projects / deliverable / linux.git / blame_incremental
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (non-incremental) | history | HEAD
[media] em28xx: add remote for PCTV nanoStick T2 290e
[deliverable/linux.git] / drivers / media / video / em28xx / em28xx-cards.c
... / ...
CommitLineData
1/*
2 em28xx-cards.c - driver for Empia EM2800/EM2820/2840 USB
3 video capture devices
4
5 Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it>
6 Markus Rechberger <mrechberger@gmail.com>
7 Mauro Carvalho Chehab <mchehab@infradead.org>
8 Sascha Sommer <saschasommer@freenet.de>
9
10 This program is free software; you can redistribute it and/or modify
11 it under the terms of the GNU General Public License as published by
12 the Free Software Foundation; either version 2 of the License, or
13 (at your option) any later version.
14
15 This program is distributed in the hope that it will be useful,
16 but WITHOUT ANY WARRANTY; without even the implied warranty of
17 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 GNU General Public License for more details.
19
20 You should have received a copy of the GNU General Public License
21 along with this program; if not, write to the Free Software
22 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
23 */
24
25#include <linux/init.h>
26#include <linux/module.h>
27#include <linux/slab.h>
28#include <linux/delay.h>
29#include <linux/i2c.h>
30#include <linux/usb.h>
31#include <media/tuner.h>
32#include <media/msp3400.h>
33#include <media/saa7115.h>
34#include <media/tvp5150.h>
35#include <media/tvaudio.h>
36#include <media/mt9v011.h>
37#include <media/i2c-addr.h>
38#include <media/tveeprom.h>
39#include <media/v4l2-common.h>
40#include <media/v4l2-chip-ident.h>
41
42#include "em28xx.h"
43
44#define DRIVER_NAME "em28xx"
45
46static int tuner = -1;
47module_param(tuner, int, 0444);
48MODULE_PARM_DESC(tuner, "tuner type");
49
50static unsigned int disable_ir;
51module_param(disable_ir, int, 0444);
52MODULE_PARM_DESC(disable_ir, "disable infrared remote support");
53
54static unsigned int disable_usb_speed_check;
55module_param(disable_usb_speed_check, int, 0444);
56MODULE_PARM_DESC(disable_usb_speed_check,
57 "override min bandwidth requirement of 480M bps");
58
59static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET };
60module_param_array(card, int, NULL, 0444);
61MODULE_PARM_DESC(card, "card type");
62
63/* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS */
64static unsigned long em28xx_devused;
65
66struct em28xx_hash_table {
67 unsigned long hash;
68 unsigned int model;
69 unsigned int tuner;
70};
71
72/*
73 * Reset sequences for analog/digital modes
74 */
75
76/* Reset for the most [analog] boards */
77static struct em28xx_reg_seq default_analog[] = {
78 {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
79 { -1, -1, -1, -1},
80};
81
82/* Reset for the most [digital] boards */
83static struct em28xx_reg_seq default_digital[] = {
84 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
85 { -1, -1, -1, -1},
86};
87
88/* Board Hauppauge WinTV HVR 900 analog */
89static struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = {
90 {EM28XX_R08_GPIO, 0x2d, ~EM_GPIO_4, 10},
91 {0x05, 0xff, 0x10, 10},
92 { -1, -1, -1, -1},
93};
94
95/* Board Hauppauge WinTV HVR 900 digital */
96static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = {
97 {EM28XX_R08_GPIO, 0x2e, ~EM_GPIO_4, 10},
98 {EM2880_R04_GPO, 0x04, 0x0f, 10},
99 {EM2880_R04_GPO, 0x0c, 0x0f, 10},
100 { -1, -1, -1, -1},
101};
102
103/* Board Hauppauge WinTV HVR 900 (R2) digital */
104static struct em28xx_reg_seq hauppauge_wintv_hvr_900R2_digital[] = {
105 {EM28XX_R08_GPIO, 0x2e, ~EM_GPIO_4, 10},
106 {EM2880_R04_GPO, 0x0c, 0x0f, 10},
107 { -1, -1, -1, -1},
108};
109
110/* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
111static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = {
112 {EM28XX_R08_GPIO, 0x69, ~EM_GPIO_4, 10},
113 { -1, -1, -1, -1},
114};
115
116/* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
117
118/* Board - EM2870 Kworld 355u
119 Analog - No input analog */
120
121/* Board - EM2882 Kworld 315U digital */
122static struct em28xx_reg_seq em2882_kworld_315u_digital[] = {
123 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
124 {EM28XX_R08_GPIO, 0xfe, 0xff, 10},
125 {EM2880_R04_GPO, 0x04, 0xff, 10},
126 {EM2880_R04_GPO, 0x0c, 0xff, 10},
127 {EM28XX_R08_GPIO, 0x7e, 0xff, 10},
128 { -1, -1, -1, -1},
129};
130
131static struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = {
132 {EM2880_R04_GPO, 0x08, 0xff, 10},
133 {EM2880_R04_GPO, 0x0c, 0xff, 10},
134 {EM2880_R04_GPO, 0x08, 0xff, 10},
135 {EM2880_R04_GPO, 0x0c, 0xff, 10},
136 { -1, -1, -1, -1},
137};
138
139static struct em28xx_reg_seq kworld_330u_analog[] = {
140 {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
141 {EM2880_R04_GPO, 0x00, 0xff, 10},
142 { -1, -1, -1, -1},
143};
144
145static struct em28xx_reg_seq kworld_330u_digital[] = {
146 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
147 {EM2880_R04_GPO, 0x08, 0xff, 10},
148 { -1, -1, -1, -1},
149};
150
151/* Evga inDtube
152 GPIO0 - Enable digital power (s5h1409) - low to enable
153 GPIO1 - Enable analog power (tvp5150/emp202) - low to enable
154 GPIO4 - xc3028 reset
155 GOP3 - s5h1409 reset
156 */
157static struct em28xx_reg_seq evga_indtube_analog[] = {
158 {EM28XX_R08_GPIO, 0x79, 0xff, 60},
159 { -1, -1, -1, -1},
160};
161
162static struct em28xx_reg_seq evga_indtube_digital[] = {
163 {EM28XX_R08_GPIO, 0x7a, 0xff, 1},
164 {EM2880_R04_GPO, 0x04, 0xff, 10},
165 {EM2880_R04_GPO, 0x0c, 0xff, 1},
166 { -1, -1, -1, -1},
167};
168
169/*
170 * KWorld PlusTV 340U and UB435-Q (ATSC) GPIOs map:
171 * EM_GPIO_0 - currently unknown
172 * EM_GPIO_1 - LED disable/enable (1 = off, 0 = on)
173 * EM_GPIO_2 - currently unknown
174 * EM_GPIO_3 - currently unknown
175 * EM_GPIO_4 - TDA18271HD/C1 tuner (1 = active, 0 = in reset)
176 * EM_GPIO_5 - LGDT3304 ATSC/QAM demod (1 = active, 0 = in reset)
177 * EM_GPIO_6 - currently unknown
178 * EM_GPIO_7 - currently unknown
179 */
180static struct em28xx_reg_seq kworld_a340_digital[] = {
181 {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
182 { -1, -1, -1, -1},
183};
184
185/* Pinnacle Hybrid Pro eb1a:2881 */
186static struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = {
187 {EM28XX_R08_GPIO, 0xfd, ~EM_GPIO_4, 10},
188 { -1, -1, -1, -1},
189};
190
191static struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = {
192 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
193 {EM2880_R04_GPO, 0x04, 0xff, 100},/* zl10353 reset */
194 {EM2880_R04_GPO, 0x0c, 0xff, 1},
195 { -1, -1, -1, -1},
196};
197
198static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_analog[] = {
199 {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
200 {EM2880_R04_GPO, 0x00, 0xff, 10},
201 { -1, -1, -1, -1},
202};
203
204static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_digital[] = {
205 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
206 {EM2880_R04_GPO, 0x08, 0xff, 10},
207 { -1, -1, -1, -1},
208};
209
210/* eb1a:2868 Reddo DVB-C USB TV Box
211 GPIO4 - CU1216L NIM
212 Other GPIOs seems to be don't care. */
213static struct em28xx_reg_seq reddo_dvb_c_usb_box[] = {
214 {EM28XX_R08_GPIO, 0xfe, 0xff, 10},
215 {EM28XX_R08_GPIO, 0xde, 0xff, 10},
216 {EM28XX_R08_GPIO, 0xfe, 0xff, 10},
217 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
218 {EM28XX_R08_GPIO, 0x7f, 0xff, 10},
219 {EM28XX_R08_GPIO, 0x6f, 0xff, 10},
220 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
221 {-1, -1, -1, -1},
222};
223
224/* Callback for the most boards */
225static struct em28xx_reg_seq default_tuner_gpio[] = {
226 {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10},
227 {EM28XX_R08_GPIO, 0, EM_GPIO_4, 10},
228 {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10},
229 { -1, -1, -1, -1},
230};
231
232/* Mute/unmute */
233static struct em28xx_reg_seq compro_unmute_tv_gpio[] = {
234 {EM28XX_R08_GPIO, 5, 7, 10},
235 { -1, -1, -1, -1},
236};
237
238static struct em28xx_reg_seq compro_unmute_svid_gpio[] = {
239 {EM28XX_R08_GPIO, 4, 7, 10},
240 { -1, -1, -1, -1},
241};
242
243static struct em28xx_reg_seq compro_mute_gpio[] = {
244 {EM28XX_R08_GPIO, 6, 7, 10},
245 { -1, -1, -1, -1},
246};
247
248/* Terratec AV350 */
249static struct em28xx_reg_seq terratec_av350_mute_gpio[] = {
250 {EM28XX_R08_GPIO, 0xff, 0x7f, 10},
251 { -1, -1, -1, -1},
252};
253
254static struct em28xx_reg_seq terratec_av350_unmute_gpio[] = {
255 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
256 { -1, -1, -1, -1},
257};
258
259static struct em28xx_reg_seq silvercrest_reg_seq[] = {
260 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
261 {EM28XX_R08_GPIO, 0x01, 0xf7, 10},
262 { -1, -1, -1, -1},
263};
264
265static struct em28xx_reg_seq vc211a_enable[] = {
266 {EM28XX_R08_GPIO, 0xff, 0x07, 10},
267 {EM28XX_R08_GPIO, 0xff, 0x0f, 10},
268 {EM28XX_R08_GPIO, 0xff, 0x0b, 10},
269 { -1, -1, -1, -1},
270};
271
272static struct em28xx_reg_seq dikom_dk300_digital[] = {
273 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
274 {EM2880_R04_GPO, 0x08, 0xff, 10},
275 { -1, -1, -1, -1},
276};
277
278
279/* Reset for the most [digital] boards */
280static struct em28xx_reg_seq leadership_digital[] = {
281 {EM2874_R80_GPIO, 0x70, 0xff, 10},
282 { -1, -1, -1, -1},
283};
284
285static struct em28xx_reg_seq leadership_reset[] = {
286 {EM2874_R80_GPIO, 0xf0, 0xff, 10},
287 {EM2874_R80_GPIO, 0xb0, 0xff, 10},
288 {EM2874_R80_GPIO, 0xf0, 0xff, 10},
289 { -1, -1, -1, -1},
290};
291
292/* 2013:024f PCTV Systems nanoStick T2 290e
293 * GPIO_6 - demod reset
294 * GPIO_7 - LED
295 */
296static struct em28xx_reg_seq pctv_290e[] = {
297 {EM2874_R80_GPIO, 0x00, 0xff, 80},
298 {EM2874_R80_GPIO, 0x40, 0xff, 80}, /* GPIO_6 = 1 */
299 {EM2874_R80_GPIO, 0xc0, 0xff, 80}, /* GPIO_7 = 1 */
300 {-1, -1, -1, -1},
301};
302
303/*
304 * Board definitions
305 */
306struct em28xx_board em28xx_boards[] = {
307 [EM2750_BOARD_UNKNOWN] = {
308 .name = "EM2710/EM2750/EM2751 webcam grabber",
309 .xclk = EM28XX_XCLK_FREQUENCY_20MHZ,
310 .tuner_type = TUNER_ABSENT,
311 .is_webcam = 1,
312 .input = { {
313 .type = EM28XX_VMUX_COMPOSITE1,
314 .vmux = 0,
315 .amux = EM28XX_AMUX_VIDEO,
316 .gpio = silvercrest_reg_seq,
317 } },
318 },
319 [EM2800_BOARD_UNKNOWN] = {
320 .name = "Unknown EM2800 video grabber",
321 .is_em2800 = 1,
322 .tda9887_conf = TDA9887_PRESENT,
323 .decoder = EM28XX_SAA711X,
324 .tuner_type = TUNER_ABSENT,
325 .input = { {
326 .type = EM28XX_VMUX_COMPOSITE1,
327 .vmux = SAA7115_COMPOSITE0,
328 .amux = EM28XX_AMUX_LINE_IN,
329 }, {
330 .type = EM28XX_VMUX_SVIDEO,
331 .vmux = SAA7115_SVIDEO3,
332 .amux = EM28XX_AMUX_LINE_IN,
333 } },
334 },
335 [EM2820_BOARD_UNKNOWN] = {
336 .name = "Unknown EM2750/28xx video grabber",
337 .tuner_type = TUNER_ABSENT,
338 .is_webcam = 1, /* To enable sensor probe */
339 },
340 [EM2750_BOARD_DLCW_130] = {
341 /* Beijing Huaqi Information Digital Technology Co., Ltd */
342 .name = "Huaqi DLCW-130",
343 .valid = EM28XX_BOARD_NOT_VALIDATED,
344 .xclk = EM28XX_XCLK_FREQUENCY_48MHZ,
345 .tuner_type = TUNER_ABSENT,
346 .is_webcam = 1,
347 .input = { {
348 .type = EM28XX_VMUX_COMPOSITE1,
349 .vmux = 0,
350 .amux = EM28XX_AMUX_VIDEO,
351 } },
352 },
353 [EM2820_BOARD_KWORLD_PVRTV2800RF] = {
354 .name = "Kworld PVR TV 2800 RF",
355 .tuner_type = TUNER_TEMIC_PAL,
356 .tda9887_conf = TDA9887_PRESENT,
357 .decoder = EM28XX_SAA711X,
358 .input = { {
359 .type = EM28XX_VMUX_COMPOSITE1,
360 .vmux = SAA7115_COMPOSITE0,
361 .amux = EM28XX_AMUX_LINE_IN,
362 }, {
363 .type = EM28XX_VMUX_SVIDEO,
364 .vmux = SAA7115_SVIDEO3,
365 .amux = EM28XX_AMUX_LINE_IN,
366 } },
367 },
368 [EM2820_BOARD_GADMEI_TVR200] = {
369 .name = "Gadmei TVR200",
370 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
371 .tda9887_conf = TDA9887_PRESENT,
372 .decoder = EM28XX_SAA711X,
373 .input = { {
374 .type = EM28XX_VMUX_TELEVISION,
375 .vmux = SAA7115_COMPOSITE2,
376 .amux = EM28XX_AMUX_LINE_IN,
377 }, {
378 .type = EM28XX_VMUX_COMPOSITE1,
379 .vmux = SAA7115_COMPOSITE0,
380 .amux = EM28XX_AMUX_LINE_IN,
381 }, {
382 .type = EM28XX_VMUX_SVIDEO,
383 .vmux = SAA7115_SVIDEO3,
384 .amux = EM28XX_AMUX_LINE_IN,
385 } },
386 },
387 [EM2820_BOARD_TERRATEC_CINERGY_250] = {
388 .name = "Terratec Cinergy 250 USB",
389 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
390 .has_ir_i2c = 1,
391 .tda9887_conf = TDA9887_PRESENT,
392 .decoder = EM28XX_SAA711X,
393 .input = { {
394 .type = EM28XX_VMUX_TELEVISION,
395 .vmux = SAA7115_COMPOSITE2,
396 .amux = EM28XX_AMUX_LINE_IN,
397 }, {
398 .type = EM28XX_VMUX_COMPOSITE1,
399 .vmux = SAA7115_COMPOSITE0,
400 .amux = EM28XX_AMUX_LINE_IN,
401 }, {
402 .type = EM28XX_VMUX_SVIDEO,
403 .vmux = SAA7115_SVIDEO3,
404 .amux = EM28XX_AMUX_LINE_IN,
405 } },
406 },
407 [EM2820_BOARD_PINNACLE_USB_2] = {
408 .name = "Pinnacle PCTV USB 2",
409 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
410 .has_ir_i2c = 1,
411 .tda9887_conf = TDA9887_PRESENT,
412 .decoder = EM28XX_SAA711X,
413 .input = { {
414 .type = EM28XX_VMUX_TELEVISION,
415 .vmux = SAA7115_COMPOSITE2,
416 .amux = EM28XX_AMUX_VIDEO,
417 }, {
418 .type = EM28XX_VMUX_COMPOSITE1,
419 .vmux = SAA7115_COMPOSITE0,
420 .amux = EM28XX_AMUX_LINE_IN,
421 }, {
422 .type = EM28XX_VMUX_SVIDEO,
423 .vmux = SAA7115_SVIDEO3,
424 .amux = EM28XX_AMUX_LINE_IN,
425 } },
426 },
427 [EM2820_BOARD_HAUPPAUGE_WINTV_USB_2] = {
428 .name = "Hauppauge WinTV USB 2",
429 .tuner_type = TUNER_PHILIPS_FM1236_MK3,
430 .tda9887_conf = TDA9887_PRESENT |
431 TDA9887_PORT1_ACTIVE |
432 TDA9887_PORT2_ACTIVE,
433 .decoder = EM28XX_TVP5150,
434 .has_msp34xx = 1,
435 .has_ir_i2c = 1,
436 .input = { {
437 .type = EM28XX_VMUX_TELEVISION,
438 .vmux = TVP5150_COMPOSITE0,
439 .amux = MSP_INPUT_DEFAULT,
440 }, {
441 .type = EM28XX_VMUX_SVIDEO,
442 .vmux = TVP5150_SVIDEO,
443 .amux = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1,
444 MSP_DSP_IN_SCART, MSP_DSP_IN_SCART),
445 } },
446 },
447 [EM2820_BOARD_DLINK_USB_TV] = {
448 .name = "D-Link DUB-T210 TV Tuner",
449 .valid = EM28XX_BOARD_NOT_VALIDATED,
450 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
451 .tda9887_conf = TDA9887_PRESENT,
452 .decoder = EM28XX_SAA711X,
453 .input = { {
454 .type = EM28XX_VMUX_TELEVISION,
455 .vmux = SAA7115_COMPOSITE2,
456 .amux = EM28XX_AMUX_LINE_IN,
457 }, {
458 .type = EM28XX_VMUX_COMPOSITE1,
459 .vmux = SAA7115_COMPOSITE0,
460 .amux = EM28XX_AMUX_LINE_IN,
461 }, {
462 .type = EM28XX_VMUX_SVIDEO,
463 .vmux = SAA7115_SVIDEO3,
464 .amux = EM28XX_AMUX_LINE_IN,
465 } },
466 },
467 [EM2820_BOARD_HERCULES_SMART_TV_USB2] = {
468 .name = "Hercules Smart TV USB 2.0",
469 .valid = EM28XX_BOARD_NOT_VALIDATED,
470 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
471 .tda9887_conf = TDA9887_PRESENT,
472 .decoder = EM28XX_SAA711X,
473 .input = { {
474 .type = EM28XX_VMUX_TELEVISION,
475 .vmux = SAA7115_COMPOSITE2,
476 .amux = EM28XX_AMUX_LINE_IN,
477 }, {
478 .type = EM28XX_VMUX_COMPOSITE1,
479 .vmux = SAA7115_COMPOSITE0,
480 .amux = EM28XX_AMUX_LINE_IN,
481 }, {
482 .type = EM28XX_VMUX_SVIDEO,
483 .vmux = SAA7115_SVIDEO3,
484 .amux = EM28XX_AMUX_LINE_IN,
485 } },
486 },
487 [EM2820_BOARD_PINNACLE_USB_2_FM1216ME] = {
488 .name = "Pinnacle PCTV USB 2 (Philips FM1216ME)",
489 .valid = EM28XX_BOARD_NOT_VALIDATED,
490 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
491 .tda9887_conf = TDA9887_PRESENT,
492 .decoder = EM28XX_SAA711X,
493 .input = { {
494 .type = EM28XX_VMUX_TELEVISION,
495 .vmux = SAA7115_COMPOSITE2,
496 .amux = EM28XX_AMUX_VIDEO,
497 }, {
498 .type = EM28XX_VMUX_COMPOSITE1,
499 .vmux = SAA7115_COMPOSITE0,
500 .amux = EM28XX_AMUX_LINE_IN,
501 }, {
502 .type = EM28XX_VMUX_SVIDEO,
503 .vmux = SAA7115_SVIDEO3,
504 .amux = EM28XX_AMUX_LINE_IN,
505 } },
506 },
507 [EM2820_BOARD_GADMEI_UTV310] = {
508 .name = "Gadmei UTV310",
509 .valid = EM28XX_BOARD_NOT_VALIDATED,
510 .tuner_type = TUNER_TNF_5335MF,
511 .tda9887_conf = TDA9887_PRESENT,
512 .decoder = EM28XX_SAA711X,
513 .input = { {
514 .type = EM28XX_VMUX_TELEVISION,
515 .vmux = SAA7115_COMPOSITE1,
516 .amux = EM28XX_AMUX_LINE_IN,
517 }, {
518 .type = EM28XX_VMUX_COMPOSITE1,
519 .vmux = SAA7115_COMPOSITE0,
520 .amux = EM28XX_AMUX_LINE_IN,
521 }, {
522 .type = EM28XX_VMUX_SVIDEO,
523 .vmux = SAA7115_SVIDEO3,
524 .amux = EM28XX_AMUX_LINE_IN,
525 } },
526 },
527 [EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE] = {
528 .name = "Leadtek Winfast USB II Deluxe",
529 .valid = EM28XX_BOARD_NOT_VALIDATED,
530 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
531 .has_ir_i2c = 1,
532 .tvaudio_addr = 0x58,
533 .tda9887_conf = TDA9887_PRESENT |
534 TDA9887_PORT2_ACTIVE |
535 TDA9887_QSS,
536 .decoder = EM28XX_SAA711X,
537 .adecoder = EM28XX_TVAUDIO,
538 .input = { {
539 .type = EM28XX_VMUX_TELEVISION,
540 .vmux = SAA7115_COMPOSITE4,
541 .amux = EM28XX_AMUX_AUX,
542 }, {
543 .type = EM28XX_VMUX_COMPOSITE1,
544 .vmux = SAA7115_COMPOSITE5,
545 .amux = EM28XX_AMUX_LINE_IN,
546 }, {
547 .type = EM28XX_VMUX_SVIDEO,
548 .vmux = SAA7115_SVIDEO3,
549 .amux = EM28XX_AMUX_LINE_IN,
550 } },
551 .radio = {
552 .type = EM28XX_RADIO,
553 .amux = EM28XX_AMUX_AUX,
554 }
555 },
556 [EM2820_BOARD_VIDEOLOGY_20K14XUSB] = {
557 .name = "Videology 20K14XUSB USB2.0",
558 .valid = EM28XX_BOARD_NOT_VALIDATED,
559 .tuner_type = TUNER_ABSENT,
560 .is_webcam = 1,
561 .input = { {
562 .type = EM28XX_VMUX_COMPOSITE1,
563 .vmux = 0,
564 .amux = EM28XX_AMUX_VIDEO,
565 } },
566 },
567 [EM2820_BOARD_SILVERCREST_WEBCAM] = {
568 .name = "Silvercrest Webcam 1.3mpix",
569 .tuner_type = TUNER_ABSENT,
570 .is_webcam = 1,
571 .input = { {
572 .type = EM28XX_VMUX_COMPOSITE1,
573 .vmux = 0,
574 .amux = EM28XX_AMUX_VIDEO,
575 .gpio = silvercrest_reg_seq,
576 } },
577 },
578 [EM2821_BOARD_SUPERCOMP_USB_2] = {
579 .name = "Supercomp USB 2.0 TV",
580 .valid = EM28XX_BOARD_NOT_VALIDATED,
581 .tuner_type = TUNER_PHILIPS_FM1236_MK3,
582 .tda9887_conf = TDA9887_PRESENT |
583 TDA9887_PORT1_ACTIVE |
584 TDA9887_PORT2_ACTIVE,
585 .decoder = EM28XX_SAA711X,
586 .input = { {
587 .type = EM28XX_VMUX_TELEVISION,
588 .vmux = SAA7115_COMPOSITE2,
589 .amux = EM28XX_AMUX_LINE_IN,
590 }, {
591 .type = EM28XX_VMUX_COMPOSITE1,
592 .vmux = SAA7115_COMPOSITE0,
593 .amux = EM28XX_AMUX_VIDEO,
594 }, {
595 .type = EM28XX_VMUX_SVIDEO,
596 .vmux = SAA7115_SVIDEO3,
597 .amux = EM28XX_AMUX_LINE_IN,
598 } },
599 },
600 [EM2821_BOARD_USBGEAR_VD204] = {
601 .name = "Usbgear VD204v9",
602 .valid = EM28XX_BOARD_NOT_VALIDATED,
603 .tuner_type = TUNER_ABSENT, /* Capture only device */
604 .decoder = EM28XX_SAA711X,
605 .input = { {
606 .type = EM28XX_VMUX_COMPOSITE1,
607 .vmux = SAA7115_COMPOSITE0,
608 .amux = EM28XX_AMUX_LINE_IN,
609 }, {
610 .type = EM28XX_VMUX_SVIDEO,
611 .vmux = SAA7115_SVIDEO3,
612 .amux = EM28XX_AMUX_LINE_IN,
613 } },
614 },
615 [EM2860_BOARD_NETGMBH_CAM] = {
616 /* Beijing Huaqi Information Digital Technology Co., Ltd */
617 .name = "NetGMBH Cam",
618 .valid = EM28XX_BOARD_NOT_VALIDATED,
619 .tuner_type = TUNER_ABSENT,
620 .is_webcam = 1,
621 .input = { {
622 .type = EM28XX_VMUX_COMPOSITE1,
623 .vmux = 0,
624 .amux = EM28XX_AMUX_VIDEO,
625 } },
626 },
627 [EM2860_BOARD_TYPHOON_DVD_MAKER] = {
628 .name = "Typhoon DVD Maker",
629 .decoder = EM28XX_SAA711X,
630 .tuner_type = TUNER_ABSENT, /* Capture only device */
631 .input = { {
632 .type = EM28XX_VMUX_COMPOSITE1,
633 .vmux = SAA7115_COMPOSITE0,
634 .amux = EM28XX_AMUX_LINE_IN,
635 }, {
636 .type = EM28XX_VMUX_SVIDEO,
637 .vmux = SAA7115_SVIDEO3,
638 .amux = EM28XX_AMUX_LINE_IN,
639 } },
640 },
641 [EM2860_BOARD_GADMEI_UTV330] = {
642 .name = "Gadmei UTV330",
643 .valid = EM28XX_BOARD_NOT_VALIDATED,
644 .tuner_type = TUNER_TNF_5335MF,
645 .tda9887_conf = TDA9887_PRESENT,
646 .decoder = EM28XX_SAA711X,
647 .input = { {
648 .type = EM28XX_VMUX_TELEVISION,
649 .vmux = SAA7115_COMPOSITE2,
650 .amux = EM28XX_AMUX_VIDEO,
651 }, {
652 .type = EM28XX_VMUX_COMPOSITE1,
653 .vmux = SAA7115_COMPOSITE0,
654 .amux = EM28XX_AMUX_LINE_IN,
655 }, {
656 .type = EM28XX_VMUX_SVIDEO,
657 .vmux = SAA7115_SVIDEO3,
658 .amux = EM28XX_AMUX_LINE_IN,
659 } },
660 },
661 [EM2861_BOARD_GADMEI_UTV330PLUS] = {
662 .name = "Gadmei UTV330+",
663 .tuner_type = TUNER_TNF_5335MF,
664 .tda9887_conf = TDA9887_PRESENT,
665 .ir_codes = RC_MAP_GADMEI_RM008Z,
666 .decoder = EM28XX_SAA711X,
667 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
668 .input = { {
669 .type = EM28XX_VMUX_TELEVISION,
670 .vmux = SAA7115_COMPOSITE2,
671 .amux = EM28XX_AMUX_VIDEO,
672 }, {
673 .type = EM28XX_VMUX_COMPOSITE1,
674 .vmux = SAA7115_COMPOSITE0,
675 .amux = EM28XX_AMUX_LINE_IN,
676 }, {
677 .type = EM28XX_VMUX_SVIDEO,
678 .vmux = SAA7115_SVIDEO3,
679 .amux = EM28XX_AMUX_LINE_IN,
680 } },
681 },
682 [EM2860_BOARD_TERRATEC_HYBRID_XS] = {
683 .name = "Terratec Cinergy A Hybrid XS",
684 .valid = EM28XX_BOARD_NOT_VALIDATED,
685 .tuner_type = TUNER_XC2028,
686 .tuner_gpio = default_tuner_gpio,
687 .decoder = EM28XX_TVP5150,
688
689 .input = { {
690 .type = EM28XX_VMUX_TELEVISION,
691 .vmux = TVP5150_COMPOSITE0,
692 .amux = EM28XX_AMUX_VIDEO,
693 .gpio = hauppauge_wintv_hvr_900_analog,
694 }, {
695 .type = EM28XX_VMUX_COMPOSITE1,
696 .vmux = TVP5150_COMPOSITE1,
697 .amux = EM28XX_AMUX_LINE_IN,
698 .gpio = hauppauge_wintv_hvr_900_analog,
699 }, {
700 .type = EM28XX_VMUX_SVIDEO,
701 .vmux = TVP5150_SVIDEO,
702 .amux = EM28XX_AMUX_LINE_IN,
703 .gpio = hauppauge_wintv_hvr_900_analog,
704 } },
705 },
706 [EM2861_BOARD_KWORLD_PVRTV_300U] = {
707 .name = "KWorld PVRTV 300U",
708 .valid = EM28XX_BOARD_NOT_VALIDATED,
709 .tuner_type = TUNER_XC2028,
710 .tuner_gpio = default_tuner_gpio,
711 .decoder = EM28XX_TVP5150,
712 .input = { {
713 .type = EM28XX_VMUX_TELEVISION,
714 .vmux = TVP5150_COMPOSITE0,
715 .amux = EM28XX_AMUX_VIDEO,
716 }, {
717 .type = EM28XX_VMUX_COMPOSITE1,
718 .vmux = TVP5150_COMPOSITE1,
719 .amux = EM28XX_AMUX_LINE_IN,
720 }, {
721 .type = EM28XX_VMUX_SVIDEO,
722 .vmux = TVP5150_SVIDEO,
723 .amux = EM28XX_AMUX_LINE_IN,
724 } },
725 },
726 [EM2861_BOARD_YAKUMO_MOVIE_MIXER] = {
727 .name = "Yakumo MovieMixer",
728 .tuner_type = TUNER_ABSENT, /* Capture only device */
729 .decoder = EM28XX_TVP5150,
730 .input = { {
731 .type = EM28XX_VMUX_TELEVISION,
732 .vmux = TVP5150_COMPOSITE0,
733 .amux = EM28XX_AMUX_VIDEO,
734 }, {
735 .type = EM28XX_VMUX_COMPOSITE1,
736 .vmux = TVP5150_COMPOSITE1,
737 .amux = EM28XX_AMUX_LINE_IN,
738 }, {
739 .type = EM28XX_VMUX_SVIDEO,
740 .vmux = TVP5150_SVIDEO,
741 .amux = EM28XX_AMUX_LINE_IN,
742 } },
743 },
744 [EM2860_BOARD_TVP5150_REFERENCE_DESIGN] = {
745 .name = "EM2860/TVP5150 Reference Design",
746 .tuner_type = TUNER_ABSENT, /* Capture only device */
747 .decoder = EM28XX_TVP5150,
748 .input = { {
749 .type = EM28XX_VMUX_COMPOSITE1,
750 .vmux = TVP5150_COMPOSITE1,
751 .amux = EM28XX_AMUX_LINE_IN,
752 }, {
753 .type = EM28XX_VMUX_SVIDEO,
754 .vmux = TVP5150_SVIDEO,
755 .amux = EM28XX_AMUX_LINE_IN,
756 } },
757 },
758 [EM2861_BOARD_PLEXTOR_PX_TV100U] = {
759 .name = "Plextor ConvertX PX-TV100U",
760 .tuner_type = TUNER_TNF_5335MF,
761 .xclk = EM28XX_XCLK_I2S_MSB_TIMING |
762 EM28XX_XCLK_FREQUENCY_12MHZ,
763 .tda9887_conf = TDA9887_PRESENT,
764 .decoder = EM28XX_TVP5150,
765 .has_msp34xx = 1,
766 .input = { {
767 .type = EM28XX_VMUX_TELEVISION,
768 .vmux = TVP5150_COMPOSITE0,
769 .amux = EM28XX_AMUX_LINE_IN,
770 .gpio = pinnacle_hybrid_pro_analog,
771 }, {
772 .type = EM28XX_VMUX_COMPOSITE1,
773 .vmux = TVP5150_COMPOSITE1,
774 .amux = EM28XX_AMUX_LINE_IN,
775 .gpio = pinnacle_hybrid_pro_analog,
776 }, {
777 .type = EM28XX_VMUX_SVIDEO,
778 .vmux = TVP5150_SVIDEO,
779 .amux = EM28XX_AMUX_LINE_IN,
780 .gpio = pinnacle_hybrid_pro_analog,
781 } },
782 },
783
784 /* Those boards with em2870 are DVB Only*/
785
786 [EM2870_BOARD_TERRATEC_XS] = {
787 .name = "Terratec Cinergy T XS",
788 .valid = EM28XX_BOARD_NOT_VALIDATED,
789 .tuner_type = TUNER_XC2028,
790 .tuner_gpio = default_tuner_gpio,
791 },
792 [EM2870_BOARD_TERRATEC_XS_MT2060] = {
793 .name = "Terratec Cinergy T XS (MT2060)",
794 .valid = EM28XX_BOARD_NOT_VALIDATED,
795 .tuner_type = TUNER_ABSENT, /* MT2060 */
796 },
797 [EM2870_BOARD_KWORLD_350U] = {
798 .name = "Kworld 350 U DVB-T",
799 .valid = EM28XX_BOARD_NOT_VALIDATED,
800 .tuner_type = TUNER_XC2028,
801 .tuner_gpio = default_tuner_gpio,
802 },
803 [EM2870_BOARD_KWORLD_355U] = {
804 .name = "Kworld 355 U DVB-T",
805 .valid = EM28XX_BOARD_NOT_VALIDATED,
806 },
807 [EM2870_BOARD_PINNACLE_PCTV_DVB] = {
808 .name = "Pinnacle PCTV DVB-T",
809 .valid = EM28XX_BOARD_NOT_VALIDATED,
810 .tuner_type = TUNER_ABSENT, /* MT2060 */
811 /* djh - I have serious doubts this is right... */
812 .xclk = EM28XX_XCLK_IR_RC5_MODE |
813 EM28XX_XCLK_FREQUENCY_10MHZ,
814 },
815 [EM2870_BOARD_COMPRO_VIDEOMATE] = {
816 .name = "Compro, VideoMate U3",
817 .valid = EM28XX_BOARD_NOT_VALIDATED,
818 .tuner_type = TUNER_ABSENT, /* MT2060 */
819 },
820
821 [EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = {
822 .name = "Terratec Hybrid XS Secam",
823 .has_msp34xx = 1,
824 .tuner_type = TUNER_XC2028,
825 .tuner_gpio = default_tuner_gpio,
826 .decoder = EM28XX_TVP5150,
827 .has_dvb = 1,
828 .dvb_gpio = terratec_cinergy_USB_XS_FR_digital,
829 .input = { {
830 .type = EM28XX_VMUX_TELEVISION,
831 .vmux = TVP5150_COMPOSITE0,
832 .amux = EM28XX_AMUX_VIDEO,
833 .gpio = terratec_cinergy_USB_XS_FR_analog,
834 }, {
835 .type = EM28XX_VMUX_COMPOSITE1,
836 .vmux = TVP5150_COMPOSITE1,
837 .amux = EM28XX_AMUX_LINE_IN,
838 .gpio = terratec_cinergy_USB_XS_FR_analog,
839 }, {
840 .type = EM28XX_VMUX_SVIDEO,
841 .vmux = TVP5150_SVIDEO,
842 .amux = EM28XX_AMUX_LINE_IN,
843 .gpio = terratec_cinergy_USB_XS_FR_analog,
844 } },
845 },
846 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = {
847 .name = "Hauppauge WinTV HVR 900",
848 .tda9887_conf = TDA9887_PRESENT,
849 .tuner_type = TUNER_XC2028,
850 .tuner_gpio = default_tuner_gpio,
851 .mts_firmware = 1,
852 .has_dvb = 1,
853 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
854 .ir_codes = RC_MAP_HAUPPAUGE,
855 .decoder = EM28XX_TVP5150,
856 .input = { {
857 .type = EM28XX_VMUX_TELEVISION,
858 .vmux = TVP5150_COMPOSITE0,
859 .amux = EM28XX_AMUX_VIDEO,
860 .gpio = hauppauge_wintv_hvr_900_analog,
861 }, {
862 .type = EM28XX_VMUX_COMPOSITE1,
863 .vmux = TVP5150_COMPOSITE1,
864 .amux = EM28XX_AMUX_LINE_IN,
865 .gpio = hauppauge_wintv_hvr_900_analog,
866 }, {
867 .type = EM28XX_VMUX_SVIDEO,
868 .vmux = TVP5150_SVIDEO,
869 .amux = EM28XX_AMUX_LINE_IN,
870 .gpio = hauppauge_wintv_hvr_900_analog,
871 } },
872 },
873 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = {
874 .name = "Hauppauge WinTV HVR 900 (R2)",
875 .tda9887_conf = TDA9887_PRESENT,
876 .tuner_type = TUNER_XC2028,
877 .tuner_gpio = default_tuner_gpio,
878 .mts_firmware = 1,
879 .has_dvb = 1,
880 .dvb_gpio = hauppauge_wintv_hvr_900R2_digital,
881 .ir_codes = RC_MAP_HAUPPAUGE,
882 .decoder = EM28XX_TVP5150,
883 .input = { {
884 .type = EM28XX_VMUX_TELEVISION,
885 .vmux = TVP5150_COMPOSITE0,
886 .amux = EM28XX_AMUX_VIDEO,
887 .gpio = hauppauge_wintv_hvr_900_analog,
888 }, {
889 .type = EM28XX_VMUX_COMPOSITE1,
890 .vmux = TVP5150_COMPOSITE1,
891 .amux = EM28XX_AMUX_LINE_IN,
892 .gpio = hauppauge_wintv_hvr_900_analog,
893 }, {
894 .type = EM28XX_VMUX_SVIDEO,
895 .vmux = TVP5150_SVIDEO,
896 .amux = EM28XX_AMUX_LINE_IN,
897 .gpio = hauppauge_wintv_hvr_900_analog,
898 } },
899 },
900 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850] = {
901 .name = "Hauppauge WinTV HVR 850",
902 .tuner_type = TUNER_XC2028,
903 .tuner_gpio = default_tuner_gpio,
904 .mts_firmware = 1,
905 .has_dvb = 1,
906 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
907 .ir_codes = RC_MAP_HAUPPAUGE,
908 .decoder = EM28XX_TVP5150,
909 .input = { {
910 .type = EM28XX_VMUX_TELEVISION,
911 .vmux = TVP5150_COMPOSITE0,
912 .amux = EM28XX_AMUX_VIDEO,
913 .gpio = hauppauge_wintv_hvr_900_analog,
914 }, {
915 .type = EM28XX_VMUX_COMPOSITE1,
916 .vmux = TVP5150_COMPOSITE1,
917 .amux = EM28XX_AMUX_LINE_IN,
918 .gpio = hauppauge_wintv_hvr_900_analog,
919 }, {
920 .type = EM28XX_VMUX_SVIDEO,
921 .vmux = TVP5150_SVIDEO,
922 .amux = EM28XX_AMUX_LINE_IN,
923 .gpio = hauppauge_wintv_hvr_900_analog,
924 } },
925 },
926 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = {
927 .name = "Hauppauge WinTV HVR 950",
928 .tuner_type = TUNER_XC2028,
929 .tuner_gpio = default_tuner_gpio,
930 .mts_firmware = 1,
931 .has_dvb = 1,
932 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
933 .ir_codes = RC_MAP_HAUPPAUGE,
934 .decoder = EM28XX_TVP5150,
935 .input = { {
936 .type = EM28XX_VMUX_TELEVISION,
937 .vmux = TVP5150_COMPOSITE0,
938 .amux = EM28XX_AMUX_VIDEO,
939 .gpio = hauppauge_wintv_hvr_900_analog,
940 }, {
941 .type = EM28XX_VMUX_COMPOSITE1,
942 .vmux = TVP5150_COMPOSITE1,
943 .amux = EM28XX_AMUX_LINE_IN,
944 .gpio = hauppauge_wintv_hvr_900_analog,
945 }, {
946 .type = EM28XX_VMUX_SVIDEO,
947 .vmux = TVP5150_SVIDEO,
948 .amux = EM28XX_AMUX_LINE_IN,
949 .gpio = hauppauge_wintv_hvr_900_analog,
950 } },
951 },
952 [EM2880_BOARD_PINNACLE_PCTV_HD_PRO] = {
953 .name = "Pinnacle PCTV HD Pro Stick",
954 .tuner_type = TUNER_XC2028,
955 .tuner_gpio = default_tuner_gpio,
956 .mts_firmware = 1,
957 .has_dvb = 1,
958 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
959 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
960 .decoder = EM28XX_TVP5150,
961 .input = { {
962 .type = EM28XX_VMUX_TELEVISION,
963 .vmux = TVP5150_COMPOSITE0,
964 .amux = EM28XX_AMUX_VIDEO,
965 .gpio = hauppauge_wintv_hvr_900_analog,
966 }, {
967 .type = EM28XX_VMUX_COMPOSITE1,
968 .vmux = TVP5150_COMPOSITE1,
969 .amux = EM28XX_AMUX_LINE_IN,
970 .gpio = hauppauge_wintv_hvr_900_analog,
971 }, {
972 .type = EM28XX_VMUX_SVIDEO,
973 .vmux = TVP5150_SVIDEO,
974 .amux = EM28XX_AMUX_LINE_IN,
975 .gpio = hauppauge_wintv_hvr_900_analog,
976 } },
977 },
978 [EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = {
979 .name = "AMD ATI TV Wonder HD 600",
980 .tuner_type = TUNER_XC2028,
981 .tuner_gpio = default_tuner_gpio,
982 .mts_firmware = 1,
983 .has_dvb = 1,
984 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
985 .ir_codes = RC_MAP_ATI_TV_WONDER_HD_600,
986 .decoder = EM28XX_TVP5150,
987 .input = { {
988 .type = EM28XX_VMUX_TELEVISION,
989 .vmux = TVP5150_COMPOSITE0,
990 .amux = EM28XX_AMUX_VIDEO,
991 .gpio = hauppauge_wintv_hvr_900_analog,
992 }, {
993 .type = EM28XX_VMUX_COMPOSITE1,
994 .vmux = TVP5150_COMPOSITE1,
995 .amux = EM28XX_AMUX_LINE_IN,
996 .gpio = hauppauge_wintv_hvr_900_analog,
997 }, {
998 .type = EM28XX_VMUX_SVIDEO,
999 .vmux = TVP5150_SVIDEO,
1000 .amux = EM28XX_AMUX_LINE_IN,
1001 .gpio = hauppauge_wintv_hvr_900_analog,
1002 } },
1003 },
1004 [EM2880_BOARD_TERRATEC_HYBRID_XS] = {
1005 .name = "Terratec Hybrid XS",
1006 .tuner_type = TUNER_XC2028,
1007 .tuner_gpio = default_tuner_gpio,
1008 .decoder = EM28XX_TVP5150,
1009 .has_dvb = 1,
1010 .dvb_gpio = default_digital,
1011 .ir_codes = RC_MAP_TERRATEC_CINERGY_XS,
1012 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
1013 .input = { {
1014 .type = EM28XX_VMUX_TELEVISION,
1015 .vmux = TVP5150_COMPOSITE0,
1016 .amux = EM28XX_AMUX_VIDEO,
1017 .gpio = default_analog,
1018 }, {
1019 .type = EM28XX_VMUX_COMPOSITE1,
1020 .vmux = TVP5150_COMPOSITE1,
1021 .amux = EM28XX_AMUX_LINE_IN,
1022 .gpio = default_analog,
1023 }, {
1024 .type = EM28XX_VMUX_SVIDEO,
1025 .vmux = TVP5150_SVIDEO,
1026 .amux = EM28XX_AMUX_LINE_IN,
1027 .gpio = default_analog,
1028 } },
1029 },
1030 /* maybe there's a reason behind it why Terratec sells the Hybrid XS
1031 as Prodigy XS with a different PID, let's keep it separated for now
1032 maybe we'll need it lateron */
1033 [EM2880_BOARD_TERRATEC_PRODIGY_XS] = {
1034 .name = "Terratec Prodigy XS",
1035 .tuner_type = TUNER_XC2028,
1036 .tuner_gpio = default_tuner_gpio,
1037 .decoder = EM28XX_TVP5150,
1038 .input = { {
1039 .type = EM28XX_VMUX_TELEVISION,
1040 .vmux = TVP5150_COMPOSITE0,
1041 .amux = EM28XX_AMUX_VIDEO,
1042 .gpio = hauppauge_wintv_hvr_900_analog,
1043 }, {
1044 .type = EM28XX_VMUX_COMPOSITE1,
1045 .vmux = TVP5150_COMPOSITE1,
1046 .amux = EM28XX_AMUX_LINE_IN,
1047 .gpio = hauppauge_wintv_hvr_900_analog,
1048 }, {
1049 .type = EM28XX_VMUX_SVIDEO,
1050 .vmux = TVP5150_SVIDEO,
1051 .amux = EM28XX_AMUX_LINE_IN,
1052 .gpio = hauppauge_wintv_hvr_900_analog,
1053 } },
1054 },
1055 [EM2820_BOARD_MSI_VOX_USB_2] = {
1056 .name = "MSI VOX USB 2.0",
1057 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1058 .tda9887_conf = TDA9887_PRESENT |
1059 TDA9887_PORT1_ACTIVE |
1060 TDA9887_PORT2_ACTIVE,
1061 .max_range_640_480 = 1,
1062 .decoder = EM28XX_SAA711X,
1063 .input = { {
1064 .type = EM28XX_VMUX_TELEVISION,
1065 .vmux = SAA7115_COMPOSITE4,
1066 .amux = EM28XX_AMUX_VIDEO,
1067 }, {
1068 .type = EM28XX_VMUX_COMPOSITE1,
1069 .vmux = SAA7115_COMPOSITE0,
1070 .amux = EM28XX_AMUX_LINE_IN,
1071 }, {
1072 .type = EM28XX_VMUX_SVIDEO,
1073 .vmux = SAA7115_SVIDEO3,
1074 .amux = EM28XX_AMUX_LINE_IN,
1075 } },
1076 },
1077 [EM2800_BOARD_TERRATEC_CINERGY_200] = {
1078 .name = "Terratec Cinergy 200 USB",
1079 .is_em2800 = 1,
1080 .has_ir_i2c = 1,
1081 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1082 .tda9887_conf = TDA9887_PRESENT,
1083 .decoder = EM28XX_SAA711X,
1084 .input = { {
1085 .type = EM28XX_VMUX_TELEVISION,
1086 .vmux = SAA7115_COMPOSITE2,
1087 .amux = EM28XX_AMUX_VIDEO,
1088 }, {
1089 .type = EM28XX_VMUX_COMPOSITE1,
1090 .vmux = SAA7115_COMPOSITE0,
1091 .amux = EM28XX_AMUX_LINE_IN,
1092 }, {
1093 .type = EM28XX_VMUX_SVIDEO,
1094 .vmux = SAA7115_SVIDEO3,
1095 .amux = EM28XX_AMUX_LINE_IN,
1096 } },
1097 },
1098 [EM2800_BOARD_GRABBEEX_USB2800] = {
1099 .name = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder",
1100 .is_em2800 = 1,
1101 .decoder = EM28XX_SAA711X,
1102 .tuner_type = TUNER_ABSENT, /* capture only board */
1103 .input = { {
1104 .type = EM28XX_VMUX_COMPOSITE1,
1105 .vmux = SAA7115_COMPOSITE0,
1106 .amux = EM28XX_AMUX_LINE_IN,
1107 }, {
1108 .type = EM28XX_VMUX_SVIDEO,
1109 .vmux = SAA7115_SVIDEO3,
1110 .amux = EM28XX_AMUX_LINE_IN,
1111 } },
1112 },
1113 [EM2800_BOARD_VC211A] = {
1114 .name = "Actionmaster/LinXcel/Digitus VC211A",
1115 .is_em2800 = 1,
1116 .tuner_type = TUNER_ABSENT, /* Capture-only board */
1117 .decoder = EM28XX_SAA711X,
1118 .input = { {
1119 .type = EM28XX_VMUX_COMPOSITE1,
1120 .vmux = SAA7115_COMPOSITE0,
1121 .amux = EM28XX_AMUX_LINE_IN,
1122 .gpio = vc211a_enable,
1123 }, {
1124 .type = EM28XX_VMUX_SVIDEO,
1125 .vmux = SAA7115_SVIDEO3,
1126 .amux = EM28XX_AMUX_LINE_IN,
1127 .gpio = vc211a_enable,
1128 } },
1129 },
1130 [EM2800_BOARD_LEADTEK_WINFAST_USBII] = {
1131 .name = "Leadtek Winfast USB II",
1132 .is_em2800 = 1,
1133 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1134 .tda9887_conf = TDA9887_PRESENT,
1135 .decoder = EM28XX_SAA711X,
1136 .input = { {
1137 .type = EM28XX_VMUX_TELEVISION,
1138 .vmux = SAA7115_COMPOSITE2,
1139 .amux = EM28XX_AMUX_VIDEO,
1140 }, {
1141 .type = EM28XX_VMUX_COMPOSITE1,
1142 .vmux = SAA7115_COMPOSITE0,
1143 .amux = EM28XX_AMUX_LINE_IN,
1144 }, {
1145 .type = EM28XX_VMUX_SVIDEO,
1146 .vmux = SAA7115_SVIDEO3,
1147 .amux = EM28XX_AMUX_LINE_IN,
1148 } },
1149 },
1150 [EM2800_BOARD_KWORLD_USB2800] = {
1151 .name = "Kworld USB2800",
1152 .is_em2800 = 1,
1153 .tuner_type = TUNER_PHILIPS_FCV1236D,
1154 .tda9887_conf = TDA9887_PRESENT,
1155 .decoder = EM28XX_SAA711X,
1156 .input = { {
1157 .type = EM28XX_VMUX_TELEVISION,
1158 .vmux = SAA7115_COMPOSITE2,
1159 .amux = EM28XX_AMUX_VIDEO,
1160 }, {
1161 .type = EM28XX_VMUX_COMPOSITE1,
1162 .vmux = SAA7115_COMPOSITE0,
1163 .amux = EM28XX_AMUX_LINE_IN,
1164 }, {
1165 .type = EM28XX_VMUX_SVIDEO,
1166 .vmux = SAA7115_SVIDEO3,
1167 .amux = EM28XX_AMUX_LINE_IN,
1168 } },
1169 },
1170 [EM2820_BOARD_PINNACLE_DVC_90] = {
1171 .name = "Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker "
1172 "/ Kworld DVD Maker 2",
1173 .tuner_type = TUNER_ABSENT, /* capture only board */
1174 .decoder = EM28XX_SAA711X,
1175 .input = { {
1176 .type = EM28XX_VMUX_COMPOSITE1,
1177 .vmux = SAA7115_COMPOSITE0,
1178 .amux = EM28XX_AMUX_LINE_IN,
1179 }, {
1180 .type = EM28XX_VMUX_SVIDEO,
1181 .vmux = SAA7115_SVIDEO3,
1182 .amux = EM28XX_AMUX_LINE_IN,
1183 } },
1184 },
1185 [EM2800_BOARD_VGEAR_POCKETTV] = {
1186 .name = "V-Gear PocketTV",
1187 .is_em2800 = 1,
1188 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1189 .tda9887_conf = TDA9887_PRESENT,
1190 .decoder = EM28XX_SAA711X,
1191 .input = { {
1192 .type = EM28XX_VMUX_TELEVISION,
1193 .vmux = SAA7115_COMPOSITE2,
1194 .amux = EM28XX_AMUX_VIDEO,
1195 }, {
1196 .type = EM28XX_VMUX_COMPOSITE1,
1197 .vmux = SAA7115_COMPOSITE0,
1198 .amux = EM28XX_AMUX_LINE_IN,
1199 }, {
1200 .type = EM28XX_VMUX_SVIDEO,
1201 .vmux = SAA7115_SVIDEO3,
1202 .amux = EM28XX_AMUX_LINE_IN,
1203 } },
1204 },
1205 [EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2] = {
1206 .name = "Pixelview PlayTV Box 4 USB 2.0",
1207 .tda9887_conf = TDA9887_PRESENT,
1208 .tuner_type = TUNER_YMEC_TVF_5533MF,
1209 .decoder = EM28XX_SAA711X,
1210 .input = { {
1211 .type = EM28XX_VMUX_TELEVISION,
1212 .vmux = SAA7115_COMPOSITE2,
1213 .amux = EM28XX_AMUX_VIDEO,
1214 .aout = EM28XX_AOUT_MONO | /* I2S */
1215 EM28XX_AOUT_MASTER, /* Line out pin */
1216 }, {
1217 .type = EM28XX_VMUX_COMPOSITE1,
1218 .vmux = SAA7115_COMPOSITE0,
1219 .amux = EM28XX_AMUX_LINE_IN,
1220 }, {
1221 .type = EM28XX_VMUX_SVIDEO,
1222 .vmux = SAA7115_SVIDEO3,
1223 .amux = EM28XX_AMUX_LINE_IN,
1224 } },
1225 },
1226 [EM2820_BOARD_PROLINK_PLAYTV_USB2] = {
1227 .name = "SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0",
1228 .has_snapshot_button = 1,
1229 .tda9887_conf = TDA9887_PRESENT,
1230 .tuner_type = TUNER_YMEC_TVF_5533MF,
1231 .decoder = EM28XX_SAA711X,
1232 .input = { {
1233 .type = EM28XX_VMUX_TELEVISION,
1234 .vmux = SAA7115_COMPOSITE2,
1235 .amux = EM28XX_AMUX_VIDEO,
1236 .aout = EM28XX_AOUT_MONO | /* I2S */
1237 EM28XX_AOUT_MASTER, /* Line out pin */
1238 }, {
1239 .type = EM28XX_VMUX_COMPOSITE1,
1240 .vmux = SAA7115_COMPOSITE0,
1241 .amux = EM28XX_AMUX_LINE_IN,
1242 }, {
1243 .type = EM28XX_VMUX_SVIDEO,
1244 .vmux = SAA7115_SVIDEO3,
1245 .amux = EM28XX_AMUX_LINE_IN,
1246 } },
1247 },
1248 [EM2860_BOARD_SAA711X_REFERENCE_DESIGN] = {
1249 .name = "EM2860/SAA711X Reference Design",
1250 .has_snapshot_button = 1,
1251 .tuner_type = TUNER_ABSENT,
1252 .decoder = EM28XX_SAA711X,
1253 .input = { {
1254 .type = EM28XX_VMUX_SVIDEO,
1255 .vmux = SAA7115_SVIDEO3,
1256 }, {
1257 .type = EM28XX_VMUX_COMPOSITE1,
1258 .vmux = SAA7115_COMPOSITE0,
1259 } },
1260 },
1261
1262 [EM2874_LEADERSHIP_ISDBT] = {
1263 .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
1264 EM28XX_I2C_CLK_WAIT_ENABLE |
1265 EM28XX_I2C_FREQ_100_KHZ,
1266 .xclk = EM28XX_XCLK_FREQUENCY_10MHZ,
1267 .name = "EM2874 Leadership ISDBT",
1268 .tuner_type = TUNER_ABSENT,
1269 .tuner_gpio = leadership_reset,
1270 .dvb_gpio = leadership_digital,
1271 .has_dvb = 1,
1272 },
1273
1274 [EM2880_BOARD_MSI_DIGIVOX_AD] = {
1275 .name = "MSI DigiVox A/D",
1276 .valid = EM28XX_BOARD_NOT_VALIDATED,
1277 .tuner_type = TUNER_XC2028,
1278 .tuner_gpio = default_tuner_gpio,
1279 .decoder = EM28XX_TVP5150,
1280 .input = { {
1281 .type = EM28XX_VMUX_TELEVISION,
1282 .vmux = TVP5150_COMPOSITE0,
1283 .amux = EM28XX_AMUX_VIDEO,
1284 .gpio = em2880_msi_digivox_ad_analog,
1285 }, {
1286 .type = EM28XX_VMUX_COMPOSITE1,
1287 .vmux = TVP5150_COMPOSITE1,
1288 .amux = EM28XX_AMUX_LINE_IN,
1289 .gpio = em2880_msi_digivox_ad_analog,
1290 }, {
1291 .type = EM28XX_VMUX_SVIDEO,
1292 .vmux = TVP5150_SVIDEO,
1293 .amux = EM28XX_AMUX_LINE_IN,
1294 .gpio = em2880_msi_digivox_ad_analog,
1295 } },
1296 },
1297 [EM2880_BOARD_MSI_DIGIVOX_AD_II] = {
1298 .name = "MSI DigiVox A/D II",
1299 .valid = EM28XX_BOARD_NOT_VALIDATED,
1300 .tuner_type = TUNER_XC2028,
1301 .tuner_gpio = default_tuner_gpio,
1302 .decoder = EM28XX_TVP5150,
1303 .input = { {
1304 .type = EM28XX_VMUX_TELEVISION,
1305 .vmux = TVP5150_COMPOSITE0,
1306 .amux = EM28XX_AMUX_VIDEO,
1307 .gpio = em2880_msi_digivox_ad_analog,
1308 }, {
1309 .type = EM28XX_VMUX_COMPOSITE1,
1310 .vmux = TVP5150_COMPOSITE1,
1311 .amux = EM28XX_AMUX_LINE_IN,
1312 .gpio = em2880_msi_digivox_ad_analog,
1313 }, {
1314 .type = EM28XX_VMUX_SVIDEO,
1315 .vmux = TVP5150_SVIDEO,
1316 .amux = EM28XX_AMUX_LINE_IN,
1317 .gpio = em2880_msi_digivox_ad_analog,
1318 } },
1319 },
1320 [EM2880_BOARD_KWORLD_DVB_305U] = {
1321 .name = "KWorld DVB-T 305U",
1322 .valid = EM28XX_BOARD_NOT_VALIDATED,
1323 .tuner_type = TUNER_XC2028,
1324 .tuner_gpio = default_tuner_gpio,
1325 .decoder = EM28XX_TVP5150,
1326 .input = { {
1327 .type = EM28XX_VMUX_TELEVISION,
1328 .vmux = TVP5150_COMPOSITE0,
1329 .amux = EM28XX_AMUX_VIDEO,
1330 }, {
1331 .type = EM28XX_VMUX_COMPOSITE1,
1332 .vmux = TVP5150_COMPOSITE1,
1333 .amux = EM28XX_AMUX_LINE_IN,
1334 }, {
1335 .type = EM28XX_VMUX_SVIDEO,
1336 .vmux = TVP5150_SVIDEO,
1337 .amux = EM28XX_AMUX_LINE_IN,
1338 } },
1339 },
1340 [EM2880_BOARD_KWORLD_DVB_310U] = {
1341 .name = "KWorld DVB-T 310U",
1342 .tuner_type = TUNER_XC2028,
1343 .tuner_gpio = default_tuner_gpio,
1344 .has_dvb = 1,
1345 .dvb_gpio = default_digital,
1346 .mts_firmware = 1,
1347 .decoder = EM28XX_TVP5150,
1348 .input = { {
1349 .type = EM28XX_VMUX_TELEVISION,
1350 .vmux = TVP5150_COMPOSITE0,
1351 .amux = EM28XX_AMUX_VIDEO,
1352 .gpio = default_analog,
1353 }, {
1354 .type = EM28XX_VMUX_COMPOSITE1,
1355 .vmux = TVP5150_COMPOSITE1,
1356 .amux = EM28XX_AMUX_LINE_IN,
1357 .gpio = default_analog,
1358 }, { /* S-video has not been tested yet */
1359 .type = EM28XX_VMUX_SVIDEO,
1360 .vmux = TVP5150_SVIDEO,
1361 .amux = EM28XX_AMUX_LINE_IN,
1362 .gpio = default_analog,
1363 } },
1364 },
1365 [EM2882_BOARD_KWORLD_ATSC_315U] = {
1366 .name = "KWorld ATSC 315U HDTV TV Box",
1367 .valid = EM28XX_BOARD_NOT_VALIDATED,
1368 .tuner_type = TUNER_THOMSON_DTT761X,
1369 .tuner_gpio = em2882_kworld_315u_tuner_gpio,
1370 .tda9887_conf = TDA9887_PRESENT,
1371 .decoder = EM28XX_SAA711X,
1372 .has_dvb = 1,
1373 .dvb_gpio = em2882_kworld_315u_digital,
1374 .ir_codes = RC_MAP_KWORLD_315U,
1375 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1376 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE,
1377 /* Analog mode - still not ready */
1378 /*.input = { {
1379 .type = EM28XX_VMUX_TELEVISION,
1380 .vmux = SAA7115_COMPOSITE2,
1381 .amux = EM28XX_AMUX_VIDEO,
1382 .gpio = em2882_kworld_315u_analog,
1383 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1384 }, {
1385 .type = EM28XX_VMUX_COMPOSITE1,
1386 .vmux = SAA7115_COMPOSITE0,
1387 .amux = EM28XX_AMUX_LINE_IN,
1388 .gpio = em2882_kworld_315u_analog1,
1389 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1390 }, {
1391 .type = EM28XX_VMUX_SVIDEO,
1392 .vmux = SAA7115_SVIDEO3,
1393 .amux = EM28XX_AMUX_LINE_IN,
1394 .gpio = em2882_kworld_315u_analog1,
1395 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1396 } }, */
1397 },
1398 [EM2880_BOARD_EMPIRE_DUAL_TV] = {
1399 .name = "Empire dual TV",
1400 .tuner_type = TUNER_XC2028,
1401 .tuner_gpio = default_tuner_gpio,
1402 .has_dvb = 1,
1403 .dvb_gpio = default_digital,
1404 .mts_firmware = 1,
1405 .decoder = EM28XX_TVP5150,
1406 .input = { {
1407 .type = EM28XX_VMUX_TELEVISION,
1408 .vmux = TVP5150_COMPOSITE0,
1409 .amux = EM28XX_AMUX_VIDEO,
1410 .gpio = default_analog,
1411 }, {
1412 .type = EM28XX_VMUX_COMPOSITE1,
1413 .vmux = TVP5150_COMPOSITE1,
1414 .amux = EM28XX_AMUX_LINE_IN,
1415 .gpio = default_analog,
1416 }, {
1417 .type = EM28XX_VMUX_SVIDEO,
1418 .vmux = TVP5150_SVIDEO,
1419 .amux = EM28XX_AMUX_LINE_IN,
1420 .gpio = default_analog,
1421 } },
1422 },
1423 [EM2881_BOARD_DNT_DA2_HYBRID] = {
1424 .name = "DNT DA2 Hybrid",
1425 .valid = EM28XX_BOARD_NOT_VALIDATED,
1426 .tuner_type = TUNER_XC2028,
1427 .tuner_gpio = default_tuner_gpio,
1428 .decoder = EM28XX_TVP5150,
1429 .input = { {
1430 .type = EM28XX_VMUX_TELEVISION,
1431 .vmux = TVP5150_COMPOSITE0,
1432 .amux = EM28XX_AMUX_VIDEO,
1433 .gpio = default_analog,
1434 }, {
1435 .type = EM28XX_VMUX_COMPOSITE1,
1436 .vmux = TVP5150_COMPOSITE1,
1437 .amux = EM28XX_AMUX_LINE_IN,
1438 .gpio = default_analog,
1439 }, {
1440 .type = EM28XX_VMUX_SVIDEO,
1441 .vmux = TVP5150_SVIDEO,
1442 .amux = EM28XX_AMUX_LINE_IN,
1443 .gpio = default_analog,
1444 } },
1445 },
1446 [EM2881_BOARD_PINNACLE_HYBRID_PRO] = {
1447 .name = "Pinnacle Hybrid Pro",
1448 .tuner_type = TUNER_XC2028,
1449 .tuner_gpio = default_tuner_gpio,
1450 .decoder = EM28XX_TVP5150,
1451 .has_dvb = 1,
1452 .dvb_gpio = pinnacle_hybrid_pro_digital,
1453 .input = { {
1454 .type = EM28XX_VMUX_TELEVISION,
1455 .vmux = TVP5150_COMPOSITE0,
1456 .amux = EM28XX_AMUX_VIDEO,
1457 .gpio = pinnacle_hybrid_pro_analog,
1458 }, {
1459 .type = EM28XX_VMUX_COMPOSITE1,
1460 .vmux = TVP5150_COMPOSITE1,
1461 .amux = EM28XX_AMUX_LINE_IN,
1462 .gpio = pinnacle_hybrid_pro_analog,
1463 }, {
1464 .type = EM28XX_VMUX_SVIDEO,
1465 .vmux = TVP5150_SVIDEO,
1466 .amux = EM28XX_AMUX_LINE_IN,
1467 .gpio = pinnacle_hybrid_pro_analog,
1468 } },
1469 },
1470 [EM2882_BOARD_PINNACLE_HYBRID_PRO_330E] = {
1471 .name = "Pinnacle Hybrid Pro (330e)",
1472 .tuner_type = TUNER_XC2028,
1473 .tuner_gpio = default_tuner_gpio,
1474 .mts_firmware = 1,
1475 .has_dvb = 1,
1476 .dvb_gpio = hauppauge_wintv_hvr_900R2_digital,
1477 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
1478 .decoder = EM28XX_TVP5150,
1479 .input = { {
1480 .type = EM28XX_VMUX_TELEVISION,
1481 .vmux = TVP5150_COMPOSITE0,
1482 .amux = EM28XX_AMUX_VIDEO,
1483 .gpio = hauppauge_wintv_hvr_900_analog,
1484 }, {
1485 .type = EM28XX_VMUX_COMPOSITE1,
1486 .vmux = TVP5150_COMPOSITE1,
1487 .amux = EM28XX_AMUX_LINE_IN,
1488 .gpio = hauppauge_wintv_hvr_900_analog,
1489 }, {
1490 .type = EM28XX_VMUX_SVIDEO,
1491 .vmux = TVP5150_SVIDEO,
1492 .amux = EM28XX_AMUX_LINE_IN,
1493 .gpio = hauppauge_wintv_hvr_900_analog,
1494 } },
1495 },
1496 [EM2882_BOARD_KWORLD_VS_DVBT] = {
1497 .name = "Kworld VS-DVB-T 323UR",
1498 .tuner_type = TUNER_XC2028,
1499 .tuner_gpio = default_tuner_gpio,
1500 .decoder = EM28XX_TVP5150,
1501 .mts_firmware = 1,
1502 .has_dvb = 1,
1503 .dvb_gpio = kworld_330u_digital,
1504 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
1505 .ir_codes = RC_MAP_KWORLD_315U,
1506 .input = { {
1507 .type = EM28XX_VMUX_TELEVISION,
1508 .vmux = TVP5150_COMPOSITE0,
1509 .amux = EM28XX_AMUX_VIDEO,
1510 }, {
1511 .type = EM28XX_VMUX_COMPOSITE1,
1512 .vmux = TVP5150_COMPOSITE1,
1513 .amux = EM28XX_AMUX_LINE_IN,
1514 }, {
1515 .type = EM28XX_VMUX_SVIDEO,
1516 .vmux = TVP5150_SVIDEO,
1517 .amux = EM28XX_AMUX_LINE_IN,
1518 } },
1519 },
1520 [EM2882_BOARD_TERRATEC_HYBRID_XS] = {
1521 .name = "Terratec Cinnergy Hybrid T USB XS (em2882)",
1522 .tuner_type = TUNER_XC2028,
1523 .tuner_gpio = default_tuner_gpio,
1524 .mts_firmware = 1,
1525 .decoder = EM28XX_TVP5150,
1526 .has_dvb = 1,
1527 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
1528 .ir_codes = RC_MAP_TERRATEC_CINERGY_XS,
1529 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1530 .input = { {
1531 .type = EM28XX_VMUX_TELEVISION,
1532 .vmux = TVP5150_COMPOSITE0,
1533 .amux = EM28XX_AMUX_VIDEO,
1534 .gpio = hauppauge_wintv_hvr_900_analog,
1535 }, {
1536 .type = EM28XX_VMUX_COMPOSITE1,
1537 .vmux = TVP5150_COMPOSITE1,
1538 .amux = EM28XX_AMUX_LINE_IN,
1539 .gpio = hauppauge_wintv_hvr_900_analog,
1540 }, {
1541 .type = EM28XX_VMUX_SVIDEO,
1542 .vmux = TVP5150_SVIDEO,
1543 .amux = EM28XX_AMUX_LINE_IN,
1544 .gpio = hauppauge_wintv_hvr_900_analog,
1545 } },
1546 },
1547 [EM2882_BOARD_DIKOM_DK300] = {
1548 .name = "Dikom DK300",
1549 .tuner_type = TUNER_XC2028,
1550 .tuner_gpio = default_tuner_gpio,
1551 .decoder = EM28XX_TVP5150,
1552 .mts_firmware = 1,
1553 .has_dvb = 1,
1554 .dvb_gpio = dikom_dk300_digital,
1555 .input = { {
1556 .type = EM28XX_VMUX_TELEVISION,
1557 .vmux = TVP5150_COMPOSITE0,
1558 .amux = EM28XX_AMUX_VIDEO,
1559 .gpio = default_analog,
1560 } },
1561 },
1562 [EM2883_BOARD_KWORLD_HYBRID_330U] = {
1563 .name = "Kworld PlusTV HD Hybrid 330",
1564 .tuner_type = TUNER_XC2028,
1565 .tuner_gpio = default_tuner_gpio,
1566 .decoder = EM28XX_TVP5150,
1567 .mts_firmware = 1,
1568 .has_dvb = 1,
1569 .dvb_gpio = kworld_330u_digital,
1570 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1571 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1572 EM28XX_I2C_EEPROM_ON_BOARD |
1573 EM28XX_I2C_EEPROM_KEY_VALID,
1574 .input = { {
1575 .type = EM28XX_VMUX_TELEVISION,
1576 .vmux = TVP5150_COMPOSITE0,
1577 .amux = EM28XX_AMUX_VIDEO,
1578 .gpio = kworld_330u_analog,
1579 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1580 }, {
1581 .type = EM28XX_VMUX_COMPOSITE1,
1582 .vmux = TVP5150_COMPOSITE1,
1583 .amux = EM28XX_AMUX_LINE_IN,
1584 .gpio = kworld_330u_analog,
1585 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1586 }, {
1587 .type = EM28XX_VMUX_SVIDEO,
1588 .vmux = TVP5150_SVIDEO,
1589 .amux = EM28XX_AMUX_LINE_IN,
1590 .gpio = kworld_330u_analog,
1591 } },
1592 },
1593 [EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = {
1594 .name = "Compro VideoMate ForYou/Stereo",
1595 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1596 .tvaudio_addr = 0xb0,
1597 .tda9887_conf = TDA9887_PRESENT,
1598 .decoder = EM28XX_TVP5150,
1599 .adecoder = EM28XX_TVAUDIO,
1600 .mute_gpio = compro_mute_gpio,
1601 .input = { {
1602 .type = EM28XX_VMUX_TELEVISION,
1603 .vmux = TVP5150_COMPOSITE0,
1604 .amux = EM28XX_AMUX_VIDEO,
1605 .gpio = compro_unmute_tv_gpio,
1606 }, {
1607 .type = EM28XX_VMUX_SVIDEO,
1608 .vmux = TVP5150_SVIDEO,
1609 .amux = EM28XX_AMUX_LINE_IN,
1610 .gpio = compro_unmute_svid_gpio,
1611 } },
1612 },
1613 [EM2860_BOARD_KAIOMY_TVNPC_U2] = {
1614 .name = "Kaiomy TVnPC U2",
1615 .vchannels = 3,
1616 .tuner_type = TUNER_XC2028,
1617 .tuner_addr = 0x61,
1618 .mts_firmware = 1,
1619 .decoder = EM28XX_TVP5150,
1620 .tuner_gpio = default_tuner_gpio,
1621 .ir_codes = RC_MAP_KAIOMY,
1622 .input = { {
1623 .type = EM28XX_VMUX_TELEVISION,
1624 .vmux = TVP5150_COMPOSITE0,
1625 .amux = EM28XX_AMUX_VIDEO,
1626
1627 }, {
1628 .type = EM28XX_VMUX_COMPOSITE1,
1629 .vmux = TVP5150_COMPOSITE1,
1630 .amux = EM28XX_AMUX_LINE_IN,
1631 }, {
1632 .type = EM28XX_VMUX_SVIDEO,
1633 .vmux = TVP5150_SVIDEO,
1634 .amux = EM28XX_AMUX_LINE_IN,
1635 } },
1636 .radio = {
1637 .type = EM28XX_RADIO,
1638 .amux = EM28XX_AMUX_LINE_IN,
1639 }
1640 },
1641 [EM2860_BOARD_EASYCAP] = {
1642 .name = "Easy Cap Capture DC-60",
1643 .vchannels = 2,
1644 .tuner_type = TUNER_ABSENT,
1645 .decoder = EM28XX_SAA711X,
1646 .input = { {
1647 .type = EM28XX_VMUX_COMPOSITE1,
1648 .vmux = SAA7115_COMPOSITE0,
1649 .amux = EM28XX_AMUX_LINE_IN,
1650 }, {
1651 .type = EM28XX_VMUX_SVIDEO,
1652 .vmux = SAA7115_SVIDEO3,
1653 .amux = EM28XX_AMUX_LINE_IN,
1654 } },
1655 },
1656 [EM2820_BOARD_IODATA_GVMVP_SZ] = {
1657 .name = "IO-DATA GV-MVP/SZ",
1658 .tuner_type = TUNER_PHILIPS_FM1236_MK3,
1659 .tuner_gpio = default_tuner_gpio,
1660 .tda9887_conf = TDA9887_PRESENT,
1661 .decoder = EM28XX_TVP5150,
1662 .input = { {
1663 .type = EM28XX_VMUX_TELEVISION,
1664 .vmux = TVP5150_COMPOSITE0,
1665 .amux = EM28XX_AMUX_VIDEO,
1666 }, { /* Composite has not been tested yet */
1667 .type = EM28XX_VMUX_COMPOSITE1,
1668 .vmux = TVP5150_COMPOSITE1,
1669 .amux = EM28XX_AMUX_VIDEO,
1670 }, { /* S-video has not been tested yet */
1671 .type = EM28XX_VMUX_SVIDEO,
1672 .vmux = TVP5150_SVIDEO,
1673 .amux = EM28XX_AMUX_VIDEO,
1674 } },
1675 },
1676 [EM2860_BOARD_TERRATEC_GRABBY] = {
1677 .name = "Terratec Grabby",
1678 .vchannels = 2,
1679 .tuner_type = TUNER_ABSENT,
1680 .decoder = EM28XX_SAA711X,
1681 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1682 .input = { {
1683 .type = EM28XX_VMUX_COMPOSITE1,
1684 .vmux = SAA7115_COMPOSITE0,
1685 .amux = EM28XX_AMUX_LINE_IN,
1686 }, {
1687 .type = EM28XX_VMUX_SVIDEO,
1688 .vmux = SAA7115_SVIDEO3,
1689 .amux = EM28XX_AMUX_LINE_IN,
1690 } },
1691 },
1692 [EM2860_BOARD_TERRATEC_AV350] = {
1693 .name = "Terratec AV350",
1694 .vchannels = 2,
1695 .tuner_type = TUNER_ABSENT,
1696 .decoder = EM28XX_TVP5150,
1697 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1698 .mute_gpio = terratec_av350_mute_gpio,
1699 .input = { {
1700 .type = EM28XX_VMUX_COMPOSITE1,
1701 .vmux = TVP5150_COMPOSITE1,
1702 .amux = EM28XX_AUDIO_SRC_LINE,
1703 .gpio = terratec_av350_unmute_gpio,
1704
1705 }, {
1706 .type = EM28XX_VMUX_SVIDEO,
1707 .vmux = TVP5150_SVIDEO,
1708 .amux = EM28XX_AUDIO_SRC_LINE,
1709 .gpio = terratec_av350_unmute_gpio,
1710 } },
1711 },
1712
1713 [EM2860_BOARD_ELGATO_VIDEO_CAPTURE] = {
1714 .name = "Elgato Video Capture",
1715 .decoder = EM28XX_SAA711X,
1716 .tuner_type = TUNER_ABSENT, /* Capture only device */
1717 .input = { {
1718 .type = EM28XX_VMUX_COMPOSITE1,
1719 .vmux = SAA7115_COMPOSITE0,
1720 .amux = EM28XX_AMUX_LINE_IN,
1721 }, {
1722 .type = EM28XX_VMUX_SVIDEO,
1723 .vmux = SAA7115_SVIDEO3,
1724 .amux = EM28XX_AMUX_LINE_IN,
1725 } },
1726 },
1727
1728 [EM2882_BOARD_EVGA_INDTUBE] = {
1729 .name = "Evga inDtube",
1730 .tuner_type = TUNER_XC2028,
1731 .tuner_gpio = default_tuner_gpio,
1732 .decoder = EM28XX_TVP5150,
1733 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
1734 .mts_firmware = 1,
1735 .has_dvb = 1,
1736 .dvb_gpio = evga_indtube_digital,
1737 .ir_codes = RC_MAP_EVGA_INDTUBE,
1738 .input = { {
1739 .type = EM28XX_VMUX_TELEVISION,
1740 .vmux = TVP5150_COMPOSITE0,
1741 .amux = EM28XX_AMUX_VIDEO,
1742 .gpio = evga_indtube_analog,
1743 }, {
1744 .type = EM28XX_VMUX_COMPOSITE1,
1745 .vmux = TVP5150_COMPOSITE1,
1746 .amux = EM28XX_AMUX_LINE_IN,
1747 .gpio = evga_indtube_analog,
1748 }, {
1749 .type = EM28XX_VMUX_SVIDEO,
1750 .vmux = TVP5150_SVIDEO,
1751 .amux = EM28XX_AMUX_LINE_IN,
1752 .gpio = evga_indtube_analog,
1753 } },
1754 },
1755 /* eb1a:2868 Empia EM2870 + Philips CU1216L NIM (Philips TDA10023 +
1756 Infineon TUA6034) */
1757 [EM2870_BOARD_REDDO_DVB_C_USB_BOX] = {
1758 .name = "Reddo DVB-C USB TV Box",
1759 .tuner_type = TUNER_ABSENT,
1760 .tuner_gpio = reddo_dvb_c_usb_box,
1761 .has_dvb = 1,
1762 },
1763 /* 1b80:a340 - Empia EM2870, NXP TDA18271HD and LG DT3304, sold
1764 * initially as the KWorld PlusTV 340U, then as the UB435-Q.
1765 * Early variants have a TDA18271HD/C1, later ones a TDA18271HD/C2 */
1766 [EM2870_BOARD_KWORLD_A340] = {
1767 .name = "KWorld PlusTV 340U or UB435-Q (ATSC)",
1768 .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */
1769 .has_dvb = 1,
1770 .dvb_gpio = kworld_a340_digital,
1771 .tuner_gpio = default_tuner_gpio,
1772 },
1773 /* 2013:024f PCTV Systems nanoStick T2 290e.
1774 * Empia EM28174, Sony CXD2820R and NXP TDA18271HD/C2 */
1775 [EM28174_BOARD_PCTV_290E] = {
1776 .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
1777 EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_100_KHZ,
1778 .name = "PCTV Systems nanoStick T2 290e",
1779 .tuner_type = TUNER_ABSENT,
1780 .tuner_gpio = pctv_290e,
1781 .has_dvb = 1,
1782 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
1783 },
1784};
1785const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
1786
1787/* table of devices that work with this driver */
1788struct usb_device_id em28xx_id_table[] = {
1789 { USB_DEVICE(0xeb1a, 0x2750),
1790 .driver_info = EM2750_BOARD_UNKNOWN },
1791 { USB_DEVICE(0xeb1a, 0x2751),
1792 .driver_info = EM2750_BOARD_UNKNOWN },
1793 { USB_DEVICE(0xeb1a, 0x2800),
1794 .driver_info = EM2800_BOARD_UNKNOWN },
1795 { USB_DEVICE(0xeb1a, 0x2710),
1796 .driver_info = EM2820_BOARD_UNKNOWN },
1797 { USB_DEVICE(0xeb1a, 0x2820),
1798 .driver_info = EM2820_BOARD_UNKNOWN },
1799 { USB_DEVICE(0xeb1a, 0x2821),
1800 .driver_info = EM2820_BOARD_UNKNOWN },
1801 { USB_DEVICE(0xeb1a, 0x2860),
1802 .driver_info = EM2820_BOARD_UNKNOWN },
1803 { USB_DEVICE(0xeb1a, 0x2861),
1804 .driver_info = EM2820_BOARD_UNKNOWN },
1805 { USB_DEVICE(0xeb1a, 0x2862),
1806 .driver_info = EM2820_BOARD_UNKNOWN },
1807 { USB_DEVICE(0xeb1a, 0x2863),
1808 .driver_info = EM2820_BOARD_UNKNOWN },
1809 { USB_DEVICE(0xeb1a, 0x2870),
1810 .driver_info = EM2820_BOARD_UNKNOWN },
1811 { USB_DEVICE(0xeb1a, 0x2881),
1812 .driver_info = EM2820_BOARD_UNKNOWN },
1813 { USB_DEVICE(0xeb1a, 0x2883),
1814 .driver_info = EM2820_BOARD_UNKNOWN },
1815 { USB_DEVICE(0xeb1a, 0x2868),
1816 .driver_info = EM2820_BOARD_UNKNOWN },
1817 { USB_DEVICE(0xeb1a, 0x2875),
1818 .driver_info = EM2820_BOARD_UNKNOWN },
1819 { USB_DEVICE(0xeb1a, 0xe300),
1820 .driver_info = EM2861_BOARD_KWORLD_PVRTV_300U },
1821 { USB_DEVICE(0xeb1a, 0xe303),
1822 .driver_info = EM2860_BOARD_KAIOMY_TVNPC_U2 },
1823 { USB_DEVICE(0xeb1a, 0xe305),
1824 .driver_info = EM2880_BOARD_KWORLD_DVB_305U },
1825 { USB_DEVICE(0xeb1a, 0xe310),
1826 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD },
1827 { USB_DEVICE(0xeb1a, 0xa313),
1828 .driver_info = EM2882_BOARD_KWORLD_ATSC_315U },
1829 { USB_DEVICE(0xeb1a, 0xa316),
1830 .driver_info = EM2883_BOARD_KWORLD_HYBRID_330U },
1831 { USB_DEVICE(0xeb1a, 0xe320),
1832 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II },
1833 { USB_DEVICE(0xeb1a, 0xe323),
1834 .driver_info = EM2882_BOARD_KWORLD_VS_DVBT },
1835 { USB_DEVICE(0xeb1a, 0xe350),
1836 .driver_info = EM2870_BOARD_KWORLD_350U },
1837 { USB_DEVICE(0xeb1a, 0xe355),
1838 .driver_info = EM2870_BOARD_KWORLD_355U },
1839 { USB_DEVICE(0xeb1a, 0x2801),
1840 .driver_info = EM2800_BOARD_GRABBEEX_USB2800 },
1841 { USB_DEVICE(0xeb1a, 0xe357),
1842 .driver_info = EM2870_BOARD_KWORLD_355U },
1843 { USB_DEVICE(0x1b80, 0xe302),
1844 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kaiser Baas Video to DVD maker */
1845 { USB_DEVICE(0x1b80, 0xe304),
1846 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kworld DVD Maker 2 */
1847 { USB_DEVICE(0x0ccd, 0x0036),
1848 .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 },
1849 { USB_DEVICE(0x0ccd, 0x004c),
1850 .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS_FR },
1851 { USB_DEVICE(0x0ccd, 0x004f),
1852 .driver_info = EM2860_BOARD_TERRATEC_HYBRID_XS },
1853 { USB_DEVICE(0x0ccd, 0x005e),
1854 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
1855 { USB_DEVICE(0x0ccd, 0x0042),
1856 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
1857 { USB_DEVICE(0x0ccd, 0x0043),
1858 .driver_info = EM2870_BOARD_TERRATEC_XS },
1859 { USB_DEVICE(0x0ccd, 0x0047),
1860 .driver_info = EM2880_BOARD_TERRATEC_PRODIGY_XS },
1861 { USB_DEVICE(0x0ccd, 0x0084),
1862 .driver_info = EM2860_BOARD_TERRATEC_AV350 },
1863 { USB_DEVICE(0x0ccd, 0x0096),
1864 .driver_info = EM2860_BOARD_TERRATEC_GRABBY },
1865 { USB_DEVICE(0x0fd9, 0x0033),
1866 .driver_info = EM2860_BOARD_ELGATO_VIDEO_CAPTURE},
1867 { USB_DEVICE(0x185b, 0x2870),
1868 .driver_info = EM2870_BOARD_COMPRO_VIDEOMATE },
1869 { USB_DEVICE(0x185b, 0x2041),
1870 .driver_info = EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU },
1871 { USB_DEVICE(0x2040, 0x4200),
1872 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
1873 { USB_DEVICE(0x2040, 0x4201),
1874 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
1875 { USB_DEVICE(0x2040, 0x6500),
1876 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 },
1877 { USB_DEVICE(0x2040, 0x6502),
1878 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 },
1879 { USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */
1880 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
1881 { USB_DEVICE(0x2040, 0x6517), /* HP HVR-950 */
1882 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
1883 { USB_DEVICE(0x2040, 0x651b), /* RP HVR-950 */
1884 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
1885 { USB_DEVICE(0x2040, 0x651f),
1886 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 },
1887 { USB_DEVICE(0x0438, 0xb002),
1888 .driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 },
1889 { USB_DEVICE(0x2001, 0xf112),
1890 .driver_info = EM2820_BOARD_DLINK_USB_TV },
1891 { USB_DEVICE(0x2304, 0x0207),
1892 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
1893 { USB_DEVICE(0x2304, 0x0208),
1894 .driver_info = EM2820_BOARD_PINNACLE_USB_2 },
1895 { USB_DEVICE(0x2304, 0x021a),
1896 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
1897 { USB_DEVICE(0x2304, 0x0226),
1898 .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO_330E },
1899 { USB_DEVICE(0x2304, 0x0227),
1900 .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO },
1901 { USB_DEVICE(0x0413, 0x6023),
1902 .driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII },
1903 { USB_DEVICE(0x093b, 0xa005),
1904 .driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U },
1905 { USB_DEVICE(0x04bb, 0x0515),
1906 .driver_info = EM2820_BOARD_IODATA_GVMVP_SZ },
1907 { USB_DEVICE(0xeb1a, 0x50a6),
1908 .driver_info = EM2860_BOARD_GADMEI_UTV330 },
1909 { USB_DEVICE(0x1b80, 0xa340),
1910 .driver_info = EM2870_BOARD_KWORLD_A340 },
1911 { USB_DEVICE(0x2013, 0x024f),
1912 .driver_info = EM28174_BOARD_PCTV_290E },
1913 { },
1914};
1915MODULE_DEVICE_TABLE(usb, em28xx_id_table);
1916
1917/*
1918 * EEPROM hash table for devices with generic USB IDs
1919 */
1920static struct em28xx_hash_table em28xx_eeprom_hash[] = {
1921 /* P/N: SA 60002070465 Tuner: TVF7533-MF */
1922 {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF},
1923 {0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF},
1924 {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028},
1925 {0x166a0441, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028},
1926 {0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028},
1927 {0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028},
1928 {0x63f653bd, EM2870_BOARD_REDDO_DVB_C_USB_BOX, TUNER_ABSENT},
1929 {0x4e913442, EM2882_BOARD_DIKOM_DK300, TUNER_XC2028},
1930};
1931
1932/* I2C devicelist hash table for devices with generic USB IDs */
1933static struct em28xx_hash_table em28xx_i2c_hash[] = {
1934 {0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC},
1935 {0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC},
1936 {0x1ba50080, EM2860_BOARD_SAA711X_REFERENCE_DESIGN, TUNER_ABSENT},
1937 {0x77800080, EM2860_BOARD_TVP5150_REFERENCE_DESIGN, TUNER_ABSENT},
1938 {0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC},
1939 {0x4ba50080, EM2861_BOARD_GADMEI_UTV330PLUS, TUNER_TNF_5335MF},
1940 {0x6b800080, EM2874_LEADERSHIP_ISDBT, TUNER_ABSENT},
1941};
1942
1943/* I2C possible address to saa7115, tvp5150, msp3400, tvaudio */
1944static unsigned short saa711x_addrs[] = {
1945 0x4a >> 1, 0x48 >> 1, /* SAA7111, SAA7111A and SAA7113 */
1946 0x42 >> 1, 0x40 >> 1, /* SAA7114, SAA7115 and SAA7118 */
1947 I2C_CLIENT_END };
1948
1949static unsigned short tvp5150_addrs[] = {
1950 0xb8 >> 1,
1951 0xba >> 1,
1952 I2C_CLIENT_END
1953};
1954
1955static unsigned short msp3400_addrs[] = {
1956 0x80 >> 1,
1957 0x88 >> 1,
1958 I2C_CLIENT_END
1959};
1960
1961int em28xx_tuner_callback(void *ptr, int component, int command, int arg)
1962{
1963 int rc = 0;
1964 struct em28xx *dev = ptr;
1965
1966 if (dev->tuner_type != TUNER_XC2028)
1967 return 0;
1968
1969 if (command != XC2028_TUNER_RESET)
1970 return 0;
1971
1972 rc = em28xx_gpio_set(dev, dev->board.tuner_gpio);
1973
1974 return rc;
1975}
1976EXPORT_SYMBOL_GPL(em28xx_tuner_callback);
1977
1978static inline void em28xx_set_model(struct em28xx *dev)
1979{
1980 memcpy(&dev->board, &em28xx_boards[dev->model], sizeof(dev->board));
1981
1982 /* Those are the default values for the majority of boards
1983 Use those values if not specified otherwise at boards entry
1984 */
1985 if (!dev->board.xclk)
1986 dev->board.xclk = EM28XX_XCLK_IR_RC5_MODE |
1987 EM28XX_XCLK_FREQUENCY_12MHZ;
1988
1989 if (!dev->board.i2c_speed)
1990 dev->board.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1991 EM28XX_I2C_FREQ_100_KHZ;
1992}
1993
1994
1995/* FIXME: Should be replaced by a proper mt9m111 driver */
1996static int em28xx_initialize_mt9m111(struct em28xx *dev)
1997{
1998 int i;
1999 unsigned char regs[][3] = {
2000 { 0x0d, 0x00, 0x01, }, /* reset and use defaults */
2001 { 0x0d, 0x00, 0x00, },
2002 { 0x0a, 0x00, 0x21, },
2003 { 0x21, 0x04, 0x00, }, /* full readout speed, no row/col skipping */
2004 };
2005
2006 for (i = 0; i < ARRAY_SIZE(regs); i++)
2007 i2c_master_send(&dev->i2c_client, &regs[i][0], 3);
2008
2009 return 0;
2010}
2011
2012
2013/* FIXME: Should be replaced by a proper mt9m001 driver */
2014static int em28xx_initialize_mt9m001(struct em28xx *dev)
2015{
2016 int i;
2017 unsigned char regs[][3] = {
2018 { 0x0d, 0x00, 0x01, },
2019 { 0x0d, 0x00, 0x00, },
2020 { 0x04, 0x05, 0x00, }, /* hres = 1280 */
2021 { 0x03, 0x04, 0x00, }, /* vres = 1024 */
2022 { 0x20, 0x11, 0x00, },
2023 { 0x06, 0x00, 0x10, },
2024 { 0x2b, 0x00, 0x24, },
2025 { 0x2e, 0x00, 0x24, },
2026 { 0x35, 0x00, 0x24, },
2027 { 0x2d, 0x00, 0x20, },
2028 { 0x2c, 0x00, 0x20, },
2029 { 0x09, 0x0a, 0xd4, },
2030 { 0x35, 0x00, 0x57, },
2031 };
2032
2033 for (i = 0; i < ARRAY_SIZE(regs); i++)
2034 i2c_master_send(&dev->i2c_client, &regs[i][0], 3);
2035
2036 return 0;
2037}
2038
2039/* HINT method: webcam I2C chips
2040 *
2041 * This method works for webcams with Micron sensors
2042 */
2043static int em28xx_hint_sensor(struct em28xx *dev)
2044{
2045 int rc;
2046 char *sensor_name;
2047 unsigned char cmd;
2048 __be16 version_be;
2049 u16 version;
2050
2051 /* Micron sensor detection */
2052 dev->i2c_client.addr = 0xba >> 1;
2053 cmd = 0;
2054 i2c_master_send(&dev->i2c_client, &cmd, 1);
2055 rc = i2c_master_recv(&dev->i2c_client, (char *)&version_be, 2);
2056 if (rc != 2)
2057 return -EINVAL;
2058
2059 version = be16_to_cpu(version_be);
2060 switch (version) {
2061 case 0x8232: /* mt9v011 640x480 1.3 Mpix sensor */
2062 case 0x8243: /* mt9v011 rev B 640x480 1.3 Mpix sensor */
2063 dev->model = EM2820_BOARD_SILVERCREST_WEBCAM;
2064 em28xx_set_model(dev);
2065
2066 sensor_name = "mt9v011";
2067 dev->em28xx_sensor = EM28XX_MT9V011;
2068 dev->sensor_xres = 640;
2069 dev->sensor_yres = 480;
2070 /*
2071 * FIXME: mt9v011 uses I2S speed as xtal clk - at least with
2072 * the Silvercrest cam I have here for testing - for higher
2073 * resolutions, a high clock cause horizontal artifacts, so we
2074 * need to use a lower xclk frequency.
2075 * Yet, it would be possible to adjust xclk depending on the
2076 * desired resolution, since this affects directly the
2077 * frame rate.
2078 */
2079 dev->board.xclk = EM28XX_XCLK_FREQUENCY_4_3MHZ;
2080 dev->sensor_xtal = 4300000;
2081
2082 /* probably means GRGB 16 bit bayer */
2083 dev->vinmode = 0x0d;
2084 dev->vinctl = 0x00;
2085
2086 break;
2087
2088 case 0x143a: /* MT9M111 as found in the ECS G200 */
2089 dev->model = EM2750_BOARD_UNKNOWN;
2090 em28xx_set_model(dev);
2091
2092 sensor_name = "mt9m111";
2093 dev->board.xclk = EM28XX_XCLK_FREQUENCY_48MHZ;
2094 dev->em28xx_sensor = EM28XX_MT9M111;
2095 em28xx_initialize_mt9m111(dev);
2096 dev->sensor_xres = 640;
2097 dev->sensor_yres = 512;
2098
2099 dev->vinmode = 0x0a;
2100 dev->vinctl = 0x00;
2101
2102 break;
2103
2104 case 0x8431:
2105 dev->model = EM2750_BOARD_UNKNOWN;
2106 em28xx_set_model(dev);
2107
2108 sensor_name = "mt9m001";
2109 dev->em28xx_sensor = EM28XX_MT9M001;
2110 em28xx_initialize_mt9m001(dev);
2111 dev->sensor_xres = 1280;
2112 dev->sensor_yres = 1024;
2113
2114 /* probably means BGGR 16 bit bayer */
2115 dev->vinmode = 0x0c;
2116 dev->vinctl = 0x00;
2117
2118 break;
2119 default:
2120 printk("Unknown Micron Sensor 0x%04x\n", version);
2121 return -EINVAL;
2122 }
2123
2124 /* Setup webcam defaults */
2125 em28xx_pre_card_setup(dev);
2126
2127 em28xx_errdev("Sensor is %s, using model %s entry.\n",
2128 sensor_name, em28xx_boards[dev->model].name);
2129
2130 return 0;
2131}
2132
2133/* Since em28xx_pre_card_setup() requires a proper dev->model,
2134 * this won't work for boards with generic PCI IDs
2135 */
2136void em28xx_pre_card_setup(struct em28xx *dev)
2137{
2138 /* Set the initial XCLK and I2C clock values based on the board
2139 definition */
2140 em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk & 0x7f);
2141 em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed);
2142 msleep(50);
2143
2144 /* request some modules */
2145 switch (dev->model) {
2146 case EM2861_BOARD_PLEXTOR_PX_TV100U:
2147 /* Sets the msp34xx I2S speed */
2148 dev->i2s_speed = 2048000;
2149 break;
2150 case EM2861_BOARD_KWORLD_PVRTV_300U:
2151 case EM2880_BOARD_KWORLD_DVB_305U:
2152 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x6d);
2153 msleep(10);
2154 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x7d);
2155 msleep(10);
2156 break;
2157 case EM2870_BOARD_COMPRO_VIDEOMATE:
2158 /* TODO: someone can do some cleanup here...
2159 not everything's needed */
2160 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
2161 msleep(10);
2162 em28xx_write_reg(dev, EM2880_R04_GPO, 0x01);
2163 msleep(10);
2164 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
2165 mdelay(70);
2166 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc);
2167 mdelay(70);
2168 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xdc);
2169 mdelay(70);
2170 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc);
2171 mdelay(70);
2172 break;
2173 case EM2870_BOARD_TERRATEC_XS_MT2060:
2174 /* this device needs some gpio writes to get the DVB-T
2175 demod work */
2176 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2177 mdelay(70);
2178 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde);
2179 mdelay(70);
2180 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2181 mdelay(70);
2182 break;
2183 case EM2870_BOARD_PINNACLE_PCTV_DVB:
2184 /* this device needs some gpio writes to get the
2185 DVB-T demod work */
2186 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2187 mdelay(70);
2188 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde);
2189 mdelay(70);
2190 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2191 mdelay(70);
2192 break;
2193 case EM2820_BOARD_GADMEI_UTV310:
2194 case EM2820_BOARD_MSI_VOX_USB_2:
2195 /* enables audio for that devices */
2196 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
2197 break;
2198
2199 case EM2882_BOARD_KWORLD_ATSC_315U:
2200 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
2201 msleep(10);
2202 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2203 msleep(10);
2204 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
2205 msleep(10);
2206 em28xx_write_reg(dev, EM2880_R04_GPO, 0x08);
2207 msleep(10);
2208 break;
2209
2210 case EM2860_BOARD_KAIOMY_TVNPC_U2:
2211 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1);
2212 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
2213 em28xx_write_regs(dev, 0x0d, "\x42", 1);
2214 em28xx_write_regs(dev, 0x08, "\xfd", 1);
2215 msleep(10);
2216 em28xx_write_regs(dev, 0x08, "\xff", 1);
2217 msleep(10);
2218 em28xx_write_regs(dev, 0x08, "\x7f", 1);
2219 msleep(10);
2220 em28xx_write_regs(dev, 0x08, "\x6b", 1);
2221
2222 break;
2223 case EM2860_BOARD_EASYCAP:
2224 em28xx_write_regs(dev, 0x08, "\xf8", 1);
2225 break;
2226
2227 case EM2820_BOARD_IODATA_GVMVP_SZ:
2228 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
2229 msleep(70);
2230 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7);
2231 msleep(10);
2232 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2233 msleep(70);
2234 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
2235 msleep(70);
2236 break;
2237 }
2238
2239 em28xx_gpio_set(dev, dev->board.tuner_gpio);
2240 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
2241
2242 /* Unlock device */
2243 em28xx_set_mode(dev, EM28XX_SUSPEND);
2244}
2245
2246static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
2247{
2248 memset(ctl, 0, sizeof(*ctl));
2249
2250 ctl->fname = XC2028_DEFAULT_FIRMWARE;
2251 ctl->max_len = 64;
2252 ctl->mts = em28xx_boards[dev->model].mts_firmware;
2253
2254 switch (dev->model) {
2255 case EM2880_BOARD_EMPIRE_DUAL_TV:
2256 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
2257 case EM2882_BOARD_TERRATEC_HYBRID_XS:
2258 ctl->demod = XC3028_FE_ZARLINK456;
2259 break;
2260 case EM2880_BOARD_TERRATEC_HYBRID_XS:
2261 case EM2880_BOARD_TERRATEC_HYBRID_XS_FR:
2262 case EM2881_BOARD_PINNACLE_HYBRID_PRO:
2263 ctl->demod = XC3028_FE_ZARLINK456;
2264 break;
2265 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
2266 case EM2882_BOARD_PINNACLE_HYBRID_PRO_330E:
2267 ctl->demod = XC3028_FE_DEFAULT;
2268 break;
2269 case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
2270 ctl->demod = XC3028_FE_DEFAULT;
2271 ctl->fname = XC3028L_DEFAULT_FIRMWARE;
2272 break;
2273 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
2274 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
2275 case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
2276 /* FIXME: Better to specify the needed IF */
2277 ctl->demod = XC3028_FE_DEFAULT;
2278 break;
2279 case EM2883_BOARD_KWORLD_HYBRID_330U:
2280 case EM2882_BOARD_DIKOM_DK300:
2281 case EM2882_BOARD_KWORLD_VS_DVBT:
2282 ctl->demod = XC3028_FE_CHINA;
2283 ctl->fname = XC2028_DEFAULT_FIRMWARE;
2284 break;
2285 case EM2882_BOARD_EVGA_INDTUBE:
2286 ctl->demod = XC3028_FE_CHINA;
2287 ctl->fname = XC3028L_DEFAULT_FIRMWARE;
2288 break;
2289 default:
2290 ctl->demod = XC3028_FE_OREN538;
2291 }
2292}
2293
2294static void em28xx_tuner_setup(struct em28xx *dev)
2295{
2296 struct tuner_setup tun_setup;
2297 struct v4l2_frequency f;
2298
2299 if (dev->tuner_type == TUNER_ABSENT)
2300 return;
2301
2302 memset(&tun_setup, 0, sizeof(tun_setup));
2303
2304 tun_setup.mode_mask = T_ANALOG_TV | T_RADIO;
2305 tun_setup.tuner_callback = em28xx_tuner_callback;
2306
2307 if (dev->board.radio.type) {
2308 tun_setup.type = dev->board.radio.type;
2309 tun_setup.addr = dev->board.radio_addr;
2310
2311 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
2312 }
2313
2314 if ((dev->tuner_type != TUNER_ABSENT) && (dev->tuner_type)) {
2315 tun_setup.type = dev->tuner_type;
2316 tun_setup.addr = dev->tuner_addr;
2317
2318 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
2319 }
2320
2321 if (dev->tda9887_conf) {
2322 struct v4l2_priv_tun_config tda9887_cfg;
2323
2324 tda9887_cfg.tuner = TUNER_TDA9887;
2325 tda9887_cfg.priv = &dev->tda9887_conf;
2326
2327 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &tda9887_cfg);
2328 }
2329
2330 if (dev->tuner_type == TUNER_XC2028) {
2331 struct v4l2_priv_tun_config xc2028_cfg;
2332 struct xc2028_ctrl ctl;
2333
2334 memset(&xc2028_cfg, 0, sizeof(xc2028_cfg));
2335 memset(&ctl, 0, sizeof(ctl));
2336
2337 em28xx_setup_xc3028(dev, &ctl);
2338
2339 xc2028_cfg.tuner = TUNER_XC2028;
2340 xc2028_cfg.priv = &ctl;
2341
2342 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &xc2028_cfg);
2343 }
2344
2345 /* configure tuner */
2346 f.tuner = 0;
2347 f.type = V4L2_TUNER_ANALOG_TV;
2348 f.frequency = 9076; /* just a magic number */
2349 dev->ctl_freq = f.frequency;
2350 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f);
2351}
2352
2353static int em28xx_hint_board(struct em28xx *dev)
2354{
2355 int i;
2356
2357 /* HINT method: EEPROM
2358 *
2359 * This method works only for boards with eeprom.
2360 * Uses a hash of all eeprom bytes. The hash should be
2361 * unique for a vendor/tuner pair.
2362 * There are a high chance that tuners for different
2363 * video standards produce different hashes.
2364 */
2365 for (i = 0; i < ARRAY_SIZE(em28xx_eeprom_hash); i++) {
2366 if (dev->hash == em28xx_eeprom_hash[i].hash) {
2367 dev->model = em28xx_eeprom_hash[i].model;
2368 dev->tuner_type = em28xx_eeprom_hash[i].tuner;
2369
2370 em28xx_errdev("Your board has no unique USB ID.\n");
2371 em28xx_errdev("A hint were successfully done, "
2372 "based on eeprom hash.\n");
2373 em28xx_errdev("This method is not 100%% failproof.\n");
2374 em28xx_errdev("If the board were missdetected, "
2375 "please email this log to:\n");
2376 em28xx_errdev("\tV4L Mailing List "
2377 " <linux-media@vger.kernel.org>\n");
2378 em28xx_errdev("Board detected as %s\n",
2379 em28xx_boards[dev->model].name);
2380
2381 return 0;
2382 }
2383 }
2384
2385 /* HINT method: I2C attached devices
2386 *
2387 * This method works for all boards.
2388 * Uses a hash of i2c scanned devices.
2389 * Devices with the same i2c attached chips will
2390 * be considered equal.
2391 * This method is less precise than the eeprom one.
2392 */
2393
2394 /* user did not request i2c scanning => do it now */
2395 if (!dev->i2c_hash)
2396 em28xx_do_i2c_scan(dev);
2397
2398 for (i = 0; i < ARRAY_SIZE(em28xx_i2c_hash); i++) {
2399 if (dev->i2c_hash == em28xx_i2c_hash[i].hash) {
2400 dev->model = em28xx_i2c_hash[i].model;
2401 dev->tuner_type = em28xx_i2c_hash[i].tuner;
2402 em28xx_errdev("Your board has no unique USB ID.\n");
2403 em28xx_errdev("A hint were successfully done, "
2404 "based on i2c devicelist hash.\n");
2405 em28xx_errdev("This method is not 100%% failproof.\n");
2406 em28xx_errdev("If the board were missdetected, "
2407 "please email this log to:\n");
2408 em28xx_errdev("\tV4L Mailing List "
2409 " <linux-media@vger.kernel.org>\n");
2410 em28xx_errdev("Board detected as %s\n",
2411 em28xx_boards[dev->model].name);
2412
2413 return 0;
2414 }
2415 }
2416
2417 em28xx_errdev("Your board has no unique USB ID and thus need a "
2418 "hint to be detected.\n");
2419 em28xx_errdev("You may try to use card=<n> insmod option to "
2420 "workaround that.\n");
2421 em28xx_errdev("Please send an email with this log to:\n");
2422 em28xx_errdev("\tV4L Mailing List <linux-media@vger.kernel.org>\n");
2423 em28xx_errdev("Board eeprom hash is 0x%08lx\n", dev->hash);
2424 em28xx_errdev("Board i2c devicelist hash is 0x%08lx\n", dev->i2c_hash);
2425
2426 em28xx_errdev("Here is a list of valid choices for the card=<n>"
2427 " insmod option:\n");
2428 for (i = 0; i < em28xx_bcount; i++) {
2429 em28xx_errdev(" card=%d -> %s\n",
2430 i, em28xx_boards[i].name);
2431 }
2432 return -1;
2433}
2434
2435/* ----------------------------------------------------------------------- */
2436void em28xx_register_i2c_ir(struct em28xx *dev)
2437{
2438 /* Leadtek winfast tv USBII deluxe can find a non working IR-device */
2439 /* at address 0x18, so if that address is needed for another board in */
2440 /* the future, please put it after 0x1f. */
2441 struct i2c_board_info info;
2442 const unsigned short addr_list[] = {
2443 0x1f, 0x30, 0x47, I2C_CLIENT_END
2444 };
2445
2446 if (disable_ir)
2447 return;
2448
2449 memset(&info, 0, sizeof(struct i2c_board_info));
2450 memset(&dev->init_data, 0, sizeof(dev->init_data));
2451 strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
2452
2453 /* detect & configure */
2454 switch (dev->model) {
2455 case EM2800_BOARD_TERRATEC_CINERGY_200:
2456 case EM2820_BOARD_TERRATEC_CINERGY_250:
2457 dev->init_data.ir_codes = RC_MAP_EM_TERRATEC;
2458 dev->init_data.get_key = em28xx_get_key_terratec;
2459 dev->init_data.name = "i2c IR (EM28XX Terratec)";
2460 break;
2461 case EM2820_BOARD_PINNACLE_USB_2:
2462 dev->init_data.ir_codes = RC_MAP_PINNACLE_GREY;
2463 dev->init_data.get_key = em28xx_get_key_pinnacle_usb_grey;
2464 dev->init_data.name = "i2c IR (EM28XX Pinnacle PCTV)";
2465 break;
2466 case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
2467 dev->init_data.ir_codes = RC_MAP_HAUPPAUGE;
2468 dev->init_data.get_key = em28xx_get_key_em_haup;
2469 dev->init_data.name = "i2c IR (EM2840 Hauppauge)";
2470 break;
2471 case EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE:
2472 dev->init_data.ir_codes = RC_MAP_WINFAST_USBII_DELUXE;
2473 dev->init_data.get_key = em28xx_get_key_winfast_usbii_deluxe;
2474 dev->init_data.name = "i2c IR (EM2820 Winfast TV USBII Deluxe)";
2475 break;
2476 }
2477
2478 if (dev->init_data.name)
2479 info.platform_data = &dev->init_data;
2480 i2c_new_probed_device(&dev->i2c_adap, &info, addr_list, NULL);
2481}
2482
2483void em28xx_card_setup(struct em28xx *dev)
2484{
2485 /*
2486 * If the device can be a webcam, seek for a sensor.
2487 * If sensor is not found, then it isn't a webcam.
2488 */
2489 if (dev->board.is_webcam) {
2490 if (em28xx_hint_sensor(dev) < 0)
2491 dev->board.is_webcam = 0;
2492 else
2493 dev->progressive = 1;
2494 }
2495
2496 if (!dev->board.is_webcam) {
2497 switch (dev->model) {
2498 case EM2820_BOARD_UNKNOWN:
2499 case EM2800_BOARD_UNKNOWN:
2500 /*
2501 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
2502 *
2503 * This occurs because they share identical USB vendor and
2504 * product IDs.
2505 *
2506 * What we do here is look up the EEPROM hash of the K-WORLD
2507 * and if it is found then we decide that we do not have
2508 * a DIGIVOX and reset the device to the K-WORLD instead.
2509 *
2510 * This solution is only valid if they do not share eeprom
2511 * hash identities which has not been determined as yet.
2512 */
2513 if (em28xx_hint_board(dev) < 0)
2514 em28xx_errdev("Board not discovered\n");
2515 else {
2516 em28xx_set_model(dev);
2517 em28xx_pre_card_setup(dev);
2518 }
2519 break;
2520 default:
2521 em28xx_set_model(dev);
2522 }
2523 }
2524
2525 em28xx_info("Identified as %s (card=%d)\n",
2526 dev->board.name, dev->model);
2527
2528 dev->tuner_type = em28xx_boards[dev->model].tuner_type;
2529 if (em28xx_boards[dev->model].tuner_addr)
2530 dev->tuner_addr = em28xx_boards[dev->model].tuner_addr;
2531
2532 if (em28xx_boards[dev->model].tda9887_conf)
2533 dev->tda9887_conf = em28xx_boards[dev->model].tda9887_conf;
2534
2535 /* request some modules */
2536 switch (dev->model) {
2537 case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
2538 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
2539 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
2540 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
2541 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
2542 {
2543 struct tveeprom tv;
2544#if defined(CONFIG_MODULES) && defined(MODULE)
2545 request_module("tveeprom");
2546#endif
2547 /* Call first TVeeprom */
2548
2549 dev->i2c_client.addr = 0xa0 >> 1;
2550 tveeprom_hauppauge_analog(&dev->i2c_client, &tv, dev->eedata);
2551
2552 dev->tuner_type = tv.tuner_type;
2553
2554 if (tv.audio_processor == V4L2_IDENT_MSPX4XX) {
2555 dev->i2s_speed = 2048000;
2556 dev->board.has_msp34xx = 1;
2557 }
2558 break;
2559 }
2560 case EM2882_BOARD_KWORLD_ATSC_315U:
2561 em28xx_write_reg(dev, 0x0d, 0x42);
2562 msleep(10);
2563 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
2564 msleep(10);
2565 break;
2566 case EM2820_BOARD_KWORLD_PVRTV2800RF:
2567 /* GPIO enables sound on KWORLD PVR TV 2800RF */
2568 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf9);
2569 break;
2570 case EM2820_BOARD_UNKNOWN:
2571 case EM2800_BOARD_UNKNOWN:
2572 /*
2573 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
2574 *
2575 * This occurs because they share identical USB vendor and
2576 * product IDs.
2577 *
2578 * What we do here is look up the EEPROM hash of the K-WORLD
2579 * and if it is found then we decide that we do not have
2580 * a DIGIVOX and reset the device to the K-WORLD instead.
2581 *
2582 * This solution is only valid if they do not share eeprom
2583 * hash identities which has not been determined as yet.
2584 */
2585 case EM2880_BOARD_MSI_DIGIVOX_AD:
2586 if (!em28xx_hint_board(dev))
2587 em28xx_set_model(dev);
2588
2589 /* In cases where we had to use a board hint, the call to
2590 em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
2591 so make the call now so the analog GPIOs are set properly
2592 before probing the i2c bus. */
2593 em28xx_gpio_set(dev, dev->board.tuner_gpio);
2594 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
2595 break;
2596
2597/*
2598 * The Dikom DK300 is detected as an Kworld VS-DVB-T 323UR.
2599 *
2600 * This occurs because they share identical USB vendor and
2601 * product IDs.
2602 *
2603 * What we do here is look up the EEPROM hash of the Dikom
2604 * and if it is found then we decide that we do not have
2605 * a Kworld and reset the device to the Dikom instead.
2606 *
2607 * This solution is only valid if they do not share eeprom
2608 * hash identities which has not been determined as yet.
2609 */
2610 case EM2882_BOARD_KWORLD_VS_DVBT:
2611 if (!em28xx_hint_board(dev))
2612 em28xx_set_model(dev);
2613
2614 /* In cases where we had to use a board hint, the call to
2615 em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
2616 so make the call now so the analog GPIOs are set properly
2617 before probing the i2c bus. */
2618 em28xx_gpio_set(dev, dev->board.tuner_gpio);
2619 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
2620 break;
2621 }
2622
2623#if defined(CONFIG_MODULES) && defined(MODULE)
2624 if (dev->board.has_ir_i2c && !disable_ir)
2625 request_module("ir-kbd-i2c");
2626#endif
2627 if (dev->board.has_snapshot_button)
2628 em28xx_register_snapshot_button(dev);
2629
2630 if (dev->board.valid == EM28XX_BOARD_NOT_VALIDATED) {
2631 em28xx_errdev("\n\n");
2632 em28xx_errdev("The support for this board weren't "
2633 "valid yet.\n");
2634 em28xx_errdev("Please send a report of having this working\n");
2635 em28xx_errdev("not to V4L mailing list (and/or to other "
2636 "addresses)\n\n");
2637 }
2638
2639 /* Allow override tuner type by a module parameter */
2640 if (tuner >= 0)
2641 dev->tuner_type = tuner;
2642
2643 /* request some modules */
2644 if (dev->board.has_msp34xx)
2645 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2646 "msp3400", 0, msp3400_addrs);
2647
2648 if (dev->board.decoder == EM28XX_SAA711X)
2649 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2650 "saa7115_auto", 0, saa711x_addrs);
2651
2652 if (dev->board.decoder == EM28XX_TVP5150)
2653 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2654 "tvp5150", 0, tvp5150_addrs);
2655
2656 if (dev->em28xx_sensor == EM28XX_MT9V011) {
2657 struct mt9v011_platform_data pdata;
2658 struct i2c_board_info mt9v011_info = {
2659 .type = "mt9v011",
2660 .addr = 0xba >> 1,
2661 .platform_data = &pdata,
2662 };
2663 struct v4l2_subdev *sd;
2664
2665 pdata.xtal = dev->sensor_xtal;
2666 sd = v4l2_i2c_new_subdev_board(&dev->v4l2_dev, &dev->i2c_adap,
2667 &mt9v011_info, NULL);
2668 }
2669
2670
2671 if (dev->board.adecoder == EM28XX_TVAUDIO)
2672 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2673 "tvaudio", dev->board.tvaudio_addr, NULL);
2674
2675 if (dev->board.tuner_type != TUNER_ABSENT) {
2676 int has_demod = (dev->tda9887_conf & TDA9887_PRESENT);
2677
2678 if (dev->board.radio.type)
2679 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2680 "tuner", dev->board.radio_addr, NULL);
2681
2682 if (has_demod)
2683 v4l2_i2c_new_subdev(&dev->v4l2_dev,
2684 &dev->i2c_adap, "tuner",
2685 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
2686 if (dev->tuner_addr == 0) {
2687 enum v4l2_i2c_tuner_type type =
2688 has_demod ? ADDRS_TV_WITH_DEMOD : ADDRS_TV;
2689 struct v4l2_subdev *sd;
2690
2691 sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
2692 &dev->i2c_adap, "tuner",
2693 0, v4l2_i2c_tuner_addrs(type));
2694
2695 if (sd)
2696 dev->tuner_addr = v4l2_i2c_subdev_addr(sd);
2697 } else {
2698 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2699 "tuner", dev->tuner_addr, NULL);
2700 }
2701 }
2702
2703 em28xx_tuner_setup(dev);
2704
2705 if(!disable_ir)
2706 em28xx_ir_init(dev);
2707}
2708
2709
2710#if defined(CONFIG_MODULES) && defined(MODULE)
2711static void request_module_async(struct work_struct *work)
2712{
2713 struct em28xx *dev = container_of(work,
2714 struct em28xx, request_module_wk);
2715
2716 if (dev->has_audio_class)
2717 request_module("snd-usb-audio");
2718 else if (dev->has_alsa_audio)
2719 request_module("em28xx-alsa");
2720
2721 if (dev->board.has_dvb)
2722 request_module("em28xx-dvb");
2723}
2724
2725static void request_modules(struct em28xx *dev)
2726{
2727 INIT_WORK(&dev->request_module_wk, request_module_async);
2728 schedule_work(&dev->request_module_wk);
2729}
2730
2731static void flush_request_modules(struct em28xx *dev)
2732{
2733 flush_work_sync(&dev->request_module_wk);
2734}
2735#else
2736#define request_modules(dev)
2737#define flush_request_modules(dev)
2738#endif /* CONFIG_MODULES */
2739
2740/*
2741 * em28xx_realease_resources()
2742 * unregisters the v4l2,i2c and usb devices
2743 * called when the device gets disconected or at module unload
2744*/
2745void em28xx_release_resources(struct em28xx *dev)
2746{
2747 if (dev->sbutton_input_dev)
2748 em28xx_deregister_snapshot_button(dev);
2749
2750 if (dev->ir)
2751 em28xx_ir_fini(dev);
2752
2753 /*FIXME: I2C IR should be disconnected */
2754
2755 em28xx_release_analog_resources(dev);
2756
2757 em28xx_remove_from_devlist(dev);
2758
2759 em28xx_i2c_unregister(dev);
2760
2761 v4l2_device_unregister(&dev->v4l2_dev);
2762
2763 usb_put_dev(dev->udev);
2764
2765 /* Mark device as unused */
2766 em28xx_devused &= ~(1 << dev->devno);
2767};
2768
2769/*
2770 * em28xx_init_dev()
2771 * allocates and inits the device structs, registers i2c bus and v4l device
2772 */
2773static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
2774 struct usb_interface *interface,
2775 int minor)
2776{
2777 struct em28xx *dev = *devhandle;
2778 int retval;
2779 int errCode;
2780
2781 dev->udev = udev;
2782 mutex_init(&dev->ctrl_urb_lock);
2783 spin_lock_init(&dev->slock);
2784 init_waitqueue_head(&dev->open);
2785 init_waitqueue_head(&dev->wait_frame);
2786 init_waitqueue_head(&dev->wait_stream);
2787
2788 dev->em28xx_write_regs = em28xx_write_regs;
2789 dev->em28xx_read_reg = em28xx_read_reg;
2790 dev->em28xx_read_reg_req_len = em28xx_read_reg_req_len;
2791 dev->em28xx_write_regs_req = em28xx_write_regs_req;
2792 dev->em28xx_read_reg_req = em28xx_read_reg_req;
2793 dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800;
2794
2795 em28xx_set_model(dev);
2796
2797 /* Set the default GPO/GPIO for legacy devices */
2798 dev->reg_gpo_num = EM2880_R04_GPO;
2799 dev->reg_gpio_num = EM28XX_R08_GPIO;
2800
2801 dev->wait_after_write = 5;
2802
2803 /* Based on the Chip ID, set the device configuration */
2804 retval = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
2805 if (retval > 0) {
2806 dev->chip_id = retval;
2807
2808 switch (dev->chip_id) {
2809 case CHIP_ID_EM2800:
2810 em28xx_info("chip ID is em2800\n");
2811 break;
2812 case CHIP_ID_EM2710:
2813 em28xx_info("chip ID is em2710\n");
2814 break;
2815 case CHIP_ID_EM2750:
2816 em28xx_info("chip ID is em2750\n");
2817 break;
2818 case CHIP_ID_EM2820:
2819 em28xx_info("chip ID is em2820 (or em2710)\n");
2820 break;
2821 case CHIP_ID_EM2840:
2822 em28xx_info("chip ID is em2840\n");
2823 break;
2824 case CHIP_ID_EM2860:
2825 em28xx_info("chip ID is em2860\n");
2826 break;
2827 case CHIP_ID_EM2870:
2828 em28xx_info("chip ID is em2870\n");
2829 dev->wait_after_write = 0;
2830 break;
2831 case CHIP_ID_EM2874:
2832 em28xx_info("chip ID is em2874\n");
2833 dev->reg_gpio_num = EM2874_R80_GPIO;
2834 dev->wait_after_write = 0;
2835 break;
2836 case CHIP_ID_EM28174:
2837 em28xx_info("chip ID is em28174\n");
2838 dev->reg_gpio_num = EM2874_R80_GPIO;
2839 dev->wait_after_write = 0;
2840 break;
2841 case CHIP_ID_EM2883:
2842 em28xx_info("chip ID is em2882/em2883\n");
2843 dev->wait_after_write = 0;
2844 break;
2845 default:
2846 em28xx_info("em28xx chip ID = %d\n", dev->chip_id);
2847 }
2848 }
2849
2850 /* Prepopulate cached GPO register content */
2851 retval = em28xx_read_reg(dev, dev->reg_gpo_num);
2852 if (retval >= 0)
2853 dev->reg_gpo = retval;
2854
2855 em28xx_pre_card_setup(dev);
2856
2857 if (!dev->board.is_em2800) {
2858 /* Resets I2C speed */
2859 em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed);
2860 if (retval < 0) {
2861 em28xx_errdev("%s: em28xx_write_regs_req failed!"
2862 " retval [%d]\n",
2863 __func__, retval);
2864 return retval;
2865 }
2866 }
2867
2868 retval = v4l2_device_register(&interface->dev, &dev->v4l2_dev);
2869 if (retval < 0) {
2870 em28xx_errdev("Call to v4l2_device_register() failed!\n");
2871 return retval;
2872 }
2873
2874 /* register i2c bus */
2875 errCode = em28xx_i2c_register(dev);
2876 if (errCode < 0) {
2877 v4l2_device_unregister(&dev->v4l2_dev);
2878 em28xx_errdev("%s: em28xx_i2c_register - errCode [%d]!\n",
2879 __func__, errCode);
2880 return errCode;
2881 }
2882
2883 /*
2884 * Default format, used for tvp5150 or saa711x output formats
2885 */
2886 dev->vinmode = 0x10;
2887 dev->vinctl = EM28XX_VINCTRL_INTERLACED |
2888 EM28XX_VINCTRL_CCIR656_ENABLE;
2889
2890 /* Do board specific init and eeprom reading */
2891 em28xx_card_setup(dev);
2892
2893 /* Configure audio */
2894 errCode = em28xx_audio_setup(dev);
2895 if (errCode < 0) {
2896 v4l2_device_unregister(&dev->v4l2_dev);
2897 em28xx_errdev("%s: Error while setting audio - errCode [%d]!\n",
2898 __func__, errCode);
2899 }
2900
2901 /* wake i2c devices */
2902 em28xx_wake_i2c(dev);
2903
2904 /* init video dma queues */
2905 INIT_LIST_HEAD(&dev->vidq.active);
2906 INIT_LIST_HEAD(&dev->vidq.queued);
2907 INIT_LIST_HEAD(&dev->vbiq.active);
2908 INIT_LIST_HEAD(&dev->vbiq.queued);
2909
2910 if (dev->board.has_msp34xx) {
2911 /* Send a reset to other chips via gpio */
2912 errCode = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7);
2913 if (errCode < 0) {
2914 em28xx_errdev("%s: em28xx_write_regs_req - "
2915 "msp34xx(1) failed! errCode [%d]\n",
2916 __func__, errCode);
2917 return errCode;
2918 }
2919 msleep(3);
2920
2921 errCode = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
2922 if (errCode < 0) {
2923 em28xx_errdev("%s: em28xx_write_regs_req - "
2924 "msp34xx(2) failed! errCode [%d]\n",
2925 __func__, errCode);
2926 return errCode;
2927 }
2928 msleep(3);
2929 }
2930
2931 em28xx_add_into_devlist(dev);
2932
2933 retval = em28xx_register_analog_devices(dev);
2934 if (retval < 0) {
2935 em28xx_release_resources(dev);
2936 goto fail_reg_devices;
2937 }
2938
2939 em28xx_init_extension(dev);
2940
2941 /* Save some power by putting tuner to sleep */
2942 v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_power, 0);
2943
2944 return 0;
2945
2946fail_reg_devices:
2947 return retval;
2948}
2949
2950/*
2951 * em28xx_usb_probe()
2952 * checks for supported devices
2953 */
2954static int em28xx_usb_probe(struct usb_interface *interface,
2955 const struct usb_device_id *id)
2956{
2957 const struct usb_endpoint_descriptor *endpoint;
2958 struct usb_device *udev;
2959 struct usb_interface *uif;
2960 struct em28xx *dev = NULL;
2961 int retval;
2962 int i, nr, ifnum, isoc_pipe;
2963 char *speed;
2964 char descr[255] = "";
2965
2966 udev = usb_get_dev(interface_to_usbdev(interface));
2967 ifnum = interface->altsetting[0].desc.bInterfaceNumber;
2968
2969 /* Check to see next free device and mark as used */
2970 nr = find_first_zero_bit(&em28xx_devused, EM28XX_MAXBOARDS);
2971 em28xx_devused |= 1<<nr;
2972
2973 /* Don't register audio interfaces */
2974 if (interface->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
2975 em28xx_err(DRIVER_NAME " audio device (%04x:%04x): "
2976 "interface %i, class %i\n",
2977 le16_to_cpu(udev->descriptor.idVendor),
2978 le16_to_cpu(udev->descriptor.idProduct),
2979 ifnum,
2980 interface->altsetting[0].desc.bInterfaceClass);
2981
2982 em28xx_devused &= ~(1<<nr);
2983 retval = -ENODEV;
2984 goto err;
2985 }
2986
2987 endpoint = &interface->cur_altsetting->endpoint[0].desc;
2988
2989 /* check if the device has the iso in endpoint at the correct place */
2990 if (usb_endpoint_xfer_isoc(endpoint)
2991 &&
2992 (interface->altsetting[1].endpoint[0].desc.wMaxPacketSize == 940)) {
2993 /* It's a newer em2874/em2875 device */
2994 isoc_pipe = 0;
2995 } else {
2996 int check_interface = 1;
2997 isoc_pipe = 1;
2998 endpoint = &interface->cur_altsetting->endpoint[1].desc;
2999 if (!usb_endpoint_xfer_isoc(endpoint))
3000 check_interface = 0;
3001
3002 if (usb_endpoint_dir_out(endpoint))
3003 check_interface = 0;
3004
3005 if (!check_interface) {
3006 em28xx_err(DRIVER_NAME " video device (%04x:%04x): "
3007 "interface %i, class %i found.\n",
3008 le16_to_cpu(udev->descriptor.idVendor),
3009 le16_to_cpu(udev->descriptor.idProduct),
3010 ifnum,
3011 interface->altsetting[0].desc.bInterfaceClass);
3012
3013 em28xx_err(DRIVER_NAME " This is an anciliary "
3014 "interface not used by the driver\n");
3015
3016 em28xx_devused &= ~(1<<nr);
3017 retval = -ENODEV;
3018 goto err;
3019 }
3020 }
3021
3022 switch (udev->speed) {
3023 case USB_SPEED_LOW:
3024 speed = "1.5";
3025 break;
3026 case USB_SPEED_UNKNOWN:
3027 case USB_SPEED_FULL:
3028 speed = "12";
3029 break;
3030 case USB_SPEED_HIGH:
3031 speed = "480";
3032 break;
3033 default:
3034 speed = "unknown";
3035 }
3036
3037 if (udev->manufacturer)
3038 strlcpy(descr, udev->manufacturer, sizeof(descr));
3039
3040 if (udev->product) {
3041 if (*descr)
3042 strlcat(descr, " ", sizeof(descr));
3043 strlcat(descr, udev->product, sizeof(descr));
3044 }
3045 if (*descr)
3046 strlcat(descr, " ", sizeof(descr));
3047
3048 printk(DRIVER_NAME ": New device %s@ %s Mbps "
3049 "(%04x:%04x, interface %d, class %d)\n",
3050 descr,
3051 speed,
3052 le16_to_cpu(udev->descriptor.idVendor),
3053 le16_to_cpu(udev->descriptor.idProduct),
3054 ifnum,
3055 interface->altsetting->desc.bInterfaceNumber);
3056
3057 /*
3058 * Make sure we have 480 Mbps of bandwidth, otherwise things like
3059 * video stream wouldn't likely work, since 12 Mbps is generally
3060 * not enough even for most Digital TV streams.
3061 */
3062 if (udev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) {
3063 printk(DRIVER_NAME ": Device initialization failed.\n");
3064 printk(DRIVER_NAME ": Device must be connected to a high-speed"
3065 " USB 2.0 port.\n");
3066 em28xx_devused &= ~(1<<nr);
3067 retval = -ENODEV;
3068 goto err;
3069 }
3070
3071 if (nr >= EM28XX_MAXBOARDS) {
3072 printk(DRIVER_NAME ": Supports only %i em28xx boards.\n",
3073 EM28XX_MAXBOARDS);
3074 em28xx_devused &= ~(1<<nr);
3075 retval = -ENOMEM;
3076 goto err;
3077 }
3078
3079 /* allocate memory for our device state and initialize it */
3080 dev = kzalloc(sizeof(*dev), GFP_KERNEL);
3081 if (dev == NULL) {
3082 em28xx_err(DRIVER_NAME ": out of memory!\n");
3083 em28xx_devused &= ~(1<<nr);
3084 retval = -ENOMEM;
3085 goto err;
3086 }
3087
3088 snprintf(dev->name, 29, "em28xx #%d", nr);
3089 dev->devno = nr;
3090 dev->model = id->driver_info;
3091 dev->alt = -1;
3092
3093 /* Checks if audio is provided by some interface */
3094 for (i = 0; i < udev->config->desc.bNumInterfaces; i++) {
3095 uif = udev->config->interface[i];
3096 if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
3097 dev->has_audio_class = 1;
3098 break;
3099 }
3100 }
3101
3102 /* compute alternate max packet sizes */
3103 uif = udev->actconfig->interface[0];
3104
3105 dev->num_alt = uif->num_altsetting;
3106 dev->alt_max_pkt_size = kmalloc(32 * dev->num_alt, GFP_KERNEL);
3107
3108 if (dev->alt_max_pkt_size == NULL) {
3109 em28xx_errdev("out of memory!\n");
3110 em28xx_devused &= ~(1<<nr);
3111 kfree(dev);
3112 retval = -ENOMEM;
3113 goto err;
3114 }
3115
3116 for (i = 0; i < dev->num_alt ; i++) {
3117 u16 tmp = le16_to_cpu(uif->altsetting[i].endpoint[isoc_pipe].desc.wMaxPacketSize);
3118 dev->alt_max_pkt_size[i] =
3119 (tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
3120 }
3121
3122 if ((card[nr] >= 0) && (card[nr] < em28xx_bcount))
3123 dev->model = card[nr];
3124
3125 /* allocate device struct */
3126 mutex_init(&dev->lock);
3127 mutex_lock(&dev->lock);
3128 retval = em28xx_init_dev(&dev, udev, interface, nr);
3129 if (retval) {
3130 em28xx_devused &= ~(1<<dev->devno);
3131 mutex_unlock(&dev->lock);
3132 kfree(dev);
3133 goto err;
3134 }
3135
3136 /* save our data pointer in this interface device */
3137 usb_set_intfdata(interface, dev);
3138
3139 request_modules(dev);
3140
3141 /* Should be the last thing to do, to avoid newer udev's to
3142 open the device before fully initializing it
3143 */
3144 mutex_unlock(&dev->lock);
3145
3146 return 0;
3147
3148err:
3149 return retval;
3150}
3151
3152/*
3153 * em28xx_usb_disconnect()
3154 * called when the device gets diconencted
3155 * video device will be unregistered on v4l2_close in case it is still open
3156 */
3157static void em28xx_usb_disconnect(struct usb_interface *interface)
3158{
3159 struct em28xx *dev;
3160
3161 dev = usb_get_intfdata(interface);
3162 usb_set_intfdata(interface, NULL);
3163
3164 if (!dev)
3165 return;
3166
3167 em28xx_info("disconnecting %s\n", dev->vdev->name);
3168
3169 flush_request_modules(dev);
3170
3171 /* wait until all current v4l2 io is finished then deallocate
3172 resources */
3173 mutex_lock(&dev->lock);
3174
3175 wake_up_interruptible_all(&dev->open);
3176
3177 v4l2_device_disconnect(&dev->v4l2_dev);
3178
3179 if (dev->users) {
3180 em28xx_warn
3181 ("device %s is open! Deregistration and memory "
3182 "deallocation are deferred on close.\n",
3183 video_device_node_name(dev->vdev));
3184
3185 dev->state |= DEV_MISCONFIGURED;
3186 em28xx_uninit_isoc(dev);
3187 dev->state |= DEV_DISCONNECTED;
3188 wake_up_interruptible(&dev->wait_frame);
3189 wake_up_interruptible(&dev->wait_stream);
3190 } else {
3191 dev->state |= DEV_DISCONNECTED;
3192 em28xx_release_resources(dev);
3193 }
3194
3195 em28xx_close_extension(dev);
3196
3197 mutex_unlock(&dev->lock);
3198
3199 if (!dev->users) {
3200 kfree(dev->alt_max_pkt_size);
3201 kfree(dev);
3202 }
3203}
3204
3205static struct usb_driver em28xx_usb_driver = {
3206 .name = "em28xx",
3207 .probe = em28xx_usb_probe,
3208 .disconnect = em28xx_usb_disconnect,
3209 .id_table = em28xx_id_table,
3210};
3211
3212static int __init em28xx_module_init(void)
3213{
3214 int result;
3215
3216 /* register this driver with the USB subsystem */
3217 result = usb_register(&em28xx_usb_driver);
3218 if (result)
3219 em28xx_err(DRIVER_NAME
3220 " usb_register failed. Error number %d.\n", result);
3221
3222 printk(KERN_INFO DRIVER_NAME " driver loaded\n");
3223
3224 return result;
3225}
3226
3227static void __exit em28xx_module_exit(void)
3228{
3229 /* deregister this driver with the USB subsystem */
3230 usb_deregister(&em28xx_usb_driver);
3231}
3232
3233module_init(em28xx_module_init);
3234module_exit(em28xx_module_exit);
Linux kernel - Deliverables
This page took 0.045226 seconds and 5 git commands to generate.