| 1 | # |
| 2 | # Multifunction miscellaneous devices |
| 3 | # |
| 4 | |
| 5 | menu "Multifunction device drivers" |
| 6 | depends on HAS_IOMEM |
| 7 | |
| 8 | config MFD_CORE |
| 9 | tristate |
| 10 | default n |
| 11 | |
| 12 | config MFD_88PM860X |
| 13 | bool "Support Marvell 88PM8606/88PM8607" |
| 14 | depends on I2C=y && GENERIC_HARDIRQS |
| 15 | select MFD_CORE |
| 16 | help |
| 17 | This supports for Marvell 88PM8606/88PM8607 Power Management IC. |
| 18 | This includes the I2C driver and the core APIs _only_, you have to |
| 19 | select individual components like voltage regulators, RTC and |
| 20 | battery-charger under the corresponding menus. |
| 21 | |
| 22 | config MFD_SM501 |
| 23 | tristate "Support for Silicon Motion SM501" |
| 24 | ---help--- |
| 25 | This is the core driver for the Silicon Motion SM501 multimedia |
| 26 | companion chip. This device is a multifunction device which may |
| 27 | provide numerous interfaces including USB host controller, USB gadget, |
| 28 | asynchronous serial ports, audio functions, and a dual display video |
| 29 | interface. The device may be connected by PCI or local bus with |
| 30 | varying functions enabled. |
| 31 | |
| 32 | config MFD_SM501_GPIO |
| 33 | bool "Export GPIO via GPIO layer" |
| 34 | depends on MFD_SM501 && GPIOLIB |
| 35 | ---help--- |
| 36 | This option uses the gpio library layer to export the 64 GPIO |
| 37 | lines on the SM501. The platform data is used to supply the |
| 38 | base number for the first GPIO line to register. |
| 39 | |
| 40 | config MFD_ASIC3 |
| 41 | bool "Support for Compaq ASIC3" |
| 42 | depends on GENERIC_HARDIRQS && GPIOLIB && ARM |
| 43 | select MFD_CORE |
| 44 | ---help--- |
| 45 | This driver supports the ASIC3 multifunction chip found on many |
| 46 | PDAs (mainly iPAQ and HTC based ones) |
| 47 | |
| 48 | config MFD_SH_MOBILE_SDHI |
| 49 | bool "Support for SuperH Mobile SDHI" |
| 50 | depends on SUPERH || ARCH_SHMOBILE |
| 51 | select MFD_CORE |
| 52 | select TMIO_MMC_DMA |
| 53 | ---help--- |
| 54 | This driver supports the SDHI hardware block found in many |
| 55 | SuperH Mobile SoCs. |
| 56 | |
| 57 | config MFD_DAVINCI_VOICECODEC |
| 58 | tristate |
| 59 | select MFD_CORE |
| 60 | |
| 61 | config MFD_DM355EVM_MSP |
| 62 | bool "DaVinci DM355 EVM microcontroller" |
| 63 | depends on I2C && MACH_DAVINCI_DM355_EVM |
| 64 | help |
| 65 | This driver supports the MSP430 microcontroller used on these |
| 66 | boards. MSP430 firmware manages resets and power sequencing, |
| 67 | inputs from buttons and the IR remote, LEDs, an RTC, and more. |
| 68 | |
| 69 | config HTC_EGPIO |
| 70 | bool "HTC EGPIO support" |
| 71 | depends on GENERIC_HARDIRQS && GPIOLIB && ARM |
| 72 | help |
| 73 | This driver supports the CPLD egpio chip present on |
| 74 | several HTC phones. It provides basic support for input |
| 75 | pins, output pins, and irqs. |
| 76 | |
| 77 | config HTC_PASIC3 |
| 78 | tristate "HTC PASIC3 LED/DS1WM chip support" |
| 79 | select MFD_CORE |
| 80 | help |
| 81 | This core driver provides register access for the LED/DS1WM |
| 82 | chips labeled "AIC2" and "AIC3", found on HTC Blueangel and |
| 83 | HTC Magician devices, respectively. Actual functionality is |
| 84 | handled by the leds-pasic3 and ds1wm drivers. |
| 85 | |
| 86 | config HTC_I2CPLD |
| 87 | bool "HTC I2C PLD chip support" |
| 88 | depends on I2C=y && GPIOLIB |
| 89 | help |
| 90 | If you say yes here you get support for the supposed CPLD |
| 91 | found on omap850 HTC devices like the HTC Wizard and HTC Herald. |
| 92 | This device provides input and output GPIOs through an I2C |
| 93 | interface to one or more sub-chips. |
| 94 | |
| 95 | config UCB1400_CORE |
| 96 | tristate "Philips UCB1400 Core driver" |
| 97 | depends on AC97_BUS |
| 98 | depends on GPIOLIB |
| 99 | help |
| 100 | This enables support for the Philips UCB1400 core functions. |
| 101 | The UCB1400 is an AC97 audio codec. |
| 102 | |
| 103 | To compile this driver as a module, choose M here: the |
| 104 | module will be called ucb1400_core. |
| 105 | |
| 106 | config TPS65010 |
| 107 | tristate "TPS6501x Power Management chips" |
| 108 | depends on I2C && GPIOLIB |
| 109 | default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK |
| 110 | help |
| 111 | If you say yes here you get support for the TPS6501x series of |
| 112 | Power Management chips. These include voltage regulators, |
| 113 | lithium ion/polymer battery charging, and other features that |
| 114 | are often used in portable devices like cell phones and cameras. |
| 115 | |
| 116 | This driver can also be built as a module. If so, the module |
| 117 | will be called tps65010. |
| 118 | |
| 119 | config MENELAUS |
| 120 | bool "Texas Instruments TWL92330/Menelaus PM chip" |
| 121 | depends on I2C=y && ARCH_OMAP2 |
| 122 | help |
| 123 | If you say yes here you get support for the Texas Instruments |
| 124 | TWL92330/Menelaus Power Management chip. This include voltage |
| 125 | regulators, Dual slot memory card transceivers, real-time clock |
| 126 | and other features that are often used in portable devices like |
| 127 | cell phones and PDAs. |
| 128 | |
| 129 | config TWL4030_CORE |
| 130 | bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support" |
| 131 | depends on I2C=y && GENERIC_HARDIRQS |
| 132 | help |
| 133 | Say yes here if you have TWL4030 / TWL6030 family chip on your board. |
| 134 | This core driver provides register access and IRQ handling |
| 135 | facilities, and registers devices for the various functions |
| 136 | so that function-specific drivers can bind to them. |
| 137 | |
| 138 | These multi-function chips are found on many OMAP2 and OMAP3 |
| 139 | boards, providing power management, RTC, GPIO, keypad, a |
| 140 | high speed USB OTG transceiver, an audio codec (on most |
| 141 | versions) and many other features. |
| 142 | |
| 143 | config TWL4030_POWER |
| 144 | bool "Support power resources on TWL4030 family chips" |
| 145 | depends on TWL4030_CORE && ARM |
| 146 | help |
| 147 | Say yes here if you want to use the power resources on the |
| 148 | TWL4030 family chips. Most of these resources are regulators, |
| 149 | which have a separate driver; some are control signals, such |
| 150 | as clock request handshaking. |
| 151 | |
| 152 | This driver uses board-specific data to initialize the resources |
| 153 | and load scripts controling which resources are switched off/on |
| 154 | or reset when a sleep, wakeup or warm reset event occurs. |
| 155 | |
| 156 | config TWL4030_CODEC |
| 157 | bool |
| 158 | depends on TWL4030_CORE |
| 159 | select MFD_CORE |
| 160 | default n |
| 161 | |
| 162 | config MFD_TMIO |
| 163 | bool |
| 164 | default n |
| 165 | |
| 166 | config TMIO_MMC_DMA |
| 167 | bool |
| 168 | select DMA_ENGINE |
| 169 | select DMADEVICES |
| 170 | |
| 171 | config MFD_T7L66XB |
| 172 | bool "Support Toshiba T7L66XB" |
| 173 | depends on ARM && HAVE_CLK |
| 174 | select MFD_CORE |
| 175 | select MFD_TMIO |
| 176 | help |
| 177 | Support for Toshiba Mobile IO Controller T7L66XB |
| 178 | |
| 179 | config MFD_TC6387XB |
| 180 | bool "Support Toshiba TC6387XB" |
| 181 | depends on ARM && HAVE_CLK |
| 182 | select MFD_CORE |
| 183 | select MFD_TMIO |
| 184 | help |
| 185 | Support for Toshiba Mobile IO Controller TC6387XB |
| 186 | |
| 187 | config MFD_TC6393XB |
| 188 | bool "Support Toshiba TC6393XB" |
| 189 | depends on GPIOLIB && ARM |
| 190 | select MFD_CORE |
| 191 | select MFD_TMIO |
| 192 | help |
| 193 | Support for Toshiba Mobile IO Controller TC6393XB |
| 194 | |
| 195 | config PMIC_DA903X |
| 196 | bool "Dialog Semiconductor DA9030/DA9034 PMIC Support" |
| 197 | depends on I2C=y |
| 198 | help |
| 199 | Say yes here to support for Dialog Semiconductor DA9030 (a.k.a |
| 200 | ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC |
| 201 | usually found on PXA processors-based platforms. This includes |
| 202 | the I2C driver and the core APIs _only_, you have to select |
| 203 | individual components like LCD backlight, voltage regulators, |
| 204 | LEDs and battery-charger under the corresponding menus. |
| 205 | |
| 206 | config PMIC_ADP5520 |
| 207 | bool "Analog Devices ADP5520/01 MFD PMIC Core Support" |
| 208 | depends on I2C=y |
| 209 | help |
| 210 | Say yes here to add support for Analog Devices AD5520 and ADP5501, |
| 211 | Multifunction Power Management IC. This includes |
| 212 | the I2C driver and the core APIs _only_, you have to select |
| 213 | individual components like LCD backlight, LEDs, GPIOs and Kepad |
| 214 | under the corresponding menus. |
| 215 | |
| 216 | config MFD_MAX8925 |
| 217 | bool "Maxim Semiconductor MAX8925 PMIC Support" |
| 218 | depends on I2C=y && GENERIC_HARDIRQS |
| 219 | select MFD_CORE |
| 220 | help |
| 221 | Say yes here to support for Maxim Semiconductor MAX8925. This is |
| 222 | a Power Management IC. This driver provies common support for |
| 223 | accessing the device, additional drivers must be enabled in order |
| 224 | to use the functionality of the device. |
| 225 | |
| 226 | config MFD_WM8400 |
| 227 | tristate "Support Wolfson Microelectronics WM8400" |
| 228 | select MFD_CORE |
| 229 | depends on I2C |
| 230 | help |
| 231 | Support for the Wolfson Microelecronics WM8400 PMIC and audio |
| 232 | CODEC. This driver provides common support for accessing |
| 233 | the device, additional drivers must be enabled in order to use |
| 234 | the functionality of the device. |
| 235 | |
| 236 | config MFD_WM831X |
| 237 | bool "Support Wolfson Microelectronics WM831x/2x PMICs" |
| 238 | select MFD_CORE |
| 239 | depends on I2C=y && GENERIC_HARDIRQS |
| 240 | help |
| 241 | Support for the Wolfson Microelecronics WM831x and WM832x PMICs. |
| 242 | This driver provides common support for accessing the device, |
| 243 | additional drivers must be enabled in order to use the |
| 244 | functionality of the device. |
| 245 | |
| 246 | config MFD_WM8350 |
| 247 | bool |
| 248 | depends on GENERIC_HARDIRQS |
| 249 | |
| 250 | config MFD_WM8350_CONFIG_MODE_0 |
| 251 | bool |
| 252 | depends on MFD_WM8350 |
| 253 | |
| 254 | config MFD_WM8350_CONFIG_MODE_1 |
| 255 | bool |
| 256 | depends on MFD_WM8350 |
| 257 | |
| 258 | config MFD_WM8350_CONFIG_MODE_2 |
| 259 | bool |
| 260 | depends on MFD_WM8350 |
| 261 | |
| 262 | config MFD_WM8350_CONFIG_MODE_3 |
| 263 | bool |
| 264 | depends on MFD_WM8350 |
| 265 | |
| 266 | config MFD_WM8351_CONFIG_MODE_0 |
| 267 | bool |
| 268 | depends on MFD_WM8350 |
| 269 | |
| 270 | config MFD_WM8351_CONFIG_MODE_1 |
| 271 | bool |
| 272 | depends on MFD_WM8350 |
| 273 | |
| 274 | config MFD_WM8351_CONFIG_MODE_2 |
| 275 | bool |
| 276 | depends on MFD_WM8350 |
| 277 | |
| 278 | config MFD_WM8351_CONFIG_MODE_3 |
| 279 | bool |
| 280 | depends on MFD_WM8350 |
| 281 | |
| 282 | config MFD_WM8352_CONFIG_MODE_0 |
| 283 | bool |
| 284 | depends on MFD_WM8350 |
| 285 | |
| 286 | config MFD_WM8352_CONFIG_MODE_1 |
| 287 | bool |
| 288 | depends on MFD_WM8350 |
| 289 | |
| 290 | config MFD_WM8352_CONFIG_MODE_2 |
| 291 | bool |
| 292 | depends on MFD_WM8350 |
| 293 | |
| 294 | config MFD_WM8352_CONFIG_MODE_3 |
| 295 | bool |
| 296 | depends on MFD_WM8350 |
| 297 | |
| 298 | config MFD_WM8350_I2C |
| 299 | bool "Support Wolfson Microelectronics WM8350 with I2C" |
| 300 | select MFD_WM8350 |
| 301 | depends on I2C=y && GENERIC_HARDIRQS |
| 302 | help |
| 303 | The WM8350 is an integrated audio and power management |
| 304 | subsystem with watchdog and RTC functionality for embedded |
| 305 | systems. This option enables core support for the WM8350 with |
| 306 | I2C as the control interface. Additional options must be |
| 307 | selected to enable support for the functionality of the chip. |
| 308 | |
| 309 | config MFD_WM8994 |
| 310 | bool "Support Wolfson Microelectronics WM8994" |
| 311 | select MFD_CORE |
| 312 | depends on I2C=y && GENERIC_HARDIRQS |
| 313 | help |
| 314 | The WM8994 is a highly integrated hi-fi CODEC designed for |
| 315 | smartphone applicatiosn. As well as audio functionality it |
| 316 | has on board GPIO and regulator functionality which is |
| 317 | supported via the relevant subsystems. This driver provides |
| 318 | core support for the WM8994, in order to use the actual |
| 319 | functionaltiy of the device other drivers must be enabled. |
| 320 | |
| 321 | config MFD_PCF50633 |
| 322 | tristate "Support for NXP PCF50633" |
| 323 | depends on I2C |
| 324 | help |
| 325 | Say yes here if you have NXP PCF50633 chip on your board. |
| 326 | This core driver provides register access and IRQ handling |
| 327 | facilities, and registers devices for the various functions |
| 328 | so that function-specific drivers can bind to them. |
| 329 | |
| 330 | config MFD_MC13783 |
| 331 | tristate "Support Freescale MC13783" |
| 332 | depends on SPI_MASTER |
| 333 | select MFD_CORE |
| 334 | help |
| 335 | Support for the Freescale (Atlas) MC13783 PMIC and audio CODEC. |
| 336 | This driver provides common support for accessing the device, |
| 337 | additional drivers must be enabled in order to use the |
| 338 | functionality of the device. |
| 339 | |
| 340 | config PCF50633_ADC |
| 341 | tristate "Support for NXP PCF50633 ADC" |
| 342 | depends on MFD_PCF50633 |
| 343 | help |
| 344 | Say yes here if you want to include support for ADC in the |
| 345 | NXP PCF50633 chip. |
| 346 | |
| 347 | config PCF50633_GPIO |
| 348 | tristate "Support for NXP PCF50633 GPIO" |
| 349 | depends on MFD_PCF50633 |
| 350 | help |
| 351 | Say yes here if you want to include support GPIO for pins on |
| 352 | the PCF50633 chip. |
| 353 | |
| 354 | config AB3100_CORE |
| 355 | bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions" |
| 356 | depends on I2C=y |
| 357 | default y if ARCH_U300 |
| 358 | help |
| 359 | Select this to enable the AB3100 Mixed Signal IC core |
| 360 | functionality. This connects to a AB3100 on the I2C bus |
| 361 | and expose a number of symbols needed for dependent devices |
| 362 | to read and write registers and subscribe to events from |
| 363 | this multi-functional IC. This is needed to use other features |
| 364 | of the AB3100 such as battery-backed RTC, charging control, |
| 365 | LEDs, vibrator, system power and temperature, power management |
| 366 | and ALSA sound. |
| 367 | |
| 368 | config AB3100_OTP |
| 369 | tristate "ST-Ericsson AB3100 OTP functions" |
| 370 | depends on AB3100_CORE |
| 371 | default y if AB3100_CORE |
| 372 | help |
| 373 | Select this to enable the AB3100 Mixed Signal IC OTP (one-time |
| 374 | programmable memory) support. This exposes a sysfs file to read |
| 375 | out OTP values. |
| 376 | |
| 377 | config EZX_PCAP |
| 378 | bool "PCAP Support" |
| 379 | depends on GENERIC_HARDIRQS && SPI_MASTER |
| 380 | help |
| 381 | This enables the PCAP ASIC present on EZX Phones. This is |
| 382 | needed for MMC, TouchScreen, Sound, USB, etc.. |
| 383 | |
| 384 | config AB4500_CORE |
| 385 | tristate "ST-Ericsson's AB4500 Mixed Signal Power management chip" |
| 386 | depends on SPI |
| 387 | help |
| 388 | Select this option to enable access to AB4500 power management |
| 389 | chip. This connects to U8500 on the SSP/SPI bus and exports |
| 390 | read/write functions for the devices to get access to this chip. |
| 391 | This chip embeds various other multimedia funtionalities as well. |
| 392 | |
| 393 | config MFD_TIMBERDALE |
| 394 | tristate "Support for the Timberdale FPGA" |
| 395 | select MFD_CORE |
| 396 | depends on PCI && GPIOLIB |
| 397 | ---help--- |
| 398 | This is the core driver for the timberdale FPGA. This device is a |
| 399 | multifunction device which exposes numerous platform devices. |
| 400 | |
| 401 | The timberdale FPGA can be found on the Intel Atom development board |
| 402 | for in-vehicle infontainment, called Russellville. |
| 403 | |
| 404 | config LPC_SCH |
| 405 | tristate "Intel SCH LPC" |
| 406 | depends on PCI |
| 407 | select MFD_CORE |
| 408 | help |
| 409 | LPC bridge function of the Intel SCH provides support for |
| 410 | System Management Bus and General Purpose I/O. |
| 411 | |
| 412 | config MFD_RDC321X |
| 413 | tristate "Support for RDC-R321x southbridge" |
| 414 | select MFD_CORE |
| 415 | depends on PCI |
| 416 | help |
| 417 | Say yes here if you want to have support for the RDC R-321x SoC |
| 418 | southbridge which provides access to GPIOs and Watchdog using the |
| 419 | southbridge PCI device configuration space. |
| 420 | |
| 421 | endmenu |
| 422 | |
| 423 | menu "Multimedia Capabilities Port drivers" |
| 424 | depends on ARCH_SA1100 |
| 425 | |
| 426 | config MCP |
| 427 | tristate |
| 428 | |
| 429 | # Interface drivers |
| 430 | config MCP_SA11X0 |
| 431 | tristate "Support SA11x0 MCP interface" |
| 432 | depends on ARCH_SA1100 |
| 433 | select MCP |
| 434 | |
| 435 | # Chip drivers |
| 436 | config MCP_UCB1200 |
| 437 | tristate "Support for UCB1200 / UCB1300" |
| 438 | depends on MCP |
| 439 | |
| 440 | config MCP_UCB1200_TS |
| 441 | tristate "Touchscreen interface support" |
| 442 | depends on MCP_UCB1200 && INPUT |
| 443 | |
| 444 | endmenu |