as a module. If so, the module |
| 686 | will be called lm77. |
| 687 | |
| 688 | config SENSORS_LM78 |
| 689 | tristate "National Semiconductor LM78 and compatibles" |
| 690 | depends on I2C |
| 691 | select HWMON_VID |
| 692 | help |
| 693 | If you say yes here you get support for National Semiconductor LM78, |
| 694 | LM78-J and LM79. |
| 695 | |
| 696 | This driver can also be built as a module. If so, the module |
| 697 | will be called lm78. |
| 698 | |
| 699 | config SENSORS_LM80 |
| 700 | tristate "National Semiconductor LM80 and LM96080" |
| 701 | depends on I2C |
| 702 | help |
| 703 | If you say yes here you get support for National Semiconductor |
| 704 | LM80 and LM96080 sensor chips. |
| 705 | |
| 706 | This driver can also be built as a module. If so, the module |
| 707 | will be called lm80. |
| 708 | |
| 709 | config SENSORS_LM83 |
| 710 | tristate "National Semiconductor LM83 and compatibles" |
| 711 | depends on I2C |
| 712 | help |
| 713 | If you say yes here you get support for National Semiconductor |
| 714 | LM82 and LM83 sensor chips. |
| 715 | |
| 716 | This driver can also be built as a module. If so, the module |
| 717 | will be called lm83. |
| 718 | |
| 719 | config SENSORS_LM85 |
| 720 | tristate "National Semiconductor LM85 and compatibles" |
| 721 | depends on I2C |
| 722 | select HWMON_VID |
| 723 | help |
| 724 | If you say yes here you get support for National Semiconductor LM85 |
| 725 | sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100, |
| 726 | EMC6D101, EMC6D102, and EMC6D103. |
| 727 | |
| 728 | This driver can also be built as a module. If so, the module |
| 729 | will be called lm85. |
| 730 | |
| 731 | config SENSORS_LM87 |
| 732 | tristate "National Semiconductor LM87 and compatibles" |
| 733 | depends on I2C |
| 734 | select HWMON_VID |
| 735 | help |
| 736 | If you say yes here you get support for National Semiconductor LM87 |
| 737 | and Analog Devices ADM1024 sensor chips. |
| 738 | |
| 739 | This driver can also be built as a module. If so, the module |
| 740 | will be called lm87. |
| 741 | |
| 742 | config SENSORS_LM90 |
| 743 | tristate "National Semiconductor LM90 and compatibles" |
| 744 | depends on I2C |
| 745 | help |
| 746 | If you say yes here you get support for National Semiconductor LM90, |
| 747 | LM86, LM89 and LM99, Analog Devices ADM1032, ADT7461, and ADT7461A, |
| 748 | Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659, |
| 749 | MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, ON Semiconductor NCT1008, |
| 750 | Winbond/Nuvoton W83L771W/G/AWG/ASG, Philips SA56004, and GMT G781 |
| 751 | sensor chips. |
| 752 | |
| 753 | This driver can also be built as a module. If so, the module |
| 754 | will be called lm90. |
| 755 | |
| 756 | config SENSORS_LM92 |
| 757 | tristate "National Semiconductor LM92 and compatibles" |
| 758 | depends on I2C |
| 759 | help |
| 760 | If you say yes here you get support for National Semiconductor LM92 |
| 761 | and Maxim MAX6635 sensor chips. |
| 762 | |
| 763 | This driver can also be built as a module. If so, the module |
| 764 | will be called lm92. |
| 765 | |
| 766 | config SENSORS_LM93 |
| 767 | tristate "National Semiconductor LM93 and compatibles" |
| 768 | depends on I2C |
| 769 | select HWMON_VID |
| 770 | help |
| 771 | If you say yes here you get support for National Semiconductor LM93, |
| 772 | LM94, and compatible sensor chips. |
| 773 | |
| 774 | This driver can also be built as a module. If so, the module |
| 775 | will be called lm93. |
| 776 | |
| 777 | config SENSORS_LTC4151 |
| 778 | tristate "Linear Technology LTC4151" |
| 779 | depends on I2C |
| 780 | default n |
| 781 | help |
| 782 | If you say yes here you get support for Linear Technology LTC4151 |
| 783 | High Voltage I2C Current and Voltage Monitor interface. |
| 784 | |
| 785 | This driver can also be built as a module. If so, the module will |
| 786 | be called ltc4151. |
| 787 | |
| 788 | config SENSORS_LTC4215 |
| 789 | tristate "Linear Technology LTC4215" |
| 790 | depends on I2C |
| 791 | default n |
| 792 | help |
| 793 | If you say yes here you get support for Linear Technology LTC4215 |
| 794 | Hot Swap Controller I2C interface. |
| 795 | |
| 796 | This driver can also be built as a module. If so, the module will |
| 797 | be called ltc4215. |
| 798 | |
| 799 | config SENSORS_LTC4245 |
| 800 | tristate "Linear Technology LTC4245" |
| 801 | depends on I2C |
| 802 | default n |
| 803 | help |
| 804 | If you say yes here you get support for Linear Technology LTC4245 |
| 805 | Multiple Supply Hot Swap Controller I2C interface. |
| 806 | |
| 807 | This driver can also be built as a module. If so, the module will |
| 808 | be called ltc4245. |
| 809 | |
| 810 | config SENSORS_LTC4261 |
| 811 | tristate "Linear Technology LTC4261" |
| 812 | depends on I2C |
| 813 | default n |
| 814 | help |
| 815 | If you say yes here you get support for Linear Technology LTC4261 |
| 816 | Negative Voltage Hot Swap Controller I2C interface. |
| 817 | |
| 818 | This driver can also be built as a module. If so, the module will |
| 819 | be called ltc4261. |
| 820 | |
| 821 | config SENSORS_LM95234 |
| 822 | tristate "National Semiconductor LM95234" |
| 823 | depends on I2C |
| 824 | help |
| 825 | If you say yes here you get support for the LM95234 temperature |
| 826 | sensor. |
| 827 | |
| 828 | This driver can also be built as a module. If so, the module |
| 829 | will be called lm95234. |
| 830 | |
| 831 | config SENSORS_LM95241 |
| 832 | tristate "National Semiconductor LM95241 and compatibles" |
| 833 | depends on I2C |
| 834 | help |
| 835 | If you say yes here you get support for LM95231 and LM95241 sensor |
| 836 | chips. |
| 837 | |
| 838 | This driver can also be built as a module. If so, the module |
| 839 | will be called lm95241. |
| 840 | |
| 841 | config SENSORS_LM95245 |
| 842 | tristate "National Semiconductor LM95245 sensor chip" |
| 843 | depends on I2C |
| 844 | help |
| 845 | If you say yes here you get support for LM95245 sensor chip. |
| 846 | |
| 847 | This driver can also be built as a module. If so, the module |
| 848 | will be called lm95245. |
| 849 | |
| 850 | config SENSORS_MAX1111 |
| 851 | tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles" |
| 852 | depends on SPI_MASTER |
| 853 | help |
| 854 | Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113 |
| 855 | ADC chips. |
| 856 | |
| 857 | This driver can also be built as a module. If so, the module |
| 858 | will be called max1111. |
| 859 | |
| 860 | config SENSORS_MAX16065 |
| 861 | tristate "Maxim MAX16065 System Manager and compatibles" |
| 862 | depends on I2C |
| 863 | help |
| 864 | If you say yes here you get support for hardware monitoring |
| 865 | capabilities of the following Maxim System Manager chips. |
| 866 | MAX16065 |
| 867 | MAX16066 |
| 868 | MAX16067 |
| 869 | MAX16068 |
| 870 | MAX16070 |
| 871 | MAX16071 |
| 872 | |
| 873 | This driver can also be built as a module. If so, the module |
| 874 | will be called max16065. |
| 875 | |
| 876 | config SENSORS_MAX1619 |
| 877 | tristate "Maxim MAX1619 sensor chip" |
| 878 | depends on I2C |
| 879 | help |
| 880 | If you say yes here you get support for MAX1619 sensor chip. |
| 881 | |
| 882 | This driver can also be built as a module. If so, the module |
| 883 | will be called max1619. |
| 884 | |
| 885 | config SENSORS_MAX1668 |
| 886 | tristate "Maxim MAX1668 and compatibles" |
| 887 | depends on I2C |
| 888 | help |
| 889 | If you say yes here you get support for MAX1668, MAX1989 and |
| 890 | MAX1805 chips. |
| 891 | |
| 892 | This driver can also be built as a module. If so, the module |
| 893 | will be called max1668. |
| 894 | |
| 895 | config SENSORS_MAX197 |
| 896 | tristate "Maxim MAX197 and compatibles" |
| 897 | help |
| 898 | Support for the Maxim MAX197 A/D converter. |
| 899 | Support will include, but not be limited to, MAX197, and MAX199. |
| 900 | |
| 901 | This driver can also be built as a module. If so, the module |
| 902 | will be called max197. |
| 903 | |
| 904 | config SENSORS_MAX6639 |
| 905 | tristate "Maxim MAX6639 sensor chip" |
| 906 | depends on I2C |
| 907 | help |
| 908 | If you say yes here you get support for the MAX6639 |
| 909 | sensor chips. |
| 910 | |
| 911 | This driver can also be built as a module. If so, the module |
| 912 | will be called max6639. |
| 913 | |
| 914 | config SENSORS_MAX6642 |
| 915 | tristate "Maxim MAX6642 sensor chip" |
| 916 | depends on I2C |
| 917 | help |
| 918 | If you say yes here you get support for MAX6642 sensor chip. |
| 919 | MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor |
| 920 | with Overtemperature Alarm from Maxim. |
| 921 | |
| 922 | This driver can also be built as a module. If so, the module |
| 923 | will be called max6642. |
| 924 | |
| 925 | config SENSORS_MAX6650 |
| 926 | tristate "Maxim MAX6650 sensor chip" |
| 927 | depends on I2C |
| 928 | help |
| 929 | If you say yes here you get support for the MAX6650 / MAX6651 |
| 930 | sensor chips. |
| 931 | |
| 932 | This driver can also be built as a module. If so, the module |
| 933 | will be called max6650. |
| 934 | |
| 935 | config SENSORS_MAX6697 |
| 936 | tristate "Maxim MAX6697 and compatibles" |
| 937 | depends on I2C |
| 938 | help |
| 939 | If you say yes here you get support for MAX6581, MAX6602, MAX6622, |
| 940 | MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699 |
| 941 | temperature sensor chips. |
| 942 | |
| 943 | This driver can also be built as a module. If so, the module |
| 944 | will be called max6697. |
| 945 | |
| 946 | config SENSORS_MCP3021 |
| 947 | tristate "Microchip MCP3021 and compatibles" |
| 948 | depends on I2C |
| 949 | help |
| 950 | If you say yes here you get support for MCP3021 and MCP3221. |
| 951 | The MCP3021 is a A/D converter (ADC) with 10-bit and the MCP3221 |
| 952 | with 12-bit resolution. |
| 953 | |
| 954 | This driver can also be built as a module. If so, the module |
| 955 | will be called mcp3021. |
| 956 | |
| 957 | config SENSORS_NCT6775 |
| 958 | tristate "Nuvoton NCT6775F and compatibles" |
| 959 | depends on !PPC |
| 960 | select HWMON_VID |
| 961 | help |
| 962 | If you say yes here you get support for the hardware monitoring |
| 963 | functionality of the Nuvoton NCT6775F, NCT6776F, NCT6779D |
| 964 | and compatible Super-I/O chips. This driver replaces the |
| 965 | w83627ehf driver for NCT6775F and NCT6776F. |
| 966 | |
| 967 | This driver can also be built as a module. If so, the module |
| 968 | will be called nct6775. |
| 969 | |
| 970 | config SENSORS_NTC_THERMISTOR |
| 971 | tristate "NTC thermistor support" |
| 972 | depends on (!OF && !IIO) || (OF && IIO) |
| 973 | help |
| 974 | This driver supports NTC thermistors sensor reading and its |
| 975 | interpretation. The driver can also monitor the temperature and |
| 976 | send notifications about the temperature. |
| 977 | |
| 978 | Currently, this driver supports |
| 979 | NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, and NCP15WL333. |
| 980 | |
| 981 | This driver can also be built as a module. If so, the module |
| 982 | will be called ntc-thermistor. |
| 983 | |
| 984 | config SENSORS_PC87360 |
| 985 | tristate "National Semiconductor PC87360 family" |
| 986 | depends on !PPC |
| 987 | select HWMON_VID |
| 988 | help |
| 989 | If you say yes here you get access to the hardware monitoring |
| 990 | functions of the National Semiconductor PC8736x Super-I/O chips. |
| 991 | The PC87360, PC87363 and PC87364 only have fan monitoring and |
| 992 | control. The PC87365 and PC87366 additionally have voltage and |
| 993 | temperature monitoring. |
| 994 | |
| 995 | This driver can also be built as a module. If so, the module |
| 996 | will be called pc87360. |
| 997 | |
| 998 | config SENSORS_PC87427 |
| 999 | tristate "National Semiconductor PC87427" |
| 1000 | depends on !PPC |
| 1001 | help |
| 1002 | If you say yes here you get access to the hardware monitoring |
| 1003 | functions of the National Semiconductor PC87427 Super-I/O chip. |
| 1004 | The chip has two distinct logical devices, one for fan speed |
| 1005 | monitoring and control, and one for voltage and temperature |
| 1006 | monitoring. Fan speed monitoring and control are supported, as |
| 1007 | well as temperature monitoring. Voltages aren't supported yet. |
| 1008 | |
| 1009 | This driver can also be built as a module. If so, the module |
| 1010 | will be called pc87427. |
| 1011 | |
| 1012 | config SENSORS_PCF8591 |
| 1013 | tristate "Philips PCF8591 ADC/DAC" |
| 1014 | depends on I2C |
| 1015 | default n |
| 1016 | help |
| 1017 | If you say yes here you get support for Philips PCF8591 4-channel |
| 1018 | ADC, 1-channel DAC chips. |
| 1019 | |
| 1020 | This driver can also be built as a module. If so, the module |
| 1021 | will be called pcf8591. |
| 1022 | |
| 1023 | These devices are hard to detect and rarely found on mainstream |
| 1024 | hardware. If unsure, say N. |
| 1025 | |
| 1026 | source drivers/hwmon/pmbus/Kconfig |
| 1027 | |
| 1028 | config SENSORS_SHT15 |
| 1029 | tristate "Sensiron humidity and temperature sensors. SHT15 and compat." |
| 1030 | depends on GPIOLIB |
| 1031 | help |
| 1032 | If you say yes here you get support for the Sensiron SHT10, SHT11, |
| 1033 | SHT15, SHT71, SHT75 humidity and temperature sensors. |
| 1034 | |
| 1035 | This driver can also be built as a module. If so, the module |
| 1036 | will be called sht15. |
| 1037 | |
| 1038 | config SENSORS_SHT21 |
| 1039 | tristate "Sensiron humidity and temperature sensors. SHT21 and compat." |
| 1040 | depends on I2C |
| 1041 | help |
| 1042 | If you say yes here you get support for the Sensiron SHT21, SHT25 |
| 1043 | humidity and temperature sensors. |
| 1044 | |
| 1045 | This driver can also be built as a module. If so, the module |
| 1046 | will be called sht21. |
| 1047 | |
| 1048 | config SENSORS_S3C |
| 1049 | tristate "Samsung built-in ADC" |
| 1050 | depends on S3C_ADC |
| 1051 | help |
| 1052 | If you say yes here you get support for the on-board ADCs of |
| 1053 | the Samsung S3C24XX, S3C64XX and other series of SoC |
| 1054 | |
| 1055 | This driver can also be built as a module. If so, the module |
| 1056 | will be called s3c-hwmon. |
| 1057 | |
| 1058 | config SENSORS_S3C_RAW |
| 1059 | bool "Include raw channel attributes in sysfs" |
| 1060 | depends on SENSORS_S3C |
| 1061 | help |
| 1062 | Say Y here if you want to include raw copies of all the ADC |
| 1063 | channels in sysfs. |
| 1064 | |
| 1065 | config SENSORS_SIS5595 |
| 1066 | tristate "Silicon Integrated Systems Corp. SiS5595" |
| 1067 | depends on PCI |
| 1068 | help |
| 1069 | If you say yes here you get support for the integrated sensors in |
| 1070 | SiS5595 South Bridges. |
| 1071 | |
| 1072 | This driver can also be built as a module. If so, the module |
| 1073 | will be called sis5595. |
| 1074 | |
| 1075 | config SENSORS_SMM665 |
| 1076 | tristate "Summit Microelectronics SMM665" |
| 1077 | depends on I2C |
| 1078 | default n |
| 1079 | help |
| 1080 | If you say yes here you get support for the hardware monitoring |
| 1081 | features of the Summit Microelectronics SMM665/SMM665B Six-Channel |
| 1082 | Active DC Output Controller / Monitor. |
| 1083 | |
| 1084 | Other supported chips are SMM465, SMM665C, SMM764, and SMM766. |
| 1085 | Support for those chips is untested. |
| 1086 | |
| 1087 | This driver can also be built as a module. If so, the module will |
| 1088 | be called smm665. |
| 1089 | |
| 1090 | config SENSORS_DME1737 |
| 1091 | tristate "SMSC DME1737, SCH311x and compatibles" |
| 1092 | depends on I2C && !PPC |
| 1093 | select HWMON_VID |
| 1094 | help |
| 1095 | If you say yes here you get support for the hardware monitoring |
| 1096 | and fan control features of the SMSC DME1737, SCH311x, SCH5027, and |
| 1097 | Asus A8000 Super-I/O chips. |
| 1098 | |
| 1099 | This driver can also be built as a module. If so, the module |
| 1100 | will be called dme1737. |
| 1101 | |
| 1102 | config SENSORS_EMC1403 |
| 1103 | tristate "SMSC EMC1403/23 thermal sensor" |
| 1104 | depends on I2C |
| 1105 | help |
| 1106 | If you say yes here you get support for the SMSC EMC1403/23 |
| 1107 | temperature monitoring chip. |
| 1108 | |
| 1109 | Threshold values can be configured using sysfs. |
| 1110 | Data from the different diodes are accessible via sysfs. |
| 1111 | |
| 1112 | config SENSORS_EMC2103 |
| 1113 | tristate "SMSC EMC2103" |
| 1114 | depends on I2C |
| 1115 | help |
| 1116 | If you say yes here you get support for the temperature |
| 1117 | and fan sensors of the SMSC EMC2103 chips. |
| 1118 | |
| 1119 | This driver can also be built as a module. If so, the module |
| 1120 | will be called emc2103. |
| 1121 | |
| 1122 | config SENSORS_EMC6W201 |
| 1123 | tristate "SMSC EMC6W201" |
| 1124 | depends on I2C |
| 1125 | help |
| 1126 | If you say yes here you get support for the SMSC EMC6W201 |
| 1127 | hardware monitoring chip. |
| 1128 | |
| 1129 | This driver can also be built as a module. If so, the module |
| 1130 | will be called emc6w201. |
| 1131 | |
| 1132 | config SENSORS_SMSC47M1 |
| 1133 | tristate "SMSC LPC47M10x and compatibles" |
| 1134 | depends on !PPC |
| 1135 | help |
| 1136 | If you say yes here you get support for the integrated fan |
| 1137 | monitoring and control capabilities of the SMSC LPC47B27x, |
| 1138 | LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x, |
| 1139 | LPC47M192, LPC47M292 and LPC47M997 chips. |
| 1140 | |
| 1141 | The temperature and voltage sensor features of the LPC47M15x, |
| 1142 | LPC47M192, LPC47M292 and LPC47M997 are supported by another |
| 1143 | driver, select also "SMSC LPC47M192 and compatibles" below for |
| 1144 | those. |
| 1145 | |
| 1146 | This driver can also be built as a module. If so, the module |
| 1147 | will be called smsc47m1. |
| 1148 | |
| 1149 | config SENSORS_SMSC47M192 |
| 1150 | tristate "SMSC LPC47M192 and compatibles" |
| 1151 | depends on I2C |
| 1152 | select HWMON_VID |
| 1153 | help |
| 1154 | If you say yes here you get support for the temperature and |
| 1155 | voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292 |
| 1156 | and LPC47M997 chips. |
| 1157 | |
| 1158 | The fan monitoring and control capabilities of these chips |
| 1159 | are supported by another driver, select |
| 1160 | "SMSC LPC47M10x and compatibles" above. You need both drivers |
| 1161 | if you want fan control and voltage/temperature sensor support. |
| 1162 | |
| 1163 | This driver can also be built as a module. If so, the module |
| 1164 | will be called smsc47m192. |
| 1165 | |
| 1166 | config SENSORS_SMSC47B397 |
| 1167 | tristate "SMSC LPC47B397-NC" |
| 1168 | depends on !PPC |
| 1169 | help |
| 1170 | If you say yes here you get support for the SMSC LPC47B397-NC |
| 1171 | sensor chip. |
| 1172 | |
| 1173 | This driver can also be built as a module. If so, the module |
| 1174 | will be called smsc47b397. |
| 1175 | |
| 1176 | config SENSORS_SCH56XX_COMMON |
| 1177 | tristate |
| 1178 | default n |
| 1179 | |
| 1180 | config SENSORS_SCH5627 |
| 1181 | tristate "SMSC SCH5627" |
| 1182 | depends on !PPC && WATCHDOG |
| 1183 | select SENSORS_SCH56XX_COMMON |
| 1184 | select WATCHDOG_CORE |
| 1185 | help |
| 1186 | If you say yes here you get support for the hardware monitoring |
| 1187 | features of the SMSC SCH5627 Super-I/O chip including support for |
| 1188 | the integrated watchdog. |
| 1189 | |
| 1190 | This driver can also be built as a module. If so, the module |
| 1191 | will be called sch5627. |
| 1192 | |
| 1193 | config SENSORS_SCH5636 |
| 1194 | tristate "SMSC SCH5636" |
| 1195 | depends on !PPC && WATCHDOG |
| 1196 | select SENSORS_SCH56XX_COMMON |
| 1197 | select WATCHDOG_CORE |
| 1198 | help |
| 1199 | SMSC SCH5636 Super I/O chips include an embedded microcontroller for |
| 1200 | hardware monitoring solutions, allowing motherboard manufacturers to |
| 1201 | create their own custom hwmon solution based upon the SCH5636. |
| 1202 | |
| 1203 | Currently this driver only supports the Fujitsu Theseus SCH5636 based |
| 1204 | hwmon solution. Say yes here if you want support for the Fujitsu |
| 1205 | Theseus' hardware monitoring features including support for the |
| 1206 | integrated watchdog. |
| 1207 | |
| 1208 | This driver can also be built as a module. If so, the module |
| 1209 | will be called sch5636. |
| 1210 | |
| 1211 | config SENSORS_ADS1015 |
| 1212 | tristate "Texas Instruments ADS1015" |
| 1213 | depends on I2C |
| 1214 | help |
| 1215 | If you say yes here you get support for Texas Instruments |
| 1216 | ADS1015/ADS1115 12/16-bit 4-input ADC device. |
| 1217 | |
| 1218 | This driver can also be built as a module. If so, the module |
| 1219 | will be called ads1015. |
| 1220 | |
| 1221 | config SENSORS_ADS7828 |
| 1222 | tristate "Texas Instruments ADS7828 and compatibles" |
| 1223 | depends on I2C |
| 1224 | help |
| 1225 | If you say yes here you get support for Texas Instruments ADS7828 and |
| 1226 | ADS7830 8-channel A/D converters. ADS7828 resolution is 12-bit, while |
| 1227 | it is 8-bit on ADS7830. |
| 1228 | |
| 1229 | This driver can also be built as a module. If so, the module |
| 1230 | will be called ads7828. |
| 1231 | |
| 1232 | config SENSORS_ADS7871 |
| 1233 | tristate "Texas Instruments ADS7871 A/D converter" |
| 1234 | depends on SPI |
| 1235 | help |
| 1236 | If you say yes here you get support for TI ADS7871 & ADS7870 |
| 1237 | |
| 1238 | This driver can also be built as a module. If so, the module |
| 1239 | will be called ads7871. |
| 1240 | |
| 1241 | config SENSORS_AMC6821 |
| 1242 | tristate "Texas Instruments AMC6821" |
| 1243 | depends on I2C |
| 1244 | help |
| 1245 | If you say yes here you get support for the Texas Instruments |
| 1246 | AMC6821 hardware monitoring chips. |
| 1247 | |
| 1248 | This driver can also be build as a module. If so, the module |
| 1249 | will be called amc6821. |
| 1250 | |
| 1251 | config SENSORS_INA209 |
| 1252 | tristate "TI / Burr Brown INA209" |
| 1253 | depends on I2C |
| 1254 | help |
| 1255 | If you say yes here you get support for the TI / Burr Brown INA209 |
| 1256 | voltage / current / power monitor I2C interface. |
| 1257 | |
| 1258 | This driver can also be built as a module. If so, the module will |
| 1259 | be called ina209. |
| 1260 | |
| 1261 | config SENSORS_INA2XX |
| 1262 | tristate "Texas Instruments INA219 and compatibles" |
| 1263 | depends on I2C |
| 1264 | help |
| 1265 | If you say yes here you get support for INA219, INA220, INA226, and |
| 1266 | INA230 power monitor chips. |
| 1267 | |
| 1268 | The INA2xx driver is configured for the default configuration of |
| 1269 | the part as described in the datasheet. |
| 1270 | Default value for Rshunt is 10 mOhms. |
| 1271 | This driver can also be built as a module. If so, the module |
| 1272 | will be called ina2xx. |
| 1273 | |
| 1274 | config SENSORS_THMC50 |
| 1275 | tristate "Texas Instruments THMC50 / Analog Devices ADM1022" |
| 1276 | depends on I2C |
| 1277 | help |
| 1278 | If you say yes here you get support for Texas Instruments THMC50 |
| 1279 | sensor chips and clones: the Analog Devices ADM1022. |
| 1280 | |
| 1281 | This driver can also be built as a module. If so, the module |
| 1282 | will be called thmc50. |
| 1283 | |
| 1284 | config SENSORS_TMP102 |
| 1285 | tristate "Texas Instruments TMP102" |
| 1286 | depends on I2C |
| 1287 | help |
| 1288 | If you say yes here you get support for Texas Instruments TMP102 |
| 1289 | sensor chips. |
| 1290 | |
| 1291 | This driver can also be built as a module. If so, the module |
| 1292 | will be called tmp102. |
| 1293 | |
| 1294 | config SENSORS_TMP401 |
| 1295 | tristate "Texas Instruments TMP401 and compatibles" |
| 1296 | depends on I2C |
| 1297 | help |
| 1298 | If you say yes here you get support for Texas Instruments TMP401, |
| 1299 | TMP411, TMP431, and TMP432 temperature sensor chips. |
| 1300 | |
| 1301 | This driver can also be built as a module. If so, the module |
| 1302 | will be called tmp401. |
| 1303 | |
| 1304 | config SENSORS_TMP421 |
| 1305 | tristate "Texas Instruments TMP421 and compatible" |
| 1306 | depends on I2C |
| 1307 | help |
| 1308 | If you say yes here you get support for Texas Instruments TMP421, |
| 1309 | TMP422 and TMP423 temperature sensor chips. |
| 1310 | |
| 1311 | This driver can also be built as a module. If so, the module |
| 1312 | will be called tmp421. |
| 1313 | |
| 1314 | config SENSORS_TWL4030_MADC |
| 1315 | tristate "Texas Instruments TWL4030 MADC Hwmon" |
| 1316 | depends on TWL4030_MADC |
| 1317 | help |
| 1318 | If you say yes here you get hwmon support for triton |
| 1319 | TWL4030-MADC. |
| 1320 | |
| 1321 | This driver can also be built as a module. If so it will be called |
| 1322 | twl4030-madc-hwmon. |
| 1323 | |
| 1324 | config SENSORS_VEXPRESS |
| 1325 | tristate "Versatile Express" |
| 1326 | depends on VEXPRESS_CONFIG |
| 1327 | help |
| 1328 | This driver provides support for hardware sensors available on |
| 1329 | the ARM Ltd's Versatile Express platform. It can provide wide |
| 1330 | range of information like temperature, power, energy. |
| 1331 | |
| 1332 | config SENSORS_VIA_CPUTEMP |
| 1333 | tristate "VIA CPU temperature sensor" |
| 1334 | depends on X86 |
| 1335 | select HWMON_VID |
| 1336 | help |
| 1337 | If you say yes here you get support for the temperature |
| 1338 | sensor inside your CPU. Supported are all known variants of |
| 1339 | the VIA C7 and Nano. |
| 1340 | |
| 1341 | config SENSORS_VIA686A |
| 1342 | tristate "VIA686A" |
| 1343 | depends on PCI |
| 1344 | help |
| 1345 | If you say yes here you get support for the integrated sensors in |
| 1346 | Via 686A/B South Bridges. |
| 1347 | |
| 1348 | This driver can also be built as a module. If so, the module |
| 1349 | will be called via686a. |
| 1350 | |
| 1351 | config SENSORS_VT1211 |
| 1352 | tristate "VIA VT1211" |
| 1353 | depends on !PPC |
| 1354 | select HWMON_VID |
| 1355 | help |
| 1356 | If you say yes here then you get support for hardware monitoring |
| 1357 | features of the VIA VT1211 Super-I/O chip. |
| 1358 | |
| 1359 | This driver can also be built as a module. If so, the module |
| 1360 | will be called vt1211. |
| 1361 | |
| 1362 | config SENSORS_VT8231 |
| 1363 | tristate "VIA VT8231" |
| 1364 | depends on PCI |
| 1365 | select HWMON_VID |
| 1366 | help |
| 1367 | If you say yes here then you get support for the integrated sensors |
| 1368 | in the VIA VT8231 device. |
| 1369 | |
| 1370 | This driver can also be built as a module. If so, the module |
| 1371 | will be called vt8231. |
| 1372 | |
| 1373 | config SENSORS_W83781D |
| 1374 | tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F" |
| 1375 | depends on I2C |
| 1376 | select HWMON_VID |
| 1377 | help |
| 1378 | If you say yes here you get support for the Winbond W8378x series |
| 1379 | of sensor chips: the W83781D, W83782D and W83783S, and the similar |
| 1380 | Asus AS99127F. |
| 1381 | |
| 1382 | This driver can also be built as a module. If so, the module |
| 1383 | will be called w83781d. |
| 1384 | |
| 1385 | config SENSORS_W83791D |
| 1386 | tristate "Winbond W83791D" |
| 1387 | depends on I2C |
| 1388 | select HWMON_VID |
| 1389 | help |
| 1390 | If you say yes here you get support for the Winbond W83791D chip. |
| 1391 | |
| 1392 | This driver can also be built as a module. If so, the module |
| 1393 | will be called w83791d. |
| 1394 | |
| 1395 | config SENSORS_W83792D |
| 1396 | tristate "Winbond W83792D" |
| 1397 | depends on I2C |
| 1398 | help |
| 1399 | If you say yes here you get support for the Winbond W83792D chip. |
| 1400 | |
| 1401 | This driver can also be built as a module. If so, the module |
| 1402 | will be called w83792d. |
| 1403 | |
| 1404 | config SENSORS_W83793 |
| 1405 | tristate "Winbond W83793" |
| 1406 | depends on I2C |
| 1407 | select HWMON_VID |
| 1408 | help |
| 1409 | If you say yes here you get support for the Winbond W83793 |
| 1410 | hardware monitoring chip, including support for the integrated |
| 1411 | watchdog. |
| 1412 | |
| 1413 | This driver can also be built as a module. If so, the module |
| 1414 | will be called w83793. |
| 1415 | |
| 1416 | config SENSORS_W83795 |
| 1417 | tristate "Winbond/Nuvoton W83795G/ADG" |
| 1418 | depends on I2C |
| 1419 | help |
| 1420 | If you say yes here you get support for the Winbond W83795G and |
| 1421 | W83795ADG hardware monitoring chip, including manual fan speed |
| 1422 | control. |
| 1423 | |
| 1424 | This driver can also be built as a module. If so, the module |
| 1425 | will be called w83795. |
| 1426 | |
| 1427 | config SENSORS_W83795_FANCTRL |
| 1428 | boolean "Include automatic fan control support (DANGEROUS)" |
| 1429 | depends on SENSORS_W83795 |
| 1430 | default n |
| 1431 | help |
| 1432 | If you say yes here, support for automatic fan speed control |
| 1433 | will be included in the driver. |
| 1434 | |
| 1435 | This part of the code wasn't carefully reviewed and tested yet, |
| 1436 | so enabling this option is strongly discouraged on production |
| 1437 | servers. Only developers and testers should enable it for the |
| 1438 | time being. |
| 1439 | |
| 1440 | Please also note that this option will create sysfs attribute |
| 1441 | files which may change in the future, so you shouldn't rely |
| 1442 | on them being stable. |
| 1443 | |
| 1444 | config SENSORS_W83L785TS |
| 1445 | tristate "Winbond W83L785TS-S" |
| 1446 | depends on I2C |
| 1447 | help |
| 1448 | If you say yes here you get support for the Winbond W83L785TS-S |
| 1449 | sensor chip, which is used on the Asus A7N8X, among other |
| 1450 | motherboards. |
| 1451 | |
| 1452 | This driver can also be built as a module. If so, the module |
| 1453 | will be called w83l785ts. |
| 1454 | |
| 1455 | config SENSORS_W83L786NG |
| 1456 | tristate "Winbond W83L786NG, W83L786NR" |
| 1457 | depends on I2C |
| 1458 | help |
| 1459 | If you say yes here you get support for the Winbond W83L786NG |
| 1460 | and W83L786NR sensor chips. |
| 1461 | |
| 1462 | This driver can also be built as a module. If so, the module |
| 1463 | will be called w83l786ng. |
| 1464 | |
| 1465 | config SENSORS_W83627HF |
| 1466 | tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF" |
| 1467 | depends on !PPC |
| 1468 | select HWMON_VID |
| 1469 | help |
| 1470 | If you say yes here you get support for the Winbond W836X7 series |
| 1471 | of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and |
| 1472 | W83697HF. |
| 1473 | |
| 1474 | This driver can also be built as a module. If so, the module |
| 1475 | will be called w83627hf. |
| 1476 | |
| 1477 | config SENSORS_W83627EHF |
| 1478 | tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG, NCT6775F, NCT6776F" |
| 1479 | depends on !PPC |
| 1480 | select HWMON_VID |
| 1481 | help |
| 1482 | If you say yes here you get support for the hardware |
| 1483 | monitoring functionality of the Winbond W83627EHF Super-I/O chip. |
| 1484 | |
| 1485 | This driver also supports the W83627EHG, which is the lead-free |
| 1486 | version of the W83627EHF, and the W83627DHG, which is a similar |
| 1487 | chip suited for specific Intel processors that use PECI such as |
| 1488 | the Core 2 Duo. And also the W83627UHG, which is a stripped down |
| 1489 | version of the W83627DHG (as far as hardware monitoring goes.) |
| 1490 | |
| 1491 | This driver also supports Nuvoton W83667HG, W83667HG-B, NCT6775F |
| 1492 | (also known as W83667HG-I), and NCT6776F. |
| 1493 | |
| 1494 | This driver can also be built as a module. If so, the module |
| 1495 | will be called w83627ehf. |
| 1496 | |
| 1497 | config SENSORS_WM831X |
| 1498 | tristate "WM831x PMICs" |
| 1499 | depends on MFD_WM831X |
| 1500 | help |
| 1501 | If you say yes here you get support for the hardware |
| 1502 | monitoring functionality of the Wolfson Microelectronics |
| 1503 | WM831x series of PMICs. |
| 1504 | |
| 1505 | This driver can also be built as a module. If so, the module |
| 1506 | will be called wm831x-hwmon. |
| 1507 | |
| 1508 | config SENSORS_WM8350 |
| 1509 | tristate "Wolfson Microelectronics WM835x" |
| 1510 | depends on MFD_WM8350 |
| 1511 | help |
| 1512 | If you say yes here you get support for the hardware |
| 1513 | monitoring features of the WM835x series of PMICs. |
| 1514 | |
| 1515 | This driver can also be built as a module. If so, the module |
| 1516 | will be called wm8350-hwmon. |
| 1517 | |
| 1518 | config SENSORS_ULTRA45 |
| 1519 | tristate "Sun Ultra45 PIC16F747" |
| 1520 | depends on SPARC64 |
| 1521 | help |
| 1522 | This driver provides support for the Ultra45 workstation environmental |
| 1523 | sensors. |
| 1524 | |
| 1525 | config SENSORS_APPLESMC |
| 1526 | tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)" |
| 1527 | depends on INPUT && X86 |
| 1528 | select NEW_LEDS |
| 1529 | select LEDS_CLASS |
| 1530 | select INPUT_POLLDEV |
| 1531 | default n |
| 1532 | help |
| 1533 | This driver provides support for the Apple System Management |
| 1534 | Controller, which provides an accelerometer (Apple Sudden Motion |
| 1535 | Sensor), light sensors, temperature sensors, keyboard backlight |
| 1536 | control and fan control. |
| 1537 | |
| 1538 | Only Intel-based Apple's computers are supported (MacBook Pro, |
| 1539 | MacBook, MacMini). |
| 1540 | |
| 1541 | Data from the different sensors, keyboard backlight control and fan |
| 1542 | control are accessible via sysfs. |
| 1543 | |
| 1544 | This driver also provides an absolute input class device, allowing |
| 1545 | the laptop to act as a pinball machine-esque joystick. |
| 1546 | |
| 1547 | Say Y here if you have an applicable laptop and want to experience |
| 1548 | the awesome power of applesmc. |
| 1549 | |
| 1550 | config SENSORS_MC13783_ADC |
| 1551 | tristate "Freescale MC13783/MC13892 ADC" |
| 1552 | depends on MFD_MC13XXX |
| 1553 | help |
| 1554 | Support for the A/D converter on MC13783 and MC13892 PMIC. |
| 1555 | |
| 1556 | if ACPI |
| 1557 | |
| 1558 | comment "ACPI drivers" |
| 1559 | |
| 1560 | config SENSORS_ACPI_POWER |
| 1561 | tristate "ACPI 4.0 power meter" |
| 1562 | help |
| 1563 | This driver exposes ACPI 4.0 power meters as hardware monitoring |
| 1564 | devices. Say Y (or M) if you have a computer with ACPI 4.0 firmware |
| 1565 | and a power meter. |
| 1566 | |
| 1567 | To compile this driver as a module, choose M here: |
| 1568 | the module will be called acpi_power_meter. |
| 1569 | |
| 1570 | config SENSORS_ATK0110 |
| 1571 | tristate "ASUS ATK0110" |
| 1572 | depends on X86 |
| 1573 | help |
| 1574 | If you say yes here you get support for the ACPI hardware |
| 1575 | monitoring interface found in many ASUS motherboards. This |
| 1576 | driver will provide readings of fans, voltages and temperatures |
| 1577 | through the system firmware. |
| 1578 | |
| 1579 | This driver can also be built as a module. If so, the module |
| 1580 | will be called asus_atk0110. |
| 1581 | |
| 1582 | endif # ACPI |
| 1583 | |
| 1584 | endif # HWMON |