[deliverable/linux.git] / drivers / mfd / Kconfig

#
# Multifunction miscellaneous devices
#

menu "Multifunction device drivers"
	depends on HAS_IOMEM

config MFD_CORE
	tristate
	default n

config MFD_SM501
	tristate "Support for Silicon Motion SM501"
	 ---help---
	  This is the core driver for the Silicon Motion SM501 multimedia
	  companion chip. This device is a multifunction device which may
	  provide numerous interfaces including USB host controller, USB gadget,
	  asynchronous serial ports, audio functions, and a dual display video
	  interface. The device may be connected by PCI or local bus with
	  varying functions enabled.

config MFD_SM501_GPIO
	bool "Export GPIO via GPIO layer"
	depends on MFD_SM501 && GPIOLIB
	 ---help---
	 This option uses the gpio library layer to export the 64 GPIO
	 lines on the SM501. The platform data is used to supply the
	 base number for the first GPIO line to register.

config MFD_ASIC3
	bool "Support for Compaq ASIC3"
	depends on GENERIC_HARDIRQS && GPIOLIB && ARM
	select MFD_CORE
	 ---help---
	  This driver supports the ASIC3 multifunction chip found on many
	  PDAs (mainly iPAQ and HTC based ones)

config MFD_SH_MOBILE_SDHI
	bool "Support for SuperH Mobile SDHI"
	depends on SUPERH
	select MFD_CORE
	 ---help---
	  This driver supports the SDHI hardware block found in many
	  SuperH Mobile SoCs.

config MFD_DM355EVM_MSP
	bool "DaVinci DM355 EVM microcontroller"
	depends on I2C && MACH_DAVINCI_DM355_EVM
	help
	  This driver supports the MSP430 microcontroller used on these
	  boards.  MSP430 firmware manages resets and power sequencing,
	  inputs from buttons and the IR remote, LEDs, an RTC, and more.

config HTC_EGPIO
	bool "HTC EGPIO support"
	depends on GENERIC_HARDIRQS && GPIOLIB && ARM
	help
	    This driver supports the CPLD egpio chip present on
	    several HTC phones.  It provides basic support for input
	    pins, output pins, and irqs.

config HTC_PASIC3
	tristate "HTC PASIC3 LED/DS1WM chip support"
	select MFD_CORE
	help
	  This core driver provides register access for the LED/DS1WM
	  chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
	  HTC Magician devices, respectively. Actual functionality is
	  handled by the leds-pasic3 and ds1wm drivers.

config UCB1400_CORE
	tristate "Philips UCB1400 Core driver"
	depends on AC97_BUS
	depends on GPIOLIB
	help
	  This enables support for the Philips UCB1400 core functions.
	  The UCB1400 is an AC97 audio codec.

	  To compile this driver as a module, choose M here: the
	  module will be called ucb1400_core.

config TPS65010
	tristate "TPS6501x Power Management chips"
	depends on I2C && GPIOLIB
	default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
	help
	  If you say yes here you get support for the TPS6501x series of
	  Power Management chips.  These include voltage regulators,
	  lithium ion/polymer battery charging, and other features that
	  are often used in portable devices like cell phones and cameras.

	  This driver can also be built as a module.  If so, the module
	  will be called tps65010.

config MENELAUS
	bool "Texas Instruments TWL92330/Menelaus PM chip"
	depends on I2C=y && ARCH_OMAP24XX
	help
	  If you say yes here you get support for the Texas Instruments
	  TWL92330/Menelaus Power Management chip. This include voltage
	  regulators, Dual slot memory card transceivers, real-time clock
	  and other features that are often used in portable devices like
	  cell phones and PDAs.

config TWL4030_CORE
	bool "Texas Instruments TWL4030/TPS659x0 Support"
	depends on I2C=y && GENERIC_HARDIRQS
	help
	  Say yes here if you have TWL4030 family chip on your board.
	  This core driver provides register access and IRQ handling
	  facilities, and registers devices for the various functions
	  so that function-specific drivers can bind to them.

	  These multi-function chips are found on many OMAP2 and OMAP3
	  boards, providing power management, RTC, GPIO, keypad, a
	  high speed USB OTG transceiver, an audio codec (on most
	  versions) and many other features.

config TWL4030_POWER
	bool "Support power resources on TWL4030 family chips"
	depends on TWL4030_CORE && ARM
	help
	  Say yes here if you want to use the power resources on the
	  TWL4030 family chips.  Most of these resources are regulators,
	  which have a separate driver; some are control signals, such
	  as clock request handshaking.

	  This driver uses board-specific data to initialize the resources
	  and load scripts controling which resources are switched off/on
	  or reset when a sleep, wakeup or warm reset event occurs.

config TWL4030_CODEC
	bool
	depends on TWL4030_CORE
	select MFD_CORE
	default n

config MFD_TMIO
	bool
	default n

config MFD_T7L66XB
	bool "Support Toshiba T7L66XB"
	depends on ARM && HAVE_CLK
	select MFD_CORE
	select MFD_TMIO
	help
	  Support for Toshiba Mobile IO Controller T7L66XB

config MFD_TC6387XB
	bool "Support Toshiba TC6387XB"
	depends on ARM && HAVE_CLK
	select MFD_CORE
	select MFD_TMIO
	help
	  Support for Toshiba Mobile IO Controller TC6387XB

config MFD_TC6393XB
	bool "Support Toshiba TC6393XB"
	depends on GPIOLIB && ARM
	select MFD_CORE
	select MFD_TMIO
	help
	  Support for Toshiba Mobile IO Controller TC6393XB

config PMIC_DA903X
	bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
	depends on I2C=y
	help
	  Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
	  ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
	  usually found on PXA processors-based platforms. This includes
	  the I2C driver and the core APIs _only_, you have to select
	  individual components like LCD backlight, voltage regulators,
	  LEDs and battery-charger under the corresponding menus.

config MFD_WM8400
	tristate "Support Wolfson Microelectronics WM8400"
	select MFD_CORE
	depends on I2C
	help
	  Support for the Wolfson Microelecronics WM8400 PMIC and audio
	  CODEC.  This driver provides common support for accessing
	  the device, additional drivers must be enabled in order to use
	  the functionality of the device.

config MFD_WM831X
	tristate "Support Wolfson Microelectronics WM831x PMICs"
	select MFD_CORE
	depends on I2C
	help
	  Support for the Wolfson Microelecronics WM831x PMICs.  This
	  driver provides common support for accessing the device,
	  additional drivers must be enabled in order to use the
	  functionality of the device.

config MFD_WM8350
	tristate

config MFD_WM8350_CONFIG_MODE_0
	bool
	depends on MFD_WM8350

config MFD_WM8350_CONFIG_MODE_1
	bool
	depends on MFD_WM8350

config MFD_WM8350_CONFIG_MODE_2
	bool
	depends on MFD_WM8350

config MFD_WM8350_CONFIG_MODE_3
	bool
	depends on MFD_WM8350

config MFD_WM8351_CONFIG_MODE_0
	bool
	depends on MFD_WM8350

config MFD_WM8351_CONFIG_MODE_1
	bool
	depends on MFD_WM8350

config MFD_WM8351_CONFIG_MODE_2
	bool
	depends on MFD_WM8350

config MFD_WM8351_CONFIG_MODE_3
	bool
	depends on MFD_WM8350

config MFD_WM8352_CONFIG_MODE_0
	bool
	depends on MFD_WM8350

config MFD_WM8352_CONFIG_MODE_1
	bool
	depends on MFD_WM8350

config MFD_WM8352_CONFIG_MODE_2
	bool
	depends on MFD_WM8350

config MFD_WM8352_CONFIG_MODE_3
	bool
	depends on MFD_WM8350

config MFD_WM8350_I2C
	tristate "Support Wolfson Microelectronics WM8350 with I2C"
	select MFD_WM8350
	depends on I2C
	help
	  The WM8350 is an integrated audio and power management
	  subsystem with watchdog and RTC functionality for embedded
	  systems.  This option enables core support for the WM8350 with
	  I2C as the control interface.  Additional options must be
	  selected to enable support for the functionality of the chip.

config MFD_PCF50633
	tristate "Support for NXP PCF50633"
	depends on I2C
	help
	  Say yes here if you have NXP PCF50633 chip on your board.
	  This core driver provides register access and IRQ handling
	  facilities, and registers devices for the various functions
	  so that function-specific drivers can bind to them.

config MFD_MC13783
	tristate "Support Freescale MC13783"
	depends on SPI_MASTER
	select MFD_CORE
	help
	  Support for the Freescale (Atlas) MC13783 PMIC and audio CODEC.
	  This driver provides common support for accessing  the device,
	  additional drivers must be enabled in order to use the
	  functionality of the device.

config PCF50633_ADC
	tristate "Support for NXP PCF50633 ADC"
	depends on MFD_PCF50633
	help
	 Say yes here if you want to include support for ADC in the
	 NXP PCF50633 chip.

config PCF50633_GPIO
	tristate "Support for NXP PCF50633 GPIO"
	depends on MFD_PCF50633
	help
	 Say yes here if you want to include support GPIO for pins on
	 the PCF50633 chip.

config AB3100_CORE
	tristate "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
	depends on I2C
	default y if ARCH_U300
	help
	  Select this to enable the AB3100 Mixed Signal IC core
	  functionality. This connects to a AB3100 on the I2C bus
	  and expose a number of symbols needed for dependent devices
	  to read and write registers and subscribe to events from
	  this multi-functional IC. This is needed to use other features
	  of the AB3100 such as battery-backed RTC, charging control,
	  LEDs, vibrator, system power and temperature, power management
	  and ALSA sound.

config AB3100_OTP
	tristate "ST-Ericsson AB3100 OTP functions"
	depends on AB3100_CORE
	default y if AB3100_CORE
	help
	  Select this to enable the AB3100 Mixed Signal IC OTP (one-time
	  programmable memory) support. This exposes a sysfs file to read
	  out OTP values.

config EZX_PCAP
	bool "PCAP Support"
	depends on GENERIC_HARDIRQS && SPI_MASTER
	help
	  This enables the PCAP ASIC present on EZX Phones. This is
	  needed for MMC, TouchScreen, Sound, USB, etc..

config MFD_88PM8607
	bool "Support Marvell 88PM8607"
	depends on I2C
	select MFD_CORE
	help
	  This supports for Marvell 88PM8607 Power Management IC. This includes
	  the I2C driver and the core APIs _only_, you have to select
	  individual components like voltage regulators, RTC and
	  battery-charger under the corresponding menus.

endmenu

menu "Multimedia Capabilities Port drivers"
	depends on ARCH_SA1100

config MCP
	tristate

# Interface drivers
config MCP_SA11X0
	tristate "Support SA11x0 MCP interface"
	depends on ARCH_SA1100
	select MCP

# Chip drivers
config MCP_UCB1200
	tristate "Support for UCB1200 / UCB1300"
	depends on MCP

config MCP_UCB1200_TS
	tristate "Touchscreen interface support"
	depends on MCP_UCB1200 && INPUT

endmenu
Commit	Line	Data
	1	#
	2	# Multifunction miscellaneous devices
	3	#
	4
	5	menu "Multifunction device drivers"
	6	depends on HAS_IOMEM
	7
	8	config MFD_CORE
	9	tristate
	10	default n
	11
	12	config MFD_SM501
	13	tristate "Support for Silicon Motion SM501"
	14	---help---
	15	This is the core driver for the Silicon Motion SM501 multimedia
	16	companion chip. This device is a multifunction device which may
	17	provide numerous interfaces including USB host controller, USB gadget,
	18	asynchronous serial ports, audio functions, and a dual display video
	19	interface. The device may be connected by PCI or local bus with
	20	varying functions enabled.
	21
	22	config MFD_SM501_GPIO
	23	bool "Export GPIO via GPIO layer"
	24	depends on MFD_SM501 && GPIOLIB
	25	---help---
	26	This option uses the gpio library layer to export the 64 GPIO
	27	lines on the SM501. The platform data is used to supply the
	28	base number for the first GPIO line to register.
	29
	30	config MFD_ASIC3
	31	bool "Support for Compaq ASIC3"
	32	depends on GENERIC_HARDIRQS && GPIOLIB && ARM
	33	select MFD_CORE
	34	---help---
	35	This driver supports the ASIC3 multifunction chip found on many
	36	PDAs (mainly iPAQ and HTC based ones)
	37
	38	config MFD_SH_MOBILE_SDHI
	39	bool "Support for SuperH Mobile SDHI"
	40	depends on SUPERH
	41	select MFD_CORE
	42	---help---
	43	This driver supports the SDHI hardware block found in many
	44	SuperH Mobile SoCs.
	45
	46	config MFD_DM355EVM_MSP
	47	bool "DaVinci DM355 EVM microcontroller"
	48	depends on I2C && MACH_DAVINCI_DM355_EVM
	49	help
	50	This driver supports the MSP430 microcontroller used on these
	51	boards. MSP430 firmware manages resets and power sequencing,
	52	inputs from buttons and the IR remote, LEDs, an RTC, and more.
	53
	54	config HTC_EGPIO
	55	bool "HTC EGPIO support"
	56	depends on GENERIC_HARDIRQS && GPIOLIB && ARM
	57	help
	58	This driver supports the CPLD egpio chip present on
	59	several HTC phones. It provides basic support for input
	60	pins, output pins, and irqs.
	61
	62	config HTC_PASIC3
	63	tristate "HTC PASIC3 LED/DS1WM chip support"
	64	select MFD_CORE
	65	help
	66	This core driver provides register access for the LED/DS1WM
	67	chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
	68	HTC Magician devices, respectively. Actual functionality is
	69	handled by the leds-pasic3 and ds1wm drivers.
	70
	71	config UCB1400_CORE
	72	tristate "Philips UCB1400 Core driver"
	73	depends on AC97_BUS
	74	depends on GPIOLIB
	75	help
	76	This enables support for the Philips UCB1400 core functions.
	77	The UCB1400 is an AC97 audio codec.
	78
	79	To compile this driver as a module, choose M here: the
	80	module will be called ucb1400_core.
	81
	82	config TPS65010
	83	tristate "TPS6501x Power Management chips"
	84	depends on I2C && GPIOLIB
	85	default y if MACH_OMAP_H2 \|\| MACH_OMAP_H3 \|\| MACH_OMAP_OSK
	86	help
	87	If you say yes here you get support for the TPS6501x series of
	88	Power Management chips. These include voltage regulators,
	89	lithium ion/polymer battery charging, and other features that
	90	are often used in portable devices like cell phones and cameras.
	91
	92	This driver can also be built as a module. If so, the module
	93	will be called tps65010.
	94
	95	config MENELAUS
	96	bool "Texas Instruments TWL92330/Menelaus PM chip"
	97	depends on I2C=y && ARCH_OMAP24XX
	98	help
	99	If you say yes here you get support for the Texas Instruments
	100	TWL92330/Menelaus Power Management chip. This include voltage
	101	regulators, Dual slot memory card transceivers, real-time clock
	102	and other features that are often used in portable devices like
	103	cell phones and PDAs.
	104
	105	config TWL4030_CORE
	106	bool "Texas Instruments TWL4030/TPS659x0 Support"
	107	depends on I2C=y && GENERIC_HARDIRQS
	108	help
	109	Say yes here if you have TWL4030 family chip on your board.
	110	This core driver provides register access and IRQ handling
	111	facilities, and registers devices for the various functions
	112	so that function-specific drivers can bind to them.
	113
	114	These multi-function chips are found on many OMAP2 and OMAP3
	115	boards, providing power management, RTC, GPIO, keypad, a
	116	high speed USB OTG transceiver, an audio codec (on most
	117	versions) and many other features.
	118
	119	config TWL4030_POWER
	120	bool "Support power resources on TWL4030 family chips"
	121	depends on TWL4030_CORE && ARM
	122	help
	123	Say yes here if you want to use the power resources on the
	124	TWL4030 family chips. Most of these resources are regulators,
	125	which have a separate driver; some are control signals, such
	126	as clock request handshaking.
	127
	128	This driver uses board-specific data to initialize the resources
	129	and load scripts controling which resources are switched off/on
	130	or reset when a sleep, wakeup or warm reset event occurs.
	131
	132	config TWL4030_CODEC
	133	bool
	134	depends on TWL4030_CORE
	135	select MFD_CORE
	136	default n
	137
	138	config MFD_TMIO
	139	bool
	140	default n
	141
	142	config MFD_T7L66XB
	143	bool "Support Toshiba T7L66XB"
	144	depends on ARM && HAVE_CLK
	145	select MFD_CORE
	146	select MFD_TMIO
	147	help
	148	Support for Toshiba Mobile IO Controller T7L66XB
	149
	150	config MFD_TC6387XB
	151	bool "Support Toshiba TC6387XB"
	152	depends on ARM && HAVE_CLK
	153	select MFD_CORE
	154	select MFD_TMIO
	155	help
	156	Support for Toshiba Mobile IO Controller TC6387XB
	157
	158	config MFD_TC6393XB
	159	bool "Support Toshiba TC6393XB"
	160	depends on GPIOLIB && ARM
	161	select MFD_CORE
	162	select MFD_TMIO
	163	help
	164	Support for Toshiba Mobile IO Controller TC6393XB
	165
	166	config PMIC_DA903X
	167	bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
	168	depends on I2C=y
	169	help
	170	Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
	171	ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
	172	usually found on PXA processors-based platforms. This includes
	173	the I2C driver and the core APIs _only_, you have to select
	174	individual components like LCD backlight, voltage regulators,
	175	LEDs and battery-charger under the corresponding menus.
	176
	177	config MFD_WM8400
	178	tristate "Support Wolfson Microelectronics WM8400"
	179	select MFD_CORE
	180	depends on I2C
	181	help
	182	Support for the Wolfson Microelecronics WM8400 PMIC and audio
	183	CODEC. This driver provides common support for accessing
	184	the device, additional drivers must be enabled in order to use
	185	the functionality of the device.
	186
	187	config MFD_WM831X
	188	tristate "Support Wolfson Microelectronics WM831x PMICs"
	189	select MFD_CORE
	190	depends on I2C
	191	help
	192	Support for the Wolfson Microelecronics WM831x PMICs. This
	193	driver provides common support for accessing the device,
	194	additional drivers must be enabled in order to use the
	195	functionality of the device.
	196
	197	config MFD_WM8350
	198	tristate
	199
	200	config MFD_WM8350_CONFIG_MODE_0
	201	bool
	202	depends on MFD_WM8350
	203
	204	config MFD_WM8350_CONFIG_MODE_1
	205	bool
	206	depends on MFD_WM8350
	207
	208	config MFD_WM8350_CONFIG_MODE_2
	209	bool
	210	depends on MFD_WM8350
	211
	212	config MFD_WM8350_CONFIG_MODE_3
	213	bool
	214	depends on MFD_WM8350
	215
	216	config MFD_WM8351_CONFIG_MODE_0
	217	bool
	218	depends on MFD_WM8350
	219
	220	config MFD_WM8351_CONFIG_MODE_1
	221	bool
	222	depends on MFD_WM8350
	223
	224	config MFD_WM8351_CONFIG_MODE_2
	225	bool
	226	depends on MFD_WM8350
	227
	228	config MFD_WM8351_CONFIG_MODE_3
	229	bool
	230	depends on MFD_WM8350
	231
	232	config MFD_WM8352_CONFIG_MODE_0
	233	bool
	234	depends on MFD_WM8350
	235
	236	config MFD_WM8352_CONFIG_MODE_1
	237	bool
	238	depends on MFD_WM8350
	239
	240	config MFD_WM8352_CONFIG_MODE_2
	241	bool
	242	depends on MFD_WM8350
	243
	244	config MFD_WM8352_CONFIG_MODE_3
	245	bool
	246	depends on MFD_WM8350
	247
	248	config MFD_WM8350_I2C
	249	tristate "Support Wolfson Microelectronics WM8350 with I2C"
	250	select MFD_WM8350
	251	depends on I2C
	252	help
	253	The WM8350 is an integrated audio and power management
	254	subsystem with watchdog and RTC functionality for embedded
	255	systems. This option enables core support for the WM8350 with
	256	I2C as the control interface. Additional options must be
	257	selected to enable support for the functionality of the chip.
	258
	259	config MFD_PCF50633
	260	tristate "Support for NXP PCF50633"
	261	depends on I2C
	262	help
	263	Say yes here if you have NXP PCF50633 chip on your board.
	264	This core driver provides register access and IRQ handling
	265	facilities, and registers devices for the various functions
	266	so that function-specific drivers can bind to them.
	267
	268	config MFD_MC13783
	269	tristate "Support Freescale MC13783"
	270	depends on SPI_MASTER
	271	select MFD_CORE
	272	help
	273	Support for the Freescale (Atlas) MC13783 PMIC and audio CODEC.
	274	This driver provides common support for accessing the device,
	275	additional drivers must be enabled in order to use the
	276	functionality of the device.
	277
	278	config PCF50633_ADC
	279	tristate "Support for NXP PCF50633 ADC"
	280	depends on MFD_PCF50633
	281	help
	282	Say yes here if you want to include support for ADC in the
	283	NXP PCF50633 chip.
	284
	285	config PCF50633_GPIO
	286	tristate "Support for NXP PCF50633 GPIO"
	287	depends on MFD_PCF50633
	288	help
	289	Say yes here if you want to include support GPIO for pins on
	290	the PCF50633 chip.
	291
	292	config AB3100_CORE
	293	tristate "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
	294	depends on I2C
	295	default y if ARCH_U300
	296	help
	297	Select this to enable the AB3100 Mixed Signal IC core
	298	functionality. This connects to a AB3100 on the I2C bus
	299	and expose a number of symbols needed for dependent devices
	300	to read and write registers and subscribe to events from
	301	this multi-functional IC. This is needed to use other features
	302	of the AB3100 such as battery-backed RTC, charging control,
	303	LEDs, vibrator, system power and temperature, power management
	304	and ALSA sound.
	305
	306	config AB3100_OTP
	307	tristate "ST-Ericsson AB3100 OTP functions"
	308	depends on AB3100_CORE
	309	default y if AB3100_CORE
	310	help
	311	Select this to enable the AB3100 Mixed Signal IC OTP (one-time
	312	programmable memory) support. This exposes a sysfs file to read
	313	out OTP values.
	314
	315	config EZX_PCAP
	316	bool "PCAP Support"
	317	depends on GENERIC_HARDIRQS && SPI_MASTER
	318	help
	319	This enables the PCAP ASIC present on EZX Phones. This is
	320	needed for MMC, TouchScreen, Sound, USB, etc..
	321
	322	config MFD_88PM8607
	323	bool "Support Marvell 88PM8607"
	324	depends on I2C
	325	select MFD_CORE
	326	help
	327	This supports for Marvell 88PM8607 Power Management IC. This includes
	328	the I2C driver and the core APIs _only_, you have to select
	329	individual components like voltage regulators, RTC and
	330	battery-charger under the corresponding menus.
	331
	332	endmenu
	333
	334	menu "Multimedia Capabilities Port drivers"
	335	depends on ARCH_SA1100
	336
	337	config MCP
	338	tristate
	339
	340	# Interface drivers
	341	config MCP_SA11X0
	342	tristate "Support SA11x0 MCP interface"
	343	depends on ARCH_SA1100
	344	select MCP
	345
	346	# Chip drivers
	347	config MCP_UCB1200
	348	tristate "Support for UCB1200 / UCB1300"
	349	depends on MCP
	350
	351	config MCP_UCB1200_TS
	352	tristate "Touchscreen interface support"
	353	depends on MCP_UCB1200 && INPUT
	354
	355	endmenu