| 1 | /* |
| 2 | * Driver for the Conexant CX23885 PCIe bridge |
| 3 | * |
| 4 | * Copyright (c) 2006 Steven Toth <stoth@linuxtv.org> |
| 5 | * |
| 6 | * This program is free software; you can redistribute it and/or modify |
| 7 | * it under the terms of the GNU General Public License as published by |
| 8 | * the Free Software Foundation; either version 2 of the License, or |
| 9 | * (at your option) any later version. |
| 10 | * |
| 11 | * This program is distributed in the hope that it will be useful, |
| 12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 14 | * |
| 15 | * GNU General Public License for more details. |
| 16 | */ |
| 17 | |
| 18 | #include <linux/module.h> |
| 19 | #include <linux/init.h> |
| 20 | #include <linux/device.h> |
| 21 | #include <linux/fs.h> |
| 22 | #include <linux/kthread.h> |
| 23 | #include <linux/file.h> |
| 24 | #include <linux/suspend.h> |
| 25 | |
| 26 | #include "cx23885.h" |
| 27 | #include <media/v4l2-common.h> |
| 28 | |
| 29 | #include "dvb_ca_en50221.h" |
| 30 | #include "s5h1409.h" |
| 31 | #include "s5h1411.h" |
| 32 | #include "mt2131.h" |
| 33 | #include "tda8290.h" |
| 34 | #include "tda18271.h" |
| 35 | #include "lgdt330x.h" |
| 36 | #include "xc4000.h" |
| 37 | #include "xc5000.h" |
| 38 | #include "max2165.h" |
| 39 | #include "tda10048.h" |
| 40 | #include "tuner-xc2028.h" |
| 41 | #include "tuner-simple.h" |
| 42 | #include "dib7000p.h" |
| 43 | #include "dib0070.h" |
| 44 | #include "dibx000_common.h" |
| 45 | #include "zl10353.h" |
| 46 | #include "stv0900.h" |
| 47 | #include "stv0900_reg.h" |
| 48 | #include "stv6110.h" |
| 49 | #include "lnbh24.h" |
| 50 | #include "cx24116.h" |
| 51 | #include "cx24117.h" |
| 52 | #include "cimax2.h" |
| 53 | #include "lgs8gxx.h" |
| 54 | #include "netup-eeprom.h" |
| 55 | #include "netup-init.h" |
| 56 | #include "lgdt3305.h" |
| 57 | #include "atbm8830.h" |
| 58 | #include "ts2020.h" |
| 59 | #include "ds3000.h" |
| 60 | #include "cx23885-f300.h" |
| 61 | #include "altera-ci.h" |
| 62 | #include "stv0367.h" |
| 63 | #include "drxk.h" |
| 64 | #include "mt2063.h" |
| 65 | #include "stv090x.h" |
| 66 | #include "stb6100.h" |
| 67 | #include "stb6100_cfg.h" |
| 68 | #include "tda10071.h" |
| 69 | #include "a8293.h" |
| 70 | #include "mb86a20s.h" |
| 71 | #include "si2165.h" |
| 72 | #include "si2168.h" |
| 73 | #include "si2157.h" |
| 74 | #include "sp2.h" |
| 75 | #include "m88ds3103.h" |
| 76 | #include "m88rs6000t.h" |
| 77 | |
| 78 | static unsigned int debug; |
| 79 | |
| 80 | #define dprintk(level, fmt, arg...)\ |
| 81 | do { if (debug >= level)\ |
| 82 | printk(KERN_DEBUG "%s/0: " fmt, dev->name, ## arg);\ |
| 83 | } while (0) |
| 84 | |
| 85 | /* ------------------------------------------------------------------ */ |
| 86 | |
| 87 | static unsigned int alt_tuner; |
| 88 | module_param(alt_tuner, int, 0644); |
| 89 | MODULE_PARM_DESC(alt_tuner, "Enable alternate tuner configuration"); |
| 90 | |
| 91 | DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); |
| 92 | |
| 93 | /* ------------------------------------------------------------------ */ |
| 94 | |
| 95 | static int queue_setup(struct vb2_queue *q, |
| 96 | unsigned int *num_buffers, unsigned int *num_planes, |
| 97 | unsigned int sizes[], void *alloc_ctxs[]) |
| 98 | { |
| 99 | struct cx23885_tsport *port = q->drv_priv; |
| 100 | |
| 101 | port->ts_packet_size = 188 * 4; |
| 102 | port->ts_packet_count = 32; |
| 103 | *num_planes = 1; |
| 104 | sizes[0] = port->ts_packet_size * port->ts_packet_count; |
| 105 | alloc_ctxs[0] = port->dev->alloc_ctx; |
| 106 | *num_buffers = 32; |
| 107 | return 0; |
| 108 | } |
| 109 | |
| 110 | |
| 111 | static int buffer_prepare(struct vb2_buffer *vb) |
| 112 | { |
| 113 | struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); |
| 114 | struct cx23885_tsport *port = vb->vb2_queue->drv_priv; |
| 115 | struct cx23885_buffer *buf = |
| 116 | container_of(vbuf, struct cx23885_buffer, vb); |
| 117 | |
| 118 | return cx23885_buf_prepare(buf, port); |
| 119 | } |
| 120 | |
| 121 | static void buffer_finish(struct vb2_buffer *vb) |
| 122 | { |
| 123 | struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); |
| 124 | struct cx23885_tsport *port = vb->vb2_queue->drv_priv; |
| 125 | struct cx23885_dev *dev = port->dev; |
| 126 | struct cx23885_buffer *buf = container_of(vbuf, |
| 127 | struct cx23885_buffer, vb); |
| 128 | |
| 129 | cx23885_free_buffer(dev, buf); |
| 130 | } |
| 131 | |
| 132 | static void buffer_queue(struct vb2_buffer *vb) |
| 133 | { |
| 134 | struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); |
| 135 | struct cx23885_tsport *port = vb->vb2_queue->drv_priv; |
| 136 | struct cx23885_buffer *buf = container_of(vbuf, |
| 137 | struct cx23885_buffer, vb); |
| 138 | |
| 139 | cx23885_buf_queue(port, buf); |
| 140 | } |
| 141 | |
| 142 | static void cx23885_dvb_gate_ctrl(struct cx23885_tsport *port, int open) |
| 143 | { |
| 144 | struct vb2_dvb_frontends *f; |
| 145 | struct vb2_dvb_frontend *fe; |
| 146 | |
| 147 | f = &port->frontends; |
| 148 | |
| 149 | if (f->gate <= 1) /* undefined or fe0 */ |
| 150 | fe = vb2_dvb_get_frontend(f, 1); |
| 151 | else |
| 152 | fe = vb2_dvb_get_frontend(f, f->gate); |
| 153 | |
| 154 | if (fe && fe->dvb.frontend && fe->dvb.frontend->ops.i2c_gate_ctrl) |
| 155 | fe->dvb.frontend->ops.i2c_gate_ctrl(fe->dvb.frontend, open); |
| 156 | } |
| 157 | |
| 158 | static int cx23885_start_streaming(struct vb2_queue *q, unsigned int count) |
| 159 | { |
| 160 | struct cx23885_tsport *port = q->drv_priv; |
| 161 | struct cx23885_dmaqueue *dmaq = &port->mpegq; |
| 162 | struct cx23885_buffer *buf = list_entry(dmaq->active.next, |
| 163 | struct cx23885_buffer, queue); |
| 164 | |
| 165 | cx23885_start_dma(port, dmaq, buf); |
| 166 | return 0; |
| 167 | } |
| 168 | |
| 169 | static void cx23885_stop_streaming(struct vb2_queue *q) |
| 170 | { |
| 171 | struct cx23885_tsport *port = q->drv_priv; |
| 172 | |
| 173 | cx23885_cancel_buffers(port); |
| 174 | } |
| 175 | |
| 176 | static struct vb2_ops dvb_qops = { |
| 177 | .queue_setup = queue_setup, |
| 178 | .buf_prepare = buffer_prepare, |
| 179 | .buf_finish = buffer_finish, |
| 180 | .buf_queue = buffer_queue, |
| 181 | .wait_prepare = vb2_ops_wait_prepare, |
| 182 | .wait_finish = vb2_ops_wait_finish, |
| 183 | .start_streaming = cx23885_start_streaming, |
| 184 | .stop_streaming = cx23885_stop_streaming, |
| 185 | }; |
| 186 | |
| 187 | static struct s5h1409_config hauppauge_generic_config = { |
| 188 | .demod_address = 0x32 >> 1, |
| 189 | .output_mode = S5H1409_SERIAL_OUTPUT, |
| 190 | .gpio = S5H1409_GPIO_ON, |
| 191 | .qam_if = 44000, |
| 192 | .inversion = S5H1409_INVERSION_OFF, |
| 193 | .status_mode = S5H1409_DEMODLOCKING, |
| 194 | .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, |
| 195 | }; |
| 196 | |
| 197 | static struct tda10048_config hauppauge_hvr1200_config = { |
| 198 | .demod_address = 0x10 >> 1, |
| 199 | .output_mode = TDA10048_SERIAL_OUTPUT, |
| 200 | .fwbulkwritelen = TDA10048_BULKWRITE_200, |
| 201 | .inversion = TDA10048_INVERSION_ON, |
| 202 | .dtv6_if_freq_khz = TDA10048_IF_3300, |
| 203 | .dtv7_if_freq_khz = TDA10048_IF_3800, |
| 204 | .dtv8_if_freq_khz = TDA10048_IF_4300, |
| 205 | .clk_freq_khz = TDA10048_CLK_16000, |
| 206 | }; |
| 207 | |
| 208 | static struct tda10048_config hauppauge_hvr1210_config = { |
| 209 | .demod_address = 0x10 >> 1, |
| 210 | .output_mode = TDA10048_SERIAL_OUTPUT, |
| 211 | .fwbulkwritelen = TDA10048_BULKWRITE_200, |
| 212 | .inversion = TDA10048_INVERSION_ON, |
| 213 | .dtv6_if_freq_khz = TDA10048_IF_3300, |
| 214 | .dtv7_if_freq_khz = TDA10048_IF_3500, |
| 215 | .dtv8_if_freq_khz = TDA10048_IF_4000, |
| 216 | .clk_freq_khz = TDA10048_CLK_16000, |
| 217 | }; |
| 218 | |
| 219 | static struct s5h1409_config hauppauge_ezqam_config = { |
| 220 | .demod_address = 0x32 >> 1, |
| 221 | .output_mode = S5H1409_SERIAL_OUTPUT, |
| 222 | .gpio = S5H1409_GPIO_OFF, |
| 223 | .qam_if = 4000, |
| 224 | .inversion = S5H1409_INVERSION_ON, |
| 225 | .status_mode = S5H1409_DEMODLOCKING, |
| 226 | .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, |
| 227 | }; |
| 228 | |
| 229 | static struct s5h1409_config hauppauge_hvr1800lp_config = { |
| 230 | .demod_address = 0x32 >> 1, |
| 231 | .output_mode = S5H1409_SERIAL_OUTPUT, |
| 232 | .gpio = S5H1409_GPIO_OFF, |
| 233 | .qam_if = 44000, |
| 234 | .inversion = S5H1409_INVERSION_OFF, |
| 235 | .status_mode = S5H1409_DEMODLOCKING, |
| 236 | .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, |
| 237 | }; |
| 238 | |
| 239 | static struct s5h1409_config hauppauge_hvr1500_config = { |
| 240 | .demod_address = 0x32 >> 1, |
| 241 | .output_mode = S5H1409_SERIAL_OUTPUT, |
| 242 | .gpio = S5H1409_GPIO_OFF, |
| 243 | .inversion = S5H1409_INVERSION_OFF, |
| 244 | .status_mode = S5H1409_DEMODLOCKING, |
| 245 | .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, |
| 246 | }; |
| 247 | |
| 248 | static struct mt2131_config hauppauge_generic_tunerconfig = { |
| 249 | 0x61 |
| 250 | }; |
| 251 | |
| 252 | static struct lgdt330x_config fusionhdtv_5_express = { |
| 253 | .demod_address = 0x0e, |
| 254 | .demod_chip = LGDT3303, |
| 255 | .serial_mpeg = 0x40, |
| 256 | }; |
| 257 | |
| 258 | static struct s5h1409_config hauppauge_hvr1500q_config = { |
| 259 | .demod_address = 0x32 >> 1, |
| 260 | .output_mode = S5H1409_SERIAL_OUTPUT, |
| 261 | .gpio = S5H1409_GPIO_ON, |
| 262 | .qam_if = 44000, |
| 263 | .inversion = S5H1409_INVERSION_OFF, |
| 264 | .status_mode = S5H1409_DEMODLOCKING, |
| 265 | .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, |
| 266 | }; |
| 267 | |
| 268 | static struct s5h1409_config dvico_s5h1409_config = { |
| 269 | .demod_address = 0x32 >> 1, |
| 270 | .output_mode = S5H1409_SERIAL_OUTPUT, |
| 271 | .gpio = S5H1409_GPIO_ON, |
| 272 | .qam_if = 44000, |
| 273 | .inversion = S5H1409_INVERSION_OFF, |
| 274 | .status_mode = S5H1409_DEMODLOCKING, |
| 275 | .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, |
| 276 | }; |
| 277 | |
| 278 | static struct s5h1411_config dvico_s5h1411_config = { |
| 279 | .output_mode = S5H1411_SERIAL_OUTPUT, |
| 280 | .gpio = S5H1411_GPIO_ON, |
| 281 | .qam_if = S5H1411_IF_44000, |
| 282 | .vsb_if = S5H1411_IF_44000, |
| 283 | .inversion = S5H1411_INVERSION_OFF, |
| 284 | .status_mode = S5H1411_DEMODLOCKING, |
| 285 | .mpeg_timing = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, |
| 286 | }; |
| 287 | |
| 288 | static struct s5h1411_config hcw_s5h1411_config = { |
| 289 | .output_mode = S5H1411_SERIAL_OUTPUT, |
| 290 | .gpio = S5H1411_GPIO_OFF, |
| 291 | .vsb_if = S5H1411_IF_44000, |
| 292 | .qam_if = S5H1411_IF_4000, |
| 293 | .inversion = S5H1411_INVERSION_ON, |
| 294 | .status_mode = S5H1411_DEMODLOCKING, |
| 295 | .mpeg_timing = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, |
| 296 | }; |
| 297 | |
| 298 | static struct xc5000_config hauppauge_hvr1500q_tunerconfig = { |
| 299 | .i2c_address = 0x61, |
| 300 | .if_khz = 5380, |
| 301 | }; |
| 302 | |
| 303 | static struct xc5000_config dvico_xc5000_tunerconfig = { |
| 304 | .i2c_address = 0x64, |
| 305 | .if_khz = 5380, |
| 306 | }; |
| 307 | |
| 308 | static struct tda829x_config tda829x_no_probe = { |
| 309 | .probe_tuner = TDA829X_DONT_PROBE, |
| 310 | }; |
| 311 | |
| 312 | static struct tda18271_std_map hauppauge_tda18271_std_map = { |
| 313 | .atsc_6 = { .if_freq = 5380, .agc_mode = 3, .std = 3, |
| 314 | .if_lvl = 6, .rfagc_top = 0x37 }, |
| 315 | .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 0, |
| 316 | .if_lvl = 6, .rfagc_top = 0x37 }, |
| 317 | }; |
| 318 | |
| 319 | static struct tda18271_std_map hauppauge_hvr1200_tda18271_std_map = { |
| 320 | .dvbt_6 = { .if_freq = 3300, .agc_mode = 3, .std = 4, |
| 321 | .if_lvl = 1, .rfagc_top = 0x37, }, |
| 322 | .dvbt_7 = { .if_freq = 3800, .agc_mode = 3, .std = 5, |
| 323 | .if_lvl = 1, .rfagc_top = 0x37, }, |
| 324 | .dvbt_8 = { .if_freq = 4300, .agc_mode = 3, .std = 6, |
| 325 | .if_lvl = 1, .rfagc_top = 0x37, }, |
| 326 | }; |
| 327 | |
| 328 | static struct tda18271_config hauppauge_tda18271_config = { |
| 329 | .std_map = &hauppauge_tda18271_std_map, |
| 330 | .gate = TDA18271_GATE_ANALOG, |
| 331 | .output_opt = TDA18271_OUTPUT_LT_OFF, |
| 332 | }; |
| 333 | |
| 334 | static struct tda18271_config hauppauge_hvr1200_tuner_config = { |
| 335 | .std_map = &hauppauge_hvr1200_tda18271_std_map, |
| 336 | .gate = TDA18271_GATE_ANALOG, |
| 337 | .output_opt = TDA18271_OUTPUT_LT_OFF, |
| 338 | }; |
| 339 | |
| 340 | static struct tda18271_config hauppauge_hvr1210_tuner_config = { |
| 341 | .gate = TDA18271_GATE_DIGITAL, |
| 342 | .output_opt = TDA18271_OUTPUT_LT_OFF, |
| 343 | }; |
| 344 | |
| 345 | static struct tda18271_config hauppauge_hvr4400_tuner_config = { |
| 346 | .gate = TDA18271_GATE_DIGITAL, |
| 347 | .output_opt = TDA18271_OUTPUT_LT_OFF, |
| 348 | }; |
| 349 | |
| 350 | static struct tda18271_std_map hauppauge_hvr127x_std_map = { |
| 351 | .atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 4, |
| 352 | .if_lvl = 1, .rfagc_top = 0x58 }, |
| 353 | .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 5, |
| 354 | .if_lvl = 1, .rfagc_top = 0x58 }, |
| 355 | }; |
| 356 | |
| 357 | static struct tda18271_config hauppauge_hvr127x_config = { |
| 358 | .std_map = &hauppauge_hvr127x_std_map, |
| 359 | .output_opt = TDA18271_OUTPUT_LT_OFF, |
| 360 | }; |
| 361 | |
| 362 | static struct lgdt3305_config hauppauge_lgdt3305_config = { |
| 363 | .i2c_addr = 0x0e, |
| 364 | .mpeg_mode = LGDT3305_MPEG_SERIAL, |
| 365 | .tpclk_edge = LGDT3305_TPCLK_FALLING_EDGE, |
| 366 | .tpvalid_polarity = LGDT3305_TP_VALID_HIGH, |
| 367 | .deny_i2c_rptr = 1, |
| 368 | .spectral_inversion = 1, |
| 369 | .qam_if_khz = 4000, |
| 370 | .vsb_if_khz = 3250, |
| 371 | }; |
| 372 | |
| 373 | static struct dibx000_agc_config xc3028_agc_config = { |
| 374 | BAND_VHF | BAND_UHF, /* band_caps */ |
| 375 | |
| 376 | /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=0, |
| 377 | * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, |
| 378 | * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, |
| 379 | * P_agc_nb_est=2, P_agc_write=0 |
| 380 | */ |
| 381 | (0 << 15) | (0 << 14) | (0 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | |
| 382 | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), /* setup */ |
| 383 | |
| 384 | 712, /* inv_gain */ |
| 385 | 21, /* time_stabiliz */ |
| 386 | |
| 387 | 0, /* alpha_level */ |
| 388 | 118, /* thlock */ |
| 389 | |
| 390 | 0, /* wbd_inv */ |
| 391 | 2867, /* wbd_ref */ |
| 392 | 0, /* wbd_sel */ |
| 393 | 2, /* wbd_alpha */ |
| 394 | |
| 395 | 0, /* agc1_max */ |
| 396 | 0, /* agc1_min */ |
| 397 | 39718, /* agc2_max */ |
| 398 | 9930, /* agc2_min */ |
| 399 | 0, /* agc1_pt1 */ |
| 400 | 0, /* agc1_pt2 */ |
| 401 | 0, /* agc1_pt3 */ |
| 402 | 0, /* agc1_slope1 */ |
| 403 | 0, /* agc1_slope2 */ |
| 404 | 0, /* agc2_pt1 */ |
| 405 | 128, /* agc2_pt2 */ |
| 406 | 29, /* agc2_slope1 */ |
| 407 | 29, /* agc2_slope2 */ |
| 408 | |
| 409 | 17, /* alpha_mant */ |
| 410 | 27, /* alpha_exp */ |
| 411 | 23, /* beta_mant */ |
| 412 | 51, /* beta_exp */ |
| 413 | |
| 414 | 1, /* perform_agc_softsplit */ |
| 415 | }; |
| 416 | |
| 417 | /* PLL Configuration for COFDM BW_MHz = 8.000000 |
| 418 | * With external clock = 30.000000 */ |
| 419 | static struct dibx000_bandwidth_config xc3028_bw_config = { |
| 420 | 60000, /* internal */ |
| 421 | 30000, /* sampling */ |
| 422 | 1, /* pll_cfg: prediv */ |
| 423 | 8, /* pll_cfg: ratio */ |
| 424 | 3, /* pll_cfg: range */ |
| 425 | 1, /* pll_cfg: reset */ |
| 426 | 0, /* pll_cfg: bypass */ |
| 427 | 0, /* misc: refdiv */ |
| 428 | 0, /* misc: bypclk_div */ |
| 429 | 1, /* misc: IO_CLK_en_core */ |
| 430 | 1, /* misc: ADClkSrc */ |
| 431 | 0, /* misc: modulo */ |
| 432 | (3 << 14) | (1 << 12) | (524 << 0), /* sad_cfg: refsel, sel, freq_15k */ |
| 433 | (1 << 25) | 5816102, /* ifreq = 5.200000 MHz */ |
| 434 | 20452225, /* timf */ |
| 435 | 30000000 /* xtal_hz */ |
| 436 | }; |
| 437 | |
| 438 | static struct dib7000p_config hauppauge_hvr1400_dib7000_config = { |
| 439 | .output_mpeg2_in_188_bytes = 1, |
| 440 | .hostbus_diversity = 1, |
| 441 | .tuner_is_baseband = 0, |
| 442 | .update_lna = NULL, |
| 443 | |
| 444 | .agc_config_count = 1, |
| 445 | .agc = &xc3028_agc_config, |
| 446 | .bw = &xc3028_bw_config, |
| 447 | |
| 448 | .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, |
| 449 | .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, |
| 450 | .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, |
| 451 | |
| 452 | .pwm_freq_div = 0, |
| 453 | .agc_control = NULL, |
| 454 | .spur_protect = 0, |
| 455 | |
| 456 | .output_mode = OUTMODE_MPEG2_SERIAL, |
| 457 | }; |
| 458 | |
| 459 | static struct zl10353_config dvico_fusionhdtv_xc3028 = { |
| 460 | .demod_address = 0x0f, |
| 461 | .if2 = 45600, |
| 462 | .no_tuner = 1, |
| 463 | .disable_i2c_gate_ctrl = 1, |
| 464 | }; |
| 465 | |
| 466 | static struct stv0900_reg stv0900_ts_regs[] = { |
| 467 | { R0900_TSGENERAL, 0x00 }, |
| 468 | { R0900_P1_TSSPEED, 0x40 }, |
| 469 | { R0900_P2_TSSPEED, 0x40 }, |
| 470 | { R0900_P1_TSCFGM, 0xc0 }, |
| 471 | { R0900_P2_TSCFGM, 0xc0 }, |
| 472 | { R0900_P1_TSCFGH, 0xe0 }, |
| 473 | { R0900_P2_TSCFGH, 0xe0 }, |
| 474 | { R0900_P1_TSCFGL, 0x20 }, |
| 475 | { R0900_P2_TSCFGL, 0x20 }, |
| 476 | { 0xffff, 0xff }, /* terminate */ |
| 477 | }; |
| 478 | |
| 479 | static struct stv0900_config netup_stv0900_config = { |
| 480 | .demod_address = 0x68, |
| 481 | .demod_mode = 1, /* dual */ |
| 482 | .xtal = 8000000, |
| 483 | .clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */ |
| 484 | .diseqc_mode = 2,/* 2/3 PWM */ |
| 485 | .ts_config_regs = stv0900_ts_regs, |
| 486 | .tun1_maddress = 0,/* 0x60 */ |
| 487 | .tun2_maddress = 3,/* 0x63 */ |
| 488 | .tun1_adc = 1,/* 1 Vpp */ |
| 489 | .tun2_adc = 1,/* 1 Vpp */ |
| 490 | }; |
| 491 | |
| 492 | static struct stv6110_config netup_stv6110_tunerconfig_a = { |
| 493 | .i2c_address = 0x60, |
| 494 | .mclk = 16000000, |
| 495 | .clk_div = 1, |
| 496 | .gain = 8, /* +16 dB - maximum gain */ |
| 497 | }; |
| 498 | |
| 499 | static struct stv6110_config netup_stv6110_tunerconfig_b = { |
| 500 | .i2c_address = 0x63, |
| 501 | .mclk = 16000000, |
| 502 | .clk_div = 1, |
| 503 | .gain = 8, /* +16 dB - maximum gain */ |
| 504 | }; |
| 505 | |
| 506 | static struct cx24116_config tbs_cx24116_config = { |
| 507 | .demod_address = 0x55, |
| 508 | }; |
| 509 | |
| 510 | static struct cx24117_config tbs_cx24117_config = { |
| 511 | .demod_address = 0x55, |
| 512 | }; |
| 513 | |
| 514 | static struct ds3000_config tevii_ds3000_config = { |
| 515 | .demod_address = 0x68, |
| 516 | }; |
| 517 | |
| 518 | static struct ts2020_config tevii_ts2020_config = { |
| 519 | .tuner_address = 0x60, |
| 520 | .clk_out_div = 1, |
| 521 | .frequency_div = 1146000, |
| 522 | }; |
| 523 | |
| 524 | static struct cx24116_config dvbworld_cx24116_config = { |
| 525 | .demod_address = 0x05, |
| 526 | }; |
| 527 | |
| 528 | static struct lgs8gxx_config mygica_x8506_lgs8gl5_config = { |
| 529 | .prod = LGS8GXX_PROD_LGS8GL5, |
| 530 | .demod_address = 0x19, |
| 531 | .serial_ts = 0, |
| 532 | .ts_clk_pol = 1, |
| 533 | .ts_clk_gated = 1, |
| 534 | .if_clk_freq = 30400, /* 30.4 MHz */ |
| 535 | .if_freq = 5380, /* 5.38 MHz */ |
| 536 | .if_neg_center = 1, |
| 537 | .ext_adc = 0, |
| 538 | .adc_signed = 0, |
| 539 | .if_neg_edge = 0, |
| 540 | }; |
| 541 | |
| 542 | static struct xc5000_config mygica_x8506_xc5000_config = { |
| 543 | .i2c_address = 0x61, |
| 544 | .if_khz = 5380, |
| 545 | }; |
| 546 | |
| 547 | static struct mb86a20s_config mygica_x8507_mb86a20s_config = { |
| 548 | .demod_address = 0x10, |
| 549 | }; |
| 550 | |
| 551 | static struct xc5000_config mygica_x8507_xc5000_config = { |
| 552 | .i2c_address = 0x61, |
| 553 | .if_khz = 4000, |
| 554 | }; |
| 555 | |
| 556 | static struct stv090x_config prof_8000_stv090x_config = { |
| 557 | .device = STV0903, |
| 558 | .demod_mode = STV090x_SINGLE, |
| 559 | .clk_mode = STV090x_CLK_EXT, |
| 560 | .xtal = 27000000, |
| 561 | .address = 0x6A, |
| 562 | .ts1_mode = STV090x_TSMODE_PARALLEL_PUNCTURED, |
| 563 | .repeater_level = STV090x_RPTLEVEL_64, |
| 564 | .adc1_range = STV090x_ADC_2Vpp, |
| 565 | .diseqc_envelope_mode = false, |
| 566 | |
| 567 | .tuner_get_frequency = stb6100_get_frequency, |
| 568 | .tuner_set_frequency = stb6100_set_frequency, |
| 569 | .tuner_set_bandwidth = stb6100_set_bandwidth, |
| 570 | .tuner_get_bandwidth = stb6100_get_bandwidth, |
| 571 | }; |
| 572 | |
| 573 | static struct stb6100_config prof_8000_stb6100_config = { |
| 574 | .tuner_address = 0x60, |
| 575 | .refclock = 27000000, |
| 576 | }; |
| 577 | |
| 578 | static int p8000_set_voltage(struct dvb_frontend *fe, |
| 579 | enum fe_sec_voltage voltage) |
| 580 | { |
| 581 | struct cx23885_tsport *port = fe->dvb->priv; |
| 582 | struct cx23885_dev *dev = port->dev; |
| 583 | |
| 584 | if (voltage == SEC_VOLTAGE_18) |
| 585 | cx_write(MC417_RWD, 0x00001e00); |
| 586 | else if (voltage == SEC_VOLTAGE_13) |
| 587 | cx_write(MC417_RWD, 0x00001a00); |
| 588 | else |
| 589 | cx_write(MC417_RWD, 0x00001800); |
| 590 | return 0; |
| 591 | } |
| 592 | |
| 593 | static int dvbsky_t9580_set_voltage(struct dvb_frontend *fe, |
| 594 | enum fe_sec_voltage voltage) |
| 595 | { |
| 596 | struct cx23885_tsport *port = fe->dvb->priv; |
| 597 | struct cx23885_dev *dev = port->dev; |
| 598 | |
| 599 | cx23885_gpio_enable(dev, GPIO_0 | GPIO_1, 1); |
| 600 | |
| 601 | switch (voltage) { |
| 602 | case SEC_VOLTAGE_13: |
| 603 | cx23885_gpio_set(dev, GPIO_1); |
| 604 | cx23885_gpio_clear(dev, GPIO_0); |
| 605 | break; |
| 606 | case SEC_VOLTAGE_18: |
| 607 | cx23885_gpio_set(dev, GPIO_1); |
| 608 | cx23885_gpio_set(dev, GPIO_0); |
| 609 | break; |
| 610 | case SEC_VOLTAGE_OFF: |
| 611 | cx23885_gpio_clear(dev, GPIO_1); |
| 612 | cx23885_gpio_clear(dev, GPIO_0); |
| 613 | break; |
| 614 | } |
| 615 | |
| 616 | /* call the frontend set_voltage function */ |
| 617 | port->fe_set_voltage(fe, voltage); |
| 618 | |
| 619 | return 0; |
| 620 | } |
| 621 | |
| 622 | static int dvbsky_s952_portc_set_voltage(struct dvb_frontend *fe, |
| 623 | enum fe_sec_voltage voltage) |
| 624 | { |
| 625 | struct cx23885_tsport *port = fe->dvb->priv; |
| 626 | struct cx23885_dev *dev = port->dev; |
| 627 | |
| 628 | cx23885_gpio_enable(dev, GPIO_12 | GPIO_13, 1); |
| 629 | |
| 630 | switch (voltage) { |
| 631 | case SEC_VOLTAGE_13: |
| 632 | cx23885_gpio_set(dev, GPIO_13); |
| 633 | cx23885_gpio_clear(dev, GPIO_12); |
| 634 | break; |
| 635 | case SEC_VOLTAGE_18: |
| 636 | cx23885_gpio_set(dev, GPIO_13); |
| 637 | cx23885_gpio_set(dev, GPIO_12); |
| 638 | break; |
| 639 | case SEC_VOLTAGE_OFF: |
| 640 | cx23885_gpio_clear(dev, GPIO_13); |
| 641 | cx23885_gpio_clear(dev, GPIO_12); |
| 642 | break; |
| 643 | } |
| 644 | /* call the frontend set_voltage function */ |
| 645 | return port->fe_set_voltage(fe, voltage); |
| 646 | } |
| 647 | |
| 648 | static int cx23885_sp2_ci_ctrl(void *priv, u8 read, int addr, |
| 649 | u8 data, int *mem) |
| 650 | { |
| 651 | /* MC417 */ |
| 652 | #define SP2_DATA 0x000000ff |
| 653 | #define SP2_WR 0x00008000 |
| 654 | #define SP2_RD 0x00004000 |
| 655 | #define SP2_ACK 0x00001000 |
| 656 | #define SP2_ADHI 0x00000800 |
| 657 | #define SP2_ADLO 0x00000400 |
| 658 | #define SP2_CS1 0x00000200 |
| 659 | #define SP2_CS0 0x00000100 |
| 660 | #define SP2_EN_ALL 0x00001000 |
| 661 | #define SP2_CTRL_OFF (SP2_CS1 | SP2_CS0 | SP2_WR | SP2_RD) |
| 662 | |
| 663 | struct cx23885_tsport *port = priv; |
| 664 | struct cx23885_dev *dev = port->dev; |
| 665 | int ret; |
| 666 | int tmp = 0; |
| 667 | unsigned long timeout; |
| 668 | |
| 669 | mutex_lock(&dev->gpio_lock); |
| 670 | |
| 671 | /* write addr */ |
| 672 | cx_write(MC417_OEN, SP2_EN_ALL); |
| 673 | cx_write(MC417_RWD, SP2_CTRL_OFF | |
| 674 | SP2_ADLO | (0xff & addr)); |
| 675 | cx_clear(MC417_RWD, SP2_ADLO); |
| 676 | cx_write(MC417_RWD, SP2_CTRL_OFF | |
| 677 | SP2_ADHI | (0xff & (addr >> 8))); |
| 678 | cx_clear(MC417_RWD, SP2_ADHI); |
| 679 | |
| 680 | if (read) |
| 681 | /* data in */ |
| 682 | cx_write(MC417_OEN, SP2_EN_ALL | SP2_DATA); |
| 683 | else |
| 684 | /* data out */ |
| 685 | cx_write(MC417_RWD, SP2_CTRL_OFF | data); |
| 686 | |
| 687 | /* chip select 0 */ |
| 688 | cx_clear(MC417_RWD, SP2_CS0); |
| 689 | |
| 690 | /* read/write */ |
| 691 | cx_clear(MC417_RWD, (read) ? SP2_RD : SP2_WR); |
| 692 | |
| 693 | /* wait for a maximum of 1 msec */ |
| 694 | timeout = jiffies + msecs_to_jiffies(1); |
| 695 | while (!time_after(jiffies, timeout)) { |
| 696 | tmp = cx_read(MC417_RWD); |
| 697 | if ((tmp & SP2_ACK) == 0) |
| 698 | break; |
| 699 | usleep_range(50, 100); |
| 700 | } |
| 701 | |
| 702 | cx_set(MC417_RWD, SP2_CTRL_OFF); |
| 703 | *mem = tmp & 0xff; |
| 704 | |
| 705 | mutex_unlock(&dev->gpio_lock); |
| 706 | |
| 707 | if (!read) { |
| 708 | if (*mem < 0) { |
| 709 | ret = -EREMOTEIO; |
| 710 | goto err; |
| 711 | } |
| 712 | } |
| 713 | |
| 714 | return 0; |
| 715 | err: |
| 716 | return ret; |
| 717 | } |
| 718 | |
| 719 | static int cx23885_dvb_set_frontend(struct dvb_frontend *fe) |
| 720 | { |
| 721 | struct dtv_frontend_properties *p = &fe->dtv_property_cache; |
| 722 | struct cx23885_tsport *port = fe->dvb->priv; |
| 723 | struct cx23885_dev *dev = port->dev; |
| 724 | |
| 725 | switch (dev->board) { |
| 726 | case CX23885_BOARD_HAUPPAUGE_HVR1275: |
| 727 | switch (p->modulation) { |
| 728 | case VSB_8: |
| 729 | cx23885_gpio_clear(dev, GPIO_5); |
| 730 | break; |
| 731 | case QAM_64: |
| 732 | case QAM_256: |
| 733 | default: |
| 734 | cx23885_gpio_set(dev, GPIO_5); |
| 735 | break; |
| 736 | } |
| 737 | break; |
| 738 | case CX23885_BOARD_MYGICA_X8506: |
| 739 | case CX23885_BOARD_MYGICA_X8507: |
| 740 | case CX23885_BOARD_MAGICPRO_PROHDTVE2: |
| 741 | /* Select Digital TV */ |
| 742 | cx23885_gpio_set(dev, GPIO_0); |
| 743 | break; |
| 744 | } |
| 745 | |
| 746 | /* Call the real set_frontend */ |
| 747 | if (port->set_frontend) |
| 748 | return port->set_frontend(fe); |
| 749 | |
| 750 | return 0; |
| 751 | } |
| 752 | |
| 753 | static void cx23885_set_frontend_hook(struct cx23885_tsport *port, |
| 754 | struct dvb_frontend *fe) |
| 755 | { |
| 756 | port->set_frontend = fe->ops.set_frontend; |
| 757 | fe->ops.set_frontend = cx23885_dvb_set_frontend; |
| 758 | } |
| 759 | |
| 760 | static struct lgs8gxx_config magicpro_prohdtve2_lgs8g75_config = { |
| 761 | .prod = LGS8GXX_PROD_LGS8G75, |
| 762 | .demod_address = 0x19, |
| 763 | .serial_ts = 0, |
| 764 | .ts_clk_pol = 1, |
| 765 | .ts_clk_gated = 1, |
| 766 | .if_clk_freq = 30400, /* 30.4 MHz */ |
| 767 | .if_freq = 6500, /* 6.50 MHz */ |
| 768 | .if_neg_center = 1, |
| 769 | .ext_adc = 0, |
| 770 | .adc_signed = 1, |
| 771 | .adc_vpp = 2, /* 1.6 Vpp */ |
| 772 | .if_neg_edge = 1, |
| 773 | }; |
| 774 | |
| 775 | static struct xc5000_config magicpro_prohdtve2_xc5000_config = { |
| 776 | .i2c_address = 0x61, |
| 777 | .if_khz = 6500, |
| 778 | }; |
| 779 | |
| 780 | static struct atbm8830_config mygica_x8558pro_atbm8830_cfg1 = { |
| 781 | .prod = ATBM8830_PROD_8830, |
| 782 | .demod_address = 0x44, |
| 783 | .serial_ts = 0, |
| 784 | .ts_sampling_edge = 1, |
| 785 | .ts_clk_gated = 0, |
| 786 | .osc_clk_freq = 30400, /* in kHz */ |
| 787 | .if_freq = 0, /* zero IF */ |
| 788 | .zif_swap_iq = 1, |
| 789 | .agc_min = 0x2E, |
| 790 | .agc_max = 0xFF, |
| 791 | .agc_hold_loop = 0, |
| 792 | }; |
| 793 | |
| 794 | static struct max2165_config mygic_x8558pro_max2165_cfg1 = { |
| 795 | .i2c_address = 0x60, |
| 796 | .osc_clk = 20 |
| 797 | }; |
| 798 | |
| 799 | static struct atbm8830_config mygica_x8558pro_atbm8830_cfg2 = { |
| 800 | .prod = ATBM8830_PROD_8830, |
| 801 | .demod_address = 0x44, |
| 802 | .serial_ts = 1, |
| 803 | .ts_sampling_edge = 1, |
| 804 | .ts_clk_gated = 0, |
| 805 | .osc_clk_freq = 30400, /* in kHz */ |
| 806 | .if_freq = 0, /* zero IF */ |
| 807 | .zif_swap_iq = 1, |
| 808 | .agc_min = 0x2E, |
| 809 | .agc_max = 0xFF, |
| 810 | .agc_hold_loop = 0, |
| 811 | }; |
| 812 | |
| 813 | static struct max2165_config mygic_x8558pro_max2165_cfg2 = { |
| 814 | .i2c_address = 0x60, |
| 815 | .osc_clk = 20 |
| 816 | }; |
| 817 | static struct stv0367_config netup_stv0367_config[] = { |
| 818 | { |
| 819 | .demod_address = 0x1c, |
| 820 | .xtal = 27000000, |
| 821 | .if_khz = 4500, |
| 822 | .if_iq_mode = 0, |
| 823 | .ts_mode = 1, |
| 824 | .clk_pol = 0, |
| 825 | }, { |
| 826 | .demod_address = 0x1d, |
| 827 | .xtal = 27000000, |
| 828 | .if_khz = 4500, |
| 829 | .if_iq_mode = 0, |
| 830 | .ts_mode = 1, |
| 831 | .clk_pol = 0, |
| 832 | }, |
| 833 | }; |
| 834 | |
| 835 | static struct xc5000_config netup_xc5000_config[] = { |
| 836 | { |
| 837 | .i2c_address = 0x61, |
| 838 | .if_khz = 4500, |
| 839 | }, { |
| 840 | .i2c_address = 0x64, |
| 841 | .if_khz = 4500, |
| 842 | }, |
| 843 | }; |
| 844 | |
| 845 | static struct drxk_config terratec_drxk_config[] = { |
| 846 | { |
| 847 | .adr = 0x29, |
| 848 | .no_i2c_bridge = 1, |
| 849 | }, { |
| 850 | .adr = 0x2a, |
| 851 | .no_i2c_bridge = 1, |
| 852 | }, |
| 853 | }; |
| 854 | |
| 855 | static struct mt2063_config terratec_mt2063_config[] = { |
| 856 | { |
| 857 | .tuner_address = 0x60, |
| 858 | }, { |
| 859 | .tuner_address = 0x67, |
| 860 | }, |
| 861 | }; |
| 862 | |
| 863 | static const struct tda10071_platform_data hauppauge_tda10071_pdata = { |
| 864 | .clk = 40444000, /* 40.444 MHz */ |
| 865 | .i2c_wr_max = 64, |
| 866 | .ts_mode = TDA10071_TS_SERIAL, |
| 867 | .pll_multiplier = 20, |
| 868 | .tuner_i2c_addr = 0x54, |
| 869 | }; |
| 870 | |
| 871 | static const struct si2165_config hauppauge_hvr4400_si2165_config = { |
| 872 | .i2c_addr = 0x64, |
| 873 | .chip_mode = SI2165_MODE_PLL_XTAL, |
| 874 | .ref_freq_Hz = 16000000, |
| 875 | }; |
| 876 | |
| 877 | static const struct m88ds3103_config dvbsky_t9580_m88ds3103_config = { |
| 878 | .i2c_addr = 0x68, |
| 879 | .clock = 27000000, |
| 880 | .i2c_wr_max = 33, |
| 881 | .clock_out = 0, |
| 882 | .ts_mode = M88DS3103_TS_PARALLEL, |
| 883 | .ts_clk = 16000, |
| 884 | .ts_clk_pol = 1, |
| 885 | .lnb_en_pol = 1, |
| 886 | .lnb_hv_pol = 0, |
| 887 | .agc = 0x99, |
| 888 | }; |
| 889 | |
| 890 | static const struct m88ds3103_config dvbsky_s950c_m88ds3103_config = { |
| 891 | .i2c_addr = 0x68, |
| 892 | .clock = 27000000, |
| 893 | .i2c_wr_max = 33, |
| 894 | .clock_out = 0, |
| 895 | .ts_mode = M88DS3103_TS_CI, |
| 896 | .ts_clk = 10000, |
| 897 | .ts_clk_pol = 1, |
| 898 | .lnb_en_pol = 1, |
| 899 | .lnb_hv_pol = 0, |
| 900 | .agc = 0x99, |
| 901 | }; |
| 902 | |
| 903 | static const struct m88ds3103_config dvbsky_s952_portc_m88ds3103_config = { |
| 904 | .i2c_addr = 0x68, |
| 905 | .clock = 27000000, |
| 906 | .i2c_wr_max = 33, |
| 907 | .clock_out = 0, |
| 908 | .ts_mode = M88DS3103_TS_SERIAL, |
| 909 | .ts_clk = 96000, |
| 910 | .ts_clk_pol = 0, |
| 911 | .lnb_en_pol = 1, |
| 912 | .lnb_hv_pol = 0, |
| 913 | .agc = 0x99, |
| 914 | }; |
| 915 | |
| 916 | static const struct m88ds3103_config hauppauge_hvr5525_m88ds3103_config = { |
| 917 | .i2c_addr = 0x69, |
| 918 | .clock = 27000000, |
| 919 | .i2c_wr_max = 33, |
| 920 | .ts_mode = M88DS3103_TS_PARALLEL, |
| 921 | .ts_clk = 16000, |
| 922 | .ts_clk_pol = 1, |
| 923 | .agc = 0x99, |
| 924 | }; |
| 925 | |
| 926 | static int netup_altera_fpga_rw(void *device, int flag, int data, int read) |
| 927 | { |
| 928 | struct cx23885_dev *dev = (struct cx23885_dev *)device; |
| 929 | unsigned long timeout = jiffies + msecs_to_jiffies(1); |
| 930 | uint32_t mem = 0; |
| 931 | |
| 932 | mem = cx_read(MC417_RWD); |
| 933 | if (read) |
| 934 | cx_set(MC417_OEN, ALT_DATA); |
| 935 | else { |
| 936 | cx_clear(MC417_OEN, ALT_DATA);/* D0-D7 out */ |
| 937 | mem &= ~ALT_DATA; |
| 938 | mem |= (data & ALT_DATA); |
| 939 | } |
| 940 | |
| 941 | if (flag) |
| 942 | mem |= ALT_AD_RG; |
| 943 | else |
| 944 | mem &= ~ALT_AD_RG; |
| 945 | |
| 946 | mem &= ~ALT_CS; |
| 947 | if (read) |
| 948 | mem = (mem & ~ALT_RD) | ALT_WR; |
| 949 | else |
| 950 | mem = (mem & ~ALT_WR) | ALT_RD; |
| 951 | |
| 952 | cx_write(MC417_RWD, mem); /* start RW cycle */ |
| 953 | |
| 954 | for (;;) { |
| 955 | mem = cx_read(MC417_RWD); |
| 956 | if ((mem & ALT_RDY) == 0) |
| 957 | break; |
| 958 | if (time_after(jiffies, timeout)) |
| 959 | break; |
| 960 | udelay(1); |
| 961 | } |
| 962 | |
| 963 | cx_set(MC417_RWD, ALT_RD | ALT_WR | ALT_CS); |
| 964 | if (read) |
| 965 | return mem & ALT_DATA; |
| 966 | |
| 967 | return 0; |
| 968 | }; |
| 969 | |
| 970 | static int dib7070_tuner_reset(struct dvb_frontend *fe, int onoff) |
| 971 | { |
| 972 | struct dib7000p_ops *dib7000p_ops = fe->sec_priv; |
| 973 | |
| 974 | return dib7000p_ops->set_gpio(fe, 8, 0, !onoff); |
| 975 | } |
| 976 | |
| 977 | static int dib7070_tuner_sleep(struct dvb_frontend *fe, int onoff) |
| 978 | { |
| 979 | return 0; |
| 980 | } |
| 981 | |
| 982 | static struct dib0070_config dib7070p_dib0070_config = { |
| 983 | .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS, |
| 984 | .reset = dib7070_tuner_reset, |
| 985 | .sleep = dib7070_tuner_sleep, |
| 986 | .clock_khz = 12000, |
| 987 | .freq_offset_khz_vhf = 550, |
| 988 | /* .flip_chip = 1, */ |
| 989 | }; |
| 990 | |
| 991 | /* DIB7070 generic */ |
| 992 | static struct dibx000_agc_config dib7070_agc_config = { |
| 993 | .band_caps = BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND, |
| 994 | |
| 995 | /* |
| 996 | * P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, |
| 997 | * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0, |
| 998 | * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 |
| 999 | */ |
| 1000 | .setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | |
| 1001 | (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0), |
| 1002 | .inv_gain = 600, |
| 1003 | .time_stabiliz = 10, |
| 1004 | .alpha_level = 0, |
| 1005 | .thlock = 118, |
| 1006 | .wbd_inv = 0, |
| 1007 | .wbd_ref = 3530, |
| 1008 | .wbd_sel = 1, |
| 1009 | .wbd_alpha = 5, |
| 1010 | .agc1_max = 65535, |
| 1011 | .agc1_min = 0, |
| 1012 | .agc2_max = 65535, |
| 1013 | .agc2_min = 0, |
| 1014 | .agc1_pt1 = 0, |
| 1015 | .agc1_pt2 = 40, |
| 1016 | .agc1_pt3 = 183, |
| 1017 | .agc1_slope1 = 206, |
| 1018 | .agc1_slope2 = 255, |
| 1019 | .agc2_pt1 = 72, |
| 1020 | .agc2_pt2 = 152, |
| 1021 | .agc2_slope1 = 88, |
| 1022 | .agc2_slope2 = 90, |
| 1023 | .alpha_mant = 17, |
| 1024 | .alpha_exp = 27, |
| 1025 | .beta_mant = 23, |
| 1026 | .beta_exp = 51, |
| 1027 | .perform_agc_softsplit = 0, |
| 1028 | }; |
| 1029 | |
| 1030 | static struct dibx000_bandwidth_config dib7070_bw_config_12_mhz = { |
| 1031 | .internal = 60000, |
| 1032 | .sampling = 15000, |
| 1033 | .pll_prediv = 1, |
| 1034 | .pll_ratio = 20, |
| 1035 | .pll_range = 3, |
| 1036 | .pll_reset = 1, |
| 1037 | .pll_bypass = 0, |
| 1038 | .enable_refdiv = 0, |
| 1039 | .bypclk_div = 0, |
| 1040 | .IO_CLK_en_core = 1, |
| 1041 | .ADClkSrc = 1, |
| 1042 | .modulo = 2, |
| 1043 | /* refsel, sel, freq_15k */ |
| 1044 | .sad_cfg = (3 << 14) | (1 << 12) | (524 << 0), |
| 1045 | .ifreq = (0 << 25) | 0, |
| 1046 | .timf = 20452225, |
| 1047 | .xtal_hz = 12000000, |
| 1048 | }; |
| 1049 | |
| 1050 | static struct dib7000p_config dib7070p_dib7000p_config = { |
| 1051 | /* .output_mode = OUTMODE_MPEG2_FIFO, */ |
| 1052 | .output_mode = OUTMODE_MPEG2_SERIAL, |
| 1053 | /* .output_mode = OUTMODE_MPEG2_PAR_GATED_CLK, */ |
| 1054 | .output_mpeg2_in_188_bytes = 1, |
| 1055 | |
| 1056 | .agc_config_count = 1, |
| 1057 | .agc = &dib7070_agc_config, |
| 1058 | .bw = &dib7070_bw_config_12_mhz, |
| 1059 | .tuner_is_baseband = 1, |
| 1060 | .spur_protect = 1, |
| 1061 | |
| 1062 | .gpio_dir = 0xfcef, /* DIB7000P_GPIO_DEFAULT_DIRECTIONS, */ |
| 1063 | .gpio_val = 0x0110, /* DIB7000P_GPIO_DEFAULT_VALUES, */ |
| 1064 | .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, |
| 1065 | |
| 1066 | .hostbus_diversity = 1, |
| 1067 | }; |
| 1068 | |
| 1069 | static int dvb_register_ci_mac(struct cx23885_tsport *port) |
| 1070 | { |
| 1071 | struct cx23885_dev *dev = port->dev; |
| 1072 | struct i2c_client *client_ci = NULL; |
| 1073 | struct vb2_dvb_frontend *fe0; |
| 1074 | |
| 1075 | fe0 = vb2_dvb_get_frontend(&port->frontends, 1); |
| 1076 | if (!fe0) |
| 1077 | return -EINVAL; |
| 1078 | |
| 1079 | switch (dev->board) { |
| 1080 | case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: { |
| 1081 | static struct netup_card_info cinfo; |
| 1082 | |
| 1083 | netup_get_card_info(&dev->i2c_bus[0].i2c_adap, &cinfo); |
| 1084 | memcpy(port->frontends.adapter.proposed_mac, |
| 1085 | cinfo.port[port->nr - 1].mac, 6); |
| 1086 | printk(KERN_INFO "NetUP Dual DVB-S2 CI card port%d MAC=%pM\n", |
| 1087 | port->nr, port->frontends.adapter.proposed_mac); |
| 1088 | |
| 1089 | netup_ci_init(port); |
| 1090 | return 0; |
| 1091 | } |
| 1092 | case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: { |
| 1093 | struct altera_ci_config netup_ci_cfg = { |
| 1094 | .dev = dev,/* magic number to identify*/ |
| 1095 | .adapter = &port->frontends.adapter,/* for CI */ |
| 1096 | .demux = &fe0->dvb.demux,/* for hw pid filter */ |
| 1097 | .fpga_rw = netup_altera_fpga_rw, |
| 1098 | }; |
| 1099 | |
| 1100 | altera_ci_init(&netup_ci_cfg, port->nr); |
| 1101 | return 0; |
| 1102 | } |
| 1103 | case CX23885_BOARD_TEVII_S470: { |
| 1104 | u8 eeprom[256]; /* 24C02 i2c eeprom */ |
| 1105 | |
| 1106 | if (port->nr != 1) |
| 1107 | return 0; |
| 1108 | |
| 1109 | /* Read entire EEPROM */ |
| 1110 | dev->i2c_bus[0].i2c_client.addr = 0xa0 >> 1; |
| 1111 | tveeprom_read(&dev->i2c_bus[0].i2c_client, eeprom, sizeof(eeprom)); |
| 1112 | printk(KERN_INFO "TeVii S470 MAC= %pM\n", eeprom + 0xa0); |
| 1113 | memcpy(port->frontends.adapter.proposed_mac, eeprom + 0xa0, 6); |
| 1114 | return 0; |
| 1115 | } |
| 1116 | case CX23885_BOARD_DVBSKY_T9580: |
| 1117 | case CX23885_BOARD_DVBSKY_S950: |
| 1118 | case CX23885_BOARD_DVBSKY_S952: |
| 1119 | case CX23885_BOARD_DVBSKY_T982: { |
| 1120 | u8 eeprom[256]; /* 24C02 i2c eeprom */ |
| 1121 | |
| 1122 | if (port->nr > 2) |
| 1123 | return 0; |
| 1124 | |
| 1125 | /* Read entire EEPROM */ |
| 1126 | dev->i2c_bus[0].i2c_client.addr = 0xa0 >> 1; |
| 1127 | tveeprom_read(&dev->i2c_bus[0].i2c_client, eeprom, |
| 1128 | sizeof(eeprom)); |
| 1129 | printk(KERN_INFO "%s port %d MAC address: %pM\n", |
| 1130 | cx23885_boards[dev->board].name, port->nr, |
| 1131 | eeprom + 0xc0 + (port->nr-1) * 8); |
| 1132 | memcpy(port->frontends.adapter.proposed_mac, eeprom + 0xc0 + |
| 1133 | (port->nr-1) * 8, 6); |
| 1134 | return 0; |
| 1135 | } |
| 1136 | case CX23885_BOARD_DVBSKY_S950C: |
| 1137 | case CX23885_BOARD_DVBSKY_T980C: |
| 1138 | case CX23885_BOARD_TT_CT2_4500_CI: { |
| 1139 | u8 eeprom[256]; /* 24C02 i2c eeprom */ |
| 1140 | struct sp2_config sp2_config; |
| 1141 | struct i2c_board_info info; |
| 1142 | struct cx23885_i2c *i2c_bus = &dev->i2c_bus[0]; |
| 1143 | |
| 1144 | /* attach CI */ |
| 1145 | memset(&sp2_config, 0, sizeof(sp2_config)); |
| 1146 | sp2_config.dvb_adap = &port->frontends.adapter; |
| 1147 | sp2_config.priv = port; |
| 1148 | sp2_config.ci_control = cx23885_sp2_ci_ctrl; |
| 1149 | memset(&info, 0, sizeof(struct i2c_board_info)); |
| 1150 | strlcpy(info.type, "sp2", I2C_NAME_SIZE); |
| 1151 | info.addr = 0x40; |
| 1152 | info.platform_data = &sp2_config; |
| 1153 | request_module(info.type); |
| 1154 | client_ci = i2c_new_device(&i2c_bus->i2c_adap, &info); |
| 1155 | if (client_ci == NULL || client_ci->dev.driver == NULL) |
| 1156 | return -ENODEV; |
| 1157 | if (!try_module_get(client_ci->dev.driver->owner)) { |
| 1158 | i2c_unregister_device(client_ci); |
| 1159 | return -ENODEV; |
| 1160 | } |
| 1161 | port->i2c_client_ci = client_ci; |
| 1162 | |
| 1163 | if (port->nr != 1) |
| 1164 | return 0; |
| 1165 | |
| 1166 | /* Read entire EEPROM */ |
| 1167 | dev->i2c_bus[0].i2c_client.addr = 0xa0 >> 1; |
| 1168 | tveeprom_read(&dev->i2c_bus[0].i2c_client, eeprom, |
| 1169 | sizeof(eeprom)); |
| 1170 | printk(KERN_INFO "%s MAC address: %pM\n", |
| 1171 | cx23885_boards[dev->board].name, eeprom + 0xc0); |
| 1172 | memcpy(port->frontends.adapter.proposed_mac, eeprom + 0xc0, 6); |
| 1173 | return 0; |
| 1174 | } |
| 1175 | } |
| 1176 | return 0; |
| 1177 | } |
| 1178 | |
| 1179 | static int dvb_register(struct cx23885_tsport *port) |
| 1180 | { |
| 1181 | struct dib7000p_ops dib7000p_ops; |
| 1182 | struct cx23885_dev *dev = port->dev; |
| 1183 | struct cx23885_i2c *i2c_bus = NULL, *i2c_bus2 = NULL; |
| 1184 | struct vb2_dvb_frontend *fe0, *fe1 = NULL; |
| 1185 | struct si2168_config si2168_config; |
| 1186 | struct si2157_config si2157_config; |
| 1187 | struct ts2020_config ts2020_config; |
| 1188 | struct i2c_board_info info; |
| 1189 | struct i2c_adapter *adapter; |
| 1190 | struct i2c_client *client_demod = NULL, *client_tuner = NULL; |
| 1191 | struct i2c_client *client_sec = NULL; |
| 1192 | const struct m88ds3103_config *p_m88ds3103_config = NULL; |
| 1193 | int (*p_set_voltage)(struct dvb_frontend *fe, |
| 1194 | enum fe_sec_voltage voltage) = NULL; |
| 1195 | int mfe_shared = 0; /* bus not shared by default */ |
| 1196 | int ret; |
| 1197 | |
| 1198 | /* Get the first frontend */ |
| 1199 | fe0 = vb2_dvb_get_frontend(&port->frontends, 1); |
| 1200 | if (!fe0) |
| 1201 | return -EINVAL; |
| 1202 | |
| 1203 | /* init struct vb2_dvb */ |
| 1204 | fe0->dvb.name = dev->name; |
| 1205 | |
| 1206 | /* multi-frontend gate control is undefined or defaults to fe0 */ |
| 1207 | port->frontends.gate = 0; |
| 1208 | |
| 1209 | /* Sets the gate control callback to be used by i2c command calls */ |
| 1210 | port->gate_ctrl = cx23885_dvb_gate_ctrl; |
| 1211 | |
| 1212 | /* init frontend */ |
| 1213 | switch (dev->board) { |
| 1214 | case CX23885_BOARD_HAUPPAUGE_HVR1250: |
| 1215 | i2c_bus = &dev->i2c_bus[0]; |
| 1216 | fe0->dvb.frontend = dvb_attach(s5h1409_attach, |
| 1217 | &hauppauge_generic_config, |
| 1218 | &i2c_bus->i2c_adap); |
| 1219 | if (fe0->dvb.frontend == NULL) |
| 1220 | break; |
| 1221 | dvb_attach(mt2131_attach, fe0->dvb.frontend, |
| 1222 | &i2c_bus->i2c_adap, |
| 1223 | &hauppauge_generic_tunerconfig, 0); |
| 1224 | break; |
| 1225 | case CX23885_BOARD_HAUPPAUGE_HVR1270: |
| 1226 | case CX23885_BOARD_HAUPPAUGE_HVR1275: |
| 1227 | i2c_bus = &dev->i2c_bus[0]; |
| 1228 | fe0->dvb.frontend = dvb_attach(lgdt3305_attach, |
| 1229 | &hauppauge_lgdt3305_config, |
| 1230 | &i2c_bus->i2c_adap); |
| 1231 | if (fe0->dvb.frontend == NULL) |
| 1232 | break; |
| 1233 | dvb_attach(tda18271_attach, fe0->dvb.frontend, |
| 1234 | 0x60, &dev->i2c_bus[1].i2c_adap, |
| 1235 | &hauppauge_hvr127x_config); |
| 1236 | if (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1275) |
| 1237 | cx23885_set_frontend_hook(port, fe0->dvb.frontend); |
| 1238 | break; |
| 1239 | case CX23885_BOARD_HAUPPAUGE_HVR1255: |
| 1240 | case CX23885_BOARD_HAUPPAUGE_HVR1255_22111: |
| 1241 | i2c_bus = &dev->i2c_bus[0]; |
| 1242 | fe0->dvb.frontend = dvb_attach(s5h1411_attach, |
| 1243 | &hcw_s5h1411_config, |
| 1244 | &i2c_bus->i2c_adap); |
| 1245 | if (fe0->dvb.frontend == NULL) |
| 1246 | break; |
| 1247 | |
| 1248 | dvb_attach(tda18271_attach, fe0->dvb.frontend, |
| 1249 | 0x60, &dev->i2c_bus[1].i2c_adap, |
| 1250 | &hauppauge_tda18271_config); |
| 1251 | |
| 1252 | tda18271_attach(&dev->ts1.analog_fe, |
| 1253 | 0x60, &dev->i2c_bus[1].i2c_adap, |
| 1254 | &hauppauge_tda18271_config); |
| 1255 | |
| 1256 | break; |
| 1257 | case CX23885_BOARD_HAUPPAUGE_HVR1800: |
| 1258 | i2c_bus = &dev->i2c_bus[0]; |
| 1259 | switch (alt_tuner) { |
| 1260 | case 1: |
| 1261 | fe0->dvb.frontend = |
| 1262 | dvb_attach(s5h1409_attach, |
| 1263 | &hauppauge_ezqam_config, |
| 1264 | &i2c_bus->i2c_adap); |
| 1265 | if (fe0->dvb.frontend == NULL) |
| 1266 | break; |
| 1267 | |
| 1268 | dvb_attach(tda829x_attach, fe0->dvb.frontend, |
| 1269 | &dev->i2c_bus[1].i2c_adap, 0x42, |
| 1270 | &tda829x_no_probe); |
| 1271 | dvb_attach(tda18271_attach, fe0->dvb.frontend, |
| 1272 | 0x60, &dev->i2c_bus[1].i2c_adap, |
| 1273 | &hauppauge_tda18271_config); |
| 1274 | break; |
| 1275 | case 0: |
| 1276 | default: |
| 1277 | fe0->dvb.frontend = |
| 1278 | dvb_attach(s5h1409_attach, |
| 1279 | &hauppauge_generic_config, |
| 1280 | &i2c_bus->i2c_adap); |
| 1281 | if (fe0->dvb.frontend == NULL) |
| 1282 | break; |
| 1283 | dvb_attach(mt2131_attach, fe0->dvb.frontend, |
| 1284 | &i2c_bus->i2c_adap, |
| 1285 | &hauppauge_generic_tunerconfig, 0); |
| 1286 | } |
| 1287 | break; |
| 1288 | case CX23885_BOARD_HAUPPAUGE_HVR1800lp: |
| 1289 | i2c_bus = &dev->i2c_bus[0]; |
| 1290 | fe0->dvb.frontend = dvb_attach(s5h1409_attach, |
| 1291 | &hauppauge_hvr1800lp_config, |
| 1292 | &i2c_bus->i2c_adap); |
| 1293 | if (fe0->dvb.frontend == NULL) |
| 1294 | break; |
| 1295 | dvb_attach(mt2131_attach, fe0->dvb.frontend, |
| 1296 | &i2c_bus->i2c_adap, |
| 1297 | &hauppauge_generic_tunerconfig, 0); |
| 1298 | break; |
| 1299 | case CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP: |
| 1300 | i2c_bus = &dev->i2c_bus[0]; |
| 1301 | fe0->dvb.frontend = dvb_attach(lgdt330x_attach, |
| 1302 | &fusionhdtv_5_express, |
| 1303 | &i2c_bus->i2c_adap); |
| 1304 | if (fe0->dvb.frontend == NULL) |
| 1305 | break; |
| 1306 | dvb_attach(simple_tuner_attach, fe0->dvb.frontend, |
| 1307 | &i2c_bus->i2c_adap, 0x61, |
| 1308 | TUNER_LG_TDVS_H06XF); |
| 1309 | break; |
| 1310 | case CX23885_BOARD_HAUPPAUGE_HVR1500Q: |
| 1311 | i2c_bus = &dev->i2c_bus[1]; |
| 1312 | fe0->dvb.frontend = dvb_attach(s5h1409_attach, |
| 1313 | &hauppauge_hvr1500q_config, |
| 1314 | &dev->i2c_bus[0].i2c_adap); |
| 1315 | if (fe0->dvb.frontend == NULL) |
| 1316 | break; |
| 1317 | dvb_attach(xc5000_attach, fe0->dvb.frontend, |
| 1318 | &i2c_bus->i2c_adap, |
| 1319 | &hauppauge_hvr1500q_tunerconfig); |
| 1320 | break; |
| 1321 | case CX23885_BOARD_HAUPPAUGE_HVR1500: |
| 1322 | i2c_bus = &dev->i2c_bus[1]; |
| 1323 | fe0->dvb.frontend = dvb_attach(s5h1409_attach, |
| 1324 | &hauppauge_hvr1500_config, |
| 1325 | &dev->i2c_bus[0].i2c_adap); |
| 1326 | if (fe0->dvb.frontend != NULL) { |
| 1327 | struct dvb_frontend *fe; |
| 1328 | struct xc2028_config cfg = { |
| 1329 | .i2c_adap = &i2c_bus->i2c_adap, |
| 1330 | .i2c_addr = 0x61, |
| 1331 | }; |
| 1332 | static struct xc2028_ctrl ctl = { |
| 1333 | .fname = XC2028_DEFAULT_FIRMWARE, |
| 1334 | .max_len = 64, |
| 1335 | .demod = XC3028_FE_OREN538, |
| 1336 | }; |
| 1337 | |
| 1338 | fe = dvb_attach(xc2028_attach, |
| 1339 | fe0->dvb.frontend, &cfg); |
| 1340 | if (fe != NULL && fe->ops.tuner_ops.set_config != NULL) |
| 1341 | fe->ops.tuner_ops.set_config(fe, &ctl); |
| 1342 | } |
| 1343 | break; |
| 1344 | case CX23885_BOARD_HAUPPAUGE_HVR1200: |
| 1345 | case CX23885_BOARD_HAUPPAUGE_HVR1700: |
| 1346 | i2c_bus = &dev->i2c_bus[0]; |
| 1347 | fe0->dvb.frontend = dvb_attach(tda10048_attach, |
| 1348 | &hauppauge_hvr1200_config, |
| 1349 | &i2c_bus->i2c_adap); |
| 1350 | if (fe0->dvb.frontend == NULL) |
| 1351 | break; |
| 1352 | dvb_attach(tda829x_attach, fe0->dvb.frontend, |
| 1353 | &dev->i2c_bus[1].i2c_adap, 0x42, |
| 1354 | &tda829x_no_probe); |
| 1355 | dvb_attach(tda18271_attach, fe0->dvb.frontend, |
| 1356 | 0x60, &dev->i2c_bus[1].i2c_adap, |
| 1357 | &hauppauge_hvr1200_tuner_config); |
| 1358 | break; |
| 1359 | case CX23885_BOARD_HAUPPAUGE_HVR1210: |
| 1360 | i2c_bus = &dev->i2c_bus[0]; |
| 1361 | fe0->dvb.frontend = dvb_attach(tda10048_attach, |
| 1362 | &hauppauge_hvr1210_config, |
| 1363 | &i2c_bus->i2c_adap); |
| 1364 | if (fe0->dvb.frontend != NULL) { |
| 1365 | dvb_attach(tda18271_attach, fe0->dvb.frontend, |
| 1366 | 0x60, &dev->i2c_bus[1].i2c_adap, |
| 1367 | &hauppauge_hvr1210_tuner_config); |
| 1368 | } |
| 1369 | break; |
| 1370 | case CX23885_BOARD_HAUPPAUGE_HVR1400: |
| 1371 | i2c_bus = &dev->i2c_bus[0]; |
| 1372 | |
| 1373 | if (!dvb_attach(dib7000p_attach, &dib7000p_ops)) |
| 1374 | return -ENODEV; |
| 1375 | |
| 1376 | fe0->dvb.frontend = dib7000p_ops.init(&i2c_bus->i2c_adap, |
| 1377 | 0x12, &hauppauge_hvr1400_dib7000_config); |
| 1378 | if (fe0->dvb.frontend != NULL) { |
| 1379 | struct dvb_frontend *fe; |
| 1380 | struct xc2028_config cfg = { |
| 1381 | .i2c_adap = &dev->i2c_bus[1].i2c_adap, |
| 1382 | .i2c_addr = 0x64, |
| 1383 | }; |
| 1384 | static struct xc2028_ctrl ctl = { |
| 1385 | .fname = XC3028L_DEFAULT_FIRMWARE, |
| 1386 | .max_len = 64, |
| 1387 | .demod = XC3028_FE_DIBCOM52, |
| 1388 | /* This is true for all demods with |
| 1389 | v36 firmware? */ |
| 1390 | .type = XC2028_D2633, |
| 1391 | }; |
| 1392 | |
| 1393 | fe = dvb_attach(xc2028_attach, |
| 1394 | fe0->dvb.frontend, &cfg); |
| 1395 | if (fe != NULL && fe->ops.tuner_ops.set_config != NULL) |
| 1396 | fe->ops.tuner_ops.set_config(fe, &ctl); |
| 1397 | } |
| 1398 | break; |
| 1399 | case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP: |
| 1400 | i2c_bus = &dev->i2c_bus[port->nr - 1]; |
| 1401 | |
| 1402 | fe0->dvb.frontend = dvb_attach(s5h1409_attach, |
| 1403 | &dvico_s5h1409_config, |
| 1404 | &i2c_bus->i2c_adap); |
| 1405 | if (fe0->dvb.frontend == NULL) |
| 1406 | fe0->dvb.frontend = dvb_attach(s5h1411_attach, |
| 1407 | &dvico_s5h1411_config, |
| 1408 | &i2c_bus->i2c_adap); |
| 1409 | if (fe0->dvb.frontend != NULL) |
| 1410 | dvb_attach(xc5000_attach, fe0->dvb.frontend, |
| 1411 | &i2c_bus->i2c_adap, |
| 1412 | &dvico_xc5000_tunerconfig); |
| 1413 | break; |
| 1414 | case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: { |
| 1415 | i2c_bus = &dev->i2c_bus[port->nr - 1]; |
| 1416 | |
| 1417 | fe0->dvb.frontend = dvb_attach(zl10353_attach, |
| 1418 | &dvico_fusionhdtv_xc3028, |
| 1419 | &i2c_bus->i2c_adap); |
| 1420 | if (fe0->dvb.frontend != NULL) { |
| 1421 | struct dvb_frontend *fe; |
| 1422 | struct xc2028_config cfg = { |
| 1423 | .i2c_adap = &i2c_bus->i2c_adap, |
| 1424 | .i2c_addr = 0x61, |
| 1425 | }; |
| 1426 | static struct xc2028_ctrl ctl = { |
| 1427 | .fname = XC2028_DEFAULT_FIRMWARE, |
| 1428 | .max_len = 64, |
| 1429 | .demod = XC3028_FE_ZARLINK456, |
| 1430 | }; |
| 1431 | |
| 1432 | fe = dvb_attach(xc2028_attach, fe0->dvb.frontend, |
| 1433 | &cfg); |
| 1434 | if (fe != NULL && fe->ops.tuner_ops.set_config != NULL) |
| 1435 | fe->ops.tuner_ops.set_config(fe, &ctl); |
| 1436 | } |
| 1437 | break; |
| 1438 | } |
| 1439 | case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP2: { |
| 1440 | i2c_bus = &dev->i2c_bus[port->nr - 1]; |
| 1441 | /* cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0); */ |
| 1442 | /* cxusb_bluebird_gpio_pulse(adap->dev, 0x02, 1); */ |
| 1443 | |
| 1444 | if (!dvb_attach(dib7000p_attach, &dib7000p_ops)) |
| 1445 | return -ENODEV; |
| 1446 | |
| 1447 | if (dib7000p_ops.i2c_enumeration(&i2c_bus->i2c_adap, 1, 0x12, &dib7070p_dib7000p_config) < 0) { |
| 1448 | printk(KERN_WARNING "Unable to enumerate dib7000p\n"); |
| 1449 | return -ENODEV; |
| 1450 | } |
| 1451 | fe0->dvb.frontend = dib7000p_ops.init(&i2c_bus->i2c_adap, 0x80, &dib7070p_dib7000p_config); |
| 1452 | if (fe0->dvb.frontend != NULL) { |
| 1453 | struct i2c_adapter *tun_i2c; |
| 1454 | |
| 1455 | fe0->dvb.frontend->sec_priv = kmalloc(sizeof(dib7000p_ops), GFP_KERNEL); |
| 1456 | memcpy(fe0->dvb.frontend->sec_priv, &dib7000p_ops, sizeof(dib7000p_ops)); |
| 1457 | tun_i2c = dib7000p_ops.get_i2c_master(fe0->dvb.frontend, DIBX000_I2C_INTERFACE_TUNER, 1); |
| 1458 | if (!dvb_attach(dib0070_attach, fe0->dvb.frontend, tun_i2c, &dib7070p_dib0070_config)) |
| 1459 | return -ENODEV; |
| 1460 | } |
| 1461 | break; |
| 1462 | } |
| 1463 | case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: |
| 1464 | case CX23885_BOARD_COMPRO_VIDEOMATE_E650F: |
| 1465 | case CX23885_BOARD_COMPRO_VIDEOMATE_E800: |
| 1466 | i2c_bus = &dev->i2c_bus[0]; |
| 1467 | |
| 1468 | fe0->dvb.frontend = dvb_attach(zl10353_attach, |
| 1469 | &dvico_fusionhdtv_xc3028, |
| 1470 | &i2c_bus->i2c_adap); |
| 1471 | if (fe0->dvb.frontend != NULL) { |
| 1472 | struct dvb_frontend *fe; |
| 1473 | struct xc2028_config cfg = { |
| 1474 | .i2c_adap = &dev->i2c_bus[1].i2c_adap, |
| 1475 | .i2c_addr = 0x61, |
| 1476 | }; |
| 1477 | static struct xc2028_ctrl ctl = { |
| 1478 | .fname = XC2028_DEFAULT_FIRMWARE, |
| 1479 | .max_len = 64, |
| 1480 | .demod = XC3028_FE_ZARLINK456, |
| 1481 | }; |
| 1482 | |
| 1483 | fe = dvb_attach(xc2028_attach, fe0->dvb.frontend, |
| 1484 | &cfg); |
| 1485 | if (fe != NULL && fe->ops.tuner_ops.set_config != NULL) |
| 1486 | fe->ops.tuner_ops.set_config(fe, &ctl); |
| 1487 | } |
| 1488 | break; |
| 1489 | case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000: |
| 1490 | i2c_bus = &dev->i2c_bus[0]; |
| 1491 | |
| 1492 | fe0->dvb.frontend = dvb_attach(zl10353_attach, |
| 1493 | &dvico_fusionhdtv_xc3028, |
| 1494 | &i2c_bus->i2c_adap); |
| 1495 | if (fe0->dvb.frontend != NULL) { |
| 1496 | struct dvb_frontend *fe; |
| 1497 | struct xc4000_config cfg = { |
| 1498 | .i2c_address = 0x61, |
| 1499 | .default_pm = 0, |
| 1500 | .dvb_amplitude = 134, |
| 1501 | .set_smoothedcvbs = 1, |
| 1502 | .if_khz = 4560 |
| 1503 | }; |
| 1504 | |
| 1505 | fe = dvb_attach(xc4000_attach, fe0->dvb.frontend, |
| 1506 | &dev->i2c_bus[1].i2c_adap, &cfg); |
| 1507 | if (!fe) { |
| 1508 | printk(KERN_ERR "%s/2: xc4000 attach failed\n", |
| 1509 | dev->name); |
| 1510 | goto frontend_detach; |
| 1511 | } |
| 1512 | } |
| 1513 | break; |
| 1514 | case CX23885_BOARD_TBS_6920: |
| 1515 | i2c_bus = &dev->i2c_bus[1]; |
| 1516 | |
| 1517 | fe0->dvb.frontend = dvb_attach(cx24116_attach, |
| 1518 | &tbs_cx24116_config, |
| 1519 | &i2c_bus->i2c_adap); |
| 1520 | if (fe0->dvb.frontend != NULL) |
| 1521 | fe0->dvb.frontend->ops.set_voltage = f300_set_voltage; |
| 1522 | |
| 1523 | break; |
| 1524 | case CX23885_BOARD_TBS_6980: |
| 1525 | case CX23885_BOARD_TBS_6981: |
| 1526 | i2c_bus = &dev->i2c_bus[1]; |
| 1527 | |
| 1528 | switch (port->nr) { |
| 1529 | /* PORT B */ |
| 1530 | case 1: |
| 1531 | fe0->dvb.frontend = dvb_attach(cx24117_attach, |
| 1532 | &tbs_cx24117_config, |
| 1533 | &i2c_bus->i2c_adap); |
| 1534 | break; |
| 1535 | /* PORT C */ |
| 1536 | case 2: |
| 1537 | fe0->dvb.frontend = dvb_attach(cx24117_attach, |
| 1538 | &tbs_cx24117_config, |
| 1539 | &i2c_bus->i2c_adap); |
| 1540 | break; |
| 1541 | } |
| 1542 | break; |
| 1543 | case CX23885_BOARD_TEVII_S470: |
| 1544 | i2c_bus = &dev->i2c_bus[1]; |
| 1545 | |
| 1546 | fe0->dvb.frontend = dvb_attach(ds3000_attach, |
| 1547 | &tevii_ds3000_config, |
| 1548 | &i2c_bus->i2c_adap); |
| 1549 | if (fe0->dvb.frontend != NULL) { |
| 1550 | dvb_attach(ts2020_attach, fe0->dvb.frontend, |
| 1551 | &tevii_ts2020_config, &i2c_bus->i2c_adap); |
| 1552 | fe0->dvb.frontend->ops.set_voltage = f300_set_voltage; |
| 1553 | } |
| 1554 | |
| 1555 | break; |
| 1556 | case CX23885_BOARD_DVBWORLD_2005: |
| 1557 | i2c_bus = &dev->i2c_bus[1]; |
| 1558 | |
| 1559 | fe0->dvb.frontend = dvb_attach(cx24116_attach, |
| 1560 | &dvbworld_cx24116_config, |
| 1561 | &i2c_bus->i2c_adap); |
| 1562 | break; |
| 1563 | case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: |
| 1564 | i2c_bus = &dev->i2c_bus[0]; |
| 1565 | switch (port->nr) { |
| 1566 | /* port B */ |
| 1567 | case 1: |
| 1568 | fe0->dvb.frontend = dvb_attach(stv0900_attach, |
| 1569 | &netup_stv0900_config, |
| 1570 | &i2c_bus->i2c_adap, 0); |
| 1571 | if (fe0->dvb.frontend != NULL) { |
| 1572 | if (dvb_attach(stv6110_attach, |
| 1573 | fe0->dvb.frontend, |
| 1574 | &netup_stv6110_tunerconfig_a, |
| 1575 | &i2c_bus->i2c_adap)) { |
| 1576 | if (!dvb_attach(lnbh24_attach, |
| 1577 | fe0->dvb.frontend, |
| 1578 | &i2c_bus->i2c_adap, |
| 1579 | LNBH24_PCL | LNBH24_TTX, |
| 1580 | LNBH24_TEN, 0x09)) |
| 1581 | printk(KERN_ERR |
| 1582 | "No LNBH24 found!\n"); |
| 1583 | |
| 1584 | } |
| 1585 | } |
| 1586 | break; |
| 1587 | /* port C */ |
| 1588 | case 2: |
| 1589 | fe0->dvb.frontend = dvb_attach(stv0900_attach, |
| 1590 | &netup_stv0900_config, |
| 1591 | &i2c_bus->i2c_adap, 1); |
| 1592 | if (fe0->dvb.frontend != NULL) { |
| 1593 | if (dvb_attach(stv6110_attach, |
| 1594 | fe0->dvb.frontend, |
| 1595 | &netup_stv6110_tunerconfig_b, |
| 1596 | &i2c_bus->i2c_adap)) { |
| 1597 | if (!dvb_attach(lnbh24_attach, |
| 1598 | fe0->dvb.frontend, |
| 1599 | &i2c_bus->i2c_adap, |
| 1600 | LNBH24_PCL | LNBH24_TTX, |
| 1601 | LNBH24_TEN, 0x0a)) |
| 1602 | printk(KERN_ERR |
| 1603 | "No LNBH24 found!\n"); |
| 1604 | |
| 1605 | } |
| 1606 | } |
| 1607 | break; |
| 1608 | } |
| 1609 | break; |
| 1610 | case CX23885_BOARD_MYGICA_X8506: |
| 1611 | i2c_bus = &dev->i2c_bus[0]; |
| 1612 | i2c_bus2 = &dev->i2c_bus[1]; |
| 1613 | fe0->dvb.frontend = dvb_attach(lgs8gxx_attach, |
| 1614 | &mygica_x8506_lgs8gl5_config, |
| 1615 | &i2c_bus->i2c_adap); |
| 1616 | if (fe0->dvb.frontend == NULL) |
| 1617 | break; |
| 1618 | dvb_attach(xc5000_attach, fe0->dvb.frontend, |
| 1619 | &i2c_bus2->i2c_adap, &mygica_x8506_xc5000_config); |
| 1620 | cx23885_set_frontend_hook(port, fe0->dvb.frontend); |
| 1621 | break; |
| 1622 | case CX23885_BOARD_MYGICA_X8507: |
| 1623 | i2c_bus = &dev->i2c_bus[0]; |
| 1624 | i2c_bus2 = &dev->i2c_bus[1]; |
| 1625 | fe0->dvb.frontend = dvb_attach(mb86a20s_attach, |
| 1626 | &mygica_x8507_mb86a20s_config, |
| 1627 | &i2c_bus->i2c_adap); |
| 1628 | if (fe0->dvb.frontend == NULL) |
| 1629 | break; |
| 1630 | |
| 1631 | dvb_attach(xc5000_attach, fe0->dvb.frontend, |
| 1632 | &i2c_bus2->i2c_adap, |
| 1633 | &mygica_x8507_xc5000_config); |
| 1634 | cx23885_set_frontend_hook(port, fe0->dvb.frontend); |
| 1635 | break; |
| 1636 | case CX23885_BOARD_MAGICPRO_PROHDTVE2: |
| 1637 | i2c_bus = &dev->i2c_bus[0]; |
| 1638 | i2c_bus2 = &dev->i2c_bus[1]; |
| 1639 | fe0->dvb.frontend = dvb_attach(lgs8gxx_attach, |
| 1640 | &magicpro_prohdtve2_lgs8g75_config, |
| 1641 | &i2c_bus->i2c_adap); |
| 1642 | if (fe0->dvb.frontend == NULL) |
| 1643 | break; |
| 1644 | dvb_attach(xc5000_attach, fe0->dvb.frontend, |
| 1645 | &i2c_bus2->i2c_adap, |
| 1646 | &magicpro_prohdtve2_xc5000_config); |
| 1647 | cx23885_set_frontend_hook(port, fe0->dvb.frontend); |
| 1648 | break; |
| 1649 | case CX23885_BOARD_HAUPPAUGE_HVR1850: |
| 1650 | i2c_bus = &dev->i2c_bus[0]; |
| 1651 | fe0->dvb.frontend = dvb_attach(s5h1411_attach, |
| 1652 | &hcw_s5h1411_config, |
| 1653 | &i2c_bus->i2c_adap); |
| 1654 | if (fe0->dvb.frontend == NULL) |
| 1655 | break; |
| 1656 | dvb_attach(tda18271_attach, fe0->dvb.frontend, |
| 1657 | 0x60, &dev->i2c_bus[0].i2c_adap, |
| 1658 | &hauppauge_tda18271_config); |
| 1659 | |
| 1660 | tda18271_attach(&dev->ts1.analog_fe, |
| 1661 | 0x60, &dev->i2c_bus[1].i2c_adap, |
| 1662 | &hauppauge_tda18271_config); |
| 1663 | |
| 1664 | break; |
| 1665 | case CX23885_BOARD_HAUPPAUGE_HVR1290: |
| 1666 | i2c_bus = &dev->i2c_bus[0]; |
| 1667 | fe0->dvb.frontend = dvb_attach(s5h1411_attach, |
| 1668 | &hcw_s5h1411_config, |
| 1669 | &i2c_bus->i2c_adap); |
| 1670 | if (fe0->dvb.frontend == NULL) |
| 1671 | break; |
| 1672 | dvb_attach(tda18271_attach, fe0->dvb.frontend, |
| 1673 | 0x60, &dev->i2c_bus[0].i2c_adap, |
| 1674 | &hauppauge_tda18271_config); |
| 1675 | break; |
| 1676 | case CX23885_BOARD_MYGICA_X8558PRO: |
| 1677 | switch (port->nr) { |
| 1678 | /* port B */ |
| 1679 | case 1: |
| 1680 | i2c_bus = &dev->i2c_bus[0]; |
| 1681 | fe0->dvb.frontend = dvb_attach(atbm8830_attach, |
| 1682 | &mygica_x8558pro_atbm8830_cfg1, |
| 1683 | &i2c_bus->i2c_adap); |
| 1684 | if (fe0->dvb.frontend == NULL) |
| 1685 | break; |
| 1686 | dvb_attach(max2165_attach, fe0->dvb.frontend, |
| 1687 | &i2c_bus->i2c_adap, |
| 1688 | &mygic_x8558pro_max2165_cfg1); |
| 1689 | break; |
| 1690 | /* port C */ |
| 1691 | case 2: |
| 1692 | i2c_bus = &dev->i2c_bus[1]; |
| 1693 | fe0->dvb.frontend = dvb_attach(atbm8830_attach, |
| 1694 | &mygica_x8558pro_atbm8830_cfg2, |
| 1695 | &i2c_bus->i2c_adap); |
| 1696 | if (fe0->dvb.frontend == NULL) |
| 1697 | break; |
| 1698 | dvb_attach(max2165_attach, fe0->dvb.frontend, |
| 1699 | &i2c_bus->i2c_adap, |
| 1700 | &mygic_x8558pro_max2165_cfg2); |
| 1701 | } |
| 1702 | break; |
| 1703 | case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: |
| 1704 | i2c_bus = &dev->i2c_bus[0]; |
| 1705 | mfe_shared = 1;/* MFE */ |
| 1706 | port->frontends.gate = 0;/* not clear for me yet */ |
| 1707 | /* ports B, C */ |
| 1708 | /* MFE frontend 1 DVB-T */ |
| 1709 | fe0->dvb.frontend = dvb_attach(stv0367ter_attach, |
| 1710 | &netup_stv0367_config[port->nr - 1], |
| 1711 | &i2c_bus->i2c_adap); |
| 1712 | if (fe0->dvb.frontend == NULL) |
| 1713 | break; |
| 1714 | if (NULL == dvb_attach(xc5000_attach, fe0->dvb.frontend, |
| 1715 | &i2c_bus->i2c_adap, |
| 1716 | &netup_xc5000_config[port->nr - 1])) |
| 1717 | goto frontend_detach; |
| 1718 | /* load xc5000 firmware */ |
| 1719 | fe0->dvb.frontend->ops.tuner_ops.init(fe0->dvb.frontend); |
| 1720 | |
| 1721 | /* MFE frontend 2 */ |
| 1722 | fe1 = vb2_dvb_get_frontend(&port->frontends, 2); |
| 1723 | if (fe1 == NULL) |
| 1724 | goto frontend_detach; |
| 1725 | /* DVB-C init */ |
| 1726 | fe1->dvb.frontend = dvb_attach(stv0367cab_attach, |
| 1727 | &netup_stv0367_config[port->nr - 1], |
| 1728 | &i2c_bus->i2c_adap); |
| 1729 | if (fe1->dvb.frontend == NULL) |
| 1730 | break; |
| 1731 | |
| 1732 | fe1->dvb.frontend->id = 1; |
| 1733 | if (NULL == dvb_attach(xc5000_attach, |
| 1734 | fe1->dvb.frontend, |
| 1735 | &i2c_bus->i2c_adap, |
| 1736 | &netup_xc5000_config[port->nr - 1])) |
| 1737 | goto frontend_detach; |
| 1738 | break; |
| 1739 | case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL: |
| 1740 | i2c_bus = &dev->i2c_bus[0]; |
| 1741 | i2c_bus2 = &dev->i2c_bus[1]; |
| 1742 | |
| 1743 | switch (port->nr) { |
| 1744 | /* port b */ |
| 1745 | case 1: |
| 1746 | fe0->dvb.frontend = dvb_attach(drxk_attach, |
| 1747 | &terratec_drxk_config[0], |
| 1748 | &i2c_bus->i2c_adap); |
| 1749 | if (fe0->dvb.frontend == NULL) |
| 1750 | break; |
| 1751 | if (!dvb_attach(mt2063_attach, |
| 1752 | fe0->dvb.frontend, |
| 1753 | &terratec_mt2063_config[0], |
| 1754 | &i2c_bus2->i2c_adap)) |
| 1755 | goto frontend_detach; |
| 1756 | break; |
| 1757 | /* port c */ |
| 1758 | case 2: |
| 1759 | fe0->dvb.frontend = dvb_attach(drxk_attach, |
| 1760 | &terratec_drxk_config[1], |
| 1761 | &i2c_bus->i2c_adap); |
| 1762 | if (fe0->dvb.frontend == NULL) |
| 1763 | break; |
| 1764 | if (!dvb_attach(mt2063_attach, |
| 1765 | fe0->dvb.frontend, |
| 1766 | &terratec_mt2063_config[1], |
| 1767 | &i2c_bus2->i2c_adap)) |
| 1768 | goto frontend_detach; |
| 1769 | break; |
| 1770 | } |
| 1771 | break; |
| 1772 | case CX23885_BOARD_TEVII_S471: |
| 1773 | i2c_bus = &dev->i2c_bus[1]; |
| 1774 | |
| 1775 | fe0->dvb.frontend = dvb_attach(ds3000_attach, |
| 1776 | &tevii_ds3000_config, |
| 1777 | &i2c_bus->i2c_adap); |
| 1778 | if (fe0->dvb.frontend == NULL) |
| 1779 | break; |
| 1780 | dvb_attach(ts2020_attach, fe0->dvb.frontend, |
| 1781 | &tevii_ts2020_config, &i2c_bus->i2c_adap); |
| 1782 | break; |
| 1783 | case CX23885_BOARD_PROF_8000: |
| 1784 | i2c_bus = &dev->i2c_bus[0]; |
| 1785 | |
| 1786 | fe0->dvb.frontend = dvb_attach(stv090x_attach, |
| 1787 | &prof_8000_stv090x_config, |
| 1788 | &i2c_bus->i2c_adap, |
| 1789 | STV090x_DEMODULATOR_0); |
| 1790 | if (fe0->dvb.frontend == NULL) |
| 1791 | break; |
| 1792 | if (!dvb_attach(stb6100_attach, |
| 1793 | fe0->dvb.frontend, |
| 1794 | &prof_8000_stb6100_config, |
| 1795 | &i2c_bus->i2c_adap)) |
| 1796 | goto frontend_detach; |
| 1797 | |
| 1798 | fe0->dvb.frontend->ops.set_voltage = p8000_set_voltage; |
| 1799 | break; |
| 1800 | case CX23885_BOARD_HAUPPAUGE_HVR4400: { |
| 1801 | struct tda10071_platform_data tda10071_pdata = hauppauge_tda10071_pdata; |
| 1802 | struct a8293_platform_data a8293_pdata = {}; |
| 1803 | |
| 1804 | i2c_bus = &dev->i2c_bus[0]; |
| 1805 | i2c_bus2 = &dev->i2c_bus[1]; |
| 1806 | switch (port->nr) { |
| 1807 | /* port b */ |
| 1808 | case 1: |
| 1809 | /* attach demod + tuner combo */ |
| 1810 | memset(&info, 0, sizeof(info)); |
| 1811 | strlcpy(info.type, "tda10071_cx24118", I2C_NAME_SIZE); |
| 1812 | info.addr = 0x05; |
| 1813 | info.platform_data = &tda10071_pdata; |
| 1814 | request_module("tda10071"); |
| 1815 | client_demod = i2c_new_device(&i2c_bus->i2c_adap, &info); |
| 1816 | if (!client_demod || !client_demod->dev.driver) |
| 1817 | goto frontend_detach; |
| 1818 | if (!try_module_get(client_demod->dev.driver->owner)) { |
| 1819 | i2c_unregister_device(client_demod); |
| 1820 | goto frontend_detach; |
| 1821 | } |
| 1822 | fe0->dvb.frontend = tda10071_pdata.get_dvb_frontend(client_demod); |
| 1823 | port->i2c_client_demod = client_demod; |
| 1824 | |
| 1825 | /* attach SEC */ |
| 1826 | a8293_pdata.dvb_frontend = fe0->dvb.frontend; |
| 1827 | memset(&info, 0, sizeof(info)); |
| 1828 | strlcpy(info.type, "a8293", I2C_NAME_SIZE); |
| 1829 | info.addr = 0x0b; |
| 1830 | info.platform_data = &a8293_pdata; |
| 1831 | request_module("a8293"); |
| 1832 | client_sec = i2c_new_device(&i2c_bus->i2c_adap, &info); |
| 1833 | if (!client_sec || !client_sec->dev.driver) |
| 1834 | goto frontend_detach; |
| 1835 | if (!try_module_get(client_sec->dev.driver->owner)) { |
| 1836 | i2c_unregister_device(client_sec); |
| 1837 | goto frontend_detach; |
| 1838 | } |
| 1839 | port->i2c_client_sec = client_sec; |
| 1840 | break; |
| 1841 | /* port c */ |
| 1842 | case 2: |
| 1843 | fe0->dvb.frontend = dvb_attach(si2165_attach, |
| 1844 | &hauppauge_hvr4400_si2165_config, |
| 1845 | &i2c_bus->i2c_adap); |
| 1846 | if (fe0->dvb.frontend == NULL) |
| 1847 | break; |
| 1848 | fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL; |
| 1849 | if (!dvb_attach(tda18271_attach, |
| 1850 | fe0->dvb.frontend, |
| 1851 | 0x60, &i2c_bus2->i2c_adap, |
| 1852 | &hauppauge_hvr4400_tuner_config)) |
| 1853 | goto frontend_detach; |
| 1854 | break; |
| 1855 | } |
| 1856 | break; |
| 1857 | } |
| 1858 | case CX23885_BOARD_HAUPPAUGE_STARBURST: { |
| 1859 | struct tda10071_platform_data tda10071_pdata = hauppauge_tda10071_pdata; |
| 1860 | struct a8293_platform_data a8293_pdata = {}; |
| 1861 | |
| 1862 | i2c_bus = &dev->i2c_bus[0]; |
| 1863 | |
| 1864 | /* attach demod + tuner combo */ |
| 1865 | memset(&info, 0, sizeof(info)); |
| 1866 | strlcpy(info.type, "tda10071_cx24118", I2C_NAME_SIZE); |
| 1867 | info.addr = 0x05; |
| 1868 | info.platform_data = &tda10071_pdata; |
| 1869 | request_module("tda10071"); |
| 1870 | client_demod = i2c_new_device(&i2c_bus->i2c_adap, &info); |
| 1871 | if (!client_demod || !client_demod->dev.driver) |
| 1872 | goto frontend_detach; |
| 1873 | if (!try_module_get(client_demod->dev.driver->owner)) { |
| 1874 | i2c_unregister_device(client_demod); |
| 1875 | goto frontend_detach; |
| 1876 | } |
| 1877 | fe0->dvb.frontend = tda10071_pdata.get_dvb_frontend(client_demod); |
| 1878 | port->i2c_client_demod = client_demod; |
| 1879 | |
| 1880 | /* attach SEC */ |
| 1881 | a8293_pdata.dvb_frontend = fe0->dvb.frontend; |
| 1882 | memset(&info, 0, sizeof(info)); |
| 1883 | strlcpy(info.type, "a8293", I2C_NAME_SIZE); |
| 1884 | info.addr = 0x0b; |
| 1885 | info.platform_data = &a8293_pdata; |
| 1886 | request_module("a8293"); |
| 1887 | client_sec = i2c_new_device(&i2c_bus->i2c_adap, &info); |
| 1888 | if (!client_sec || !client_sec->dev.driver) |
| 1889 | goto frontend_detach; |
| 1890 | if (!try_module_get(client_sec->dev.driver->owner)) { |
| 1891 | i2c_unregister_device(client_sec); |
| 1892 | goto frontend_detach; |
| 1893 | } |
| 1894 | port->i2c_client_sec = client_sec; |
| 1895 | break; |
| 1896 | } |
| 1897 | case CX23885_BOARD_DVBSKY_T9580: |
| 1898 | case CX23885_BOARD_DVBSKY_S950: |
| 1899 | i2c_bus = &dev->i2c_bus[0]; |
| 1900 | i2c_bus2 = &dev->i2c_bus[1]; |
| 1901 | switch (port->nr) { |
| 1902 | /* port b - satellite */ |
| 1903 | case 1: |
| 1904 | /* attach frontend */ |
| 1905 | fe0->dvb.frontend = dvb_attach(m88ds3103_attach, |
| 1906 | &dvbsky_t9580_m88ds3103_config, |
| 1907 | &i2c_bus2->i2c_adap, &adapter); |
| 1908 | if (fe0->dvb.frontend == NULL) |
| 1909 | break; |
| 1910 | |
| 1911 | /* attach tuner */ |
| 1912 | memset(&ts2020_config, 0, sizeof(ts2020_config)); |
| 1913 | ts2020_config.fe = fe0->dvb.frontend; |
| 1914 | ts2020_config.get_agc_pwm = m88ds3103_get_agc_pwm; |
| 1915 | memset(&info, 0, sizeof(struct i2c_board_info)); |
| 1916 | strlcpy(info.type, "ts2020", I2C_NAME_SIZE); |
| 1917 | info.addr = 0x60; |
| 1918 | info.platform_data = &ts2020_config; |
| 1919 | request_module(info.type); |
| 1920 | client_tuner = i2c_new_device(adapter, &info); |
| 1921 | if (client_tuner == NULL || |
| 1922 | client_tuner->dev.driver == NULL) |
| 1923 | goto frontend_detach; |
| 1924 | if (!try_module_get(client_tuner->dev.driver->owner)) { |
| 1925 | i2c_unregister_device(client_tuner); |
| 1926 | goto frontend_detach; |
| 1927 | } |
| 1928 | |
| 1929 | /* delegate signal strength measurement to tuner */ |
| 1930 | fe0->dvb.frontend->ops.read_signal_strength = |
| 1931 | fe0->dvb.frontend->ops.tuner_ops.get_rf_strength; |
| 1932 | |
| 1933 | /* |
| 1934 | * for setting the voltage we need to set GPIOs on |
| 1935 | * the card. |
| 1936 | */ |
| 1937 | port->fe_set_voltage = |
| 1938 | fe0->dvb.frontend->ops.set_voltage; |
| 1939 | fe0->dvb.frontend->ops.set_voltage = |
| 1940 | dvbsky_t9580_set_voltage; |
| 1941 | |
| 1942 | port->i2c_client_tuner = client_tuner; |
| 1943 | |
| 1944 | break; |
| 1945 | /* port c - terrestrial/cable */ |
| 1946 | case 2: |
| 1947 | /* attach frontend */ |
| 1948 | memset(&si2168_config, 0, sizeof(si2168_config)); |
| 1949 | si2168_config.i2c_adapter = &adapter; |
| 1950 | si2168_config.fe = &fe0->dvb.frontend; |
| 1951 | si2168_config.ts_mode = SI2168_TS_SERIAL; |
| 1952 | memset(&info, 0, sizeof(struct i2c_board_info)); |
| 1953 | strlcpy(info.type, "si2168", I2C_NAME_SIZE); |
| 1954 | info.addr = 0x64; |
| 1955 | info.platform_data = &si2168_config; |
| 1956 | request_module(info.type); |
| 1957 | client_demod = i2c_new_device(&i2c_bus->i2c_adap, &info); |
| 1958 | if (client_demod == NULL || |
| 1959 | client_demod->dev.driver == NULL) |
| 1960 | goto frontend_detach; |
| 1961 | if (!try_module_get(client_demod->dev.driver->owner)) { |
| 1962 | i2c_unregister_device(client_demod); |
| 1963 | goto frontend_detach; |
| 1964 | } |
| 1965 | port->i2c_client_demod = client_demod; |
| 1966 | |
| 1967 | /* attach tuner */ |
| 1968 | memset(&si2157_config, 0, sizeof(si2157_config)); |
| 1969 | si2157_config.fe = fe0->dvb.frontend; |
| 1970 | si2157_config.if_port = 1; |
| 1971 | memset(&info, 0, sizeof(struct i2c_board_info)); |
| 1972 | strlcpy(info.type, "si2157", I2C_NAME_SIZE); |
| 1973 | info.addr = 0x60; |
| 1974 | info.platform_data = &si2157_config; |
| 1975 | request_module(info.type); |
| 1976 | client_tuner = i2c_new_device(adapter, &info); |
| 1977 | if (client_tuner == NULL || |
| 1978 | client_tuner->dev.driver == NULL) |
| 1979 | goto frontend_detach; |
| 1980 | |
| 1981 | if (!try_module_get(client_tuner->dev.driver->owner)) { |
| 1982 | i2c_unregister_device(client_tuner); |
| 1983 | goto frontend_detach; |
| 1984 | } |
| 1985 | port->i2c_client_tuner = client_tuner; |
| 1986 | break; |
| 1987 | } |
| 1988 | break; |
| 1989 | case CX23885_BOARD_DVBSKY_T980C: |
| 1990 | case CX23885_BOARD_TT_CT2_4500_CI: |
| 1991 | i2c_bus = &dev->i2c_bus[0]; |
| 1992 | i2c_bus2 = &dev->i2c_bus[1]; |
| 1993 | |
| 1994 | /* attach frontend */ |
| 1995 | memset(&si2168_config, 0, sizeof(si2168_config)); |
| 1996 | si2168_config.i2c_adapter = &adapter; |
| 1997 | si2168_config.fe = &fe0->dvb.frontend; |
| 1998 | si2168_config.ts_mode = SI2168_TS_PARALLEL; |
| 1999 | memset(&info, 0, sizeof(struct i2c_board_info)); |
| 2000 | strlcpy(info.type, "si2168", I2C_NAME_SIZE); |
| 2001 | info.addr = 0x64; |
| 2002 | info.platform_data = &si2168_config; |
| 2003 | request_module(info.type); |
| 2004 | client_demod = i2c_new_device(&i2c_bus2->i2c_adap, &info); |
| 2005 | if (client_demod == NULL || client_demod->dev.driver == NULL) |
| 2006 | goto frontend_detach; |
| 2007 | if (!try_module_get(client_demod->dev.driver->owner)) { |
| 2008 | i2c_unregister_device(client_demod); |
| 2009 | goto frontend_detach; |
| 2010 | } |
| 2011 | port->i2c_client_demod = client_demod; |
| 2012 | |
| 2013 | /* attach tuner */ |
| 2014 | memset(&si2157_config, 0, sizeof(si2157_config)); |
| 2015 | si2157_config.fe = fe0->dvb.frontend; |
| 2016 | si2157_config.if_port = 1; |
| 2017 | memset(&info, 0, sizeof(struct i2c_board_info)); |
| 2018 | strlcpy(info.type, "si2157", I2C_NAME_SIZE); |
| 2019 | info.addr = 0x60; |
| 2020 | info.platform_data = &si2157_config; |
| 2021 | request_module(info.type); |
| 2022 | client_tuner = i2c_new_device(adapter, &info); |
| 2023 | if (client_tuner == NULL || |
| 2024 | client_tuner->dev.driver == NULL) |
| 2025 | goto frontend_detach; |
| 2026 | if (!try_module_get(client_tuner->dev.driver->owner)) { |
| 2027 | i2c_unregister_device(client_tuner); |
| 2028 | goto frontend_detach; |
| 2029 | } |
| 2030 | port->i2c_client_tuner = client_tuner; |
| 2031 | break; |
| 2032 | case CX23885_BOARD_DVBSKY_S950C: |
| 2033 | i2c_bus = &dev->i2c_bus[0]; |
| 2034 | i2c_bus2 = &dev->i2c_bus[1]; |
| 2035 | |
| 2036 | /* attach frontend */ |
| 2037 | fe0->dvb.frontend = dvb_attach(m88ds3103_attach, |
| 2038 | &dvbsky_s950c_m88ds3103_config, |
| 2039 | &i2c_bus2->i2c_adap, &adapter); |
| 2040 | if (fe0->dvb.frontend == NULL) |
| 2041 | break; |
| 2042 | |
| 2043 | /* attach tuner */ |
| 2044 | memset(&ts2020_config, 0, sizeof(ts2020_config)); |
| 2045 | ts2020_config.fe = fe0->dvb.frontend; |
| 2046 | ts2020_config.get_agc_pwm = m88ds3103_get_agc_pwm; |
| 2047 | memset(&info, 0, sizeof(struct i2c_board_info)); |
| 2048 | strlcpy(info.type, "ts2020", I2C_NAME_SIZE); |
| 2049 | info.addr = 0x60; |
| 2050 | info.platform_data = &ts2020_config; |
| 2051 | request_module(info.type); |
| 2052 | client_tuner = i2c_new_device(adapter, &info); |
| 2053 | if (client_tuner == NULL || client_tuner->dev.driver == NULL) |
| 2054 | goto frontend_detach; |
| 2055 | if (!try_module_get(client_tuner->dev.driver->owner)) { |
| 2056 | i2c_unregister_device(client_tuner); |
| 2057 | goto frontend_detach; |
| 2058 | } |
| 2059 | |
| 2060 | /* delegate signal strength measurement to tuner */ |
| 2061 | fe0->dvb.frontend->ops.read_signal_strength = |
| 2062 | fe0->dvb.frontend->ops.tuner_ops.get_rf_strength; |
| 2063 | |
| 2064 | port->i2c_client_tuner = client_tuner; |
| 2065 | break; |
| 2066 | case CX23885_BOARD_DVBSKY_S952: |
| 2067 | switch (port->nr) { |
| 2068 | /* port b */ |
| 2069 | case 1: |
| 2070 | i2c_bus = &dev->i2c_bus[1]; |
| 2071 | p_m88ds3103_config = &dvbsky_t9580_m88ds3103_config; |
| 2072 | p_set_voltage = dvbsky_t9580_set_voltage; |
| 2073 | break; |
| 2074 | /* port c */ |
| 2075 | case 2: |
| 2076 | i2c_bus = &dev->i2c_bus[0]; |
| 2077 | p_m88ds3103_config = &dvbsky_s952_portc_m88ds3103_config; |
| 2078 | p_set_voltage = dvbsky_s952_portc_set_voltage; |
| 2079 | break; |
| 2080 | } |
| 2081 | |
| 2082 | /* attach frontend */ |
| 2083 | fe0->dvb.frontend = dvb_attach(m88ds3103_attach, |
| 2084 | p_m88ds3103_config, |
| 2085 | &i2c_bus->i2c_adap, &adapter); |
| 2086 | if (fe0->dvb.frontend == NULL) |
| 2087 | break; |
| 2088 | |
| 2089 | /* attach tuner */ |
| 2090 | memset(&ts2020_config, 0, sizeof(ts2020_config)); |
| 2091 | ts2020_config.fe = fe0->dvb.frontend; |
| 2092 | ts2020_config.get_agc_pwm = m88ds3103_get_agc_pwm; |
| 2093 | memset(&info, 0, sizeof(struct i2c_board_info)); |
| 2094 | strlcpy(info.type, "ts2020", I2C_NAME_SIZE); |
| 2095 | info.addr = 0x60; |
| 2096 | info.platform_data = &ts2020_config; |
| 2097 | request_module(info.type); |
| 2098 | client_tuner = i2c_new_device(adapter, &info); |
| 2099 | if (client_tuner == NULL || client_tuner->dev.driver == NULL) |
| 2100 | goto frontend_detach; |
| 2101 | if (!try_module_get(client_tuner->dev.driver->owner)) { |
| 2102 | i2c_unregister_device(client_tuner); |
| 2103 | goto frontend_detach; |
| 2104 | } |
| 2105 | |
| 2106 | /* delegate signal strength measurement to tuner */ |
| 2107 | fe0->dvb.frontend->ops.read_signal_strength = |
| 2108 | fe0->dvb.frontend->ops.tuner_ops.get_rf_strength; |
| 2109 | |
| 2110 | /* |
| 2111 | * for setting the voltage we need to set GPIOs on |
| 2112 | * the card. |
| 2113 | */ |
| 2114 | port->fe_set_voltage = |
| 2115 | fe0->dvb.frontend->ops.set_voltage; |
| 2116 | fe0->dvb.frontend->ops.set_voltage = p_set_voltage; |
| 2117 | |
| 2118 | port->i2c_client_tuner = client_tuner; |
| 2119 | break; |
| 2120 | case CX23885_BOARD_DVBSKY_T982: |
| 2121 | memset(&si2168_config, 0, sizeof(si2168_config)); |
| 2122 | switch (port->nr) { |
| 2123 | /* port b */ |
| 2124 | case 1: |
| 2125 | i2c_bus = &dev->i2c_bus[1]; |
| 2126 | si2168_config.ts_mode = SI2168_TS_PARALLEL; |
| 2127 | break; |
| 2128 | /* port c */ |
| 2129 | case 2: |
| 2130 | i2c_bus = &dev->i2c_bus[0]; |
| 2131 | si2168_config.ts_mode = SI2168_TS_SERIAL; |
| 2132 | break; |
| 2133 | } |
| 2134 | |
| 2135 | /* attach frontend */ |
| 2136 | si2168_config.i2c_adapter = &adapter; |
| 2137 | si2168_config.fe = &fe0->dvb.frontend; |
| 2138 | memset(&info, 0, sizeof(struct i2c_board_info)); |
| 2139 | strlcpy(info.type, "si2168", I2C_NAME_SIZE); |
| 2140 | info.addr = 0x64; |
| 2141 | info.platform_data = &si2168_config; |
| 2142 | request_module(info.type); |
| 2143 | client_demod = i2c_new_device(&i2c_bus->i2c_adap, &info); |
| 2144 | if (client_demod == NULL || client_demod->dev.driver == NULL) |
| 2145 | goto frontend_detach; |
| 2146 | if (!try_module_get(client_demod->dev.driver->owner)) { |
| 2147 | i2c_unregister_device(client_demod); |
| 2148 | goto frontend_detach; |
| 2149 | } |
| 2150 | port->i2c_client_demod = client_demod; |
| 2151 | |
| 2152 | /* attach tuner */ |
| 2153 | memset(&si2157_config, 0, sizeof(si2157_config)); |
| 2154 | si2157_config.fe = fe0->dvb.frontend; |
| 2155 | si2157_config.if_port = 1; |
| 2156 | memset(&info, 0, sizeof(struct i2c_board_info)); |
| 2157 | strlcpy(info.type, "si2157", I2C_NAME_SIZE); |
| 2158 | info.addr = 0x60; |
| 2159 | info.platform_data = &si2157_config; |
| 2160 | request_module(info.type); |
| 2161 | client_tuner = i2c_new_device(adapter, &info); |
| 2162 | if (client_tuner == NULL || |
| 2163 | client_tuner->dev.driver == NULL) |
| 2164 | goto frontend_detach; |
| 2165 | if (!try_module_get(client_tuner->dev.driver->owner)) { |
| 2166 | i2c_unregister_device(client_tuner); |
| 2167 | goto frontend_detach; |
| 2168 | } |
| 2169 | port->i2c_client_tuner = client_tuner; |
| 2170 | break; |
| 2171 | case CX23885_BOARD_HAUPPAUGE_HVR5525: { |
| 2172 | struct m88rs6000t_config m88rs6000t_config; |
| 2173 | struct a8293_platform_data a8293_pdata = {}; |
| 2174 | |
| 2175 | switch (port->nr) { |
| 2176 | |
| 2177 | /* port b - satellite */ |
| 2178 | case 1: |
| 2179 | /* attach frontend */ |
| 2180 | fe0->dvb.frontend = dvb_attach(m88ds3103_attach, |
| 2181 | &hauppauge_hvr5525_m88ds3103_config, |
| 2182 | &dev->i2c_bus[0].i2c_adap, &adapter); |
| 2183 | if (fe0->dvb.frontend == NULL) |
| 2184 | break; |
| 2185 | |
| 2186 | /* attach SEC */ |
| 2187 | a8293_pdata.dvb_frontend = fe0->dvb.frontend; |
| 2188 | memset(&info, 0, sizeof(info)); |
| 2189 | strlcpy(info.type, "a8293", I2C_NAME_SIZE); |
| 2190 | info.addr = 0x0b; |
| 2191 | info.platform_data = &a8293_pdata; |
| 2192 | request_module("a8293"); |
| 2193 | client_sec = i2c_new_device(&dev->i2c_bus[0].i2c_adap, &info); |
| 2194 | if (!client_sec || !client_sec->dev.driver) |
| 2195 | goto frontend_detach; |
| 2196 | if (!try_module_get(client_sec->dev.driver->owner)) { |
| 2197 | i2c_unregister_device(client_sec); |
| 2198 | goto frontend_detach; |
| 2199 | } |
| 2200 | port->i2c_client_sec = client_sec; |
| 2201 | |
| 2202 | /* attach tuner */ |
| 2203 | memset(&m88rs6000t_config, 0, sizeof(m88rs6000t_config)); |
| 2204 | m88rs6000t_config.fe = fe0->dvb.frontend; |
| 2205 | memset(&info, 0, sizeof(struct i2c_board_info)); |
| 2206 | strlcpy(info.type, "m88rs6000t", I2C_NAME_SIZE); |
| 2207 | info.addr = 0x21; |
| 2208 | info.platform_data = &m88rs6000t_config; |
| 2209 | request_module("%s", info.type); |
| 2210 | client_tuner = i2c_new_device(adapter, &info); |
| 2211 | if (!client_tuner || !client_tuner->dev.driver) |
| 2212 | goto frontend_detach; |
| 2213 | if (!try_module_get(client_tuner->dev.driver->owner)) { |
| 2214 | i2c_unregister_device(client_tuner); |
| 2215 | goto frontend_detach; |
| 2216 | } |
| 2217 | port->i2c_client_tuner = client_tuner; |
| 2218 | |
| 2219 | /* delegate signal strength measurement to tuner */ |
| 2220 | fe0->dvb.frontend->ops.read_signal_strength = |
| 2221 | fe0->dvb.frontend->ops.tuner_ops.get_rf_strength; |
| 2222 | break; |
| 2223 | /* port c - terrestrial/cable */ |
| 2224 | case 2: |
| 2225 | /* attach frontend */ |
| 2226 | memset(&si2168_config, 0, sizeof(si2168_config)); |
| 2227 | si2168_config.i2c_adapter = &adapter; |
| 2228 | si2168_config.fe = &fe0->dvb.frontend; |
| 2229 | si2168_config.ts_mode = SI2168_TS_SERIAL; |
| 2230 | memset(&info, 0, sizeof(struct i2c_board_info)); |
| 2231 | strlcpy(info.type, "si2168", I2C_NAME_SIZE); |
| 2232 | info.addr = 0x64; |
| 2233 | info.platform_data = &si2168_config; |
| 2234 | request_module("%s", info.type); |
| 2235 | client_demod = i2c_new_device(&dev->i2c_bus[0].i2c_adap, &info); |
| 2236 | if (!client_demod || !client_demod->dev.driver) |
| 2237 | goto frontend_detach; |
| 2238 | if (!try_module_get(client_demod->dev.driver->owner)) { |
| 2239 | i2c_unregister_device(client_demod); |
| 2240 | goto frontend_detach; |
| 2241 | } |
| 2242 | port->i2c_client_demod = client_demod; |
| 2243 | |
| 2244 | /* attach tuner */ |
| 2245 | memset(&si2157_config, 0, sizeof(si2157_config)); |
| 2246 | si2157_config.fe = fe0->dvb.frontend; |
| 2247 | si2157_config.if_port = 1; |
| 2248 | memset(&info, 0, sizeof(struct i2c_board_info)); |
| 2249 | strlcpy(info.type, "si2157", I2C_NAME_SIZE); |
| 2250 | info.addr = 0x60; |
| 2251 | info.platform_data = &si2157_config; |
| 2252 | request_module("%s", info.type); |
| 2253 | client_tuner = i2c_new_device(&dev->i2c_bus[1].i2c_adap, &info); |
| 2254 | if (!client_tuner || !client_tuner->dev.driver) { |
| 2255 | module_put(client_demod->dev.driver->owner); |
| 2256 | i2c_unregister_device(client_demod); |
| 2257 | port->i2c_client_demod = NULL; |
| 2258 | goto frontend_detach; |
| 2259 | } |
| 2260 | if (!try_module_get(client_tuner->dev.driver->owner)) { |
| 2261 | i2c_unregister_device(client_tuner); |
| 2262 | module_put(client_demod->dev.driver->owner); |
| 2263 | i2c_unregister_device(client_demod); |
| 2264 | port->i2c_client_demod = NULL; |
| 2265 | goto frontend_detach; |
| 2266 | } |
| 2267 | port->i2c_client_tuner = client_tuner; |
| 2268 | break; |
| 2269 | } |
| 2270 | break; |
| 2271 | } |
| 2272 | default: |
| 2273 | printk(KERN_INFO "%s: The frontend of your DVB/ATSC card " |
| 2274 | " isn't supported yet\n", |
| 2275 | dev->name); |
| 2276 | break; |
| 2277 | } |
| 2278 | |
| 2279 | if ((NULL == fe0->dvb.frontend) || (fe1 && NULL == fe1->dvb.frontend)) { |
| 2280 | printk(KERN_ERR "%s: frontend initialization failed\n", |
| 2281 | dev->name); |
| 2282 | goto frontend_detach; |
| 2283 | } |
| 2284 | |
| 2285 | /* define general-purpose callback pointer */ |
| 2286 | fe0->dvb.frontend->callback = cx23885_tuner_callback; |
| 2287 | if (fe1) |
| 2288 | fe1->dvb.frontend->callback = cx23885_tuner_callback; |
| 2289 | #if 0 |
| 2290 | /* Ensure all frontends negotiate bus access */ |
| 2291 | fe0->dvb.frontend->ops.ts_bus_ctrl = cx23885_dvb_bus_ctrl; |
| 2292 | if (fe1) |
| 2293 | fe1->dvb.frontend->ops.ts_bus_ctrl = cx23885_dvb_bus_ctrl; |
| 2294 | #endif |
| 2295 | |
| 2296 | /* Put the analog decoder in standby to keep it quiet */ |
| 2297 | call_all(dev, core, s_power, 0); |
| 2298 | |
| 2299 | if (fe0->dvb.frontend->ops.analog_ops.standby) |
| 2300 | fe0->dvb.frontend->ops.analog_ops.standby(fe0->dvb.frontend); |
| 2301 | |
| 2302 | /* register everything */ |
| 2303 | ret = vb2_dvb_register_bus(&port->frontends, THIS_MODULE, port, |
| 2304 | &dev->pci->dev, NULL, |
| 2305 | adapter_nr, mfe_shared); |
| 2306 | if (ret) |
| 2307 | goto frontend_detach; |
| 2308 | |
| 2309 | ret = dvb_register_ci_mac(port); |
| 2310 | if (ret) |
| 2311 | goto frontend_detach; |
| 2312 | |
| 2313 | return 0; |
| 2314 | |
| 2315 | frontend_detach: |
| 2316 | /* remove I2C client for SEC */ |
| 2317 | client_sec = port->i2c_client_sec; |
| 2318 | if (client_sec) { |
| 2319 | module_put(client_sec->dev.driver->owner); |
| 2320 | i2c_unregister_device(client_sec); |
| 2321 | port->i2c_client_sec = NULL; |
| 2322 | } |
| 2323 | |
| 2324 | /* remove I2C client for tuner */ |
| 2325 | client_tuner = port->i2c_client_tuner; |
| 2326 | if (client_tuner) { |
| 2327 | module_put(client_tuner->dev.driver->owner); |
| 2328 | i2c_unregister_device(client_tuner); |
| 2329 | port->i2c_client_tuner = NULL; |
| 2330 | } |
| 2331 | |
| 2332 | /* remove I2C client for demodulator */ |
| 2333 | client_demod = port->i2c_client_demod; |
| 2334 | if (client_demod) { |
| 2335 | module_put(client_demod->dev.driver->owner); |
| 2336 | i2c_unregister_device(client_demod); |
| 2337 | port->i2c_client_demod = NULL; |
| 2338 | } |
| 2339 | |
| 2340 | port->gate_ctrl = NULL; |
| 2341 | vb2_dvb_dealloc_frontends(&port->frontends); |
| 2342 | return -EINVAL; |
| 2343 | } |
| 2344 | |
| 2345 | int cx23885_dvb_register(struct cx23885_tsport *port) |
| 2346 | { |
| 2347 | |
| 2348 | struct vb2_dvb_frontend *fe0; |
| 2349 | struct cx23885_dev *dev = port->dev; |
| 2350 | int err, i; |
| 2351 | |
| 2352 | /* Here we need to allocate the correct number of frontends, |
| 2353 | * as reflected in the cards struct. The reality is that currently |
| 2354 | * no cx23885 boards support this - yet. But, if we don't modify this |
| 2355 | * code then the second frontend would never be allocated (later) |
| 2356 | * and fail with error before the attach in dvb_register(). |
| 2357 | * Without these changes we risk an OOPS later. The changes here |
| 2358 | * are for safety, and should provide a good foundation for the |
| 2359 | * future addition of any multi-frontend cx23885 based boards. |
| 2360 | */ |
| 2361 | printk(KERN_INFO "%s() allocating %d frontend(s)\n", __func__, |
| 2362 | port->num_frontends); |
| 2363 | |
| 2364 | for (i = 1; i <= port->num_frontends; i++) { |
| 2365 | struct vb2_queue *q; |
| 2366 | |
| 2367 | if (vb2_dvb_alloc_frontend( |
| 2368 | &port->frontends, i) == NULL) { |
| 2369 | printk(KERN_ERR "%s() failed to alloc\n", __func__); |
| 2370 | return -ENOMEM; |
| 2371 | } |
| 2372 | |
| 2373 | fe0 = vb2_dvb_get_frontend(&port->frontends, i); |
| 2374 | if (!fe0) |
| 2375 | return -EINVAL; |
| 2376 | |
| 2377 | dprintk(1, "%s\n", __func__); |
| 2378 | dprintk(1, " ->probed by Card=%d Name=%s, PCI %02x:%02x\n", |
| 2379 | dev->board, |
| 2380 | dev->name, |
| 2381 | dev->pci_bus, |
| 2382 | dev->pci_slot); |
| 2383 | |
| 2384 | err = -ENODEV; |
| 2385 | |
| 2386 | /* dvb stuff */ |
| 2387 | /* We have to init the queue for each frontend on a port. */ |
| 2388 | printk(KERN_INFO "%s: cx23885 based dvb card\n", dev->name); |
| 2389 | q = &fe0->dvb.dvbq; |
| 2390 | q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
| 2391 | q->io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF | VB2_READ; |
| 2392 | q->gfp_flags = GFP_DMA32; |
| 2393 | q->min_buffers_needed = 2; |
| 2394 | q->drv_priv = port; |
| 2395 | q->buf_struct_size = sizeof(struct cx23885_buffer); |
| 2396 | q->ops = &dvb_qops; |
| 2397 | q->mem_ops = &vb2_dma_sg_memops; |
| 2398 | q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; |
| 2399 | q->lock = &dev->lock; |
| 2400 | |
| 2401 | err = vb2_queue_init(q); |
| 2402 | if (err < 0) |
| 2403 | return err; |
| 2404 | } |
| 2405 | err = dvb_register(port); |
| 2406 | if (err != 0) |
| 2407 | printk(KERN_ERR "%s() dvb_register failed err = %d\n", |
| 2408 | __func__, err); |
| 2409 | |
| 2410 | return err; |
| 2411 | } |
| 2412 | |
| 2413 | int cx23885_dvb_unregister(struct cx23885_tsport *port) |
| 2414 | { |
| 2415 | struct vb2_dvb_frontend *fe0; |
| 2416 | struct i2c_client *client; |
| 2417 | |
| 2418 | /* remove I2C client for CI */ |
| 2419 | client = port->i2c_client_ci; |
| 2420 | if (client) { |
| 2421 | module_put(client->dev.driver->owner); |
| 2422 | i2c_unregister_device(client); |
| 2423 | } |
| 2424 | |
| 2425 | /* remove I2C client for SEC */ |
| 2426 | client = port->i2c_client_sec; |
| 2427 | if (client) { |
| 2428 | module_put(client->dev.driver->owner); |
| 2429 | i2c_unregister_device(client); |
| 2430 | } |
| 2431 | |
| 2432 | /* remove I2C client for tuner */ |
| 2433 | client = port->i2c_client_tuner; |
| 2434 | if (client) { |
| 2435 | module_put(client->dev.driver->owner); |
| 2436 | i2c_unregister_device(client); |
| 2437 | } |
| 2438 | |
| 2439 | /* remove I2C client for demodulator */ |
| 2440 | client = port->i2c_client_demod; |
| 2441 | if (client) { |
| 2442 | module_put(client->dev.driver->owner); |
| 2443 | i2c_unregister_device(client); |
| 2444 | } |
| 2445 | |
| 2446 | fe0 = vb2_dvb_get_frontend(&port->frontends, 1); |
| 2447 | |
| 2448 | if (fe0 && fe0->dvb.frontend) |
| 2449 | vb2_dvb_unregister_bus(&port->frontends); |
| 2450 | |
| 2451 | switch (port->dev->board) { |
| 2452 | case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: |
| 2453 | netup_ci_exit(port); |
| 2454 | break; |
| 2455 | case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: |
| 2456 | altera_ci_release(port->dev, port->nr); |
| 2457 | break; |
| 2458 | } |
| 2459 | |
| 2460 | port->gate_ctrl = NULL; |
| 2461 | |
| 2462 | return 0; |
| 2463 | } |