[deliverable/linux.git] / drivers / power / Kconfig

menuconfig POWER_SUPPLY
	bool "Power supply class support"
	help
	  Say Y here to enable power supply class support. This allows
	  power supply (batteries, AC, USB) monitoring by userspace
	  via sysfs and uevent (if available) and/or APM kernel interface
	  (if selected below).

if POWER_SUPPLY

config POWER_SUPPLY_DEBUG
	bool "Power supply debug"
	help
	  Say Y here to enable debugging messages for power supply class
	  and drivers.

config PDA_POWER
	tristate "Generic PDA/phone power driver"
	depends on !S390
	help
	  Say Y here to enable generic power driver for PDAs and phones with
	  one or two external power supplies (AC/USB) connected to main and
	  backup batteries, and optional builtin charger.

config APM_POWER
	tristate "APM emulation for class batteries"
	depends on APM_EMULATION
	help
	  Say Y here to enable support APM status emulation using
	  battery class devices.

config GENERIC_ADC_BATTERY
	tristate "Generic battery support using IIO"
	depends on IIO
	help
	  Say Y here to enable support for the generic battery driver
	  which uses IIO framework to read adc.

config MAX8925_POWER
	tristate "MAX8925 battery charger support"
	depends on MFD_MAX8925
	help
	  Say Y here to enable support for the battery charger in the Maxim
	  MAX8925 PMIC.

config WM831X_BACKUP
	tristate "WM831X backup battery charger support"
	depends on MFD_WM831X
	help
	  Say Y here to enable support for the backup battery charger
	  in the Wolfson Microelectronics WM831x PMICs.

config WM831X_POWER
	tristate "WM831X PMU support"
	depends on MFD_WM831X
	help
	  Say Y here to enable support for the power management unit
	  provided by Wolfson Microelectronics WM831x PMICs.

config WM8350_POWER
        tristate "WM8350 PMU support"
        depends on MFD_WM8350
        help
          Say Y here to enable support for the power management unit
	  provided by the Wolfson Microelectronics WM8350 PMIC.

config TEST_POWER
	tristate "Test power driver"
	help
	  This driver is used for testing. It's safe to say M here.

config BATTERY_88PM860X
	tristate "Marvell 88PM860x battery driver"
	depends on MFD_88PM860X
	help
	  Say Y here to enable battery monitor for Marvell 88PM860x chip.

config BATTERY_DS2760
	tristate "DS2760 battery driver (HP iPAQ & others)"
	depends on W1 && W1_SLAVE_DS2760
	help
	  Say Y here to enable support for batteries with ds2760 chip.

config BATTERY_DS2780
	tristate "DS2780 battery driver"
	depends on HAS_IOMEM
	select W1
	select W1_SLAVE_DS2780
	help
	  Say Y here to enable support for batteries with ds2780 chip.

config BATTERY_DS2781
	tristate "DS2781 battery driver"
	depends on HAS_IOMEM
	select W1
	select W1_SLAVE_DS2781
	help
	  If you enable this you will have the DS2781 battery driver support.

	  The battery monitor chip is used in many batteries/devices
	  as the one who is responsible for charging/discharging/monitoring
	  Li+ batteries.

	  If you are unsure, say N.

config BATTERY_DS2782
	tristate "DS2782/DS2786 standalone gas-gauge"
	depends on I2C
	help
	  Say Y here to enable support for the DS2782/DS2786 standalone battery
	  gas-gauge.

config BATTERY_PMU
	tristate "Apple PMU battery"
	depends on PPC32 && ADB_PMU
	help
	  Say Y here to expose battery information on Apple machines
	  through the generic battery class.

config BATTERY_OLPC
	tristate "One Laptop Per Child battery"
	depends on X86_32 && OLPC
	help
	  Say Y to enable support for the battery on the OLPC laptop.

config BATTERY_TOSA
	tristate "Sharp SL-6000 (tosa) battery"
	depends on MACH_TOSA && MFD_TC6393XB && TOUCHSCREEN_WM97XX
	help
	  Say Y to enable support for the battery on the Sharp Zaurus
	  SL-6000 (tosa) models.

config BATTERY_COLLIE
	tristate "Sharp SL-5500 (collie) battery"
	depends on SA1100_COLLIE && MCP_UCB1200
	help
	  Say Y to enable support for the battery on the Sharp Zaurus
	  SL-5500 (collie) models.

config BATTERY_IPAQ_MICRO
	tristate "iPAQ Atmel Micro ASIC battery driver"
	depends on MFD_IPAQ_MICRO
	help
	  Choose this option if you want to monitor battery status on
	  Compaq/HP iPAQ h3100 and h3600.

config BATTERY_WM97XX
	bool "WM97xx generic battery driver"
	depends on TOUCHSCREEN_WM97XX=y
	help
	  Say Y to enable support for battery measured by WM97xx aux port.

config BATTERY_SBS
        tristate "SBS Compliant gas gauge"
        depends on I2C
        help
	  Say Y to include support for SBS battery driver for SBS-compliant
	  gas gauges.

config BATTERY_BQ27x00
	tristate "BQ27x00 battery driver"
	depends on I2C || I2C=n
	help
	  Say Y here to enable support for batteries with BQ27x00 (I2C/HDQ) chips.

config BATTERY_BQ27X00_I2C
	bool "BQ27200/BQ27500 support"
	depends on BATTERY_BQ27x00
	depends on I2C
	default y
	help
	  Say Y here to enable support for batteries with BQ27x00 (I2C) chips.

config BATTERY_BQ27X00_PLATFORM
	bool "BQ27000 support"
	depends on BATTERY_BQ27x00
	default y
	help
	  Say Y here to enable support for batteries with BQ27000 (HDQ) chips.

config BATTERY_DA9030
	tristate "DA9030 battery driver"
	depends on PMIC_DA903X
	help
	  Say Y here to enable support for batteries charger integrated into
	  DA9030 PMIC.

config BATTERY_DA9052
	tristate "Dialog DA9052 Battery"
	depends on PMIC_DA9052
	help
	  Say Y here to enable support for batteries charger integrated into
	  DA9052 PMIC.

config BATTERY_MAX17040
	tristate "Maxim MAX17040 Fuel Gauge"
	depends on I2C
	help
	  MAX17040 is fuel-gauge systems for lithium-ion (Li+) batteries
	  in handheld and portable equipment. The MAX17040 is configured
	  to operate with a single lithium cell

config BATTERY_MAX17042
	tristate "Maxim MAX17042/17047/17050/8997/8966 Fuel Gauge"
	depends on I2C
	select REGMAP_I2C
	help
	  MAX17042 is fuel-gauge systems for lithium-ion (Li+) batteries
	  in handheld and portable equipment. The MAX17042 is configured
	  to operate with a single lithium cell. MAX8997 and MAX8966 are
	  multi-function devices that include fuel gauages that are compatible
	  with MAX17042. This driver also supports max17047/50 chips which are
	  improved version of max17042.

config BATTERY_Z2
	tristate "Z2 battery driver"
	depends on I2C && MACH_ZIPIT2
	help
	  Say Y to include support for the battery on the Zipit Z2.

config BATTERY_S3C_ADC
	tristate "Battery driver for Samsung ADC based monitoring"
	depends on S3C_ADC
	help
	  Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery

config BATTERY_TWL4030_MADC
	tristate "TWL4030 MADC battery driver"
	depends on TWL4030_MADC
	help
	  Say Y here to enable this dumb driver for batteries managed
	  through the TWL4030 MADC.

config CHARGER_88PM860X
	tristate "Marvell 88PM860x Charger driver"
	depends on MFD_88PM860X && BATTERY_88PM860X
	help
	  Say Y here to enable charger for Marvell 88PM860x chip.

config CHARGER_PCF50633
	tristate "NXP PCF50633 MBC"
	depends on MFD_PCF50633
	help
	 Say Y to include support for NXP PCF50633 Main Battery Charger.

config BATTERY_JZ4740
	tristate "Ingenic JZ4740 battery"
	depends on MACH_JZ4740
	depends on MFD_JZ4740_ADC
	help
	  Say Y to enable support for the battery on Ingenic JZ4740 based
	  boards.

	  This driver can be build as a module. If so, the module will be
	  called jz4740-battery.

config BATTERY_INTEL_MID
	tristate "Battery driver for Intel MID platforms"
	depends on INTEL_SCU_IPC && SPI
	help
	  Say Y here to enable the battery driver on Intel MID
	  platforms.

config BATTERY_RX51
	tristate "Nokia RX-51 (N900) battery driver"
	depends on TWL4030_MADC
	help
	  Say Y here to enable support for battery information on Nokia
	  RX-51, also known as N900 tablet.

config CHARGER_ISP1704
	tristate "ISP1704 USB Charger Detection"
	depends on USB_PHY
	help
	  Say Y to enable support for USB Charger Detection with
	  ISP1707/ISP1704 USB transceivers.

config CHARGER_MAX8903
	tristate "MAX8903 Battery DC-DC Charger for USB and Adapter Power"
	help
	  Say Y to enable support for the MAX8903 DC-DC charger and sysfs.
	  The driver supports controlling charger-enable and current-limit
	  pins based on the status of charger connections with interrupt
	  handlers.

config CHARGER_TWL4030
	tristate "OMAP TWL4030 BCI charger driver"
	depends on TWL4030_CORE
	help
	  Say Y here to enable support for TWL4030 Battery Charge Interface.

config CHARGER_LP8727
	tristate "TI/National Semiconductor LP8727 charger driver"
	depends on I2C
	help
	  Say Y here to enable support for LP8727 Charger Driver.

config CHARGER_LP8788
	tristate "TI LP8788 charger driver"
	depends on MFD_LP8788
	depends on LP8788_ADC
	depends on IIO
	help
	  Say Y to enable support for the LP8788 linear charger.

config CHARGER_GPIO
	tristate "GPIO charger"
	depends on GPIOLIB
	help
	  Say Y to include support for chargers which report their online status
	  through a GPIO pin.

	  This driver can be build as a module. If so, the module will be
	  called gpio-charger.

config CHARGER_MANAGER
	bool "Battery charger manager for multiple chargers"
	depends on REGULATOR && RTC_CLASS
	select EXTCON
	help
          Say Y to enable charger-manager support, which allows multiple
          chargers attached to a battery and multiple batteries attached to a
          system. The charger-manager also can monitor charging status in
          runtime and in suspend-to-RAM by waking up the system periodically
          with help of suspend_again support.

config CHARGER_MAX14577
	tristate "Maxim MAX14577/77836 battery charger driver"
	depends on MFD_MAX14577
	depends on SYSFS
	help
	  Say Y to enable support for the battery charger control sysfs and
	  platform data of MAX14577/77836 MUICs.

config CHARGER_MAX8997
	tristate "Maxim MAX8997/MAX8966 PMIC battery charger driver"
	depends on MFD_MAX8997 && REGULATOR_MAX8997
	help
	  Say Y to enable support for the battery charger control sysfs and
	  platform data of MAX8997/LP3974 PMICs.

config CHARGER_MAX8998
	tristate "Maxim MAX8998/LP3974 PMIC battery charger driver"
	depends on MFD_MAX8998 && REGULATOR_MAX8998
	help
	  Say Y to enable support for the battery charger control sysfs and
	  platform data of MAX8998/LP3974 PMICs.

config CHARGER_BQ2415X
	tristate "TI BQ2415x battery charger driver"
	depends on I2C
	help
	  Say Y to enable support for the TI BQ2415x battery charger
	  PMICs.

	  You'll need this driver to charge batteries on e.g. Nokia
	  RX-51/N900.

config CHARGER_BQ24190
	tristate "TI BQ24190 battery charger driver"
	depends on I2C && GPIOLIB
	help
	  Say Y to enable support for the TI BQ24190 battery charger.

config CHARGER_BQ24735
	tristate "TI BQ24735 battery charger support"
	depends on I2C && GPIOLIB
	help
	  Say Y to enable support for the TI BQ24735 battery charger.

config CHARGER_SMB347
	tristate "Summit Microelectronics SMB347 Battery Charger"
	depends on I2C
	select REGMAP_I2C
	help
	  Say Y to include support for Summit Microelectronics SMB347
	  Battery Charger.

config CHARGER_TPS65090
	tristate "TPS65090 battery charger driver"
	depends on MFD_TPS65090
	help
	 Say Y here to enable support for battery charging with TPS65090
	 PMIC chips.

config AB8500_BM
	bool "AB8500 Battery Management Driver"
	depends on AB8500_CORE && AB8500_GPADC
	help
	  Say Y to include support for AB8500 battery management.

config BATTERY_GOLDFISH
	tristate "Goldfish battery driver"
	depends on GOLDFISH || COMPILE_TEST
	depends on HAS_IOMEM
	help
	  Say Y to enable support for the battery and AC power in the
	  Goldfish emulator.

config BATTERY_RT5033
	tristate "RT5033 fuel gauge support"
	depends on MFD_RT5033
	help
	  This adds support for battery fuel gauge in Richtek RT5033 PMIC.
	  The fuelgauge calculates and determines the battery state of charge
	  according to battery open circuit voltage.

source "drivers/power/reset/Kconfig"

endif # POWER_SUPPLY

source "drivers/power/avs/Kconfig"
Commit	Line	Data
	1	menuconfig POWER_SUPPLY
	2	bool "Power supply class support"
	3	help
	4	Say Y here to enable power supply class support. This allows
	5	power supply (batteries, AC, USB) monitoring by userspace
	6	via sysfs and uevent (if available) and/or APM kernel interface
	7	(if selected below).
	8
	9	if POWER_SUPPLY
	10
	11	config POWER_SUPPLY_DEBUG
	12	bool "Power supply debug"
	13	help
	14	Say Y here to enable debugging messages for power supply class
	15	and drivers.
	16
	17	config PDA_POWER
	18	tristate "Generic PDA/phone power driver"
	19	depends on !S390
	20	help
	21	Say Y here to enable generic power driver for PDAs and phones with
	22	one or two external power supplies (AC/USB) connected to main and
	23	backup batteries, and optional builtin charger.
	24
	25	config APM_POWER
	26	tristate "APM emulation for class batteries"
	27	depends on APM_EMULATION
	28	help
	29	Say Y here to enable support APM status emulation using
	30	battery class devices.
	31
	32	config GENERIC_ADC_BATTERY
	33	tristate "Generic battery support using IIO"
	34	depends on IIO
	35	help
	36	Say Y here to enable support for the generic battery driver
	37	which uses IIO framework to read adc.
	38
	39	config MAX8925_POWER
	40	tristate "MAX8925 battery charger support"
	41	depends on MFD_MAX8925
	42	help
	43	Say Y here to enable support for the battery charger in the Maxim
	44	MAX8925 PMIC.
	45
	46	config WM831X_BACKUP
	47	tristate "WM831X backup battery charger support"
	48	depends on MFD_WM831X
	49	help
	50	Say Y here to enable support for the backup battery charger
	51	in the Wolfson Microelectronics WM831x PMICs.
	52
	53	config WM831X_POWER
	54	tristate "WM831X PMU support"
	55	depends on MFD_WM831X
	56	help
	57	Say Y here to enable support for the power management unit
	58	provided by Wolfson Microelectronics WM831x PMICs.
	59
	60	config WM8350_POWER
	61	tristate "WM8350 PMU support"
	62	depends on MFD_WM8350
	63	help
	64	Say Y here to enable support for the power management unit
	65	provided by the Wolfson Microelectronics WM8350 PMIC.
	66
	67	config TEST_POWER
	68	tristate "Test power driver"
	69	help
	70	This driver is used for testing. It's safe to say M here.
	71
	72	config BATTERY_88PM860X
	73	tristate "Marvell 88PM860x battery driver"
	74	depends on MFD_88PM860X
	75	help
	76	Say Y here to enable battery monitor for Marvell 88PM860x chip.
	77
	78	config BATTERY_DS2760
	79	tristate "DS2760 battery driver (HP iPAQ & others)"
	80	depends on W1 && W1_SLAVE_DS2760
	81	help
	82	Say Y here to enable support for batteries with ds2760 chip.
	83
	84	config BATTERY_DS2780
	85	tristate "DS2780 battery driver"
	86	depends on HAS_IOMEM
	87	select W1
	88	select W1_SLAVE_DS2780
	89	help
	90	Say Y here to enable support for batteries with ds2780 chip.
	91
	92	config BATTERY_DS2781
	93	tristate "DS2781 battery driver"
	94	depends on HAS_IOMEM
	95	select W1
	96	select W1_SLAVE_DS2781
	97	help
	98	If you enable this you will have the DS2781 battery driver support.
	99
	100	The battery monitor chip is used in many batteries/devices
	101	as the one who is responsible for charging/discharging/monitoring
	102	Li+ batteries.
	103
	104	If you are unsure, say N.
	105
	106	config BATTERY_DS2782
	107	tristate "DS2782/DS2786 standalone gas-gauge"
	108	depends on I2C
	109	help
	110	Say Y here to enable support for the DS2782/DS2786 standalone battery
	111	gas-gauge.
	112
	113	config BATTERY_PMU
	114	tristate "Apple PMU battery"
	115	depends on PPC32 && ADB_PMU
	116	help
	117	Say Y here to expose battery information on Apple machines
	118	through the generic battery class.
	119
	120	config BATTERY_OLPC
	121	tristate "One Laptop Per Child battery"
	122	depends on X86_32 && OLPC
	123	help
	124	Say Y to enable support for the battery on the OLPC laptop.
	125
	126	config BATTERY_TOSA
	127	tristate "Sharp SL-6000 (tosa) battery"
	128	depends on MACH_TOSA && MFD_TC6393XB && TOUCHSCREEN_WM97XX
	129	help
	130	Say Y to enable support for the battery on the Sharp Zaurus
	131	SL-6000 (tosa) models.
	132
	133	config BATTERY_COLLIE
	134	tristate "Sharp SL-5500 (collie) battery"
	135	depends on SA1100_COLLIE && MCP_UCB1200
	136	help
	137	Say Y to enable support for the battery on the Sharp Zaurus
	138	SL-5500 (collie) models.
	139
	140	config BATTERY_IPAQ_MICRO
	141	tristate "iPAQ Atmel Micro ASIC battery driver"
	142	depends on MFD_IPAQ_MICRO
	143	help
	144	Choose this option if you want to monitor battery status on
	145	Compaq/HP iPAQ h3100 and h3600.
	146
	147	config BATTERY_WM97XX
	148	bool "WM97xx generic battery driver"
	149	depends on TOUCHSCREEN_WM97XX=y
	150	help
	151	Say Y to enable support for battery measured by WM97xx aux port.
	152
	153	config BATTERY_SBS
	154	tristate "SBS Compliant gas gauge"
	155	depends on I2C
	156	help
	157	Say Y to include support for SBS battery driver for SBS-compliant
	158	gas gauges.
	159
	160	config BATTERY_BQ27x00
	161	tristate "BQ27x00 battery driver"
	162	depends on I2C \|\| I2C=n
	163	help
	164	Say Y here to enable support for batteries with BQ27x00 (I2C/HDQ) chips.
	165
	166	config BATTERY_BQ27X00_I2C
	167	bool "BQ27200/BQ27500 support"
	168	depends on BATTERY_BQ27x00
	169	depends on I2C
	170	default y
	171	help
	172	Say Y here to enable support for batteries with BQ27x00 (I2C) chips.
	173
	174	config BATTERY_BQ27X00_PLATFORM
	175	bool "BQ27000 support"
	176	depends on BATTERY_BQ27x00
	177	default y
	178	help
	179	Say Y here to enable support for batteries with BQ27000 (HDQ) chips.
	180
	181	config BATTERY_DA9030
	182	tristate "DA9030 battery driver"
	183	depends on PMIC_DA903X
	184	help
	185	Say Y here to enable support for batteries charger integrated into
	186	DA9030 PMIC.
	187
	188	config BATTERY_DA9052
	189	tristate "Dialog DA9052 Battery"
	190	depends on PMIC_DA9052
	191	help
	192	Say Y here to enable support for batteries charger integrated into
	193	DA9052 PMIC.
	194
	195	config BATTERY_MAX17040
	196	tristate "Maxim MAX17040 Fuel Gauge"
	197	depends on I2C
	198	help
	199	MAX17040 is fuel-gauge systems for lithium-ion (Li+) batteries
	200	in handheld and portable equipment. The MAX17040 is configured
	201	to operate with a single lithium cell
	202
	203	config BATTERY_MAX17042
	204	tristate "Maxim MAX17042/17047/17050/8997/8966 Fuel Gauge"
	205	depends on I2C
	206	select REGMAP_I2C
	207	help
	208	MAX17042 is fuel-gauge systems for lithium-ion (Li+) batteries
	209	in handheld and portable equipment. The MAX17042 is configured
	210	to operate with a single lithium cell. MAX8997 and MAX8966 are
	211	multi-function devices that include fuel gauages that are compatible
	212	with MAX17042. This driver also supports max17047/50 chips which are
	213	improved version of max17042.
	214
	215	config BATTERY_Z2
	216	tristate "Z2 battery driver"
	217	depends on I2C && MACH_ZIPIT2
	218	help
	219	Say Y to include support for the battery on the Zipit Z2.
	220
	221	config BATTERY_S3C_ADC
	222	tristate "Battery driver for Samsung ADC based monitoring"
	223	depends on S3C_ADC
	224	help
	225	Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery
	226
	227	config BATTERY_TWL4030_MADC
	228	tristate "TWL4030 MADC battery driver"
	229	depends on TWL4030_MADC
	230	help
	231	Say Y here to enable this dumb driver for batteries managed
	232	through the TWL4030 MADC.
	233
	234	config CHARGER_88PM860X
	235	tristate "Marvell 88PM860x Charger driver"
	236	depends on MFD_88PM860X && BATTERY_88PM860X
	237	help
	238	Say Y here to enable charger for Marvell 88PM860x chip.
	239
	240	config CHARGER_PCF50633
	241	tristate "NXP PCF50633 MBC"
	242	depends on MFD_PCF50633
	243	help
	244	Say Y to include support for NXP PCF50633 Main Battery Charger.
	245
	246	config BATTERY_JZ4740
	247	tristate "Ingenic JZ4740 battery"
	248	depends on MACH_JZ4740
	249	depends on MFD_JZ4740_ADC
	250	help
	251	Say Y to enable support for the battery on Ingenic JZ4740 based
	252	boards.
	253
	254	This driver can be build as a module. If so, the module will be
	255	called jz4740-battery.
	256
	257	config BATTERY_INTEL_MID
	258	tristate "Battery driver for Intel MID platforms"
	259	depends on INTEL_SCU_IPC && SPI
	260	help
	261	Say Y here to enable the battery driver on Intel MID
	262	platforms.
	263
	264	config BATTERY_RX51
	265	tristate "Nokia RX-51 (N900) battery driver"
	266	depends on TWL4030_MADC
	267	help
	268	Say Y here to enable support for battery information on Nokia
	269	RX-51, also known as N900 tablet.
	270
	271	config CHARGER_ISP1704
	272	tristate "ISP1704 USB Charger Detection"
	273	depends on USB_PHY
	274	help
	275	Say Y to enable support for USB Charger Detection with
	276	ISP1707/ISP1704 USB transceivers.
	277
	278	config CHARGER_MAX8903
	279	tristate "MAX8903 Battery DC-DC Charger for USB and Adapter Power"
	280	help
	281	Say Y to enable support for the MAX8903 DC-DC charger and sysfs.
	282	The driver supports controlling charger-enable and current-limit
	283	pins based on the status of charger connections with interrupt
	284	handlers.
	285
	286	config CHARGER_TWL4030
	287	tristate "OMAP TWL4030 BCI charger driver"
	288	depends on TWL4030_CORE
	289	help
	290	Say Y here to enable support for TWL4030 Battery Charge Interface.
	291
	292	config CHARGER_LP8727
	293	tristate "TI/National Semiconductor LP8727 charger driver"
	294	depends on I2C
	295	help
	296	Say Y here to enable support for LP8727 Charger Driver.
	297
	298	config CHARGER_LP8788
	299	tristate "TI LP8788 charger driver"
	300	depends on MFD_LP8788
	301	depends on LP8788_ADC
	302	depends on IIO
	303	help
	304	Say Y to enable support for the LP8788 linear charger.
	305
	306	config CHARGER_GPIO
	307	tristate "GPIO charger"
	308	depends on GPIOLIB
	309	help
	310	Say Y to include support for chargers which report their online status
	311	through a GPIO pin.
	312
	313	This driver can be build as a module. If so, the module will be
	314	called gpio-charger.
	315
	316	config CHARGER_MANAGER
	317	bool "Battery charger manager for multiple chargers"
	318	depends on REGULATOR && RTC_CLASS
	319	select EXTCON
	320	help
	321	Say Y to enable charger-manager support, which allows multiple
	322	chargers attached to a battery and multiple batteries attached to a
	323	system. The charger-manager also can monitor charging status in
	324	runtime and in suspend-to-RAM by waking up the system periodically
	325	with help of suspend_again support.
	326
	327	config CHARGER_MAX14577
	328	tristate "Maxim MAX14577/77836 battery charger driver"
	329	depends on MFD_MAX14577
	330	depends on SYSFS
	331	help
	332	Say Y to enable support for the battery charger control sysfs and
	333	platform data of MAX14577/77836 MUICs.
	334
	335	config CHARGER_MAX8997
	336	tristate "Maxim MAX8997/MAX8966 PMIC battery charger driver"
	337	depends on MFD_MAX8997 && REGULATOR_MAX8997
	338	help
	339	Say Y to enable support for the battery charger control sysfs and
	340	platform data of MAX8997/LP3974 PMICs.
	341
	342	config CHARGER_MAX8998
	343	tristate "Maxim MAX8998/LP3974 PMIC battery charger driver"
	344	depends on MFD_MAX8998 && REGULATOR_MAX8998
	345	help
	346	Say Y to enable support for the battery charger control sysfs and
	347	platform data of MAX8998/LP3974 PMICs.
	348
	349	config CHARGER_BQ2415X
	350	tristate "TI BQ2415x battery charger driver"
	351	depends on I2C
	352	help
	353	Say Y to enable support for the TI BQ2415x battery charger
	354	PMICs.
	355
	356	You'll need this driver to charge batteries on e.g. Nokia
	357	RX-51/N900.
	358
	359	config CHARGER_BQ24190
	360	tristate "TI BQ24190 battery charger driver"
	361	depends on I2C && GPIOLIB
	362	help
	363	Say Y to enable support for the TI BQ24190 battery charger.
	364
	365	config CHARGER_BQ24735
	366	tristate "TI BQ24735 battery charger support"
	367	depends on I2C && GPIOLIB
	368	help
	369	Say Y to enable support for the TI BQ24735 battery charger.
	370
	371	config CHARGER_SMB347
	372	tristate "Summit Microelectronics SMB347 Battery Charger"
	373	depends on I2C
	374	select REGMAP_I2C
	375	help
	376	Say Y to include support for Summit Microelectronics SMB347
	377	Battery Charger.
	378
	379	config CHARGER_TPS65090
	380	tristate "TPS65090 battery charger driver"
	381	depends on MFD_TPS65090
	382	help
	383	Say Y here to enable support for battery charging with TPS65090
	384	PMIC chips.
	385
	386	config AB8500_BM
	387	bool "AB8500 Battery Management Driver"
	388	depends on AB8500_CORE && AB8500_GPADC
	389	help
	390	Say Y to include support for AB8500 battery management.
	391
	392	config BATTERY_GOLDFISH
	393	tristate "Goldfish battery driver"
	394	depends on GOLDFISH \|\| COMPILE_TEST
	395	depends on HAS_IOMEM
	396	help
	397	Say Y to enable support for the battery and AC power in the
	398	Goldfish emulator.
	399
	400	config BATTERY_RT5033
	401	tristate "RT5033 fuel gauge support"
	402	depends on MFD_RT5033
	403	help
	404	This adds support for battery fuel gauge in Richtek RT5033 PMIC.
	405	The fuelgauge calculates and determines the battery state of charge
	406	according to battery open circuit voltage.
	407
	408	source "drivers/power/reset/Kconfig"
	409
	410	endif # POWER_SUPPLY
	411
	412	source "drivers/power/avs/Kconfig"