| 1 | # |
| 2 | # Multifunction miscellaneous devices |
| 3 | # |
| 4 | |
| 5 | if HAS_IOMEM |
| 6 | menu "Multifunction device drivers" |
| 7 | |
| 8 | config MFD_CORE |
| 9 | tristate |
| 10 | select IRQ_DOMAIN |
| 11 | default n |
| 12 | |
| 13 | config MFD_CS5535 |
| 14 | tristate "AMD CS5535 and CS5536 southbridge core functions" |
| 15 | select MFD_CORE |
| 16 | depends on PCI && (X86_32 || (X86 && COMPILE_TEST)) |
| 17 | ---help--- |
| 18 | This is the core driver for CS5535/CS5536 MFD functions. This is |
| 19 | necessary for using the board's GPIO and MFGPT functionality. |
| 20 | |
| 21 | config MFD_ALTERA_A10SR |
| 22 | bool "Altera Arria10 DevKit System Resource chip" |
| 23 | depends on ARCH_SOCFPGA && SPI_MASTER=y && OF |
| 24 | select REGMAP_SPI |
| 25 | select MFD_CORE |
| 26 | help |
| 27 | Support for the Altera Arria10 DevKit MAX5 System Resource chip |
| 28 | using the SPI interface. This driver provides common support for |
| 29 | accessing the external gpio extender (LEDs & buttons) and |
| 30 | power supply alarms (hwmon). |
| 31 | |
| 32 | config MFD_ACT8945A |
| 33 | tristate "Active-semi ACT8945A" |
| 34 | select MFD_CORE |
| 35 | select REGMAP_I2C |
| 36 | depends on I2C && OF |
| 37 | help |
| 38 | Support for the ACT8945A PMIC from Active-semi. This device |
| 39 | features three step-down DC/DC converters and four low-dropout |
| 40 | linear regulators, along with a complete ActivePath battery |
| 41 | charger. |
| 42 | |
| 43 | config MFD_AS3711 |
| 44 | bool "AMS AS3711" |
| 45 | select MFD_CORE |
| 46 | select REGMAP_I2C |
| 47 | select REGMAP_IRQ |
| 48 | depends on I2C=y |
| 49 | help |
| 50 | Support for the AS3711 PMIC from AMS |
| 51 | |
| 52 | config MFD_AS3722 |
| 53 | bool "ams AS3722 Power Management IC" |
| 54 | select MFD_CORE |
| 55 | select REGMAP_I2C |
| 56 | select REGMAP_IRQ |
| 57 | depends on I2C=y && OF |
| 58 | help |
| 59 | The ams AS3722 is a compact system PMU suitable for mobile phones, |
| 60 | tablets etc. It has 4 DC/DC step-down regulators, 3 DC/DC step-down |
| 61 | controllers, 11 LDOs, RTC, automatic battery, temperature and |
| 62 | over current monitoring, GPIOs, ADC and a watchdog. |
| 63 | |
| 64 | config PMIC_ADP5520 |
| 65 | bool "Analog Devices ADP5520/01 MFD PMIC Core Support" |
| 66 | depends on I2C=y |
| 67 | help |
| 68 | Say yes here to add support for Analog Devices AD5520 and ADP5501, |
| 69 | Multifunction Power Management IC. This includes |
| 70 | the I2C driver and the core APIs _only_, you have to select |
| 71 | individual components like LCD backlight, LEDs, GPIOs and Kepad |
| 72 | under the corresponding menus. |
| 73 | |
| 74 | config MFD_AAT2870_CORE |
| 75 | bool "AnalogicTech AAT2870" |
| 76 | select MFD_CORE |
| 77 | depends on I2C=y |
| 78 | depends on GPIOLIB || COMPILE_TEST |
| 79 | help |
| 80 | If you say yes here you get support for the AAT2870. |
| 81 | This driver provides common support for accessing the device, |
| 82 | additional drivers must be enabled in order to use the |
| 83 | functionality of the device. |
| 84 | |
| 85 | config MFD_ATMEL_FLEXCOM |
| 86 | tristate "Atmel Flexcom (Flexible Serial Communication Unit)" |
| 87 | select MFD_CORE |
| 88 | depends on OF |
| 89 | help |
| 90 | Select this to get support for Atmel Flexcom. This is a wrapper |
| 91 | which embeds a SPI controller, a I2C controller and a USART. Only |
| 92 | one function can be used at a time. The choice is done at boot time |
| 93 | by the probe function of this MFD driver according to a device tree |
| 94 | property. |
| 95 | |
| 96 | config MFD_ATMEL_HLCDC |
| 97 | tristate "Atmel HLCDC (High-end LCD Controller)" |
| 98 | select MFD_CORE |
| 99 | select REGMAP_MMIO |
| 100 | depends on OF |
| 101 | help |
| 102 | If you say yes here you get support for the HLCDC block. |
| 103 | This driver provides common support for accessing the device, |
| 104 | additional drivers must be enabled in order to use the |
| 105 | functionality of the device. |
| 106 | |
| 107 | config MFD_BCM590XX |
| 108 | tristate "Broadcom BCM590xx PMUs" |
| 109 | select MFD_CORE |
| 110 | select REGMAP_I2C |
| 111 | depends on I2C |
| 112 | help |
| 113 | Support for the BCM590xx PMUs from Broadcom |
| 114 | |
| 115 | config MFD_AXP20X |
| 116 | tristate |
| 117 | select MFD_CORE |
| 118 | select REGMAP_IRQ |
| 119 | |
| 120 | config MFD_AXP20X_I2C |
| 121 | tristate "X-Powers AXP series PMICs with I2C" |
| 122 | select MFD_AXP20X |
| 123 | select REGMAP_I2C |
| 124 | depends on I2C |
| 125 | help |
| 126 | If you say Y here you get support for the X-Powers AXP series power |
| 127 | management ICs (PMICs) controlled with I2C. |
| 128 | This driver include only the core APIs. You have to select individual |
| 129 | components like regulators or the PEK (Power Enable Key) under the |
| 130 | corresponding menus. |
| 131 | |
| 132 | config MFD_AXP20X_RSB |
| 133 | tristate "X-Powers AXP series PMICs with RSB" |
| 134 | select MFD_AXP20X |
| 135 | depends on SUNXI_RSB |
| 136 | help |
| 137 | If you say Y here you get support for the X-Powers AXP series power |
| 138 | management ICs (PMICs) controlled with RSB. |
| 139 | This driver include only the core APIs. You have to select individual |
| 140 | components like regulators or the PEK (Power Enable Key) under the |
| 141 | corresponding menus. |
| 142 | |
| 143 | config MFD_CROS_EC |
| 144 | tristate "ChromeOS Embedded Controller" |
| 145 | select MFD_CORE |
| 146 | select CHROME_PLATFORMS |
| 147 | select CROS_EC_PROTO |
| 148 | depends on X86 || ARM || ARM64 || COMPILE_TEST |
| 149 | help |
| 150 | If you say Y here you get support for the ChromeOS Embedded |
| 151 | Controller (EC) providing keyboard, battery and power services. |
| 152 | You also need to enable the driver for the bus you are using. The |
| 153 | protocol for talking to the EC is defined by the bus driver. |
| 154 | |
| 155 | config MFD_CROS_EC_I2C |
| 156 | tristate "ChromeOS Embedded Controller (I2C)" |
| 157 | depends on MFD_CROS_EC && I2C |
| 158 | |
| 159 | help |
| 160 | If you say Y here, you get support for talking to the ChromeOS |
| 161 | EC through an I2C bus. This uses a simple byte-level protocol with |
| 162 | a checksum. Failing accesses will be retried three times to |
| 163 | improve reliability. |
| 164 | |
| 165 | config MFD_CROS_EC_SPI |
| 166 | tristate "ChromeOS Embedded Controller (SPI)" |
| 167 | depends on MFD_CROS_EC && SPI |
| 168 | |
| 169 | ---help--- |
| 170 | If you say Y here, you get support for talking to the ChromeOS EC |
| 171 | through a SPI bus, using a byte-level protocol. Since the EC's |
| 172 | response time cannot be guaranteed, we support ignoring |
| 173 | 'pre-amble' bytes before the response actually starts. |
| 174 | |
| 175 | config MFD_ASIC3 |
| 176 | bool "Compaq ASIC3" |
| 177 | depends on GPIOLIB && ARM |
| 178 | select MFD_CORE |
| 179 | ---help--- |
| 180 | This driver supports the ASIC3 multifunction chip found on many |
| 181 | PDAs (mainly iPAQ and HTC based ones) |
| 182 | |
| 183 | config PMIC_DA903X |
| 184 | bool "Dialog Semiconductor DA9030/DA9034 PMIC Support" |
| 185 | depends on I2C=y |
| 186 | help |
| 187 | Say yes here to add support for Dialog Semiconductor DA9030 (a.k.a |
| 188 | ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC |
| 189 | usually found on PXA processors-based platforms. This includes |
| 190 | the I2C driver and the core APIs _only_, you have to select |
| 191 | individual components like LCD backlight, voltage regulators, |
| 192 | LEDs and battery-charger under the corresponding menus. |
| 193 | |
| 194 | config PMIC_DA9052 |
| 195 | bool |
| 196 | select MFD_CORE |
| 197 | |
| 198 | config MFD_DA9052_SPI |
| 199 | bool "Dialog Semiconductor DA9052/53 PMIC variants with SPI" |
| 200 | select REGMAP_SPI |
| 201 | select REGMAP_IRQ |
| 202 | select PMIC_DA9052 |
| 203 | depends on SPI_MASTER=y |
| 204 | help |
| 205 | Support for the Dialog Semiconductor DA9052 PMIC |
| 206 | when controlled using SPI. This driver provides common support |
| 207 | for accessing the device, additional drivers must be enabled in |
| 208 | order to use the functionality of the device. |
| 209 | |
| 210 | config MFD_DA9052_I2C |
| 211 | bool "Dialog Semiconductor DA9052/53 PMIC variants with I2C" |
| 212 | select REGMAP_I2C |
| 213 | select REGMAP_IRQ |
| 214 | select PMIC_DA9052 |
| 215 | depends on I2C=y |
| 216 | help |
| 217 | Support for the Dialog Semiconductor DA9052 PMIC |
| 218 | when controlled using I2C. This driver provides common support |
| 219 | for accessing the device, additional drivers must be enabled in |
| 220 | order to use the functionality of the device. |
| 221 | |
| 222 | config MFD_DA9055 |
| 223 | bool "Dialog Semiconductor DA9055 PMIC Support" |
| 224 | select REGMAP_I2C |
| 225 | select REGMAP_IRQ |
| 226 | select MFD_CORE |
| 227 | depends on I2C=y |
| 228 | help |
| 229 | Say yes here for support of Dialog Semiconductor DA9055. This is |
| 230 | a Power Management IC. This driver provides common support for |
| 231 | accessing the device as well as the I2C interface to the chip itself. |
| 232 | Additional drivers must be enabled in order to use the functionality |
| 233 | of the device. |
| 234 | |
| 235 | This driver can be built as a module. If built as a module it will be |
| 236 | called "da9055" |
| 237 | |
| 238 | config MFD_DA9062 |
| 239 | tristate "Dialog Semiconductor DA9062 PMIC Support" |
| 240 | select MFD_CORE |
| 241 | select REGMAP_I2C |
| 242 | select REGMAP_IRQ |
| 243 | depends on I2C |
| 244 | help |
| 245 | Say yes here for support for the Dialog Semiconductor DA9062 PMIC. |
| 246 | This includes the I2C driver and core APIs. |
| 247 | Additional drivers must be enabled in order to use the functionality |
| 248 | of the device. |
| 249 | |
| 250 | config MFD_DA9063 |
| 251 | tristate "Dialog Semiconductor DA9063 PMIC Support" |
| 252 | select MFD_CORE |
| 253 | select REGMAP_I2C |
| 254 | select REGMAP_IRQ |
| 255 | depends on I2C |
| 256 | help |
| 257 | Say yes here for support for the Dialog Semiconductor DA9063 PMIC. |
| 258 | This includes the I2C driver and core APIs. |
| 259 | Additional drivers must be enabled in order to use the functionality |
| 260 | of the device. |
| 261 | |
| 262 | config MFD_DA9150 |
| 263 | tristate "Dialog Semiconductor DA9150 Charger Fuel-Gauge chip" |
| 264 | depends on I2C |
| 265 | select MFD_CORE |
| 266 | select REGMAP_I2C |
| 267 | select REGMAP_IRQ |
| 268 | help |
| 269 | This adds support for the DA9150 integrated charger and fuel-gauge |
| 270 | chip. This driver provides common support for accessing the device. |
| 271 | Additional drivers must be enabled in order to use the specific |
| 272 | features of the device. |
| 273 | |
| 274 | config MFD_DLN2 |
| 275 | tristate "Diolan DLN2 support" |
| 276 | select MFD_CORE |
| 277 | depends on USB |
| 278 | help |
| 279 | This adds support for Diolan USB-I2C/SPI/GPIO Master Adapter |
| 280 | DLN-2. Additional drivers such as I2C_DLN2, GPIO_DLN2, |
| 281 | etc. must be enabled in order to use the functionality of |
| 282 | the device. |
| 283 | |
| 284 | config MFD_MC13XXX |
| 285 | tristate |
| 286 | depends on (SPI_MASTER || I2C) |
| 287 | select MFD_CORE |
| 288 | select REGMAP_IRQ |
| 289 | help |
| 290 | Enable support for the Freescale MC13783 and MC13892 PMICs. |
| 291 | This driver provides common support for accessing the device, |
| 292 | additional drivers must be enabled in order to use the |
| 293 | functionality of the device. |
| 294 | |
| 295 | config MFD_MC13XXX_SPI |
| 296 | tristate "Freescale MC13783 and MC13892 SPI interface" |
| 297 | depends on SPI_MASTER |
| 298 | select REGMAP_SPI |
| 299 | select MFD_MC13XXX |
| 300 | help |
| 301 | Select this if your MC13xxx is connected via an SPI bus. |
| 302 | |
| 303 | config MFD_MC13XXX_I2C |
| 304 | tristate "Freescale MC13892 I2C interface" |
| 305 | depends on I2C |
| 306 | select REGMAP_I2C |
| 307 | select MFD_MC13XXX |
| 308 | help |
| 309 | Select this if your MC13xxx is connected via an I2C bus. |
| 310 | |
| 311 | config MFD_MX25_TSADC |
| 312 | tristate "Freescale i.MX25 integrated Touchscreen and ADC unit" |
| 313 | select REGMAP_MMIO |
| 314 | depends on (SOC_IMX25 && OF) || COMPILE_TEST |
| 315 | help |
| 316 | Enable support for the integrated Touchscreen and ADC unit of the |
| 317 | i.MX25 processors. They consist of a conversion queue for general |
| 318 | purpose ADC and a queue for Touchscreens. |
| 319 | |
| 320 | config MFD_HI6421_PMIC |
| 321 | tristate "HiSilicon Hi6421 PMU/Codec IC" |
| 322 | depends on OF |
| 323 | select MFD_CORE |
| 324 | select REGMAP_MMIO |
| 325 | help |
| 326 | Add support for HiSilicon Hi6421 PMIC. Hi6421 includes multi- |
| 327 | functions, such as regulators, RTC, codec, Coulomb counter, etc. |
| 328 | This driver includes core APIs _only_. You have to select |
| 329 | individul components like voltage regulators under corresponding |
| 330 | menus in order to enable them. |
| 331 | We communicate with the Hi6421 via memory-mapped I/O. |
| 332 | |
| 333 | config MFD_HI655X_PMIC |
| 334 | tristate "HiSilicon Hi655X series PMU/Codec IC" |
| 335 | depends on ARCH_HISI || COMPILE_TEST |
| 336 | depends on OF |
| 337 | select MFD_CORE |
| 338 | select REGMAP_MMIO |
| 339 | select REGMAP_IRQ |
| 340 | help |
| 341 | Select this option to enable Hisilicon hi655x series pmic driver. |
| 342 | |
| 343 | config HTC_EGPIO |
| 344 | bool "HTC EGPIO support" |
| 345 | depends on GPIOLIB && ARM |
| 346 | help |
| 347 | This driver supports the CPLD egpio chip present on |
| 348 | several HTC phones. It provides basic support for input |
| 349 | pins, output pins, and irqs. |
| 350 | |
| 351 | config HTC_PASIC3 |
| 352 | tristate "HTC PASIC3 LED/DS1WM chip support" |
| 353 | select MFD_CORE |
| 354 | help |
| 355 | This core driver provides register access for the LED/DS1WM |
| 356 | chips labeled "AIC2" and "AIC3", found on HTC Blueangel and |
| 357 | HTC Magician devices, respectively. Actual functionality is |
| 358 | handled by the leds-pasic3 and ds1wm drivers. |
| 359 | |
| 360 | config HTC_I2CPLD |
| 361 | bool "HTC I2C PLD chip support" |
| 362 | depends on I2C=y && GPIOLIB |
| 363 | help |
| 364 | If you say yes here you get support for the supposed CPLD |
| 365 | found on omap850 HTC devices like the HTC Wizard and HTC Herald. |
| 366 | This device provides input and output GPIOs through an I2C |
| 367 | interface to one or more sub-chips. |
| 368 | |
| 369 | config MFD_INTEL_QUARK_I2C_GPIO |
| 370 | tristate "Intel Quark MFD I2C GPIO" |
| 371 | depends on PCI |
| 372 | depends on X86 |
| 373 | depends on COMMON_CLK |
| 374 | select MFD_CORE |
| 375 | help |
| 376 | This MFD provides support for I2C and GPIO that exist only |
| 377 | in a single PCI device. It splits the 2 IO devices to |
| 378 | their respective IO driver. |
| 379 | The GPIO exports a total amount of 8 interrupt-capable GPIOs. |
| 380 | |
| 381 | config LPC_ICH |
| 382 | tristate "Intel ICH LPC" |
| 383 | depends on PCI |
| 384 | select MFD_CORE |
| 385 | help |
| 386 | The LPC bridge function of the Intel ICH provides support for |
| 387 | many functional units. This driver provides needed support for |
| 388 | other drivers to control these functions, currently GPIO and |
| 389 | watchdog. |
| 390 | |
| 391 | config LPC_SCH |
| 392 | tristate "Intel SCH LPC" |
| 393 | depends on PCI |
| 394 | select MFD_CORE |
| 395 | help |
| 396 | LPC bridge function of the Intel SCH provides support for |
| 397 | System Management Bus and General Purpose I/O. |
| 398 | |
| 399 | config INTEL_SOC_PMIC |
| 400 | bool "Support for Intel Atom SoC PMIC" |
| 401 | depends on GPIOLIB |
| 402 | depends on I2C=y |
| 403 | select MFD_CORE |
| 404 | select REGMAP_I2C |
| 405 | select REGMAP_IRQ |
| 406 | help |
| 407 | Select this option to enable support for the PMIC device |
| 408 | on some Intel SoC systems. The PMIC provides ADC, GPIO, |
| 409 | thermal, charger and related power management functions |
| 410 | on these systems. |
| 411 | |
| 412 | config MFD_INTEL_LPSS |
| 413 | tristate |
| 414 | select COMMON_CLK |
| 415 | select MFD_CORE |
| 416 | |
| 417 | config MFD_INTEL_LPSS_ACPI |
| 418 | tristate "Intel Low Power Subsystem support in ACPI mode" |
| 419 | select MFD_INTEL_LPSS |
| 420 | depends on X86 && ACPI |
| 421 | help |
| 422 | This driver supports Intel Low Power Subsystem (LPSS) devices such as |
| 423 | I2C, SPI and HS-UART starting from Intel Sunrisepoint (Intel Skylake |
| 424 | PCH) in ACPI mode. |
| 425 | |
| 426 | config MFD_INTEL_LPSS_PCI |
| 427 | tristate "Intel Low Power Subsystem support in PCI mode" |
| 428 | select MFD_INTEL_LPSS |
| 429 | depends on X86 && PCI |
| 430 | help |
| 431 | This driver supports Intel Low Power Subsystem (LPSS) devices such as |
| 432 | I2C, SPI and HS-UART starting from Intel Sunrisepoint (Intel Skylake |
| 433 | PCH) in PCI mode. |
| 434 | |
| 435 | config MFD_INTEL_MSIC |
| 436 | bool "Intel MSIC" |
| 437 | depends on INTEL_SCU_IPC |
| 438 | select MFD_CORE |
| 439 | help |
| 440 | Select this option to enable access to Intel MSIC (Avatele |
| 441 | Passage) chip. This chip embeds audio, battery, GPIO, etc. |
| 442 | devices used in Intel Medfield platforms. |
| 443 | |
| 444 | config MFD_IPAQ_MICRO |
| 445 | bool "Atmel Micro ASIC (iPAQ h3100/h3600/h3700) Support" |
| 446 | depends on SA1100_H3100 || SA1100_H3600 |
| 447 | select MFD_CORE |
| 448 | help |
| 449 | Select this to get support for the Microcontroller found in |
| 450 | the Compaq iPAQ handheld computers. This is an Atmel |
| 451 | AT90LS8535 microcontroller flashed with a special iPAQ |
| 452 | firmware using the custom protocol implemented in this driver. |
| 453 | |
| 454 | config MFD_JANZ_CMODIO |
| 455 | tristate "Janz CMOD-IO PCI MODULbus Carrier Board" |
| 456 | select MFD_CORE |
| 457 | depends on PCI |
| 458 | help |
| 459 | This is the core driver for the Janz CMOD-IO PCI MODULbus |
| 460 | carrier board. This device is a PCI to MODULbus bridge which may |
| 461 | host many different types of MODULbus daughterboards, including |
| 462 | CAN and GPIO controllers. |
| 463 | |
| 464 | config MFD_JZ4740_ADC |
| 465 | bool "Janz JZ4740 ADC core" |
| 466 | select MFD_CORE |
| 467 | select GENERIC_IRQ_CHIP |
| 468 | depends on MACH_JZ4740 |
| 469 | help |
| 470 | Say yes here if you want support for the ADC unit in the JZ4740 SoC. |
| 471 | This driver is necessary for jz4740-battery and jz4740-hwmon driver. |
| 472 | |
| 473 | config MFD_KEMPLD |
| 474 | tristate "Kontron module PLD device" |
| 475 | select MFD_CORE |
| 476 | help |
| 477 | This is the core driver for the PLD (Programmable Logic Device) found |
| 478 | on some Kontron ETX and COMexpress (ETXexpress) modules. The PLD |
| 479 | device may provide functions like watchdog, GPIO, UART and I2C bus. |
| 480 | |
| 481 | The following modules are supported: |
| 482 | * COMe-bBL6 |
| 483 | * COMe-bHL6 |
| 484 | * COMe-bIP# |
| 485 | * COMe-bPC2 (ETXexpress-PC) |
| 486 | * COMe-bSC# (ETXexpress-SC T#) |
| 487 | * COMe-cBL6 |
| 488 | * COMe-cBT6 |
| 489 | * COMe-cBW6 |
| 490 | * COMe-cCT6 |
| 491 | * COMe-cDC2 (microETXexpress-DC) |
| 492 | * COMe-cHL6 |
| 493 | * COMe-cPC2 (microETXexpress-PC) |
| 494 | * COMe-cSL6 |
| 495 | * COMe-mAL10 |
| 496 | * COMe-mBT10 |
| 497 | * COMe-mCT10 |
| 498 | * COMe-mTT10 (nanoETXexpress-TT) |
| 499 | * ETX-OH |
| 500 | |
| 501 | This driver can also be built as a module. If so, the module |
| 502 | will be called kempld-core. |
| 503 | |
| 504 | config MFD_88PM800 |
| 505 | tristate "Marvell 88PM800" |
| 506 | depends on I2C |
| 507 | select REGMAP_I2C |
| 508 | select REGMAP_IRQ |
| 509 | select MFD_CORE |
| 510 | help |
| 511 | This supports for Marvell 88PM800 Power Management IC. |
| 512 | This includes the I2C driver and the core APIs _only_, you have to |
| 513 | select individual components like voltage regulators, RTC and |
| 514 | battery-charger under the corresponding menus. |
| 515 | |
| 516 | config MFD_88PM805 |
| 517 | tristate "Marvell 88PM805" |
| 518 | depends on I2C |
| 519 | select REGMAP_I2C |
| 520 | select REGMAP_IRQ |
| 521 | select MFD_CORE |
| 522 | help |
| 523 | This supports for Marvell 88PM805 Power Management IC. This includes |
| 524 | the I2C driver and the core APIs _only_, you have to select individual |
| 525 | components like codec device, headset/Mic device under the |
| 526 | corresponding menus. |
| 527 | |
| 528 | config MFD_88PM860X |
| 529 | bool "Marvell 88PM8606/88PM8607" |
| 530 | depends on I2C=y |
| 531 | select REGMAP_I2C |
| 532 | select MFD_CORE |
| 533 | help |
| 534 | This supports for Marvell 88PM8606/88PM8607 Power Management IC. |
| 535 | This includes the I2C driver and the core APIs _only_, you have to |
| 536 | select individual components like voltage regulators, RTC and |
| 537 | battery-charger under the corresponding menus. |
| 538 | |
| 539 | config MFD_MAX14577 |
| 540 | tristate "Maxim Semiconductor MAX14577/77836 MUIC + Charger Support" |
| 541 | depends on I2C |
| 542 | select MFD_CORE |
| 543 | select REGMAP_I2C |
| 544 | select REGMAP_IRQ |
| 545 | select IRQ_DOMAIN |
| 546 | help |
| 547 | Say yes here to add support for Maxim Semiconductor MAX14577 and |
| 548 | MAX77836 Micro-USB ICs with battery charger. |
| 549 | This driver provides common support for accessing the device; |
| 550 | additional drivers must be enabled in order to use the functionality |
| 551 | of the device. |
| 552 | |
| 553 | config MFD_MAX77620 |
| 554 | bool "Maxim Semiconductor MAX77620 and MAX20024 PMIC Support" |
| 555 | depends on I2C=y |
| 556 | depends on OF |
| 557 | select MFD_CORE |
| 558 | select REGMAP_I2C |
| 559 | select REGMAP_IRQ |
| 560 | select IRQ_DOMAIN |
| 561 | help |
| 562 | Say yes here to add support for Maxim Semiconductor MAX77620 and |
| 563 | MAX20024 which are Power Management IC with General purpose pins, |
| 564 | RTC, regulators, clock generator, watchdog etc. This driver |
| 565 | provides common support for accessing the device; additional drivers |
| 566 | must be enabled in order to use the functionality of the device. |
| 567 | |
| 568 | config MFD_MAX77686 |
| 569 | tristate "Maxim Semiconductor MAX77686/802 PMIC Support" |
| 570 | depends on I2C |
| 571 | depends on OF |
| 572 | select MFD_CORE |
| 573 | select REGMAP_I2C |
| 574 | select REGMAP_IRQ |
| 575 | select IRQ_DOMAIN |
| 576 | help |
| 577 | Say yes here to add support for Maxim Semiconductor MAX77686 and |
| 578 | MAX77802 which are Power Management IC with an RTC on chip. |
| 579 | This driver provides common support for accessing the device; |
| 580 | additional drivers must be enabled in order to use the functionality |
| 581 | of the device. |
| 582 | |
| 583 | config MFD_MAX77693 |
| 584 | tristate "Maxim Semiconductor MAX77693 PMIC Support" |
| 585 | depends on I2C |
| 586 | select MFD_CORE |
| 587 | select REGMAP_I2C |
| 588 | select REGMAP_IRQ |
| 589 | help |
| 590 | Say yes here to add support for Maxim Semiconductor MAX77693. |
| 591 | This is a companion Power Management IC with Flash, Haptic, Charger, |
| 592 | and MUIC(Micro USB Interface Controller) controls on chip. |
| 593 | This driver provides common support for accessing the device; |
| 594 | additional drivers must be enabled in order to use the functionality |
| 595 | of the device. |
| 596 | |
| 597 | config MFD_MAX77843 |
| 598 | bool "Maxim Semiconductor MAX77843 PMIC Support" |
| 599 | depends on I2C=y |
| 600 | select MFD_CORE |
| 601 | select REGMAP_I2C |
| 602 | select REGMAP_IRQ |
| 603 | help |
| 604 | Say yes here to add support for Maxim Semiconductor MAX77843. |
| 605 | This is companion Power Management IC with LEDs, Haptic, Charger, |
| 606 | Fuel Gauge, MUIC(Micro USB Interface Controller) controls on chip. |
| 607 | This driver provides common support for accessing the device; |
| 608 | additional drivers must be enabled in order to use the functionality |
| 609 | of the device. |
| 610 | |
| 611 | config MFD_MAX8907 |
| 612 | tristate "Maxim Semiconductor MAX8907 PMIC Support" |
| 613 | select MFD_CORE |
| 614 | depends on I2C |
| 615 | select REGMAP_I2C |
| 616 | select REGMAP_IRQ |
| 617 | help |
| 618 | Say yes here to add support for Maxim Semiconductor MAX8907. This is |
| 619 | a Power Management IC. This driver provides common support for |
| 620 | accessing the device; additional drivers must be enabled in order |
| 621 | to use the functionality of the device. |
| 622 | |
| 623 | config MFD_MAX8925 |
| 624 | bool "Maxim Semiconductor MAX8925 PMIC Support" |
| 625 | depends on I2C=y |
| 626 | select MFD_CORE |
| 627 | help |
| 628 | Say yes here to add support for Maxim Semiconductor MAX8925. This is |
| 629 | a Power Management IC. This driver provides common support for |
| 630 | accessing the device, additional drivers must be enabled in order |
| 631 | to use the functionality of the device. |
| 632 | |
| 633 | config MFD_MAX8997 |
| 634 | bool "Maxim Semiconductor MAX8997/8966 PMIC Support" |
| 635 | depends on I2C=y |
| 636 | select MFD_CORE |
| 637 | select IRQ_DOMAIN |
| 638 | help |
| 639 | Say yes here to add support for Maxim Semiconductor MAX8997/8966. |
| 640 | This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic, |
| 641 | MUIC controls on chip. |
| 642 | This driver provides common support for accessing the device; |
| 643 | additional drivers must be enabled in order to use the functionality |
| 644 | of the device. |
| 645 | |
| 646 | config MFD_MAX8998 |
| 647 | bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support" |
| 648 | depends on I2C=y |
| 649 | select MFD_CORE |
| 650 | select IRQ_DOMAIN |
| 651 | help |
| 652 | Say yes here to add support for Maxim Semiconductor MAX8998 and |
| 653 | National Semiconductor LP3974. This is a Power Management IC. |
| 654 | This driver provides common support for accessing the device, |
| 655 | additional drivers must be enabled in order to use the functionality |
| 656 | of the device. |
| 657 | |
| 658 | config MFD_MT6397 |
| 659 | tristate "MediaTek MT6397 PMIC Support" |
| 660 | select MFD_CORE |
| 661 | select IRQ_DOMAIN |
| 662 | help |
| 663 | Say yes here to add support for MediaTek MT6397 PMIC. This is |
| 664 | a Power Management IC. This driver provides common support for |
| 665 | accessing the device; additional drivers must be enabled in order |
| 666 | to use the functionality of the device. |
| 667 | |
| 668 | config MFD_MENF21BMC |
| 669 | tristate "MEN 14F021P00 Board Management Controller Support" |
| 670 | depends on I2C |
| 671 | select MFD_CORE |
| 672 | help |
| 673 | Say yes here to add support for the MEN 14F021P00 BMC |
| 674 | which is a Board Management Controller connected to the I2C bus. |
| 675 | The device supports multiple sub-devices like LED, HWMON and WDT. |
| 676 | This driver provides common support for accessing the devices; |
| 677 | additional drivers must be enabled in order to use the |
| 678 | functionality of the BMC device. |
| 679 | |
| 680 | This driver can also be built as a module. If so the module |
| 681 | will be called menf21bmc. |
| 682 | |
| 683 | config EZX_PCAP |
| 684 | bool "Motorola EZXPCAP Support" |
| 685 | depends on SPI_MASTER |
| 686 | help |
| 687 | This enables the PCAP ASIC present on EZX Phones. This is |
| 688 | needed for MMC, TouchScreen, Sound, USB, etc.. |
| 689 | |
| 690 | config MFD_VIPERBOARD |
| 691 | tristate "Nano River Technologies Viperboard" |
| 692 | select MFD_CORE |
| 693 | depends on USB |
| 694 | default n |
| 695 | help |
| 696 | Say yes here if you want support for Nano River Technologies |
| 697 | Viperboard. |
| 698 | There are mfd cell drivers available for i2c master, adc and |
| 699 | both gpios found on the board. The spi part does not yet |
| 700 | have a driver. |
| 701 | You need to select the mfd cell drivers separately. |
| 702 | The drivers do not support all features the board exposes. |
| 703 | |
| 704 | config MFD_RETU |
| 705 | tristate "Nokia Retu and Tahvo multi-function device" |
| 706 | select MFD_CORE |
| 707 | depends on I2C |
| 708 | select REGMAP_IRQ |
| 709 | help |
| 710 | Retu and Tahvo are a multi-function devices found on Nokia |
| 711 | Internet Tablets (770, N800 and N810). |
| 712 | |
| 713 | config MFD_PCF50633 |
| 714 | tristate "NXP PCF50633" |
| 715 | depends on I2C |
| 716 | select REGMAP_I2C |
| 717 | help |
| 718 | Say yes here if you have NXP PCF50633 chip on your board. |
| 719 | This core driver provides register access and IRQ handling |
| 720 | facilities, and registers devices for the various functions |
| 721 | so that function-specific drivers can bind to them. |
| 722 | |
| 723 | config PCF50633_ADC |
| 724 | tristate "NXP PCF50633 ADC" |
| 725 | depends on MFD_PCF50633 |
| 726 | help |
| 727 | Say yes here if you want to include support for ADC in the |
| 728 | NXP PCF50633 chip. |
| 729 | |
| 730 | config PCF50633_GPIO |
| 731 | tristate "NXP PCF50633 GPIO" |
| 732 | depends on MFD_PCF50633 |
| 733 | help |
| 734 | Say yes here if you want to include support GPIO for pins on |
| 735 | the PCF50633 chip. |
| 736 | |
| 737 | config UCB1400_CORE |
| 738 | tristate "Philips UCB1400 Core driver" |
| 739 | depends on AC97_BUS |
| 740 | depends on GPIOLIB |
| 741 | help |
| 742 | This enables support for the Philips UCB1400 core functions. |
| 743 | The UCB1400 is an AC97 audio codec. |
| 744 | |
| 745 | To compile this driver as a module, choose M here: the |
| 746 | module will be called ucb1400_core. |
| 747 | |
| 748 | config MFD_PM8XXX |
| 749 | tristate |
| 750 | |
| 751 | config MFD_PM8921_CORE |
| 752 | tristate "Qualcomm PM8921 PMIC chip" |
| 753 | depends on (ARM || HEXAGON) |
| 754 | select IRQ_DOMAIN |
| 755 | select MFD_CORE |
| 756 | select MFD_PM8XXX |
| 757 | select REGMAP |
| 758 | help |
| 759 | If you say yes to this option, support will be included for the |
| 760 | built-in PM8921 PMIC chip. |
| 761 | |
| 762 | This is required if your board has a PM8921 and uses its features, |
| 763 | such as: MPPs, GPIOs, regulators, interrupts, and PWM. |
| 764 | |
| 765 | Say M here if you want to include support for PM8921 chip as a module. |
| 766 | This will build a module called "pm8921-core". |
| 767 | |
| 768 | config MFD_QCOM_RPM |
| 769 | tristate "Qualcomm Resource Power Manager (RPM)" |
| 770 | depends on ARCH_QCOM && OF |
| 771 | help |
| 772 | If you say yes to this option, support will be included for the |
| 773 | Resource Power Manager system found in the Qualcomm 8660, 8960 and |
| 774 | 8064 based devices. |
| 775 | |
| 776 | This is required to access many regulators, clocks and bus |
| 777 | frequencies controlled by the RPM on these devices. |
| 778 | |
| 779 | Say M here if you want to include support for the Qualcomm RPM as a |
| 780 | module. This will build a module called "qcom_rpm". |
| 781 | |
| 782 | config MFD_SPMI_PMIC |
| 783 | tristate "Qualcomm SPMI PMICs" |
| 784 | depends on ARCH_QCOM || COMPILE_TEST |
| 785 | depends on OF |
| 786 | depends on SPMI |
| 787 | select REGMAP_SPMI |
| 788 | help |
| 789 | This enables support for the Qualcomm SPMI PMICs. |
| 790 | These PMICs are currently used with the Snapdragon 800 series of |
| 791 | SoCs. Note, that this will only be useful paired with descriptions |
| 792 | of the independent functions as children nodes in the device tree. |
| 793 | |
| 794 | Say M here if you want to include support for the SPMI PMIC |
| 795 | series as a module. The module will be called "qcom-spmi-pmic". |
| 796 | |
| 797 | config MFD_RDC321X |
| 798 | tristate "RDC R-321x southbridge" |
| 799 | select MFD_CORE |
| 800 | depends on PCI |
| 801 | help |
| 802 | Say yes here if you want to have support for the RDC R-321x SoC |
| 803 | southbridge which provides access to GPIOs and Watchdog using the |
| 804 | southbridge PCI device configuration space. |
| 805 | |
| 806 | config MFD_RTSX_PCI |
| 807 | tristate "Realtek PCI-E card reader" |
| 808 | depends on PCI |
| 809 | select MFD_CORE |
| 810 | help |
| 811 | This supports for Realtek PCI-Express card reader including rts5209, |
| 812 | rts5227, rts522A, rts5229, rts5249, rts524A, rts525A, rtl8411, etc. |
| 813 | Realtek card reader supports access to many types of memory cards, |
| 814 | such as Memory Stick, Memory Stick Pro, Secure Digital and |
| 815 | MultiMediaCard. |
| 816 | |
| 817 | config MFD_RT5033 |
| 818 | tristate "Richtek RT5033 Power Management IC" |
| 819 | depends on I2C |
| 820 | select MFD_CORE |
| 821 | select REGMAP_I2C |
| 822 | select REGMAP_IRQ |
| 823 | help |
| 824 | This driver provides for the Richtek RT5033 Power Management IC, |
| 825 | which includes the I2C driver and the Core APIs. This driver provides |
| 826 | common support for accessing the device. The device supports multiple |
| 827 | sub-devices like charger, fuel gauge, flash LED, current source, |
| 828 | LDO and Buck. |
| 829 | |
| 830 | config MFD_RTSX_USB |
| 831 | tristate "Realtek USB card reader" |
| 832 | depends on USB |
| 833 | select MFD_CORE |
| 834 | help |
| 835 | Select this option to get support for Realtek USB 2.0 card readers |
| 836 | including RTS5129, RTS5139, RTS5179 and RTS5170. |
| 837 | Realtek card reader supports access to many types of memory cards, |
| 838 | such as Memory Stick Pro, Secure Digital and MultiMediaCard. |
| 839 | |
| 840 | config MFD_RC5T583 |
| 841 | bool "Ricoh RC5T583 Power Management system device" |
| 842 | depends on I2C=y |
| 843 | select MFD_CORE |
| 844 | select REGMAP_I2C |
| 845 | help |
| 846 | Select this option to get support for the RICOH583 Power |
| 847 | Management system device. |
| 848 | This driver provides common support for accessing the device |
| 849 | through i2c interface. The device supports multiple sub-devices |
| 850 | like GPIO, interrupts, RTC, LDO and DCDC regulators, onkey. |
| 851 | Additional drivers must be enabled in order to use the |
| 852 | different functionality of the device. |
| 853 | |
| 854 | config MFD_RK808 |
| 855 | tristate "Rockchip RK808 Power Management chip" |
| 856 | depends on I2C && OF |
| 857 | select MFD_CORE |
| 858 | select REGMAP_I2C |
| 859 | select REGMAP_IRQ |
| 860 | help |
| 861 | If you say yes here you get support for the RK808 |
| 862 | Power Management chips. |
| 863 | This driver provides common support for accessing the device |
| 864 | through I2C interface. The device supports multiple sub-devices |
| 865 | including interrupts, RTC, LDO & DCDC regulators, and onkey. |
| 866 | |
| 867 | config MFD_RN5T618 |
| 868 | tristate "Ricoh RN5T567/618 PMIC" |
| 869 | depends on I2C |
| 870 | depends on OF |
| 871 | select MFD_CORE |
| 872 | select REGMAP_I2C |
| 873 | help |
| 874 | Say yes here to add support for the Ricoh RN5T567 or R5T618 PMIC. |
| 875 | This driver provides common support for accessing the device, |
| 876 | additional drivers must be enabled in order to use the |
| 877 | functionality of the device. |
| 878 | |
| 879 | config MFD_SEC_CORE |
| 880 | bool "SAMSUNG Electronics PMIC Series Support" |
| 881 | depends on I2C=y |
| 882 | select MFD_CORE |
| 883 | select REGMAP_I2C |
| 884 | select REGMAP_IRQ |
| 885 | help |
| 886 | Support for the Samsung Electronics MFD series. |
| 887 | This driver provides common support for accessing the device, |
| 888 | additional drivers must be enabled in order to use the functionality |
| 889 | of the device |
| 890 | |
| 891 | config MFD_SI476X_CORE |
| 892 | tristate "Silicon Laboratories 4761/64/68 AM/FM radio." |
| 893 | depends on I2C |
| 894 | select MFD_CORE |
| 895 | select REGMAP_I2C |
| 896 | help |
| 897 | This is the core driver for the SI476x series of AM/FM |
| 898 | radio. This MFD driver connects the radio-si476x V4L2 module |
| 899 | and the si476x audio codec. |
| 900 | |
| 901 | To compile this driver as a module, choose M here: the |
| 902 | module will be called si476x-core. |
| 903 | |
| 904 | config MFD_SM501 |
| 905 | tristate "Silicon Motion SM501" |
| 906 | ---help--- |
| 907 | This is the core driver for the Silicon Motion SM501 multimedia |
| 908 | companion chip. This device is a multifunction device which may |
| 909 | provide numerous interfaces including USB host controller, USB gadget, |
| 910 | asynchronous serial ports, audio functions, and a dual display video |
| 911 | interface. The device may be connected by PCI or local bus with |
| 912 | varying functions enabled. |
| 913 | |
| 914 | config MFD_SM501_GPIO |
| 915 | bool "Export GPIO via GPIO layer" |
| 916 | depends on MFD_SM501 && GPIOLIB |
| 917 | ---help--- |
| 918 | This option uses the gpio library layer to export the 64 GPIO |
| 919 | lines on the SM501. The platform data is used to supply the |
| 920 | base number for the first GPIO line to register. |
| 921 | |
| 922 | config MFD_SKY81452 |
| 923 | tristate "Skyworks Solutions SKY81452" |
| 924 | select MFD_CORE |
| 925 | select REGMAP_I2C |
| 926 | depends on I2C |
| 927 | help |
| 928 | This is the core driver for the Skyworks SKY81452 backlight and |
| 929 | voltage regulator device. |
| 930 | |
| 931 | This driver can also be built as a module. If so, the module |
| 932 | will be called sky81452. |
| 933 | |
| 934 | config MFD_SMSC |
| 935 | bool "SMSC ECE1099 series chips" |
| 936 | depends on I2C=y |
| 937 | select MFD_CORE |
| 938 | select REGMAP_I2C |
| 939 | help |
| 940 | If you say yes here you get support for the |
| 941 | ece1099 chips from SMSC. |
| 942 | |
| 943 | To compile this driver as a module, choose M here: the |
| 944 | module will be called smsc. |
| 945 | |
| 946 | config ABX500_CORE |
| 947 | bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions" |
| 948 | default y if ARCH_U300 || ARCH_U8500 |
| 949 | help |
| 950 | Say yes here if you have the ABX500 Mixed Signal IC family |
| 951 | chips. This core driver expose register access functions. |
| 952 | Functionality specific drivers using these functions can |
| 953 | remain unchanged when IC changes. Binding of the functions to |
| 954 | actual register access is done by the IC core driver. |
| 955 | |
| 956 | config AB3100_CORE |
| 957 | bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions" |
| 958 | depends on I2C=y && ABX500_CORE |
| 959 | select MFD_CORE |
| 960 | default y if ARCH_U300 |
| 961 | help |
| 962 | Select this to enable the AB3100 Mixed Signal IC core |
| 963 | functionality. This connects to a AB3100 on the I2C bus |
| 964 | and expose a number of symbols needed for dependent devices |
| 965 | to read and write registers and subscribe to events from |
| 966 | this multi-functional IC. This is needed to use other features |
| 967 | of the AB3100 such as battery-backed RTC, charging control, |
| 968 | LEDs, vibrator, system power and temperature, power management |
| 969 | and ALSA sound. |
| 970 | |
| 971 | config AB3100_OTP |
| 972 | tristate "ST-Ericsson AB3100 OTP functions" |
| 973 | depends on AB3100_CORE |
| 974 | default y if AB3100_CORE |
| 975 | help |
| 976 | Select this to enable the AB3100 Mixed Signal IC OTP (one-time |
| 977 | programmable memory) support. This exposes a sysfs file to read |
| 978 | out OTP values. |
| 979 | |
| 980 | config AB8500_CORE |
| 981 | bool "ST-Ericsson AB8500 Mixed Signal Power Management chip" |
| 982 | depends on ABX500_CORE && MFD_DB8500_PRCMU |
| 983 | select POWER_SUPPLY |
| 984 | select MFD_CORE |
| 985 | select IRQ_DOMAIN |
| 986 | help |
| 987 | Select this option to enable access to AB8500 power management |
| 988 | chip. This connects to U8500 either on the SSP/SPI bus (deprecated |
| 989 | since hardware version v1.0) or the I2C bus via PRCMU. It also adds |
| 990 | the irq_chip parts for handling the Mixed Signal chip events. |
| 991 | This chip embeds various other multimedia funtionalities as well. |
| 992 | |
| 993 | config AB8500_DEBUG |
| 994 | bool "Enable debug info via debugfs" |
| 995 | depends on AB8500_GPADC && DEBUG_FS |
| 996 | default y if DEBUG_FS |
| 997 | help |
| 998 | Select this option if you want debug information using the debug |
| 999 | filesystem, debugfs. |
| 1000 | |
| 1001 | config AB8500_GPADC |
| 1002 | bool "ST-Ericsson AB8500 GPADC driver" |
| 1003 | depends on AB8500_CORE && REGULATOR_AB8500 |
| 1004 | default y |
| 1005 | help |
| 1006 | AB8500 GPADC driver used to convert Acc and battery/ac/usb voltage |
| 1007 | |
| 1008 | config MFD_DB8500_PRCMU |
| 1009 | bool "ST-Ericsson DB8500 Power Reset Control Management Unit" |
| 1010 | depends on UX500_SOC_DB8500 |
| 1011 | select MFD_CORE |
| 1012 | help |
| 1013 | Select this option to enable support for the DB8500 Power Reset |
| 1014 | and Control Management Unit. This is basically an autonomous |
| 1015 | system controller running an XP70 microprocessor, which is accessed |
| 1016 | through a register map. |
| 1017 | |
| 1018 | config MFD_STMPE |
| 1019 | bool "STMicroelectronics STMPE" |
| 1020 | depends on (I2C=y || SPI_MASTER=y) |
| 1021 | depends on OF |
| 1022 | select MFD_CORE |
| 1023 | help |
| 1024 | Support for the STMPE family of I/O Expanders from |
| 1025 | STMicroelectronics. |
| 1026 | |
| 1027 | Currently supported devices are: |
| 1028 | |
| 1029 | STMPE811: GPIO, Touchscreen |
| 1030 | STMPE1601: GPIO, Keypad |
| 1031 | STMPE1801: GPIO, Keypad |
| 1032 | STMPE2401: GPIO, Keypad |
| 1033 | STMPE2403: GPIO, Keypad |
| 1034 | |
| 1035 | This driver provides common support for accessing the device, |
| 1036 | additional drivers must be enabled in order to use the functionality |
| 1037 | of the device. Currently available sub drivers are: |
| 1038 | |
| 1039 | GPIO: stmpe-gpio |
| 1040 | Keypad: stmpe-keypad |
| 1041 | Touchscreen: stmpe-ts |
| 1042 | |
| 1043 | menu "STMicroelectronics STMPE Interface Drivers" |
| 1044 | depends on MFD_STMPE |
| 1045 | |
| 1046 | config STMPE_I2C |
| 1047 | bool "STMicroelectronics STMPE I2C Interface" |
| 1048 | depends on I2C=y |
| 1049 | default y |
| 1050 | help |
| 1051 | This is used to enable I2C interface of STMPE |
| 1052 | |
| 1053 | config STMPE_SPI |
| 1054 | bool "STMicroelectronics STMPE SPI Interface" |
| 1055 | depends on SPI_MASTER |
| 1056 | help |
| 1057 | This is used to enable SPI interface of STMPE |
| 1058 | endmenu |
| 1059 | |
| 1060 | config MFD_STA2X11 |
| 1061 | bool "STMicroelectronics STA2X11" |
| 1062 | depends on STA2X11 |
| 1063 | select MFD_CORE |
| 1064 | select REGMAP_MMIO |
| 1065 | |
| 1066 | config MFD_SUN6I_PRCM |
| 1067 | bool "Allwinner A31 PRCM controller" |
| 1068 | depends on ARCH_SUNXI |
| 1069 | select MFD_CORE |
| 1070 | help |
| 1071 | Support for the PRCM (Power/Reset/Clock Management) unit available |
| 1072 | in A31 SoC. |
| 1073 | |
| 1074 | config MFD_SYSCON |
| 1075 | bool "System Controller Register R/W Based on Regmap" |
| 1076 | select REGMAP_MMIO |
| 1077 | help |
| 1078 | Select this option to enable accessing system control registers |
| 1079 | via regmap. |
| 1080 | |
| 1081 | config MFD_DAVINCI_VOICECODEC |
| 1082 | tristate |
| 1083 | select MFD_CORE |
| 1084 | select REGMAP_MMIO |
| 1085 | |
| 1086 | config MFD_TI_AM335X_TSCADC |
| 1087 | tristate "TI ADC / Touch Screen chip support" |
| 1088 | select MFD_CORE |
| 1089 | select REGMAP |
| 1090 | select REGMAP_MMIO |
| 1091 | help |
| 1092 | If you say yes here you get support for Texas Instruments series |
| 1093 | of Touch Screen /ADC chips. |
| 1094 | To compile this driver as a module, choose M here: the |
| 1095 | module will be called ti_am335x_tscadc. |
| 1096 | |
| 1097 | config MFD_DM355EVM_MSP |
| 1098 | bool "TI DaVinci DM355 EVM microcontroller" |
| 1099 | depends on I2C=y && MACH_DAVINCI_DM355_EVM |
| 1100 | help |
| 1101 | This driver supports the MSP430 microcontroller used on these |
| 1102 | boards. MSP430 firmware manages resets and power sequencing, |
| 1103 | inputs from buttons and the IR remote, LEDs, an RTC, and more. |
| 1104 | |
| 1105 | config MFD_LP3943 |
| 1106 | tristate "TI/National Semiconductor LP3943 MFD Driver" |
| 1107 | depends on I2C |
| 1108 | select MFD_CORE |
| 1109 | select REGMAP_I2C |
| 1110 | help |
| 1111 | Support for the TI/National Semiconductor LP3943. |
| 1112 | This driver consists of GPIO and PWM drivers. |
| 1113 | With these functionalities, it can be used for LED string control or |
| 1114 | general usage such like a GPIO controller and a PWM controller. |
| 1115 | |
| 1116 | config MFD_LP8788 |
| 1117 | bool "TI LP8788 Power Management Unit Driver" |
| 1118 | depends on I2C=y |
| 1119 | select MFD_CORE |
| 1120 | select REGMAP_I2C |
| 1121 | select IRQ_DOMAIN |
| 1122 | help |
| 1123 | TI LP8788 PMU supports regulators, battery charger, RTC, |
| 1124 | ADC, backlight driver and current sinks. |
| 1125 | |
| 1126 | config MFD_OMAP_USB_HOST |
| 1127 | bool "TI OMAP USBHS core and TLL driver" |
| 1128 | depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3 |
| 1129 | default y |
| 1130 | help |
| 1131 | This is the core driver for the OAMP EHCI and OHCI drivers. |
| 1132 | This MFD driver does the required setup functionalities for |
| 1133 | OMAP USB Host drivers. |
| 1134 | |
| 1135 | config MFD_PALMAS |
| 1136 | bool "TI Palmas series chips" |
| 1137 | select MFD_CORE |
| 1138 | select REGMAP_I2C |
| 1139 | select REGMAP_IRQ |
| 1140 | depends on I2C=y |
| 1141 | help |
| 1142 | If you say yes here you get support for the Palmas |
| 1143 | series of PMIC chips from Texas Instruments. |
| 1144 | |
| 1145 | config TPS6105X |
| 1146 | tristate "TI TPS61050/61052 Boost Converters" |
| 1147 | depends on I2C |
| 1148 | select REGMAP_I2C |
| 1149 | select REGULATOR |
| 1150 | select MFD_CORE |
| 1151 | select REGULATOR_FIXED_VOLTAGE |
| 1152 | help |
| 1153 | This option enables a driver for the TP61050/TPS61052 |
| 1154 | high-power "white LED driver". This boost converter is |
| 1155 | sometimes used for other things than white LEDs, and |
| 1156 | also contains a GPIO pin. |
| 1157 | |
| 1158 | config TPS65010 |
| 1159 | tristate "TI TPS6501x Power Management chips" |
| 1160 | depends on I2C && GPIOLIB |
| 1161 | default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK |
| 1162 | help |
| 1163 | If you say yes here you get support for the TPS6501x series of |
| 1164 | Power Management chips. These include voltage regulators, |
| 1165 | lithium ion/polymer battery charging, and other features that |
| 1166 | are often used in portable devices like cell phones and cameras. |
| 1167 | |
| 1168 | This driver can also be built as a module. If so, the module |
| 1169 | will be called tps65010. |
| 1170 | |
| 1171 | config TPS6507X |
| 1172 | tristate "TI TPS6507x Power Management / Touch Screen chips" |
| 1173 | select MFD_CORE |
| 1174 | depends on I2C |
| 1175 | help |
| 1176 | If you say yes here you get support for the TPS6507x series of |
| 1177 | Power Management / Touch Screen chips. These include voltage |
| 1178 | regulators, lithium ion/polymer battery charging, touch screen |
| 1179 | and other features that are often used in portable devices. |
| 1180 | This driver can also be built as a module. If so, the module |
| 1181 | will be called tps6507x. |
| 1182 | |
| 1183 | config MFD_TPS65086 |
| 1184 | tristate "TI TPS65086 Power Management Integrated Chips (PMICs)" |
| 1185 | select REGMAP |
| 1186 | select REGMAP_IRQ |
| 1187 | select REGMAP_I2C |
| 1188 | depends on I2C |
| 1189 | help |
| 1190 | If you say yes here you get support for the TPS65086 series of |
| 1191 | Power Management chips. |
| 1192 | This driver provides common support for accessing the device, |
| 1193 | additional drivers must be enabled in order to use the |
| 1194 | functionality of the device. |
| 1195 | |
| 1196 | config TPS65911_COMPARATOR |
| 1197 | tristate |
| 1198 | |
| 1199 | config MFD_TPS65090 |
| 1200 | bool "TI TPS65090 Power Management chips" |
| 1201 | depends on I2C=y |
| 1202 | select MFD_CORE |
| 1203 | select REGMAP_I2C |
| 1204 | select REGMAP_IRQ |
| 1205 | help |
| 1206 | If you say yes here you get support for the TPS65090 series of |
| 1207 | Power Management chips. |
| 1208 | This driver provides common support for accessing the device, |
| 1209 | additional drivers must be enabled in order to use the |
| 1210 | functionality of the device. |
| 1211 | |
| 1212 | config MFD_TPS65217 |
| 1213 | tristate "TI TPS65217 Power Management / White LED chips" |
| 1214 | depends on I2C |
| 1215 | select MFD_CORE |
| 1216 | select REGMAP_I2C |
| 1217 | help |
| 1218 | If you say yes here you get support for the TPS65217 series of |
| 1219 | Power Management / White LED chips. |
| 1220 | These include voltage regulators, lithium ion/polymer battery |
| 1221 | charger, wled and other features that are often used in portable |
| 1222 | devices. |
| 1223 | |
| 1224 | This driver can also be built as a module. If so, the module |
| 1225 | will be called tps65217. |
| 1226 | |
| 1227 | config MFD_TPS65218 |
| 1228 | tristate "TI TPS65218 Power Management chips" |
| 1229 | depends on I2C |
| 1230 | select MFD_CORE |
| 1231 | select REGMAP_I2C |
| 1232 | select REGMAP_IRQ |
| 1233 | help |
| 1234 | If you say yes here you get support for the TPS65218 series of |
| 1235 | Power Management chips. |
| 1236 | These include voltage regulators, gpio and other features |
| 1237 | that are often used in portable devices. Only regulator |
| 1238 | component is currently supported. |
| 1239 | |
| 1240 | This driver can also be built as a module. If so, the module |
| 1241 | will be called tps65218. |
| 1242 | |
| 1243 | config MFD_TPS6586X |
| 1244 | bool "TI TPS6586x Power Management chips" |
| 1245 | depends on I2C=y |
| 1246 | select MFD_CORE |
| 1247 | select REGMAP_I2C |
| 1248 | help |
| 1249 | If you say yes here you get support for the TPS6586X series of |
| 1250 | Power Management chips. |
| 1251 | This driver provides common support for accessing the device, |
| 1252 | additional drivers must be enabled in order to use the |
| 1253 | functionality of the device. |
| 1254 | |
| 1255 | This driver can also be built as a module. If so, the module |
| 1256 | will be called tps6586x. |
| 1257 | |
| 1258 | config MFD_TPS65910 |
| 1259 | bool "TI TPS65910 Power Management chip" |
| 1260 | depends on I2C=y |
| 1261 | depends on GPIOLIB || COMPILE_TEST |
| 1262 | select MFD_CORE |
| 1263 | select REGMAP_I2C |
| 1264 | select REGMAP_IRQ |
| 1265 | select IRQ_DOMAIN |
| 1266 | help |
| 1267 | if you say yes here you get support for the TPS65910 series of |
| 1268 | Power Management chips. |
| 1269 | |
| 1270 | config MFD_TPS65912 |
| 1271 | tristate |
| 1272 | select MFD_CORE |
| 1273 | select REGMAP |
| 1274 | select REGMAP_IRQ |
| 1275 | |
| 1276 | config MFD_TPS65912_I2C |
| 1277 | tristate "TI TPS65912 Power Management chip with I2C" |
| 1278 | select MFD_TPS65912 |
| 1279 | select REGMAP_I2C |
| 1280 | depends on I2C |
| 1281 | help |
| 1282 | If you say yes here you get support for the TPS65912 series of |
| 1283 | PM chips with I2C interface. |
| 1284 | |
| 1285 | config MFD_TPS65912_SPI |
| 1286 | tristate "TI TPS65912 Power Management chip with SPI" |
| 1287 | select MFD_TPS65912 |
| 1288 | select REGMAP_SPI |
| 1289 | depends on SPI_MASTER |
| 1290 | help |
| 1291 | If you say yes here you get support for the TPS65912 series of |
| 1292 | PM chips with SPI interface. |
| 1293 | |
| 1294 | config MFD_TPS80031 |
| 1295 | bool "TI TPS80031/TPS80032 Power Management chips" |
| 1296 | depends on I2C=y |
| 1297 | select MFD_CORE |
| 1298 | select REGMAP_I2C |
| 1299 | select REGMAP_IRQ |
| 1300 | help |
| 1301 | If you say yes here you get support for the Texas Instruments |
| 1302 | TPS80031/ TPS80032 Fully Integrated Power Management with Power |
| 1303 | Path and Battery Charger. The device provides five configurable |
| 1304 | step-down converters, 11 general purpose LDOs, USB OTG Module, |
| 1305 | ADC, RTC, 2 PWM, System Voltage Regulator/Battery Charger with |
| 1306 | Power Path from USB, 32K clock generator. |
| 1307 | |
| 1308 | config TWL4030_CORE |
| 1309 | bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 Support" |
| 1310 | depends on I2C=y |
| 1311 | select IRQ_DOMAIN |
| 1312 | select REGMAP_I2C |
| 1313 | help |
| 1314 | Say yes here if you have TWL4030 / TWL6030 family chip on your board. |
| 1315 | This core driver provides register access and IRQ handling |
| 1316 | facilities, and registers devices for the various functions |
| 1317 | so that function-specific drivers can bind to them. |
| 1318 | |
| 1319 | These multi-function chips are found on many OMAP2 and OMAP3 |
| 1320 | boards, providing power management, RTC, GPIO, keypad, a |
| 1321 | high speed USB OTG transceiver, an audio codec (on most |
| 1322 | versions) and many other features. |
| 1323 | |
| 1324 | config TWL4030_POWER |
| 1325 | bool "TI TWL4030 power resources" |
| 1326 | depends on TWL4030_CORE && ARM |
| 1327 | help |
| 1328 | Say yes here if you want to use the power resources on the |
| 1329 | TWL4030 family chips. Most of these resources are regulators, |
| 1330 | which have a separate driver; some are control signals, such |
| 1331 | as clock request handshaking. |
| 1332 | |
| 1333 | This driver uses board-specific data to initialize the resources |
| 1334 | and load scripts controlling which resources are switched off/on |
| 1335 | or reset when a sleep, wakeup or warm reset event occurs. |
| 1336 | |
| 1337 | config MFD_TWL4030_AUDIO |
| 1338 | bool "TI TWL4030 Audio" |
| 1339 | depends on TWL4030_CORE |
| 1340 | select MFD_CORE |
| 1341 | default n |
| 1342 | |
| 1343 | config TWL6040_CORE |
| 1344 | bool "TI TWL6040 audio codec" |
| 1345 | depends on I2C=y |
| 1346 | select MFD_CORE |
| 1347 | select REGMAP_I2C |
| 1348 | select REGMAP_IRQ |
| 1349 | default n |
| 1350 | help |
| 1351 | Say yes here if you want support for Texas Instruments TWL6040 audio |
| 1352 | codec. |
| 1353 | This driver provides common support for accessing the device, |
| 1354 | additional drivers must be enabled in order to use the |
| 1355 | functionality of the device (audio, vibra). |
| 1356 | |
| 1357 | config MENELAUS |
| 1358 | bool "TI TWL92330/Menelaus PM chip" |
| 1359 | depends on I2C=y && ARCH_OMAP2 |
| 1360 | help |
| 1361 | If you say yes here you get support for the Texas Instruments |
| 1362 | TWL92330/Menelaus Power Management chip. This include voltage |
| 1363 | regulators, Dual slot memory card transceivers, real-time clock |
| 1364 | and other features that are often used in portable devices like |
| 1365 | cell phones and PDAs. |
| 1366 | |
| 1367 | config MFD_WL1273_CORE |
| 1368 | tristate "TI WL1273 FM radio" |
| 1369 | depends on I2C |
| 1370 | select MFD_CORE |
| 1371 | default n |
| 1372 | help |
| 1373 | This is the core driver for the TI WL1273 FM radio. This MFD |
| 1374 | driver connects the radio-wl1273 V4L2 module and the wl1273 |
| 1375 | audio codec. |
| 1376 | |
| 1377 | config MFD_LM3533 |
| 1378 | tristate "TI/National Semiconductor LM3533 Lighting Power chip" |
| 1379 | depends on I2C |
| 1380 | select MFD_CORE |
| 1381 | select REGMAP_I2C |
| 1382 | help |
| 1383 | Say yes here to enable support for National Semiconductor / TI |
| 1384 | LM3533 Lighting Power chips. |
| 1385 | |
| 1386 | This driver provides common support for accessing the device; |
| 1387 | additional drivers must be enabled in order to use the LED, |
| 1388 | backlight or ambient-light-sensor functionality of the device. |
| 1389 | |
| 1390 | config MFD_TIMBERDALE |
| 1391 | tristate "Timberdale FPGA" |
| 1392 | select MFD_CORE |
| 1393 | depends on PCI && GPIOLIB && (X86_32 || COMPILE_TEST) |
| 1394 | ---help--- |
| 1395 | This is the core driver for the timberdale FPGA. This device is a |
| 1396 | multifunction device which exposes numerous platform devices. |
| 1397 | |
| 1398 | The timberdale FPGA can be found on the Intel Atom development board |
| 1399 | for in-vehicle infontainment, called Russellville. |
| 1400 | |
| 1401 | config MFD_TC3589X |
| 1402 | bool "Toshiba TC35892 and variants" |
| 1403 | depends on I2C=y |
| 1404 | depends on OF |
| 1405 | select MFD_CORE |
| 1406 | help |
| 1407 | Support for the Toshiba TC35892 and variants I/O Expander. |
| 1408 | |
| 1409 | This driver provides common support for accessing the device, |
| 1410 | additional drivers must be enabled in order to use the |
| 1411 | functionality of the device. |
| 1412 | |
| 1413 | config MFD_TMIO |
| 1414 | bool |
| 1415 | default n |
| 1416 | |
| 1417 | config MFD_T7L66XB |
| 1418 | bool "Toshiba T7L66XB" |
| 1419 | depends on ARM && HAVE_CLK |
| 1420 | select MFD_CORE |
| 1421 | select MFD_TMIO |
| 1422 | help |
| 1423 | Support for Toshiba Mobile IO Controller T7L66XB |
| 1424 | |
| 1425 | config MFD_TC6387XB |
| 1426 | bool "Toshiba TC6387XB" |
| 1427 | depends on ARM && HAVE_CLK |
| 1428 | select MFD_CORE |
| 1429 | select MFD_TMIO |
| 1430 | help |
| 1431 | Support for Toshiba Mobile IO Controller TC6387XB |
| 1432 | |
| 1433 | config MFD_TC6393XB |
| 1434 | bool "Toshiba TC6393XB" |
| 1435 | depends on ARM && HAVE_CLK |
| 1436 | select GPIOLIB |
| 1437 | select MFD_CORE |
| 1438 | select MFD_TMIO |
| 1439 | help |
| 1440 | Support for Toshiba Mobile IO Controller TC6393XB |
| 1441 | |
| 1442 | config MFD_VX855 |
| 1443 | tristate "VIA VX855/VX875 integrated south bridge" |
| 1444 | depends on PCI |
| 1445 | select MFD_CORE |
| 1446 | help |
| 1447 | Say yes here to enable support for various functions of the |
| 1448 | VIA VX855/VX875 south bridge. You will need to enable the vx855_spi |
| 1449 | and/or vx855_gpio drivers for this to do anything useful. |
| 1450 | |
| 1451 | config MFD_ARIZONA |
| 1452 | select REGMAP |
| 1453 | select REGMAP_IRQ |
| 1454 | select MFD_CORE |
| 1455 | bool |
| 1456 | |
| 1457 | config MFD_ARIZONA_I2C |
| 1458 | tristate "Cirrus Logic/Wolfson Microelectronics Arizona platform with I2C" |
| 1459 | select MFD_ARIZONA |
| 1460 | select REGMAP_I2C |
| 1461 | depends on I2C |
| 1462 | help |
| 1463 | Support for the Cirrus Logic/Wolfson Microelectronics Arizona platform |
| 1464 | audio SoC core functionality controlled via I2C. |
| 1465 | |
| 1466 | config MFD_ARIZONA_SPI |
| 1467 | tristate "Cirrus Logic/Wolfson Microelectronics Arizona platform with SPI" |
| 1468 | select MFD_ARIZONA |
| 1469 | select REGMAP_SPI |
| 1470 | depends on SPI_MASTER |
| 1471 | help |
| 1472 | Support for the Cirrus Logic/Wolfson Microelectronics Arizona platform |
| 1473 | audio SoC core functionality controlled via SPI. |
| 1474 | |
| 1475 | config MFD_CS47L24 |
| 1476 | bool "Cirrus Logic CS47L24 and WM1831" |
| 1477 | depends on MFD_ARIZONA |
| 1478 | help |
| 1479 | Support for Cirrus Logic CS47L24 and WM1831 low power audio SoC |
| 1480 | |
| 1481 | config MFD_WM5102 |
| 1482 | bool "Wolfson Microelectronics WM5102" |
| 1483 | depends on MFD_ARIZONA |
| 1484 | help |
| 1485 | Support for Wolfson Microelectronics WM5102 low power audio SoC |
| 1486 | |
| 1487 | config MFD_WM5110 |
| 1488 | bool "Wolfson Microelectronics WM5110 and WM8280/WM8281" |
| 1489 | depends on MFD_ARIZONA |
| 1490 | help |
| 1491 | Support for Wolfson Microelectronics WM5110 and WM8280/WM8281 |
| 1492 | low power audio SoC |
| 1493 | |
| 1494 | config MFD_WM8997 |
| 1495 | bool "Wolfson Microelectronics WM8997" |
| 1496 | depends on MFD_ARIZONA |
| 1497 | help |
| 1498 | Support for Wolfson Microelectronics WM8997 low power audio SoC |
| 1499 | |
| 1500 | config MFD_WM8998 |
| 1501 | bool "Wolfson Microelectronics WM8998" |
| 1502 | depends on MFD_ARIZONA |
| 1503 | help |
| 1504 | Support for Wolfson Microelectronics WM8998 low power audio SoC |
| 1505 | |
| 1506 | config MFD_WM8400 |
| 1507 | bool "Wolfson Microelectronics WM8400" |
| 1508 | select MFD_CORE |
| 1509 | depends on I2C=y |
| 1510 | select REGMAP_I2C |
| 1511 | help |
| 1512 | Support for the Wolfson Microelecronics WM8400 PMIC and audio |
| 1513 | CODEC. This driver provides common support for accessing |
| 1514 | the device, additional drivers must be enabled in order to use |
| 1515 | the functionality of the device. |
| 1516 | |
| 1517 | config MFD_WM831X |
| 1518 | bool |
| 1519 | |
| 1520 | config MFD_WM831X_I2C |
| 1521 | bool "Wolfson Microelectronics WM831x/2x PMICs with I2C" |
| 1522 | select MFD_CORE |
| 1523 | select MFD_WM831X |
| 1524 | select REGMAP_I2C |
| 1525 | select IRQ_DOMAIN |
| 1526 | depends on I2C=y |
| 1527 | help |
| 1528 | Support for the Wolfson Microelecronics WM831x and WM832x PMICs |
| 1529 | when controlled using I2C. This driver provides common support |
| 1530 | for accessing the device, additional drivers must be enabled in |
| 1531 | order to use the functionality of the device. |
| 1532 | |
| 1533 | config MFD_WM831X_SPI |
| 1534 | bool "Wolfson Microelectronics WM831x/2x PMICs with SPI" |
| 1535 | select MFD_CORE |
| 1536 | select MFD_WM831X |
| 1537 | select REGMAP_SPI |
| 1538 | select IRQ_DOMAIN |
| 1539 | depends on SPI_MASTER |
| 1540 | help |
| 1541 | Support for the Wolfson Microelecronics WM831x and WM832x PMICs |
| 1542 | when controlled using SPI. This driver provides common support |
| 1543 | for accessing the device, additional drivers must be enabled in |
| 1544 | order to use the functionality of the device. |
| 1545 | |
| 1546 | config MFD_WM8350 |
| 1547 | bool |
| 1548 | |
| 1549 | config MFD_WM8350_I2C |
| 1550 | bool "Wolfson Microelectronics WM8350 with I2C" |
| 1551 | select MFD_WM8350 |
| 1552 | depends on I2C=y |
| 1553 | help |
| 1554 | The WM8350 is an integrated audio and power management |
| 1555 | subsystem with watchdog and RTC functionality for embedded |
| 1556 | systems. This option enables core support for the WM8350 with |
| 1557 | I2C as the control interface. Additional options must be |
| 1558 | selected to enable support for the functionality of the chip. |
| 1559 | |
| 1560 | config MFD_WM8994 |
| 1561 | tristate "Wolfson Microelectronics WM8994" |
| 1562 | select MFD_CORE |
| 1563 | select REGMAP_I2C |
| 1564 | select REGMAP_IRQ |
| 1565 | depends on I2C |
| 1566 | help |
| 1567 | The WM8994 is a highly integrated hi-fi CODEC designed for |
| 1568 | smartphone applications. As well as audio functionality it |
| 1569 | has on board GPIO and regulator functionality which is |
| 1570 | supported via the relevant subsystems. This driver provides |
| 1571 | core support for the WM8994, in order to use the actual |
| 1572 | functionaltiy of the device other drivers must be enabled. |
| 1573 | |
| 1574 | config MFD_STW481X |
| 1575 | tristate "Support for ST Microelectronics STw481x" |
| 1576 | depends on I2C && (ARCH_NOMADIK || COMPILE_TEST) |
| 1577 | select REGMAP_I2C |
| 1578 | select MFD_CORE |
| 1579 | help |
| 1580 | Select this option to enable the STw481x chip driver used |
| 1581 | in various ST Microelectronics and ST-Ericsson embedded |
| 1582 | Nomadik series. |
| 1583 | |
| 1584 | menu "Multimedia Capabilities Port drivers" |
| 1585 | depends on ARCH_SA1100 |
| 1586 | |
| 1587 | config MCP |
| 1588 | tristate |
| 1589 | |
| 1590 | # Interface drivers |
| 1591 | config MCP_SA11X0 |
| 1592 | tristate "Support SA11x0 MCP interface" |
| 1593 | depends on ARCH_SA1100 |
| 1594 | select MCP |
| 1595 | |
| 1596 | # Chip drivers |
| 1597 | config MCP_UCB1200 |
| 1598 | tristate "Support for UCB1200 / UCB1300" |
| 1599 | depends on MCP_SA11X0 |
| 1600 | select MCP |
| 1601 | |
| 1602 | config MCP_UCB1200_TS |
| 1603 | tristate "Touchscreen interface support" |
| 1604 | depends on MCP_UCB1200 && INPUT |
| 1605 | |
| 1606 | endmenu |
| 1607 | |
| 1608 | config MFD_VEXPRESS_SYSREG |
| 1609 | bool "Versatile Express System Registers" |
| 1610 | depends on VEXPRESS_CONFIG && GPIOLIB && !ARCH_USES_GETTIMEOFFSET |
| 1611 | default y |
| 1612 | select CLKSRC_MMIO |
| 1613 | select GPIO_GENERIC_PLATFORM |
| 1614 | select MFD_CORE |
| 1615 | select MFD_SYSCON |
| 1616 | help |
| 1617 | System Registers are the platform configuration block |
| 1618 | on the ARM Ltd. Versatile Express board. |
| 1619 | |
| 1620 | endmenu |
| 1621 | endif |