projects / deliverable / linux.git / blame_incremental
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (non-incremental) | history | HEAD
V4L/DVB (11922): tuner-xc2028: cleanup: better use tuner type defines
[deliverable/linux.git] / drivers / media / video / em28xx / em28xx-cards.c
... / ...
CommitLineData
1/*
2 em28xx-cards.c - driver for Empia EM2800/EM2820/2840 USB
3 video capture devices
4
5 Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it>
6 Markus Rechberger <mrechberger@gmail.com>
7 Mauro Carvalho Chehab <mchehab@infradead.org>
8 Sascha Sommer <saschasommer@freenet.de>
9
10 This program is free software; you can redistribute it and/or modify
11 it under the terms of the GNU General Public License as published by
12 the Free Software Foundation; either version 2 of the License, or
13 (at your option) any later version.
14
15 This program is distributed in the hope that it will be useful,
16 but WITHOUT ANY WARRANTY; without even the implied warranty of
17 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 GNU General Public License for more details.
19
20 You should have received a copy of the GNU General Public License
21 along with this program; if not, write to the Free Software
22 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
23 */
24
25#include <linux/init.h>
26#include <linux/module.h>
27#include <linux/delay.h>
28#include <linux/i2c.h>
29#include <linux/usb.h>
30#include <media/tuner.h>
31#include <media/msp3400.h>
32#include <media/saa7115.h>
33#include <media/tvp5150.h>
34#include <media/tvaudio.h>
35#include <media/i2c-addr.h>
36#include <media/tveeprom.h>
37#include <media/v4l2-common.h>
38#include <media/v4l2-chip-ident.h>
39
40#include "em28xx.h"
41
42#define DRIVER_NAME "em28xx"
43
44static int tuner = -1;
45module_param(tuner, int, 0444);
46MODULE_PARM_DESC(tuner, "tuner type");
47
48static unsigned int disable_ir;
49module_param(disable_ir, int, 0444);
50MODULE_PARM_DESC(disable_ir, "disable infrared remote support");
51
52static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET };
53module_param_array(card, int, NULL, 0444);
54MODULE_PARM_DESC(card, "card type");
55
56/* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS */
57static unsigned long em28xx_devused;
58
59struct em28xx_hash_table {
60 unsigned long hash;
61 unsigned int model;
62 unsigned int tuner;
63};
64
65/*
66 * Reset sequences for analog/digital modes
67 */
68
69/* Reset for the most [analog] boards */
70static struct em28xx_reg_seq default_analog[] = {
71 {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
72 { -1, -1, -1, -1},
73};
74
75/* Reset for the most [digital] boards */
76static struct em28xx_reg_seq default_digital[] = {
77 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
78 { -1, -1, -1, -1},
79};
80
81/* Board Hauppauge WinTV HVR 900 analog */
82static struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = {
83 {EM28XX_R08_GPIO, 0x2d, ~EM_GPIO_4, 10},
84 {0x05, 0xff, 0x10, 10},
85 { -1, -1, -1, -1},
86};
87
88/* Board Hauppauge WinTV HVR 900 digital */
89static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = {
90 {EM28XX_R08_GPIO, 0x2e, ~EM_GPIO_4, 10},
91 {EM2880_R04_GPO, 0x04, 0x0f, 10},
92 {EM2880_R04_GPO, 0x0c, 0x0f, 10},
93 { -1, -1, -1, -1},
94};
95
96/* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
97static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = {
98 {EM28XX_R08_GPIO, 0x69, ~EM_GPIO_4, 10},
99 { -1, -1, -1, -1},
100};
101
102/* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
103
104/* Board - EM2870 Kworld 355u
105 Analog - No input analog */
106
107static struct em28xx_reg_seq kworld_330u_analog[] = {
108 {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
109 {EM2880_R04_GPO, 0x00, 0xff, 10},
110 { -1, -1, -1, -1},
111};
112
113static struct em28xx_reg_seq kworld_330u_digital[] = {
114 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
115 {EM2880_R04_GPO, 0x08, 0xff, 10},
116 { -1, -1, -1, -1},
117};
118
119/* Callback for the most boards */
120static struct em28xx_reg_seq default_tuner_gpio[] = {
121 {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10},
122 {EM28XX_R08_GPIO, 0, EM_GPIO_4, 10},
123 {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10},
124 { -1, -1, -1, -1},
125};
126
127/* Mute/unmute */
128static struct em28xx_reg_seq compro_unmute_tv_gpio[] = {
129 {EM28XX_R08_GPIO, 5, 7, 10},
130 { -1, -1, -1, -1},
131};
132
133static struct em28xx_reg_seq compro_unmute_svid_gpio[] = {
134 {EM28XX_R08_GPIO, 4, 7, 10},
135 { -1, -1, -1, -1},
136};
137
138static struct em28xx_reg_seq compro_mute_gpio[] = {
139 {EM28XX_R08_GPIO, 6, 7, 10},
140 { -1, -1, -1, -1},
141};
142
143/* Terratec AV350 */
144static struct em28xx_reg_seq terratec_av350_mute_gpio[] = {
145 {EM28XX_R08_GPIO, 0xff, 0x7f, 10},
146 { -1, -1, -1, -1},
147};
148
149static struct em28xx_reg_seq terratec_av350_unmute_gpio[] = {
150 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
151 { -1, -1, -1, -1},
152};
153/*
154 * Board definitions
155 */
156struct em28xx_board em28xx_boards[] = {
157 [EM2750_BOARD_UNKNOWN] = {
158 .name = "Unknown EM2750/EM2751 webcam grabber",
159 .xclk = EM28XX_XCLK_FREQUENCY_48MHZ,
160 .tuner_type = TUNER_ABSENT, /* This is a webcam */
161 .input = { {
162 .type = EM28XX_VMUX_COMPOSITE1,
163 .vmux = 0,
164 .amux = EM28XX_AMUX_VIDEO,
165 } },
166 },
167 [EM2800_BOARD_UNKNOWN] = {
168 .name = "Unknown EM2800 video grabber",
169 .is_em2800 = 1,
170 .tda9887_conf = TDA9887_PRESENT,
171 .decoder = EM28XX_SAA711X,
172 .tuner_type = TUNER_ABSENT,
173 .input = { {
174 .type = EM28XX_VMUX_COMPOSITE1,
175 .vmux = SAA7115_COMPOSITE0,
176 .amux = EM28XX_AMUX_LINE_IN,
177 }, {
178 .type = EM28XX_VMUX_SVIDEO,
179 .vmux = SAA7115_SVIDEO3,
180 .amux = EM28XX_AMUX_LINE_IN,
181 } },
182 },
183 [EM2820_BOARD_UNKNOWN] = {
184 .name = "Unknown EM2750/28xx video grabber",
185 .tuner_type = TUNER_ABSENT,
186 },
187 [EM2750_BOARD_DLCW_130] = {
188 /* Beijing Huaqi Information Digital Technology Co., Ltd */
189 .name = "Huaqi DLCW-130",
190 .valid = EM28XX_BOARD_NOT_VALIDATED,
191 .xclk = EM28XX_XCLK_FREQUENCY_48MHZ,
192 .tuner_type = TUNER_ABSENT, /* This is a webcam */
193 .input = { {
194 .type = EM28XX_VMUX_COMPOSITE1,
195 .vmux = 0,
196 .amux = EM28XX_AMUX_VIDEO,
197 } },
198 },
199 [EM2820_BOARD_KWORLD_PVRTV2800RF] = {
200 .name = "Kworld PVR TV 2800 RF",
201 .tuner_type = TUNER_TEMIC_PAL,
202 .tda9887_conf = TDA9887_PRESENT,
203 .decoder = EM28XX_SAA711X,
204 .input = { {
205 .type = EM28XX_VMUX_COMPOSITE1,
206 .vmux = SAA7115_COMPOSITE0,
207 .amux = EM28XX_AMUX_LINE_IN,
208 }, {
209 .type = EM28XX_VMUX_SVIDEO,
210 .vmux = SAA7115_SVIDEO3,
211 .amux = EM28XX_AMUX_LINE_IN,
212 } },
213 },
214 [EM2820_BOARD_GADMEI_TVR200] = {
215 .name = "Gadmei TVR200",
216 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
217 .tda9887_conf = TDA9887_PRESENT,
218 .decoder = EM28XX_SAA711X,
219 .input = { {
220 .type = EM28XX_VMUX_TELEVISION,
221 .vmux = SAA7115_COMPOSITE2,
222 .amux = EM28XX_AMUX_LINE_IN,
223 }, {
224 .type = EM28XX_VMUX_COMPOSITE1,
225 .vmux = SAA7115_COMPOSITE0,
226 .amux = EM28XX_AMUX_LINE_IN,
227 }, {
228 .type = EM28XX_VMUX_SVIDEO,
229 .vmux = SAA7115_SVIDEO3,
230 .amux = EM28XX_AMUX_LINE_IN,
231 } },
232 },
233 [EM2820_BOARD_TERRATEC_CINERGY_250] = {
234 .name = "Terratec Cinergy 250 USB",
235 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
236 .tda9887_conf = TDA9887_PRESENT,
237 .decoder = EM28XX_SAA711X,
238 .input = { {
239 .type = EM28XX_VMUX_TELEVISION,
240 .vmux = SAA7115_COMPOSITE2,
241 .amux = EM28XX_AMUX_LINE_IN,
242 }, {
243 .type = EM28XX_VMUX_COMPOSITE1,
244 .vmux = SAA7115_COMPOSITE0,
245 .amux = EM28XX_AMUX_LINE_IN,
246 }, {
247 .type = EM28XX_VMUX_SVIDEO,
248 .vmux = SAA7115_SVIDEO3,
249 .amux = EM28XX_AMUX_LINE_IN,
250 } },
251 },
252 [EM2820_BOARD_PINNACLE_USB_2] = {
253 .name = "Pinnacle PCTV USB 2",
254 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
255 .tda9887_conf = TDA9887_PRESENT,
256 .decoder = EM28XX_SAA711X,
257 .input = { {
258 .type = EM28XX_VMUX_TELEVISION,
259 .vmux = SAA7115_COMPOSITE2,
260 .amux = EM28XX_AMUX_VIDEO,
261 }, {
262 .type = EM28XX_VMUX_COMPOSITE1,
263 .vmux = SAA7115_COMPOSITE0,
264 .amux = EM28XX_AMUX_LINE_IN,
265 }, {
266 .type = EM28XX_VMUX_SVIDEO,
267 .vmux = SAA7115_SVIDEO3,
268 .amux = EM28XX_AMUX_LINE_IN,
269 } },
270 },
271 [EM2820_BOARD_HAUPPAUGE_WINTV_USB_2] = {
272 .name = "Hauppauge WinTV USB 2",
273 .tuner_type = TUNER_PHILIPS_FM1236_MK3,
274 .tda9887_conf = TDA9887_PRESENT |
275 TDA9887_PORT1_ACTIVE |
276 TDA9887_PORT2_ACTIVE,
277 .decoder = EM28XX_TVP5150,
278 .has_msp34xx = 1,
279 .input = { {
280 .type = EM28XX_VMUX_TELEVISION,
281 .vmux = TVP5150_COMPOSITE0,
282 .amux = MSP_INPUT_DEFAULT,
283 }, {
284 .type = EM28XX_VMUX_SVIDEO,
285 .vmux = TVP5150_SVIDEO,
286 .amux = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1,
287 MSP_DSP_IN_SCART, MSP_DSP_IN_SCART),
288 } },
289 },
290 [EM2820_BOARD_DLINK_USB_TV] = {
291 .name = "D-Link DUB-T210 TV Tuner",
292 .valid = EM28XX_BOARD_NOT_VALIDATED,
293 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
294 .tda9887_conf = TDA9887_PRESENT,
295 .decoder = EM28XX_SAA711X,
296 .input = { {
297 .type = EM28XX_VMUX_TELEVISION,
298 .vmux = SAA7115_COMPOSITE2,
299 .amux = EM28XX_AMUX_LINE_IN,
300 }, {
301 .type = EM28XX_VMUX_COMPOSITE1,
302 .vmux = SAA7115_COMPOSITE0,
303 .amux = EM28XX_AMUX_LINE_IN,
304 }, {
305 .type = EM28XX_VMUX_SVIDEO,
306 .vmux = SAA7115_SVIDEO3,
307 .amux = EM28XX_AMUX_LINE_IN,
308 } },
309 },
310 [EM2820_BOARD_HERCULES_SMART_TV_USB2] = {
311 .name = "Hercules Smart TV USB 2.0",
312 .valid = EM28XX_BOARD_NOT_VALIDATED,
313 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
314 .tda9887_conf = TDA9887_PRESENT,
315 .decoder = EM28XX_SAA711X,
316 .input = { {
317 .type = EM28XX_VMUX_TELEVISION,
318 .vmux = SAA7115_COMPOSITE2,
319 .amux = EM28XX_AMUX_LINE_IN,
320 }, {
321 .type = EM28XX_VMUX_COMPOSITE1,
322 .vmux = SAA7115_COMPOSITE0,
323 .amux = EM28XX_AMUX_LINE_IN,
324 }, {
325 .type = EM28XX_VMUX_SVIDEO,
326 .vmux = SAA7115_SVIDEO3,
327 .amux = EM28XX_AMUX_LINE_IN,
328 } },
329 },
330 [EM2820_BOARD_PINNACLE_USB_2_FM1216ME] = {
331 .name = "Pinnacle PCTV USB 2 (Philips FM1216ME)",
332 .valid = EM28XX_BOARD_NOT_VALIDATED,
333 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
334 .tda9887_conf = TDA9887_PRESENT,
335 .decoder = EM28XX_SAA711X,
336 .input = { {
337 .type = EM28XX_VMUX_TELEVISION,
338 .vmux = SAA7115_COMPOSITE2,
339 .amux = EM28XX_AMUX_VIDEO,
340 }, {
341 .type = EM28XX_VMUX_COMPOSITE1,
342 .vmux = SAA7115_COMPOSITE0,
343 .amux = EM28XX_AMUX_LINE_IN,
344 }, {
345 .type = EM28XX_VMUX_SVIDEO,
346 .vmux = SAA7115_SVIDEO3,
347 .amux = EM28XX_AMUX_LINE_IN,
348 } },
349 },
350 [EM2820_BOARD_GADMEI_UTV310] = {
351 .name = "Gadmei UTV310",
352 .valid = EM28XX_BOARD_NOT_VALIDATED,
353 .tuner_type = TUNER_TNF_5335MF,
354 .tda9887_conf = TDA9887_PRESENT,
355 .decoder = EM28XX_SAA711X,
356 .input = { {
357 .type = EM28XX_VMUX_TELEVISION,
358 .vmux = SAA7115_COMPOSITE1,
359 .amux = EM28XX_AMUX_LINE_IN,
360 }, {
361 .type = EM28XX_VMUX_COMPOSITE1,
362 .vmux = SAA7115_COMPOSITE0,
363 .amux = EM28XX_AMUX_LINE_IN,
364 }, {
365 .type = EM28XX_VMUX_SVIDEO,
366 .vmux = SAA7115_SVIDEO3,
367 .amux = EM28XX_AMUX_LINE_IN,
368 } },
369 },
370 [EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE] = {
371 .name = "Leadtek Winfast USB II Deluxe",
372 .valid = EM28XX_BOARD_NOT_VALIDATED,
373 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
374 .tda9887_conf = TDA9887_PRESENT,
375 .decoder = EM28XX_SAA711X,
376 .input = { {
377 .type = EM28XX_VMUX_TELEVISION,
378 .vmux = SAA7115_COMPOSITE2,
379 .amux = EM28XX_AMUX_VIDEO,
380 }, {
381 .type = EM28XX_VMUX_COMPOSITE1,
382 .vmux = SAA7115_COMPOSITE0,
383 .amux = EM28XX_AMUX_LINE_IN,
384 }, {
385 .type = EM28XX_VMUX_SVIDEO,
386 .vmux = SAA7115_COMPOSITE0,
387 .amux = EM28XX_AMUX_LINE_IN,
388 } },
389 },
390 [EM2820_BOARD_VIDEOLOGY_20K14XUSB] = {
391 .name = "Videology 20K14XUSB USB2.0",
392 .valid = EM28XX_BOARD_NOT_VALIDATED,
393 .tuner_type = TUNER_ABSENT, /* This is a webcam */
394 .input = { {
395 .type = EM28XX_VMUX_COMPOSITE1,
396 .vmux = 0,
397 .amux = EM28XX_AMUX_VIDEO,
398 } },
399 },
400 [EM2821_BOARD_SUPERCOMP_USB_2] = {
401 .name = "Supercomp USB 2.0 TV",
402 .valid = EM28XX_BOARD_NOT_VALIDATED,
403 .tuner_type = TUNER_PHILIPS_FM1236_MK3,
404 .tda9887_conf = TDA9887_PRESENT |
405 TDA9887_PORT1_ACTIVE |
406 TDA9887_PORT2_ACTIVE,
407 .decoder = EM28XX_SAA711X,
408 .input = { {
409 .type = EM28XX_VMUX_TELEVISION,
410 .vmux = SAA7115_COMPOSITE2,
411 .amux = EM28XX_AMUX_LINE_IN,
412 }, {
413 .type = EM28XX_VMUX_COMPOSITE1,
414 .vmux = SAA7115_COMPOSITE0,
415 .amux = EM28XX_AMUX_VIDEO,
416 }, {
417 .type = EM28XX_VMUX_SVIDEO,
418 .vmux = SAA7115_SVIDEO3,
419 .amux = EM28XX_AMUX_LINE_IN,
420 } },
421 },
422 [EM2821_BOARD_USBGEAR_VD204] = {
423 .name = "Usbgear VD204v9",
424 .valid = EM28XX_BOARD_NOT_VALIDATED,
425 .tuner_type = TUNER_ABSENT, /* Capture only device */
426 .decoder = EM28XX_SAA711X,
427 .input = { {
428 .type = EM28XX_VMUX_COMPOSITE1,
429 .vmux = SAA7115_COMPOSITE0,
430 .amux = EM28XX_AMUX_LINE_IN,
431 }, {
432 .type = EM28XX_VMUX_SVIDEO,
433 .vmux = SAA7115_SVIDEO3,
434 .amux = EM28XX_AMUX_LINE_IN,
435 } },
436 },
437 [EM2860_BOARD_NETGMBH_CAM] = {
438 /* Beijing Huaqi Information Digital Technology Co., Ltd */
439 .name = "NetGMBH Cam",
440 .valid = EM28XX_BOARD_NOT_VALIDATED,
441 .tuner_type = TUNER_ABSENT, /* This is a webcam */
442 .input = { {
443 .type = EM28XX_VMUX_COMPOSITE1,
444 .vmux = 0,
445 .amux = EM28XX_AMUX_VIDEO,
446 } },
447 },
448 [EM2860_BOARD_TYPHOON_DVD_MAKER] = {
449 .name = "Typhoon DVD Maker",
450 .decoder = EM28XX_SAA711X,
451 .tuner_type = TUNER_ABSENT, /* Capture only device */
452 .input = { {
453 .type = EM28XX_VMUX_COMPOSITE1,
454 .vmux = SAA7115_COMPOSITE0,
455 .amux = EM28XX_AMUX_LINE_IN,
456 }, {
457 .type = EM28XX_VMUX_SVIDEO,
458 .vmux = SAA7115_SVIDEO3,
459 .amux = EM28XX_AMUX_LINE_IN,
460 } },
461 },
462 [EM2860_BOARD_GADMEI_UTV330] = {
463 .name = "Gadmei UTV330",
464 .valid = EM28XX_BOARD_NOT_VALIDATED,
465 .tuner_type = TUNER_TNF_5335MF,
466 .tda9887_conf = TDA9887_PRESENT,
467 .decoder = EM28XX_SAA711X,
468 .input = { {
469 .type = EM28XX_VMUX_TELEVISION,
470 .vmux = SAA7115_COMPOSITE2,
471 .amux = EM28XX_AMUX_VIDEO,
472 }, {
473 .type = EM28XX_VMUX_COMPOSITE1,
474 .vmux = SAA7115_COMPOSITE0,
475 .amux = EM28XX_AMUX_LINE_IN,
476 }, {
477 .type = EM28XX_VMUX_SVIDEO,
478 .vmux = SAA7115_SVIDEO3,
479 .amux = EM28XX_AMUX_LINE_IN,
480 } },
481 },
482 [EM2860_BOARD_TERRATEC_HYBRID_XS] = {
483 .name = "Terratec Cinergy A Hybrid XS",
484 .valid = EM28XX_BOARD_NOT_VALIDATED,
485 .tuner_type = TUNER_XC2028,
486 .tuner_gpio = default_tuner_gpio,
487 .decoder = EM28XX_TVP5150,
488
489 .input = { {
490 .type = EM28XX_VMUX_TELEVISION,
491 .vmux = TVP5150_COMPOSITE0,
492 .amux = EM28XX_AMUX_VIDEO,
493 .gpio = hauppauge_wintv_hvr_900_analog,
494 }, {
495 .type = EM28XX_VMUX_COMPOSITE1,
496 .vmux = TVP5150_COMPOSITE1,
497 .amux = EM28XX_AMUX_LINE_IN,
498 .gpio = hauppauge_wintv_hvr_900_analog,
499 }, {
500 .type = EM28XX_VMUX_SVIDEO,
501 .vmux = TVP5150_SVIDEO,
502 .amux = EM28XX_AMUX_LINE_IN,
503 .gpio = hauppauge_wintv_hvr_900_analog,
504 } },
505 },
506 [EM2861_BOARD_KWORLD_PVRTV_300U] = {
507 .name = "KWorld PVRTV 300U",
508 .valid = EM28XX_BOARD_NOT_VALIDATED,
509 .tuner_type = TUNER_XC2028,
510 .tuner_gpio = default_tuner_gpio,
511 .decoder = EM28XX_TVP5150,
512 .input = { {
513 .type = EM28XX_VMUX_TELEVISION,
514 .vmux = TVP5150_COMPOSITE0,
515 .amux = EM28XX_AMUX_VIDEO,
516 }, {
517 .type = EM28XX_VMUX_COMPOSITE1,
518 .vmux = TVP5150_COMPOSITE1,
519 .amux = EM28XX_AMUX_LINE_IN,
520 }, {
521 .type = EM28XX_VMUX_SVIDEO,
522 .vmux = TVP5150_SVIDEO,
523 .amux = EM28XX_AMUX_LINE_IN,
524 } },
525 },
526 [EM2861_BOARD_YAKUMO_MOVIE_MIXER] = {
527 .name = "Yakumo MovieMixer",
528 .tuner_type = TUNER_ABSENT, /* Capture only device */
529 .decoder = EM28XX_TVP5150,
530 .input = { {
531 .type = EM28XX_VMUX_TELEVISION,
532 .vmux = TVP5150_COMPOSITE0,
533 .amux = EM28XX_AMUX_VIDEO,
534 }, {
535 .type = EM28XX_VMUX_COMPOSITE1,
536 .vmux = TVP5150_COMPOSITE1,
537 .amux = EM28XX_AMUX_LINE_IN,
538 }, {
539 .type = EM28XX_VMUX_SVIDEO,
540 .vmux = TVP5150_SVIDEO,
541 .amux = EM28XX_AMUX_LINE_IN,
542 } },
543 },
544 [EM2861_BOARD_PLEXTOR_PX_TV100U] = {
545 .name = "Plextor ConvertX PX-TV100U",
546 .valid = EM28XX_BOARD_NOT_VALIDATED,
547 .tuner_type = TUNER_TNF_5335MF,
548 .tda9887_conf = TDA9887_PRESENT,
549 .decoder = EM28XX_TVP5150,
550 .input = { {
551 .type = EM28XX_VMUX_TELEVISION,
552 .vmux = TVP5150_COMPOSITE0,
553 .amux = EM28XX_AMUX_LINE_IN,
554 }, {
555 .type = EM28XX_VMUX_COMPOSITE1,
556 .vmux = TVP5150_COMPOSITE1,
557 .amux = EM28XX_AMUX_LINE_IN,
558 }, {
559 .type = EM28XX_VMUX_SVIDEO,
560 .vmux = TVP5150_SVIDEO,
561 .amux = EM28XX_AMUX_LINE_IN,
562 } },
563 },
564
565 /* Those boards with em2870 are DVB Only*/
566
567 [EM2870_BOARD_TERRATEC_XS] = {
568 .name = "Terratec Cinergy T XS",
569 .valid = EM28XX_BOARD_NOT_VALIDATED,
570 .tuner_type = TUNER_XC2028,
571 .tuner_gpio = default_tuner_gpio,
572 },
573 [EM2870_BOARD_TERRATEC_XS_MT2060] = {
574 .name = "Terratec Cinergy T XS (MT2060)",
575 .valid = EM28XX_BOARD_NOT_VALIDATED,
576 .tuner_type = TUNER_ABSENT, /* MT2060 */
577 },
578 [EM2870_BOARD_KWORLD_350U] = {
579 .name = "Kworld 350 U DVB-T",
580 .valid = EM28XX_BOARD_NOT_VALIDATED,
581 .tuner_type = TUNER_XC2028,
582 .tuner_gpio = default_tuner_gpio,
583 },
584 [EM2870_BOARD_KWORLD_355U] = {
585 .name = "Kworld 355 U DVB-T",
586 .valid = EM28XX_BOARD_NOT_VALIDATED,
587 },
588 [EM2870_BOARD_PINNACLE_PCTV_DVB] = {
589 .name = "Pinnacle PCTV DVB-T",
590 .valid = EM28XX_BOARD_NOT_VALIDATED,
591 .tuner_type = TUNER_ABSENT, /* MT2060 */
592 /* djh - I have serious doubts this is right... */
593 .xclk = EM28XX_XCLK_IR_RC5_MODE |
594 EM28XX_XCLK_FREQUENCY_10MHZ,
595 },
596 [EM2870_BOARD_COMPRO_VIDEOMATE] = {
597 .name = "Compro, VideoMate U3",
598 .valid = EM28XX_BOARD_NOT_VALIDATED,
599 .tuner_type = TUNER_ABSENT, /* MT2060 */
600 },
601
602 [EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = {
603 .name = "Terratec Hybrid XS Secam",
604 .valid = EM28XX_BOARD_NOT_VALIDATED,
605 .has_msp34xx = 1,
606 .tuner_type = TUNER_XC2028,
607 .tuner_gpio = default_tuner_gpio,
608 .decoder = EM28XX_TVP5150,
609 .input = { {
610 .type = EM28XX_VMUX_TELEVISION,
611 .vmux = TVP5150_COMPOSITE0,
612 .amux = EM28XX_AMUX_VIDEO,
613 .gpio = default_analog,
614 }, {
615 .type = EM28XX_VMUX_COMPOSITE1,
616 .vmux = TVP5150_COMPOSITE1,
617 .amux = EM28XX_AMUX_LINE_IN,
618 .gpio = default_analog,
619 }, {
620 .type = EM28XX_VMUX_SVIDEO,
621 .vmux = TVP5150_SVIDEO,
622 .amux = EM28XX_AMUX_LINE_IN,
623 .gpio = default_analog,
624 } },
625 },
626 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = {
627 .name = "Hauppauge WinTV HVR 900",
628 .tda9887_conf = TDA9887_PRESENT,
629 .tuner_type = TUNER_XC2028,
630 .tuner_gpio = default_tuner_gpio,
631 .mts_firmware = 1,
632 .has_dvb = 1,
633 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
634 .ir_codes = ir_codes_hauppauge_new,
635 .decoder = EM28XX_TVP5150,
636 .input = { {
637 .type = EM28XX_VMUX_TELEVISION,
638 .vmux = TVP5150_COMPOSITE0,
639 .amux = EM28XX_AMUX_VIDEO,
640 .gpio = hauppauge_wintv_hvr_900_analog,
641 }, {
642 .type = EM28XX_VMUX_COMPOSITE1,
643 .vmux = TVP5150_COMPOSITE1,
644 .amux = EM28XX_AMUX_LINE_IN,
645 .gpio = hauppauge_wintv_hvr_900_analog,
646 }, {
647 .type = EM28XX_VMUX_SVIDEO,
648 .vmux = TVP5150_SVIDEO,
649 .amux = EM28XX_AMUX_LINE_IN,
650 .gpio = hauppauge_wintv_hvr_900_analog,
651 } },
652 },
653 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = {
654 .name = "Hauppauge WinTV HVR 900 (R2)",
655 .tda9887_conf = TDA9887_PRESENT,
656 .tuner_type = TUNER_XC2028,
657 .tuner_gpio = default_tuner_gpio,
658 .mts_firmware = 1,
659 .ir_codes = ir_codes_hauppauge_new,
660 .decoder = EM28XX_TVP5150,
661 .input = { {
662 .type = EM28XX_VMUX_TELEVISION,
663 .vmux = TVP5150_COMPOSITE0,
664 .amux = EM28XX_AMUX_VIDEO,
665 .gpio = hauppauge_wintv_hvr_900_analog,
666 }, {
667 .type = EM28XX_VMUX_COMPOSITE1,
668 .vmux = TVP5150_COMPOSITE1,
669 .amux = EM28XX_AMUX_LINE_IN,
670 .gpio = hauppauge_wintv_hvr_900_analog,
671 }, {
672 .type = EM28XX_VMUX_SVIDEO,
673 .vmux = TVP5150_SVIDEO,
674 .amux = EM28XX_AMUX_LINE_IN,
675 .gpio = hauppauge_wintv_hvr_900_analog,
676 } },
677 },
678 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850] = {
679 .name = "Hauppauge WinTV HVR 850",
680 .tuner_type = TUNER_XC2028,
681 .tuner_gpio = default_tuner_gpio,
682 .mts_firmware = 1,
683 .has_dvb = 1,
684 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
685 .ir_codes = ir_codes_hauppauge_new,
686 .decoder = EM28XX_TVP5150,
687 .input = { {
688 .type = EM28XX_VMUX_TELEVISION,
689 .vmux = TVP5150_COMPOSITE0,
690 .amux = EM28XX_AMUX_VIDEO,
691 .gpio = hauppauge_wintv_hvr_900_analog,
692 }, {
693 .type = EM28XX_VMUX_COMPOSITE1,
694 .vmux = TVP5150_COMPOSITE1,
695 .amux = EM28XX_AMUX_LINE_IN,
696 .gpio = hauppauge_wintv_hvr_900_analog,
697 }, {
698 .type = EM28XX_VMUX_SVIDEO,
699 .vmux = TVP5150_SVIDEO,
700 .amux = EM28XX_AMUX_LINE_IN,
701 .gpio = hauppauge_wintv_hvr_900_analog,
702 } },
703 },
704 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = {
705 .name = "Hauppauge WinTV HVR 950",
706 .tuner_type = TUNER_XC2028,
707 .tuner_gpio = default_tuner_gpio,
708 .mts_firmware = 1,
709 .has_dvb = 1,
710 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
711 .ir_codes = ir_codes_hauppauge_new,
712 .decoder = EM28XX_TVP5150,
713 .input = { {
714 .type = EM28XX_VMUX_TELEVISION,
715 .vmux = TVP5150_COMPOSITE0,
716 .amux = EM28XX_AMUX_VIDEO,
717 .gpio = hauppauge_wintv_hvr_900_analog,
718 }, {
719 .type = EM28XX_VMUX_COMPOSITE1,
720 .vmux = TVP5150_COMPOSITE1,
721 .amux = EM28XX_AMUX_LINE_IN,
722 .gpio = hauppauge_wintv_hvr_900_analog,
723 }, {
724 .type = EM28XX_VMUX_SVIDEO,
725 .vmux = TVP5150_SVIDEO,
726 .amux = EM28XX_AMUX_LINE_IN,
727 .gpio = hauppauge_wintv_hvr_900_analog,
728 } },
729 },
730 [EM2880_BOARD_PINNACLE_PCTV_HD_PRO] = {
731 .name = "Pinnacle PCTV HD Pro Stick",
732 .tuner_type = TUNER_XC2028,
733 .tuner_gpio = default_tuner_gpio,
734 .mts_firmware = 1,
735 .has_dvb = 1,
736 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
737 .ir_codes = ir_codes_pinnacle_pctv_hd,
738 .decoder = EM28XX_TVP5150,
739 .input = { {
740 .type = EM28XX_VMUX_TELEVISION,
741 .vmux = TVP5150_COMPOSITE0,
742 .amux = EM28XX_AMUX_VIDEO,
743 .gpio = hauppauge_wintv_hvr_900_analog,
744 }, {
745 .type = EM28XX_VMUX_COMPOSITE1,
746 .vmux = TVP5150_COMPOSITE1,
747 .amux = EM28XX_AMUX_LINE_IN,
748 .gpio = hauppauge_wintv_hvr_900_analog,
749 }, {
750 .type = EM28XX_VMUX_SVIDEO,
751 .vmux = TVP5150_SVIDEO,
752 .amux = EM28XX_AMUX_LINE_IN,
753 .gpio = hauppauge_wintv_hvr_900_analog,
754 } },
755 },
756 [EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = {
757 .name = "AMD ATI TV Wonder HD 600",
758 .tuner_type = TUNER_XC2028,
759 .tuner_gpio = default_tuner_gpio,
760 .mts_firmware = 1,
761 .has_dvb = 1,
762 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
763 .ir_codes = ir_codes_ati_tv_wonder_hd_600,
764 .decoder = EM28XX_TVP5150,
765 .input = { {
766 .type = EM28XX_VMUX_TELEVISION,
767 .vmux = TVP5150_COMPOSITE0,
768 .amux = EM28XX_AMUX_VIDEO,
769 .gpio = hauppauge_wintv_hvr_900_analog,
770 }, {
771 .type = EM28XX_VMUX_COMPOSITE1,
772 .vmux = TVP5150_COMPOSITE1,
773 .amux = EM28XX_AMUX_LINE_IN,
774 .gpio = hauppauge_wintv_hvr_900_analog,
775 }, {
776 .type = EM28XX_VMUX_SVIDEO,
777 .vmux = TVP5150_SVIDEO,
778 .amux = EM28XX_AMUX_LINE_IN,
779 .gpio = hauppauge_wintv_hvr_900_analog,
780 } },
781 },
782 [EM2880_BOARD_TERRATEC_HYBRID_XS] = {
783 .name = "Terratec Hybrid XS",
784 .tuner_type = TUNER_XC2028,
785 .tuner_gpio = default_tuner_gpio,
786 .decoder = EM28XX_TVP5150,
787 .has_dvb = 1,
788 .dvb_gpio = default_analog,
789 .input = { {
790 .type = EM28XX_VMUX_TELEVISION,
791 .vmux = TVP5150_COMPOSITE0,
792 .amux = EM28XX_AMUX_VIDEO,
793 .gpio = default_analog,
794 }, {
795 .type = EM28XX_VMUX_COMPOSITE1,
796 .vmux = TVP5150_COMPOSITE1,
797 .amux = EM28XX_AMUX_LINE_IN,
798 .gpio = default_analog,
799 }, {
800 .type = EM28XX_VMUX_SVIDEO,
801 .vmux = TVP5150_SVIDEO,
802 .amux = EM28XX_AMUX_LINE_IN,
803 .gpio = default_analog,
804 } },
805 },
806 /* maybe there's a reason behind it why Terratec sells the Hybrid XS
807 as Prodigy XS with a different PID, let's keep it separated for now
808 maybe we'll need it lateron */
809 [EM2880_BOARD_TERRATEC_PRODIGY_XS] = {
810 .name = "Terratec Prodigy XS",
811 .tuner_type = TUNER_XC2028,
812 .tuner_gpio = default_tuner_gpio,
813 .decoder = EM28XX_TVP5150,
814 .input = { {
815 .type = EM28XX_VMUX_TELEVISION,
816 .vmux = TVP5150_COMPOSITE0,
817 .amux = EM28XX_AMUX_VIDEO,
818 .gpio = hauppauge_wintv_hvr_900_analog,
819 }, {
820 .type = EM28XX_VMUX_COMPOSITE1,
821 .vmux = TVP5150_COMPOSITE1,
822 .amux = EM28XX_AMUX_LINE_IN,
823 .gpio = hauppauge_wintv_hvr_900_analog,
824 }, {
825 .type = EM28XX_VMUX_SVIDEO,
826 .vmux = TVP5150_SVIDEO,
827 .amux = EM28XX_AMUX_LINE_IN,
828 .gpio = hauppauge_wintv_hvr_900_analog,
829 } },
830 },
831 [EM2820_BOARD_MSI_VOX_USB_2] = {
832 .name = "MSI VOX USB 2.0",
833 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
834 .tda9887_conf = TDA9887_PRESENT |
835 TDA9887_PORT1_ACTIVE |
836 TDA9887_PORT2_ACTIVE,
837 .max_range_640_480 = 1,
838 .decoder = EM28XX_SAA711X,
839 .input = { {
840 .type = EM28XX_VMUX_TELEVISION,
841 .vmux = SAA7115_COMPOSITE4,
842 .amux = EM28XX_AMUX_VIDEO,
843 }, {
844 .type = EM28XX_VMUX_COMPOSITE1,
845 .vmux = SAA7115_COMPOSITE0,
846 .amux = EM28XX_AMUX_LINE_IN,
847 }, {
848 .type = EM28XX_VMUX_SVIDEO,
849 .vmux = SAA7115_SVIDEO3,
850 .amux = EM28XX_AMUX_LINE_IN,
851 } },
852 },
853 [EM2800_BOARD_TERRATEC_CINERGY_200] = {
854 .name = "Terratec Cinergy 200 USB",
855 .is_em2800 = 1,
856 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
857 .tda9887_conf = TDA9887_PRESENT,
858 .decoder = EM28XX_SAA711X,
859 .input = { {
860 .type = EM28XX_VMUX_TELEVISION,
861 .vmux = SAA7115_COMPOSITE2,
862 .amux = EM28XX_AMUX_VIDEO,
863 }, {
864 .type = EM28XX_VMUX_COMPOSITE1,
865 .vmux = SAA7115_COMPOSITE0,
866 .amux = EM28XX_AMUX_LINE_IN,
867 }, {
868 .type = EM28XX_VMUX_SVIDEO,
869 .vmux = SAA7115_SVIDEO3,
870 .amux = EM28XX_AMUX_LINE_IN,
871 } },
872 },
873 [EM2800_BOARD_GRABBEEX_USB2800] = {
874 .name = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder",
875 .is_em2800 = 1,
876 .decoder = EM28XX_SAA711X,
877 .tuner_type = TUNER_ABSENT, /* capture only board */
878 .input = { {
879 .type = EM28XX_VMUX_COMPOSITE1,
880 .vmux = SAA7115_COMPOSITE0,
881 .amux = EM28XX_AMUX_LINE_IN,
882 }, {
883 .type = EM28XX_VMUX_SVIDEO,
884 .vmux = SAA7115_SVIDEO3,
885 .amux = EM28XX_AMUX_LINE_IN,
886 } },
887 },
888 [EM2800_BOARD_LEADTEK_WINFAST_USBII] = {
889 .name = "Leadtek Winfast USB II",
890 .is_em2800 = 1,
891 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
892 .tda9887_conf = TDA9887_PRESENT,
893 .decoder = EM28XX_SAA711X,
894 .input = { {
895 .type = EM28XX_VMUX_TELEVISION,
896 .vmux = SAA7115_COMPOSITE2,
897 .amux = EM28XX_AMUX_VIDEO,
898 }, {
899 .type = EM28XX_VMUX_COMPOSITE1,
900 .vmux = SAA7115_COMPOSITE0,
901 .amux = EM28XX_AMUX_LINE_IN,
902 }, {
903 .type = EM28XX_VMUX_SVIDEO,
904 .vmux = SAA7115_SVIDEO3,
905 .amux = EM28XX_AMUX_LINE_IN,
906 } },
907 },
908 [EM2800_BOARD_KWORLD_USB2800] = {
909 .name = "Kworld USB2800",
910 .is_em2800 = 1,
911 .tuner_type = TUNER_PHILIPS_FCV1236D,
912 .tda9887_conf = TDA9887_PRESENT,
913 .decoder = EM28XX_SAA711X,
914 .input = { {
915 .type = EM28XX_VMUX_TELEVISION,
916 .vmux = SAA7115_COMPOSITE2,
917 .amux = EM28XX_AMUX_VIDEO,
918 }, {
919 .type = EM28XX_VMUX_COMPOSITE1,
920 .vmux = SAA7115_COMPOSITE0,
921 .amux = EM28XX_AMUX_LINE_IN,
922 }, {
923 .type = EM28XX_VMUX_SVIDEO,
924 .vmux = SAA7115_SVIDEO3,
925 .amux = EM28XX_AMUX_LINE_IN,
926 } },
927 },
928 [EM2820_BOARD_PINNACLE_DVC_90] = {
929 .name = "Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker",
930 .tuner_type = TUNER_ABSENT, /* capture only board */
931 .decoder = EM28XX_SAA711X,
932 .input = { {
933 .type = EM28XX_VMUX_COMPOSITE1,
934 .vmux = SAA7115_COMPOSITE0,
935 .amux = EM28XX_AMUX_LINE_IN,
936 }, {
937 .type = EM28XX_VMUX_SVIDEO,
938 .vmux = SAA7115_SVIDEO3,
939 .amux = EM28XX_AMUX_LINE_IN,
940 } },
941 },
942 [EM2800_BOARD_VGEAR_POCKETTV] = {
943 .name = "V-Gear PocketTV",
944 .is_em2800 = 1,
945 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
946 .tda9887_conf = TDA9887_PRESENT,
947 .decoder = EM28XX_SAA711X,
948 .input = { {
949 .type = EM28XX_VMUX_TELEVISION,
950 .vmux = SAA7115_COMPOSITE2,
951 .amux = EM28XX_AMUX_VIDEO,
952 }, {
953 .type = EM28XX_VMUX_COMPOSITE1,
954 .vmux = SAA7115_COMPOSITE0,
955 .amux = EM28XX_AMUX_LINE_IN,
956 }, {
957 .type = EM28XX_VMUX_SVIDEO,
958 .vmux = SAA7115_SVIDEO3,
959 .amux = EM28XX_AMUX_LINE_IN,
960 } },
961 },
962 [EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2] = {
963 .name = "Pixelview PlayTV Box 4 USB 2.0",
964 .tda9887_conf = TDA9887_PRESENT,
965 .tuner_type = TUNER_YMEC_TVF_5533MF,
966 .decoder = EM28XX_SAA711X,
967 .input = { {
968 .type = EM28XX_VMUX_TELEVISION,
969 .vmux = SAA7115_COMPOSITE2,
970 .amux = EM28XX_AMUX_VIDEO,
971 .aout = EM28XX_AOUT_MONO | /* I2S */
972 EM28XX_AOUT_MASTER, /* Line out pin */
973 }, {
974 .type = EM28XX_VMUX_COMPOSITE1,
975 .vmux = SAA7115_COMPOSITE0,
976 .amux = EM28XX_AMUX_LINE_IN,
977 }, {
978 .type = EM28XX_VMUX_SVIDEO,
979 .vmux = SAA7115_SVIDEO3,
980 .amux = EM28XX_AMUX_LINE_IN,
981 } },
982 },
983 [EM2820_BOARD_PROLINK_PLAYTV_USB2] = {
984 .name = "SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0",
985 .has_snapshot_button = 1,
986 .tda9887_conf = TDA9887_PRESENT,
987 .tuner_type = TUNER_YMEC_TVF_5533MF,
988 .decoder = EM28XX_SAA711X,
989 .input = { {
990 .type = EM28XX_VMUX_TELEVISION,
991 .vmux = SAA7115_COMPOSITE2,
992 .amux = EM28XX_AMUX_VIDEO,
993 .aout = EM28XX_AOUT_MONO | /* I2S */
994 EM28XX_AOUT_MASTER, /* Line out pin */
995 }, {
996 .type = EM28XX_VMUX_COMPOSITE1,
997 .vmux = SAA7115_COMPOSITE0,
998 .amux = EM28XX_AMUX_LINE_IN,
999 }, {
1000 .type = EM28XX_VMUX_SVIDEO,
1001 .vmux = SAA7115_SVIDEO3,
1002 .amux = EM28XX_AMUX_LINE_IN,
1003 } },
1004 },
1005 [EM2860_BOARD_POINTNIX_INTRAORAL_CAMERA] = {
1006 .name = "PointNix Intra-Oral Camera",
1007 .has_snapshot_button = 1,
1008 .tda9887_conf = TDA9887_PRESENT,
1009 .tuner_type = TUNER_ABSENT,
1010 .decoder = EM28XX_SAA711X,
1011 .input = { {
1012 .type = EM28XX_VMUX_SVIDEO,
1013 .vmux = SAA7115_SVIDEO3,
1014 .amux = EM28XX_AMUX_VIDEO,
1015 } },
1016 },
1017 [EM2880_BOARD_MSI_DIGIVOX_AD] = {
1018 .name = "MSI DigiVox A/D",
1019 .valid = EM28XX_BOARD_NOT_VALIDATED,
1020 .tuner_type = TUNER_XC2028,
1021 .tuner_gpio = default_tuner_gpio,
1022 .decoder = EM28XX_TVP5150,
1023 .input = { {
1024 .type = EM28XX_VMUX_TELEVISION,
1025 .vmux = TVP5150_COMPOSITE0,
1026 .amux = EM28XX_AMUX_VIDEO,
1027 .gpio = em2880_msi_digivox_ad_analog,
1028 }, {
1029 .type = EM28XX_VMUX_COMPOSITE1,
1030 .vmux = TVP5150_COMPOSITE1,
1031 .amux = EM28XX_AMUX_LINE_IN,
1032 .gpio = em2880_msi_digivox_ad_analog,
1033 }, {
1034 .type = EM28XX_VMUX_SVIDEO,
1035 .vmux = TVP5150_SVIDEO,
1036 .amux = EM28XX_AMUX_LINE_IN,
1037 .gpio = em2880_msi_digivox_ad_analog,
1038 } },
1039 },
1040 [EM2880_BOARD_MSI_DIGIVOX_AD_II] = {
1041 .name = "MSI DigiVox A/D II",
1042 .valid = EM28XX_BOARD_NOT_VALIDATED,
1043 .tuner_type = TUNER_XC2028,
1044 .tuner_gpio = default_tuner_gpio,
1045 .decoder = EM28XX_TVP5150,
1046 .input = { {
1047 .type = EM28XX_VMUX_TELEVISION,
1048 .vmux = TVP5150_COMPOSITE0,
1049 .amux = EM28XX_AMUX_VIDEO,
1050 .gpio = em2880_msi_digivox_ad_analog,
1051 }, {
1052 .type = EM28XX_VMUX_COMPOSITE1,
1053 .vmux = TVP5150_COMPOSITE1,
1054 .amux = EM28XX_AMUX_LINE_IN,
1055 .gpio = em2880_msi_digivox_ad_analog,
1056 }, {
1057 .type = EM28XX_VMUX_SVIDEO,
1058 .vmux = TVP5150_SVIDEO,
1059 .amux = EM28XX_AMUX_LINE_IN,
1060 .gpio = em2880_msi_digivox_ad_analog,
1061 } },
1062 },
1063 [EM2880_BOARD_KWORLD_DVB_305U] = {
1064 .name = "KWorld DVB-T 305U",
1065 .valid = EM28XX_BOARD_NOT_VALIDATED,
1066 .tuner_type = TUNER_XC2028,
1067 .tuner_gpio = default_tuner_gpio,
1068 .decoder = EM28XX_TVP5150,
1069 .input = { {
1070 .type = EM28XX_VMUX_TELEVISION,
1071 .vmux = TVP5150_COMPOSITE0,
1072 .amux = EM28XX_AMUX_VIDEO,
1073 }, {
1074 .type = EM28XX_VMUX_COMPOSITE1,
1075 .vmux = TVP5150_COMPOSITE1,
1076 .amux = EM28XX_AMUX_LINE_IN,
1077 }, {
1078 .type = EM28XX_VMUX_SVIDEO,
1079 .vmux = TVP5150_SVIDEO,
1080 .amux = EM28XX_AMUX_LINE_IN,
1081 } },
1082 },
1083 [EM2880_BOARD_KWORLD_DVB_310U] = {
1084 .name = "KWorld DVB-T 310U",
1085 .tuner_type = TUNER_XC2028,
1086 .tuner_gpio = default_tuner_gpio,
1087 .has_dvb = 1,
1088 .dvb_gpio = default_digital,
1089 .mts_firmware = 1,
1090 .decoder = EM28XX_TVP5150,
1091 .input = { {
1092 .type = EM28XX_VMUX_TELEVISION,
1093 .vmux = TVP5150_COMPOSITE0,
1094 .amux = EM28XX_AMUX_VIDEO,
1095 .gpio = default_analog,
1096 }, {
1097 .type = EM28XX_VMUX_COMPOSITE1,
1098 .vmux = TVP5150_COMPOSITE1,
1099 .amux = EM28XX_AMUX_LINE_IN,
1100 .gpio = default_analog,
1101 }, { /* S-video has not been tested yet */
1102 .type = EM28XX_VMUX_SVIDEO,
1103 .vmux = TVP5150_SVIDEO,
1104 .amux = EM28XX_AMUX_LINE_IN,
1105 .gpio = default_analog,
1106 } },
1107 },
1108 [EM2880_BOARD_EMPIRE_DUAL_TV] = {
1109 .name = "Empire dual TV",
1110 .tuner_type = TUNER_XC2028,
1111 .tuner_gpio = default_tuner_gpio,
1112 .has_dvb = 1,
1113 .dvb_gpio = default_digital,
1114 .mts_firmware = 1,
1115 .decoder = EM28XX_TVP5150,
1116 .input = { {
1117 .type = EM28XX_VMUX_TELEVISION,
1118 .vmux = TVP5150_COMPOSITE0,
1119 .amux = EM28XX_AMUX_VIDEO,
1120 .gpio = default_analog,
1121 }, {
1122 .type = EM28XX_VMUX_COMPOSITE1,
1123 .vmux = TVP5150_COMPOSITE1,
1124 .amux = EM28XX_AMUX_LINE_IN,
1125 .gpio = default_analog,
1126 }, {
1127 .type = EM28XX_VMUX_SVIDEO,
1128 .vmux = TVP5150_SVIDEO,
1129 .amux = EM28XX_AMUX_LINE_IN,
1130 .gpio = default_analog,
1131 } },
1132 },
1133 [EM2881_BOARD_DNT_DA2_HYBRID] = {
1134 .name = "DNT DA2 Hybrid",
1135 .valid = EM28XX_BOARD_NOT_VALIDATED,
1136 .tuner_type = TUNER_XC2028,
1137 .tuner_gpio = default_tuner_gpio,
1138 .decoder = EM28XX_TVP5150,
1139 .input = { {
1140 .type = EM28XX_VMUX_TELEVISION,
1141 .vmux = TVP5150_COMPOSITE0,
1142 .amux = EM28XX_AMUX_VIDEO,
1143 .gpio = default_analog,
1144 }, {
1145 .type = EM28XX_VMUX_COMPOSITE1,
1146 .vmux = TVP5150_COMPOSITE1,
1147 .amux = EM28XX_AMUX_LINE_IN,
1148 .gpio = default_analog,
1149 }, {
1150 .type = EM28XX_VMUX_SVIDEO,
1151 .vmux = TVP5150_SVIDEO,
1152 .amux = EM28XX_AMUX_LINE_IN,
1153 .gpio = default_analog,
1154 } },
1155 },
1156 [EM2881_BOARD_PINNACLE_HYBRID_PRO] = {
1157 .name = "Pinnacle Hybrid Pro",
1158 .valid = EM28XX_BOARD_NOT_VALIDATED,
1159 .tuner_type = TUNER_XC2028,
1160 .tuner_gpio = default_tuner_gpio,
1161 .decoder = EM28XX_TVP5150,
1162 .input = { {
1163 .type = EM28XX_VMUX_TELEVISION,
1164 .vmux = TVP5150_COMPOSITE0,
1165 .amux = EM28XX_AMUX_VIDEO,
1166 .gpio = default_analog,
1167 }, {
1168 .type = EM28XX_VMUX_COMPOSITE1,
1169 .vmux = TVP5150_COMPOSITE1,
1170 .amux = EM28XX_AMUX_LINE_IN,
1171 .gpio = default_analog,
1172 }, {
1173 .type = EM28XX_VMUX_SVIDEO,
1174 .vmux = TVP5150_SVIDEO,
1175 .amux = EM28XX_AMUX_LINE_IN,
1176 .gpio = default_analog,
1177 } },
1178 },
1179 [EM2882_BOARD_PINNACLE_HYBRID_PRO] = {
1180 .name = "Pinnacle Hybrid Pro (2)",
1181 .valid = EM28XX_BOARD_NOT_VALIDATED,
1182 .tuner_type = TUNER_XC2028,
1183 .tuner_gpio = default_tuner_gpio,
1184 .mts_firmware = 1,
1185 .decoder = EM28XX_TVP5150,
1186 .input = { {
1187 .type = EM28XX_VMUX_TELEVISION,
1188 .vmux = TVP5150_COMPOSITE0,
1189 .amux = EM28XX_AMUX_VIDEO,
1190 .gpio = hauppauge_wintv_hvr_900_analog,
1191 }, {
1192 .type = EM28XX_VMUX_COMPOSITE1,
1193 .vmux = TVP5150_COMPOSITE1,
1194 .amux = EM28XX_AMUX_LINE_IN,
1195 .gpio = hauppauge_wintv_hvr_900_analog,
1196 }, {
1197 .type = EM28XX_VMUX_SVIDEO,
1198 .vmux = TVP5150_SVIDEO,
1199 .amux = EM28XX_AMUX_LINE_IN,
1200 .gpio = hauppauge_wintv_hvr_900_analog,
1201 } },
1202 },
1203 [EM2882_BOARD_KWORLD_VS_DVBT] = {
1204 .name = "Kworld VS-DVB-T 323UR",
1205 .valid = EM28XX_BOARD_NOT_VALIDATED,
1206 .tuner_type = TUNER_XC2028,
1207 .tuner_gpio = default_tuner_gpio,
1208 .decoder = EM28XX_TVP5150,
1209 .input = { {
1210 .type = EM28XX_VMUX_TELEVISION,
1211 .vmux = TVP5150_COMPOSITE0,
1212 .amux = EM28XX_AMUX_VIDEO,
1213 }, {
1214 .type = EM28XX_VMUX_COMPOSITE1,
1215 .vmux = TVP5150_COMPOSITE1,
1216 .amux = EM28XX_AMUX_LINE_IN,
1217 }, {
1218 .type = EM28XX_VMUX_SVIDEO,
1219 .vmux = TVP5150_SVIDEO,
1220 .amux = EM28XX_AMUX_LINE_IN,
1221 } },
1222 },
1223 [EM2882_BOARD_TERRATEC_HYBRID_XS] = {
1224 .name = "Terratec Hybrid XS (em2882)",
1225 .valid = EM28XX_BOARD_NOT_VALIDATED,
1226 .tuner_type = TUNER_XC2028,
1227 .tuner_gpio = default_tuner_gpio,
1228 .decoder = EM28XX_TVP5150,
1229 .input = { {
1230 .type = EM28XX_VMUX_TELEVISION,
1231 .vmux = TVP5150_COMPOSITE0,
1232 .amux = EM28XX_AMUX_VIDEO,
1233 .gpio = hauppauge_wintv_hvr_900_analog,
1234 }, {
1235 .type = EM28XX_VMUX_COMPOSITE1,
1236 .vmux = TVP5150_COMPOSITE1,
1237 .amux = EM28XX_AMUX_LINE_IN,
1238 .gpio = hauppauge_wintv_hvr_900_analog,
1239 }, {
1240 .type = EM28XX_VMUX_SVIDEO,
1241 .vmux = TVP5150_SVIDEO,
1242 .amux = EM28XX_AMUX_LINE_IN,
1243 .gpio = hauppauge_wintv_hvr_900_analog,
1244 } },
1245 },
1246 [EM2883_BOARD_KWORLD_HYBRID_330U] = {
1247 .name = "Kworld PlusTV HD Hybrid 330",
1248 .tuner_type = TUNER_XC2028,
1249 .tuner_gpio = default_tuner_gpio,
1250 .decoder = EM28XX_TVP5150,
1251 .mts_firmware = 1,
1252 .has_dvb = 1,
1253 .dvb_gpio = kworld_330u_digital,
1254 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1255 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1256 EM28XX_I2C_EEPROM_ON_BOARD |
1257 EM28XX_I2C_EEPROM_KEY_VALID,
1258 .input = { {
1259 .type = EM28XX_VMUX_TELEVISION,
1260 .vmux = TVP5150_COMPOSITE0,
1261 .amux = EM28XX_AMUX_VIDEO,
1262 .gpio = kworld_330u_analog,
1263 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1264 }, {
1265 .type = EM28XX_VMUX_COMPOSITE1,
1266 .vmux = TVP5150_COMPOSITE1,
1267 .amux = EM28XX_AMUX_LINE_IN,
1268 .gpio = kworld_330u_analog,
1269 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1270 }, {
1271 .type = EM28XX_VMUX_SVIDEO,
1272 .vmux = TVP5150_SVIDEO,
1273 .amux = EM28XX_AMUX_LINE_IN,
1274 .gpio = kworld_330u_analog,
1275 } },
1276 },
1277 [EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = {
1278 .name = "Compro VideoMate ForYou/Stereo",
1279 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1280 .tvaudio_addr = 0xb0,
1281 .tda9887_conf = TDA9887_PRESENT,
1282 .decoder = EM28XX_TVP5150,
1283 .adecoder = EM28XX_TVAUDIO,
1284 .mute_gpio = compro_mute_gpio,
1285 .input = { {
1286 .type = EM28XX_VMUX_TELEVISION,
1287 .vmux = TVP5150_COMPOSITE0,
1288 .amux = EM28XX_AMUX_VIDEO,
1289 .gpio = compro_unmute_tv_gpio,
1290 }, {
1291 .type = EM28XX_VMUX_SVIDEO,
1292 .vmux = TVP5150_SVIDEO,
1293 .amux = EM28XX_AMUX_LINE_IN,
1294 .gpio = compro_unmute_svid_gpio,
1295 } },
1296 },
1297 [EM2860_BOARD_KAIOMY_TVNPC_U2] = {
1298 .name = "Kaiomy TVnPC U2",
1299 .vchannels = 3,
1300 .tuner_type = TUNER_XC2028,
1301 .tuner_addr = 0x61,
1302 .mts_firmware = 1,
1303 .decoder = EM28XX_TVP5150,
1304 .tuner_gpio = default_tuner_gpio,
1305 .ir_codes = ir_codes_kaiomy,
1306 .input = { {
1307 .type = EM28XX_VMUX_TELEVISION,
1308 .vmux = TVP5150_COMPOSITE0,
1309 .amux = EM28XX_AMUX_VIDEO,
1310
1311 }, {
1312 .type = EM28XX_VMUX_COMPOSITE1,
1313 .vmux = TVP5150_COMPOSITE1,
1314 .amux = EM28XX_AMUX_LINE_IN,
1315 }, {
1316 .type = EM28XX_VMUX_SVIDEO,
1317 .vmux = TVP5150_SVIDEO,
1318 .amux = EM28XX_AMUX_LINE_IN,
1319 } },
1320 .radio = {
1321 .type = EM28XX_RADIO,
1322 .amux = EM28XX_AMUX_LINE_IN,
1323 }
1324 },
1325 [EM2860_BOARD_EASYCAP] = {
1326 .name = "Easy Cap Capture DC-60",
1327 .vchannels = 2,
1328 .tuner_type = TUNER_ABSENT,
1329 .decoder = EM28XX_SAA711X,
1330 .input = { {
1331 .type = EM28XX_VMUX_COMPOSITE1,
1332 .vmux = SAA7115_COMPOSITE0,
1333 .amux = EM28XX_AMUX_LINE_IN,
1334 }, {
1335 .type = EM28XX_VMUX_SVIDEO,
1336 .vmux = SAA7115_SVIDEO3,
1337 .amux = EM28XX_AMUX_LINE_IN,
1338 } },
1339 },
1340 [EM2820_BOARD_IODATA_GVMVP_SZ] = {
1341 .name = "IO-DATA GV-MVP/SZ",
1342 .tuner_type = TUNER_PHILIPS_FM1236_MK3,
1343 .tuner_gpio = default_tuner_gpio,
1344 .tda9887_conf = TDA9887_PRESENT,
1345 .decoder = EM28XX_TVP5150,
1346 .input = { {
1347 .type = EM28XX_VMUX_TELEVISION,
1348 .vmux = TVP5150_COMPOSITE0,
1349 .amux = EM28XX_AMUX_VIDEO,
1350 }, { /* Composite has not been tested yet */
1351 .type = EM28XX_VMUX_COMPOSITE1,
1352 .vmux = TVP5150_COMPOSITE1,
1353 .amux = EM28XX_AMUX_VIDEO,
1354 }, { /* S-video has not been tested yet */
1355 .type = EM28XX_VMUX_SVIDEO,
1356 .vmux = TVP5150_SVIDEO,
1357 .amux = EM28XX_AMUX_VIDEO,
1358 } },
1359 },
1360 [EM2860_BOARD_TERRATEC_GRABBY] = {
1361 .name = "Terratec Grabby",
1362 .vchannels = 2,
1363 .tuner_type = TUNER_ABSENT,
1364 .decoder = EM28XX_SAA711X,
1365 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1366 .input = { {
1367 .type = EM28XX_VMUX_COMPOSITE1,
1368 .vmux = SAA7115_COMPOSITE0,
1369 .amux = EM28XX_AMUX_VIDEO2,
1370 }, {
1371 .type = EM28XX_VMUX_SVIDEO,
1372 .vmux = SAA7115_SVIDEO3,
1373 .amux = EM28XX_AMUX_VIDEO2,
1374 } },
1375 },
1376 [EM2860_BOARD_TERRATEC_AV350] = {
1377 .name = "Terratec AV350",
1378 .vchannels = 2,
1379 .tuner_type = TUNER_ABSENT,
1380 .decoder = EM28XX_TVP5150,
1381 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1382 .mute_gpio = terratec_av350_mute_gpio,
1383 .input = { {
1384 .type = EM28XX_VMUX_COMPOSITE1,
1385 .vmux = TVP5150_COMPOSITE1,
1386 .amux = EM28XX_AUDIO_SRC_LINE,
1387 .gpio = terratec_av350_unmute_gpio,
1388
1389 }, {
1390 .type = EM28XX_VMUX_SVIDEO,
1391 .vmux = TVP5150_SVIDEO,
1392 .amux = EM28XX_AUDIO_SRC_LINE,
1393 .gpio = terratec_av350_unmute_gpio,
1394 } },
1395 },
1396};
1397const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
1398
1399/* table of devices that work with this driver */
1400struct usb_device_id em28xx_id_table[] = {
1401 { USB_DEVICE(0xeb1a, 0x2750),
1402 .driver_info = EM2750_BOARD_UNKNOWN },
1403 { USB_DEVICE(0xeb1a, 0x2751),
1404 .driver_info = EM2750_BOARD_UNKNOWN },
1405 { USB_DEVICE(0xeb1a, 0x2800),
1406 .driver_info = EM2800_BOARD_UNKNOWN },
1407 { USB_DEVICE(0xeb1a, 0x2820),
1408 .driver_info = EM2820_BOARD_UNKNOWN },
1409 { USB_DEVICE(0xeb1a, 0x2821),
1410 .driver_info = EM2820_BOARD_UNKNOWN },
1411 { USB_DEVICE(0xeb1a, 0x2860),
1412 .driver_info = EM2820_BOARD_UNKNOWN },
1413 { USB_DEVICE(0xeb1a, 0x2861),
1414 .driver_info = EM2820_BOARD_UNKNOWN },
1415 { USB_DEVICE(0xeb1a, 0x2870),
1416 .driver_info = EM2820_BOARD_UNKNOWN },
1417 { USB_DEVICE(0xeb1a, 0x2881),
1418 .driver_info = EM2820_BOARD_UNKNOWN },
1419 { USB_DEVICE(0xeb1a, 0x2883),
1420 .driver_info = EM2820_BOARD_UNKNOWN },
1421 { USB_DEVICE(0xeb1a, 0xe300),
1422 .driver_info = EM2861_BOARD_KWORLD_PVRTV_300U },
1423 { USB_DEVICE(0xeb1a, 0xe303),
1424 .driver_info = EM2860_BOARD_KAIOMY_TVNPC_U2 },
1425 { USB_DEVICE(0xeb1a, 0xe305),
1426 .driver_info = EM2880_BOARD_KWORLD_DVB_305U },
1427 { USB_DEVICE(0xeb1a, 0xe310),
1428 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD },
1429 { USB_DEVICE(0xeb1a, 0xa316),
1430 .driver_info = EM2883_BOARD_KWORLD_HYBRID_330U },
1431 { USB_DEVICE(0xeb1a, 0xe320),
1432 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II },
1433 { USB_DEVICE(0xeb1a, 0xe323),
1434 .driver_info = EM2882_BOARD_KWORLD_VS_DVBT },
1435 { USB_DEVICE(0xeb1a, 0xe350),
1436 .driver_info = EM2870_BOARD_KWORLD_350U },
1437 { USB_DEVICE(0xeb1a, 0xe355),
1438 .driver_info = EM2870_BOARD_KWORLD_355U },
1439 { USB_DEVICE(0xeb1a, 0x2801),
1440 .driver_info = EM2800_BOARD_GRABBEEX_USB2800 },
1441 { USB_DEVICE(0xeb1a, 0xe357),
1442 .driver_info = EM2870_BOARD_KWORLD_355U },
1443 { USB_DEVICE(0x1b80, 0xe302),
1444 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kaiser Baas Video to DVD maker */
1445 { USB_DEVICE(0x0ccd, 0x0036),
1446 .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 },
1447 { USB_DEVICE(0x0ccd, 0x004c),
1448 .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS_FR },
1449 { USB_DEVICE(0x0ccd, 0x004f),
1450 .driver_info = EM2860_BOARD_TERRATEC_HYBRID_XS },
1451 { USB_DEVICE(0x0ccd, 0x005e),
1452 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
1453 { USB_DEVICE(0x0ccd, 0x0042),
1454 .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS },
1455 { USB_DEVICE(0x0ccd, 0x0043),
1456 .driver_info = EM2870_BOARD_TERRATEC_XS },
1457 { USB_DEVICE(0x0ccd, 0x0047),
1458 .driver_info = EM2880_BOARD_TERRATEC_PRODIGY_XS },
1459 { USB_DEVICE(0x0ccd, 0x0084),
1460 .driver_info = EM2860_BOARD_TERRATEC_AV350 },
1461 { USB_DEVICE(0x0ccd, 0x0096),
1462 .driver_info = EM2860_BOARD_TERRATEC_GRABBY },
1463 { USB_DEVICE(0x185b, 0x2870),
1464 .driver_info = EM2870_BOARD_COMPRO_VIDEOMATE },
1465 { USB_DEVICE(0x185b, 0x2041),
1466 .driver_info = EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU },
1467 { USB_DEVICE(0x2040, 0x4200),
1468 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
1469 { USB_DEVICE(0x2040, 0x4201),
1470 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
1471 { USB_DEVICE(0x2040, 0x6500),
1472 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 },
1473 { USB_DEVICE(0x2040, 0x6502),
1474 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 },
1475 { USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */
1476 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
1477 { USB_DEVICE(0x2040, 0x6517), /* HP HVR-950 */
1478 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
1479 { USB_DEVICE(0x2040, 0x651b), /* RP HVR-950 */
1480 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
1481 { USB_DEVICE(0x2040, 0x651f),
1482 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 },
1483 { USB_DEVICE(0x0438, 0xb002),
1484 .driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 },
1485 { USB_DEVICE(0x2001, 0xf112),
1486 .driver_info = EM2820_BOARD_DLINK_USB_TV },
1487 { USB_DEVICE(0x2304, 0x0207),
1488 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
1489 { USB_DEVICE(0x2304, 0x0208),
1490 .driver_info = EM2820_BOARD_PINNACLE_USB_2 },
1491 { USB_DEVICE(0x2304, 0x021a),
1492 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
1493 { USB_DEVICE(0x2304, 0x0226),
1494 .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO },
1495 { USB_DEVICE(0x2304, 0x0227),
1496 .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO },
1497 { USB_DEVICE(0x0413, 0x6023),
1498 .driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII },
1499 { USB_DEVICE(0x093b, 0xa005),
1500 .driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U },
1501 { USB_DEVICE(0x04bb, 0x0515),
1502 .driver_info = EM2820_BOARD_IODATA_GVMVP_SZ },
1503 { },
1504};
1505MODULE_DEVICE_TABLE(usb, em28xx_id_table);
1506
1507/*
1508 * EEPROM hash table for devices with generic USB IDs
1509 */
1510static struct em28xx_hash_table em28xx_eeprom_hash[] = {
1511 /* P/N: SA 60002070465 Tuner: TVF7533-MF */
1512 {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF},
1513 {0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF},
1514 {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028},
1515 {0x9567eb1a, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028},
1516};
1517
1518/* I2C devicelist hash table for devices with generic USB IDs */
1519static struct em28xx_hash_table em28xx_i2c_hash[] = {
1520 {0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC},
1521 {0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC},
1522 {0x1ba50080, EM2860_BOARD_POINTNIX_INTRAORAL_CAMERA, TUNER_ABSENT},
1523 {0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC},
1524};
1525
1526/* I2C possible address to saa7115, tvp5150, msp3400, tvaudio */
1527static unsigned short saa711x_addrs[] = {
1528 0x4a >> 1, 0x48 >> 1, /* SAA7111, SAA7111A and SAA7113 */
1529 0x42 >> 1, 0x40 >> 1, /* SAA7114, SAA7115 and SAA7118 */
1530 I2C_CLIENT_END };
1531
1532static unsigned short tvp5150_addrs[] = {
1533 0xb8 >> 1,
1534 0xba >> 1,
1535 I2C_CLIENT_END
1536};
1537
1538static unsigned short msp3400_addrs[] = {
1539 0x80 >> 1,
1540 0x88 >> 1,
1541 I2C_CLIENT_END
1542};
1543
1544int em28xx_tuner_callback(void *ptr, int component, int command, int arg)
1545{
1546 int rc = 0;
1547 struct em28xx *dev = ptr;
1548
1549 if (dev->tuner_type != TUNER_XC2028)
1550 return 0;
1551
1552 if (command != XC2028_TUNER_RESET)
1553 return 0;
1554
1555 rc = em28xx_gpio_set(dev, dev->board.tuner_gpio);
1556
1557 return rc;
1558}
1559EXPORT_SYMBOL_GPL(em28xx_tuner_callback);
1560
1561static inline void em28xx_set_model(struct em28xx *dev)
1562{
1563 memcpy(&dev->board, &em28xx_boards[dev->model], sizeof(dev->board));
1564
1565 /* Those are the default values for the majority of boards
1566 Use those values if not specified otherwise at boards entry
1567 */
1568 if (!dev->board.xclk)
1569 dev->board.xclk = EM28XX_XCLK_IR_RC5_MODE |
1570 EM28XX_XCLK_FREQUENCY_12MHZ;
1571
1572 if (!dev->board.i2c_speed)
1573 dev->board.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1574 EM28XX_I2C_FREQ_100_KHZ;
1575}
1576
1577/* Since em28xx_pre_card_setup() requires a proper dev->model,
1578 * this won't work for boards with generic PCI IDs
1579 */
1580void em28xx_pre_card_setup(struct em28xx *dev)
1581{
1582 int rc;
1583
1584 em28xx_set_model(dev);
1585
1586 em28xx_info("Identified as %s (card=%d)\n",
1587 dev->board.name, dev->model);
1588
1589 /* Set the default GPO/GPIO for legacy devices */
1590 dev->reg_gpo_num = EM2880_R04_GPO;
1591 dev->reg_gpio_num = EM28XX_R08_GPIO;
1592
1593 dev->wait_after_write = 5;
1594
1595 /* Based on the Chip ID, set the device configuration */
1596 rc = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
1597 if (rc > 0) {
1598 dev->chip_id = rc;
1599
1600 switch (dev->chip_id) {
1601 case CHIP_ID_EM2750:
1602 em28xx_info("chip ID is em2750\n");
1603 break;
1604 case CHIP_ID_EM2820:
1605 em28xx_info("chip ID is em2820\n");
1606 break;
1607 case CHIP_ID_EM2840:
1608 em28xx_info("chip ID is em2840\n");
1609 break;
1610 case CHIP_ID_EM2860:
1611 em28xx_info("chip ID is em2860\n");
1612 break;
1613 case CHIP_ID_EM2870:
1614 em28xx_info("chip ID is em2870\n");
1615 dev->wait_after_write = 0;
1616 break;
1617 case CHIP_ID_EM2874:
1618 em28xx_info("chip ID is em2874\n");
1619 dev->reg_gpio_num = EM2874_R80_GPIO;
1620 dev->wait_after_write = 0;
1621 break;
1622 case CHIP_ID_EM2883:
1623 em28xx_info("chip ID is em2882/em2883\n");
1624 dev->wait_after_write = 0;
1625 break;
1626 default:
1627 em28xx_info("em28xx chip ID = %d\n", dev->chip_id);
1628 }
1629 }
1630
1631 /* Prepopulate cached GPO register content */
1632 rc = em28xx_read_reg(dev, dev->reg_gpo_num);
1633 if (rc >= 0)
1634 dev->reg_gpo = rc;
1635
1636 /* Set the initial XCLK and I2C clock values based on the board
1637 definition */
1638 em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk & 0x7f);
1639 em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed);
1640 msleep(50);
1641
1642 /* request some modules */
1643 switch (dev->model) {
1644 case EM2861_BOARD_PLEXTOR_PX_TV100U:
1645 /* FIXME guess */
1646 /* Turn on analog audio output */
1647 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
1648 break;
1649 case EM2861_BOARD_KWORLD_PVRTV_300U:
1650 case EM2880_BOARD_KWORLD_DVB_305U:
1651 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x6d);
1652 msleep(10);
1653 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x7d);
1654 msleep(10);
1655 break;
1656 case EM2870_BOARD_COMPRO_VIDEOMATE:
1657 /* TODO: someone can do some cleanup here...
1658 not everything's needed */
1659 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
1660 msleep(10);
1661 em28xx_write_reg(dev, EM2880_R04_GPO, 0x01);
1662 msleep(10);
1663 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
1664 mdelay(70);
1665 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc);
1666 mdelay(70);
1667 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xdc);
1668 mdelay(70);
1669 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc);
1670 mdelay(70);
1671 break;
1672 case EM2870_BOARD_TERRATEC_XS_MT2060:
1673 /* this device needs some gpio writes to get the DVB-T
1674 demod work */
1675 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
1676 mdelay(70);
1677 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde);
1678 mdelay(70);
1679 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
1680 mdelay(70);
1681 break;
1682 case EM2870_BOARD_PINNACLE_PCTV_DVB:
1683 /* this device needs some gpio writes to get the
1684 DVB-T demod work */
1685 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
1686 mdelay(70);
1687 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde);
1688 mdelay(70);
1689 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
1690 mdelay(70);
1691 break;
1692 case EM2820_BOARD_GADMEI_UTV310:
1693 case EM2820_BOARD_MSI_VOX_USB_2:
1694 /* enables audio for that devices */
1695 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
1696 break;
1697
1698 case EM2860_BOARD_KAIOMY_TVNPC_U2:
1699 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1);
1700 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
1701 em28xx_write_regs(dev, 0x0d, "\x42", 1);
1702 em28xx_write_regs(dev, 0x08, "\xfd", 1);
1703 msleep(10);
1704 em28xx_write_regs(dev, 0x08, "\xff", 1);
1705 msleep(10);
1706 em28xx_write_regs(dev, 0x08, "\x7f", 1);
1707 msleep(10);
1708 em28xx_write_regs(dev, 0x08, "\x6b", 1);
1709
1710 break;
1711 case EM2860_BOARD_EASYCAP:
1712 em28xx_write_regs(dev, 0x08, "\xf8", 1);
1713 break;
1714
1715 case EM2820_BOARD_IODATA_GVMVP_SZ:
1716 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
1717 msleep(70);
1718 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7);
1719 msleep(10);
1720 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
1721 msleep(70);
1722 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
1723 msleep(70);
1724 break;
1725 }
1726
1727 em28xx_gpio_set(dev, dev->board.tuner_gpio);
1728 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
1729
1730 /* Unlock device */
1731 em28xx_set_mode(dev, EM28XX_SUSPEND);
1732}
1733
1734static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
1735{
1736 memset(ctl, 0, sizeof(*ctl));
1737
1738 ctl->fname = XC2028_DEFAULT_FIRMWARE;
1739 ctl->max_len = 64;
1740 ctl->mts = em28xx_boards[dev->model].mts_firmware;
1741
1742 switch (dev->model) {
1743 case EM2880_BOARD_EMPIRE_DUAL_TV:
1744 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
1745 ctl->demod = XC3028_FE_ZARLINK456;
1746 break;
1747 case EM2880_BOARD_TERRATEC_HYBRID_XS:
1748 ctl->demod = XC3028_FE_ZARLINK456;
1749 break;
1750 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
1751 /* djh - Not sure which demod we need here */
1752 ctl->demod = XC3028_FE_DEFAULT;
1753 break;
1754 case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
1755 ctl->demod = XC3028_FE_DEFAULT;
1756 ctl->fname = XC3028L_DEFAULT_FIRMWARE;
1757 break;
1758 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
1759 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
1760 case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
1761 /* FIXME: Better to specify the needed IF */
1762 ctl->demod = XC3028_FE_DEFAULT;
1763 break;
1764 case EM2883_BOARD_KWORLD_HYBRID_330U:
1765 ctl->demod = XC3028_FE_CHINA;
1766 ctl->fname = XC2028_DEFAULT_FIRMWARE;
1767 break;
1768 default:
1769 ctl->demod = XC3028_FE_OREN538;
1770 }
1771}
1772
1773static void em28xx_tuner_setup(struct em28xx *dev)
1774{
1775 struct tuner_setup tun_setup;
1776 struct v4l2_frequency f;
1777
1778 if (dev->tuner_type == TUNER_ABSENT)
1779 return;
1780
1781 memset(&tun_setup, 0, sizeof(tun_setup));
1782
1783 tun_setup.mode_mask = T_ANALOG_TV | T_RADIO;
1784 tun_setup.tuner_callback = em28xx_tuner_callback;
1785
1786 if (dev->board.radio.type) {
1787 tun_setup.type = dev->board.radio.type;
1788 tun_setup.addr = dev->board.radio_addr;
1789
1790 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
1791 }
1792
1793 if ((dev->tuner_type != TUNER_ABSENT) && (dev->tuner_type)) {
1794 tun_setup.type = dev->tuner_type;
1795 tun_setup.addr = dev->tuner_addr;
1796
1797 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
1798 }
1799
1800 if (dev->tda9887_conf) {
1801 struct v4l2_priv_tun_config tda9887_cfg;
1802
1803 tda9887_cfg.tuner = TUNER_TDA9887;
1804 tda9887_cfg.priv = &dev->tda9887_conf;
1805
1806 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &tda9887_cfg);
1807 }
1808
1809 if (dev->tuner_type == TUNER_XC2028) {
1810 struct v4l2_priv_tun_config xc2028_cfg;
1811 struct xc2028_ctrl ctl;
1812
1813 memset(&xc2028_cfg, 0, sizeof(xc2028_cfg));
1814 memset(&ctl, 0, sizeof(ctl));
1815
1816 em28xx_setup_xc3028(dev, &ctl);
1817
1818 xc2028_cfg.tuner = TUNER_XC2028;
1819 xc2028_cfg.priv = &ctl;
1820
1821 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &xc2028_cfg);
1822 }
1823
1824 /* configure tuner */
1825 f.tuner = 0;
1826 f.type = V4L2_TUNER_ANALOG_TV;
1827 f.frequency = 9076; /* just a magic number */
1828 dev->ctl_freq = f.frequency;
1829 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f);
1830}
1831
1832static int em28xx_hint_board(struct em28xx *dev)
1833{
1834 int i;
1835
1836 /* HINT method: EEPROM
1837 *
1838 * This method works only for boards with eeprom.
1839 * Uses a hash of all eeprom bytes. The hash should be
1840 * unique for a vendor/tuner pair.
1841 * There are a high chance that tuners for different
1842 * video standards produce different hashes.
1843 */
1844 for (i = 0; i < ARRAY_SIZE(em28xx_eeprom_hash); i++) {
1845 if (dev->hash == em28xx_eeprom_hash[i].hash) {
1846 dev->model = em28xx_eeprom_hash[i].model;
1847 dev->tuner_type = em28xx_eeprom_hash[i].tuner;
1848
1849 em28xx_errdev("Your board has no unique USB ID.\n");
1850 em28xx_errdev("A hint were successfully done, "
1851 "based on eeprom hash.\n");
1852 em28xx_errdev("This method is not 100%% failproof.\n");
1853 em28xx_errdev("If the board were missdetected, "
1854 "please email this log to:\n");
1855 em28xx_errdev("\tV4L Mailing List "
1856 " <linux-media@vger.kernel.org>\n");
1857 em28xx_errdev("Board detected as %s\n",
1858 em28xx_boards[dev->model].name);
1859
1860 return 0;
1861 }
1862 }
1863
1864 /* HINT method: I2C attached devices
1865 *
1866 * This method works for all boards.
1867 * Uses a hash of i2c scanned devices.
1868 * Devices with the same i2c attached chips will
1869 * be considered equal.
1870 * This method is less precise than the eeprom one.
1871 */
1872
1873 /* user did not request i2c scanning => do it now */
1874 if (!dev->i2c_hash)
1875 em28xx_do_i2c_scan(dev);
1876
1877 for (i = 0; i < ARRAY_SIZE(em28xx_i2c_hash); i++) {
1878 if (dev->i2c_hash == em28xx_i2c_hash[i].hash) {
1879 dev->model = em28xx_i2c_hash[i].model;
1880 dev->tuner_type = em28xx_i2c_hash[i].tuner;
1881 em28xx_errdev("Your board has no unique USB ID.\n");
1882 em28xx_errdev("A hint were successfully done, "
1883 "based on i2c devicelist hash.\n");
1884 em28xx_errdev("This method is not 100%% failproof.\n");
1885 em28xx_errdev("If the board were missdetected, "
1886 "please email this log to:\n");
1887 em28xx_errdev("\tV4L Mailing List "
1888 " <linux-media@vger.kernel.org>\n");
1889 em28xx_errdev("Board detected as %s\n",
1890 em28xx_boards[dev->model].name);
1891
1892 return 0;
1893 }
1894 }
1895
1896 em28xx_errdev("Your board has no unique USB ID and thus need a "
1897 "hint to be detected.\n");
1898 em28xx_errdev("You may try to use card=<n> insmod option to "
1899 "workaround that.\n");
1900 em28xx_errdev("Please send an email with this log to:\n");
1901 em28xx_errdev("\tV4L Mailing List <linux-media@vger.kernel.org>\n");
1902 em28xx_errdev("Board eeprom hash is 0x%08lx\n", dev->hash);
1903 em28xx_errdev("Board i2c devicelist hash is 0x%08lx\n", dev->i2c_hash);
1904
1905 em28xx_errdev("Here is a list of valid choices for the card=<n>"
1906 " insmod option:\n");
1907 for (i = 0; i < em28xx_bcount; i++) {
1908 em28xx_errdev(" card=%d -> %s\n",
1909 i, em28xx_boards[i].name);
1910 }
1911 return -1;
1912}
1913
1914/* ----------------------------------------------------------------------- */
1915void em28xx_register_i2c_ir(struct em28xx *dev)
1916{
1917 struct i2c_board_info info;
1918 struct IR_i2c_init_data init_data;
1919 const unsigned short addr_list[] = {
1920 0x30, 0x47, I2C_CLIENT_END
1921 };
1922
1923 if (disable_ir)
1924 return;
1925
1926 memset(&info, 0, sizeof(struct i2c_board_info));
1927 memset(&init_data, 0, sizeof(struct IR_i2c_init_data));
1928 strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
1929
1930 /* detect & configure */
1931 switch (dev->model) {
1932 case (EM2800_BOARD_UNKNOWN):
1933 break;
1934 case (EM2820_BOARD_UNKNOWN):
1935 break;
1936 case (EM2800_BOARD_TERRATEC_CINERGY_200):
1937 case (EM2820_BOARD_TERRATEC_CINERGY_250):
1938 init_data.ir_codes = ir_codes_em_terratec;
1939 init_data.get_key = em28xx_get_key_terratec;
1940 init_data.name = "i2c IR (EM28XX Terratec)";
1941 break;
1942 case (EM2820_BOARD_PINNACLE_USB_2):
1943 init_data.ir_codes = ir_codes_pinnacle_grey;
1944 init_data.get_key = em28xx_get_key_pinnacle_usb_grey;
1945 init_data.name = "i2c IR (EM28XX Pinnacle PCTV)";
1946 break;
1947 case (EM2820_BOARD_HAUPPAUGE_WINTV_USB_2):
1948 init_data.ir_codes = ir_codes_hauppauge_new;
1949 init_data.get_key = em28xx_get_key_em_haup;
1950 init_data.name = "i2c IR (EM2840 Hauppauge)";
1951 break;
1952 case (EM2820_BOARD_MSI_VOX_USB_2):
1953 break;
1954 case (EM2800_BOARD_LEADTEK_WINFAST_USBII):
1955 break;
1956 case (EM2800_BOARD_KWORLD_USB2800):
1957 break;
1958 case (EM2800_BOARD_GRABBEEX_USB2800):
1959 break;
1960 }
1961
1962 if (init_data.name)
1963 info.platform_data = &init_data;
1964 i2c_new_probed_device(&dev->i2c_adap, &info, addr_list);
1965}
1966
1967void em28xx_card_setup(struct em28xx *dev)
1968{
1969 em28xx_set_model(dev);
1970
1971 dev->tuner_type = em28xx_boards[dev->model].tuner_type;
1972 if (em28xx_boards[dev->model].tuner_addr)
1973 dev->tuner_addr = em28xx_boards[dev->model].tuner_addr;
1974
1975 /* request some modules */
1976 switch (dev->model) {
1977 case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
1978 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
1979 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
1980 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
1981 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
1982 {
1983 struct tveeprom tv;
1984#ifdef CONFIG_MODULES
1985 request_module("tveeprom");
1986#endif
1987 /* Call first TVeeprom */
1988
1989 dev->i2c_client.addr = 0xa0 >> 1;
1990 tveeprom_hauppauge_analog(&dev->i2c_client, &tv, dev->eedata);
1991
1992 dev->tuner_type = tv.tuner_type;
1993
1994 if (tv.audio_processor == V4L2_IDENT_MSPX4XX) {
1995 dev->i2s_speed = 2048000;
1996 dev->board.has_msp34xx = 1;
1997 }
1998#ifdef CONFIG_MODULES
1999 if (tv.has_ir)
2000 request_module("ir-kbd-i2c");
2001#endif
2002 break;
2003 }
2004 case EM2820_BOARD_KWORLD_PVRTV2800RF:
2005 /* GPIO enables sound on KWORLD PVR TV 2800RF */
2006 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf9);
2007 break;
2008 case EM2820_BOARD_UNKNOWN:
2009 case EM2800_BOARD_UNKNOWN:
2010 /*
2011 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
2012 *
2013 * This occurs because they share identical USB vendor and
2014 * product IDs.
2015 *
2016 * What we do here is look up the EEPROM hash of the K-WORLD
2017 * and if it is found then we decide that we do not have
2018 * a DIGIVOX and reset the device to the K-WORLD instead.
2019 *
2020 * This solution is only valid if they do not share eeprom
2021 * hash identities which has not been determined as yet.
2022 */
2023 case EM2880_BOARD_MSI_DIGIVOX_AD:
2024 if (!em28xx_hint_board(dev))
2025 em28xx_set_model(dev);
2026 break;
2027 }
2028
2029 if (dev->board.has_snapshot_button)
2030 em28xx_register_snapshot_button(dev);
2031
2032 if (dev->board.valid == EM28XX_BOARD_NOT_VALIDATED) {
2033 em28xx_errdev("\n\n");
2034 em28xx_errdev("The support for this board weren't "
2035 "valid yet.\n");
2036 em28xx_errdev("Please send a report of having this working\n");
2037 em28xx_errdev("not to V4L mailing list (and/or to other "
2038 "addresses)\n\n");
2039 }
2040
2041 /* Allow override tuner type by a module parameter */
2042 if (tuner >= 0)
2043 dev->tuner_type = tuner;
2044
2045 /* request some modules */
2046 if (dev->board.has_msp34xx)
2047 v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2048 "msp3400", "msp3400", msp3400_addrs);
2049
2050 if (dev->board.decoder == EM28XX_SAA711X)
2051 v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2052 "saa7115", "saa7115_auto", saa711x_addrs);
2053
2054 if (dev->board.decoder == EM28XX_TVP5150)
2055 v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2056 "tvp5150", "tvp5150", tvp5150_addrs);
2057
2058 if (dev->board.adecoder == EM28XX_TVAUDIO)
2059 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2060 "tvaudio", "tvaudio", dev->board.tvaudio_addr);
2061
2062 if (dev->board.tuner_type != TUNER_ABSENT) {
2063 int has_demod = (dev->tda9887_conf & TDA9887_PRESENT);
2064
2065 if (dev->board.radio.type)
2066 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2067 "tuner", "tuner", dev->board.radio_addr);
2068
2069 if (has_demod)
2070 v4l2_i2c_new_probed_subdev(&dev->v4l2_dev,
2071 &dev->i2c_adap, "tuner", "tuner",
2072 v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
2073 if (dev->tuner_addr == 0) {
2074 enum v4l2_i2c_tuner_type type =
2075 has_demod ? ADDRS_TV_WITH_DEMOD : ADDRS_TV;
2076 struct v4l2_subdev *sd;
2077
2078 sd = v4l2_i2c_new_probed_subdev(&dev->v4l2_dev,
2079 &dev->i2c_adap, "tuner", "tuner",
2080 v4l2_i2c_tuner_addrs(type));
2081
2082 if (sd)
2083 dev->tuner_addr = v4l2_i2c_subdev_addr(sd);
2084 } else {
2085 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2086 "tuner", "tuner", dev->tuner_addr);
2087 }
2088 }
2089
2090 em28xx_tuner_setup(dev);
2091 em28xx_ir_init(dev);
2092}
2093
2094
2095#if defined(CONFIG_MODULES) && defined(MODULE)
2096static void request_module_async(struct work_struct *work)
2097{
2098 struct em28xx *dev = container_of(work,
2099 struct em28xx, request_module_wk);
2100
2101 if (dev->has_audio_class)
2102 request_module("snd-usb-audio");
2103 else if (dev->has_alsa_audio)
2104 request_module("em28xx-alsa");
2105
2106 if (dev->board.has_dvb)
2107 request_module("em28xx-dvb");
2108}
2109
2110static void request_modules(struct em28xx *dev)
2111{
2112 INIT_WORK(&dev->request_module_wk, request_module_async);
2113 schedule_work(&dev->request_module_wk);
2114}
2115#else
2116#define request_modules(dev)
2117#endif /* CONFIG_MODULES */
2118
2119/*
2120 * em28xx_realease_resources()
2121 * unregisters the v4l2,i2c and usb devices
2122 * called when the device gets disconected or at module unload
2123*/
2124void em28xx_release_resources(struct em28xx *dev)
2125{
2126 if (dev->sbutton_input_dev)
2127 em28xx_deregister_snapshot_button(dev);
2128
2129 if (dev->ir)
2130 em28xx_ir_fini(dev);
2131
2132 /*FIXME: I2C IR should be disconnected */
2133
2134 em28xx_release_analog_resources(dev);
2135
2136 em28xx_remove_from_devlist(dev);
2137
2138 em28xx_i2c_unregister(dev);
2139
2140 v4l2_device_unregister(&dev->v4l2_dev);
2141
2142 usb_put_dev(dev->udev);
2143
2144 /* Mark device as unused */
2145 em28xx_devused &= ~(1 << dev->devno);
2146};
2147
2148/*
2149 * em28xx_init_dev()
2150 * allocates and inits the device structs, registers i2c bus and v4l device
2151 */
2152static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
2153 struct usb_interface *interface,
2154 int minor)
2155{
2156 struct em28xx *dev = *devhandle;
2157 int retval = -ENOMEM;
2158 int errCode;
2159
2160 dev->udev = udev;
2161 mutex_init(&dev->ctrl_urb_lock);
2162 spin_lock_init(&dev->slock);
2163 init_waitqueue_head(&dev->open);
2164 init_waitqueue_head(&dev->wait_frame);
2165 init_waitqueue_head(&dev->wait_stream);
2166
2167 dev->em28xx_write_regs = em28xx_write_regs;
2168 dev->em28xx_read_reg = em28xx_read_reg;
2169 dev->em28xx_read_reg_req_len = em28xx_read_reg_req_len;
2170 dev->em28xx_write_regs_req = em28xx_write_regs_req;
2171 dev->em28xx_read_reg_req = em28xx_read_reg_req;
2172 dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800;
2173
2174 em28xx_pre_card_setup(dev);
2175
2176 if (!dev->board.is_em2800) {
2177 /* Sets I2C speed to 100 KHz */
2178 retval = em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x40);
2179 if (retval < 0) {
2180 em28xx_errdev("%s: em28xx_write_regs_req failed!"
2181 " retval [%d]\n",
2182 __func__, retval);
2183 return retval;
2184 }
2185 }
2186
2187 retval = v4l2_device_register(&interface->dev, &dev->v4l2_dev);
2188 if (retval < 0) {
2189 em28xx_errdev("Call to v4l2_device_register() failed!\n");
2190 return retval;
2191 }
2192
2193 /* register i2c bus */
2194 errCode = em28xx_i2c_register(dev);
2195 if (errCode < 0) {
2196 v4l2_device_unregister(&dev->v4l2_dev);
2197 em28xx_errdev("%s: em28xx_i2c_register - errCode [%d]!\n",
2198 __func__, errCode);
2199 return errCode;
2200 }
2201
2202 /* Do board specific init and eeprom reading */
2203 em28xx_card_setup(dev);
2204
2205 /* Configure audio */
2206 errCode = em28xx_audio_setup(dev);
2207 if (errCode < 0) {
2208 v4l2_device_unregister(&dev->v4l2_dev);
2209 em28xx_errdev("%s: Error while setting audio - errCode [%d]!\n",
2210 __func__, errCode);
2211 }
2212
2213 /* wake i2c devices */
2214 em28xx_wake_i2c(dev);
2215
2216 /* init video dma queues */
2217 INIT_LIST_HEAD(&dev->vidq.active);
2218 INIT_LIST_HEAD(&dev->vidq.queued);
2219
2220
2221 if (dev->board.has_msp34xx) {
2222 /* Send a reset to other chips via gpio */
2223 errCode = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7);
2224 if (errCode < 0) {
2225 em28xx_errdev("%s: em28xx_write_regs_req - "
2226 "msp34xx(1) failed! errCode [%d]\n",
2227 __func__, errCode);
2228 return errCode;
2229 }
2230 msleep(3);
2231
2232 errCode = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
2233 if (errCode < 0) {
2234 em28xx_errdev("%s: em28xx_write_regs_req - "
2235 "msp34xx(2) failed! errCode [%d]\n",
2236 __func__, errCode);
2237 return errCode;
2238 }
2239 msleep(3);
2240 }
2241
2242 em28xx_add_into_devlist(dev);
2243
2244 retval = em28xx_register_analog_devices(dev);
2245 if (retval < 0) {
2246 em28xx_release_resources(dev);
2247 goto fail_reg_devices;
2248 }
2249
2250 em28xx_init_extension(dev);
2251
2252 /* Save some power by putting tuner to sleep */
2253 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_standby);
2254
2255 return 0;
2256
2257fail_reg_devices:
2258 return retval;
2259}
2260
2261/*
2262 * em28xx_usb_probe()
2263 * checks for supported devices
2264 */
2265static int em28xx_usb_probe(struct usb_interface *interface,
2266 const struct usb_device_id *id)
2267{
2268 const struct usb_endpoint_descriptor *endpoint;
2269 struct usb_device *udev;
2270 struct usb_interface *uif;
2271 struct em28xx *dev = NULL;
2272 int retval;
2273 int i, nr, ifnum, isoc_pipe;
2274 char *speed;
2275 char descr[255] = "";
2276
2277 udev = usb_get_dev(interface_to_usbdev(interface));
2278 ifnum = interface->altsetting[0].desc.bInterfaceNumber;
2279
2280 /* Check to see next free device and mark as used */
2281 nr = find_first_zero_bit(&em28xx_devused, EM28XX_MAXBOARDS);
2282 em28xx_devused |= 1<<nr;
2283
2284 /* Don't register audio interfaces */
2285 if (interface->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
2286 em28xx_err(DRIVER_NAME " audio device (%04x:%04x): "
2287 "interface %i, class %i\n",
2288 le16_to_cpu(udev->descriptor.idVendor),
2289 le16_to_cpu(udev->descriptor.idProduct),
2290 ifnum,
2291 interface->altsetting[0].desc.bInterfaceClass);
2292
2293 em28xx_devused &= ~(1<<nr);
2294 retval = -ENODEV;
2295 goto err;
2296 }
2297
2298 endpoint = &interface->cur_altsetting->endpoint[0].desc;
2299
2300 /* check if the device has the iso in endpoint at the correct place */
2301 if (usb_endpoint_xfer_isoc(endpoint)
2302 &&
2303 (interface->altsetting[1].endpoint[0].desc.wMaxPacketSize == 940)) {
2304 /* It's a newer em2874/em2875 device */
2305 isoc_pipe = 0;
2306 } else {
2307 int check_interface = 1;
2308 isoc_pipe = 1;
2309 endpoint = &interface->cur_altsetting->endpoint[1].desc;
2310 if (!usb_endpoint_xfer_isoc(endpoint))
2311 check_interface = 0;
2312
2313 if (usb_endpoint_dir_out(endpoint))
2314 check_interface = 0;
2315
2316 if (!check_interface) {
2317 em28xx_err(DRIVER_NAME " video device (%04x:%04x): "
2318 "interface %i, class %i found.\n",
2319 le16_to_cpu(udev->descriptor.idVendor),
2320 le16_to_cpu(udev->descriptor.idProduct),
2321 ifnum,
2322 interface->altsetting[0].desc.bInterfaceClass);
2323
2324 em28xx_err(DRIVER_NAME " This is an anciliary "
2325 "interface not used by the driver\n");
2326
2327 em28xx_devused &= ~(1<<nr);
2328 retval = -ENODEV;
2329 goto err;
2330 }
2331 }
2332
2333 switch (udev->speed) {
2334 case USB_SPEED_LOW:
2335 speed = "1.5";
2336 break;
2337 case USB_SPEED_UNKNOWN:
2338 case USB_SPEED_FULL:
2339 speed = "12";
2340 break;
2341 case USB_SPEED_HIGH:
2342 speed = "480";
2343 break;
2344 default:
2345 speed = "unknown";
2346 }
2347
2348 if (udev->manufacturer)
2349 strlcpy(descr, udev->manufacturer, sizeof(descr));
2350
2351 if (udev->product) {
2352 if (*descr)
2353 strlcat(descr, " ", sizeof(descr));
2354 strlcat(descr, udev->product, sizeof(descr));
2355 }
2356 if (*descr)
2357 strlcat(descr, " ", sizeof(descr));
2358
2359 printk(DRIVER_NAME ": New device %s@ %s Mbps "
2360 "(%04x:%04x, interface %d, class %d)\n",
2361 descr,
2362 speed,
2363 le16_to_cpu(udev->descriptor.idVendor),
2364 le16_to_cpu(udev->descriptor.idProduct),
2365 ifnum,
2366 interface->altsetting->desc.bInterfaceNumber);
2367
2368 if (nr >= EM28XX_MAXBOARDS) {
2369 printk(DRIVER_NAME ": Supports only %i em28xx boards.\n",
2370 EM28XX_MAXBOARDS);
2371 em28xx_devused &= ~(1<<nr);
2372 retval = -ENOMEM;
2373 goto err;
2374 }
2375
2376 /* allocate memory for our device state and initialize it */
2377 dev = kzalloc(sizeof(*dev), GFP_KERNEL);
2378 if (dev == NULL) {
2379 em28xx_err(DRIVER_NAME ": out of memory!\n");
2380 em28xx_devused &= ~(1<<nr);
2381 retval = -ENOMEM;
2382 goto err;
2383 }
2384
2385 snprintf(dev->name, 29, "em28xx #%d", nr);
2386 dev->devno = nr;
2387 dev->model = id->driver_info;
2388 dev->alt = -1;
2389
2390 /* Checks if audio is provided by some interface */
2391 for (i = 0; i < udev->config->desc.bNumInterfaces; i++) {
2392 uif = udev->config->interface[i];
2393 if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
2394 dev->has_audio_class = 1;
2395 break;
2396 }
2397 }
2398
2399 /* compute alternate max packet sizes */
2400 uif = udev->actconfig->interface[0];
2401
2402 dev->num_alt = uif->num_altsetting;
2403 dev->alt_max_pkt_size = kmalloc(32 * dev->num_alt, GFP_KERNEL);
2404
2405 if (dev->alt_max_pkt_size == NULL) {
2406 em28xx_errdev("out of memory!\n");
2407 em28xx_devused &= ~(1<<nr);
2408 kfree(dev);
2409 retval = -ENOMEM;
2410 goto err;
2411 }
2412
2413 for (i = 0; i < dev->num_alt ; i++) {
2414 u16 tmp = le16_to_cpu(uif->altsetting[i].endpoint[isoc_pipe].desc.wMaxPacketSize);
2415 dev->alt_max_pkt_size[i] =
2416 (tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
2417 }
2418
2419 if ((card[nr] >= 0) && (card[nr] < em28xx_bcount))
2420 dev->model = card[nr];
2421
2422 /* allocate device struct */
2423 mutex_init(&dev->lock);
2424 mutex_lock(&dev->lock);
2425 retval = em28xx_init_dev(&dev, udev, interface, nr);
2426 if (retval) {
2427 em28xx_devused &= ~(1<<dev->devno);
2428 kfree(dev);
2429 goto err;
2430 }
2431
2432 /* save our data pointer in this interface device */
2433 usb_set_intfdata(interface, dev);
2434
2435 request_modules(dev);
2436
2437 /* Should be the last thing to do, to avoid newer udev's to
2438 open the device before fully initializing it
2439 */
2440 mutex_unlock(&dev->lock);
2441
2442 return 0;
2443
2444err:
2445 return retval;
2446}
2447
2448/*
2449 * em28xx_usb_disconnect()
2450 * called when the device gets diconencted
2451 * video device will be unregistered on v4l2_close in case it is still open
2452 */
2453static void em28xx_usb_disconnect(struct usb_interface *interface)
2454{
2455 struct em28xx *dev;
2456
2457 dev = usb_get_intfdata(interface);
2458 usb_set_intfdata(interface, NULL);
2459
2460 if (!dev)
2461 return;
2462
2463 em28xx_info("disconnecting %s\n", dev->vdev->name);
2464
2465 /* wait until all current v4l2 io is finished then deallocate
2466 resources */
2467 mutex_lock(&dev->lock);
2468
2469 wake_up_interruptible_all(&dev->open);
2470
2471 v4l2_device_disconnect(&dev->v4l2_dev);
2472
2473 if (dev->users) {
2474 em28xx_warn
2475 ("device /dev/video%d is open! Deregistration and memory "
2476 "deallocation are deferred on close.\n",
2477 dev->vdev->num);
2478
2479 dev->state |= DEV_MISCONFIGURED;
2480 em28xx_uninit_isoc(dev);
2481 dev->state |= DEV_DISCONNECTED;
2482 wake_up_interruptible(&dev->wait_frame);
2483 wake_up_interruptible(&dev->wait_stream);
2484 } else {
2485 dev->state |= DEV_DISCONNECTED;
2486 em28xx_release_resources(dev);
2487 }
2488
2489 em28xx_close_extension(dev);
2490
2491 mutex_unlock(&dev->lock);
2492
2493 if (!dev->users) {
2494 kfree(dev->alt_max_pkt_size);
2495 kfree(dev);
2496 }
2497}
2498
2499static struct usb_driver em28xx_usb_driver = {
2500 .name = "em28xx",
2501 .probe = em28xx_usb_probe,
2502 .disconnect = em28xx_usb_disconnect,
2503 .id_table = em28xx_id_table,
2504};
2505
2506static int __init em28xx_module_init(void)
2507{
2508 int result;
2509
2510 /* register this driver with the USB subsystem */
2511 result = usb_register(&em28xx_usb_driver);
2512 if (result)
2513 em28xx_err(DRIVER_NAME
2514 " usb_register failed. Error number %d.\n", result);
2515
2516 printk(KERN_INFO DRIVER_NAME " driver loaded\n");
2517
2518 return result;
2519}
2520
2521static void __exit em28xx_module_exit(void)
2522{
2523 /* deregister this driver with the USB subsystem */
2524 usb_deregister(&em28xx_usb_driver);
2525}
2526
2527module_init(em28xx_module_init);
2528module_exit(em28xx_module_exit);
Linux kernel - Deliverables
This page took 0.033466 seconds and 5 git commands to generate.