| 1 | # |
| 2 | # PHY Layer Configuration |
| 3 | # |
| 4 | |
| 5 | menuconfig PHYLIB |
| 6 | tristate "PHY Device support and infrastructure" |
| 7 | depends on NETDEVICES |
| 8 | help |
| 9 | Ethernet controllers are usually attached to PHY |
| 10 | devices. This option provides infrastructure for |
| 11 | managing PHY devices. |
| 12 | |
| 13 | if PHYLIB |
| 14 | |
| 15 | comment "MII PHY device drivers" |
| 16 | |
| 17 | config AQUANTIA_PHY |
| 18 | tristate "Drivers for the Aquantia PHYs" |
| 19 | ---help--- |
| 20 | Currently supports the Aquantia AQ1202, AQ2104, AQR105, AQR405 |
| 21 | |
| 22 | config AT803X_PHY |
| 23 | tristate "Drivers for Atheros AT803X PHYs" |
| 24 | ---help--- |
| 25 | Currently supports the AT8030 and AT8035 model |
| 26 | |
| 27 | config AMD_PHY |
| 28 | tristate "Drivers for the AMD PHYs" |
| 29 | ---help--- |
| 30 | Currently supports the am79c874 |
| 31 | |
| 32 | config MARVELL_PHY |
| 33 | tristate "Drivers for Marvell PHYs" |
| 34 | ---help--- |
| 35 | Currently has a driver for the 88E1011S |
| 36 | |
| 37 | config DAVICOM_PHY |
| 38 | tristate "Drivers for Davicom PHYs" |
| 39 | ---help--- |
| 40 | Currently supports dm9161e and dm9131 |
| 41 | |
| 42 | config QSEMI_PHY |
| 43 | tristate "Drivers for Quality Semiconductor PHYs" |
| 44 | ---help--- |
| 45 | Currently supports the qs6612 |
| 46 | |
| 47 | config LXT_PHY |
| 48 | tristate "Drivers for the Intel LXT PHYs" |
| 49 | ---help--- |
| 50 | Currently supports the lxt970, lxt971 |
| 51 | |
| 52 | config CICADA_PHY |
| 53 | tristate "Drivers for the Cicada PHYs" |
| 54 | ---help--- |
| 55 | Currently supports the cis8204 |
| 56 | |
| 57 | config VITESSE_PHY |
| 58 | tristate "Drivers for the Vitesse PHYs" |
| 59 | ---help--- |
| 60 | Currently supports the vsc8244 |
| 61 | |
| 62 | config TERANETICS_PHY |
| 63 | tristate "Drivers for the Teranetics PHYs" |
| 64 | ---help--- |
| 65 | Currently supports the Teranetics TN2020 |
| 66 | |
| 67 | config SMSC_PHY |
| 68 | tristate "Drivers for SMSC PHYs" |
| 69 | ---help--- |
| 70 | Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs |
| 71 | |
| 72 | config BCM_NET_PHYLIB |
| 73 | tristate |
| 74 | |
| 75 | config BROADCOM_PHY |
| 76 | tristate "Drivers for Broadcom PHYs" |
| 77 | select BCM_NET_PHYLIB |
| 78 | ---help--- |
| 79 | Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464, |
| 80 | BCM5481 and BCM5482 PHYs. |
| 81 | |
| 82 | config BCM_CYGNUS_PHY |
| 83 | tristate "Drivers for Broadcom Cygnus SoC internal PHY" |
| 84 | depends on ARCH_BCM_CYGNUS || COMPILE_TEST |
| 85 | depends on MDIO_BCM_IPROC |
| 86 | select BCM_NET_PHYLIB |
| 87 | ---help--- |
| 88 | This PHY driver is for the 1G internal PHYs of the Broadcom |
| 89 | Cygnus Family SoC. |
| 90 | |
| 91 | Currently supports internal PHY's used in the BCM11300, |
| 92 | BCM11320, BCM11350, BCM11360, BCM58300, BCM58302, |
| 93 | BCM58303 & BCM58305 Broadcom Cygnus SoCs. |
| 94 | |
| 95 | config BCM63XX_PHY |
| 96 | tristate "Drivers for Broadcom 63xx SOCs internal PHY" |
| 97 | depends on BCM63XX |
| 98 | select BCM_NET_PHYLIB |
| 99 | ---help--- |
| 100 | Currently supports the 6348 and 6358 PHYs. |
| 101 | |
| 102 | config BCM7XXX_PHY |
| 103 | tristate "Drivers for Broadcom 7xxx SOCs internal PHYs" |
| 104 | select BCM_NET_PHYLIB |
| 105 | ---help--- |
| 106 | Currently supports the BCM7366, BCM7439, BCM7445, and |
| 107 | 40nm and 65nm generation of BCM7xxx Set Top Box SoCs. |
| 108 | |
| 109 | config BCM87XX_PHY |
| 110 | tristate "Driver for Broadcom BCM8706 and BCM8727 PHYs" |
| 111 | help |
| 112 | Currently supports the BCM8706 and BCM8727 10G Ethernet PHYs. |
| 113 | |
| 114 | config ICPLUS_PHY |
| 115 | tristate "Drivers for ICPlus PHYs" |
| 116 | ---help--- |
| 117 | Currently supports the IP175C and IP1001 PHYs. |
| 118 | |
| 119 | config REALTEK_PHY |
| 120 | tristate "Drivers for Realtek PHYs" |
| 121 | ---help--- |
| 122 | Supports the Realtek 821x PHY. |
| 123 | |
| 124 | config NATIONAL_PHY |
| 125 | tristate "Drivers for National Semiconductor PHYs" |
| 126 | ---help--- |
| 127 | Currently supports the DP83865 PHY. |
| 128 | |
| 129 | config STE10XP |
| 130 | tristate "Driver for STMicroelectronics STe10Xp PHYs" |
| 131 | ---help--- |
| 132 | This is the driver for the STe100p and STe101p PHYs. |
| 133 | |
| 134 | config LSI_ET1011C_PHY |
| 135 | tristate "Driver for LSI ET1011C PHY" |
| 136 | ---help--- |
| 137 | Supports the LSI ET1011C PHY. |
| 138 | |
| 139 | config MICREL_PHY |
| 140 | tristate "Driver for Micrel PHYs" |
| 141 | ---help--- |
| 142 | Supports the KSZ9021, VSC8201, KS8001 PHYs. |
| 143 | |
| 144 | config DP83848_PHY |
| 145 | tristate "Driver for Texas Instruments DP83848 PHY" |
| 146 | ---help--- |
| 147 | Supports the DP83848 PHY. |
| 148 | |
| 149 | config DP83867_PHY |
| 150 | tristate "Drivers for Texas Instruments DP83867 Gigabit PHY" |
| 151 | ---help--- |
| 152 | Currently supports the DP83867 PHY. |
| 153 | |
| 154 | config MICROCHIP_PHY |
| 155 | tristate "Drivers for Microchip PHYs" |
| 156 | help |
| 157 | Supports the LAN88XX PHYs. |
| 158 | |
| 159 | config FIXED_PHY |
| 160 | tristate "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs" |
| 161 | depends on PHYLIB |
| 162 | ---help--- |
| 163 | Adds the platform "fixed" MDIO Bus to cover the boards that use |
| 164 | PHYs that are not connected to the real MDIO bus. |
| 165 | |
| 166 | Currently tested with mpc866ads and mpc8349e-mitx. |
| 167 | |
| 168 | config MDIO_BITBANG |
| 169 | tristate "Support for bitbanged MDIO buses" |
| 170 | help |
| 171 | This module implements the MDIO bus protocol in software, |
| 172 | for use by low level drivers that export the ability to |
| 173 | drive the relevant pins. |
| 174 | |
| 175 | If in doubt, say N. |
| 176 | |
| 177 | config MDIO_GPIO |
| 178 | tristate "Support for GPIO lib-based bitbanged MDIO buses" |
| 179 | depends on MDIO_BITBANG && GPIOLIB |
| 180 | ---help--- |
| 181 | Supports GPIO lib-based MDIO busses. |
| 182 | |
| 183 | To compile this driver as a module, choose M here: the module |
| 184 | will be called mdio-gpio. |
| 185 | |
| 186 | config MDIO_CAVIUM |
| 187 | tristate |
| 188 | |
| 189 | config MDIO_OCTEON |
| 190 | tristate "Support for MDIO buses on Octeon and some ThunderX SOCs" |
| 191 | depends on 64BIT |
| 192 | depends on HAS_IOMEM |
| 193 | select MDIO_CAVIUM |
| 194 | help |
| 195 | This module provides a driver for the Octeon and ThunderX MDIO |
| 196 | buses. It is required by the Octeon and ThunderX ethernet device |
| 197 | drivers on some systems. |
| 198 | |
| 199 | config MDIO_THUNDER |
| 200 | tristate "Support for MDIO buses on ThunderX SOCs" |
| 201 | depends on 64BIT |
| 202 | depends on PCI |
| 203 | select MDIO_CAVIUM |
| 204 | help |
| 205 | This driver supports the MDIO interfaces found on Cavium |
| 206 | ThunderX SoCs when the MDIO bus device appears as a PCI |
| 207 | device. |
| 208 | |
| 209 | |
| 210 | config MDIO_SUN4I |
| 211 | tristate "Allwinner sun4i MDIO interface support" |
| 212 | depends on ARCH_SUNXI |
| 213 | help |
| 214 | This driver supports the MDIO interface found in the network |
| 215 | interface units of the Allwinner SoC that have an EMAC (A10, |
| 216 | A12, A10s, etc.) |
| 217 | |
| 218 | config MDIO_MOXART |
| 219 | tristate "MOXA ART MDIO interface support" |
| 220 | depends on ARCH_MOXART |
| 221 | help |
| 222 | This driver supports the MDIO interface found in the network |
| 223 | interface units of the MOXA ART SoC |
| 224 | |
| 225 | config MDIO_BUS_MUX |
| 226 | tristate |
| 227 | depends on OF_MDIO |
| 228 | help |
| 229 | This module provides a driver framework for MDIO bus |
| 230 | multiplexers which connect one of several child MDIO busses |
| 231 | to a parent bus. Switching between child busses is done by |
| 232 | device specific drivers. |
| 233 | |
| 234 | config MDIO_BUS_MUX_GPIO |
| 235 | tristate "Support for GPIO controlled MDIO bus multiplexers" |
| 236 | depends on OF_GPIO && OF_MDIO |
| 237 | select MDIO_BUS_MUX |
| 238 | help |
| 239 | This module provides a driver for MDIO bus multiplexers that |
| 240 | are controlled via GPIO lines. The multiplexer connects one of |
| 241 | several child MDIO busses to a parent bus. Child bus |
| 242 | selection is under the control of GPIO lines. |
| 243 | |
| 244 | config MDIO_BUS_MUX_MMIOREG |
| 245 | tristate "Support for MMIO device-controlled MDIO bus multiplexers" |
| 246 | depends on OF_MDIO && HAS_IOMEM |
| 247 | select MDIO_BUS_MUX |
| 248 | help |
| 249 | This module provides a driver for MDIO bus multiplexers that |
| 250 | are controlled via a simple memory-mapped device, like an FPGA. |
| 251 | The multiplexer connects one of several child MDIO busses to a |
| 252 | parent bus. Child bus selection is under the control of one of |
| 253 | the FPGA's registers. |
| 254 | |
| 255 | Currently, only 8-bit registers are supported. |
| 256 | |
| 257 | config MDIO_BCM_UNIMAC |
| 258 | tristate "Broadcom UniMAC MDIO bus controller" |
| 259 | depends on HAS_IOMEM |
| 260 | help |
| 261 | This module provides a driver for the Broadcom UniMAC MDIO busses. |
| 262 | This hardware can be found in the Broadcom GENET Ethernet MAC |
| 263 | controllers as well as some Broadcom Ethernet switches such as the |
| 264 | Starfighter 2 switches. |
| 265 | |
| 266 | config MDIO_BCM_IPROC |
| 267 | tristate "Broadcom iProc MDIO bus controller" |
| 268 | depends on ARCH_BCM_IPROC || COMPILE_TEST |
| 269 | depends on HAS_IOMEM && OF_MDIO |
| 270 | help |
| 271 | This module provides a driver for the MDIO busses found in the |
| 272 | Broadcom iProc SoC's. |
| 273 | |
| 274 | endif # PHYLIB |
| 275 | |
| 276 | config MICREL_KS8995MA |
| 277 | tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch" |
| 278 | depends on SPI |